Summary: Depends on D19137. Ref T13088. This allows `rebuild-log` to skip work if the chunks are already compressed. It also prepares for a future GC which is looking for "text" or "gzip" chunks to throw away in favor of archival into Files; such a GC can use this column to find collectable logs and then write "file" to it, meaning "chunks are gone, this data is only available in Files".
Test Plan: Ran migration, saw logs populate as "text". Ran `rebuild-log`, saw logs rebuild as "gzip".
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19138
Summary: Depends on D19135. Ref T13088. Denormalize the total log size onto the log itself. This makes reasoning about the log at display time easier, and we don't need to fish around in the database as much to figure out what we're dealing with.
Test Plan: Ran `bin/harbormaster rebuild-log`, saw an existing log populate. Ran `bin/harbormaster write-log`, saw new log write with proper length information.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19136
Summary: Depends on D19131. Ref T13088. During log finalization, stream the log into Files to support "Download Log", archive to Files, and API access.
Test Plan: Ran `write-log` and `rebuild-log`, saw Files objects generate with log content and appropriate permissions.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19132
Summary:
Ref T13090. The default width changed recently to become much wider, but the behavior on this control isn't great. Instead:
- Pick a default width somewhere between the two.
- Make the width sticky across show/hide (pressing "f" twice remembers your width instead of resetting it).
- Make the width sticky across reloads (dragging the bar, then reloading the page keeps the bar in the same place).
Test Plan:
- Without settings, loaded page: got medium-width bar.
- Dragged bar wide/narrow, toggled on/off with "f", got persistent width.
- Dragged bar wide/narrow, reloaded page, got persistent width.
- Dragged bar wide/narrow, toggled it off, reloaded page, toggled it on, got persistent width.
Maniphest Tasks: T13090
Differential Revision: https://secure.phabricator.com/D19129
Summary:
Ref T13083. Facts has a fair amount of weird hardcoding and duplication of responsibilities. Reduce this somewhat: no more hard-coded fact aggregates, no more database-driven list of available facts, etc. Generally, derive all objective truth from FactEngines. This is more similar to how most other modern applications work.
For clarity, hopefully: rename "FactSpec" to "Fact". Rename "RawFact" to "Datapoint".
Split the fairly optimistic "RawFact" table into an "IntDatapoint" table with less stuff in it, then dimension tables for the object PHIDs and key names. This is primarily aimed at reducing the row size of each datapoint. At the time I originally wrote this code we hadn't experimented much with storing similar data in multiple tables, but this is now more common and has worked well elsewhere (CustomFields, Edges, Ferret) so I don't anticipate this causing issues. If we need more complex or multidimension/multivalue tables later we can accommodate them. The queries a single table supports (like "all facts of all kinds in some time window") don't make any sense as far as I can tell and could likely be UNION ALL'd anyway.
Remove all the aggregation stuff for now, it's not really clear to me what this should look like.
Test Plan: Ran `bin/fact analyze` and viewed web UI. Nothing exploded too violently.
Subscribers: yelirekim
Maniphest Tasks: T13083
Differential Revision: https://secure.phabricator.com/D19119
Summary:
Ref T13077. The autosuggester is a little too eager right now, and will eat carriage returns after typing `[` if you never activate the tokenizer.
To fix this, try just canceling sooner. If that doesn't work, we might need to cancel more eagerly by testing to see if the tokenizer is actually open.
Test Plan: Typed `[x]<return>`, got my return instead of getting trapped by the autosuggester.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19110
Summary: Depends on D19107. Ref T13077. The underlying datasource may need some adjustment but this appears to work properly locally.
Test Plan: Typed `[[ por` locally, was suggested "Porcupine Facts". Typed `[[ / ]]`, saw it render as a reference to the wiki root instead of the install root.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19108
Summary:
Depends on D19106. Fixes T5941. Ref T13077. Allows you to find Phriction documents as suggestions from global quick search.
Also supports `w` to jump to Phriction and `w query` to query Phriction.
The actual query logic for the datasource may need some tweaking after it collides with reality, but seems to produce fairly reasonable results in local testing against synthetic data.
Test Plan: Searched for "Porcupine Facts", "Travel Companions", and other useful local pages. Searched for `w`. Searched for `w zebra facts`.
Maniphest Tasks: T13077, T5941
Differential Revision: https://secure.phabricator.com/D19107
Summary:
Depends on D19099. Ref T13077. Updates Phriction documents to string constants to make API interactions cleaner and statuses more practical to extend.
This does not seem to require any transaction migrations because none of the Phriction transactions actually store status values: status is always a side effect of other edits.
Test Plan: Created, edited, deleted, moved documents. Saw appropriate UI cues. Browsed and filtered documents by status in the index.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19100
Summary:
Depends on D19095. Ref T6203. Ref T13077. This column is nullable in an inconsistent way. Make it non-nullable.
Also clean up one more content query on the history view.
Test Plan: Ran migration, then created and edited documents without providing a descriptino or hitting `NULL` exceptions.
Maniphest Tasks: T13077, T6203
Differential Revision: https://secure.phabricator.com/D19096
Summary: Ref T13077. Prepares for modern API access to document history using standard "v3" APIs.
Test Plan: Ran migration, verified PHIDs appeared in the database. Created/edited a document, got even more PHIDs in the database.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19092
Summary:
Ref T13072. See PHI361. The bug in T10746 where aborting builds didn't propagate properly to the buildable was fixed, but existing builds are still stuck "Building".
Since it doesn't look like anything will moot this before these changes promote to `stable`, just migrate these builds into "failed".
Test Plan: Ran migration, saw it affect only relevant builds and correctly fail them.
Maniphest Tasks: T13072
Differential Revision: https://secure.phabricator.com/D19091
Summary: Fixes T13080. The banner wasn't properly included in the sleep/wake logic.
Test Plan:
Mentioned `Dxxx` on a task. Enabled persistent chat to activate Quicksand. Reloaded page. Clicked `Dxxx`. Scrolled down until a changeset header appeared. Pressed back button.
- Before patch: ended up on task, with header still around.
- After patch: ended up on task, with header properly vanquished.
Pressed "forward", ended up back on the revision with the header again.
Maniphest Tasks: T13080
Differential Revision: https://secure.phabricator.com/D19086
Summary: Ref T13054. Companion storage change for D19062.
Test Plan: Applied migration and adjustments. Viewed messages in Harbormaster; created them with `harbormaster.sendmessage`; processed them with `bin/phd debug task`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054
Differential Revision: https://secure.phabricator.com/D19063
Summary: Depends on D19056. Fixes T8475. Ref T13054. Merges "ModernHunk" back into "Hunk".
Test Plan: Grepped for `modernhunk`. Reviewed revisions. Created a new revision. Used `bin/differential migrate-hunk` to migrate hunks between storage formats and back.
Maniphest Tasks: T13054, T8475
Differential Revision: https://secure.phabricator.com/D19057
Summary: Ref T13054. Ref T8475. This table has had no readers or writers for more than a year after it was migrated to the modern table.
Test Plan: Ran migration, verified that all the data was still around.
Maniphest Tasks: T13054, T8475
Differential Revision: https://secure.phabricator.com/D19056
Summary: These transaction constants are flipped, which can produce the wrong result in some cases.
Test Plan: `./bin/storage upgrade -f --apply phabricator:20180208.maniphest.02.populate.php`
Differential Revision: https://secure.phabricator.com/D19054
Summary: Ref T11330. Adds general support for webhooks. This is still rough and missing a lot of pieces -- and not yet useful for anything -- but can make HTTP requests.
Test Plan: Used `bin/webhook call ...` to complete requests to a test endpoint.
Maniphest Tasks: T11330
Differential Revision: https://secure.phabricator.com/D19045
Summary: See PHI356. Adds inline comment and done counts to the filetree. Also makes the filetree wider by default.
Test Plan: Fiddled with filetrees in different browsers on different revisions. Added inlines, marked them done/undone.
Differential Revision: https://secure.phabricator.com/D19041
Summary: See PHI356. Makes it easier to pick out change types in the filetree view in Differential.
Test Plan: Created a diff with adds, copies, moves, deletions, and binary files. Viewed in Differential, had an easier time picking stuff out.
Differential Revision: https://secure.phabricator.com/D19040
Summary:
Ref T4434. Although some of the use cases for this data are better fits for Facts, this data is reasonable to track separately.
I have an approximate view of it already ("closed, ordered by date modified") that's useful to review things that were fixed recently. This lets us make that view more effective.
This just adds (and populates) the storage. Followups will add Conduit, Export, Search, and UI support.
This is slightly tricky because merges work oddly (see T13020).
Test Plan:
- Ran migration, checked database for sensible results.
- Created a task in open/closed status, got the right database values.
- Modified a task to close/open it, got the right values.
- Merged an open task, got updates.
Maniphest Tasks: T4434
Differential Revision: https://secure.phabricator.com/D19037
Summary: Ref T13053. See PHI126. Add an explicit "Mute" action to kill mail and notifications for a particular object.
Test Plan: Muted and umuted an object while interacting with it. Saw mail route appropriately.
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19033
Summary:
Depends on D19012. Ref T13053. In D19012, I've changed "Thread-Topic" to always use PHIDs.
This change drops the selective on-object storage we have to track the original, human-readable title for objects.
Even if we end up backing out the "Thread-Topic" change, we'd be better off storing this in a table in the Mail app which just has `<objectPHID, first subject we used when sending mail for that object>`, since then we get the right behavior without needing every object to have this separate field.
Test Plan: Grepped for `original`, `originalName`, `originalTitle`, etc.
Reviewers: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19013
Summary:
This is currently `🎉`, which I'd never have guessed.
(This isn't a super scalable approach, but this emoji is in particularly common use. See also T12644.)
Test Plan: Typed `:party`, `:confet`, etc.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18993
Summary: See PHI333. Some of the cleanup at the tail end of the bulk edit changes made "Assign To" stop working properly, since we don't strip the `array(...)` off the `array(PHID)` value we receive.
Test Plan:
- Used bulk editor to assign and unassign tasks (single value datasource).
- Used bulk editor to change projects (multi-value datasource).
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18975
Summary:
See PHI325. When a transaction group in Differential (or Pholio) only has an inline comment, it renders with a "V" caret but no actual dropdown menu.
This caret renders in a "disabled" color, but the color is "kinda grey". The "active" color is "kinda grey with a dab of blue". Here's what they look like today:
{F5401581}
Just remove it.
Test Plan: Viewed one of these, no longer saw the inactive caret.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18963
When we change a nullable column to a non-nullable column, we can get a
data truncation error if any value was "NULL".
This is exceptionally unusual, but our two very oldest Herald rules have
a "NULL" policy on `secure`.
Summary:
Depends on D18939. Ref T13047. Symbol lookup can be activated from a diff (in Differential or Diffusion) or from the static view of a file at a particular commit.
In the latter case, we need to figure out the path a little differently. The character and line number approaches still work as written.
Test Plan:
- Command-clicked symbols in the Diffusion browse view with blame on and off; saw path, line and char populate properly.
- Command-clicked symbols in Differential diff view to check I didn't break anything.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13047
Differential Revision: https://secure.phabricator.com/D18940
Summary: Depends on D18937. Ref T13047. When available, provide character positions so external indexers can return more accurate results.
Test Plan: Clicked symbols in Safari, Firefox and Chrome, got sensible-looking character positions.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13047
Differential Revision: https://secure.phabricator.com/D18939
Summary:
Ref T13047. In some reasonable cases, knowing the path and line number where a symbol appears is useful in ranking or filtering the set of matching symbols.
Giving symbol sources more information can't hurt, and it's generally free for us to include this context since we just need to grab it out of the document and pass it along.
We can't always get this data (for example, if a user types `s idx` into global search, we have no clue) but this is similar to other types of context which are only available sometimes (like which repository a symbol appears in).
Test Plan: Command-clicked some symbols in 1-up (unified) and 2-up (side-by-side) diff views with symbol indexes configured. Got accurate path and line information in the URI I was redirected to.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13047
Differential Revision: https://secure.phabricator.com/D18936
Summary:
Depends on D18926. Ref T6203. Ref T13048. Herald rule repetition policies are stored as integers but treated as strings in most contexts.
After D18926, the integer stuff is almost totally hidden inside `HeraldRule` and getting rid of it completely isn't too tricky.
Do so now.
Test Plan:
- Created "only the first time" and "every time" rules. Did a SELECT on their rows in the database.
- Ran migrations, got a clean bill of health from `storage adjust`.
- Did another SELECT on the rows, saw a faithful conversion to strings "every" and "first".
- Edited and reviewed rules, swapping them between "every" and "first".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048, T6203
Differential Revision: https://secure.phabricator.com/D18927
Summary:
Ref T13048. This migration is from January 2012 and probably only impacted Facebook.
It references `HeraldRepetitionPolicyConfig`, which I'd like to change significantly. I initially just replaced the constant with a literal `0`, but I don't think there's any actual value in retaining this migration nowadays.
The cost of removing this migration is: if you installed Phabricator before January 2012 and haven't upgraded since then, you'll have a few more rows in the `APPLIED` table than necessary. Herald will still work correctly.
Test Plan: Reading.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048
Differential Revision: https://secure.phabricator.com/D18924
Summary:
Depends on D18907. Ref T13043. Ref T12509. We have some weird old password digest behavior that isn't terribly concerning, but also isn't great.
Specifically, old passwords were digested in weird ways before being hashed. Notably, account passwords were digested with usernames, so your password stops working if your username is chagned. Not the end of the world, but silly.
Mark all existing hashes as "v1", and automatically upgrade then when they're used or changed. Some day, far in the future, we could stop supporting these legacy digests and delete the code and passwords and just issue upgrade advice ("Passwords which haven't been used in more than two years no longer work."). But at least get things on a path toward sane, modern behavior.
Test Plan: Ran migration. Spot-checked that everthing in the database got marked as "v1". Used an existing password to login successfully. Verified that it was upgraded to a `null` (modern) digest. Logged in with it again.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043, T12509
Differential Revision: https://secure.phabricator.com/D18908
Summary:
Ref T13043. After D18903, this data has migrated to shared infrastructure and has no remaining readers or writers.
Just delete it now, since the cost of a mistake here is very small (users need to "Forgot Password?" and pick a new password).
Test Plan: Grepped for `passwordHash`, `passwordSalt`, and variations.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18904
Summary:
Ref T13043. This moves user account passwords to the new shared infrastructure.
There's a lot of code changes here, but essentially all of it is the same as the VCS password logic in D18898.
Test Plan:
- Ran migration.
- Spot checked table for general sanity.
- Logged in with an existing password.
- Hit all error conditions on "change password", "set password", "register new account" flows.
- Verified that changing password logs out other sessions.
- Verified that revoked passwords of a different type can't be selected.
- Changed passwords a bunch.
- Verified that salt regenerates properly after password change.
- Tried to login with the wrong password, which didn't work.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18903
Summary:
Ref T13043. In D18898 I moved VCS passwords to the new shared infrastructure.
Before account passwords can move, we need to make two changes:
- For legacy reasons, VCS passwords and Account passwords have different "digest" algorithms. Both are more complicated than they should be, but we can't easily fix it without breaking existing passwords. Add a `PasswordHashInterface` so that objects which can have passwords hashes can implement custom digest logic for each password type.
- Account passwords have a dedicated external salt (`PhabricatorUser->passwordSalt`). This is a generally reasonable thing to support (since not all hashers are self-salting) and we need to keep it around so existing passwords still work. Add salt support to `AuthPassword` and make it generate/regenerate when passwords are updated.
Then add a nice story about password digestion.
Test Plan: Ran migrations. Used an existing VCS password; changed VCS password. Tried to use a revoked password. Unit tests still pass. Grepped for callers to legacy `PhabricatorHash::digestPassword()`, found none.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18900
Summary:
Ref T13043. After D18898, this has been migrated to new, more modern storage and no longer has any readers or writers.
One migration from long ago (early 2014) is affected. Since this is ancient and the cost of dropping this is small (see inline), I just dropped it.
I'll note this in the changelog.
Test Plan: Ran migrations, got a clean bill of health from `storage status`. Grepped for removed symbol.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18899
Summary:
Ref T13043. Migrate VCS passwords away from their dedicated table to new the new shared infrastructure.
Future changes will migrate account passwords and remove the old table.
Test Plan:
- Ran migrations.
- Cloned with the same password that was configured before the migrations (worked).
- Cloned with a different, invalid password (failed).
- Changed password.
- Cloned with old password (failed).
- Cloned with new password (worked).
- Deleted password in web UI.
- Cloned with old password (failed).
- Set password to the same password as it currently is set to (worked, no "unique" collision).
- Set password to account password. !!This (incorrectly) works for now until account passwords migrate, since the uniqueness check can't see them yet.!!
- Set password to a new unique password.
- Cloned (worked).
- Revoked the password with `bin/auth revoke`.
- Verified web UI shows "no password set".
- Verified that pull no longer works.
- Verified that I can no longer select the revoked password.
- Verified that accounts do not interact:
- Tried to set account B to account A's password (worked).
- Tried to set account B to a password revoked on account A (worked).
- Spot checked the `password` and `passwordtransaction` tables for saniity.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18898
Summary:
Ref T13043. Currently:
- Passwords are stored separately in the "VCS Passwords" and "User" tables and don't share as much code as they could.
- Because User objects are all over the place in the code, password hashes are all over the place too (i.e., often somewhere in process memory). This is a very low-severity, theoretical sort of issue, but it could make leaving a stray `var_dump()` in the code somewhere a lot more dangerous than it otherwise is. Even if we never do this, third-party developers might. So it "feels nice" to imagine separating this data into a different table that we rarely load.
- Passwords can not be //revoked//. They can be //deleted//, but users can set the same password again. If you believe or suspect that a password may have been compromised, you might reasonably prefer to revoke it and force the user to select a //different// password.
This change prepares to remedy these issues by adding a new, more modern dedicated password storage table which supports storing multiple password types (account vs VCS), gives passwords real PHIDs and transactions, supports DestructionEngine, supports revocation, and supports `bin/auth revoke`.
It doesn't actually make anything use this new table yet. Future changes will migrate VCS passwords and account passwords to this table.
(This also gives third party applications a reasonable place to store password hashes in a consistent way if they have some need for it.)
Test Plan: Added some basic unit tests to cover general behavior. This is just skeleton code for now and will get more thorough testing when applications move.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18894
Summary:
See PHI173. Currently, Herald has an "Assign to" action for tasks, and you can specify custom fields with datasource values (like users or projects) that have a limit (like 1 "Owner", or 12 "Jury Members").
Herald doesn't support these limits right now, so you can write `[ Assign to ][ X, Y, Z ]`. This just means "Assign to X", but make it more clear by actually enforcing the limit in the UI.
Test Plan:
- Created a "projects" custom field with limit 1.
- Tried to create actions that 'assign to' or 'set custom field to' more than one thing, got helpfully rebuffed by the UI.
- Created an "add subscribers" action with more than one value.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18887
Summary:
Fixes T13042. This hooks up the new "silent" mode from D18882 and makes it actually work.
The UI (where we tell you to go run some command and then reload the page) is pretty clumsy, but should solve some problems for now and can be cleaned up eventually. The actual mechanics (timeline aggregation, Herald interaction, etc.) are on firmer ground.
Test Plan:
- Made a normal bulk edit, got mail and feed stories.
- Made a silent bulk edit, no mail and no feed.
- Saw "Silent Edit" marker in timeline for silent edits:
{F5386245}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13042
Differential Revision: https://secure.phabricator.com/D18883
Summary: Ref T13025. We're getting kind of a lot of actions, so put them in nice groups so they're easier to work with.
Test Plan: {F5386038}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18880
Summary:
Depends on D18866. Ref T13025. Fixes T12415. This makes the old "Add Comment" action work, and adds support for a new "Set description to" action (possibly, I could imagine "append description" being useful some day, maybe).
The implementation is just a `<textarea />`, not a whole fancy remarkup box with `[Bold] [Italic] ...` buttons, preview, typeaheads, etc. It would be nice to enrich this eventually but doing the rendering in pure JS is currently very involved.
This requires a little bit of gymnastics to get the transaction populated properly, and adds some extra validation since we need some code there anyway.
Test Plan:
- Changed the description of a task via bulk editor.
- Added a comment to a task via bulk editor.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T12415
Differential Revision: https://secure.phabricator.com/D18867
Summary:
Depends on D18862. See PHI173. Ref T13025. Fixes T10005. This redefines bulk edits in terms of EditEngine fields, rather than hard-coding the whole thing.
Only text fields -- and, specifically, only the "Title" field -- are supported after this change. Followup changes will add more bulk edit parameter types and broader field support.
However, the title field now works without any Maniphest-specific code, outside of the small amount of binding code in the `ManiphestBulkEditor` subclass.
Test Plan: Used the bulk edit workflow to change the titles of tasks.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T10005
Differential Revision: https://secure.phabricator.com/D18863
Summary:
Depends on D18805. Ref T13025. Fixes T10268.
Instead of using a list of IDs for the bulk editor, power it with SearchEngine queries. This gives us the full power of SearchEngine and lets us use a query key instead of a list of 20,000 IDs to avoid issues with URL lengths.
Also, split it into a base `BulkEngine` and per-application subclasses. This moves us toward T10005 and universal support for bulk operations.
Also:
- Renames most of "batch" to "bulk": we're curently inconsitent about this, I like "bulk" better since I think it's more clear if you don't regularly interact with `.bat` files, and newer stuff mostly uses "bulk".
- When objects in the result set can't be edited because you don't have permission, show the status more clearly.
This probably breaks some stuff a bit since I refactored so heavily, but it seems mostly OK from poking around. I'll clean up anything I missed in followups to deal with remaining items on T13025.
Test Plan:
{F5302300}
- Bulk edited from Maniphest.
- Bulk edited from a workboard (no more giant `?ids=....` in the URL).
- Hit most of the error conditions, I think?
- Clicked the "Cancel" button.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T10268
Differential Revision: https://secure.phabricator.com/D18806
Summary:
Ref T13025. See PHI50. Fixes T11286. Ref T10005. Begin modernizing the bulk editor.
For T10005 ("move the bulk editor to modern infrastructure"), rewrite the rendering of the editable set so that it is application-agnostic and can work with any kind of object.
For T11286 ("let users de-select items in the working set"), make the working set editable.
Test Plan:
{F5302158}
- Deselected some objects, applied an edit, saw the edit apply to only selected objects.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T11286, T10005
Differential Revision: https://secure.phabricator.com/D18805
Summary:
See PHI242. All use cases for this that I know of are pretty hacky, but they don't seem perilous, and it's easier than webhooks.
See P1895, T10183, and T9853 for me previously refusing to implement this since all those use cases were also pretty bad.
Test Plan:
- Wrote a rule to add comments, saw it add comments.
- Reviewed summary, re-edited rule, reviewed transcript to check that all the strings worked OK.
- Wrote a new rule for a non-commentable object (a blog) to make sure I wasn't offered the "Add a comment" action.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18823
Summary:
Ref T10233. See PHI231. When users ignore the `arc land` prompt about bad revision states, make it explicitly clear in the transaction log that they broke the rules.
You can currently figure this out by noticing that there's no "This revision is accepted and ready to land." message, but it's unrealistic to expect non-expert users to look for the //absence// of a message to indicate something, and this state change is often relevant.
Test Plan: {F5302351}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10233
Differential Revision: https://secure.phabricator.com/D18808
