Summary:
Fixes T11295. Prior to this change, the "404 page" for daemon tasks fatals.
This page is special cased a little bit and not a normal 404 page, because it's possible for you to click a valid link and the task to get GC'd by the time you load the page, or similar. It tries to be a little more user-friendly than a bare 404.
Test Plan:
- Visited `/daemon/task/1428348920328/` (any invalid ID).
- Now got a nice "no such task" page.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11295
Differential Revision: https://secure.phabricator.com/D16254
Summary: Fixes T6806. We haven't seen users having issues with `phd.user` in a very long time.
Test Plan:
- Configured daemons to run as `notepriestley`, got a well-explained exception.
- Configured daemons to run as `epriestley`, got a clean start.
- Configured daemons with `phd.user=null`, got a clean start.
Reviewers: chad, areitz
Reviewed By: areitz
Subscribers: areitz
Maniphest Tasks: T6806
Differential Revision: https://secure.phabricator.com/D15726
Summary:
Ref T10756. This:
- Fixes T7307. This UI is now admin-only.
- Makes the main "running daemons" table more useful for multi-host setups (show where daemons are running).
- Removes logs from the web UI: these are sometimes vaguely sensitive and shouldn't be visible. The UI tells you how to get them with `bin/phd log`.
- Minor modernization.
Test Plan:
- As a non-admin, viewed daemons (access error) and bulk jobs (worked great).
- Browsed bulk job pages.
- Ran a bulk job.
- Viewed daemon console.
- Viewed task detail / daemon detail / daemon list pages.
{F1220516}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7307, T10756
Differential Revision: https://secure.phabricator.com/D15724
Summary: Going to render these all normal case instead of all caps, and bump up the font size. Should be more consistent. Yellow if you green anything orange.
Test Plan: grep, lint
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15645
Summary: Modernize and use newer UI
Test Plan: Bounce around various views.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15574
Summary:
By default, `bin/phd debug` activates `--trace`, which is incredibly verbose.
Instead, be moderately verbose by default, and only include tracing if `--trace` was passed to `bin/phd debug`.
See also D15422.
Test Plan:
- Ran `bin/phd debug task`, got moderate amount of most useful debug output.
- Ran `bin/phd debug task --trace`, got very verbose, detailed low-level debug output.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15423
Summary:
Two minor changes here:
- Replace `get/setUser()` with `get/setViewer()` for consistency with everything else.
- `getViewer()` now throws if no viewer is set. We had a lot of code that either "should" check this but didn't, or did check it in an identical way, duplicating work. In contrast, very little code checks for a viewer but works if one is not present.
Test Plan:
- Grepped for `->user`.
- Attempted to fix all callsites inside `*View` classes.
- Browsed around a bunch of applications, particularly Calendar, Differential and Diffusion, which seemed most heavily affected.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15412
Summary: See Q266.
Test Plan: Created a bulk job, clicked "Details" instead of "Confirm", clicked "Continue" to get back to confirmation dialog.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14985
Summary: Ref T7053. Remove the `envHash` and `envInfo` fields, which are no longer used now that the daemons restart automagically. Depends on D14458.
Test Plan: Saw no more setup issues.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: tycho.tatitscheff, epriestley
Maniphest Tasks: T7053
Differential Revision: https://secure.phabricator.com/D14446
Summary:
Fixes T9494. This:
- Removes all the random GC.x.y.z config.
- Puts it all in one place that's locked and which you use `bin/garbage set-policy ...` to adjust.
- Makes every TTL-based GC configurable.
- Simplifies the code in the actual GCs.
Test Plan:
- Ran `bin/garbage collect` to collect some garbage, until it stopped collecting.
- Ran `bin/garbage set-policy ...` to shorten policy. Saw change in web UI. Ran `bin/garbage collect` again and saw it collect more garbage.
- Set policy to indefinite and saw it not collect garabge.
- Set policy to default and saw it reflected in web UI / `collect`.
- Ran `bin/phd debug trigger` and saw all GCs fire with reasonable looking queries.
- Read new docs.
{F857928}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9494
Differential Revision: https://secure.phabricator.com/D14219
Summary: Use `PhutilClassMaQuery` instead of `PhutilSymbolLoader`, mostly for consistency. Depends on D13588.
Test Plan: Poked around a bunch of pages.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13589
Summary:
Fixes T7370. Two changes:
- Make the default to show nothing, instead of showing all the data. This is a better default because the data is sometimes sensitive. Workers should have to opt in to revealing it.
- For TargetWorkers, link to the target (technically the build, for now, since there's no dedicated target detail page).
Test Plan: {F698325}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7370
Differential Revision: https://secure.phabricator.com/D13845
Summary: Updates the Daemon application calls
Test Plan: Click on various things in the Daemon app
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D13835
Summary:
Ref T8637. This does nothing interesting, just has empty scaffolding for a bulk job queue.
Basic idea is that when you do something like a batch edit in Maniphest, we:
- Create a BulkJob with all the details.
- Queue a worker to start the job.
- Send you to a progress bar page for the job.
In the background:
- The "start job" worker creates a ton of Task objects, then queues worker tasks to do the work.
In the foreground:
- Fancy ajax animates the progress bar and it goes wooosh.
In general:
- Big jobs actually work.
- Jobs get logged.
- You can monitor jobs.
- Terrible junk like T8637 should be much harder to write and much easier to catch and diagnose.
Test Plan:
No interesting code/beahavior yet. Clean `storage adjust`.
{F526411}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8637
Differential Revision: https://secure.phabricator.com/D13392
Summary: Ref T8099, updates table layouts and StatusIcons in the Daemons application.
Test Plan: Click on lots of different things in Daemons.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8099
Differential Revision: https://secure.phabricator.com/D13052
Summary:
In the great `pht()` conversion, some strings like "123,456" are now being printed as numbers with "%d". These come out as "123" instead of "123,456".
Use "%s" and "PhutilNumber" to present numbers with comma groupings.
Test Plan:
- Viewed DarkConsole.
- Viewed conduit logs.
- Viewed daemon logs.
- Grepped for `%d ms` and `%d us`.
Reviewers: btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12979
Summary: Use `__CLASS__` instead of hard-coding class names. Depends on D12605.
Test Plan: Eyeball it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12806
Summary:
Ref T4100. Ref T5595.
To support a unified "Projects:" query across all applications, a future diff is going to add a set of "Edge Logic" capabilities to `PolicyAwareQuery` which write the required SELECT, JOIN, WHERE, HAVING and GROUP clauses for you.
With the addition of "Edge Logic", we'll have three systems which may need to build components of query claues: ordering/paging, customfields/applicationsearch, and edge logic.
For most clauses, queries don't currently call into the parent explicitly to get default components. I want to move more query construction logic up the class tree so it can be shared.
For most methods, this isn't a problem, but many subclasses define a `buildWhereClause()`. Make all such definitions protected and consistent.
This causes no behavioral changes.
Test Plan: Ran `arc unit --everything`, which does a pretty through job of verifying this statically.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: yelirekim, hach-que, epriestley
Maniphest Tasks: T4100, T5595
Differential Revision: https://secure.phabricator.com/D12453
Summary:
Ref T7811. Fixes two minor issues I observed in the cluster:
- Sometimes APC doesn't give us key names. Not sure exactly what's up here, but we can do a better job with this.
- The `%` in `25%` actually needs more escaping, since it's interpreted by both `pht()` (immediately) and `console_format()` (later).
Test Plan:
- First one is just from an error log, not sure how to repro offhand.
- Ran `bin/phd help start` for the second one.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7814, T7811
Differential Revision: https://secure.phabricator.com/D12395
Summary:
Right now, if a daemon dies it can leave the setup warning around for like 10 minutes or something until we reap it.
Tighten the warning so we only care about actively running daemons.
Test Plan: Checked setup issues.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12088
Summary: Swaps out to modern UI components, update for mobile, fix some phts.
Test Plan: Test each Daemon page on desktop and mobile. Verify modern layout.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7427
Differential Revision: https://secure.phabricator.com/D11958
Summary: Since this element isn't strictly about errors, re-label as info view instead.
Test Plan: Grepped for all callsites, tested UIExamples and a few other random pages.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11867
Summary: Ref T7384. This just sends SIGHUP to specified overseers in a nice package.
Test Plan: See D11898.
Reviewers: hach-que, btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T7384
Differential Revision: https://secure.phabricator.com/D11899
Summary:
Fixes T7352. This reduces the memory footprint for instances by combining these two similar daemons into one daemon which handles the responsibilities of both.
The fit isn't 100% perfect here but it's pretty close, and the GC daemon is fairly trivial.
Test Plan:
- Adjusted all the numbers to small numbers (5 second sleep, 120 second GC length).
- Added a ton of logging.
- Started trigger daemon.
- Saw it run a GC cycle.
- Saw it reschedule another cycle after 120 seconds (adjusted down from 4 hours).
- Reverted all the logging/small numbers.
- Ran `bin/phd start`, saw stable trigger daemon running.
- Grepped for removed daemon class name.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11872
Summary: Ref T7352. This is pretty straightforward. I renamed `phd.start-taskmasters` to `phd.taskmasters` for clarity.
Test Plan:
- Ran `phd start`, `phd start --autoscale-reserve 0.25`, `phd restart --autoscale-reserve 0.25`, etc.
- Examined PID file to see options were passed.
- I'm defaulting this off (0 reserve) and making it a flag rather than an option because it's a very advanced feature which is probably not useful outside of instancing.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11871
Summary:
Ref T7352. We were previously identifying things by `<daemonClass, overseerPID, startTime>` but that's not unique in a world where one overseer can run multiple daemons.
We already have an internal "daemonID", it just doesn't get written into the DB right now.
Start writing it, then use it to clean up `phd status`.
Test Plan: Ran `phd status`, got more accurate/useful output than previously.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11865
Summary:
Ref T7352. This isn't wildly useful for us but seems generally reasonable, can be helpful with testing, and @hach-que has a use case for it.
The only reason we issue this warning is to prevent user error; you can still launch all the daemons with `phd launch` manually and daemons all use locks to protect critical regions.
Test Plan: Ran `phd start --force` a bunch, saw zillions of daemons.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, hach-que
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11861
Summary:
Ref T7352. This moves all the daemons under one overseer. The primary goal is to reduce the minimum footprint of an instance in the Phacility cluster, by reducing the number of processes each instance needs to run on daemon-tier hosts.
This improves scalability by roughly a factor of 2.
Test Plan:
- Ran `phd debug`, `phd launch, `phd start`. Saw normal behavior, with only one total overseer.
- Fataled dameons and saw the overseer restar them normally.
- Used `phd status` and `phd stop` and got reasonable results (`phd status` is still a touch off).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11857
Summary: Ref T7352. This makes `phd stop` and `phd status` produce more reasonable output with the new PID file format.
Test Plan: Ran `phd stop`, `phd status`, etc.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11856
Summary:
Ref T7352. This changes `phd` to pass configuration to overseers over stdin. We still run one overseer per daemon.
The "status" stuff needs some cleanup, but it's mostly just UI/cosmetic.
Test Plan:
- Ran `phd debug`, `phd launch`, `phd start`, `phd status`, `phd stop`, etc.
- Verified PID files write in a reasonable format.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11855
Summary: Ref T7352. A couple of the APIs changed slightly with D11851.
Test Plan: See D11851.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11852
Summary: Even if you --force, we can't kill PID 0. This sends the process itself the signal, and terminates it.
Test Plan: See D11786.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11787
Summary:
In the cluster, the box has a ton of stuff that "looks like a daemon" beacuse it is some other instance's daemon.
Stop `phd restart` from complaining about this if given a "--gently" flag, which is like the opposite of "--force".
(I'll make it `stop --force` at the beginning of a whole-box restart to kill stragglers.)
Test Plan: Ran `bin/phd restart --gently`, etc.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11784
Summary:
I'm hitting this in the cluster and couldn't figure it out after staring at it for a couple minutes. Produce a better error.
This dumps a hash of each configuration key value which is set to a non-default value into the daemon log. This is much more compact than the full config, and doesn't spread secrets around, so it seems like a good balance between providing information and going crazy with it.
Test Plan: {F284139}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11699
Summary: Clean up the error view styling.
Test Plan:
Tested as many as I could find, built additional tests in UIExamples
{F280452}
{F280453}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11605
Summary: Ref T6881. This won't do much of interest on third party installs yet, but it's stable and we don't need to hold it back any longer.
Test Plan: Ran `phd start`, saw the trigger daemon start up.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11603
Summary: Select a similar or better FontAwesome icon to represent each application
Test Plan: Visual inspection
Reviewers: epriestley, btrahan
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11489
