Summary:
Fixes T3732. Ref T1205. Ref T3116.
External accounts (like emails used as identities, Facebook accounts, LDAP accounts, etc.) are stored in "ExternalAccount" objects.
Currently, we have a very restrictive `CAN_VIEW` policy for ExternalAccounts, to add an extra layer of protection to make sure users can't use them in unintended ways. For example, it would be bad if a user could link their Phabricator account to a Facebook account without proper authentication. All of the controllers which do sensitive things have checks anyway, but a restrictive CAN_VIEW provided an extra layer of protection. Se T3116 for some discussion.
However, this means that when grey/external users take actions (via email, or via applications like Legalpad) other users can't load the account handles and can't see anything about the actor (they just see "Restricted External Account" or similar).
Balancing these concerns is mostly about not making a huge mess while doing it. This seems like a reasonable approach:
- Add `CAN_EDIT` on these objects.
- Make that very restricted, but open up `CAN_VIEW`.
- Require `CAN_EDIT` any time we're going to do something authentication/identity related.
This is slightly easier to get wrong (forget CAN_EDIT) than other approaches, but pretty simple, and we always have extra checks in place anyway -- this is just a safety net.
I'm not quite sure how we should identify external accounts, so for now we're just rendering "Email User" or similar -- clearly not a bug, but not identifying. We can figure out what to render in the long term elsewhere.
Test Plan:
- Viewed external accounts.
- Linked an external account.
- Refreshed an external account.
- Edited profile picture.
- Viewed sessions panel.
- Published a bunch of stuff to Asana/JIRA.
- Legalpad signature page now shows external accounts.
{F171595}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3732, T1205, T3116
Differential Revision: https://secure.phabricator.com/D9767
Summary: Ran `arc lint --apply-patches --everything` over rP, mainly to change double quotes to single quotes where appropriate. These changes also validate that the `ArcanistXHPASTLinter::LINT_DOUBLE_QUOTE` rule is working as expected.
Test Plan: Eyeballed it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9431
Summary: Ref T5089. Adds a `security.require-multi-factor-auth` which forces all users to enroll in MFA before they can use their accounts.
Test Plan:
Config:
{F159750}
Roadblock:
{F159748}
After configuration:
{F159749}
- Required MFA, got roadblocked, added MFA, got unblocked.
- Removed MFA, got blocked again.
- Used `bin/auth strip` to strip MFA, got blocked.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5089
Differential Revision: https://secure.phabricator.com/D9285
Summary: Both email verify and welcome links now verify email, centralize them and record them in the user activity log.
Test Plan:
- Followed a "verify email" link and got verified.
- Followed a "welcome" (verifying) link.
- Followed a "reset" (non-verifying) link.
- Looked in the activity log for the verifications.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9284
Summary:
Ref T4398. This code hadn't been touched in a while and had a few crufty bits.
**One Time Resets**: Currently, password reset (and similar links) are valid for about 48 hours, but we always use one token to generate them (it's bound to the account). This isn't horrible, but it could be better, and it produces a lot of false positives on HackerOne.
Instead, use TemporaryTokens to make each link one-time only and good for no more than 24 hours.
**Coupling of Email Verification and One-Time Login**: Currently, one-time login links ("password reset links") are tightly bound to an email address, and using a link verifies that email address.
This is convenient for "Welcome" emails, so the user doesn't need to go through two rounds of checking email in order to login, then very their email, then actually get access to Phabricator.
However, for other types of these links (like those generated by `bin/auth recover`) there's no need to do any email verification.
Instead, make the email verification part optional, and use it on welcome links but not other types of links.
**Message Customization**: These links can come out of several workflows: welcome, password reset, username change, or `bin/auth recover`. Add a hint to the URI so the text on the page can be customized a bit to help users through the workflow.
**Reset Emails Going to Main Account Email**: Previously, we would send password reset email to the user's primary account email. However, since we verify email coming from reset links this isn't correct and could allow a user to verify an email without actually controlling it.
Since the user needs a real account in the first place this does not seem useful on its own, but might be a component in some other attack. The user might also no longer have access to their primary account, in which case this wouldn't be wrong, but would not be very useful.
Mitigate this in two ways:
- First, send to the actual email address the user entered, not the primary account email address.
- Second, don't let these links verify emails: they're just login links. This primarily makes it more difficult for an attacker to add someone else's email to their account, send them a reset link, get them to login and implicitly verify the email by not reading very carefully, and then figure out something interesting to do (there's currently no followup attack here, but allowing this does seem undesirable).
**Password Reset Without Old Password**: After a user logs in via email, we send them to the password settings panel (if passwords are enabled) with a code that lets them set a new password without knowing the old one.
Previously, this code was static and based on the email address. Instead, issue a one-time code.
**Jump Into Hisec**: Normally, when a user who has multi-factor auth on their account logs in, we prompt them for factors but don't put them in high security. You usually don't want to go do high-security stuff immediately after login, and it would be confusing and annoying if normal logins gave you a "YOU ARE IN HIGH SECURITY" alert bubble.
However, if we're taking you to the password reset screen, we //do// want to put the user in high security, since that screen requires high security. If we don't do this, the user gets two factor prompts in a row.
To accomplish this, we set a cookie when we know we're sending the user into a high security workflow. This cookie makes login finalization upgrade all the way from "partial" to "high security", instead of stopping halfway at "normal". This is safe because the user has just passed a factor check; the only reason we don't normally do this is to reduce annoyance.
**Some UI Cleanup**: Some of this was using really old UI. Modernize it a bit.
Test Plan:
- **One Time Resets**
- Used a reset link.
- Tried to reuse a reset link, got denied.
- Verified each link is different.
- **Coupling of Email Verification and One-Time Login**
- Verified that `bin/auth`, password reset, and username change links do not have an email verifying URI component.
- Tried to tack one on, got denied.
- Used the welcome email link to login + verify.
- Tried to mutate the URI to not verify, or verify something else: got denied.
- **Message Customization**
- Viewed messages on the different workflows. They seemed OK.
- **Reset Emails Going to Main Account Email**
- Sent password reset email to non-primary email.
- Received email at specified address.
- Verified it does not verify the address.
- **Password Reset Without Old Password**
- Reset password without knowledge of old one after email reset.
- Tried to do that without a key, got denied.
- Tried to reuse a key, got denied.
- **Jump Into Hisec**
- Logged in with MFA user, got factor'd, jumped directly into hisec.
- Logged in with non-MFA user, no factors, normal password reset.
- **Some UI Cleanup**
- Viewed new UI.
- **Misc**
- Created accounts, logged in with welcome link, got verified.
- Changed a username, used link to log back in.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D9252
Summary: This is useful when you're trying to onboard an entire office and you end up using the Google OAuth anyway.
Test Plan: tested locally. Maybe I should write some tests?
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9150
Summary: Did a more exhaustive grep on setIcon and found 99.9% of the icons.
Test Plan: I verified icon names on UIExamples, but unable to test some of the more complex flows visually. Mostly a read and replace.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9088
Summary: The removes the sprite sheet 'icons' and replaces it with FontAwesome fonts.
Test Plan:
- Grep for SPRITE_ICONS and replace
- Grep for sprite-icons and replace
- Grep for PhabricatorActionList and choose all new icons
- Grep for Crumbs and fix icons
- Test/Replace PHUIList Icon support
- Test/Replace ObjectList Icon support (foot, epoch, etc)
- Browse as many pages as I could get to
- Remove sprite-icons and move remarkup to own sheet
- Review this diff in Differential
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9052
Summary: Fixes T4728, first pass, Make real name optional on user accounts
Test Plan: Default real name config should be false (not required). Create new user, real name should not be required. Toggle config, real name should be required. Users with no real name should be always listed by their usernames.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4728
Differential Revision: https://secure.phabricator.com/D9027
Summary:
Ref T4398. This prompts users for multi-factor auth on login.
Roughly, this introduces the idea of "partial" sessions, which we haven't finished constructing yet. In practice, this means the session has made it through primary auth but not through multi-factor auth. Add a workflow for bringing a partial session up to a full one.
Test Plan:
- Used Conduit.
- Logged in as multi-factor user.
- Logged in as no-factor user.
- Tried to do non-login-things with a partial session.
- Reviewed account activity logs.
{F149295}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8922
Summary:
Ref T4398. This adds a settings panel for account activity so users can review activity on their own account. Some goals are:
- Make it easier for us to develop and support auth and credential information, see T4398. This is the primary driver.
- Make it easier for users to understand and review auth and credential information (see T4842 for an example -- this isn't there yet, but builds toward it).
- Improve user confidence in security by making logging more apparent and accessible.
Minor corresponding changes:
- Entering and exiting hisec mode is now logged.
- This, sessions, and OAuth authorizations have moved to a new "Sessions and Logs" area, since "Authentication" was getting huge.
Test Plan:
- Viewed new panel.
- Viewed old UI.
- Entered/exited hisec and got prompted.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8871
Summary:
Ref T4398. This is roughly a "sudo" mode, like GitHub has for accessing SSH keys, or Facebook has for managing credit cards. GitHub actually calls theirs "sudo" mode, but I think that's too technical for big parts of our audience. I've gone with "high security mode".
This doesn't actually get exposed in the UI yet (and we don't have any meaningful auth factors to prompt the user for) but the workflow works overall. I'll go through it in a comment, since I need to arrange some screenshots.
Test Plan: See guided walkthrough.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8851
Summary:
- Dialog pages currently have no titles or crumbs, and look shoddy. Add titles and crumbs.
- Dialog titles aren't always great for crumbs, add an optional "short title" for crumbs.
- `AphrontDialogResponse` is pure boilerplate. Allow controllers to just return a `DialogView` instead and get the same effect.
- Building dialogs requires a bit of boilerplate, and we generally construct them with no explicit `"action"`, which has some issues with T4593. Provide a convenience method to set the viewer and get a reasonable, explict submit URI.
Test Plan:
- Viewed dialog on its own.
- Viewed dialog as a dialog.
{F132353}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8577
Summary:
This is partly a good feature, and partly should reduce false positives on HackerOne reporting things vaguely related to this.
Allow a user to terminate login sessions from the settings panel.
Test Plan:
- Terminated a session.
- Terminated all sessions.
- Tried to terminate all sessions again.
- Logged in with two browsers, terminated the other browser's session, reloaded, got kicked out.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8556
Summary:
Fixes T3471. Specific issues:
- Add the ability to set a temporary cookie (expires when the browser closes).
- We overwrote 'phcid' on every page load. This creates some issues with browser extensions. Instead, only write it if isn't set. To counterbalance this, make it temporary.
- Make the 'next_uri' cookie temporary.
- Make the 'phreg' cookie temporary.
- Fix an issue where deleted cookies would persist after 302 (?) in some cases (this is/was 100% for me locally).
Test Plan:
- Closed my browser, reopned it, verified temporary cookies were gone.
- Logged in, authed, linked, logged out.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3471
Differential Revision: https://secure.phabricator.com/D8537
Summary:
See <https://github.com/facebook/phabricator/issues/541>.
- If a provider returns the email `""` or `"0"`, we currently don't let the user edit it and thus don't let them register.
- If a provider returns an invalid email like `"!!!"` (permitted by GitHub, e.g.), we show them a nonsense error message.
Instead:
- Pretend we didn't get an address if we get an invalid address.
- Test the address strictly against `null`.
Test Plan: Registered on Phabricator with my GitHub email set to `""` (empty string) and `"!!!"` (bang bang bang).
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: aran, epriestley
Differential Revision: https://secure.phabricator.com/D8528
Summary:
Ref T4593. There are a variety of clever attacks against OAuth which involve changing the redirect URI to some other URI on the same domain which exhibits unexpected behavior in response to an OAuth request. The best approach to dealing with this is for providers to lock to a specific path and refuse to redirect elsewhere, but not all providers do this.
We haven't had any specific issues related to this, but the anchor issue in T4593 was only a step away.
To mitigate this in general, we can reject the OAuth2 `'code'` parameter on //every// page by default, and then whitelist it on the tiny number of controllers which should be able to receive it.
This is very coarse, kind of overkill, and has some fallout (we can't use `'code'` as a normal parameter in the application), but I think it's relatively well-contained and seems reasonable. A better approach might be to whitelist parameters on every controller (i.e., have each controller specify the parameters it can receive), but that would be a ton of work and probably cause a lot of false positives for a long time.
Since we don't use `'code'` normally anywhere (as far as I can tell), the coarseness of this approach seems reasonable.
Test Plan:
- Logged in with OAuth.
- Hit any other page with `?code=...` in the URL, got an exception.
- Grepped for `'code'` and `"code"`, and examined each use to see if it was impacted.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: aran, epriestley
Maniphest Tasks: T4593
Differential Revision: https://secure.phabricator.com/D8499
Summary: Although the defaults don't require a verified email address, it's easy to lock yourself out by accident by configuring `auth.require-email-verification` or `auth.email-domains` before setting up email. Just force-verify the initial/setup account's address.
Test Plan: Went through setup on a fresh install, saw address verify.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8365
Summary: If an attacker somehow intercepts a verification URL for an email address, they can hypothetically CSRF the account owner into verifying it. What you'd do before (how do you get the link?) and after (why do you care that you tricked them into verifying) performing this attack is unclear, but in theory we should require a CSRF submission here; add one.
Test Plan: {F118691}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8351
Summary: If you copy the registration URL, then register, then load the URL again while logged out (i.e., attempt to reuse the registration URL), we try to show you a tailored error message. However, this call is not correct so we show you a not-so tailored exception instead.
Test Plan:
- Get to the registration screen.
- Save URL.
- Complete registration.
- Log out.
- Return to saved URL.
Previously, exception. Now, readable error.
{F117585}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8322
Summary:
OAuth1 doesn't have anything like the `state` parameter, and I overlooked that we need to shove one in there somewhere. Append it to the callback URI. This functions like `state` in OAuth2.
Without this, an attacker can trick a user into logging into Phabricator with an account the attacker controls.
Test Plan:
- Logged in with JIRA.
- Logged in with Twitter.
- Logged in with Facebook (an OAuth2 provider).
- Linked a Twitter account.
- Linked a Facebook account.
- Jiggered codes in URIs and verified that I got the exceptions I expected.
Reviewers: btrahan, arice
Reviewed By: arice
CC: arice, chad, aran
Differential Revision: https://secure.phabricator.com/D8318
Summary:
Via HackerOne. An attacker can bypass `auth.email-domains` by registering with an email like:
aaaaa...aaaaa@evil.com@company.com
We'll validate the full string, then insert it into the database where it will be truncated, removing the `@company.com` part. Then we'll send an email to `@evil.com`.
Instead, reject email addresses which won't fit in the table.
`STRICT_ALL_TABLES` stops this attack, I'm going to add a setup warning encouraging it.
Test Plan:
- Set `auth.email-domains` to `@company.com`.
- Registered with `aaa...aaa@evil.com@company.com`. Previously this worked, now it is rejected.
- Did a valid registration.
- Tried to add `aaa...aaaa@evil.com@company.com` as an email address. Previously this worked, now it is rejected.
- Did a valid email add.
- Added and executed unit tests.
Reviewers: btrahan, arice
Reviewed By: arice
CC: aran, chad
Differential Revision: https://secure.phabricator.com/D8308
Summary:
Ref T4443. Make hashing algorithms pluggable and extensible so we can deal with the attendant complexities more easily.
This moves "Iterated MD5" to a modular implementation, and adds a tiny bit of hack-glue so we don't need to migrate the DB in this patch. I'll migrate in the next patch, then add bcrypt.
Test Plan:
- Verified that the same stuff gets stored in the DB (i.e., no functional changes):
- Logged into an old password account.
- Changed password.
- Registered a new account.
- Changed password.
- Switched back to master.
- Logged in / out, changed password.
- Switched back, logged in.
- Ran unit tests (they aren't super extensive, but cover some of the basics).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, kofalt
Maniphest Tasks: T4443
Differential Revision: https://secure.phabricator.com/D8268
Summary:
Via HackerOne, there are two related low-severity issues with this workflow:
- We don't check if you're already logged in, so an attacker can trick a victim (whether they're logged in or not) into clicking a reset link for an account the attacker controls (maybe via an invisible iframe) and log the user in under a different account.
- We don't check CSRF tokens either, so after fixing the first thing, an attacker can still trick a //logged-out// victim in the same way.
It's not really clear that doing this opens up any significant attacks afterward, but both of these behaviors aren't good.
I'll probably land this for audit in a few hours if @btrahan doesn't have a chance to take a look at it since he's probably on a plane for most of the day, I'm pretty confident it doesn't break anything.
Test Plan:
- As a logged-in user, clicked another user's password reset link and was not logged in.
- As a logged-out user, clicked a password reset link and needed to submit a form to complete the workflow.
Reviewers: btrahan
CC: chad, btrahan, aran
Differential Revision: https://secure.phabricator.com/D8079
Summary:
Fixes T3793. There's a lot of history here, see D4012, T2102. Basically, the problem is that things used to work like this:
- User is logged out and accesses `/xyz/`. After they login, we'd like to send them back to `/xyz/`, so we set a `next_uri` cookie.
- User's browser has a bunch of extensions and now makes a ton of requests for stuff that doesn't exist, like `humans.txt` and `apple-touch-icon.png`. We can't distinguish between these requests and normal requests in a general way, so we write `next_uri` cookies, overwriting the user's intent (`/xyz/`).
To fix this, we made the 404 page not set `next_uri`, in D4012. So if the browser requests `humans.txt`, we 404 with no cookie, and the `/xyz/` cookie is preserved. However, this is bad because an attacker can determine if objects exist and applications are installed, by visiting, e.g., `/T123` and seeing if they get a 404 page (resource really does not exist) or a login page (resource exists). We'd rather not leak this information.
The comment in the body text describes this in more detail.
This diff sort of tries to do the right thing most of the time: we write the cookie only if we haven't written it in the last 2 minutes. Generally, this should mean that the original request to `/xyz/` writes it, all the `humans.txt` requests don't write it, and things work like users expect. This may occasionally do the wrong thing, but it should be very rare, and we stop leaking information about applications and objects.
Test Plan: Logged out, clicked around / logged in, used Charles to verify that cookies were set in the expected way.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3793
Differential Revision: https://secure.phabricator.com/D8047
Summary:
Ref T4339. Ref T4310. Currently, sessions look like `"afad85d675fda87a4fadd54"`, and are only issued for logged-in users. To support logged-out CSRF and (eventually) external user sessions, I made two small changes:
- First, sessions now have a "kind", which is indicated by a prefix, like `"A/ab987asdcas7dca"`. This mostly allows us to issue session queries more efficiently: we don't have to issue a query at all for anonymous sessions, and can join the correct table for user and external sessions and save a query. Generally, this gives us more debugging information and more opportunity to recover from issues in a user-friendly way, as with the "invalid session" error in this diff.
- Secondly, if you load a page and don't have a session, we give you an anonymous session. This is just a secret with no special significance.
This does not implement CSRF yet, but gives us a client secret we can use to implement it.
Test Plan:
- Logged in.
- Logged out.
- Browsed around.
- Logged in again.
- Went through link/register.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T4339
Differential Revision: https://secure.phabricator.com/D8043
Summary: Ref T4339. We have more magical cookie names than we should, move them all to a central location.
Test Plan: Registered, logged in, linked account, logged out. See inlines.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4339
Differential Revision: https://secure.phabricator.com/D8041
Summary:
Fixes T4143. This mitigates the "use a botnet to slowly try to login to every user account using the passwords '1234', 'password', 'asdfasdf', ..." attack, like the one that hit GitHub.
(I also donated some money to Openwall as a thanks for compiling this wordlist.)
Test Plan:
- Tried to register with a weak password; registered with a strong password.
- Tried to set VCS password to a weak password; set VCS password to a strong password.
- Tried to change password to a weak password; changed password to a strong password.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, chad
Maniphest Tasks: T4143
Differential Revision: https://secure.phabricator.com/D8048
Summary: Ref T4310. Ref T3720. We use bare strings to refer to session types in several places right now; use constants instead.
Test Plan: grep; logged out; logged in; ran Conduit commands.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T3720
Differential Revision: https://secure.phabricator.com/D7963
Summary: Ref T4310. Ref T3720. Session operations are currently part of PhabricatorUser. This is more tightly coupled than needbe, and makes it difficult to establish login sessions for non-users. Move all the session management code to a `SessionEngine`.
Test Plan:
- Viewed sessions.
- Regenerated Conduit certificate.
- Verified Conduit sessions were destroyed.
- Logged out.
- Logged in.
- Ran conduit commands.
- Viewed sessions again.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T3720
Differential Revision: https://secure.phabricator.com/D7962
Summary:
Ref T4310. This is a small step toward separating out the session code so we can establish sessions for `ExternalAccount` and not just `User`.
Also fix an issue with strict MySQL and un-admin / un-disable from web UI.
Test Plan: Logged in, logged out, admined/de-admin'd user, added email address, checked user log for all those events.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310
Differential Revision: https://secure.phabricator.com/D7953
Summary: This removes the bulk of the "Form Errors" text, some variations likely exists. These are a bit redundant and space consuming. I'd also like to back ErrorView more into PHUIObjectBox.
Test Plan: Test out the forms, see errors without the text.
Reviewers: epriestley, btrahan
CC: Korvin, epriestley, aran, hach-que
Differential Revision: https://secure.phabricator.com/D7924
Summary: We currently have a lot of calls to `addCrumb(id(new PhabricatorCrumbView())->...)` which can be expressed much more simply with a convenience method. Nearly all crumbs are only textual.
Test Plan:
- This was mostly automated, then I cleaned up a few unusual sites manually.
- Bunch of grep / randomly clicking around.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: hach-que, aran
Differential Revision: https://secure.phabricator.com/D7787
Summary:
Ref T4140. We could hit a redirect loop for a user with a verified primary email address but no "is verified" flag on their account. This shouldn't be possible since the migration should have set the flag, but we can deal with it more gracefully when it does happen (maybe because users forgot to run `storage/upgrade`, or because of ghosts).
In the controller, check the same flag we check before forcing the user to the controller.
When verifying, allow the verification if either the email or user flag isn't set.
Test Plan: Hit `/login/mustverify/`; verified an address.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4140
Differential Revision: https://secure.phabricator.com/D7621
Summary: Ref T4140. Allow unapproved users to verify their email addresses. Currently, unapproved blocks email verification, but should not.
Test Plan: Clicked email verification link as an unapproved user, got email verified.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T4140
Differential Revision: https://secure.phabricator.com/D7618
Summary:
Fixes T3741. The flag is respected in terms of actually creating the account, but the UI is a bit unclear.
This can never occur naturally, but installs can register an event which locks it.
Test Plan:
Artificially locked it, verified I got more reasonable UI;
{F81282}
Reviewers: btrahan, datr
Reviewed By: datr
CC: aran
Maniphest Tasks: T3741
Differential Revision: https://secure.phabricator.com/D7577
Summary:
- Add an option for the queue.
- By default, enable it.
- Dump new users into the queue.
- Send admins an email to approve them.
Test Plan:
- Registered new accounts with queue on and off.
- As an admin, approved accounts and disabled the queue from email.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7576
Summary:
Nothing fancy here, just:
- UI to show users needing approval.
- "Approve" and "Disable" actions.
- Send "Approved" email on approve.
- "Approve" edit + log operations.
- "Wait for Approval" state for users who need approval.
There's still no natural way for users to end up not-approved -- you have to write directly to the database.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7573
Summary:
Small step forward which improves existing stuff or lays groudwork for future stuff:
- Currently, to check for email verification, we have to single-query the email address on every page. Instead, denoramlize it into the user object.
- Migrate all the existing users.
- When the user verifies an email, mark them as `isEmailVerified` if the email is their primary email.
- Just make the checks look at the `isEmailVerified` field.
- Add a new check, `isUserActivated()`, to cover email-verified plus disabled. Currently, a non-verified-but-not-disabled user could theoretically use Conduit over SSH, if anyone deployed it. Tighten that up.
- Add an `isApproved` flag, which is always true for now. In a future diff, I want to add a default-on admin approval queue for new accounts, to prevent configuration mistakes. The way it will work is:
- When the queue is enabled, registering users are created with `isApproved = false`.
- Admins are sent an email, "[Phabricator] New User Approval (alincoln)", telling them that a new user is waiting for approval.
- They go to the web UI and approve the user.
- Manually-created accounts are auto-approved.
- The email will have instructions for disabling the queue.
I think this queue will be helpful for new installs and give them peace of mind, and when you go to disable it we have a better opportunity to warn you about exactly what that means.
Generally, I want to improve the default safety of registration, since if you just blindly coast through the path of least resistance right now your install ends up pretty open, and realistically few installs are on VPNs.
Test Plan:
- Ran migration, verified `isEmailVerified` populated correctly.
- Created a new user, checked DB for verified (not verified).
- Verified, checked DB (now verified).
- Used Conduit, People, Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7572
Summary:
Ref T3472. Currently, if an install only allows "@mycompany.com" emails and you try to register with an "@personal.com" account, we let you pick an "@mycompany.com" address instead. This is secure: you still have to verify the email. However, it defies user expectation -- it's somewhat confusing that we let you register. Instead, provide a hard roadblock.
(These accounts can still be linked, just not used for registration.)
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3472
Differential Revision: https://secure.phabricator.com/D7571
Summary: See private chatter. Make it explicitly clear when adding a provider that anyone who can browse to Phabricator can register.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7570
Summary: Adds an ObjectBox to Phabricator Registration
Test Plan: check logged out page for new header.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7223
Summary: I'd like to reuse this for other content areas, renaming for now. This might be weird to keep setForm, but I can fix that later if we need.
Test Plan: reload a few forms in maniphest, projects, differential
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7120
Summary: See task
Test Plan:
Attempt to signup with recaptcha disabled.
Attempt to signup with recaptcha enabled with incorrect value.
Attempt to signup with recaptcha enabled with correct value.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Maniphest Tasks: T3832
Differential Revision: https://secure.phabricator.com/D7053
