Summary:
Ref T988. This brings the class/interface atomizer over. A lot of parts of this are still varying degrees of very-rough, but most of the data ends up in approximatley the right place.
ALSO: PROGRESS BARS
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T988
Differential Revision: https://secure.phabricator.com/D6817
Summary:
This attempts some consistency in form layouts. Notably, they all now contain headers and are 16px off the sides and tops of pages. Also updated dialogs to the same look and feel. I think I got 98% of forms with this pass, but it's likely I missed some buried somewhere.
TODO: will take another pass as consolidating these colors and new gradients in another diff.
Test Plan: Played in my sandbox all week. Please play with it too and let me know how they feel.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D6806
Summary: Ref T3663. Does what it says on the tin.
Test Plan: Ran `storage upgrade`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3663
Differential Revision: https://secure.phabricator.com/D6778
Summary: Ref T3663. This is obsolete code which is used only in this migration, which Facebook has already performed and which isn't relevant for any other installs.
Test Plan: `grep`
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3663
Differential Revision: https://secure.phabricator.com/D6777
Summary:
Ref T1702. Ref T3718. There are a couple of things going on here:
**PhabricatorCustomFieldList**: I added `PhabricatorCustomFieldList`, which is just a convenience class for dealing with lists of fields. Often, current field code does something like this inline in a Controller:
foreach ($fields as $field) {
// do some junk
}
Often, that junk has some slightly subtle implications. Move all of it to `$list->doSomeJunk()` methods (like `appendFieldsToForm()`, `loadFieldsFromStorage()`) to reduce code duplication and prevent errors. This additionally moves an existing list-convenience method there, out of `PhabricatorPropertyListView`.
**PhabricatorUserConfiguredCustomFieldStorage**: Adds `PhabricatorUserConfiguredCustomFieldStorage` for storing custom field data (like "ICQ Handle", "Phone Number", "Desk", "Favorite Flower", etc).
**Configuration-Driven Custom Fields**: Previously, I was thinking about doing these with interfaces, but as I thought about it more I started to dislike that approach. Instead, I built proxies into `PhabricatorCustomField`. Basically, this means that fields (like a custom, configuration-driven "Favorite Flower" field) can just use some other Field to actually provide their implementation (like a "standard" field which knows how to render text areas). The previous approach would have involed subclasssing the "standard" field and implementing an interface, but that would mean that every application would have at least two "base" fields and generally just seemed bleh as I worked through it.
The cost of this approach is that we need a bunch of `proxy` junk in the base class, but that's a one-time cost and I think it simplifies all the implementations and makes them a lot less magical (e.g., all of the custom fields now extend the right base field classes).
**Fixed Some Bugs**: Some of this code hadn't really been run yet and had minor bugs.
Test Plan:
{F54240}
{F54241}
{F54242}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1702, T1703, T3718
Differential Revision: https://secure.phabricator.com/D6749
Summary: Ref T3656. Releeph denormalizes branch cut point identifiers into Branch objects, but this information isn't useful or used for sorting, filtering, or enforcing unique constraints. Instead, derive it via noramlized pathways from the `cutPointCommitPHID`.
Test Plan: Ran storage upgrade. Ran `releephwork.getbranch` and `releeph.getbranches`. Grepped for `cutPointCommitIdentifier`.
Reviewers: btrahan
Reviewed By: btrahan
CC: LegNeato, aran
Maniphest Tasks: T3656
Differential Revision: https://secure.phabricator.com/D6636
Summary:
Fixes T3660. Releeph Projects currently have an unused one-to-one mapping to Phabricator projects. This isn't consistent with other applications and has no integrations or uses. Get rid of it.
NOTE: Waiting for signoff from @legneato on T3660 before pulling the trigger here.
Test Plan: Created and edited Releeph projects. Grepped for references to project ID; there are a dozen or so but they're all either Releeph projects or Arcanist projects.
Reviewers: btrahan
Reviewed By: btrahan
CC: LegNeato, aran
Maniphest Tasks: T3660
Differential Revision: https://secure.phabricator.com/D6635
Summary: Ref T3655. Depends on D6633. This removes the writes and the column.
Test Plan: Created a project, edited a project. Verified the table doesn't have any keys including this column.
Reviewers: btrahan
Reviewed By: btrahan
CC: LegNeato, aran
Maniphest Tasks: T3655
Differential Revision: https://secure.phabricator.com/D6634
Summary: Ref T2769. I'm planning to keep this pretty simple, but we have this ad-hoc edit log for rules already and some other mess that we can clean up.
Test Plan: No effect yet; see future changes.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2769
Differential Revision: https://secure.phabricator.com/D6654
Summary: Email replies and subscribers seem to go hand in hand so deploy both at once.
Test Plan: played around with bin/mail. Verified replies posted comments on the paste.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3650
Differential Revision: https://secure.phabricator.com/D6682
This column has no default value and throws if you have maximum warnings activated:
EXCEPTION: (AphrontQueryException) #1364: Field 'commentVersion' doesn't have a default value...
Auditors: btrahan
Summary: Ref T3650. This adds a create transaction, transactions for metadata (title, langauge, view policy), and comments. Editor is used on all create /edit paths.
Test Plan: made some pastes via web and email - yay. edited pastes - yay. verified txns showed up on pastes and in feed correctly.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3516, T3650
Differential Revision: https://secure.phabricator.com/D6645
Summary: Ref T3578. I forget if this was an explicit decision or not, but we currently let the same user answer questions multiple times. I think this probably causes more confusion than it provides freedom. In conjunction with other UI issues (commenting being weird, notably), we're seeing some use of answers to comment, which is undesirable. Require each answer's author to be unique. Merge existing nonunique authors' answers.
Test Plan: {F52062}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3578
Differential Revision: https://secure.phabricator.com/D6605
Summary: Let's see how these do, seems ok
Test Plan: Microsoft Paint
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6615
Summary:
Fixes T3579
As a basic overview, this enables the author of a question to open/close a question.
Other bits;
- Add "Open" filter to the builtin queries
- Add "Status" to search form
- Refactor ponder constants
- Add coloured bars for different question statuses
Test Plan:
- Open/Close questions
- Search for some bits
- Use filters
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3579
Differential Revision: https://secure.phabricator.com/D6590
Conflicts:
src/infrastructure/storage/patch/PhabricatorBuiltinPatchList.php
Summary: Like other icons, except white (hover states).
Test Plan: photoshop
Reviewers: epriestley, btrahan
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6591
Summary:
Now you can actually replace an image! Ref T3572. This ended up needing a wee bit of infrastructure to work...
- add replace image transaction to pholio
- add replacesImagePHID to PholioImage
- tweaks to editor to properly update images with respect to replacement
- add edges to track replacement
- expose getNodes on graph query infrastructure to query the entire graph of who replaced who
- move pholio image to new phid infrastructure
Still TODO - the history view should get chopped out a bit from the current view - no more inline comments / generally less functionality plus maybe a tweak or two to make this more sensical.
Test Plan: replaced images and played with history controller a little. works okay.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3572
Differential Revision: https://secure.phabricator.com/D6560
Summary: Fixes T3557. One thing which made T3557 kind of a mess was the lack of information about progress through temporary failures. Add a column which records a task's last failure time, and surface it in the console.
Test Plan: {F51277}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3557
Differential Revision: https://secure.phabricator.com/D6550
Summary: Ref T2715. Switch Maniphest to the new stuff.
Test Plan: Used `phid.query`; `phid.lookup` to load objects.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2715
Differential Revision: https://secure.phabricator.com/D6516
Summary:
See discussion in T2715. Currently, PHIDs are all hard coded in the PHID application. In the long run, we need to move them out into actual applications.
A specific immediate issue is Releeph, which uses a very very old and very broken mechanism to inject PHIDs in a way that only sort of works.
Moving forward, every PHID type will be provided by a `PhabricatorPHIDType` subclass, which will manage loading it, etc.
This also moves toward cleaning up the "load objects by name" (where "name" means something like `D12`) code, which is an //enormous// mess and spread across at least 4-5 callsites.
Test Plan: Used `phid.lookup` and `phid.query` to load Slowvotes.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6502
Summary: Fixes T3592, hand kerned the logo and dropped it's size 2 px.
Test Plan: pixels in photoshop, dry run in sandbox
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3592
Differential Revision: https://secure.phabricator.com/D6505
Summary:
Fixes T2675, T2676.
- when the last person leaves a project it is archived.
- a script to archive all memberless projects
- better feed stories for the various policy edits you can do
- phriction pages are also moved as you rename projects
Test Plan: edited some projects and noted reasonable feed stories. ran script against test data and it worked! left a last man standing project and it archived. renamed a project to "a" then "b" then "a" (etc) and it worked including phrictiondocument moves
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2676, T2675
Differential Revision: https://secure.phabricator.com/D6478
Summary: Updates to the gradient logo and hashed background. Minor pixel tweaks.
Test Plan: Test desktop and mobile. Check photoshop for alignment.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6487
Summary: Status icons for next to people names
Test Plan: photoshop
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2064
Differential Revision: https://secure.phabricator.com/D6479
Summary:
Nice title. We add three new transactions - IMAGE_FILE, IMAGE_NAME, and IMAGE_DESCRIPTION. The first is a bit like subscribers as it is a list of file phids. The latter have values of the form ($file_phid => $data), where $data is $name or $description respectively. This is because we need to collate transactions based on $file_phid...
Overall, this uses the _underyling files_ and not the "PholioImage" to determine if things are unique or not. That said, simply mark PholioImages as obsolete so inline comments about no-longer applicable PholioImages don't break.
Does a reasonable job implementing the mock. Note you can't "update" an image at this time, though you can delete and add at will.
Test Plan: played with pholio a ton.
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, aran, Korvin
Maniphest Tasks: T3489
Differential Revision: https://secure.phabricator.com/D6441
Summary: Subscribing doesn't do anything yet, but you can subscribe!
Test Plan: {F50169}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6456
Summary:
Move comments from the old table to ApplicationTransactions. Patch dances around which objects it uses since I intend to delete the comment table.
NOTE: This temporarily disables comment writes. I'll restore them shortly.
Test Plan: {F50166}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6454
Summary: Schema changes to modernize this app.
Test Plan: Ran schema changes, created a new slowvote. No real effects yet.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6453
Summary: Fixes T3069. Ref T3516. For a long time, LDAP import added trailing whitespace to real names when importing them (for example, `"John Smith"` would be imported as `"John Smith "`). We no longer do this, but should clean up the database since it seems highly unlikely that any user wants trailing whitespace in their real name.
Test Plan:
$ ./bin/storage upgrade -f --apply phabricator:20130711.trimrealnames.php
Applying patch 'phabricator:20130711.trimrealnames.php'...
Trimming trailing whitespace from user real names...
Trimming user 1 from 'Evan Priestley ' to 'Evan Priestley'.
User 4 is already trim.
User 5 is already trim.
User 6 is already trim.
User 7 is already trim.
User 8 is already trim.
User 9 is already trim.
User 10 is already trim.
User 11 is already trim.
User 12 is already trim.
User 13 is already trim.
User 14 is already trim.
User 15 is already trim.
User 21 is already trim.
User 22 is already trim.
User 26 is already trim.
User 28 is already trim.
User 29 is already trim.
User 32 is already trim.
User 33 is already trim.
User 35 is already trim.
User 39 is already trim.
User 51 is already trim.
User 53 is already trim.
User 54 is already trim.
User 55 is already trim.
Done.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3069, T3516
Differential Revision: https://secure.phabricator.com/D6426
Summary: Fixes T3481. Sort of - this thing be very ugly. Also it assumes that you'll "always" want to sign terms. I was thinking in a future diff that should be optional as well as configurable, though it was unclear to me if either was worth pursuing... Generally very hideous as the three main elements (PHUIDocument, AphrontErrorView, and AphrontForm with an AphrontFormInset) have never really played together before.
Test Plan: agreed to some test terms. noted UI displayed nicely. reloaded and noted UI told me I had signed it already. Went to different terms and filled them out wrong and got sensical errors.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3481
Differential Revision: https://secure.phabricator.com/D6399
Summary: this let's the list controller save a query. Fixes T3488. Note didn't bother denormalizing document body at all since I don't think we want to show a snippet.
Test Plan: viewed a list of legalpad documents - yay. viewed a legalpad document - yay. created a legalpad document - yay. edited a legalpad document - yay. edited with N authors - yay.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3488
Differential Revision: https://secure.phabricator.com/D6382
Summary:
Supports !unsubscribe and commenting on replies. Subscribers get mailed something reasonable. Fixes T3480.
Sneaks in /LX/ support. In the near future I want to have that /LX/ be a clean "signature" page sans all the edit actions and other fluff... Will resolve this as part of T3481.
Test Plan: used the metamta console to add comments and unsubscribe. added a phlog() inside mail code to verify mail bodies looked okay.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3480
Differential Revision: https://secure.phabricator.com/D6369
Summary:
- Add GC support to conduit logs.
- Add Query support to conduit logs.
- Record the actual user PHID.
- Show client name.
- Support querying by specific method, so I can link to this from a setup issue.
@wez, this migration may not be fast. It took about 8 seconds for me to migrate 800,000 rows in the `conduit_methodcalllog` table. This adds a GC which should keep the table at a more manageable size in the future.
You can safely delete all data older than 30 days from this table, although you should do it by `id` instead of `dateCreated` since there's no key on `dateCreated` until this patch.
Test Plan:
- Ran GC.
- Looked at log UI.
- Ran Conduit methods.
Reviewers: btrahan
Reviewed By: btrahan
CC: wez, aran
Differential Revision: https://secure.phabricator.com/D6332
Summary:
Ref T3116. This is a large amount of schema for V0 but it seems relatively complete to the desired features in T3116.
The only thing of note that is missing is documentSignatures should have some sort of "signedStatus". "Un-signing" seemed weird to me, though I could imagination "pending signature". "Pending signature" could be done via edges pretty easily.
Plan is to have "Document" be at the top level and own policy. "DocumentBody" will store a version of title and text for each and every "edit" on a larger Document. "Edges" are to be used to tie Authors => Document for V0ish. Transactions are going to be used to store all the various edits possible here. Oh and DocumentSignatures will do what you expect, but include documentVersion as part of the key.
Test Plan: just some schema. `storage update` worked though!
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, aran, Korvin
Maniphest Tasks: T3116
Differential Revision: https://secure.phabricator.com/D6323
Summary:
Ref T2852. This table holds data about external objects and allows us to write edges to them.
Objects are identified with an `<applicationType, applicationDomain, objectType, objectID>` tuple. For example, Asana tasks will be, e.g., `<asana, asana.com, asana:task, 93829279873>` or similar.
Test Plan: Ran storage upgrade.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2852
Differential Revision: https://secure.phabricator.com/D6271
Summary:
Ref T2222. My path forward here wasn't very good -- I was thinking I could set `transactionPHID` for the inline comments as I migrated, but it must be unique and an individual DifferentialComment may have more than one inline comment. Dropping the unique requirement just creates more issues for us, not fewer.
So the migration in D6266 isn't actually useful. Undo it -- this can't be a straight revert because some installs may already have upgraded.
Test Plan: Ran new migrations, verified the world ended up back in the same place as before (made comments, viewed reivsions).
Reviewers: btrahan
Reviewed By: btrahan
CC: wez, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D6269
Summary:
Ref T2222. This adds PHIDs to all Differential comments so I can migrate the inlinecommment table to transaction_comment in the next diff.
@wez, this will issue a few million queries for Facebook (roughly, one for each Differential comment ever made). It's safe to skip the `.php` half of the patch, bring Phabricator up normally, and then apply this patch with Phabricator running if that eases the migration, although the next few diffs will probably be downtime-required migrations so maybe it's easier to just schedule some downtime.
Test Plan: Ran migration locally. Verified existing comments and new comments received PHIDs.
Reviewers: btrahan
Reviewed By: btrahan
CC: wez, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D6266
Summary:
Ref T2222. Ref T1460. Depends on D6260.
This creates the new tables, but doesn't start using them. I added three new fields for {T1460}, to represent fixed/done/replied states.
Test Plan: Ran storage upgrade.
Reviewers: btrahan
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T1460, T2222
Differential Revision: https://secure.phabricator.com/D6261
Summary: Ref T1536. This is the last major migration. Moves us over to the DB and drops all the config stuff.
Test Plan:
- Ran the migration.
- Saw all my old config brought forward and respected, with accurate settings.
- Ran LDAP import.
- Grepped for all removed config options.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran, wez
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6243
Summary: Remade auth and policy icon.
Test Plan: look at the images.
Reviewers: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6241
Summary: Moves old auth icon to 'policy' and new icon is keys.
Test Plan: photoshop
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6236
Summary: Ref T1536. This gets the single queries out of the View and builds a propery Query class for ExternalAccount.
Test Plan: Linked/unlinked accounts, logged out, logged in.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6212
Summary:
Ref T1536. Currently, we have about 40 auth-related configuration options. This is already roughly 20% of our config, and we want to add more providers. Additionally, we want to turn some of these auth options into multi-auth options (e.g., allow multiple Phabricator OAuth installs, or, theoretically multiple LDAP servers).
I'm going to move this into a separate "Auth" tool with a minimal CLI (`bin/auth`) interface and a more full web interface. Roughly:
- Administrators will use the app to manage authentication providers.
- The `bin/auth` CLI will provide a safety hatch if you lock yourself out by disabling all usable providers somehow.
- We'll migrate existing configuration into the app and remove it.
General goals:
- Make it much easier to configure authentication by providing an interface for it.
- Make it easier to configure everything else by reducing the total number of available options.
Test Plan: Ran storage upgrade.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6196
Summary: Ref T1536. This is similar to D6172 but much simpler: we don't need to retain external interfaces here and can do a straight migration.
Test Plan: TBA
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6173
Summary: Ref T1536. Migrates the OAuthInfo table to ExternalAccount, and makes `PhabricatorUserOAuthInfo` a wrapper for an ExternalAccount.
Test Plan: Logged in with OAuth, registered with OAuth, linked/unlinked OAuth accounts, checked OAuth status screen, deleted an account with related OAuth.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6172
Summary:
Ref T1536. This is the schema code for `PhabricatorExternalAccount` which was previously in D4647. I'm splitting it out so I can put it earlier in the sequence and because it's simple and standalone.
Expands `PhabricatorExternalAccount` to have everything we need for the rest of registration.
Test Plan: Implemented the remainder of new registration on top of this.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6169
Summary: Decided to just remove the hover grey to white, seems fine with the new white icons.
Test Plan: use homepage + icons
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6181
Summary: The shadow on the white icons was too harsh for their size, looked bad on timelines.
Test Plan: Check timeline example, phuilist example.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6176
Summary: Took a stab at some login icons for buttons.
Test Plan: photoshop
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6174
Summary:
Adds a profile edit controller (with just one field and on links to it) that uses ApplicationTransactions and CustomField.
{F45617}
My plan is to move the other profile fields to this interface and get rid of Settings -> Profile. Basically, these will be "settings":
- Sex
- Language
- Timezone
These will be "profile":
- Real Name
- Title
- Blurb
- Profile Image (but I'm going to put this on a separate UI)
- Other custom fields
Test Plan: Edited my realname using the new interface.
Reviewers: chad, seporaitis
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D6152
Summary: Used more logical icons for subscribe, auto, and delete instead of the mail icons. Fixes T3329
Test Plan: Tested subscribing and unsubscribing in Maniphest.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3329
Differential Revision: https://secure.phabricator.com/D6151
Summary: Tweaks the dark, grey, and white icons to match the action-icons. Also added a home icon for navigation.
Test Plan: looked at list navs, action menus.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6142
Summary: Needed to be more restrictive
Test Plan: Test maniphest and list examples.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6139
Summary: This adds examples and abstracts out CSS for common nav re-use.
Test Plan: Tested DocumentExample and ListExample
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6138
Summary:
This diff covers a bit of ground.
- PHUIDocumentExample has been added
- PHUIDocument has been extended with new features
- PhabricatorMenuView is now PHUIListView
- PhabricatorMenuItemView is now PHUIItemListView
Overall - I think I've gotten all the edges covered here. There is some derpi-ness that we can talk about, comments in the code. Responsive design is missing from the new features on PHUIDocument, will follow up later.
Test Plan: Tested mobile and desktop menus, old phriction layout, new document views, new lists, and object lists.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6130
Summary:
Applications come with builtin queries, but users might want to get rid of them. Allow users to disable named queries if they prefer.
This has one funky behavior, which is that the first time you disable a named query it goes to the top of your list. That will be fixed in the next diff, which will make them reorderable.
Test Plan: Added/edited/removed named queries, disabled/enabled builtin named queries.
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D6128
Summary: Ref T988. Mostly backend changes, with a very rough frontend on top of them. See Conpherence discussion.
Test Plan: {F45010}
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T988
Differential Revision: https://secure.phabricator.com/D6113
Summary: Ref T2625. Ref T1163. A couple of small generalization nudges, but this is almost entirely straightforward.
Test Plan: Executed various File queries.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1163, T2625
Differential Revision: https://secure.phabricator.com/D6091
Summary:
Ref T2625. Ref T3273. This is mostly a UI foil for T3273. Right now, to find tasks without owners or without projects you search for the magic strings "upforgrabs" and "noproject". Unsurprisingly, no users have ever figured this out. I want to get rid of it. Instead, these interfaces will look like:
Assigned: [ Type a user name... ]
[ X ] Find unassigned tasks.
Projects: [ Type a project name... ]
[ X ] Find tasks with no projects.
Seems reasonable, I think?
Test Plan: Searched for "rainbow, js", "rainbow + no language", "no language", date ranges, etc.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T2625, T3273
Differential Revision: https://secure.phabricator.com/D6085
Summary:
Ref T1163. Ref T2625. This could probably use some tweaks, but I kept things mostly-generic.
I added a new control for freeform dates so we can have it render help or whatever later on.
Test Plan: See screenshots.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2625, T1163
Differential Revision: https://secure.phabricator.com/D6084
Summary:
This prevents security by obscurity.
If I have read-only access to the database then I can pretend to be any logged-in user.
I've used `PhabricatorHash::digest()` (even though we don't need salt as the hashed string is random) to be compatible with user log.
Test Plan:
Applied patch.
Verified I'm still logged in.
Logged out.
Logged in.
$ arc tasks
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6080
Summary:
Currently, the author of an image macro is read from the attached file. This is messy and necessitates a join, and is not always correct. Instead, store the data when the macro is created.
This lays the groundwork for generalizing ApplicationSearch here. Ref T2625.
Test Plan: Migrated existing macros, created a new macro, checked web UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2625
Differential Revision: https://secure.phabricator.com/D6071
Summary:
Ref T2231, T603. Plan of attack here is pretty much:
- Built out a new (currently not linked in the UI) edit interface in Diffusion which is transaction-based and has a sensible layout.
- Build out a new create interface based on PagedForm which dumps into the new edit interface.
- Throw the old stuff away.
- Everyone lives happily ever after.
Test Plan:
{F44163}
{F44164}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D6029
Summary: If we're unassigning an owner from a task it should set the column to `NULL` rather than an empty string. Fixes T3239
Test Plan: Assigned and Unassigned a task. Make sure the db is doing as excpected. Ran the patch, checked the db.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3239
Differential Revision: https://secure.phabricator.com/D6017
Summary:
removes the whole custom image thing, instead using a more standard application crumbs. Gives this glorious space back to the compose area which is now tens of pixels taller. Also defaults it to the people widget. Basically, fixes T3160.
For now, you **CAN NOT** edit the title of a conpherence. I didn't want to jam in too much here. Next diff will be to change the widget icons into the dropdown switcher, which will also bring back the editing of titles.
Test Plan: looked at conpherence and it was pretty. Resized it vigorously and it wasn't too bad.
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, aran, Korvin
Maniphest Tasks: T3160
Differential Revision: https://secure.phabricator.com/D5998
Summary:
Ref T988. This adds basics for the non-static publishing target:
- Storage (called "Live", e.g. `DivinerLiveAtom` to distinguish it from shared classes like `DivinerAtom`).
- Mostly populate the storage.
- Some minor fixes and improvements.
Test Plan: Generated docs, looked at DB, saw mostly-sensible output.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T988
Differential Revision: https://secure.phabricator.com/D5973
Summary: Basically a one line change, plus a regen. This should be the last full-rewrite these things get since they'll stop fully rehashing all the time now.
Test Plan: See D5964.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D5965
Summary: Debating removing the textures from the sidenavs, sending this around for comments.
Test Plan: Test homepage and various sidenavs, mobile layouts.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5948
Summary:
We/I broke a couple of things here recently (see D5911) and are doing some work here in general (see D5912, etc.).
Generally, this code is pretty oldschool and not especially well architected for modern application-oriented Phabricator. It hardcodes a lot of stuff which should be applications' responsibilites.
Take the first steps toward making it more solid to reduce the risk here. In particular:
- Factor out the "self mail" and "duplicate mail" checks and add unit tests.
- Make Message-ID hash handling automatic.
Test Plan: Ran unit tests.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D5915
Summary:
Migrate to `PhabricatorApplicationTransactions` (`ReleephRequestTransactions` applied by `ReleephRequestTransactionalEditor`, instead of `ReleephRequestEvents` created by `ReleephRequestEditor`) and migrate all the old events into transactions. Email is supported in the standard way (no more `ReleephRequestMail`) as well.
This also collapses the Releeph request create and edit controllers into one class, as well as breaking everyone's subject-based mail rules by standardising them (but which should be more easily filtered by looking at headers.)
Test Plan:
* Make requests, then pick them.
* Pick and revert the same request so that discovery happens way after `arc` has told Releeph about what's been happening.
* Try to pick something that fails to pick in a project with pick instructions (and see the instructions are in the email.)
* Load all of FB's Releeph data into my DB and run the `storage upgrade` script.
* Request a commit via the "action" in a Differential revision.
Reviewers: epriestley
Reviewed By: epriestley
CC: epriestley, aran, Korvin, wez
Maniphest Tasks: T3092, T2720
Differential Revision: https://secure.phabricator.com/D5868
Summary: Can name saved queries.
Test Plan: Try naming some saved queries using the form.
Reviewers: epriestley
CC: aran, Korvin, AnhNhan
Maniphest Tasks: T2625
Differential Revision: https://secure.phabricator.com/D5878
Conflicts:
src/infrastructure/storage/patch/PhabricatorBuiltinPatchList.php
Summary:
We have a few interfaces where add "Edit", "Delete" or some other action to a list. Currently, this happens via icons, but these are cumbersome and weird, are inconsistent, can't be workflow'd, are hard to hit on desktops and virtually impossible to hit on mobile, and generally just feel iffy to me. Prominent examples are Projects and Flags. I'd like to try adding an "edit" action to Maniphest (to provide quick edit from list views, basically). It looks like some of Releeph would benefit here, as well.
Instead, provide first-class actions:
{F42978}
They produce targets which my meaty ham-fists can plausibly hit on mobile, too:
{F42979}
(We could do some kind of swipe-to-expose thing eventually, but I think putting them by default is OK?)
Test Plan: Added UIExamples. Checked desktop/mobile.
Reviewers: chad, btrahan, edward
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D5890
Summary:
Fixes T3132. Currently, if a user deletes a file which is present in a mock, that mock throws an exception when loading. If the file is also the cover photo, the mock list throws an exception as well.
In other applications, we can sometimes deal with this (a sub-object vanishing) by implicitly hiding the parent object (for example, we can just vanish feed stories about objects which no longer exist). We can also sometimes deal with it by preventing sub-objects from being directly deleted.
However, neither approach is reasonable in this case.
If we vanish the whole mock, we'll lose all the comments and it will generally be weird. Vanishing a mock is a big deal compared to vanishing a feed story. We'll also need to load more data on the list view to prevent showing a mock on the list view and then realizing we need to vanish it on the detail view (because all of its images have been deleted).
We permit total deletion of files to allow users to recover from accidentally uploading sensitive files (which has happened a few times), and I'm hesitant to remove this capability because I think it serves a real need, so we can't prevent sub-objects from being deleted.
So we're left in a relatively unique situation. To solve this, I've added a "builtin" mechanism, which allows us to expose some resource we ship with as a PhabricatorFile. Then we just swap it out in place of the original file and proceed forward normally, as though nothing happened. The user sees a placeholder image instead of the original, but everything else works reasonably and this seems like a fairly acceptable outcome.
I believe we can use this mechanism to simplify some other code too, like default profile pictures.
Test Plan: Deleted a Pholio mock cover image's file. Implemented change, saw functional Pholio again with beautiful life-affirming "?" art replacing soul-shattering exception.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T3132
Differential Revision: https://secure.phabricator.com/D5870
Summary: Adding mail-keys; required for `PhabricatorApplicationTransaction` support.
Test Plan: Upgrade an old database with this patch, observe the matrix: {F42620}
Reviewers: wez, epriestley
Reviewed By: epriestley
CC: epriestley, aran
Maniphest Tasks: T2720
Differential Revision: https://secure.phabricator.com/D5852
Summary:
Removing a bunch of cache-style columns from `ReleephRequest`, where it's actually much easier to just load the information at runtime.
This makes sense for migrating to `PhabricatorApplicationTransactions`, where each xaction changes one aspect of a `ReleephRequest` at a time (rather than multiple columns at once.)
Test Plan: Request something, run `arc releeph` and watch the picks, pass on some RQs, run `arc releeph` and watch the reverts.
Reviewers: wez, epriestley
Reviewed By: epriestley
CC: epriestley, aran
Maniphest Tasks: T2720
Differential Revision: https://secure.phabricator.com/D5851
Summary:
countdown_timer table named to countdown.
datepoint and related stuff renamed to epoch.
Countdowns now have phids.
Various UI items changed from timer to countdown.
Test Plan: Did run storage upgrade and added some countdowns.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, AnhNhan
Maniphest Tasks: T2624
Differential Revision: https://secure.phabricator.com/D5812
Summary: Enable saved query objects to actually be saved to the database.
Test Plan: Insert a call to save() and check that the query is written correctly.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, AnhNhan
Maniphest Tasks: T2625
Differential Revision: https://secure.phabricator.com/D5775
Conflicts:
src/infrastructure/storage/patch/PhabricatorBuiltinPatchList.php
Summary: this is D5750 but just the conpherence part. fixes a few random conpherence bugs / quirks as well. Also messes with ApplicationTransactionEditor to expose the xactions so Conpherence doesn't over-update participation rows. Fixes T2429.
Test Plan: set LIMIT to 3. verified I could scroll down all conpherences. next, picked a conpherence "in the middle" to load. verified I could page up and down. next, picked a conpherence in the middle then had another user update that conpherence. verified as I paged up the conpherence re-loaded properly selected
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, aran, Korvin, vrana
Maniphest Tasks: T2429
Differential Revision: https://secure.phabricator.com/D5783
Summary:
This has no real behavioral changes (except better error handling), it just factors things out to be a bit cleaner. In particular:
- Move more shared form behaviors into the common JS form component.
- Move more error handling into shared pathways.
- Make the specialized Stripe / Balanced methods do less work.
This needs some more polish for nontrival errors (especially on the Balanced side) but none of the error behavior is worse than it was and a lot of it is much better.
Ref T2787.
Test Plan: Hit all invalid form errors, added valid payment methods with Stripe and Balacned.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D5771
Summary: Sql Patch to rename the externalaccount table to user_externalaccount and to add dateCreated, dateModified fields to the updated table.
Test Plan: {F41442}
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, AnhNhan
Differential Revision: https://secure.phabricator.com/D5770
Summary: Will use these in feed, other places.
Test Plan: Photoshop, uiexamples.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5746
Summary:
Ref T2599.
Implements an "order" mode which fullscreens the editor and reduces distractions, similar to Asana's "focus" mode and GitHub's "zen" mode. This can help users who need fewer distractions get work done.
Implements a "chaos" mode which does the opposite. This can help users who need more distractions to get work done.
Test Plan: Clicked "order" and "chaos" buttons.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2599
Differential Revision: https://secure.phabricator.com/D5735
Summary: Adds a base class for displaying images and icons.
Test Plan: Tested giving and taking tokens, viewed action headers, uiexamples for icons, workboards.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5736
Summary: Created PhabricatorExternalAccount class with only data members. Will discuss with you regarding the necessary functions to be implemented in this class. Sql Patch to create a new table for external_accounts. Will I have to write unit tests the new storage object? Sending you this diff so that you can comment on this to further improve :).
Test Plan: {F40977}
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, AnhNhan
Maniphest Tasks: T1536, T1205
Differential Revision: https://secure.phabricator.com/D5724
Summary: Refreshes feed's design a bit, adds app icons, works nicer on mobile.
Test Plan: Tested many feed stories, not sure I got them all, but seems fine.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5673
Summary: Migration doesn't delete differential.revisionPHID but maybe it should?
Test Plan: Reparsed commit, ran the migration, deleted differential.revisionPHID, looked at task with attached commit with attached revision.
Reviewers: epriestley, edward
Reviewed By: epriestley
CC: aran, Korvin, AnhNhan
Differential Revision: https://secure.phabricator.com/D5634
Summary: Icons for close or delete in action headers
Test Plan: photoshop, diffcamp
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5643
Summary: We're baking some useful things into ActionHeader, would like to consolidate it's use around the site for consistency.
Test Plan: Tested log out dialog, attach dependencies, delete document in phriction.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin, AnhNhan
Differential Revision: https://secure.phabricator.com/D5635
Summary: First pass here, still needs some UI work (maybe? tablets?). Getting it out to see if implementation is corrrect.
Test Plan: Shrink Maniphest task on Chrome, see new UI. Toggle menu. Test on iOS.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5631
Summary: Creates CSS Gradients for buttons. Also tweaked hover and active styles. "Fixed" disabled state (this may require follow up diffs to correct around site)
Test Plan: Tested Maniphest and UI Examples in Chrome and IE10/9/8
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5624
Summary: Initial pass at an action header. The idea is to support current and future planned needs in 'headers' with various colors and icons. The overall goal here is to keep markup light and allow other classes to wrap and extend with more specific features.
Test Plan: Tested UIExamples and Workboards.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin, AnhNhan
Differential Revision: https://secure.phabricator.com/D5585
Summary: this just does the back-end migration. I realized that we don't need to keep track of cacheTitle and cachePhoto since those are based off recent participation handles and dynamic relative to who is viewing it. Also kept the "last seen phid" as I think that will be useful to have auto-scroll to where you last read. Ref T2867.
Test Plan: did the migration. observed sensical values in the database. created a new conpherence - again sensical values. updated a conpherence - more sensical values.
Reviewers: epriestley, chad
Reviewed By: epriestley
CC: aran, Korvin, AnhNhan
Maniphest Tasks: T2867
Differential Revision: https://secure.phabricator.com/D5567
Summary: First pass at 'action icons' for headers and other items. Ties into future diff.
Test Plan: photoshop, read the css.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin, AnhNhan
Differential Revision: https://secure.phabricator.com/D5565
Summary: Removes the glow icons and uses a hover change. Fixes phantom anchors.
Test Plan: Review in Chrome at various sizes (phone tablet). Check that icons still work. Check that mobile menus render when clicked.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2876
Differential Revision: https://secure.phabricator.com/D5549
Summary: Add pagination to leader board. Add key on token count in db.
Test Plan: Set page size to 1 and give tokens to two tasks.
Reviewers: epriestley, AnhNhan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5513
Summary:
Added the initial storage structure (DB tables and DAO classes)
for Phrequent.
Test Plan:
Apply the patch and run `bin/storage upgrade`. It should
complete successfully.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2857
Differential Revision: https://secure.phabricator.com/D5476
Summary:
Ref T2787. A product is the abstract representation of something you can buy or rent/subscribe to. Although the interface isn't locked down yet, this would ultimately be internal/administrative.
Products likely have some user-facing skin on top of them: plans would have a purchasing/comparison flow, physical goods would have a storefront, etc., so products don't have any information like descriptions or images, just the data that Phortune needs to correctly bill accounts.
Generally, this is very basic for the moment.
Test Plan:
{F37594}
{F37595}
{F37596}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D5441
Summary:
Hook @btrahan's Stripe form to the rest of Phortune.
- Users can add payment methods.
- They are saved to Stripe and associated with PhortunePaymentMethods on our side.
- Payment methods appear on account overview.
Test Plan:
{F37548}
{F37549}
{F37550}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D5438
Summary:
Ref T2787. This does very little so far, but makes inroads on accounts and billing. This is mostly just modeled on what Stripe looks like. The objects are:
- **Account**: Has one or more authorized users, who can make manage the account. An example might be "Phacility", and the three of us would be able to manage it. A user may be associated with more than one account (e.g., a corporate account and a personal account) but the UI tries to simplify the common case of a single account.
- **Payment Method**: Something we can get sweet sweet money from; for now, a credit card registered with Stripe. Payment methods are associated with an account.
- **Product**: A good (one time charge) or service (recurring charge). This might be "t-shirt" or "enterprise plan" or "hourly support" or whatever else.
- **Purchase**: Represents a user purchasing a Product for an Account, using a Payment Method. e.g., you bought a shirt, or started a plan, or purchased support.
- **Charge**: Actual charges against payment methods. A Purchase can create more than one charge if it's a plan, or if the first charge fails and we re-bill.
This doesn't fully account for stuff like coupons/discounts yet but they should fit into the model without any issues.
This only implements `Account`, and that only partially.
Test Plan: {F37531}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D5435
Summary: Introduces a new settings panel for Conpherence specific settings.
Test Plan:
started a thread with a test user, thus two participants total. Replied to conpherence, toggling notification settings in between. Verified 1 or 2 emails were sent as appropos to the current toggle.
Toggled global setting and verified setting was updated in conpherences where nothing was specified. Verified setting conpherence setting overrides global setting.
Reviewers: epriestley, chad
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2521
Differential Revision: https://secure.phabricator.com/D5391
Summary: Mostly finished, wanted to get it into your hands to play with. I need to remove some more dead CSS and figure out where we want to put profile/logout, but overall feels pretty good. Tested a bunch in iOS and other layouts.
Test Plan: Test Home, Maniphest, search bars, app menus.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin, AnhNhan
Maniphest Tasks: T2809
Differential Revision: https://secure.phabricator.com/D5407
Summary:
Fixes T2694
added edge infrastructure for Phriction
added mail subject prefix option for Phriction
added messy mail support for subscribers
adds edges to the phriction db, along with the subscriber interface
which gives us subscriptions for free.
simple display of subscribers, adequate to the current design and
sufficient fallbacks for exceptional cases. @chad may
be mailed about that one more UI element may be added to his redesign
mail support is messy. not generic at all. only sends to subscribed non-authors.
Test Plan:
tried out all kinds of stuff. applied patch, subscribed, unsubscribed with multiple
accs. verified proper
edited documents, verified that mail was sent in MetaMTA. Verified
contents, tos and stuff by looking into the db, comparing PHIDs etc.
functional testing per serious MTA (that is, AWS SES) worked wonderfully.
Here's how the subscription list looks like:
{F36320, layout=link}
Reviewers: epriestley, chad, btrahan
Reviewed By: epriestley
CC: hfcorriez, aran, Korvin
Maniphest Tasks: T2686, T2694
Differential Revision: https://secure.phabricator.com/D5372
Conflicts:
src/infrastructure/storage/patch/PhabricatorBuiltinPatchList.php
Summary: Added a column called explicit_upload to Phabricator_File.file table
Test Plan: By chekcing locally if the the column has been added in table using mysql commands.
Reviewers: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5384
Summary: Adds a gradient, also re-ran sprite generator to attempt to sprite - for some reason all images were un-optimized.
Test Plan: Test on UI Examples page
Reviewers: epriestley, btrahan
Reviewed By: btrahan
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5354
Summary:
this diff does a few, not so exciting things
- changes "conpher" to "conpherence" where it snuck into CSS, spritemap, etc -- I believe we now consistently call it conpherence. Feel free to change it, just change it everywhere. :D
- puts the widget icons in the right order per M14
- makes the "mobile-only" widgets show the toggles only in the mobile view
- also made it so clicking them does nothing for now
- removes the tasks widget since we don't want it
...my time is getting chopped up funny (yay puppy) so this is just an attempt at something that can go into the codebase and not make it worse. Next up is making the widgets that show on desktop look right / not say "TODO"
Test Plan: played around in Conpherence
Reviewers: epriestley, chad
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2530
Differential Revision: https://secure.phabricator.com/D5334
Test Plan:
Applied the patch.
Looked at blame and plain blame of SVN and Git file.
Ran the lint saver.
Looked at lint messages list.
/diffusion/lint/
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5218
Test Plan:
Store large amounts of text into a string auxiliary field. It should
be stored successfully rather than truncated.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2575
Differential Revision: https://secure.phabricator.com/D5246
Summary: Simplify the look of the mobile menu, provide active states for the menu icons.
Test Plan: iOS Simulator and Chrome.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2426
Differential Revision: https://secure.phabricator.com/D5189
Summary:
Move Diffusion to be hovercard-ready, and expand our ability to resolve commit references.
- Link unqualified hashes of 7 characters or more which match a commit.
- Link qualified hashes of 5 characters or more which match a commit.
- Support `{...}` syntax.
Test Plan: {F33896}
Reviewers: chad, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D5121
Summary: Makes the visual size 2px larger and hit area 4px bigger on notification and message icons.
Test Plan: Review icons in sandbox, test new layout with notifications or messages.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5127
Summary:
The last commit broke update_phabricator.sh for me when it tried to migrate channel names into its own table.
It's a fairly straight forward patch and I'm almost certain I fixed it correctly. :)
Test Plan: Made small changes, ran update_phabricator.sh, repeat until the errors went away.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5116
Summary: Deleted the channel field and added a sql patch to drop the channel field.
Test Plan: I have messed up my local mysql:P, hence by storage upgrade is failing. Anyways, The chatlog_event table shouldn't contain the channel column now.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5011
Test Plan: Ran it on test DB.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5061
Summary:
Fixes T2563. Instead of rendering "rPnnnnnn", render "rPnnnnnn: add feature X". Tweak Audit tables to accommodate.
@vrana / @nh, this migration might take a while. You could safely skip it when deploying and then run it after deployment.
I think I fixed all the other places where these render, but might have missed something.
Test Plan:
- Ran first schema migration, clicked around to make sure nothing broke.
- Ran `scripts/repository/reparse.php --message rXyyyyy`, verified summary populated.
- Ran second migration.
- Checked task/diffusion/audit/differential for weird rendering.
Reviewers: vrana
Reviewed By: vrana
CC: nh, aran, chrisbolt, allixsenos
Maniphest Tasks: T2563
Differential Revision: https://secure.phabricator.com/D5012
Summary: Added ttl field to files. Gabage collect files with expired ttl
Test Plan: created file with a ttl. Let garbage collector run
Reviewers: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4987
Summary: Fixes T2559 with an incredibly original patch which I came up with myself.
Test Plan:
$ ./bin/storage upgrade -f
Applying patch 'phabricator:20130218.longdaemon.sql'...
Storage is up to date. Use 'storage status' for details.
Reviewers: edward
Reviewed By: edward
CC: aran
Maniphest Tasks: T2559
Differential Revision: https://secure.phabricator.com/D5006
Summary: Php schema patch to update channel id's of past events.
Test Plan: Having some proxy issues here due to which connection is timing out and bot is not able to log into IRC. Bot connects to IRC in my home though ! So I wasn't able to quite to test this by running storage upgrade.
Reviewers: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5000
Summary: We currently garbage collect general cache entries after a set period of time (30 days by default), but the recent changes to DarkConsole have left us writing a lot of large, short-TTL data to the cache. In addition to a maximum age, GC cache entires after they TTL out.
Test Plan: Ran GC daemon, saw TTL'd entries get collected. Inserted a TTL'd entry, saw it get collected by GC. Saw non-ttl'd entries not get collected.
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4990
Summary:
The map had "conph" but everything else refers to "conpher". The "conph" sprite thing won when I regenerated sprites for tokens.
I should just fix this so it can't happen, but unbreak for now. Renamed "conph" -> "conpher", regenerated sprites, nuked all the "conph" stuff.
Test Plan: Looked at Conpherence, saw icons.
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4982
Summary: This doesn't fully update the docs, but at least removes the most blatant lies.
Test Plan: looked at the document with my eyeballs
Reviewers: indiefan, staticshock
Reviewed By: staticshock
CC: aran
Differential Revision: https://secure.phabricator.com/D4959
Summary: Added a column channelID column to phabricator_chatlog.chatlog_event
Test Plan: Checked through mysql to see if table is updated
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4956
Summary: Added 20130214.chatlogchannel.sql in resources/sql/patches to add a new table
Test Plan: Hmmmmm .......
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4952
Summary:
mainly, this adds the image cropper - yay!
- also removes the file image from the handle stuff I added in V1. now we do all this crazy photo stuff.
Test Plan:
- uploaded a photo by dragging to header and noted 120 x 80 showed up on reload
- uploaded a photo by dragging to edit dialogue spot and noted 120 x 80 showed up on reload
- cropped a photo - noted it cropped right
- cropped a photo again and again and again - seems like it crops okay
Reviewers: epriestley, chad
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2418, T2399
Differential Revision: https://secure.phabricator.com/D4790
Summary:
Ugh, just wrote out a huge message, only to lose it with a fat-fingered ctrl-c. Le sigh.
First pass at decoupling the bot from the protocol. Noticeably absent is the command/message coupling. After this design pass I'll give that a go. Could use some advice, thinking that handlers should only create messages (which can be public or private) and not open ended, undefined 'commands'. The problem being that there needs to be some consistant api if we want handlers to be protocol agnostic. Perhaps that's a pipedream, what are your thoughts?
Secondly, a few notes, design review requests on the changes i did make:
# Config. For now i'm passing config through to the adapter. This was mainly to remain backwards compatible on the config. I was thinking it should probably be namespaced into it's own subobject though to distinguish the adapter config from the bot config.
# Adapter selection. This flavor is the one-bot-daemon, config specified protocol version. The upside is that in the future they won't have to run different daemons for this stuff, just have different config, and the door is open for multiple protocol adapters down the road if need be. The downside is that I had to rename the daemon (non-backwards compatible change) and there will need to be some sort of runtime evaluation for instatiation of the adapter. For now I just have a crude switch, but I was thinking of just taking the string they supply as the class name (ala `try { new $clasName(); } catch...`) so as to allow for homegrown adapters, but I wasn't sure how such runtime magic would go over. Also, an alternative would be to make the PhabricatorBot class a non-abstract non-final base class and have the adapters be accompanied by a bot class that just defines their adapter as a property. The upside of which is backwards compatibility (welcome back PhabricatorIRCBot) and perhaps a little bit clearer plugin path for homegrowners.
# Logging. You'll notice I commented out two very important logging lines in the irc adapter. This isn't intended to remain commented out, but I'm not sure what the best way is to get logging at this layer. I'm wary of just composing the daemon back down into the adapter (bi-directional object composition makes my skin crawl), but something needs to happen, obviously. Advice?
That's it. After the feedback on the above, you can either merge down, or wait until i finish the command/message refactor if you don't think the diff will grow too large. Up to you, this all functions as is.
Test Plan: Ran an irc bot, connected, read input, and wrote output including handler integration.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2462
Differential Revision: https://secure.phabricator.com/D4757
Test Plan: Ran the migration on a single revision, verified DB, called `loadUnsubscribedPHIDs()`.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4786
Summary: Let's see if I did this right. This adds on and off state icons (1 and 2x) for conpherence. I think I need to tweak and add more CSS to have the off hover state be the on icon. Will check.
Test Plan: spritegen
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2400
Differential Revision: https://secure.phabricator.com/D4709
Summary: Adds notification icons for Conpherence and re-writes the CSS a bit for the new icons and states. I removed the background bubble here and went straight CSS. I also seem to have a JS error and the notification menu doesn't display, but I'm tired and wanted to look at this in Differential. Will update after JS fix.
Test Plan: Turned on notification numbers and conpherence numbers, turned them off. Made them big. Checked FF and IE.
Reviewers: epriestley, btrahan
Reviewed By: btrahan
CC: aran, Korvin
Maniphest Tasks: T2415
Differential Revision: https://secure.phabricator.com/D4666
Summary: Reload Homepage. See icons. Not positive will keep this icon, as it's smaller in mass than others. Will look around.
Test Plan: Photoshop
Reviewers: epriestley, btrahan
Reviewed By: btrahan
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4652
Summary: it's ugly. but it works. basically. See T2399 for a roughly prioritized list of what still needs to happen.
Test Plan:
- created a conpherence with myself from my profile
- created a conpherence with myself from "new conpherence"
- created a conphernece with another from "new conpherence"
- created a conpherence with several others
- created a conpherence with files in the initial post
- verified files via comment text ("{F232} is awesome!") and via traditional attach
- edited a conpherence image
- verified it showed up in the header and in the conpherence menu on the left
- edited a conpherence title
- verified it showed up in the header and in the conpherence menu on the right
- verified each widget showed up when clicked and displayed the proper data
- calendar being an exception since it sucks so hard right now.
Reviewers: epriestley, chad
Reviewed By: epriestley
CC: aran, epriestley, chad, codeblock, Korvin
Maniphest Tasks: T2301
Differential Revision: https://secure.phabricator.com/D4620
Summary: The easiest approach here is proably to provide a more specific rule in the sheet CSS. This saves us from having to write any JS, notably.
Test Plan: Hovered over "+" on homepage.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4579
Summary: D4453 and D4427 sailed past one another, like ships in the night.
Test Plan: Verified Differential hover and selected states.
Reviewers: asherkin, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4577
Summary:
Patches often read from slaves (possibly stale data) and use that information to write on master.
It causes problems when applying more patches quickly after each other because data created in previous patch may not be replicated yet.
Test Plan:
$ bin/storage upgrade
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4483
Summary: These can all fit into the gradient sprite.
Test Plan: Looked at menu with selected item, hovered over menu.
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4453
Summary: Allows to easily disable responding to "where is..."
Test Plan: Run ircbot with and without the handler
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4444
Summary: Also provide a way to update old files metadata.
Test Plan: Create a revision which includes a image file. Check whether the widht, height metadata exists. Run `scripts/files/manage_files.php metadata --all` to update previously uploaded files.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2101
Differential Revision: https://secure.phabricator.com/D4347
Summary: this can happen if you have Phabricator and email lists co-mingling such that Phabricator receives an email multiple times. we can prevent this from then spamming everyone or otherwise taking the action multiple times by storing a message id hash and dropping the message if we have more than one message that matches.
Test Plan: simulated sending the same email multiple times on the command line. noted only the first one made it through.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1726
Differential Revision: https://secure.phabricator.com/D4328
Summary: Use ApplicationTransactions in Config to create an edit history. Resolves T2256.
Test Plan: {F28477}
Reviewers: btrahan, codeblock
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2256
Differential Revision: https://secure.phabricator.com/D4314
Summary:
This is somewhat clowny, particularly in how it handles JSON encode/decode, but
I've commented why I did things the way I did. The goal is to store minified JSON
but show pretty-printed JSON where possible, to the user editing it.
Test Plan:
* Went to /config/ and saw a list of keys from the `default` config.
* Clicked on one of them, submitted the default value successfully.
* Changed the value to invalid JSON and got a decent error.
* Changed the value to valid JSON and checked the DB to confirm it saved.
* Confirmed the DB values were minified.
* Confirmed the user-facing values were pretty-printed where they could be.
* Confirmed that PHIDs were getting assigned properly and that isDeleted
properly defaulted to false/0.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2246
Differential Revision: https://secure.phabricator.com/D4290
Summary:
See discussion in D4204. Facebook currently has a 314MB remarkup cache with a 55MB index, which is slow to access. Under the theory that this is an index size/quality problem (the current index is on a potentially-384-byte field, with many keys sharing prefixes), provide a more general index with fancy new features:
- It implements PhutilKeyValueCache, so it can be a component in cache stacks and supports TTL.
- It has a 12-byte hash-based key.
- It automatically compresses large blocks of data (most of what we store is highly-compressible HTML).
Test Plan:
- Basics:
- Loaded /paste/, saw caches generate and save.
- Reloaded /paste/, saw the page hit cache.
- GC:
- Ran GC daemon, saw nothing.
- Set maximum lifetime to 1 second, ran GC daemon, saw it collect the entire cache.
- Deflate:
- Selected row formats from the database, saw a mixture of 'raw' and 'deflate' storage.
- Used profiler to verify that 'deflate' is fast (12 calls @ 220us on my paste list).
- Ran unit tests
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4259
Summary: Update to new UI stuff, prepare for mobile.
Test Plan: {F27167}
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4198
Summary: This tones down the glow and highlight for a cleaner hover experience.
Test Plan: chrome, firefox
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4207
Summary:
Split Pholio's transaction implementation into generic and application-specific parts. Moves us toward generic transactions, with support for:
- Editing and deleting comments.
- Setting visibility of individual comments (I'm not a fan of this feature but we'll see).
I want to move everything to a more generic piece of infrastructure but there's very little they can share right now so adding transactions to, e.g., Paste or Macros (T2157) means massive amounts of similar code.
Tons of work left to do here, but I think it basically works. Here's a screenshot:
{F26820}
Test Plan: Made transactions in Pholio.
Reviewers: btrahan, vrana, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2104
Differential Revision: https://secure.phabricator.com/D4136
Summary:
- Remove unused CSS rules and non-sprite images.
- Sprite the logo.
Test Plan: Looked at site, looked good.
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4113
Summary:
Issues here:
- Need an application-sized "eye", or a "home" icon for "Phabricator Home".
- Some of the "apps_lb_2x" sliced images are the "_dark_" versions, not the light versions.
- If you slice an application-sized "logout" (power off) icon and application-sized "help" (questionmark in circle) icon I can replace the current menu icons and nearly get rid of "autosprite".
- To replace the icons on /applications/, the non-retina size is "4x", so we'd need "8x" for retina. Alternatively I can reduce the icon sizes by 50%.
- The "Help", "Settings" and "Logout" items currently have a "glowing" hover state, which needs a variant (or we can drop it).
- The /applications/ icons have a white hover state (or we can drop it).
- The 1x application (14x14) icons aren't used anywhere right now, should they be? Maybe in the feed in the future, etc?
- The "apps-2x" and "apps-large" sheets are the same image, but getting them to actually use the same file is a bit tricky, so I just left them separate for now.
Test Plan:
{F26698}
{F26699}
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1960
Differential Revision: https://secure.phabricator.com/D4108
Summary: Do we have an icon with 2x for the right menu?
Test Plan: {F26590}
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1960
Differential Revision: https://secure.phabricator.com/D4101
Summary:
This doesn't lay in everything, but:
- Break the buttons gradient apart into components and rebuild it (along with other gradients) into a single gradient sprite (possible after {D4099}).
- Use the sliced gradient for the crumbs background.
- Use the sliced image for the crumb divider.
- Adds the black/white app sheets, but I'm not generating them quite yet.
Test Plan: {F26537} {F26540}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T1960
Differential Revision: https://secure.phabricator.com/D4100
Summary: Switch to the final versions of these
Test Plan: Will add screenshots...
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4032
Summary:
- The filesystem is now the authority for which sprites are available. If you add new icons, the generation process will pick them up.
- I broke out icon generation and added retina support. App icon generation still uses the old method.
- Update ActionList and RemarkupControl to use the new sheet.
- Use white icons on hover.
- Also fixed a couple of minor issues with some stuff in Firefox/Chrome.
Test Plan:
{F25750}
{F25751}
{F25752}
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2013
Differential Revision: https://secure.phabricator.com/D4027
Summary:
- Since we'll never serve these directly, move them to resources/. This makes generating the Celerity map faster and reduces the size of the result map, since we don't need to analyze resources we'll never serve.
- Also Rename the 2x `subscribe-remove` to `subscribe-delete` since they were named inconsistently. Everything else is in good shape.
Test Plan: Generated sprites as per D4025
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2013
Differential Revision: https://secure.phabricator.com/D4026
Summary:
I'm not going to land this until it's a bit more fleshed out since it would just confuse users, but this is probably more reviewable as a few diffs adding a couple features than one ULTRA-diff adding everything. Implement application basics for Pholio. This does more or less nothing, but adds storage, subscribe, flag, markup, indexing, query basics, PHIDs, handle loads, a couple of realy really basic controllers, etc.
Basic hierarchy is:
- **Moleskine**: Top-level object like a Differential Revision, like "Ponder Feed Ideas".
- **Image**: Each Moleskine has one or more images, like the unexpanded / expanded / mobile / empty states of feed.
- **Transaction**: Comment or edit, like Maniphest. I generally want to move most apps to a transaction model so we can log edits.
- **PixelComment**: Equivalent of an inline comment.
Test Plan: Created a fake object and viewed it.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran, davidreuss
Maniphest Tasks: T2097
Differential Revision: https://secure.phabricator.com/D3817
Summary:
People hit three issues with D3914:
- As per T2059, we applied a schema change from a `.php` patch, which currently does not work if you use a different user to make schema changes than for normal use.
- Since the change in question is idempotent, just move it to a `.sql` patch. We'll follow up in T2059 and fix it properly.
- Rogue daemons at several installs used old code (expecting autoincrement) to insert into the new table (no autoincrement), thereby creating tasks with ID 0.
- Rename the table so they'll fail.
- This also makes the code a little more consistent.
- Some installs now have tasks with ID 0.
- Use checks against null rather than against 0 so we can process these tasks.
The major issues this fixes are the schema upgrade failure in T2059, and the infinite loops in T2072 and elsewhere.
This isn't really a fully statisfactory fix. I'll discuss some next steps in T2072.
Test Plan: Created new tasks via MetaMTA/Differential. Ran tasks with `phd debug taskmaster`. Inserted a task 0 and verified it ran and archived correctly.
Reviewers: btrahan, vrana, nh
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2072, T2059
Differential Revision: https://secure.phabricator.com/D3973
Summary: This saves lint errors to the path change of current commit. It requires pushed revision. It doesn't save difference from previous commit mentioned in T2038#comment-4 - I don't plan doing it after all, everything would be much more complicated and the amount of data saved with this approach isn't that bad.
Test Plan: Applied patch, ran script, verified DB.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2038
Differential Revision: https://secure.phabricator.com/D3899
Summary:
We need to revert this patch and we will need to re-apply it later.
We can't drop the table and delete these rows as we need to run both versions for a temporary period.
Test Plan: Applied it.
Reviewers: epriestley, nh
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3924
Summary: don't need it now that uploading files is so easy. Plus it made for some buggy jonx if / when there were bad image links coupled with caching. In theory this is a lot less pretty though if folks linked to a bunch of files served elsewhere using images.
Test Plan: http://does-not-exist.com/imaginary.jpg rendered as a link!
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2000
Differential Revision: https://secure.phabricator.com/D3908
Summary: See D3912 for discussion. InnoDB may reuse autoincrement IDs after restart; provide a way to avoid it.
Test Plan: Unit tests. Scheduled and executed tasks through `drydock lease --type host` and `phd debug taskmaster`.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3914
Summary: We don't link Q1 - Q4.
Test Plan: Created the table, insterted row, verified that the id is 11.
Reviewers: pieter, epriestley
Reviewed By: pieter
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3891
Summary:
This commit doesn't change license of any file. It just makes the license implicit (inherited from LICENSE file in the root directory).
We are removing the headers for these reasons:
- It wastes space in editors, less code is visible in editor upon opening a file.
- It brings noise to diff of the first change of any file every year.
- It confuses Git file copy detection when creating small files.
- We don't have an explicit license header in other files (JS, CSS, images, documentation).
- Using license header in every file is not obligatory: http://www.apache.org/dev/apply-license.html#new.
This change is approved by Alma Chao (Lead Open Source and IP Counsel at Facebook).
Test Plan: Verified that the license survived only in LICENSE file and that it didn't modify externals.
Reviewers: epriestley, davidrecordon
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2035
Differential Revision: https://secure.phabricator.com/D3886
Summary:
Tightens up a bunch of stuff:
- In `drydock lease`, pull and print logs so the user can see what's happening.
- Remove `DrydockAllocator`, which was a dumb class that did nothing. Move the tiny amount of logic it held directly to `DrydockLease`.
- Move `resourceType` from worker task metadata directly to `DrydockLease`. Other things (like the web UI) can be more informative with this information available.
- Pass leases to `allocateResource()`. We always allocate in response to a lease activation request, and the lease often has vital information. This also allows us to associate logs with leases correctly.
Test Plan: Ran `drydock lease --type host` and saw it perform a host allocation in EC2.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3870
Summary:
This was the major goal of D3859/D3855, and to a lesser degree D3854/D3852.
As Drydock is allocating a resource, it may need to allocate other resources first. For example, if it's allocating a working copy, it may need to allocate a host first.
Currently, we have the process basically queue up the allocation (insert a task into the queue) and sleep() until it finishes. This is problematic for a bunch of reasons, but the major one is that if allocation takes more resources (host, port, machine, DNS) than you have daemons, they could all end up sleeping and waiting for some other daemon to do their work. This is really stupid. Even if you only take up some of them, you're spending slots sleeping when you could be doing useful work.
To partially get around this and make the CLI experience less dumb, there's this goofy `synchronous` flag that gets passed around everywhere and pushes the workflow through a pile of special cases. Basically the `synchronous` flag causes us to do everything in-process. But this is dumb too because we'd rather do things in parallel if we can, and we have to have a lot of special case code to make it work at all.
Get rid of all of this. Instead of sleep()ing, try to work on the tasks that need to be worked on. If another daemon grabbed them already that's fine, but in the worst case we just gracefully degrade and do everything in process. So we get the best of both worlds: if we have parallelizable tasks and free daemons, things will execute in parallel. If we have nonparallelizable tasks or no free daemons, things will execute in process.
Test Plan: Ran `drydock_control.php --trace` and saw it perform cascading allocations without sleeping or special casing.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3861
Summary:
Currently, when taskmasters complete a task it is immediately deleted. This prevents us from doing some general things, like:
- Supporting the idea of permanent failure (e.g., after N failures just stop trying).
- Showing the user how fast taskmasters are completing tasks.
- Showing the user how long tasks took to complete.
Having better visibility into this is important to Drydock, which builds on the task system. Also, generally buff debug output for task execution.
Test Plan: Ran `bin/phd debug taskmaster`. Ran `bin/phd debug garbage`. Queued some tasks via various systems.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3852
Summary: you can now add, edit, and delete status events. also added a "description" to status events and surface it in the big calendar view on mouse hover. some refactoring changes as well to make validation logic centralized within the storage class.
Test Plan: added, edited, deleted. yay.
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T407
Differential Revision: https://secure.phabricator.com/D3810
Summary:
This leaves the UI in a pretty rough state, but implements blog policy controls and queries, and 1:1 relationships between posts and blogs. Needs a bunch more cleanup but seemed like an okayish breaking point in terms of cohesiveness.
Posts have these rules:
- Drafts are visible only to the author.
- Published posts are visible to anyone who can see the blog they appear on.
- Posts are only editable by the author.
...so we don't need any special policy UI or state to accommodate these rules.
Posts may have no blog if they're grandfathered in or you write a post to a blog and then lose the ability to see the blog. This is the messiest edge case -- specifically:
- You write a post to blog A.
- You publish the post.
- I edit the "Visible To:" for blog A and set it to exclude you.
What we do in this case is let you see the post in "My Posts", but you can no longer see the blog and you'll see the post as not being part of a blog. We can maybe give you some UI to let you move it later or something.
Test Plan: Hit all (I think?) of the interfaces without issues. Definitely some UI problems still right now.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3694
Summary:
Adds "can view" and "can edit" policies to blogs. Replaces "bloggers" with "can join".
This doesn't fully remove "bloggers" because I didn't want this to get too crazy/huge.
Test Plan: Created, edited, deleted blogs.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3693
Summary:
We need to go slightly farther to stub reply handler functionality for Ponder in at least some configurations, where we rely on the presence of a unique random key to generate per-object or per-object+user reply addresses.
This should probably be formalized in an interface since it's currently pretty ad-hoc.
Test Plan:
- Made comments in Ponder under a per-user email configuration.
- Ran migration, verified mail keys were generated.
- Ran migration again (with --apply), verified existing questions were skipped.
- Created a new question, verified mail key generation.
Reviewers: pieter
Reviewed By: pieter
CC: aran
Maniphest Tasks: T1873
Differential Revision: https://secure.phabricator.com/D3665
Summary:
It isn't deleted by `storage destroy`.
This should be a no-op on current storage because we execute `CREATE DATABASE IF NOT EXISTS`.
Test Plan:
$ bin/storage destroy --dryrun
Reviewers: nh, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3659
Summary: this then enables people to create blog.theircompany.com. And for us, blog.phacility.com...!
Test Plan:
- created custom URIs of various goodness and verified the error messages were sensical.
- verified if "false" in configuration then custom uri stuff disappears
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3542
Summary:
It happens to me quite often that I leave the window with revision (by closing it or by visiting a link from it).
When I return then the comment draft is there so I clowncopterize it but forget that I wanted to take some other action than Comment.
Test Plan: Selected "Add Reviewers", added some reviewers, closed the window, opened it - the action and reviewers were still there.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3530
Summary:
People have occasionally complained about phabricator being slow. We have
the access log to look at to see when slowness happens, but it doesn't tell
us much about why it happened. Since it's usually a sporadic issue that's
reported, it's hard to reproduce and then profile. This change will allow us
to collect sampled profiles so we can look at them when slowness occurs.
Test Plan:
checking that sampling works correctly:
- set rate to 0; do several page loads; check no new entries in table
- set rate to 1; check that there's a new row in the table for each page load
- set rate to 10; check that some requests write to table and some don't
check new ui for samples:
- load /xhprof/list/all/, see a list with a lot of samples
- load /xhprof/list/sampled/, see only sampled runs
- load /xhprof/list/manual/, see only non-sampled runs
- load /xhprof/list/my-runs/, se only my manual runs
Reviewers: vrana, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3458
Summary: Add storage to Pastes for view policies.
Test Plan: Set policies on pastes, see next diff.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3474
Summary: This is pretty spartan, but it does the job.
Test Plan:
Patch, update storage, add some comment
to your favorite question or answer.
Reviewers: nh, vrana, epriestley
Reviewed By: epriestley
CC: aran, Korvin, starruler, syrneus, me.here, victorzarate7
Maniphest Tasks: T1645
Differential Revision: https://secure.phabricator.com/D3471
Summary: We use numbers here and I see no reason for strings.
Test Plan:
$ bin/storage upgrade
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3303
Summary: This is arguably a more useful view than listing all daemons.
Test Plan: Looked at list, only saw daemons that haven't exited
Reviewers: vrana, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3286
Summary:
- In ProjectQuery, always load the viewer's membership in the project because we need it to perform a CAN_VIEW test.
- Add storage for the view, edit and join policies.
- A user can always view a project if they are a member.
- A user can always join a project if they can edit it.
- Editing a project requires both "view" and "edit" permissions, and edit does not imply view.
- This has no effect on the application yet.
Test Plan: See next diff.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3219
Summary:
Ponder is similar in spirit to the Wiki tool, but uses a Q&A
format and up/downvotes to signal user sentiment. Popular
questions are moved to the top of the feed on a 5-minute
cycle based on age (younger is better) and vote count (higher
is better).
Pre-apologies for noob diff.
Test Plan:
- `./bin/phd list` Should include `PonderHeatDaemon`; phd launch it
if necessary.
- Navigate to /ponder/ ; observe sanity when adding questions,
voting on them, and adding answers.
- Confirm that questions and answers are linkable using Q5 / Q5#A5 formatted object links.
- Confirm that searching for Ponder Questions works using built-in
search.
Feedback on code / schema / whatever organization very welcome.
Reviewers: nh, vrana, epriestley
Reviewed By: epriestley
CC: gmarcotte, aran, Korvin, starruler
Differential Revision: https://secure.phabricator.com/D3136
Summary: See discussion in D3078 for why I've separated this. Pretty sure it's not quite ready yet -- I want to build a couple of things on it so we have a better idea of what we need (autoincrement ID? <factType, objectA, epoch> primary key? objectB column? valueZ?) and don't need to do a ton of schema patches.
Test Plan: Applied patches, ran D3078.
Reviewers: vrana, btrahan, majak
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1581, T1562
Differential Revision: https://secure.phabricator.com/D3088
Summary:
- Store project members in edges.
- Migrate existing members to edge storage.
- Delete PhabricatorProjectAffiliation.
- I left the actual underlying data around just in case something goes wrong; we can delete it evenutally.
Test Plan:
- Ran migration.
- Created a new project.
- Joined and left a project.
- Added and removed project members.
- Manually called PhabricatorOwnersOwner::loadAffiliatedUserPHIDs() to verify its behavior.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3186
Summary:
See T1602.
This is just the minimal functional patch; the scripts will continue
working because of the `DEFAULT ''`.
Test Plan:
Can't fully test this until I get more code working, but
nothing broke horribly yet.
Reviewers: epriestley
Reviewed By: epriestley
CC: nh, aran, Korvin
Maniphest Tasks: T1602
Differential Revision: https://secure.phabricator.com/D3147
Summary:
To make it easier to monitor daemons, let's store their current state
(running, died, exited, or unknown) to the db. The purpose of this is to
provide more information on the daemon console about the status of daemons,
especially when they are running on multiple machines. This is mostly backend
work, with only a few frontend changes. (It is also dependent on a change
to libphutil.)
These changes will make dead or stuck daemons more obvious, and will allow
more work on the frontend to hide daemons (and logs) that have exited cleanly,
i.e. ones we don't care about any more.
Test Plan:
- run db migration, check in db that all daemons were marked as exited
- start up a daemon, check in db that it is marked as running
- open web interface, check that daemon is listed as running
- after daemon has been running for a little bit, check in db that dateModified
is being updated (indicating daemon is properly sending heartbeat)
- kill -9 daemon (but don't run bin/phd yet), and check that db still shows it
as running
- edit daemon db entry to show it as being on a different host, and backdate
dateModified field by 3 minutes, and check the web ui to show that the status
is unknown.
- change db entry to have proper host, check in web ui that daemon status is
displayed as dead. Check db to see that the status was saved.
- run bin/phd stop, and see that the formerly dead daemon is now exited.
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3126
Summary:
- Add edges for this relationship.
- Use edges to store this data.
- Migrate old data.
- Fix some warnings with generating feed stories about Aux and Edge transactions.
- Fix a task-task edge issue with "Create Subtask".
Test Plan:
- Migrated data, verified reivsions showed up.
- Attached and detached tasks to revisions and vice versa.
- Created a new revision with attached tasks.
- Created a subtask.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3018
Summary:
blogs are collections of posts. a blog also has metadata like a name, description and "bloggers" that can edit the metadata of the blog and contribute posts.
changes include the post edit flow where bloggers can now select which blogs to publish to. also made various small tweaks throughout the UI to make things sensical and clean as the concept of blogs is introduced.
there's edges powering this stuff. bloggers <=> blogs and posts <=> blogs in particular.
Test Plan:
made blogs, deleted blogs, tried to make blogs with no bloggers. all went well.
verified ui to publish only showed up for public posts, published posts to blogs, un-published posts to blogs, re-published posts to blogs, deleted posts and verified they disappeared from blogs.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3003
Summary: See D3006. Move this data to the edge store.
Test Plan:
- Created dependencies, migrated, verified dependencies were preserved.
- Added new dependencies, they worked.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1162
Differential Revision: https://secure.phabricator.com/D3007
Summary:
- Use edges to store "X depends on Y" information in Maniphest.
- Show both "Depends On" and "Dependent Tasks".
- Migrate all the old edges.
Test Plan:
- Added some relationships, migrated, verified they were preserved.
- Added some new valid relationships, verified tasks got updated with sensible transactions and sent reasonable emails.
- Tried to add a cycle, got an ugly but effective error.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1162
Differential Revision: https://secure.phabricator.com/D3006
Summary:
- See D2945.
- Drop `cache` field from ManiphestTransaction.
- Render task descriptions and transactions through PhabricatorMarkupEngine.
- Also pull the list of macros more lazily.
Test Plan:
- Verified transactions and transaction preview work correctly and interact with cache correctly.
- Verified tasks descriptions and task preview work correctly.
- Verified we don't hit the imagemacro table when we're rendering everything from cache anymore.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2946
Summary:
The immediate issue this addresses is T1366, adding a rendering cache to Phriction. For wiki pages with code blocks especially, rerendering them each time is expensive.
The broader issue is that out markup caches aren't very good right now. They have three major problems:
**Problem 1: the data is stored in the wrong place.** We currently store remarkup caches on objects. This means we're always loading it and passing it around even when we don't need it, can't genericize cache management code (e.g., have one simple script to drop/GC caches), need to update authoritative rows to clear caches, and can't genericize rendering code since each object is different.
To solve this, I created a dedicated cache database that I plan to move all markup caches to use.
**Problem 2: time-variant rules break when cached.** Some rules like `**bold**` are time-invariant and always produce the same output, but some rules like `{Tnnn}` and `@username` are variant and may render differently (because a task was closed or a user is on vacation). Currently, we cache the raw output, so these time-variant rules get locked at whatever values they had when they were first rendered. This is the main reason Phriction doesn't have a cache right now -- I wanted `{Tnnn}` rules to reflect open/closed tasks.
To solve this, I split markup into a "preprocessing" phase (which does all the parsing and evaluates all time-invariant rules) and a "postprocessing" phase (which evaluates time-variant rules only). The preprocessing phase is most of the expense (and, notably, includes syntax highlighting) so this is nearly as good as caching the final output. I did most of the work here in D737 / D738, but we never moved to use it in Phabricator -- we currently just do the two operations serially in all cases.
This diff splits them apart and caches the output of preprocessing only, so we benefit from caching but also get accurate time-variant rendering.
**Problem 3: cache access isn't batched/pipelined optimally.** When we're rendering a list of markup blocks, we should be able to batch datafetching better than we do. D738 helped with this (fetching is batched within a single hunk of markup) and this improves batching on cache access. We could still do better here, but this is at least a step forward.
Also fixes a bug with generating a link in the Phriction history interface ($uri gets clobbered).
I'm using PHP serialization instead of JSON serialization because Remarkup does some stuff with non-ascii characters that might not survive JSON.
Test Plan:
- Created a Phriction document and verified that previews don't go to cache (no rows appear in the cache table).
- Verified that published documents come out of cache.
- Verified that caches generate/regenerate correctly, time-variant rules render properly and old documents hit the right caches.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1366
Differential Revision: https://secure.phabricator.com/D2945
Summary:
A later diff adds unit tests against edges, but we need real objects to connect with edges. Add some trivial objects to the Harbormaster database to compliment the similar HarbormasterScratchTable.
On its own, this does nothing interesting.
Test Plan: Built unit tests on this in a followup.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1162
Differential Revision: https://secure.phabricator.com/D2937
Test Plan:
Altered database.
Wrote a custom translation and selected it in preferences.
Verified that the text is custom translated.
Set language back to default.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1139
Differential Revision: https://secure.phabricator.com/D2757
Summary:
Some e-mail clients display this header and it needs to be constant.
This is somehow involved but I doubt that there is a simpler solution.
Test Plan:
Applied SQL patch.
Commented on revision, commented on commit, changed package.
Verified that the `Thread-Topic` has constant and human readable value.
Reviewers: epriestley
Reviewed By: epriestley
CC: ola, aran, Korvin
Differential Revision: https://secure.phabricator.com/D2745
Summary: Made it possible to link and unlink LDAP accounts with Phabricator accounts.
Test Plan:
I've tested this code locally and in production where I work.
I've tried creating an account from scratch by logging in with LDAP and linking and unlinking an LDAP account with an existing account. I've tried to associate the same LDAP account with different Phabricator accounts and it failed as expected.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, auduny, svemir
Maniphest Tasks: T742
Differential Revision: https://secure.phabricator.com/D2722
Summary: Added `PhabricatorBuiltinPatchList` entry so that "storage upgrade" will update the database. Renamed and numbered the notification.sql patch.
Test Plan: Drop phabricator_feed.feed_storynotification table if it exists and run bin/storage upgrade to check if the patch is correctly applied.
Reviewers: epriestley, btrahan, allenjohnashton
Reviewed By: epriestley
CC: ddfisher, aran, Korvin
Differential Revision: https://secure.phabricator.com/D2687
Summary: First diff in a series of diffs to add notifications to Phabricator. This is the notification application ONLY. This commit does not include the changes to other applications that makes them add notifications. As such, no notifications will be generated beyond the initial database import.
Test Plan: This is part of the notifications architecture which has been running on http://theoryphabricator.com for the past several months.
Reviewers: epriestley, btrahan, ddfisher
Reviewed By: epriestley
CC: allenjohnashton, keebuhm, aran, Korvin, jungejason, nh
Maniphest Tasks: T974
Differential Revision: https://secure.phabricator.com/D2571
Summary: This is part of propagating the workflow `git commit -m 'One liner' && arc diff`.
Test Plan: Searched for references to this file.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2675
Summary:
- We currently write every PHID we generate to a table. This was motivated by two concerns:
- **Understanding Data**: At Facebook, the data was sometimes kind of a mess. You could look at a random user in the ID tool and see 9000 assocs with random binary data attached to them, pointing at a zillion other objects with no idea how any of it got there. I originally created this table to have a canonical source of truth about PHID basics, at least. In practice, our data model has been really tidy and consistent, and we don't use any of the auxiliary data in this table (or even write it). The handle abstraction is powerful and covers essentially all of the useful data in the app, and we have human-readable types in the keys. So I don't think we have a real need here, and this table isn't serving it if we do.
- **Uniqueness**: With a unique key, we can be sure they're unique, even if we get astronomically unlucky and get a collision. But every table we use them in has a unique key anyway. So we actually get pretty much nothing here, except maybe some vague guarantee that we won't reallocate a key later if the original object is deleted. But it's hard to imagine any install will ever have a collision, given that the key space is 36^20 per object type.
- We also currently use PHIDs and Users in tests sometimes. This is silly and can break (see D2461).
- Drop the PHID database.
- Introduce a "Harbormaster" database (the eventual CI tool, after Drydock).
- Add a scratch table to the Harbormaster database for doing unit test meta-tests.
- Now, PHID generation does no writes, and unit tests are isolated from the application.
- @csilvers: This should slightly improve the performance of the large query-bound tail in D2457.
Test Plan: Ran unit tests. Ran storage upgrade.
Reviewers: btrahan, vrana, jungejason
Reviewed By: btrahan
CC: csilvers, aran, nh, edward
Differential Revision: https://secure.phabricator.com/D2466
Summary:
- Move email to a separate table.
- Migrate existing email to new storage.
- Allow users to add and remove email addresses.
- Allow users to verify email addresses.
- Allow users to change their primary email address.
- Convert all the registration/reset/login code to understand these changes.
- There are a few security considerations here but I think I've addressed them. Principally, it is important to never let a user acquire a verified email address they don't actually own. We ensure this by tightening the scoping of token generation rules to be (user, email) specific.
- This should have essentially zero impact on Facebook, but may require some minor changes in the registration code -- I don't exactly remember how it is set up.
Not included here (next steps):
- Allow configuration to restrict email to certain domains.
- Allow configuration to require validated email.
Test Plan:
This is a fairly extensive, difficult-to-test change.
- From "Email Addresses" interface:
- Added new email (verified email verifications sent).
- Changed primary email (verified old/new notificactions sent).
- Resent verification emails (verified they sent).
- Removed email.
- Tried to add already-owned email.
- Created new users with "accountadmin". Edited existing users with "accountadmin".
- Created new users with "add_user.php".
- Created new users with web interface.
- Clicked welcome email link, verified it verified email.
- Reset password.
- Linked/unlinked oauth accounts.
- Logged in with oauth account.
- Logged in with email.
- Registered with Oauth account.
- Tried to register with OAuth account with duplicate email.
- Verified errors for email verification with bad tokens, etc.
Reviewers: btrahan, vrana, jungejason
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1184
Differential Revision: https://secure.phabricator.com/D2393
Summary:
I will use it for highlighting users which are not currently available.
Maybe I will also use it in the nagging tool.
I don't plan creating a UI for it as API is currently enough for us.
Maybe I will visualize it at /calendar/ later.
I plan creating `user.deletestatus` method when this one will be done.
Test Plan:
`storage upgrade`
Call Conduit `user.addstatus`.
Verify DB.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Koolvin
Differential Revision: https://secure.phabricator.com/D2382
Summary:
We will need it for two purposes:
- Status tool.
- Nagging tool - @aran suggested using "3 business days" and I don't want it to fall on New Year's Eve or such.
I don't plan working on any interface for editing this as this kind of data should be always imported.
Test Plan:
`bin/storage upgrade`
`scripts/calendar/import_us_holidays.php`
/calendar/
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Koolvin
Differential Revision: https://secure.phabricator.com/D2375
Summary:
Splits out the SQL changes. These are most of the changes, but primarily mechanical:
- Moved "initialize.sql" to "0000.legacy.sql" and partially reverted to an older version, such that patches 0000 + 000 + 001 + ... + 137 put us in the right state when applied sequentially.
- Removed "create database" commands from all SQL. These are handled by separate DB patches now, so we have the data to do operations like "storage databases" (list databases) and "storage destroy" (drop databases).
- Removed "phabricator_" namespace from all SQL, and replaced with "{$NAMESPACE}_" token so we can namespace databases.
- Shortened some column lengths so patches apply correctly if originally created as InnoDB; also a few similar tweaks elsewhere.
Test Plan: See D2323 for discussion and test plan.
Reviewers: edward, vrana, btrahan, jungejason
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T140, T345
Differential Revision: https://secure.phabricator.com/D2329
Test Plan:
Added CC's/Auditors, clicked the form elements, and saw correct
behaviour. Verified that metadata was present in the detail table.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley, 20after4, Koolvin
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D2002
Summary:
We will need it for intl.
I've put it to User instead of UserProfile to be easier accessible.
Test Plan:
Apply SQL patch.
Change sex to Male.
Change sex to Unknown.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Koolvin
Maniphest Tasks: T1139
Differential Revision: https://secure.phabricator.com/D2287
Summary:
This is slightly more complicated for this reason:
- We don't set `dateCommitted` for normal commits, only for markcommitted.
-- We need to add this date to old revisions now.
Test Plan:
Reparse a revision - commit date was set.
Conduit `markcommitted` - commit date was set.
Run SQL script.
Display closed revision.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Koolvin
Differential Revision: https://secure.phabricator.com/D2282
Summary:
Searching for empty query kills us because whole `search_document` table is read in this case.
This diff adds an index just for this query.
Other solution would be to disable searching for empty string. But it can be actually useful (listing newest documents of any type).
Test Plan:
lang=sql
EXPLAIN SELECT document.phid, document.documentType, document.documentTitle, document.documentCreated
FROM `search_document` document
GROUP BY document.phid
ORDER BY documentCreated DESC
LIMIT 0, 21;
Reviewers: epriestley
Reviewed By: epriestley
CC: jungejason, aran, Koolvin
Differential Revision: https://secure.phabricator.com/D2277
Summary:
Couple of small improvements:
- Delete `randomon` macro.
- Make name unique (deleting current conflicts randomly).
- Image macro must be alone on the line.
- Filter by name.
Test Plan:
Run SQL.
/file/macro/
/file/macro/?name=imagemacro
Try to create conflicting name.
Write this comment:
Test imagemacro.
imagemacro
Reviewers: aran, epriestley
Reviewed By: epriestley
CC: epriestley, Koolvin
Differential Revision: https://secure.phabricator.com/D2230
Summary:
The old version of this loads all differential revisions at once, but that much
can't all be loaded into memory when there are close to 500,000 revisions. This
diff splits up loading the revisions.
Test Plan: Ran this to run the migration in our install
Reviewers: jungejason, epriestley
Reviewed By: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D2243
Summary:
'cuz we need to be phamous!
V1 feature set
- posts
-- standard thing you'd expect - a title and a remarkup-powered body and...
-- "phame" title - a short string that can be used to reference the story. this gets auto-updated when you mess with the title.
-- configuration - for now, do you want Facebook, Disqus or no comments? this is a per-post thing but feeds from an instance-wide configuration
Please do toss out any must have features or changes.
Test Plan: played around with this bad boy like whoa
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, vrana
Maniphest Tasks: T1111
Differential Revision: https://secure.phabricator.com/D2202
Summary:
- We currently post-filter by branches, but should do this in SQL. See T799.
- We currently identify branch-name-matches as being in the working copy even if they belong to a different project (e.g., two different projects with commits on the branch "master"). See T1100.
- Denormalize branch and project information into DifferentialRevision.
- Expose project information in the API.
Test Plan: Ran conduit API queries with branches and arc project IDs, got reasonable results.
Reviewers: btrahan, vrana, jungejason
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1100, T799
Differential Revision: https://secure.phabricator.com/D2190
Summary:
There have been a couple of requests for this since bookmarks are "out this year like woah" and "totally uncool dude".
Allow users to save named custom queries and make them the /maniphest/ default if they so desire.
A little messy. :/
Test Plan: Saved, edited, deleted custom queries. Made custom query default; made 'no default' default. Verified default behavior. Issued a modified search from a custom query.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley, 20after4
Maniphest Tasks: T923, T1034
Differential Revision: https://secure.phabricator.com/D1964
Summary:
`116.utf8.sql` throws this under MySQL 5.5:
> Column length too big for column 'keyBody' (max = 21845); use BLOB or TEXT instead
I guess that's because MySQL 5.5 changed maximum length of UTF-8 character from 3 bytes to 4.
I've updated also `116.utf8.sql` for people with new installs.
Test Plan:
upgrade_schema.php
Reviewers: epriestley
Reviewed By: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D2117
Summary:
We have a lot of cases where we store object relationships, but it's all kind of messy and custom. Some particular problems:
- We go to great lengths to enforce order stability in Differential revisions, but the implementation is complex and inelegant.
- Some relationships are stored on-object, so we can't pull the inverses easily. For example, Maniphest shows child tasks but not parent tasks.
- I want to add more of these and don't want to continue building custom stuff.
- UIs like the "attach stuff to other stuff" UI need custom branches for each object type.
- Stuff like "allow commits to close tasks" is notrivial because of nonstandard metadata storage.
Provide an association-like "edge" framework to fix these problems. This is nearly identical to associations, with a few differences:
- I put edge metadata in a separate table and don't load it by default, to keep edge rows small and allow large metadata if necessary. The on-edge metadata seemed to get abused a lot at Facebook.
- I put a 'seq' column on the edges to ensure they have an explicit, stable ordering within a source and type.
This isn't actually used anywhere yet, but my first target is attaching commits to tasks for T904.
Test Plan: Made a mock page that used Editor and Query. Verified adding and removing edges, overwriting edges, writing and loading edge data, sequence number generation.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, 20after4
Differential Revision: https://secure.phabricator.com/D2088
Summary:
Like the title says, similar to Facebook Tasks.
Not sure how I really feel about this, but I guess it's kind of OK? I never used
this feature in Facebook Tasks but I think some people like it.
The drag-and-drop to repri across priorities feels okayish.
Because subpriority is a double and we just split the difference when
reprioritizing, you lose ~a bit of precision every time you repri two tasks
against each other and so you can break it by swapping the priorities of two
tasks ~50 times. This case is pretty silly and pathological. We can add some
code to deal with this at some point if necessary.
I think this also fixes the whacky task layout widths once and for all.
(There are a couple of minor UI glitches like headers not vanishing and header
counts not updating that I'm not fixing because I am lazy.)
Test Plan: Dragged and dropped tasks around.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley, mgummelt
Maniphest Tasks: T859
Differential Revision: https://secure.phabricator.com/D1731
Summary:
**Who can delete global rules?**: I discussed this with @jungejason. The current behavior is that the rule author or any administrator can delete a global rule, but this
isn't consistent with who can edit a rule (anyone) and doesn't really make much sense (it's an artifact of the global/personal split). I proposed that anyone can delete a
rule but we don't actually delete them, and log the deletion. However, when it came time to actually write the code for this I backed off a bit and continued actually
deleting the rules -- I think this does a reasonable job of balancing accountability with complexity. So the new impelmentation is:
- Personal rules can be deleted only by their owners.
- Global rules can be deleted by any user.
- All deletes are logged.
- Logs are more detailed.
- All logged actions can be viewed in aggregate.
**Minor Cleanup**
- Merged `HomeController` and `AllController`.
- Moved most queries to Query classes.
- Use AphrontFormSelectControl::renderSelectTag() where appropriate (this is a fairly recent addition).
- Use an AphrontErrorView to render the dry run notice (this didn't exist when I ported).
- Reenable some transaction code (this works again now).
- Removed the ability for admins to change rule authors (this was a little buggy, messy, and doesn't make tons of sense after the personal/global rule split).
- Rules which depend on other rules now display the right options (all global rules, all your personal rules for personal rules).
- Fix a bug in AphrontTableView where the "no data" cell would be rendered too wide if some columns are not visible.
- Allow selectFilter() in AphrontNavFilterView to be called without a 'default' argument.
Test Plan:
- Browsed, created, edited, deleted personal and gules.
- Verified generated logs.
- Did some dry runs.
- Verified transcript list and transcript details.
- Created/edited all/any rules; created/edited once/every time rules.
- Filtered admin views by users.
Reviewers: jungejason, btrahan
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D2040
Summary:
Flags are a personal collection of things you want to take a look at later. You can use several different colors and add notes.
Not really sure if this is actually a good idea or not but it was easy to build.
Planned features:
- Allow Herald rules to add flags.
- In the "edit flag" dialog, have a "[x] Subscribe Me" checkbox that CCs you.
- Support Diffusion.
- Support Phriction.
- Always show flags on an object if you have them (in every view)?
- Edit dialog feels a little heavy?
- More filtering in /flag/ tool.
- Add a top-level links somewhere?
Test Plan: Added, edited and removed flags from things. Viewed flags in flag view.
Reviewers: aran, btrahan
Reviewed By: btrahan
CC: aran, epriestley, Koolvin
Maniphest Tasks: T1041
Differential Revision: https://secure.phabricator.com/D2024
Summary:
- Still really really rough.
- Adds a full synchronous mode for debugging.
- Adds some logging.
- It can now allocate EC2 machines and put webroots on them in a hacky, terrible way.
- Adds a base query class.
Test Plan: oh hey look a test page? http://ec2-50-18-65-151.us-west-1.compute.amazonaws.com:2011/
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D2026
Summary:
This is in preparation for getting the "View Options" dropdown working on audits.
- Use Files to serve raw data so we get all the security benefits of the alternate file domain. Although the difficulty of exploiting this is high (you need commit access to the repo) there's no reason to leave it dangling.
- Add a "contentHash" to Files so we can lookup files by content rather than adding some weird linker table. We can do other things with this later, potentially.
- Don't use 'data' URIs since they're crazy and we can just link to the file URI.
- When showing a binary file or an image, don't give options like "show highlighted text with blame" or "edit in external editor" since they don't make any sense.
- Use the existing infrastructure to figure out if things are images or binaries instead of an ad-hoc thing in this class.
Test Plan: Looked at text, image and binary files in Diffusion. Verified we reuse existing files if we've already generated them.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1899
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
Summary: This is the script used for conversion: P319
Test Plan:
Update diff with UTF-8 characters in description.
`sql/upgrade_schema.php`
Verify data in DB and that it looks good on web.
Reviewers: epriestley, nh
Reviewed By: epriestley
CC: aran, epriestley
Maniphest Tasks: T327
Differential Revision: https://secure.phabricator.com/D1830
Summary:
Adds a macro handler that spams your channel with macros. Config is:
- macro.size: scale macros to this size before rasterizing
- macro.sleep: sleep this many seconds between lines (evade flood protection)
Test Plan: derpderp
Reviewers: kdeggelman, btrahan
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1838
Summary:
- Move table to Repository, since we have no Owners joins in the application anymore but would like to do a Repository join.
- Rename "packagePHID" to "auditorPHID", since this column may contain package, project, or user PHIDs.
Test Plan:
- Browsed Owners, Audit, and Differential interfaces to the Audit tool.
- Made comments and state changes.
- Ran "reparse.php --herald --owners" on several commits.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley, nh, vrana
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1787
Summary:
This diff makes the OAuthServer more compliant with the spec by
- making it return well-formatted error codes with error types from the spec.
- making it respect the "state" variable, which is a transparent variable the
client passes and the server passes back
- making it be super, duper compliant with respect to redirect uris
-- if specified in authorization step, check if its valid relative to the client
registered URI and if so save it
-- if specified in authorization step, check if its been specified in the access
step and error if it doesn't match or doesn't exist
-- note we don't make any use of it in the access step which seems strange but
hey, that's what the spec says!
This diff makes the OAuthServer suck less by
- making the "cancel" button do something in the user authorization flow
- making the client list view and client edit view be a bit more usable around
client secrets
- fixing a few bugs I managed to introduce along the way
Test Plan:
- create a test phabricator client, updated my conf, and then linked and
unlinked phabricator to itself
- wrote some tests for PhabricatorOAuthServer -- they pass!
-- these validate the various validate URI checks
- tried a few important authorization calls
--
http://phabricator.dev/oauthserver/auth/?client_id=X&state=test&redirect_uri=http://www.evil.com
--- verified error'd from mismatching redirect uri's
--- verified state parameter in response
--- verified did not redirect to client redirect uri
-- http://phabricator.dev/oauthserver/auth/?client_id=X w/ existing
authorization
--- got redirected to proper client url with error that response_type not
specified
-- http://phabricator.dev/oauthserver/auth/?client_id=X&response_type=code w/
existing authorization
--- got redirected to proper client url with pertinent code!
- tried a few important access calls
-- verified appropriate errors if missing any required parameters
-- verified good access code with appropriate other variables resulted in an
access token
- verified that if redirect_uri set correctly in authorization required for
access and errors if differs at all / only succeeds if exactly the same
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley, ajtrichards
Maniphest Tasks: T889, T906, T897
Differential Revision: https://secure.phabricator.com/D1727
Summary:
- Add a proper mailKey field to make these things mailable. Backfill all
existing objects.
- Denormalize authorPHID to the commit object so we can query by it
efficiently in a future diff. We currently use the search engine to drive
"commits by author" but that's not so good for audit, which needs more
constraints.
- Add an overall audit status field so we can efficiently query "commits that
needs your attention".
- Add enough code to convince myself that these fields are basically
reasonable and work correctly.
Test Plan:
- Ran schema upgrades. Checked database state afterward.
- Ran "reparse.php --owners --herald" to verify worker changes.
- Looked at a commit, altered aggregate status via audits / reparse.php,
verified it responded correctly.
Reviewers: btrahan, jungejason
Reviewed By: jungejason
CC: aran, epriestley, nh
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1706
Summary:
beyond the title, this diff tweaks the test console to have a bit more
functionality. also makes a small change to CSS for AphrontFormControlMarkup,
which IMO fixes a display issue on
https://secure.phabricator.com/settings/page/profile/ where the Profile URI is
all up in the air and whatnot
I think this is missing pagination. I am getting tired of the size though and
will add later. See T905.
Test Plan:
viewed, updated and deleted client authorizations. viewed, created,
updated and deleted clients
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Maniphest Tasks: T849, T850, T848
Differential Revision: https://secure.phabricator.com/D1683
Summary:
Added "What's new?" to the ircbot
====Matches
```What is new?
What's new?
Whats new```
Test Plan:
<`Korvin> what is new?
<korvinbot-local> Derpen created D1: Herped the derp - http://phabricator.net/D1
It shows five.
Reviewers: epriestley
Reviewed By: epriestley
CC: epriestley, aran
Differential Revision: https://secure.phabricator.com/D1666
for scope
Summary:
this patch makes the access token response "complete" relative to spec by
returning when it expires AND that the token_type is in fact 'Bearer'.
This patch also lays the groundwork for scope by fixing the underlying data
model and adding the first scope checks for "offline_access" relative to expires
and the "whoami" method. Further, conduit is augmented to open up individual
methods for access via OAuth generally to enable "whoami" access. There's also
a tidy little scope class to keep track of all the various scopes we plan to
have as well as strings for display (T849 - work undone)
Somewhat of a hack but Conduit methods by default have SCOPE_NOT_ACCESSIBLE. We
then don't even bother with the OAuth stuff within conduit if we're not supposed
to be accessing the method via Conduit. Felt relatively clean to me in terms
of additional code complexity, etc.
Next up ends up being T848 (scope in OAuth) and T849 (let user's authorize
clients for specific scopes which kinds of needs T850). There's also a bunch of
work that needs to be done to return the appropriate, well-formatted error
codes. All in due time...!
Test Plan:
verified that an access_token with no scope doesn't let me see
anything anymore. :( verified that access_tokens made awhile ago expire. :(
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Maniphest Tasks: T888, T848
Differential Revision: https://secure.phabricator.com/D1657
Summary:
adds a Phabricator OAuth server, which has three big commands:
- auth - allows $user to authorize a given client or application. if $user has already authorized, it hands an authoization code back to $redirect_uri
- token - given a valid authorization code, this command returns an authorization token
- whoami - Conduit.whoami, all nice and purdy relative to the oauth server.
Also has a "test" handler, which I used to create some test data. T850 will
delete this as it adds the ability to create this data in the Phabricator
product.
This diff also adds the corresponding client in Phabricator for the Phabricator
OAuth Server. (Note that clients are known as "providers" in the Phabricator
codebase but client makes more sense relative to the server nomenclature)
Also, related to make this work well
- clean up the diagnostics page by variabilizing the provider-specific
information and extending the provider classes as appropriate.
- augment Conduit.whoami for more full-featured OAuth support, at least where
the Phabricator client is concerned
What's missing here... See T844, T848, T849, T850, and T852.
Test Plan:
- created a dummy client via the test handler. setup development.conf to have
have proper variables for this dummy client. went through authorization and
de-authorization flows
- viewed the diagnostics page for all known oauth providers and saw
provider-specific debugging information
Reviewers: epriestley
CC: aran, epriestley
Maniphest Tasks: T44, T797
Differential Revision: https://secure.phabricator.com/D1595
Summary:
This is pretty simple and unpolished, but it's getting pretty big and it seems
like a reasonable starting point.
- Log chat in various "channels".
- Conduit record and query methods.
- IRCBot integration for IRC logging
Major TODO:
- Web UI is really unpolished and has no search, paging, anchor-linking, etc.
Basically all presentation stuff, though.
- I think the bot should have a map of channels to log with channel aliases?
- The "channels" should probably be in a separate table.
- The "authors" should probably be correlated to Phabricator accounts somehow,
where possible.
Test Plan: Used phabotlocal to log #phabricator.
Reviewers: kdeggelman, btrahan, Koolvin
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T837
Differential Revision: https://secure.phabricator.com/D1625
Summary: See patch comment, which explains the situation.
Test Plan: Ran upgrade, verified mimeType field is \n-free in database.
Reviewers: davidreuss, btrahan
Reviewed By: davidreuss
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1624
Summary:
I accidentally added two "104" patches. This actually works OK for the most part
but is fundamentally bad and wrong.
Merge the patches (installs applied both as "104", so we can't move one to
"105") and add a safeguard.
Test Plan: Ran upgrade_schema.php with two "104" patches, got error'd. Ran
without, got successs.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1614
Summary:
This was a sort of speculative feature added by a contributor some time ago and
just serves as a label; for now, simplify it into "active" and "archived" and
remove "archived" projects from the "active" list.
- Fix a bug where we'd publish a "renamed from X to X" transaction that had no
effect.
- Publish stories about status changes.
- Remove the "edit affiliation" controller, which has no links in the UI
(effectively replaced by join/leave links).
- Add query/conduit support.
Test Plan: Edited the status of several projects.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T681
Differential Revision: https://secure.phabricator.com/D1573
Summary:
We save search information and then redirect to a "/search/<query_id>/" URI in
order to make search URIs short and bookmarkable, and save query data for
analysis/improvement of search results.
Currently, there's a vague object enumeration security issue with using
sequential IDs to identify searches, where non-admins can see searches other
users have performed. This isn't really too concerning but we lose nothing by
using random keys from a large ID space instead.
- Drop 'authorPHID', which was unused anyway, so searches can not be
personally identified, even by admins.
- Identify searches by random hash keys, not sequential IDs.
- Map old queries' keys to their IDs so we don't break any existing bookmarked
URIs.
Test Plan: Ran several searches, got redirected to URIs with random hashes from
a large ID space rather than sequential integers.
Reviewers: arice, btrahan
Reviewed By: arice
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1587
Summary:
Add a very basic edit history table to herald rules. This table is updated
whenever saving a herald rule. The contents of the save are not examined, and
the edit history contains no information about the rule itself *yet*. Edit
history can be viewed by anyone through /herald/history/<rule id>/.
Task ID: #
Blame Rev:
Test Plan:
Made a test rule, saved some stuff.
Revert Plan:
Tags:
Reviewers: epriestley, jungejason
Reviewed By: epriestley
CC: zizzy, aran, xela, epriestley
Differential Revision: https://secure.phabricator.com/D1387
Summary:
- Only write the <ruleID, phid> row if the rule is a one-time rule.
- Delete all the rows for rules which aren't one-time.
NOTE: This is probably like several million rows for Facebook and could take a
while.
Test Plan:
Added some one-time and every-time rules, ran them against objects, verified
only relevant rows were inserted.
Ran upgrade script against a database with one-time and every-time "ruleapplied"
rows, got the irrelevant rows removed.
Reviewers: nh, btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1484
Summary:
Herald rules may be marked as "one-time". We track this by writing a row with
<ruleID, phid> when we apply a rule.
However, the current test for rule application involves loading every <ruleID,
*> pair. We also always write this row even for rules which are not one-time, so
if there are 100 rules, we'll load 1,000,000 rows after processing 10,000
objects.
Instead, load only the <phid, *> pairs, which are guaranteed to be bounded to at
most the number of rules.
I'll follow up with a diff that causes us to write rows only for one-time rules,
and deletes all historic rows which are not associated with one-time rules.
Test Plan:
Grepped for callsites to loadAllByContentTypeWithFullData(). Ran
rules in test console.
Reviewers: nh, btrahan, jungejason
Reviewed By: nh
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1483
Summary:
- Make some editing operations transaction-oriented, like Maniphest. (This
seems to be a good model, particularly for extensibility.) I'll move the rest of
the editing operations to transactions in future diffs.
- Make transaction-oriented operations publish feed stories.
Test Plan:
- Created a new project.
- Edited an existing project.
- Created a new project via quick create flow from Maniphest.
- Verified feed stories publish correctly.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T681
Differential Revision: https://secure.phabricator.com/D1477
Summary:
Rough cut of Drydock. This is very basic and doesn't do much of use yet (it
//does// allocate EC2 machines as host resources and expose interfaces to them),
but I think the overall structure is more or less reasonable.
== Interfaces
Vision: Applications interact with Drydock resources through DrydockInterfaces,
like **command**, **filesystem** and **httpd** interfaces. Each interface allows
applications to perform some kind of operation on the resource, like executing
commands, reading/writing files, or configuring a web server. Interfaces have a
concrete, specific API:
// Filesystem Interface
$fs = $lease->getInterface('filesystem'); // Constants, some day?
$fs->writeFile('index.html', 'hello world!');
// Command Interface
$cmd = $lease->getInterface('command');
echo $cmd->execx('uptime');
// HTTPD Interface
$httpd = $lease->getInterface('httpd');
$httpd->restart();
Interfaces are mostly just stock, although installs might add new interfaces if
they expose different ways to interact with resources (for instance, a resource
might want to expose a new 'MongoDB' interface or whatever).
Currently: We have like part of a command interface.
== Leases
Vision: Leases keep track of which resources are in use, and what they're being
used for. They allow us to know when we need to allocate more resources (too
many sandcastles on the existing hosts, e.g.) and when we can release resources
(because they are no longer being used). They also give applications something
to hold while resources are being allocated.
// EXAMPLE: How this should work some day.
$allocator = new DrydockAllocator();
$allocator->setResourceType('sandcastle');
$allocator->setAttributes(
array(
'diffID' => $diff->getID(),
));
$lease = $allocator->allocate();
$diff->setSandcastleLeaseID($lease->getID());
// ...
if ($lease->getStatus() == DrydockLeaseStatus::STATUS_ACTIVE) {
$sandcastle_link = $lease->getInterface('httpd')->getURI('/');
} else {
$sandcastle_link = 'Still building your sandcastle...';
}
echo "Sandcastle for this diff: ".$sandcastle_link;
// EXAMPLE: How this actually works now.
$allocator = new DrydockAllocator();
$allocator->setResourceType('host');
// NOTE: Allocation is currently synchronous but will be task-driven soon.
$lease = $allocator->allocate();
Leases are completely stock, installs will not define new lease types.
Currently: Leases exist and work but are very very basic.
== Resources
Vision: Resources represent some actual thing we've put somewhere, whether it's
a host, a block of storage, a webroot, or whatever else. Applications interact
through resources by acquiring leases to them, and then getting interfaces
through these leases. The lease acquisition process has a side effect of
allocating new resources if a lease can't be acquired on existing resources
(e.g., the application wants storage but all storage resources are full) and
things are configured to autoscale.
Resources may themselves acquire leases in order to allocate. For instance, a
storage resource might first acquire a lease to a host resource. A 'test
scaffold' resource might lease a storage resource and a mysql resource.
Not all resources are auto-allocate: the entry-level version of Drydock is that
you manually allocate a couple boxes and configure them through the web console.
Then, e.g., 'storage' / 'webroot' resources allocate on top of them, but the
host pool itself does not autoscale.
Resources are completely stock, they are abstract shells representing any
arbitrary thing.
Currently: Resource exist ('host' only) but are very very basic.
== Blueprints
Vision: Blueprints contain instructions for building interfaces to, (possibly)
allocating, updating, managing, and destroying a specific type of resource in a
specific location. One way to think of them is that they are scripts for
creating and deleting resources. For example, the LocalHost, RemoteHost and
EC2Host blueprints can all manage 'host' resources.
Eventually, we will support more types of resources (storage, webroot,
sandcastle, test scaffold, phacility deployment) and more providers for resource
types, some of which will be in the Phabricator mainline and some of which will
be custom.
Blueprints are very custom and specific to application types, so installs will
define new blueprints if they are making significant use of Drydock.
Currently: They exist but have few capabilities. The stock blueprints do nearly
nothing useful. There is a technically functional blueprint for host allocation
in EC2.
== Allocator
This is just the actual code to execute the lease acquisition process.
Test Plan: Ran "drydock_control.php" script, it allocated a machine in EC2,
acquired a lease on it, interfaced with it, and then released the lease. Ran it
again, got a fresh lease on the existing resource.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D1454
Summary:
A personal rule only has actions targeting the owner. Likewise, only they can
edit the rule. OTOH, a global may affect any target and is editable by anyone.
There are no new action types. Instead, type of the rule modifies the available
targets and the messaging in the ui. This is beneficial because herald rule
adapters don't need to be aware of the difference between emailing the owner of
a personal rule and emailing an arbitrary user.
This diff sets up the logic and ui for creating personal/global rules. All
existing rules have been defaulted to global.
TODO: Filter all existing rules into personal/global
TODO: Create a UI for surfacing (relevant?) global rules.
Test Plan:
1. Created a personal rule to email myself. Created a dumby revision satisfying
the conditions of that rule. Verified that I recieved a herald email.
2. Removed my adminship, change the owner of a personal rule. verified that I
couldn't edit the rule.
3.Changed rule type to global. verified that I could edit the rule.
4. Verified that admins can edit both global and personal rules.
Reviewers: epriestley, jungejason
Reviewed By: epriestley
CC: aran, zizzy
Differential Revision: https://secure.phabricator.com/D1449
Summary: There are lots of callsites to $changeset->getFilename() so it seemed
easier to rename getFileName() to getFilename() even if it includes database
change. Plus I think that getFilename() is better.
Test Plan:
Alter database.
Open revision.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D1437
Summary: /xhprof/ doesn't exist at all, /mail/ is only for admins
Test Plan: Display directory
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley, vrana
Differential Revision: https://secure.phabricator.com/D1405
databases
Summary: This is a stopgap patch until we fix T345/T327 properly, but you can't
add a 512-character key to a UTF-8 column because it creates an index on more
than 767 bytes, which is the key length limit.
Test Plan: Ran schmea upgrade script.
Reviewers: indiefan, btrahan, jungejason
Reviewed By: jungejason
CC: aran, epriestley, xela, jungejason
Maniphest Tasks: T327
Differential Revision: https://secure.phabricator.com/D1391
Summary: Simple notificaiton handler that reads the difx event timeline and
posts notifications to IRC.
Test Plan: Ran it in #phabricator.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, btrahan
Differential Revision: https://secure.phabricator.com/D1337
Summary:
See T624. I originally wrote this to require an explicit remote, but this
creates an ugly "origin:" in all the URIs and makes T270 more difficult.
Treat all branch names as implying 'origin/'.
Test Plan:
- Pulled and imported a fresh copy of libphutil without issues.
- Browsed various git repositories.
- Browsed Javelin's various branches.
- Ran upgrade script, got a bunch of clean 'origin/master' -> 'master'
conversions.
- Tried to specify an explicit remote in a default branch name.
- Unit tests.
Reviewers: nh, jungejason, btrahan
Reviewed By: btrahan
CC: aran, btrahan
Maniphest Tasks: T624
Differential Revision: https://secure.phabricator.com/D1269
Summary:
Sometimes the SQL account may not have CREATE DATABASE privileges, so try to
fail this script immediately rather than having it work halfway if the
permission is missing.
This is just a minor tweak to try to slightly improve some cases, the long term
fix is T345 but that's a good deal more work than this.
Test Plan: Visually inspected patch; trivial change.
Reviewers: jungejason, btrahan, skrul
Reviewed By: skrul
CC: aran, skrul
Differential Revision: https://secure.phabricator.com/D1287
Summary:
- These never actually did anything.
- I don't even really remember why I built them, maybe the Open Source team
was pushing for more GitHub integration or something? I really have no idea.
- Anyway, repository tailers do everything these could do (and much more).
Test Plan:
- Ran tailers off GitHub for many months without needing post-receive hooks.
- Grepped for relevant strings, couldn't find any references.
- Used "Repository" edit interface for a Git repository.
Reviewers: btrahan, jungejason
Reviewed By: jungejason
CC: aran, jungejason
Maniphest Tasks: T706
Differential Revision: https://secure.phabricator.com/D1273
Summary:
Provide tighter integration between Projects and Phriction. Partly, I have most
of a rewrite for the Projects homepage ready but it's not currently possible to
publish feed stories about a project so all the feeds are empty/boring. This
partly makes them more useful and partly just provides a tool integration point.
- When you create a project, all the wiki pages in projects/<project_name>/*
are associated with it.
- Publish updates to those pages as being related to the project so they'll
show up in project feeds.
- Show a project link on those pages.
This is very "convention over configuration" but I think it's the right
approach. We could provide some sort of, like, "@project=derp" tag to let you
associated arbitrary pages to projects later, but just letting you move pages is
probably far better.
Test Plan:
- Ran upgrade scripts against stupidly named projects ("der", " der", " der
", "der (2)", " der (2) (2)", etc). Ended up with uniquely named projects.
- Ran unit tests.
- Created /projects/ wiki documents and made sure they displayed correctly.
- Verified feed stories publish as project-related.
- Edited projects, including perfomring a name-colliding edit.
- Created projects, including performing a name-colliding create.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley, btrahan
Maniphest Tasks: T681
Differential Revision: 1231
Summary:
add basic auditing functionalities. For the related commits for a
package, we detect the following conditions which might be suspicious to the
owners of the package:
* no revision specified
* revision not found
* author not match
* reviewedby not match
* owners not involved
* commit author not recognized
The owners of the package can change the status of the audit entries by
accepting it or specify concern.
The owner can turn on/off the auditing for a package.
Test Plan:
* verified that non-owner cannot see the details of the audit and cannot modify
it
* verified that all the audit reasons can be detected
* tested dropdown filtering and package search
* verified really normal change not detected
* verified accept/concern a commit
* tested enable/disable a package for auditing
* verified one audit applies to all <commit, packages> to the packages the
auditor owns
* verified that re-parsing a commit won't have effect if there exists a
relationship for <commit, package> already
Reviewers: epriestley, nh
Reviewed By: epriestley
CC: aran, benmathews, btrahan, mpodobnik, prithvi, TomL, epriestley
Differential Revision: 1242
Summary:
- Add a "delete" operation. Delete is just a special edit which removes the
page from indexes and shows a notice that the document has been deleted.
- When a user deletes all the content on a page, treat it as a delete.
- When a conduit call deletes all the content on a page, treat it as a delete.
- Add page status to Conduit.
- Add change type field to history.
- Added a couple of constants to support a future 'move' change, which would
move content from one document to another.
Test Plan:
- Verified deleted pages vanish from the document index (and restoring them
puts them back).
- Verified deleted pages show "This page has been deleted...".
- Created, edited and deleted a document via Conduit.
- Deleted pages via "delete" button.
- Deleted pages via editing content to nothing.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: skrul, aran, btrahan, epriestley
Maniphest Tasks: T680
Differential Revision: 1230
Summary:
This is a needlessly confusing/complex feature that I originally wrote sort of
speculativley. I think we can better serve what little need may exist here with
project feeds.
I'm probably going to get rid of or deemphasize "role" too and just add "Join
Project" and "Leave Project" buttons.
Test Plan: Viewed project list, project profile. Edited project profile and
affiliation.
Reviewers: btrahan, jungejason, zeeg
Reviewed By: btrahan
CC: aran, btrahan
Maniphest Tasks: T681
Differential Revision: 1228
Summary:
For each commit, find the affected packages, and provide a way to
search by package.
Test Plan:
create commits that touch and don't touch two packages, and verify
that they display correctly in all the UI pages.
Reviewers: epriestley, blair, nh, tuomaspelkonen
Reviewed By: epriestley
CC: benmathews, aran, epriestley, btrahan, jungejason, mpodobnik, prithvi
Maniphest Tasks: T83
Differential Revision: 1208
Test Plan: ran upgrade_schema.php on my local install. re-examined SQL query
"explain select * from phabricator_pastebin.pastebin_paste where authorPHID =
"PHID-USER-xee4ju2teq7mflitwfcs" ORDER BY id DESC;" on my local install and
noted fewer rows scanned, index used, etc
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: 1218
Summary:
This landed during my review drama embargo and is a generally good idea but had
some implementation issues.
@elynde reports it has been broken for some time, although it still works on
secure.phabricator.com so I'm guessing it's just taking a zillion years to run
at Facebook. It's up to more than a second for me on secure.phabricator.com:
https://secure.phabricator.com/file/view/PHID-FILE-v4ql4c66u3xnkarmrpm4/
The basic problem is that some of the data architecture around this
implementation is hard to scale. I want to pursue a similar feature eventually,
but drive it off notifications that we'll ship through real-time infrastructure
too.
I'm also trying to get rid of DifferentialRevisionListData and this simplifies
that somewhat.
Test Plan:
- Grepped for table name, table constant, query constant, and class name; no
hits.
- Applied SQL patch.
- Verified that Differential no longer shows "Updated".
Reviewers: elynde, btrahan, jungejason
Reviewed By: elynde
CC: aran, elynde
Differential Revision: 1178
Summary:
Caught a bad (8ms) query that didn't have a good key available. Add an
appropriate key.
The query in question is:
SELECT * FROM `maniphest_transaction` WHERE taskID = 262 ORDER BY id ASC;
...which is used in the task detail view.
Test Plan: Ran EXPLAIN on this query before/after upgrading, it now uses the
newly available key.
Reviewers: jungejason, nh, tuomaspelkonen, aran
Reviewed By: aran
CC: aran
Differential Revision: 1037
Summary:
See T549. Under configurations where files are served from an alternate domain
which does not have cookie credentials, we use random keys to prevent browsing,
similar to how Facebook relies on pseudorandom information in image URIs (we
could some day go farther than this and generate file sessions on the alternate
domain or something, I guess).
Currently, we generate these random keys in a roundabout manner. Instead, use a
real entropy source and store the key on the object. This reduces the number of
sha1() calls in the codebase as per T547.
Test Plan: Ran upgrade scripts, verified database was populated correctly.
Configured alternate file domain, uploaded file, verified secret generated and
worked properly. Changed secret, was given 404.
Reviewers: jungejason, benmathews, nh, tuomaspelkonen, aran
Reviewed By: aran
CC: aran, epriestley
Differential Revision: 1036
Summary: Allow configuration of a default author for bugs@ emails which don't
correspond to a known system user.
Test Plan: Configured a default author, sent some mails from nonsense addresses,
tasks were created.
Reviewers: davidreuss, jungejason, nh, tuomaspelkonen, aran
Reviewed By: aran
CC: aran, epriestley, ide
Differential Revision: 1013
Summary:
Current scripts make it hard to administer Phabricator instance while not having
direct (priviledged) access to the database. This change allows scenario where
DB administrator creates the databases for you before you run update_schema
script.
Test Plan:
Create the databases before running the update_schema script - it shouldn't
complain that the databases already exist.
Reviewers: aran, epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: 1014
Summary:
This makes symbol cross-references work in Differential. You need to do a little
legwork but I'll document that once the change has baked for a little while.
Basically:
- Projects are annotated with indexed languages, and "shared library" projects
(for example, symbols in Phabricator should be searched for in Arcanist and
libphutil).
- When we render a changeset, we check if its language is an indexed one. If
it is, we invoke the decorator Javascript.
- The Javascript takes you to a lookup page, which either gives you a list of
matching symbols (if several match) or redirects you instantly to the
definition.
Test Plan: Clicked class and function symbols in a diff, got jumped into
sensible sorts of places in Diffusion.
Reviewers: jungejason, nh, tuomaspelkonen, aran
Reviewed By: jungejason
CC: aran, jungejason
Differential Revision: 980
Summary: See T262. This creates the index on the Differential side which we need in order to execute this query efficiently on the Diffusion side.
Also renames "DiffusionGitPathIDQuery" to "DiffusionPathIDQuery", this query object has nothing to do with git.
Test Plan: Attached top-level and sub-level diffs to revisions and verified they populated the table with sensible data.
Reviewers: bmaurer, aravindn, fmoo, jungejason, nh, tuomaspelkonen, aran
CC:
Differential Revision: 931
Summary: See T315 for an extensive description of this feature. Adds the
descibed storage table.
Test Plan: Used phpsh to read/write symbol objects.
Reviewers: jungejason, nh, tuomaspelkonen, aran
Reviewed By: tuomaspelkonen
CC: aran, epriestley, tuomaspelkonen
Differential Revision: 897
Summary:
These fields use auxiliary storage now. Migrate the data and get rid of the
columns in the main table.
- This might take a little while to run, although there are <500k rows so
probably not too long.
- Maybe grab a backup of the table first, if I screwed something up this will
delete the data in these fields.
Test Plan:
- Ran migration locally.
- Browsed Differential.
- Grepped for "revertPlan" and "blameRevision".
Reviewers: jungejason, tuomaspelkonen, aran
Reviewed By: jungejason
CC: aran, jungejason, epriestley
Differential Revision: 832
Summary:
When an object is updated, record the content source for the update. This mostly
isn't terribly useful but one concrete thing I want to do with it is let admins
audit via-email replies more easily since there are a bunch of options which let
you do hyjinx if you intentionally configure them insecurely. I think having a
little more auditability around this feature is generally good. At some point
I'm going to turn this into a link admins can click to see details.
It also allows us to see how frequently different mechanisms are used, and lets
you see if someone is at their desk or on a mobile or whatever, at least
indirectly.
The "tablet" and "mobile" sources are currently unused but I figured I'd throw
them in anyway. SMS support should definitely happen at some point.
Not 100% sure about the design for this, I might change it to plain text at some
point.
Test Plan: Updated objects and saw update sources rendered.
Reviewers: jungejason, tuomaspelkonen, aran
Reviewed By: jungejason
CC: aran, epriestley, jungejason
Differential Revision: 844
Summary:
Precursor to building this out to solve T343. This is similar to the Maniphest
fields we landed recently, although I think they're dissimilar enough that it
isn't worth going crazy trying to make them share code, at least for now.
This doesn't really do anything yet, just adds a storage object and a couple of
selector/field indirection classes.
Test Plan: Ran SQL upgrade script, created an aux field.
Reviewed By: jungejason
Reviewers: jungejason, tuomaspelkonen, aran
CC: aran, jungejason
Differential Revision: 798
Summary: This has to table scan a ginormous table right now, give it a fighting
chance with a more usable key.
Test Plan:
- Launched GC daemon, no errors.
- Used test console to create a new transcript.
- Viewed some old transcripts.
- Ran EXPLAIN on the SELECT and verified it was utilizing the garbageCollected
key.
Reviewed By: jungejason
Reviewers: jungejason, tuomaspelkonen, aran
CC: aran, epriestley, jungejason
Differential Revision: 735
Test Plan: Look at a task detail. Some dummy attributes are automatically added in ManiphestTaskDetailController.
Reviewed By: epriestley
Differential Revision: 730
Summary:
It makes more sense to just make this a settings panel rather than a standalone
app, particularly since setting panels are relatively well separated now.
Also default-disabled the SSH Keys interface since it won't currently be useful
for most installs.
Test Plan: Edited preferences.
Reviewed By: jungejason
Reviewers: tuomaspelkonen, jungejason, aran
CC: aran, jungejason
Differential Revision: 716
Summary:
Add a new column to PhrictionContent called 'comment' or 'description' or
something
Add an optional field to the Phriction document editing interface that
allows you to add a comment
Test Plan:
Run the sql patch to modify phriction_content table
Create a new wiki page in Phriction
Type in words in description field and save the page
Visit this page and click "Edit Page" button
The content in the desciption field is saved
Reviewed By: epriestley
Reviewers: epriestley, hsb, codeblock
Commenters: codeblock
CC: aran, codeblock, hwang, epriestley
Differential Revision: 709
Summary:
With the sshd-vcs thing I hacked together, this will enable Phabricator to host
repositories without requiring users to have SSH accounts.
I also fixed "subporjects" and added an explicit ENGINE to it.
Test Plan: Created, edited and deleted public keys. Attempted to add the same
public key twice. Attempted to add invalid and unnamed public keys.
Reviewed By: aran
Reviewers: jungejason, tuomaspelkonen, aran, cadamo, codeblock
CC: aran, epriestley
Differential Revision: 711
Summary:
Quite basic subproject attachment.
Test Plan:
Go to some proj
ect and add another as a subproject.
Play around the ui.
Reviewers: epr
iestley
CC:
Summary:
Added a 'parent' field which stores a PHID of another paste. If it is not NULL show a list of children pastes on view.
Also did some misc. refactoring to clean up the code a bit, specifically in the Create controller.
Test Plan:
- Checked old pastes, they were not affected.
- Added a paste, successfully.
- Forked it, successfully.
- Went to the original paste, saw the child paste listed.
- Forked it again, saw the new one added to the list.
Reviewers:
epriestley
CC:
Differential Revision: 672
Summary:
A few minor things:
- Add Phriction to the homepage.
- Link to remarkup reference on the edit screen.
- Add a help tab with a super basic help document.
Test Plan: Cursory inspection.
Reviewed By: codeblock
Reviewers: hsb, codeblock, jungejason, tuomaspelkonen, aran
CC: aran, epriestley, codeblock
Differential Revision: 655
Summary:
This is another chunk of D636, I just simplified it a bit and added slugs.
When you go to a page like /w/pokemon/, it allows you to create or edit the
page.
Title vs slug stuff is a little funky but I think mostly-reasonable.
Test Plan: Created and edited /w/, /w/pokemon/, etc.
Reviewed By: hsb
Reviewers: hsb, codeblock, jungejason, aran, tuomaspelkonen
CC: aran, hsb
Differential Revision: 643
Summary:
Basically a copy/paste of parts of D636, but with two changes:
- Fully separate the index table ("document") from the content table
("content"). I think this will be a cleaner solution in the long run.
- Build slugs into the document structure.
This doesn't do anything useful, it just normalizes slugs and lays some
groundwork.
Test Plan:
- Visited various /w/ pages and saw them normalize correctly.
- Verified the DAO works by inserting dummy rows.
Reviewed By: codeblock
Reviewers: hsb, codeblock, jungejason, aran, tuomaspelkonen
CC: aran, codeblock, epriestley
Differential Revision: 638
Summary:
A bunch of the .sql patch files don't explicitly specify the table engine, but
we should always use InnoDB with the exception of one table which needs MyISAM
for FULLTEXT.
MySQL doesn't no-op an ALTER TABLE statment that changes the engine back to
itself and converting large tables can be time consuming, so convert only the
required tables.
Test Plan: Ran on secure.phabricator.com and my local box, it fixed all the
issues in about 3 seconds on secure.phabricator.com and <<1 second on my local.
Reviewed By: codeblock
Reviewers: codeblock, tuomaspelkonen, jungejason, aran
CC: aran, epriestley, codeblock
Differential Revision: 641
Summary:
Add the differential parse cache to the GC. This is the largest object in the
system by a wide margin, I think.
This table is potentially gigantic which is why the script truncates it before
doing a schema change.
Test Plan: Ran the GC daemon, it cleaned up some parse caches.
Reviewed By: jungejason
Reviewers: tuomaspelkonen, jungejason, aran
Commenters: tuomaspelkonen
CC: aran, jungejason, tuomaspelkonen, epriestley
Differential Revision: 620
Summary: Port slowvote. This has some style/layout roughness but gets us most of
the way there. I'll followup to fix some of the markup issues.
Test Plan: Created and voted in several different kinds of poll.
Reviewed By: codeblock
Reviewers: codeblock, tomo, jungejason, aran, tuomaspelkonen
Commenters: aran, jungejason
CC: aran, codeblock, jungejason, epriestley
Differential Revision: 613
Summary:
- have files be uploaded by drag+drop instead of browse.
- Files are named by their uploaded filename, the user isn't given a chance to enter a file name. Is this bad?
- Store author PHID now with files
- Allow an ?author=<username> to limit the /files/ list by author.
- If one file is uploaded, the user is taken to its info page.
- If several are uploaded, they are taken to a list of their files.
Test Plan:
- Quickly tested everything and it still worked, I'd recommend some people try this out before it gets committed though. It's a rather huge revision.
Reviewers:
epriestley, Ttech
CC:
Differential Revision: 612
Summary:
People want to see all the tasks they have subscribed to in one
view. A new table was added for this to make queries faster.
Test Plan:
Tested that the view was initially empty. After running the
reindex_maniphest.php script, I saw the correct tasks there. Added
myself as a subscriber to one task and made sure the view was
updated. Removed myself as a subscriber from one task and made sure
the view was updated again.
Reviewed By: epriestley
Reviewers: epriestley, jungejason, codeblock
CC: aran, rm, epriestley
Differential Revision: 603
Summary: This defines an extremely basic version of an activity feed, like
Facebook's news feed. It doesn't do much of interest yet.
Test Plan: Published some feed stories:
https://secure.phabricator.com/file/view/PHID-FILE-5061aa72105bbdc05b21/
Reviewed By: tuomaspelkonen
Reviewers: jungejason, tuomaspelkonen, aran
Commenters: codeblock, jungejason
CC: aran, epriestley, codeblock, tuomaspelkonen, jungejason
Differential Revision: 593
Summary:
- Add a default list of supported languages to default.conf.php
and make the initial/default value customizable.
- Store a '' in the database to infer the language from the filename/title.
Test Plan:
Tested in my sandbox with pygments enabled and disabled and various
combinations of filename/extension/dropdown selection.
Reviewers:
epriestley
CC:
Differential Revision: 587
Summary:
Major things taking place here:
- A new table for storing <task, project> relationships.
- Moved all task query logic into a dedicated class.
- Added a "projects" filter to the UI.
I was originally going to try to drive this off the main search index but the
perf benefits of a custom schema make an overwhelming argument in favor of doing
it this way.
Test Plan:
Filtered tasks by author and owner and zero, one, and more than one project.
Exercised all the group/sort options. Ran the index script over my 100k task
corpus. Edited task-project membership and verified the index updated.
Reviewed By: cadamo
Reviewers: gc3, jungejason, cadamo, tuomaspelkonen, aran
CC: aran, cadamo, epriestley
Differential Revision: 556
Summary:
Maniphest is missing some keys and some query strategy which will make it
cumbersome to manage more than a few tens of thousands of tasks.
Test Plan:
Handily manipulated 100k-scale task groups. Maniphest takes about 250ms to
select and render pages of 1,000 tasks and has no problem paging and filtering
them, etc. We should be good to scale to multiple millions of tasks with these
changes.
Reviewed By: gc3
Reviewers: fratrik, jungejason, aran, tuomaspelkonen, gc3
Commenters: jungejason
CC: anjali, aran, epriestley, gc3, jungejason
Differential Revision: 534
images correctly
Summary:
This is sort of doing two things at once:
- Add an "isOwner" flag to Project Affiliation to lay the groundwork for T237.
- Rename the "QuickCreate" workflow to "Create" and funnel all creation
through it.
- Reorganize the image transformation stuff and use it to correctly
crop/resize uploaded images.
Test Plan:
Created and edited projects and affailiations. Uploaded project, user, and
profile photos. Verified existing thumbnailing in Maniphest still works
properly.
Reviewed By: cadamo
Reviewers: cadamo, aran, jungejason, tuomaspelkonen
CC: aran, epriestley, cadamo
Differential Revision: 529
Summary:
Include the object name handler by default, to allow for things like Dxxx working out of the box.
Test Plan:
Added the line, and had a "working" bot (sending D1 to the channel returned a valid response)
Reviewers:
epriestley
CC:
Differential Revision: 537
Summary:
D477 added functionality to the project list view but had a couple of
performance issues that I missed in review, because it took the query count for
the page from around 3 to as many as 300, including up to 100 heavyweight search
index queries.
This fixes the two simple N+1 query problems. This general pattern of data
access often occurs:
COUNTEREXAMPLE
$cats = load_cats();
foreach ($cats as $cat) {
$cats_hats = load_hats_for_cat($cat);
// ...
}
But this issues "N+1" queries, i.e. if you load 100 cats you issue 101 queries.
It is faster to group the queries instead:
$cats = load_cats();
$hats = load_all_hats_for_these_cats($cats);
foreach ($cats as $cat) {
$cats_hats = $hats[$cat->getID()];
}
MySQL can execute one query which returns all the results much faster than 100
queries which return one result, especially if the database is not local (i.e.,
over the network).
However, this doesn't save a ton of time. The bigger issue is that I didn't have
the right keys on the relationship tables in the search engine. This adds them,
and reduces the search engine lookup cost from 25-80ms (for
secure.phabricator.com) down to 1-3ms.
I still probably want to get this out of the loop at some point but it's okay
for now and the page loads in a few ms rather than taking more than a second.
Test Plan:
Used "services" tab, "xhprof" and "EXPLAIN" to analyze page performance. I
measured these changes:
- Query count: 1 + (3 * N projects) -> 3 + (N projects) (e.g., 301 -> 103)
- Total time spent querying, ignoring search indexes: 40ms (local.aprhont.com)
-> 20ms (local.aphront.com)
- Cost for search index query: 25-80ms (secure.phabricator.com) -> 1-3ms
Reviewed By: cadamo
Reviewers: cadamo, aran, jungejason, tuomaspelkonen
CC: aran, cadamo, epriestley
Differential Revision: 485
Summary:
Without this, user creation throws an exception when trying to insert NULL into
a non-NULL field.
Test Plan:
Created a new user.
Reviewed By: fratrik
Reviewers: fratrik, toulouse, aran, jungejason, tuomaspelkonen
CC: aran, fratrik
Differential Revision: 480
Summary: Added some change on the project's list view, to show information about
active tasks, population, etc. Also modified the "profile view", and added a class "PhabricatorProfileView" to render the profile, both on projects and users.
Test Plan: play around the project directory :)
Reviewers: epriestley ericfrenkiel
CC:
Differential Revision: 477
Summary:
Provides a new workflow for making it non-horrible to install certificates.
Basically you run "arc install-certificate" and then copy/paste a short token
off a webpage and it does the ~/.arcrc edits for you.
Test Plan:
Installed certificates, used bad tokens, hit rate limiting.
Reviewed By: aran
Reviewers: aran, jungejason, tuomaspelkonen
CC: aran
Differential Revision: 460
Summary:
Allows user-configurable timezones. Adds a preference panel, and migrates to the
new date rendering in easily-modified areas of the code. ***In progress***.
Test Plan:
Check database to make sure the field is being changed when the settings are
changed; check affected views to see how they render times.
Reviewed By: epriestley
Reviewers: epriestley
CC: aran, epriestley, toulouse
Differential Revision: 475
Summary:
A few tweaks to hsb's Countdown implementation:
- Allow the page to be rendered "chromeless", suitable for display on one of
the dozens of monitors everyone has laying around.
- Show title of countdown in deletion dialog.
- When creating a new countdown default to time(), not Dec 31, 1969.
- Add extra "/" after editing to avoid needless redirect.
- Tweak some page titles.
- Show countdown author in list view.
- Highlight tab in list view.
- Tweak menu copy.
- Link countdown title in list view, separate buttons into different columns
so they pick up padding.
Test Plan:
Created, edited and deleted a timer. Viewed a timer and toggled chrome mode.
Viewed timer list.
Reviewed By: hsb
Reviewers: hsb, aran, jungejason, tuomaspelkonen
CC: aran, hsb, epriestley
Differential Revision: 454
Summary:
Addon that allows you to create a live countdown page to
some event.
Here is the ticket that this code is based on
https://secure.phabricator.com/T36
Test Plan:
Tested by manually setting dates in the timer.js file and
checking if they made sense.
I'm not sure if it works across different timezones though.
Reviewers: epriestley
CC:
Differential Revision: 436
Summary:
This is Paste. It needs some work, but epriestley recommended that I just commit something that works, and expand on that later.
Specifically, it lacks the ability to view a raw paste right now, and to turn off line numbers, making it hard to copy/paste from for now. It works for showing other people code, however.
Test Plan:
Pasted stuff, and was able to view it, and see it in the list on /paste/. Put a file extension in the title, and saw that syntax highlighting worked as expected.
Reviewers:
epriestley
CC:
Differential Revision: 424
reviewers as metadata
Summary:
The "Add reviewer" implementation is super lazy right now since I didn't want to
do a schema change. Man up and add a column. I also plan to store "via"
information here (e.g., via email or via mobile).
NOTE: This schema change may take a while since the comment table is pretty big
in Facebook's install.
This needs a little CSS work but I think it's reasonable for now.
Test Plan:
Made comments on revisions and tasks. Added reviewers to a revision, got linked
names instead of a blob of text.
Reviewed By: aran
Reviewers: tomo, jungejason, tuomaspelkonen, aran
Commenters: tomo
CC: aran, tomo, epriestley
Differential Revision: 394
Summary:
- added a new config class for representing the kind of repetition a rule has
(once, every time, first time only)
- added an email action to herald rules for differential to allow someone to get
an email but only the first one
- changed the herald rule ui to allow a user to pick the amount of repetition
Test Plan:
created a test rule and ran it over and over
Reviewed By: epriestley
Reviewers: epriestley, tuomaspelkonen
CC: aran, epriestley, gc3
Revert Plan:
Tags:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Differential Revision: 357
Summary:
This is still very rough but provides basic support for generating image
thumbnails. I need to separate stuff out a bit but I'm going to integrate into
Maniphest before I hit the profile stuff so this seems like a reasonable
starting point.
Test Plan:
Generated some image thumbnails in various sizes.
Reviewed By: aran
Reviewers: jungejason, tuomaspelkonen, aran
CC: aran
Differential Revision: 333
Summary: This isn't complete, but I figured I'd ship it for review while it's still smallish.
Provide an activity log for high-level system actions (logins, admin actions). This basically allows two things to happen:
- The log itself is useful if there are shenanigans.
- Password login can check it and start CAPTCHA'ing users after a few failed attempts.
I'm going to change how the admin stuff works a little bit too, since right now you can make someone an agent, grab their certificate, revert them back to a normal user, and then act on their behalf over Conduit. This is a little silly, I'm going to move "agent" to the create workflow instead. I'll also add a confirm/email step to the administrative password reset flow.
Test Plan: Took various administrative and non-administrative actions, they appeared in the logs. Filtered the logs in a bunch of different ways.
Reviewers: jungejason, tuomaspelkonen, aran
CC:
Differential Revision: 302
Summary:
Allow construction of handlers which use Conduit.
Test Plan:
Made a bot that connects to local and runs conduit.ping.
Reviewed By: mroch
Reviewers: mroch, codeblock, aran, jungejason, tuomaspelkonen
CC: aran, mroch
Differential Revision: 299
Summary:
This is sort of a silly/fun project but I think there's some utility. For
example, mroch added some handlers to an eggdrop or something similar to look
for "D12345" and print out the title/link, which was actually pretty useful.
We could also add logging here and subsume the more-or-less unowned Facebook
tool that does the same thing, especially since we can get a bunch of good stuff
it doesn't support (like search) more or less for free.
This is also an easy way to provide some example code for writing Conduit system
agents.
This is a minimal implementation which creates a bot that connects to a
hard-coded server and sits there indefinitely. Next steps:
- Add conduit/sysagent support
- Write differential/maniphest/diffusion handlers
- Move configuration to the web interface (?) and integrate with phd
- Write a logging handler?
Test Plan:
Ran bot with "exec_daemon.php", it connected to the hard-coded server and sat
there indefinitely.
Reviewed By: aran
Reviewers: codeblock, mroch, tuomaspelkonen, aran, jungejason
CC: aran, epriestley
Differential Revision: 283
Summary:
Provide an "isAdmin" flag for users, to designate administrative users.
Restore the account editing interface and allow it to set role flags and reset
passwords.
Provide an "isDisabled" flag for users and shut down all system access for them.
Test Plan:
Created "admin" and "disabled" users. Did administrative things with the admin
user. Tried to do stuff with the disabled user and was rebuffed. Tried to access
administrative interfaces with a normal non-admin user and was denied.
Reviewed By: aran
Reviewers: tuomaspelkonen, jungejason, aran
CC: ccheever, aran
Differential Revision: 278
Summary:
Alters the installation instructions to guide installers into a "setup" mode
which does config file sanity checking.
Test Plan:
Put myself in setup mode, simulated all the failures it detects, took myself out
of setup mode, Phabricator works OK.
Reviewed By: tuomaspelkonen
Reviewers: jungejason, tuomaspelkonen, aran
CC: aran, tuomaspelkonen, epriestley
Differential Revision: 230
Summary:
Provides support for per-user x per-object unique reply-to email addresses, plus
SMTP integration.
This does not actually make Phabricator use these in outbound email.
Test Plan:
Used test console to validate in-Phabricator routing and handling.
Piped emails into the "mail_handler.php" script to validate mail parsing.
Configured sendmail and sent mail to Phabricator.
Technically I haven't conducted all parts of this test on the same machine since
I lost the will to configure more SMTP servers after configuring phabricator.com
Reviewed By: jungejason
Reviewers: jungejason, tuomaspelkonen, aran
CC: aran, epriestley, jungejason
Differential Revision: 226
Summary:
Previously, Remarkup allowed you to paste in an image URI and get an inline
image. However, it did this by hotlinking the image which isn't so hot in an
open source product.
Restore this feature, but use image proxying instead. The existing image macro
code does most of the work.
There is a mild security risk depending on the network setup so I've left this
default-disabled and made a note about it. It should be safe to enable for
Facebook.
Test Plan:
Pasted in image and non-image links, got reasonable behavior. Verified proxying
appears to work. Verified that file:// shenanigans produce 400.
Reviewed By: tuomaspelkonen
Reviewers: aran, jungejason, tuomaspelkonen
Commenters: cpiro
CC: aran, cpiro, tuomaspelkonen
Differential Revision: 214
Summary:
Moved this to the "phabricator-www" project.
Test Plan:
N/A
Reviewed By: scottmac
Reviewers: scottmac
CC: aran, scottmac
Differential Revision: 219
Summary:
This isn't terribly elegant but it solves the problem without loss of
generality. We can pursue a more finessed solution later if it seems prudent.
Test Plan:
Created a revision matched by a blanket herald rule, and then commented on it.
Comment email had X-Herald-Rules header in it.
Reviewed By: aran
Reviewers: aran, tuomaspelkonen, jungejason
CC: aran
Differential Revision: 218
Summary:
Some users have had problems with the database initialization process, simplify
it by creating a new "initialize.sql" dump at v34.
I also populated this dump with the right landing screen (so all the tools
actually have links) and a default avatar.
Test Plan:
Dropped all databases, initialized according to documentation, ended up in a
good state with sensible defaults.
Reviewed By: jungejason
Reviewers: aran, jungejason, tuomaspelkonen
CC: aran, jungejason
Differential Revision: 210
Summary:
Make it slightly less terrible. Make sure to use tables for layout.
Test Plan:
Looked at it.
Reviewed By: tomo
Reviewers: aran, tomo, tuomaspelkonen, jungejason
CC: aran, epriestley, tomo
Differential Revision: 196
Summary:
In a basically reasonable configuration where you connect
with a non-privileged user from the web workflow, upgrade_schema.php
won't have enough privileges. Allow the user to override the normal
auth with -u and -p.
Test Plan:
Tried to do a schema upgrade with an underprivileged user,
got a useful error message instead of garbage.
Reviewed By: Girish
Reviewers: Girish, davidrecordon, jungejason, tuomaspelkonen, aran
CC: aran, epriestley, Girish
Differential Revision: 191
Summary:
This adds a new view to differential called Updates.
The high-level goal of Updates is to enabled differential to be
effectively used without email notifications. I've tried doing things
like automatically deleting differential emails where I'm in the 'to'
line since they show up on the main diffential page but then there's
always the chance an important diff flies by without me seeing it. Also,
sometimes someone comments on a diff post-commit but differential
doesn't surface those diffs.
I re-created a test db on my devserver using mysqldump to get data on
revs > 230000 so I would have some test data. We need to add a simple
viewtime table but I didn't want to do that in production. Here's the
table:
CREATE TABLE differential_viewtime (
viewerPHID varchar(64) not null,
objectPHID varchar(64) not null,
viewTime int unsigned not null,
PRIMARY KEY (viewerPHID, objectPHID)
);
Issues:
-Once we turn this on, all diffs will be 'unviewed'. What do you think
about a 'Clear All' button or something?
-Maybe we should add a pager
This feature would be insanely useful, let me know what you think.
Test Plan:
Loaded Updates in my sandbox
http://phabricator.dev1577.snc6.facebook.com/differential/filter/updates/
Clicked a diff, then went back, made sure diff disappeared from Updates
list
Reviewed By: tuomaspelkonen
Reviewers: epriestley, jungejason, tuomaspelkonen
Commenters: epriestley
CC: epriestley, elynde, tuomaspelkonen
Differential Revision: 169
Summary: See D133. Workers can also be subject to the same race, invert the
row relationship in the same way.
Test Plan: Launched repository master daemons and some taskmasters and used
the Daemon console to veify that they were able to process tasks. Manually
checked the database to make sure data got linked correctly and that new data
was inserted correctly.
Reviewers: jungejason
CC: tuomaspelkonen
Differential Revision: 135
Summary: While I should fix the transactional stuff, that patch is going to be
tricky and transactions have some performance implications. This is a simple
fix which prevents the race.
Instead of having the data point at the event ID, have the event point at a
data ID. Insert the data first, then insert the event with the right data
pointer. This is super simple and prevents the race issue.
Test Plan:
- Ran the schema upgrade script, verified that the database was
correctly upgraded. Was also prompted to stop daemons.
- Ran 'repository-launch-master', verified that the discovery daemons were
able to discover new commits and insert events for them. Verified the
committask daemon was consuming events and converting them into tasks.
- Verified new tasks looked correct in the database.
- Browsed web interface.
Reviewers: jungejason
CC: tuomaspelkonen
Differential Revision: 133
Summary:
Added long waited image macro support for differential and others.
Test Plan:
Tried a couple of different macros and made sure they appear nicely
in the comment preview. Made sure that the normal comments are shown
correctly.
Reviewed By: epriestley
Reviewers: epriestley
CC: jungejason, tuomaspelkonen, epriestley
Differential Revision: 129
Summary:
Removed because code wasn't used or really needed.
Test Plan:
* Tested that "PHID List" and "PHID Lookup" pages work correctly.
* Tested that new PHIDs can be allocated with the predefined set of types
Reviewed By: epriestley
Reviewers: epriestley
CC: epriestley
Differential Revision: 88
Summary:
Internal tools, e.g., differential and diffusion have user defined
preferences for monospaced font and the option for showing either the
name of the tool or the glyph of the tool in the title.
These preferences were ported to phabricator. These preferences can be
modified in /preferences/ and they both affect diffusion and differential
at the moment.
Test Plan:
* Created an empty database
* Loaded /preferences/ and modified the monospaced font and clicked save
* Confirmed that the same page was loaded with the message that preferences
have been saved and that the example text used the user defined font
* in /preferences/ changed the option to show tool names as plain text and
clicked save
* Confirmed that the same page was loaded with '[Preferences]' in the title
instead of a glyph
* These same tests were also executed for differential and diffusion
Reviewers: epriestley
CC: jungejason
Differential Revision: 91
Summary: Basic scaffolding for repository tracking, plus daemon infrastructure
(Timelines, Cursors) and some fixes (memory usage, mysql_connect() junk).
Test Plan: parsed Javelin git commit history via daemon
Reviewers:
CC:
