Summary:
Ref T10405. If `gd` is not installed, a number of unit tests currently fail because they generate synthetic users and try to composite profile pictures for them.
Instead, just fall back to a static default if `gd` is not available.
Test Plan: Faked this pathway, created a new user, saw a default profile picture.
Reviewers: amckinley, lpriestley, avivey
Reviewed By: avivey
Maniphest Tasks: T10405
Differential Revision: https://secure.phabricator.com/D18812
Summary:
Ref T10233. See PHI231. When users ignore the `arc land` prompt about bad revision states, make it explicitly clear in the transaction log that they broke the rules.
You can currently figure this out by noticing that there's no "This revision is accepted and ready to land." message, but it's unrealistic to expect non-expert users to look for the //absence// of a message to indicate something, and this state change is often relevant.
Test Plan: {F5302351}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10233
Differential Revision: https://secure.phabricator.com/D18808
Summary:
Use ClassQuery to find datasources for the quick-search.
Mostly, this allows extensions to add quicksearches.
Test Plan:
using `/typeahead/class/`, tested several search terms that make sense.
Removed the tag interface from a datasource, which removed it from results.
Reviewers: epriestley, amckinley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18760
Summary:
Depends on D18801. Ref T2543. See PHI229. I missed "Accept" before, but intended to disallow it (like "Reject") since I don't want drafts to be reviewable.
However, "Resign" seems fine to allow? So let's allow that for now.
Test Plan: Was no longer offered "Accept" on draft revisions.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18802
Summary:
See PHI228. Ref T2543. The current logic gets this slightly wrong: prototypes are off, you create a draft with `--draft`, then promote it with "Request Review". This misses both branches.
Instead, test these conditions a little more broadly. We also need to store broadcast state since `getIsNewObject()` isn't good enough with this workflow.
Test Plan:
- With prototypes on and autopromotion, got a rich email after builds finished.
- With prototypes off, got a rich email immediately.
- With prototypes off and `--draft`, got a rich email after "Request Review".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18801
Summary:
See PHI173. Adds custom field support for Herald actions, and implements actions for "Datasource/Tokenizer" fields.
The only action available for now is "set field to...". Other actions ("Add values", "Remove values") might make sense in the future for these fields, but there's currently no use case. For most other field types (text, select, checkbox, etc) only "Set to" makes sense.
Test Plan:
- Added a "datasource" custom field to the custom field definition in Config.
- Added a "if field is empty, set field to default value X" rule to Herald.
- Created a task with a nonempty field: no Herald trigger.
- Created a task with an empty field: Herald fired.
- Reviewed rule and transcripts for text strings.
{F5297615}
{F5297616}
{F5297617}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18784
Summary:
Depends on D18792. Fixes T13024. Fixes T89198. Currently, when users are logging in initially (for example, need to enter MFA) we show more menu items than we should.
Notably, we may show some personalized/private account details, like the number of unread notifications (probably not relevant) or a user's saved queries (possibly sensitive). At best these are misleading (they won't work yet) and there's an outside possibility they leak a little bit of private data.
Instead, nuke everything except "Log Out" when users have partial sessions.
Test Plan:
Hit a partial session (MFA required, email verification required) and looked at the menu. Only saw "Log Out".
{F5297713}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024
Differential Revision: https://secure.phabricator.com/D18793
Summary: Depends on D18791. Ref T13024. This clears up another initialization order issue, where an unverified address could prevent MFA enrollment.
Test Plan: Configured both verification required and MFA required, clicked "Add Factor", got a dialog for the workflow.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024
Differential Revision: https://secure.phabricator.com/D18792
Summary:
Depends on D18790. Ref T13024. Fixes T8335. Currently, "unapproved" and "disabled" users are bundled together. This prevents users from completing some registration steps (verification, legalpad documents, MFA enrollment) before approval.
Separate approval out and move it to the end so users can do all the required enrollment stuff on their end before we roadblock them.
Test Plan: Required approval, email verification, signatures, and MFA. Registered an account. Verified email, signed documents, enrolled in MFA, and then got prompted to wait for approval.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024, T8335
Differential Revision: https://secure.phabricator.com/D18791
Summary:
Depends on D18789. Ref T13024. See PHI223. Currently, if `security.require-multi-factor-auth` and Legalpad "Signature Required" documents are //both// set, it's not possible to survive account registration, since MFA is requiried to sign and signatures are required to add MFA.
Instead, check for signatures before requiring MFA enrollment. This makes logical sense, since it's silly to add MFA if you don't agree to a Terms of Service or whatever.
(Note that if you already have MFA, we prompt for that first, before either of these steps, which also makes sense.)
Test Plan: Configured `security.require-multi-factor-auth`. Added a signature-required document. Loaded a page as a new user. Went through signature workflow, then through the MFA enrollment workflow.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024
Differential Revision: https://secure.phabricator.com/D18790
Summary: Depends on D18788. Ref T13024. Currently, we prompt users to sign from newest to oldest. This seems less intuitive than oldest to newest.
Test Plan: Dumped document order, saw it swap to oldest-first.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024
Differential Revision: https://secure.phabricator.com/D18789
Summary: Depends on D18786. Ref T13024. I'm going to change the order this occurs in, but move it to a separate method and clean it up a little first.
Test Plan: Added a new document as required, reloaded, signed it, got logged into a session.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024
Differential Revision: https://secure.phabricator.com/D18788
Summary: Depends on D18785. Ref T13024. While I'm in here, update this a bit to use the newer stuff.
Test Plan: Searched for Legalpad documents, saw more modern support (subscribers, order by, viewer()).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024
Differential Revision: https://secure.phabricator.com/D18786
Summary: Ref T13024. Updates LegalpadDocumentQuery to use slightly more modern constructions.
Test Plan: Queried for Legalpad documents, got the same results.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024
Differential Revision: https://secure.phabricator.com/D18785
Summary:
See PHI225. Previously, see D15335 / T10413. On workboards, we hide archived project tags since they aren't terribly useful in that context, at least most of the time. Originally, see T10349#159916 and D15297.
However, hovercards reuse this display logic, and it's inconsistent/confusing to hide them there, since the actual "Tags" elements on task pages show them. Narrow the scope of this rule.
Test Plan:
- Viewed a hovercard for a task with an archived project tagged, saw archived project.
- Viewed a workboard for the same task, saw only unarchived projects other than the current board tagged (this behavior is unchanged).
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18783
Summary:
Ref T13018. See that task and the Discourse thread for discussion.
This doesn't work as-is and we need to `og:description` everything to make it work. I don't want to sink any more time into this so just back all the changes out for now.
(The `<html>` change is unnecessary anyway.)
Test Plan: Strict revert.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13018
Differential Revision: https://secure.phabricator.com/D18782
Summary: Ref T13018. This is easy to get working roughly, at least, and seems reasonable.
Test Plan: Viewed page source, saw tags. Custom header logo still worked. Pretty hard to debug against a local install since Disqus / debugger tools can't hit it, but I'll see what it looks like in production and tweak it if I got anything horribly wrong.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13018
Differential Revision: https://secure.phabricator.com/D18780
Summary:
See D18776. See <https://discourse.phabricator-community.org/t/cant-create-maniphest-tasks-by-email/754/2>.
The change in D18776 to improve handling of non-utf8 HTML parts broke handling of mail with //no// HTML parts. Partly, this is because MimeMailParser has a "traditional" PHP-style API where the return type is an exciting surprise.
Test Plan:
- Sent a text-only message in `Mail.app`.
- Used "Show Raw" to copy it to `mail.txt`, verifying that the raw message contains ONLY a text body.
- Ran `cat mail.txt | ./scripts/mail/mail_handler.php --trace --process-duplicates`.
- Before patch: error about bad `idx()` on a non-array.
- After patch: clean mail processing.
- Did the same with a message with both HTML and text bodies to make sure I didn't break anything.
Ideally we'd probably get test coverage on this, but it's been touched roughly once a year since 2013 so it'll probably hold.
Reviewers: amckinley, alexmv
Reviewed By: amckinley, alexmv
Differential Revision: https://secure.phabricator.com/D18778
Summary:
Ref T13020. See PHI221.
Freeze legacy method `maniphest.gettasktransactions` in favor of modern method `transaction.search`.
Remove legacy "null on create" behavior from Maniphest status and priority transactions. This behavior is obsolete with EditEngine, and leads to inconsistent transaction sets in the transaction record.
The desired behavior is that transactions which don't do anything (e.g., default value was not changed) don't appear in the transaction log.
Test Plan:
- Viewed API UI and saw `maniphest.gettasktransactions` marked as "Frozen".
- Created a new task via web UI (without changing status/priority), queried transactions with `maniphest.gettasktransacitons`/`transaction.search`, no longer saw "null on create" no-op transactions in record.
- Web UI is unchanged, since these transactions were hidden before and now do not exist.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13020
Differential Revision: https://secure.phabricator.com/D18777
Summary:
D1093 did this for just the text/plain part of incoming
email. Most text/html parts choose to either use entity encoding
//or// are already UTF-8, thus obviating the need to transcode the
HTML part. However, this is not always the case, and leads to dropped
messages, by way of:
```
EXCEPTION: (Exception) Failed to JSON encode value (#5: Malformed UTF-8 characters, possibly incorrectly encoded): Dictionary value at key "html" is not valid UTF8, and cannot be JSON encoded: [snip HTML part of message content]```
Generalize the charset transcoding to not apply to just the text/plain part, but
both text/plain and text/html parts.
Test Plan:
Fed in a Windows-1252-encoded text/html part with 0x92
bytes in it; verified that $content only contained valid UTF-8 after
this change.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D18776
Summary: Whitespace has semantic meaning for yaml files, so we shouldn't suppress whitespace-only lines of diff by default.
Test Plan: Edited local config to include yaml files, saw expected whitespace changes.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18775
Summary:
See PHI180. Currently, if you begin creating or editing an inline and then swap display modes (for example, with "View Unified"), your edit is lost.
Persisting the editor state is complicated and this is very rare, so just prevent the action and warn the user instead.
Also make the warning persist for a little longer since a few of the messages, including this one, take a couple seconds to read now.
Test Plan:
- Edited a comment, tried to swap display modes, got a warning.
- Swapped display modes normally with no comment being edited.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18774
Summary:
Fixes paging on the Diffusion Repository List.
PhabricatorRepositoryQuery needs to specify a behavior for `null` on the OderableColumns definition for the `callsign` column.
See https://phabricator.wikimedia.org/T180457
Test Plan:
1. On an instance with more than 100 repositories
* some of which are missing a callsign
2. Attempt to sort by callsign.
3. See the sorted results
Previously:
3. Exception: "Column "0" has null value, but does not specify a null behavior."
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18773
Summary:
Depends on D18771. See PHI206. Currently, `arc diff --draft` only holds revisions in draft mode: it doesn't put them into draft mode if the install isn't configured to use draft mode.
Instead, make it a bit more forceful so that `arc diff --draft` can create into draft mode explicitly even if protoypes are off. This aligns with expection a little more clearly.
Test Plan: Ran `arc diff --draft` with prototypes off, got a revision held in draft mode.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18772
Summary: See PHI210. Ref T2543. Currently, we don't set this flag if you have prototypes off and don't get any of the new draft stuff, so the mail drops some of the details it is supposed to have.
Test Plan: Disabled prototypes, created a revision, saw summary / test plan in the initial mail.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18771
Summary:
Ref T13012. These flags can be exploited by attackers to execute code remotely. See T13012 for discussion and context.
Additionally, harden some Mercurial commands where possible (by using additional quoting or embedding arguments in other constructs) so they resist these flags and behave properly when passed arguments with these values.
Test Plan:
- Added unit tests.
- Verified "--config" and "--debugger" commands are rejected.
- Verified more commands now work properly even with branches and files named `--debugger`, although not all of them do.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13012
Differential Revision: https://secure.phabricator.com/D18769
Summary:
See PHI199. Ref T2543. When you run a RevisionQuery with a legacy status constraint (via `differential.query`), we currently don't match "Draft" revisions.
Use the actual complete map from `DifferentialRevisionStatus` instead of hard coding the status list so "Draft" is included.
Test Plan:
- Ran `differential.query` with `ids` and `status` for a draft revision.
- Before patch: revision not returned in results.
- After patch: revision returned in results.
(Note that it returns as "Needs Review", for compatibility.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18765
Summary:
See PHI190. This clarifies the ruleset a bit:
- If you accepted, then the author used "Request Review" explicitly, we now show "Accepted Earlier" instead of "Accepted" in the "Reviewers" list on the main revision page. This makes it sligthly more clear why the revision is back in your review queue without picking through the transaction log.
- Instead of moving all non-current accepts into "Ready to Review", move only voided accepts into "Ready to Review". This stops us from pulling older accepts which haven't been voided (which could have been incorrectly pulled) and correctly pulls older, voided accepts from before an update (for example: accept, then request review, then update) and generally aligns better with intent/expectation.
Test Plan:
- Accepted, requested review.
- Saw reviewer as "Accepted Earlier".
- Saw review in "Ready to Review" bucket.
- Accepted, updated (with sticky accept).
- Saw reviewer as "Accepted Prior Diff".
- Saw review as "Waiting on Authors".
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18764
Summary:
Ref PHI193. This method of enforcing policy checks is now (mostly) obsolete, and they're generally checked at the Controller/API level instead.
Notably, this method does not call `adjustObjectForPolicyChecks(...)` properly, so it can not handle special cases like "creating a project and taking its newly created members into account" for object policies like "Project Members".
Just remove these checks, which are redundant with checks elsewhere.
Test Plan:
- Set Project application default edit policy to "Administrators and Project Members".
- Tried to create a project as a non-administrator, adding myself.
- Before patch: policy fatal on a VOID object (the project with no PHID generated yet).
- After patch: object created properly. Got a sensible policy error if I didn't include myself as a member.
- Also verified that other edit rules are still enforced/respected (I can't edit stuff I shouldn't be able to edit).
- There's at least a bit of unit test coverage of this, too, which I updated to work via API (which hits the new broad capability checks) instead of via low-level transactions (which enforce only a subset of policy operations now).
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18763
Summary: See PHI195. This bulks out these API methods since all the requests are pretty straightforward.
Test Plan: Ran `edge.search` and `differential.revision.search`.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18762
Summary:
See PHI197. Populates "status" transactions and a few other obvious types where there's no security/performance/payload/formatting issue I can come up with.
The names here are the same as the names for editing with `maniphest.edit`.
Test Plan: Used `transaction.search` to retrieve transactions of all new types.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18761
Summary: Ref T12689. See PHI178. This isn't a complete solution (you may still get mailed via packages/projects) but should fix the obvious issue, where "Resigned" reviewers are incorrectly always sent mail directly.
Test Plan: Had Alice resign, interacted as Bailey, no mail to Alice.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12689
Differential Revision: https://secure.phabricator.com/D18758
Summary:
Depends on D18756. Fixes T12539. See PHI190. Currently, when this occurs:
- Alice accepts.
- Bailey requests review.
- Alice views her dashboard.
...the revision appears in "Waiting on Other Reviewers" (regardless of whether other reviewers actually exist or not).
Instead, ignore these voided/non-current accepts and let the revisions appear in "Ready to Review", which is more natural.
Test Plan: Went through the steps above. On `master`, saw revision in "Waiting on Other Reviewers". After patch, saw it in "Ready to Review".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12539
Differential Revision: https://secure.phabricator.com/D18757
Summary:
Ref T12539. See PHI190. Currently, each Diff has a `revisionID`, but Revisions do not point at the current active diff. To find the active diff for a given revision, we need to issue a separate query.
Furthermore, this query is inefficient for bulk loads: if we have a lot of revisions, we end up querying for all diff IDs for all those revisions first, then selecting the largest ones and querying again to get the actual diff objects. This strategy could likely be optimized but the query is a mess in any case.
In several cases, it's useful to have the active diff PHID without needing to do a second query -- sometimes for convenience, and sometimes for performance.
T12539 is an example of such a case: it would be nice to refine the bucketing logic (which only depends on active diff PHIDs), but it feels bad to make the page heavier to do it.
For now, this is unused. I'll start using it to fix the bucketing issue, and then we can expand it gradually to address other performance/convenience issues.
Test Plan:
- Ran migrations, inspected database, saw sensible values.
- Created a new revision, saw a sensible database value.
- Updated an existing revision, saw database update properly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12539
Differential Revision: https://secure.phabricator.com/D18756
Summary:
See PHI185. When looking at a revision, you can Command-Click (Mac) symbols to jump to their definitions (provided the symbol index has been built).
Currently, the code works on any node inside the changeset list, so it activates when clicking links inside inline comments and opening them in a new window.
To avoid this, don't activate if we're inside an inline comment. This technically prevents you from doing a symbol lookup on a symbol inside a codeblock inside an inline, but that seems fine/reasonable.
Test Plan: Wrote `Dxxx` in an inline, command-clicked it. Before: got a symbol lookup. After: just a new tab with the revision.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18753
Summary: Give profile images a little more space, fix "/" spacing, add a tooltip.
Test Plan: {F5251205}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18749
Summary:
Ref T2543. Fixes two relatively minor things:
- When builds finish in Harbormaster, send mail "From" the author.
- Set the `firstBroadcast` flag so that initial mail picks up earlier history (notably, the "reviewers" line).
For now, I'm not setting `firstBroadcast` on explicit "Request Review" (but maybe we should), and not trying to deal with weird cases where you leave a bunch of comments on a draft. Those might be fine as-is or may get tweaked later.
Test Plan: Created a revision with Harbormaster builds, ran builds, saw initial email come "From" the right user with more metadata.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18748
Summary: Depends on D18746. See PHI174. Adds small author portraits next to each blame line (this is similar to GitHub).
Test Plan:
My local test data isn't that great since I don't have commits from a lot of accounts, but looks functional:
{F5251056}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18747
Summary:
Ref PHI174. This reverts most of these changes:
- 37843127e9 / D18481
- 94cad30ac3 / D18474
- 12ae08b6b1 / D18473
- 0a01334172 / D18462
- ac91ab1ef9 / D18452
These changes made the Diffusion blame view very similar to GitHub's blame view. See D18452 for a before/after of the bulk of these changes; the other revisions are bugfixes.
I think this was generally a step backward, and not motivated by solving a specific problem. I've found the new UI less usable than the old one, and at least one install (see PHI174) also has.
In particular, the revision/commit titles are very bulky and not terribly useful; the date column also isn't terribly useful; the "age" color actually IS pretty useful and was heavily de-emphasized.
I've kept one bugfix here (missing `'a'` tag type) and kept the upgraded icon for "Skip Past This Commit".
I'm going to follow this up with some additional changes:
- Show a small author profile icon, similar to GitHub, to address PHI174 more directly.
- Try a zebra-stripe on blocks of rows to make it more clear where changes affected by a particular commit begin and end.
- Try a hue shift, not just a brightness/saturation shift, to make the "age" color more distinct.
- Try computing colors as even steps, not based purely on age. Currently, if a file has one long-distant commit and several recent commits, all the recent ones show up as very bright green. I think this would probably be more useful if they were distributed more evenly across the available color bands.
Test Plan:
Viewed blame views in Diffusion, saw a more compact UI similar to the old UI.
{F5251019}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18746
Summary: Ref T2543. After D18731, Herald build rules run more often, but now incorrectly try to run builds when Diffusion closes a revision because a commit landed.
Test Plan: Made some mundane updates locally; this is tricky to test comprehensively locally so I'm mostly planning to just push it to `secure`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18745
Summary:
Ref T2543. Instead of autosubmitting revisions to "Needs Review" when builds finish, allow them to be held in "Draft" indefinitely.
There's currently no UI for this. I plan to just expose it as `arc diff --draft` for now, in a followup change.
Test Plan:
- Created a revision (via Conduit) with "hold as draft", saw it hold as draft after builds finished.
- Created a revision (normally), saw it autosubmit after builds finished.
- Requested review of a "hold as draft" revision to kick it out of draft state.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18737
Summary:
Depends on D18740. Prepares `arc` to receive a `--draft` flag by letting us switch to "differential.revision.edit" instead of "differential.createrevision".
To "differential.revision.edit", we need a transaction list, but we can't automatically construct this list from a field map. Return the transaction list alongside the field map.
The next change uses this list (if available) to switch us to the modern API method.
Test Plan: Ran `arc diff` on the experiemntal branch with followup changes, got a new revision.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18741
Summary: See PHI90. For now, this only provides a limited amount of information, but should satisfy the use case in PHI90 and build toward a more complete version in the future.
Test Plan: Used new Conduit method to retrieve information about diffs.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18744
Summary:
Ref T2543. Fixes T10109.
Currently, Herald only runs in Differential when a change updates the diff. This is partly for historical reasons, and partly because we don't want to restart builds every time someone makes a comment. However, this behavior is inconsistent with other applications (which always trigger on any change), and occasionally confusing to users (in T10109, for example) or otherwise undesirable.
A similar issue is that T2543 has introduced a "Draft" state, where revisions don't send normal mail until builds finish. This interacts poorly with "Send me an email" rules (which shouldn't do anything here) and particularly with "Send me an email + only run these actions the first time the rule matches", since that might have an effect like "do nothing when the revision is created, then never anything again since you already did nothing once".
To navigate both of these issues, let objects tell Herald that certain actions (like mail or builds) are currently forbidden. If a rule uses a field or action which is currently forbidden, the whole rule automatically fails before it executes, but doesn't count toward "only the first time" as far as Herald's tracking of rule execution is concerned.
Then, forbid mail for draft revisions, and forbid builds for revisions which didn't just get updated. Forbidding mail fixes the issues with "Send me an email" that were created by the introduction of the draft state.
Finally, make Herald run on every revision update, not just substantive updates to the diff. This resolves T10109.
Test Plan:
Created revisions via the draft -> submit workflow, saw different transcripts. Here's a mail action being forbidden for a draft:
{F5237324}
Here's a build action being forbidden for a "mundane" update:
{F5237326}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T10109, T2543
Differential Revision: https://secure.phabricator.com/D18731
Summary: Depends on D18734. See PHI176. We run this query on the main Drydock lease web UI, among other places. There is currently no `status` key which can satisfy it.
Test Plan:
Viewed Drydock lease page to get the query.
Ran ##explain SELECT * FROM `drydock_lease` WHERE (status IN ('pending', 'acquired', 'active')) ORDER BY `id` DESC LIMIT 101;## before and after the change.
I don't have a ton of leases locally so the un-key'd EXPLAIN isn't //that// bad, but still shows that we're getting a better key. Before:
```
mysql> explain SELECT * FROM `drydock_lease` WHERE (status IN ('pending', 'acquired', 'active')) ORDER BY `id` DESC LIMIT 101;
+----+-------------+---------------+-------+---------------+---------+---------+------+------+-------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+---------------+-------+---------------+---------+---------+------+------+-------------+
| 1 | SIMPLE | drydock_lease | index | NULL | PRIMARY | 4 | NULL | 101 | Using where |
+----+-------------+---------------+-------+---------------+---------+---------+------+------+-------------+
1 row in set (0.00 sec)
```
After:
```
mysql> explain SELECT * FROM `drydock_lease` WHERE (status IN ('pending', 'acquired', 'active')) ORDER BY `id` DESC LIMIT 101;
+----+-------------+---------------+-------+---------------+------------+---------+------+------+---------------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+---------------+-------+---------------+------------+---------+------+------+---------------------------------------+
| 1 | SIMPLE | drydock_lease | range | key_status | key_status | 130 | NULL | 5 | Using index condition; Using filesort |
+----+-------------+---------------+-------+---------------+------------+---------+------+------+---------------------------------------+
1 row in set (0.00 sec)
```
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18735
Summary: See PHI176. Depends on D18733. We issue a query when deleting files that currently doesn't hit any keys.
Test Plan:
Ran `./bin/remove destroy --force --trace F56376` to get the query.
Ran ##SELECT * FROM `file` WHERE storageEngine = 'blob' AND storageHandle = '23366' LIMIT 1## before and after the change.
Before:
```
mysql> explain SELECT * FROM `file` WHERE storageEngine = 'blob' AND storageHandle = '23366' LIMIT 1;
+----+-------------+-------+------+---------------+------+---------+------+-------+-------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+-------+------+---------------+------+---------+------+-------+-------------+
| 1 | SIMPLE | file | ALL | NULL | NULL | NULL | NULL | 33866 | Using where |
+----+-------------+-------+------+---------------+------+---------+------+-------+-------------+
1 row in set (0.01 sec)
```
After:
```
mysql> explain SELECT * FROM `file` WHERE storageEngine = 'blob' AND storageHandle = '23366' LIMIT 1;
+----+-------------+-------+------+---------------+------------+---------+-------------+------+------------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+-------+------+---------------+------------+---------+-------------+------+------------------------------------+
| 1 | SIMPLE | file | ref | key_engine | key_engine | 388 | const,const | 190 | Using index condition; Using where |
+----+-------------+-------+------+---------------+------------+---------+-------------+------+------------------------------------+
1 row in set (0.00 sec)
```
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18734
Summary: See PHI176. This is issued periodically by the garbage collector. Normally this table is relatively small-ish so this missing key isn't hugely noticeable.
Test Plan:
Ran `./bin/garbage collect --collector daemon.processes --trace` to get the query the GC runs.
Ran ##DELETE FROM `daemon_logevent` WHERE epoch < 1508443504 LIMIT 100## before and after the key, saw a much better query plan afterward:
Before:
```
mysql> explain DELETE FROM `daemon_logevent` WHERE epoch < 1508443504 LIMIT 100;
+----+-------------+-----------------+------+---------------+------+---------+------+-------+-------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+-----------------+------+---------------+------+---------+------+-------+-------------+
| 1 | SIMPLE | daemon_logevent | ALL | NULL | NULL | NULL | NULL | 19325 | Using where |
+----+-------------+-----------------+------+---------------+------+---------+------+-------+-------------+
1 row in set (0.00 sec)
```
After:
```
mysql> explain DELETE FROM `daemon_logevent` WHERE epoch < 1508443504 LIMIT 100;
+----+-------------+-----------------+-------+---------------+-----------+---------+-------+------+-------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+-----------------+-------+---------------+-----------+---------+-------+------+-------------+
| 1 | SIMPLE | daemon_logevent | range | key_epoch | key_epoch | 4 | const | 1 | Using where |
+----+-------------+-----------------+-------+---------------+-----------+---------+-------+------+-------------+
1 row in set (0.00 sec)
```
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18733
Summary: See PHI176. We issue a query with only `artifactIndex` from `BuildTarget`, but don't have an applicable key.
Test Plan: This isn't on the normal Harbormaster execution path so I'm not 100% sure I have a local repro, but will confirm with customer.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18732