Summary:
This allows you to configure a single mailbox for all mail sent by phabricator,
so you
can keep a mailaddress like bugs@example.com and don't need a catchall on your
domain/subdomain.
Test Plan:
Enabled and disabled suffix. Saw mails generated have to correct prefix. Also
piped raw mails
into the scripts/mail/mail_handler.php and ensured comments went into
phabricator for both maniphest
and differential.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: 815
Summary:
When rendering commit messages, drive all the logic through field specification
classes instead of the hard-coded DifferentialCommitMessageData class. This
removes DifferentialCommitMessageData and support classes.
Note that this effectively reverts D546, and will cause a minor break for
Facebook (Task IDs will no longer render in commit messages generated by "arc
amend", and will not be editable via "arc diff --edit"). This can be resolved by
implementing the feature as a custom field. While I've been able to preserve the
task ID functionality elsewhere, I felt this implementation was too complex to
reasonably leave hooks for, and the break is pretty minor.
Test Plan:
- Made numerous calls to differential.getcommitmessage across many diffs in
various states, with and without 'edit' and with and without various field
overrides.
- General behavior seems correct (messages look accurate, and have the
expected information). Special fields like "Reviewed By" and "git-svn-id" seem
to work correctly.
- Edit behavior seems correct (edit mode shows all editable fields, hides
fields like "Reviewed By").
- Field overwrite behavior seems correct (overwritable fields show the correct
values when overwritten, ignore provided values otherwise).
Reviewed By: jungejason
Reviewers: jungejason, tuomaspelkonen, aran
CC: aran, jungejason
Differential Revision: 814
Summary:
Make the unhandled exception dialogs slightly more useful:
- Make them easier to read.
- Link to files from Phabricator libraries.
- Don't show traces by default.
- Show traces in development mode.
- Rename button from "Cancel" to "Close" and only show it for Ajax.
Test Plan: Rigged DirectoryHomeController to throw, loaded home page. Changed
stack trace setting in config. Clicked some files in the trace.
Reviewed By: aran
Reviewers: aran, jungejason, tuomaspelkonen, codeblock
CC: aran, epriestley
Differential Revision: 823
domain
Summary:
See D758, D759.
- Provide a strongly recommended setting which permits configuration of an
alternate domain.
- Lock cookies down better: set them on the exact domain, and use SSL-only if
the configuration is HTTPS.
- Prevent Phabriator from setting cookies on other domains.
This assumes D759 will land, it is not effective without that change.
Test Plan:
- Attempted to login from a different domain and was rejected.
- Logged out, logged back in normally.
- Put install in setup mode and verified it revealed a warning.
- Configured an alterate domain.
- Tried to view an image with an old URI, got a 400.
- Went to /files/ and verified links rendered to the alternate domain.
- Viewed an alternate domain file.
- Tried to view an alternate domain file without the secret key, got a 404.
Reviewers: andrewjcg, erling, aran, tuomaspelkonen, jungejason, codeblock
CC: aran
Differential Revision: 760
Summary:
- Fix a bug where 'caption' didn't do anything.
- Provide an abstract base implementation for extensions.
- Add some documentation.
- Expose aux fields via conduit.
Test Plan: Added some fields like "Dinosaur", "Kilograms" and "derp" on my local
install. Read documentation.
Reviewed By: jungejason
Reviewers: hunterbridges, jungejason, tuomaspelkonen, aran
CC: aran, philc, jungejason
Differential Revision: 785
Summary:
Precursor to building this out to solve T343. This is similar to the Maniphest
fields we landed recently, although I think they're dissimilar enough that it
isn't worth going crazy trying to make them share code, at least for now.
This doesn't really do anything yet, just adds a storage object and a couple of
selector/field indirection classes.
Test Plan: Ran SQL upgrade script, created an aux field.
Reviewed By: jungejason
Reviewers: jungejason, tuomaspelkonen, aran
CC: aran, jungejason
Differential Revision: 798
Summary:
In preparation for adding another search engine (see T355):
- Rename "executor" to "engine".
- Move all engine-specific operations into the engine. Specifically, this
means that indexing moves out of the document store and into the engine (it was
sort of silly where it was before).
- Split choice of an engine into an overridable "selector" class, a base API,
and a concrete MySQL implementation (just like storage engine selection).
- Make all callers go through the indirection layer.
The default selector just unconditionally selects the MySQL engine, but now
(with D786) I can build an Elastic Search engine and you guys can build a
multi-target engine if you want and I don't get there fast enough.
Test Plan:
- Created a new document (task).
- Searched for and found it.
- Viewed index reconstruction.
Reviewed By: jungejason
Reviewers: jungejason, amckinley, tuomaspelkonen, aran
CC: aran, jungejason, epriestley
Differential Revision: 788
Summary: Implements an S3 storage engine option for Phabricator.
Test Plan:
- Uploaded files to S3.
- Looked at them.
- Verified they appeared in S3 using the S3 file browser.
Reviewed By: jungejason
Reviewers: jungejason, tuomaspelkonen, aran
CC: aran, jungejason
Differential Revision: 752
Test Plan: Add fields to config based on specification on T335. View on Task
Edit and Task Detail. Supported types are string, int and select
Reviewed By: epriestley
Reviewers: epriestley
CC: aran, epriestley, hunterbridges
Differential Revision: 753
Summary:
Python people don't seem to like the 'ignore-all' as default. Provide a way
to configure which file types should not use 'ignore-all'.
Test Plan:
Tested that it worked with bunch of Python of files and non-python
files. Cache was disabled during the test.
Reviewed By: jungejason
Reviewers: epriestley, jungejason
Commenters: epriestley
CC: aran, jungejason, epriestley
Differential Revision: 713
Summary:
It makes more sense to just make this a settings panel rather than a standalone
app, particularly since setting panels are relatively well separated now.
Also default-disabled the SSH Keys interface since it won't currently be useful
for most installs.
Test Plan: Edited preferences.
Reviewed By: jungejason
Reviewers: tuomaspelkonen, jungejason, aran
CC: aran, jungejason
Differential Revision: 716
Summary:
See T344. Currently, there's a hard-coded 12MB filesize limit and some awkward
interactions with MySQL's max_allowed_packet. Make this system generally more
robust:
- Move the upload limit to configuration.
- Add setup steps which reconcile max_allowed_packet vs MySQL file storage
limits.
- Add a layer of indirection between uploading files and storage engines.
- Allow the definition of new storage engines.
- Define a local disk storage engine.
- Add a "storage engine selector" class which manages choosing which storage
engines to put files in.
- Document storage engines.
- Document file storage classes.
Test Plan:
Setup mode:
- Disabled MySQL storage engine, misconfigured it, configured it correctly.
- Disabled file storage engine, set it to something invalid, set it to
something valid.
- Verified max_allowed_packet is read correctly.
Application mode:
- Configured local file storage.
- Uploaded large and small files.
- Verified larger files were written to local storage.
- Verified smaller files were written to MySQL blob storage.
Documentation:
- Read documentation.
Reviewed By: jungejason
Reviewers: jungejason, tuomaspelkonen, aran
CC: aran, epriestley, jungejason
Differential Revision: 695
Summary: Depends on D628. Provides a config option so you can set up a public
feed, which you can iframe. This needs some work but sort of works.
Test Plan: Loaded the public feed as a logged-out user.
Reviewed By: codeblock
Reviewers: jungejason, tuomaspelkonen, aran, codeblock
CC: aran, codeblock
Differential Revision: 635
Summary:
Add the differential parse cache to the GC. This is the largest object in the
system by a wide margin, I think.
This table is potentially gigantic which is why the script truncates it before
doing a schema change.
Test Plan: Ran the GC daemon, it cleaned up some parse caches.
Reviewed By: jungejason
Reviewers: tuomaspelkonen, jungejason, aran
Commenters: tuomaspelkonen
CC: aran, jungejason, tuomaspelkonen, epriestley
Differential Revision: 620
Summary: Reduce the amount of code duplication here and allow for an override
configuration on the filename.map stuff.
Test Plan: Checked paste, diffusion and differential syntax highlighting and
everything appeared reasonable.
Reviewed By: codeblock
Reviewers: tuomaspelkonen, codeblock, jungejason, aran
CC: aran, codeblock, epriestley
Differential Revision: 601
Summary: This lets you configure an email address which will create tasks when
emails are sent to it. It's pretty basic but should get us most of the way
there.
Test Plan: Configured an address and created a task via email. Replied to a task
via email to check that I didn't break that.
Reviewed By: tuomaspelkonen
Reviewers: davidreuss, jungejason, tuomaspelkonen, aran
CC: aran, epriestley, tuomaspelkonen
Differential Revision: 590
Summary:
Phabricator generates a bunch of data that we don't need to keep around forever,
add a GC daemon to get rid of it with some basic configuration options.
This needs a couple more diffs to get some of the details but I think this is a
reasonable start.
I also fixed a couple of UI things related to this, e.g. the daemon logs page
going crazy when a daemon gets stuck in a loop and dumps tons of data to stdout.
Test Plan:
- Ran gc daemon in 'phd debug' mode and saw it delete stuff, then sleep once
it had cleaned everything up.
- Mucked around with TTLs and verified they work correctly.
- Viewed gc'd transcripts in the web interface and made sure they displayed
okay.
- Viewed daemon logs before/after garbage collection.
- Running some run-at / run-for tests now, I'll update if the daemon doesn't
shut off in ~10-15 minutes. :P
Reviewed By: tuomaspelkonen
Reviewers: jungejason, tuomaspelkonen, aran
CC: aran, tuomaspelkonen, epriestley
Differential Revision: 583
Summary:
- Add a default list of supported languages to default.conf.php
and make the initial/default value customizable.
- Store a '' in the database to infer the language from the filename/title.
Test Plan:
Tested in my sandbox with pygments enabled and disabled and various
combinations of filename/extension/dropdown selection.
Reviewers:
epriestley
CC:
Differential Revision: 587
Summary:
We already support this (and Facebook uses it) but it is difficult to configure
and you have to write a bunch of code. Instead, provide a simple flag.
See the documentation changes for details, but when this flag is enabled we send
one email with a reply-to like "D2+public+23hf91fh19fh@phabricator.example.com".
Anyone can reply to this, and we figure out who they are based on their "From"
address instead of a unique hash. This is less secure, but a reasonable tradeoff
in many cases.
This also has the advantage over a naive implementation of at least doing object
hash validation.
@jungejason: I don't think this affects Facebook's implementation but this is an
area where we've had problems in the past, so watch out for it when you deploy.
Also note that you must set "metamta.public-replies" to true since Maniphest now
looks for that key specifically before going into public reply mode; it no
longer just tests for a public reply address being generateable (since it can
always generate one now).
Test Plan:
Swapped my local install in and out of public reply mode and commented on
objects. Got expected email behavior. Replied to public and private email
addresses.
Attacked public addresses by using them when the install was configured to
disallow them and by altering the hash and the from address. All this stuff was
rejected.
Reviewed By: jungejason
Reviewers: moskov, jungejason, tuomaspelkonen, aran
CC: aran, epriestley, moskov, jungejason
Differential Revision: 563
Summary:
when "arc diff" generates a revision, it attaches a task id
if one is included. However, "arc amend" did not return a task id,
effectively stripping it from the commit message. This diff fixes
that.
NOTE: This is dependent on revision 549 https://secure.phabricator.com/D549
Test Plan:
0. created a custom class to append Facebook task IDs to commit messages and
attached it to the differential.append-commit-message-class config variable
1. created a new diff in the www repot
2. included Task ID: 609350 in the git commit message
3. "arc diff" to generate the revision
4. "arc amend"
5. ensure that the "Task ID:" field remained in the git commit message
Reviewed By: epriestley
Reviewers: dpepper, jungejason, epriestley
CC: aran, epriestley, mgummelt
Differential Revision: 546
Summary:
- Make wrap width settable in PHP.
- Dynamically generate max-width based on configurable maximum width.
- Constrain non-diff elements to standard width.
- Provide a configuration setting.
Test Plan:
Set various things to 100 / 120, as far as I could tell everything seemed to
render sensibly? This should have no effect on 80-col changes.
Reviewed By: jdperlow
Reviewers: jdperlow, tuomaspelkonen, jungejason, aran
CC: aran, jdperlow
Differential Revision: 413
Summary:
This already pretty much works, document it explicitly.
Test Plan:
Moved my MySQL server over to port 3307.
Reviewed By: aran
Reviewers: jungejason, aran
CC: aran
Differential Revision: 411
Summary:
- Allow user to specify "myconf" (recommended) or "myconf.conf.php" (less
surprising).
- Make sure syntax errors and other problems are surfaced.
- If the configuration value isn't valid, give them a list of all valid
values.
Test Plan:
- Added a syntax error, got a useful error.
- Set PHABRICATOR_ENV to a silly value, got a list of valid values.
- Set PHABRICATOR_ENV to have .conf.php suffix, site still worked.
Reviewed By: kevinwallace
Reviewers: kevinwallace, codeblock, aran, jungejason, tuomaspelkonen
CC: aran, epriestley, kevinwallace
Differential Revision: 381
Summary:
Some PHP has junky defaults for error_reporting / display_errors, and the "@"
silences fatals. The @ should never have been there, I just copied it from the
libphutil initializer where we use @ because the default error message can be
confusing and we display a more useful one.
Test Plan:
Added fatals to my conf file, got a decent error message instead of silent exit
with err=255.
Reviewed By: aran
Reviewers: tuomaspelkonen, aran, jungejason
CC: aran
Differential Revision: 355
Summary:
Vendor specific markups are now possible.
Test Plan:
Tested with the Facebook specific tasks markup.
Reviewed By: jungejason
Reviewers: epriestley, jungejason
CC: aran, jungejason
Differential Revision: 349
Summary: SendGrid is a popular mail delivery platform, similar to Amazon SES. Provide support for delivering email via their REST API.
Test Plan: Created a SendGrid account, configured my local install to use it, sent some mail, received mail.
Reviewers: tuomaspelkonen, jungejason, aran
CC: ccheever
Differential Revision: 347
Summary:
This is just fluff to let me mailfilter my local sandbox. Would also allow the
Facebook install to return to "[diff]" if eletuchy is still unhappy about this
change.
Test Plan:
Triggered maniphest/differential emails, had normal prefixes. Overrode prefixes
in my custom config, got sandbox-unique prefixes.
Reviewed By: aran
Reviewers: jungejason, tuomaspelkonen, aran
CC: elgenie, aran
Differential Revision: 291
Summary:
Conduit already has multiple-session code, just move it to the main
establishSession() method and set a web session limit larger than 1.
NOTE: This will log everyone out since we no longer look for the "web" session,
only for "web-1", "web-2", ..., etc. Presumably this doesn't matter.
Test Plan:
Applied patch, was logged out. Logged in in Safari. Verified I was issued
"web-1". Logged in in Firefox. Verified I was issued "web-2".
Kept logging in and out until I got issued "web-5", then did it again and was
issued "web-1" with a new key.
Ran conduit methods and verified they work and correctly cycled session keys.
Reviewed By: tuomaspelkonen
Reviewers: tuomaspelkonen, jungejason, aran
Commenters: jungejason
CC: rm, fzamore, ola, aran, epriestley, jungejason, tuomaspelkonen
Differential Revision: 264
Summary:
Provide an "isAdmin" flag for users, to designate administrative users.
Restore the account editing interface and allow it to set role flags and reset
passwords.
Provide an "isDisabled" flag for users and shut down all system access for them.
Test Plan:
Created "admin" and "disabled" users. Did administrative things with the admin
user. Tried to do stuff with the disabled user and was rebuffed. Tried to access
administrative interfaces with a normal non-admin user and was denied.
Reviewed By: aran
Reviewers: tuomaspelkonen, jungejason, aran
CC: ccheever, aran
Differential Revision: 278
Summary:
ccheever did an install and gave me some feedback about issues he hit. This
tries to:
- properly document how to configure outbound email;
- test outbound email configuration in the setup mode;
- provide basic daemon documentation;
- document that phabricator.base-uri is required for all installs.
Test Plan:
read documentation, jumped through all the setup branches to test configuration
error detection
Reviewed By: aran
Reviewers: tuomaspelkonen, jungejason, aran, rm
CC: ccheever, aran
Differential Revision: 276
Summary:
Provide a base PhabricatorMailReplyHandler class which handles the plumbing for
multiplexing email if necessary and supporting public and private reply handler
addressses. DifferentialReplyHandler now extends it, and a new
ManiphestReplyHandler also does.
The general approach here is that we have three supported cases:
- no reply handler, default config, same as what we're doing now
- public reply handler, requires overriding classes but just sets "reply-to"
to some address the install generates and still sends only one email
- private reply handler, provides a default generation mechanism or you can
override it and splits mail apart so we send one to each recipient
Test Plan:
Sent email from Maniphest and Differential with and without
reply-handler-domains set.
Reviewed By: aran
Reviewers: jungejason, tuomaspelkonen, aran
CC: aran, epriestley
Differential Revision: 254
Summary:
Alters the installation instructions to guide installers into a "setup" mode
which does config file sanity checking.
Test Plan:
Put myself in setup mode, simulated all the failures it detects, took myself out
of setup mode, Phabricator works OK.
Reviewed By: tuomaspelkonen
Reviewers: jungejason, tuomaspelkonen, aran
CC: aran, tuomaspelkonen, epriestley
Differential Revision: 230
Summary:
We always return HTTP 200 right now and don't send a "Last-Modified" header, so
browsers download more data then necessary if you sit on a page mashing reload
(for example).
Test Plan:
Used Charles to verify HTTP response codes from 400, 404 and 304 responses.
Mashed reload a bunch and saw that the server sent back 304s.
Changed the resource hash seed and saw 200s, then 304s on reload.
Reviewed By: tuomaspelkonen
Reviewers: tuomaspelkonen, jungejason, aran
CC: bmaurer, aran, tuomaspelkonen
Differential Revision: 253
Summary:
add email reply handler so that the user can reply to a
differential email to act on the revision. It generates the reply-to
email address, creates email body text with supported commands list, and
handle the action request on the differential revision.
Right now the reply-to handing is disabled in the config file. But a
site using Phabricator can enable it and implement a class
inheriting from DifferentialReplyHandler to enable customized email
handing.
Later we will need to add code to DifferentialMail.php to support
sending separate email to each email recipient to achieve better
security (see D226). The reply-to will be something like
D<revision_id>+<user_id>+<hash>@domain.com. We will create separate task
for it.
Test Plan:
tried comment on a revision from web UI and the email was
sent out as before without any change. When a subclass of
DifferentialReplyHandler is implemented and enabled, email's reply-to is
set and email text is added. Reply to the email with valid command did
create action to the revision.
Reviewed By: epriestley
Reviewers: tuomaspelkonen, epriestley, slawekbiel, dpepper
CC: aran, epriestley, jungejason
Differential Revision: 224
Summary:
Provides support for per-user x per-object unique reply-to email addresses, plus
SMTP integration.
This does not actually make Phabricator use these in outbound email.
Test Plan:
Used test console to validate in-Phabricator routing and handling.
Piped emails into the "mail_handler.php" script to validate mail parsing.
Configured sendmail and sent mail to Phabricator.
Technically I haven't conducted all parts of this test on the same machine since
I lost the will to configure more SMTP servers after configuring phabricator.com
Reviewed By: jungejason
Reviewers: jungejason, tuomaspelkonen, aran
CC: aran, epriestley, jungejason
Differential Revision: 226
Summary:
Previously, Remarkup allowed you to paste in an image URI and get an inline
image. However, it did this by hotlinking the image which isn't so hot in an
open source product.
Restore this feature, but use image proxying instead. The existing image macro
code does most of the work.
There is a mild security risk depending on the network setup so I've left this
default-disabled and made a note about it. It should be safe to enable for
Facebook.
Test Plan:
Pasted in image and non-image links, got reasonable behavior. Verified proxying
appears to work. Verified that file:// shenanigans produce 400.
Reviewed By: tuomaspelkonen
Reviewers: aran, jungejason, tuomaspelkonen
Commenters: cpiro
CC: aran, cpiro, tuomaspelkonen
Differential Revision: 214
Summary:
Some users have had problems with the database initialization process, simplify
it by creating a new "initialize.sql" dump at v34.
I also populated this dump with the right landing screen (so all the tools
actually have links) and a default avatar.
Test Plan:
Dropped all databases, initialized according to documentation, ended up in a
good state with sensible defaults.
Reviewed By: jungejason
Reviewers: aran, jungejason, tuomaspelkonen
CC: aran, jungejason
Differential Revision: 210
Summary:
The correct name of this key is 'github.application-secret', not
'github.secret'. Make DarkConsole check that all the masked keys exist to
prevent this from happening again. This isn't super important since this
is just intended to protected against casual security lapses (taking a
screenshot with DarkCnosole's "Config" tab open, for instance) but it's easy
to check for so it seems worthwhile to get right.
Test Plan:
Loaded page without the actual config file change, got an exception.
Fixed the config, reloaded the page, good news goats (really trying to get this
to catch on since goats are adorable).
Reviewed By: aran
Reviewers: tuomaspelkonen, jungejason, aran
CC: aran
Differential Revision: 189
Summary:
This permits individual deployments to better configure their
database configuration, e.g. to allow more dynamic configuration that reacts
to database moves or master/slave replication.
Test Plan:
Browse
Reviewed By: epriestley
Reviewers: Girish, epriestley
CC: aran, epriestley
Differential Revision: 183
Summary:
Add ability to define mysql slaves and then use that connection on 'r'
connection modes. 'w' connections go to the master server.
Test Plan:
- php -l and checkModule
- worked in my devbox
Reviewed By: jungejason
Reviewers: dpepper, tuomaspelkonen, jungejason
CC: jungejason, aran
Revert Plan:
sure
Differential Revision: 175
