Summary:
Fixes T13313. The "Download Raw Diff" workflow in Differential currently uses an older way of interacting with Files that doesn't engage the chunk engine and can't handle 8MB+ files.
Update to `IteratorFileUploadSource` -- we're still passing in a single giant blob, but this approach can be chunked.
This will still break somewhere north of 8MB (it will break at 2GB with the PHP string limit if nowhere sooner, since we're putting the entire raw diff in `$raw_diff` rather than using a rope/stream) but will likely survive diffs in the hundreds-of-megabytes range for now.
Test Plan:
- Added `str_repeat('x', 1024 * 1024 * 9)` to the `$raw_diff` to create a 9MB+ diff.
- Configured file storage with no engine explicitly configured for >8MB chunks (i.e., "reasonably").
- Clicked "Download Raw Diff".
- Before: misleading file storage engine error ("no engine can store this file").
- After: large, raw diff response.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13313
Differential Revision: https://secure.phabricator.com/D20579
Summary: Ref T13303. See B22967. This should be "msortv()" but didn't get updated properly.
Test Plan: The system works!
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13303
Differential Revision: https://secure.phabricator.com/D20585
Summary: Ref T13303. I upgraded this to a vector-based sort but forgot to type a "v", which means the sort has different stability under PHP 5.5. See D20582 for a root cause fix.
Test Plan: Locally, on PHP7, not much changes. I expect this to fix the odd selection of title stories in mail and notification stories on `secure`, which is running PHP 5.5.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13303
Differential Revision: https://secure.phabricator.com/D20583
Summary:
Fixes T13307. We currently require "CAN_EDIT" to sign actions, but it's fine to sign a comment with only "CAN_INTERACT".
Since the actions like "Accept Revision" already work like this, the fix is one line.
Test Plan: {F6488135}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13307
Differential Revision: https://secure.phabricator.com/D20574
Summary:
Ref T13306. Currently, there's no easy way to import a third-party local-disk file dump into a Phacility instance.
Add some more options to `bin/files migrate` to support this. In particular, this enables:
```
$ ./bin/files --from-engine local-disk --engine amazon-s3 --local-disk-source path/to/backup
```
...to import these files into S3 directly.
These are general-purpose options and theoretically useful in other use cases, although realistically those cases are probably very rare.
Test Plan: Used `bin/files` with the new options to move files in and out of local disk storage in an arbitrary backup directory. Got clean exports/imports.
Reviewers: amckinley
Maniphest Tasks: T13306
Differential Revision: https://secure.phabricator.com/D20571
Summary:
Ref T13298. Add a simple profiler as a starting point to catch any egregiously expensive rules or conditions.
This doesn't profile rule actions, so if "Add subscriber" (or whatever) is outrageously expensive it won't show up on the profile. Right now, actions get evaluated inside the Adapter so they're hard to profile. A future change could likely dig them out without too much trouble. I generally expect actions to be less expensive than conditions.
This also can't pin down a //specific// condition being expensive, but if you see that `H123` takes 20s to evaluate you can probably guess that the giant complicated regex is the expensive part.
Test Plan: {F6473407}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13298
Differential Revision: https://secure.phabricator.com/D20566
Summary:
Ref PHI1275. Previously, see T591. See also T7963. Headers are currently very visually similar to one another, and similar to the text size:
{F6485441}
I think the design intent was to make it hard to make bad-looking documents, but all the headers end up being very samey.
Differentiate the sizes of the headers better so they're much more obvious (e.g., when scrolling through a document) and the different levels are more distinct.
This might be a little overboard, but we can always pull it back a bit if it's too much, and I think giving users more control in Remarkup (in cases where it doesn't create some weird syntax/parsing nightmare) is generally a good thing.
Test Plan: {F6485447}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20569
Summary:
Depends on D20566. Ref T13298. See PHI1280. Currently, there's no clean way to disable problematic personal rules. This comes up occasionally and sometimes isn't really the best approach to solving a problem, but is a generally reasonable capability to provide.
Allow Herald rules (including personal rules) to be disabled/enabled via `bin/herald rule ... --disable/--enable`.
Test Plan: Used the CLI to disable and enable a personal rule.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: jmeador
Maniphest Tasks: T13298
Differential Revision: https://secure.phabricator.com/D20567
Summary:
Fixes T13300. Currently, if you create a revision and then immediately land it (either using `--draft` or just beating Harbormaster to the punch) it can be stuck in "Draft" forever.
Instead, count landing changes like this as a publishing action.
Test Plan:
- Used `arc diff --hold` to create a revision, then pushed the commit immediately.
- Before change: revision closed, but was stuck in draft.
- After change: revision closed and was promoted out of draft.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13300
Differential Revision: https://secure.phabricator.com/D20565
Summary:
See PHI1118. That issue may describe more than one bug, but the recent ordering changes to the import pipeline likely make this at least part of the problem.
Previously, commits would always close associated revisions before we made it to the "publish" step. This is no longer true, so we might be triggering audits on a commit before the associated revision actually closes.
Accommodate this by counting a revision in either "Accepted" or "Published (Was Previously Accepted)" as "reviewed".
Test Plan:
- With commit C affecting paths in package P with "Audit Unreviewed Commits and Commits With No Owner Involvement", associated with revision R, with both R and C authored by the same user, and "R" in the state "Accepted", used `bin/repository reparse --publish <hash>` to republish the commit.
- Before change: audit by package P triggered.
- After change: audit by package P no longer triggered.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20564
Summary:
Ref T13303. In D20525 I fixed an issue where transaction rendering could use cached values with the wrong viewer by reloading transactions.
However, reloading transactions may also reorder them as a side effect, since `withPHIDs(...)` does not imply an order. This can make transaction rendering order in mail wrong/inconsistent.
Instead, reorder the transactions before continuing so mail transaction order is consistent.
Test Plan: Applied a group of transactions to a task, saw a more consistent rendering order in mail after the change.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13303
Differential Revision: https://secure.phabricator.com/D20563
Summary:
See downstream <https://phabricator.wikimedia.org/T1050>. Some time ago, we added a "View Revision" button to Differential mail. This hasn't created any problems and generally seems good / desirable.
It isn't trivial to just add everywhere since we need a translation string in each case, but at least add it to Maniphest for now. Going forward, we can fill in more applications as they come up.
Test Plan:
Used `bin/mail show-outbound --id <x> --dump-html`:
{F6470461}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20561
Summary:
See downstream <https://phabricator.wikimedia.org/T88655>. This is very marginal, but we currently allow comments consisting of //only// whitespace.
These are probably always mistakes, so treat them like completely empty comments.
(We intentionally do not trim leading or trailing whitespace from comments when posting them becuase leading spaces can be used to trigger codeblock formatting.)
Test Plan:
- Posted empty, nonempty, and whitespace-only comments.
- Whitespace-only comments now have the same behavior as truly empty comments (e.g., do not actually generate a transaction).
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20562
Summary: These instructions are fairly old and can be a little fancier and more clear in the context of modern Phabricator. Drop the reference to "HPHP", link the actual timezone list, wordsmith a little.
Test Plan: d( O_o )b
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20560
Summary:
See downstream <https://phabricator.wikimedia.org/T902>. Currently, timezones are rendered with their raw internal names (like `America/Los_Angeles`) which include underscores.
Replacing underscores with spaces is a more human-readable (and perhaps meaningfully better for things like screen readers, although this is pure speculation).
There's some vague argument against this, like "administrators may need to set a raw internal value in `phabricator.timezone` and this could mislead them", but we already give a pretty good error message if you do this and could improve hinting if necessary.
Test Plan: Viewed timezone list in {nav Settings} and the timezone "reconcile" dialog, saw a more-readable "Los Angeles".
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20559
Summary:
Ref T13289. See D20551. In D20551, I implemented some "CAN_INTERACT" checks against certain edits, but these checks end up testing "CAN_INTERACT" against objects like Conpherence threads which do not support a distinct "CAN_INTERACT" permission. I misrembered how the "CAN_INTERACT" fallback to "CAN_VIEW" actually works: it's not fully automatic, and needs some explicit "interact, or view if interact is not available" checks.
Use the "interact" wrappers to test these policies so they fall back to "CAN_VIEW" if an object does not support "CAN_INTERACT". Generally, objects which have a "locked" state have a separate "CAN_INTERACT" permission; objects which don't have a "locked" state do not.
Test Plan: Created and edited comments in Conpherence (or most applications other than Maniphest).
Reviewers: amckinley
Maniphest Tasks: T13289
Differential Revision: https://secure.phabricator.com/D20558
Summary:
Ref T13289. If you do this:
- Subscribe to a task (so we don't generate a subscribe side-effect later).
- Prepare a transaction group: sign with MFA, change projects (don't make any changes), add a comment.
- Submit the transaction group.
...you'll get prompted "Some actions don't have any effect (the non-change to projects), apply remaining effects?".
If you confirm, you get MFA'd, but the MFA flow loses the "continue" confirmation, so you get trapped in a workflow loop of confirming and MFA'ing.
Instead, retain the "continue" bit through the MFA.
Also, don't show "You can't sign an empty transaction group" if there's a comment.
See also T13295, since the amount of magic here can probably be reduced. There's likely little reason for "continue" or "hisec" to be magic nowadays.
Test Plan:
- Went through the workflow above.
- Before: looping workflow.
- After: "Continue" carries through the MFA gate.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13289
Differential Revision: https://secure.phabricator.com/D20552
Summary: Ref T11741. See PHI1276. After the switch to "Ferret", this table has no remaining readers or writers.
Test Plan:
- Ran `bin/storage upgrade -f`, no warnings.
- Grepped for class name, table name, `stemmedCorpus` column; got no relevant hits.
- Did a fulltext search.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11741
Differential Revision: https://secure.phabricator.com/D20549
Summary:
Ref T13289. This tightens up a couple of corner cases around locked threads.
Locking is primarily motivated by two use cases: stopping nonproductive conversations on open source installs (similar to GitHub's feature); and freezing object state for audit/record-keeping purposes.
Currently, you can edit or remove comments on a locked thread, but neither use case is well-served by allowing this. Require "CAN_INTERACT" to edit or remove a comment.
Administrators can still remove comments from a locked thread to serve "lock a flamewar, then clean it up", since "Remove Comment" on a comment you don't own is fairly unambiguously an administrative action.
Test Plan:
- On a locked task, tried to edit and remove my comments as a non-administrator. Saw appropriate disabled UI state and error dialogs (actions were disallowed).
- On a locked task, tried to remove another user's comments as an administrator. This works.
- On a normal task, edited comments normally.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13289
Differential Revision: https://secure.phabricator.com/D20551
Summary:
Ref T13289. See <https://discourse.phabricator-community.org/t/fatal-error-in-pagination-in-drydock-resources-host-logs-all-logs/2735>.
`bin/drydock lease` and the web UI for reviewing all object logs when there is more than one page of logs didn't get fully updated to the new cursors.
- Use a cursor pager in `bin/drydock lease`.
- Implement `withIDs()` in `LeaseQuery` so the default paging works properly.
Test Plan:
- Ran `bin/drydock lease`, got a lease with log output along the way.
- Set page size to 2, viewed host logs with multiple pages, paged to page 2.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13289
Differential Revision: https://secure.phabricator.com/D20553
Summary:
Depends on D20546. Ref T13283. Currently, if you do something (transactions "A", "B") and Herald does some things in response (transaction "C"), Herald acts only on the things you did ("A", "B") since the thing it did ("C") didn't exist yet, until it ran.
However, if you use the test console to test rules against the object we'll pick up all three transactions since they're all part of the same group. This isn't ideal.
To fix this, skip transactions which Herald applied, since it obviously didn't consider them when it was evaluating.
Test Plan:
- Created a revision, in the presence of a Herald rule that adds reviewers.
- Then, ran the revision through the test console.
- Before: saw the "Herald added reviewers: ..." transaction in the transaction group Herald evaluated.
- After: saw only authentic human transactions.
{F6464064}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13283
Differential Revision: https://secure.phabricator.com/D20547
Summary:
Ref T13283. Currently, each Editor sets its own group ID, so if you create a revision and then Herald does some stuff, the two groups of transactions get different group IDs.
This means the test console is slightly misleading (it will only pick up the Herald transactions). It's going to be misleading anyway (Herald obviously can't evaluate Herald transactions) but this is at least a little closer to reality and stops Herald actions from masking non-Herald actions.
Test Plan:
- Created a revision. Herald applied one transaction.
- Used the test console.
- Before: The test console only picked up the single most recent Herald transaction.
- After: The test console picked up the whole transaction group.
{F6464059}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13283
Differential Revision: https://secure.phabricator.com/D20546
Summary:
Ref T13289. When you create a Phriction document, you currently get an email with the whole new content as a "diff".
You also get extra transactions in the email and on the page.
This is because Phriction isn't on EditEngine and doesn't mark "create" transactions in a modern way. Get them marked properly to fix these obviously-broken behaviors. This can all go away once Phriction switches to EditEngine, although I don't have any particular plans to do that in the immediate future.
Test Plan:
- Created a new document, viewed email, no longer saw redundant "edited content" transaction or "CHANGES TO CONTENT" diff.
- Updated a document, viewed email, got interdiff.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13289
Differential Revision: https://secure.phabricator.com/D20548
Summary:
Ref T13290. Prior to recent changes, if we parsed some commit C which was associated with a revision R, but R was already closed, we'd skip the whole set of updates because the "close the revision" transaction would fail and we'd throw because we did not `setContinueOnNoEffect()`.
We now continue on no effect so we can get the edge ("commit has revision" / "revision has commit"), since we want it in all cases, but this means we may also apply an extra "Updated revision to reflect committed changes" transaction and new diff. This can happen even if we're careful about not trying to apply this transaction to closed revisions, since two workers may race. (Today, we aren't too careful about this.)
To fix this, just make this transaction no-op itself if the revision is already closed by the time it tries to apply.
This happened on D20451 because a merge commit with the same hash as the last diff was pushed, but it's easiest to reproduce by just running `bin/repository reparse --message <commit>`, which updates related revisions with a new diff every time.
Test Plan:
- Ran `bin/repository reparse --messsage <commit>` several times, on a commit with an associated revision.
- Before: each run attached a new diff and created a new "updated to reflect committed changes" transaction.
- After: repeated runs had no effects.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13290
Differential Revision: https://secure.phabricator.com/D20545
Summary:
Ref T13290. Ref T13291. Now that a full URI is a "mention", the full URI in "Differential Revision: ..." also triggers a mention.
Stop it from doing that, since these mentions are silly/redundant/unintended.
The API here is also slightly odd; simplify it a little bit to get rid of doing "append" with "get + append + set".
Test Plan: Used `bin/repository reparse --publish` to republish commits with "Differential Revision: ..." and verified that the revision PHID was properly dropped from the mention list.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13291, T13290
Differential Revision: https://secure.phabricator.com/D20544
Summary:
See PHI1222. When we publish several transactions to feed at once, we sort them by "action strength" to figure out which one gets to be the title story.
This sort currently uses `msort()`, which uses `asort()`, which is not a stable sort and has inconsistent behavior across PHP versions:
{F6463721}
Switch to `msortv()`, which is a stable sort. Previously, see also T6861.
If all transactions have the same strength, we'll now consistently pick the first one.
This probably (?) does not impact anything in the upstream, but is good from a consistency point of view.
Test Plan:
Top story was published after this change and uses the chronologically first transaction as the title story.
Bottom story was published before this change and uses the chronologically second transaction as the title story.
Both stories have two transactions with the same strength ("create" + "add reviewer").
{F6463722}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20540
Summary:
Ref T13279. See that task for some discussion.
The accumulations of some of the datasets may be negative (e.g., if more tasks are moved out of a project than into it) which can lead to negative area in the stacked chart.
Introduce `min(...)` and `max(...)` to separate a function into points above or below some line, then mangle the areas to pick the negative and positive regions apart so they at least have a plausible physical interpretation and none of the areas are negative.
This is presumably not a final version, I'm just trying to produce a chart that isn't a sequence of overlapping regions with negative areas that is "technically" correct but not really possible to interpret.
Test Plan: {F6439195}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20506
Summary:
Ref T13279. Currently, we store a fairly low-level description of functions and datasets in a chart. This will create problems with (for example) translating function labels.
If you view a chart someone links you, it should say "El Charto" if you speak Spanish, not "The Chart" if the original viewer speaks English.
To support this, store a slightly higher level version of the chart: the chart engine key, plus configuration parameters. This is very similar to how SearchEngine works.
For example, the burndown chart now stores a list of project PHIDs, instead of a list of `[accumulate [sum [fact task.open <project-phid>]]]` functions.
(This leaves some serialization code with no callsites, but we may eventually have a "CustomChartEngine" which stores raw functions, so I'm leaving it for now.)
As a result, function labels provided by the chart engine are now translatable.
(Note that the actual chart is meaningless since the underlying facts can't be stacked like they're being stacked, as some are negative in some areas of their accumulation.)
Test Plan: {F6439121}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20504
Summary:
Ref T13279. Replace the hard-coded default range with a range computed by examining the chart data.
Instead of having a "Dataset" return a blob of wire data, "Dataset" now returns a structure with raw wire data plus a range. I expect to add more structured data here in future changes (tooltip/hover event data, maybe function labels).
Test Plan: {F6439101}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20503
Summary: Ref T13279. Slightly simplify domain handling by putting all the "[x, y]" stuff in an Interval class. I'm planning to do something similar for ranges next, so this should make that easierr.
Test Plan: Viewed chart, saw same chart as before.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20502
Summary: Ref T13279. Makes charts incrementally more useful by allowing the server to provide labels and colors for functions.
Test Plan: {F6438872}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20501
Summary:
Ref T13279. Adds client-side support for rendering function labels on charts, then labels every function as important data.
Works okay on mobile, although I'm not planning to target mobile terribly heavily for v0.
Test Plan: {F6438860}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20500
Summary:
Ref T13279. This adds support for:
- Datasets can have types, like "stacked area".
- Datasets can have multiple functions.
- Charts can store dataset types and datasets with multiple functions.
- Adds a "stacked area" dataset.
- Makes D3 actually draw a stacked area chart.
Lots of rough edges here still, but the result looks slightly more like it's supposed to look.
D3 can do some of this logic itself, like adding up the area stacks on top of one another with `d3.stack()`. I'm doing it in PHP instead because I think it's a bit easier to debug, and it gives us more options for things like caching or "export to CSV" or "export to API" or rendering a data table under the chart or whatever.
Test Plan: {F6427780}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20498
Summary:
Ref T13279. Old D3 seems perfectly fine, but most of the good references seem to have been written by people who update D3 more than once every 10 years (???).
This requires some minor API changes, see next diff.
Test Plan: See next diff.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20497
Summary:
Ref T13279. For now, we need to render burndowns from both Maniphest (legacy) and Projects (new prototype).
Consolidate this logic into a "BurndownChartEngine". I plan to expand this to work a bit like a "SearchEngine", and serve as a UI layer on top of the raw chart features.
The old "ChartEngine" is now "ChartRenderingEngine".
Test Plan:
- Viewed burndowns ("burnups") in Maniphest.
- Viewed burndowns in Projects.
- Saw the same chart.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20496
Summary:
Ref T13279. Since the use cases that have made it upstream are all for relatively complex charts (e.g., requiring aggregation and composition of multiple data series in nontrivial ways) I'm currently looking at an overall approach like this:
- At least for now, Charts provides a low-level internal-only API for composing charts from raw datasets.
- This is exposed to users through pre-built `SearchEngine`-like interfaces that provide a small number of more manageable controls (show chart from date X to date Y, show projects A, B, C), but not the full set of composition features (`compose(scale(2), cos())` and such).
- Eventually, we may put more UI on the raw chart composition stuff and let you build your own fully custom charts by gluing together datasets and functions.
- Or we may add this stuff in piecemeal to the higher-level UI as tools like "add goal line" or "add trend line" or whatever.
This will let the low-level API mature/evolve a bit before users get hold of it directly, if they ever do. Most requests today are likely satisfiable with a small number of chart engines plus raw API data access, so maybe UI access to flexible charting is far away.
Step toward this by adding a "Reports" section to projects. For now, this just renders a basic burnup for the current project. Followups will add an "Engine" layer above this and make the chart it produces more useful.
Test Plan: {F6426984}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20495
Summary:
Depends on D20488. Ref T13279. When installs run `bin/phd start`, start the fact daemon alongside other daemons.
Since "Reports" in Maniphest now relies on Facts data, populate it.
Test Plan: Ran `bin/phd start`, saw the Fact daemon start.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20489
Summary: Depends on D20487. If you `min(1, 2, null)`, you get `null`. We want `1`.
Test Plan: Viewed a "burnup for project X" chart where one dataseries had no datapoints. Saw a sensible domain selected automatically.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Differential Revision: https://secure.phabricator.com/D20488
Summary: Depends on D20486. Ref T13279. Now that the "Reports" UI uses a panel to draw a real chart from Facts, throw away the copy of the old code.
Test Plan: `grep`
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20487
Summary:
Depends on D20485. Ref T13279. This removes the ad-hoc charting in Maniphest and replaces it with a Facts-based chart.
(To do this, we build a dashboard panel inline and render it.)
Test Plan: {F6412720}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20486
Summary:
Depends on D20484. Ref T13279. Allows a chart to render as a panel.
Configuring these is currently quite low-level (you have to manually copy/paste a chart key in), but works well enough.
Test Plan: {F6412708}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20485
Summary:
Ref T13279. This changes the chart controller:
- if we have no arguments, build a demo chart and redirect to it;
- otherwise, load the specified chart from storage and render it.
This mostly prepares for "Chart" panels on dashboards.
Test Plan: Visited `/fact/chart/`, got redirected to a chart from storage.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20483
Summary: Depends on D20538. Ref T13291. We now recognize full source URIs, but encoding full URIs isn't super human-friendly and we can't do stuff like relative links with them. Add `{src ...}` as a way to get to this behavior that supports options and more flexible syntax.
Test Plan: {F6463607}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13291
Differential Revision: https://secure.phabricator.com/D20539
Summary:
Depends on D20530. Ref T13291. When users paste links to files in Diffusion into remarkup contexts, identify them and specialize the rendering.
When the URIs are embedded with `{...}`, parse them in more detail.
This is a lead-up to a `{src ...}` rule which will use the same `View` but give users more options to customize presentation.
Test Plan: {F6463580}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13291
Differential Revision: https://secure.phabricator.com/D20538
Summary:
Ref T13289. In Maniphest, you can currently search for "Owner: none()" to find tasks with no owner, but there's no way to search for "Reviewers: none()" in Differential right now.
Add support for this, since it's consistent and reasonable and doesn't seem too weird or niche.
Test Plan: Searched for "Reviewers: none()", found revisions with no reviewers. Searched for "Reviewers: alice, none()", "Reviewers: alice", and "Reviewers: <no constraint>" and got sensible results.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13289
Differential Revision: https://secure.phabricator.com/D20537
Summary: Depends on D20534. Ref T13294. Add export support so you can dump these out, print them on paper, notarize them, and store them in a box under a tree or whatever.
Test Plan: Exported transactions to a flat file, read the file.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13294
Differential Revision: https://secure.phabricator.com/D20535
Summary: Depends on D20533. Allow querying for transactions of a specific object type, so you can run queries like "Show all edits to Herald rules between date X and Y".
Test Plan: {F6463478}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20534
Summary: Depends on D20531. Ref T13294. Enable finding raw transactions in particular date ranges or with particular authors.
Test Plan: {F6463471}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13294
Differential Revision: https://secure.phabricator.com/D20533
Summary:
Ref T13294. An install is interested in a way to easily answer audit-focused questions like "what edits were made to any Herald rule in Q1 2019?".
We can answer this kind of question with a more granular version of feed that focuses on being exhaustive rather than being human-readable.
This starts a rough version of it and deals with the two major tricky pieces: transactions are in a lot of different tables; and paging across them is not trivial.
To solve "lots of tables", we just query every table. There's a little bit of sleight-of-hand to get this working, but nothing too awful.
To solve "paging is hard", we order by "<dateCreated, phid>". The "phid" part of this order doesn't have much meaning, but it lets us put every transaction in a single, stable, global order and identify a place in that ordering given only one transaction PHID.
Test Plan: {F6463076}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13294
Differential Revision: https://secure.phabricator.com/D20531
Summary:
See PHI1268. We currently do some weird width handling when rendering Diffusion readmes in a document directory view.
I think this came from D12330, which used `PHUIDocumentViewPro` to change the font, but we later reverted the font and were left with the `DocumentView`. Other changes after that modified `DocumentView` to have fixed-width behavior, but it doesn't make much sense here since the content panel is clearly rendered full-width.
Today, the `DocumentView` is a more structural element with methods like `setCurtain()`. Just get rid of it to simplify things, at least as a first step.
Test Plan:
Before:
{F6463493}
After:
{F6463492}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20536
