This makes no functional difference in the generated configure
(at least with the Autotools versions I have installed) but this
change might prevent future bugs like the one that was just
fixed in the commit 5a5bd7f871.
This is broken in the releases 5.2.6 to 5.4.2. A workaround
for these releases is to pass EGREP='grep -E' as an argument
to configure in addition to --disable-threads.
The problem appeared when m4/ax_pthread.m4 was updated in
the commit 6629ed929c which
introduced the use of AC_EGREP_CPP. AC_EGREP_CPP calls
AC_REQUIRE([AC_PROG_EGREP]) to set the shell variable EGREP
but this was only executed if POSIX threads were enabled.
Libtool code also has AC_REQUIRE([AC_PROG_EGREP]) but Autoconf
omits it as AC_PROG_EGREP has already been required earlier.
Thus, if not using POSIX threads, the shell variable EGREP
would be undefined in the Libtool code in configure.
ax_pthread.m4 is fine. The bug was in configure.ac which called
AX_PTHREAD conditionally in an incorrect way. Using AS_CASE
ensures that all AC_REQUIREs get always run.
Thanks to Frank Busse for reporting the bug.
Fixes: https://github.com/tukaani-project/xz/issues/45
In the C99 and C17 standards, section 6.5.6 paragraph 8 means that
adding 0 to a null pointer is undefined behavior. As of writing,
"clang -fsanitize=undefined" (Clang 15) diagnoses this. However,
I'm not aware of any compiler that would take advantage of this
when optimizing (Clang 15 included). It's good to avoid this anyway
since compilers might some day infer that pointer arithmetic implies
that the pointer is not NULL. That is, the following foo() would then
unconditionally return 0, even for foo(NULL, 0):
void bar(char *a, char *b);
int foo(char *a, size_t n)
{
bar(a, a + n);
return a == NULL;
}
In contrast to C, C++ explicitly allows null pointer + 0. So if
the above is compiled as C++ then there is no undefined behavior
in the foo(NULL, 0) call.
To me it seems that changing the C standard would be the sane
thing to do (just add one sentence) as it would ensure that a huge
amount of old code won't break in the future. Based on web searches
it seems that a large number of codebases (where null pointer + 0
occurs) are being fixed instead to be future-proof in case compilers
will some day optimize based on it (like making the above foo(NULL, 0)
return 0) which in the worst case will cause security bugs.
Some projects don't plan to change it. For example, gnulib and thus
many GNU tools currently require that null pointer + 0 is defined:
https://lists.gnu.org/archive/html/bug-gnulib/2021-11/msg00000.htmlhttps://www.gnu.org/software/gnulib/manual/html_node/Other-portability-assumptions.html
In XZ Utils null pointer + 0 issue should be fixed after this
commit. This adds a few if-statements and thus branches to avoid
null pointer + 0. These check for size > 0 instead of ptr != NULL
because this way bugs where size > 0 && ptr == NULL will likely
get caught quickly. None of them are in hot spots so it shouldn't
matter for performance.
A little less readable version would be replacing
ptr + offset
with
offset != 0 ? ptr + offset : ptr
or creating a macro for it:
#define my_ptr_add(ptr, offset) \
((offset) != 0 ? ((ptr) + (offset)) : (ptr))
Checking for offset != 0 instead of ptr != NULL allows GCC >= 8.1,
Clang >= 7, and Clang-based ICX to optimize it to the very same code
as ptr + offset. That is, it won't create a branch. So for hot code
this could be a good solution to avoid null pointer + 0. Unfortunately
other compilers like ICC 2021 or MSVC 19.33 (VS2022) will create a
branch from my_ptr_add().
Thanks to Marcin Kowalczyk for reporting the problem:
https://github.com/tukaani-project/xz/issues/36
On MicroBlaze, GCC 12 is broken in sense that
__has_attribute(__symver__) returns true but it still doesn't
support the __symver__ attribute even though the platform is ELF
and symbol versioning is supported if using the traditional
__asm__(".symver ...") method. Avoiding the traditional method is
good because it breaks LTO (-flto) builds with GCC.
See also: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101766
For now the only extra symbols in liblzma_linux.map are the
compatibility symbols with the patch that spread from RHEL/CentOS 7.
These require the use of __symver__ attribute or __asm__(".symver ...")
in the C code. Compatibility with the patch from CentOS 7 doesn't
seem valuable on MicroBlaze so use liblzma_generic.map on MicroBlaze
instead. It doesn't require anything special in the C code and thus
no LTO issues either.
An alternative would be to detect support for __symver__
attribute in configure.ac and CMakeLists.txt and fall back
to __asm__(".symver ...") but then LTO would be silently broken
on MicroBlaze. It sounds likely that MicroBlaze is a special
case so let's treat it as a such because that is simpler. If
a similar issue exists on some other platform too then hopefully
someone will report it and this can be reconsidered.
(This doesn't do the same fix in CMakeLists.txt. Perhaps it should
but perhaps CMake build of liblzma doesn't matter much on MicroBlaze.
The problem breaks the build so it's easy to notice and can be fixed
later.)
Thanks to Vincent Fazio for reporting the problem and proposing
a patch (in the end that solution wasn't used):
https://github.com/tukaani-project/xz/pull/32
tuklib_physmem depends on GetProcAddress() for both MSVC and MinGW-w64
to retrieve a function address. The proper way to do this is to cast the
return value to the type of function pointer retrieved. Unfortunately,
this causes a cast-function-type warning, so the best solution is to
simply ignore the warning.
Calling coder_set_compression_settings() in list mode with verbose mode
on caused the filter chain and memory requirements to print. This was
unnecessary since the command results in an error and not consistent
with other formats like lzma and alone.
This is similar to 2ce4f36f17.
The actual initialization of the variables is done inside
mythread_sync() macro. Clang doesn't seem to see that
the initialization code inside the macro is always executed.
clang and gcc differ in how they handle -Wformat-nonliteral. gcc will
allow a non-literal format string as long as the function takes its
format arguments as a va_list.
This is combined from the following commits in the master branch:
443dfebced6b117d3b1f5e34774c31
Thanks to Iouri Kharon for the bug report, the original patch,
and testing.
The command line tools cannot be built with MSVC for now but
they can be built with MinGW-w64.
Thanks to Iouri Kharon for the bug report and the original patch.
The code that parses --memlimit options and --block-list modified
the argv[] when parsing the option string from optarg. This was
visible in "ps auxf" and such and could be confusing. I didn't
understand it back in the day when I wrote that code. Now a copy
is allocated when modifiable strings are needed.
The API docs gave an impression that such checks are done
but they actually weren't done. In practice it made little
difference since the calling code has a bug if these are NULL.
Thanks to Jia Tan for the original patch that checked for
block->filters == NULL.
If someone sets up Clang to define __GNUC__ to 10 or greater
then symvers broke. __has_attribute is supported by such GCC
and Clang versions that don't support __symver__ so this should
be much better and simpler way to detect if __symver__ is
actually supported.
Thanks to Tomasz Gajc for the bug report.
It not only makes no sense to put symbol versions into a static library
but it can also cause breakage.
By default Libtool #defines PIC if building a shared library and
doesn't define it for static libraries. This is documented in the
Libtool manual. It can be overriden using --with-pic or --without-pic.
configure.ac detects if --with-pic or --without-pic is used and then
gives an error if neither --disable-shared nor --disable-static was
used at the same time. Thus, in normal situations it works to build
both shared and static library at the same time on GNU/Linux,
only --with-pic or --without-pic requires that only one type of
library is built.
Thanks to John Paul Adrian Glaubitz from Debian for reporting
the problem that occurred on ia64:
https://www.mail-archive.com/xz-devel@tukaani.org/msg00610.html
This time it can happen when lzma_stream_encoder_mt() is used
to reinitialize an existing multi-threaded Stream encoder
and one of 1-4 tiny allocations in lzma_filters_copy() fail.
It's very similar to the previous bug
10430fbf38, happening with
an array of lzma_filter structures whose old options are freed
but the replacement never arrives due to a memory allocation
failure in lzma_filters_copy().
The documentation mentions that lzma_block_encoder() supports
LZMA_SYNC_FLUSH but it was never added to supported_actions[]
in the internal structure. Because of this, LZMA_SYNC_FLUSH could
not be used with the Block encoder unless it was the next coder
after something like stream_encoder() or stream_encoder_mt().
