This repository has been archived on 2024-10-17. You can view files and clone it, but cannot push or open issues or pull requests.
MahiroOS-jhalfs/README.BLFS

376 lines
18 KiB
Text
Raw Permalink Normal View History

2006-08-13 20:21:55 +02:00
1. INTRODUCTION::
2007-07-05 20:37:13 +02:00
To automate package builds from the BLFS book instructions is a huge
task. Some of the issues are: the BLFS book isn't linear; some package
pages use a custom layout; there are circular dependencies; several
packages can be installed on a non-default prefix; build commands can
change based on what dependencies will be used, etc.
2006-08-13 20:21:55 +02:00
2007-07-05 20:37:13 +02:00
That being said, the goal of the blfs-tool is to help you solve package
dependencies, create build scripts and a Makefile. Not all the auto-generated
2007-07-05 20:37:13 +02:00
build scripts and Makefile will work "as is", thus, as a general rule,
you will need to review and edit the scripts while reading the book.
2006-08-13 20:21:55 +02:00
The blfs tools allow also to update packages from the LFS book. LFS
packages which may be updated appear in the menu interface. When selected,
their scriptlet is generated in the same manner as for BLFS packages.
(TODO: presently, when an LFS package needs a patch, you'll have to
donwload it manually to your $SRC_ARCHIVE directory (usually /sources)).
2006-08-13 20:21:55 +02:00
2006-08-24 22:38:22 +02:00
2. PREREQUISITES::
2017-03-27 21:49:04 +02:00
In addition to a full LFS system, the following packages and their
dependencies are needed by this tool:
- required: libxml2, libxslt, DocBook XML DTD
- recommended: wget (to download the package tarballs) and sudo (to build
as a user)
- optional: lynx (allows to read the generated linearized book), GPM (to
cut and paste commands from the book), git (to update the book
sources)
2017-03-27 21:49:04 +02:00
Note that the optional dependencies are recommended for ease of use of the
tool.
You should also have the following personal skills:
- Ability to write and debug shell scripts: as said in the introduction,
not all the generated scripts can be used directly. They need to be
edited to produce an error free build.
- Ability to debug build failures, like missing dependencies or
installation directories not known to the system (when you install in
/opt for example).
- Ability to choose the tools you need to configure and administrate
your system: in the BLFS book, nothing is mandatory, nothing is
useless. You are on your own in choosing what to build, but wrong
decisions may lead to a non functional system...
3. INSTALL::
There are two ways to install the BLFS tools on an LFS system, described
in paragraphs 3.1 and 3.2, respectively:
3.1 INSTALLATION ON A RUNNING SYSTEM
Select "Use Book --> Beyond Linux From Scratch" in the jhalfs menu:
The tools are installed in $HOME$BLFS_ROOT (the default for $BLFS_ROOT
is /blfs_root). The BLFS book is downloaded or copied to its directory.
The tracking directory (see below) is created (if it does not already
exist) and initialized. Before running "make", you should ensure the
tracking directory (default location /var/lib/jhalfs/BLFS) can be:
- either created by the user running "make", if it does not exist
- or that it is writable by the user running "make", if it exists.
After the intallation, you should perform the following additional steps:
- Configure sudo, adding the needed privileges for the user.
2017-03-27 21:49:04 +02:00
- Although it is not strictly necessary, it is recommended to install
the bash shell startup files (as per `3. After LFS Configuration
2017-03-27 21:49:04 +02:00
Issues' of the BLFS book), as some instructions in BLFS rely on
their being present.
- At this point, the tool has no way to know which versions of LFS packages
are installed, so that the menu interface will show all the LFS packages,
as if they were not installed. If you have a released version of LFS, or
2021-04-29 11:17:57 +02:00
the date of your GIT version of LFS is known, you should run the
update-lfs.sh script. If you have updated some
LFS packages since first installation, or have been using a custom
working copy of the LFS book, the only (tedious) way is to create
empty files with names <package>-<installed-version> in the tracking
directory, and run the tool.
- If you have also installed some BLFS packages, they are not in the
tracking file. The only way is to create empty files with names
<package>-<installed-version> in the tracking directory, and run the tool.
3.2 INSTALLATION ON A JUST BUILT LFS SYSTEM
2017-03-27 21:49:04 +02:00
For books that support it (only LFS),
2017-03-27 21:49:04 +02:00
there is an option to install the BLFS tools right after building
the LFS system: just tick `BOOK Settings/Add blfs-tool support' in
2017-03-27 21:49:04 +02:00
jhalfs configuration menu. The tools are installed in $BLFS_ROOT
(default /blfs_root) on the LFS system, and the dependencies are built
2017-03-27 21:49:04 +02:00
at the end of the jhalfs run, before the custom tools.
After booting the new LFS system some steps are needed to finish
2017-03-27 21:49:04 +02:00
the installation of the automated tools:
- A user account must be created. You must be logged on that user
account to use blfs-tool. This is not strictly necessary,
since the packages can be built as root, too, but it is
never a good idea to build packages as root.
- Move /blfs-root to that user's home and change ownership of the
directory and files to the user.
- Give the user read and write privileges over the $TRACKING_DIR
directory and the files that it contains.
- Configure sudo and add the bash shell startup files, as described
above
- Note that the versions of LFS packages are automatically known to
the tool in this case, and there is no need to run the update-lfs.sh
script.
We assume that the BLFS tools will be used on a booted LFS system.
2017-03-27 21:49:04 +02:00
Using them to build BLFS packages in a chroot jail is also possible,
but not supported.
3.3 DIRECTORY LAYOUT IN THE $BLFS_ROOT DIRECTORY
blfs-xml/* GIT tree of the selected BLFS book version
lfs-xml/* GIT tree of the selected LFS book version
lib/constants.inc functions libraries
/func_dependencies for building the dependency tree
menu/* menuconfig source code
xsl/gen_pkg_list.xsl XSL stylesheet to generate the package database
/gen_config.xsl XSL stylesheet to generate the Config.in file
for use in the menuconfig system
/dependencies.xsl XSL stylesheet to generate the dependency list
of a package
/make_book.xsl XSL stylesheet to generate the linear book.xml
/lfs_make_book.xsl XSL stylesheet to incoporate LFS pages into the
linear book.xml
/scripts.xsl XSL stylesheet to generate the scriptlets from
book.xml
/bump.xsl XSL stylesheet to update the tracking file
/process-install.xsl XSL stylesheet included by scripts.xsl, for
outputting cleanly install instructions
/process-replaceable.xsl XSL stylesheet included by scripts.xsl, for
generating correct instructions when a
<replaceable> tag is encountered.
README.BLFS this file
TODO developers notes (well, not updated often)
gen_pkg_book.sh resolves dependencies, generates a linear BLFS
book, and finally generates build scripts
gen-makefile.sh generates the target Makefile
progress_bar.sh the target Makefile progress bar
gen-special.sh Helper script for generating the package
database
Makefile Used by make to update the package database
from the GIT tree, then launch the menuconfig
interface, and run gen_pkg_book.sh based on
configuration settings
packdesc.dtd a simple DTD describing the format of the
package database and the tracking file.
Working files: several files are generated when first running the tool:
packages.xml auto-generated package database
Config.in input file for the menu driven choices
configuration file generated by the menuconfig process
dependencies/* files recording the dependency tree
book.xml the linearized book
book-html/* the linearized book rendered in html
scripts/* the scriptlets
2006-08-13 20:21:55 +02:00
2017-03-27 21:49:04 +02:00
3.4 INSTALLED PACKAGES TRACKING SYSTEM:
This tool includes a very simple tracking system to log which packages
have been installed using the tool. It is used to skip installed packages
from target selection menu and to test if an installed package has been
updated in the BLFS book. Do not rely on this feature as a package
management tool.
The tracking system itself is an XML file: instpkg.xml. It is
initialized when <make> is first run in blfs_root. It resides in a
directory, which is created when needed during the process of building
custom tools or blfs dependencies, right after LFS. You can specify
2017-03-27 21:49:04 +02:00
that directory location in the blfs-tools sub-menu of jhalfs. You may
need to update permissions and/or ownership of this directory before
using the blfs tool (see README in jhalfs).
The default location of the tracking directory is /var/lib/jhalfs/BLFS.
NB : after the initial build, that directory is only used to contain
instpkg.xml, unless custom tools have been built. In the latter case,
it also contains empty files whose name are "$PKG-$VERSION" for each
versionned package built. The information about those packages is
included into instpkg.xml the next time the tool is run.
4. USAGE::
2006-08-13 20:21:55 +02:00
From now on, all the work must be done from inside the installation
root directory.
Due to the complexity of the BLFS book, the scripts and Makefile
generation is done in several steps:
2006-10-07 20:19:09 +02:00
2017-03-27 21:49:04 +02:00
4.1 UPDATING BOOK SOURCES::
2006-08-24 22:38:22 +02:00
2007-07-05 20:37:13 +02:00
If you are using the development book version and you want to update
installed packages to the latest version found in that book, you need to
update the XML sources and packages database. To do that, run
"make update". This is not necessary if you just built LFS, and you
can skip to step 4.2.
2006-08-24 22:38:22 +02:00
2006-10-07 20:19:09 +02:00
On the next configuration run, packages already installed but listed
2007-07-05 20:37:13 +02:00
with a new version in the book will be available for target selection
and used to solve dependencies.
2006-10-07 20:19:09 +02:00
2017-03-27 21:49:04 +02:00
4.2 CONFIGURING AND PARSING THE BOOK::
2006-08-13 20:21:55 +02:00
2007-07-05 20:37:13 +02:00
The next step is to create a book and build scripts in dependency
build order for one or several packages.
2006-10-07 20:19:09 +02:00
Run <make> to launch the configuration interface. The main menu contains
four blocks: individual package selection, Build settings, Build layout,
and Optimization.
In the package selection block, menus and submenus are organized
as the book's parts, chapters and sections. You can navigate those menus
and select as many targets as you want. But we suggest to not select
too many at a time to be able to sort issues!
In the "Build settings" submenu, the dependency level and default
packages used to solve alternatives are set (currently, only for the MTA).
You can also select whether the build will be made as a normal user or as
root, whether to use "porg style" package management, whether to remove
".la" files, and wheter statistics for the package are generated (build
time, memory footprint and "DESTDIR" install). If you use package
management, you have to enter the path to the packInstall.sh script too.
In the "Build layout" submenu, you can select where the source tarballs
reside and are downloaded, where the packages are built, and whether to
keep the build tree after installation.
In the "Optimization" submenu, you can select the number of parallel
jobs, and set the usual CFLAGS, CXXFLAGS, and LDFLAGS. the special
keyword "EMPTY" can be used for those flags to ensure they are unset.
Note that there are help strings associated to those menus. Please
read them for details!
Those settings are saved to be reused in future configuration runs.
2017-03-01 12:01:27 +01:00
When you are done with the menu, a few checks occur, and the dependency
chain is generated. Each dependency appears with its priority (required,
recommended, optional, or external), and it's level. There is a root level
2017-03-19 22:08:18 +01:00
1. The selected packages have level 2. The dependencies of selected packages
have level 3, the dependencies of the dependencies have level 4, and so on.
2017-03-01 12:01:27 +01:00
When circular dependencies are found, they appear with a priority of
"circular". This means that two (or more) dependency chains arrive at the
same package. The algorithm chooses the chain with the highest priority and
reorders dependencies to remove the other chain(s). This is not always the
solution an user would prefer, but we have found no way to do it better.
You end up with a book.xml file which contains the linearized book,
and a rendered HTML, in the directory book-html, which you can browse with
"lynx book-html/index.html" (or with any other browser).
Furthermore, there is a directory "scripts", which contains the generated
scriptlets.
There is yet another directory, "dependencies" that contains files
generated while resolving dependencies.
2017-03-27 21:49:04 +02:00
4.3 EDITING BUILD SCRIPTS::
Now it is time to review the generated book and scripts, making any
changes to the scripts necessary to fix generation bugs or to suit your
needs.
2006-08-13 20:21:55 +02:00
2006-08-24 22:38:22 +02:00
Scripts for additional packages (i.e., for non-BLFS packages) can be
2007-07-05 20:37:13 +02:00
easily inserted. For example, if you want to install the external dependency
"bar" before "foo" package and the "foo" script is named "064-z-foo", you
just need to create a "064-y-bar" build script.
2006-08-13 20:21:55 +02:00
Remember, the package tracking system isn't a package management tool
2007-07-05 20:37:13 +02:00
and knows nothing about packages not in the BLFS book.
2006-08-24 22:38:22 +02:00
2017-03-27 21:49:04 +02:00
4.4 CREATING THE MAKEFILE::
2006-10-07 20:19:09 +02:00
When the build scripts are ready to be run, the Makefile can be
created. Create an empty subdirectory (for example "mkdir work") and cd
to that directory. Then run ../gen-makefile.sh. Note that the directory
is completely emptied before generating the Makefile, so to prevent
erasing useful data, the script ensures that the name of the current
working directory starts with "work".
2006-08-13 20:21:55 +02:00
Review the Makefile, and, if all looks sane, start the build by running
"make".
2006-08-13 20:21:55 +02:00
2017-03-27 21:49:04 +02:00
5. GENERATED BUILD SCRIPTS ISSUES::
2007-07-05 20:37:13 +02:00
In this section, known issues with the generated build scripts are
discussed. They are due to build procedures and/or BLFS layout
particularities that we can't handle. In several cases, editing the
build scripts is mandatory.
2017-03-01 12:01:27 +01:00
You may also need to insert some build scripts created by you to resolve
unhandled dependencies and/or to remove some script installing an unneeded
package (unneeded packages may be pulled in the dependency chain, if
they occur as an "or" with another package).
When there are circular dependencies (only one known in BLFS 8.0 for
recommended dependencies), you may need to move around scripts so that they
run in the order script-A script-B script-A. This involves copying script-A
to another name (using the xxx-a- fields), and possibly renaming the xxx-a-
fields of each involved script.
2017-03-27 21:49:04 +02:00
5.1 BLFS BOOTSCRIPTS::
2017-03-01 12:01:27 +01:00
Normally, bootscript installation should work. On the other hand, the
book does not give instruction for running them, so you might have to
manually insert "/etc/init.d/rc.d/<initscript> start" at some place during
the build.
2017-03-27 21:49:04 +02:00
5.2 PACKAGE CONFIGURATION::
2017-03-01 12:01:27 +01:00
For those packages that have a "Configuration" section, you should
edit the build script to fit the needs of your system. Sometimes, the
bash startup files are modified. The generated scripts contain a
2017-03-01 12:01:27 +01:00
line 'source /etc/profile', which ensures that the proper environment
variables are used.
2017-03-27 21:49:04 +02:00
5.3 PAGES WITH TWO OR MORE PACKAGES::
2017-03-01 12:01:27 +01:00
For example: sane, poppler, audacious, freetts, which, etc.
On the pages for those packages, the BLFS book actually has instructions
to download and install two or more packages. You must edit the scripts to
2017-03-01 12:01:27 +01:00
fix this. A common pitfall is that the variable PACKAGE may be used for
several tarballs. Be sure to save the PACKAGE variable to some other
name (for example PKG1, PKG2, etc) after each download. The unpacking
instructions may need to be repeated for each tarball in turn.
2017-03-27 21:49:04 +02:00
5.4 XORG7
2006-08-24 22:38:22 +02:00
2017-03-01 12:01:27 +01:00
The book has special page layouts for the Xorg7 packages. The tool
breaks those pages into individual pages for each packages in the linear
book. Also, the menu gives the choice to select each package individually.
To build the whole Xorg7 chapter, select xinit. The (recommended)
2017-03-01 12:01:27 +01:00
dependency chain brings in the whole set of Xorg packages.
2006-08-24 22:38:22 +02:00
2017-03-27 21:49:04 +02:00
5.5 PATCHES
2006-08-24 22:38:22 +02:00
Please, make sure that all scripts have the commands to download/apply
the required patches. Due to book layout issues, some patches may be
2017-03-01 12:01:27 +01:00
missing (as of BLFS 8.0, all the patches seem to be downloaded).
2006-08-24 22:38:22 +02:00
2017-03-27 21:49:04 +02:00
5.6 ROOT COMMANDS
2006-08-24 22:38:22 +02:00
2007-07-05 20:37:13 +02:00
If building as a normal user (the default setting), be sure that all
commands that require root privileges are run using sudo. Also make sure
necessary root privilege commands are visible in your PATH. The scripts
ensure that /usr/sbin is appended to the user's PATH when running
privileged commands.
2017-03-01 12:01:27 +01:00
For commands necessitating root privileges, the generated scripts wrap
them with the construct:
sudo -E sh -e << ROOT_EOF
<commands to be executed as root with `$', ``', and `\' escaped>
ROOT_EOF
The "-e" switch to sh ensures the command block exits with error if an
error occurs. The "-E" switch to sudo ensures the whole environment is
passed to the commands to be run with root privileges. It is effective
only if the /etc/sudoers file contains `Defaults setenv', or SETENV in
the user attributes (this is implicit if the command the user is allowed
to run is `ALL'). If you think it is a security issue, you may forbid
this flag in /etc/sudoers, but then, you have to un-escape `$' for
variables coming from the environment in the instructions. Although this
construct is rather strong, it can fail in some corner cases, so
carefully review those instructions.
2017-03-01 12:01:27 +01:00
2007-07-05 20:37:13 +02:00
Due to book layout issues, some sudo commands may be missing.
2006-08-24 22:38:22 +02:00
2017-03-27 21:49:04 +02:00
5.7 OTHERS
2007-07-05 20:37:13 +02:00
There may be other issues that we are not aware of. If you find
any, please report it to <alfs-discuss@linuxfromscratch.org>.