This repository has been archived on 2024-10-17. You can view files and clone it, but cannot push or open issues or pull requests.
MahiroOS-jhalfs/BLFS/gen-special.sh

283 lines
11 KiB
Bash
Raw Normal View History

#!/bin/bash
# $Id$
#-------------------------------------------------------------------------
# generates an xsl stylesheet containing a template for special
# cases in the book:
# - If the version does not begin with a number, it is impossible to know
# where the package name ends and where the version begins. We therefore
# use the ENTITY at the beginning of the validated full-xml.
# - If a package is part of a group of xorg packages (proto, fonts, etc)
# there is no easy way to extract it from the xml. We use the ENTITY at
# the top of each file x7*.xml
# - Some non-versioned packages are needed as dependencies of others: we
# attribute version 1.0.0 to them. It is just used to know if the package
# is installed, by checking inst-version.
# - If a package is versioned but the version is not mentioned in the book
# (currently only udev), we retrieve the version by other means
#-------------------------------------------------------------------------
# Arguments:
# $1 contains the name of the validated xml book
# $2 contains the name of the ouput xsl file
# $3 contains the name of the book sources directory
#-------------------------------------------------------------------------
BLFS_XML=$1
if ! test -f ${BLFS_XML}; then
echo File \`${BLFS_XML}\' does not exist
exit 1
fi
SPECIAL_FILE=$2
if test -z "${SPECIAL_FILE}"; then SPECIAL_FILE=specialCases.xsl;fi
BLFS_DIR=$3
if test -z "${BLFS_DIR}"; then BLFS_DIR=$(cd $(dirname ${BLFS_XML})/.. ; pwd);fi
# Packages whose version does not begin with a number
EXCEPTIONS=$(grep 'ENTITY.*version[ ]*"[^0-9"&.].*[0-9]' ${BLFS_DIR}/packages.ent |
sed 's@^[^"]*"\([^"]*\)".*@\1@')
# Non-versioned packages:
NV_LIST="postlfs-config-profile postlfs-config-random postlfs-config-vimrc \
initramfs xorg-env kde-pre-install-config kf5-intro \
lxqt-pre-install lxqt-post-install ojdk-conf tex-path"
cat >$SPECIAL_FILE << EOF
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
version="1.0">
<xsl:template match='*' mode="special">
<xsl:choose>
<!-- Although versioned, this page is not a package. But
the sect2 with id "xorg-env" is referred to at several
places in the book. We have added it to the list of non
versioned packages. -->
<xsl:when test="@id='xorg7'">
<xsl:apply-templates select="child::sect2" mode="special"/>
</xsl:when>
EOF
# Non-versionned packages. Add to NV_LIST if you need more.
for nv_id in $NV_LIST; do
cat >>$SPECIAL_FILE << EOF
<xsl:when test="@id='$nv_id'">
<xsl:text> </xsl:text>
<package><xsl:text>&#xA; </xsl:text>
<xsl:element name="name">$nv_id</xsl:element>
<xsl:text>&#xA; </xsl:text>
<xsl:element name="version">1.0.0</xsl:element>
<xsl:if
test="document(\$installed-packages)//package[name=current()/@id]">
<xsl:text>&#xA; </xsl:text>
<xsl:element name="inst-version">
<xsl:value-of
select="document(\$installed-packages
)//package[name=current()/@id]/version"/>
</xsl:element>
</xsl:if>
<!-- Dependencies -->
<xsl:apply-templates select=".//para[@role='required' or
@role='recommended' or
@role='optional']"
mode="dependency"/>
<!-- End dependencies -->
<xsl:text>&#xA; </xsl:text>
</package><xsl:text>&#xA;</xsl:text>
</xsl:when>
EOF
done
# Taking packages inside x7proto etc, as versionned modules.
# We also write a dependency expansion when a dep is of the form
# xorg7-something. Since that is another template, we need
# a temporary file, which we shall concatenate at the end
cat >tmpfile << EOF
<xsl:template name="expand-deps">
<xsl:param name="section"/>
<xsl:param name="status"/>
<xsl:param name="build"/>
<xsl:choose>
EOF
for file in $(ls ${BLFS_DIR}/x/installing/x7* | grep -v x7driver); do
id=$(grep xreflabel $file | sed 's@.*id="\([^"]*\).*@\1@')
cat >>$SPECIAL_FILE << EOF
<xsl:when test="@id='$id'">
<xsl:text> </xsl:text>
<package><xsl:text>&#xA; </xsl:text>
<xsl:element name="name">$id</xsl:element>
<xsl:text>&#xA; </xsl:text>
EOF
cat >> tmpfile << EOF
<xsl:when test="\$section='$id'">
EOF
# We extract the list of packages for an xorg page from
# the version part of the .xml file. Seems that
# the order is not always the same as in the "cat" command.
# So we have to read that command too, since it may be assumed
# that the preceding package is a dependency of the following,
# except the first.
list_cat="$(sed -n '/>cat/,/EOF</p' $file | grep -v 'cat\|EOF' |
awk '{ print $NF }' | sed 's/-&.*//')"
# Rationale for the sed below: the following for breaks words at spaces (unless
# we tweak IFS). So replace spaces with commas in lines so that only newlines
# are separators.
for pack in \
$(grep 'ENTITY.*version' $file | sed 's/[ ]\+/,/g'); do
packname=$(echo $pack | sed s'@.*ENTITY,\(.*\)-version.*@\1@')
packversion=$(echo $pack | sed 's@[^"]*"\([^"]*\).*@\1@')
precpack=NONE
for i in $list_cat; do
if [ "$i" = "$packname" ]; then break; fi
precpack=$i
done
# It may happen that packname is not in list_cat, because its entity
# is commented out in the xml, but we do not check that (too complicated).
# In that case, the whole list is scanned, and $precpack=$i at the end.
# when packname is found in the list $precpack!=$i.
if [ "$precpack" = "$i" ]; then continue; fi
cat >>$SPECIAL_FILE << EOF
<module><xsl:text>&#xA; </xsl:text>
<xsl:element name="name">$packname</xsl:element>
<xsl:element name="version">$packversion</xsl:element>
<xsl:if test="document(\$installed-packages)//package[name='$packname']">
<xsl:element name="inst-version">
<xsl:value-of
select="document(\$installed-packages
)//package[name='$packname']/version"/>
</xsl:element>
</xsl:if>
<!-- Dependencies -->
EOF
if test $precpack != NONE; then
cat >>$SPECIAL_FILE << EOF
<xsl:element name="dependency">
<xsl:attribute name="status">required</xsl:attribute>
<xsl:attribute name="build">before</xsl:attribute>
<xsl:attribute name="name">$precpack</xsl:attribute>
<xsl:attribute name="type">ref</xsl:attribute>
</xsl:element>
EOF
else
cat >>$SPECIAL_FILE << EOF
<xsl:apply-templates select=".//para[@role='required' or
@role='recommended' or
@role='optional']"
mode="dependency"/>
EOF
fi
cat >>$SPECIAL_FILE << EOF
<!-- End dependencies -->
</module>
EOF
cat >> tmpfile << EOF
<xsl:element name="dependency">
<xsl:attribute name="status">
<xsl:value-of select="\$status"/>
</xsl:attribute>
<xsl:attribute name="build">
<xsl:value-of select="\$build"/>
</xsl:attribute>
<xsl:attribute name="name">$packname</xsl:attribute>
<xsl:attribute name="type">ref</xsl:attribute>
</xsl:element>
EOF
done
cat >>$SPECIAL_FILE << EOF
</package>
</xsl:when>
EOF
cat >> tmpfile << EOF
</xsl:when>
EOF
done
for ver_ent in $EXCEPTIONS; do
id=$(grep 'xreflabel=".*'$ver_ent $BLFS_XML | sed 's@.*id="\([^"]*\)".*@\1@')
[[ -z $id ]] && continue
cat >>$SPECIAL_FILE << EOF
<xsl:when test="@id='$id'">
<!-- if there is a sect1 ancestor, we have a module -->
<xsl:choose>
<xsl:when test="ancestor::sect1">
<xsl:text> </xsl:text>
<module><xsl:text>&#xA; </xsl:text>
<xsl:element name="name">$id</xsl:element>
<xsl:text>&#xA; </xsl:text>
<xsl:element name="version">$ver_ent</xsl:element>
<xsl:if
test="document(\$installed-packages)//package[name=current()/@id]">
<xsl:text>&#xA; </xsl:text>
<xsl:element name="inst-version">
<xsl:value-of
select="document(\$installed-packages
)//package[name=current()/@id]/version"/>
</xsl:element>
</xsl:if>
<!-- Dependencies -->
<xsl:apply-templates select=".//para[@role='required' or
@role='recommended' or
@role='optional']"
mode="dependency"/>
<!-- End dependencies -->
<xsl:text>&#xA; </xsl:text>
</module><xsl:text>&#xA;</xsl:text>
</xsl:when>
<xsl:otherwise>
<xsl:text> </xsl:text>
<package><xsl:text>&#xA; </xsl:text>
<xsl:element name="name">$id</xsl:element>
<xsl:text>&#xA; </xsl:text>
<xsl:element name="version">$ver_ent</xsl:element>
<xsl:if
test="document(\$installed-packages)//package[name=current()/@id]">
<xsl:text>&#xA; </xsl:text>
<xsl:element name="inst-version">
<xsl:value-of
select="document(\$installed-packages
)//package[name=current()/@id]/version"/>
</xsl:element>
</xsl:if>
<!-- Dependencies -->
<xsl:apply-templates select=".//para[@role='required' or
@role='recommended' or
@role='optional']"
mode="dependency"/>
<!-- End dependencies -->
<xsl:text>&#xA; </xsl:text>
</package><xsl:text>&#xA;</xsl:text>
</xsl:otherwise>
</xsl:choose>
</xsl:when>
EOF
done
cat >>$SPECIAL_FILE << EOF
<xsl:otherwise>
<xsl:apply-templates
select="self::node()[contains(translate(@xreflabel,
'123456789',
'000000000'),
'-0')
]"
mode="normal"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
EOF
cat $SPECIAL_FILE tmpfile > tmpfile1
mv tmpfile1 $SPECIAL_FILE
rm tmpfile
cat >> $SPECIAL_FILE << EOF
<xsl:otherwise>
<xsl:message>
<xsl:text>You should not be seeing this</xsl:text>
</xsl:message>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
</xsl:stylesheet>
EOF