This repository has been archived on 2024-10-17. You can view files and clone it, but cannot push or open issues or pull requests.
MahiroOS-jhalfs/CLFS/master.sh

1267 lines
44 KiB
Bash
Raw Normal View History

2006-11-11 12:39:16 +01:00
#!/bin/bash
# $Id$
orphan_scripts="" # 2 scripts do not fit BOOT_Makefiles LUSER environment
#--------------------------------------#
host_prep_Makefiles() { #
#--------------------------------------#
2006-07-02 11:24:47 +02:00
local CLFS_HOST
echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
# defined here, only for ease of reading
2006-07-17 19:42:13 +02:00
CLFS_HOST="$(echo $MACHTYPE | sed "s/$(echo $MACHTYPE | cut -d- -f2)/cross/")"
(
cat << EOF
023-creatingtoolsdir:
@\$(call echo_message, Building)
@install -dv \$(MOUNT_PT)/tools && \\
rm -f /tools && \\
ln -s \$(MOUNT_PT)/tools /
@\$(call housekeeping)
024-creatingcrossdir: 023-creatingtoolsdir
@\$(call echo_message, Building)
@install -dv \$(MOUNT_PT)/cross-tools && \\
rm -f /cross-tools && \\
ln -s \$(MOUNT_PT)/cross-tools /
@\$(call housekeeping)
025-addinguser: 024-creatingcrossdir
@\$(call echo_message, Building)
@if [ ! -d \$(LUSER_HOME) ]; then \\
groupadd \$(LGROUP); \\
useradd -s /bin/bash -g \$(LGROUP) -d \$(LUSER_HOME) \$(LUSER); \\
mkdir -pv \$(LUSER_HOME); \\
chown -v \$(LUSER):\$(LGROUP) \$(LUSER_HOME); \\
else \\
touch luser-exist; \\
fi
@chown -v \$(LUSER) \$(MOUNT_PT)/tools && \\
chown -v \$(LUSER) \$(MOUNT_PT)/cross-tools && \\
chmod -R a+wt \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
chmod a+wt \$(SRCSDIR)
@\$(call housekeeping)
026-settingenvironment: 025-addinguser
@\$(call echo_message, Building)
@if [ -f \$(LUSER_HOME)/.bashrc -a ! -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
mv \$(LUSER_HOME)/.bashrc \$(LUSER_HOME)/.bashrc.XXX; \\
fi
@if [ -f \$(LUSER_HOME)/.bash_profile -a ! -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
mv \$(LUSER_HOME)/.bash_profile \$(LUSER_HOME)/.bash_profile.XXX; \\
fi;
@echo "set +h" > \$(LUSER_HOME)/.bashrc && \\
echo "umask 022" >> \$(LUSER_HOME)/.bashrc && \\
echo "CLFS=\$(MOUNT_PT)" >> \$(LUSER_HOME)/.bashrc && \\
echo "LC_ALL=POSIX" >> \$(LUSER_HOME)/.bashrc && \\
echo "PATH=/cross-tools/bin:/bin:/usr/bin" >> \$(LUSER_HOME)/.bashrc && \\
echo "export CLFS LC_ALL PATH" >> \$(LUSER_HOME)/.bashrc && \\
echo "" >> \$(LUSER_HOME)/.bashrc && \\
echo "unset CFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
echo "unset CXXFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
echo "unset PKG_CONFIG_PATH" >> \$(LUSER_HOME)/.bashrc && \\
echo "" >> \$(LUSER_HOME)/.bashrc && \\
EOF
) >> $MKFILE.tmp
if ! [ -e final-preps/*variables ]; then
(
cat << EOF
echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> \$(LUSER_HOME)/.bashrc && \\
echo "export CLFS_TARGET=\"${TARGET}\"" >> \$(LUSER_HOME)/.bashrc && \\
echo "export CLFS_TARGET32=\"${TARGET32}\"" >> \$(LUSER_HOME)/.bashrc && \\
EOF
) >> $MKFILE.tmp
fi
(
cat << EOF
echo "source $JHALFSDIR/envars" >> \$(LUSER_HOME)/.bashrc
@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bashrc && \\
chmod a+wt \$(MOUNT_PT) && \\
if [ -d \$(MOUNT_PT)/var ]; then \\
chown -R \$(LUSER) \$(MOUNT_PT)/var; \\
fi && \\
touch envars && \\
chown \$(LUSER):\$(LGROUP) envars
@\$(call housekeeping)
EOF
) >> $MKFILE.tmp
host_prep=" 023-creatingtoolsdir 024-creatingcrossdir 026-settingenvironment"
}
#--------------------------------------#
final_preps_Makefiles() {
#--------------------------------------#
echo "${tab_}${GREEN}Processing... ${L_arrow}variables ( LUSER ) ${R_arrow}"
for file in final-preps/* ; do
this_script=`basename $file`
case $this_script in
*variables )
;;
*) continue; ;;
esac
# Set the dependency for the first target.
if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
# First append each name of the script files to a list (this will become
# the names of the targets in the Makefile
final_preps="$final_preps $this_script"
# No need to grab the package name
LUSER_wrt_target "${this_script}" "$PREV"
LUSER_wrt_RunAsUser "${file}"
wrt_touch
PREV=$this_script
done # for file in ....
}
#--------------------------------------#
cross_tools_Makefiles() { #
#--------------------------------------#
echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
for file in cross-tools/* ; do
# Keep the script file name
this_script=`basename $file`
#
# Skip this script...
case $this_script in
*cflags* | *variables* ) # work done in host_prep_Makefiles
continue; ;;
*) ;;
esac
#
# Set the dependency for the first target.
if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
# First append each name of the script files to a list (this will become
# the names of the targets in the Makefile
cross_tools="$cross_tools $this_script"
# Grab the name of the target (minus the -headers or -cross in the case of gcc
# and binutils in chapter 5)
name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' \
-e 's@-static@@' \
-e 's@-final@@' \
-e 's@-64@@' \
-e 's@-n32@@' \
-e 's@-pass1@@'`
pkg_tarball=$(get_package_tarball_name $name)
#--------------------------------------------------------------------#
# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
#--------------------------------------------------------------------#
#
# Drop in the name of the target on a new line, and the previous target
# as a dependency. Also call the echo_message function.
LUSER_wrt_target "${this_script}" "$PREV"
#
# If $pkg_tarball isn't empty, we've got a package...
#
[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = 3 ]] && wrt_makeflags "${name}"
#
LUSER_wrt_RunAsUser "${file}"
#
[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
#
# Include a touch of the target name so make can check if it's already been made.
wrt_touch
#
#--------------------------------------------------------------------#
# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
#--------------------------------------------------------------------#
#
# Keep the script file name for Makefile dependencies.
PREV=$this_script
done # for file in ....
}
#--------------------------------------#
temptools_Makefiles() { #
#--------------------------------------#
echo "${tab_}${GREEN}Processing... ${L_arrow}temp system ( LUSER ) ${R_arrow}"
for file in temp-system/* ; do
# Keep the script file name
this_script=`basename $file`
#
# Deal with any odd scripts..
case $this_script in
*choose) # The choose script will fail if you cannot enter the new environment
# If the 'boot' build method was chosen don't run the script
[[ $METHOD = "boot" ]] && continue; ;;
*) ;;
esac
2006-07-02 11:24:47 +02:00
#
# First append each name of the script files to a list (this will become
# the names of the targets in the Makefile
temptools="$temptools $this_script"
#
# Grab the name of the target, strip id number, XXX-script
name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'`
#
pkg_tarball=$(get_package_tarball_name $name)
#--------------------------------------------------------------------#
# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
#--------------------------------------------------------------------#
#
# Drop in the name of the target on a new line, and the previous target
# as a dependency. Also call the echo_message function.
LUSER_wrt_target "${this_script}" "$PREV"
#
# If $pkg_tarball isn't empty, we've got a package...
# Insert instructions for unpacking the package and to set the PKGDIR variable.
#
[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
#
LUSER_wrt_RunAsUser "${file}"
#
[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
#
# Include a touch of the target name so make can check if it's already been made.
wrt_touch
#
#--------------------------------------------------------------------#
# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
#--------------------------------------------------------------------#
#
# Keep the script file name for Makefile dependencies.
PREV=$this_script
done # for file in ....
}
#--------------------------------------#
chroot_Makefiles() { #
#--------------------------------------#
echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools CHROOT ( CHROOT ) ${R_arrow}"
for file in chroot/* ; do
# Keep the script file name
this_script=`basename $file`
#
# Skipping scripts is done now and not included in the build tree.
case $this_script in
*chroot*) continue ;;
esac
#
# First append each name of the script files to a list (this will become
# the names of the targets in the Makefile
case "${this_script}" in
*kernfs) orphan_scripts="${orphan_scripts} ${this_script}" ;;
*) chroottools="$chroottools $this_script" ;;
esac
# Grab the name of the target, strip id number, XXX-script
name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'`
pkg_tarball=$(get_package_tarball_name $name)
# This is very ugly:: util-linux is in /chroot but must be run under LUSER
2012-02-09 23:58:45 +01:00
# Same for e2fsprogs (in CLFS 1.1.0)
# .. Customized makefile entry
case "${this_script}" in
*util-linux)
LUSER_wrt_target "${this_script}" "$PREV"
LUSER_wrt_unpack "$pkg_tarball"
[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
LUSER_wrt_RunAsUser "${file}"
LUSER_RemoveBuildDirs "${name}"
wrt_touch
temptools="$temptools $this_script"
continue ;;
2012-02-09 23:58:45 +01:00
*util-linux-ng)
LUSER_wrt_target "${this_script}" "$PREV"
LUSER_wrt_unpack "$pkg_tarball"
[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
2012-02-09 23:58:45 +01:00
LUSER_wrt_RunAsUser "${file}"
LUSER_RemoveBuildDirs "${name}"
wrt_touch
temptools="$temptools $this_script"
continue ;;
*util-linux-libs)
LUSER_wrt_target "${this_script}" "$PREV"
LUSER_wrt_unpack "$pkg_tarball"
[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
2012-02-09 23:58:45 +01:00
LUSER_wrt_RunAsUser "${file}"
LUSER_RemoveBuildDirs "${name}"
wrt_touch
temptools="$temptools $this_script"
continue ;;
*e2fsprogs)
LUSER_wrt_target "${this_script}" "$PREV"
LUSER_wrt_unpack "$pkg_tarball"
[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
2012-02-09 23:58:45 +01:00
LUSER_wrt_RunAsUser "${file}"
LUSER_RemoveBuildDirs "${name}"
wrt_touch
temptools="$temptools $this_script"
continue ;;
*e2fsprogs-libs)
LUSER_wrt_target "${this_script}" "$PREV"
LUSER_wrt_unpack "$pkg_tarball"
[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
2012-02-09 23:58:45 +01:00
LUSER_wrt_RunAsUser "${file}"
LUSER_RemoveBuildDirs "${name}"
wrt_touch
temptools="$temptools $this_script"
continue ;;
esac
#--------------------------------------------------------------------#
# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
#--------------------------------------------------------------------#
#
# Drop in the name of the target on a new line, and the previous target
# as a dependency. Also call the echo_message function.
CHROOT_wrt_target "${this_script}" "$PREV"
#
# If $pkg_tarball isn't empty, we've got a package...
# Insert instructions for unpacking the package and changing directories
#
if [ "$pkg_tarball" != "" ] ; then
2006-11-11 22:20:15 +01:00
CHROOT_Unpack "$pkg_tarball"
[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
fi
#
# Select a script execution method
case $this_script in
2006-11-11 22:20:15 +01:00
*kernfs) wrt_RunAsRoot "${file}" ;;
*) CHROOT_wrt_RunAsRoot "${file}" ;;
esac
#
# Housekeeping...remove the build directory(ies), except if the package build fails.
[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
#
# Include a touch of the target name so make can check if it's already been made.
wrt_touch
#
#--------------------------------------------------------------------#
# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
#--------------------------------------------------------------------#
#
# Keep the script file name for Makefile dependencies.
PREV=$this_script
done # for file in...
}
#--------------------------------------#
boot_Makefiles() { #
#--------------------------------------#
echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools BOOT ( LUSER ) ${R_arrow}"
#
# Create a target bootable partition containing a compile environment. Later
# on we boot into this environment and contine the build.
#
for file in boot/* ; do
# Keep the script file name
this_script=`basename $file`
# A little housekeeping on the scripts
case $this_script in
*grub | *aboot | *colo | *silo | *arcload | *lilo | *introduction ) continue ;;
*how-to-view*) continue ;;
*whatnext*) continue ;;
*fstab) [[ -z "${FSTAB}" ]] ||
[[ ${FSTAB} == $BUILDDIR/sources/fstab ]] ||
cp ${FSTAB} $BUILDDIR/sources/fstab ;;
*kernel) # if there is no kernel config file do not build the kernel
[[ -z $BOOT_CONFIG ]] && continue
# Copy the config file to /sources with a standardized name
[[ ${BOOT_CONFIG} == $BUILDDIR/sources/bootkernel-config ]] ||
cp $BOOT_CONFIG $BUILDDIR/sources/bootkernel-config
;;
esac
#
# First append each name of the script files to a list (this will become
# the names of the targets in the Makefile). Those names differ depending
# on the version of the book. What makes the difference between those
# versions is the presence of "how-to-view" in the boot chapter.
if [ -f boot/*how-to-view ]; then
case "${this_script}" in
*changingowner)
orphan_scripts="${orphan_scripts} ${this_script}"
;;
*creatingdirs)
orphan_scripts="${orphan_scripts} ${this_script}"
;;
*createfiles)
orphan_scripts="${orphan_scripts} ${this_script}"
;;
*devices)
orphan_scripts="${orphan_scripts} ${this_script}"
;;
*flags)
orphan_scripts="${orphan_scripts} ${this_script}"
;;
*fstab)
orphan_scripts="${orphan_scripts} ${this_script}"
;;
*pwdgroup)
orphan_scripts="${orphan_scripts} ${this_script}"
;;
*settingenvironment)
orphan_scripts="${orphan_scripts} ${this_script}"
;;
*)
boottools="$boottools $this_script"
;;
esac
else
case "${this_script}" in
*changingowner)
orphan_scripts="${orphan_scripts} ${this_script}"
;;
*devices)
orphan_scripts="${orphan_scripts} ${this_script}"
;;
*)
boottools="$boottools $this_script"
;;
esac
fi
#
# Grab the name of the target, strip id number and misc words.
case $this_script in
*kernel) name=linux ;;
*bootscripts) name="bootscripts-cross-lfs" ;;
*boot-scripts) name="boot-scripts-cross-lfs" ;;
*udev-rules) name="udev-cross-lfs" ;;
*grub-build) name=grub ;;
*-aboot-build) name=aboot ;;
*yaboot-build) name=yaboot ;;
*colo-build) name=colo ;;
*silo-build) name=silo ;;
*arcload-build) name=arcload ;;
*lilo-build) name=lilo ;;
*) name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
esac
# Identify the unique version naming scheme for the clfs bootscripts..(bad boys)
pkg_tarball=$(get_package_tarball_name $name)
#--------------------------------------------------------------------#
# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
#--------------------------------------------------------------------#
#
# Drop in the name of the target on a new line, and the previous target
# as a dependency. Also call the echo_message function.
LUSER_wrt_target "${this_script}" "$PREV"
#
# If $pkg_tarball isn't empty, we've got a package...
# Insert instructions for unpacking the package and changing directories
#
[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
#
# Select a script execution method
if [ -f boot/*how-to-view ]; then
case $this_script in
# The following 8 scripts are defined in the /boot directory but need
# to be run as a root user. Set them up here but run them in another
# phase
*changingowner) wrt_RunAsRoot "${file}" ;;
*creatingdirs) wrt_RunAsRoot "${file}" ;;
*createfiles) wrt_RunAsRoot "${file}" ;;
*devices) wrt_RunAsRoot "${file}" ;;
*flags) wrt_RunAsRoot "${file}" ;;
*fstab)
if [[ -n "$FSTAB" ]]; then
LUSER_wrt_CopyFstab
else
wrt_RunAsRoot "${file}"
fi
;;
*pwdgroup) wrt_RunAsRoot "${file}" ;;
*settingenvironment) wrt_RunAsRoot "${file}" ;;
*) LUSER_wrt_RunAsUser "${file}" ;;
esac
else
case $this_script in
# The following 2 scripts are defined in the /boot directory but need
# to be run as a root user. Set them up here but run them in another
# phase
*changingowner) wrt_RunAsRoot "${file}" ;;
*devices) wrt_RunAsRoot "${file}" ;;
*fstab)
if [[ -n "${FSTAB}" ]]; then
LUSER_wrt_CopyFstab
else
LUSER_wrt_RunAsUser "${file}"
fi
;;
*) LUSER_wrt_RunAsUser "${file}" ;;
esac
fi
#
# Housekeeping...remove any build directory(ies) except if the package build fails.
[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
#
# Include a touch of the target name so make can check if it's already been made.
wrt_touch
#
#--------------------------------------------------------------------#
# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
#--------------------------------------------------------------------#
#
# Keep the script file name for Makefile dependencies.
PREV=$this_script
done
}
#--------------------------------------#
testsuite_tools_Makefiles() { #
#--------------------------------------#
if [[ "${METHOD}" = "chroot" ]]; then
echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) testsuite tools ( CHROOT ) ${R_arrow}"
else
echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) testsuite tools ( ROOT ) ${R_arrow}"
2006-11-13 22:17:10 +01:00
PREV=""
fi
for file in testsuite-tools/* ; do
# Keep the script file name
this_script=`basename $file`
# First append each name of the script files to a list (this will become
# the names of the targets in the Makefile
testsuitetools="$testsuitetools $this_script"
# Grab the name of the target, strip id number, XXX-script
name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'\
-e 's@-64bit@@' \
-e 's@-64@@' \
-e 's@64@@' \
-e 's@n32@@'`
pkg_tarball=$(get_package_tarball_name $name)
#--------------------------------------------------------------------#
# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
#--------------------------------------------------------------------#
#
# Drop in the name of the target on a new line, and the previous target
# as a dependency. Also call the echo_message function.
CHROOT_wrt_target "${this_script}" "$PREV"
#
CHROOT_Unpack "$pkg_tarball"
[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
#
CHROOT_wrt_RunAsRoot "${file}"
#
CHROOT_wrt_RemoveBuildDirs "${name}"
#
# Include a touch of the target name so make can check if it's already been made.
wrt_touch
#
#--------------------------------------------------------------------#
# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
#--------------------------------------------------------------------#
#
# Keep the script file name for Makefile dependencies.
PREV=$this_script
done
}
#--------------------------------------#
final_system_Makefiles() { #
#--------------------------------------#
# Set envars and scripts for iteration targets
if [[ -z "$1" ]] ; then
local N=""
# In boot method the makesys phase was initiated in testsuite_tools_makefile
[[ "${METHOD}" = "boot" ]] && [[ "$TEST" = 0 ]] && PREV=""
else
local N=-build_$1
local basicsystem=""
mkdir final-system$N
cp final-system/* final-system$N
for script in final-system$N/* ; do
# Overwrite existing symlinks, files, and dirs
sed -e 's/ln -sv/&f/g' \
-e 's/mv -v/&f/g' \
-e 's/mkdir -v/&p/g' -i ${script}
# Rename the scripts
mv ${script} ${script}$N
done
# Remove Bzip2 binaries before make install (CLFS-1.0 compatibility)
sed -e 's@make install@rm -vf /usr/bin/bz*\n&@' -i final-system$N/*-bzip2$N
# Delete *old Readline libraries just after make install
sed -e 's@make install@&\nrm -v /lib/lib{history,readline}*old@' -i final-system$N/*-readline$N
fi
if [[ "${METHOD}" = "chroot" ]]; then
echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) final system$N ( CHROOT ) ${R_arrow}"
else
echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) final system$N ( ROOT ) ${R_arrow}"
fi
for file in final-system$N/* ; do
# Keep the script file name
this_script=`basename $file`
# Test if the stripping phase must be skipped.
# Skip also temp-perl for iterative runs
case $this_script in
*stripping*) [[ "$STRIP" = "n" ]] && continue ;;
*temp-perl*) [[ -n "$N" ]] && continue ;;
esac
# Grab the name of the target, strip id number, XXX-script.
# name1 is partially stripped and should be used for logging files.
# name is completely stripped and is used for grabbing
# the package name.
name1=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' \
-e 's,'$N',,'`
name=`echo $name1 | sed -e 's@temp-@@' \
-e 's@-64bit@@' \
-e 's@-64@@' \
-e 's@64@@' \
-e 's@n32@@'`
# Find the version of the command files, if it corresponds with the building of
# a specific package. We need this here to can skip scripts not needed for
# iterations rebuilds
pkg_tarball=$(get_package_tarball_name $name)
if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
case "${this_script}" in
*stripping*) ;;
*) continue ;;
esac
fi
# Append each name of the script files to a list (this will become
# the names of the targets in the Makefile
basicsystem="$basicsystem ${this_script}"
#--------------------------------------------------------------------#
# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
#--------------------------------------------------------------------#
#
# Drop in the name of the target on a new line, and the previous target
# as a dependency. Also call the echo_message function.
CHROOT_wrt_target "${this_script}" "$PREV"
# If $pkg_tarball isn't empty, we've got a package...
if [ "$pkg_tarball" != "" ] ; then
# Touch timestamp file if installed files logs will be created.
# But only for the firt build when running iterative builds.
if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
CHROOT_wrt_TouchTimestamp
fi
CHROOT_Unpack "$pkg_tarball"
# If the testsuites must be run, initialize the log file
case $name in
binutils | gcc | glibc | eglibc | gmp | mpfr | mpc | isl | cloog )
[[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${this_script}"
;;
* )
[[ "$TEST" = "2" ]] || [[ "$TEST" = "3" ]] && CHROOT_wrt_test_log "${this_script}"
;;
esac
# If using optimizations, write the instructions
[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
fi
#
CHROOT_wrt_RunAsRoot "${file}"
#
# Write installed files log and remove the build directory(ies)
# except if the package build fails.
if [ "$pkg_tarball" != "" ] ; then
CHROOT_wrt_RemoveBuildDirs "$name"
if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
CHROOT_wrt_LogNewFiles "$name1"
fi
fi
#
# Include a touch of the target name so make can check
# if it's already been made.
wrt_touch
#
#--------------------------------------------------------------------#
# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
#--------------------------------------------------------------------#
#
# Keep the script file name for Makefile dependencies.
PREV=${this_script}
# Set system_build envar for iteration targets
system_build=$basicsystem
done # for file in final-system/* ...
}
#--------------------------------------#
bootscripts_Makefiles() { #
#--------------------------------------#
# New versions of the book do not have bootscripts anymore
# (use systemd configuration files)
# Define a variable to be used for the right script directory to parse
if [ -d bootscripts ]; then
config="bootscripts"
else
config="system-config"
fi
if [[ "${METHOD}" = "chroot" ]]; then
echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) $config ( CHROOT ) ${R_arrow}"
else
echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) $config ( ROOT ) ${R_arrow}"
fi
for file in $config/* ; do
# Keep the script file name
this_script=`basename $file`
case $this_script in
*udev) continue ;; # This is not a script but a comment, we want udev-rules
*console*) continue ;; # Use the files that came with the bootscripts
# fstab is now here (for 3.x.y)
*fstab) [[ -z "${FSTAB}" ]] ||
[[ ${FSTAB} == $BUILDDIR/sources/fstab ]] ||
cp ${FSTAB} $BUILDDIR/sources/fstab ;;
*) ;;
esac
# First append each name of the script files to a list (this will become
# the names of the targets in the Makefile
bootscripttools="$bootscripttools $this_script"
# Grab the name of the target, strip id number, XXX-script.
# name1 is partially stripped and should be used for logging files.
# name is completely stripped and is used for grabbing
# the package name.
name1=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'`
name=`echo $name1 | sed -e 's@-64bit@@' \
-e 's@-64@@' \
-e 's@64@@' \
-e 's@n32@@'`
case $name in
*bootscripts*) name=bootscripts-cross-lfs ;;
*udev-rules) name=udev-cross-lfs ;;
esac
pkg_tarball=$(get_package_tarball_name $name)
#--------------------------------------------------------------------#
# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
#--------------------------------------------------------------------#
#
# Drop in the name of the target on a new line, and the previous target
# as a dependency. Also call the echo_message function.
CHROOT_wrt_target "${this_script}" "$PREV"
#
# If $pkg_tarball isn't empty, we've got a package...
#
if [ "$pkg_tarball" != "" ] ; then
if [ "${INSTALL_LOG}" = "y" ] ; then
CHROOT_wrt_TouchTimestamp
fi
CHROOT_Unpack "$pkg_tarball"
fi
#
case $this_script in
*fstab*) if [[ -n "$FSTAB" ]]; then
CHROOT_wrt_CopyFstab
else
CHROOT_wrt_RunAsRoot "${file}"
fi
;;
*) CHROOT_wrt_RunAsRoot "${file}"
;;
esac
#
# Write installed files log and remove the build directory(ies)
# except if the package build fails.
if [ "$pkg_tarball" != "" ] ; then
CHROOT_wrt_RemoveBuildDirs "$name"
if [ "${INSTALL_LOG}" = "y" ] ; then
CHROOT_wrt_LogNewFiles "$name1"
fi
fi
#
# Include a touch of the target name so make can check if it's already been made.
wrt_touch
#
#--------------------------------------------------------------------#
# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
#--------------------------------------------------------------------#
#
# Keep the script file name for Makefile dependencies.
PREV=$this_script
done # for file in bootscripts/* ...
}
2012-02-09 23:58:45 +01:00
#--------------------------------------#
network_Makefiles() { #
#--------------------------------------#
if [[ "${METHOD}" = "chroot" ]]; then
echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) network ( CHROOT ) ${R_arrow}"
else
echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) network ( ROOT ) ${R_arrow}"
fi
for file in network/* ; do
# Keep the script file name
this_script=`basename $file`
case $this_script in
*choose) continue ;; # This is not a script but a commentary.
*dhcp) continue ;; # Assume static networking.
*dhcpcd) continue ;; # Assume static networking.
*) ;;
esac
# First append each name of the script files to a list (this will become
# the names of the targets in the Makefile
networktools="$networktools $this_script"
# Grab the name of the target, strip id number, XXX-script
# name1 is partially stripped and should be used for logging files.
# name is completely stripped and is used for grabbing
# the package name.
name1=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'`
name=`echo $name1 | sed -e 's@-64bit@@' \
-e 's@-64@@' \
-e 's@64@@' \
-e 's@n32@@'`
2012-02-09 23:58:45 +01:00
case $name in
network-scripts) name=clfs-network-scripts ;;
2012-02-09 23:58:45 +01:00
esac
pkg_tarball=$(get_package_tarball_name $name)
#--------------------------------------------------------------------#
# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
#--------------------------------------------------------------------#
#
# Drop in the name of the target on a new line, and the previous target
# as a dependency. Also call the echo_message function.
CHROOT_wrt_target "${this_script}" "$PREV"
#
# If $pkg_tarball isn't empty, we've got a package...
#
if [ "$pkg_tarball" != "" ] ; then
if [ "${INSTALL_LOG}" = "y" ] ; then
CHROOT_wrt_TouchTimestamp
2012-02-09 23:58:45 +01:00
fi
CHROOT_Unpack "$pkg_tarball"
fi
#
CHROOT_wrt_RunAsRoot "${file}"
#
# Write installed files log and remove the build directory(ies)
# except if the package build fails.
if [ "$pkg_tarball" != "" ] ; then
CHROOT_wrt_RemoveBuildDirs "$name"
if [ "${INSTALL_LOG}" = "y" ] ; then
CHROOT_wrt_LogNewFiles "$name1"
2012-02-09 23:58:45 +01:00
fi
fi
#
# Include a touch of the target name so make can check if it's already been made.
wrt_touch
#
#--------------------------------------------------------------------#
# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
#--------------------------------------------------------------------#
#
# Keep the script file name for Makefile dependencies.
PREV=$this_script
done # for file in network/* ...
}
#--------------------------------------#
bootable_Makefiles() { #
#--------------------------------------#
if [[ "${METHOD}" = "chroot" ]]; then
echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) make bootable ( CHROOT ) ${R_arrow}"
else
echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) make bootable ( ROOT ) ${R_arrow}"
fi
for file in bootable/* ; do
# Keep the script file name
this_script=`basename $file`
# A little housekeeping on the scripts
case $this_script in
*grub | *aboot | *colo | *silo | *arcload | *lilo | *reboot* ) continue ;;
*fstab) [[ -z "${FSTAB}" ]] ||
[[ ${FSTAB} == $BUILDDIR/sources/fstab ]] ||
cp ${FSTAB} $BUILDDIR/sources/fstab ;;
*kernel) # if there is no kernel config file do not build the kernel
[[ -z $CONFIG ]] && continue
# Copy the config file to /sources with a standardized name
[[ $CONFIG == $BUILDDIR/sources/kernel-config ]] ||
cp $CONFIG $BUILDDIR/sources/kernel-config
;;
esac
#
# First append each name of the script files to a list (this will become
# the names of the targets in the Makefile
bootabletools="$bootabletools $this_script"
#
# Grab the name of the target, strip id number and misc words.
name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
case $this_script in
*kernel*) name=linux
;;
esac
pkg_tarball=$(get_package_tarball_name $name)
#--------------------------------------------------------------------#
# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
#--------------------------------------------------------------------#
#
# Drop in the name of the target on a new line, and the previous target
# as a dependency. Also call the echo_message function.
CHROOT_wrt_target "${this_script}" "$PREV"
#
# If $pkg_tarball isn't empty, we've got a package...
# Insert instructions for unpacking the package and changing directories
#
if [ "$pkg_tarball" != "" ] ; then
if [ "${INSTALL_LOG}" = "y" ] ; then
CHROOT_wrt_TouchTimestamp
fi
CHROOT_Unpack "$pkg_tarball"
fi
#
# Select a script execution method
case $this_script in
*fstab*) if [[ -n "$FSTAB" ]]; then
CHROOT_wrt_CopyFstab
else
CHROOT_wrt_RunAsRoot "${file}"
fi
;;
*) CHROOT_wrt_RunAsRoot "${file}"
;;
esac
#
# Write installed files log and remove the build directory(ies)
# except if the package build fails.
if [ "$pkg_tarball" != "" ] ; then
CHROOT_wrt_RemoveBuildDirs "$name"
if [ "${INSTALL_LOG}" = "y" ] ; then
CHROOT_wrt_LogNewFiles "$name"
fi
fi
#
# Include a touch of the target name so make can check if it's already been made.
wrt_touch
#
#--------------------------------------------------------------------#
# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
#--------------------------------------------------------------------#
#
# Keep the script file name for Makefile dependencies.
PREV=$this_script
done
}
#--------------------------------------#
build_Makefile() { # Construct a Makefile from the book scripts
#--------------------------------------#
echo "...Creating Makefile... ${BOLD}START${OFF}"
cd $JHALFSDIR/${PROGNAME}-commands
# Start with clean files
>$MKFILE
>$MKFILE.tmp
method_cmds=${METHOD}_Makefiles
host_prep_Makefiles # mk_SETUP (SETUP) $host_prep
final_preps_Makefiles # mk_F_PREPS (LUSER) $final_preps
cross_tools_Makefiles # mk_CROSS (LUSER) $cross_tools
temptools_Makefiles # mk_TEMP (LUSER) $temptools
$method_cmds # mk_SYSTOOLS (CHROOT) $chroottools/$boottools
if [[ ! $TEST = "0" ]]; then
testsuite_tools_Makefiles # mk_SYSTOOLS (CHROOT) $testsuitetools
fi
final_system_Makefiles # mk_FINAL (CHROOT) $basicsystem
# Add the iterations targets, if needed
[[ "$COMPARE" = "y" ]] && wrt_compare_targets
bootscripts_Makefiles # mk_BOOTSCRIPT (CHROOT) $bootscripttools
2012-02-09 23:58:45 +01:00
if [ -d network ]; then
network_Makefiles # If present, process network setup.
fi
bootable_Makefiles # mk_BOOTABLE (CHROOT) $bootabletools
# Add the CUSTOM_TOOLS targets, if needed
[[ "$CUSTOM_TOOLS" = "y" ]] && wrt_CustomTools_target
# Add a header, some variables and include the function file
# to the top of the real Makefile.
wrt_Makefile_header
# Add chroot commands
if [ "$METHOD" = "chroot" ] ; then
CHROOT_LOC="`whereis -b chroot | cut -d " " -f2`"
chroot=`cat chroot/???-chroot | \
sed -e "s@chroot@$CHROOT_LOC@" \
-e '/#!\/bin\/bash/d' \
-e '/^export/d' \
-e '/^logout/d' \
-e 's@ \\\@ @g' | \
tr -d '\n' | \
sed -e 's/ */ /g' \
-e 's|\\$|&&|g' \
-e 's|exit||g' \
-e 's|$| -c|' \
-e 's|"$${CLFS}"|$(MOUNT_PT)|'\
-e 's|set -e||' \
-e 's|set +h||'`
echo -e "CHROOT1= $chroot\n" >> $MKFILE
fi
################## CHROOT ####################
if [[ "${METHOD}" = "chroot" ]]; then
(
cat << EOF
all: ck_UID mk_SETUP mk_F_PREPS mk_SUDO mk_SYSTOOLS create-sbu_du-report mk_CUSTOM_TOOLS mk_BLFS_TOOL
@sudo make do-housekeeping
@echo "$VERSION - jhalfs build" > clfs-release && \\
sudo mv clfs-release \$(MOUNT_PT)/etc && \\
sudo chown root:root \$(MOUNT_PT)/etc/clfs-release
@\$(call echo_finished,$VERSION)
ck_UID:
@if [ \`id -u\` = "0" ]; then \\
echo "+--------------------------------------------------+"; \\
echo "|You cannot run this makefile from the root account|"; \\
echo "+--------------------------------------------------+"; \\
exit 1; \\
fi
#---------------AS ROOT
mk_SETUP:
@\$(call echo_SU_request)
2007-04-05 19:55:48 +02:00
@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
@touch \$@
#---------------AS LUSER
mk_F_PREPS: mk_SETUP
@\$(call echo_PHASE,Final Preparations Cross and Temporary Tools)
@( \$(SU_LUSER) "make -C \$(MOUNT_PT)/\$(SCRIPT_ROOT) BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
@sudo make restore-luser-env
@touch \$@
mk_SUDO: mk_F_PREPS
2007-04-05 19:55:48 +02:00
@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
@touch \$@
#---------------CHROOT JAIL
mk_SYSTOOLS: mk_SUDO
@\$(call echo_CHROOT_request)
@\$(call echo_PHASE, CHROOT JAIL )
@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) PREP_CHROOT_JAIL")
2007-04-05 19:55:48 +02:00
@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CHROOT_JAIL")
@touch \$@
mk_BLFS_TOOL: create-sbu_du-report
@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
(sudo \$(CHROOT1) "make -C $BLFS_ROOT/work"); \\
fi;
@touch \$@
mk_CUSTOM_TOOLS: mk_BLFS_TOOL
@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
sudo mkdir -p ${BUILDDIR}${TRACKING_DIR}; \\
2007-04-05 19:55:48 +02:00
(sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS"); \\
fi;
@touch \$@
SETUP: $host_prep
AS_LUSER: $final_preps $cross_tools $temptools
SUDO: $orphan_scripts
PREP_CHROOT_JAIL: SHELL=/tools/bin/bash
PREP_CHROOT_JAIL: ${chroottools}
CHROOT_JAIL: SHELL=/tools/bin/bash
CHROOT_JAIL: $testsuitetools $basicsystem $bootscripttools $bootabletools
CUSTOM_TOOLS: $custom_list
create-sbu_du-report: mk_SYSTOOLS
@\$(call echo_message, Building)
@if [ "\$(ADD_REPORT)" = "y" ]; then \\
./create-sbu_du-report.sh logs $VERSION $(date --iso-8601); \\
\$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
fi;
@touch \$@
do-housekeeping:
@-umount \$(MOUNT_PT)/sys
@-umount \$(MOUNT_PT)/proc
@-if mountpoint -q \$(MOUNT_PT)/run; then \\
umount \$(MOUNT_PT)/run; \\
elif [ -h \$(MOUNT_PT)/dev/shm ]; then \\
link=\$\$(readlink \$(MOUNT_PT)/dev/shm); \\
umount \$(MOUNT_PT)/\$\$link; \\
unset link; \\
else \\
umount \$(MOUNT_PT)/dev/shm; \\
fi
@-umount \$(MOUNT_PT)/dev/pts
2006-06-10 18:11:58 +02:00
@-umount \$(MOUNT_PT)/dev
@-rm /tools /cross-tools
@-if [ ! -f luser-exist ]; then \\
userdel \$(LUSER); \\
rm -rf \$(LUSER_HOME); \\
fi;
EOF
) >> $MKFILE
fi
################### BOOT #####################
if [[ "${METHOD}" = "boot" ]]; then
(
cat << EOF
all: ck_UID mk_SETUP mk_F_PREPS mk_SUDO
@sudo make restore-luser-env
@sudo make do-housekeeping
@\$(call echo_boot_finished,$VERSION)
makesys: mk_FINAL mk_CUSTOM_TOOLS mk_BLFS_TOOL
@echo "$VERSION - jhalfs build" > /etc/clfs-release
@\$(call echo_finished,$VERSION)
ck_UID:
@if [ \`id -u\` = "0" ]; then \\
echo "+--------------------------------------------------+"; \\
echo "|You cannot run this makefile from the root account|"; \\
echo "|However, if this is the boot environment |"; \\
echo "| the command you are looking for is |"; \\
echo "| make makesys |"; \\
echo "| to complete the build |"; \\
echo "+--------------------------------------------------+"; \\
exit 1; \\
fi
#---------------AS ROOT
mk_SETUP:
@\$(call echo_SU_request)
2007-04-05 19:55:48 +02:00
@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
@touch \$@
#---------------AS LUSER
mk_F_PREPS: mk_SETUP
@\$(call echo_PHASE,Final Preparations and Cross Tools)
@( \$(SU_LUSER) "make -C \$(MOUNT_PT)/\$(SCRIPT_ROOT) BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
@touch \$@
mk_SUDO: mk_F_PREPS
2007-04-05 19:55:48 +02:00
@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
@touch \$@
#---------------AS ROOT
mk_FINAL:
@\$(call echo_PHASE,Final System)
2007-04-05 19:55:48 +02:00
@( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) AS_ROOT )
@touch \$@
mk_BLFS_TOOL: mk_FINAL
@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
( make -C $BLFS_ROOT/work ); \\
fi;
@touch \$@
mk_CUSTOM_TOOLS: mk_BLFS_TOOL
@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
mkdir -p ${TRACKING_DIR}; \\
2007-04-05 19:55:48 +02:00
( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS ); \\
fi;
@touch \$@
SETUP: $host_prep
AS_LUSER: $final_preps $cross_tools $temptools ${boottools}
SUDO: $orphan_scripts
AS_ROOT: SHELL=/tools/bin/bash
AS_ROOT: $testsuitetools $basicsystem $bootscripttools $bootabletools
CUSTOM_TOOLS: $custom_list
do-housekeeping:
@-rm /tools /cross-tools
@-if [ ! -f luser-exist ]; then \\
userdel \$(LUSER); \\
rm -rf \$(LUSER_HOME); \\
fi;
EOF
) >> $MKFILE
fi
(
cat << EOF
restore-luser-env:
@\$(call echo_message, Building)
@if [ -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
mv -f \$(LUSER_HOME)/.bashrc.XXX \$(LUSER_HOME)/.bashrc; \\
fi;
@if [ -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
mv \$(LUSER_HOME)/.bash_profile.XXX \$(LUSER_HOME)/.bash_profile; \\
fi;
@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bash* && \\
touch \$@ && \\
echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
echo --------------------------------------------------------------------------------\$(WHITE)
########################################################
EOF
) >> $MKFILE
# Bring over the items from the Makefile.tmp
cat $MKFILE.tmp >> $MKFILE
rm $MKFILE.tmp
echo "Creating Makefile... ${BOLD}DONE${OFF}"
}