.gitignore

@@ -1,5 +0,0 @@
-# configuration*
-custom/config/
-menu/__pycache__/
-# pkgmngt/packInstall.sh
-# pkgmngt/packageManager.xml

BLFS/Makefile

@@ -1,233 +1,40 @@
 # From the Build Scripts Written By: Jim Gifford <lfs@jg555.com>
-# Modified By: Joe Ciccone <jciccone@linuxfromscratch.org>
+# Modified By: Joe Ciccone <jciccone@linuxfromscratch.org
 # Additional changes: George Boudreau <georgeb@linuxfromscratch.org>
-#                     Pierre Labastie <pierre.labastie at neuf.fr>
 
-ifdef V
+# $Id$
-  Q =
-else
-  Q = @
-endif
 
-# Makefile should reside in a directory where there are two subdirectories
+LANG=C
-# initially:
+LC_ALL=C
-TOPDIR           = $(shell pwd)
+TOPDIR=$(shell pwd)
-# the stylesheets
+CONFIG_CONFIG_IN = Config.in
-XSLDIR           = $(TOPDIR)/xsl
+CONFIG = menu
-# the menu program sources
-MENU             = $(TOPDIR)/menu
 
-# Those directories and files will be created and populated by make:
+all: 	menuconfig
-# directory of the book sources:
-LFS_XML          = $(TOPDIR)/lfs-xml
-BLFS_XML         = $(TOPDIR)/blfs-xml
-# contains the REV used in the preceding call:
-REVFILE          = $(TOPDIR)/revision
-# the list of packages:
-PACK_LIST        = $(TOPDIR)/packages.xml
-# the generated menu input:
-CONFIG_CONFIG_IN = $(TOPDIR)/Config.in
-# menu output:
-CONFIG_OUT       = $(TOPDIR)/configuration
-# the linear book:
-BOOK_XML         = $(TOPDIR)/book.xml
 
-LFSTMP           = $(LFS_XML)/tmp
+$(CONFIG)/conf:
-RENDERTMP        = $(BLFS_XML)/tmp
+	$(MAKE) -B -C $(CONFIG) conf
-LFS_FULL         = $(LFSTMP)/lfs-full.xml
-BLFS_FULL        = $(RENDERTMP)/blfs-full.xml
 
-# The right-hand side is updated by jhalfs:
+$(CONFIG)/mconf:
-# Where the tracking file resides:
+	$(MAKE) -B -C $(CONFIG) ncurses conf mconf
-TRACKING_DIR = tracking-dir
 
-# Will be created  by make, if not existent
+menuconfig: $(CONFIG)/mconf
-TRACKFILE        = $(TRACKING_DIR)/instpkg.xml
+	@./update_book.sh none
+	@./gen_config.sh
+	@$(CONFIG)/mconf $(CONFIG_CONFIG_IN)
+	@./gen_pkg_book.sh
 
-# Initial content of the tracking file
+config: $(CONFIG)/conf
-define INITIAL_TRACK
+	@$(CONFIG)/conf $(CONFIG_CONFIG_IN)
-<?xml version="1.0" encoding="ISO-8859-1"?>\n\
-\n\
-<!DOCTYPE sublist SYSTEM "$(TOPDIR)/packdesc.dtd">\n\
-<sublist>\n\
-  <name>Installed</name>\n\
-</sublist>
-endef
 
-# Git locations and branches
-LFS-GIT = https://git.linuxfromscratch.org/lfs.git
-LFS-BRANCH = trunk
-GIT = https://git.linuxfromscratch.org/blfs.git
-BLFS-BRANCH = trunk
-
-ALLXML := $(filter-out $(RENDERTMP)/%, \
-              $(shell if [ -d $(BLFS_XML) ]; then \
-                        find $(BLFS_XML) -name \*.xml; \
-                      fi))
-ALLXMLLFS:= $(filter-out $(LFSTMP)/%, \
-              $(shell if [ -d $(LFS_XML) ]; then \
-                        find $(LFS_XML) -name \*.xml; \
-                      fi))
-ALLXSL := $(filter-out $(RENDERTMP)/%, \
-              $(shell if [ -d $(BLFS_XML) ]; then \
-                        find $(BLFS_XML) -name \*.xsl; \
-                      fi))
-ALLXSLLFS := $(filter-out $(LFSTMP)/%, \
-              $(shell if [ -d $(LFS_XML) ]; then \
-                        find $(LFS_XML) -name \*.xsl; \
-                      fi))
-
-# Try to set the REV variable according to previous runs, except when
-# set on the command line:
-REV1 := $(shell if [ -f $(REVFILE) ] ; then cat $(REVFILE); fi)
-ifneq ($(origin REV),command line)
-  ifdef REV1
-    REV = $(REV1)
-  else
-    REV = not defined
-  endif
-endif
-
-ifneq ($(REV),sysv)
-  ifneq ($(REV),systemd)
-    $(error The REV variable is $(REV), but can only be 'sysv' or 'systemd')
-  endif
-endif
-
-$(BOOK_XML): $(CONFIG_OUT)
-	$(Q)$(TOPDIR)/gen_pkg_book.sh $(TRACKFILE) $(TOPDIR) $(BLFS_FULL) $(LFS_FULL)
-
-$(CONFIG_OUT): $(CONFIG_CONFIG_IN)
-	$(Q)CONFIG_="" KCONFIG_CONFIG=configuration \
-	    python3 $(MENU)/menuconfig.py $(CONFIG_CONFIG_IN)
-
-$(CONFIG_CONFIG_IN): $(PACK_LIST) $(XSLDIR)/gen_config.xsl
-	$(Q)xsltproc --nonet -o $@ $(XSLDIR)/gen_config.xsl $(PACK_LIST)
-
-$(PACK_LIST): $(XSLDIR)/gen_pkg_list.xsl $(XSLDIR)/specialCases.xsl $(TRACKFILE) $(LFS_FULL)
-	$(Q)xsltproc --stringparam installed-packages $(TRACKFILE) \
-	--stringparam lfs-full $(LFS_FULL) \
-	-o $@.tmp $(XSLDIR)/gen_pkg_list.xsl $(BLFS_FULL)
-	$(Q)xmllint --postvalid --format -o $@ $@.tmp
-	$(Q)rm $@.tmp
-
-# Beware of the echo '$(INITIAL_TRACK)' command below:
-# if shell is bash or sh linked to bash, needs echo -e
-# if shell is dash or sh linked to dash: echo is enough
-# Don't ask me why
-# So use /bin/echo (needs -e)
-$(TRACKFILE): $(TRACKING_DIR)
-	$(Q)if ! [ -f $@ ]; then \
-	echo Initializing $(TRACKFILE) && \
-	/bin/echo -e '$(INITIAL_TRACK)' > $@; \
-	fi
-	$(Q)for track in $(TRACKING_DIR)/*-*; do \
-	if [ -f $$track ]; then \
-	pack=$$(echo $$track | sed 's@.*/\(.*\)-[0-9c].*@\1@') && \
-	version=$$(echo $$track | sed 's@.*-\([0-9c].*\)@\1@') && \
-	xsltproc --stringparam packages $(PACK_LIST) \
-	--stringparam package $$pack \
-	--stringparam version $$version \
-	-o track.tmp $(XSLDIR)/bump.xsl $@ && \
-	sed -i 's@PACKDESC@$(TOPDIR)/packdesc.dtd@' track.tmp && \
-	xmllint --format --postvalid track.tmp > $@; \
-	fi; \
-	rm -f $$track; \
-	done; \
-	rm -f track.tmp
-
-$(TRACKING_DIR):
-	@echo Creating $(TRACKING_DIR)
-	$(Q)mkdir -p $@
-
-$(XSLDIR)/specialCases.xsl: $(TOPDIR)/gen-special.sh $(BLFS_FULL)
-	$(Q)$(TOPDIR)/gen-special.sh $(BLFS_FULL) $@
-
-ifneq ($(REV),$(REV1))
-$(BLFS_FULL): FORCE
-$(LFS_FULL): FORCE
-endif
-$(LFS_FULL): $(LFS_XML) $(LFS_XML)/general.ent $(ALLXMLLFS) $(ALLXSLLFS)
-	$(Q)cd $(LFS_XML) && if [ -x git-version.sh ] ; then \
-	     echo "Processing LFS version..."; \
-	     ./git-version.sh $(REV); \
-	fi
-	@echo "Processing LFS bootscripts..."
-	$(Q)cd $(LFS_XML) && bash process-scripts.sh
-	$(Q)[ -d $(LFSTMP) ] || mkdir -p $(LFSTMP)
-	@echo "Adjusting LFS for revision $(REV)..."
-	$(Q)xsltproc --nonet --xinclude                          \
-	             --stringparam profile.revision $(REV)       \
-	             --output $(LFSTMP)/lfs-prof.xml         \
-	             $(LFS_XML)/stylesheets/lfs-xsl/profile.xsl \
-	             $(LFS_XML)/index.xml
-	@echo "Validating the LFS book..."
-	$(Q)xmllint --nonet --noent --postvalid \
-	  -o $@ $(LFSTMP)/lfs-prof.xml
-	$(Q)rm -f $(LFS_XML)/appendices/*.script
-	$(Q)cd $(LFS_XML) && ./aux-file-data.sh $@
-	$(Q)echo $(REV) > $(REVFILE)
-
-$(BLFS_FULL): $(BLFS_XML) $(BLFS_XML)/general.ent $(ALLXML) $(ALLXSL)
-	$(Q)cd $(BLFS_XML) && if [ -x git-version.sh ] ; then \
-	     echo "Processing BLFS version..."; \
-	     ./git-version.sh $(REV); \
-	fi
-	$(Q)[ -d $(RENDERTMP) ] || mkdir -p $(RENDERTMP)
-	@echo "Adjusting BLFS for revision $(REV)..."
-	$(Q)xsltproc --nonet --xinclude                          \
-	             --stringparam profile.revision $(REV)       \
-	             --output $(RENDERTMP)/blfs-prof.xml         \
-	             $(BLFS_XML)/stylesheets/lfs-xsl/profile.xsl \
-	             $(BLFS_XML)/index.xml
-	@echo "Validating the BLFS book..."
-	$(Q)xmllint --nonet --noent --postvalid \
-	  -o $@ $(RENDERTMP)/blfs-prof.xml
-	$(Q)echo $(REV) > $(REVFILE)
-
-all: update $(BOOK_XML)
-
-# If in detached head state, "git pull" returns an error, so switch back to
-# trunk before updating, and switch back to the branch/tag afterwards
-update: $(BLFS_XML) $(LFS_XML)
-	@echo Updating the book sources
-ifneq (,$(LFS-BRANCH))
-	$(Q)cd $(LFS_XML) && \
-	git checkout trunk && \
-	git pull && \
-	if [ $(LFS-BRANCH) != trunk ]; then git checkout $(LFS-BRANCH); fi
-endif
-ifneq (,$(BLFS-BRANCH))
-	$(Q)cd $(BLFS_XML) && \
-        git checkout trunk && \
-        git pull && \
-        if [ $(BLFS-BRANCH) != trunk ]; then git checkout $(BLFS-BRANCH); fi
-endif
-
-$(LFS_XML):
-	@echo Getting the LFS book sources...
-	$(Q)git clone $(LFS-GIT) $@
-ifneq (,$(LFS-BRANCH))
-	if [ $(LFS-BRANCH) != trunk ]; then \
-	    cd $@ && \
-	    git checkout $(LFS-BRANCH); \
-	fi
-endif
-
-$(BLFS_XML):
-	@echo Getting the BLFS book sources...
-	$(Q)git clone $(GIT) $@
-ifneq (,$(BLFS-BRANCH))
-	$(Q)if [ $(BLFS-BRANCH) != trunk ]; then \
-	    cd $@ && \
-	    git checkout $(BLFS-BRANCH); \
-	fi
-endif
 # Clean up
 
 clean:
-	rm -f $(CONFIG_OUT) $(CONFIG_OUT).old $(TOPDIR)/packages.xml $(XSLDIR)/specialCases.xsl $(CONFIG_CONFIG_IN) book.xml
+	rm -f configuration configuration.old error
-	rm -rf $(TOPDIR)/dependencies $(TOPDIR)/book-html $(TOPDIR)/scripts
+	- $(MAKE) -C $(CONFIG) clean
 
-FORCE:
+clean-target:
-.PHONY: clean all update $(CONFIG_OUT) version FORCE
+	rm -f error
+	- $(MAKE) -C $(CONFIG) clean
+
+.PHONY: all menuconfig config clean clean-target $(CONFIG)/conf $(CONFIG)/mconf

BLFS/TODO

@@ -2,6 +2,7 @@
 #
 # Project TODO list
 #
+# $Id$
 #####
 
 
@@ -16,25 +17,4 @@
 
 --   Bugs hunting.
 
---   About dependencies
+--   Find a better way to define circular dependencies.
-     A. A DEPENDENCY MAY NOT BE INSTALLED EVEN IF NEEDED
-     Currently (December 10th, 2021), the dependencies are only installed
-     if either:
-     - (i)  they are not already installed
-     - (ii) their version is higher than the installed version
-     If a dependency is not installed, its dependencies are not considered.
-     But it may happen that a dependency (depB) of a dependency (depA) is in
-     case (i) or (ii) (most likely), but not depA. In this case, depB is
-     not considered, although it might happen that it is needed for the
-     requested package.
-     So the dependency system should be changed to always compute the full
-     dependency chain, and another function should be created to remove
-     packages not in case (i) or (ii) from the list of generated dependencies.
-     B. CHECKING DEPENDENCIES
-     There are several kinds of checks we might want to implement, for
-     example:
-     - (i)   check that a package can be built with only the listed
-             dependencies, and their dependencies (missing dependency)
-     - (ii)  check that the dependencies do not include dependencies
-             that are already in the dependency chain (redundant dependency)
-     - (iii) check that a dependency is really needed (false dependency)

BLFS/envars.conf

@@ -0,0 +1,91 @@
+#####
+#
+# Configuration file for the BLFS module
+#
+# $Id$
+#
+# Set default envars used in the build scripts
+#
+#####
+
+#======== Common envars ==========
+
+#--- Set a well-known working locale when building software
+export LC_ALL=C
+
+#--- The local repository for packages/file
+#    Any missing file will be downloaded and archived here,
+#    if the user has the right priviledges.
+export SRC_ARCHIVE=$SRC_ARCHIVE
+
+#--- Server used if the file isn't found in SRC_ARCHIVE.
+# As a last resort, the file will dowloaded from upstream, if possible.
+#
+# The server path MUST be set as listed in
+# http://www.linuxfromscratch.org/blfs/download.html
+export FTP_SERVER=ftp://anduin.linuxfromscratch.org/BLFS/
+
+
+#--- The sources directory.
+#    Full path to the top level directory where packages will be stored,
+#    unpacked, and compiled.
+export SRC_DIR=$HOME/sources
+
+
+#======== Xorg7 envars ===========
+
+#--- Installation prefix
+export XORG_PREFIX=/usr
+
+#--- Configure switches
+export XORG_CONFIG="--prefix=$XORG_PREFIX --sysconfdir=/etc --mandir=$XORG_PREFIX/share/man --localstatedir=/var"
+
+#======== GNOME envars ===========
+
+#--- Installation prefix
+export GNOME_PREFIX=/usr
+
+#--- If you want to install GNOME on a non standart prefix, uncomment
+#    the next export lines and edit it if needed.
+#    See also the GNOME Pre-installation Configuration HTML page for
+#    aditional required commands.
+#export PATH=$PATH:$GNOME_PREFIX/bin
+#export PKG_CONFIG_PATH=$PKG_CONFIG_PATH:$GNOME_PREFIX/lib/pkgconfig
+#export GNOME_LIBCONFIG_PATH=/usr/lib:$GNOME_PREFIX/lib
+
+#======== KDE envars =============
+
+#--- Installation prefix
+export KDE_PREFIX=/usr
+
+#--- If you want to install KDE on a non standart prefix, uncomment
+#    the next export lines and edit it if needed.
+#    See also the KDE Pre-installation Configuration HTML page for
+#    aditional required commands.
+#export PATH=$PATH:$KDE_PREFIX/bin
+#export PKG_CONFIG_PATH=$PKG_CONFIG_PATH:$KDE_PREFIX/lib/pkgconfig
+
+
+
+#======== Optimizations =============
+
+# Global optimization settings can be placed here. This settings can be
+# overrided by settings in the packages build scripts.
+
+# WARNING: The use of build optimizations may be dangerous.
+#   You should know what you are doing and be sure that the
+#   optimization settings placed below are what you want.
+#   It there are build issues or the system doesn't work as
+#   expected, please rebuild without optimizations before
+#   asking for support.
+
+#export MAKEFLAGS="-j3"
+
+#export CFLAGS="-O3 -pipe"
+#export CXXFLAGS=$CFLAGS
+#export LDFLAGS="-s"
+
+#export OTHER_CFLAGS=$CFLAGS
+#export OTHER_CXXFLAGS=$CXXFLAGS
+#export OTHER_LDFLAGS=$LDFLAGS
+

BLFS/gen-makefile.sh

@@ -1,16 +1,14 @@
 #!/bin/bash
 #
+# $Id$
+#
 set -e
 
-declare TOPDIR='..'
+# TEMPORARY VARIABLES.. development use only
-declare ATOPDIR=`cd $TOPDIR; pwd`
 declare MKFILE=Makefile
 declare PREV_PACKAGE=""
-declare BUILD_SCRIPTS=${TOPDIR}/scripts
+declare BUILD_SCRIPTS=scripts
-declare TRACKING_FILE=tracking-dir/instpkg.xml
+declare TRACKING_DIR=tracking-dir
-declare XSLDIR=${TOPDIR}/xsl
-declare PACK_FILE=${TOPDIR}/packages.xml
-declare BUMP=${XSLDIR}/bump.xsl
 
 HEADER="# This file is automatically generated by gen-makefile.sh
 # YOU MAY NEED TO EDIT THIS FILE MANUALLY
@@ -40,7 +38,7 @@ __write_build_cmd() {              #
 #----------------------------------#
 (
 cat << EOF
-	@${BUILD_SCRIPTS}/\$@ >logs/\$@ 2>&1
+	@source ../envars.conf && ${BUILD_SCRIPTS}/\$@ >logs/\$@ 2>&1
 EOF
 ) >> $MKFILE.tmp
 }
@@ -48,21 +46,51 @@ EOF
 #----------------------------------#
 __wrt_touch() {                    #
 #----------------------------------#
-local pkg_name="${1#*-?-}"
+  local pkg_name=$1
-# For having a unique id, we have added lfs- to bootscripts package.
+  local pkg_ver=$2
-# We need to remove it now.
+  local alsa_ver=$(grep "^alsa[[:space:]]" ../packages | cut -f3)
-case "$pkg_name" in lfs-bootscripts) pkg_name=bootscripts ;; esac
+  local kde_core_ver=$(grep "^kde-core[[:space:]]" ../packages | cut -f3)
+  local xorg7_ver=$(grep "^xorg7[[:space:]]" ../packages | cut -f3)
+
+  if [[ -n "$pkg_ver" ]] ; then
+(
+cat << EOF
+	@rm -f \$(TRACKING_DIR)/${pkg_name#*-?-}-{0..9}* && \\
+	touch \$(TRACKING_DIR)/${pkg_name#*-?-}-${pkg_ver}
+EOF
+) >> $MKFILE.tmp
+  fi
+
+  case $pkg_name in
+    *-alsa-lib ) #this the unique mandatory package for ALSA support.
+(
+cat << EOF
+	@rm -f \$(TRACKING_DIR)/alsa-{0..9}* && \\
+	touch \$(TRACKING_DIR)/alsa-${alsa_ver}
+EOF
+) >> $MKFILE.tmp
+      ;;
+    *-kdebase )
+(
+cat << EOF
+	@rm -f \$(TRACKING_DIR)/kde-core-{0..9}* && \\
+	touch \$(TRACKING_DIR)/kde-core-${kde_core_ver}
+EOF
+) >> $MKFILE.tmp
+      ;;
+    *-xorg7-driver ) # xtrerm2 and rman are optional
+(
+cat << EOF
+	@rm -f \$(TRACKING_DIR)/xorg7-{0..9}* && \\
+	touch \$(TRACKING_DIR)/xorg7-${xorg7_ver}
+EOF
+) >> $MKFILE.tmp
+      ;;
+  esac
 
 (
 cat << EOF
-	@xsltproc --stringparam packages ${PACK_FILE} \\
+	@touch  \$@ && \\
-	--stringparam package "${pkg_name}" \\
-	-o track.tmp \\
-	${BUMP} \$(TRACKING_FILE) && \\
-	sed -i 's@PACKDESC@${ATOPDIR}/packdesc.dtd@' track.tmp && \\
-	xmllint --format --postvalid track.tmp > \$(TRACKING_FILE) && \\
-        rm track.tmp && \\
-	touch  \$@ && \\
 	sleep .25 && \\
 	echo -e "\n\n "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
 	echo --------------------------------------------------------------------------------\$(WHITE)
@@ -75,6 +103,7 @@ EOF
 __write_entry() {            #
 #----------------------------#
   local script_name=$1
+  local pkg_ver=$2
 
   echo -n "${tab_}${tab_} entry for <$script_name>"
 
@@ -89,7 +118,7 @@ __write_entry() {            #
 
   # Include a touch of the target name so make can check
   # if it's already been made.
-  __wrt_touch "${script_name}"
+  __wrt_touch "${script_name}" "${pkg_ver}"
   #
   #--------------------------------------------------------------------#
   #              >>>>>>>> END OF Makefile ENTRY <<<<<<<<               #
@@ -97,6 +126,50 @@ __write_entry() {            #
   echo " .. OK"
 }
 
+#----------------------------#
+__write_meta_pkg_touch() {   #
+#----------------------------#
+  local meta_pkg=$1
+  local pkg_ver=$(grep "^${meta_pkg}[[:space:]]" ../packages | cut -f3)
+  local gnome_core_ver=$(grep "^gnome-core[[:space:]]" ../packages | cut -f3)
+  local kde_full_ver=$(grep "^kde-full[[:space:]]" ../packages | cut -f3)
+
+(
+cat << EOF
+
+999-z-$meta_pkg:  $PREV_PACKAGE
+	@rm -f \$(TRACKING_DIR)/${meta_pkg}-{0..9}* && \\
+	touch \$(TRACKING_DIR)/${meta_pkg}-${pkg_ver}
+EOF
+) >> $MKFILE.tmp
+
+  case $meta_pkg in
+    gnome-full )
+(
+cat << EOF
+	@rm -f \$(TRACKING_DIR)/gnome-core-{0..9}* && \\
+	touch \$(TRACKING_DIR)/gnome-core-${gnome_core_ver}
+EOF
+) >> $MKFILE.tmp
+      ;;
+    kde-koffice )
+(
+cat << EOF
+	@rm -f \$(TRACKING_DIR)/kde-full-{0..9}* && \\
+	touch \$(TRACKING_DIR)/kde-full-${kde_full_ver}
+EOF
+) >> $MKFILE.tmp
+      ;;
+  esac
+
+(
+cat << EOF
+	@touch  \$@
+EOF
+) >> $MKFILE.tmp
+
+}
+
 #----------------------------#
 generate_Makefile () {       #
 #----------------------------#
@@ -109,18 +182,36 @@ generate_Makefile () {       #
   >$MKFILE.tmp
 
 
-  for package_script in ${BUILD_SCRIPTS}/* ; do
+  for package_script in scripts/* ; do
     this_script=`basename $package_script`
+    pkg_ver=$(grep "^${this_script#*-?-}[[:space:]]" ../packages | cut -f3)
     pkg_list="$pkg_list ${this_script}"
-    __write_entry "${this_script}"
+    __write_entry "${this_script}" "${pkg_ver}"
     PREV_PACKAGE=${this_script}
   done
 
+  PACKAGE=$(basename $PWD)
+
+   # alsa, kde-core and xorg7 are also available dependencies, thus handled
+   # in another way.
+  case $PACKAGE in
+    gnome-core | \
+    gnome-full | \
+    kde-full | \
+    kde-koffice )  pkg_list="$pkg_list 999-z-${PACKAGE}"
+                  __write_meta_pkg_touch "${PACKAGE}"
+                  ;;
+  esac
+
+
+  # Add a header, some variables and include the function file
+  # to the top of the real Makefile.
 (
     cat << EOF
 $HEADER
 
-TRACKING_FILE= $TRACKING_FILE
+PACKAGE= $PACKAGE
+TRACKING_DIR= $TRACKING_DIR
 
 BOLD= ""
 RED= ""
@@ -137,7 +228,7 @@ define echo_message
 endef
 
 
-define end_message
+define fin_message
   @echo \$(BOLD)
   @echo --------------------------------------------------------------------------------
   @echo \$(BOLD) Build complete for the package \$(BLUE)\$(PACKAGE)\$(BOLD) and its dependencies
@@ -145,7 +236,7 @@ define end_message
 endef
 
 all : $pkg_list
-	@\$(call end_message )
+	@\$(call fin_message )
 EOF
 ) > $MKFILE
 
@@ -156,24 +247,18 @@ EOF
 
 }
 
-if [[ ! -d ${BUILD_SCRIPTS} ]] ; then
+if [[ -e Config.in ]] ; then
-  echo -e "\n\tThe '${BUILD_SCRIPTS}' directory has not been found.\n"
+  echo -e "\n\tThis script must be run from inside a target package directory.\n"
   exit 1
 fi
 
-# Let us make a clean base, but first ensure that we are
+if [[ ! -d scripts ]] ; then
-# not emptying a useful directory.
+  echo -e "\n\tNo ./scripts/ directory has been found.\n"
-MYDIR=$(pwd)
-MYDIR=$(basename $MYDIR)
-if [ "${MYDIR#work}" = "${MYDIR}" ] ; then
-  echo -e \\n\\tDirectory ${BOLD}$MYDIR${OFF} does not begin with \"work\"\\n
   exit 1
 fi
 
-rm -rf *
-
 generate_Makefile
 
-cp ${TOPDIR}/progress_bar.sh .
+cp ../progress_bar.sh .
 
 mkdir -p logs

BLFS/gen-special.sh

@@ -1,291 +0,0 @@
-#!/bin/bash
-
-#-------------------------------------------------------------------------
-# generates an xsl stylesheet containing a template for special
-# cases in the book:
-#  - If the version does not begin with a number, it is impossible to know
-#    where the package name ends and where the version begins. We therefore
-#    use the ENTITY at the beginning of the validated full-xml.
-#  - If a package is part of a group of xorg packages (proto, fonts, etc)
-#    there is no easy way to extract it from the xml. We use the ENTITY at
-#    the top of each file x7*.xml
-#  - Some non-versioned packages are needed as dependencies of others: we
-#    attribute version 1.0.0 to them. It is just used to know if the package
-#    is installed, by checking inst-version.
-#  - If a package is versioned but the version is not mentioned in the book
-#    (currently only udev), we retrieve the version by other means
-#-------------------------------------------------------------------------
-# Arguments:
-# $1 contains the name of the validated xml book
-# $2 contains the name of the ouput xsl file
-# $3 contains the name of the book sources directory
-#-------------------------------------------------------------------------
-
-BLFS_XML=$1
-if ! test -f ${BLFS_XML}; then
-  echo File \`${BLFS_XML}\' does not exist
-  exit 1
-fi
-SPECIAL_FILE=$2
-if test -z "${SPECIAL_FILE}"; then SPECIAL_FILE=specialCases.xsl;fi
-BLFS_DIR=$3
-if test -z "${BLFS_DIR}"; then BLFS_DIR=$(cd $(dirname ${BLFS_XML})/.. ; pwd);fi
-
-# Packages whose version does not begin with a number
-EXCEPTIONS=$(grep 'ENTITY.*version[ ]*"[^0-9"&.].*[0-9]' ${BLFS_DIR}/packages.ent |
-             sed 's@^[^"]*"\([^"]*\)".*@\1@')
-
-# Non-versioned packages:
-NV_LIST="postlfs-config-profile postlfs-config-random postlfs-config-vimrc \
-initramfs xorg-env kde-pre-install-config kf5-intro \
-lxqt-pre-install lxqt-post-install ojdk-conf tex-path"
-
-cat >$SPECIAL_FILE << EOF
-<?xml version="1.0" encoding="ISO-8859-1"?>
-
-<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-    version="1.0">
-
-<xsl:template match='*' mode="special">
-  <xsl:choose>
-<!-- Although versioned, this page is not a package. But
-     the sect2 with id "xorg-env" is referred to at several
-     places in the book. We have added it to the list of non
-     versioned packages. -->
-    <xsl:when test="@id='xorg7'">
-      <xsl:apply-templates select="child::sect2" mode="special"/>
-    </xsl:when>
-EOF
-
-# Non-versionned packages. Add to NV_LIST if you need more.
-for nv_id in $NV_LIST; do
-  cat >>$SPECIAL_FILE << EOF
-    <xsl:when test="@id='$nv_id'">
-      <xsl:text>      </xsl:text>
-      <package><xsl:text>&#xA;        </xsl:text>
-        <xsl:element name="name">$nv_id</xsl:element>
-        <xsl:text>&#xA;        </xsl:text>
-        <xsl:element name="version">1.0.0</xsl:element>
-        <xsl:if
-            test="document(\$installed-packages)//package[name=current()/@id]">
-          <xsl:text>&#xA;        </xsl:text>
-          <xsl:element name="inst-version">
-            <xsl:value-of
-              select="document(\$installed-packages
-                              )//package[name=current()/@id]/version"/>
-          </xsl:element>
-        </xsl:if>
-<!-- Dependencies -->
-        <xsl:apply-templates select=".//para[@role='required' or
-                                             @role='recommended' or
-                                             @role='optional']"
-                             mode="dependency"/>
-<!-- End dependencies -->
-        <xsl:text>&#xA;      </xsl:text>
-      </package><xsl:text>&#xA;</xsl:text>
-    </xsl:when>
-EOF
-done
-
-# Taking packages inside x7proto etc, as versionned modules.
-# We also write a dependency expansion when a dep is of the form
-# xorg7-something. Since that is another template, we need
-# a temporary file, which we shall concatenate at the end
-cat >tmpfile << EOF
-  <xsl:template name="expand-deps">
-    <xsl:param name="section"/>
-    <xsl:param name="status"/>
-    <xsl:param name="build"/>
-    <xsl:choose>
-EOF
-for file in $(ls ${BLFS_DIR}/x/installing/x7* | grep -v x7driver); do
-  id=$(grep xreflabel $file | sed 's@.*id="\([^"]*\).*@\1@')
-  cat >>$SPECIAL_FILE << EOF
-    <xsl:when test="@id='$id'">
-      <xsl:text>      </xsl:text>
-      <package><xsl:text>&#xA;        </xsl:text>
-        <xsl:element name="name">$id</xsl:element>
-        <xsl:text>&#xA;        </xsl:text>
-EOF
-  cat >> tmpfile << EOF
-      <xsl:when test="\$section='$id'">
-EOF
-# We extract the list of packages for an xorg page from
-# the version part of the .xml file. Seems that
-# the order is not always the same as in the "cat" command.
-# So we have to read that command too, since it may be assumed
-# that the preceding package is a dependency of the following,
-# except the first.
-  list_cat="$(sed -n '/>cat/,/EOF</p' $file | grep -v 'cat\|EOF\|#' |
-              awk '{ print $NF }' | sed 's/-&.*//')"
-
-# Rationale for the sed below: the following for breaks words at spaces (unless
-# we tweak IFS). So replace spaces with commas in lines so that only newlines
-# are separators.
-  for pack in \
-      $(grep 'ENTITY.*version' $file | sed 's/[ ]\+/,/g'); do
-    packname=$(echo $pack | sed s'@.*ENTITY,\(.*\)-version.*@\1@')
-    packversion=$(echo $pack | sed 's@[^"]*"\([^"]*\).*@\1@')
-    precpack=NONE
-    for i in $list_cat; do
-      if [ "$i" = "$packname" ]; then break; fi
-      precpack=$i
-    done
-# It may happen that packname is not in list_cat, because its entity
-# is commented out in the xml, but we do not check that (too complicated).
-# In that case, the whole list is scanned, and $precpack=$i at the end.
-# when packname is found in the list $precpack!=$i.
-    if [ "$precpack" = "$i" ]; then continue; fi
-    cat >>$SPECIAL_FILE << EOF
-        <module><xsl:text>&#xA;          </xsl:text>
-          <xsl:element name="name">$packname</xsl:element>
-          <xsl:element name="version">$packversion</xsl:element>
-          <xsl:if test="document(\$installed-packages)//package[name='$packname']">
-            <xsl:element name="inst-version">
-              <xsl:value-of
-                select="document(\$installed-packages
-                                )//package[name='$packname']/version"/>
-            </xsl:element>
-          </xsl:if>
-<!-- Dependencies -->
-EOF
-    if test $precpack != NONE; then
-      cat >>$SPECIAL_FILE << EOF
-          <xsl:element name="dependency">
-            <xsl:attribute name="status">required</xsl:attribute>
-            <xsl:attribute name="build">before</xsl:attribute>
-            <xsl:attribute name="name">$precpack</xsl:attribute>
-            <xsl:attribute name="type">ref</xsl:attribute>
-          </xsl:element>
-EOF
-    else
-      cat >>$SPECIAL_FILE << EOF
-          <xsl:apply-templates select=".//para[@role='required' or
-                                               @role='recommended' or
-                                               @role='optional']"
-                               mode="dependency"/>
-EOF
-    fi
-    cat >>$SPECIAL_FILE << EOF
-<!-- End dependencies -->
-        </module>
-EOF
-#    cat >> tmpfile << EOF
-#        <xsl:element name="dependency">
-#          <xsl:attribute name="status">
-#            <xsl:value-of select="\$status"/>
-#          </xsl:attribute>
-#          <xsl:attribute name="build">
-#            <xsl:value-of select="\$build"/>
-#          </xsl:attribute>
-#          <xsl:attribute name="name">$packname</xsl:attribute>
-#          <xsl:attribute name="type">ref</xsl:attribute>
-#        </xsl:element>
-#EOF
-    precpack=$packname
-  done
-  cat >>$SPECIAL_FILE << EOF
-     </package>
-   </xsl:when>
-EOF
-  cat >> tmpfile << EOF
-        <xsl:element name="dependency">
-          <xsl:attribute name="status">
-            <xsl:value-of select="\$status"/>
-          </xsl:attribute>
-          <xsl:attribute name="build">
-            <xsl:value-of select="\$build"/>
-          </xsl:attribute>
-          <xsl:attribute name="name">$packname</xsl:attribute>
-          <xsl:attribute name="type">ref</xsl:attribute>
-        </xsl:element>
-      </xsl:when>
-EOF
-done
-
-for ver_ent in $EXCEPTIONS; do
-  id=$(grep 'xreflabel=".*'$ver_ent $BLFS_XML | sed 's@.*id="\([^"]*\)".*@\1@')
-  [[ -z $id ]] && continue
-  cat >>$SPECIAL_FILE << EOF
-    <xsl:when test="@id='$id'">
-<!-- if there is a sect1 ancestor, we have a module -->
-      <xsl:choose>
-        <xsl:when test="ancestor::sect1">
-          <xsl:text>        </xsl:text>
-          <module><xsl:text>&#xA;          </xsl:text>
-            <xsl:element name="name">$id</xsl:element>
-            <xsl:text>&#xA;          </xsl:text>
-            <xsl:element name="version">$ver_ent</xsl:element>
-            <xsl:if
-                test="document(\$installed-packages)//package[name=current()/@id]">
-              <xsl:text>&#xA;          </xsl:text>
-              <xsl:element name="inst-version">
-                <xsl:value-of
-                  select="document(\$installed-packages
-                                  )//package[name=current()/@id]/version"/>
-              </xsl:element>
-            </xsl:if>
-<!-- Dependencies -->
-            <xsl:apply-templates select=".//para[@role='required' or
-                                                 @role='recommended' or
-                                                 @role='optional']"
-                                 mode="dependency"/>
-<!-- End dependencies -->
-            <xsl:text>&#xA;        </xsl:text>
-          </module><xsl:text>&#xA;</xsl:text>
-        </xsl:when>
-        <xsl:otherwise>
-          <xsl:text>      </xsl:text>
-          <package><xsl:text>&#xA;        </xsl:text>
-            <xsl:element name="name">$id</xsl:element>
-            <xsl:text>&#xA;        </xsl:text>
-            <xsl:element name="version">$ver_ent</xsl:element>
-            <xsl:if
-                test="document(\$installed-packages)//package[name=current()/@id]">
-              <xsl:text>&#xA;        </xsl:text>
-              <xsl:element name="inst-version">
-                <xsl:value-of
-                  select="document(\$installed-packages
-                                  )//package[name=current()/@id]/version"/>
-              </xsl:element>
-            </xsl:if>
-<!-- Dependencies -->
-            <xsl:apply-templates select=".//para[@role='required' or
-                                                 @role='recommended' or
-                                                 @role='optional']"
-                                 mode="dependency"/>
-<!-- End dependencies -->
-            <xsl:text>&#xA;      </xsl:text>
-          </package><xsl:text>&#xA;</xsl:text>
-        </xsl:otherwise>
-      </xsl:choose>
-    </xsl:when>
-EOF
-done
-
-cat >>$SPECIAL_FILE << EOF
-    <xsl:otherwise>
-        <xsl:apply-templates
-           select="self::node()[contains(translate(@xreflabel,
-                                                  '123456789',
-                                                  '000000000'),
-                                         '-0')
-                               ]"
-           mode="normal"/>
-    </xsl:otherwise>
-  </xsl:choose>
-</xsl:template>
-EOF
-cat $SPECIAL_FILE tmpfile > tmpfile1
-mv tmpfile1 $SPECIAL_FILE
-rm tmpfile
-cat >> $SPECIAL_FILE << EOF
-    <xsl:otherwise>
-      <xsl:message>
-        <xsl:text>You should not be seeing this</xsl:text>
-      </xsl:message>
-    </xsl:otherwise>
-  </xsl:choose>
-</xsl:template>
-</xsl:stylesheet>
-EOF

BLFS/gen_config.sh

@@ -0,0 +1,288 @@
+#!/bin/bash
+#
+# $Id$
+#
+
+export outFile=Config.in	# file for reading and writing to.
+export inFile=packages		# file for reading and writing to.
+
+declare PKG_NAME
+declare PKG_XML_FILE
+declare PKG_DIR
+declare PKG_VER
+declare INST_VER
+declare INST_STRING
+declare SAVE_IFS=${IFS}
+declare -a DIR_TREE
+declare PREV_DIR1="none"
+declare PREV_DIR2="none"
+declare MENU_SET1="n"
+declare MENU_SET2="n"
+
+> $outFile
+
+#---------------------#
+#         MAIN        #
+#---------------------#
+: <<enddoc
+  This script will create a Config.in file from the contents
+  of the file <packages>.
+  Packages previously installed will not be included.
+enddoc
+
+echo -en "\tGenerating Config.in from package data ..."
+while [ 0 ]
+do
+
+#  read -r || break 1
+  read || break 1
+
+  set -- $REPLY
+  PKG_NAME=$1
+  PKG_XML_FILE=$(basename $2)
+  PKG_DIR=$(dirname $2)
+  PKG_VER=$3
+  INST_VER=$4
+    # These are the META packages.
+  if [ $PKG_DIR = "." ]; then
+    SET_COMMENT=y
+      # Do not include previously installed packages
+    if [ -n "${PKG_VER}" ] && [[ "x${PKG_VER}" = "x${INST_VER}" ]]; then
+      continue
+    fi
+      # Do not include installed packages newer than the book ones
+    if [ -n "${PKG_VER}" ] && [[ "x${PKG_VER}" < "x${INST_VER}" ]]; then
+      continue
+    fi
+      # Set installed version for updated meta-packages
+    [ -n "${INST_VER}" ] && INST_STRING="[installed ${INST_VER}]"
+
+    META_PKG=$(echo ${PKG_NAME} | tr [a-z] [A-Z])
+(
+cat << EOF
+	config	CONFIG_$META_PKG
+		bool	"$META_PKG $PKG_VER $INST_STRING"
+		default	n
+
+		menu	"$(echo ${PKG_NAME} | tr [a-z] [A-Z]) components"
+			depends	CONFIG_$META_PKG
+
+EOF
+) >> $outFile
+
+    unset INST_STRING
+
+         # Include the dependency data for this meta package
+       while [ 0 ]; do
+         read || break 1
+         PKG_NAME=${REPLY}
+         PKG_VER=$(grep "^${PKG_NAME}[[:space:]]" $inFile | cut -f3)
+         INST_VER=$(grep "^${PKG_NAME}[[:space:]]" $inFile | cut -f4)
+           # Skip installed meta-package components
+         if [ -n "${PKG_VER}" ] && [[ "x${PKG_VER}" = "x${INST_VER}" ]]; then
+           continue
+         fi
+          # Do not include installed packages newer than the book ones
+         if [ -n "${PKG_VER}" ] && [[ "x${PKG_VER}" < "x${INST_VER}" ]]; then
+           continue
+         fi
+           # Set installed version for updated meta-packages components
+         [ -n "${INST_VER}" ] && INST_STRING="[installed ${INST_VER}]"
+(
+cat << EOF
+	config	DEP_${META_PKG}_${PKG_NAME}
+		bool	"$PKG_NAME ${PKG_VER} ${INST_STRING}"
+		default	y
+
+EOF
+) >> $outFile
+         unset INST_STRING
+       done <./libs/${PKG_NAME}.dep
+     echo -e "endmenu" >> $outFile
+    continue
+  fi
+  [[ "${SET_COMMENT}" = "y" ]] && echo "comment \"\"" >>$outFile; unset SET_COMMENT
+
+    # Deal with targets that are part of a meta-package but that are in the same
+    # directory that non meta-package targets
+  case ${PKG_NAME} in
+     alsa-* | \
+     xorg7-* | \
+     x-config | \
+     x-setup | \
+     libXau | \
+     libxcb | \
+     libXdmcp | \
+     luit | \
+     xbitmaps | \
+     xcb-proto | \
+     xkeyboard-config | \
+     mesalib | \
+     libdrm ) continue ;;
+  esac
+
+    # Skip installed packages
+  if [ -n "${PKG_VER}" ] && [[ "x${PKG_VER}" = "x${INST_VER}" ]]; then
+    continue
+  fi
+    # Do not include installed packages newer than the book ones
+  if [ -n "${PKG_VER}" ] && [[ "x${PKG_VER}" < "x${INST_VER}" ]]; then
+    continue
+  fi
+    # Set installed version for updated packages
+  [ -n "${INST_VER}" ] && INST_STRING="[installed ${INST_VER}]"
+
+  IFS="/"
+  DIR_TREE=(${PKG_DIR})
+  IFS="$SAVE_IFS"
+
+    # Define a top level menu
+  if [ "$PREV_DIR1" != "${DIR_TREE[1]}" ]; then
+    [[ "${DIR_TREE[1]}" = "kde" ]] && continue
+    [[ "${DIR_TREE[1]}" = "gnome" ]] && continue
+
+    if [ $MENU_SET1 = "y" ]; then
+      # Close out any open secondary menu
+      if [ $MENU_SET2 = "y" ]; then
+        echo -e "\tendmenu" >> $outFile
+        # Reset 'menu open' flag
+        MENU_SET2="n"
+      fi
+      # Close the current top level menu
+      echo -e "endmenu\n" >> $outFile
+    fi
+    # Open a new top level menu
+    echo -e "menu "$(echo ${DIR_TREE[1]:0:1} | tr [a-z] [A-Z])${DIR_TREE[1]:1}"" >> $outFile
+    MENU_SET1="y"
+  fi
+
+    # Define a secondary menu
+  if [ "$PREV_DIR2" != "${DIR_TREE[2]}" ]; then
+      # Close out the previous open menu structure
+    if [ $MENU_SET2 = "y" ]; then
+      echo -e "\tendmenu\n"  >> $outFile
+    fi
+      # Initialize a new 2nd level menu structure.
+    echo -e "\tmenu "$(echo ${DIR_TREE[2]:0:1} | tr [a-z] [A-Z])${DIR_TREE[2]:1}"" >> $outFile
+    MENU_SET2="y"
+  fi
+(
+cat << EOF
+	config CONFIG_$PKG_NAME
+		bool "$PKG_NAME ${PKG_VER} ${INST_STRING}"
+		default n
+EOF
+) >> $outFile
+
+  unset INST_STRING
+
+  PREV_DIR1=${DIR_TREE[1]}
+  PREV_DIR2=${DIR_TREE[2]}
+done <"$inFile"
+
+if [ $MENU_SET2 = "y" ]; then echo -e "\tendmenu" >> $outFile; fi
+if [ $MENU_SET1 = "y" ]; then echo "endmenu" >> $outFile; fi
+
+(
+cat << EOF
+
+comment	""
+
+menu	"Default packages for resolving dependencies"
+
+choice
+	prompt	"Default print server"
+	config	PS_cups
+		bool	"cups"
+	config	PS_LPRng
+		bool	"LPRng"
+endchoice
+config	PRINT_SERVER
+	string
+	default	cups	if PS_cups
+	default	LPRng	if PS_LPRng
+
+choice
+	prompt	"Mail server"
+	config	MS_sendmail
+		bool	"sendmail"
+	config	MS_postfix
+		bool	"postfix"
+	config	MS_exim
+		bool	"exim"
+endchoice
+config	MAIL_SERVER
+	string
+	default	sendmail	if MS_sendmail
+	default	postfix		if MS_postfix
+	default	exim		if MS_exim
+
+choice
+	prompt	"Postscript package"
+	config	GS_espgs
+		bool	"espgs"
+	config	GS_ghostscript
+		bool	"ghostscript"
+endchoice
+config	GHOSTSCRIPT
+	string
+	default	espgs       if GS_espgs
+	default ghostscript if GS_ghostscript
+
+choice
+	prompt	"Kerberos 5"
+	config	KER_mitkrb
+		bool	"mitkrb"
+	config	KER_heimdal
+		bool	"heimdal"
+endchoice
+config	KBR5
+	string
+	default	heimdal	if KER_heimdal
+	default mitkrb	if KER_mitkrb
+
+choice
+	prompt	"Window package"
+	config	WIN_xorg7
+	bool	"Xorg7"
+	config	WIN_xfree86
+	bool	"xfree86"
+endchoice
+config	X11
+	string
+	default	xorg7	if WIN_xorg7
+	default xfree86	if WIN_xfree86
+endmenu
+
+choice
+	prompt	"Dependency level"
+	default DEPLVL_2
+
+	config	DEPLVL_1
+	bool	"Required dependencies only"
+
+	config	DEPLVL_2
+	bool	"Required and recommended dependencies"
+
+	config	DEPLVL_3
+	bool	"Required, recommended and optional dependencies"
+
+endchoice
+config	optDependency
+	int
+	default	1	if DEPLVL_1
+	default	2	if DEPLVL_2
+	default	3	if DEPLVL_3
+
+
+config	SUDO
+	bool "Build as User"
+	default	y
+	help
+		Select if sudo will be used (you want build as a normal user)
+		        otherwise sudo is not needed (you want build as root)
+EOF
+) >> $outFile
+echo "done"
+
+

BLFS/gen_pkg_book.sh

@@ -1,62 +1,27 @@
 #!/bin/bash
 #
+# $Id$
+#
 #  Read and parse the configuration parameters..
 #
 set -e
 
-TRACKFILE=$1
+declare -r ConfigFile="configuration"
-if test -z "$TRACKFILE"; then
+declare TARGET
-  TRACKFILE=tracking-dir/instpkg.xml
-fi
-TOPDIR=$2
-if test -z "$TOPDIR"; then
-  TOPDIR=$(pwd)
-fi
-BLFS_FULL=$3
-if test -z "$BLFS_FULL"; then
-  BLFS_FULL=${TOPDIR}/blfs-xml/tmp/blfs-full.xml
-fi
-LFS_FULL=$4
-if test -z "$LFS_FULL"; then
-  LFS_FULL=${TOPDIR}/lfs-xml/tmp/lfs-full.xml
-fi
-declare -r ConfigFile="${TOPDIR}/configuration"
-declare DepDir="${TOPDIR}/dependencies"
-declare LibDir="${TOPDIR}/libs"
-declare PackFile="${TOPDIR}/packages.xml"
-declare BookXml="${TOPDIR}/book.xml"
-declare MakeBook="${TOPDIR}/xsl/make_book.xsl"
-declare GetVersion="${TOPDIR}/xsl/get_version.xsl"
-declare MakeScripts="${TOPDIR}/xsl/scripts.xsl"
-declare ListLFS="${TOPDIR}/xsl/list_lfs.xsl"
-declare BookHtml="${TOPDIR}/book-html"
-declare BLFS_XML="${TOPDIR}/blfs-xml"
-declare -a TARGET
 declare DEP_LEVEL
 declare SUDO
-declare LANGUAGE
+declare PKGXML
-declare WRAP_INSTALL
+declare BLFS_XML
-declare PACK_INSTALL
+declare VERBOSITY=1
-declare DEL_LA_FILES
-declare STATS
-declare DEP_CHECK
-declare SRC_ARCHIVE
-declare SRC_SUBDIRS
-declare BUILD_ROOT
-declare BUILD_SUBDIRS
-declare KEEP_FILES
-declare -i JOBS
-declare CFG_CFLAGS
-declare CFG_CXXFLAGS
-declare CFG_LDFLAGS
 
 #--------------------------#
 parse_configuration() {    #
 #--------------------------#
-  local	-i cntr=0
+  local	cntr
-  local	-a optTARGET
+  local	optTARGET
 
-  while read; do
+  while [ 0 ]; do
+    read || break 1
 
     # Garbage collection
     case ${REPLY} in
@@ -64,78 +29,96 @@ parse_configuration() {    #
     esac
 
     case "${REPLY}" in
+      CONFIG_ALSA=* | \
+      CONFIG_GNOME-CORE=* | \
+      CONFIG_GNOME-FULL=* | \
+      CONFIG_KDE-CORE=* | \
+      CONFIG_KDE-FULL=* | \
+      CONFIG_KDE-KOFFICE=* | \
+      CONFIG_XORG7=* ) REPLY=${REPLY%=*}  # Strip the trailing '=y' test.. unecessary
+                       echo -n "${REPLY}"
+                       if [[ $((++cntr)) > 1 ]]; then
+                         echo "  <<-- ERROR:: SELECT ONLY 1 PACKAGE AT A TIME, META-PACKAGE NOT SELECTED"
+                       else
+                         echo ""
+                         optTARGET=$(echo $REPLY | cut -d "_" -f2 | tr [A-Z] [a-z])
+                       fi
+                       continue ;;
+
       # Create global variables for these parameters.
       optDependency=* | \
+      PRINT_SERVER=*  | \
       MAIL_SERVER=*   | \
-      WRAP_INSTALL=*  | \
+      GHOSTSCRIPT=*   | \
-      PACK_INSTALL=*  | \
+      KBR5=*  | \
-      DEL_LA_FILES=*  | \
+      X11=*   | \
-      STATS=*         | \
+      SUDO=*  )  eval ${REPLY} # Define/set a global variable..
-      DEP_CHECK=*     | \
-      LANGUAGE=*      | \
-      SUDO=*          | \
-      SRC_ARCHIVE=*   | \
-      SRC_SUBDIRS=*   | \
-      BUILD_ROOT=*    | \
-      BUILD_SUBDIRS=* | \
-      KEEP_FILES=*    | \
-      JOBS=*          | \
-      CFG_CFLAGS=*    | \
-      CFG_CXXFLAGS=*  | \
-      CFG_LDFLAGS=*   )  eval ${REPLY} # Define/set a global variable..
                       continue ;;
     esac
 
     if [[ "${REPLY}" =~ ^CONFIG_ ]]; then
-      echo "$REPLY"
+      echo -n "$REPLY"
-      optTARGET[$((cntr++))]=$( echo $REPLY | sed -e 's@CONFIG_@@' -e 's@=y@@' )
+      if [[ $((++cntr)) > 1 ]]; then
+        echo "  <<-- ERROR SELECT ONLY 1 PACKAGE AT A TIME, WILL NOT BUILD"
+      else
+        echo ""
+        optTARGET=$( echo $REPLY | sed -e 's@CONFIG_@@' -e 's@=y@@' )
       fi
-  done < $ConfigFile
+    fi
+  done <$ConfigFile
 
-  if (( $cntr == 0 )); then
+  if [[ $optTARGET = "" ]]; then
-    echo -e "\n>>> NO TARGET SELECTED.. application terminated"
+    echo -e "\n>>> NO TARGET SELECTED.. applicaton terminated"
-    echo -e "    Run <make> again and select (a) package(s) to build\n"
+    echo -e "    Run <make> again and select a package to build\n"
     exit 0
   fi
-  TARGET=(${optTARGET[*]})
+
+  TARGET=$optTARGET
   DEP_LEVEL=$optDependency
   SUDO=${SUDO:-n}
-  WRAP_INSTALL=${WRAP_INSTALL:-n}
-  DEL_LA_FILES=${DEL_LA_FILES:-n}
-  STATS=${STATS:-n}
-# Other boolean variables are supposed to be either set or unset. Their values
-# are not relevant
 }
 
 #--------------------------#
 validate_configuration() { #
 #--------------------------#
   local -r dotSTR=".................."
-  local -r PARAM_LIST="DEP_LEVEL SUDO LANGUAGE MAIL_SERVER WRAP_INSTALL PACK_INSTALL DEL_LA_FILES STATS DEP_CHECK SRC_ARCHIVE SRC_SUBDIRS BUILD_ROOT BUILD_SUBDIRS KEEP_FILES JOBS CFG_CFLAGS CFG_CXXFLAGS CFG_LDFLAGS"
+  local -r PARAM_LIST="TARGET DEP_LEVEL SUDO PRINT_SERVER MAIL_SERVER GHOSTSCRIPT KBR5 X11"
   local -r PARAM_VALS='${config_param}${dotSTR:${#config_param}} ${L_arrow}${BOLD}${!config_param}${OFF}${R_arrow}'
   local config_param
-  local -i index
 
   for config_param in ${PARAM_LIST}; do
     echo -e "`eval echo $PARAM_VALS`"
   done
-  for (( index=0 ; index < ${#TARGET[*]} ; index ++ )); do
-    echo -e "TARGET${index}${dotSTR:6} ${L_arrow}${BOLD}${TARGET[${index}]}${OFF}${R_arrow}"
-  done
 }
 
 #
-# Generates the root of the dependency tree
+# Regenerate the META-package dependencies from the configuration file
 #
 #--------------------------#
-generate_deps() {          #
+regenerate_deps() {        #
 #--------------------------#
 
-  local -i index
+  rm -f libs/*.dep-MOD
-  local DepDir=$1
+  while [ 0 ]; do
-  rm -f $DepDir/*.{tree,dep}
+    read || break 1
-  for (( index=0 ; index < ${#TARGET[*]} ; index ++ )); do
+    case ${REPLY} in
-    echo 1 b ${TARGET[${index}]} >> $DepDir/root.dep
+      \#* | '') continue ;;
+    esac
+
+    # Drop the "=y"
+    REPLY=${REPLY%=*}
+    if [[ "${REPLY}" =~ ^DEP_ ]]; then
+      META_PACKAGE=$(echo $REPLY | cut -d "_" -f2 | tr [A-Z] [a-z])
+      DEP_FNAME=$(echo $REPLY | cut -d "_" -f3)
+       echo "${DEP_FNAME}" >>libs/${META_PACKAGE}.dep-MOD
+    fi
+
+  done <$ConfigFile
+  #
+  # Replace to 'old' dependency file with a new one.
+  #
+  for dst in `ls ./libs/*.dep-MOD 2>/dev/null`; do
+    cp -vf $dst ${dst%-MOD}
   done
 }
 
@@ -148,23 +131,29 @@ generate_deps() {          #
 clean_configuration() {    #
 #--------------------------#
 
-tail -n 15 ${ConfigFile} > ${ConfigFile}.tmp
+tail -n 29 configuration > configuration.tmp
-mv ${ConfigFile}.tmp ${ConfigFile}
+mv configuration.tmp configuration
 
 }
 
 #---------------------
 # Constants
-source ${LibDir}/constants.inc
+source libs/constants.inc
 [[ $? > 0 ]] && echo -e "\n\tERROR: constants.inc did not load..\n" && exit
 
 #---------------------
 # Dependencies module
-source ${LibDir}/func_dependencies
+source libs/func_dependencies
 [[ $? > 0 ]] && echo -e "\n\tERROR: func_dependencies did not load..\n" && exit
 
+#---------------------
+# parser module
+source libs/func_parser
+[[ $? > 0 ]] && echo -e "\n\tERROR: func_parser did not load..\n" && exit
+
+
 #------- MAIN --------
-if [[ ! -f ${PackFile} ]] ; then
+if [[ ! -f packages ]] ; then
   echo -e "\tNo packages file has been found.\n"
   echo -e "\tExecution aborted.\n"
   exit 1
@@ -181,166 +170,9 @@ if [ x$ANSWER != "xyes" ] ; then
   exit 1
 fi
 echo "${nl_}${SD_BORDER}${nl_}"
-
+regenerate_deps
-rm -rf $DepDir
+generate_dependency_tree
-mkdir $DepDir
+generate_TARGET_xml
-generate_deps $DepDir
+generate_target_book
-pushd $DepDir > /dev/null
+create_build_scripts "${SUDO}"
-set +e
+clean_configuration
-generate_subgraph root.dep 1 1 b
-echo -e "\n${SD_BORDER}"
-echo Graph contains $(ls |wc -l) nodes
-echo -e "${SD_BORDER}"
-echo Cleaning subgraph...
-clean_subgraph
-echo done
-echo Generating the tree
-echo 1 >  root.tree
-echo 1 >> root.tree
-cat root.dep >> root.tree
-generate_dependency_tree root.tree 1
-echo -e "\n${SD_BORDER}"
-echo Generating the ordered full dependency list
-FULL_LIST="$(tree_browse root.tree)"
-set -e
-popd > /dev/null
-#echo "$FULL_LIST"
-#echo -e \\n provisional end...
-#exit
-echo Generating the ordered package list
-LIST=
-while read p; do
-    if [ "$p" != "${p%-pass1}" ]; then
-# If the pass2 is installed, no need for pass1. We get its
-# installed version from TRACKFILE; We could use PackFile, but
-# the test would be slightly more complicated.
-echo Treating $p
-        pass2_v=$(xsltproc --stringparam package "${p%-pass1}" \
-                  $GetVersion $TRACKFILE | head -n1)
-echo Found pass2_v=$pass2_v
-        if [ -n "$pass2_v" ]; then continue; fi
-# We need to get the installed version from TRACKFILE
-        inst_v=$(xsltproc --stringparam package "$p" $GetVersion $TRACKFILE | \
-                 head -n1)
-        if [ -z "$inst_v" ]; then inst_v=0; fi
-echo Found inst_v=$inst_v
-# The available version is taken from PackFile
-        avail_v=$(xsltproc --stringparam package "${p%-pass1}" \
-		  $GetVersion $PackFile | head -n1)
-echo Found avail_v=$avail_v
-        versions="$avail_v
-$inst_v"
-	echo which gives versions=$versions
-    else
-        versions=$(xsltproc --stringparam package "$p" $GetVersion $PackFile)
-    fi
-    if [ "$versions" != "$(sort -V <<<$versions)" ]; then
-        LIST="$LIST $p"
-    fi
-done <<<$FULL_LIST
-#echo \""$LIST"\"
-#echo -e \\n provisional end...
-#exit
-rm -f ${BookXml}
-echo Making XML book
-xsltproc --stringparam list    "$LIST"        \
-         --stringparam MTA     "$MAIL_SERVER" \
-         --stringparam lfsbook "$LFS_FULL"    \
-         -o ${BookXml} \
-         ${MakeBook} \
-         $BLFS_FULL
-echo "making HTML book (may take some time...)"
-xsltproc -o ${BookHtml}/ \
-         -stringparam chunk.quietly 1 \
-         ${BLFS_XML}/stylesheets/blfs-chunked.xsl \
-         ${BookXml}
-if [ ! -d ${BookHtml}/stylesheets ]
-  then mkdir -p ${BookHtml}/stylesheets
-  cp ${BLFS_XML}/stylesheets/lfs-xsl/*.css ${BookHtml}/stylesheets
-fi
-if [ ! -d ${BookHtml}/images ]
-  then mkdir -p ${BookHtml}/images
-  cp ${BLFS_XML}/images/*.png ${BookHtml}/images
-fi
-for ht in ${BookHtml}/*.html
-  do sed -i 's@\.\./stylesheets@stylesheets@' $ht
-  sed -i 's@\.\./images@images@' $ht
-done
-echo -en "\n\tGenerating the build scripts ...\n"
-rm -rf scripts
-if test $STATS = y; then
-  LIST_STAT="${TARGET[*]}"
-else
-  LIST_STAT=""
-fi
-xsltproc --xinclude --nonet                           \
-         --stringparam language      "$LANGUAGE"      \
-         --stringparam sudo          "$SUDO"          \
-         --stringparam wrap-install  "$WRAP_INSTALL"  \
-         --stringparam pack-install  "$PACK_INSTALL"  \
-         --stringparam del-la-files  "$DEL_LA_FILES"  \
-         --stringparam list-stat     "$LIST_STAT"     \
-         --stringparam src-archive   "$SRC_ARCHIVE"   \
-         --stringparam src-subdirs   "$SRC_SUBDIRS"   \
-         --stringparam build-root    "$BUILD_ROOT"    \
-         --stringparam build-subdirs "$BUILD_SUBDIRS" \
-         --stringparam keep-files    "$KEEP_FILES"    \
-         --param       jobs          "$JOBS"          \
-         --stringparam cfg-cflags    "$CFG_CFLAGS"    \
-         --stringparam cfg-cxxflags  "$CFG_CXXFLAGS"  \
-         --stringparam cfg-ldflags   "$CFG_LDFLAGS"   \
-	 --stringparam fqdn          "$(hostname -f)" \
-         --output      ./scripts/                     \
-         ${MakeScripts}                               \
-         ${BookXml}
-# Make the scripts executable.
-chmod -R +x scripts
-echo -e "done\n"
-
-if [ -n "$DEP_CHECK" ]; then
-   if (( ${#TARGET[*]} != 1 )); then
-      printf "\nWARNING: If dependencies are checked, only one package\n"
-      printf "         shoud be selected. Not generating check code.\n"
-      exit
-   fi
-
-   LIST_LFS="$(xsltproc $ListLFS $LFS_FULL)"
-   LIST_NEEDED="$(echo $FULL_LIST)"
-   LIST_INSTALLED="$(porg -a | sed 's/-[[:digit:]].*//')"
-   LIST_UNNEEDED=
-   for p in $LIST_INSTALLED; do
-      case " $LIST_LFS " in *" $p "*)  continue ;; esac
-      case " $LIST_NEEDED " in *" $p "*)  continue ;; esac
-      LIST_UNNEEDED="$LIST_UNNEEDED $p"
-   done
-   cat >head.tmp <<EOF
-#!/bin/bash
-set -e
-
-# Remove all unneeded packages
-VERSIONED_LIST=
-for p in $LIST_UNNEEDED; do
-   VERSIONED_LIST="\$VERSIONED_LIST \$(porg \$p)"
-   sudo porg -rb \$p
-done
-
-# Function to restore packages
-restore_pack () {
-for p in \$VERSIONED_LIST; do
-   sudo porgball -e -l /var/lib/packages/\${p}.porg.tar.gz
-done
-}
-
-trap restore_pack ERR
-
-EOF
-   cat >tail.tmp <<EOF
-restore_pack
-exit
-EOF
-
-   sed -e "1,2d" -e '$d' scripts/*${TARGET} >script.tmp
-   cat head.tmp script.tmp tail.tmp >scripts/*${TARGET}
-   rm *.tmp
-fi
-#clean_configuration

BLFS/libs/book.xsl

@@ -0,0 +1,105 @@
+<?xml version='1.0' encoding='ISO-8859-1'?>
+
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+                xmlns="http://www.w3.org/1999/xhtml"
+                version="1.0">
+
+<!-- $Id$ -->
+
+  <!-- NOTE: the base dir (blfs-xml) is set to the proper dir
+  via a sed in ./blfs -->
+  <xsl:import href="../blfs-xml/stylesheets/blfs-chunked.xsl"/>
+
+  <xsl:param name="mail_server" select="sendmail"/>
+
+  <xsl:param name="xwindow" select="xorg7"/>
+
+     <!-- Template from BLFS_XML/stylesheets/xhtml/lfs-xref.xsl.-->
+  <xsl:template match="xref" name="xref">
+
+    <!-- IDs that need be remaped to the proper file -->
+    <xsl:variable name="linkend">
+      <xsl:choose>
+        <xsl:when test="@linkend = 'alsa'">
+          <xsl:text>alsa-lib</xsl:text>
+        </xsl:when>
+        <xsl:when test="@linkend = 'arts'">
+          <xsl:text>aRts</xsl:text>
+        </xsl:when>
+        <xsl:when test="@linkend = 'kde'">
+          <xsl:text>kdelibs</xsl:text>
+        </xsl:when>
+        <xsl:when test="@linkend = 'server-mail'">
+          <xsl:value-of select="$mail_server"/>
+        </xsl:when>
+        <xsl:when test="@linkend = 'x-window-system'">
+          <xsl:value-of select="$xwindow"/>
+        </xsl:when>
+        <xsl:otherwise>
+          <xsl:value-of select="@linkend"/>
+        </xsl:otherwise>
+      </xsl:choose>
+    </xsl:variable>
+
+    <xsl:variable name="targets" select="key('id',$linkend)"/>
+    <!-- -->
+
+    <xsl:variable name="target" select="$targets[1]"/>
+    <xsl:variable name="refelem" select="local-name($target)"/>
+    <xsl:variable name="role" select="@role"/>
+    <xsl:call-template name="check.id.unique">
+      <xsl:with-param name="linkend" select="$linkend"/>
+    </xsl:call-template>
+    <xsl:call-template name="anchor"/>
+    <xsl:choose>
+
+      <!-- Dead links -->
+      <xsl:when test="count($target) = 0">
+        <b>
+          <xsl:value-of select="@linkend"/>
+        </b>
+        <tt>
+          <xsl:text> (in the full book)</xsl:text>
+        </tt>
+      </xsl:when>
+      <!-- -->
+
+      <xsl:when test="$target/@xreflabel">
+        <a>
+          <xsl:attribute name="href">
+            <xsl:call-template name="href.target">
+              <xsl:with-param name="object" select="$target"/>
+            </xsl:call-template>
+          </xsl:attribute>
+          <xsl:call-template name="xref.xreflabel">
+            <xsl:with-param name="target" select="$target"/>
+          </xsl:call-template>
+        </a>
+      </xsl:when>
+      <xsl:otherwise>
+        <xsl:variable name="href">
+          <xsl:call-template name="href.target">
+            <xsl:with-param name="object" select="$target"/>
+          </xsl:call-template>
+        </xsl:variable>
+        <xsl:apply-templates select="$target" mode="xref-to-prefix"/>
+        <a href="{$href}">
+          <xsl:if test="$target/title or $target/*/title">
+            <xsl:attribute name="title">
+              <xsl:apply-templates select="$target" mode="xref-title"/>
+            </xsl:attribute>
+          </xsl:if>
+          <xsl:apply-templates select="$target" mode="xref-to">
+            <xsl:with-param name="referrer" select="."/>
+            <xsl:with-param name="role" select="$role"/>
+            <xsl:with-param name="xrefstyle">
+              <xsl:value-of select="@xrefstyle"/>
+            </xsl:with-param>
+          </xsl:apply-templates>
+        </a>
+        <xsl:apply-templates select="$target" mode="xref-to-suffix"/>
+      </xsl:otherwise>
+    </xsl:choose>
+  </xsl:template>
+
+</xsl:stylesheet>

BLFS/libs/constants.inc

@@ -2,6 +2,7 @@
 #
 # common constants
 #
+# $Id$
 #####
 
 

BLFS/libs/dependencies.xsl

@@ -0,0 +1,47 @@
+<?xml version="1.0"?>
+
+<!-- $Id$ -->
+
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+    version="1.0">
+
+  <xsl:output method="text"/>
+
+  <xsl:param name="dependencies" select="2"/>
+
+  <xsl:template match="/">
+    <xsl:apply-templates select="//para[@role='optional']"/>
+    <xsl:apply-templates select="//para[@role='recommended']"/>
+    <xsl:apply-templates select="//para[@role='required']"/>
+  </xsl:template>
+
+  <xsl:template match="//text()"/>
+
+  <xsl:template match="para[@role='required']">
+    <xsl:apply-templates select="xref">
+      <xsl:sort select="position()" data-type="number" order="descending"/>
+    </xsl:apply-templates>
+  </xsl:template>
+
+  <xsl:template match="para[@role='recommended']">
+    <xsl:if test="$dependencies != '1'">
+      <xsl:apply-templates select="xref">
+        <xsl:sort select="position()" data-type="number" order="descending"/>
+      </xsl:apply-templates>
+    </xsl:if>
+  </xsl:template>
+
+  <xsl:template match="para[@role='optional']">
+    <xsl:if test="$dependencies = '3'">
+      <xsl:apply-templates select="xref">
+        <xsl:sort select="position()" data-type="number" order="descending"/>
+      </xsl:apply-templates>
+    </xsl:if>
+  </xsl:template>
+
+  <xsl:template match="xref">
+    <xsl:value-of select="@linkend"/>
+    <xsl:text>&#xA;</xsl:text>
+  </xsl:template>
+
+</xsl:stylesheet>

BLFS/libs/func_packages

@@ -0,0 +1,231 @@
+#!/bin/bash
+#
+# $Id$
+#
+set -e
+
+#-----------------------#
+get_pkg_ver() {         # Find package version for a given package ID
+#-----------------------#
+  local pkg_id=$1
+
+  case ${pkg_id} in
+                  # ALSA packages version
+            alsa* ) pkg_id=alsa ;;
+
+                  # KDE packages version
+          kdevelop ) : ;;
+        kde*config ) : ;;
+              kde* ) pkg_id=kde ;;
+
+                  # Xorg7 packages version
+      xorg7-server ) pkg_id=xorg-server ;;
+            xterm2 ) pkg_id=xterm ;;
+            xorg7* ) pkg_id=xorg7 ;;
+
+                   # Others (ID value don't match entity name)
+    wireless_tools ) pkg_id=wireless-tools ;;
+        bind-utils ) pkg_id=bind ;;
+         html-tidy ) pkg_id=tidy ;;
+          reiserfs ) pkg_id=reiser ;;
+               xfs ) pkg_id=xfsprogs ;;
+  esac
+
+  xmllint --noent ./${BLFS_XML}/book/bookinfo.xml 2>/dev/null | \
+  grep -i " ${pkg_id}-version " | cut -d "\"" -f2 | sed "s/ /_/g"
+
+}
+
+#-----------------------#
+get_installed_ver() {   # Find installed package version for a given package ID
+#-----------------------#
+  local pkg_id=$1
+
+
+  case ${pkg_id} in
+    html-tidy )
+      find $TRACKING_DIR -name "${pkg_id}-cvs_[[:digit:]]*" | sed "s/.*${pkg_id}-//"
+      ;;
+    cdparanoia )
+      find $TRACKING_DIR -name "${pkg_id}-III-[[:digit:]]*" | sed "s/.*${pkg_id}-//"
+      ;;
+    ffmpeg )
+      find $TRACKING_DIR -name "${pkg_id}-svn_[[:digit:]]*" | sed "s/.*${pkg_id}-//"
+      ;;
+    psutils )
+      find $TRACKING_DIR -name "${pkg_id}-p[[:digit:]]*" | sed "s/.*${pkg_id}-//"
+      ;;
+    * )
+      find $TRACKING_DIR -name "${pkg_id}-[[:digit:]]*" | sed "s/.*${pkg_id}-//" | sed "s/ /_/g"
+      ;;
+  esac
+
+}
+
+#-----------------------#
+generate_packages()  {  # Master packages file
+#-----------------------#
+  local pkg_id file pkg_ver
+  local ALSA_VER GNOME_VER GNOME_MINOR_VER KDE_VER KDE_KOFFICE_VER XORG7_VER
+
+  > packages.tmp
+
+  # Extract Id and path for sect1 files
+  for file in `find $BLFS_XML -name "*.xml"` ; do
+    pkg_id=$(grep "sect1 id" $file | sed -e 's/<sect1 id="//;s/".*//')
+    case ${pkg_id} in
+      dbus-bindings | \
+      perl-modules | \
+      python-modules ) pkg_ver=0.no_version ;;
+                   * ) pkg_ver=$(get_pkg_ver $pkg_id) ;;
+    esac
+    installed_ver=$(get_installed_ver $pkg_id)
+    [[ ! -z "$pkg_id" ]] && echo -e "$pkg_id\t$file\t$pkg_ver\t$installed_ver" >> packages.tmp
+  done
+
+  # IDs clean-up (unuseful pages or commented-out packages, could be more)
+  sed -i '/template/d;/ntroduction/d;/preface/d;/alsa.xml/d;/xorg.xml/d' packages.tmp
+  sed -i '/obsolete/d;/ispell\t/d;/postlfs-/d;/-client.xml/d;/xorg7.xml/d' packages.tmp
+  sed -i '/courier.xml/d;/-other\t/d;/others-/d;/other-/d;/^ash\t/d' packages.tmp
+  sed -i '/fw-firewall\t/d;/gcc2\t/d;/cvsserver\t/d;/svnserver\t/d' packages.tmp
+  sed -i '/fam\t/d;/libungif\t/d;/ncpfs\t/d;/slrn\t/d;/konq\t/d;/arts\t/d' packages.tmp
+  sed -i '/gst-plugins\t/d;/gimp-print\t/d;/openquicktime\t/d;/compressdoc\t/d' packages.tmp
+  sed -i '/errata\t/d;/foreword\t/d;/organization\t/d;/whoread\t/d' packages.tmp
+
+  # Meta-packages version
+  ALSA_VER=$(get_pkg_ver alsa)
+  GNOME_VER=$(get_pkg_ver gnome)
+  GNOME_MINOR_VER=$(get_pkg_ver gnome-minor)
+  KDE_VER=$(get_pkg_ver kde)
+  KDE_INST_VER=$(get_installed_ver kde)
+  KDE_KOFFICE_VER=$(get_pkg_ver koffice)
+  XORG7_VER=$(get_pkg_ver xorg7)
+
+  # Meta-packages installed version
+  ALSA_INST_VER=$(get_installed_ver alsa)
+  GNOME_CORE_INST_VER=$(get_installed_ver gnome-core)
+  GNOME_FULL_INST_VER=$(get_installed_ver gnome-full)
+  KDE_CORE_INST_VER=$(get_installed_ver kde-core)
+  KDE_FULL_INST_VER=$(get_installed_ver kde-full)
+  KDE_KOFFICE_INST_VER=$(get_installed_ver kde-koffice)
+  XORG7_INST_VER=$(get_installed_ver xorg7)
+
+  # Add header with meta-packages pseudo Id
+{
+  cat << EOF
+alsa	$BLFS_XML	$ALSA_VER	$ALSA_INST_VER
+gnome-core	$BLFS_XML	$GNOME_VER$GNOME_MINOR_VER	$GNOME_CORE_INST_VER
+gnome-full	$BLFS_XML	$GNOME_VER$GNOME_MINOR_VER	$GNOME_FULL_INST_VER
+kde-core	$BLFS_XML	$KDE_VER	$KDE_CORE_INST_VER
+kde-full	$BLFS_XML	$KDE_VER	$KDE_FULL_INST_VER
+kde-koffice	$BLFS_XML	$KDE_KOFFICE_VER	$KDE_KOFFICE_INST_VER
+xorg7	$BLFS_XML	$XORG7_VER	$XORG7_INST_VER
+EOF
+} >> packages.tmp
+
+  # Dump packages list
+  sort packages.tmp -b --key=2 --field-separator=/ --output=packages
+
+  # Clean up
+  rm packages.tmp
+}
+
+# Pre-made *.dep files for meta-packages
+
+#--------------------------#
+generate_gnome_core()  {   # GNOME core
+#--------------------------#
+  local line base_xml package
+
+  > gnome-core.dep.tmp
+
+  for line in `grep "xi:include" $BLFS_XML/gnome/core/core.xml` ; do
+    base_xml=`echo $line | sed 's/^.*href="//;s/".*//'`
+    package=`grep "gnome/core/$base_xml" packages | cut -f1`
+    [[ -n "$package" ]] && echo $package >> gnome-core.dep.tmp
+  done
+
+  # Replace dummy packages with the proper ones
+  sed -i 's/GNOME-//g' gnome-core.dep.tmp
+
+  tac gnome-core.dep.tmp > libs/gnome-core.dep
+  rm gnome-core.dep.tmp
+}
+
+#--------------------------#
+generate_gnome_full()  {   # GNOME full
+#--------------------------#
+  local line base_xml package
+
+  echo "gnome-core" > gnome-full.dep.tmp
+
+  for line in `grep "xi:include" $BLFS_XML/gnome/add/add.xml` ; do
+    base_xml=`echo $line | sed 's/^.*href="//;s/".*//'`
+    package=`grep "gnome/add/$base_xml" packages | cut -f1`
+    [[ -n "$package" ]] && echo $package >> gnome-full.dep.tmp
+  done
+
+  tac gnome-full.dep.tmp > libs/gnome-full.dep
+  rm gnome-full.dep.tmp
+}
+
+#--------------------------#
+generate_kde_core()  {     # KDE core
+#--------------------------#
+  local line base_xml package
+
+  > kde-core.dep.tmp
+
+  for line in `grep "xi:include" $BLFS_XML/kde/core/core.xml` ; do
+    base_xml=`echo $line | sed 's/^.*href="//;s/".*//'`
+    package=`grep "kde/core/$base_xml" packages | cut -f1`
+    [[ -n "$package" ]] && echo $package >> kde-core.dep.tmp
+  done
+
+  tac kde-core.dep.tmp > libs/kde-core.dep
+  rm kde-core.dep.tmp
+}
+
+#--------------------------#
+generate_kde_full()  {     # KDE full
+#--------------------------#
+  local line base_xml package
+
+  echo "kde-core" > kde-full.dep.tmp
+
+  for line in `grep "xi:include" $BLFS_XML/kde/add/add.xml` ; do
+    base_xml=`echo $line | sed 's/^.*href="//;s/".*//'`
+    package=`grep "kde/add/$base_xml" packages | cut -f1`
+    [[ -n "$package" ]] && echo $package >> kde-full.dep.tmp
+  done
+
+  for line in `grep "xi:include" $BLFS_XML/kde/devel/devel.xml` ; do
+    base_xml=`echo $line | sed 's/^.*href="//;s/".*//'`
+    package=`grep "kde/devel/$base_xml" packages | cut -f1`
+    [[ -n "$package" ]] && echo $package >> kde-full.dep.tmp
+  done
+
+  tac kde-full.dep.tmp > libs/kde-full.dep
+  rm kde-full.dep.tmp
+}
+
+#--------------------------#
+generate_kde_koffice()  {  # KDE full + Koffice
+#--------------------------#
+  echo -e "koffice\nkde-full\nkde-core" > libs/kde-koffice.dep
+}
+
+#--------------------------#
+generate_alsa()  {         # ALSA packages
+#--------------------------#
+  echo -e "alsa-oss\nalsa-firmware\nalsa-tools\nalsa-utils\n\
+alsa-plugins\nalsa-lib" > libs/alsa.dep
+}
+
+#--------------------------#
+generate_xorg7()  {        # Xorg7 packages
+#--------------------------#
+  echo -e "x-config\nx-setup\nrman\nxterm2\nxorg7-driver\nxorg7-server\nluit\n\
+xkeyboard-config\nxorg7-font\nxorg7-data\nxorg7-app\nmesalib\nlibdrm\nxbitmaps\n\
+xorg7-lib\nlibxcb\nxcb-proto\nlibXdmcp\nlibXau\nxorg7-util\nxorg7-proto" > libs/xorg7.dep
+}

BLFS/libs/func_parser

@@ -0,0 +1,151 @@
+#!/bin/bash
+#####
+#
+# Parse the XML documents to create a 'package' book
+#
+# $Id$
+#####
+
+
+#----------------------------#
+generate_TARGET_xml()  {     #
+#----------------------------#
+: <<inline_doc
+    function:   Generate the XML document for the TARGET package
+    input vars: nothing
+    externals:  vars: TARGET
+    modifies:   nothing
+    returns:    nothing
+    output:     file: $TARGET-index.xml
+    on error:   nothing
+    on success: nothing
+inline_doc
+
+  local
+  echo -en "\n\tGenerating $TARGET-index.xml ..."
+
+  #---------------------
+  # Header to $TARGET-index.xml
+{
+cat << EOF
+<?xml version="1.0" encoding="ISO-8859-1"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
+  "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" >
+
+<book>
+
+  <xi:include xmlns:xi="http://www.w3.org/2003/XInclude" href="../$BLFS_XML/book/bookinfo.xml"/>
+
+  <preface>
+    <?dbhtml filename="preface.html" dir="preface"?>
+
+    <title>Preface</title>
+
+    <xi:include xmlns:xi="http://www.w3.org/2003/XInclude" href="../$BLFS_XML/introduction/important/locale-issues.xml"/>
+    <xi:include xmlns:xi="http://www.w3.org/2003/XInclude" href="../$BLFS_XML/introduction/important/bootscripts.xml"/>
+
+  </preface>
+
+  <chapter>
+    <?dbhtml filename="chapter.html" dir="installing"?>
+
+    <title>Installing $TARGET in Dependencies Build Order</title>
+
+EOF
+} > $TARGET-index.xml
+
+  #---------------------
+  # Dump $TARGET-index.xml.tmp in reverse order.
+  tac $TARGET-index.xml.tmp >> $TARGET-index.xml
+  rm $TARGET-index.xml.tmp
+
+  #---------------------
+  # Footer of $TARGET-index.xml
+{
+cat << EOF
+
+  </chapter>
+
+  <xi:include xmlns:xi="http://www.w3.org/2003/XInclude" href="../$BLFS_XML/appendices/creat-comm.xml"/>
+  <xi:include xmlns:xi="http://www.w3.org/2003/XInclude" href="../$BLFS_XML/appendices/ac-free-lic.xml"/>
+
+  <index/>
+
+</book>
+
+EOF
+} >> $TARGET-index.xml
+
+  echo "done"
+}
+
+
+#-------------------------#
+generate_target_book() {  #
+#-------------------------#
+: <<inline_doc
+    function:   Create an HTML document of the requested TARGET.
+    input vars: nothing
+    externals:  vars: TARGET
+                      BLFS_XML
+                      MAIL_SERVER
+                      X11
+    modifies:   nothing
+    returns:    nothing
+    output:     file: NUMEROUS FILES
+    on error:   nothing
+    on success: nothing
+inline_doc
+
+  local filename # output filename
+  echo -en  "\n\tGenerating <$TARGET> HTML book from <$BLFS_XML> xml files ..."
+  xsltproc --xinclude --nonet \
+           --stringparam mail_server $MAIL_SERVER \
+           --stringparam xwindow $X11 \
+           --stringparam base.dir HTML/ \
+           ../libs/book.xsl \
+           $TARGET-index.xml > xsltproc.log 2>&1
+  mkdir HTML/{stylesheets,images}
+  cp ../$BLFS_XML/stylesheets/lfs-xsl/*.css HTML/stylesheets
+  cp ../$BLFS_XML/images/*.png HTML/images
+  cd HTML
+  sed -i -e "s@../stylesheets@stylesheets@g" *.html
+  sed -i -e "s@../images@images@g" *.html
+  for filename in `find . -name "*.html"` ; do
+    tidy -config ../../$BLFS_XML/tidy.conf $filename || true
+    sh ../../$BLFS_XML/obfuscate.sh $filename
+    sed -i -e "s@text/html@application/xhtml+xml@g" $filename
+  done
+  cd ..
+  echo "done"
+}
+
+
+#-------------------------#
+create_build_scripts() {  #
+#-------------------------#
+: <<inline_doc
+    function:   Create shell scripts of the requested TARGET.
+    input vars: $1 use sudo n/y
+    externals:  TARGET
+    modifies:   nothing
+    returns:    nothing
+    output:     file: NUMEROUS FILES
+    on error:   nothing
+    on success: nothing
+inline_doc
+
+  # Log separator
+  echo -e "\n\tScripts generation depuration and errors:\n" >> xsltproc.log
+
+  echo -en "\n\tGenerating the build scripts ..."
+  xsltproc --xinclude --nonet \
+           --stringparam sudo $SUDO \
+           -o ./scripts/ ../libs/scripts.xsl \
+           $TARGET-index.xml >> xsltproc.log 2>&1
+    # Make the scripts executable.
+  chmod -R +x scripts
+  cd ..
+  echo -e "done\n"
+
+}

BLFS/libs/scripts.xsl

@@ -0,0 +1,496 @@
+<?xml version="1.0"?>
+
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+    xmlns:exsl="http://exslt.org/common"
+    extension-element-prefixes="exsl"
+    version="1.0">
+
+<!-- $Id$ -->
+
+<!-- XSLT stylesheet to create shell scripts from "linear build" BLFS books. -->
+
+  <!-- Build as user (y) or as root (n)? -->
+  <xsl:param name="sudo" select="y"/>
+
+  <xsl:template match="/">
+    <xsl:apply-templates select="//sect1"/>
+  </xsl:template>
+
+<!--=================== Master chunks code ======================-->
+
+  <xsl:template match="sect1">
+    <xsl:if test="(count(descendant::screen/userinput) &gt; 0 and
+                  count(descendant::screen/userinput) &gt;
+                  count(descendant::screen[@role='nodump'])) and
+                  @id != 'locale-issues' and @id != 'xorg7' and
+                  @id != 'x-setup'">
+
+        <!-- The file names -->
+      <xsl:variable name="filename" select="@id"/>
+
+        <!-- Package name (use "Download FTP" by default. If empty, use "Download HTTP" -->
+      <xsl:variable name="package">
+        <xsl:choose>
+          <xsl:when
+            test="string-length(sect2[@role='package']/itemizedlist/listitem[2]/para/ulink/@url)
+            &gt; '10'">
+            <xsl:call-template name="package_name">
+              <xsl:with-param name="url"
+                select="sect2[@role='package']/itemizedlist/listitem[2]/para/ulink/@url"/>
+            </xsl:call-template>
+          </xsl:when>
+          <xsl:otherwise>
+            <xsl:call-template name="package_name">
+              <xsl:with-param name="url"
+                select="sect2[@role='package']/itemizedlist/listitem[1]/para/ulink/@url"/>
+            </xsl:call-template>
+          </xsl:otherwise>
+        </xsl:choose>
+      </xsl:variable>
+
+        <!-- FTP dir name -->
+      <xsl:variable name="ftpdir">
+        <xsl:call-template name="ftp_dir">
+          <xsl:with-param name="package" select="$package"/>
+        </xsl:call-template>
+      </xsl:variable>
+
+        <!-- The build order -->
+      <xsl:variable name="position" select="position()"/>
+      <xsl:variable name="order">
+        <xsl:choose>
+          <xsl:when test="string-length($position) = 1">
+            <xsl:text>00</xsl:text>
+            <xsl:value-of select="$position"/>
+          </xsl:when>
+          <xsl:when test="string-length($position) = 2">
+            <xsl:text>0</xsl:text>
+            <xsl:value-of select="$position"/>
+          </xsl:when>
+          <xsl:otherwise>
+            <xsl:value-of select="$position"/>
+          </xsl:otherwise>
+        </xsl:choose>
+      </xsl:variable>
+
+      <!-- Depuration code -->
+      <xsl:message>
+        <xsl:text>SCRIPT is </xsl:text>
+        <xsl:value-of select="concat($order,'-',$filename)"/>
+        <xsl:text>&#xA;   PACKAGE is </xsl:text>
+        <xsl:value-of select="$package"/>
+        <xsl:text>&#xA;    FTPDIR is </xsl:text>
+        <xsl:value-of select="$ftpdir"/>
+        <xsl:text>&#xA;&#xA;</xsl:text>
+      </xsl:message>
+
+        <!-- Creating the scripts -->
+      <exsl:document href="{$order}-z-{$filename}" method="text">
+        <xsl:text>#!/bin/bash&#xA;set -e&#xA;&#xA;</xsl:text>
+        <xsl:choose>
+          <!-- Package page -->
+          <xsl:when test="sect2[@role='package'] and not(@id = 'xorg7-app' or
+                          @id = 'xorg7-data' or @id = 'xorg7-driver' or
+                          @id = 'xorg7-font' or @id = 'xorg7-lib' or
+                          @id = 'xorg7-proto' or @id = 'xorg7-util')">
+            <!-- Variables -->
+            <xsl:text>SRC_ARCHIVE=$SRC_ARCHIVE&#xA;</xsl:text>
+            <xsl:text>FTP_SERVER=$FTP_SERVER&#xA;&#xA;PACKAGE=</xsl:text>
+            <xsl:value-of select="$package"/>
+            <xsl:text>&#xA;PKG_DIR=</xsl:text>
+            <xsl:value-of select="$ftpdir"/>
+            <xsl:text>&#xA;SRC_DIR=$SRC_DIR&#xA;&#xA;</xsl:text>
+            <!-- Download code and build commands -->
+            <xsl:apply-templates select="sect2">
+              <xsl:with-param name="package" select="$package"/>
+              <xsl:with-param name="ftpdir" select="$ftpdir"/>
+            </xsl:apply-templates>
+            <!-- Clean-up -->
+            <xsl:if test="not(@id='mesalib')">
+              <xsl:text>cd $SRC_DIR/$PKG_DIR&#xA;</xsl:text>
+              <xsl:text>rm -rf $UNPACKDIR unpacked&#xA;&#xA;</xsl:text>
+            </xsl:if>
+            <xsl:if test="@id='xorg7-server'">
+              <xsl:text>cd $SRC_DIR/MesaLib
+UNPACKDIR=`head -n1 unpacked | sed 's@^./@@;s@/.*@@'`
+rm -rf $UNPACKDIR unpacked&#xA;&#xA;</xsl:text>
+            </xsl:if>
+          </xsl:when>
+          <!-- Xorg7 pseudo-packages -->
+          <xsl:when test="contains(@id,'xorg7') and not(@id = 'xorg7-server')">
+            <xsl:text>SRC_DIR=$SRC_DIR
+
+cd $SRC_DIR
+mkdir -p xc
+cd xc&#xA;</xsl:text>
+            <xsl:apply-templates select="sect2" mode="xorg7"/>
+          </xsl:when>
+          <!-- Non-package page -->
+          <xsl:otherwise>
+            <xsl:apply-templates select=".//screen"/>
+          </xsl:otherwise>
+        </xsl:choose>
+        <xsl:text>exit</xsl:text>
+      </exsl:document>
+
+    </xsl:if>
+  </xsl:template>
+
+<!--======================= Sub-sections code =======================-->
+
+  <xsl:template match="sect2">
+    <xsl:param name="package" select="foo"/>
+    <xsl:param name="ftpdir" select="foo"/>
+    <xsl:choose>
+      <xsl:when test="@role = 'package'">
+        <xsl:text>mkdir -p $SRC_DIR/$PKG_DIR&#xA;</xsl:text>
+        <xsl:text>cd $SRC_DIR/$PKG_DIR&#xA;</xsl:text>
+        <xsl:apply-templates select="itemizedlist/listitem/para">
+          <xsl:with-param name="package" select="$package"/>
+          <xsl:with-param name="ftpdir" select="$ftpdir"/>
+        </xsl:apply-templates>
+        <xsl:text>&#xA;</xsl:text>
+      </xsl:when>
+      <xsl:when test="@role = 'installation'">
+        <xsl:text>
+if [[ -e unpacked ]] ; then
+  UNPACKDIR=`head -n1 unpacked | sed 's@^./@@;s@/.*@@'`
+  [[ -n $UNPACKDIR ]] &amp;&amp; [[ -d $UNPACKDIR ]] &amp;&amp; rm -rf $UNPACKDIR
+fi
+tar -xvf $PACKAGE > unpacked
+UNPACKDIR=`head -n1 unpacked | sed 's@^./@@;s@/.*@@'`
+cd $UNPACKDIR&#xA;</xsl:text>
+        <xsl:apply-templates select=".//screen | .//para/command"/>
+        <xsl:if test="$sudo = 'y'">
+          <xsl:text>sudo /sbin/</xsl:text>
+        </xsl:if>
+        <xsl:text>ldconfig&#xA;&#xA;</xsl:text>
+      </xsl:when>
+      <xsl:when test="@role = 'configuration'">
+        <xsl:apply-templates select=".//screen"/>
+        <xsl:text>&#xA;</xsl:text>
+      </xsl:when>
+    </xsl:choose>
+  </xsl:template>
+
+  <xsl:template match="sect2" mode="xorg7">
+    <xsl:choose>
+      <xsl:when test="@role = 'package'">
+        <xsl:apply-templates select="itemizedlist/listitem/para" mode="xorg7"/>
+      </xsl:when>
+      <xsl:when test="not(@role)">
+        <xsl:text>SRC_ARCHIVE=$SRC_ARCHIVE
+FTP_SERVER=$FTP_SERVER&#xA;</xsl:text>
+        <xsl:apply-templates select=".//screen" mode="sect-ver"/>
+        <xsl:text>mkdir -p ${section}&#xA;cd ${section}&#xA;</xsl:text>
+        <xsl:apply-templates select="../sect2[@role='package']/itemizedlist/listitem/para" mode="xorg7-patch"/>
+        <xsl:text>for line in $(grep -v '^#' ../${sect_ver}.wget) ; do
+  if [[ ! -f ${line} ]] ; then
+    if [[ -f $SRC_ARCHIVE/Xorg/${section}/${line} ]] ; then
+      cp $SRC_ARCHIVE/Xorg/${section}/${line} ${line}
+    elif [[ -f $SRC_ARCHIVE/Xorg/${line} ]] ; then
+      cp $SRC_ARCHIVE/Xorg/${line} ${line}
+    elif [[ -f $SRC_ARCHIVE/${section}/${line} ]] ; then
+      cp $SRC_ARCHIVE/${section}/${line} ${line}
+    elif [[ -f $SRC_ARCHIVE/${line} ]] ; then
+      cp $SRC_ARCHIVE/${line} ${line}
+    else
+      wget ${FTP_SERVER}conglomeration/Xorg/${line} || \
+      wget http://xorg.freedesktop.org/releases/individual/${section}/${line}
+    fi
+  fi
+done
+md5sum -c ../${sect_ver}.md5
+cp ../${sect_ver}.wget ../${sect_ver}.wget.orig
+cp ../${sect_ver}.md5 ../${sect_ver}.md5.orig&#xA;</xsl:text>
+      </xsl:when>
+      <xsl:when test="@role = 'installation'">
+        <xsl:text>for package in $(grep -v '^#' ../${sect_ver}.wget) ; do
+  packagedir=$(echo $package | sed 's/.tar.bz2//')
+  tar -xf ${package}
+  cd ${packagedir}&#xA;</xsl:text>
+        <xsl:apply-templates select=".//screen | .//para/command"/>
+        <xsl:text>  cd ..
+  rm -rf ${packagedir}
+  sed -i "/${package}/d" ../${sect_ver}.wget
+  sed -i "/${package}/d" ../${sect_ver}.md5
+done
+mv ../${sect_ver}.wget.orig ../${sect_ver}.wget
+mv ../${sect_ver}.md5.orig ../${sect_ver}.md5&#xA;</xsl:text>
+        <xsl:if test="$sudo = 'y'">
+          <xsl:text>sudo /sbin/</xsl:text>
+        </xsl:if>
+        <xsl:text>ldconfig&#xA;&#xA;</xsl:text>
+      </xsl:when>
+      <xsl:when test="@role = 'configuration'">
+        <xsl:apply-templates select=".//screen"/>
+        <xsl:text>&#xA;</xsl:text>
+      </xsl:when>
+    </xsl:choose>
+  </xsl:template>
+
+<!--==================== Download code =======================-->
+
+  <xsl:template name="package_name">
+    <xsl:param name="url" select="foo"/>
+    <xsl:param name="sub-url" select="substring-after($url,'/')"/>
+    <xsl:choose>
+      <xsl:when test="contains($sub-url,'/')">
+        <xsl:call-template name="package_name">
+          <xsl:with-param name="url" select="$sub-url"/>
+        </xsl:call-template>
+      </xsl:when>
+      <xsl:otherwise>
+        <xsl:choose>
+          <xsl:when test="contains($sub-url,'?')">
+            <xsl:value-of select="substring-before($sub-url,'?')"/>
+          </xsl:when>
+          <xsl:when test="contains($sub-url,'.patch')"/>
+          <xsl:otherwise>
+            <xsl:value-of select="$sub-url"/>
+          </xsl:otherwise>
+        </xsl:choose>
+      </xsl:otherwise>
+    </xsl:choose>
+  </xsl:template>
+
+  <xsl:template name="ftp_dir">
+    <xsl:param name="package" select="foo"/>
+    <!-- A lot of hardcoded dir names. Not full revised yet. -->
+    <xsl:choose>
+        <!-- cdparanoia -->
+      <xsl:when test="contains($package, '-III')">
+        <xsl:text>cdparanoia</xsl:text>
+      </xsl:when>
+        <!-- DobBook 3.1 -->
+      <xsl:when test="contains($package, 'docbk31')">
+        <xsl:text>docbk</xsl:text>
+      </xsl:when>
+        <!-- gc -->
+      <xsl:when test="contains($package, 'gc6')">
+        <xsl:text>gc</xsl:text>
+      </xsl:when>
+        <!-- ISO-codes -->
+      <xsl:when test="contains($package, 'iso-codes')">
+        <xsl:text>iso-codes</xsl:text>
+      </xsl:when>
+        <!-- JPEG -->
+      <xsl:when test="contains($package, 'jpegsrc')">
+        <xsl:text>jpeg</xsl:text>
+      </xsl:when>
+        <!-- lynx -->
+      <xsl:when test="contains($package, 'lynx')">
+        <xsl:text>lynx</xsl:text>
+      </xsl:when>
+        <!-- ntp -->
+      <xsl:when test="contains($package, 'ntp')">
+        <xsl:text>ntp</xsl:text>
+      </xsl:when>
+        <!-- OpenLDAP -->
+      <xsl:when test="contains($package, 'openldap')">
+        <xsl:text>openldap</xsl:text>
+      </xsl:when>
+        <!-- Open Office -->
+      <xsl:when test="contains($package, 'OOo')">
+        <xsl:text>OOo</xsl:text>
+      </xsl:when>
+        <!-- pine -->
+      <xsl:when test="contains($package, 'pine')">
+        <xsl:text>pine</xsl:text>
+      </xsl:when>
+        <!-- portmap -->
+      <xsl:when test="contains($package, 'portmap')">
+        <xsl:text>portmap</xsl:text>
+      </xsl:when>
+        <!-- psutils -->
+      <xsl:when test="contains($package, 'psutils')">
+        <xsl:text>psutils</xsl:text>
+      </xsl:when>
+        <!-- qpopper -->
+      <xsl:when test="contains($package, 'qpopper')">
+        <xsl:text>qpopper</xsl:text>
+      </xsl:when>
+        <!-- QT -->
+      <xsl:when test="contains($package, 'qt-x')">
+        <xsl:text>qt-x11-free</xsl:text>
+      </xsl:when>
+        <!-- sendmail -->
+      <xsl:when test="contains($package, 'sendmail')">
+        <xsl:text>sendmail</xsl:text>
+      </xsl:when>
+        <!-- Slib -->
+      <xsl:when test="contains($package, 'slib')">
+        <xsl:text>slib</xsl:text>
+      </xsl:when>
+        <!-- TCL -->
+      <xsl:when test="contains($package, 'tcl')">
+        <xsl:text>tcl</xsl:text>
+      </xsl:when>
+        <!-- tcpwrappers -->
+      <xsl:when test="contains($package, 'tcp_wrappers')">
+        <xsl:text>tcp_wrappers</xsl:text>
+      </xsl:when>
+        <!-- TeTeX -->
+      <xsl:when test="contains($package, 'tetex')">
+        <xsl:text>tetex</xsl:text>
+      </xsl:when>
+        <!-- Tidy -->
+      <xsl:when test="contains($package, 'tidy')">
+        <xsl:text>tidy</xsl:text>
+      </xsl:when>
+        <!-- Tk -->
+      <xsl:when test="contains($package, 'tk8')">
+        <xsl:text>tk</xsl:text>
+      </xsl:when>
+        <!-- unzip -->
+      <xsl:when test="contains($package, 'unzip')">
+        <xsl:text>unzip</xsl:text>
+      </xsl:when>
+        <!-- wireless_tools -->
+      <xsl:when test="contains($package, 'wireless_tools')">
+        <xsl:text>wireless_tools</xsl:text>
+      </xsl:when>
+        <!-- whois -->
+      <xsl:when test="contains($package, 'whois')">
+        <xsl:text>whois</xsl:text>
+      </xsl:when>
+        <!-- XOrg -->
+      <xsl:when test="contains($package, 'X11R6')">
+        <xsl:text>Xorg</xsl:text>
+      </xsl:when>
+        <!-- zip -->
+      <xsl:when test="contains($package, 'zip2')">
+        <xsl:text>zip</xsl:text>
+      </xsl:when>
+        <!-- General rule -->
+      <xsl:otherwise>
+        <xsl:variable name="cut"
+          select="translate(substring-after($package, '-'), '0123456789', '0000000000')"/>
+        <xsl:variable name="package2">
+          <xsl:value-of select="substring-before($package, '-')"/>
+          <xsl:text>-</xsl:text>
+          <xsl:value-of select="$cut"/>
+        </xsl:variable>
+        <xsl:value-of select="substring-before($package2, '-0')"/>
+      </xsl:otherwise>
+    </xsl:choose>
+  </xsl:template>
+
+  <xsl:template match="itemizedlist/listitem/para">
+    <xsl:param name="package" select="foo"/>
+    <xsl:param name="ftpdir" select="foo"/>
+    <xsl:choose>
+      <!-- This depend on all package pages having both "Download HTTP" and "Download FTP" lines -->
+      <xsl:when test="contains(string(),'HTTP')">
+        <xsl:text>if [[ ! -f $PACKAGE ]] ; then&#xA;</xsl:text>
+        <!-- SRC_ARCHIVE may have subdirectories or not -->
+        <xsl:text>  if [[ -f $SRC_ARCHIVE/$PKG_DIR/$PACKAGE ]] ; then&#xA;</xsl:text>
+        <xsl:text>    cp $SRC_ARCHIVE/$PKG_DIR/$PACKAGE $PACKAGE&#xA;</xsl:text>
+        <xsl:text>  elif [[ -f $SRC_ARCHIVE/$PACKAGE ]] ; then&#xA;</xsl:text>
+        <xsl:text>    cp $SRC_ARCHIVE/$PACKAGE $PACKAGE&#xA;  else&#xA;</xsl:text>
+        <!-- The FTP_SERVER mirror -->
+        <xsl:text>    wget ${FTP_SERVER}conglomeration/$PKG_DIR/$PACKAGE</xsl:text>
+        <!-- Upstream HTTP URL -->
+        <xsl:if test="string-length(ulink/@url) &gt; '10'">
+          <xsl:text> || \&#xA;    wget </xsl:text>
+          <xsl:choose>
+            <xsl:when test="contains(ulink/@url,'?')">
+              <xsl:value-of select="substring-before(ulink/@url,'?')"/>
+            </xsl:when>
+            <xsl:otherwise>
+              <xsl:value-of select="ulink/@url"/>
+            </xsl:otherwise>
+          </xsl:choose>
+        </xsl:if>
+      </xsl:when>
+      <xsl:when test="contains(string(),'FTP')">
+        <!-- Upstream FTP URL -->
+        <xsl:if test="string-length(ulink/@url) &gt; '10'">
+          <xsl:text> || \&#xA;    wget </xsl:text>
+          <xsl:value-of select="ulink/@url"/>
+        </xsl:if>
+        <xsl:text>&#xA;  fi&#xA;fi&#xA;</xsl:text>
+      </xsl:when>
+      <xsl:when test="contains(string(),'MD5')">
+        <xsl:text>echo "</xsl:text>
+        <xsl:value-of select="substring-after(string(),'sum: ')"/>
+        <xsl:text>&#x20;&#x20;$PACKAGE" | md5sum -c -&#xA;</xsl:text>
+      </xsl:when>
+      <!-- Patches -->
+      <xsl:when test="contains(string(ulink/@url),'.patch')">
+        <xsl:text>wget </xsl:text>
+        <xsl:value-of select="ulink/@url"/>
+        <xsl:text>&#xA;</xsl:text>
+      </xsl:when>
+    </xsl:choose>
+  </xsl:template>
+
+  <xsl:template match="itemizedlist/listitem/para" mode="xorg7">
+    <xsl:if test="contains(string(ulink/@url),'.md5') or
+                  contains(string(ulink/@url),'.wget')">
+      <xsl:text>wget </xsl:text>
+      <xsl:value-of select="ulink/@url"/>
+      <xsl:text>&#xA;</xsl:text>
+    </xsl:if>
+  </xsl:template>
+
+  <xsl:template match="itemizedlist/listitem/para" mode="xorg7-patch">
+    <xsl:if test="contains(string(ulink/@url),'.patch')">
+      <xsl:text>wget </xsl:text>
+      <xsl:value-of select="ulink/@url"/>
+      <xsl:text>&#xA;</xsl:text>
+    </xsl:if>
+  </xsl:template>
+
+<!--======================== Commands code ==========================-->
+
+  <xsl:template match="screen">
+    <xsl:if test="child::* = userinput and not(@role = 'nodump')">
+      <xsl:if test="@role = 'root' and $sudo = 'y'">
+        <xsl:text>sudo sh -c '</xsl:text>
+      </xsl:if>
+      <xsl:apply-templates select="userinput"/>
+      <xsl:if test="@role = 'root' and $sudo = 'y'">
+        <xsl:text>'</xsl:text>
+      </xsl:if>
+      <xsl:text>&#xA;</xsl:text>
+    </xsl:if>
+  </xsl:template>
+
+  <xsl:template match="screen" mode="sect-ver">
+    <xsl:text>section=</xsl:text>
+    <xsl:value-of select="substring-before(substring-after(string(),'mkdir '),' &amp;')"/>
+    <xsl:text>&#xA;sect_ver=</xsl:text>
+    <xsl:value-of select="substring-before(substring-after(string(),'-c ../'),'.md5')"/>
+    <xsl:text>&#xA;</xsl:text>
+  </xsl:template>
+
+  <xsl:template match="para/command">
+    <xsl:if test="(contains(string(),'test') or
+            contains(string(),'check'))">
+      <xsl:text>#</xsl:text>
+      <xsl:value-of select="substring-before(string(),'make')"/>
+      <xsl:text>make -k</xsl:text>
+      <xsl:value-of select="substring-after(string(),'make')"/>
+      <xsl:text> || true&#xA;</xsl:text>
+    </xsl:if>
+  </xsl:template>
+
+  <xsl:template match="userinput">
+    <xsl:apply-templates/>
+  </xsl:template>
+
+  <xsl:template match="replaceable">
+    <xsl:choose>
+      <xsl:when test="ancestor::sect1[@id='xorg7-server']">
+        <xsl:text>$SRC_DIR/MesaLib</xsl:text>
+      </xsl:when>
+      <xsl:otherwise>
+        <xsl:text>**EDITME</xsl:text>
+        <xsl:apply-templates/>
+        <xsl:text>EDITME**</xsl:text>
+      </xsl:otherwise>
+    </xsl:choose>
+  </xsl:template>
+
+</xsl:stylesheet>

BLFS/packdesc.dtd

@@ -1,23 +0,0 @@
-<!-- Top level element -->
-<!ELEMENT princList (list+)>
-<!-- list corresponds to parts of the book -->
-<!ELEMENT list (name,sublist+)>
-<!ATTLIST list id ID #IMPLIED>
-<!-- sublist corresponds to chapters of the book -->
-<!ELEMENT sublist (name,package*)>
-<!ATTLIST sublist id ID #IMPLIED>
-<!-- information on package -->
-<!ELEMENT package (name,((version,inst-version?,dependency*)|module+))>
-<!ELEMENT name (#PCDATA)>
-<!ELEMENT version (#PCDATA)>
-<!ELEMENT inst-version (#PCDATA)>
-<!-- Modules -->
-<!ELEMENT module (name,version,inst-version?,dependency*)>
-<!-- dependencies -->
-<!ELEMENT dependency (dependency*)>
-<!-- subdependencies of a dependency are defined for example in Perl
-     modules -->
-<!ATTLIST dependency status (required|recommended|optional) "recommended"
-                     build (before|after|first) "before"
-                     name CDATA #REQUIRED
-                     type (ref|link) "ref">

BLFS/update-lfs.sh

@@ -1,148 +0,0 @@
-#!/bin/bash
-
-# Fills the tracking file with versions of LFS packages taken from an
-# SVN repository, at either a given date or a given tag (argument $1).
-#------
-# Argument $1:
-# $1 contains a tag or a date, to indicate which version of the LFS book
-# to use. It may be empty, meaning to use whatever version is presently in
-# lfs-xml.
-#
-# It is recognized as a tag if it begins with x.y, where 'x' is one or more
-# digit(s), the '.' (dot) is mandatory, an 'y' is one or more digits. Anything
-# after y is allowed (for example 7.6-systemd or 8.1-rc1).
-#
-# It is recognized as a date if it is exactly 8 digits. Then it is assumed that
-# the format is YYYYMMDD.
-#
-# Note that there is no check that the tag or the date are valid. Svn errors
-# out if the tag is not valid, and if the date is impossible (that is MM>12
-# or DD>31), but it happily accepts YYYY=3018 (and updates to HEAD).
-#------
-# The tracking file is taken from Makefile in the same directory.
-
-MYDIR=$( cd $(dirname $0); pwd )
-LFS_XML=${MYDIR}/lfs-xml
-
-if [ -z "$1" ]; then # use lfs-xml as is
-    DO_COMMANDS=n
-elif [ "$(echo $1 | sed 's/^[[:digit:]]\+\.[[:digit:]]\+//')" != "$1" ]
-    then # tag
-    DO_COMMANDS=y
-    CURR_SVN=$(cd $LFS_XML; LANG=C svn info | sed -n 's/Relative URL: //p')
-    CURR_REV=$(cd $LFS_XML; LANG=C svn info | sed -n 's/Revision: //p')
-    BEG_COMMAND="(cd $LFS_XML; svn switch ^/tags/$1)"
-    END_COMMAND="(cd $LFS_XML; svn switch $CURR_SVN@$CURR_REV)"
-elif [ "$(echo $1 | sed 's/^[[:digit:]]\{8\}$//')" != "$1" ]; then # date
-    DO_COMMANDS=y
-    CURR_REV=$(cd $LFS_XML; LANG=C svn info | sed -n 's/Revision: //p')
-    BEG_COMMAND="(cd $LFS_XML; svn update -r\\{$1\\})"
-    END_COMMAND="(cd $LFS_XML; svn update -r$CURR_REV)"
-else
-    echo Bad format in $1: must be a x.y[-aaa] tag or a YYYYMMDD date
-    exit 1
-fi
-
-if [ -f $MYDIR/Makefile ]; then
-    TRACKING_DIR=$(sed -n 's/TRACKING_DIR[ ]*=[ ]*//p' $MYDIR/Makefile)
-    TRACKFILE=${TRACKING_DIR}/instpkg.xml
-else
-    echo The directory where $0 resides does not contain a Makefile
-    exit 1
-fi
-
-# We need to know the revision to generate the correct lfs-full...
-if [ ! -r $MYDIR/revision ]; then
-    echo $MYDIR/revision is not available
-    exit 1
-fi
-REVISION=$(cat $MYDIR/revision)
-#Debug
-#echo BEG_COMMAND = $BEG_COMMAND
-#echo Before BEG_COMMAND
-#( cd $LFS_XML; LANG=C svn info )
-#End debug
-
-if [ "$DO_COMMANDS"=y ]; then
-    echo Running: $BEG_COMMAND
-    eval $BEG_COMMAND
-fi
-
-# Update code
-LFS_FULL=/tmp/lfs-full.xml
-echo Creating $LFS_FULL with information from $LFS_XML
-echo "Processing LFS bootscripts..."
-( cd $LFS_XML && bash process-scripts.sh )
-echo "Adjusting LFS for revision $REVISION..."
-xsltproc --nonet --xinclude                          \
-         --stringparam profile.revision $REVISION       \
-         --output /tmp/lfs-prof.xml         \
-        $LFS_XML/stylesheets/lfs-xsl/profile.xsl \
-        $LFS_XML/index.xml
-echo "Validating the LFS book..."
-xmllint --nonet --noent --postvalid \
-        -o $LFS_FULL /tmp/lfs-prof.xml
-rm -f $LFS_XML/appendices/*.script
-( cd $LFS_XML && ./aux-file-data.sh $LFS_FULL )
-
-echo Updating ${TRACKFILE} with information taken from $LFS_FULL
-echo -n "Is it OK? yes/no (no): "
-read ANSWER
-#Debug
-echo You answered $ANSWER
-#End debug
-
-if [ x$ANSWER = "xyes" ] ; then
-    for pack in $(grep '<productname' $LFS_FULL |
-                  sed 's/.*>\([^<]*\)<.*/\1/' |
-                  sort | uniq); do
-        case "x$pack" in
-            xgcc* | *pass[12] | xvim | \
-            xshadow | xPython | xlinux-headers | xdbus | xsystemd )
-	        continue ;;
-        esac
-
-        VERSION=$(grep -A1 ">$pack</product" $LFS_FULL |
-                    head -n2 |
-                    sed -n '2s/.*>\([^<]*\)<.*/\1/p')
-#Debug
-echo $pack: $VERSION
-#End debug
-        xsltproc --stringparam packages $MYDIR/packages.xml \
-                 --stringparam package $pack \
-                 --stringparam version $VERSION \
-                 -o track.tmp \
-                 $MYDIR/xsl/bump.xsl ${TRACKFILE}
-        sed -i "s@PACKDESC@$MYDIR/packdesc.dtd@" track.tmp
-        xmllint --format --postvalid track.tmp > ${TRACKFILE}
-        rm track.tmp
-    done
-    VERSION=$(grep 'echo.*lfs-release' $LFS_FULL |
-              sed 's/.*echo[ ]*\([^ ]*\).*/\1/')
-#Debug
-echo LFS-Release: $VERSION
-#End debug
-    xsltproc --stringparam packages $MYDIR/packages.xml \
-             --stringparam package LFS-Release \
-             --stringparam version $VERSION \
-             -o track.tmp \
-             $MYDIR/xsl/bump.xsl ${TRACKFILE}
-    sed -i "s@PACKDESC@$MYDIR/packdesc.dtd@" track.tmp
-    xmllint --format --postvalid track.tmp > ${TRACKFILE}
-    rm track.tmp
-fi
-#Debug
-#echo After BEG_COMMAND\; before END_COMMAND
-#( cd $LFS_XML; LANG=C svn info )
-#End debug
-
-
-if [ "$DO_COMMANDS"=y ]; then
-    echo Running: $END_COMMAND
-    eval $END_COMMAND
-fi
-
-#Debug
-#echo After END_COMMAND
-#( cd $LFS_XML; LANG=C svn info )
-#End debug

BLFS/update_book.sh

@@ -0,0 +1,108 @@
+#!/bin/bash
+#
+# $Id$
+#
+set -e
+
+declare -r SVN="svn://svn.linuxfromscratch.org"
+
+DOC_MODE=$1  # Action to take, update, get or none
+BLFS_XML=$2  # Book directory
+TREE=$3      # SVN tree for the BLFS book version
+
+[[ -z $BLFS_XML ]] && BLFS_XML=blfs-xml
+[[ -z $DOC_MODE ]] && DOC_MODE=update
+[[ -z $TREE ]] && TREE=trunk/BOOK
+
+TRACKING_DIR=tracking-dir
+
+#---------------------
+# packages module
+source libs/func_packages
+[[ $? > 0 ]] && echo -e "\n\tERROR: func_packages did not load..\n" && exit
+
+#----------------------------#
+BOOK_Source() {              #
+#----------------------------#
+: <<inline_doc
+    function:   Retrieve or upate a copy of the BLFS book
+    input vars: $1 BLFS_XML book sources directory
+                $2 DOC_MODE action get/update
+                $3 TREE     SVN tree when $2=get
+    externals:  none
+    modifies:   $BLFS_XML directory tree
+    returns:    nothing
+    output:
+    on error:   exit
+    on success: text messages
+inline_doc
+
+  case $DOC_MODE in
+    update )
+      if [[ ! -d $BLFS_XML ]] ; then
+        echo -e "\n\t$BLFS_XML is not a directory\n"
+        exit 1
+      fi
+      if [[ ! -f $BLFS_XML/x/x.xml ]] ; then
+        echo -e "\n\tLooks like $BLFS_XML is not a BLFS book sources directory\n"
+        exit 1
+      fi
+
+      if [[ -d $BLFS_XML/.svn ]] ; then
+        echo -e "\n\tUpdating the $BLFS_XML book sources ...\n"
+        pushd $BLFS_XML 1> /dev/null
+          svn up
+        popd 1> /dev/null
+        echo -e "\n\tBook sources updated."
+      else
+        echo -e "\n\tLooks like $BLFS_XML is not a svn working copy."
+        echo -e "\tSkipping BLFS sources update.\n"
+      fi
+      ;;
+
+    get )
+      [[ ! -d $BLFS_XML ]] && mkdir -pv $BLFS_XML
+      svn co $SVN/BLFS/$TREE $BLFS_XML 2>&1
+      ;;
+    * )
+        echo -e "\n\tUnknown option ${DOC_MODE} ignored.\n"
+    ;;
+  esac
+}
+
+[ "${DOC_MODE}" != "none" ] && BOOK_Source
+
+if [ "${DOC_MODE}" = "none" ] ; then
+  echo -en "\n\tGenerating packages database file ..."
+  generate_packages
+  echo "done."
+
+  echo -en "\tGenerating alsa dependencies list ..."
+  generate_alsa
+  echo "done."
+
+  echo -en "\tGenerating gnome-core dependencies list ..."
+  generate_gnome_core
+  echo "done."
+
+  echo -en "\tGenerating gnome-full dependencies list ..."
+  generate_gnome_full
+  echo "done."
+
+  echo -en "\tGenerating kde-core dependencies list ..."
+  generate_kde_core
+  echo "done."
+
+  echo -en "\tGenerating kde-full dependencies list ..."
+  generate_kde_full
+  echo -e "done."
+
+  echo -en "\tGenerating kde-koffice dependencies list ..."
+  generate_kde_koffice
+  echo -e "done."
+
+  echo -en "\tGenerating xorg7 dependencies list ..."
+  generate_xorg7
+  echo "done."
+fi
+

BLFS/xsl/bump.xsl

@@ -1,66 +0,0 @@
-<?xml version="1.0" encoding="ISO-8859-1"?>
-
-<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-                version="1.0">
-
-  <xsl:param name="packages" select="'packages.xml'"/>
-  <xsl:param name="package" select="''"/>
-  <xsl:param name="version" select="'N'"/>
-
-  <xsl:variable name="realpackage">
-    <xsl:choose>
-      <xsl:when test="contains($package, '-pass1')">
-        <xsl:copy-of select="substring-before($package, '-pass1')"/>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:copy-of select="$package"/>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:variable>
-
-  <xsl:variable name="vers">
-    <xsl:choose>
-      <xsl:when test="$version='N'">
-        <xsl:value-of select=
-            "document($packages)//*[self::package or self::module]
-                                   [string(name)=$realpackage]/version"/>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:copy-of select="$version"/>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:variable>
-
-  <xsl:output
-    method="xml"
-    encoding="ISO-8859-1"
-    doctype-system="PACKDESC"/>
-
-  <xsl:template match="/">
-    <sublist>
-      <xsl:copy-of select="./sublist/name"/>
-      <xsl:apply-templates select=".//package"/>
-      <xsl:if test="not(.//package[string(name)=$package])">
-        <package>
-          <name><xsl:copy-of select="$package"/></name>
-          <version><xsl:copy-of select="$vers"/></version>
-        </package>
-      </xsl:if>
-    </sublist>
-  </xsl:template>
-
-  <xsl:template match="package">
-    <xsl:choose>
-      <xsl:when test="string(name)=$package">
-        <package>
-          <name><xsl:copy-of select="$package"/></name>
-          <version><xsl:copy-of select="$vers"/></version>
-        </package>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:copy-of select='.'/>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-
-</xsl:stylesheet>

BLFS/xsl/dependencies.xsl

@@ -1,172 +0,0 @@
-<?xml version="1.0"?>
-
-<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-    version="1.0">
-
-  <xsl:output method="text"/>
-
-  <xsl:param name="MTA" select="'sendmail'"/>
-  <xsl:param name="idofdep" select="'dbus'"/>
-
-  <xsl:key name="depnode"
-           match="package|module"
-           use="name"/>
-
-  <xsl:template match="/">
-    <xsl:apply-templates select="key('depnode',$idofdep)"/>
-  </xsl:template>
-
-  <xsl:template match="package">
-    <xsl:apply-templates select="./dependency"/>
-  </xsl:template>
-
-  <xsl:template match="module">
-    <xsl:apply-templates select="./dependency"/>
-  </xsl:template>
-
-  <xsl:template match="dependency">
-    <xsl:variable name="depname">
-      <xsl:choose>
-        <xsl:when test="@name='x-window-system'">xinit</xsl:when>
-        <xsl:when test="@name='xorg7'">xinit</xsl:when>
-        <xsl:when test="@name='server-mail'">
-          <xsl:value-of select="$MTA"/>
-        </xsl:when>
-        <xsl:otherwise>
-          <xsl:value-of select="@name"/>
-        </xsl:otherwise>
-      </xsl:choose>
-    </xsl:variable>
-<!--
-    <xsl:variable name="install_it">
-      <xsl:choose>
-        <xsl:when test="@type='link'">
-<!- - No way to track versions: install ! - ->
-          1
-        </xsl:when>
-        <xsl:otherwise>
-          <xsl:call-template name="compare-versions">
-            <xsl:with-param name="version" select="key('depnode',$depname)/version"/>
-            <xsl:with-param name="inst-version" select="key('depnode',$depname)/inst-version"/>
-          </xsl:call-template>
-        </xsl:otherwise>
-      </xsl:choose>
-    </xsl:variable>
--->
-    <xsl:apply-templates select="dependency"/>
-<!--
-    <xsl:if test="number($install_it)">
--->
-      <xsl:choose>
-        <xsl:when test="@type='link'">
-          <xsl:text>4</xsl:text>
-        </xsl:when>
-        <xsl:when test="@status='required'">
-          <xsl:text>1</xsl:text>
-        </xsl:when>
-        <xsl:when test="@status='recommended'">
-          <xsl:text>2</xsl:text>
-        </xsl:when>
-        <xsl:otherwise>
-          <xsl:text>3</xsl:text>
-        </xsl:otherwise>
-      </xsl:choose>
-      <xsl:text> </xsl:text>
-      <xsl:choose>
-        <xsl:when test="@build='first'">
-          <xsl:text>f</xsl:text>
-        </xsl:when>
-        <xsl:when test="@build='before'">
-          <xsl:text>b</xsl:text>
-        </xsl:when>
-        <xsl:otherwise>
-          <xsl:text>a</xsl:text>
-        </xsl:otherwise>
-      </xsl:choose>
-      <xsl:text> </xsl:text>
-      <xsl:value-of select="$depname"/>
-      <xsl:text>&#xA;</xsl:text>
-<!--
-    </xsl:if>
--->
-  </xsl:template>
-
-<!-- lexicographic Comparison of strings. There is no way to directly
-     compare strings in XPath. So find the position of the character
-     in the following string. On the other hand, for numeric form style
-     xx.yy.zz, we have to compare xx and x'x', which is not always
-     lexicographic: think of 2.2 vs 2.10 -->
-
-  <xsl:variable name="char-table" select="' abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ'"/>
-  <xsl:variable name= "dot-table" select="'.....................................................'"/>
-
-  <xsl:template name="compare-versions">
-<!-- returns non-zero if version is greater than inst-version -->
-    <xsl:param name="version"/>
-    <xsl:param name="inst-version"/>
-<!-- first make all separators (-_) into dots -->
-    <xsl:variable name="mod-ver" select="translate($version,'-_','..')"/>
-    <xsl:variable name="mod-inst-ver" select="translate($inst-version,'-_','..')"/>
-<!-- Then let us find the position of the first chars in char-table (0 if numeric or dot) -->
-    <xsl:variable name="pos-ver" select="string-length(substring-before($char-table,substring($version,1,1)))"/>
-    <xsl:variable name="pos-inst-ver" select="string-length(substring-before($char-table,substring($inst-version,1,1)))"/>
-    <xsl:choose>
-      <xsl:when test="string-length($inst-version)=0">
-        <xsl:value-of select="string-length($version)"/>
-      </xsl:when>
-      <xsl:when test="string-length($version)=0">
-        0
-      </xsl:when>
-      <xsl:when test="$pos-ver != 0">
-        <xsl:choose>
-          <xsl:when test="$pos-ver = $pos-inst-ver">
-            <xsl:call-template name="compare-versions">
-              <xsl:with-param name="version" select="substring($version,2)"/>
-              <xsl:with-param name="inst-version" select="substring($inst-version,2)"/>
-            </xsl:call-template>
-          </xsl:when>
-          <xsl:otherwise>
-            <xsl:copy-of select="number($pos-ver &gt; $pos-inst-ver)"/>
-          </xsl:otherwise>
-        </xsl:choose>
-      </xsl:when>
-      <xsl:when test="substring($mod-ver,1,1)='.'">
-        <xsl:choose>
-          <xsl:when test="substring($mod-inst-ver,1,1)='.'">
-            <xsl:call-template name="compare-versions">
-              <xsl:with-param name="version" select="substring($version,2)"/>
-              <xsl:with-param name="inst-version" select="substring($inst-version,2)"/>
-            </xsl:call-template>
-          </xsl:when>
-          <xsl:otherwise>
-            0
-          </xsl:otherwise>
-        </xsl:choose>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:choose>
-          <xsl:when test="$pos-inst-ver &gt; 0 or substring($mod-inst-ver,1,1)='.'">
-<!-- do not know what to do: do not install -->
-           0
-          </xsl:when>
-          <xsl:otherwise>
-            <xsl:variable name="tok" select="substring-before(concat(translate($mod-ver,$char-table,$dot-table),'.'),'.')"/>
-            <xsl:variable name="inst-tok" select="substring-before(concat(translate($mod-inst-ver,$char-table,$dot-table),'.'),'.')"/>
-             <xsl:choose>
-               <xsl:when test="number($tok)=number($inst-tok)">
-                 <xsl:call-template name="compare-versions">
-                   <xsl:with-param name="version" select="substring($version,string-length($tok)+1)"/>
-                   <xsl:with-param name="inst-version" select="substring($inst-version,string-length($inst-tok)+1)"/>
-                 </xsl:call-template>
-               </xsl:when>
-               <xsl:otherwise>
-                 <xsl:copy-of select="number(number($tok) &gt; number($inst-tok))"/>
-               </xsl:otherwise>
-             </xsl:choose>
-          </xsl:otherwise>
-        </xsl:choose>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-
-</xsl:stylesheet>

BLFS/xsl/gen_config.xsl

@@ -1,326 +0,0 @@
-<?xml version="1.0" encoding="ISO-8859-1"?>
-
-<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-    version="1.0">
-
-  <xsl:output method="text"
-              encoding='ISO-8859-1'/>
-
-  <xsl:template match="/">
-    <xsl:apply-templates select="//list"/>
-    <xsl:text>comment ""
-
-menu    "Build settings"
-
-    choice
-        prompt  "Mail server for resolving the MTA dependency"
-        config  MS_sendmail
-                bool    "sendmail"
-        config  MS_postfix
-                bool    "postfix"
-        config  MS_exim
-                bool    "exim"
-    endchoice
-    config  MAIL_SERVER
-        string
-        default "sendmail"        if MS_sendmail
-        default "postfix"         if MS_postfix
-        default "exim"            if MS_exim
-
-    choice
-        prompt  "Dependency level"
-        default DEPLVL_2
-        help
-            Packages included in the dependency graph. Note that the graph
-            itself contains all the dependency information relating those
-            packages.
-
-        config  DEPLVL_1
-        bool    "Required dependencies only"
-
-        config  DEPLVL_2
-        bool    "Required plus recommended dependencies"
-
-        config  DEPLVL_3
-        bool    "Req/rec  plus optional dependencies of requested package(s)"
-
-        config  DEPLVL_4
-        bool    "All non external dependencies"
-
-    endchoice
-    config  optDependency
-        int
-        default 1       if DEPLVL_1
-        default 2       if DEPLVL_2
-        default 3       if DEPLVL_3
-        default 4       if DEPLVL_4
-
-    config  LANGUAGE
-        string "LANG variable in the form ll_CC.charmap[@modifiers]"
-        default "en_US.UTF-8"
-        help
-            Because of the book layout, the 3 fields, ll, CC and charmap are
-            mandatory. The @modifier is honoured if present.
-
-    config  SUDO
-        bool "Build as User"
-        default y
-        help
-            Select if sudo will be used (you build as a normal user)
-                    otherwise sudo is not needed (you build as root)
-
-    config  WRAP_INSTALL
-        bool "Use `porg style' package management"
-        default n
-        help
-            Select if you want the installation commands to be wrapped
-            between "wrapInstall '" and "' ; packInstall" functions,
-            where wrapInstall is used to set up a LD_PRELOAD library (for
-            example using porg), and packInstall makes the package tarball
-
-        config  PACK_INSTALL
-            string     "Location of the packInstall.sh script"
-            default    "/blfs_root/packInstall.sh" if !SUDO
-            default    "$HOME/blfs_root/packInstall.sh" if SUDO
-            depends on WRAP_INSTALL
-            help
-                This script is needed for the proper operation of the
-                `porg style' package management. Provide an absolute
-                path.
-
-    config	DEL_LA_FILES
-    bool "Remove libtool .la files after package installation"
-    default y
-    help
-            This option should be active on any system mixing libtool
-            and meson build systems. ImageMagick .la files are preserved.
-
-    config	STATS
-    bool "Generate statistics for the requested package(s)"
-    default n
-    help
-            If you want timing and memory footprint statistics to be
-            generated for the packages you build (not their dependencies),
-            set this option to y. Due to the book layout, several scripts
-            are not functional in this case. Please review them.
-
-    config	DEP_CHECK
-    bool "Check dependencies of the requested package(s)"
-    default n
-    depends on WRAP_INSTALL
-    help
-      Setting this option does not work if more than one package
-      is selected. It will do the following:
-      - Build the dependency tree and generate a build ordered list
-        disregarding already installed packages
-      - Generate the scripts for the dependencies not already
-        installed (as usual)
-      - Generate a stript that:
-        + removes all unneeded packages using porg
-          (at this point the blfs_tools cannot be used anymore,
-          and your system may be non functional, so use a console
-          for that, not a graphical environment)
-        + installs the package
-        + restores all the previously removed packages
-      Note that this script may not be the last one, if there are runtime
-      dependencies
-
-endmenu
-
-menu "Build Layout"
-    config  SRC_ARCHIVE
-        string  "Directory of sources"
-        default "/sources"
-    config  SRC_SUBDIRS
-        bool    "Downloads sources to subdirectories"
-        default n
-        help
-            If this option is set, the sources will be downloaded and archived
-            into a subdirectory of the source directory, one for each page
-            of the book. Otherwise they are downloaded and archived directly
-            into the source directory
-    config  BUILD_ROOT
-        string  "Build directory"
-        default "/sources"
-        help
-            Directory where the build occurs. It can be the same as the
-            source directory, provided the setting of subdirectories is
-            different
-    config  BUILD_SUBDIRS
-        bool    "Build into subdirectories"
-        default y
-        help
-            If this option is set, the sources will be extracted into
-            subdirectories of the build directory. Otherwise, they will be
-            directly extracted into the build directory
-    config  KEEP_FILES
-        bool    "Keep source directory"
-        default n
-        help
-            Set this option if you want to keep the build directories
-            for further examination after installing the package
-endmenu
-
-menu    "Optimization"
-    config JOBS
-        int     "Number of parallel jobs"
-        default 0
-        help
-            This number will get passed to make or ninja, unless set
-            to 0, in which case, it is set to the number of processors
-            on line. Note that some packages do not respect this setting.
-            Also, "-j1" is always passed to make for install (and nothing
-            to ninja).
-    config CFG_CFLAGS
-        string  "Content of variable CFLAGS"
-        default "EMPTY"
-        help
-            If set to the special string "EMPTY", then CFLAGS will be
-            unset before starting the script. Otherwise, there is no
-            content check for this variable. Double check for typos!
-    config CFG_CXXFLAGS
-        string  "Content of variable CXXFLAGS"
-        default "EMPTY"
-        help
-            If set to the special string "EMPTY", then CXXFLAGS will be
-            unset before starting the script. Otherwise, there is no
-            content check for this variable. Double check for typos!
-    config CFG_LDFLAGS
-        string  "Content of variable LDFLAGS"
-        default "EMPTY"
-        help
-            If set to the special string "EMPTY", then LDFLAGS will be
-            unset before starting the script. Otherwise, there is no
-            content check for this variable. Double check for typos!
-endmenu
-</xsl:text>
-  </xsl:template>
-
-  <xsl:template match="list">
-    <xsl:if
-      test=".//*[self::package or self::module]
-                    [(version and not(inst-version)) or
-                      string(version) != string(inst-version)]">
-      <xsl:text>menuconfig&#9;MENU_</xsl:text>
-      <xsl:value-of select="@id"/>
-      <xsl:text>
-bool&#9;"</xsl:text>
-      <xsl:value-of select="name"/>
-      <xsl:text>"
-default&#9;n
-
-if&#9;MENU_</xsl:text>
-      <xsl:value-of select="@id"/>
-      <xsl:text>
-
-</xsl:text>
-      <xsl:apply-templates select="sublist"/>
-      <xsl:text>endif
-
-</xsl:text>
-    </xsl:if>
-  </xsl:template>
-
-  <xsl:template match="sublist">
-    <xsl:if
-      test=".//*[self::package or self::module]
-                    [(version and not(inst-version)) or
-                      string(version) != string(inst-version)]">
-      <xsl:text>&#9;menuconfig&#9;MENU_</xsl:text>
-      <xsl:value-of select="@id"/>
-      <xsl:text>
-&#9;bool&#9;"</xsl:text>
-      <xsl:value-of select="name"/>
-      <xsl:text>"
-&#9;default&#9;n
-
-&#9;if&#9;MENU_</xsl:text>
-      <xsl:value-of select="@id"/>
-      <xsl:text>
-
-</xsl:text>
-      <xsl:apply-templates select="package"/>
-      <xsl:text>&#9;endif
-
-</xsl:text>
-    </xsl:if>
-  </xsl:template>
-
-  <xsl:template match="package">
-    <xsl:if
-      test="(version and not(inst-version)) or
-                      string(version) != string(inst-version)">
-      <xsl:text>&#9;&#9;config&#9;CONFIG_</xsl:text>
-      <xsl:value-of select="name"/>
-      <xsl:text>
-&#9;&#9;bool&#9;"</xsl:text>
-      <xsl:value-of select="name"/>
-      <xsl:text> </xsl:text>
-      <xsl:value-of select="version"/>
-      <xsl:if test="inst-version">
-        <xsl:text> [Installed </xsl:text>
-        <xsl:value-of select="inst-version"/>
-        <xsl:text>]</xsl:text>
-      </xsl:if>
-      <xsl:text>"
-&#9;&#9;default&#9;n
-
-</xsl:text>
-    </xsl:if>
-    <xsl:if
-      test="not(version) and ./module[not(inst-version) or
-                      string(version) != string(inst-version)]">
-      <xsl:text>&#9;&#9;menuconfig&#9;MENU_</xsl:text>
-      <xsl:value-of select="translate(name,' ()','___')"/>
-      <xsl:text>
-&#9;&#9;bool&#9;"</xsl:text>
-      <xsl:value-of select="name"/>
-      <xsl:text>"
-&#9;&#9;default&#9;n
-
-&#9;&#9;if&#9;MENU_</xsl:text>
-      <xsl:value-of select="translate(name,' ()','___')"/>
-      <xsl:text>
-
-</xsl:text>
-      <xsl:apply-templates select="module"/>
-      <xsl:text>&#9;&#9;endif
-
-</xsl:text>
-    </xsl:if>
-  </xsl:template>
-
-  <xsl:template match="module">
-    <xsl:if
-      test="not(inst-version) or
-            string(version) != string(inst-version)">
-      <xsl:text>&#9;&#9;&#9;config&#9;CONFIG_</xsl:text>
-      <xsl:value-of select="name"/>
-      <xsl:text>
-&#9;&#9;&#9;bool&#9;"</xsl:text>
-      <xsl:value-of select="name"/>
-      <xsl:text> </xsl:text>
-      <xsl:value-of select="version"/>
-      <xsl:if test="inst-version">
-        <xsl:text> [Installed </xsl:text>
-        <xsl:value-of select="inst-version"/>
-        <xsl:text>]</xsl:text>
-      </xsl:if>
-      <xsl:text>"
-&#9;&#9;&#9;default&#9;</xsl:text>
-      <xsl:choose>
-        <xsl:when test="contains(../name,'xorg')">
-          <xsl:text>y
-
-</xsl:text>
-        </xsl:when>
-        <xsl:otherwise>
-          <xsl:text>n
-
-</xsl:text>
-        </xsl:otherwise>
-      </xsl:choose>
-    </xsl:if>
-  </xsl:template>
-
-</xsl:stylesheet>

BLFS/xsl/gen_pkg_list.xsl

@@ -1,503 +0,0 @@
-<?xml version="1.0" encoding="ISO-8859-1"?>
-
-<!-- Takes the blfs-full.xml file and extract a list
-     of packages obeying packdesc.dtd + looks for already
-     installed packages in the tracking file (stringparam
-     'installed-packages') -->
-<!-- Extract also a list of LFS packages from stringparam lfs-full -->
-
-<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-    version="1.0">
-
-  <xsl:param name="lfs-full" select="'./lfs-xml/lfs-full.xml'"/>
-  <xsl:param name="installed-packages" select="'../lib/instpkg.xml'"/>
-
-  <xsl:output method="xml"
-              encoding='ISO-8859-1'
-              doctype-system="./packdesc.dtd"/>
-
-<!-- specialCases.xsl is generated by a shell script:
-     allows for cases where version begins with a letter
-     and when there is no version (such as xorg7 packages) -->
-  <xsl:include href="./specialCases.xsl"/>
-
-  <xsl:template match="/">
-    <princList>
-      <xsl:text>&#xA;&#xA;  </xsl:text>
-      <list>
-        <xsl:attribute name="id">lfs</xsl:attribute>
-        <xsl:text>&#xA;    </xsl:text>
-        <name>LFS Packages</name>
-        <xsl:text>&#xA;    </xsl:text>
-        <sublist>
-          <xsl:attribute name="id">lfs-system</xsl:attribute>
-          <xsl:text>&#xA;      </xsl:text>
-          <name>LFS Final System</name>
-          <xsl:apply-templates
-               select='document($lfs-full)//
-                            chapter[@id="chapter-building-system"]/
-                                 sect1/sect1info'/>
-          <xsl:text>&#xA;    </xsl:text>
-        </sublist>
-        <sublist>
-          <xsl:attribute name="id">lfs-conf</xsl:attribute>
-          <xsl:text>&#xA;      </xsl:text>
-          <name>LFS Configuration files</name>
-          <xsl:apply-templates
-               select='document($lfs-full)//
-                            chapter[@id="chapter-config"]/
-                                 sect1/sect1info[./productname="bootscripts"]'/>
-          <xsl:text>&#xA;    </xsl:text>
-        </sublist>
-        <sublist>
-          <xsl:attribute name="id">lfs-boot</xsl:attribute>
-          <xsl:text>&#xA;      </xsl:text>
-          <name>LFS Making Bootable</name>
-          <xsl:apply-templates select='document($lfs-full)//chapter[@id="chapter-bootable"]/sect1/sect1info[./productname="kernel"]'/>
-          <xsl:text>&#xA;    </xsl:text>
-        </sublist>
-        <sublist>
-          <xsl:attribute name="id">lfs-theend</xsl:attribute>
-          <xsl:text>&#xA;      </xsl:text>
-          <name>LFS The end</name>
-          <xsl:apply-templates select='document($lfs-full)//sect1[@id="ch-finish-theend"]//userinput[starts-with(string(),"echo")]'/>
-          <xsl:text>&#xA;    </xsl:text>
-        </sublist>
-        <xsl:text>&#xA;&#xA;  </xsl:text>
-      </list>
-<!-- How to have blfs-bootscripts versionned? Do not know, so
-     avoid it (TODO ?) -->
-      <xsl:apply-templates select="//part[not(@id='introduction')]"/>
-    </princList>
-  </xsl:template>
-
-  <xsl:template match="userinput">
-<!-- Only used in lFS chapter 9, to retrieve book version -->
-    <package>
-      <name>LFS-Release</name>
-      <xsl:element name="version">
-        <xsl:copy-of select="substring-after(substring-before(string(),' &gt;'),'echo ')"/>
-      </xsl:element>
-      <xsl:if
-          test="document($installed-packages)//package[name='LFS-Release']">
-        <xsl:text>&#xA;        </xsl:text>
-        <xsl:element name="inst-version">
-          <xsl:value-of
-            select="document(
-                     $installed-packages
-                            )//package[name='LFS-Release']/version"/>
-        </xsl:element>
-      </xsl:if>
-    </package>
-  </xsl:template>
-
-  <xsl:template match="sect1info">
-    <xsl:text>      </xsl:text>
-    <xsl:choose>
-<!-- Never update linux headers -->
-      <xsl:when test="./productname='linux-headers'"/>
-<!-- Gcc version is taken from BLFS -->
-      <xsl:when test="./productname='gcc'"/>
-<!-- Shadow version is taken from BLFS -->
-      <xsl:when test="./productname='shadow'"/>
-<!-- Vim version is taken from BLFS -->
-      <xsl:when test="./productname='vim'"/>
-<!-- Dbus version is taken from BLFS -->
-      <xsl:when test="./productname='dbus'"/>
-<!-- Systemd version is taken from BLFS -->
-      <xsl:when test="./productname='systemd'"/>
-<!-- Same for python3 -->
-      <xsl:when test="./productname='Python'"/>
-      <xsl:otherwise>
-        <package><xsl:text>&#xA;        </xsl:text>
-          <xsl:element name="name">
-            <xsl:value-of select="./productname"/>
-          </xsl:element>
-          <xsl:text>&#xA;        </xsl:text>
-          <xsl:element name="version">
-            <xsl:value-of select="./productnumber"/>
-          </xsl:element>
-          <xsl:if
-              test="document($installed-packages)//package[name=current()/productname]">
-            <xsl:text>&#xA;        </xsl:text>
-            <xsl:element name="inst-version">
-              <xsl:value-of
-                select="document(
-                         $installed-packages
-                                )//package[name=current()/productname]/version"/>
-            </xsl:element>
-          </xsl:if>
-        </package>
-      </xsl:otherwise>
-    </xsl:choose>
-<!-- No deps for now: a former version  is always installed -->
-  </xsl:template>
-
-  <xsl:template match="part">
-    <xsl:if test="count(.//*[contains(translate(@xreflabel,
-                                               '123456789',
-                                               '000000000'),
-                                      '-0')
-                            ]) &gt; 0">
-      <xsl:text>  </xsl:text>
-      <list>
-        <xsl:attribute name="id"><xsl:value-of select="@id"/></xsl:attribute>
-        <xsl:text>&#xA;    </xsl:text>
-        <xsl:element name="name">
-           <xsl:value-of select="normalize-space(title)"/>
-        </xsl:element>
-        <xsl:text>&#xA;&#xA;</xsl:text>
-        <xsl:apply-templates select="chapter"/>
-        <xsl:text>  </xsl:text>
-      </list>
-      <xsl:text>&#xA;&#xA;</xsl:text>
-    </xsl:if>
-  </xsl:template>
-
-  <xsl:template match="chapter">
-    <xsl:if test="count(.//*[contains(translate(@xreflabel,
-                                               '123456789',
-                                               '000000000'),
-                                      '-0')
-                            ]) &gt; 0 or @id='postlfs-config'">
-<!-- With the removal of lsb-release, there are no more versioned package
-     in the After LFS configuration issue chapter, so test explicitly -->
-      <xsl:text>    </xsl:text>
-      <sublist>
-        <xsl:attribute name="id"><xsl:value-of select="@id"/></xsl:attribute>
-        <xsl:text>&#xA;      </xsl:text>
-        <xsl:element name="name">
-          <xsl:value-of select="normalize-space(title)"/>
-        </xsl:element>
-        <xsl:text>&#xA;</xsl:text>
-        <xsl:apply-templates select=".//sect1">
-          <xsl:sort select="@id"/>
-        </xsl:apply-templates>
-      <xsl:text>    </xsl:text>
-      </sublist><xsl:text>&#xA;&#xA;</xsl:text>
-    </xsl:if>
-  </xsl:template>
-
-  <xsl:template match="sect1">
-    <xsl:choose>
-<!-- This test is to find sections containing modules (PERL, Python
-      DBus,...) -->
-      <xsl:when
-        test="not(contains(translate(@xreflabel,
-                                     '123456789',
-                                     '000000000'),
-                           '-0')) and
-              count(descendant::node()[contains(translate(@xreflabel,
-                                                         '123456789',
-                                                         '000000000'),
-                                                '-0')
-                                      ]) &gt; 0">
-        <xsl:text>      </xsl:text>
-        <package><xsl:text>&#xA;        </xsl:text>
-          <xsl:element name="name">
-            <xsl:value-of select="normalize-space(title)"/>
-          </xsl:element>
-          <xsl:text>&#xA;</xsl:text>
-<!-- Do not use .//*, which would include self.
-     Even a module can be a special case, so
-     call the template of specialCases.xsl,
-     which calls the "normal" template when the
-     case is normal. -->
-          <xsl:apply-templates select="descendant::*" mode="special">
-            <xsl:sort select="@id"/>
-          </xsl:apply-templates>
-          <xsl:text>      </xsl:text>
-        </package><xsl:text>&#xA;&#xA;</xsl:text>
-      </xsl:when>
-      <xsl:otherwise>
-<!-- Calls the template of specialCases.xsl,
-     which calls the "normal" template when the
-     case is normal. -->
-        <xsl:apply-templates select='.' mode="special">
-          <xsl:sort select="@id"/>
-        </xsl:apply-templates>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-
-  <xsl:template match="*" mode="normal">
-    <xsl:variable name="version">
-      <xsl:call-template name="version">
-        <xsl:with-param name="label" select="./@xreflabel"/>
-      </xsl:call-template>
-    </xsl:variable>
-    <xsl:choose>
-<!-- If there is a "sect1" ancestor, this means that
-     we have a module -->
-      <xsl:when test="ancestor::sect1">
-        <xsl:text>        </xsl:text>
-        <module><xsl:text>&#xA;          </xsl:text>
-          <xsl:element name="name">
-            <xsl:value-of select="./@id"/>
-          </xsl:element>
-          <xsl:text>&#xA;          </xsl:text>
-          <xsl:element name="version">
-            <xsl:value-of select="$version"/>
-          </xsl:element>
-          <xsl:if
-              test="document($installed-packages)//package[name=current()/@id]">
-            <xsl:text>&#xA;          </xsl:text>
-            <xsl:element name="inst-version">
-              <xsl:value-of
-                select="document(
-                         $installed-packages
-                                )//package[name=current()/@id]/version"/>
-            </xsl:element>
-          </xsl:if>
-<!-- Dependencies -->
-<!-- First the case of python modules or d-bus bindings -->
-          <xsl:if test="self::sect2">
-<!-- dependencies  -->
-            <xsl:apply-templates select=".//para[@role='required' or
-                                                 @role='recommended' or
-                                                 @role='optional']"
-                                 mode="dependency"/>
-          </xsl:if>
-<!-- For python modules, the preceding module is an optional dep -->
-            <xsl:if test="ancestor::sect1[@id='python-modules']">
-              <xsl:apply-templates
-                  select="preceding-sibling::sect2[@role='package']
-                           //listitem[para/xref/@linkend=current()/@id]"
-                  mode="prec-dep"/>
-            </xsl:if>
-<!-- Now the case of perl modules: let us test our XSLT abilities.
-     Well, "use the sibling, Luke" -->
-          <xsl:if test="self::bridgehead">
-            <xsl:apply-templates select="following-sibling::itemizedlist[1]
-                                        /listitem/itemizedlist/listitem"
-                                 mode="perlmod-dep">
-               <xsl:sort select="position()"
-                         data-type="number"
-                         order="descending"/>
-            </xsl:apply-templates>
-          </xsl:if>
-<!-- End dependencies -->
-          <xsl:text>&#xA;        </xsl:text>
-        </module><xsl:text>&#xA;</xsl:text>
-      </xsl:when>
-      <xsl:otherwise>
-         <xsl:text>      </xsl:text>
-        <package><xsl:text>&#xA;        </xsl:text>
-          <xsl:element name="name">
-            <xsl:value-of select="./@id"/>
-          </xsl:element>
-          <xsl:text>&#xA;        </xsl:text>
-          <xsl:element name="version">
-            <xsl:value-of select="$version"/>
-          </xsl:element>
-          <xsl:if
-              test="document($installed-packages)//package[name=current()/@id]">
-            <xsl:text>&#xA;        </xsl:text>
-            <xsl:element name="inst-version">
-              <xsl:value-of
-                select="document(
-                         $installed-packages
-                                )//package[name=current()/@id]/version"/>
-            </xsl:element>
-          </xsl:if>
-<!-- Dependencies -->
-<!-- If in Xorg (not anymore) or KDE chapter, consider that the preceding
-     package is the first dependency (not always noted in the book)-->
-          <xsl:if test="ancestor::chapter[@id='kde4-core'
-                                       or @id='xfce-core'
-                                       or @id='lxqt-desktop'
-                                       or @id='lxde-desktop']
-                    and preceding-sibling::sect1[1]">
-            <xsl:text>
-            </xsl:text>
-            <xsl:element name="dependency">
-              <xsl:attribute name="status">required</xsl:attribute>
-              <xsl:attribute name="build">before</xsl:attribute>
-              <xsl:attribute name="name">
-                <xsl:value-of select="preceding-sibling::sect1[1]/@id"/>
-              </xsl:attribute>
-              <xsl:attribute name="type">ref</xsl:attribute>
-            </xsl:element>
-          </xsl:if>
-          <xsl:apply-templates select=".//para[@role='required' or
-                                               @role='recommended' or
-                                               @role='optional']"
-                               mode="dependency"/>
-<!-- End dependencies -->
-          <xsl:text>&#xA;      </xsl:text>
-        </package><xsl:text>&#xA;</xsl:text>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-
-  <xsl:template name="version">
-    <xsl:param name="label" select="abc-2"/>
-    <xsl:variable name="start" select="string-length(substring-before(translate($label,'123456789','000000000'),'-0'))+2"/>
-    <xsl:variable name="prelim-ver" select="substring($label,$start)"/>
-    <xsl:choose>
-      <xsl:when test="contains($prelim-ver,'onfiguration')"/>
-      <xsl:when test="contains($prelim-ver,'escription')"/>
-      <xsl:when test="contains($prelim-ver,'EggDBus')">
-        <xsl:value-of select="substring-before($prelim-ver,' (EggDBus)')"/>
-      </xsl:when>
-      <xsl:when test="contains($label,'JDK')">
-        <xsl:value-of select="translate($prelim-ver,' ','_')"/>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:value-of select="$prelim-ver"/>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-
-  <xsl:template match="para" mode="dependency">
-    <xsl:variable name="status" select="./@role"/>
-<!-- First internal dependencies -->
-    <xsl:for-each select=".//xref">
-      <xsl:choose>
-<!-- Avoid depending of myself -->
-        <xsl:when test="ancestor::*[@id=current()/@linkend]"/>
-<!-- do not depend on something which is not a dependency -->
-        <xsl:when test="@role='nodep'"/>
-<!-- Call list expansion when we have an xorg7 series of packages -->
-        <xsl:when test="contains(@linkend,'xorg7-')">
-          <xsl:call-template name="expand-deps">
-            <xsl:with-param name="section">
-              <xsl:value-of select="@linkend"/>
-            </xsl:with-param>
-            <xsl:with-param name="status">
-              <xsl:value-of select="$status"/>
-            </xsl:with-param>
-            <xsl:with-param name="build">
-              <xsl:choose>
-                <xsl:when test="@role='runtime'">after</xsl:when>
-                <xsl:when test="@role='first'">first</xsl:when>
-                <xsl:otherwise>before</xsl:otherwise>
-              </xsl:choose>
-            </xsl:with-param>
-          </xsl:call-template>
-        </xsl:when>
-        <xsl:otherwise>
-          <xsl:text>
-            </xsl:text>
-          <xsl:element name="dependency">
-            <xsl:attribute name="status">
-              <xsl:value-of select="$status"/>
-            </xsl:attribute>
-            <xsl:attribute name="build">
-              <xsl:choose>
-                <xsl:when test="@role='runtime'">after</xsl:when>
-                <xsl:when test="@role='first'">first</xsl:when>
-                <xsl:otherwise>before</xsl:otherwise>
-              </xsl:choose>
-            </xsl:attribute>
-            <xsl:attribute name="name">
-              <xsl:value-of select="@linkend"/>
-            </xsl:attribute>
-            <xsl:attribute name="type">ref</xsl:attribute>
-          </xsl:element>
-        </xsl:otherwise>
-      </xsl:choose>
-    </xsl:for-each>
-<!-- then external dependencies -->
-    <xsl:for-each select=".//ulink">
-      <xsl:choose>
-<!-- do not depend on something which is not a dependency -->
-        <xsl:when test="@role='nodep'"/>
-        <xsl:otherwise>
-          <xsl:text>
-            </xsl:text>
-          <xsl:element name="dependency">
-            <xsl:attribute name="status">
-              <xsl:value-of select="$status"/>
-            </xsl:attribute>
-            <xsl:attribute name="build">
-              <xsl:choose>
-                <xsl:when test="@role='runtime'">after</xsl:when>
-                <xsl:when test="@role='first'">first</xsl:when>
-                <xsl:otherwise>before</xsl:otherwise>
-              </xsl:choose>
-            </xsl:attribute>
-            <xsl:attribute name="name">
-              <xsl:value-of select="translate(normalize-space(text()),' /,()','-----')"/>
-            </xsl:attribute>
-            <xsl:attribute name="type">link</xsl:attribute>
-          </xsl:element>
-        </xsl:otherwise>
-      </xsl:choose>
-    </xsl:for-each>
-  </xsl:template>
-
-  <xsl:template match="listitem" mode="prec-dep">
-    <xsl:if test="preceding-sibling::listitem">
-      <xsl:text>
-            </xsl:text>
-      <xsl:element name="dependency">
-<!-- the dep on the preceding package used to be required for python.
-     It seems optional now -->
-        <xsl:attribute name="status">optional</xsl:attribute>
-        <xsl:attribute name="build">before</xsl:attribute>
-        <xsl:attribute name="name">
-          <xsl:value-of select="preceding-sibling::listitem[1]//@linkend"/>
-        </xsl:attribute>
-        <xsl:attribute name="type">ref</xsl:attribute>
-      </xsl:element>
-    </xsl:if>
-  </xsl:template>
-
-  <xsl:template match="listitem" mode="perlmod-dep">
-    <xsl:param name="glue" select="'&#xA;            '"/>
-    <xsl:choose>
-     <xsl:when test="para/xref[not(@role) or @role != 'nodep']|para[@id]/ulink">
-      <xsl:value-of select="$glue"/>
-      <xsl:element name="dependency">
-        <xsl:attribute name="status">
-          <xsl:choose>
-            <xsl:when
-              test="count(./para/text()[contains(string(),
-                                             'ptional')
-                                   ]
-                         )&gt;0">optional</xsl:when>
-            <xsl:otherwise>required</xsl:otherwise>
-          </xsl:choose>
-        </xsl:attribute>
-        <xsl:attribute name="build">
-          <xsl:choose>
-            <xsl:when test="para/xref/@role='runtime'">after</xsl:when>
-            <xsl:when test="para/ulink/@role='runtime'">after</xsl:when>
-            <xsl:otherwise>before</xsl:otherwise>
-          </xsl:choose>
-        </xsl:attribute>
-        <xsl:attribute name="name">
-          <xsl:if test="para/xref">
-            <xsl:value-of select="para/xref/@linkend"/>
-          </xsl:if>
-          <xsl:if test="para/ulink">
-            <xsl:value-of select="para/@id"/>
-          </xsl:if>
-        </xsl:attribute>
-        <xsl:attribute name="type">
-          <xsl:if test="para/xref">ref</xsl:if>
-          <xsl:if test="para/ulink">link</xsl:if>
-        </xsl:attribute>
-        <xsl:apply-templates select="itemizedlist/listitem"
-                             mode="perlmod-dep">
-           <xsl:sort select="position()"
-                     data-type="number"
-                     order="descending"/>
-          <xsl:with-param name="glue" select="concat($glue,'  ')"/>
-        </xsl:apply-templates>
-      </xsl:element>
-     </xsl:when>
-     <xsl:otherwise>
-       <xsl:apply-templates select="itemizedlist/listitem"
-                            mode="perlmod-dep">
-         <xsl:sort select="position()"
-                   data-type="number"
-                   order="descending"/>
-         <xsl:with-param name="glue" select="$glue"/>
-       </xsl:apply-templates>
-     </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-
-</xsl:stylesheet>

BLFS/xsl/get_version.xsl

@@ -1,31 +0,0 @@
-<?xml version="1.0"?>
-
-<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-    version="1.0">
-
-  <xsl:output method="text"/>
-
-  <xsl:param name="package" select="'gcc'"/>
-
-  <xsl:key name="depnode"
-           match="package|module"
-           use="name"/>
-
-  <xsl:template match="/">
-    <xsl:apply-templates select="key('depnode',$package)"/>
-  </xsl:template>
-
-  <xsl:template match="package|module">
-    <xsl:value-of select="./version"/>
-    <xsl:text>&#xA;</xsl:text>
-    <xsl:choose>
-      <xsl:when test="./inst-version">
-        <xsl:value-of select="./inst-version"/>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:text>0</xsl:text>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-
-</xsl:stylesheet>

BLFS/xsl/lfs_make_book.xsl

@@ -1,236 +0,0 @@
-<?xml version="1.0" encoding="ISO-8859-1"?>
-
-<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-                version="1.0">
-
-  <xsl:key name="idlfs" match="sect1" use="sect1info/productname"/>
-
-  <xsl:template name="detect-lfs">
-    <xsl:param name="package"/>
-    <xsl:param name="lfsbook"/>
-    <xsl:choose>
-      <xsl:when test="$package='gcc' or
-                      $package='dbus' or
-                      $package='vim' or
-                      $package='systemd' or
-                      $package='Python' or
-                      $package='shadow'"/>
-      <xsl:when test="$package='bootscripts'">true</xsl:when>
-      <xsl:when test="$package='kernel'">true</xsl:when>
-      <xsl:when test="$package='LFS-Release'">true</xsl:when>
-      <xsl:otherwise>
-        <xsl:for-each select="document($lfsbook)">
-          <xsl:copy-of select="boolean(key('idlfs',$package)/ancestor::chapter[@id='chapter-building-system'])"/>
-        </xsl:for-each>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-
-  <xsl:template name="process-lfs">
-    <xsl:param name="package"/>
-    <xsl:param name="lfsbook"/>
-    <xsl:choose>
-      <xsl:when test="$package='gcc' or
-                      $package='dbus' or
-                      $package='vim' or
-                      $package='systemd' or
-                      $package='Python' or
-                      $package='shadow'"/>
-      <xsl:when test="$package='bootscripts'">
-        <xsl:for-each select="document($lfsbook)">
-          <xsl:apply-templates select="key('idlfs',$package)[ancestor::chapter/@id='chapter-config']" mode="lfs"/>
-        </xsl:for-each>
-      </xsl:when>
-      <xsl:when test="$package='kernel'">
-        <xsl:for-each select="document($lfsbook)">
-          <xsl:apply-templates select="key('idlfs',$package)[ancestor::chapter/@id='chapter-bootable']" mode="lfs"/>
-        </xsl:for-each>
-      </xsl:when>
-      <xsl:when test="$package='LFS-Release'">
-        <sect1 id="LFS-Release">
-          <xsl:apply-templates select="document($lfsbook)//sect1[@id='ch-finish-theend']/*" mode="lfs-remap"/>
-        </sect1>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:for-each select="document($lfsbook)">
-          <xsl:apply-templates select="key('idlfs',$package)[ancestor::chapter/@id='chapter-building-system']" mode="lfs"/>
-        </xsl:for-each>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-
-  <xsl:template match="*" mode="lfs">
-    <xsl:choose>
-<!--variablelist may contain id attributes equal to the name of the package,
-    which generates non-unique id. They are of not much use (short descriptions)
-    here. So just remove them-->
-      <xsl:when test="self::variablelist"/>
-<!--The id's in lfs are of the form ch-xxx-package. We do not want to
-    use that for file names and the like. So change the id-->
-      <xsl:when test="self::sect1">
-        <xsl:element name="sect1">
-          <xsl:attribute name="id">
-            <xsl:choose>
-              <xsl:when
-                  test="./sect1info/productname=
-                                   'bootscripts'">lfs-bootscripts</xsl:when>
-              <xsl:otherwise>
-                <xsl:value-of select="./sect1info/productname"/>
-              </xsl:otherwise>
-            </xsl:choose>
-          </xsl:attribute>
-          <xsl:apply-templates mode="lfs"/>
-        </xsl:element>
-      </xsl:when>
-      <xsl:when test=".//sect2">
-        <xsl:element name="{name()}">
-          <xsl:for-each select="attribute::*">
-            <xsl:attribute name="{name()}">
-              <xsl:value-of select="."/>
-            </xsl:attribute>
-          </xsl:for-each>
-          <xsl:apply-templates mode="lfs"/>
-        </xsl:element>
-      </xsl:when>
-      <xsl:when test="self::sect2[@role='package']">
-        <xsl:variable name="url" select="../sect1info/address/text()"/>
-        <xsl:variable name="md5" select="//sect1[@id='materials-packages']//ulink[@url=$url]/../following-sibling::para/literal/text()"/>
-        <xsl:variable name="patch">
-          <xsl:call-template name="find-patch"/>
-        </xsl:variable>
-        <sect2 role="package">
-          <xsl:copy-of select="./*"/>
-          <bridgehead renderas="sect3">Package Information</bridgehead>
-          <itemizedlist spacing="compact">
-            <listitem>
-              <para>
-                Download (HTTP): <!--<xsl:element name="ulink">
-                  <xsl:attribute name="url">
-                    <xsl:value-of select="$url"/>
-                  </xsl:attribute>
-                </xsl:element>--><ulink url="{$url}"/>
-              </para>
-            </listitem>
-            <listitem>
-              <para>
-                Download (FTP): <ulink url=" "/>
-              </para>
-            </listitem>
-            <listitem>
-              <para>
-                Download MD5 sum: <xsl:value-of select="$md5"/>
-              </para>
-            </listitem>
-          </itemizedlist>
-          <xsl:if test="string-length($patch)&gt;10">
-            <bridgehead renderas="sect3">Additional Downloads</bridgehead>
-            <itemizedlist spacing="compact">
-              <listitem>
-                <para>
-                  Required patch:
-                  <ulink url="{$patch}"/>
-                </para>
-              </listitem>
-            </itemizedlist>
-          </xsl:if>
-        </sect2>
-      </xsl:when>
-      <xsl:when test="self::sect2[@role='installation']">
-        <sect2 role="installation">
-          <xsl:apply-templates mode="lfs-remap"/>
-        </sect2>
-      </xsl:when>
-      <xsl:when test="self::sect2[@role='configuration']">
-        <sect2 role="configuration">
-          <xsl:apply-templates mode="lfs-remap"/>
-        </sect2>
-      </xsl:when>
-      <xsl:when test="self::sect2">
-        <xsl:element name="sect2">
-          <xsl:for-each select="attribute::*">
-            <xsl:attribute name="{name()}">
-              <xsl:value-of select="."/>
-            </xsl:attribute>
-          </xsl:for-each>
-          <xsl:apply-templates mode="lfs"/>
-        </xsl:element>
-      </xsl:when>
-      <xsl:otherwise><!--
-        <xsl:element name="{name()}">
-          <xsl:for-each select="attribute::*">
-            <xsl:attribute name="{name()}">
-              <xsl:value-of select="."/>
-            </xsl:attribute>
-          </xsl:for-each>
-          <xsl:apply-templates/>
-        </xsl:element>-->
-        <xsl:copy-of select="."/>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-
-  <xsl:template name="find-patch">
-    <xsl:variable name="patch-command" select="..//userinput[contains(string(),'patch -Np1')]/text()"/>
-    <xsl:variable name="patch" select="substring-after($patch-command,'../')"/>
-    <xsl:if test="string-length($patch) &gt; 10">
-      <xsl:value-of select="//sect1[@id='materials-patches']//ulink/@url[contains(string(),$patch)]"/>
-    </xsl:if>
-  </xsl:template>
-
-  <xsl:template match="*" mode="lfs-remap">
-    <xsl:choose>
-      <xsl:when test=".//screen">
-        <xsl:element name="{name()}">
-          <xsl:for-each select="attribute::*">
-            <xsl:attribute name="{name()}">
-              <xsl:value-of select="."/>
-            </xsl:attribute>
-          </xsl:for-each>
-          <xsl:apply-templates mode="lfs-remap"/>
-        </xsl:element>
-      </xsl:when>
-      <xsl:when test="self::screen">
-        <xsl:choose>
-<!-- Since we are using the *-full.xml files, revisions have already been
-     selected, so no need to bother about revision attributes-->
-          <xsl:when test="@role='nodump'">
-            <xsl:copy-of select="."/>
-          </xsl:when>
-          <xsl:when test="contains(string(),'&lt;your name here&gt;')">
-            <screen role="root"><userinput>
-              <xsl:copy-of
-                select="substring-before(string(),'&lt;your name here&gt;')"/>
-              <xsl:text>jhalfs</xsl:text>
-              <xsl:copy-of
-                select="substring-after(string(),'&lt;your name here&gt;')"/>
-            </userinput></screen>
-          </xsl:when>
-          <xsl:when test="./userinput[@remap='install' or not(@remap)]">
-            <screen role="root">
-              <xsl:copy-of select="./*"/>
-            </screen>
-          </xsl:when>
-          <xsl:when test="./userinput[@remap='test']">
-            <para><command>
-              <xsl:copy-of select="./userinput/text()"/>
-            </command></para>
-          </xsl:when>
-          <xsl:otherwise>
-            <xsl:copy-of select="."/>
-          </xsl:otherwise>
-        </xsl:choose>
-      </xsl:when>
-      <xsl:otherwise><!--
-        <xsl:copy-of select="."/>-->
-        <xsl:element name="{name()}">
-          <xsl:for-each select="attribute::*">
-            <xsl:attribute name="{name()}">
-              <xsl:value-of select="."/>
-            </xsl:attribute>
-          </xsl:for-each>
-          <xsl:apply-templates mode="sect1"/>
-        </xsl:element>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-</xsl:stylesheet>

BLFS/xsl/list_lfs.xsl

@@ -1,25 +0,0 @@
-<?xml version="1.0" encoding="ISO-8859-1"?>
-
-<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-                version="1.0">
-
-  <xsl:output method="text"/>
-
-  <xsl:template match="/">
-    <xsl:text>bootscripts </xsl:text>
-    <xsl:text>lfs-bootscripts </xsl:text>
-    <xsl:text>kernel </xsl:text>
-    <xsl:text>porg </xsl:text>
-    <xsl:text>tzdata </xsl:text>
-    <!-- the next two packages are not in LFS, but jhalfs needs them -->
-    <xsl:text>sudo </xsl:text>
-    <xsl:text>wget </xsl:text>
-    <xsl:apply-templates select=".//chapter[@id='chapter-building-system']/sect1/sect1info/productname"/>
-  </xsl:template>
-
-  <xsl:template match="productname">
-    <xsl:copy-of select="text()"/>
-    <xsl:text> </xsl:text>
-  </xsl:template>
-
-</xsl:stylesheet>

BLFS/xsl/make_book.xsl

@@ -1,697 +0,0 @@
-<?xml version="1.0" encoding="ISO-8859-1"?>
-
-<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-                version="1.0">
-
-  <xsl:param name="list" select="''"/>
-  <xsl:param name="MTA" select="'sendmail'"/>
-  <xsl:param name="lfsbook" select="'lfs-full.xml'"/>
-
-<!-- Check whether the book is sysv or systemd -->
-  <xsl:variable name="rev">
-    <xsl:choose>
-      <xsl:when test="//bookinfo/title/phrase[@revision='systemd']">
-        <xsl:text>systemd</xsl:text>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:text>sysv</xsl:text>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:variable>
-
-  <xsl:output
-    method="xml"
-    encoding="ISO-8859-1"
-    doctype-system="http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd"/>
-
-  <xsl:include href="lfs_make_book.xsl"/>
-
-  <xsl:template match="/">
-    <book>
-      <xsl:copy-of select="/book/bookinfo"/>
-      <preface>
-        <?dbhtml filename="preface.html"?>
-        <title>Preface</title>
-        <xsl:choose>
-          <xsl:when test="$rev='sysv'">
-            <xsl:copy-of select="id('bootscripts')"/>
-          </xsl:when>
-          <xsl:otherwise>
-            <xsl:copy-of select="id('systemd-units')"/>
-          </xsl:otherwise>
-        </xsl:choose>
-      </preface>
-      <chapter>
-        <?dbhtml filename="chapter.html"?>
-        <title>Installing packages in dependency build order</title>
-        <xsl:call-template name="apply-list">
-          <xsl:with-param name="list" select="normalize-space($list)"/>
-        </xsl:call-template>
-      </chapter>
-      <xsl:copy-of select="id('CC')"/>
-      <xsl:copy-of select="id('MIT')"/>
-      <index/>
-    </book>
-  </xsl:template>
-
-<!-- apply-templates for each item in the list.
-     Normally, those items are id of nodes.
-     Those nodes can be sect1 (normal case),
-     sect2 (python modules or DBus bindings)
-     bridgehead (perl modules)
-     para (dependency of perl modules).
-     The templates after this one treat each of those cases.
-     However, some items are xorg package names, and not id.
-     We need special instructions in that case.
-     The difficulty is that some of those names *are* id's,
-     because they are referenced in the index.
-     Hopefully, none of those id's are sect{1,2}, bridgehead or para...-->
-  <xsl:template name="apply-list">
-    <xsl:param name="list" select="''"/>
-    <xsl:if test="string-length($list) &gt; 0">
-      <xsl:choose>
-        <xsl:when test="contains($list,' ')">
-          <xsl:call-template name="apply-list">
-            <xsl:with-param name="list"
-                            select="substring-before($list,' ')"/>
-          </xsl:call-template>
-          <xsl:call-template name="apply-list">
-            <xsl:with-param name="list"
-                            select="substring-after($list,' ')"/>
-          </xsl:call-template>
-        </xsl:when>
-        <xsl:when test="contains($list,'groupxx')"/>
-        <xsl:otherwise>
-          <xsl:variable name="is-lfs">
-            <xsl:call-template name="detect-lfs">
-              <xsl:with-param name="package" select="$list"/>
-              <xsl:with-param name="lfsbook" select="$lfsbook"/>
-            </xsl:call-template>
-          </xsl:variable>
-          <xsl:choose>
-            <xsl:when test="$is-lfs='true'">
-              <xsl:message>
-                <xsl:value-of select="$list"/>
-                <xsl:text> is an lfs package</xsl:text>
-              </xsl:message>
-              <xsl:call-template name="process-lfs">
-                <xsl:with-param name="package" select="$list"/>
-                <xsl:with-param name="lfsbook" select="$lfsbook"/>
-              </xsl:call-template>
-            </xsl:when>
-            <xsl:when test="contains(concat($list,' '),'-pass1 ')">
-<!-- We need to do it only for sect1 and sect2, because of libva -->
-              <xsl:variable
-                   name="real-id"
-                   select="substring-before(concat($list,' '),'-pass1 ')"/>
-              <xsl:if test="id($real-id)[self::sect1]">
-                <xsl:apply-templates select="id($real-id)" mode="pass1"/>
-              </xsl:if>
-              <xsl:if test="id($real-id)[self::sect2]">
-                <xsl:apply-templates select="id($real-id)" mode="pass1-sect2"/>
-              </xsl:if>
-            </xsl:when>
-            <xsl:when test="not(id($list)[self::sect1 or self::sect2 or self::para or self::bridgehead])">
-              <xsl:apply-templates
-                   select="//sect1[contains(@id,'xorg7')
-                               and contains(string(.//userinput),
-                                            concat($list,'-'))]"
-                   mode="xorg">
-                <xsl:with-param name="package" select="$list"/>
-              </xsl:apply-templates>
-            </xsl:when>
-            <xsl:otherwise>
-              <xsl:apply-templates select="id($list)"/>
-            </xsl:otherwise>
-          </xsl:choose>
-        </xsl:otherwise>
-      </xsl:choose>
-    </xsl:if>
-  </xsl:template>
-
-<!-- The normal case : just copy to the book. Exceptions are if there
-     is a xref, so use a special "mode" template -->
-  <xsl:template match="sect1">
-    <xsl:apply-templates select="." mode="sect1"/>
-  </xsl:template>
-
-  <xsl:template match="*" mode="pass1">
-    <xsl:choose>
-      <xsl:when test="self::xref">
-        <xsl:choose>
-          <xsl:when test="contains(concat(' ',normalize-space($list),' '),
-                                   concat(' ',@linkend,' '))">
-            <xsl:choose>
-              <xsl:when test="@linkend='x-window-system' or @linkend='xorg7'">
-                <xref linkend="xorg7-server"/>
-              </xsl:when>
-              <xsl:when test="@linkend='server-mail'">
-                <xref linkend="{$MTA}"/>
-              </xsl:when>
-              <xsl:otherwise>
-                <xsl:copy-of select="."/>
-              </xsl:otherwise>
-            </xsl:choose>
-          </xsl:when>
-          <xsl:otherwise>
-            <xsl:choose>
-              <xsl:when test="@linkend='bootscripts' or
-                              @linkend='systemd-units'">
-                <xsl:copy-of select="."/>
-              </xsl:when>
-              <xsl:otherwise>
-                <xsl:value-of select="@linkend"/> (in full book)
-              </xsl:otherwise>
-            </xsl:choose>
-          </xsl:otherwise>
-        </xsl:choose>
-      </xsl:when>
-      <xsl:when test="@id">
-        <xsl:element name="{name()}">
-          <xsl:for-each select="attribute::*">
-            <xsl:attribute name="{name()}">
-              <xsl:value-of select="."/>
-              <xsl:if test="name() = 'id'">-pass1</xsl:if>
-            </xsl:attribute>
-          </xsl:for-each>
-          <xsl:apply-templates mode="pass1"/>
-        </xsl:element>
-      </xsl:when>
-      <xsl:when test=".//xref | .//@id">
-        <xsl:element name="{name()}">
-          <xsl:for-each select="attribute::*">
-            <xsl:attribute name="{name()}">
-              <xsl:value-of select="."/>
-            </xsl:attribute>
-          </xsl:for-each>
-          <xsl:apply-templates mode="pass1"/>
-        </xsl:element>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:copy-of select="."/>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-
-  <xsl:template match="*" mode="pass1-sect2">
-    <xsl:choose>
-      <xsl:when test="self::sect2">
-        <xsl:element name="sect1">
-          <xsl:attribute name="id"><xsl:value-of select="@id"/>-pass1</xsl:attribute>
-          <xsl:attribute name="xreflabel"><xsl:value-of select="@xreflabel"/></xsl:attribute>
-          <xsl:processing-instruction name="dbhtml">filename="<xsl:value-of
-                          select="@id"/>-pass1.html"</xsl:processing-instruction>
-          <xsl:apply-templates mode="pass1-sect2"/>
-        </xsl:element>
-      </xsl:when>
-      <xsl:when test="self::sect3">
-        <xsl:element name="sect2">
-          <xsl:attribute name="role">
-            <xsl:value-of select="@role"/>
-          </xsl:attribute>
-          <xsl:apply-templates mode="pass1-sect2"/>
-        </xsl:element>
-      </xsl:when>
-      <xsl:when test="self::bridgehead">
-        <xsl:element name="bridgehead">
-          <xsl:attribute name="renderas">
-            <xsl:if test="@renderas='sect4'">sect3</xsl:if>
-            <xsl:if test="@renderas='sect5'">sect4</xsl:if>
-          </xsl:attribute>
-          <xsl:value-of select='.'/>
-        </xsl:element>
-      </xsl:when>
-      <xsl:when test="self::xref">
-        <xsl:choose>
-          <xsl:when test="contains(concat(' ',normalize-space($list),' '),
-                                   concat(' ',@linkend,' '))">
-            <xsl:choose>
-              <xsl:when test="@linkend='x-window-system' or @linkend='xorg7'">
-                <xref linkend="xorg7-server"/>
-              </xsl:when>
-              <xsl:when test="@linkend='server-mail'">
-                <xref linkend="{$MTA}"/>
-              </xsl:when>
-              <xsl:otherwise>
-                <xsl:copy-of select="."/>
-              </xsl:otherwise>
-            </xsl:choose>
-          </xsl:when>
-          <xsl:otherwise>
-            <xsl:choose>
-              <xsl:when test="@linkend='bootscripts' or
-                              @linkend='systemd-units'">
-                <xsl:copy-of select="."/>
-              </xsl:when>
-              <xsl:otherwise>
-                <xsl:value-of select="@linkend"/> (in full book)
-              </xsl:otherwise>
-            </xsl:choose>
-          </xsl:otherwise>
-        </xsl:choose>
-      </xsl:when>
-      <xsl:when test="@id">
-        <xsl:element name="{name()}">
-          <xsl:for-each select="attribute::*">
-            <xsl:attribute name="{name()}">
-              <xsl:value-of select="."/>
-              <xsl:if test="name() = 'id'">-pass1</xsl:if>
-            </xsl:attribute>
-          </xsl:for-each>
-          <xsl:apply-templates mode="pass1-sect2"/>
-        </xsl:element>
-      </xsl:when>
-      <xsl:when test=".//xref | .//@id">
-        <xsl:element name="{name()}">
-          <xsl:for-each select="attribute::*">
-            <xsl:attribute name="{name()}">
-              <xsl:value-of select="."/>
-            </xsl:attribute>
-          </xsl:for-each>
-          <xsl:apply-templates mode="pass1-sect2"/>
-        </xsl:element>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:copy-of select="."/>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-
-  <xsl:template match="processing-instruction()" mode="pass1">
-    <xsl:variable name="pi-full" select="string()"/>
-    <xsl:variable name="pi-value"
-                  select="substring-after($pi-full,'filename=')"/>
-    <xsl:variable name="filename"
-                  select="substring-before(substring($pi-value,2),'.html')"/>
-    <xsl:processing-instruction name="dbhtml">filename="<xsl:copy-of
-                select="$filename"/>-pass1.html"</xsl:processing-instruction>
-  </xsl:template>
-
-  <xsl:template match="processing-instruction()" mode="sect1">
-    <xsl:copy-of select="."/>
-  </xsl:template>
-
-<!-- Any node which has no xref descendant is copied verbatim. If there
-     is an xref descendant, output the node and recurse. -->
-  <xsl:template match="*" mode="sect1">
-    <xsl:choose>
-      <xsl:when test="self::xref">
-        <xsl:choose>
-          <xsl:when test="contains(concat(' ',normalize-space($list),' '),
-                                   concat(' ',@linkend,' '))">
-            <xsl:choose>
-              <xsl:when test="@linkend='x-window-system' or @linkend='xorg7'">
-                <xref linkend="xorg7-server"/>
-              </xsl:when>
-              <xsl:when test="@linkend='server-mail'">
-                <xref linkend="{$MTA}"/>
-              </xsl:when>
-              <xsl:otherwise>
-                <xsl:copy-of select="."/>
-              </xsl:otherwise>
-            </xsl:choose>
-          </xsl:when>
-          <xsl:otherwise>
-            <xsl:choose>
-              <xsl:when test="@linkend='bootscripts' or
-                              @linkend='systemd-units'">
-                <xsl:copy-of select="."/>
-              </xsl:when>
-              <xsl:otherwise>
-                <xsl:value-of select="@linkend"/> (in full book)
-              </xsl:otherwise>
-            </xsl:choose>
-          </xsl:otherwise>
-        </xsl:choose>
-      </xsl:when>
-      <xsl:when test=".//xref">
-        <xsl:element name="{name()}">
-          <xsl:for-each select="attribute::*">
-            <xsl:attribute name="{name()}">
-              <xsl:value-of select="."/>
-            </xsl:attribute>
-          </xsl:for-each>
-          <xsl:apply-templates mode="sect1"/>
-        </xsl:element>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:copy-of select="."/>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-
-<!-- Python modules and DBus bindings -->
-  <xsl:template match="sect2">
-    <xsl:apply-templates select='.' mode="sect2"/>
-  </xsl:template>
-
-  <xsl:template match="*" mode="sect2">
-    <xsl:choose>
-      <xsl:when test="self::sect2">
-        <xsl:element name="sect1">
-          <xsl:attribute name="id"><xsl:value-of select="@id"/></xsl:attribute>
-          <xsl:attribute name="xreflabel"><xsl:value-of select="@xreflabel"/></xsl:attribute>
-          <xsl:processing-instruction name="dbhtml">filename="<xsl:value-of
-                          select="@id"/>.html"</xsl:processing-instruction>
-          <xsl:apply-templates mode="sect2"/>
-        </xsl:element>
-      </xsl:when>
-      <xsl:when test="self::sect3">
-        <xsl:element name="sect2">
-          <xsl:attribute name="role">
-            <xsl:value-of select="@role"/>
-          </xsl:attribute>
-          <xsl:apply-templates mode="sect2"/>
-        </xsl:element>
-      </xsl:when>
-      <xsl:when test="self::bridgehead">
-        <xsl:element name="bridgehead">
-          <xsl:attribute name="renderas">
-            <xsl:if test="@renderas='sect4'">sect3</xsl:if>
-            <xsl:if test="@renderas='sect5'">sect4</xsl:if>
-          </xsl:attribute>
-          <xsl:value-of select='.'/>
-        </xsl:element>
-      </xsl:when>
-      <xsl:when test="self::xref">
-        <xsl:choose>
-          <xsl:when test="contains(concat(' ',normalize-space($list),' '),
-                                   concat(' ',@linkend,' '))">
-            <xsl:choose>
-              <xsl:when test="@linkend='x-window-system' or @linkend='xorg7'">
-                <xref linkend="xorg7-server"/>
-              </xsl:when>
-              <xsl:when test="@linkend='server-mail'">
-                <xref linkend="{$MTA}"/>
-              </xsl:when>
-              <xsl:otherwise>
-                <xsl:copy-of select="."/>
-              </xsl:otherwise>
-            </xsl:choose>
-          </xsl:when>
-          <xsl:otherwise>
-            <xsl:value-of select="@linkend"/> (in full book)
-          </xsl:otherwise>
-        </xsl:choose>
-      </xsl:when>
-      <xsl:when test=".//xref">
-        <xsl:element name="{name()}">
-          <xsl:for-each select="attribute::*">
-            <xsl:attribute name="{name()}">
-              <xsl:value-of select="."/>
-            </xsl:attribute>
-          </xsl:for-each>
-          <xsl:apply-templates mode="sect2"/>
-        </xsl:element>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:copy-of select="."/>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-
-<!-- Perl modules : transform them to minimal sect1. Use a template
-     for installation instructions -->
-  <xsl:template match="bridgehead">
-  <xsl:if test="ancestor::sect1[@id='perl-modules']">
-    <xsl:element name="sect1">
-      <xsl:attribute name="id"><xsl:value-of select="./@id"/></xsl:attribute>
-      <xsl:attribute name="xreflabel"><xsl:value-of select="./@xreflabel"/></xsl:attribute>
-      <xsl:processing-instruction name="dbhtml">
-     filename="<xsl:value-of select="@id"/>.html"</xsl:processing-instruction>
-      <title><xsl:value-of select="./@xreflabel"/></title>
-      <sect2 role="package">
-        <title>Introduction to <xsl:value-of select="@id"/></title>
-        <bridgehead renderas="sect3">Package Information</bridgehead>
-        <itemizedlist spacing="compact">
-          <listitem>
-            <para>Download (HTTP): <xsl:copy-of select="./following-sibling::itemizedlist[1]/listitem/para/ulink"/></para>
-          </listitem>
-          <listitem>
-            <para>Download (FTP): <ulink url=" "/></para>
-          </listitem>
-        </itemizedlist>
-      </sect2>
-      <xsl:choose>
-        <xsl:when test="following-sibling::itemizedlist[1]//xref[@linkend='perl-standard-install'] | following-sibling::itemizedlist[1]/preceding-sibling::para//xref[@linkend='perl-standard-install']">
-          <xsl:apply-templates mode="perl-install"  select="id('perl-standard-install')"/>
-        </xsl:when>
-        <xsl:otherwise>
-          <sect2 role="installation">
-            <title>Installation of <xsl:value-of select="@xreflabel"/></title>
-            <para>Run the following commands:</para>
-            <for-each select="following-sibling::bridgehead/preceding-sibling::screen[not(@role)]">
-              <xsl:copy-of select="."/>
-            </for-each>
-            <para>Now, as the <systemitem class="username">root</systemitem> user:</para>
-            <for-each select="following-sibling::bridgehead/preceding-sibling::screen[@role='root']">
-              <xsl:copy-of select="."/>
-            </for-each>
-          </sect2>
-        </xsl:otherwise>
-      </xsl:choose>
-    </xsl:element>
-  </xsl:if>
-  </xsl:template>
-
-<!-- The case of depdendencies of perl modules. Same treatment
-     as for perl modules. Just easier because always perl standard -->
-  <xsl:template match="para">
-    <xsl:element name="sect1">
-      <xsl:attribute name="id"><xsl:value-of select="./@id"/></xsl:attribute>
-      <xsl:attribute name="xreflabel"><xsl:value-of select="./@xreflabel"/></xsl:attribute>
-      <xsl:processing-instruction name="dbhtml">filename="<xsl:value-of
-     select="@id"/>.html"</xsl:processing-instruction>
-      <title><xsl:value-of select="./@xreflabel"/></title>
-      <sect2 role="package">
-        <title>Introduction to <xsl:value-of select="@id"/></title>
-        <bridgehead renderas="sect3">Package Information</bridgehead>
-        <itemizedlist spacing="compact">
-          <listitem>
-            <para>Download (HTTP): <xsl:copy-of select="./ulink"/></para>
-          </listitem>
-          <listitem>
-            <para>Download (FTP): <ulink url=" "/></para>
-          </listitem>
-        </itemizedlist>
-      </sect2>
-      <xsl:apply-templates mode="perl-install"  select="id('perl-standard-install')"/>
-    </xsl:element>
-  </xsl:template>
-
-<!-- copy of the perl standard installation instructions:
-     suppress id (otherwise not unique) and note (which we
-     do not want to apply -->
-  <xsl:template match="sect2" mode="perl-install">
-    <sect2 role="installation">
-      <xsl:for-each select="./*">
-        <xsl:if test="not(self::note)">
-          <xsl:copy-of select="."/>
-        </xsl:if>
-      </xsl:for-each>
-    </sect2>
-  </xsl:template>
-
-<!-- we have got an xorg package. We are at the installation page
-     but now we need to make an autonomous page from the global
-     one -->
-  <xsl:template match="sect1" mode="xorg">
-    <xsl:param name="package"/>
-    <xsl:variable name="tarball">
-      <xsl:call-template name="tarball">
-        <xsl:with-param name="package" select="concat(' ',$package,'-')"/>
-        <xsl:with-param name="cat-md5"
-                        select="string(.//userinput[starts-with(string(),'cat ')])"/>
-      </xsl:call-template>
-    </xsl:variable>
-    <xsl:variable name="md5sum">
-      <xsl:call-template name="md5sum">
-        <xsl:with-param name="package" select="concat(' ',$package,'-')"/>
-        <xsl:with-param name="cat-md5"
-                        select=".//userinput[starts-with(string(),'cat ')]"/>
-      </xsl:call-template>
-    </xsl:variable>
-    <xsl:variable name="download-dir">
-      <xsl:call-template name="download-dir">
-        <xsl:with-param name="package" select="concat(' ',$package,'-')"/>
-        <xsl:with-param name="cat-md5"
-                        select=".//userinput[starts-with(string(),'cat ')]"/>
-      </xsl:call-template>
-    </xsl:variable>
-    <xsl:variable name="install-instructions">
-      <xsl:call-template name="inst-instr">
-        <xsl:with-param name="inst-instr"
-                        select=".//userinput[starts-with(string(),'for ')]"/>
-      </xsl:call-template>
-    </xsl:variable>
-    <xsl:element name="sect1">
-      <xsl:attribute name="id"><xsl:value-of select="$package"/></xsl:attribute>
-      <xsl:processing-instruction name="dbhtml">
-         filename="<xsl:value-of select='$package'/>.html"
-      </xsl:processing-instruction>
-      <title><xsl:value-of select="$package"/></title>
-      <sect2 role="package">
-        <title>Introduction to <xsl:value-of select="$package"/></title>
-        <bridgehead renderas="sect3">Package Information</bridgehead>
-        <itemizedlist spacing="compact">
-          <listitem>
-            <para>Download (HTTP): <xsl:element name="ulink">
-              <xsl:attribute name="url">
-                <xsl:value-of
-                   select=".//para[contains(string(),'(HTTP)')]/ulink/@url"/>
-                <xsl:value-of select="$download-dir"/>
-                <xsl:value-of select="$tarball"/>
-              </xsl:attribute>
-             </xsl:element>
-            </para>
-          </listitem>
-          <listitem>
-            <para>Download (FTP): <xsl:element name="ulink">
-              <xsl:attribute name="url">
-                <xsl:value-of
-                   select=".//para[contains(string(),'(FTP)')]/ulink/@url"/>
-                <xsl:value-of select="$download-dir"/>
-                <xsl:value-of select="$tarball"/>
-              </xsl:attribute>
-             </xsl:element>
-            </para>
-          </listitem>
-          <listitem>
-            <para>
-              Download MD5 sum: <xsl:value-of select="$md5sum"/>
-            </para>
-          </listitem>
-        </itemizedlist>
-        <!-- If there is an additional download, we need to output that -->
-        <xsl:if test=".//bridgehead[contains(string(),'Additional')]">
-          <xsl:copy-of
-                 select=".//bridgehead[contains(string(),'Additional')]"/>
-          <xsl:copy-of
-                 select=".//bridgehead[contains(string(),'Additional')]
-                         /following-sibling::itemizedlist[1]"/>
-        </xsl:if>
-      </sect2>
-      <sect2 role="installation">
-        <title>Installation of <xsl:value-of select="$package"/></title>
-
-        <para>
-          Install <application><xsl:value-of select="$package"/></application>
-          by running the following commands:
-        </para>
-
-        <screen><userinput>packagedir=<xsl:value-of
-                    select="substring-before($tarball,'.tar.')"/>
-          <xsl:text>&#xA;</xsl:text>
-          <xsl:value-of select="substring-before($install-instructions,
-                                                 'as_root')"/>
-        </userinput></screen>
-
-        <para>
-          Now as the <systemitem class="username">root</systemitem> user:
-        </para>
-        <screen role='root'>
-          <userinput><xsl:value-of select="substring-after(
-                                                 $install-instructions,
-                                                 'as_root')"/>
-          </userinput>
-        </screen>
-      </sect2>
-    </xsl:element><!-- sect1 -->
-
-  </xsl:template>
-
-<!-- get the tarball name from the text that comes from the .md5 file -->
-  <xsl:template name="tarball">
-    <xsl:param name="package"/>
-    <xsl:param name="cat-md5"/>
-<!-- DEBUG
-<xsl:message><xsl:text>Entering "tarball" template:
-  package is: </xsl:text>
-<xsl:value-of select="$package"/><xsl:text>
-  cat-md5 is: </xsl:text>
-<xsl:value-of select="$cat-md5"/>
-</xsl:message>
-END DEBUG -->
-    <xsl:choose>
-      <xsl:when test="contains(substring-before($cat-md5,$package),'&#xA;')">
-        <xsl:call-template name="tarball">
-          <xsl:with-param name="package" select="$package"/>
-          <xsl:with-param name="cat-md5"
-                          select="substring-after($cat-md5,'&#xA;')"/>
-        </xsl:call-template>
-      </xsl:when>
-      <xsl:when test="contains(substring-before($cat-md5,$package),' ')">
-        <xsl:call-template name="tarball">
-          <xsl:with-param name="package" select="$package"/>
-          <xsl:with-param name="cat-md5"
-                          select="substring-after($cat-md5,' ')"/>
-        </xsl:call-template>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:copy-of select="substring-after(
-                                substring-before($cat-md5,'&#xA;'),' ')"/>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-<!-- get the download dirname from the text that comes from the .md5 file -->
-  <xsl:template name="download-dir">
-    <xsl:param name="package"/>
-    <xsl:param name="cat-md5"/>
-    <xsl:choose>
-      <xsl:when test="not(@id='xorg7-legacy')">
-        <xsl:copy-of select="''"/>
-      </xsl:when>
-      <xsl:when test="contains(substring-before($cat-md5,$package),'&#xA;')">
-        <xsl:call-template name="download-dir">
-          <xsl:with-param name="package" select="$package"/>
-          <xsl:with-param name="cat-md5"
-                          select="substring-after($cat-md5,'&#xA;')"/>
-        </xsl:call-template>
-      </xsl:when>
-      <xsl:when test="contains(substring-before($cat-md5,$package),' ')">
-        <xsl:call-template name="download-dir">
-          <xsl:with-param name="package" select="$package"/>
-          <xsl:with-param name="cat-md5"
-                          select="substring-after($cat-md5,' ')"/>
-        </xsl:call-template>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:copy-of select="substring-before($cat-md5,' ')"/>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-<!-- same for md5sum -->
-  <xsl:template name="md5sum">
-    <xsl:param name="package"/>
-    <xsl:param name="cat-md5"/>
-    <xsl:choose>
-      <xsl:when test="contains(substring-before($cat-md5,$package),'&#xA;')">
-        <xsl:call-template name="md5sum">
-          <xsl:with-param name="package" select="$package"/>
-          <xsl:with-param name="cat-md5"
-                          select="substring-after($cat-md5,'&#xA;')"/>
-        </xsl:call-template>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:copy-of select="substring-before($cat-md5,'  ')"/>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-
-  <xsl:template name="inst-instr">
-    <xsl:param name="inst-instr"/>
-    <xsl:choose>
-      <xsl:when test="contains($inst-instr,'pushd')">
-        <xsl:call-template name="inst-instr">
-          <xsl:with-param name="inst-instr"
-                          select="substring-after(
-                                   substring-after($inst-instr,'pushd'),
-                                   '&#xA;')"/>
-        </xsl:call-template>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:copy-of select="substring-before($inst-instr,'popd')"/>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-</xsl:stylesheet>

BLFS/xsl/process-install.xsl

@@ -1,583 +0,0 @@
-<?xml version="1.0" encoding="ISO-8859-1"?>
-<!DOCTYPE stylesheet [
-<!ENTITY detect-config
-        "contains(string($current-instr),'useradd') or
-         contains(string($current-instr),'groupadd') or
-         contains(string($current-instr),'usermod') or
-         contains(string($current-instr),'icon-cache') or
-         contains(string($current-instr),'desktop-database') or
-         contains(string($current-instr),'compile-schemas') or
-         contains(string($current-instr),'query-loaders') or
-         contains(string($current-instr),'pam.d') or
-         contains(string($current-instr),'/opt/rustc') or
-         contains(string($current-instr),'libQt5WebEngine') or
-         contains(string($current-instr),'desktop-file-edit') or
-         contains(string($current-instr),'.old') or
-         contains(string($current-instr),'tracker-miner') or
-         contains(string($current-instr),'gtweak') or
-         contains(string($current-instr),'query-immodules') or
-         contains(string($current-instr),'chgrp -v mail') or
-         contains(string($current-instr),'gnome-control-center')">
-]>
-
-<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-    version="1.0">
-
-  <xsl:template name="process-install">
-    <xsl:param name="instruction-tree"/>
-    <xsl:param name="want-stats"/>
-    <xsl:param name="root-seen"/>
-    <xsl:param name="install-seen"/>
-    <xsl:param name="test-seen"/>
-    <xsl:param name="doc-seen"/>
-
-<!-- Isolate the current instruction -->
-    <xsl:variable name="current-instr" select="$instruction-tree[1]"/>
-
-    <xsl:choose>
-<!--============================================================-->
-<!-- First, if we have an empty tree, close everything and exit -->
-      <xsl:when test="not($current-instr)">
-        <xsl:if test="$install-seen">
-          <xsl:call-template name="end-install"/>
-        </xsl:if>
-        <xsl:if test="$root-seen">
-          <xsl:call-template name="end-root"/>
-        </xsl:if>
-        <xsl:if test="$doc-seen and not($root-seen)">
-          <xsl:call-template name="end-doc">
-            <xsl:with-param name="want-stats" select="$want-stats"/>
-          </xsl:call-template>
-        </xsl:if>
-        <xsl:if test="$test-seen">
-          <xsl:call-template name="end-test">
-            <xsl:with-param name="want-stats" select="$want-stats"/>
-          </xsl:call-template>
-        </xsl:if>
-      </xsl:when><!-- end empty tree -->
-<!--============================================================-->
-      <xsl:when test="$current-instr[@role='root' and @remap='test']">
-        <xsl:if test="$install-seen">
-          <xsl:call-template name="end-install"/>
-        </xsl:if>
-        <xsl:if test="$root-seen">
-          <xsl:call-template name="end-root"/>
-        </xsl:if>
-        <xsl:if test="$doc-seen and not($root-seen)">
-          <xsl:call-template name="end-doc">
-            <xsl:with-param name="want-stats" select="$want-stats"/>
-          </xsl:call-template>
-        </xsl:if>
-        <xsl:if test="not($test-seen)">
-          <xsl:call-template name="begin-test">
-            <xsl:with-param name="want-stats" select="$want-stats"/>
-          </xsl:call-template>
-        </xsl:if>
-        <xsl:call-template name="begin-root"/>
-<!-- We first apply mode="root" templates, and save the result in a variable -->
-        <xsl:variable name="processed-instr">
-          <xsl:apply-templates select="$current-instr" mode="root"/>
-        </xsl:variable>
-<!-- We then process as a test instruction -->
-        <xsl:call-template name="process-test">
-          <xsl:with-param name="test-instr" select="$processed-instr"/>
-          <xsl:with-param name="want-stats" select="$want-stats"/>
-        </xsl:call-template>
-        <xsl:call-template name="process-install">
-          <xsl:with-param
-             name="instruction-tree"
-             select="$instruction-tree[position()>1]"/>
-          <xsl:with-param name="want-stats" select="$want-stats"/>
-          <xsl:with-param name="root-seen" select="boolean(1)"/>
-          <xsl:with-param name="install-seen" select="boolean(0)"/>
-          <xsl:with-param name="test-seen" select="boolean(1)"/>
-          <xsl:with-param name="doc-seen" select="boolean(0)"/>
-        </xsl:call-template>
-      </xsl:when><!-- end role="root" and remap="test" -->
-<!--============================================================-->
-      <xsl:when test="$current-instr[@role='root' and @remap='doc']">
-        <xsl:if test="$test-seen">
-          <xsl:call-template name="end-test">
-            <xsl:with-param name="want-stats" select="$want-stats"/>
-          </xsl:call-template>
-        </xsl:if>
-        <xsl:if test="$doc-seen and not($root-seen)">
-          <xsl:call-template name="end-doc">
-            <xsl:with-param name="want-stats" select="$want-stats"/>
-          </xsl:call-template>
-        </xsl:if>
-        <xsl:if test="not($root-seen)">
-          <xsl:call-template name="begin-root"/>
-        </xsl:if>
-        <xsl:if test="not($install-seen)">
-          <xsl:call-template name="begin-install"/>
-        </xsl:if>
-<!-- We first apply mode="install" templates, and save the result in a
-     variable -->
-        <xsl:variable name="processed-instr">
-          <xsl:apply-templates select="$current-instr" mode="install"/>
-        </xsl:variable>
-<!-- Then comment it out -->
-        <xsl:call-template name="output-comment-out">
-          <xsl:with-param name="out-string" select="$processed-instr"/>
-        </xsl:call-template>
-<!-- The above template ends with a commented line, so that if end-install
-     adds a closing single quote, it will not be seen. Add a CR to prevent
-     that -->
-        <xsl:text>
-</xsl:text>
-        <xsl:call-template name="process-install">
-          <xsl:with-param
-             name="instruction-tree"
-             select="$instruction-tree[position()>1]"/>
-          <xsl:with-param name="want-stats" select="$want-stats"/>
-          <xsl:with-param name="root-seen" select="boolean(1)"/>
-          <xsl:with-param name="install-seen" select="boolean(1)"/>
-          <xsl:with-param name="test-seen" select="boolean(0)"/>
-          <xsl:with-param name="doc-seen" select="boolean(1)"/>
-        </xsl:call-template>
-      </xsl:when><!-- end role="root" and remap="doc" -->
-<!--============================================================-->
-      <xsl:when test="$current-instr[@role='root']">
-<!-- We have two cases, depending on the content: either a config instruction,
-     that we do not record with porg (first case below), or a true install
-     instruction (otherwise below) -->
-        <xsl:choose>
-<!--____________________________________________________________ -->
-          <xsl:when test="&detect-config;">
-            <xsl:if test="$install-seen">
-              <xsl:call-template name="end-install"/>
-            </xsl:if>
-            <xsl:if test="$test-seen">
-              <xsl:call-template name="end-test">
-                <xsl:with-param name="want-stats" select="$want-stats"/>
-              </xsl:call-template>
-            </xsl:if>
-            <xsl:if test="$doc-seen and not($root-seen)">
-              <xsl:call-template name="end-doc">
-                <xsl:with-param name="want-stats" select="$want-stats"/>
-              </xsl:call-template>
-            </xsl:if>
-            <xsl:if test="not($root-seen)">
-              <xsl:call-template name="begin-root"/>
-            </xsl:if>
-            <xsl:apply-templates select="$current-instr" mode="root"/>
-            <xsl:call-template name="process-install">
-              <xsl:with-param
-                 name="instruction-tree"
-                 select="$instruction-tree[position()>1]"/>
-              <xsl:with-param name="want-stats" select="$want-stats"/>
-              <xsl:with-param name="root-seen" select="boolean(1)"/>
-              <xsl:with-param name="install-seen" select="boolean(0)"/>
-              <xsl:with-param name="test-seen" select="boolean(0)"/>
-              <xsl:with-param name="doc-seen" select="boolean(0)"/>
-            </xsl:call-template>
-          </xsl:when><!-- end config as root -->
-<!--____________________________________________________________ -->
-          <xsl:otherwise><!-- we have a true install instruction -->
-            <xsl:if test="$test-seen">
-              <xsl:call-template name="end-test">
-                <xsl:with-param name="want-stats" select="$want-stats"/>
-              </xsl:call-template>
-            </xsl:if>
-            <xsl:if test="$doc-seen and not($root-seen)">
-              <xsl:call-template name="end-doc">
-                <xsl:with-param name="want-stats" select="$want-stats"/>
-              </xsl:call-template>
-            </xsl:if>
-            <xsl:if test="$want-stats and not($install-seen)">
-              <xsl:if test="$root-seen">
-                <xsl:call-template name="end-root"/>
-              </xsl:if>
-              <xsl:text>
-echo Time before install: ${SECONDS} >> $INFOLOG</xsl:text>
-              <xsl:apply-templates
-                         select="$instruction-tree[@role='root']/userinput"
-                         mode="destdir"/>
-              <xsl:text>
-
-echo Time after install: ${SECONDS} >> $INFOLOG
-echo Size after install: $(sudo du -skx --exclude home $BUILD_DIR) >> $INFOLOG
-</xsl:text>
-              <xsl:if test="$root-seen">
-                <xsl:call-template name="begin-root"/>
-              </xsl:if>
-            </xsl:if>
-            <xsl:if test="not($root-seen)">
-              <xsl:call-template name="begin-root"/>
-            </xsl:if>
-            <xsl:if test="not($install-seen)">
-              <xsl:call-template name="begin-install"/>
-            </xsl:if>
-            <xsl:apply-templates select="$current-instr" mode="install"/>
-            <xsl:call-template name="process-install">
-              <xsl:with-param
-                 name="instruction-tree"
-                 select="$instruction-tree[position()>1]"/>
-              <xsl:with-param name="want-stats" select="$want-stats"/>
-              <xsl:with-param name="root-seen" select="boolean(1)"/>
-              <xsl:with-param name="install-seen" select="boolean(1)"/>
-              <xsl:with-param name="test-seen" select="boolean(0)"/>
-              <xsl:with-param name="doc-seen" select="boolean(0)"/>
-            </xsl:call-template>
-          </xsl:otherwise><!-- end true install instruction -->
-<!--____________________________________________________________ -->
-        </xsl:choose>
-      </xsl:when><!-- role="root" and no remap -->
-<!--============================================================-->
-      <xsl:when test="$current-instr[@remap='test'] or
-                      $current-instr/self::command">
-        <xsl:if test="$install-seen">
-          <xsl:call-template name="end-install"/>
-        </xsl:if>
-        <xsl:if test="$root-seen">
-          <xsl:call-template name="end-root"/>
-        </xsl:if>
-        <xsl:if test="$doc-seen and not($root-seen)">
-          <xsl:call-template name="end-doc">
-            <xsl:with-param name="want-stats" select="$want-stats"/>
-          </xsl:call-template>
-        </xsl:if>
-        <xsl:if test="not($test-seen)">
-          <xsl:if test="not($doc-seen)">
-            <xsl:call-template name="end-make">
-              <xsl:with-param name="want-stats" select="$want-stats"/>
-            </xsl:call-template>
-          </xsl:if>
-          <xsl:call-template name="begin-test">
-            <xsl:with-param name="want-stats" select="$want-stats"/>
-          </xsl:call-template>
-        </xsl:if>
-<!-- We first apply normal templates, and save the result in a variable -->
-        <xsl:variable name="processed-instr">
-          <xsl:apply-templates select="$current-instr"/>
-        </xsl:variable>
-<!-- We then process as a test instruction -->
-        <xsl:call-template name="process-test">
-          <xsl:with-param name="test-instr" select="$processed-instr"/>
-          <xsl:with-param name="want-stats" select="$want-stats"/>
-        </xsl:call-template>
-        <xsl:call-template name="process-install">
-          <xsl:with-param
-             name="instruction-tree"
-             select="$instruction-tree[position()>1]"/>
-          <xsl:with-param name="want-stats" select="$want-stats"/>
-          <xsl:with-param name="root-seen" select="boolean(0)"/>
-          <xsl:with-param name="install-seen" select="boolean(0)"/>
-          <xsl:with-param name="test-seen" select="boolean(1)"/>
-          <xsl:with-param name="doc-seen" select="boolean(0)"/>
-        </xsl:call-template>
-      </xsl:when><!-- end no role, remap=test -->
-<!--============================================================-->
-      <xsl:when test="$current-instr[@remap='doc']">
-        <xsl:if test="$install-seen">
-          <xsl:call-template name="end-install"/>
-        </xsl:if>
-        <xsl:if test="$root-seen">
-          <xsl:call-template name="end-root"/>
-        </xsl:if>
-        <xsl:if test="$test-seen">
-          <xsl:call-template name="end-test">
-            <xsl:with-param name="want-stats" select="$want-stats"/>
-          </xsl:call-template>
-        </xsl:if>
-        <xsl:if test="not($doc-seen) or $root-seen">
-          <xsl:if test="not($test-seen) and not($root-seen)">
-            <xsl:call-template name="end-make">
-              <xsl:with-param name="want-stats" select="$want-stats"/>
-            </xsl:call-template>
-          </xsl:if>
-          <xsl:call-template name="begin-doc">
-            <xsl:with-param name="want-stats" select="$want-stats"/>
-          </xsl:call-template>
-        </xsl:if>
-<!-- We first apply normal templates, and save the result in a variable -->
-        <xsl:variable name="processed-instr">
-          <xsl:apply-templates select="$current-instr"/>
-        </xsl:variable>
-<!-- We then process as a doc instruction -->
-        <xsl:call-template name="process-doc">
-          <xsl:with-param name="doc-instr" select="$processed-instr"/>
-          <xsl:with-param name="want-stats" select="$want-stats"/>
-        </xsl:call-template>
-        <xsl:call-template name="process-install">
-          <xsl:with-param
-             name="instruction-tree"
-             select="$instruction-tree[position()>1]"/>
-          <xsl:with-param name="want-stats" select="$want-stats"/>
-          <xsl:with-param name="root-seen" select="boolean(0)"/>
-          <xsl:with-param name="install-seen" select="boolean(0)"/>
-          <xsl:with-param name="test-seen" select="boolean(0)"/>
-          <xsl:with-param name="doc-seen" select="boolean(1)"/>
-        </xsl:call-template>
-      </xsl:when><!-- no role, remap="doc" -->
-<!--============================================================-->
-      <xsl:otherwise><!-- no role no remap -->
-        <xsl:if test="$install-seen">
-          <xsl:call-template name="end-install"/>
-        </xsl:if>
-        <xsl:if test="$root-seen">
-          <xsl:call-template name="end-root"/>
-        </xsl:if>
-        <xsl:if test="$doc-seen and not($root-seen)">
-          <xsl:call-template name="end-doc">
-            <xsl:with-param name="want-stats" select="$want-stats"/>
-          </xsl:call-template>
-        </xsl:if>
-        <xsl:if test="$test-seen">
-          <xsl:call-template name="end-test">
-            <xsl:with-param name="want-stats" select="$want-stats"/>
-          </xsl:call-template>
-        </xsl:if>
-        <xsl:apply-templates select="$current-instr"/>
-        <xsl:call-template name="process-install">
-          <xsl:with-param
-             name="instruction-tree"
-             select="$instruction-tree[position()>1]"/>
-          <xsl:with-param name="want-stats" select="$want-stats"/>
-          <xsl:with-param name="root-seen" select="boolean(0)"/>
-          <xsl:with-param name="install-seen" select="boolean(0)"/>
-          <xsl:with-param name="test-seen" select="boolean(0)"/>
-          <xsl:with-param name="doc-seen" select="boolean(0)"/>
-        </xsl:call-template>
-      </xsl:otherwise><!-- no role, no remap -->
-<!--============================================================-->
-    </xsl:choose>
-  </xsl:template>
-
-  <xsl:template match="userinput" mode="install">
-    <xsl:text>
-</xsl:text>
-    <xsl:call-template name="output-install">
-      <xsl:with-param name="out-string" select="string()"/>
-    </xsl:call-template>
-  </xsl:template>
-
-<!-- userinput templates for mode="root" and normal are in scripts.xsl -->
-
-  <xsl:template name="process-test">
-    <xsl:param name="test-instr"/>
-    <xsl:param name="want-stats"/>
-    <xsl:choose>
-      <!-- the string may begin with a linefeed -->
-      <xsl:when test="substring($test-instr,1,1)='&#xA;'">
-        <xsl:text>
-</xsl:text>
-        <xsl:call-template name="process-test">
-          <xsl:with-param name="test-instr"
-                          select="substring-after($test-instr,'&#xA;')"/>
-          <xsl:with-param name="want-stats" select="$want-stats"/>
-        </xsl:call-template>
-      </xsl:when>
-      <xsl:when test="contains($test-instr,'&#xA;')">
-        <xsl:call-template name="process-test">
-          <xsl:with-param name="test-instr"
-                          select="substring-before($test-instr,'&#xA;')"/>
-          <xsl:with-param name="want-stats" select="$want-stats"/>
-        </xsl:call-template>
-        <xsl:text>
-</xsl:text>
-        <xsl:call-template name="process-test">
-          <xsl:with-param name="test-instr"
-                          select="substring-after($test-instr,'&#xA;')"/>
-          <xsl:with-param name="want-stats" select="$want-stats"/>
-        </xsl:call-template>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:if test="not($want-stats)">
-          <xsl:text>#</xsl:text>
-        </xsl:if>
-        <xsl:choose>
-          <xsl:when test="contains($test-instr,'make')
-                  and not(contains($test-instr,'make -k'))">
-            <xsl:copy-of select="substring-before($test-instr,'make')"/>
-            <xsl:text>make -k</xsl:text>
-            <xsl:copy-of select="substring-after($test-instr,'make')"/>
-          </xsl:when>
-          <xsl:otherwise>
-            <xsl:copy-of select="$test-instr"/>
-          </xsl:otherwise>
-        </xsl:choose>
-        <xsl:if test="substring($test-instr,
-                                string-length($test-instr),
-                                1)!='\'">
-          <xsl:if test="$want-stats">
-            <xsl:text> &gt;&gt; $TESTLOG 2>&amp;1</xsl:text>
-          </xsl:if>
-          <xsl:text> || true</xsl:text>
-        </xsl:if>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-
-  <xsl:template name="process-doc">
-    <xsl:param name="doc-instr"/>
-    <xsl:param name="want-stats"/>
-    <xsl:choose>
-      <xsl:when test="$want-stats">
-        <xsl:copy-of select="$doc-instr"/>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:call-template name="output-comment-out">
-          <xsl:with-param name="out-string" select="$doc-instr"/>
-        </xsl:call-template>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-
-  <xsl:template name="output-comment-out">
-<!-- Output instructions with each line commented out. -->
-    <xsl:param name="out-string"/>
-    <xsl:choose>
-      <!-- the string may begin with a linefeed -->
-      <xsl:when test="substring($out-string,1,1)='&#xA;'">
-        <xsl:text>
-</xsl:text>
-        <xsl:call-template name="output-comment-out">
-          <xsl:with-param name="out-string"
-                          select="substring-after($out-string,'&#xA;')"/>
-        </xsl:call-template>
-      </xsl:when>
-      <xsl:when test="contains($out-string,'&#xA;')">
-        <xsl:text>#</xsl:text>
-        <xsl:copy-of select="substring-before($out-string,'&#xA;')"/>
-        <xsl:text>
-</xsl:text>
-        <xsl:call-template name="output-comment-out">
-          <xsl:with-param name="out-string"
-                          select="substring-after($out-string,'&#xA;')"/>
-        </xsl:call-template>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:text>#</xsl:text>
-        <xsl:copy-of select="$out-string"/>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-
-  <xsl:template name="end-make">
-    <xsl:param name="want-stats"/>
-    <xsl:if test="$want-stats">
-      <xsl:text>
-
-echo Time after make: ${SECONDS} >> $INFOLOG
-echo Size after make: $(sudo du -skx --exclude home $BUILD_DIR) >> $INFOLOG</xsl:text>
-    </xsl:if>
-  </xsl:template>
-
-  <xsl:template name="begin-doc">
-    <xsl:param name="want-stats"/>
-    <xsl:if test="$want-stats">
-      <xsl:text>
-echo Time before doc: ${SECONDS} >> $INFOLOG
-</xsl:text>
-    </xsl:if>
-  </xsl:template>
-
-  <xsl:template name="begin-test">
-    <xsl:param name="want-stats"/>
-    <xsl:if test="$want-stats">
-      <xsl:text>
-echo Time before test: ${SECONDS} >> $INFOLOG
-</xsl:text>
-    </xsl:if>
-  </xsl:template>
-
-  <xsl:template name="begin-root">
-    <xsl:if test="$sudo='y'">
-      <xsl:text>
-sudo -E sh -e &lt;&lt; ROOT_EOF
-PATH=$PATH:/usr/sbin</xsl:text>
-    </xsl:if>
-  </xsl:template>
-
-  <xsl:template name="begin-install">
-    <xsl:if test="$wrap-install = 'y'">
-      <xsl:text>
-if [ -r "$JH_PACK_INSTALL" ]; then
-  source $JH_PACK_INSTALL
-  export -f wrapInstall
-  export -f packInstall
-fi
-wrapInstall '</xsl:text>
-    </xsl:if>
-  </xsl:template>
-
-  <xsl:template name="end-doc">
-    <xsl:param name="want-stats"/>
-    <xsl:if test="$want-stats">
-      <xsl:text>
-
-echo Time after doc: ${SECONDS} >> $INFOLOG
-echo Size after doc: $(sudo du -skx --exclude home $BUILD_DIR) >> $INFOLOG</xsl:text>
-    </xsl:if>
-  </xsl:template>
-
-  <xsl:template name="end-test">
-    <xsl:param name="want-stats"/>
-    <xsl:if test="$want-stats">
-      <xsl:text>
-
-echo Time after test: ${SECONDS} >> $INFOLOG
-echo Size after test: $(sudo du -skx --exclude home $BUILD_DIR) >> $INFOLOG</xsl:text>
-    </xsl:if>
-  </xsl:template>
-
-  <xsl:template name="end-root">
-    <xsl:if test="$sudo='y'">
-      <xsl:text>
-ROOT_EOF</xsl:text>
-    </xsl:if>
-  </xsl:template>
-
-  <xsl:template name="end-install">
-    <xsl:if test="$del-la-files = 'y'">
-      <xsl:call-template name="output-root">
-        <xsl:with-param name="out-string" select="$la-files-instr"/>
-      </xsl:call-template>
-    </xsl:if>
-    <xsl:if test="$wrap-install = 'y'">
-      <xsl:text>'&#xA;packInstall</xsl:text>
-    </xsl:if>
-  </xsl:template>
-
-  <xsl:template name="output-install">
-    <xsl:param name="out-string" select="''"/>
-    <xsl:choose>
-      <xsl:when test="starts-with($out-string, 'make ') or
-                      contains($out-string,' make ') or
-                      contains($out-string,'&#xA;make')">
-        <xsl:call-template name="output-install">
-          <xsl:with-param
-               name="out-string"
-               select="substring-before($out-string,'make ')"/>
-        </xsl:call-template>
-        <xsl:text>make -j1 </xsl:text>
-        <xsl:call-template name="output-install">
-          <xsl:with-param
-               name="out-string"
-               select="substring-after($out-string,'make ')"/>
-        </xsl:call-template>
-      </xsl:when>
-      <xsl:when test="contains($out-string,string($APOS))
-                      and $wrap-install = 'y'">
-        <xsl:call-template name="output-root">
-          <xsl:with-param
-               name="out-string"
-               select="substring-before($out-string,string($APOS))"/>
-        </xsl:call-template>
-        <xsl:text>'\''</xsl:text>
-        <xsl:call-template name="output-install">
-          <xsl:with-param name="out-string"
-                          select="substring-after($out-string,string($APOS))"/>
-        </xsl:call-template>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:call-template name="output-root">
-          <xsl:with-param name="out-string" select="$out-string"/>
-        </xsl:call-template>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-
-</xsl:stylesheet>

BLFS/xsl/process-replaceable.xsl

@@ -1,165 +0,0 @@
-<?xml version="1.0" encoding="ISO-8859-1"?>
-
-<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-    version="1.0">
-
-<!--===================================================================-->
-  <!-- Localization in the form ll_CC.charmap@modifier (to be used in
-       bash shell startup scripts). ll, CC, and charmap must be present:
-       no way to use "C" or "POSIX". -->
-  <xsl:param name="language" select="'en_US.UTF-8'"/>
-
-  <!-- Break it in pieces -->
-  <xsl:variable name="lang-ll">
-    <xsl:copy-of select="substring-before($language,'_')"/>
-  </xsl:variable>
-  <xsl:variable name="lang-CC">
-     <xsl:copy-of
-            select="substring-before(substring-after($language,'_'),'.')"/>
-  </xsl:variable>
-  <xsl:variable name="lang-charmap">
-    <xsl:choose>
-      <xsl:when test="contains($language,'@')">
-         <xsl:copy-of
-               select="substring-before(substring-after($language,'.'),'@')"/>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:copy-of select="substring-after($language,'.')"/>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:variable>
-  <xsl:variable name="lang-modifier">
-    <xsl:choose>
-      <xsl:when test="contains($language,'@')">
-         <xsl:copy-of select="concat('@',substring-after($language,'@'))"/>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:copy-of select="''"/>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:variable>
-<!-- end of language variables -->
-
-<!--===================================================================-->
-<!-- to be used at places where we need the domain- or host- name -->
-  <xsl:param name="fqdn" select="'belgarath.example.org'"/>
-
-<!-- make various useful variables -->
-  <xsl:variable name="hostname" select="substring-before($fqdn,'.')"/>
-  <xsl:variable name="domainname" select="substring-after($fqdn,'.')"/>
-  <xsl:variable name="DOMAINNAME" select="translate($domainname,
-        'abcdefghijklmnopqrstuvwxyz', 'ABCDEFGHIJKLMNOPQRSTUVWXYZ')"/>
-<!-- end of host/domain name variables -->
-
-<!--===================================================================-->
-<!-- keyboard layout for the gdm page (as of BLFS 9.0) -->
-  <xsl:param name="xkblayout" select="'us'"/>
-
-<!--===================================================================-->
-<!-- the main template: to be adjusted depending on the book -->
-  <xsl:template match="replaceable">
-    <xsl:choose>
-<!-- When adding a user to a group, the book uses "username" in a replaceable
-     tag. Replace by the user name only if not running as root -->
-      <xsl:when test="contains(string(),'username') and $sudo='y'">
-        <xsl:text>$USER</xsl:text>
-      </xsl:when>
-<!-- The next three entries are for gpm. I guess those settings are OK
-     for a laptop or desktop. -->
-      <xsl:when test="contains(string(),'yourprotocol')">
-        <xsl:text>imps2</xsl:text>
-      </xsl:when>
-      <xsl:when test="contains(string(),'yourdevice')">
-        <xsl:text>/dev/input/mice</xsl:text>
-      </xsl:when>
-      <xsl:when test="contains(string(),'additional options')"/>
-<!-- the book has four fields for language. The language param is
-     broken into four pieces above. We use the results here. -->
-      <xsl:when test="contains(string(),'&lt;ll&gt;')">
-        <xsl:copy-of select="$lang-ll"/>
-      </xsl:when>
-      <xsl:when test="contains(string(),'&lt;CC&gt;')">
-        <xsl:copy-of select="$lang-CC"/>
-      </xsl:when>
-      <xsl:when test="contains(string(),'&lt;charmap&gt;')">
-        <xsl:copy-of select="$lang-charmap"/>
-      </xsl:when>
-      <xsl:when test="contains(string(),'@modifier')">
-        <xsl:copy-of select="$lang-modifier"/>
-      </xsl:when>
-<!-- keyboard layout for X/waylang (only GDM as of BLFS-9.0) -->
-      <xsl:when test="contains(string(),'layout')">
-        <xsl:copy-of select="$xkblayout"/>
-      </xsl:when>
-<!-- At several places, the number of jobs is given as "N" in a replaceable
-     tag. We either detect "N" alone or &lt;N&gt; Replace N with 4. -->
-      <xsl:when test="contains(string(),'&lt;N&gt;') or string()='N'">
-        <xsl:text>4</xsl:text>
-      </xsl:when>
-<!-- Mercurial config file uses user_name. Replace only if non root.
-     Add a bogus mail field. That works for the proposed tests anyway. -->
-      <xsl:when test="contains(string(),'user_name') and $sudo='y'">
-        <xsl:text>$USER ${USER}@mail.bogus</xsl:text>
-      </xsl:when>
-<!-- Use the config for Gtk+3 as is -->
-      <xsl:when test="ancestor::sect1[@id='gtk3' or @id='gtk4']">
-        <xsl:copy-of select="string()"/>
-      </xsl:when>
-<!-- Give 1Gb to fop. Hopefully, nobody has less RAM nowadays. -->
-      <xsl:when test="contains(string(),'RAM_Installed')">
-        <xsl:text>1024</xsl:text>
-      </xsl:when>
-<!-- for MIT-Kerberos config file -->
-      <xsl:when test="string()='&lt;EXAMPLE.ORG&gt;'">
-        <xsl:copy-of select="$DOMAINNAME"/>
-      </xsl:when>
-      <xsl:when test="string()='&lt;example.org&gt;'">
-        <xsl:copy-of select="$domainname"/>
-      </xsl:when>
-      <xsl:when test="string()='&lt;belgarath.example.org&gt;'">
-        <xsl:copy-of select="$fqdn"/>
-      </xsl:when>
-<!-- in this case, even root can be used -->
-      <xsl:when test="string()='&lt;loginname&gt;'">
-        <xsl:text>$USER</xsl:text>
-      </xsl:when>
-<!-- for xorg environment. Note that libreoffice too uses &lt;PREFIX&gt; -->
-      <xsl:when test="string()='&lt;PREFIX&gt;' and
-                      ancestor::sect1[@id='xorg-env']">
-        <xsl:text>/usr</xsl:text>
-      </xsl:when>
-<!-- for libreoffice. Note that xorg environment too uses &lt;PREFIX&gt; -->
-      <xsl:when test="string()='&lt;PREFIX&gt;' and
-                      ancestor::sect1[@id='libreoffice']">
-                      <xsl:text>/opt/</xsl:text>
-                      <xsl:value-of select="ancestor::sect1/@xreflabel"/>
-      </xsl:when>
-<!-- for abiword -->
-      <xsl:when test="string()='&lt;lang&gt;'">
-        <xsl:choose>
-          <xsl:when test="starts-with($language,'en_US')">
-            <!-- normal.awt for en_US is already there, copy
-                 the one for en_GB (could be any other) -->
-            <xsl:text>en_GB</xsl:text>
-          </xsl:when>
-          <xsl:otherwise>
-            <!-- in general, there are normal.awt-ll_CC files-->
-            <xsl:copy-of select="$lang-ll"/>
-            <xsl:text>_</xsl:text>
-            <xsl:copy-of select="$lang-CC"/>
-          </xsl:otherwise>
-        </xsl:choose>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:text>**EDITME</xsl:text>
-        <xsl:apply-templates/>
-        <xsl:text>EDITME**</xsl:text>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-
-  <xsl:template match="replaceable" mode="root">
-    <xsl:apply-templates select="."/>
-  </xsl:template>
-
-</xsl:stylesheet>

CHEATSHEET

@@ -1,119 +0,0 @@
-This file contains examples of menu settings for various tasks.
-------------------------------
-LFS book, System V, stable (8.2) version.
-Download the files to /usr/src (verify you have write access)
-Build in /mnt/lfs (should be owned by root, verify you can execute sudo)
-Clean the build directory before beginning
-Build a kernel, whose configuration is in /home/user/config-4.15-lfs-1
-An fstab for the future system is located in /home/user/fstablfs
-Run only the critical testsuites
-Settings for a French user
-Run four make jobs in parallel
------------------------------
-BOOK Settings --->
-    Use BOOK (Linux From Scratch System V)  --->
-    Release (Branch or stable book)  --->
-    Branch (preceded by "branch-"), stable Version, or tag (8.2)
-[ ] Add blfs-tool support (NEW)
-[ ] Add custom tools support (NEW)
-
-General Settings --->
-       Build Directory (/mnt/lfs)
-   [*] Retrieve source files
-         Package Archive Directory (/usr/src)
-   [ ]   Retry on 'connection refused' failure (NEW)
-         Number of retry attempts on download failures (20) (NEW)
-         Download timeout (in seconds) (30) (NEW)
-         FTP mirror (http://ftp.osuosl.org) (NEW)
-   [*] Run the makefile
-   [*] Rebuild files
-
-Build Settings --->
-   [*] Run testsuites
-         Tests level (Only final critical testsuites)  --->
-       Flavour (Don't stop on testsuite failures)  --->
-   [ ] Package management
-   [ ] Create a log of installed files for each package
-   [*] Use a custom fstab file
-         Fstab file (optional) ($HOME/fstablfs)
-   [*] Build the kernel
-         Kernel config file ($HOME/config-4.15-lfs-1)
-   [ ] Strip Installed Binaries/Libraries
-   [ ] Install non-wide-character ncurses
-   [ ] DO NOT use/display progress_bar
-       TimeZone (Europe/Paris)
-       Language (fr_FR.UTF-8)
-   [ ] Install the full set of locales
-       Groff page size (A4)  --->
-
-Advanced Features --->
-   [*] Create SBU and disk usage report
-   [ ] Run comparison analysis on final stage
-   [*] Optimization and parallelization
-         Optimization settings  --->
-           Number of parallel `make' jobs (4)
-           Optimization level  (Both temp tools and final system)  --->
-       Internal Settings (WARNING: for jhalfs developers only)  --->
-
-[ ] Rebuild the Makefile (see help)
-
-------------------------------
-------------------------------
-LFS book, systemd, XML source of the LFS book in /usr/src/lfsbook
-Download the files to /usr/src (verify you have write access)
-Build in /mnt/lfs (should be owned by root, verify you can execute sudo)
-Clean the build directory before beginning
-Build a kernel, whose configuration is in /home/user/config-4.15-lfs-systemd
-An fstab for the future system si located in /home/user/fstablfs
-Run all the testsuites
-Settings for an user in California
-Run four make jobs in parallel
------------------------------
-BOOK Settings --->
-    Use BOOK (Linux From Scratch systemd)  --->
-    Release (Working Copy)  --->
-    Loc of working copy (mandatory) (/usr/src/lfsbook)
-[ ] Add blfs-tool support (NEW)
-[ ] Add custom tools support (NEW)
-
-General Settings --->
-       Build Directory (/mnt/lfs)
-   [*] Retrieve source files
-         Package Archive Directory (/usr/src)
-   [ ]   Retry on 'connection refused' failure (NEW)
-         Number of retry attempts on download failures (20) (NEW)
-         Download timeout (in seconds) (30) (NEW)
-         FTP mirror (http://ftp.osuosl.org) (NEW)
-   [*] Run the makefile
-   [*] Rebuild files
-
-Build Settings --->
-   [*] Run testsuites
-         Tests level (Both temporary tools and final system testsuites) --->
-       Flavour (Don't stop on testsuite failures)  --->
-   [ ] Package management
-   [ ] Create a log of installed files for each package
-   [*] Use a custom fstab file
-         Fstab file (optional) ($HOME/fstablfs)
-   [*] Build the kernel
-         Kernel config file ($HOME/config-4.15-lfs-systemd
-   [ ] Strip Installed Binaries/Libraries
-   [ ] Install non-wide-character ncurses
-   [ ] DO NOT use/display progress_bar
-       TimeZone (America/Los_Angeles)
-       Language (en_US.UTF-8)
-   [ ] Install the full set of locales
-       Groff page size (letter)  --->
-
-Advanced Features --->
-   [*] Create SBU and disk usage report
-   [ ] Run comparison analysis on final stage
-   [*] Optimization and parallelization
-         Optimization settings  --->
-           Number of parallel `make' jobs (4)
-           Optimization level  (Both temp tools and final system)  --->
-       Internal Settings (WARNING: for jhalfs developers only)  --->
-
-[ ] Rebuild the Makefile (see help)
-
-------------------------------

CLFS/clfs.xsl

@@ -0,0 +1,331 @@
+<?xml version="1.0"?>
+<!DOCTYPE xsl:stylesheet [
+ <!ENTITY % general-entities SYSTEM "FAKEDIR/general.ent">
+  %general-entities;
+]>
+
+<!-- $Id$ -->
+
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+    xmlns:exsl="http://exslt.org/common"
+    extension-element-prefixes="exsl"
+    version="1.0">
+
+<!-- XSLT stylesheet to create shell scripts from CLFS books. -->
+
+  <!-- Build method used -->
+  <xsl:param name="method" select="chroot"/>
+
+  <!-- Run test suites?
+       0 = none
+       1 = only Glibc, GCC and Binutils testsuites
+       2 = all testsuites
+       3 = alias to 2
+  -->
+  <xsl:param name="testsuite" select="1"/>
+
+  <!-- Bomb on test suites failures?
+       n = no, I want to build the full system and review the logs
+       y = yes, bomb at the first test suite failure to can review the build dir
+  -->
+  <xsl:param name="bomb-testsuite" select="n"/>
+
+  <!-- Install vim-lang package? -->
+  <xsl:param name="vim-lang" select="y"/>
+
+  <!-- Time zone -->
+  <xsl:param name="timezone" select="GMT"/>
+
+  <!-- Page size -->
+  <xsl:param name="page" select="letter"/>
+
+  <!-- Locale settings -->
+  <xsl:param name="lang" select="C"/>
+
+  <!-- Sparc64 processor type -->
+  <xsl:param name="sparc" select="none"/>
+
+  <xsl:template match="/">
+    <xsl:apply-templates select="//sect1"/>
+  </xsl:template>
+
+  <xsl:template match="sect1">
+    <xsl:choose>
+      <xsl:when test="../@id='chapter-partitioning' or
+                      ../@id='chapter-getting-materials' or
+                      ../@id='chapter-final-preps'"/>
+      <xsl:when test="../@id='chapter-testsuite-tools' and $testsuite='0'"/>
+      <xsl:when test="../@id='chapter-boot' and $method='chroot'"/>
+      <xsl:when test="../@id='chapter-chroot' and $method='boot'"/>
+      <xsl:otherwise>
+        <xsl:if test="count(descendant::screen/userinput) &gt; 0 and
+                      count(descendant::screen/userinput) &gt;
+                      count(descendant::screen[@role='nodump'])">
+            <!-- The dirs names -->
+          <xsl:variable name="pi-dir" select="../processing-instruction('dbhtml')"/>
+          <xsl:variable name="pi-dir-value" select="substring-after($pi-dir,'dir=')"/>
+          <xsl:variable name="quote-dir" select="substring($pi-dir-value,1,1)"/>
+          <xsl:variable name="dirname" select="substring-before(substring($pi-dir-value,2),$quote-dir)"/>
+            <!-- The file names -->
+          <xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
+          <xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
+          <xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
+            <!-- The build order -->
+          <xsl:variable name="position" select="position()"/>
+          <xsl:variable name="order">
+            <xsl:choose>
+              <xsl:when test="string-length($position) = 1">
+                <xsl:text>00</xsl:text>
+                <xsl:value-of select="$position"/>
+              </xsl:when>
+              <xsl:when test="string-length($position) = 2">
+                <xsl:text>0</xsl:text>
+                <xsl:value-of select="$position"/>
+              </xsl:when>
+              <xsl:otherwise>
+                <xsl:value-of select="$position"/>
+              </xsl:otherwise>
+            </xsl:choose>
+          </xsl:variable>
+            <!-- Creating dirs and files -->
+          <exsl:document href="{$dirname}/{$order}-{$filename}" method="text">
+            <xsl:choose>
+              <xsl:when test="@id='ch-chroot-changingowner' or
+                        @id='ch-chroot-creatingdirs' or
+                        @id='ch-chroot-createfiles' or
+                        @id='ch-system-stripping'">
+                <xsl:text>#!/tools/bin/bash&#xA;set +h&#xA;</xsl:text>
+              </xsl:when>
+              <xsl:otherwise>
+                <xsl:text>#!/bin/bash&#xA;set +h&#xA;</xsl:text>
+              </xsl:otherwise>
+            </xsl:choose>
+            <xsl:if test="not(@id='ch-system-stripping')">
+              <xsl:text>set -e</xsl:text>
+            </xsl:if>
+            <xsl:text>&#xA;</xsl:text>
+            <xsl:if test="sect2[@role='installation'] and
+                          not(@id='ch-system-multiarch-wrapper')">
+              <xsl:text>cd $PKGDIR&#xA;</xsl:text>
+              <xsl:if test="@id='ch-system-vim' and $vim-lang = 'y'">
+                <xsl:text>tar -xvf ../vim-&vim-version;-lang.* --strip-components=1&#xA;</xsl:text>
+              </xsl:if>
+            </xsl:if>
+            <xsl:apply-templates select=".//para/userinput | .//screen"/>
+            <xsl:if test="not(@id='ch-chroot-chroot')">
+              <xsl:text>echo -e "\n\nTotalseconds: $SECONDS\n"&#xA;</xsl:text>
+            </xsl:if>
+            <xsl:text>exit</xsl:text>
+          </exsl:document>
+        </xsl:if>
+      </xsl:otherwise>
+    </xsl:choose>
+  </xsl:template>
+
+  <xsl:template match="screen">
+    <xsl:if test="child::* = userinput and not(@role = 'nodump')">
+      <xsl:apply-templates select="userinput" mode="screen"/>
+    </xsl:if>
+  </xsl:template>
+
+  <xsl:template match="para/userinput">
+    <xsl:if test="(contains(string(),'test') or
+            contains(string(),'check')) and
+            ($testsuite = '2' or $testsuite = '3')">
+      <xsl:choose>
+        <xsl:when test="$bomb-testsuite = 'n'">
+          <xsl:value-of select="substring-before(string(),'make')"/>
+          <xsl:text>make -k</xsl:text>
+          <xsl:value-of select="substring-after(string(),'make')"/>
+          <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
+        </xsl:when>
+        <xsl:otherwise>
+          <xsl:apply-templates/>
+          <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1</xsl:text>
+          <xsl:if test="contains(string(),' -k ')">
+            <xsl:text> || true</xsl:text>
+          </xsl:if>
+          <xsl:text>&#xA;</xsl:text>
+        </xsl:otherwise>
+      </xsl:choose>
+    </xsl:if>
+  </xsl:template>
+
+  <xsl:template match="userinput" mode="screen">
+    <xsl:choose>
+      <!-- Estandarized package formats -->
+      <xsl:when test="contains(string(),'tar.gz')">
+        <xsl:value-of select="substring-before(string(),'tar.gz')"/>
+        <xsl:text>tar.*</xsl:text>
+        <xsl:value-of select="substring-after(string(),'tar.gz')"/>
+        <xsl:text>&#xA;</xsl:text>
+      </xsl:when>
+      <!-- Setting $LANG for /etc/profile -->
+      <xsl:when test="ancestor::sect1[@id='ch-scripts-profile'] and
+                contains(string(),'export LANG=')">
+        <xsl:value-of select="substring-before(string(),'export LANG=')"/>
+        <xsl:text>export LANG=</xsl:text>
+        <xsl:value-of select="$lang"/>
+        <xsl:value-of select="substring-after(string(),'charmap]')"/>
+        <xsl:text>&#xA;</xsl:text>
+      </xsl:when>
+      <!-- Compile the keymap into the kernel has been disabled for 1.0 -->
+      <xsl:when test="contains(string(),'defkeymap')"/>
+      <!-- Copying the kernel config file -->
+      <xsl:when test="string() = 'make mrproper'">
+        <xsl:text>make mrproper&#xA;</xsl:text>
+        <xsl:if test="ancestor::sect1[@id='ch-boot-kernel']">
+          <xsl:text>cp -v ../bootkernel-config .config&#xA;</xsl:text>
+        </xsl:if>
+        <xsl:if test="ancestor::sect1[@id='ch-bootable-kernel']">
+          <xsl:text>cp -v ../kernel-config .config&#xA;</xsl:text>
+        </xsl:if>
+      </xsl:when>
+      <!-- No interactive commands are needed if the .config file is the proper one -->
+      <xsl:when test="contains(string(),'menuconfig')"/>
+      <!-- The Coreutils and Module-Init-Tools test suites are optional -->
+      <xsl:when test="(ancestor::sect1[@id='ch-system-coreutils'] or
+                ancestor::sect1[@id='ch-system-module-init-tools']) and
+                (contains(string(),'check') or
+                contains(string(),'dummy'))">
+        <xsl:choose>
+          <xsl:when test="$testsuite = '0' or $testsuite = '1'"/>
+          <xsl:otherwise>
+            <xsl:if test="not(contains(string(),'check'))">
+              <xsl:apply-templates/>
+              <xsl:text>&#xA;</xsl:text>
+            </xsl:if>
+            <xsl:if test="contains(string(),'check')">
+              <xsl:choose>
+                <xsl:when test="$bomb-testsuite = 'n'">
+                  <xsl:value-of select="substring-before(string(),'check')"/>
+                  <xsl:text>-k check</xsl:text>
+                  <xsl:value-of select="substring-after(string(),'check')"/>
+                  <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
+                </xsl:when>
+                <xsl:otherwise>
+                  <xsl:apply-templates/>
+                  <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1</xsl:text>
+                  <xsl:if test="contains(string(),' -k ')">
+                    <xsl:text> || true</xsl:text>
+                  </xsl:if>
+                  <xsl:text>&#xA;</xsl:text>
+                </xsl:otherwise>
+              </xsl:choose>
+            </xsl:if>
+          </xsl:otherwise>
+        </xsl:choose>
+      </xsl:when>
+      <!-- Fixing toolchain test suites run -->
+      <xsl:when test="string() = 'make check' or
+                string() = 'make -k check'">
+        <xsl:choose>
+          <xsl:when test="$testsuite != '0'">
+            <xsl:choose>
+              <xsl:when test="$bomb-testsuite = 'n'">
+                <xsl:text>make -k check &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
+              </xsl:when>
+              <xsl:otherwise>
+                <xsl:apply-templates/>
+                <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1</xsl:text>
+                <xsl:if test="contains(string(),' -k ')">
+                  <xsl:text> || true</xsl:text>
+                </xsl:if>
+                <xsl:text>&#xA;</xsl:text>
+              </xsl:otherwise>
+            </xsl:choose>
+          </xsl:when>
+        </xsl:choose>
+      </xsl:when>
+      <xsl:when test="contains(string(),'glibc-check-log')">
+        <xsl:choose>
+          <xsl:when test="$testsuite != '0'">
+            <xsl:value-of select="substring-before(string(),'&gt;g')"/>
+            <xsl:choose>
+              <xsl:when test="$bomb-testsuite = 'n'">
+                <xsl:text>&gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
+              </xsl:when>
+              <xsl:otherwise>
+                <xsl:text>&gt;&gt; $TEST_LOG 2&gt;&amp;1</xsl:text>
+                <xsl:if test="contains(string(),' -k ')">
+                  <xsl:text> || true</xsl:text>
+                </xsl:if>
+                <xsl:text>&#xA;</xsl:text>
+              </xsl:otherwise>
+            </xsl:choose>
+          </xsl:when>
+        </xsl:choose>
+      </xsl:when>
+      <xsl:when test="contains(string(),'test_summary') or
+                contains(string(),'expect -c')">
+        <xsl:choose>
+          <xsl:when test="$testsuite != '0'">
+            <xsl:apply-templates/>
+            <xsl:text> &gt;&gt; $TEST_LOG&#xA;</xsl:text>
+          </xsl:when>
+        </xsl:choose>
+      </xsl:when>
+      <!-- Don't stop on strip run -->
+      <xsl:when test="contains(string(),'strip ')">
+        <xsl:apply-templates/>
+        <xsl:text> || true&#xA;</xsl:text>
+      </xsl:when>
+      <!-- The rest of commands -->
+      <xsl:otherwise>
+        <xsl:apply-templates/>
+        <xsl:text>&#xA;</xsl:text>
+      </xsl:otherwise>
+    </xsl:choose>
+  </xsl:template>
+
+  <xsl:template match="replaceable">
+    <xsl:choose>
+      <xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
+        <xsl:value-of select="$timezone"/>
+      </xsl:when>
+      <xsl:when test="ancestor::sect1[@id='ch-system-groff']">
+        <xsl:value-of select="$page"/>
+      </xsl:when>
+      <xsl:when test="ancestor::sect1[@id='ch-cross-tools-flags']">
+        <xsl:choose>
+          <xsl:when test="contains(string(),'BUILD32')">
+            <xsl:choose>
+              <xsl:when test="$sparc = '1' or $sparc = '2'">
+                <xsl:text>-m32 -mcpu=ultrasparc -mtune=ultrasparc</xsl:text>
+              </xsl:when>
+              <xsl:when test="$sparc = '3'">
+                <xsl:text>-m32 -mcpu=ultrasparc3 -mtune=ultrasparc3</xsl:text>
+              </xsl:when>
+            </xsl:choose>
+          </xsl:when>
+          <xsl:when test="contains(string(),'BUILD64')">
+            <xsl:choose>
+              <xsl:when test="$sparc = '1' or $sparc = '2'">
+                <xsl:text>-m64 -mcpu=ultrasparc -mtune=ultrasparc</xsl:text>
+              </xsl:when>
+              <xsl:when test="$sparc = '3'">
+                <xsl:text>-m64 -mcpu=ultrasparc3 -mtune=ultrasparc3</xsl:text>
+              </xsl:when>
+            </xsl:choose>
+          </xsl:when>
+          <xsl:when test="contains(string(),'GCCTARGET')">
+            <xsl:choose>
+              <xsl:when test="$sparc = '1' or $sparc = '2'">
+                <xsl:text>-mcpu=ultrasparc -mtune=ultrasparc</xsl:text>
+              </xsl:when>
+              <xsl:when test="$sparc = '3'">
+                <xsl:text>-mcpu=ultrasparc3 -mtune=ultrasparc3</xsl:text>
+              </xsl:when>
+            </xsl:choose>
+          </xsl:when>
+        </xsl:choose>
+      </xsl:when>
+      <xsl:otherwise>
+        <xsl:text>**EDITME</xsl:text>
+        <xsl:apply-templates/>
+        <xsl:text>EDITME**</xsl:text>
+      </xsl:otherwise>
+    </xsl:choose>
+  </xsl:template>
+
+</xsl:stylesheet>

CLFS2/clfs2.xsl

@@ -0,0 +1,153 @@
+<?xml version="1.0"?>
+<!DOCTYPE xsl:stylesheet [
+ <!ENTITY % general-entities SYSTEM "FAKEDIR/general.ent">
+  %general-entities;
+]>
+
+<!-- $Id$ -->
+
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+    xmlns:exsl="http://exslt.org/common"
+    extension-element-prefixes="exsl"
+    version="1.0">
+
+<!-- XSLT stylesheet to create shell scripts from CLFS2 books. -->
+
+  <!-- Install vim-lang package? -->
+  <xsl:param name="vim-lang" select="y"/>
+
+  <!-- Time zone -->
+  <xsl:param name="timezone" select="GMT"/>
+
+  <!-- Page size -->
+  <xsl:param name="page" select="letter"/>
+
+  <!-- Locale settings -->
+  <xsl:param name="lang" select="C"/>
+
+  <xsl:template match="/">
+    <xsl:apply-templates select="//sect1"/>
+  </xsl:template>
+
+  <xsl:template match="sect1">
+    <xsl:choose>
+      <xsl:when test="../@id='chapter-partitioning' or
+                      ../@id='chapter-getting-materials' or
+                      ../@id='chapter-final-preps'"/>
+      <xsl:otherwise>
+        <xsl:if test="count(descendant::screen/userinput) &gt; 0 and
+                      count(descendant::screen/userinput) &gt;
+                      count(descendant::screen[@role='nodump'])">
+            <!-- The dirs names -->
+          <xsl:variable name="pi-dir" select="../processing-instruction('dbhtml')"/>
+          <xsl:variable name="pi-dir-value" select="substring-after($pi-dir,'dir=')"/>
+          <xsl:variable name="quote-dir" select="substring($pi-dir-value,1,1)"/>
+          <xsl:variable name="dirname" select="substring-before(substring($pi-dir-value,2),$quote-dir)"/>
+            <!-- The file names -->
+          <xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
+          <xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
+          <xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
+            <!-- The build order -->
+          <xsl:variable name="position" select="position()"/>
+          <xsl:variable name="order">
+            <xsl:choose>
+              <xsl:when test="string-length($position) = 1">
+                <xsl:text>00</xsl:text>
+                <xsl:value-of select="$position"/>
+              </xsl:when>
+              <xsl:when test="string-length($position) = 2">
+                <xsl:text>0</xsl:text>
+                <xsl:value-of select="$position"/>
+              </xsl:when>
+              <xsl:otherwise>
+                <xsl:value-of select="$position"/>
+              </xsl:otherwise>
+            </xsl:choose>
+          </xsl:variable>
+            <!-- Creating dirs and files -->
+          <exsl:document href="{$dirname}/{$order}-{$filename}" method="text">
+            <xsl:text>#!/bin/bash&#xA;set +h&#xA;</xsl:text>
+            <xsl:if test="not(@id='ch-system-stripping')">
+              <xsl:text>set -e&#xA;</xsl:text>
+            </xsl:if>
+            <xsl:text>&#xA;</xsl:text>
+            <xsl:if test="sect2[@role='installation']">
+              <xsl:text>cd $PKGDIR&#xA;</xsl:text>
+              <xsl:if test="@id='ch-system-vim' and $vim-lang = 'y'">
+                <xsl:text>tar -xvf ../vim-&vim-version;-lang.* --strip-components=1&#xA;</xsl:text>
+              </xsl:if>
+            </xsl:if>
+            <xsl:apply-templates select=".//para/userinput | .//screen"/>
+            <xsl:text>exit</xsl:text>
+          </exsl:document>
+        </xsl:if>
+      </xsl:otherwise>
+    </xsl:choose>
+  </xsl:template>
+
+  <xsl:template match="screen">
+    <xsl:if test="child::* = userinput and not(@role = 'nodump')">
+      <xsl:apply-templates select="userinput" mode="screen"/>
+    </xsl:if>
+  </xsl:template>
+
+  <xsl:template match="para/userinput"/>
+
+  <xsl:template match="userinput" mode="screen">
+    <xsl:choose>
+      <!-- Estandarized package formats -->
+      <xsl:when test="contains(string(),'tar.gz')">
+        <xsl:value-of select="substring-before(string(),'tar.gz')"/>
+        <xsl:text>tar.*</xsl:text>
+        <xsl:value-of select="substring-after(string(),'tar.gz')"/>
+        <xsl:text>&#xA;</xsl:text>
+      </xsl:when>
+      <!-- Setting $LANG for /etc/profile -->
+      <xsl:when test="ancestor::sect1[@id='ch-scripts-profile'] and
+                contains(string(),'export LANG=')">
+        <xsl:value-of select="substring-before(string(),'export LANG=')"/>
+        <xsl:text>export LANG=</xsl:text>
+        <xsl:value-of select="$lang"/>
+        <xsl:value-of select="substring-after(string(),'charmap]')"/>
+        <xsl:text>&#xA;</xsl:text>
+      </xsl:when>
+      <!-- Compile the keymap into the kernel has been disabled -->
+      <xsl:when test="contains(string(),'defkeymap')"/>
+      <!-- Copying the kernel config file -->
+      <xsl:when test="string() = 'make mrproper'">
+        <xsl:text>make mrproper&#xA;</xsl:text>
+        <xsl:text>cp -v ../kernel-config .config&#xA;</xsl:text>
+      </xsl:when>
+      <!-- No interactive commands are needed if the .config file is the proper one -->
+      <xsl:when test="contains(string(),'menuconfig')"/>
+      <!-- Don't stop on strip run -->
+      <xsl:when test="contains(string(),'strip ')">
+        <xsl:apply-templates/>
+        <xsl:text> || true&#xA;</xsl:text>
+      </xsl:when>
+      <!-- The rest of commands -->
+      <xsl:otherwise>
+        <xsl:apply-templates/>
+        <xsl:text>&#xA;</xsl:text>
+      </xsl:otherwise>
+    </xsl:choose>
+  </xsl:template>
+
+  <xsl:template match="replaceable">
+    <xsl:choose>
+      <xsl:when test="ancestor::sect1[@id='ch-cross-tools-glibc']">
+        <xsl:value-of select="$timezone"/>
+      </xsl:when>
+      <xsl:when test="ancestor::sect1[@id='ch-cross-tools-groff'] or
+                      ancestor::sect1[@id='ch-system-groff']">
+        <xsl:value-of select="$page"/>
+      </xsl:when>
+      <xsl:otherwise>
+        <xsl:text>**EDITME</xsl:text>
+        <xsl:apply-templates/>
+        <xsl:text>EDITME**</xsl:text>
+      </xsl:otherwise>
+    </xsl:choose>
+  </xsl:template>
+
+</xsl:stylesheet>

CLFS2/master.sh

@@ -0,0 +1,536 @@
+#!/bin/bash
+# $Id$
+
+###################################
+###          FUNCTIONS          ###
+###################################
+
+
+#----------------------------#
+host_prep_Makefiles() {      # Initialization of the system
+#----------------------------#
+  local   CLFS_HOST
+
+  echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
+
+  # defined here, only for ease of reading
+  CLFS_HOST="$(echo $MACHTYPE | sed "s/$(echo $MACHTYPE | cut -d- -f2)/cross/")"
+(
+cat << EOF
+
+025-addinguser:
+	@\$(call echo_message, Building)
+	@if [ ! -d \$(LUSER_HOME) ]; then \\
+		groupadd \$(LGROUP); \\
+		useradd -s /bin/bash -g \$(LGROUP) -m -k /dev/null \$(LUSER); \\
+	else \\
+		touch luser-exist; \\
+	fi;
+	@\$(call housekeeping)
+
+026-settingenvironment:  025-addinguser
+	@\$(call echo_message, Building)
+	@if [ -f \$(LUSER_HOME)/.bashrc -a ! -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
+		mv \$(LUSER_HOME)/.bashrc \$(LUSER_HOME)/.bashrc.XXX; \\
+	fi;
+	@if [ -f \$(LUSER_HOME)/.bash_profile  -a ! -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
+		mv \$(LUSER_HOME)/.bash_profile \$(LUSER_HOME)/.bash_profile.XXX; \\
+	fi;
+	@echo "set +h" > \$(LUSER_HOME)/.bashrc && \\
+	echo "umask 022" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "CLFS=\$(MOUNT_PT)" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "LC_ALL=POSIX" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "PATH=\$(MOUNT_PT)/cross-tools/bin:/bin:/usr/bin" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "export CLFS LC_ALL PATH" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "unset CFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "unset CXXFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "export CLFS_TARGET=\"${TARGET}\"" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "source $JHALFSDIR/envars" >> \$(LUSER_HOME)/.bashrc
+	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bashrc && \\
+	touch envars && \\
+	chown \$(LUSER):\$(LGROUP) envars
+	@\$(call housekeeping)
+
+027-create-directories: 026-settingenvironment
+	@\$(call echo_message, Building)
+
+	@mkdir -p \$(MOUNT_PT)/{bin,boot,dev,{etc/,}opt,home,lib,mnt}
+	@mkdir -p \$(MOUNT_PT)/{proc,media/{floppy,cdrom},sbin,srv,sys}
+	@mkdir -p \$(MOUNT_PT)/var/{lock,log,mail,run,spool}
+	@mkdir -p \$(MOUNT_PT)/var/{opt,cache,lib/{misc,locate},local}
+	@install -d -m 0750 \$(MOUNT_PT)/root
+	@install -d -m 1777 \$(MOUNT_PT){/var,}/tmp
+	@mkdir -p \$(MOUNT_PT)/usr/{,local/}{bin,include,lib,sbin,src}
+	@mkdir -p \$(MOUNT_PT)/usr/{,local/}share/{doc,info,locale,man}
+	@mkdir -p \$(MOUNT_PT)/usr/{,local/}share/{misc,terminfo,zoneinfo}
+	@mkdir -p \$(MOUNT_PT)/usr/{,local/}share/man/man{1,2,3,4,5,6,7,8}
+	@for dir in \$(MOUNT_PT)/usr{,/local}; do \\
+	  ln -s share/{man,doc,info} \$\$dir ; \\
+	done
+	@\$(call housekeeping)
+
+028-creating-sysfile: 027-create-directories
+	@\$(call echo_message, Building)
+
+	@touch \$(MOUNT_PT)/etc/mtab
+	@echo "root::0:0:root:/root:/bin/bash" >> \$(MOUNT_PT)/etc/passwd
+	@echo "root:x:0:" >> \$(MOUNT_PT)/etc/group
+	@echo "bin:x:1:"  >> \$(MOUNT_PT)/etc/group
+	@echo "sys:x:2:"  >> \$(MOUNT_PT)/etc/group
+	@echo "kmem:x:3"  >> \$(MOUNT_PT)/etc/group
+	@echo "tty:x:4:"  >> \$(MOUNT_PT)/etc/group
+	@echo "tape:x:5:"   >> \$(MOUNT_PT)/etc/group
+	@echo "daemon:x:6:" >> \$(MOUNT_PT)/etc/group
+	@echo "floppy:x:7:" >> \$(MOUNT_PT)/etc/group
+	@echo "disk:x:8:"   >> \$(MOUNT_PT)/etc/group
+	@echo "lp:x:9:"     >> \$(MOUNT_PT)/etc/group
+	@echo "dialout:x:10:" >> \$(MOUNT_PT)/etc/group
+	@echo "audio:x:11:"   >> \$(MOUNT_PT)/etc/group
+	@echo "video:x:12:"   >> \$(MOUNT_PT)/etc/group
+	@echo "utmp:x:13:"    >> \$(MOUNT_PT)/etc/group
+	@echo "usb:x:14:"     >> \$(MOUNT_PT)/etc/group
+	@echo "cdrom:x:15:"   >> \$(MOUNT_PT)/etc/group
+
+	@touch \$(MOUNT_PT)/var/run/utmp \$(MOUNT_PT)/var/log/{btmp,lastlog,wtmp}
+	@chmod 664 \$(MOUNT_PT)/var/run/utmp \$(MOUNT_PT)/var/log/lastlog
+	@chown -R \$(LUSER) \$(MOUNT_PT) && \\
+	chmod -R a+w \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
+	chmod -R a+w \$(SRCSDIR)
+	@\$(call housekeeping)
+
+EOF
+) >> $MKFILE.tmp
+
+  host_prep=" 025-addinguser 026-settingenvironment 027-create-directories 028-creating-sysfile"
+}
+
+
+#-----------------------------#
+cross_tools_Makefiles() {     #
+#-----------------------------#
+  echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools     ( LUSER ) ${R_arrow}"
+
+  for file in cross-tools/* ; do
+    # Keep the script file name
+    this_script=`basename $file`
+    #
+    # Skip this script...
+    case $this_script in
+      *cflags* | *variables* )  # work done in host_prep_Makefiles
+              continue ;;
+      *) ;;
+    esac
+
+    #
+    # Set the dependency for the first target.
+    if [ -z $PREV ] ; then PREV=028-creating-sysfile ; fi
+
+    # First append each name of the script files to a list (this will become
+    # the names of the targets in the Makefile
+    cross_tools="$cross_tools $this_script"
+
+    # Grab the name of the target (minus the -headers or -cross in the case of gcc
+    # and binutils in chapter 5)
+    name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' \
+                                  -e 's@-static@@' \
+                                  -e 's@-final@@' \
+				  -e 's@-64@@' \
+                                  -e 's@-n32@@'`
+    case $name in
+      glibc-headers) name="glibc" ;;
+    esac
+    pkg_tarball=$(get_package_tarball_name $name)
+    #--------------------------------------------------------------------#
+    #         >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<<          #
+    #--------------------------------------------------------------------#
+    #
+    # Drop in the name of the target on a new line, and the previous target
+    # as a dependency. Also call the echo_message function.
+    LUSER_wrt_target "${this_script}" "$PREV"
+    #
+    # If $pkg_tarball isn't empty, we've got a package...
+    if [ "$pkg_tarball" != "" ] ; then
+       LUSER_wrt_unpack "$pkg_tarball"
+       # If using optimizations, write the instructions
+       [[ "$OPTIMIZE" != "0" ]] &&  wrt_optimize "$name" && wrt_makeflags "$name"
+    fi
+    #
+    LUSER_wrt_RunAsUser "${file}"
+    #
+    [[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
+    #
+    # Include a touch of the target name so make can check if it's already been made.
+    wrt_touch
+    #
+    #--------------------------------------------------------------------#
+    #              >>>>>>>> END OF Makefile ENTRY <<<<<<<<               #
+    #--------------------------------------------------------------------#
+    #
+    # Keep the script file name for Makefile dependencies.
+    PREV=$this_script
+
+  done # for file in ....
+}
+
+
+
+#-----------------------------#
+final_system_Makefiles() {    #
+#-----------------------------#
+  echo "${tab_}${GREEN}Processing... ${L_arrow}final system    ( LUSER ) ${R_arrow}"
+
+  for file in final-system/* ; do
+    # Keep the script file name
+    this_script=`basename $file`
+
+    # Test if the stripping phase must be skipped.
+    # Skip alsp temp-perl for iterative runs
+    case $this_script in
+      *stripping*) [[ "$STRIP" = "n" ]] && continue ;;
+    esac
+
+    # Grab the name of the target, strip id number, XXX-script
+    name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' \
+                                  -e 's@temp-@@' \
+                                  -e 's@-64bit@@' \
+                                  -e 's@-64@@' \
+                                  -e 's@64@@' \
+                                  -e 's@n32@@'`
+
+    # Find the version of the command files, if it corresponds with the building of
+    # a specific package.
+    pkg_tarball=$(get_package_tarball_name $name)
+
+    # Append each name of the script files to a list (this will become
+    # the names of the targets in the Makefile
+    basicsystem="$basicsystem ${this_script}"
+
+    #--------------------------------------------------------------------#
+    #         >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<<          #
+    #--------------------------------------------------------------------#
+    #
+    # Drop in the name of the target on a new line, and the previous target
+    # as a dependency. Also call the echo_message function.
+    LUSER_wrt_target "${this_script}" "$PREV"
+    #
+    # If $pkg_tarball isn't empty, we've got a package...
+    if [ "$pkg_tarball" != "" ] ; then
+      # Touch timestamp file if installed files logs will be created.
+      # But only for the firt build when running iterative builds.
+      if [ "${INSTALL_LOG}" = "y" ] ; then
+        LUSER_wrt_TouchTimestamp
+      fi
+      LUSER_wrt_unpack "$pkg_tarball"
+      # If using optimizations, write the instructions
+      [[ "$OPTIMIZE" != "0" ]] &&  wrt_optimize "$name" && wrt_makeflags "$name"
+    fi
+    #
+    LUSER_wrt_RunAsUser "${file}"
+    #
+    # Write installed files log and remove the build directory(ies)
+    # except if the package build fails.
+    if [ "$pkg_tarball" != "" ] ; then
+      LUSER_RemoveBuildDirs "${name}"
+      if [ "${INSTALL_LOG}" = "y" ] ; then
+        LUSER_wrt_LogNewFiles "$name"
+      fi
+    fi
+    #
+    # Include a touch of the target name so make can check if it's already been made.
+    wrt_touch
+    #
+    #--------------------------------------------------------------------#
+    #              >>>>>>>> END OF Makefile ENTRY <<<<<<<<               #
+    #--------------------------------------------------------------------#
+    #
+    # Keep the script file name for Makefile dependencies.
+    PREV=${this_script}
+  done  # for file in final-system/* ...
+}
+
+
+
+#-----------------------------#
+bootscripts_Makefiles() {     #
+#-----------------------------#
+  echo "${tab_}${GREEN}Processing... ${L_arrow}bootscripts     ( LUSER ) ${R_arrow}"
+
+  for file in bootscripts/* ; do
+    # Keep the script file name
+    this_script=`basename $file`
+
+    case $this_script in
+      *udev)     continue ;; # This is not a script but a commentary, we want udev-rules
+      *console*) continue ;; # Use the files that came with the bootscripts
+      *network*) continue ;; # Manually create these files
+      *)  ;;
+    esac
+
+    # First append each name of the script files to a list (this will become
+    # the names of the targets in the Makefile
+    bootscripttools="$bootscripttools $this_script"
+
+    # Grab the name of the target, strip id number, XXX-script
+    name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'\
+                                  -e 's@-64bit@@' \
+                                  -e 's@-64@@' \
+                                  -e 's@64@@' \
+                                  -e 's@n32@@'`
+    case $name in
+      *bootscripts*) name=bootscripts-cross-lfs ;;
+      *udev-rules)   name=udev-cross-lfs ;;
+    esac
+
+    pkg_tarball=$(get_package_tarball_name $name)
+
+    #--------------------------------------------------------------------#
+    #         >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<<          #
+    #--------------------------------------------------------------------#
+    #
+    # Drop in the name of the target on a new line, and the previous target
+    # as a dependency. Also call the echo_message function.
+    LUSER_wrt_target "${this_script}" "$PREV"
+    #
+    # If $pkg_tarball isn't empty, we've got a package...
+    if [ "$pkg_tarball" != "" ] ; then
+      LUSER_wrt_unpack "$pkg_tarball"
+      if [ "${INSTALL_LOG}" = "y" ] ; then
+        LUSER_wrt_TouchTimestamp
+      fi
+    fi
+    #
+    LUSER_wrt_RunAsUser "${file}"
+    #
+    if [ "$pkg_tarball" != "" ] ; then
+      LUSER_RemoveBuildDirs "${name}"
+      if [ "${INSTALL_LOG}" = "y" ] ; then
+        LUSER_wrt_LogNewFiles "$name"
+      fi
+    fi
+    #
+    # Include a touch of the target name so make can check if it's already been made.
+    wrt_touch
+    #
+    #--------------------------------------------------------------------#
+    #              >>>>>>>> END OF Makefile ENTRY <<<<<<<<               #
+    #--------------------------------------------------------------------#
+    #
+    # Keep the script file name for Makefile dependencies.
+    PREV=$this_script
+
+  done  # for file in bootscripts/* ...
+
+}
+
+
+#-----------------------------#
+bootable_Makefiles() {        #
+#-----------------------------#
+  echo "${tab_}${GREEN}Processing... ${L_arrow}make bootable   ( LUSER ) ${R_arrow}"
+
+  for file in bootable/* ; do
+    # Keep the script file name
+    this_script=`basename $file`
+
+    # A little housekeeping on the scripts
+    case $this_script in
+      *grub | *aboot | *colo | *silo | *arcload | *lilo | *reboot* )  continue ;;
+      *fstab)  [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
+      *kernel) # if there is no kernel config file do not build the kernel
+               [[ -z $CONFIG ]] && continue
+                 # Copy the config file to /sources with a standardized name
+               cp $CONFIG $BUILDDIR/sources/kernel-config
+        ;;
+    esac
+    #
+    # First append each name of the script files to a list (this will become
+    # the names of the targets in the Makefile
+    # NOTE: new makfile format forces the last script, *chowning, into a separate
+    #  phase.
+    case ${this_script} in
+      *chowning) chowning=" ${this_script}"   ;;
+              *) bootable="$bootable $this_script"  ;;
+    esac
+    #
+    # Grab the name of the target, strip id number and misc words.
+    name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
+    case $this_script in
+      *kernel*) name=linux
+       ;;
+    esac
+
+    pkg_tarball=$(get_package_tarball_name $name)
+
+    #--------------------------------------------------------------------#
+    #         >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<<          #
+    #--------------------------------------------------------------------#
+    #
+    # Drop in the name of the target on a new line, and the previous target
+    # as a dependency. Also call the echo_message function.
+    LUSER_wrt_target "${this_script}" "$PREV"
+    #
+    # If $pkg_tarball isn't empty, we've got a package...
+    if [ "$pkg_tarball" != "" ] ; then
+      LUSER_wrt_unpack "$pkg_tarball"
+      if [ "${INSTALL_LOG}" = "y" ] ; then
+        LUSER_wrt_TouchTimestamp
+      fi
+    fi
+    #
+    # Select a script execution method
+    case $this_script in
+      *fstab*)  if [[ -n "$FSTAB" ]]; then
+                  LUSER_wrt_CopyFstab
+                else
+                  LUSER_wrt_RunAsUser "${file}"
+                fi
+          ;;
+      *chowning)  wrt_RunAsRoot "${file}"
+          ;;
+              *)  LUSER_wrt_RunAsUser "${file}"
+	  ;;
+    esac
+    #
+    # Housekeeping...remove any build directory(ies) except if the package build fails.
+    if [ "$pkg_tarball" != "" ] ; then
+      LUSER_RemoveBuildDirs "${name}"
+      if [ "${INSTALL_LOG}" = "y" ] ; then
+        LUSER_wrt_LogNewFiles "$name"
+      fi
+    fi
+    #
+    # Include a touch of the target name so make can check if it's already been made.
+    wrt_touch
+    #
+    #--------------------------------------------------------------------#
+    #              >>>>>>>> END OF Makefile ENTRY <<<<<<<<               #
+    #--------------------------------------------------------------------#
+    #
+    # Keep the script file name for Makefile dependencies.
+    PREV=$this_script
+
+  done
+
+}
+
+
+#-----------------------------#
+build_Makefile() {            # Construct a Makefile from the book scripts
+#-----------------------------#
+  echo "Creating Makefile... ${BOLD}START${OFF}"
+
+  cd $JHALFSDIR/${PROGNAME}-commands
+  # Start with a clean Makefile.tmp file
+  >$MKFILE.tmp
+
+  host_prep_Makefiles
+  cross_tools_Makefiles            # $cross_tools
+  final_system_Makefiles           # $basicsystem
+  bootscripts_Makefiles            # $bootscripttools
+  bootable_Makefiles               # $bootable
+  # Add the CUSTOM_TOOLS targets, if needed
+  [[ "$CUSTOM_TOOLS" = "y" ]] && wrt_CustomTools_target
+  # Add the BLFS_TOOL targets, if needed.
+  [[ "$BLFS_TOOL" = "y" ]] && wrt_blfs_tool_targets
+
+  # Add a header, some variables and include the function file
+  # to the top of the real Makefile.
+  wrt_Makefile_header
+
+  # Drop in the main target 'all:' and the chapter targets with each sub-target
+  # as a dependency.
+(
+cat << EOF
+
+all:	ck_UID mk_SETUP mk_LUSER create-sbu_du-report mk_CUSTOM_TOOLS mk_BLFS_TOOL mk_ROOT
+	@sudo make restore-luser-env
+	@sudo make do-housekeeping
+	@\$(call echo_finished,$VERSION)
+
+ck_UID:
+	@if [ \`id -u\` = "0" ]; then \\
+	  echo "--------------------------------------------------"; \\
+	  echo "You cannot run this makefile from the root account"; \\
+	  echo "--------------------------------------------------"; \\
+	  exit 1; \\
+	fi
+
+mk_SETUP:
+	@\$(call echo_SU_request)
+	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
+	@touch \$@
+
+mk_LUSER: mk_SETUP
+	@\$(call echo_SULUSER_request)
+	@(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) LUSER" )
+	@touch \$@
+
+mk_CUSTOM_TOOLS: create-sbu_du-report
+	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
+	  \$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
+	  (sudo \$(SU_LUSER) "mkdir -p $BUILDDIR$TRACKING_DIR"); \\
+	  (sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS"); \\
+	fi;
+	@touch \$@
+
+mk_BLFS_TOOL: mk_CUSTOM_TOOLS
+	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
+	  \$(call sh_echo_PHASE,Building BLFS_TOOL); \\
+	  (sudo \$(SU_LUSER) "mkdir -p $BUILDDIR$TRACKING_DIR"); \\
+	  (sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) BLFS_TOOL"); \\
+	fi;
+	@touch \$@
+
+mk_ROOT: create-sbu_du-report
+	@\$(call echo_SU_request)
+	@echo "$VERSION-sysroot - jhalfs build" > clfs-release && \\
+	sudo mv clfs-release \$(MOUNT_PT)/etc
+	@sudo make BREAKPOINT=\$(BREAKPOINT) ROOT
+	@touch \$@
+
+SETUP:        $host_prep
+LUSER:        $cross_tools $basicsystem $bootscripttools $bootable
+CUSTOM_TOOLS: $custom_list
+BLFS_TOOL:    $blfs_tool
+ROOT:         $chowning
+
+
+create-sbu_du-report: mk_LUSER
+	@\$(call echo_message, Building)
+	@if [ "\$(ADD_REPORT)" = "y" ]; then \\
+	  ./create-sbu_du-report.sh logs $VERSION; \\
+	  \$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
+	fi;
+	@touch  \$@
+
+restore-luser-env:
+	@\$(call echo_message, Building)
+	@if [ -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
+		mv -f \$(LUSER_HOME)/.bashrc.XXX \$(LUSER_HOME)/.bashrc; \\
+	fi;
+	@if [ -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
+		mv \$(LUSER_HOME)/.bash_profile.XXX \$(LUSER_HOME)/.bash_profile; \\
+	fi;
+	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bash* && \\
+	touch \$@ && \\
+	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
+	echo --------------------------------------------------------------------------------\$(WHITE)
+
+do-housekeeping:
+	@-if [ ! -f luser-exist ]; then \\
+		userdel \$(LUSER); \\
+		rm -rf \$(LUSER_HOME); \\
+	fi;
+
+EOF
+) >> $MKFILE
+
+  # Bring over the items from the Makefile.tmp
+  cat $MKFILE.tmp >> $MKFILE
+  rm $MKFILE.tmp
+  echo "Creating Makefile... ${BOLD}DONE${OFF}"
+
+}

CLFS3/clfs3.xsl

@@ -0,0 +1,154 @@
+<?xml version="1.0"?>
+<!DOCTYPE xsl:stylesheet [
+ <!ENTITY % general-entities SYSTEM "FAKEDIR/general.ent">
+  %general-entities;
+]>
+
+<!-- $Id$ -->
+
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+    xmlns:exsl="http://exslt.org/common"
+    extension-element-prefixes="exsl"
+    version="1.0">
+
+<!-- XSLT stylesheet to create shell scripts from CLFS2 books. -->
+
+  <!-- Endian level -->
+  <xsl:param name="endian" select="xbig"/>
+
+  <!-- Time zone -->
+  <xsl:param name="timezone" select="GMT"/>
+
+  <!-- Page size -->
+  <xsl:param name="page" select="letter"/>
+
+  <!-- Locale settings -->
+  <xsl:param name="lang" select="C"/>
+
+  <xsl:template match="/">
+    <xsl:apply-templates select="//sect1"/>
+  </xsl:template>
+
+  <xsl:template match="sect1">
+    <xsl:choose>
+      <xsl:when test="../@id='chapter-partitioning' or
+                      ../@id='chapter-getting-materials' or
+                      ../@id='chapter-final-preps'"/>
+      <xsl:otherwise>
+        <xsl:if test="count(descendant::screen/userinput) &gt; 0 and
+                      count(descendant::screen/userinput) &gt;
+                      count(descendant::screen[@role='nodump'])">
+            <!-- The dirs names -->
+          <xsl:variable name="pi-dir" select="../processing-instruction('dbhtml')"/>
+          <xsl:variable name="pi-dir-value" select="substring-after($pi-dir,'dir=')"/>
+          <xsl:variable name="quote-dir" select="substring($pi-dir-value,1,1)"/>
+          <xsl:variable name="dirname" select="substring-before(substring($pi-dir-value,2),$quote-dir)"/>
+            <!-- The file names -->
+          <xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
+          <xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
+          <xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
+            <!-- The build order -->
+          <xsl:variable name="position" select="position()"/>
+          <xsl:variable name="order">
+            <xsl:choose>
+              <xsl:when test="string-length($position) = 1">
+                <xsl:text>00</xsl:text>
+                <xsl:value-of select="$position"/>
+              </xsl:when>
+              <xsl:when test="string-length($position) = 2">
+                <xsl:text>0</xsl:text>
+                <xsl:value-of select="$position"/>
+              </xsl:when>
+              <xsl:otherwise>
+                <xsl:value-of select="$position"/>
+              </xsl:otherwise>
+            </xsl:choose>
+          </xsl:variable>
+            <!-- Creating dirs and files -->
+          <exsl:document href="{$dirname}/{$order}-{$filename}" method="text">
+            <xsl:text>#!/bin/bash&#xA;set +h&#xA;set -e&#xA;&#xA;</xsl:text>
+            <!-- Set envars needed by uClibc -->
+            <xsl:if test="@id='ch-cross-tools-uclibc'">
+              <xsl:copy-of select="//sect1[@id='ch-cross-tools-toolchain']/screen"/>
+              <xsl:text>&#xA;&#xA;</xsl:text>
+            </xsl:if>
+            <xsl:if test="sect2[@role='installation']">
+              <xsl:text>cd $PKGDIR&#xA;</xsl:text>
+            </xsl:if>
+            <xsl:apply-templates select=".//para/userinput | .//screen"/>
+            <xsl:text>exit</xsl:text>
+          </exsl:document>
+        </xsl:if>
+      </xsl:otherwise>
+    </xsl:choose>
+  </xsl:template>
+
+  <xsl:template match="screen">
+    <xsl:if test="child::* = userinput and not(@role = 'nodump')">
+      <xsl:apply-templates select="userinput" mode="screen"/>
+    </xsl:if>
+  </xsl:template>
+
+  <xsl:template match="para/userinput"/>
+
+  <xsl:template match="userinput" mode="screen">
+    <xsl:choose>
+      <!-- Estandarized package formats -->
+      <xsl:when test="contains(string(),'tar.gz')">
+        <xsl:value-of select="substring-before(string(),'tar.gz')"/>
+        <xsl:text>tar.*</xsl:text>
+        <xsl:value-of select="substring-after(string(),'tar.gz')"/>
+        <xsl:text>&#xA;</xsl:text>
+      </xsl:when>
+      <!-- Select Endian level for uClibc -->
+      <xsl:when test="$endian='xbig' and contains(string(),'LITTLE_ENDIAN')"/>
+      <xsl:when test="$endian='xlittle' and contains(string(),'BIG_ENDIAN')"/>
+      <!-- Setting $LANG for /etc/profile -->
+      <xsl:when test="ancestor::sect1[@id='ch-scripts-profile'] and
+                contains(string(),'export LANG=')">
+        <xsl:value-of select="substring-before(string(),'export LANG=')"/>
+        <xsl:text>export LANG=</xsl:text>
+        <xsl:value-of select="$lang"/>
+        <xsl:value-of select="substring-after(string(),'charmap]')"/>
+        <xsl:text>&#xA;</xsl:text>
+      </xsl:when>
+      <!-- Compile the keymap into the kernel has been disabled -->
+      <xsl:when test="contains(string(),'defkeymap')"/>
+      <!-- Copying the kernel config file -->
+      <xsl:when test="string() = 'make mrproper'">
+        <xsl:text>make mrproper&#xA;</xsl:text>
+        <xsl:text>cp -v ../kernel-config .config&#xA;</xsl:text>
+      </xsl:when>
+      <!-- No interactive commands are needed if the .config file is the proper one -->
+      <xsl:when test="contains(string(),'menuconfig')"/>
+      <!-- Don't stop on strip run -->
+      <xsl:when test="contains(string(),'strip ')">
+        <xsl:apply-templates/>
+        <xsl:text> || true&#xA;</xsl:text>
+      </xsl:when>
+      <!-- The rest of commands -->
+      <xsl:otherwise>
+        <xsl:apply-templates/>
+        <xsl:text>&#xA;</xsl:text>
+      </xsl:otherwise>
+    </xsl:choose>
+  </xsl:template>
+
+  <xsl:template match="replaceable">
+    <xsl:choose>
+      <xsl:when test="ancestor::sect1[@id='ch-cross-tools-glibc']">
+        <xsl:value-of select="$timezone"/>
+      </xsl:when>
+      <xsl:when test="ancestor::sect1[@id='ch-cross-tools-groff'] or
+                      ancestor::sect1[@id='ch-system-groff']">
+        <xsl:value-of select="$page"/>
+      </xsl:when>
+      <xsl:otherwise>
+        <xsl:text>**EDITME</xsl:text>
+        <xsl:apply-templates/>
+        <xsl:text>EDITME**</xsl:text>
+      </xsl:otherwise>
+    </xsl:choose>
+  </xsl:template>
+
+</xsl:stylesheet>

CLFS3/master.sh

@@ -0,0 +1,586 @@
+#!/bin/bash
+# $Id$
+
+###################################
+###          FUNCTIONS          ###
+###################################
+
+
+#----------------------------#
+host_prep_Makefiles() {      # Initialization of the system
+#----------------------------#
+  local   CLFS_HOST
+
+  echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
+
+  # defined here, only for ease of reading
+  CLFS_HOST="$(echo $MACHTYPE | sed "s/$(echo $MACHTYPE | cut -d- -f2)/cross/")"
+(
+cat << EOF
+
+025-addinguser:
+	@\$(call echo_message, Building)
+	@if [ ! -d \$(LUSER_HOME) ]; then \\
+		groupadd \$(LGROUP); \\
+		useradd -s /bin/bash -g \$(LGROUP) -m -k /dev/null \$(LUSER); \\
+	else \\
+		touch luser-exist; \\
+	fi;
+	@\$(call housekeeping)
+
+026-settingenvironment:  025-addinguser
+	@\$(call echo_message, Building)
+	@if [ -f \$(LUSER_HOME)/.bashrc -a ! -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
+		mv \$(LUSER_HOME)/.bashrc \$(LUSER_HOME)/.bashrc.XXX; \\
+	fi;
+	@if [ -f \$(LUSER_HOME)/.bash_profile  -a ! -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
+		mv \$(LUSER_HOME)/.bash_profile \$(LUSER_HOME)/.bash_profile.XXX; \\
+	fi;
+	@echo "set +h" > \$(LUSER_HOME)/.bashrc && \\
+	echo "umask 022" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "CLFS=\$(MOUNT_PT)" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "LC_ALL=POSIX" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "PATH=\$(MOUNT_PT)/cross-tools/bin:/bin:/usr/bin" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "export CLFS LC_ALL PATH" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "unset CFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "unset CXXFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "export CLFS_TARGET=\"${TARGET}\"" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "export CLFS_MIPS_LEVEL=\"${MIPS_LEVEL}\"" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "export BUILD=\"${ABI}\"" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "source $JHALFSDIR/envars" >> \$(LUSER_HOME)/.bashrc
+	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bashrc && \\
+	touch envars && \\
+	chown \$(LUSER):\$(LGROUP) envars
+	@\$(call housekeeping)
+
+027-create-directories: 026-settingenvironment
+	@\$(call echo_message, Building)
+
+	@mkdir -p \$(MOUNT_PT)/{bin,boot,dev,{etc/,}opt,home,lib,mnt}
+	@mkdir -p \$(MOUNT_PT)/{proc,media/{floppy,cdrom},sbin,srv,sys}
+	@mkdir -p \$(MOUNT_PT)/var/{lock,log,mail,run,spool}
+	@mkdir -p \$(MOUNT_PT)/var/{opt,cache,lib/{misc,locate},local}
+	@install -d -m 0750 \$(MOUNT_PT)/root
+	@install -d -m 1777 \$(MOUNT_PT){/var,}/tmp
+	@mkdir -p \$(MOUNT_PT)/usr/{,local/}{bin,include,lib,sbin,src}
+	@mkdir -p \$(MOUNT_PT)/usr/{,local/}share/{doc,info,locale,man}
+	@mkdir -p \$(MOUNT_PT)/usr/{,local/}share/{misc,terminfo,zoneinfo}
+	@mkdir -p \$(MOUNT_PT)/usr/{,local/}share/man/man{1,2,3,4,5,6,7,8}
+	@for dir in \$(MOUNT_PT)/usr{,/local}; do \\
+	  ln -s share/{man,doc,info} \$\$dir ; \\
+	done
+	@\$(call housekeeping)
+
+028-creating-sysfile: 027-create-directories
+	@\$(call echo_message, Building)
+
+	@touch \$(MOUNT_PT)/etc/mtab
+	@echo "root::0:0:root:/root:/bin/ash" >> \$(MOUNT_PT)/etc/passwd
+	@echo "root:x:0:" >> \$(MOUNT_PT)/etc/group
+	@echo "bin:x:1:"  >> \$(MOUNT_PT)/etc/group
+	@echo "sys:x:2:"  >> \$(MOUNT_PT)/etc/group
+	@echo "kmem:x:3"  >> \$(MOUNT_PT)/etc/group
+	@echo "tty:x:4:"  >> \$(MOUNT_PT)/etc/group
+	@echo "tape:x:5:"   >> \$(MOUNT_PT)/etc/group
+	@echo "daemon:x:6:" >> \$(MOUNT_PT)/etc/group
+	@echo "floppy:x:7:" >> \$(MOUNT_PT)/etc/group
+	@echo "disk:x:8:"   >> \$(MOUNT_PT)/etc/group
+	@echo "lp:x:9:"     >> \$(MOUNT_PT)/etc/group
+	@echo "dialout:x:10:" >> \$(MOUNT_PT)/etc/group
+	@echo "audio:x:11:"   >> \$(MOUNT_PT)/etc/group
+	@echo "video:x:12:"   >> \$(MOUNT_PT)/etc/group
+	@echo "utmp:x:13:"    >> \$(MOUNT_PT)/etc/group
+	@echo "usb:x:14:"     >> \$(MOUNT_PT)/etc/group
+	@echo "cdrom:x:15:"   >> \$(MOUNT_PT)/etc/group
+
+	@touch \$(MOUNT_PT)/var/run/utmp \$(MOUNT_PT)/var/log/{btmp,lastlog,wtmp}
+	@chmod 664 \$(MOUNT_PT)/var/run/utmp \$(MOUNT_PT)/var/log/lastlog
+	@chown -R \$(LUSER) \$(MOUNT_PT) && \\
+	chmod -R a+w \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
+	chmod -R a+w \$(SRCSDIR)
+	@\$(call housekeeping)
+
+EOF
+) >> $MKFILE.tmp
+
+  host_prep=" 025-addinguser 026-settingenvironment 027-create-directories 028-creating-sysfile"
+}
+
+#-----------------------------#
+systemprep_Makefiles() {      #
+#-----------------------------#
+  echo "${tab_}${GREEN}Processing... ${L_arrow}system prep tools     ( LUSER ) ${R_arrow}"
+
+  for file in systemprep/* ; do
+    # Keep the script file name
+    this_script=`basename $file`
+
+    # Set the dependency for the first target.
+    if [ -z $PREV ] ; then PREV=028-creating-sysfile ; fi
+
+    # First append each name of the script files to a list (this will become
+    # the names of the targets in the Makefile)
+    cross_tools="$cross_tools $this_script"
+
+    # Grab the name of the target (minus the -headers or -cross in the case of gcc
+    # and binutils in chapter 5)
+    name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'`
+
+    pkg_tarball=$(get_package_tarball_name $name)
+    #--------------------------------------------------------------------#
+    #         >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<<          #
+    #--------------------------------------------------------------------#
+    #
+    # Drop in the name of the target on a new line, and the previous target
+    # as a dependency. Also call the echo_message function.
+    LUSER_wrt_target "${this_script}" "$PREV"
+    #
+    # If $pkg_tarball isn't empty, we've got a package...
+    if [ "$pkg_tarball" != "" ] ; then
+       LUSER_wrt_unpack "$pkg_tarball"
+    fi
+    #
+    LUSER_wrt_RunAsUser "${file}"
+    #
+    [[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
+    #
+    # Include a touch of the target name so make can check if it's already been made.
+    wrt_touch
+    #
+    #--------------------------------------------------------------------#
+    #              >>>>>>>> END OF Makefile ENTRY <<<<<<<<               #
+    #--------------------------------------------------------------------#
+    #
+    # Keep the script file name for Makefile dependencies.
+    PREV=$this_script
+
+  done # for file in ....
+}
+
+
+#-----------------------------#
+cross_tools_Makefiles() {     #
+#-----------------------------#
+  echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools     ( LUSER ) ${R_arrow}"
+
+  for file in cross-tools/* ; do
+    # Keep the script file name
+    this_script=`basename $file`
+    #
+    # Skip this script...
+    # NOTE.. the book indicated you only needed to install groff or file if the host
+    #   had older versions. The packages would be installed in the target directory
+    #   and not the host.
+    case $this_script in
+      *cflags* | *variables* | *abi | *toolchain*)  # work done in host_prep_Makefiles
+              continue ;;
+      *) ;;
+    esac
+
+    #
+    # Set the dependency for the first target.
+    if [ -z $PREV ] ; then PREV=028-creating-sysfile ; fi
+
+    # First append each name of the script files to a list (this will become
+    # the names of the targets in the Makefile)
+    cross_tools="$cross_tools $this_script"
+
+    # Grab the name of the target (minus the -headers or -cross in the case of gcc
+    # and binutils in chapter 5)
+    name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' \
+                                  -e 's@-static@@' \
+                                  -e 's@-final@@' \
+				  -e 's@-64@@' \
+                                  -e 's@-n32@@'`
+    case $name in
+      uclibc*) name="uClibc" ;;
+    esac
+    pkg_tarball=$(get_package_tarball_name $name)
+    #--------------------------------------------------------------------#
+    #         >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<<          #
+    #--------------------------------------------------------------------#
+    #
+    # Drop in the name of the target on a new line, and the previous target
+    # as a dependency. Also call the echo_message function.
+    LUSER_wrt_target "${this_script}" "$PREV"
+    #
+    # If $pkg_tarball isn't empty, we've got a package...
+    if [ "$pkg_tarball" != "" ] ; then
+       LUSER_wrt_unpack "$pkg_tarball"
+      # Touch timestamp file if installed files logs will be created.
+      if [ "${INSTALL_LOG}" = "y" ] ; then
+        LUSER_wrt_TouchTimestamp
+      fi
+       # If using optimizations, write the instructions
+       [[ "$OPTIMIZE" != "0" ]] &&  wrt_optimize "$name" && wrt_makeflags "$name"
+    fi
+    #
+    LUSER_wrt_RunAsUser "${file}"
+    #
+    # Write installed files log and remove the build directory(ies)
+    # except if the package build fails.
+    if [ "$pkg_tarball" != "" ] ; then
+      LUSER_RemoveBuildDirs "${name}"
+      if [ "${INSTALL_LOG}" = "y" ] ; then
+        LUSER_wrt_LogNewFiles "$name"
+      fi
+    fi
+    #
+    # Include a touch of the target name so make can check if it's already been made.
+    wrt_touch
+    #
+    #--------------------------------------------------------------------#
+    #              >>>>>>>> END OF Makefile ENTRY <<<<<<<<               #
+    #--------------------------------------------------------------------#
+    #
+    # Keep the script file name for Makefile dependencies.
+    PREV=$this_script
+
+  done # for file in ....
+}
+
+
+
+#-----------------------------#
+final_system_Makefiles() {    #
+#-----------------------------#
+  echo "${tab_}${GREEN}Processing... ${L_arrow}final system    ( LUSER ) ${R_arrow}"
+
+  for file in final-system/* ; do
+    # Keep the script file name
+    this_script=`basename $file`
+
+    # Grab the name of the target, strip id number, XXX-script
+    name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' \
+                                  -e 's@temp-@@' \
+                                  -e 's@-64bit@@' \
+                                  -e 's@-64@@' \
+                                  -e 's@64@@' \
+                                  -e 's@n32@@'`
+
+    # Find the version of the command files, if it corresponds with the building of
+    # a specific package.
+    pkg_tarball=$(get_package_tarball_name $name)
+
+    # Append each name of the script files to a list (this will become
+    # the names of the targets in the Makefile
+    basicsystem="$basicsystem ${this_script}"
+
+    #--------------------------------------------------------------------#
+    #         >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<<          #
+    #--------------------------------------------------------------------#
+    #
+    # Drop in the name of the target on a new line, and the previous target
+    # as a dependency. Also call the echo_message function.
+    LUSER_wrt_target "${this_script}" "$PREV"
+    #
+    # If $pkg_tarball isn't empty, we've got a package...
+    if [ "$pkg_tarball" != "" ] ; then
+      # Touch timestamp file if installed files logs will be created.
+      if [ "${INSTALL_LOG}" = "y" ] ; then
+        LUSER_wrt_TouchTimestamp
+      fi
+      LUSER_wrt_unpack "$pkg_tarball"
+      # If using optimizations, write the instructions
+      [[ "$OPTIMIZE" != "0" ]] &&  wrt_optimize "$name" && wrt_makeflags "$name"
+    fi
+    #
+    LUSER_wrt_RunAsUser "${file}"
+    #
+    # Write installed files log and remove the build directory(ies)
+    # except if the package build fails.
+    if [ "$pkg_tarball" != "" ] ; then
+      LUSER_RemoveBuildDirs "${name}"
+      if [ "${INSTALL_LOG}" = "y" ] ; then
+        LUSER_wrt_LogNewFiles "$name"
+      fi
+    fi
+    #
+    # Include a touch of the target name so make can check if it's already been made.
+    wrt_touch
+    #
+    #--------------------------------------------------------------------#
+    #              >>>>>>>> END OF Makefile ENTRY <<<<<<<<               #
+    #--------------------------------------------------------------------#
+    #
+    # Keep the script file name for Makefile dependencies.
+    PREV=${this_script}
+  done  # for file in final-system/* ...
+}
+
+
+
+#-----------------------------#
+bootscripts_Makefiles() {     #
+#-----------------------------#
+  echo "${tab_}${GREEN}Processing... ${L_arrow}bootscripts     ( LUSER ) ${R_arrow}"
+
+  for file in bootscripts/* ; do
+    # Keep the script file name
+    this_script=`basename $file`
+
+    case $this_script in
+      *console*) continue ;; # Use the files that came with the bootscripts
+      *network*) continue ;; # Manually create these files
+      *)  ;;
+    esac
+
+    # First append each name of the script files to a list (this will become
+    # the names of the targets in the Makefile
+    bootscripttools="$bootscripttools $this_script"
+
+    # Grab the name of the target, strip id number, XXX-script
+    name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'\
+                                  -e 's@-64bit@@' \
+                                  -e 's@-64@@' \
+                                  -e 's@64@@' \
+                                  -e 's@n32@@'`
+    case $name in
+      *bootscripts*) name=clfs-embedded-bootscripts ;;
+    esac
+
+    pkg_tarball=$(get_package_tarball_name $name)
+
+    #--------------------------------------------------------------------#
+    #         >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<<          #
+    #--------------------------------------------------------------------#
+    #
+    # Drop in the name of the target on a new line, and the previous target
+    # as a dependency. Also call the echo_message function.
+    LUSER_wrt_target "${this_script}" "$PREV"
+    #
+    # If $pkg_tarball isn't empty, we've got a package...
+    if [ "$pkg_tarball" != "" ] ; then
+      LUSER_wrt_unpack "$pkg_tarball"
+      if [ "${INSTALL_LOG}" = "y" ] ; then
+        LUSER_wrt_TouchTimestamp
+      fi
+    fi
+    #
+    LUSER_wrt_RunAsUser "${file}"
+    #
+    if [ "$pkg_tarball" != "" ] ; then
+      LUSER_RemoveBuildDirs "${name}"
+      if [ "${INSTALL_LOG}" = "y" ] ; then
+        LUSER_wrt_LogNewFiles "$name"
+      fi
+    fi
+    #
+    # Include a touch of the target name so make can check if it's already been made.
+    wrt_touch
+    #
+    #--------------------------------------------------------------------#
+    #              >>>>>>>> END OF Makefile ENTRY <<<<<<<<               #
+    #--------------------------------------------------------------------#
+    #
+    # Keep the script file name for Makefile dependencies.
+    PREV=$this_script
+
+  done  # for file in bootscripts/* ...
+
+}
+
+
+#-----------------------------#
+bootable_Makefiles() {        #
+#-----------------------------#
+  echo "${tab_}${GREEN}Processing... ${L_arrow}make bootable   ( LUSER ) ${R_arrow}"
+
+  for file in bootable/* ; do
+    # Keep the script file name
+    this_script=`basename $file`
+
+    # A little housekeeping on the scripts
+    case $this_script in
+      *grub | *aboot | *colo | *silo | *arcload | *lilo | *reboot* )  continue ;;
+      *fstab)  [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
+      *kernel) # if there is no kernel config file do not build the kernel
+               [[ -z $CONFIG ]] && continue
+                 # Copy the config file to /sources with a standardized name
+               cp $CONFIG $BUILDDIR/sources/kernel-config
+        ;;
+    esac
+    #
+    # First append each name of the script files to a list (this will become
+    # the names of the targets in the Makefile
+    # NOTE: new makfile format forces the last script, *chowning, into a separate
+    #  phase.
+    case ${this_script} in
+      *chowning) chowning=${this_script}   ;;
+              *) bootable="$bootable $this_script"  ;;
+    esac
+    #
+    # Grab the name of the target, strip id number and misc words.
+    name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
+    case $this_script in
+      *kernel*) name=linux
+       ;;
+    esac
+
+    pkg_tarball=$(get_package_tarball_name $name)
+
+    #--------------------------------------------------------------------#
+    #         >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<<          #
+    #--------------------------------------------------------------------#
+    #
+    # Drop in the name of the target on a new line, and the previous target
+    # as a dependency. Also call the echo_message function.
+    LUSER_wrt_target "${this_script}" "$PREV"
+    #
+    # If $pkg_tarball isn't empty, we've got a package...
+    if [ "$pkg_tarball" != "" ] ; then
+      LUSER_wrt_unpack "$pkg_tarball"
+      if [ "${INSTALL_LOG}" = "y" ] ; then
+        LUSER_wrt_TouchTimestamp
+      fi
+    fi
+    #
+    # Select a script execution method
+    case $this_script in
+      *fstab*)  if [[ -n "$FSTAB" ]]; then
+                  LUSER_wrt_CopyFstab
+                else
+                  LUSER_wrt_RunAsUser "${file}"
+                fi
+          ;;
+      *chowning)  wrt_RunAsRoot "${file}"
+          ;;
+              *)  LUSER_wrt_RunAsUser "${file}"
+          ;;
+    esac
+    #
+    # Housekeeping...remove any build directory(ies) except if the package build fails.
+    if [ "$pkg_tarball" != "" ] ; then
+      LUSER_RemoveBuildDirs "${name}"
+      if [ "${INSTALL_LOG}" = "y" ] ; then
+        LUSER_wrt_LogNewFiles "$name"
+      fi
+    fi
+    #
+    # Include a touch of the target name so make can check if it's already been made.
+    wrt_touch
+    #
+    #--------------------------------------------------------------------#
+    #              >>>>>>>> END OF Makefile ENTRY <<<<<<<<               #
+    #--------------------------------------------------------------------#
+    #
+    # Keep the script file name for Makefile dependencies.
+    PREV=$this_script
+
+  done
+
+}
+
+
+#-----------------------------#
+build_Makefile() {            # Construct a Makefile from the book scripts
+#-----------------------------#
+  echo "Creating Makefile... ${BOLD}START${OFF}"
+
+  cd $JHALFSDIR/${PROGNAME}-commands
+  # Start with a clean Makefile.tmp file
+  >$MKFILE.tmp
+
+  host_prep_Makefiles
+  [[ "${PLATFORM% -*}" = "WRT" ]] && systemprep_Makefiles # $cross_tools
+  cross_tools_Makefiles            # $cross_tools
+  final_system_Makefiles           # $basicsystem
+  bootscripts_Makefiles            # $bootscripttools
+  bootable_Makefiles               # $bootable
+  # Add the CUSTOM_TOOLS targets, if needed
+  [[ "$CUSTOM_TOOLS" = "y" ]] && wrt_CustomTools_target
+
+  # Add a header, some variables and include the function file
+  # to the top of the real Makefile.
+  wrt_Makefile_header
+
+  # Drop in the main target 'all:' and the chapter targets with each sub-target
+  # as a dependency.
+(
+cat << EOF
+
+all:	ck_UID mk_SETUP mk_LUSER create-sbu_du-report mk_CUSTOM_TOOLS mk_ROOT
+	@sudo make restore-luser-env
+	@sudo make do-housekeeping
+	@\$(call echo_finished,$VERSION)
+
+ck_UID:
+	@if [ \`id -u\` = "0" ]; then \\
+	  echo "--------------------------------------------------"; \\
+	  echo "You cannot run this makefile from the root account"; \\
+	  echo "--------------------------------------------------"; \\
+	  exit 1; \\
+	fi
+
+mk_SETUP:
+	@\$(call echo_SU_request)
+	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
+	@touch \$@
+
+mk_LUSER: mk_SETUP
+	@\$(call echo_SULUSER_request)
+	@(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) LUSER" )
+	@touch \$@
+
+mk_CUSTOM_TOOLS: create-sbu_du-report
+	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
+	  \$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
+	  (sudo \$(SU_LUSER) "mkdir -p $BUILDDIR$TRACKING_DIR"); \\
+	  (sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS"); \\
+	fi;
+	@touch \$@
+
+mk_ROOT:
+	@\$(call echo_SU_request)
+	@echo "$VERSION-embedded - jhalfs build" > clfs-release && \\
+	sudo mv clfs-release \$(MOUNT_PT)/etc
+	@sudo make BREAKPOINT=\$(BREAKPOINT) ROOT
+	@touch \$@
+
+
+SETUP:        $host_prep
+LUSER:	      $cross_tools $basicsystem $bootscripttools $bootable
+CUSTOM_TOOLS: $custom_list
+ROOT:	      $chowning
+
+
+create-sbu_du-report:  mk_LUSER
+	@\$(call echo_message, Building)
+	@if [ "\$(ADD_REPORT)" = "y" ]; then \\
+	  ./create-sbu_du-report.sh logs $VERSION; \\
+	  \$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
+	fi;
+	@touch  \$@
+
+restore-luser-env:
+	@\$(call echo_message, Building)
+	@if [ -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
+		mv -f \$(LUSER_HOME)/.bashrc.XXX \$(LUSER_HOME)/.bashrc; \\
+	fi;
+	@if [ -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
+		mv \$(LUSER_HOME)/.bash_profile.XXX \$(LUSER_HOME)/.bash_profile; \\
+	fi;
+	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bash* && \\
+	touch \$@ && \\
+	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
+	echo --------------------------------------------------------------------------------\$(WHITE)
+
+do-housekeeping:
+	@-if [ ! -f luser-exist ]; then \\
+		userdel \$(LUSER); \\
+		rm -rf \$(LUSER_HOME); \\
+	fi;
+
+EOF
+) >> $MKFILE
+
+  # Bring over the items from the Makefile.tmp
+  cat $MKFILE.tmp >> $MKFILE
+  rm $MKFILE.tmp
+  echo "Creating Makefile... ${BOLD}DONE${OFF}"
+
+}
+

FUNCTION_LIST

@@ -1,282 +0,0 @@
-This is the list of functions used in jhalfs, excluding BLFS tool functions
-and functions defined in {C,H}LFS/master.sh.
-I felt the need for documenting it when trying to add package management.
-Functions are listed in alphabetical order, with a short description and the
-file where they are defined.
-
---------------------------------------------------------------------------
-install_blfs_tools():
-From common/libs/func_install_blfs.
-Description: Copy the needed files to `BLFS_ROOT'. Initialize
-the package tracking. Generates a `configuration' file from
-the tool dependencies settings, and use it to generate
-scriptlets from the blfs book. Uses those scriptlets to download the
-needed tarballs. Then generates a Makefile for building the dependencies.
-Called by: jhalfs
---------------------------------------------------------------------------
-get_sources():
-From common/libs/func_download_pkgs.
-Description:  Downloads packages if `GETPKG' is `y'. Writes package name
-and md5 checksum to `MISSING_FILES.DMP' if a package cannot be found in
-`$SRC_ARCHIVE' and cannot be downloaded, or if md5 checksum does not agree
-book's one. If `MISSING_FILES.DMP' is not empty at the end of the process,
-disable the excution of the makefile.
-Actually, if `$BUILDDIR/sources' does not exist, it is not created if
-`GETPKG' is `n'. And an empty or non existent `$BUILDDIR/sources' is
-not flagged...
-If `GETPKG' is `y', removes `MD5SUMS', `MISSING_FILES.DMP', and `urls.lst'
-from `$BUILDDIR/sources' and generates them in the course of the process.
-Called by: get_book and extract_commands
---------------------------------------------------------------------------
-gs_wrt_message():
-From common/libs/func_download_pkgs.
-Description: internal function in get_sources. Writes a message to the screen
-and a package name to `MISSING_FILES.DMP'.
---------------------------------------------------------------------------
-create_urls():
-From common/libs/func_download_pkgs.
-Description: Runs xsltproc with stylesheet urls.xsl on chapter 3 of the
-book. Add BLFS dependencies and custom dependencies if `BLFS_TOOLS' is `y'
-and `CUSTOM_TOOLS' is `y' respectively.
-Called by: get_sources
---------------------------------------------------------------------------
-wrt_CustomTools_target():
-From common/libs/func_custom_pkgs.
-Description:  Add users supplied scripts to `$JHALFSDIR/custom-tools', with
-corresponding entry in the Makefile.
-TODO: Add package management (instructions to user and Makefile entry)
-Called by: All master.sh `build_Makefile'.
---------------------------------------------------------------------------
-add_CustomToolsURLS():
-From common/libs/func_custom_pkgs.
-Description:  Add any users supplied scripts URL information to urls.lst
-Called by: create_urls
---------------------------------------------------------------------------
-wrt_Makefile_header():
-From common/libs/func_wrt_Makefile.
-Description: Writes the beginning of the Makefile into $MKFILE, which created
-or erased before.
-Called by: All master.sh `build_Makefile'.
---------------------------------------------------------------------------
-get_package_tarball_name():
-From common/libs/func_wrt_Makefile.
-Arguments: $1 contains the script_name
-Description: Retrieves the tarball name from `pkg_tarball_list' by comparing
-script-name to the beginning of a line in the list. Writes the name found
-to stdout.
-Implements the behavior described in README.CUSTOM, that is, if script_name
-begins with d-, strip that part.
-Called by: various functions in master.sh
---------------------------------------------------------------------------
-LUSER_wrt_target():
-From common/libs/func_wrt_Makefile.
-Arguments: $1 contains target name; $2 contains dependency(ies)
-Description:  Add lines in the Makefile, which create target and
-initialize log file.
-LUSER version uses $MOUNT_PT in absolute path names.
-Called by: chapter5_Makefiles and chapter6_Makefiles in LFS/master.sh
-and other master.sh
---------------------------------------------------------------------------
-CHROOT_wrt_target():
-From common/libs/func_wrt_Makefile.
-Arguments: $1 contains target name; $2 contains dependency(ies)
-Description:  Add lines in the Makefile, which create target and
-initialize log file.
-CHROOT version uses / in absolute path names.
-Called by: chapter6_Makefiles and chapter78_Makefiles in LFS/master.sh
-and other functions in other master.sh
---------------------------------------------------------------------------
-LUSER_wrt_unpack():
-From common/libs/func_wrt_Makefile.
-Arguments: $1 contains tarball name; $2 contains 1 if the existing directory
-is to be presserved.
-Description: Add lines in the Makefile, which unpack and set 'ROOT' var and
-remove existing dir if $2 != 1
-LUSER version uses $MOUNT_PT in absolute path names.
-Uses: Makefile functions remove_existing_dirs, unpack, get_pkg_root.
---------------------------------------------------------------------------
-CHROOT_Unpack():
-From common/libs/func_wrt_Makefile.
-Arguments: $1 contains tarball name; $2 contains 1 if the existing directory
-is to be presserved.
-Description: Add lines in the Makefile, which unpack and set 'ROOT' var and
-remove existing dir if $2 != 1
-CHROOT version uses / in absolute path names.
-Uses: Makefile functions remove_existing_dirs2, unpack2, get_pkg_root2.
---------------------------------------------------------------------------
-LUSER_wrt_test_log():
-From common/libs/func_wrt_Makefile.
-Description:  Add lines in the Makefile, which initialize testsuite
-log file.
-LUSER version uses $MOUNT_PT in absolute path names.
---------------------------------------------------------------------------
-CHROOT_wrt_test_log():
-From common/libs/func_wrt_Makefile.
-Description:  Add lines in the Makefile, which initialize testsuite
-log file.
-CHROOT version uses / in absolute path names.
---------------------------------------------------------------------------
-wrt_RunAsRoot():
-From common/libs/func_wrt_Makefile.
-Description:  Some scripts must be run as root..
---------------------------------------------------------------------------
-LUSER_wrt_RunAsUser():
-From common/libs/func_wrt_Makefile.
-Description:  Calculate time with perl, footer to log file
---------------------------------------------------------------------------
-CHROOT_wrt_RunAsRoot():
-From common/libs/func_wrt_Makefile.
-Description:
---------------------------------------------------------------------------
-LUSER_wrt_CopyFstab():
-From common/libs/func_wrt_Makefile.
-Description:
---------------------------------------------------------------------------
-CHROOT_wrt_CopyFstab():
-From common/libs/func_wrt_Makefile.
-Description:
---------------------------------------------------------------------------
-LUSER_wrt_TouchTimestamp():
-From common/libs/func_wrt_Makefile.
-Description:
---------------------------------------------------------------------------
-CHROOT_wrt_TouchTimestamp():
-From common/libs/func_wrt_Makefile.
-Description:
---------------------------------------------------------------------------
-LUSER_wrt_LogNewFiles():
-From common/libs/func_wrt_Makefile.
-Description:
---------------------------------------------------------------------------
-CHROOT_wrt_LogNewFiles():
-From common/libs/func_wrt_Makefile.
-Description:
---------------------------------------------------------------------------
-LUSER_RemoveBuildDirs():
-From common/libs/func_wrt_Makefile.
-Description:
---------------------------------------------------------------------------
-CHROOT_wrt_RemoveBuildDirs():
-From common/libs/func_wrt_Makefile.
-Description:
---------------------------------------------------------------------------
-wrt_touch():
-From common/libs/func_wrt_Makefile.
-Description:
---------------------------------------------------------------------------
-wrt_compare_targets():
-From common/libs/func_compare.sh.
-Description:
---------------------------------------------------------------------------
-wrt_system_build():
-From common/libs/func_compare.sh.
-Description:
---------------------------------------------------------------------------
-wrt_compare_work():
-From common/libs/func_compare.sh.
-Description:
---------------------------------------------------------------------------
-wrt_do_ica_work():
-From common/libs/func_compare.sh.
-Description:
---------------------------------------------------------------------------
-wrt_logs():
-From common/libs/func_compare.sh.
-Description:
---------------------------------------------------------------------------
-validate_config():
-From common/libs/func_validate_configs.sh.
-Description:  Are the config values sane (within reason)
---------------------------------------------------------------------------
-  write_error_and_die():
-From common/libs/func_validate_configs.sh.
-Description:
---------------------------------------------------------------------------
-  validate_file():
-From common/libs/func_validate_configs.sh.
-Description:
---------------------------------------------------------------------------
-  validate_dir():
-From common/libs/func_validate_configs.sh.
-Description:
---------------------------------------------------------------------------
-get_book():
-From common/libs/func_book_parser.
-Description:
---------------------------------------------------------------------------
-extract_commands():
-From common/libs/func_book_parser.
-Description:
---------------------------------------------------------------------------
-create_package_list():
-From common/libs/func_book_parser.
-Description:
---------------------------------------------------------------------------
-check_version():
-From common/libs/func_check_version.sh.
-Description:
---------------------------------------------------------------------------
-  write_error_and_die():
-From common/libs/func_check_version.sh.
-Description:
---------------------------------------------------------------------------
-check_prerequisites():
-From common/libs/func_check_version.sh.
-Description:
---------------------------------------------------------------------------
-write_or_exit():
-From common/progress_bar.sh.
-Description:
---------------------------------------------------------------------------
-no_empty_builddir():
-From common/common-functions.
-Description:
---------------------------------------------------------------------------
-run_make():
-From common/common-functions.
-Description:
---------------------------------------------------------------------------
-clean_builddir():
-From common/common-functions.
-Description:
---------------------------------------------------------------------------
-simple_error():
-From jhalfs.
-Description:  Basic error trap.... JUST DIE
---------------------------------------------------------------------------
-see_ya():
-From jhalfs.
-Description:
---------------------------------------------------------------------------
-chapter4_Makefiles():
-From LFS/master.sh.
-Description:
---------------------------------------------------------------------------
-chapter5_Makefiles():
-From LFS/master.sh.
-Description:
---------------------------------------------------------------------------
-chapter6_Makefiles():
-From LFS/master.sh.
-Description:
---------------------------------------------------------------------------
-chapter78_Makefiles():
-From LFS/master.sh.
-Description:
---------------------------------------------------------------------------
-build_Makefile():
-From LFS/master.sh.
-Description:
---------------------------------------------------------------------------
-validate_opt_settings():
-From optimize/optimize_functions.
-Description:  Show optimize setting and wait user agreement
---------------------------------------------------------------------------
-wrt_optimize():
-From optimize/optimize_functions.
-Description:  Apply pkg specific opt's to build
---------------------------------------------------------------------------
-wrt_makeflags():
-From optimize/optimize_functions.
-Description:  Apply MAKEFLAGS to build
---------------------------------------------------------------------------

HLFS/hlfs.xsl

@@ -0,0 +1,330 @@
+<?xml version="1.0"?>
+<!DOCTYPE xsl:stylesheet [
+ <!ENTITY % general-entities SYSTEM "FAKEDIR/general.ent">
+  %general-entities;
+]>
+
+<!-- $Id$ -->
+
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+    xmlns:exsl="http://exslt.org/common"
+    extension-element-prefixes="exsl"
+    version="1.0">
+
+<!-- XSLT stylesheet to create shell scripts from HLFS books. -->
+
+  <!-- What libc implentation must be used? -->
+  <xsl:param name="model" select="glibc"/>
+
+  <!-- What kernel serie must be used? -->
+  <xsl:param name="kernel" select="2.6"/>
+
+  <!-- Is the host kernel using grsecurity? -->
+  <xsl:param name="grsecurity_host" select="n"/>
+
+  <!-- Run test suites?
+       0 = none
+       1 = only chapter06 Glibc, GCC and Binutils testsuites
+       2 = all chapter06 testsuites
+       3 = alias to 2
+  -->
+  <xsl:param name="testsuite" select="1"/>
+
+  <!-- Bomb on test suites failures?
+       n = no, I want to build the full system and review the logs
+       y = yes, bomb at the first test suite failure to can review the build dir
+  -->
+  <xsl:param name="bomb-testsuite" select="n"/>
+
+  <!-- Additional features -->
+  <xsl:param name="features">,ssp,aslr,pax,hardened_tmp,warnings,misc,blowfish,</xsl:param>
+
+  <!-- Time zone -->
+  <xsl:param name="timezone" select="GMT"/>
+
+  <!-- Page size -->
+  <xsl:param name="page" select="letter"/>
+
+  <!-- Locale settings -->
+  <xsl:param name="lang" select="C"/>
+
+  <xsl:template match="/">
+    <xsl:apply-templates select="//sect1"/>
+  </xsl:template>
+
+  <xsl:template match="sect1">
+    <xsl:if test="(../@id='chapter-temporary-tools' or
+                  ../@id='chapter-building-system' or
+                  ../@id='chapter-bootable') and
+                  (count(descendant::screen/userinput) &gt; 0 and
+                  count(descendant::screen/userinput) &gt;
+                  count(descendant::screen[@role='nodump'])) and
+                  ((@condition=$model or not(@condition)) and
+                  (@vendor=$kernel or not(@vendor)))">
+        <!-- The dirs names -->
+      <xsl:variable name="pi-dir" select="../processing-instruction('dbhtml')"/>
+      <xsl:variable name="pi-dir-value" select="substring-after($pi-dir,'dir=')"/>
+      <xsl:variable name="quote-dir" select="substring($pi-dir-value,1,1)"/>
+      <xsl:variable name="dirname" select="substring-before(substring($pi-dir-value,2),$quote-dir)"/>
+        <!-- The file names -->
+      <xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
+      <xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
+      <xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
+        <!-- The build order -->
+      <xsl:variable name="position" select="position()"/>
+      <xsl:variable name="order">
+        <xsl:choose>
+          <xsl:when test="string-length($position) = 1">
+            <xsl:text>00</xsl:text>
+            <xsl:value-of select="$position"/>
+          </xsl:when>
+          <xsl:when test="string-length($position) = 2">
+            <xsl:text>0</xsl:text>
+            <xsl:value-of select="$position"/>
+          </xsl:when>
+          <xsl:otherwise>
+            <xsl:value-of select="$position"/>
+          </xsl:otherwise>
+        </xsl:choose>
+      </xsl:variable>
+        <!-- Creating dirs and files -->
+      <exsl:document href="{$dirname}/{$order}-{$filename}" method="text">
+        <xsl:choose>
+          <xsl:when test="@id='ch-system-creatingdirs' or
+                    @id='ch-system-createfiles' or
+                    @id='ch-system-changingowner' or
+                    @id='ch-system-strippingagain'">
+            <xsl:text>#!/tools/bin/bash&#xA;set +h&#xA;</xsl:text>
+          </xsl:when>
+          <xsl:otherwise>
+            <xsl:text>#!/bin/bash&#xA;set +h&#xA;</xsl:text>
+          </xsl:otherwise>
+        </xsl:choose>
+        <xsl:if test="not(@id='ch-tools-stripping') and
+                      not(@id='ch-system-strippingagain')">
+          <xsl:text>set -e&#xA;</xsl:text>
+        </xsl:if>
+        <xsl:text>&#xA;</xsl:text>
+        <xsl:if test="(sect2[@role='installation'])">
+          <xsl:text>cd $PKGDIR&#xA;</xsl:text>
+          <xsl:if test="@id='ch-system-uclibc'">
+             <xsl:text>pushd ../; tar -xvf gettext-&gettext-version;.*; popd; &#xA;</xsl:text>
+          </xsl:if>
+          <!-- SVN toolchain format, from inside ./sources dir unpack binutils and gcc -->
+          <xsl:if test="@id='ch-tools-embryo-toolchain' or
+                        @id='ch-tools-cocoon-toolchain' or
+                        @id='ch-system-butterfly-toolchain'">
+             <xsl:text>tar -xvf gcc-core-&gcc-version;.*; &#xA;</xsl:text>
+             <xsl:text>tar -xvf binutils-&binutils-version;.*; &#xA;</xsl:text>
+          </xsl:if>
+          <xsl:if test="@id='ch-tools-cocoon-toolchain' or
+                        @id='ch-system-butterfly-toolchain'">
+             <xsl:text>tar -xvf gcc-g++-&gcc-version;.*; &#xA;</xsl:text>
+          </xsl:if>
+          <!-- ONLY butterfly has a testsuite -->
+          <xsl:if test="@id='ch-system-butterfly-toolchain' and $testsuite != '0'">
+            <xsl:text>tar -xvf gcc-testsuite-&gcc-version;.*; &#xA;</xsl:text>
+          </xsl:if>
+          <!-- END SVN toolchain format -->
+        </xsl:if>
+        <xsl:apply-templates select=".//para/userinput | .//screen"/>
+        <xsl:if test="not(@id='ch-system-chroot') and
+                      not(@id='ch-system-revisedchroot')">
+          <xsl:text>echo -e "\n\nTotalseconds: $SECONDS\n"&#xA;</xsl:text>
+        </xsl:if>
+        <xsl:text>exit</xsl:text>
+      </exsl:document>
+    </xsl:if>
+  </xsl:template>
+
+  <xsl:template match="screen">
+    <xsl:if test="(@condition=$model or not(@condition)) and
+                  (@vendor=$kernel or not(@vendor)) and
+                  child::* = userinput and (not(@role) or
+                  (@role and contains($features,concat(',',@role,','))))">
+      <xsl:apply-templates select="userinput" mode="screen"/>
+    </xsl:if>
+  </xsl:template>
+
+  <xsl:template match="para/userinput">
+    <xsl:if test="(contains(string(),'test') or
+                  contains(string(),'check')) and
+                  ($testsuite = '2' or $testsuite = '3')">
+      <xsl:choose>
+        <xsl:when test="$bomb-testsuite = 'n'">
+          <xsl:value-of select="substring-before(string(),'make')"/>
+          <xsl:text>make -k</xsl:text>
+          <xsl:value-of select="substring-after(string(),'make')"/>
+          <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
+        </xsl:when>
+        <xsl:otherwise>
+          <xsl:apply-templates/>
+          <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1</xsl:text>
+          <xsl:if test="contains(string(),' -k ')">
+            <xsl:text> || true</xsl:text>
+          </xsl:if>
+          <xsl:text>&#xA;</xsl:text>
+        </xsl:otherwise>
+      </xsl:choose>
+    </xsl:if>
+  </xsl:template>
+
+  <xsl:template match="userinput" mode="screen">
+    <xsl:choose>
+      <!-- grsecurity kernel in the host? -->
+      <xsl:when test="ancestor::sect1[@id='ch-system-kernfs'] and
+                contains(string(),'sysctl')
+                and $grsecurity_host ='n'"/>
+      <!-- Setting $LANG for /etc/profile -->
+      <xsl:when test="ancestor::sect1[@id='bootable-profile'] and
+                contains(string(),'export LANG=')">
+        <xsl:value-of select="substring-before(string(),'export LANG=')"/>
+        <xsl:text>export LANG=</xsl:text>
+        <xsl:value-of select="$lang"/>
+        <xsl:value-of select="substring-after(string(),'CC]')"/>
+        <xsl:text>&#xA;</xsl:text>
+      </xsl:when>
+      <!-- Copying the kernel config file -->
+      <xsl:when test="string() = 'make mrproper'">
+        <xsl:text>make mrproper&#xA;</xsl:text>
+        <xsl:text>cp -v /sources/kernel-config .config&#xA;</xsl:text>
+      </xsl:when>
+      <!-- No interactive commands are needed if the .config file is the proper one -->
+      <xsl:when test="string() = 'make menuconfig'"/>
+      <!-- For uClibc we need to set CONFIG_SITE -->
+      <xsl:when test="contains(string(),'CONFIG_SITE')">
+        <xsl:value-of select="substring-before(string(),'export')"/>
+        <xsl:text>echo "export</xsl:text>
+        <xsl:value-of select="substring-after(string(),'export')"/>
+        <xsl:text>" &gt;&gt; ~/.bashrc&#xA;</xsl:text>
+      </xsl:when>
+      <!-- For uClibc we need to cd to the Gettext package -->
+      <xsl:when test="contains(string(),'cd gettext-runtime/')">
+        <xsl:text>cd ../gettext-*/gettext-runtime</xsl:text>
+        <xsl:value-of select="substring-after(string(),'gettext-runtime')"/>
+        <xsl:text>&#xA;</xsl:text>
+      </xsl:when>
+      <!-- The Coreutils and Module-Init-Tools test suites are optional -->
+      <xsl:when test="(ancestor::sect1[@id='ch-system-coreutils'] or
+                ancestor::sect1[@id='ch-system-module-init-tools']) and
+                (contains(string(),'check') or
+                contains(string(),'distclean') or
+                contains(string(),'dummy'))">
+        <xsl:choose>
+          <xsl:when test="$testsuite = '0' or $testsuite = '1'"/>
+          <xsl:otherwise>
+            <xsl:if test="not(contains(string(),'check'))">
+              <xsl:apply-templates/>
+              <xsl:text>&#xA;</xsl:text>
+            </xsl:if>
+            <xsl:if test="contains(string(),'check')">
+              <xsl:choose>
+                <xsl:when test="$bomb-testsuite = 'n'">
+                  <xsl:value-of select="substring-before(string(),'check')"/>
+                  <xsl:text>-k check</xsl:text>
+                  <xsl:value-of select="substring-after(string(),'check')"/>
+                  <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
+                </xsl:when>
+                <xsl:otherwise>
+                  <xsl:apply-templates/>
+                  <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1</xsl:text>
+                  <xsl:if test="contains(string(),' -k ')">
+                    <xsl:text> || true</xsl:text>
+                  </xsl:if>
+                  <xsl:text>&#xA;</xsl:text>
+                </xsl:otherwise>
+              </xsl:choose>
+            </xsl:if>
+          </xsl:otherwise>
+        </xsl:choose>
+      </xsl:when>
+      <!-- Fixing butterfly toolchain test suite run -->
+      <xsl:when test="ancestor::sect1[@id='ch-system-butterfly-toolchain']
+                      and string() = 'make -k check'">
+        <xsl:choose>
+          <xsl:when test="$testsuite != '0'">
+            <xsl:choose>
+              <xsl:when test="$bomb-testsuite = 'n'">
+                <xsl:text>make -k check &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
+              </xsl:when>
+              <xsl:otherwise>
+                <xsl:apply-templates/>
+                <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1</xsl:text>
+                <xsl:if test="contains(string(),' -k ')">
+                  <xsl:text> || true</xsl:text>
+                </xsl:if>
+                <xsl:text>&#xA;</xsl:text>
+              </xsl:otherwise>
+            </xsl:choose>
+          </xsl:when>
+        </xsl:choose>
+      </xsl:when>
+      <!-- Fixing Glbc test suite  -->
+      <xsl:when test="contains(string(),'rm -v configparms') and
+                      contains(string(),'-fno-stack-protector')">
+        <xsl:choose>
+          <xsl:when test="$testsuite != '0'">
+            <xsl:apply-templates/>
+            <xsl:text>&#xA;</xsl:text>
+          </xsl:when>
+        </xsl:choose>
+      </xsl:when>
+      <xsl:when test="contains(string(),'glibc-check-log')">
+        <xsl:choose>
+          <xsl:when test="$testsuite != '0'">
+            <xsl:value-of select="substring-before(string(),'2&gt;&amp;1')"/>
+            <xsl:text>&gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
+          </xsl:when>
+        </xsl:choose>
+      </xsl:when>
+      <!-- Fixing Cocoon sanity checks  -->
+      <xsl:when test="contains(string(),'./strcat-overflow')">
+        <xsl:text>set +e&#xA;</xsl:text>
+        <xsl:apply-templates/>
+        <xsl:text>&#xA;set -e&#xA;</xsl:text>
+      </xsl:when>
+      <!-- Fixing Butterfly sanity checks  -->
+      <xsl:when test="contains(string(),'./fortify-test')
+                      or contains(string(),'./ssp-test')">
+        <xsl:text>! </xsl:text>
+        <xsl:apply-templates/>
+        <xsl:text>&#xA;</xsl:text>
+      </xsl:when>
+      <!-- Don't stop on strip run -->
+      <xsl:when test="contains(string(),'strip ')">
+        <xsl:apply-templates/>
+        <xsl:text> || true&#xA;</xsl:text>
+      </xsl:when>
+      <!-- The rest of commands -->
+      <xsl:otherwise>
+        <xsl:apply-templates/>
+        <xsl:text>&#xA;</xsl:text>
+      </xsl:otherwise>
+    </xsl:choose>
+  </xsl:template>
+
+  <xsl:template match="literal">
+    <xsl:if test="(@condition=$model or not(@condition)) and
+                  (@vendor=$kernel or not(@vendor))">
+      <xsl:apply-templates/>
+    </xsl:if>
+  </xsl:template>
+
+  <xsl:template match="replaceable">
+    <xsl:choose>
+      <xsl:when test="ancestor::sect1[@id='ch-system-glibc'] or
+                      ancestor::sect1[@id='ch-system-uclibc']">
+        <xsl:value-of select="$timezone"/>
+      </xsl:when>
+      <xsl:when test="ancestor::sect1[@id='ch-system-groff']">
+        <xsl:value-of select="$page"/>
+      </xsl:when>
+      <xsl:otherwise>
+        <xsl:text>**EDITME</xsl:text>
+        <xsl:apply-templates/>
+        <xsl:text>EDITME**</xsl:text>
+      </xsl:otherwise>
+    </xsl:choose>
+  </xsl:template>
+
+</xsl:stylesheet>

HLFS/master.sh

@@ -0,0 +1,659 @@
+#!/bin/bash
+set -e  # Enable error trapping
+
+# $Id$
+
+###################################
+###          FUNCTIONS          ###
+###################################
+
+
+#----------------------------#
+process_toolchain() {        # embryo,cocoon and butterfly need special handling
+#----------------------------#
+  local toolchain=$1
+  local this_file=$2
+  local tc_phase
+  local binutil_tarball
+  local gcc_core_tarball
+  local TC_MountPT
+  local remove_existing
+
+  tc_phase=`echo $toolchain | sed -e 's@[0-9]\{3\}-@@' -e 's@-toolchain@@' -e 's,'$N',,'`
+  case $tc_phase in
+    embryo | \
+    cocoon)    # Vars for LUSER phase
+       remove_existing="remove_existing_dirs"
+            TC_MountPT="\$(MOUNT_PT)\$(SRC)"
+       ;;
+    butterfly) # Vars for CHROOT phase
+       remove_existing="remove_existing_dirs2"
+            TC_MountPT="\$(SRC)"
+       ;;
+  esac
+
+  #
+  # Safe method to remove existing toolchain dirs
+  binutil_tarball=$(get_package_tarball_name "binutils")
+  gcc_core_tarball=$(get_package_tarball_name "gcc-core")
+(
+cat << EOF
+	@\$(call ${remove_existing},$binutil_tarball)
+	@\$(call ${remove_existing},$gcc_core_tarball)
+EOF
+) >> $MKFILE.tmp
+
+  #
+  # Manually remove the toolchain directories..
+(
+cat << EOF
+	@rm -rf ${TC_MountPT}/${tc_phase}-toolchain && \\
+	rm  -rf ${TC_MountPT}/${tc_phase}-build
+EOF
+) >> $MKFILE.tmp
+
+
+(
+cat << EOF
+	@echo "export PKGDIR=${TC_MountPT}" > envars
+EOF
+) >> $MKFILE.tmp
+
+  case ${tc_phase} in
+    butterfly)
+        [[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${toolchain}"
+        CHROOT_wrt_RunAsRoot "$this_file"
+      ;;
+    *)  LUSER_wrt_RunAsUser  "$this_file"
+      ;;
+  esac
+  #
+(
+cat << EOF
+	@\$(call ${remove_existing},$binutil_tarball)
+	@\$(call ${remove_existing},$gcc_core_tarball)
+EOF
+) >> $MKFILE.tmp
+
+  #
+  # Manually remove the toolchain directories..
+(
+cat << EOF
+	@rm -rf ${TC_MountPT}/${tc_phase}-toolchain && \\
+	rm  -rf ${TC_MountPT}/${tc_phase}-build
+EOF
+) >> $MKFILE.tmp
+
+}
+
+
+#----------------------------#
+chapter3_Makefiles() {       # Initialization of the system
+#----------------------------#
+
+  echo "${tab_}${GREEN}Processing... ${L_arrow}Chapter3     ( SETUP ) ${R_arrow}"
+
+  # If $LUSER_HOME is already present in the host, we asume that the
+  # hlfs user and group are also presents in the host, and a backup
+  # of their bash init files is made.
+(
+cat << EOF
+020-creatingtoolsdir:
+	@\$(call echo_message, Building)
+	@mkdir \$(MOUNT_PT)/tools && \\
+	rm -f /tools && \\
+	ln -s \$(MOUNT_PT)/tools /
+	@\$(call housekeeping)
+
+021-addinguser:  020-creatingtoolsdir
+	@\$(call echo_message, Building)
+	@if [ ! -d \$(LUSER_HOME) ]; then \\
+		groupadd \$(LGROUP); \\
+		useradd -s /bin/bash -g \$(LGROUP) -m -k /dev/null \$(LUSER); \\
+	else \\
+		touch luser-exist; \\
+	fi;
+	@chown \$(LUSER) \$(MOUNT_PT)/tools && \\
+	chmod -R a+wt \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
+	chmod a+wt \$(SRCSDIR)
+	@\$(call housekeeping)
+
+022-settingenvironment:  021-addinguser
+	@\$(call echo_message, Building)
+	@if [ -f \$(LUSER_HOME)/.bashrc -a ! -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
+		mv \$(LUSER_HOME)/.bashrc \$(LUSER_HOME)/.bashrc.XXX; \\
+	fi;
+	@if [ -f \$(LUSER_HOME)/.bash_profile  -a ! -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
+		mv \$(LUSER_HOME)/.bash_profile \$(LUSER_HOME)/.bash_profile.XXX; \\
+	fi;
+	@echo "set +h" > \$(LUSER_HOME)/.bashrc && \\
+	echo "umask 022" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "HLFS=\$(MOUNT_PT)" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "LC_ALL=POSIX" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "PATH=/tools/bin:/bin:/usr/bin" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "export HLFS LC_ALL PATH" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "source $JHALFSDIR/envars" >> \$(LUSER_HOME)/.bashrc && \\
+	chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bashrc && \\
+	chmod -R a+wt \$(MOUNT_PT) && \\
+	touch envars && \\
+	chown \$(LUSER) envars
+	@\$(call housekeeping)
+EOF
+) >> $MKFILE.tmp
+  chapter3=" 020-creatingtoolsdir 021-addinguser 022-settingenvironment"
+}
+
+#----------------------------#
+chapter5_Makefiles() {       # Bootstrap or temptools phase
+#----------------------------#
+  local file
+  local this_script
+
+  echo "${tab_}${GREEN}Processing... ${L_arrow}Chapter5     ( LUSER ) ${R_arrow}"
+
+  for file in chapter05/* ; do
+    # Keep the script file name
+    this_script=`basename $file`
+
+    # Skip this script depending on jhalfs.conf flags set.
+    case $this_script in
+      # If no testsuites will be run, then TCL, Expect and DejaGNU aren't needed
+      *tcl* )     [[ "$TEST" = "0" ]] && continue; ;;
+      *expect* )  [[ "$TEST" = "0" ]] && continue; ;;
+      *dejagnu* ) [[ "$TEST" = "0" ]] && continue; ;;
+        # Test if the stripping phase must be skipped
+      *stripping* ) [[ "$STRIP" = "n" ]] && continue ;;
+      *) ;;
+    esac
+
+    # First append each name of the script files to a list (this will become
+    # the names of the targets in the Makefile
+    chapter5="$chapter5 $this_script"
+
+    # Grab the name of the target
+    name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' -e 's@-pass[0-9]\{1\}@@'`
+
+    # Adjust 'name'
+    case $name in
+      uclibc)     name="uClibc"  ;;
+    esac
+
+    # Set the dependency for the first target.
+    if [ -z $PREV ] ; then PREV=022-settingenvironment ; fi
+
+    #--------------------------------------------------------------------#
+    #         >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<<          #
+    #--------------------------------------------------------------------#
+    #
+    # Drop in the name of the target on a new line, and the previous target
+    # as a dependency. Also call the echo_message function.
+
+    # This is a very special script and requires manual processing
+    # NO Optimization allowed
+    if [[ ${name} = "embryo-toolchain" ]] || \
+       [[ ${name} = "cocoon-toolchain" ]]; then
+       LUSER_wrt_target "$this_script" "$PREV"
+         process_toolchain "${this_script}" "${file}"
+       wrt_touch
+       PREV=$this_script
+       continue
+    fi
+    #
+    LUSER_wrt_target "$this_script" "$PREV"
+    # Find the version of the command files, if it corresponds with the building of
+    # a specific package. Fix GCC tarball name for 2.4-branch.
+    case $name in
+      gcc ) pkg_tarball=$(get_package_tarball_name gcc-core) ;;
+        * ) pkg_tarball=$(get_package_tarball_name $name) ;;
+    esac
+    # If $pkg_tarball isn't empty, we've got a package...
+    if [ "$pkg_tarball" != "" ] ; then
+      # Insert instructions for unpacking the package and to set the PKGDIR variable.
+      LUSER_wrt_unpack "$pkg_tarball"
+      # If using optimizations, write the instructions
+      [[ "$OPTIMIZE" = "2" ]] &&  wrt_optimize "$name" && wrt_makeflags "$name"
+    fi
+    # Insert date and disk usage at the top of the log file, the script run
+    # and date and disk usage again at the bottom of the log file.
+    LUSER_wrt_RunAsUser "${file}"
+
+    # Remove the build directory(ies) except if the package build fails
+    # (so we can review config.cache, config.log, etc.)
+    if [ "$pkg_tarball" != "" ] ; then
+      LUSER_RemoveBuildDirs "$name"
+    fi
+
+    # Include a touch of the target name so make can check if it's already been made.
+    wrt_touch
+    #
+    #--------------------------------------------------------------------#
+    #              >>>>>>>> END OF Makefile ENTRY <<<<<<<<               #
+    #--------------------------------------------------------------------#
+
+    # Keep the script file name for Makefile dependencies.
+    PREV=$this_script
+  done  # end for file in chapter05/*
+}
+
+
+#----------------------------#
+chapter6_Makefiles() {       # sysroot or chroot build phase
+#----------------------------#
+  local file
+  local this_script
+  # Set envars and scripts for iteration targets
+  if [[ -z "$1" ]] ; then
+    local N=""
+  else
+    local N=-build_$1
+    local chapter6=""
+    mkdir chapter06$N
+    cp chapter06/* chapter06$N
+    for script in chapter06$N/* ; do
+      # Overwrite existing symlinks, files, and dirs
+      sed -e 's/ln -s /ln -sf /g' \
+          -e 's/^mv /&-f /g' \
+          -e 's/mkdir -v/&p/g' -i ${script}
+      # Rename the scripts
+      mv ${script} ${script}$N
+    done
+    # Remove Bzip2 binaries before make install
+    sed -e 's@make install@rm -vf /usr/bin/bz*\n&@' -i chapter06$N/*-bzip2$N
+    # Fix how Module-Init-Tools do the install target
+    sed -e 's@make install@make INSTALL=install install@' -i chapter06$N/*-module-init-tools$N
+    # Don't readd already existing groups
+    sed -e '/groupadd/d' -i chapter06$N/*-udev$N
+  fi
+
+  echo "${tab_}${GREEN}Processing... ${L_arrow}Chapter6$N     ( CHROOT ) ${R_arrow}"
+
+  for file in chapter06$N/* ; do
+    # Keep the script file name
+    this_script=`basename $file`
+
+    # Skip this script depending on jhalfs.conf flags set.
+    case $this_script in
+        # We'll run the chroot commands differently than the others, so skip them in the
+        # dependencies and target creation.
+      *chroot* )  continue ;;
+        # Test if the stripping phase must be skipped
+      *-stripping* )  [[ "$STRIP" = "n" ]] && continue ;;
+        # Skip linux-headers in iterative builds
+      *linux-headers*) [[ -n "$N" ]] && continue ;;
+    esac
+
+    # Grab the name of the target
+    name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' -e 's,'$N',,'`
+
+    case $name in
+      uclibc)  name="uClibc"   ;;
+    esac
+
+    # Find the version of the command files, if it corresponds with the building of
+    # a specific package. Fix GCC tarball name for 2.4-branch.
+    case $name in
+      gcc ) pkg_tarball=$(get_package_tarball_name gcc-core) ;;
+        * ) pkg_tarball=$(get_package_tarball_name $name) ;;
+    esac
+
+    if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
+      case "${this_script}" in
+        *stripping*) ;;
+        *)  continue ;;
+      esac
+    fi
+
+    # Append each name of the script files to a list (this will become
+    # the names of the targets in the Makefile
+    case "${this_script}" in
+      *kernfs* ) runasroot=" ${this_script}" ;;
+             * ) chapter6="$chapter6 ${this_script}" ;;
+    esac
+
+
+    #--------------------------------------------------------------------#
+    #         >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<<          #
+    #--------------------------------------------------------------------#
+    #
+    # Drop in the name of the target on a new line, and the previous target
+    # as a dependency. Also call the echo_message function.
+    if [[ ${name} = "butterfly-toolchain" ]]; then
+      CHROOT_wrt_target "${this_script}" "$PREV"
+      # Touch timestamp file if installed files logs will be created.
+      # But only for the firt build when running iterative builds.
+      if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
+        CHROOT_wrt_TouchTimestamp
+      fi
+      process_toolchain "${this_script}" "${file}"
+      if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
+        CHROOT_wrt_LogNewFiles "$name"
+      fi
+      wrt_touch
+      PREV=$this_script
+      continue
+    fi
+    # kernfs is run in SUDO target
+    case "${this_script}" in
+      *kernfs* )  LUSER_wrt_target  "${this_script}" "$PREV" ;;
+             * )  CHROOT_wrt_target "${this_script}" "$PREV" ;;
+    esac
+
+    # If $pkg_tarball isn't empty, we've got a package...
+    # Insert instructions for unpacking the package and changing directories
+    if [ "$pkg_tarball" != "" ] ; then
+      # Touch timestamp file if installed files logs will be created.
+      # But only for the firt build when running iterative builds.
+      if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
+        CHROOT_wrt_TouchTimestamp
+      fi
+      CHROOT_Unpack "$pkg_tarball"
+      # If the testsuites must be run, initialize the log file
+      # butterfly-toolchain tests are enabled in 'process_tookchain' function
+      # 2.4-branch toolchain is ernabled here.
+      case $name in
+        glibc | gcc | binutils)
+            [[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${this_script}" ;;
+        * ) [[ "$TEST" > "1" ]]  && CHROOT_wrt_test_log "${this_script}" ;;
+      esac
+      # If using optimizations, write the instructions
+      [[ "$OPTIMIZE" != "0" ]] &&  wrt_optimize "$name" && wrt_makeflags "$name"
+    fi
+
+    # In kernfs we need to set HLFS and not to use chroot.
+    case "${this_script}" in
+      *kernfs* ) wrt_RunAsRoot "${file}" ;;
+             * ) CHROOT_wrt_RunAsRoot "${file}" ;;
+    esac
+    #
+    # Write installed files log and remove the build directory(ies)
+    # except if the package build fails.
+    if [ "$pkg_tarball" != "" ] ; then
+      CHROOT_wrt_RemoveBuildDirs "$name"
+      if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
+        CHROOT_wrt_LogNewFiles "$name"
+      fi
+    fi
+    #
+    # Include a touch of the target name so make can check if it's already been made.
+    wrt_touch
+    #
+    #--------------------------------------------------------------------#
+    #              >>>>>>>> END OF Makefile ENTRY <<<<<<<<               #
+    #--------------------------------------------------------------------#
+
+    # Keep the script file name for Makefile dependencies.
+    PREV=${this_script}
+    # Set system_build envar for iteration targets
+    system_build=$chapter6
+  done # end for file in chapter06/*
+
+}
+
+#----------------------------#
+chapter7_Makefiles() {       # Create a bootable system.. kernel, bootscripts..etc
+#----------------------------#
+  local file
+  local this_script
+
+  echo  "${tab_}${GREEN}Processing... ${L_arrow}Chapter7     ( BOOT ) ${R_arrow}"
+  for file in chapter07/*; do
+    # Keep the script file name
+    this_script=`basename $file`
+
+    case $this_script in
+      *grub)     continue  ;; # Grub must be configured manually.
+      *console)  continue  ;; # Use the file generated by lfs-bootscripts
+      *fstab)    [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab
+        ;;
+      *kernel)   # If no .config file is supplied, the kernel build is skipped
+                 [[ -z $CONFIG ]] && continue
+                 cp $CONFIG $BUILDDIR/sources/kernel-config
+        ;;
+    esac
+
+    # First append then name of the script file to a list (this will become
+    # the names of the targets in the Makefile
+    chapter7="$chapter7 $this_script"
+
+    #--------------------------------------------------------------------#
+    #         >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<<          #
+    #--------------------------------------------------------------------#
+    #
+    # Drop in the name of the target on a new line, and the previous target
+    # as a dependency. Also call the echo_message function.
+    CHROOT_wrt_target "$this_script" "$PREV"
+
+    case "${this_script}" in
+      *bootscripts*)
+        if [ "${INSTALL_LOG}" = "y" ] ; then
+          CHROOT_wrt_TouchTimestamp
+        fi
+        CHROOT_Unpack $(get_package_tarball_name "lfs-bootscripts")
+        blfs_bootscripts=$(get_package_tarball_name "blfs-bootscripts" | sed -e 's/.tar.*//' )
+        echo -e "\t@echo \"\$(MOUNT_PT)\$(SRC)/$blfs_bootscripts\" >> sources-dir" >> $MKFILE.tmp
+        ;;
+      *kernel)
+        name="linux"
+        pkg_tarball=$(get_package_tarball_name $name)
+        if [ "${INSTALL_LOG}" = "y" ] ; then
+          CHROOT_wrt_TouchTimestamp
+        fi
+        CHROOT_Unpack "$pkg_tarball"
+        ;;
+    esac
+
+    case "${this_script}" in
+      *fstab*) # Check if we have a real /etc/fstab file
+        if [[ -n "$FSTAB" ]] ; then
+           CHROOT_wrt_CopyFstab
+        else
+           CHROOT_wrt_RunAsRoot "$file"
+        fi
+        ;;
+      *)  # All other scripts
+        CHROOT_wrt_RunAsRoot "${file}"
+        ;;
+    esac
+
+    # Remove the build directory except if the package build fails.
+    case "${this_script}" in
+      *bootscripts*)
+(
+cat << EOF
+	@ROOT=\`head -n1 \$(SRC)/\$(PKG_LST) | sed 's@^./@@;s@/.*@@'\` && \\
+	rm -r \$(SRC)/\$\$ROOT
+	@rm -rf \`cat sources-dir\` && \\
+	rm sources-dir
+EOF
+) >> $MKFILE.tmp
+          if [ "${INSTALL_LOG}" = "y" ] ; then
+            CHROOT_wrt_LogNewFiles "$name"
+          fi
+       ;;
+      *kernel)       CHROOT_wrt_RemoveBuildDirs "dummy"
+                     if [ "${INSTALL_LOG}" = "y" ] ; then
+                       CHROOT_wrt_LogNewFiles "$name"
+                     fi ;;
+    esac
+
+    # Include a touch of the target name so make can check if it's already been made.
+    wrt_touch
+    #
+    #--------------------------------------------------------------------#
+    #              >>>>>>>> END OF Makefile ENTRY <<<<<<<<               #
+    #--------------------------------------------------------------------#
+
+    # Keep the script file name for Makefile dependencies.
+    PREV=$this_script
+  done  # for file in chapter07/*
+}
+
+
+#----------------------------#
+build_Makefile() {           # Construct a Makefile from the book scripts
+#----------------------------#
+  echo "Creating Makefile... ${BOLD}START${OFF}"
+
+  cd $JHALFSDIR/${PROGNAME}-commands
+  # Start with a clean Makefile.tmp file
+  >$MKFILE.tmp
+
+  chapter3_Makefiles
+  chapter5_Makefiles
+  chapter6_Makefiles
+  # Add the iterations targets, if needed
+  [[ "$COMPARE" = "y" ]] && wrt_compare_targets
+  chapter7_Makefiles
+  # Add the CUSTOM_TOOLS targets, if needed
+  [[ "$CUSTOM_TOOLS" = "y" ]] && wrt_CustomTools_target
+  # Add the BLFS_TOOL targets, if needed
+  [[ "$BLFS_TOOL" = "y" ]] && wrt_blfs_tool_targets
+
+  # Add a header, some variables and include the function file
+  # to the top of the real Makefile.
+  wrt_Makefile_header
+
+  # Add chroot commands
+  CHROOT_LOC="`whereis -b chroot | cut -d " " -f2`"
+  i=1
+  for file in chapter06/*chroot* ; do
+    chroot=`cat $file | \
+            sed -e "s@chroot@$CHROOT_LOC@" \
+                -e '/#!\/bin\/bash/d' \
+                -e '/^export/d' \
+                -e '/^logout/d' \
+                -e 's@ \\\@ @g' | \
+            tr -d '\n' |  \
+            sed -e 's/  */ /g' \
+                -e 's|\\$|&&|g' \
+                -e 's|exit||g' \
+                -e 's|$| -c|' \
+                -e 's|"$$HLFS"|$(MOUNT_PT)|'\
+                -e 's|set -e||' \
+                -e 's|set +h||'`
+    echo -e "CHROOT$i= $chroot\n" >> $MKFILE
+    i=`expr $i + 1`
+  done
+
+  # Drop in the main target 'all:' and the chapter targets with each sub-target
+  # as a dependency.
+(
+  cat << EOF
+
+all:	ck_UID mk_SETUP mk_LUSER mk_SUDO mk_CHROOT mk_BOOT create-sbu_du-report mk_CUSTOM_TOOLS mk_BLFS_TOOL
+	@sudo make do-housekeeping
+	@echo "$VERSION - jhalfs build" > hlfs-release && \\
+	sudo install -m444 hlfs-release \$(MOUNT_PT)/etc/hlfs-release
+	@\$(call echo_finished,$VERSION)
+
+ck_UID:
+	@if [ \`id -u\` = "0" ]; then \\
+	  echo "--------------------------------------------------"; \\
+	  echo "You cannot run this makefile from the root account"; \\
+	  echo "--------------------------------------------------"; \\
+	  exit 1; \\
+	fi
+
+mk_SETUP:
+	@\$(call echo_SU_request)
+	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
+	@touch \$@
+
+mk_LUSER: mk_SETUP
+	@\$(call echo_SULUSER_request)
+	@(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) LUSER" )
+	@sudo make restore-luser-env
+	@touch \$@
+
+mk_SUDO: mk_LUSER
+	@sudo make SUDO
+	@touch \$@
+
+mk_CHROOT: mk_SUDO
+	@if [ ! -e \$(MOUNT_PT)/dev ]; then \\
+	  mkdir \$(MOUNT_PT)/dev && \\
+	  sudo mknod -m 666 \$(MOUNT_PT)/dev/null c 1 3 && \\
+	  sudo mknod -m 600 \$(MOUNT_PT)/dev/console c 5 1 && \\
+	  sudo chown -R 0:0 \$(MOUNT_PT)/dev; \\
+	fi;
+	@\$(call echo_CHROOT_request)
+	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CHROOT")
+	@touch \$@
+
+mk_BOOT: mk_CHROOT
+	@\$(call echo_CHROOT_request)
+	@( sudo \$(CHROOT2) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) BOOT")
+	@touch \$@
+
+mk_CUSTOM_TOOLS: create-sbu_du-report
+	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
+	  \$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
+	  sudo mkdir -p ${BUILDDIR}${TRACKING_DIR}; \\
+	  (sudo \$(CHROOT2) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS"); \\
+	fi;
+	@touch \$@
+
+mk_BLFS_TOOL: mk_CUSTOM_TOOLS
+	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
+	  \$(call sh_echo_PHASE,Building BLFS_TOOL); \\
+	  sudo mkdir -p $BUILDDIR$TRACKING_DIR; \\
+	  (sudo \$(CHROOT2) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) BLFS_TOOL"); \\
+	fi;
+	@touch \$@
+
+
+SETUP:        $chapter3
+LUSER:        $chapter5
+SUDO:         $runasroot
+CHROOT:       SHELL=/tools/bin/bash
+CHROOT:       $chapter6
+BOOT:         $chapter7
+CUSTOM_TOOLS: $custom_list
+BLFS_TOOL:    $blfs_tool
+
+
+create-sbu_du-report:  mk_BOOT
+	@\$(call echo_message, Building)
+	@if [ "\$(ADD_REPORT)" = "y" ]; then \\
+	  ./create-sbu_du-report.sh logs $VERSION; \\
+	  \$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
+	fi;
+	@touch  \$@
+
+restore-luser-env:
+	@\$(call echo_message, Building)
+	@if [ -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
+		mv -f \$(LUSER_HOME)/.bashrc.XXX \$(LUSER_HOME)/.bashrc; \\
+	fi;
+	@if [ -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
+		mv \$(LUSER_HOME)/.bash_profile.XXX \$(LUSER_HOME)/.bash_profile; \\
+	fi;
+	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bash* && \\
+	touch \$@ && \\
+	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
+	echo --------------------------------------------------------------------------------\$(WHITE)
+
+do-housekeeping:
+	@-umount \$(MOUNT_PT)/dev/pts
+	@-umount \$(MOUNT_PT)/dev/shm
+	@-umount \$(MOUNT_PT)/dev
+	@-umount \$(MOUNT_PT)/sys
+	@-umount \$(MOUNT_PT)/proc
+	@-rm /tools
+	@-if [ ! -f luser-exist ]; then \\
+		userdel \$(LUSER); \\
+		rm -rf \$(LUSER_HOME); \\
+	fi;
+
+
+
+EOF
+) >> $MKFILE
+
+  # Bring over the items from the Makefile.tmp
+  cat $MKFILE.tmp >> $MKFILE
+  rm $MKFILE.tmp
+  echo "Creating Makefile... ${BOLD}DONE${OFF}"
+
+}

LFS/master.sh

@@ -1,211 +1,106 @@
 #!/bin/bash
 
-###################################
+# $Id$
-###	    FUNCTIONS		###
+
-###################################
+#########################################
+### LFS MAKEFILE GENERATION FUNCTIONS ###
+#########################################
 
 
-#############################################################
+#----------------------------#
+chapter4_Makefiles() {       #
+#----------------------------#
+  echo "${tab_}${GREEN}Processing... ${L_arrow}Chapter4     ( SETUP ) ${R_arrow}"
+
+# If $LUSER_HOME is already present in the host, we asume that the
+# lfs user and group are also presents in the host, and a backup
+# of their bash init files is made.
+(
+    cat << EOF
+04_02-creatingtoolsdir:
+	@\$(call echo_message, Building)
+	@mkdir \$(MOUNT_PT)/tools && \\
+	rm -f /tools && \\
+	ln -s \$(MOUNT_PT)/tools /
+	@\$(call housekeeping)
+
+04_03-addinguser:  04_02-creatingtoolsdir
+	@\$(call echo_message, Building)
+	@if [ ! -d \$(LUSER_HOME) ]; then \\
+		groupadd \$(LGROUP); \\
+		useradd -s /bin/bash -g \$(LGROUP) -m -k /dev/null \$(LUSER); \\
+	else \\
+		touch luser-exist; \\
+	fi;
+	@chown \$(LUSER) \$(MOUNT_PT)/tools && \\
+	chmod -R a+wt \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
+	chmod a+wt \$(SRCSDIR)
+	@\$(call housekeeping)
+
+04_04-settingenvironment:  04_03-addinguser
+	@\$(call echo_message, Building)
+	@if [ -f \$(LUSER_HOME)/.bashrc -a ! -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
+		mv \$(LUSER_HOME)/.bashrc \$(LUSER_HOME)/.bashrc.XXX; \\
+	fi;
+	@if [ -f \$(LUSER_HOME)/.bash_profile  -a ! -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
+		mv \$(LUSER_HOME)/.bash_profile \$(LUSER_HOME)/.bash_profile.XXX; \\
+	fi;
+	@echo "set +h" > \$(LUSER_HOME)/.bashrc && \\
+	echo "umask 022" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "LFS=\$(MOUNT_PT)" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "LC_ALL=POSIX" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "PATH=/tools/bin:/bin:/usr/bin" >> \$(LUSER_HOME)/.bashrc && \\
+	echo "export LFS LC_ALL PATH" >> \$(LUSER_HOME)/.bashrc && \\
+	chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bashrc
+	@\$(call housekeeping)
+EOF
+) > $MKFILE.tmp
+
+  chapter4=" 04_02-creatingtoolsdir 04_03-addinguser 04_04-settingenvironment"
+  PREV=04_04-settingenvironment
+}
 
 
-#-------------------------#
+#----------------------------#
-chapter_targets() {       #
+chapter5_Makefiles() {       #
-#-------------------------#
+#----------------------------#
-# $1 is the chapter number. Pad it with 0 to the left to obtain a 2-digit
+  echo "${tab_}${GREEN}Processing... ${L_arrow}Chapter5     ( LUSER ) ${R_arrow}"
-# number:
-  printf -v dir chapter%02d $1
 
-# $2 contains the build number if rebuilding for ICA
+  for file in chapter05/* ; do
-  if [[ -z "$2" ]] ; then
-    local N=""
-  else
-    local N=-build_$2
-    local CHROOT_TGT=""
-    mkdir ${dir}$N
-    cp ${dir}/* ${dir}$N
-    for script in ${dir}$N/* ; do
-      # Overwrite existing symlinks, files, and dirs
-      sed -e 's/ln *-sv/&f/g' \
-          -e 's/mv *-v/&f/g' \
-          -e 's/mkdir *-v/&p/g' -i ${script}
-      # Rename the scripts
-      mv ${script} ${script}$N
-    done
-    # Remove Bzip2 binaries before make install (LFS-6.2 compatibility)
-    sed -e 's@make install@rm -vf /usr/bin/bz*\n&@' -i ${dir}$N/*-bzip2$N
-    # Remove openssl-<version> from /usr/share/doc (LFS-9.x), because
-    # otherwise the mv command creates an openssl directory.
-    sed -e 's@mv -v@rm -rfv /usr/share/doc/openssl-*\n&@' \
-        -i ${dir}$N/*-openssl$N
-  fi
-
-  echo "${tab_}${GREEN}Processing... ${L_arrow}Chapter $1$N${R_arrow}"
-
-  for file in ${dir}$N/* ; do
     # Keep the script file name
     this_script=`basename $file`
 
-    # Some scripts need peculiar actions:
+    # If no testsuites will be run, then TCL, Expect and DejaGNU aren't needed
-    # - Stripping at the end of system build: lfs.xsl does not generate
-    #   correct commands if the user does not want to strip, so skip it
-    #   in this case
-    # - do not reinstall linux-headers when rebuilding
-    # - grub config: must be done manually; skip it
-    # - handle fstab and .config. Skip kernel if .config not supplied
     case "${this_script}" in
-      *stripping*)     [[ "${STRIP}" = "n" ]] && continue ;;
+      *tcl)       [[ "${TEST}" = "0" ]] && continue ;;
-      *linux-headers*) [[ -n "$N" ]] && continue ;;
+      *expect)    [[ "${TEST}" = "0" ]] && continue ;;
-      8*grub)          (( nb_chaps == 5 )) && continue ;;
+      *dejagnu)   [[ "${TEST}" = "0" ]] && continue ;;
-      10*grub)         continue ;;
+      *stripping) [[ "${STRIP}" = "n" ]] && continue ;;
-      *fstab)          [[ -z "${FSTAB}" ]] ||
-                       [[ ${FSTAB} == $BUILDDIR/sources/fstab ]] ||
-                       cp ${FSTAB} $BUILDDIR/sources/fstab ;;
-      *kernel)         [[ -z ${CONFIG} ]] && continue
-                       [[ ${CONFIG} == $BUILDDIR/sources/kernel-config ]] ||
-                       cp ${CONFIG} $BUILDDIR/sources/kernel-config  ;;
     esac
-    # Grab the name of the target
-    # This is only used to check the name in "opt_override" or "BLACKLIST"
-    name=`echo ${this_script} | sed -e 's@[0-9]\{3,4\}-@@' \
-                                    -e 's@-pass[0-9]\{1\}@@' \
-                                    -e 's@-libstdc++@@' \
-                                    -e 's,'$N',,' \
-                                    -e 's@-32@@'`
 
-    # Find the name of the tarball and the version of the package
+    # Append the script name to the chapter dependencies list
-    # If it doesn't exist, we skip it in iterations rebuilds (except stripping
+    # The changingowner script need be run as root into the SUDO target
-    # and revisedchroot, where .a and .la files are removed).
-    pkg_tarball=$(sed -n 's/tar -xf \(.*\)/\1/p' $file)
-    pkg_version=$(sed -n 's/VERSION=\(.*\)/\1/p' $file)
-
-    if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
     case "${this_script}" in
-        *stripping*|*cleanup*|*revised*) ;;
+      *changingowner) runasroot="$runasroot ${this_script}" ;;
-        *)  continue ;;
+                   *) chapter5="$chapter5 ${this_script}" ;;
     esac
-    fi
-
-    # Append the name of the script to a list. The name of the
-    # list is contained in the variable Makefile_target. We adjust this
-    # variable at various points. Note that it is initialized to "SETUP"
-    # in the main function, before calling this function for the first time.
-    case "${this_script}" in
-      *settingenvironment) Makefile_target=LUSER_TGT  ;;
-      *changingowner     ) Makefile_target=SUDO_TGT   ;;
-      *creatingdirs      ) Makefile_target=CHROOT_TGT ;;
-      *bootscripts       ) Makefile_target=BOOT_TGT   ;; # case of sysv    book
-      *network           ) Makefile_target=BOOT_TGT   ;; # case of systemd book
-    esac
-    eval $Makefile_target=\"\$$Makefile_target ${this_script}\"
 
     #--------------------------------------------------------------------#
     #         >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<<          #
     #--------------------------------------------------------------------#
-
+    #
     # Drop in the name of the target on a new line, and the previous target
     # as a dependency. Also call the echo_message function.
-    case $Makefile_target in
+    wrt_target "${this_script}" "$PREV"
-      CHROOT_TGT)  CHROOT_wrt_target "${this_script}" "$PREV" "$pkg_version" ;;
-      *)            LUSER_wrt_target "${this_script}" "$PREV" "$pkg_version" ;;
-    esac
 
-    # If $pkg_tarball isn't empty, we've got a package...
+    # Run the script.
-    if [ "$pkg_tarball" != "" ] ; then
+    # The changingowner script must be run as root.
-      # Touch timestamp file if installed files logs shall be created.
-      # But only for the final install chapter and not when rebuilding it
-      if [ "${INSTALL_LOG}" = "y" ] &&
-         (( 1+nb_chaps <= $1 )) &&
-         [ "x$N" = x ] ; then
-        CHROOT_wrt_TouchTimestamp
-      fi
-      # Always initialize the test log file, since the test instructions may
-      # be "uncommented" by the user
-      case $Makefile_target in
-       CHROOT_TGT)  CHROOT_wrt_test_log "${this_script}" "$pkg_version" ;;
-       LUSER_TGT )  LUSER_wrt_test_log  "${this_script}" "$pkg_version" ;;
-      esac
-
-      # If using optimizations, write the instructions
-      case "${OPTIMIZE}$1${nb_chaps}${this_script}${REALSBU}" in
-          0* | *binutils-pass1y | 15* | 167* | 177*) ;;
-          *kernel*) ;; # No CFLAGS for kernel
-          *)  wrt_optimize "$name" ;;
-      esac
-      # There is no need to tweak MAKEFLAGS anymore, this is done
-      # by lfs.xsl. But still, NINJAJOBS needs to be set if
-      # N_PARALLEL is defined.
-      if [ -n "N_PARALLEL" ]; then
-         wrt_makeflags "$name" "$JH_MAKEFLAGS" "$N_PARALLEL"
-      fi
-    fi # end of package specific instructions
-
-# Some scriptlet have a special treatment; otherwise standard
     case "${this_script}" in
-      *addinguser)
+      *changingowner)  wrt_RunAsRoot "$file" ;;
-(
+      *)               wrt_RunScript "$file" ;;
-# /var/lib may already exist and be owned by root if blfs tools
-# have been installed.
-cat << EOF
-	@if [ -f luser-id ]; then \\
-	  function useradd() { true; }; \\
-	  function groupadd() { true; }; \\
-	  export -f useradd groupadd; \\
-	fi; \\
-	export LFS=\$(MOUNT_PT) && \\
-	\$(CMDSDIR)/`dirname $file`/\$@ >> \$(LOGDIR)/\$@ 2>&1; \\
-	\$(PRT_DU) >>logs/\$@
-	@chown \$(LUSER):\$(LGROUP) envars
-	@if [ -d "\$(MOUNT_PT)/var/lib" ]; then \\
-	    chown \$(LUSER):\$(LGROUP) \$(MOUNT_PT)/var/lib; \\
-	fi
-	@chmod -R a+wt $JHALFSDIR
-	@chmod a+wt \$(SRCSDIR)
-EOF
-) >> $MKFILE.tmp
-	      ;;
-      *settingenvironment)
-(
-cat << EOF
-	@cd && \\
-	function source() { true; } && \\
-	export -f source && \\
-	\$(CMDSDIR)/`dirname $file`/\$@ >> \$(LOGDIR)/\$@ 2>&1 && \\
-	sed 's|/mnt/lfs|\$(MOUNT_PT)|' -i .bashrc && \\
-	echo source $JHALFSDIR/envars >> .bashrc
-	@\$(PRT_DU) >>logs/\$@
-EOF
-) >> $MKFILE.tmp
-	      ;;
-      *fstab) if [[ -n "$FSTAB" ]]; then
-                CHROOT_wrt_CopyFstab
-              else
-                CHROOT_wrt_RunAsRoot "$file"
-              fi
-              ;;
-
-      *)
-         # Insert date and disk usage at the top of the log file, the script
-         # run and date and disk usage again at the bottom of the log file.
-         case "${Makefile_target}" in
-           SETUP_TGT | SUDO_TGT)  wrt_RunAsRoot "$file" "$pkg_version" ;;
-           LUSER_TGT)             LUSER_wrt_RunAsUser "$file" "$pkg_version" ;;
-           CHROOT_TGT | BOOT_TGT) CHROOT_wrt_RunAsRoot "$file" "$pkg_version" ;;
-         esac
-	      ;;
     esac
 
-    # Write installed files log and remove the build directory(ies)
+    # Write the target entry footer.
-    # except if the package build fails.
-    if [ "$pkg_tarball" != "" ] ; then
-      if [ "${INSTALL_LOG}" = "y" ] &&
-         (( 1+nb_chaps <= $1 )) &&
-         [ "x${N}" = "x" ] ; then
-        CHROOT_wrt_LogNewFiles "${this_script}"
-      fi
-    fi
-
-    # Include a touch of the target name so make can check
-    # if it's already been made.
     wrt_touch
     #
     #--------------------------------------------------------------------#
@@ -214,61 +109,193 @@ EOF
 
     # Keep the script file name for Makefile dependencies.
     PREV=${this_script}
-    # Set "system_build" var for iteration targets
+  done  # end for file in chapter05/*
-    if [ -z "$N" ] && (( 1+nb_chaps == $1 )); then
+}
-      system_build="$system_build $this_script"
+
+
+#----------------------------#
+chapter6_Makefiles() {       #
+#----------------------------#
+
+  # Set envars and scripts for iteration targets
+  if [[ -z "$1" ]] ; then
+    local N=""
+  else
+    local N=-build_$1
+    local chapter6=""
+    mkdir chapter06$N
+    cp chapter06/* chapter06$N
+    for script in chapter06$N/* ; do
+      # Overwrite existing symlinks, files, and dirs
+      sed -e 's/ln -sv/&f/g' \
+          -e 's/mv -v/&f/g' \
+          -e 's/mkdir -v/&p/g' -i ${script}
+      # Rename the scripts
+      mv ${script} ${script}$N
+    done
   fi
 
-  done  # end for file in $dir/*
+  echo "${tab_}${GREEN}Processing... ${L_arrow}Chapter6$N     ( CHROOT ) ${R_arrow}"
-  # Set "system_build" when rebuilding: note the CHROOT_TGT is local
+
-  # in that case.
+  for file in chapter06$N/* ; do
-  if [ -n "$N" ]; then
+    # Keep the script file name
-    system_build="$CHROOT_TGT"
+    this_script=`basename $file`
+
+    # Chroot commands are set as envars in the Makefile header.
+    # Skip linux-headers in iterative builds.
+    case "${this_script}" in
+      *chroot)      continue ;;
+      *stripping*) [[ "${STRIP}" = "n" ]] && continue ;;
+      *linux-headers*) [[ -n "$N" ]] && continue ;;
+    esac
+
+    # If building a package, grab the phase name to be used with INSTALL_LOG
+    name=`grep "^PKG_PHASE=" ${file} | sed -e 's@PKG_PHASE=@@'`
+
+    # Skip scripts not needed for iterations rebuilds
+    if [[ "$name" = "" ]] && [[ -n "$N" ]] ; then
+      case "${this_script}" in
+        *stripping*) ;;
+        *)  continue ;;
+      esac
     fi
+
+    # Append the script name to the chapter dependencies list
+    # The kernfs script need be run as root into the SUDO target
+    case "${this_script}" in
+      *kernfs) runasroot="$runasroot ${this_script}" ;;
+            *) chapter6="$chapter6 ${this_script}" ;;
+    esac
+
+    #--------------------------------------------------------------------#
+    #         >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<<          #
+    #--------------------------------------------------------------------#
+    #
+    # Drop in the name of the target on a new line, and the previous target
+    # as a dependency. Also call the echo_message function.
+    wrt_target  "${this_script}" "$PREV"
+
+    # Touch timestamp file if installed files logs will be created.
+    # But only for the firt build when running iterative builds.
+    if [ "$name" != "" ] && [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
+      wrt_TouchTimestamp
+    fi
+
+    # Run the script.
+    # The kernfs script must be run as root.
+    case "${this_script}" in
+      *kernfs)  wrt_RunAsRoot "$file" ;;
+      *)        wrt_RunScript "$file" ;;
+    esac
+
+    # Write installed files log
+    if [ "$name" != "" ] && [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
+      wrt_LogNewFiles "$name"
+    fi
+
+    # Write the target entry footer.
+    wrt_touch
+    #
+    #--------------------------------------------------------------------#
+    #              >>>>>>>> END OF Makefile ENTRY <<<<<<<<               #
+    #--------------------------------------------------------------------#
+
+    # Keep the script file name for Makefile dependencies.
+    PREV=${this_script}
+    # Set system_build envar for iteration targets
+    system_build=$chapter6
+  done # end for file in chapter06/*
 }
 
+
+#----------------------------#
+chapter78_Makefiles() {      #
+#----------------------------#
+  echo "${tab_}${GREEN}Processing... ${L_arrow}Chapter7/8   ( BOOT ) ${R_arrow}"
+
+  for file in chapter0{7,8}/* ; do
+    # Keep the script file name
+    this_script=`basename $file`
+
+    # Grub must be configured manually.
+    # Handle fstab creation.
+    # If no .config file is supplied, the kernel build is skipped
+    case ${this_script} in
+      *grub)    continue ;;
+      *fstab)   [[ -n "${FSTAB}" ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
+      *kernel)  [[ -z "${CONFIG}" ]] && continue
+                cp ${CONFIG} $BUILDDIR/sources/kernel-config  ;;
+    esac
+
+    # If building a package, grab the phase name to be used with INSTALL_LOG
+    name=`grep "^PKG_PHASE=" ${file} | sed -e 's@PKG_PHASE=@@'`
+
+    # Append the script name to the chapter dependencies list
+    chapter78="$chapter78 ${this_script}"
+
+    #--------------------------------------------------------------------#
+    #         >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<<          #
+    #--------------------------------------------------------------------#
+    #
+    # Drop in the name of the target on a new line, and the previous target
+    # as a dependency. Also call the echo_message function.
+    wrt_target "${this_script}" "$PREV"
+
+    # Touch timestamp file if installed files logs will be created.
+    if [ "$name" != "" ] && [ "${INSTALL_LOG}" = "y" ] ; then
+      wrt_TouchTimestamp
+    fi
+
+    # Check if we have a real /etc/fstab file and run the scripts
+    case "${this_script}" in
+      *fstab) if [[ -n $FSTAB ]]; then
+                wrt_CopyFstab
+              else
+                wrt_RunScript "$file"
+              fi ;;
+           *) wrt_RunScript "$file" ;;
+    esac
+
+    # Write installed files log
+    if [ "$name" != "" ] && [ "${INSTALL_LOG}" = "y" ] ; then
+      wrt_LogNewFiles "$name"
+    fi
+
+    # Write the target entry footer.
+    wrt_touch
+    #
+    #--------------------------------------------------------------------#
+    #              >>>>>>>> END OF Makefile ENTRY <<<<<<<<               #
+    #--------------------------------------------------------------------#
+
+    # Keep the script file name for Makefile dependencies.
+    PREV=${this_script}
+  done  # for file in chapter0{7,8}/*
+
+}
+
+
 #----------------------------#
 build_Makefile() {           #
 #----------------------------#
 
   echo "Creating Makefile... ${BOLD}START${OFF}"
 
-  cd "$JHALFSDIR/$COMMANDS"
+  cd $JHALFSDIR/${PROGNAME}-commands
 
-  # Start with empty files
+  # Start with a clean Makefile.tmp file
   >$MKFILE
-  >$MKFILE.tmp
 
-  # Ensure the first dependency is empty
+  chapter4_Makefiles
-  unset PREV
+  chapter5_Makefiles
-
+  chapter6_Makefiles
-  # We begin with the SETUP target; successive targets will be assigned in
-  # the chapter_targets function.
-  Makefile_target=SETUP_TGT
-
-  # We need to know the chapter numbering, which depends on the version
-  # of the book. Use the number of subdirs to know which version we have
-  chaps=($(echo chapter*))
-  nb_chaps=${#chaps[*]} # 5 if classical version, 7 if new version
-# DEBUG
-#  echo chaps: ${chaps[*]}
-#  echo nb_chaps: $nb_chaps
-# end DEBUG
-
-  # Make a temporary file with all script targets
-  for (( i = 4; i < nb_chaps+4; i++ )); do
-    chapter_targets $i
-    if (( i ==  nb_chaps )); then : # we have finished temporary tools
-      # Add the save target, if needed
-      [[ "$SAVE_CH5" = "y" ]] && wrt_save_target $Makefile_target
-    fi
-    if (( i ==  1+nb_chaps )); then : # we have finished final system
   # Add the iterations targets, if needed
-      [[ "$COMPARE" = "y" ]] && wrt_compare_targets $i
+  [[ "$COMPARE" = "y" ]] && wrt_compare_targets
-    fi
+  chapter78_Makefiles
-  done
   # Add the CUSTOM_TOOLS targets, if needed
   [[ "$CUSTOM_TOOLS" = "y" ]] && wrt_CustomTools_target
+  # Add the BLFS_TOOL targets, if needed
+  [[ "$BLFS_TOOL" = "y" ]] && wrt_blfs_tool_targets
 
   # Add a header, some variables and include the function file
   # to the top of the real Makefile.
@@ -277,74 +304,27 @@ build_Makefile() {           #
   # Add chroot commands
   CHROOT_LOC="`whereis -b chroot | cut -d " " -f2`"
   i=1
-  for file in ../chroot-scripts/*chroot* ; do
+  for file in chapter06/*chroot* ; do
-    chroot=`cat $file | \
+    chroot=`cat $file | tr -d '\n' | \
-            perl -pe 's|\\\\\n||g' | \
+            sed -e "s@chroot@$CHROOT_LOC@" \
-            tr -s [:space:] | \
+                -e 's@ \\\@ @g' \
-            grep chroot | \
+                -e 's/  */ /g' \
-            sed -e "s|chroot|$CHROOT_LOC|" \
                 -e 's|\\$|&&|g' \
-                -e 's|"$$LFS"|$(MOUNT_PT)|'`
+                -e 's|"$$LFS"|$(MOUNT_PT)|' \
+                -e 's|$| -c|'`
     echo -e "CHROOT$i= $chroot\n" >> $MKFILE
     i=`expr $i + 1`
   done
 
-  # If CPUSET is defined and not equal to "all", then we define a first target
-  # that calls a script which re-enters make calling target all
-  if [ -n "$CPUSET" ] && [ "$CPUSET" != all ]; then
-(
-    cat << EOF
-
-all-with-cpuset:
-	@CPUSPEC="\$(CPUSET)" ./run-in-cgroup.sh \$(MAKE) all
-EOF
-) >> $MKFILE
-  fi
   # Drop in the main target 'all:' and the chapter targets with each sub-target
-  # as a dependency. Also prevent running targets in parallel.
+  # as a dependency.
 (
     cat << EOF
 
-.NOTPARALLEL:
+all:	ck_UID mk_SETUP mk_LUSER mk_SUDO mk_CHROOT mk_BOOT create-sbu_du-report mk_CUSTOM_TOOLS mk_BLFS_TOOL
-
-all:	ck_UID ck_terminal mk_SETUP mk_LUSER mk_SUDO mk_CHROOT mk_BOOT create-sbu_du-report mk_BLFS_TOOL mk_CUSTOM_TOOLS
-	@sudo env LFS=\$(MOUNT_PT) kernfs-scripts/teardown.sh
-EOF
-) >> $MKFILE
-# With systemd, the commands in chapter 9 do not create a
-# valid /etc/resolv.conf, so that if blfs_tools are installed, and
-# make-ca is run, it cannot connect. In this case, resolv.conf
-# from the host has been copied, and we need to remove it now.
-if [ "$INITSYS" = systemd ]; then
-(
-    cat << EOF
-	@sudo rm -v \$(MOUNT_PT)/etc/resolv.conf
-EOF
-) >> $MKFILE
-fi
-(
-    cat << EOF
 	@sudo make do_housekeeping
-	@echo $VERSION > lfs-release && \\
+	@echo "$VERSION - jhalfs build" > lfs-release && \\
-	sudo mv lfs-release \$(MOUNT_PT)/etc && \\
+	sudo mv lfs-release \$(MOUNT_PT)/etc
-	sudo chown root:root \$(MOUNT_PT)/etc/lfs-release
-	@/bin/echo -e -n \\
-	DISTRIB_ID=\\"Linux From Scratch\\"\\\\n\\
-	DISTRIB_RELEASE=\\"$VERSION\\"\\\\n\\
-	DISTRIB_CODENAME=\\"$(whoami)-jhalfs\\"\\\\n\\
-	DISTRIB_DESCRIPTION=\\"Linux From Scratch\\"\\\\n\\
-	> lsb-release && \\
-	sudo mv lsb-release \$(MOUNT_PT)/etc && \\
-	sudo chown root:root \$(MOUNT_PT)/etc/lsb-release
-	@/bin/echo -e -n \\
-	NAME=\\"Linux From Scratch\\"\\\\n\\
-	VERSION=\\"$VERSION\\"\\\\n\\
-	ID=lfs\\\\n\\
-	PRETTY_NAME=\\"Linux From Scratch $VERSION\\"\\\\n\\
-	VERSION_CODENAME=\\"$(whoami)-jhalfs\\"\\\\n\\
-	> os-release && \\
-	sudo mv os-release \$(MOUNT_PT)/etc && \\
-	sudo chown root:root \$(MOUNT_PT)/etc/os-release
 	@\$(call echo_finished,$VERSION)
 
 ck_UID:
@@ -355,174 +335,89 @@ ck_UID:
 	  exit 1; \\
 	fi
 
-ck_terminal:
-	@stty size | ( read L C; \\
-	if (( L < 24 )) || (( C < 80 )) ; then \\
-	  echo "--------------------------------------------------"; \\
-	  echo "Terminal too small: \$\$C columns x \$\$L lines";\\
-	  echo "Minimum: 80 columns x 24 lines";\\
-	  echo "--------------------------------------------------"; \\
-	  exit 1; \\
-	fi )
-
 mk_SETUP:
 	@\$(call echo_SU_request)
-	@sudo make save-luser
 	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
 	@touch \$@
 
 mk_LUSER: mk_SETUP
 	@\$(call echo_SULUSER_request)
-	@\$(SU_LUSER) "make -C \$(MOUNT_PT)/\$(SCRIPT_ROOT) BREAKPOINT=\$(BREAKPOINT) LUSER"
+	@( sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) LUSER" )
-	@sudo make restore-luser
+	@sudo make restore-luser-env
 	@touch \$@
 
 mk_SUDO: mk_LUSER
-	@sudo rm -f envars
 	@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
 	@touch \$@
 
-mk_CHROOT: mk_SUDO devices
+mk_CHROOT: mk_SUDO
 	@\$(call echo_CHROOT_request)
-	@( sudo \$(CHROOT1) -c "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CHROOT")
+	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CHROOT")
 	@touch \$@
 
-mk_BOOT: mk_CHROOT devices
+mk_BOOT: mk_CHROOT
 	@\$(call echo_CHROOT_request)
-	@( sudo \$(CHROOT1) -c "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) BOOT")
+	@( sudo \$(CHROOT2) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) BOOT")
 	@touch \$@
 
-mk_BLFS_TOOL: create-sbu_du-report devices
+mk_CUSTOM_TOOLS: create-sbu_du-report
-	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
-	  \$(call sh_echo_PHASE,Building BLFS_TOOL); \\
-	  (sudo \$(CHROOT1) -c "make -C $BLFS_ROOT/work"); \\
-	fi;
-	@touch \$@
-
-mk_CUSTOM_TOOLS: mk_BLFS_TOOL devices
 	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
 	  \$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
 	  sudo mkdir -p ${BUILDDIR}${TRACKING_DIR}; \\
-	  (sudo \$(CHROOT1) -c "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS"); \\
+	  (sudo \$(CHROOT2) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS"); \\
 	fi;
 	@touch \$@
 
-devices: ck_UID
+mk_BLFS_TOOL: mk_CUSTOM_TOOLS
-	sudo env LFS=\$(MOUNT_PT) kernfs-scripts/devices.sh
+	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
-EOF
+	  \$(call sh_echo_PHASE,Building BLFS_TOOL); \\
-) >> $MKFILE
+	  sudo mkdir -p $BUILDDIR$TRACKING_DIR; \\
-# With systemd, the commands in chapter 9 do not create a
+	  (sudo \$(CHROOT2) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) BLFS_TOOL"); \\
-# valid /etc/resolv.conf, so that if we want to enter chroot,
+	fi;
-# and systemd has not yet been run (otherwise /etc/resolv.conf
+	@touch \$@
-# exists), we just copy resolv.conf from the host.
-if [ "$INITSYS" = systemd ]; then
-(
-    cat << EOF
-	if ! [ -e \$(MOUNT_PT)/etc/resolv.conf ]; then \\
-	  sudo cp -v /etc/resolv.conf \$(MOUNT_PT)/etc; \\
-	  sudo touch \$(MOUNT_PT)/etc/.host-resolvconf; \\
-	fi
-EOF
-) >> $MKFILE
-fi
-(
-    cat << EOF
 
-teardown:
-	sudo env LFS=\$(MOUNT_PT) kernfs-scripts/teardown.sh
-EOF
-) >> $MKFILE
-# With systemd, the commands in chapter 9 do not create a
-# valid /etc/resolv.conf, so that if we want to enter chroot,
-# and systemd has not yet been run (otherwise /etc/resolv.conf
-# exists), we just copy resolv.conf from the host.
-# We need to remove it now, if it has been created.
-if [ "$INITSYS" = systemd ]; then
-(
-    cat << EOF
-	if [ -e \$(MOUNT_PT)/etc/.host-resolvconf ]; then \\
-	  sudo rm -v \$(MOUNT_PT)/etc/resolv.conf; \\
-	  sudo rm -v \$(MOUNT_PT)/etc/.host-resolvconf; \\
-	fi
-EOF
-) >> $MKFILE
-fi
-(
-    cat << EOF
 
-chroot1: devices
+SETUP:        $chapter4
-	-sudo \$(CHROOT1)
+LUSER:        $chapter5
-	\$(MAKE) teardown
+SUDO:         $runasroot
-
+CHROOT:       SHELL=/tools/bin/bash
-chroot: devices
+CHROOT:       $chapter6
-	-sudo \$(CHROOT1)
+BOOT:         $chapter78
-	\$(MAKE) teardown
-
-SETUP:        $SETUP_TGT
-LUSER:        $LUSER_TGT
-SUDO:         $SUDO_TGT
-EOF
-) >> $MKFILE
-# With systemd, the commands in chapter 9 do not create a
-# valid /etc/resolv.conf, so that if blfs_tools are installed, and
-# make-ca is run, it cannot connect. We just copy resolv.conf
-# from the host. We'll remove it at the end.
-if [ "$INITSYS" = systemd ]; then
-(
-    cat << EOF
-	@cp -v /etc/resolv.conf \$(MOUNT_PT)/etc
-
-EOF
-) >> $MKFILE
-fi
-(
-    cat << EOF
-CHROOT:       SHELL=\$(filter %bash,\$(CHROOT1))
-CHROOT:       $CHROOT_TGT
-BOOT:         $BOOT_TGT
 CUSTOM_TOOLS: $custom_list
+BLFS_TOOL:    $blfs_tool
+
 
 create-sbu_du-report:  mk_BOOT
 	@\$(call echo_message, Building)
 	@if [ "\$(ADD_REPORT)" = "y" ]; then \\
-	  sudo ./create-sbu_du-report.sh logs $VERSION $(date --iso-8601); \\
+	  ./create-sbu_du-report.sh logs $VERSION; \\
 	  \$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
-	fi
+	fi;
 	@touch  \$@
 
-save-luser:
+restore-luser-env:
 	@\$(call echo_message, Building)
-	@LUSER_ID=\$\$(grep '^\$(LUSER):' /etc/passwd | cut -d: -f3); \\
+	@if [ -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
-	if [ -n "\$\$LUSER_ID" ]; then  \\
+		mv -f \$(LUSER_HOME)/.bashrc.XXX \$(LUSER_HOME)/.bashrc; \\
-	    if [ ! -d \$(LUSER_HOME).XXX ]; then \\
+	fi;
-		mv \$(LUSER_HOME){,.XXX}; \\
+	@if [ -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
-		mkdir \$(LUSER_HOME); \\
+		mv \$(LUSER_HOME)/.bash_profile.XXX \$(LUSER_HOME)/.bash_profile; \\
-		chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME); \\
+	fi;
-	    fi; \\
+	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bash*
-	    echo "\$\$LUSER_ID" > luser-id; \\
-	    echo User \$(LUSER) exists with ID \$\$LUSER_ID; \\
-	else \\
-	    rm -f luser-id; \\
-	    echo User \$(LUSER) does not exist; \\
-	    echo It will be created with book instructions.; \\
-	fi
-	@\$(call housekeeping)
-
-restore-luser:
-	@\$(call echo_message, Building)
-	@if [ -f luser-id ]; then \\
-		rm -rf \$(LUSER_HOME); \\
-		mv \$(LUSER_HOME){.XXX,}; \\
-		rm luser-id; \\
-	else \\
-		userdel \$(LUSER); \\
-		groupdel \$(LGROUP); \\
-		rm -rf \$(LUSER_HOME); \\
-	fi
 	@\$(call housekeeping)
 
 do_housekeeping:
-	@-rm -f /tools
+	@-umount \$(MOUNT_PT)/sys
+	@-umount \$(MOUNT_PT)/proc
+	@-umount \$(MOUNT_PT)/dev/shm
+	@-umount \$(MOUNT_PT)/dev/pts
+	@-umount \$(MOUNT_PT)/dev
+	@-rm /tools
+	@-if [ ! -f luser-exist ]; then \\
+		userdel \$(LUSER); \\
+		rm -rf \$(LUSER_HOME); \\
+	fi;
+
 
 EOF
 ) >> $MKFILE

LICENSE

@@ -1,19 +1,340 @@
-Copyright (C) 2005-2019, jhalfs team
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
 
-Permission is hereby granted, free of charge, to any person obtaining a copy
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-of this software and associated documentation files (the "Software"), to deal
+                       51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-in the Software without restriction, including without limitation the rights
+ Everyone is permitted to copy and distribute verbatim copies
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ of this license document, but changing it is not allowed.
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
 
-The above copyright notice and this permission notice shall be included in all
+			    Preamble
-copies or substantial portions of the Software.
 
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+  The licenses for most software are designed to take away your
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+freedom to share and change it.  By contrast, the GNU General Public
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+License is intended to guarantee your freedom to share and change free
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+software--to make sure the software is free for all its users.  This
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+General Public License applies to most of the Free Software
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+Foundation's software and to any other program whose authors commit to
-SOFTWARE
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.

Makefile

@@ -1,23 +1,35 @@
 # From the Build Scripts Written By: Jim Gifford <lfs@jg555.com>
 # Modified By: Joe Ciccone <jciccone@linuxfromscratch.org
 # Additional changes: George Boudreau <georgeb@linuxfromscratch.org>
-#                     Manuel Canales Esparcia
-#                     Pierre Labastie
 
+TOPDIR=$(shell pwd)
 CONFIG_CONFIG_IN = Config.in
 CONFIG = menu
 
 all: menuconfig
-	@$$(grep RUN_ME configuration 2>/dev/null | sed -e 's@RUN_ME=\"@@' -e 's@\"@@')
+#	@clear
+	@`grep RUN_ME configuration | sed -e 's@RUN_ME=\"@@' -e 's@\"@@' `
 
-menuconfig:
+$(CONFIG)/conf:
-	@cp -a configuration configuration.old 2>/dev/null || true
+	$(MAKE) -C $(CONFIG) conf
-	@CONFIG_="" KCONFIG_CONFIG=configuration \
+
-	    python3 $(CONFIG)/menuconfig.py $(CONFIG_CONFIG_IN)
+$(CONFIG)/mconf:
+	$(MAKE) -C $(CONFIG) ncurses conf mconf
+
+menuconfig: $(CONFIG)/mconf
+	@$(CONFIG)/mconf $(CONFIG_CONFIG_IN)
+
+config: $(CONFIG)/conf
+	@$(CONFIG)/conf $(CONFIG_CONFIG_IN)
 
 # Clean up
 
 clean:
 	rm -f configuration configuration.old error
+	- $(MAKE) -C $(CONFIG) clean
 
-.PHONY: all menuconfig clean
+clean-target:
+	rm -f error
+	- $(MAKE) -C $(CONFIG) clean
+
+.PHONY: all menuconfig config clean clean-target

README

@@ -1,371 +1,208 @@
+$Id$
+
 1. INTRODUCTION::
 
-      The scripts in this directory implement an automation of the building
+     This collection of scripts, known as jhalfs, strives to create
-   of a GNU/LInux system, as described in the Linux From Scratch book series.
+  accurate makefiles from the Linux From Scratch book series XML files.
-   The name of the project is jhalfs: in that name, "alfs" stands for
+  This software is an evolution of the original "jhalfs-0.2" code developed
-   "automated linux from scratch", and the initials "jh" have been kept since
+  by Jeremy Huntwork.
-   the original "jhalfs-0.2" code developed by Jeremy Huntwork.
+
+     The usage of this script assumes you have read and are familiar with
+  the book(s) and, therefore, the configuration variables found in menuconfig
+  interface will have meaning to you.
 
   The list of supported books can be found at
-   http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks (maybe outdated,
+  http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks
-   current develoment books and latest version are always supported).
 
-      The documentation is split among various README.* files. Here is a list
+  NOTES::
-   of what is in which:
+  *.  The resulting Makefile takes considerable time to run to completion.
-      - README (this file): instructions to use the LFS book. This should be
+  Lay in a supply of caffeine beverages.
-        enough if you just want to build a base system as per the LFS book. It
-        is also a required reading for all the other projects.
-      - README.BLFS: instructions to install an automated build infrastructure
-        for the BLFS book. There are two ways to do so: (i) install the
-        tools at the end of an LFS build, or
-        (ii) install the tools on an already running system. Both methods are
-        described in that file.
-      - README.CUSTOM: instructions to run custom commands either during the LFS
-        build, or at the end of a LFS build. Note that you will not find
-        instructions on how to write those commands, but some examples are
-        available.
-      - README.PACKAGE_MANAGEMENT: instructions to use package management during
-        the build (Note: the only package manager that is regularly tested is
-        porg)
 
-      Other sources of information are the context help in the menu interface,
+  *.  It is recommended that you temporarily unpack your linux kernel,
-   and the LFS books themselves (both required readings of course!).
+  run <make menuconfig>, configure the kernel as per the book and save
+  the resulting .config file. This suggestion also applies to the
+  configuration of the uClibc package when building a HLFS system using
+  uClibc rather than glibc.
+
+  *.  Read carefully this file and the other README.* files before start
+  using the tool.
 
 2. PREREQUISITES::
 
-      It is strongly advised that you first build manually a complete system
+     To use this tool you MUST:
-   before attempting to automate the build.
+
+     - have experience building {c,h,b}LFS packages
+     - know how to edit and write shell scripts
+     - know how a Makefile works
+     - be able to trace build failures and to find what is causing it
+       (user error, package bug, {c,h,b}LFS command bug, or jhalfs code bug)
+
+     If you do not have the above skills, please don't use this tool.
 
-      Of course the "Host System Requirements" should be fulfilled. Some
-   supplementary packages are needed for using jhalfs. They are detailed
-   at the bottom of the page:
-   https://www.linuxfromscratch.org/alfs/download.html. In short, you need
-   wget, sudo, libxml2, libxslt, docbook-4.5-xml, and docbook-xsl-nons.
 
 3. INSTALLATION::
 
-      No installation is required. You may want to move the files in this
+     No installation is required. System-wide installation is not allowed.
-   directory to a convenient location, and then follow the instructions below.
 
 4. CONFIGURATION::
 
-   4.1. CONFIGURATION OF THE TOOLS:
+     We have installed the familiar menu based configuration tool driven by
-         There is no configuration of the tools themselves. The various
+     GNU make. see the section RUNNING, for details
-      parameters for the build are set through a menu driven interface. See
-      the section RUNNING below for details.
-
-   4.2. PRELIMINARY TASKS:
-         This tool has no support at all for creating a partition and a mount
-      point for the built system. You should follow the book up to the section
-      "Mounting the new partition". Note that the default name for the
-      partition mount point is "/mnt/build_dir", instead of /mnt/lfs.
-      You can change that default to anything you'd like in the menu, so you
-      may name it /mnt/lfs if you prefer . We'll use the name /mnt/build_dir
-      in the sequel.
-
-         For downloading packages, you can use the tool or download them
-      yourself. Even if using the tool, it is recommended to set up a source
-      repository where you store already downloaded packages. The tool will
-      automatically search a package in this repository before downloading it
-      if it is not found there. This repository cannot be the same as
-      /mnt/build_dir/sources. As an example, we'll use /usr/src. You should
-      arrange for the user running the tool to have write access to this
-      directory.
-
-         If you want to build the kernel as part of the automated build,
-      a configuration file must be provided. In order to do so, it is
-      recommended to download the kernel tarball, unpack it, run
-      <make menuconfig> (or any other *config), configure the kernel as per
-      the book, and save the resulting .config file to a location where it can
-      be retrieved later on. It is suggested to put it into the source
-      repository, with a versioned name, e.g.
-      /usr/src/config-<arch>-<kernel version>-<config details>.
-
-         Another file you may provide is the fstab file. As for the kernel
-      configuration, this file has to be prepared before running the menu.
-      You can copy-paste the file from the "Creating the /etc/fstab File"
-      page, then edit to suit the future lfs system layout, then save the
-      file. A convenient location and name is /usr/src/fstablfs.
-
-         At a more advanced level, you may want to supply custom commands
-      to be run at the end of LFS build. Scripts containing those commands
-      are located in the ./custom/config directory. Examples are given in
-      ./custom/examples. A template is provided as ./custom/template. See
-      README.CUSTOM for more details.
 
 5. RUNNING::
 
-   IMPORTANT::
+     The command <make> will launch a menu based configuration program. You will
+     recognize the layout from building the kernel or uClibc/BusyBox. The
+     underlying menu code was borrowed from BusyBox and slightly modified for
+     our use.
+
+     Help on parameter function is available from the on-line help. Please
+     make use of that feature for additional information not in this file.
+
+     Once you have set the parameters you wish and have saved your work the
+     jhalfs script is launch. The script verify first that the host can run
+     it and build the xLFS system, then validate the configuration and present
+     you with your selections which you may accept or reject.
+
+     If you accepted the displayed settings jhalfs will proceed to create the
+     Makefile, optionally download packages.
+
+     ::NEWS::
          You must be logged as a normal user with sudo privileges to run
-      the Makefile. Furthermore, you are supposed to have enough privilege
+         the Makefile.
-      to become any user. If you are not bothered about security issues,
-      the entry for the user running the tool in /etc/sudoers could be
-      <user> ALL=(ALL) NOPASSWD:ALL
-
-      The command <make> will launch a menu based configuration program,
-   similar to the kernel "menuconfig" configuration tool.
-
-      Help on parameter function is available from the on-line help (type the
-   character `?' after highlighting the parameter). Please do use the help:
-   it may contain additional information not duplicated in this file.
-
-   MENU "BOOK Settings"
-
-      Use BOOK: You have three choices: LFS System V, LFS systemd, BLFS.
-         The BLFS part is described in README.BLFS
-
-      Book version: You have two choices: "Branch" or "Working Copy"
-         Branch will have the tool clone the book's git repository. The
-      choice of the branch (actually any git commit) or of the file
-      location for the working copy is done in the next menu entry.
-
-      Multilib: Four choices: Normal LFS, Multilib with i686 libraries,
-      multilib with x32 libraries, multilib with all libraries.
-         It is recommended to use "Normal LFS" unless you know what you
-      are doing
-
-      Build method: two choices: chroot (as in book), boot
-         Presently, the "boot" method is not implemented, so keep the default.
-
-      Add blfs-tools support (see README.BLFS)
-         This will install the blfs tools onto the newly built system. It
-      is not the same thing as choosing the BLFS book in the menu, which
-      will install the blfs tools on the currently running system.
-
-      Add custom tools support (see README.CUSTOM)
-
-   MENU "General Settings"
-
-      Build Directory: the name of the root of the LFS system
-         This is the equivalent of the LFS variable in the book. Set it
-      to "/mnt/lfs" if you have followed the book for creating the LFS
-      partition and mount point.
-
-      Retrieve source files: Say y to have jhalfs download the packages
-         If you say no, you must download the packages yourself and put
-      them into the /mnt/build_dir/sources directory. Follow book's
-      chapter 3 instructions.
-         If you say yes, you'll be asked several other questions:
-         - Package Archive Directory: Repository of downloaded packages
-            This directory, which is on the host and should be writable
-         by the user running the tool, is for storing downloaded packages.
-            If you keep the default "$SRC_ARCHIVE", you can set this variable
-         to the absolute path of the repository and export it. Or if the
-         variable is not set, jhalfs downloads the sources directly to
-         /mnt/build_dir/sources.
-            Instead of using the SRC_ARCHIVE envar, you can also enter the
-         path of the repository directory into this field.
-         - Retry on 'connection refused' failure: self explanatory
-         - Number of retry attempts on download failures: self explanatory
-         - Download timeout (in seconds): self explanatory
-
-      Run the makefile: start the build immediately after running the tool
-         This is not the preferred method: it is recommended to rather
-      run "make -C /mnt/build_dir/jhalfs" after the tool has finished
-      setting up the build. But this may be handy if you are sure everything
-      is well, and want to leave the tool and the build run without
-      supervision.
-
-      Rebuild files: clean up the /mnt/build_dir directory
-         Say n if you want to rerun the tool (to update generated scripts
-      for example) without removing what has already been done. Otherwise,
-      say y. Note that there are some guards against removing a directory
-      containing useful things, but double check that the /mnt/build_dir
-      directory is really what you want to erase.
-
-   MENU "Build Settings"
-
-      MENU Parallelism settings
-       - Use all cores:
-            If you say y, MAKEFLAGS will be set to "-j$(nproc)" at the
-         beginning of each script. Other envars are supposed to be passed
-         from the environment, as done in new books. Note that for old books,
-         this means the scripts using make or ninja will be run with all
-         cores, but not when this needs to set special envars like
-         TESTSUITEFLAGS. You can still define the number of cores used
-         in next field.
-            If you say n, you'll be asked for a static number of threads
-         to use.
-       - set of cpus to use, or 'all' for all cpus (only if using all cores):
-            You can define here the cores you want to use. See help for
-         details. This is the preferred way of reducing the number of cores
-         rather than using a static thread number.
-       - Number of parallel `make' jobs (only if not using all cores):
-            Every occurrence of $(nproc) in new books will be replaced with
-         the number entered here. Also MAKEFLAGS will be set to "-jN" (where
-         N is the number entered) at the beginning of each scripts. Furthermore
-         NINJAJOBS will be set to N in the environment. This allows to run all
-         books with N threads, except for paarts that need other envars to be
-         set
-       - Build Binutils pass1 without parallelism (Real SBU)
-            The standard SBU is defined as the time to run the binutils-pass1
-         build with only one thread. Saying y here allows to get a value for
-         it. If you say n, the value is not meaningful for SBU measurements.
-
-      Run testsuites: say y to run the test suites
-         You'll have the choice between running all the test suites, or only
-      those deemed critical (binutils, gmp, mpfr, mpc, and gcc).
-
-      Package management: see README.PACKAGE_MANAGEMENT
-
-      Create a log of installed files for each package: self explanatory
-
-      Strip Installed Binaries/Libraries: use the book instructions for
-      stripping
-
-      DO NOT use/display progress_bar (self explanatory)
-
-   MENU System configuration
-
-      Use a custom fstab file:
-         If you say y, you'll have to provide a file containing the fstab
-      for the LFS system. See above "preliminary tasks".
-
-      Build the kernel:
-         If you say y, you'll be asked for a file containing the kernel
-      configuration. See above "preliminary tasks".
-
-      Install non-wide-character ncurses (rarely used nowadays):
-         If you say y, the system will use instructions in the note on the
-      ncurses page to install those libraries.
-
-      TimeZone: set to the result of "tzselect"
-
-      Language: set to the result of the instructions on "The Bash Shell
-      Startup Files" page.
-
-      Install the full set of locales: installs all the locales known to
-      glibc.
-
-      Groff page size: choice between "A4" and "Letter".
-
-      Hostname: self explanatory
-
-      Network configuration: various fields for setting network. Look at
-      chapter 9 for background.
-
-      Console configuration: various fields for setting console, as described
-      in chapter 9.
-
-   MENU Advanced features:
-
-      Optimization: Optimization settings are done by editing files in the
-      "optimize" directory. The menu just allows you to choose between applying
-      optimizations only to the final chapter or to all the book. Say n for
-      a normal build
-
-      Create SBU and disk usage report: self explanatory
-
-      Save temporary system work: self explanatory (see help)
-
-      Run comparison analysis on final stage: build the system several times
-      using the preceding one, to test whether it is able to rebuild itself
-      identically. Don't use normally...
-
-      Internal Settings (WARNING: for jhalfs developers only): says it all
-
-     Once you have set the parameters and saved the configuration, the script
-  is launched. Its aim is to extract instructions from the selected book
-  to generate scripts, and to generate a Makefile, which allows running
-  the scripts in the right order. The script verifies first that the host
-  can run itself and build the xLFS system, then validates the configuration
-  and lists the parameters. At this point, you may choose to quit or to
-  continue with the listed parameters. The script will then proceed to
-  generate the Makefile and the build scripts, optionally download
-  packages, and eventually verify the host prerequisite. If you have
-  selected "Run the makefile", the command <make> is launched in the
-  adequate directory, and the build begins. If not, you'll have to run
-  "make" manually, for example: "make -C /mnt/build_dir/jhalfs", if you
-  have used the default parameters (see the layout under $BUILDDIR in the
-  Q&A below).
 
      NOTE::
          If you run the jhalfs script directly the only function you can select
-      is to display the version number by running <./jhalfs -v>
+         is to display the version number running <./jhalfs -v>
 
-6. LAYOUT::
+6. BLFS_TOOL SUPPORT::
 
-        /BLFS/* (see README.BLFS)
+     For books that support it, there is an option to install blfs-tool and its
+     dependencies on the final system. The pre-made build dependencies
+     scripts has been written based on a LFS build. For CLFS and HLFS
+     builds you may need to adjust that scripts, that are found into the
+     common/blfs-tool-deps directory in the jhalfs sources tree.
+
+     WARNING:: If you add blfs-tool support on a CLFS Sysroot build
+               you MUST to edit the dependencies scripts to fix the
+               installation paths.
+               Be careful when you modify the scripts as you can
+               easily disable the host system.
+
+     After booting the new xLFS system some steps are needed to finish
+     blfs-tool installation:
+
+       - A user account must be created. You must be logged on that user
+         account to use blfs-tool.
+
+       - Move /blfs-root to that user's home and change ownership of the
+         directory and files to the user.
+
+       - Give the user read and write privileges over the $TRACKING_DIR
+         directory and the files that it contains.
+
+       - If you think that you may need the libxml2/libxslt Python modules,
+         remove the libxml2 and libxslt trackin files found in $TRACKING_DIR.
+
+       - Configure sudo, adding the needed privileges for the user.
+
+     We assume that blfs-tool will be used on a running fresh xLFS system.
+     To use it to build BLFS packages from the chroot jail is also possible,
+     but is for you to figure out how to do that.
+
+     To know how to blfs-tool works, see README.BLFS.
+
+7. LAYOUT::
+
+        /BLFS (see README.BLFS)
+
+        /CLFS/master.sh
+             /clfs.xsl
+
+        /CLFS2/master.sh
+              /clfs2.xsl
+
+        /CLFS3/master.sh
+              /clfs3.xsl
+
+        /HLFS/master.sh
+             /hlfs.xsl
 
         /LFS/master.sh
             /lfs.xsl
 
-        /common/chroot.xsl
+        /common/common_functions
-               /common_functions
-               /create-sbu_du-report.sh
-               /hostreqs.xsl
-               /kernfs.xsl
                /makefile_functions
                /packages.xsl
-               /progress_bar.sh
                /urls.xsl
+               /create-sbu_du-report.sh
+               /progress_bar.sh
+               /blfs-tool-deps/9xx-*
                /libs/func_*
 
-        /custom/examples/*
+        /custom/template
-               /config/* (needs to be created after cloning since it is an
+               /config/
-                          empty directory initially)
+               /examples/*
-               /template
+               /examples_CLFS-E/*
 
         /extras/do_copy_files
                /do_ica_prep
                /do_ica_work
-
+               /farce
-        /menu/*
+               /filelist
 
         /optimize/opt_config
                  /opt_override
                  /optimize_functions
                  /opt_config.d/noOpt
                               /noSymbols
-                              /O2pipe
                               /O3pipe
                               /O3pipe_march
                               /defOpt_fPIC
 
-        /pkgmngt/packageManager.xml.dpkg
+        /menu/*
-                /packageManager.xml.pacman
-                /packageManager.xml.porg
-                /packageManager.xml.template
-                /packInstall.sh.dpkg
-                /packInstall.sh.pacman
-                /packInstall.sh.porg
-                /packInstall.sh.template
 
-        CHEATSHEET
-        FUNCTION_LIST
-        LICENSE
         README
         README.BLFS
+        README.CLFS
+        README.HLFS
         README.CUSTOM
-        README.PACKAGE_MANAGEMENT
         TODO
+        LICENSE
 
         Config.in
-        jhalfs
         Makefile
+        jhalfs
+        blfs-tool
 
-7. FAQ::
+8. FAQ::
-    Q. "It doesn't work"
+    Q. "This 'help' file is very sparse"
-    A. There are several reasons why it may be so. One possibility is the
+    A. Yes, it is. This tool, jhalfs, is for those who understand the LFS books
-       following: jhalfs was designed to work against the development versions
+       and wish to automate the build. 99% of any problems that arise can be
-       of the LFS series of books. Consequently changes in a book sometimes
+       solved by reading the book(s).
-       break older versions of jhalfs. Before you start pulling out your hair,
+
-       download the latest version of jhalfs to see if that solves your
+    Q. "It doesn't work!"
-       problem. Note that it may be the other way around. If you want to build
+    A. Yes it does, try >> make
-       an old version of the book, you may have to downgrade your jhalfs
+       Remember you must have 'sudo' privileges.
-       version.
+
+    Q. "It still doesn't work"
+    A. jhalfs was designed to work against the development versions of the LFS
+       series of books. Consequently changes in a book(s) sometimes breaks older
+       versions of jhalfs. Before you start pulling out your hair download the
+       latest version of jhalfs to see if that solves your problem.
 
     Q. "How do I specify the build location?"
-    A. The original LFS document worked against the well known location
+    A. The original LFS document worked against the well known location /mnt/lfs.
-       /mnt/lfs. This script automates the build of all of the LFS series of
+       This script automates the build of all of the LFS series of books and uses
-       books and uses a generic location $BUILDDIR with a default value of
+       a generic location $BUILDDIR with a default value of /mnt/build_dir.
-       /mnt/build_dir. You may change this value to suit your needs.
+       You may change this value to suit your needs.
 
        The layout below $BUILDDIR is as follows.
        $BUILDDIR/
             jhalfs      (Makefile, cmd scripts, logs, etc..)
             sources     (where packages reside)
-            tools       (temporary cross compiler)
+            tools       (temporary bootstrap system)
+            cross-tools (temporary CLFS only)
                 ...
             FHS dir structure
                 ...
@@ -373,10 +210,10 @@
 
     Q. "What is the function of the SRC_ARCHIVE variable?"
     A. When jhalfs runs and packages download was selected, it creates a local
-       copy of the necessary packages in $BUILDDIR/sources by downloading the
+       copy of the necessary packages in BUILDDIR/sources by downloading the
        files. If the variable SRC_ARCHIVE is defined the software will first
        look in this location for the file and, if found, will copy it to
-       $BUILDDIR/sources.
+       BUILDDIR/sources.
        If the files are not found in SRC_ARCHIVE _and_ you have write priv to
        the directory any downloaded files will be mirrored there.
 
@@ -389,9 +226,37 @@
 
     Q. "Why have 2 copies of the files?"
     A. The package files must be visible during the chroot phase and this is a
-       simple and reliable method of doing so. This method also handles the
+       simple and reliable method of doing so. This method also handles the CLFS
-       boot build method where the final build may be done on a separate
+       boot build method where the final build may be done on a separate machine.
-       machine.
+
+    Q. "What is the function of "User account" and "Group account" menu settings?"
+    A. If you are running jhalfs from a low or non-privileged account you may not
+       have the priv to create/delete the user needed to build temporary tools.
+       These settings allow you to use your own user and group name to do that
+       build steps.
+
+       These variables are adjustable also when invoking make:
+
+         $BUILDDIR make LUSER=myaccount LGROUP=mygroup
+
+       The only changes to your account will be the creation of a NEW .bashrc
+       after saving your original to .bashrc.XXX
+
+    Q. "When I try to build CLFS the Makefile fails at the mid-point"
+    A. There could be numerous reasons for the failure but the most likely reason
+       is you are doing a cross-build using the 'chroot' method and the target is
+       not compatible with the host.  If you choose to build using the chroot
+       method a test is performed at the end of the temptools phase. If the test
+       succeeds the build continues inside a chroot jail. However if the test fails
+       it means the host and target are not compatible an you should use the
+       'boot' method to create your target code.
+       As an extreme example: You can build a sparc target on a x86 platform but
+       only the temptools phase. You must select the 'boot' method and not the
+       'chroot.' You must transfer the toolchain to a sparc platform, reboot the
+       sparc box and continue the build.
+       Of all the LFS series of books Cross-LFS requires the greatest
+       understanding of host/target hardware combination. Please read the book
+       carefully and don't skip the easy parts (there are none..)
 
     Q. "How could I stop the build at a predefined chosen point?"
     A. Launch the Makefile manually passing the last numbered target to be build
@@ -409,4 +274,3 @@
 Authors:
   George Boudreau
   Manuel Canales Esparcia
-  Pierre Labastie

README.BLFS

@@ -1,5 +1,11 @@
+$Id$
+
 1. INTRODUCTION::
 
+     If you want to add blfs-tool support into a xLFS base system build,
+  read the "BLFS_TOOL SUPPORT" section found in the README and be sure
+  to follow the after-booting installation intructions.
+
      To automate package builds from the BLFS book instructions is a huge
   task. Some of the issues are: the BLFS book isn't linear; some package
   pages use a custom layout; there are circular dependencies; several
@@ -7,160 +13,30 @@
   change based on what dependencies will be used, etc.
 
      That being said, the goal of the blfs-tool is to help you solve package
-  dependencies, create build scripts and a Makefile. Not all the auto-generated
+  dependencies, create build scripts and a Makefile. Few of the auto-generated
   build scripts and Makefile will work "as is", thus, as a general rule,
   you will need to review and edit the scripts while reading the book.
 
-     The blfs tools allow also to update packages from the LFS book. LFS
-  packages which may be updated appear in the menu interface. When selected,
-  their scriptlet is generated in the same manner as for BLFS packages.
-  (TODO: presently, when an LFS package needs a patch, you'll have to
-  donwload it manually to your $SRC_ARCHIVE directory (usually /sources)).
 
 2. PREREQUISITES::
 
-     In addition to a full LFS system, the following packages and their
+     To use this tool you MUST:
-  dependencies are needed by this tool:
-    - required: libxml2, libxslt, DocBook XML DTD
-    - recommended: wget (to download the package tarballs) and sudo (to build
-      as a user)
-    - optional: lynx (allows to read the generated linearized book), GPM (to
-      cut and paste commands from the book), git (to update the book
-      sources)
-  Note that the optional dependencies are recommended for ease of use of the
-  tool.
 
-     You should also have the following personal skills:
+     - have experience building BLFS packages
-    - Ability to write and debug shell scripts: as said in the introduction,
+     - know how to edit and write shell scripts
-      not all the generated scripts can be used directly. They need to be
+     - know how a Makefile works
-      edited to produce an error free build.
+     - be able to trace build failures and to find what is causing it
-    - Ability to debug build failures, like missing dependencies or
+       (user error, package bug, BLFS command bug, or jhalfs code bug)
-      installation directories not known to the system (when you install in
-      /opt for example).
-    - Ability to choose the tools you need to configure and administrate
-      your system: in the BLFS book, nothing is mandatory, nothing is
-      useless. You are on your own in choosing what to build, but wrong
-      decisions may lead to a non functional system...
 
-3. INSTALL::
+     If you do not have the above skills, please don't use this tool.
 
-     There are two ways to install the BLFS tools on an LFS system, described
-  in paragraphs 3.1 and 3.2, respectively:
 
-  3.1 INSTALLATION ON A RUNNING SYSTEM
+3. USAGE::
 
-     Select "Use Book --> Beyond Linux From Scratch" in the jhalfs menu:
+     Due the complexity of the BLFS book, the scripts and Makefile generation
-  The tools are installed in $HOME$BLFS_ROOT (the default for $BLFS_ROOT
+  is done in several steps:
-  is /blfs_root). The BLFS book is downloaded or copied to its directory.
-  The tracking directory (see below) is created (if it does not already
-  exist) and initialized. Before running "make", you should ensure the
-  tracking directory (default location /var/lib/jhalfs/BLFS) can be:
-    - either created by the user running "make", if it does not exist
-    - or that it is writable by the user running "make", if it exists.
 
-  After the intallation, you should perform the following additional steps:
+  3.1  INSTALLED PACKAGES TRACKING SYSTEM
-    - Configure sudo, adding the needed privileges for the user.
-    - Although it is not strictly necessary, it is recommended to install
-      the bash shell startup files (as per `3. After LFS Configuration
-      Issues' of the BLFS book), as some instructions in BLFS rely on
-      their being present.
-    - At this point, the tool has no way to know which versions of LFS packages
-      are installed, so that the menu interface will show all the LFS packages,
-      as if they were not installed. If you have a released version of LFS, or
-      the date of your GIT version of LFS is known, you should run the
-      update-lfs.sh script. If you have updated some
-      LFS packages since first installation, or have been using a custom
-      working copy of the LFS book, the only (tedious) way is to create
-      empty files with names <package>-<installed-version> in the tracking
-      directory, and run the tool.
-
-    - If you have also installed some BLFS packages, they are not in the
-      tracking file. The only way is to create empty files with names
-      <package>-<installed-version> in the tracking directory, and run the tool.
-
-  3.2 INSTALLATION ON A JUST BUILT LFS SYSTEM
-
-    For books that support it (only LFS),
-  there is an option to install the BLFS tools right after building
-  the LFS system: just tick `BOOK Settings/Add blfs-tool support' in
-  jhalfs configuration menu. The tools are installed in $BLFS_ROOT
-  (default /blfs_root) on the LFS system, and the dependencies are built
-  at the end of the jhalfs run, before the custom tools.
-
-  After booting the new LFS system some steps are needed to finish
-  the installation of the automated tools:
-
-    - A user account must be created. You must be logged on that user
-      account to use blfs-tool. This is not strictly necessary,
-      since the packages can be built as root, too, but it is
-      never a good idea to build packages as root.
-
-    - Move /blfs-root to that user's home and change ownership of the
-      directory and files to the user.
-
-    - Give the user read and write privileges over the $TRACKING_DIR
-      directory and the files that it contains.
-
-    - Configure sudo and add the bash shell startup files, as described
-      above
-
-    - Note that the versions of LFS packages are automatically known to
-      the tool in this case, and there is no need to run the update-lfs.sh
-      script.
-
-     We assume that the BLFS tools will be used on a booted LFS system.
-  Using them to build BLFS packages in a chroot jail is also possible,
-  but not supported.
-
-  3.3 DIRECTORY LAYOUT IN THE $BLFS_ROOT DIRECTORY
-
-    blfs-xml/*                  GIT tree of the selected BLFS book version
-    lfs-xml/*                   GIT tree of the selected LFS book version
-    lib/constants.inc           functions libraries
-       /func_dependencies         for building the dependency tree
-    menu/*                      menuconfig source code
-    xsl/gen_pkg_list.xsl        XSL stylesheet to generate the package database
-       /gen_config.xsl          XSL stylesheet to generate the Config.in file
-                                for use in the menuconfig system
-       /dependencies.xsl        XSL stylesheet to generate the dependency list
-                                of a package
-       /make_book.xsl           XSL stylesheet to generate the linear book.xml
-       /lfs_make_book.xsl       XSL stylesheet to incoporate LFS pages into the
-                                linear book.xml
-       /scripts.xsl             XSL stylesheet to generate the scriptlets from
-                                book.xml
-       /bump.xsl                XSL stylesheet to update the tracking file
-       /process-install.xsl     XSL stylesheet included by scripts.xsl, for
-                                outputting cleanly install instructions
-       /process-replaceable.xsl XSL stylesheet included by scripts.xsl, for
-                                generating correct instructions when a
-                                <replaceable> tag is encountered.
-    README.BLFS                 this file
-    TODO                        developers notes (well, not updated often)
-    gen_pkg_book.sh             resolves dependencies, generates a linear BLFS
-                                book, and finally generates build scripts
-    gen-makefile.sh             generates the target Makefile
-    progress_bar.sh             the target Makefile progress bar
-    gen-special.sh              Helper script for generating the package
-                                database
-    Makefile                    Used by make to update the package database
-                                from the GIT tree, then launch the menuconfig
-                                interface, and run gen_pkg_book.sh based on
-                                configuration settings
-    packdesc.dtd                a simple DTD describing the format of the
-                                package database and the tracking file.
-
-  Working files: several files are generated when first running the tool:
-
-    packages.xml            auto-generated package database
-    Config.in               input file for the menu driven choices
-    configuration           file generated by the menuconfig process
-    dependencies/*          files recording the dependency tree
-    book.xml                the linearized book
-    book-html/*             the linearized book rendered in html
-    scripts/*               the scriptlets
-
-  3.4 INSTALLED PACKAGES TRACKING SYSTEM:
 
        This tool includes a very simple tracking system to log which packages
     have been installed using the tool. It is used to skip installed packages
@@ -168,208 +44,197 @@
     updated in the BLFS book. Do not rely on this feature as a package
     management tool.
 
-       The tracking system itself is an XML file: instpkg.xml. It is
+       The directory where tracking files will be stored needs to be created
-    initialized when <make> is first run in blfs_root. It resides in a
+    before installing blfs-tool. You can place this directory anywhere, taking
-    directory, which is created when needed during the process of building
+    care that the user must have read and write privileges on that directory
-    custom tools or blfs dependencies, right after LFS. You can specify
+    and on all files it contains.
-    that directory location in the blfs-tools sub-menu of jhalfs. You may
-    need to update permissions and/or ownership of this directory before
-    using the blfs tool (see README in jhalfs).
 
-       The default location of the tracking directory is /var/lib/jhalfs/BLFS.
+       To use the default path set in the installation menu, run as root:
-    NB : after the initial build, that directory is only used to contain
-    instpkg.xml, unless custom tools have been built. In the latter case,
-    it also contains empty files whose name are "$PKG-$VERSION" for each
-    versionned package built. The information about those packages is
-    included into instpkg.xml the next time the tool is run.
 
-4. USAGE::
+    install -d -m1777 /var/lib/jhalfs/BLFS
+
+  3.2  BLFS_TOOL INSTALLATION::
+
+       Run "make" to launch the jhalfs menuconfig interface. Select the BLFS
+    book and version. Then set the installation directory (default
+    $HOME/blfs_root), the BLFS sources directory (default blfs-xml), and
+    the installed packages tracking directory (default /var/lib/jhalfs/BLFS).
+
+       All required files will be placed in the installation directory and
+    BLFS XML sources will be installed in the named sub-directory.
+
+       Installed files:
+
+    blfs-xml/*         SVN tree of the selected BLFS book version
+    lib/*              functions libraries, xsl stylesheets, and auto-generated
+                       meta-packages dependencies tree files
+    menu/*             lxdialog and menuconfig source code
+    README.BLFS        this file
+    TODO               developers notes
+    update_book.sh     update the XML book sources and regenerates packages
+                       database and meta-packages dependencies tree
+    gen_config.sh      regenerates Config.in
+    gen_pkg_book.sh    resolves dependencies and generates linear BLFS books
+                       and build scripts
+    gen-makefile.sh    generates the target Makefile
+    progress_bar.sh    the target Makefile progress bar
+    Makefile           run gen_config.sh to update Config.in,
+                       then launch the menuconfig interface, and lastly run
+                       gen_pkg_book.sh based on configuration settings
+    Config.in          menuconfig interface input file
+    packages           auto-generated packages database
+    envars.conf        envars needed when running the target build scripts
 
        From now on, all the work must be done from inside the installation
     root directory.
 
-       Due to the complexity of the BLFS book, the scripts and Makefile
+       When finished the installation, the configuration and target selection
-    generation is done in several steps:
+    menu is launch.
 
-  4.1  UPDATING BOOK SOURCES::
+  3.3  UPDATING BOOK SOURCES::
 
        If you are using the development book version and you want to update
     installed packages to the latest version found in that book, you need to
-    update the XML sources and packages database. To do that, run
+    update the XML sources and packages database.
-    "make update". This is not necessary if you just built LFS, and you
+
-    can skip to step 4.2.
+       To do that run "./update_book.sh"
 
        On the next configuration run, packages already installed but listed
     with a new version in the book will be available for target selection
     and used to solve dependencies.
 
-  4.2  CONFIGURING AND PARSING THE BOOK::
+  3.4  CONFIGURING AND PARSING THE BOOK::
 
        The next step is to create a book and build scripts in dependency
-    build order for one or several packages.
+    build order for a target package. A target can be a package or a
+    meta-package.
+
+    WARNING:
+           Only one target (meta-package or individual package) must be
+           selected on each configuration run.
+	   There is no way to solve dependencies properly when more
+           than one target are selected.
 
        Run <make> to launch the configuration interface. The main menu contains
-    four blocks: individual package selection, Build settings, Build layout,
+    three blocks: meta-package selection, individual package selection, and
-    and Optimization.
+    build options.
 
-       In the package selection block, menus and submenus are organized
+       When a meta-package is selected, it is possible to unselect unwanted
-    as the book's parts, chapters and sections. You can navigate those menus
+    components. The unselected components will be skipped if no other components
-    and select as many targets as you want. But we suggest to not select
+    depends on them.
-    too many at a time to be able to sort issues!
 
-       In the "Build settings" submenu, the dependency level and default
+       In the build options section, the dependencies level and default packages
-    packages used to solve alternatives are set (currently, only for the MTA).
+    used to solve alternatives are set. You can also select whether the build will
-    You can also select whether the build will be made as a normal user or as
+    be made as a normal user or as root. That settings are saved to be reused in
-    root, whether to use "porg style" package management, whether to remove
+    future configuration runs.
-    ".la" files, and wheter statistics for the package are generated (build
-    time, memory footprint and "DESTDIR" install). If you use package
-    management, you have to enter the path to the packInstall.sh script too.
 
-       In the "Build layout" submenu, you can select where the source tarballs
+       If, for example, your target selection is Xsoft-->Graphweb-->galeon, a
-    reside and are downloaded, where the packages are built, and whether to
+    directory named "galeon" will be created. Inside that directory you will
-    keep the build tree after installation.
+    find a directory named "HTML" that contains a galeon-based HTML book with
+    its dependencies in build order, and a "scripts" directory with build
+    scripts for that packages.
 
-       In the "Optimization" submenu, you can select the number of parallel
+       There are also two other directories ("dependencies" and "xincludes")
-    jobs, and set the usual CFLAGS, CXXFLAGS, and LDFLAGS. the special
+    that contain files generated while resolving dependencies trees.
-    keyword "EMPTY" can be used for those flags to ensure they are unset.
 
-       Note that there are help strings associated to those menus. Please
+  3.5  EDITING BUILD SCRIPTS
-    read them for details!
 
-       Those settings are saved to be reused in future configuration runs.
+       Now it is time to review the generated book and scripts, making any changes
-
+    to the scripts necessary to fix generation bugs or to suit your needs.
-       When you are done with the menu, a few checks occur, and the dependency
-    chain is generated. Each dependency appears with its priority (required,
-    recommended, optional, or external), and it's level. There is a root level
-    1. The selected packages have level 2. The dependencies of selected packages
-    have level 3, the dependencies of the dependencies have level 4, and so on.
-    When circular dependencies are found, they appear with a priority of
-    "circular". This means that two (or more) dependency chains arrive at the
-    same package. The algorithm chooses the chain with the highest priority and
-    reorders dependencies to remove the other chain(s). This is not always the
-    solution an user would prefer, but we have found no way to do it better.
-
-       You end up with a book.xml file which contains the linearized book,
-    and a rendered HTML, in the directory book-html, which you can browse with
-    "lynx book-html/index.html" (or with any other browser).
-
-       Furthermore, there is a directory "scripts", which contains the generated
-    scriptlets.
-
-       There is yet another directory, "dependencies" that contains files
-    generated while resolving dependencies.
-
-  4.3  EDITING BUILD SCRIPTS::
-
-       Now it is time to review the generated book and scripts, making any
-    changes to the scripts necessary to fix generation bugs or to suit your
-    needs.
 
        Scripts for additional packages (i.e., for non-BLFS packages) can be
     easily inserted. For example, if you want to install the external dependency
     "bar" before "foo" package and the "foo" script is named "064-z-foo", you
-    just need to create a "064-y-bar" build script.
+    need to create a "064-y-bar" build script.
 
       Remember, the package tracking system isn't a package management tool
     and knows nothing about packages not in the BLFS book.
 
-  4.4  CREATING THE MAKEFILE::
+      Also, review and edit envars.conf. This file is used to set global envars
+    needed by the build scripts.
+
+  3.6  CREATING THE MAKEFILE
 
        When the build scripts are ready to be run, the Makefile can be
-    created. Create an empty subdirectory (for example "mkdir work") and cd
+    created. Be sure that you cd into the "package" directory and run
-    to that directory. Then run ../gen-makefile.sh. Note that the directory
+    ../gen-makefile.sh
-    is completely emptied before generating the Makefile, so to prevent
-    erasing useful data, the script ensures that the name of the current
-    working directory starts with "work".
 
-    Review the Makefile, and, if all looks sane, start the build by running
+    Review the Makefile, and, if all looks sane, start the build.
-    "make".
 
-5. GENERATED BUILD SCRIPTS ISSUES::
+4. GENERATED BUILD SCRIPTS ISSUES::
 
       In this section, known issues with the generated build scripts are
-   discussed. They are due to build procedures and/or BLFS layout
+   discussed. They are due to build procedures and/or BLFS layout particularities
-   particularities that we can't handle. In several cases, editing the
+   that we can't handle. In several cases, editing the build scripts is mandatory.
-   build scripts is mandatory.
    You may also need to insert some build scripts created by you to resolve
-   unhandled dependencies and/or to remove some script installing an unneeded
+   unhandled dependencies and/or to remove some script installing the affected
-   package (unneeded packages may be pulled in the dependency chain, if
+   package by hand.
-   they occur as an "or" with another package).
-      When there are circular dependencies (only one known in BLFS 8.0 for
-   recommended dependencies), you may need to move around scripts so that they
-   run in the order script-A script-B script-A. This involves copying script-A
-   to another name (using the xxx-a- fields), and possibly renaming the xxx-a-
-   fields of each involved script.
 
-   5.1  BLFS BOOTSCRIPTS::
+   4.1  BLFS BOOTSCRIPTS
 
-        Normally, bootscript installation should work. On the other hand, the
+        For now, bootscripts installation will fail. You will need to edit
-     book does not give instruction for running them, so you might have to
+     the scripts for packages that install bootscripts and fix their
-     manually insert "/etc/init.d/rc.d/<initscript> start" at some place during
+     installation command. That could be fixed in the future.
-     the build.
 
-   5.2  PACKAGE CONFIGURATION::
+   4.2  PACKAGE CONFIGURATION
 
         For those packages that have a "Configuration" section, you should
-     edit the build script to fit the needs of your system. Sometimes, the
+     edit the build script to fit the needs of your system.
-     bash startup files are modified. The generated scripts contain a
-     line 'source /etc/profile', which ensures that the proper environment
-     variables are used.
 
-   5.3  PAGES WITH TWO OR MORE PACKAGES::
+   4.4  PDL, Perl modules, and Glib-Bindings.
 
-        For example: sane, poppler, audacious, freetts, which, etc.
+        The generated scripts for these packages are broken and can not
+     be fixed. You must rename it as the sub-package to be installed and
+     edit it to use the proper commads for that sub-package.
 
-        On the pages for those packages, the BLFS book actually has instructions
+        You may need to create additional scripts for these sub-package
+     dependencies, if any.
+
+   4.4  GCC, JDK, Sane, and KDE-multimedia, freetype2, MesaLib and others
+
+        On the pages for these packages, the BLFS book actually has instructions
      to download and install two or more packages. You must edit the scripts to
-     fix this. A common pitfall is that the variable PACKAGE may be used for
+     fix this.
-     several tarballs. Be sure to save the PACKAGE variable to some other
-     name (for example PKG1, PKG2, etc) after each download. The unpacking
-     instructions may need to be repeated for each tarball in turn.
 
-   5.4  XORG7
+        We will try to fix some of them, but this may not be possible.
 
-        The book has special page layouts for the Xorg7 packages. The tool
+   4.5  XORG7
-     breaks those pages into individual pages for each packages in the linear
-     book. Also, the menu gives the choice to select each package individually.
 
-        To build the whole Xorg7 chapter, select xinit. The (recommended)
+        The generated scripts for Xorg7 pseudo-packages have $SRC_ARCHIVE
-     dependency chain brings in the whole set of Xorg packages.
+     support for individual packages, but not for patches nor *.wget and *.md5
+     files.
 
-   5.5  PATCHES
+        If you have previously downloaded the patches, you must edit
+     the scripts to use your local packages.
 
-        Please, make sure that all scripts have the commands to download/apply
+       The *.wget and *.md5 files should be downladed always from inside
-     the required patches. Due to book layout issues, some patches may be
+     the scripts to be sure that the most current individual packages are
-     missing (as of BLFS 8.0, all the patches seem to be downloaded).
+     used. Thus don't reuse previouly existing ones.
 
-   5.6  ROOT COMMANDS
+       In the script for xorg7-font, be sure to move the fonts directories
+     symlinks creation to after the "for ... done" loop.
+
+   4.6  PATCHES
+
+        By default, all required patches will be downloaded from the NET.
+
+        If you have previously downloaded the patches, you must edit the
+     scripts to use your local patches.
+
+        Also, be sure that all scripts have the commands to download/apply the
+     required patches. Due to book layout issues, some patches may be missing.
+
+   4.7  ROOT COMMANDS
 
         If building as a normal user (the default setting), be sure that all
      commands that require root privileges are run using sudo. Also make sure
-     necessary root privilege commands are visible in your PATH. The scripts
+     necessary root privilege commands are visible in your PATH.
-     ensure that /usr/sbin is appended to the user's PATH when running
-     privileged commands.
-
-        For commands necessitating root privileges, the generated scripts wrap
-     them with the construct:
-       sudo -E sh -e << ROOT_EOF
-         <commands to be executed as root with `$', ``', and `\' escaped>
-       ROOT_EOF
-     The "-e" switch to sh ensures the command block exits with error if an
-     error occurs. The "-E" switch to sudo ensures the whole environment is
-     passed to the commands to be run with root privileges. It is effective
-     only if the /etc/sudoers file contains `Defaults setenv', or SETENV in
-     the user attributes (this is implicit if the command the user is allowed
-     to run is `ALL'). If you think it is a security issue, you may forbid
-     this flag in /etc/sudoers, but then, you have to un-escape `$' for
-     variables coming from the environment in the instructions. Although this
-     construct is rather strong, it can fail in some corner cases, so
-     carefully review those instructions.
 
         Due to book layout issues, some sudo commands may be missing.
 
-   5.7  OTHERS
+   4.8  OTHERS
 
         There may be other issues that we are not aware of. If you find
      any, please report it to <alfs-discuss@linuxfromscratch.org>.
 
+

README.CLFS

@@ -0,0 +1,44 @@
+# $Id$
+
+       CLFS-1.x NOTES
+
+  None for now.
+
+
+
+       CLFS SYSROOT METHOD NOTES
+
+  .- If you want to install additional custom packages via "Add custom tools
+  support" and/or select "Add blfs-tool support", be sure to review and edit
+  their packages build scripts to follow the sysroot build method or you will
+  end messing your host system. Be very careful with this.
+
+  .- If you install additional packages not using the "Add custom tools support"
+  feature (i,e, you will install it manually after finished the Makefile run)
+  you will need to run manually the "Changing the Ownership Of The CLFS System"
+  phase commands found in the book.
+
+
+
+       CLFS EMBEDDED SYSTEMS NOTES
+
+  .- Mips, WRT and ARM builds are broken due a book bug on the uClibc
+  *ENDIAN* configuration settings.
+
+  .- To install CBLFS packages you must to use the "Add custom tools support"
+  feature. To learn how it works and how to use it, see the section titled
+     "Adding Post-System Build Configuration Files and Extra Packages"
+  found in README.CUSTOM. That is also applicable to bootloaders installation.
+
+  .- If you install additional packages not using the "Add custom tools support"
+  feature (i,e, you will install it manually after finished the Makefile run)
+  you will need to run manually the "Changing the Ownership Of The CLFS System"
+  phase commands found in the book.
+
+  .- If your target is a MIPS wireless router, you must to select "mips" as
+  your target architecture and "WRT - MIPS based wireless route" as your
+  hardware platform.
+
+  .- The backup & clean-up phases aren't run. This is to allow users to
+  review the installed files and do a more in-deeper clean-up before creating
+  the system tarball.

README.CUSTOM

@@ -1,21 +1,25 @@
+#
+# $Id$
+#
 	HOW TO ADD CUSTOM SCRIPTS TO THE JHALFS MAKEFILE
 
 
   Normally JHALFS creates a Makefile containing only those scripts found in
-the {,B}LFS books. An automated construction tool cannot predict the
+the {B,C,H}LFS books. An automated construction tool cannot predict the
 needs of every individual and requests are made "Can you add xxxx package".
 Rather than adding numerous package scripts and switches for each request it
 was easier to add a tool for the user(s) to code their own package needs.
 
-  There are two areas that can be customized: how the base system is built
+  There is two areas that can be customized: how the base system is build
-and what additional configurations and packages your hardware requires to be
+and what additional configurations and packages requires your hardware to can
-able to boot and run. Each of those areas are handled in a different way.
+boot and work with. Each one of this areas is handled in a different way.
+
 
 
 
         BASE SYSTEM CUSTOMIZATION
 
-  There are two ways to alter how the base system will be built:
+  There is two ways to alter how the base system will be built:
 
   - Using a working copy of the book sources and editing the XML files.
     This is the way used by book editors to test packages upgrades,
@@ -24,22 +28,22 @@ able to boot and run. Each of those areas are handled in a different way.
     This method requires you know very well the book sources and what
     files need be edited. It will not be discussed here.
 
-  - Editing the generated build scripts to make any change you want.
+  - Editing the generated build scripts to make any change you would.
     This is the method discussed below.
 
 
   EDITING THE BASE SCRIPTS
 
-  To begin with, the build scripts should be generated with book defaults. To
+  First step is to generate the build scripts with book defaults. To do that,
-do that, configure jhalfs activating any option you want included, but do not
+configure jhalfs activating any option you want included, but do not select
-select "Run the Makefile" option.
+"Run the Makefile" option.
 
-  Under the ${BUILD_DIR}/${SCRIPT_ROOT}/$COMMANDS directory
+  Under the ${BUILD_DIR}/${SCRIPT_ROOT}/${PROGNAME}-commands directory
 (using the defaults values to do an LFS build, that directory name is
 /mnt/build_dir/jhalfs/lfs-commands) you will find the default build scripts.
 
   If all you want is modify, add, or remove some command from a package
-installation, for example to change its ./configure line, just edit the related
+installation, for example to change it ./configure line, just edit the related
 script. If changing or adding a patch, be sure to copy the new patch to the
 ${BUILD_DIR}/sources directory. When done, run 'make' from inside the
 ${BUILD_DIR}/${SCRIPT_ROOT} directory.
@@ -49,38 +53,39 @@ ${BUILD_DIR}/${SCRIPT_ROOT} directory.
 
   To remove a package from the system, just remove its script(s).
 
-  To change the version of some package, or to build a newer or older version
+  To change the version of some package to build a newest or oldest one than the
-than that in the book, edit ${BUILD_DIR}/${SCRIPT_ROOT}/pkg_tarball_list to
+one found in the book, edit ${BUILD_DIR}/${SCRIPT_ROOT}/pkg_tarball_list to
-change its tarball name and place the new tarball in the ${BUILD_DIR}/sources
+change it tarball name and place the new tarball in the ${BUILD_DIR}/sources
-directory.
+directory,
 
   To replace a package by an equivalent one, rename the replaced package script
 to reflect the new package name (for example, 102-man-db -> 102-man), edit the
-script to make the required commands changes, place the new tarball in the
+script to made the required commands changes, place the new tarball in the
 ${BUILD_DIR}/sources directory, and edit ${BUILD_DIR}/${SCRIPT_ROOT}/pkg_tarball_list
-file to replace the removed package tarball name by the new package tarball
+file to replace the removed package tarball name by the new package tarball name.
-name.
 
   To change the build order, rename the scripts changing the first 3-digits
-string until they are sorted in the way you want.
+string until have it ordered in the way you want.
 
-  To insert a new package, for example to build Cracklib in order to build
+  To insert a new package, for example to build Cracklib to can build Shadow
-Shadow with Cracklib support, you should first decide before what package it
+with Cracklib support, first you should decide before what default package it
-needs to be installed, in this example 107-shadow. Then create a new script
+need be installed, in this example before 107-shadow. Then create a new script
-containing the needed commands, using an existing one as template, and name it
+containing the needed commands, using an existing one as template, and name it with
-with the same 3-digits string used for that mentioned default package, but
+the same 3-digits string used for that mentioned default package, but adding
-adding another 1-digit string. In our example, the new script to build Cracklib
+another 1-digit string. In our example, the new script to build Cracklib just
-before Shadow will be named 107-1-cracklib. This naming scheme allows inserting
+before Shadow will be named 107-1-cracklib. This naming schema allow to insert
-up to 10 scripts before each of the existing scripts. Place the tarball for
+up to 10 scripts before each one of the default scripts. Place the tarball for
-the new package and required patches, if any, in ${BUILD_DIR}/sources and edit
+the new package and required patches, if any, if ${BUILD_DIR}/sources and edit
 ${BUILD_DIR}/${SCRIPT_ROOT}/pkg_tarball_list to add the tarball name for that
 package.
 
-  When ready, launch again the jhalfs configuration interface. Make sure that
+  When ready, launch again the jhalfs configuration interface. Be sure that
-exactly the same options are selected as when generating the default build
+are selected exactly the same options than when generating the default build
-scripts. Be sure that "Rebuild files" is unselected and select "Run the
+scripts. Be sure that "Rebuild files" is unselected and select "Run the Makefile"
-Makefile" if you want. Then select "Rebuild the Makefile". This will create a
+if you want. Then select "Rebuild the Makefile". This will create a new Makefile
-new Makefile based on the changes you made to the build scripts.
+based on the changes you made to the build scripts.
+
+
 
 
        ADDING POST-SYSTEM BUILD CONFIGURATION FILES AND EXTRA PACKAGES
@@ -91,27 +96,35 @@ more info.
 
   The feature described below was added so users could install remaining
 configuration files, build the packages necessary to access the Internet
-or to support specific hardware, or to install basic utilities that are
+or to support specific hardware, or to install basic utilities that need
-needed from the beginning, and was not intended to replace the BLFS
+have available from the beginning, and was not intended to replace the BLFS
 install system.
 
+  :::NOTICE:::
+  The following examples are for use with LFS and are not applicable to any
+of the CLFS-sysroot or CLFS-Embedded books. The directory examples_CLFS-E
+contains code extracted from Beyond CLFS-embedded. Any packages you chose to
+add should honour the DESTDIR=${CLFS} switch or equivalent.
+
+
   LAYOUT
-  A new directory has been added to JHALFS tree which contains the
+  A new directory has been added to JHALFS tree which will contain the
 configuration scripts and a few examples. A switch has been added to the
-configuration file which enables/disables the inclusion of custom scripts.
+configuration file which enables/disables the inclusion of personal scripts.
 
     custom
       /config          <-- where to put your scripts.
       /examples        <-- a few example scripts
+      /examples_CLFS-E <-- example scripts for CLFS-Embedded
       template         <-- ALL scripts MUST look like this
 
 
+
   NOTE::: You are responsible for including all dependencies and ensuring they
-          are built in the right order.
+          are built in the proper order.
 
   1. To add a package to the final JHALFS Makefile you must first create a file
-     in the custom/config directory. The directory custom/config may need
+     in the custom/config directory.
-     to be created first.
        **All config files MUST follow the naming convention, xxx-PKG, where xxx
        is the order number and PKG is the name of the package. The file naming
        format is important as it defines the build order. The example shown
@@ -121,36 +134,25 @@ configuration file which enables/disables the inclusion of custom scripts.
     and rename it.
 
   2. Populate the variables with the necessary values.
-       Variable function is self explanatory. PATCH variables must be
+       Variable function is self explanatory except for the inclusion of the
-       numbered, starting at PATCH1 (up to PATCH10). If the md5 checksum value
+       build cmds. If the package you want to include is found in the BLFS
-       is known, it can be added after the URL as in (quotes needed):
+       book then you only need to copy/paste the cmd strings between the xEOFx
-       PATCH1="http://patch-host/patch-path xxxxxxx..."
+       pairs, otherwise you will need to define the build cmds yourself.
-
-  3. Build commands
-       If the package you want to include is found in the BLFS
-       book then you only need to copy/paste the commands between the xEOFx
-       text, otherwise you will need to define the commands yourself.
      NOTE::: This script you just created is not usable directly but contains
              all the information necessary for jhalfs to create a build script
 	     and an entry in the jhalfs Makefile.
 
-  4. As mentioned previously the build order is dictated by the 3 digit number
+  3. As mentioned previously the build order is dictated by the 3 digit number
      in the file name. If a package has dependencies it must be numerically
      larger than the dependency files.
-       e.g. The package mc has glib as a dependency, so the build order is:
+       i.e. The package mc has glib as a dependency and build order is
            950-glib
 	   951-mc
 
-  5. A config file for BLFS-bootscripts is already created as 999-blfs_bootscripts.
+  4. A config file for BLFS-bootscripts is already created as 999-blfs_bootscripts.
      If a package requires a bootscript to be installed add the cmd to this
      file and NOT in the package script. The gpm script is included as an
-     example of patch file and the need for a blfs bootscript.
+     example of multiple patch files and the need for a blfs bootscript.
-
-
-  EXAMPLES
-
-    Other examples can be found in custom/examples. They are dated and
-    unmaintained, but can be useful for creating your own scripts.
 
 
 #--------- GLIB example -----------
@@ -173,6 +175,7 @@ for i in PATCH{1..10}; do
 done
   # Patches are named PATCH[1..10]
   # This information is used to download the patch only
+  # If you do not have the MD5SUM the download will proceed with a warning.
 PATCH1="http://www.linuxfromscratch.org/patches/blfs/svn/glib-1.2.10-gcc34-1.patch 0077a1cce5e8a2231ac5a9b08c6263ba"
 
 
@@ -197,12 +200,14 @@ xEOFx
 
 PKG="gpm"
 PKG_VERSION="1.20.1"
-PKG_FILE="gpm-1.20.1.tar.bz2"
+PKG_FILE="gmp-1.20.1.tar.bz2"
 URL="ftp://arcana.linux.it/pub/gpm/gpm-1.20.1.tar.bz2"
 MD5="2c63e827d755527950d9d13fe3d87692"
 for i in PATCH{1..10}; do
    unset $i
 done
+  # MD5SUM is not absolutely necessary but JHALFS whines and complains
+  # Add the MD5SUM if you can
 PATCH1=" http://www.linuxfromscratch.org/patches/blfs/svn/gpm-1.20.1-segfault-1.patch"
 PATCH2=" http://www.linuxfromscratch.org/patches/blfs/svn/gpm-1.20.1-silent-1.patch"
 
@@ -260,3 +265,4 @@ echo "JUST A USELESS TRACE"
 
 xEOFx
 ) > tmp
+

README.HLFS

@@ -0,0 +1,11 @@
+$Id$
+
+
+		::::NOTICE::::
+
+ Hardened Linux From Scratch is a highly volatile project. Extreme design
+ changes can occur and the build could be broken for extended periods of
+ time.
+
+ As of July 26.2007, the Glibc-based systems builds should work.
+ uClibc-based system still fail due book issues.

README.PACKAGE_MANAGEMENT

@@ -1,87 +0,0 @@
-TITLE : Package management in jhalfs
-BY    : Pierre Labastie (work in progress)
-
-1. INTRODUCTION:
-
-      There are several hints discussing package management for LFS, but
-  nothing under jhalfs. There used to be a patch for PACO that I cannot
-  find now. So there was a need for such a tool, and an infrastructure,
-  which allows using a package manager inside jhalfs, has been developped.
-  I hope it is flexible enough to support several package managers, at least
-  among those who use DESTDIR install and/or LD_PRELOAD during install.
-  It has been tested with dpkg from Debian, pacman from Arch Linux,
-  and porg. Sample configuration files are given for those three packages.
-  I am sorry to say I have (almost) no experience with rpm, so I cannot
-  tell whether it would fit.
-
-2. OVERVIEW OF THE SYSTEM:
-
-      For now, package management is only available for LFS. The `porg style'
-  (see below) package management has been ported to BLFS, but not the distro
-  style one (the book layout makes it rather difficult).
-
-      This tool comes in two flavours:
-  - for distros package managers (e.g dpkg or pacman), it basically performs
-    a "DESTDIR install" for all pages in chapter 8, 9 and 10 of the book. The
-    name of the DESTDIR directory is the same as the one of the executed
-    script. The path to this directory is available to the scriplets through
-    the PKG_DEST variable. The details of the DESTDIR part are given below.
-    After the package is installed in $PKG_DEST, a function "packInstall" is
-    called, which is supposed to create a binary package (e.g. make a .deb
-    file), store it to a repository and install it to the system.
-  - for porg style package manager, the install instructions are wrapped
-    between pairs of single quotes ('). This allows passing those instructions
-    to a function ("wrapInstall"), which may itself call porg or another
-    (e.g. fakeroot, not tested) instruction wrapper. Note that if the
-    instructions contain single quote charaters, they are changed to '\'',
-    which pass them literally. At the end of the installation, a function
-    "packInstall" is called, with a slighly different aim compared to the
-    DESTDIR one: it is used to make a tarball of the installed files (e.g.
-    using "porgball") and store them into some repository. But there is no
-    need to install them to the system, since this has already been done.
-
-      Note that with carefully crafted "packInstall" and "wrapInstall"
-  functions, a combination of the two methods could be used, for example for
-  DESTDIR installs using fakeroot. This is work in progress and not fully
-  implemented yet (well... Closer to a wish list actually).
-
-3. DETAILS:
-
-      The XSL stylesheet used for generating the scriptlets, automatically
-  adds DESTDIR install instructions when "package management" is selected.
-  Also all the paths beginning with " /" or ">/" (absolute paths) are prepended
-  with $PKG_DEST. This has the default that you might want to move
-  files to non existent directories. There is no simple way to automatically
-  create those directories, because you have sometimes to use the full path
-  (instructions of the form `cp file dir') and sometimes only the dirname
-  (instructions of the form `cp file1 file2'). So the XSL stylesheet
-  creates a reasonable subset of the FHS hierarchy into the destination
-  directory. Empty directories are then removed before packing the
-  binary package.
-
-      In order to use the package manager, it has to be installed at the end of
-  chapter 7 (temporary installation) and chapter 8 (final install).
-  Furthermore, the administrative files and directories have to be created
-  during the `Creating Directories' and `Creating Essential Files' stages.
-  For all this, the user has to supply a file in docbook XML format, with
-  the necessary instructions and enough information to download the tarball.
-  This file should reside in the `pkgmngt' directory and be named
-  `packageManager.xml'. A template named `packageManager.xml.template' is
-  provided in the `pkgmngt' subdirectory. There are also three XML files for
-  dpkg, pacman, and porg, respectively `packageManager.xml.dpkg',
-  `packageManager.xml.pacman',  and `packageManager.xml.porg', that you can
-  copy to `packageManager.xml' and modify to suit your needs.
-  They are not updated often, so the versions used can be rather old.
-
-      The last thing to do is to tell how to use the package manager. The user
-  has to provide two functions, "wrapInstall" and "packInstall", as described
-  above. Please note that nothing has been done to manage configuration files,
-  which are ususally treated specially by package managers: depending on
-  the book layout, it is sometimes possible to create those files afterwards,
-  and sometimes not, which means that you have to check them after each
-  upgrade. Both functions should be defined in a file named `packInstall.sh',
-  residing in the `pkgmngt' directory. A template is provided (actually a copy
-  of the file for dpkg), as well as three example scripts for dpkg, pacman,
-  and porg. Pacman Note: due to the way pacman checks the available space on
-  disk, the root directory in chroot must be a mount point, otherwise the
-  installation of packages fails.

TODO

@@ -1,6 +1,20 @@
             jhalfs TODO
           ---------------
-Remove RUN_ICA (it is redundant with COMPARE)
+
+
+MASTER SCRIPT
+-------------
+
+  - Nothing for now.
+
+
+xLFS MODULES
+------------
+
+  - To develop a new "restart" Makefile target code to can resume an stopped build
+  after a host reboot, if possible.
+
+
 BLFS MODULE (See BLFS/TODO)
 -----------
 
@@ -8,4 +22,4 @@ BLFS MODULE (See BLFS/TODO)
 OTHERS
 ------
 
-  - Bugs hunting and code clean-up.
+  - Bugs haunting and code clean-up.

XSL/blfs-tool.xsl

@@ -0,0 +1,406 @@
+<?xml version="1.0"?>
+
+<!-- $Id$ -->
+
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+    xmlns:exsl="http://exslt.org/common"
+    extension-element-prefixes="exsl"
+    version="1.0">
+
+
+    <!-- Create blfs-tool dependencies scripts -->
+  <xsl:template name="blfs-tool">
+      <!-- Fixed directory and ch_order values -->
+    <xsl:variable name="basedir">blfs-tool-deps/30_</xsl:variable>
+
+      <!-- libxml2 -->
+    <exsl:document href="{$basedir}01-libxml2" method="text">
+      <xsl:call-template name="header"/>
+      <xsl:text>
+PKG_PHASE=libxml2
+PACKAGE=libxml2
+VERSION=2.6.29
+TARBALL=libxml2-2.6.29.tar.gz
+DOWNLOAD=ftp://xmlsoft.org/libxml2/libxml2-2.6.29.tar.gz
+MD5SUM=8b99b6e8b08e838438d9e6b639d79ebd
+      </xsl:text>
+      <xsl:call-template name="disk_usage"/>
+      <xsl:call-template name="unpack"/>
+      <xsl:text>
+cd $PKGDIR
+./configure --prefix=/usr
+make
+make install
+      </xsl:text>
+      <xsl:call-template name="disk_usage"/>
+      <xsl:call-template name="clean_sources"/>
+      <xsl:call-template name="footer"/>
+    </exsl:document>
+
+      <!-- libxslt -->
+    <exsl:document href="{$basedir}02-libxslt" method="text">
+      <xsl:call-template name="header"/>
+      <xsl:text>
+PKG_PHASE=libxslt
+PACKAGE=libxslt
+VERSION=1.1.21
+TARBALL=libxslt-1.1.21.tar.gz
+DOWNLOAD=ftp://xmlsoft.org/libxslt/libxslt-1.1.21.tar.gz
+MD5SUM=59fe34e85692f71df2a38c2ee291b3ca
+      </xsl:text>
+      <xsl:call-template name="disk_usage"/>
+      <xsl:call-template name="unpack"/>
+      <xsl:text>
+cd $PKGDIR
+./configure --prefix=/usr
+make
+make install
+      </xsl:text>
+      <xsl:call-template name="disk_usage"/>
+      <xsl:call-template name="clean_sources"/>
+      <xsl:call-template name="footer"/>
+    </exsl:document>
+
+      <!-- tidy -->
+    <exsl:document href="{$basedir}03-tidy" method="text">
+      <xsl:call-template name="header"/>
+      <xsl:text>
+PKG_PHASE=html-tidy
+PACKAGE=tidy
+VERSION=cvs_20070326
+TARBALL=tidy-cvs_20070326.tar.bz2
+DOWNLOAD=http://anduin.linuxfromscratch.org/files/BLFS/sources/tidy-cvs_20070326
+MD5SUM=468bfaa5cf917a8ecbe7834c13a61376
+      </xsl:text>
+      <xsl:call-template name="disk_usage"/>
+      <xsl:call-template name="unpack"/>
+      <xsl:text>
+cd $PKGDIR
+./configure --prefix=/usr
+make
+make install
+make -C htmldoc install_apidocs
+      </xsl:text>
+      <xsl:call-template name="disk_usage"/>
+      <xsl:call-template name="clean_sources"/>
+      <xsl:call-template name="footer"/>
+    </exsl:document>
+
+      <!-- unzip -->
+    <exsl:document href="{$basedir}04-unzip" method="text">
+      <xsl:call-template name="header"/>
+      <xsl:text>
+PKG_PHASE=unzip
+PACKAGE=unzip
+VERSION=552
+TARBALL=unzip552.tar.gz
+DOWNLOAD=http://downloads.sourceforge.net/infozip/unzip552.tar.gz
+MD5SUM=9d23919999d6eac9217d1f41472034a9
+
+PATCH="http://www.linuxfromscratch.org/patches/blfs/svn/unzip-5.52-security_fix-1.patch 00ebf64fdda2ad54ddfc619f85f328bb"
+      </xsl:text>
+      <xsl:call-template name="disk_usage"/>
+      <xsl:call-template name="unpack"/>
+      <xsl:text>
+cd $PKGDIR
+patch -Np1 -i ../unzip-5.52-security_fix-1.patch
+make -f unix/Makefile LOCAL_UNZIP=-D_FILE_OFFSET_BITS=64 linux
+make prefix=/usr install
+      </xsl:text>
+      <xsl:call-template name="disk_usage"/>
+      <xsl:call-template name="clean_sources"/>
+      <xsl:call-template name="footer"/>
+    </exsl:document>
+
+      <!-- DocBook XML DTD -->
+    <exsl:document href="{$basedir}05-docbook-xml" method="text">
+      <xsl:call-template name="header"/>
+      <xsl:text>
+PKG_PHASE=DocBook
+PACKAGE=docbook-xml
+VERSION=4.5
+TARBALL=docbook-xml-4.5.zip
+DOWNLOAD=http://www.docbook.org/xml/4.5/docbook-xml-4.5.zip
+MD5SUM=03083e288e87a7e829e437358da7ef9e
+      </xsl:text>
+      <xsl:call-template name="disk_usage"/>
+      <xsl:text>
+cd /sources
+mkdir docbook-xml
+cd docbook-xml
+unzip ../docbook-xml-4.5.zip
+SECONDS=0
+install -v -d -m755 /usr/share/xml/docbook/xml-dtd-4.5
+install -v -d -m755 /etc/xml
+chown -R root:root .
+cp -v -af docbook.cat *.dtd ent/ *.mod \
+    /usr/share/xml/docbook/xml-dtd-4.5
+if [ ! -e /etc/xml/docbook ]; then
+    xmlcatalog --noout --create /etc/xml/docbook
+fi
+xmlcatalog --noout --add "public" \
+    "-//OASIS//DTD DocBook XML V4.5//EN" \
+    "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" \
+    /etc/xml/docbook
+xmlcatalog --noout --add "public" \
+    "-//OASIS//DTD DocBook XML CALS Table Model V4.5//EN" \
+    "file:///usr/share/xml/docbook/xml-dtd-4.5/calstblx.dtd" \
+    /etc/xml/docbook
+xmlcatalog --noout --add "public" \
+    "-//OASIS//DTD XML Exchange Table Model 19990315//EN" \
+    "file:///usr/share/xml/docbook/xml-dtd-4.5/soextblx.dtd" \
+    /etc/xml/docbook
+xmlcatalog --noout --add "public" \
+    "-//OASIS//ELEMENTS DocBook XML Information Pool V4.5//EN" \
+    "file:///usr/share/xml/docbook/xml-dtd-4.5/dbpoolx.mod" \
+    /etc/xml/docbook
+xmlcatalog --noout --add "public" \
+    "-//OASIS//ELEMENTS DocBook XML Document Hierarchy V4.5//EN" \
+    "file:///usr/share/xml/docbook/xml-dtd-4.5/dbhierx.mod" \
+    /etc/xml/docbook
+xmlcatalog --noout --add "public" \
+    "-//OASIS//ELEMENTS DocBook XML HTML Tables V4.5//EN" \
+    "file:///usr/share/xml/docbook/xml-dtd-4.5/htmltblx.mod" \
+    /etc/xml/docbook
+xmlcatalog --noout --add "public" \
+    "-//OASIS//ENTITIES DocBook XML Notations V4.5//EN" \
+    "file:///usr/share/xml/docbook/xml-dtd-4.5/dbnotnx.mod" \
+    /etc/xml/docbook
+xmlcatalog --noout --add "public" \
+    "-//OASIS//ENTITIES DocBook XML Character Entities V4.5//EN" \
+    "file:///usr/share/xml/docbook/xml-dtd-4.5/dbcentx.mod" \
+    /etc/xml/docbook
+xmlcatalog --noout --add "public" \
+    "-//OASIS//ENTITIES DocBook XML Additional General Entities V4.5//EN" \
+    "file:///usr/share/xml/docbook/xml-dtd-4.5/dbgenent.mod" \
+    /etc/xml/docbook
+xmlcatalog --noout --add "rewriteSystem" \
+    "http://www.oasis-open.org/docbook/xml/4.5" \
+    "file:///usr/share/xml/docbook/xml-dtd-4.5" \
+    /etc/xml/docbook
+xmlcatalog --noout --add "rewriteURI" \
+    "http://www.oasis-open.org/docbook/xml/4.5" \
+    "file:///usr/share/xml/docbook/xml-dtd-4.5" \
+    /etc/xml/docbook
+if [ ! -e /etc/xml/catalog ]; then
+    xmlcatalog --noout --create /etc/xml/catalog
+fi
+xmlcatalog --noout --add "delegatePublic" \
+    "-//OASIS//ENTITIES DocBook XML" \
+    "file:///etc/xml/docbook" \
+    /etc/xml/catalog
+xmlcatalog --noout --add "delegatePublic" \
+    "-//OASIS//DTD DocBook XML" \
+    "file:///etc/xml/docbook" \
+    /etc/xml/catalog
+xmlcatalog --noout --add "delegateSystem" \
+    "http://www.oasis-open.org/docbook/" \
+    "file:///etc/xml/docbook" \
+    /etc/xml/catalog
+xmlcatalog --noout --add "delegateURI" \
+    "http://www.oasis-open.org/docbook/" \
+    "file:///etc/xml/docbook" \
+    /etc/xml/catalog
+for DTDVERSION in 4.1.2 4.2 4.3 4.4
+do
+  xmlcatalog --noout --add "public" \
+    "-//OASIS//DTD DocBook XML V$DTDVERSION//EN" \
+    "http://www.oasis-open.org/docbook/xml/$DTDVERSION/docbookx.dtd" \
+    /etc/xml/docbook
+  xmlcatalog --noout --add "rewriteSystem" \
+    "http://www.oasis-open.org/docbook/xml/$DTDVERSION" \
+    "file:///usr/share/xml/docbook/xml-dtd-4.5" \
+    /etc/xml/docbook
+  xmlcatalog --noout --add "rewriteURI" \
+    "http://www.oasis-open.org/docbook/xml/$DTDVERSION" \
+    "file:///usr/share/xml/docbook/xml-dtd-4.5" \
+    /etc/xml/docbook
+  xmlcatalog --noout --add "delegateSystem" \
+    "http://www.oasis-open.org/docbook/xml/$DTDVERSION/" \
+    "file:///etc/xml/docbook" \
+    /etc/xml/catalog
+  xmlcatalog --noout --add "delegateURI" \
+    "http://www.oasis-open.org/docbook/xml/$DTDVERSION/" \
+    "file:///etc/xml/docbook" \
+    /etc/xml/catalog
+done
+      </xsl:text>
+      <xsl:call-template name="disk_usage"/>
+      <xsl:text>
+SECS=$SECONDS
+cd /sources
+rm -rf docbook-xml
+SECONDS=$SECS
+      </xsl:text>
+      <xsl:call-template name="footer"/>
+    </exsl:document>
+
+      <!-- DocBook XSL (empty and commented-out, it's not required for now) -->
+    <!--<exsl:document href="{$basedir}06-docbook-xsl" method="text">
+      <xsl:call-template name="header"/>
+      <xsl:text>
+PKG_PHASE=docbook-xsl
+PACKAGE=docbook-xsl
+VERSION=
+TARBALL=
+DOWNLOAD=
+MD5SUM=
+      </xsl:text>
+      <xsl:call-template name="disk_usage"/>
+      <xsl:call-template name="unpack"/>
+      <xsl:text>
+cd $PKGDIR
+      </xsl:text>
+      <xsl:call-template name="disk_usage"/>
+      <xsl:call-template name="clean_sources"/>
+      <xsl:call-template name="footer"/>
+    </exsl:document>-->
+
+      <!-- gpm -->
+    <exsl:document href="{$basedir}07-gpm" method="text">
+      <xsl:call-template name="header"/>
+      <xsl:text>
+PKG_PHASE=gpm
+PACKAGE=gpm
+VERSION=1.20.1
+TARBALL=gpm-1.20.1.tar.bz2
+DOWNLOAD=ftp://ftp.linux.ee/pub/gentoo/distfiles/distfiles/gpm-1.20.1.tar.bz2
+MD5SUM=2c63e827d755527950d9d13fe3d87692
+
+PATCH="http://www.linuxfromscratch.org/patches/blfs/svn/gpm-1.20.1-segfault-1.patch 8c88f92990ba7613014fcd1db14ca7ac"
+PATCH="http://www.linuxfromscratch.org/patches/blfs/svn/gpm-1.20.1-silent-1.patch bf6cbefe20c6f15b587f19ebc1c8a37a"
+      </xsl:text>
+      <xsl:call-template name="disk_usage"/>
+      <xsl:call-template name="unpack"/>
+      <xsl:text>
+cd $PKGDIR
+patch -Np1 -i ../gpm-1.20.1-segfault-1.patch
+patch -Np1 -i ../gpm-1.20.1-silent-1.patch
+./configure --prefix=/usr --sysconfdir=/etc
+LDFLAGS="$LDFLAGS -lm" make
+make install
+cp -v conf/gpm-root.conf /etc
+ldconfig
+      </xsl:text>
+      <xsl:call-template name="disk_usage"/>
+      <xsl:call-template name="clean_sources"/>
+      <xsl:call-template name="footer"/>
+    </exsl:document>
+
+      <!-- lynx -->
+    <exsl:document href="{$basedir}08-lynx" method="text">
+      <xsl:call-template name="header"/>
+      <xsl:text>
+PKG_PHASE=lynx
+PACKAGE=lynx
+VERSION=2.8.6
+TARBALL=lynx2.8.6.tar.bz2
+DOWNLOAD=http://lynx.isc.org/release/lynx2.8.6.tar.bz2
+MD5SUM=dc80497b7dda6a28fd80404684d27548
+      </xsl:text>
+      <xsl:call-template name="disk_usage"/>
+      <xsl:call-template name="unpack"/>
+      <xsl:text>
+cd $PKGDIR
+./configure --prefix=/usr \
+            --sysconfdir=/etc/lynx \
+            --datadir=/usr/share/doc/lynx-2.8.6 \
+            --with-zlib \
+            --with-bzlib \
+            --with-screen=ncursesw \
+            --enable-locale-charset
+make
+make install-full
+chgrp -v -R root /usr/share/doc/lynx-2.8.6/lynx_doc
+      </xsl:text>
+      <xsl:call-template name="disk_usage"/>
+      <xsl:call-template name="clean_sources"/>
+      <xsl:call-template name="footer"/>
+    </exsl:document>
+
+      <!-- sudo -->
+    <exsl:document href="{$basedir}09-sudo" method="text">
+      <xsl:call-template name="header"/>
+      <xsl:text>
+PKG_PHASE=sudo
+PACKAGE=sudo
+VERSION=1.6.8p12
+TARBALL=sudo-1.6.8p12.tar.gz
+DOWNLOAD=http://anduin.linuxfromscratch.org/sources/BLFS/svn/s/sudo-1.6.8p12.tar.gz
+MD5SUM=b29893c06192df6230dd5f340f3badf5
+
+PATCH="http://www.linuxfromscratch.org/patches/blfs/svn/sudo-1.6.8p12-envvar_fix-1.patch 454925aedfe054dff8fe0d03b209f986"
+      </xsl:text>
+      <xsl:call-template name="disk_usage"/>
+      <xsl:call-template name="unpack"/>
+      <xsl:text>
+cd $PKGDIR
+patch -Np1 -i ../sudo-1.6.8p12-envvar_fix-1.patch
+./configure --prefix=/usr --libexecdir=/usr/lib \
+    --enable-noargs-shell --with-ignore-dot --with-all-insults \
+    --enable-shell-sets-home
+make
+make install
+      </xsl:text>
+      <xsl:call-template name="disk_usage"/>
+      <xsl:call-template name="clean_sources"/>
+      <xsl:call-template name="footer"/>
+    </exsl:document>
+
+      <!-- wget -->
+    <exsl:document href="{$basedir}10-wget" method="text">
+      <xsl:call-template name="header"/>
+      <xsl:text>
+PKG_PHASE=wget
+PACKAGE=wget
+VERSION=1.10.2
+TARBALL=wget-1.10.2.tar.gz
+DOWNLOAD=ftp://ftp.gnu.org/gnu/wget/wget-1.10.2.tar.gz
+MD5SUM=795fefbb7099f93e2d346b026785c4b8
+      </xsl:text>
+      <xsl:call-template name="disk_usage"/>
+      <xsl:call-template name="unpack"/>
+      <xsl:text>
+cd $PKGDIR
+./configure --prefix=/usr --sysconfdir=/etc
+make
+make install
+      </xsl:text>
+      <xsl:call-template name="disk_usage"/>
+      <xsl:call-template name="clean_sources"/>
+      <xsl:call-template name="footer"/>
+    </exsl:document>
+
+      <!-- subversion -->
+    <exsl:document href="{$basedir}11-subversion" method="text">
+      <xsl:call-template name="header"/>
+      <xsl:text>
+PKG_PHASE=subversion
+PACKAGE=subversion
+VERSION=1.3.1
+TARBALL=subversion-1.3.1.tar.bz2
+DOWNLOAD=http://subversion.tigris.org/tarballs/subversion-1.3.1.tar.bz2
+MD5SUM=07b95963968ae345541ca99d0e7bf082
+      </xsl:text>
+      <xsl:call-template name="disk_usage"/>
+      <xsl:call-template name="unpack"/>
+      <xsl:text>
+cd $PKGDIR
+./configure --prefix=/usr \
+            --without-berkeley-db \
+            --with-installbuilddir=/usr/lib/apr-0
+make
+make install
+rm doc/{Makefile,doxygen.conf}
+find doc -type d -exec chmod 755 {} \;
+find doc -type f -exec chmod 644 {} \;
+install -v -m755 -d /usr/share/doc/subversion-1.3.1
+cp -v -R doc/* /usr/share/doc/subversion-1.3.1
+      </xsl:text>
+      <xsl:call-template name="disk_usage"/>
+      <xsl:call-template name="clean_sources"/>
+      <xsl:call-template name="footer"/>
+    </exsl:document>
+  </xsl:template>
+
+</xsl:stylesheet>

XSL/custom-tools.xsl

@@ -0,0 +1,47 @@
+<?xml version="1.0"?>
+
+<!-- $Id$ -->
+
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+    xmlns:exsl="http://exslt.org/common"
+    extension-element-prefixes="exsl"
+    version="1.0">
+
+
+    <!-- Create a custom tools directory containing scripts
+         to be run after the base system has been built -->
+    <!-- See blfs-tool.xsl for exsl:document examples -->
+  <xsl:template name="custom-tools">
+      <!-- Fixed directory and ch_order values -->
+    <xsl:variable name="basedir">custom-tools/20_</xsl:variable>
+      <!-- Add an exsl:document block for each script to be created.
+           This one is only a dummy example. You must replace "01" by
+           the proper build order and "dummy" by the script name -->
+    <exsl:document href="{$basedir}01-dummy" method="text">
+      <xsl:call-template name="header"/>
+      <xsl:text>
+PKG_PHASE=dummy
+PACKAGE=dummy
+VERSION=0.0.0
+TARBALL=dummy-0.0.0.tar.bz2
+DOWNLOAD=http://www.example.com/sources/dummy-0.0.0.tar.bz2
+MD5SUM=b0c2f10c23b1d529725c8f9c693858cf
+
+PATCH="http://www.example.com/sources/dummy-0.0.0.fix1.patch 65c913efccffda4b9dc66e9002e8516e"
+PATCH="http://www.example.com/sources/dummy-0.0.0.fix2.patch fb411aae8d1eb8a733bb1def9266f2ba"
+      </xsl:text>
+      <xsl:call-template name="disk_usage"/>
+      <xsl:call-template name="unpack"/>
+      <xsl:text>
+cd $PKGDIR
+./configure --prefix=/usr
+make
+make install
+      </xsl:text>
+      <xsl:call-template name="disk_usage"/>
+      <xsl:call-template name="clean_sources"/>
+      <xsl:call-template name="footer"/>
+    </exsl:document>
+  </xsl:template>
+
+</xsl:stylesheet>

XSL/optimize.xsl

@@ -0,0 +1,485 @@
+<?xml version="1.0"?>
+
+<!-- $Id$ -->
+
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+    version="1.0">
+
+<!-- ####################### PARAMETERS ################################### -->
+
+          <!-- ###### MAKEFLAGS ###### -->
+
+    <!-- Should MAKEFLAGS be set? y = yes, n = no -->
+  <xsl:param name="set_makeflags">y</xsl:param>
+
+
+    <!-- Jobs control level. Left it empty for no jobs control -->
+  <xsl:param name="jobs">-j3</xsl:param>
+
+
+    <!-- Jobs control black-listed packages. One in each line.
+         NOTE: This and other similar parameters uses the PKG_PHASE value -->
+  <xsl:param name="no_jobs">
+    keep_this_line
+    autoconf
+    dejagnu
+    gettext
+    groff
+    man-db
+    keep_this_line
+  </xsl:param>
+
+
+    <!-- Additional make flags. -->
+  <xsl:param name="makeflags"></xsl:param>
+
+
+    <!-- Additional make flags black-listed packages. One in each line. -->
+  <xsl:param name="no_mkflags">
+    keep_this_line
+    keep_this_line
+  </xsl:param>
+
+
+          <!-- ############################ -->
+
+          <!-- ###### COMPILER FLAGS ###### -->
+
+    <!-- Should compiler envars be set? y = yes, n = no -->
+  <xsl:param name="set_buildflags">y</xsl:param>
+
+
+    <!-- Compiler optimizations black-listed packages. One in each line. -->
+  <xsl:param name="no_buildflags">
+    keep_this_line
+    binutils
+    binutils-pass1
+    binutils-pass2
+    gcc
+    gcc-pass1
+    gcc-pass2
+    glibc
+    grub
+    keep_this_line
+  </xsl:param>
+
+
+  <!-- Default envars setting. Left empty to not set a variable. -->
+
+    <!-- Default CFLAGS -->
+  <xsl:param name="cflags">-O3 -pipe</xsl:param>
+
+
+    <!-- Default CXXFLAGS -->
+  <xsl:param name="cxxflags">$CFLAGS</xsl:param>
+
+
+    <!-- Default OTHER_CFLAGS -->
+  <xsl:param name="other_cflags">$CFLAGS</xsl:param>
+
+
+    <!-- Default OTHER_CXXFLAGS -->
+  <xsl:param name="other_cxxflags">$CXXFLAGS</xsl:param>
+
+
+    <!-- Default LDFLAGS -->
+  <xsl:param name="ldflags"></xsl:param>
+
+
+    <!-- Default OTHER_LDFLAGS -->
+  <xsl:param name="other_ldflags"></xsl:param>
+
+                         <!-- -->
+
+  <!-- By-package additional settings. A pair "package value" on each line.
+       The values set here will be added to the ones set above -->
+
+    <!-- Extra CFLAGS -->
+  <xsl:param name="extra_cflags">
+    zlib -fPIC
+  </xsl:param>
+
+
+    <!-- Extra CXXFLAGS -->
+  <xsl:param name="extra_cxxflags">
+  </xsl:param>
+
+
+    <!-- Extra OTHER_CFLAGS -->
+  <xsl:param name="extra_other_cflags">
+  </xsl:param>
+
+
+    <!-- Extra OTHER_CXXFLAGS -->
+  <xsl:param name="extra_other_cxxflags">
+  </xsl:param>
+
+
+    <!-- Extra LDFLAGS -->
+  <xsl:param name="extra_ldflags">
+  </xsl:param>
+
+
+    <!-- Extra OTHER_LDFLAGS -->
+  <xsl:param name="extra_other_ldflags">
+  </xsl:param>
+
+                         <!-- -->
+
+  <!-- By-package settings. A pair "package value" on each line.
+       The values set here will override the ones set above -->
+
+    <!-- Extra CFLAGS -->
+  <xsl:param name="override_cflags">
+  </xsl:param>
+
+
+    <!-- Extra CXXFLAGS -->
+  <xsl:param name="override_cxxflags">
+  </xsl:param>
+
+
+    <!-- Extra OTHER_CFLAGS -->
+  <xsl:param name="override_other_cflags">
+  </xsl:param>
+
+
+    <!-- Extra OTHER_CXXFLAGS -->
+  <xsl:param name="override_other_cxxflags">
+  </xsl:param>
+
+
+    <!-- Extra LDFLAGS -->
+  <xsl:param name="override_ldflags">
+  </xsl:param>
+
+
+    <!-- Extra OTHER_LDFLAGS -->
+  <xsl:param name="override_other_ldflags">
+  </xsl:param>
+
+
+<!-- ######################################################################## -->
+
+<!-- ########################### NAMED TEMPLATES ########################### -->
+
+     <!-- Master optimizations template -->
+  <xsl:template name="optimize">
+    <xsl:param name="package" select="foo"/>
+    <xsl:text>&#xA;&#xA;</xsl:text>
+    <xsl:if test="$set_makeflags = 'y'">
+      <xsl:call-template name="makeflags">
+        <xsl:with-param name="package" select="$package"/>
+      </xsl:call-template>
+    </xsl:if>
+    <xsl:if test="$set_buildflags = 'y' and
+            not(contains(normalize-space($no_buildflags),concat(' ',$package,' ')))">
+      <xsl:call-template name="buildflags">
+        <xsl:with-param name="package" select="$package"/>
+      </xsl:call-template>
+    </xsl:if>
+  </xsl:template>
+
+
+    <!-- MAKEFLAGS template -->
+  <xsl:template name="makeflags">
+    <xsl:param name="package" select="foo"/>
+      <!-- Test if jobs control must be set -->
+    <xsl:variable name="set_jobs">
+      <xsl:if test="$jobs != '' and
+              not(contains(normalize-space($no_jobs),concat(' ',$package,' ')))">1</xsl:if>
+    </xsl:variable>
+      <!-- Test if additional make flags must be set -->
+    <xsl:variable name="add_mkflags">
+      <xsl:if test="$makeflags != '' and
+              not(contains(normalize-space($no_mkflags),concat(' ',$package,' ')))">1</xsl:if>
+    </xsl:variable>
+      <!-- Write the envar -->
+    <xsl:if test="$set_jobs = '1' or $add_mkflags = '1'">
+      <xsl:text>MAKEFLAGS="</xsl:text>
+        <!-- Write jobs control value -->
+      <xsl:if test="$set_jobs = '1'">
+        <xsl:value-of select="$jobs"/>
+      </xsl:if>
+        <!-- If both values will be written, be sure that are space separated -->
+      <xsl:if test="$set_jobs = '1' and $add_mkflags = '1'">
+        <xsl:text> </xsl:text>
+      </xsl:if>
+        <!-- Write additional make flags value -->
+      <xsl:if test="$add_mkflags = '1'">
+        <xsl:value-of select="$makeflags"/>
+      </xsl:if>
+      <xsl:text>"&#xA;</xsl:text>
+    </xsl:if>
+  </xsl:template>
+
+
+    <!-- Master compiler flags template -->
+  <xsl:template name="buildflags">
+    <xsl:param name="package" select="foo"/>
+    <xsl:if test="$cflags != ''">
+      <xsl:call-template name="cflags">
+        <xsl:with-param name="package" select="$package"/>
+      </xsl:call-template>
+    </xsl:if>
+    <xsl:if test="$cxxflags != ''">
+      <xsl:call-template name="cxxflags">
+        <xsl:with-param name="package" select="$package"/>
+      </xsl:call-template>
+    </xsl:if>
+    <xsl:if test="$other_cflags != ''">
+      <xsl:call-template name="other_cflags">
+        <xsl:with-param name="package" select="$package"/>
+      </xsl:call-template>
+    </xsl:if>
+    <xsl:if test="$other_cxxflags != ''">
+      <xsl:call-template name="other_cxxflags">
+        <xsl:with-param name="package" select="$package"/>
+      </xsl:call-template>
+    </xsl:if>
+    <xsl:if test="$ldflags != ''">
+      <xsl:call-template name="ldflags">
+        <xsl:with-param name="package" select="$package"/>
+      </xsl:call-template>
+    </xsl:if>
+    <xsl:if test="$other_ldflags != ''">
+      <xsl:call-template name="other_ldflags">
+        <xsl:with-param name="package" select="$package"/>
+      </xsl:call-template>
+    </xsl:if>
+  </xsl:template>
+
+
+    <!-- CFLAGS template -->
+  <xsl:template name="cflags">
+    <xsl:param name="package" select="foo"/>
+      <!-- Find the override value, if any -->
+    <xsl:variable name="override">
+      <xsl:call-template name="lookup.key">
+        <xsl:with-param name="key" select="$package"/>
+        <xsl:with-param name="table" select="normalize-space($override_cflags)"/>
+      </xsl:call-template>
+    </xsl:variable>
+      <!-- Find the extra settings, if any -->
+    <xsl:variable name="extra">
+      <xsl:call-template name="lookup.key">
+        <xsl:with-param name="key" select="$package"/>
+        <xsl:with-param name="table" select="normalize-space($extra_cflags)"/>
+      </xsl:call-template>
+    </xsl:variable>
+      <!-- Writte the envar -->
+    <xsl:text>CFLAGS="</xsl:text>
+    <xsl:choose>
+      <xsl:when test="$override != ''">
+        <xsl:value-of select="$override"/>
+      </xsl:when>
+      <xsl:otherwise>
+        <xsl:value-of select="$cflags"/>
+        <xsl:if test="$extra != ''">
+          <xsl:value-of select="concat(' ',$extra)"/>
+        </xsl:if>
+      </xsl:otherwise>
+    </xsl:choose>
+    <xsl:text>"&#xA;</xsl:text>
+  </xsl:template>
+
+
+    <!-- CXXFLAGS template -->
+  <xsl:template name="cxxflags">
+    <xsl:param name="package" select="foo"/>
+      <!-- Find the override value, if any -->
+    <xsl:variable name="override">
+      <xsl:call-template name="lookup.key">
+        <xsl:with-param name="key" select="$package"/>
+        <xsl:with-param name="table" select="normalize-space($override_cxxflags)"/>
+      </xsl:call-template>
+    </xsl:variable>
+      <!-- Find the extra settings, if any -->
+    <xsl:variable name="extra">
+      <xsl:call-template name="lookup.key">
+        <xsl:with-param name="key" select="$package"/>
+        <xsl:with-param name="table" select="normalize-space($extra_cxxflags)"/>
+      </xsl:call-template>
+    </xsl:variable>
+      <!-- Writte the envar -->
+    <xsl:text>CXXFLAGS="</xsl:text>
+    <xsl:choose>
+      <xsl:when test="$override != ''">
+        <xsl:value-of select="$override"/>
+      </xsl:when>
+      <xsl:otherwise>
+        <xsl:value-of select="$cxxflags"/>
+        <xsl:if test="$extra != ''">
+          <xsl:value-of select="concat(' ',$extra)"/>
+        </xsl:if>
+      </xsl:otherwise>
+    </xsl:choose>
+    <xsl:text>"&#xA;</xsl:text>
+  </xsl:template>
+
+
+    <!-- OTHER_CFLAGS template -->
+  <xsl:template name="other_cflags">
+    <xsl:param name="package" select="foo"/>
+      <!-- Find the override value, if any -->
+    <xsl:variable name="override">
+      <xsl:call-template name="lookup.key">
+        <xsl:with-param name="key" select="$package"/>
+        <xsl:with-param name="table" select="normalize-space($override_other_cflags)"/>
+      </xsl:call-template>
+    </xsl:variable>
+      <!-- Find the extra settings, if any -->
+    <xsl:variable name="extra">
+      <xsl:call-template name="lookup.key">
+        <xsl:with-param name="key" select="$package"/>
+        <xsl:with-param name="table" select="normalize-space($extra_other_cflags)"/>
+      </xsl:call-template>
+    </xsl:variable>
+      <!-- Writte the envar -->
+    <xsl:text>OTHER_CFLAGS="</xsl:text>
+    <xsl:choose>
+      <xsl:when test="$override != ''">
+        <xsl:value-of select="$override"/>
+      </xsl:when>
+      <xsl:otherwise>
+        <xsl:value-of select="$other_cflags"/>
+        <xsl:if test="$extra != ''">
+          <xsl:value-of select="concat(' ',$extra)"/>
+        </xsl:if>
+      </xsl:otherwise>
+    </xsl:choose>
+    <xsl:text>"&#xA;</xsl:text>
+  </xsl:template>
+
+
+    <!-- OTHER_CXXFLAGS template -->
+  <xsl:template name="other_cxxflags">
+    <xsl:param name="package" select="foo"/>
+      <!-- Find the override value, if any -->
+    <xsl:variable name="override">
+      <xsl:call-template name="lookup.key">
+        <xsl:with-param name="key" select="$package"/>
+        <xsl:with-param name="table" select="normalize-space($override_other_cxxflags)"/>
+      </xsl:call-template>
+    </xsl:variable>
+      <!-- Find the extra settings, if any -->
+    <xsl:variable name="extra">
+      <xsl:call-template name="lookup.key">
+        <xsl:with-param name="key" select="$package"/>
+        <xsl:with-param name="table" select="normalize-space($extra_other_cxxflags)"/>
+      </xsl:call-template>
+    </xsl:variable>
+      <!-- Writte the envar -->
+    <xsl:text>OTHER_CXXFLAGS="</xsl:text>
+    <xsl:choose>
+      <xsl:when test="$override != ''">
+        <xsl:value-of select="$override"/>
+      </xsl:when>
+      <xsl:otherwise>
+        <xsl:value-of select="$other_cxxflags"/>
+        <xsl:if test="$extra != ''">
+          <xsl:value-of select="concat(' ',$extra)"/>
+        </xsl:if>
+      </xsl:otherwise>
+    </xsl:choose>
+    <xsl:text>"&#xA;</xsl:text>
+  </xsl:template>
+
+
+    <!-- LDFLAGS template -->
+  <xsl:template name="ldflags">
+    <xsl:param name="package" select="foo"/>
+      <!-- Find the override value, if any -->
+    <xsl:variable name="override">
+      <xsl:call-template name="lookup.key">
+        <xsl:with-param name="key" select="$package"/>
+        <xsl:with-param name="table" select="normalize-space($override_ldflags)"/>
+      </xsl:call-template>
+    </xsl:variable>
+      <!-- Find the extra settings, if any -->
+    <xsl:variable name="extra">
+      <xsl:call-template name="lookup.key">
+        <xsl:with-param name="key" select="$package"/>
+        <xsl:with-param name="table" select="normalize-space($extra_ldflags)"/>
+      </xsl:call-template>
+    </xsl:variable>
+      <!-- Writte the envar -->
+    <xsl:text>LDFLAGS="</xsl:text>
+    <xsl:choose>
+      <xsl:when test="$override != ''">
+        <xsl:value-of select="$override"/>
+      </xsl:when>
+      <xsl:otherwise>
+        <xsl:value-of select="$ldflags"/>
+        <xsl:if test="$extra != ''">
+          <xsl:value-of select="concat(' ',$extra)"/>
+        </xsl:if>
+      </xsl:otherwise>
+    </xsl:choose>
+    <xsl:text>"&#xA;</xsl:text>
+  </xsl:template>
+
+
+    <!-- OTHER_LDFLAGS template -->
+  <xsl:template name="other_ldflags">
+    <xsl:param name="package" select="foo"/>
+      <!-- Find the override value, if any -->
+    <xsl:variable name="override">
+      <xsl:call-template name="lookup.key">
+        <xsl:with-param name="key" select="$package"/>
+        <xsl:with-param name="table" select="normalize-space($override_other_ldflags)"/>
+      </xsl:call-template>
+    </xsl:variable>
+      <!-- Find the extra settings, if any -->
+    <xsl:variable name="extra">
+      <xsl:call-template name="lookup.key">
+        <xsl:with-param name="key" select="$package"/>
+        <xsl:with-param name="table" select="normalize-space($extra_other_ldflags)"/>
+      </xsl:call-template>
+    </xsl:variable>
+      <!-- Writte the envar -->
+    <xsl:text>OTHER_LDFLAGS="</xsl:text>
+    <xsl:choose>
+      <xsl:when test="$override != ''">
+        <xsl:value-of select="$override"/>
+      </xsl:when>
+      <xsl:otherwise>
+        <xsl:value-of select="$other_ldflags"/>
+        <xsl:if test="$extra != ''">
+          <xsl:value-of select="concat(' ',$extra)"/>
+        </xsl:if>
+      </xsl:otherwise>
+    </xsl:choose>
+    <xsl:text>"&#xA;</xsl:text>
+  </xsl:template>
+
+
+    <!-- Parses a table-like param finding a pair key-value.
+         Copied from DocBook-XSL -->
+  <xsl:template name="lookup.key">
+    <xsl:param name="key" select="''"/>
+    <xsl:param name="table" select="''"/>
+    <xsl:if test="contains($table, ' ')">
+      <xsl:choose>
+        <xsl:when test="substring-before($table, ' ') = $key">
+          <xsl:variable name="rest" select="substring-after($table, ' ')"/>
+          <xsl:choose>
+            <xsl:when test="contains($rest, ' ')">
+              <xsl:value-of select="substring-before($rest, ' ')"/>
+            </xsl:when>
+            <xsl:otherwise>
+              <xsl:value-of select="$rest"/>
+            </xsl:otherwise>
+          </xsl:choose>
+        </xsl:when>
+        <xsl:otherwise>
+          <xsl:call-template name="lookup.key">
+            <xsl:with-param name="key" select="$key"/>
+            <xsl:with-param name="table" select="substring-after(substring-after($table,' '), ' ')"/>
+          </xsl:call-template>
+        </xsl:otherwise>
+      </xsl:choose>
+    </xsl:if>
+  </xsl:template>
+
+</xsl:stylesheet>

XSL/urls.xsl

@@ -0,0 +1,130 @@
+<?xml version='1.0' encoding='ISO-8859-1'?>
+
+<!-- $Id$ -->
+
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+    version="1.0">
+
+  <xsl:output method="text"/>
+
+  <!-- The FTP server used as fallback -->
+  <xsl:param name="server">ftp://ftp.osuosl.org</xsl:param>
+
+  <!-- The book family (lfs or clfs). Needed to use the proper FTP path. -->
+  <xsl:param name="family">lfs</xsl:param>
+
+  <!-- The libc model used for HLFS -->
+  <xsl:param name="model" select="glibc"/>
+
+  <!-- The kernel series used for HLFS -->
+  <xsl:param name="kernel" select="2.6"/>
+
+  <xsl:template match="/">
+    <xsl:apply-templates select="//ulink"/>
+  </xsl:template>
+
+  <xsl:template match="ulink">
+      <!-- If some package don't have the predefined strings in their
+      name, the next test must be fixed to match it also. Skip possible
+      duplicated URLs due that may be splitted for PDF output -->
+    <xsl:if test="(ancestor::varlistentry[@condition=$model]
+                  or not(ancestor::varlistentry[@condition])) and
+                  (ancestor::varlistentry[@vendor=$kernel]
+                  or not(ancestor::varlistentry[@vendor])) and
+                  (contains(@url, '.bz2') or contains(@url, '.tar.gz') or
+                  contains(@url, '.tgz') or contains(@url, '.patch')) and
+                  not(ancestor-or-self::*/@condition = 'pdf')">
+      <!-- Extract the package name -->
+      <xsl:variable name="package">
+        <xsl:call-template name="package.name">
+          <xsl:with-param name="url" select="@url"/>
+        </xsl:call-template>
+      </xsl:variable>
+      <!-- Extract the directory for that package -->
+      <xsl:variable name="cut"
+                    select="translate(substring-after($package, '-'),
+                    '0123456789', '0000000000')"/>
+      <xsl:variable name="package2">
+        <xsl:value-of select="substring-before($package, '-')"/>
+        <xsl:text>-</xsl:text>
+        <xsl:value-of select="$cut"/>
+      </xsl:variable>
+      <xsl:variable name="dirname" select="substring-before($package2, '-0')"/>
+      <!-- Write the upstream URLs, fixing the redirected ones -->
+      <xsl:choose>
+        <xsl:when test="contains(@url,'?')">
+          <xsl:value-of select="substring-before(@url,'?')"/>
+        </xsl:when>
+        <xsl:otherwise>
+          <xsl:value-of select="@url"/>
+        </xsl:otherwise>
+      </xsl:choose>
+      <xsl:text> </xsl:text>
+      <!-- Write FTP mirror URLs -->
+      <xsl:value-of select="$server"/>
+      <xsl:text>/pub/</xsl:text>
+      <xsl:value-of select="$family"/>
+      <xsl:text>/conglomeration/</xsl:text>
+      <xsl:choose>
+        <!-- Fix some directories. Test against $dirname to be sure that we
+        are matching the start of a package name, not a string in a patch name
+        But some packages requires test against $package. -->
+        <xsl:when test="contains($dirname, 'bash')">
+          <xsl:text>bash/</xsl:text>
+        </xsl:when>
+        <xsl:when test="contains($package, 'dvhtool')">
+          <xsl:text>dvhtool/</xsl:text>
+        </xsl:when>
+        <xsl:when test="contains($dirname, 'gcc')">
+          <xsl:text>gcc/</xsl:text>
+        </xsl:when>
+        <xsl:when test="contains($dirname, 'glibc')">
+          <xsl:text>glibc/</xsl:text>
+        </xsl:when>
+        <xsl:when test="contains($package, 'powerpc-utils')">
+          <xsl:text>powerpc-utils/</xsl:text>
+        </xsl:when>
+        <xsl:when test="contains($package, 'tcl')">
+          <xsl:text>tcl/</xsl:text>
+        </xsl:when>
+        <xsl:when test="contains($package, 'uClibc')">
+          <xsl:text>uClibc/</xsl:text>
+        </xsl:when>
+        <xsl:when test="contains($dirname, 'udev')">
+          <xsl:text>udev/</xsl:text>
+        </xsl:when>
+        <xsl:otherwise>
+          <xsl:value-of select="$dirname"/>
+          <xsl:text>/</xsl:text>
+        </xsl:otherwise>
+      </xsl:choose>
+      <xsl:value-of select="$package"/>
+      <!-- Write MD5SUM value -->
+      <xsl:text> </xsl:text>
+      <xsl:value-of select="../..//para/literal"/>
+      <xsl:text>&#x0a;</xsl:text>
+    </xsl:if>
+  </xsl:template>
+
+  <xsl:template name="package.name">
+    <xsl:param name="url"/>
+    <xsl:choose>
+      <xsl:when test="contains($url, '/')">
+        <xsl:call-template name="package.name">
+          <xsl:with-param name="url" select="substring-after($url, '/')"/>
+        </xsl:call-template>
+      </xsl:when>
+      <xsl:otherwise>
+        <xsl:choose>
+          <xsl:when test="contains($url, '?')">
+            <xsl:value-of select="substring-before($url, '?')"/>
+          </xsl:when>
+          <xsl:otherwise>
+            <xsl:value-of select="$url"/>
+          </xsl:otherwise>
+        </xsl:choose>
+      </xsl:otherwise>
+    </xsl:choose>
+  </xsl:template>
+
+</xsl:stylesheet>

XSL/user.xsl

@@ -0,0 +1,247 @@
+<?xml version="1.0"?>
+
+<!-- $Id$ -->
+
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+    xmlns:exsl="http://exslt.org/common"
+    extension-element-prefixes="exsl"
+    version="1.0">
+
+<!-- Base system build customization templates.
+     This is a collection of free non-book dependant templates that can be
+     used to customize the build scripts content, how each of the base system
+     packages is build, or to insert scripts into the system build flow.
+     Don't edit the templates directly here, this file is only for reference
+     and your changes will be lost if updating the jhalfs code.
+     Select what of them you need and place it into you customization layout.-->
+
+
+<!-- ########## TEMPLATES TO INSERT CODE AND TO ADD EXTRA SCRIPTS ########## -->
+
+    <!-- Hock to insert extra code after the logs date timestamp dump and
+         before the envars settings -->
+  <xsl:template name="user_header">
+    <xsl:text>&#xA;</xsl:text>
+  </xsl:template>
+
+
+    <!-- Hock to add envars or extra commands after unpacking the tarball
+         but before cd into the sources dir -->
+  <xsl:template name="user_pre_commands">
+    <xsl:text>&#xA;</xsl:text>
+  </xsl:template>
+
+
+    <!-- Hock for commands additions after the book commands but before
+         removing sources dir -->
+  <xsl:template name="user_footer">
+    <xsl:text>&#xA;</xsl:text>
+  </xsl:template>
+
+
+    <!-- Hock for inserting scripts before a selected one -->
+  <xsl:template name="insert_script_before">
+      <!-- Inherited values -->
+    <xsl:param name="reference" select="foo"/>
+    <xsl:param name="order" select="foo"/>
+      <!-- Added a string to be sure that this scripts are run
+           before the selected one -->
+    <xsl:variable name="insert_order" select="concat($order,'_0')"/>
+      <!-- Add an xsl:if block for each referenced sect1 you want
+           to insert scripts before -->
+    <xsl:if test="$reference = 'ID_of_selected_sect1'">
+        <!-- Add an exsl:document block for each script to be inserted
+             at this point of the build. This one is only a dummy example. -->
+        <!-- See blfs-tool.xsl for exsl:document examples -->
+      <exsl:document href="{$insert_order}01-dummy" method="text">
+        <xsl:call-template name="header"/>
+        <xsl:text>
+PKG_PHASE=dummy
+PACKAGE=dummy
+VERSION=0.0.0
+TARBALL=dummy-0.0.0.tar.bz2
+DOWNLOAD=http://www.example.com/sources/dummy-0.0.0.tar.bz2
+MD5SUM=b0c2f10c23b1d529725c8f9c693858cf
+
+PATCH="http://www.example.com/sources/dummy-0.0.0.fix1.patch 65c913efccffda4b9dc66e9002e8516e"
+PATCH="http://www.example.com/sources/dummy-0.0.0.fix2.patch fb411aae8d1eb8a733bb1def9266f2ba"
+        </xsl:text>
+        <xsl:call-template name="disk_usage"/>
+        <xsl:call-template name="unpack"/>
+        <xsl:text>
+cd $PKGDIR
+./configure --prefix=/usr
+make
+make check
+make install
+        </xsl:text>
+        <xsl:call-template name="disk_usage"/>
+        <xsl:call-template name="clean_sources"/>
+        <xsl:call-template name="footer"/>
+      </exsl:document>
+    </xsl:if>
+  </xsl:template>
+
+
+    <!-- Hock for inserting scripts after a selected one -->
+  <xsl:template name="insert_script_after">
+      <!-- Inherited values -->
+    <xsl:param name="reference" select="foo"/>
+    <xsl:param name="order" select="foo"/>
+      <!-- Added a string to be sure that this scripts are run
+           after the selected one -->
+    <xsl:variable name="insert_order" select="concat($order,'_z')"/>
+      <!-- Add an xsl:if block for each referenced sect1 you want
+           to insert scripts after -->
+    <xsl:if test="$reference = 'ID_of_selected_sect1'">
+        <!-- Add an exsl:document block for each script to be inserted
+             at this point of the build. This one is only a dummy example. -->
+        <!-- See blfs-tool.xsl for exsl:document examples -->
+      <exsl:document href="{$insert_order}01-dummy" method="text">
+        <xsl:call-template name="header"/>
+        <xsl:text>
+PKG_PHASE=dummy
+PACKAGE=dummy
+VERSION=0.0.0
+TARBALL=dummy-0.0.0.tar.bz2
+DOWNLOAD=http://www.example.com/sources/dummy-0.0.0.tar.bz2
+MD5SUM=b0c2f10c23b1d529725c8f9c693858cf
+
+PATCH="http://www.example.com/sources/dummy-0.0.0.fix1.patch 65c913efccffda4b9dc66e9002e8516e"
+PATCH="http://www.example.com/sources/dummy-0.0.0.fix2.patch fb411aae8d1eb8a733bb1def9266f2ba"
+        </xsl:text>
+        <xsl:call-template name="disk_usage"/>
+        <xsl:call-template name="unpack"/>
+        <xsl:text>
+cd $PKGDIR
+./configure --prefix=/usr
+make
+make check
+make install
+        </xsl:text>
+        <xsl:call-template name="disk_usage"/>
+        <xsl:call-template name="clean_sources"/>
+        <xsl:call-template name="footer"/>
+      </exsl:document>
+    </xsl:if>
+  </xsl:template>
+
+
+<!-- ######################################################################## -->
+
+<!-- ########## TEMPLATES TO SELECT THE MODE USED ON SCREEN BLOCKS ########## -->
+
+<!-- NOTE: Testsuites commands are handled on the master stylesheets -->
+
+
+    <!-- userinput @remap='pre' -->
+  <xsl:template match="userinput[@remap='pre']">
+    <xsl:apply-templates select="." mode="pre"/>
+  </xsl:template>
+
+
+    <!-- userinput @remap='configure' -->
+  <xsl:template match="userinput[@remap='configure']">
+    <xsl:apply-templates select="." mode="configure"/>
+  </xsl:template>
+
+
+    <!-- userinput @remap='make' -->
+  <xsl:template match="userinput[@remap='make']">
+    <xsl:apply-templates select="." mode="make"/>
+  </xsl:template>
+
+
+    <!-- userinput @remap='install' -->
+  <xsl:template match="userinput[@remap='install']">
+    <xsl:apply-templates select="." mode="install"/>
+  </xsl:template>
+
+
+    <!-- userinput @remap='adjust' -->
+  <xsl:template match="userinput[@remap='adjust']">
+    <xsl:apply-templates select="." mode="adjust"/>
+  </xsl:template>
+
+
+    <!-- userinput @remap='locale-full' -->
+  <xsl:template match="userinput[@remap='locale-full']">
+    <xsl:apply-templates select="." mode="locale-full"/>
+  </xsl:template>
+
+
+
+    <!-- userinput without @remap -->
+  <xsl:template match="userinput">
+    <xsl:choose>
+      <xsl:when test="ancestor::sect2[@role='configuration']">
+        <xsl:apply-templates select="." mode="configuration_section"/>
+      </xsl:when>
+      <xsl:otherwise>
+        <xsl:apply-templates select="." mode="no_remap"/>
+      </xsl:otherwise>
+    </xsl:choose>
+  </xsl:template>
+
+
+<!-- ######################################################################## -->
+
+<!-- ############## STOCK MODE TEMPLATES USED ON SCREEN BLOCKS ############## -->
+
+<!-- NOTE: You can use this modes or create you own ones -->
+
+
+    <!-- mode pre  -->
+  <xsl:template match="userinput" mode="pre">
+    <xsl:apply-templates select="." mode="default"/>
+  </xsl:template>
+
+
+    <!-- mode configure  -->
+  <xsl:template match="userinput" mode="configure">
+    <xsl:apply-templates select="." mode="default"/>
+  </xsl:template>
+
+
+    <!-- mode make  -->
+  <xsl:template match="userinput" mode="make">
+    <xsl:apply-templates select="." mode="default"/>
+  </xsl:template>
+
+
+    <!-- mode install  -->
+  <xsl:template match="userinput" mode="install">
+    <xsl:apply-templates select="." mode="default"/>
+  </xsl:template>
+
+
+    <!-- mode adjust  -->
+  <xsl:template match="userinput" mode="adjust">
+    <xsl:apply-templates select="." mode="default"/>
+  </xsl:template>
+
+
+    <!-- mode locale-full  -->
+  <xsl:template match="userinput" mode="locale-full">
+    <xsl:apply-templates select="." mode="default"/>
+  </xsl:template>
+
+
+    <!-- mode configuration_section  -->
+  <xsl:template match="userinput" mode="configuration_section">
+    <xsl:apply-templates select="." mode="default"/>
+  </xsl:template>
+
+
+    <!-- mode no_remap  -->
+  <xsl:template match="userinput" mode="no_remap">
+    <xsl:apply-templates select="." mode="default"/>
+  </xsl:template>
+
+
+    <!-- mode default  -->
+  <xsl:template match="userinput" mode="default">
+    <xsl:apply-templates/>
+  </xsl:template>
+
+</xsl:stylesheet>

blfs-tool

@@ -0,0 +1,182 @@
+#!/bin/bash
+# $Id$
+
+set -e
+
+# From common/common-functions
+# VT100 colors
+declare -r  BLACK=$'\e[1;30m'
+declare -r  DK_GRAY=$'\e[0;30m'
+
+declare -r  RED=$'\e[31m'
+declare -r  GREEN=$'\e[32m'
+declare -r  YELLOW=$'\e[33m'
+declare -r  BLUE=$'\e[34m'
+declare -r  MAGENTA=$'\e[35m'
+declare -r  CYAN=$'\e[36m'
+declare -r  WHITE=$'\e[37m'
+
+declare -r  OFF=$'\e[0m'
+declare -r  BOLD=$'\e[1m'
+declare -r  REVERSE=$'\e[7m'
+declare -r  HIDDEN=$'\e[8m'
+
+declare -r  tab_=$'\t'
+declare -r  nl_=$'\n'
+
+declare -r   DD_BORDER="${BOLD}==============================================================================${OFF}"
+declare -r   SD_BORDER="${BOLD}------------------------------------------------------------------------------${OFF}"
+declare -r STAR_BORDER="${BOLD}******************************************************************************${OFF}"
+
+# bold yellow > <  pair
+declare -r R_arrow=$'\e[1;33m>\e[0m'
+declare -r L_arrow=$'\e[1;33m<\e[0m'
+
+
+#>>>>>>>>>>>>>>>ERROR TRAPPING >>>>>>>>>>>>>>>>>>>>
+#-----------------------#
+simple_error() {        # Basic error trap.... JUST DIE
+#-----------------------#
+  # If +e then disable text output
+  if [[ "$-" =~ e ]]; then
+    echo -e "\n${RED}ERROR:${GREEN} basic error trapped!${OFF}\n" >&2
+  fi
+}
+
+see_ya() {
+    echo -e "\n${L_arrow}${BOLD}jhalfs-X${R_arrow} exit${OFF}\n"
+}
+##### Simple error TRAPS
+# ctrl-c   SIGINT
+# ctrl-y
+# ctrl-z   SIGTSTP
+# SIGHUP   1 HANGUP
+# SIGINT   2 INTRERRUPT FROM KEYBOARD Ctrl-C
+# SIGQUIT  3
+# SIGKILL  9 KILL
+# SIGTERM 15 TERMINATION
+# SIGSTOP 17,18,23 STOP THE PROCESS
+#####
+set -e
+trap see_ya 0
+trap simple_error ERR
+trap 'echo -e "\n\n${RED}INTERRUPT${OFF} trapped\n" &&  exit 2'  1 2 3 15 17 18 23
+#>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+
+# envars not sourced from configuration file
+COMMON_DIR="common"
+VERBOSITY=1
+
+[[ $VERBOSITY > 0 ]] && echo -n "Loading config params from <configuration>..."
+source configuration
+[[ $? > 0 ]] && echo "file:configuration did not load.." && exit 1
+[[ $VERBOSITY > 0 ]] && echo "OK"
+
+[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_check_version.sh>..."
+source $COMMON_DIR/libs/func_check_version.sh
+[[ $? > 0 ]] && echo " function module did not load.." && exit 2
+[[ $VERBOSITY > 0 ]] && echo "OK"
+
+[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_validate_configs.sh>..."
+source $COMMON_DIR/libs/func_validate_configs.sh
+[[ $? > 0 ]] && echo " function module did not load.." && exit 2
+[[ $VERBOSITY > 0 ]] && echo "OK"
+[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
+
+# Be sure that we have a configuration file
+[[ -z $BOOK_BLFS ]] && echo -e "\nNo BLFS configuration found. Please configure it." && exit 1
+
+# Set default book version
+BRANCH_ID=${BRANCH_ID:=development}
+
+# Set the SVN tree
+case $BRANCH_ID in
+  development )  TREE=trunk/BOOK ;;
+       *EDIT* )  echo " You forgot to set the branch or stable book version."
+                 echo " Please rerun make and fix the configuration."
+                 exit 2 ;;
+     branch-* )  TREE=branches/${BRANCH_ID#branch-} ;;
+            * )  TREE=tags/${BRANCH_ID} ;;
+esac
+
+# Check for minimun dependencies versions
+xsltprocVer=`xsltproc -V | head -n1 `
+  libxmlVer=$(echo $xsltprocVer | cut -d " " -f3)
+ libxsltVer=$(echo $xsltprocVer | cut -d " " -f5)
+    tidyVer=`tidy -V | cut -d " " -f9`
+
+  # Version numbers are packed strings not xx.yy.zz format.
+check_version "2.06.20"  "${libxmlVer:0:1}.${libxmlVer:1:2}.${libxmlVer:3:2}"     "LIBXML2"
+check_version "1.01.14"  "${libxsltVer:0:1}.${libxsltVer:1:2}.${libxsltVer:3:2}"  "LIBXSLT"
+check_version "2004"     "${tidyVer}"                                             "TIDY"
+
+XML_FILE="<?xml version='1.0' encoding='ISO-8859-1'?>
+<?xml-stylesheet type='text/xsl' href='http://docbook.sourceforge.net/release/xsl/1.69.1/xhtml/docbook.xsl'?>
+<!DOCTYPE article PUBLIC '-//OASIS//DTD DocBook XML V4.5//EN'
+  'http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd'>
+<article>
+  <title>Test file</title>
+  <sect1>
+    <title>Some title</title>
+    <para>Some text</para>
+  </sect1>
+</article>"
+
+if `echo $XML_FILE | xmllint -noout -postvalid - 2>/dev/null` ; then
+  check_version "4.5" "4.5" "DocBook XML DTD"
+else
+  echo "Warning: not found a working DocBook XML DTD 4.5 installation"
+  exit 2
+fi
+
+# if `echo $XML_FILE | xsltproc --noout - 2>/dev/null` ; then
+#   check_version "1.69.1" "1.69.1" "DocBook XSL"
+# else
+#   echo "Warning: not found a working DocBook XSL 1.69.1 installation"
+#   exit 2
+# fi
+
+echo "${SD_BORDER}${nl_}"
+
+# For consistency with other books
+validate_config
+echo "${SD_BORDER}${nl_}"
+echo -n "Are you happy with these settings? yes/no (no): "
+read ANSWER
+if [ x$ANSWER != "xyes" ] ; then
+  echo "${nl_}Rerun make to fix the configuration options.${nl_}"
+  exit 1
+fi
+echo "${nl_}${SD_BORDER}${nl_}"
+
+# Install the files
+[[ ! -d $BLFS_ROOT ]] && mkdir -p $BLFS_ROOT
+
+cp -r BLFS/* $BLFS_ROOT
+cp -r menu $BLFS_ROOT
+cp $COMMON_DIR/progress_bar.sh $BLFS_ROOT
+cp README.BLFS $BLFS_ROOT
+
+# Start the work
+cd $BLFS_ROOT
+
+# Clean-up
+rm -rf libs/.svn
+rm -rf menu/.svn
+rm -rf menu/lxdialog/.svn
+
+
+# Set some harcoded envars to their proper values
+sed -i 's,blfs-xml,'$BLFS_XML',' update_book.sh libs/book.xsl
+sed -i 's,tracking-dir,'$TRACKING_DIR',' update_book.sh gen-makefile.sh
+
+# Fetch book sources and create packages and meta-packages dependencies files
+if [[ -d $BLFS_XML ]] ; then
+  ./update_book.sh
+else
+  ./update_book.sh get $BLFS_XML $TREE
+fi
+
+# Run the menuconfig interface
+make -B
+

common/chroot.xsl

@@ -1,97 +0,0 @@
-<?xml version="1.0" encoding="ISO-8859-1"?>
-
-<xsl:stylesheet
-      xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-      xmlns:exsl="http://exslt.org/common"
-      extension-element-prefixes="exsl"
-      version="1.0">
-
-  <xsl:param name="jobs_2" select="1"/>
-
-  <xsl:template match="/">
-    <xsl:apply-templates select="//sect1"/>
-  </xsl:template>
-
-  <xsl:template match="sect1">
-    <xsl:if
-       test="descendant::screen/userinput[contains(string(),'&#xA;chroot') or
-                                          starts-with(string(),'chroot')]">
-   <!-- The file names -->
-      <xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
-      <xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
-      <xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
-      <!-- The build order -->
-      <xsl:variable name="position" select="position()"/>
-      <xsl:variable name="order">
-        <xsl:choose>
-          <xsl:when test="string-length($position) = 1">
-            <xsl:text>00</xsl:text>
-            <xsl:value-of select="$position"/>
-          </xsl:when>
-          <xsl:when test="string-length($position) = 2">
-            <xsl:text>0</xsl:text>
-            <xsl:value-of select="$position"/>
-          </xsl:when>
-          <xsl:otherwise>
-            <xsl:value-of select="$position"/>
-          </xsl:otherwise>
-        </xsl:choose>
-      </xsl:variable>
-      <!-- Creating dirs and files -->
-      <exsl:document href="{$order}-{$filename}" method="text">
-        <xsl:text>#!/bin/bash&#xA;</xsl:text>
-      <xsl:apply-templates
-           select=".//userinput[contains(string(),'&#xA;chroot') or
-                                starts-with(string(),'chroot')]"/>
-      <xsl:text>exit&#xA;</xsl:text>
-    </exsl:document>
-    </xsl:if>
-  </xsl:template>
-
-  <xsl:template match="userinput">
-    <xsl:call-template name="extract-chroot">
-      <xsl:with-param name="instructions" select="string()"/>
-    </xsl:call-template>
-  </xsl:template>
-
-  <xsl:template name="extract-chroot">
-    <xsl:param name="instructions" select="''"/>
-    <xsl:choose>
-      <xsl:when test="contains($instructions, '$(nproc || echo 1)')">
-        <xsl:call-template name="extract-chroot">
-          <xsl:with-param
-            name="instructions"
-            select="concat(substring-before($instructions, '$(nproc || echo 1)'), $jobs_2, substring-after($instructions, '$(nproc || echo 1)'))"/>
-        </xsl:call-template>
-      </xsl:when>
-      <xsl:when test="not(starts-with($instructions,'&#xA;chroot')) and
-                      contains($instructions, '&#xA;chroot')">
-        <xsl:call-template name="extract-chroot">
-          <xsl:with-param name="instructions"
-              select="substring(substring-after($instructions,
-                                      substring-before($instructions,
-                                                       '&#xA;chroot')),2)"/>
-        </xsl:call-template>
-      </xsl:when>
-      <xsl:when test="contains($instructions,'\&#xA;')">
-        <xsl:copy-of select="substring-before($instructions,'\&#xA;')"/>
-        <xsl:text>\
-</xsl:text>
-        <xsl:call-template name="extract-chroot">
-          <xsl:with-param name="instructions"
-                          select="substring-after($instructions,'\&#xA;')"/>
-        </xsl:call-template>
-      </xsl:when>
-      <xsl:when test="contains($instructions,'&#xA;')">
-        <xsl:copy-of select="substring-before($instructions,'&#xA;')"/>
-        <xsl:text>
-</xsl:text>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:copy-of select="$instructions"/>
-        <xsl:text>
-</xsl:text>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-</xsl:stylesheet>

common/common-functions

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# $Id$
+
 set -e
 
 
@@ -32,12 +34,10 @@ run_make() {                 #
       exit 1
     fi
     # Build the system
-    if [ -e "$MKFILE" ] ; then
+    if [ -e $MKFILE ] ; then
       echo -ne "Building the system...\n"
-#      if { echo try tty; tty; }; then
+      cd $JHALFSDIR && make
-      cd "$JHALFSDIR" && make -j1
       echo -ne "done\n"
-#      else echo there is no terminal!!; fi
     fi
   fi
 }
@@ -46,57 +46,64 @@ run_make() {                 #
 #----------------------------#
 clean_builddir() {           #
 #----------------------------#
-# Test if the clean must be done.
+  # Test if the clean must be done.
-if [ "${CLEAN}" = "y" ]; then
+  if [ "${CLEAN}" = "y" ]; then
-  # If empty (i.e. could contain lost+found), do not do anything
-  if ls -d $BUILDDIR/* > /dev/null 2>&1 &&
-       [ "$(ls $BUILDDIR)" != "lost+found" ]; then
     # Test to make sure that the build directory was populated by jhalfs
     if [ ! -d $JHALFSDIR ] || [ ! -d $BUILDDIR/sources ] ; then
       echo "Looks like $BUILDDIR was not populated by a previous jhalfs run."
       exit 1
     # Test that dev filesystems are not mounted in $BUILDDIR
     elif mount | grep $BUILDDIR/dev > /dev/null ; then
-      echo "Looks like kernel filesystems are still mounted on $BUILDDIR."
+      echo "Looks like kernel fylesystems are yet mounted on $BUILDDIR."
       exit 1
     else
-      if [ $JHALFSDIR/*gcc-pass1 != $JHALFSDIR/'*gcc-pass1' ]; then
-        echo -n "$BUILDDIR contains already built packages. Clean anyway? yes/no (yes): "
-        read ANSWER
-        if [ x${ANSWER:0:1} = "xn" -o x${ANSWER:0:1} = "xN" ] ; then
-          echo "${nl_}Rerun and change the option in the menu.${nl_}"
-          exit 1
-        fi
-      fi
       # Clean the build directory
       echo -n "Cleaning $BUILDDIR ..."
-      # First delete proc and sys directories, if they exist.
+      # First delete proc and sys directories, if exist.
-      # Both should be empty. If not, we exit, and the rmdir command
+      # Both should be empty, if not be sure to exit.
-      # has generated an error message
       if [ -d $BUILDDIR/proc ] ; then
         sudo rmdir $BUILDDIR/proc || exit 1
       fi
       if [ -d $BUILDDIR/sys ] ; then
         sudo rmdir $BUILDDIR/sys || exit 1
       fi
-      sudo rm -rf $BUILDDIR/{bin,boot,dev,etc,home,lib{,64,32,x32},media,mnt,run}
+      sudo rm -rf $BUILDDIR/{bin,boot,dev,etc,home,lib,media,mnt,opt,root,sbin,srv,tmp,tools,cross-tools,usr,var}
-      sudo rm -rf $BUILDDIR/{opt,root,sbin,srv,tmp,tools,cross-tools,usr,var}
       echo "done"
-      if [[ "${BLFS_TOOL}" = "y" ]] ; then
-        echo -n "Cleaning $BUILDDIR/$BLFS_ROOT ..."
-        sudo rm -rf $BUILDDIR/$BLFS_ROOT
-        echo "done"
-      fi
       echo -n "Cleaning $JHALFSDIR ..."
       sudo rm -rf $JHALFSDIR
       echo "done"
-      echo -n "Cleaning remaining extracted sources in $BUILDDIR/sources ..."
+      echo -n "Cleaning remainig extracted sources in $BUILDDIR/sources ..."
-      sudo rm -rf `find $BUILDDIR/sources -maxdepth 1 -mindepth 1 -type d`
+      sudo rm -rf `find $BUILDDIR/sources/* -maxdepth 0 -type d`
-      echo "done"
-      echo -n "Removing dangling symlinks in / ..."
-      sudo rm -f /tools /cross-tools
       echo "done"
     fi
   fi
-fi
 }
+
+VERBOSITY2=$VERBOSITY
+
+[[ $VERBOSITY2 > 0 ]] && echo ""
+
+[[ $VERBOSITY2 > 0 ]] && echo -n "Loading <func_book_parser>..."
+source $COMMON_DIR/libs/func_book_parser
+[[ $? > 0 ]] && echo "file libs/func_book_parser did not load.." && exit 1
+[[ $VERBOSITY2 > 0 ]] && echo "OK"
+
+
+[[ $VERBOSITY2 > 0 ]] && echo -n "Loading <func_download_pkgs>..."
+source $COMMON_DIR/libs/func_download_pkgs
+[[ $? > 0 ]] && echo "file libs/func_download_pkgs did not load.." && exit 1
+[[ $VERBOSITY2 > 0 ]] && echo "OK"
+
+
+[[ $VERBOSITY2 > 0 ]] && echo -n "Loading <func_wrt_Makefile>..."
+source $COMMON_DIR/libs/func_wrt_Makefile
+[[ $? > 0 ]] && echo "file libs/func_wrt_Makefile did not load.." && exit 1
+[[ $VERBOSITY2 > 0 ]] && echo "OK"
+
+
+[[ $VERBOSITY2 > 0 ]] && echo -n "Loading <func_blfs_deps>..."
+source $COMMON_DIR/libs/func_blfs_deps
+[[ $? > 0 ]] && echo "file libs/func_blfs_deps did not load.." && exit 1
+[[ $VERBOSITY2 > 0 ]] && echo "OK"
+
+[[ $VERBOSITY2 > 0 ]] && echo -n "    ..."

common/create-sbu_du-report.sh

@@ -1,38 +1,33 @@
 #!/bin/bash
+#$Id$
 
 set -e
 
 LOGSDIR=$1
 VERSION=$2
-DATE=$3
 
 LINE="================================================================================"
 
 # Make sure that we have a directory as first argument
-[ ! -d "$LOGSDIR" ] && \
+[[ ! -d "$LOGSDIR" ]] && \
-  echo -e "\nUSAGE: create-sbu_du-report.sh logs_directory [book_version] [date]\n" && exit
+  echo -e "\nUSAGE: create-sbu_du-report.sh logs_directory [book_version]\n" && exit
 
 # Make sure that the first argument is a jhalfs logs directory
-[ ! -f "$LOGSDIR"/000-masterscript.log ] && \
+[[ ! -f "$LOGSDIR"/000-masterscript.log ]] && \
   echo -e "\nLooks like $LOGSDIR isn't a jhalfs logs directory.\n" && exit
 
-# Make sure something has been built otherwise no need for report :)
-[ ! -f "$LOGSDIR"/???-binutils-pass1* ] && \
-  echo -e "\nLooks like nothing has been built yet. Aborting report.\n" && exit
-
 # If this script is run manually, the book version may be unknown
-[ -z "$VERSION" ] && VERSION=unknown
+[[ -z "$VERSION" ]] && VERSION=unknown
-[ -z "$DATE" ] && DATE=$(date --iso-8601)
 
 # If there is iteration logs directories, copy the logs inside iteration-1
 # to the top level dir
-[ -d "$LOGSDIR"/build_1 ] && \
+[[ -d "$LOGSDIR"/build_1 ]] && \
   cp $LOGSDIR/build_1/* $LOGSDIR
 
 # Set the report file
-REPORT="$VERSION"-SBU_DU-"$DATE".report
+REPORT="$VERSION"-SBU_DU-$(date --iso-8601).report
 
-[ -f "$REPORT" ] && : >$REPORT
+[ -f $REPORT ] && : >$REPORT
 
 # Dump generation time stamp and book version
 echo -e "\n`date`\n" > "$REPORT"
@@ -48,30 +43,19 @@ fi
 
 # Dump CPU and memory info
 echo -e "\n\n\t\tCPU type:\n" >> "$REPORT"
-lscpu >> "$REPORT"
+cat /proc/cpuinfo >> "$REPORT"
 echo -e "\n\t\tMemory info:\n" >> "$REPORT"
 free >> "$REPORT"
 
 # Parse only that logs that have time data
-pushd ${LOGSDIR}
+BUILDLOGS="`grep -l "^Totalseconds:" ${LOGSDIR}/*`"
-BUILDLOGS="`grep -l "^Totalseconds:" * | sort -n`"
 
 # Match the first timed log to extract the SBU unit value from it
-FIRSTLOG=`grep -l "^Totalseconds:" * | sort -n | head -n1`
+BASELOG=`grep -l "^Totalseconds:" $LOGSDIR/* | head -n1`
-BASELOG=`grep -l "^Totalseconds:" ???-binutils* | head -n1`
 echo -e "\nUsing ${BASELOG#*[[:digit:]]-} to obtain the SBU unit value."
 SBU_UNIT=`sed -n 's/^Totalseconds:\s\([[:digit:]]*\)$/\1/p' $BASELOG`
-popd
+echo -e "\nThe SBU unit value is equal to $SBU_UNIT seconds.\n"
-# Get the -j value of the SBU
+echo -e "\n\n$LINE\n\nThe SBU unit value is equal to $SBU_UNIT seconds.\n" >> "$REPORT"
-if [ "$(sed -n '/REALSBU/s/.*\([yn]\).*/\1/p' "$REPORT")" = y ]; then
-    J_VALUE="1"
-else
-    J_VALUE=$(sed -n '/N_PARALLEL/s/.*<\([^>]*\).*/\1/p' "$REPORT")
-fi
-# if jhalfs.config does not exist, or OPTIMIZE is 0, then J_VALUE is
-# still empty. Assume 1 in that case
-echo -e "\nThe SBU unit value is equal to $SBU_UNIT seconds at -j${J_VALUE:=1}.\n"
-echo -e "\n\n$LINE\n\nThe SBU unit value is equal to $SBU_UNIT seconds at -j$J_VALUE.\n" >> "$REPORT"
 
 # Set the first value to 0 for grand totals calculation
 SBU2=0
@@ -86,7 +70,7 @@ for log in $BUILDLOGS ; do
 
 # Start SBU calculation
 # Build time
-  TIME=`sed -n 's/^Totalseconds:\s\([[:digit:]]*\)$/\1/p' ${LOGSDIR}/$log`
+  TIME=`sed -n 's/^Totalseconds:\s\([[:digit:]]*\)$/\1/p' $log`
   SECS=`perl -e 'print ('$TIME' % '60')';`
   MINUTES=`perl -e 'printf "%.0f" , (('$TIME' - '$SECS') / '60')';`
   SBU=`perl -e 'printf "%.1f" , ('$TIME' / '$SBU_UNIT')';`
@@ -96,10 +80,10 @@ for log in $BUILDLOGS ; do
 
 # Start disk usage calculation
 # Disk usage before unpacking the package
-  DU1=`grep "^KB: " ${LOGSDIR}/$log | head -n1 | cut -f1 | sed -e 's/KB: //'`
+  DU1=`grep "^KB: " $log | head -n1 | cut -f1 | sed -e 's/KB: //'`
   DU1MB=`perl -e 'printf "%.3f" , ('$DU1' / '1024')';`
 # Disk usage before deleting the source and build dirs
-  DU2=`grep "^KB: " ${LOGSDIR}/$log | tail -n1 | cut -f1 | sed -e 's/KB: //'`
+  DU2=`grep "^KB: " $log | tail -n1 | cut -f1 | sed -e 's/KB: //'`
   DU2MB=`perl -e 'printf "%.3f" , ('$DU2' / '1024')';`
 # Calculate disk space required to do the build
   REQUIRED1=`perl -e 'print ('$DU2' - '$DU1')';`
@@ -107,7 +91,7 @@ for log in $BUILDLOGS ; do
 
 # Append installed files disk usage to the previous entry,
 # except for the first parsed log
-  if [ "$log" != "$FIRSTLOG" ] ; then
+  if [ "$log" != "$BASELOG" ] ; then
     INSTALL=`perl -e 'print ('$DU1' - '$DU1PREV')';`
     INSTALLMB=`perl -e 'printf "%.3f" , ('$DU1MB' - '$DU1MBPREV')';`
     echo -e "Installed files disk usage:\t\t\t\t$INSTALL KB or $INSTALLMB MB\n" >> $REPORT
@@ -131,19 +115,7 @@ for log in $BUILDLOGS ; do
 
 done
 
-# For printing the last 'Installed files disk usage', we need to 'du' the
-# root dir, excluding the jhalfs directory (and lost+found). We assume
-# that the rootdir is $LOGSDIR/../..
-DU1=`du -skx --exclude=jhalfs --exclude=lost+found --exclude var/lib $LOGSDIR/../.. | cut -f1`
-DU1MB=`perl -e 'printf "%.3f" , ('$DU1' / '1024')';`
-INSTALL=`perl -e 'print ('$DU1' - '$DU1PREV')';`
-INSTALLMB=`perl -e 'printf "%.3f" , ('$DU1MB' - '$DU1MBPREV')';`
-echo -e "Installed files disk usage:\t\t\t\t$INSTALL KB or $INSTALLMB MB\n" >> $REPORT
-# Append install values for grand total
-INSTALL2=`perl -e 'printf "%.3f" , ('$INSTALL2' + '$INSTALL')';`
-INSTALLMB2=`perl -e 'printf "%.3f" , ('$INSTALLMB2' + '$INSTALLMB')';`
-
 # Dump grand totals
-echo -e "\n$LINE\n\nTotal time required to build the system:\t\t$SBU2  SBU" >> $REPORT
+echo -e "\n$LINE\n\nTotal time required to build the systen:\t\t$SBU2  SBU" >> $REPORT
 # Total disk usage: including /tools but not /sources.
 echo -e "Total Installed files disk usage:\t\t\t$INSTALL2 KB or $INSTALLMB2 MB" >> $REPORT

common/hostreqs.xsl

@@ -1,78 +0,0 @@
-<?xml version="1.0" encoding="ISO-8859-1"?>
-
-<!-- Extracts minimal versions from LFS book host requirements,
-     and generates a script containing statements of the
-     form MIN_prog_VERSION=xx.yy.zz.
--->
-
-<xsl:stylesheet
-      xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-      version="1.0">
-
-  <xsl:output method="text"/>
-
-  <xsl:template match="/sect1">
-    <xsl:apply-templates select=".//listitem//emphasis"/>
-  </xsl:template>
-
-  <xsl:template match="emphasis">
-<!-- We assume that what is emphasized is in the form:
-aa...aa-dccsaaa (a anything except @, - "dash", d digit,
-                 c anything except space, s space)
-or
-aa...aasdccsaaa
-This means we have to replace digits with @, and look for '-@'
-or ' @' -->
-    <xsl:variable name="normalized-string"
-                  select="translate(normalize-space(string()),
-                                                    '0123456789',
-                                                    '@@@@@@@@@@')"/>
-    <xsl:variable name="begin-ver">
-      <xsl:choose>
-        <xsl:when test="contains($normalized-string,' @')">
-          <xsl:value-of select="string-length(substring-before($normalized-string,' @'))+1"/>
-        </xsl:when>
-        <xsl:otherwise>
-          <xsl:value-of select="string-length(substring-before($normalized-string,'-@'))+1"/>
-        </xsl:otherwise>
-      </xsl:choose>
-    </xsl:variable>
-
-    <xsl:variable name="remaining-part"
-                  select="substring($normalized-string,number($begin-ver)+1)"/>
-
-    <xsl:variable name="end-ver">
-      <xsl:choose>
-        <xsl:when test="contains($remaining-part,' ')">
-           <xsl:value-of
-             select="string-length(substring-before($remaining-part,' '))"/>
-        </xsl:when>
-        <xsl:otherwise>
-           <xsl:value-of
-             select="string-length($remaining-part)"/>
-        </xsl:otherwise>
-      </xsl:choose>
-    </xsl:variable>
-
-    <xsl:text>local MIN_</xsl:text>
-    <xsl:choose>
-      <xsl:when test="contains(string(),'Kernel')">
-        <xsl:text>Linux</xsl:text>
-      </xsl:when>
-      <xsl:when test="contains(string(),'GLIBC')">
-        <xsl:text>Glibc</xsl:text>
-      </xsl:when>
-      <xsl:when test="contains(string(),'XZ')">
-        <xsl:text>Xz</xsl:text>
-      </xsl:when>
-      <xsl:otherwise>
-<!-- We assume that there are no dash nor space in other names -->
-        <xsl:value-of select="substring(string(),1,number($begin-ver)-1)"/>
-      </xsl:otherwise>
-    </xsl:choose>
-    <xsl:text>_VER=</xsl:text>
-    <xsl:value-of select="substring(string(),number($begin-ver)+1,$end-ver)"/>
-    <xsl:text>
-</xsl:text>
-  </xsl:template>
-</xsl:stylesheet>

common/kernfs.xsl

@@ -1,84 +0,0 @@
-<?xml version="1.0" encoding="ISO-8859-1"?>
-
-<xsl:stylesheet
-      xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-      version="1.0">
-
-  <xsl:output method="text"/>
-
-  <xsl:template match="/">
-    <xsl:text>#!/bin/bash
-</xsl:text>
-    <xsl:apply-templates select="//userinput[contains(string(),'--bind') or
-                                             contains(string(),'/proc') or
-                                             contains(string(),'readlink') or
-                                             contains(string(),'-Rv')]"/>
-  </xsl:template>
-
-  <xsl:template match="userinput">
-    <xsl:call-template name="check-mount">
-      <xsl:with-param name="mytext" select="string()"/>
-    </xsl:call-template>
-    <xsl:text>
-</xsl:text>
-  </xsl:template>
-
-  <xsl:template name="check-mount">
-    <xsl:param name="mytext" select="''"/>
-    <xsl:choose>
-      <xsl:when test="contains($mytext,'&#xA;')">
-        <xsl:call-template name="check-mount">
-          <xsl:with-param name="mytext"
-                          select="substring-before($mytext,'&#xA;')"/>
-        </xsl:call-template>
-        <xsl:text>&#xA;</xsl:text>
-        <xsl:call-template name="check-mount">
-          <xsl:with-param name="mytext"
-                          select="substring-after($mytext,'&#xA;')"/>
-        </xsl:call-template>
-      </xsl:when>
-      <xsl:when test="starts-with(normalize-space($mytext),'mountpoint')">
-        <xsl:copy-of select="$mytext"/>
-      </xsl:when>
-      <xsl:when test="starts-with(normalize-space($mytext),'mount')">
-        <xsl:variable name="mountpoint">
-          <xsl:call-template name="last-arg">
-            <xsl:with-param name="myline" select="$mytext"/>
-          </xsl:call-template>
-        </xsl:variable>
-        <xsl:text>mountpoint -q </xsl:text>
-        <xsl:copy-of select="$mountpoint"/>
-        <xsl:text> || </xsl:text>
-        <xsl:copy-of select="$mytext"/>
-      </xsl:when>
-      <xsl:when test="starts-with(normalize-space($mytext),'umount')">
-        <xsl:variable name="mountpoint">
-          <xsl:call-template name="last-arg">
-            <xsl:with-param name="myline" select="$mytext"/>
-          </xsl:call-template>
-        </xsl:variable>
-        <xsl:text>mountpoint -q </xsl:text>
-        <xsl:copy-of select="$mountpoint"/>
-        <xsl:text> &amp;&amp; </xsl:text>
-        <xsl:copy-of select="$mytext"/>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:copy-of select="$mytext"/>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-
-  <xsl:template name="last-arg">
-    <xsl:param name="myline" select="''"/>
-    <xsl:choose>
-      <xsl:when test="contains($myline,' ')">
-        <xsl:call-template name="last-arg">
-          <xsl:with-param name="myline" select="substring-after($myline,' ')"/>
-        </xsl:call-template>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:copy-of select="$myline"/>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-</xsl:stylesheet>

common/libs/func_blfs_deps

@@ -0,0 +1,90 @@
+#!/bin/bash
+
+# $Id$
+
+
+#----------------------------------#
+blfs_tool_clean_scripts() {        # Remove unselected dependencies scripts
+#----------------------------------#
+
+  for file in ${PROGNAME}-commands/blfs-tool-deps/* ; do
+    # Keep the script file name
+    this_script=`basename $file`
+
+    case "${this_script}" in
+          *libxml2 ) [[ "${DEP_LIBXML}" = "n" ]]  && rm ${file} ;;
+          *libxslt ) [[ "${DEP_LIBXSLT}" = "n" ]] && rm ${file} ;;
+             *tidy ) [[ "${DEP_TIDY}" = "n" ]]    && rm ${file} ;;
+            *unzip ) [[ "${DEP_UNZIP}" = "n" ]]   && rm ${file} ;;
+      *docbook-xml ) [[ "${DEP_DBXML}" = "n" ]]   && rm ${file} ;;
+      *docbook-xsl ) [[ "${DEP_DBXSL}" = "n" ]]   && rm ${file} ;;
+              *gpm ) [[ "${DEP_GPM}" = "n" ]]     && rm ${file} ;;
+             *lynx ) [[ "${DEP_LYNX}" = "n" ]]    && rm ${file} ;;
+             *sudo ) [[ "${DEP_SUDO}" = "n" ]]    && rm ${file} ;;
+             *wget ) [[ "${DEP_WGET}" = "n" ]]    && rm ${file} ;;
+       *subversion ) [[ "${DEP_SVN}" = "n" ]]     && rm ${file} ;;
+    esac
+  done
+}
+
+
+#----------------------------------#
+wrt_blfs_tool_targets() {          #
+#----------------------------------#
+  PREV=""
+
+  echo "${tab_}${GREEN}Processing... ${L_arrow}BLFS_TOOL ${R_arrow}"
+
+  for file in blfs-tool-deps/* ; do
+    # Keep the script file name
+    this_script=`basename $file`
+
+    # Grab the phase name to be used with INSTALL_LOG and tracking dir touch
+    name=`grep "^PKG_PHASE=" ${file} | sed -e 's@PKG_PHASE=@@'`
+    # Grab also the package version
+    pkg_ver=`grep "^VERSION=" ${file} | sed -e 's@VERSION=@@'`
+
+    # Append each name of the script files to a list (this will become
+    # the names of the targets in the Makefile)
+    blfs_tool="$blfs_tool ${this_script}"
+
+    #--------------------------------------------------------------------#
+    #         >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<<          #
+    #--------------------------------------------------------------------#
+    #
+    # Drop in the name of the target on a new line, and the previous target
+    # as a dependency. Also call the echo_message function.
+    wrt_target "${this_script}" "$PREV"
+
+    # Touch timestamp file if installed files logs will be created.
+    if [ "$name" != "" ] && [ "${INSTALL_LOG}" = "y" ] ; then
+      wrt_TouchTimestamp
+    fi
+
+    # Run the script.
+    wrt_RunScript "$file"
+
+    # Write installed files log
+    if [ "$name" != "" ] && [ "${INSTALL_LOG}" = "y" ] ; then
+      wrt_LogNewFiles "$name"
+    fi
+
+    # Touch the tracking file.
+    if [ "$PROGNAME" = "clfs2" ]; then
+      echo -e "\t@touch \$(MOUNT_PT)$TRACKING_DIR/${name}-${pkg_ver}" >>  $MKFILE.tmp
+    else
+      echo -e "\t@touch $TRACKING_DIR/${name}-${pkg_ver}" >>  $MKFILE.tmp
+    fi
+
+    # Include a touch of the target name so make can check
+    # if it's already been made.
+    wrt_touch
+    #
+    #--------------------------------------------------------------------#
+    #              >>>>>>>> END OF Makefile ENTRY <<<<<<<<               #
+    #--------------------------------------------------------------------#
+
+    # Keep the script file name for Makefile dependencies.
+    PREV=${this_script}
+  done
+}

common/libs/func_book_parser

@@ -1,180 +1,166 @@
 #!/bin/bash
 
+# $Id$
+
 #----------------------------#
 get_book() {                 #
 #----------------------------#
   cd $JHALFSDIR
 
-  if [ -z "$WORKING_COPY" ] ; then
+  if [ -z $WORKING_COPY ] ; then
-# Check for Subversion or git instead of just letting the script fail.
+    # Check for Subversion instead of just letting the script hit 'svn' and fail.
-    test `type -p git` || eval "echo \"This feature requires Git.\"
+    test `type -p svn` || eval "echo \"This feature requires Subversion.\"
     exit 1"
+    echo -n "Downloading the $PROGNAME document, $LFSVRS version... "
 
-    echo -n "Downloading the lfs document, branch/tag/commit: $COMMIT... "
+    case $PROGNAME in
-
+      lfs) svn_root="LFS" ;;
+      hlfs) svn_root="HLFS" ;;
+      clfs) svn_root="cross-lfs" ;;
+      clfs2) svn_root="cross-lfs" ;;
+      clfs3) svn_root="cross-lfs" ;;
+      *) echo "BOOK not defined in function <get_book>"
+          exit 1 ;;
+    esac
     # Grab a fresh book if it's missing, otherwise, update it from the
     # repo. If we've already extracted the commands, move on to getting the
     # sources.
-    if [ ! -d "$BOOK"/.git ]; then
+    if [ -d ${PROGNAME}-$LFSVRS ] ; then
-        git clone "$REPO" "$BOOK" >>"$LOGDIR/$LOG" 2>&1
+      cd ${PROGNAME}-$LFSVRS
-        if [ "$COMMIT" != trunk ]; then
+      if LC_ALL=C svn up | grep -q At && \
-           pushd "$BOOK" >/dev/null
+         test -d $JHALFSDIR/${PROGNAME}-commands && \
-           echo "Checking out $COMMIT at $PWD"
+         test -f $JHALFSDIR/pkg_tarball_list ; then
-           git checkout "$COMMIT" >>"$LOGDIR/$LOG" 2>&1
+        # Set the canonical book version
-           popd >/dev/null
+        echo -ne "done\n"
+        cd $JHALFSDIR
+        case $PROGNAME in
+          clfs | clfs2 | clfs3 )
+            VERSION=$(xmllint --noent $BOOK/prologue/$ARCH/bookinfo.xml 2>/dev/null | grep subtitle | sed -e 's/^.*ion //'  -e 's/<\/.*//') ;;
+          *)
+            VERSION=$(xmllint --noent $BOOK/prologue/bookinfo.xml 2>/dev/null | grep subtitle | sed -e 's/^.*ion //'  -e 's/<\/.*//')  ;;
+        esac
+        get_sources
+      else
+        echo -ne "done\n"
+        extract_commands
       fi
     else
-      cd "$BOOK"
+      svn co $SVN/${svn_root}/${TREE} ${PROGNAME}-$LFSVRS >>$LOGDIR/$LOG 2>&1
-      # If the repo is in "detached head" state, git pull fails, so get
-      # back first to trunk:
-      git checkout trunk >>"$LOGDIR/$LOG" 2>&1
-      git pull >>"$LOGDIR/$LOG" 2>&1
-      if [ "$COMMIT" != "trunk" ]; then
-         git checkout "$COMMIT" >>"$LOGDIR/$LOG" 2>&1
-      fi
-    fi
       echo -ne "done\n"
-
+      extract_commands
-  else # Working copy
-    echo -ne "Using $BOOK as book's sources ...\n"
     fi
+
+  else
+    echo -ne "Using $BOOK as book's sources ...\n"
+    extract_commands
+  fi
+  echo -ne " Document version ${L_arrow}${BOLD}${VERSION}${R_arrow}\n"
 }
 
 #----------------------------#
 extract_commands() {         #
 #----------------------------#
 
+  # Check for libxslt instead of just letting the script hit 'xsltproc' and fail.
+  test `type -p xsltproc` || eval "echo \"This feature requires libxslt.\"
+  exit 1"
+
   cd $JHALFSDIR
-  # Clean
+  case $PROGNAME in
-  rm -rf "$COMMANDS"
+    clfs | clfs2 | clfs3 )
+      VERSION=$(xmllint --noent $BOOK/prologue/$ARCH/bookinfo.xml 2>/dev/null | grep subtitle | sed -e 's/^.*ion //'  -e 's/<\/.*//') ;;
+    *)
+      VERSION=$(xmllint --noent $BOOK/prologue/bookinfo.xml 2>/dev/null | grep subtitle | sed -e 's/^.*ion //'  -e 's/<\/.*//')  ;;
+  esac
 
-  # Extract the commands
+  # Start clean
+  if [ -d ${PROGNAME}-commands ]; then
+    rm -rf ${PROGNAME}-commands
+    mkdir -v ${PROGNAME}-commands
+  fi
   echo -n "Extracting commands for"
-  echo -n " ${L_arrow}${BOLD}LFS${R_arrow} build... "
-  # The scripts pages are xincluded by the book, so must
-  # be generated for running xsltproc
-  pushd $BOOK > /dev/null
-  if [ -f process-scripts.sh ]; then
-    bash process-scripts.sh >> $LOGDIR/$LOG 2>&1
-  fi
-  # Recent git versions need version.ent to be generated
-  if [ -f git-version.sh ]; then
-    bash git-version.sh "$INITSYS" >> $LOGDIR/$LOG 2>&1
-  fi
-  popd > /dev/null
 
-  if [ "$ALL_CORES" = "y" ]; then
+  # Dump the commands in shell script form from the book.
-	  JOBS="\$(nproc)"
+  case ${PROGNAME} in
-  else
+    clfs)
-	  JOBS="$N_PARALLEL"
+        echo -n " ${L_arrow}${BOLD}$ARCH${R_arrow} target architecture... "
-  fi
-  if [ "$REALSBU" = y ]; then JOBSBP1=1; else JOBSBP1="$JOBS"; fi
-
-  # First profile the book, for revision and arch. Note that
-  # MULTIBLIB is set to "default" if pure 64 bit book. In this case,
-  # profiling on arch is useless, but does not hurt either.
         xsltproc --nonet \
                  --xinclude \
-           --stringparam profile.revision "$INITSYS"    \
+                 --stringparam method $METHOD \
-           --stringparam profile.arch     "$MULTILIB"   \
+                 --stringparam testsuite $TEST \
-           --output prbook.xml                          \
+                 --stringparam bomb-testsuite $BOMB_TEST \
-           $BOOK/stylesheets/lfs-xsl/profile.xsl        \
+                 --stringparam vim-lang $VIMLANG \
-           $BOOK/index.xml >> $LOGDIR/$LOG 2>&1
+                 --stringparam timezone $TIMEZONE \
+                 --stringparam page $PAGE \
+                 --stringparam lang $LANG \
+                 --stringparam sparc $SPARC64_PROC \
+                 -o ./${PROGNAME}-commands/ $XSL $BOOK/$ARCH-index.xml >>$LOGDIR/$LOG 2>&1
+      ;;
 
-  # Use the profiled book for generating the scriptlets
+    clfs2)
+        echo -n " ${L_arrow}${BOLD}$ARCH${R_arrow} target architecture... "
         xsltproc --nonet \
-           --stringparam testsuite      "$TEST"         \
+                 --xinclude \
-           --stringparam ncurses5       "$NCURSES5"     \
+                 --stringparam vim-lang $VIMLANG \
-           --stringparam strip          "$STRIP"        \
+                 --stringparam timezone $TIMEZONE \
-           --stringparam del-la-files   "$DEL_LA_FILES" \
+                 --stringparam page $PAGE \
-           --stringparam full-locale    "$FULL_LOCALE"  \
+                 --stringparam lang $LANG \
-           --stringparam timezone       "$TIMEZONE"     \
+                 -o ./${PROGNAME}-commands/ $XSL $BOOK/$ARCH-index.xml >>$LOGDIR/$LOG 2>&1
-           --stringparam page           "$PAGE"         \
+      ;;
-           --stringparam lang           "$LANG"         \
+
-           --stringparam pkgmngt        "$PKGMNGT"      \
+    clfs3)
-           --stringparam wrap-install   "$WRAP_INSTALL" \
+        echo -n " ${L_arrow}${BOLD}$ARCH${R_arrow} target architecture... "
-           --stringparam hostname       "$HOSTNAME"     \
+        xsltproc --nonet \
-           --stringparam interface      "$INTERFACE"    \
+                 --xinclude \
-           --stringparam ip             "$IP_ADDR"      \
+                 --stringparam endian x$ENDIAN \
-           --stringparam gateway        "$GATEWAY"      \
+                 --stringparam timezone $TIMEZONE \
-           --stringparam prefix         "$PREFIX"       \
+                 --stringparam page $PAGE \
-           --stringparam broadcast      "$BROADCAST"    \
+                 --stringparam lang $LANG \
-           --stringparam domain         "$DOMAIN"       \
+                 -o ./${PROGNAME}-commands/ $XSL $BOOK/$ARCH-index.xml >>$LOGDIR/$LOG 2>&1
-           --stringparam nameserver1    "$DNS1"         \
+      ;;
-           --stringparam nameserver2    "$DNS2"         \
+
-           --stringparam font           "$FONT"         \
+    hlfs)
-           --stringparam fontmap        "$FONTMAP"      \
+        echo -n " ${L_arrow}${BOLD}$MODEL + $KERNEL${R_arrow} HLFS flavour... "
-           --stringparam unicode        "$UNICODE"      \
+        xsltproc --nonet \
-           --stringparam keymap         "$KEYMAP"       \
+                 --xinclude \
-           --stringparam local          "$LOCAL"        \
+                 --stringparam model $MODEL \
-           --stringparam log-level      "$LOG_LEVEL"    \
+                 --stringparam kernel $KERNEL \
-           --stringparam script-root    "$SCRIPT_ROOT"  \
+                 --stringparam testsuite $TEST \
-           --stringparam jobs           "$JOBS"         \
+                 --stringparam bomb-testsuite $BOMB_TEST \
-           --stringparam jobs-bp1       "$JOBSBP1"      \
+                 --stringparam features x$SSP$ASLR$PAX$HARDENED_TMP$WARNINGS$MISC$BLOWFISH \
-           --output "./${COMMANDS}/"                    \
+                 --stringparam timezone $TIMEZONE \
-           $XSL                                         \
+                 --stringparam page $PAGE \
-           prbook.xml >> $LOGDIR/$LOG 2>&1
+                 --stringparam lang $LANG \
-  # Remove flags requesting user action in some cases. Much easier here than
+                 --stringparam grsecurity_host $GRSECURITY_HOST \
-  # in the stylesheet...
+                 -o ./${PROGNAME}-commands/ $XSL $BOOK/index.xml >>$LOGDIR/$LOG 2>&1
-  sed -i 's/-iv /-v /' "./${COMMANDS}/"chapter??/*kernel*
+      ;;
-  # If doing a destdir install (PM without wrap), the gcc instructions
+    lfs)
-  # fail for two reasons: a missing dir, and gcc -dumpmachine returns a
+        echo -n " ${L_arrow}${BOLD}LFS${R_arrow} build... "
-  # wrong string.
+        xsltproc --nonet \
-  if [ "$PKGMNGT" = y ] && [ "$WRAP_INSTALL" = n ]; then
+                 --xinclude \
-    sed -e 's|(gcc|&/xgcc|' \
+                 --stringparam testsuite $TEST \
-        -e '/lto_plug/imkdir -pv $PKG_DEST/usr/lib/bfd-plugins' \
+                 --stringparam bomb-testsuite $BOMB_TEST \
-        -i ./${COMMANDS}/chapter08/*gcc
+                 --stringparam vim-lang $VIMLANG \
-  fi
+                 --stringparam timezone $TIMEZONE \
+                 --stringparam page $PAGE \
+                 --stringparam lang $LANG \
+                 --stringparam custom-tools $CUSTOM_TOOLS \
+                 --stringparam blfs-tool $BLFS_TOOL \
+                 --stringparam optimize $OPTIMIZE \
+                 -o ./${PROGNAME}-commands/ $XSL $BOOK/index.xml >>$LOGDIR/$LOG 2>&1
+      ;;
+    *)  echo -n " ${L_arrow}${BOLD}${PROGNAME}${R_arrow} book invalid, terminate build... "
+        exit 1 ;;
+  esac
+
+  [[ "${BLFS_TOOL}" = "y" ]] && blfs_tool_clean_scripts
+
   echo "done"
 
   # Make the scripts executable.
-  chmod -R +x "$JHALFSDIR/${COMMANDS}"
+  chmod -R +x $JHALFSDIR/${PROGNAME}-commands
-  create_chroot_scripts
-  create_kernfs_scripts
-
-  # we create the VERSION variable here. Should maybe go into its own
-  # function. But at this point we can use the profiled xml to get
-  # version from lfs-release in the lfs case.
-  VERSION=$(grep 'echo.*lfs-release' prbook.xml | sed 's/.*echo[ ]*\([^ ]*\).*/\1/')
 
   # Done. Moving on...
   get_sources
-}
-
-#----------------------------#
-create_chroot_scripts() {    #
-#----------------------------#
-
-  rm -rf chroot-scripts
-  echo -n "Creating chroot commands scripts from $BOOK"
-  if [ ! -z $ARCH ] ; then echo -n " $ARCH" ; fi
-  echo -n "... "
-  xsltproc --nonet --xinclude \
-           --stringparam jobs_2 "$JOBS_2" \
-           -o chroot-scripts/ chroot.xsl  \
-           $BOOK/chapter0?/*chroot*.xml >> $LOGDIR/$LOG 2>&1
-  echo "done"
-
-}
-
-#----------------------------#
-create_kernfs_scripts() {    #
-#----------------------------#
-
-  rm -rf kernfs-scripts
-  mkdir kernfs-scripts
-  echo -n "Creating virtual kernel FS commands scripts from $BOOK"
-  if [ ! -z $ARCH ] ; then echo -n " $ARCH" ; fi
-  echo -n "... "
-  xsltproc --nonet \
-           -o kernfs-scripts/devices.sh kernfs.xsl \
-           $BOOK/*/kernfs.xml >> $LOGDIR/$LOG 2>&1
-  chmod +x kernfs-scripts/devices.sh
-  xsltproc --nonet \
-           -o kernfs-scripts/teardown.sh kernfs.xsl \
-           $BOOK/chapter??/reboot.xml >> $LOGDIR/$LOG 2>&1
-  chmod +x kernfs-scripts/teardown.sh
-
-  echo "done"
 
 }

common/libs/func_check_version.sh

@@ -1,3 +1,5 @@
+# $Id$
+
 check_version() {
 : <<inline_doc
       Tests for a minimum version level. Compares to version numbers and forces an
@@ -21,9 +23,6 @@ inline_doc
   declare -i major minor revision change
   declare -i ref_major ref_minor ref_revision ref_change
   declare -r spaceSTR="         "
-  declare -r spaceSTR1="                 "
-
-  shopt -s extglob	#needed for ${x##*(0)} below
 
   ref_version=$1
   tst_version=$2
@@ -33,11 +32,11 @@ inline_doc
   local IFS
 
   write_error_and_die() {
-     echo -e "\n\t\t$TXT is missing or version -->${tst_version}<-- is too old.
+     echo -e "\n\t\t$TXT version -->${tst_version}<-- is too old.
 		    This script requires ${ref_version} or greater\n"
    # Ask the user instead of bomb, to make happy that packages which version
    # ouput don't follow our expectations
-    echo "If you are sure that you have installed a proper version of ${BOLD}$TXT${OFF}"
+    echo "If you are sure that you have instaled a proper version of ${BOLD}$TXT${OFF}"
     echo "but jhalfs has failed to detect it, press 'c' and 'ENTER' keys to continue,"
     echo -n "otherwise press 'ENTER' key to stop jhalfs.  "
     read ANSWER
@@ -50,173 +49,66 @@ inline_doc
     fi
   }
 
-  echo -ne "${TXT}${spaceSTR:${#TXT}} ${L_arrow}${BOLD}${tst_version}${OFF}${R_arrow}"
+  echo -ne "${TXT}${dotSTR:${#TXT}} ${L_arrow}${BOLD}${tst_version}${OFF}${R_arrow}"
 
-  # Split up w.x.y.z as well as w.x.y-rc  (catch release candidates).
+#  echo -ne "$TXT:\t${L_arrow}${BOLD}${tst_version}${OFF}${R_arrow}"
-  # Also strip trailing "+" which appears for kernel built from a Git
+  IFS=".-(pa"   # Split up w.x.y.z as well as w.x.y-rc  (catch release candidates)
-  # repository where HEAD is not a tag.
+  set -- $ref_version # set postional parameters to minimum ver values
-  IFS=".-(pab+"
-  set -- $ref_version # set positional parameters to minimum ver values
   ref_major=$1; ref_minor=$2; ref_revision=$3
   #
-  set -- $tst_version # Set positional parameters to test version values
+  set -- $tst_version # Set postional parameters to test version values
-  # Values beginning with zero are taken as octal, so that for example
+  major=$1; minor=$2; revision=$3
-  # 2.07.08 gives an error because 08 cannot be octal. The ## stuff supresses
-  # leading zero's
-  major=${1##*(0)}; minor=${2##*(0)}; revision=${3##*(0)}
   #
   # Compare against minimum acceptable version..
-  (( major > ref_major )) &&
+  (( major > ref_major )) && echo " ${spaceSTR:${#tst_version}}${GREEN}OK${OFF}" && return
-    echo " ${spaceSTR1:${#tst_version}}${GREEN}OK${OFF} (Min version: ${ref_version})" &&
-    return
   (( major < ref_major )) && write_error_and_die
     # major=ref_major
   (( minor < ref_minor )) && write_error_and_die
-  (( minor > ref_minor )) &&
+  (( minor > ref_minor )) && echo " ${spaceSTR:${#tst_version}}${GREEN}OK${OFF}" && return
-    echo " ${spaceSTR1:${#tst_version}}${GREEN}OK${OFF} (Min version: ${ref_version})" &&
-    return
     # minor=ref_minor
-  (( revision >= ref_revision )) &&
+  (( revision >= ref_revision )) && echo " ${spaceSTR:${#tst_version}}${GREEN}OK${OFF}" && return
-    echo " ${spaceSTR1:${#tst_version}}${GREEN}OK${OFF} (Min version: ${ref_version})" &&
-    return
 
   # oops.. write error msg and die
   write_error_and_die
 }
+#  local -r PARAM_VALS='${config_param}${dotSTR:${#config_param}} ${L_arrow}${BOLD}${!config_param}${OFF}${R_arrow}'
 
 #----------------------------#
 check_prerequisites() {      #
 #----------------------------#
 
-  HOSTREQS=$(find $BOOK -name hostreqs.xml)
+  # LFS/HLFS/CLFS prerequisites
-
+  check_version "2.6.2"   "`uname -r`"          "KERNEL"
-  eval $(xsltproc $COMMON_DIR/hostreqs.xsl $HOSTREQS)
+  check_version "3.0"     "$BASH_VERSION"       "BASH"
-  # Avoid translation of version strings
+  check_version "3.0.1"   "`gcc -dumpversion`"  "GCC"
-  local LC_ALL=C
+  libcVer="`/lib/libc.so.6 | head -n1`"
-  export LC_ALL
+  libcVer="${libcVer##*version }"
-
+  check_version "2.2.5"   ${libcVer%%,*}        "GLIBC"
-  # LFS prerequisites
+  check_version "2.12"    "$(ld --version  | head -n1 | cut -d" " -f4)"        "BINUTILS"
-  if [ -n "$MIN_Linux_VER" ]; then
+  check_version "1.15"    "$(tar --version | head -n1 | cut -d" " -f4)"        "TAR"
-    check_version "$MIN_Linux_VER"     "`uname -r`"          "KERNEL"
-  fi
-  if [ -n "$MIN_Bash_VER" ]; then
-    check_version "$MIN_Bash_VER"      "$BASH_VERSION"       "BASH"
-  fi
-  if [ ! -z $MIN_GCC_VER ]; then
-    check_version "$MIN_GCC_VER"     "`gcc -dumpfullversion -dumpversion`"  "GCC"
-    check_version "$MIN_GCC_VER"     "`g++ -dumpfullversion -dumpversion`"  "G++"
-  elif [ ! -z $MIN_Gcc_VER ]; then
-    check_version "$MIN_Gcc_VER"     "`gcc -dumpfullversion -dumpversion`"  "GCC"
-  fi
-  if [ -n "$MIN_Glibc_VER" ]; then
-    check_version "$MIN_Glibc_VER"     "$(ldd --version  | head -n1 | awk '{print $NF}')"   "GLIBC"
-  fi
-  if [ -n "$MIN_Binutils_VER" ]; then
-    check_version "$MIN_Binutils_VER"  "$(ld --version  | head -n1 | awk '{print $NF}')"    "BINUTILS"
-  fi
-  if [ -n "$MIN_Tar_VER" ]; then
-    check_version "$MIN_Tar_VER"       "$(tar --version | head -n1 | cut -d" " -f4)"        "TAR"
-  fi
-  if [ -n "$MIN_Bzip2_VER" ]; then
   bzip2Ver="$(bzip2 --version 2>&1 < /dev/null | head -n1 | cut -d" " -f8)"
-    check_version "$MIN_Bzip2_VER"     "${bzip2Ver%%,*}"     "BZIP2"
+  check_version "1.0.2"   "${bzip2Ver%%,*}"                                    "BZIP2"
-  fi
+  check_version "1.875"   "$(bison --version | head -n1 | cut -d" " -f4)"      "BISON"
-  if [ -n "$MIN_Bison_VER" ]; then
+  check_version "5.2.1"   "$(chown --version | head -n1 | cut -d")" -f2)"      "COREUTILS"
-    check_version "$MIN_Bison_VER"     "$(bison --version | head -n1 | cut -d" " -f4)"      "BISON"
+  check_version "2.8"     "$(diff --version  | head -n1 | cut -d" " -f4)"      "DIFF"
-  fi
+  check_version "4.1.20"  "$(find --version  | head -n1 | cut -d" " -f4)"      "FIND"
-  if [ -n "$MIN_Coreutils_VER" ]; then
+  check_version "3.0"     "$(gawk --version  | head -n1 | cut -d" " -f3)"      "GAWK"
-    check_version "$MIN_Coreutils_VER" "$(chown --version | head -n1 | cut -d" " -f4)"      "COREUTILS"
+  check_version "2.5"     "$(grep --version  | head -n1 | awk '{print $NF}')"  "GREP"
-  fi
+  check_version "1.2.4"   "$(gzip --version 2>&1 | head -n1 | cut -d" " -f2)"  "GZIP"
-  if [ -n "$MIN_Diffutils_VER" ]; then
+  check_version "3.79.1"  "$(make --version  | head -n1 | cut -d " " -f3 | cut -c1-4)"  "MAKE"
-    check_version "$MIN_Diffutils_VER" "$(diff --version  | head -n1 | cut -d" " -f4)"      "DIFF"
+  check_version "2.5.4"   "$(patch --version | head -n1 | cut -d" " -f2)"      "PATCH"
-  fi
+  check_version "3.0.2"   "$(sed --version   | head -n1 | cut -d" " -f4)"      "SED"
-  if [ -n "$MIN_Findutils_VER" ]; then
-    check_version "$MIN_Findutils_VER" "$(find --version  | head -n1 | cut -d" " -f4)"      "FIND"
-  fi
-  if [ -n "$MIN_Gawk_VER" ]; then
-    check_version "$MIN_Gawk_VER"      "$(gawk --version  | head -n1 | awk -F'[ ,]+' '{print $3}')" "GAWK"
-  fi
-  if [ -n "$MIN_Grep_VER" ]; then
-    check_version "$MIN_Grep_VER"      "$(grep --version  | head -n1 | awk '{print $NF}')"  "GREP"
-  fi
-  if [ -n "$MIN_Gzip_VER" ]; then
-    check_version "$MIN_Gzip_VER"      "$(gzip --version 2>&1 | head -n1 | cut -d" " -f2)"  "GZIP"
-  fi
-  if [ -n "$MIN_M4_VER" ]; then
-    check_version "$MIN_M4_VER"        "$(m4 --version 2>&1 | head -n1 | awk '{print $NF}')" "M4"
-  fi
-  if [ -n "$MIN_Make_VER" ]; then
-    check_version "$MIN_Make_VER"      "$(make --version  | head -n1 | cut -d " " -f3 | cut -c1-4)" "MAKE"
-  fi
-  if [ -n "$MIN_Patch_VER" ]; then
-    check_version "$MIN_Patch_VER"     "$(patch --version | head -n1 | sed 's/.*patch //')" "PATCH"
-  fi
-  if [ -n "$MIN_Perl_VER" ]; then
-    check_version "$MIN_Perl_VER"      "$(perl -V:version | cut -f2 -d\')"                  "PERL"
-  fi
-  if [ -n "$MIN_Sed_VER" ]; then
-    check_version "$MIN_Sed_VER"       "$(sed --version   | head -n1 | cut -d" " -f4)"      "SED"
-  fi
-  if [ -n "$MIN_Texinfo_VER" ]; then
-    check_version "$MIN_Texinfo_VER"   "$(makeinfo --version | head -n1 | awk '{ print$NF }')" "TEXINFO"
-  fi
-  if [ -n "$MIN_Xz_VER" ]; then
-    check_version "$MIN_Xz_VER"        "$(xz --version | head -n1 | cut -d" " -f4)"         "XZ"
-  fi
-  if [ -n "$MIN_Python_VER" ]; then
-    check_version "$MIN_Python_VER"    "3.$(python3 -c"import sys; print(sys.version_info.minor,'.',sys.version_info.micro,sep='')")" "PYTHON"
-  fi
-}
-
-#----------------------------#
-check_alfs_tools() {         #
-#----------------------------#
-: << inline_doc
-Those tools are needed for the proper operation of jhalfs
-inline_doc
-
-  # Avoid translation of version strings
-  local LC_ALL=C
-  export LC_ALL
 
   # Check for minimum sudo version
   SUDO_LOC="$(whereis -b sudo | cut -d" " -f2)"
   if [ -x $SUDO_LOC ]; then
     sudoVer="$(sudo -V | head -n1 | cut -d" " -f3)"
-    check_version "1.7.0"  "${sudoVer}"      "SUDO"
+    check_version "1.6.8"  "${sudoVer}"      "SUDO"
   else
     echo "${nl_}\"${RED}sudo${OFF}\" ${BOLD}must be installed on your system for jhalfs to run"
     exit 1
   fi
 
-  # Check for wget presence (using a dummy version)
-  WGET_LOC="$(whereis -b wget | cut -d" " -f2)"
-  if [ -x $WGET_LOC ]; then
-    wgetVer="$(wget --version | head -n1 | cut -d" " -f3)"
-    if echo "$wgetVer" | grep -q '^[[:digit:]]'; then
-      check_version "1.0.0"  "${wgetVer}"      "WGET"
-    else echo Wget detected, but no version found. Continuing anyway.
-    fi
-  else
-    echo "${nl_}\"${RED}wget${OFF}\" ${BOLD}must be installed on your system for jhalfs to run"
-    exit 1
-  fi
-
-  # Before checking libxml2 and libxslt version information, ensure tools
-  # needed from those packages are actually available. Avoids a small
-  # cosmetic bug of book version information not being retrieved if
-  # xmllint is unavailable, especially when on recent non-LFS hosts.
-
-  XMLLINT_LOC="$(whereis -b xmllint | cut -d" " -f2)"
-  XSLTPROC_LOC="$(whereis -b xsltproc | cut -d" " -f2)"
-
-  if [ ! -x $XMLLINT_LOC ]; then
-    echo "${nl_}\"${RED}xmllint${OFF}\" ${BOLD}must be installed on your system for jhalfs to run"
-    exit 1
-  fi
-
-  if [ -x $XSLTPROC_LOC ]; then
-
   # Check for minimum libxml2 and libxslt versions
   xsltprocVer=$(xsltproc -V | head -n1 )
   libxmlVer=$(echo $xsltprocVer | cut -d " " -f3)
@@ -226,16 +118,18 @@ inline_doc
   check_version "2.06.20"  "${libxmlVer:0:1}.${libxmlVer:1:2}.${libxmlVer:3:2}"     "LIBXML2"
   check_version "1.01.14"  "${libxsltVer:0:1}.${libxsltVer:1:2}.${libxsltVer:3:2}"  "LIBXSLT"
 
-  else
+  # The next versions checks are required only when BLFS_TOOL is set and
-    echo "${nl_}\"${RED}xsltproc${OFF}\" ${BOLD}must be installed on your system for jhalfs to run"
+  # this dependencies has not be selected for installation
-    exit 1
+  if [[ "$BLFS_TOOL" = "y" ]] ; then
+
+    if [[ -z "$DEP_TIDY" ]] ; then
+      tidyVer=$(tidy -V | cut -d " " -f9)
+      check_version "2004" "${tidyVer}" "TIDY"
     fi
 
-  # Now that we do profiling, we need the docbook DTD, and the docbook XSL
+    # Check if the proper DocBook-XML-DTD and DocBook-XSL are correctly installed
-  # stylesheets.
+XML_FILE="<?xml version='1.0' encoding='ISO-8859-1'?>
-  # Minimal docbook-xml code for testing
+<?xml-stylesheet type='text/xsl' href='http://docbook.sourceforge.net/release/xsl/1.69.1/xhtml/docbook.xsl'?>
-  XML_FILE="<?xml version='1.0' encoding='ISO-8859-1'?>
-<?xml-stylesheet type='text/xsl' href='http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl'?>
 <!DOCTYPE article PUBLIC '-//OASIS//DTD DocBook XML V4.5//EN'
   'http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd'>
 <article>
@@ -246,17 +140,24 @@ inline_doc
   </sect1>
 </article>"
 
-  if echo $XML_FILE | xmllint -nonet -noout -postvalid - 2>/dev/null ; then
+    if [[ -z "$DEP_DBXML" ]] ; then
+      if `echo $XML_FILE | xmllint -noout -postvalid - 2>/dev/null` ; then
         check_version "4.5" "4.5" "DocBook XML DTD"
       else
-    echo "Error: you need the Docbook XML DTD for running jhalfs"
+        echo "Warning: not found a working DocBook XML DTD 4.5 installation"
-    exit 1
+        exit 2
+      fi
     fi
 
-  if echo $XML_FILE | xsltproc -nonet -noout - 2>/dev/null ; then
+#     if [[ -z "$DEP_DBXSL" ]] ; then
-    check_version "current" "current" "DocBook XSL stylesheets"
+#       if `echo $XML_FILE | xsltproc --noout - 2>/dev/null` ; then
-  else
+#         check_version "1.69.1" "1.69.1" "DocBook XSL"
-    echo "Error: you need the Docbook XSL stylesheets for running jhalfs"
+#       else
-    exit 1
+#         echo "Warning: not found a working DocBook XSL 1.69.1 installation"
-  fi
+#         exit 2
+#       fi
+#     fi
+
+  fi # end BLFS_TOOL=Y
+
 }

common/libs/func_compare.sh

@@ -1,3 +1,5 @@
+# $Id$
+
 #----------------------------------#
 wrt_compare_targets() {            #
 #----------------------------------#
@@ -6,9 +8,8 @@ wrt_compare_targets() {            #
                                           # and "ITERATIONS" with no "$".
     ITERATION=iteration-$N
     if [ "$N" != "1" ] ; then
-      wrt_system_build "$1" "$N" "$PREV_IT"
+      wrt_system_build "$N" "$PREV_IT"
     fi
-    # add needed Makefile target
     this_script=$ITERATION
     CHROOT_wrt_target "$ITERATION" "$PREV"
     wrt_compare_work "$ITERATION" "$PREV_IT"
@@ -17,33 +18,32 @@ wrt_compare_targets() {            #
     PREV_IT=$ITERATION
     PREV=$ITERATION
   done
-  # We need to prevent "userdel" in all iterations but the last
-  # We need to access the scriptlets in "dir"
-  local dir
-  printf -v dir chapter%02d "$1"
-
-  REVISED=cleanup
-  if ls $dir/*revised* 2>/dev/null; then REVISED=revised; fi
-  sed -i '/userdel/d' $dir/*$REVISED*
-  for (( N = 2; N < ITERATIONS; N++ )); do
-     sed -i '/userdel/d' $dir-build_$N/*$REVISED*
-  done
-
 }
 
 #----------------------------------#
 wrt_system_build() {               #
 #----------------------------------#
-  local    CHAP=$1
+  local     RUN=$1
-  local     RUN=$2
+  local PREV_IT=$2
-  local PREV_IT=$3
 
-  chapter_targets $CHAP $RUN
+  if [[ "$PROGNAME" = "clfs" ]] ; then
+    final_system_Makefiles $RUN
+  else
+    chapter6_Makefiles $RUN
+  fi
 
-  CHROOT_TGT="$CHROOT_TGT $PREV_IT $system_build"
+  if [[ "$PROGNAME" = "clfs" ]] ; then
+    basicsystem="$basicsystem $PREV_IT $system_build"
+  else
+    chapter6="$chapter6 $PREV_IT $system_build"
+  fi
 
   if [[ "$RUN" = "$ITERATIONS" ]] ; then
-      CHROOT_TGT="$CHROOT_TGT iteration-$RUN"
+    if [[ "$PROGNAME" = "clfs" ]] ; then
+      basicsystem="$basicsystem iteration-$RUN"
+    else
+      chapter6="$chapter6 iteration-$RUN"
+    fi
   fi
 }
 
@@ -53,32 +53,55 @@ wrt_compare_work() {               #
   local ITERATION=$1
   local   PREV_IT=$2
   local PRUNEPATH="/dev /home /${SCRIPT_ROOT} /lost+found /media /mnt /opt /proc \
-/sources /root /run /srv /sys /tmp /tools /usr/local /usr/src /var"
+/sources /root /srv /sys /tmp /tools /usr/local /usr/src"
 
   local    ROOT_DIR=/
   local DEST_TOPDIR=/${SCRIPT_ROOT}
-  local   ICALOGDIR=/${SCRIPT_ROOT}/logs/ICA
+  local   ICALOGDIR=/${SCRIPT_ROOT}/${LOGDIRBASE}/ICA
+  local FARCELOGDIR=/${SCRIPT_ROOT}/${LOGDIRBASE}/farce
 
   if [[ "$RUN_ICA" = "y" ]] ; then
     local DEST_ICA=$DEST_TOPDIR/ICA && \
-  # the PRUNEPATH additional setting is to avoid .pyc files to show up in diff
 (
     cat << EOF
-	@PRUNEPATH="$PRUNEPATH \$\$(find /usr/lib -name __pycache__)"; \\
+	@extras/do_copy_files "$PRUNEPATH" $ROOT_DIR $DEST_ICA/$ITERATION >> ${LOGDIRBASE}/\$@ 2>&1 && \\
-	extras/do_copy_files "\$\$PRUNEPATH" $ROOT_DIR $DEST_ICA/$ITERATION >>logs/\$@ 2>&1 && \\
+	extras/do_ica_prep $DEST_ICA/$ITERATION >> ${LOGDIRBASE}/\$@ 2>&1
-	extras/do_ica_prep $DEST_ICA/$ITERATION >>logs/\$@ 2>&1
 EOF
 ) >> $MKFILE.tmp
     if [[ "$ITERATION" != "iteration-1" ]] ; then
       wrt_do_ica_work "$PREV_IT" "$ITERATION" "$DEST_ICA"
     fi
   fi
+
+  if [[ "$RUN_FARCE" = "y" ]] ; then
+    local DEST_FARCE=$DEST_TOPDIR/farce && \
+(
+    cat << EOF
+	@extras/do_copy_files "$PRUNEPATH" $ROOT_DIR $DEST_FARCE/$ITERATION >> ${LOGDIRBASE}/\$@ 2>&1 && \\
+	extras/filelist $DEST_FARCE/$ITERATION $DEST_FARCE/filelist-$ITERATION >> ${LOGDIRBASE}/\$@ 2>&1
+EOF
+) >> $MKFILE.tmp
+    if [[ "$ITERATION" != "iteration-1" ]] ; then
+      wrt_do_farce_work "$PREV_IT" "$ITERATION" "$DEST_FARCE"
+    fi
+  fi
 }
 
 #----------------------------------#
 wrt_do_ica_work() {                #
 #----------------------------------#
-  echo -e "\t@extras/do_ica_work $1 $2 $ICALOGDIR $3 >>logs/\$@ 2>&1" >> $MKFILE.tmp
+  echo -e "\t@extras/do_ica_work $1 $2 $ICALOGDIR $3 >> ${LOGDIRBASE}/\$@ 2>&1" >> $MKFILE.tmp
+}
+
+#----------------------------------#
+wrt_do_farce_work() {              #
+#----------------------------------#
+  local OUTPUT=$FARCELOGDIR/${1}_V_${2}
+  local PREDIR=$3/$1
+  local PREFILE=$3/filelist-$1
+  local ITEDIR=$3/$2
+  local ITEFILE=$3/filelist-$2
+  echo -e "\t@extras/farce --directory $OUTPUT $PREDIR $PREFILE $ITEDIR $ITEFILE >> ${LOGDIRBASE}/\$@ 2>&1" >> $MKFILE.tmp
 }
 
 #----------------------------------#
@@ -86,31 +109,24 @@ wrt_logs() {                       #
 #----------------------------------#
   local build=build_$1
   local file
+  local ch_order=${PREV%%_*}
 
+  echo -e "\t@cd /\$(SCRIPT_ROOT)/${LOGDIRBASE} && mkdir $build && mv -f ${ch_order}_* $build" >> $MKFILE.tmp
+
+  if [ ! "${1}" = "1" ] ; then
 (
     cat << EOF
-	@cd logs && \\
+	@cd $build && \\
-	mkdir $build && \\
-	mv -f `echo ${system_build} | sed 's/ /* /g'`* $build && \\
-	if [ ! $build = build_1 ] ; then \\
-	  cd $build && \\
 	for file in \`ls .\` ; do \\
 	  mv -f \$\$file \`echo \$\$file | sed -e 's,-$build,,'\` ; \\
-	  done ; \\
+	done ;
-	fi
-	@cd /\$(SCRIPT_ROOT)
-	@if [ -d test-logs ] ; then \\
-	  cd test-logs && \\
-	  mkdir $build && \\
-	  mv -f `echo ${system_build} | sed 's/ /* /g'`* $build && \\
-	  if [ ! $build = build_1 ] ; then \\
-	    cd $build && \\
-	    for file in \`ls .\` ; do \\
-	      mv -f \$\$file \`echo \$\$file | sed -e 's,-$build,,'\` ; \\
-	    done ; \\
-	  fi ; \\
-	  cd /\$(SCRIPT_ROOT) ; \\
-	fi ;
 EOF
 ) >> $MKFILE.tmp
+  fi
+
+  if [ ${CONFIG_TESTS} = "y" ] ; then
+    echo -e "\t@cd /\$(SCRIPT_ROOT)/${TESTLOGDIRBASE} && mkdir $build && mv -f ${ch_order}_* $build" >> $MKFILE.tmp
+  fi
+
+  echo -e "\t@cd /\$(SCRIPT_ROOT)" >> $MKFILE.tmp
 }

common/libs/func_custom_pkgs

@@ -1,96 +1,64 @@
 #!/bin/bash
 
+# $Id$
+
 #----------------------------------#
 wrt_CustomTools_target() {         # Add any users supplied scripts
 #----------------------------------#
   PREV=""
 
-  echo "  Adding custom packages... ${BOLD}START${OFF}"
+  echo "${tab_}${GREEN}Processing... ${L_arrow}CUSTOM_TOOLS ${R_arrow}"
 
-  # Create the custom_tools scripts directory
+  for file in custom-tools/* ; do
-  mkdir -p custom-tools
+    # Keep the script file name
+    this_script=`basename $file`
 
-  for file in $JHALFSDIR/custom-commands/*; do
+    # Grab the phase name to be used with INSTALL_LOG and tracking dir touch
-    if [[ `basename ${file}` = "*" ]]; then
+    name=`grep "^PKG_PHASE=" ${file} | sed -e 's@PKG_PHASE=@@'`
-      break
+    # Grab also the package version
+    pkg_ver=`grep "^VERSION=" ${file} | sed -e 's@VERSION=@@'`
+
+    # Append each name of the script files to a list (this will become
+    # the names of the targets in the Makefile)
+    custom_list="$custom_list ${this_script}"
+
+    #--------------------------------------------------------------------#
+    #         >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<<          #
+    #--------------------------------------------------------------------#
+    #
+    # Drop in the name of the target on a new line, and the previous target
+    # as a dependency. Also call the echo_message function.
+    wrt_target "${this_script}" "$PREV"
+
+    # Touch timestamp file if installed files logs will be created.
+    if [ "$name" != "" ] && [ "${INSTALL_LOG}" = "y" ] ; then
+      wrt_TouchTimestamp
     fi
-    source $file
-    this_script=$(basename ${file})
-    echo "$tab_${GREEN}Adding${OFF} ${this_script}"
 
-      # Create a Makefile entry
+    # Run the script.
-    if [[ "x${PKG}" = "x" ]]; then
+    wrt_RunScript "$file"
-    # Create an entry for a self contained cmd script that does not
-    # reference a package tarball
-      CHROOT_wrt_target "${this_script}" "$PREV"
-      CHROOT_wrt_RunAsRoot "custom-tools/${this_script}"
-      wrt_touch
 
-    # Create the build script file
+    # Write installed files log
-( cat <<- xEOFx
+    if [ "$name" != "" ] && [ "${INSTALL_LOG}" = "y" ] ; then
-#!/bin/bash
+      wrt_LogNewFiles "$name"
-set -e
+    fi
-
-`cat tmp`
-exit
-xEOFx
-) > custom-tools/${this_script}
 
+    # Touch the tracking file.
+    if [ "$PROGNAME" = "clfs2" ]; then
+      echo -e "\t@touch \$(MOUNT_PT)$TRACKING_DIR/${name}-${pkg_ver}" >>  $MKFILE.tmp
     else
-    # Create an entry for package
+      echo -e "\t@touch $TRACKING_DIR/${name}-${pkg_ver}" >>  $MKFILE.tmp
-      CHROOT_wrt_target "${this_script}" "$PREV"
+    fi
-      CHROOT_Unpack "${PKG_FILE}"
+
-      CHROOT_wrt_RunAsRoot "custom-tools/${this_script}"
+    # Include a touch of the target name so make can check
-      CHROOT_wrt_RemoveBuildDirs "${PKG}"
+    # if it's already been made.
-      echo -e "\t@touch $TRACKING_DIR/${PKG}-${PKG_VERSION}" >>  $MKFILE.tmp
     wrt_touch
+    #
+    #--------------------------------------------------------------------#
+    #              >>>>>>>> END OF Makefile ENTRY <<<<<<<<               #
+    #--------------------------------------------------------------------#
 
-    # Create the build script file
+    # Keep the script file name for Makefile dependencies.
-( cat <<- xEOFx
+    PREV=${this_script}
-#!/bin/bash
-set -e
-
-cd \$PKGDIR
-`cat tmp`
-exit
-xEOFx
-) > custom-tools/$this_script
-    fi
-
-    rm -f tmp
-    PREV=$this_script
-    custom_list="${custom_list} ${this_script}"
   done
-
-  # Make the scripts executable.
-  chmod +x custom-tools/*
-
-  echo "  Adding custom packages... ${BOLD}DONE${OFF}"
-}
-
-
-#----------------------------------#
-add_CustomToolsURLS() {            # Add any users supplied scripts URL information
-#----------------------------------#
-  local this_script
-  local URL PKG PKG_VERSION PKG_FILE MD5
-
-  > urls.lst.tmp
-  for this_script in $JHALFSDIR/custom-commands/*; do
-    if [[ `basename ${this_script}` = "*" ]]; then
-      CUSTOM_TOOLS="n"
-      break
-    fi
-    source $this_script
-      # A cmd only script had no PKG defined
-    [[ "x${PKG}" = "x" ]] && continue
-
-    echo "${URL} ${MD5}" >> urls.lst.tmp
-     # Add any patches..
-    for PATCH in PATCH{1..10}; do
-      [[ -n ${!PATCH} ]] && echo "${!PATCH} CUSTOM-PATCH-MD5SUM" >> urls.lst.tmp
-    done
-  done
-  cat  urls.lst.tmp >> $BUILDDIR/sources/urls.lst
-  rm urls.lst.tmp
 }

common/libs/func_download_pkgs

@@ -1,20 +1,16 @@
 #!/bin/bash
 
+# $Id$
+
+
 #----------------------------#
 get_sources() {              # Download file, write name to MISSING_FILES.DMP if an error
 #----------------------------#
+  local saveIFS=$IFS
+  local IFS line URL1 URL2 FILE BOOKMD5 MD5 HAVEMD5 fromARCHIVE
 
     # Test if the packages must be downloaded
-  [ "$GETPKG" = y ] || return 0
+  [ ! "$GETPKG" = "y" ] && return
-
-  local URL FILE BOOKMD5 MD5 HAVEMD5 fromARCHIVE WGETPARAM MAYBEMORE
-
-  WGETPARAM=""
-  if [[ "${RETRYSRCDOWNLOAD}" = "y" ]] ; then
-    WGETPARAM+="--retry-connrefused"
-  fi
-  WGETPARAM+=" --tries ${RETRYDOWNLOADCNT}"
-  WGETPARAM+=" --timeout ${DOWNLOADTIMEOUT}"
 
   gs_wrt_message(){
     echo "${RED}$1${OFF}"
@@ -23,67 +19,73 @@ get_sources() {              # Download file, write name to MISSING_FILES.DMP if
     # Housekeeping
   [[ ! -d $BUILDDIR/sources ]] && mkdir $BUILDDIR/sources
   cd $BUILDDIR/sources
+  [[ -f MD5SUMS ]] && rm MD5SUMS
+  [[ -f MISSING_FILES.DMP ]] && rm MISSING_FILES.DMP
+  [[ -f urls.lst ]] && rm urls.lst
 
     # Generate URLs file
   create_urls
 
-    # Clean up leftovers from preceding attempts
+  IFS=$'\x0A'  # Modify the 'internal field separator' to break on 'LF' only
-  >MISSING_FILES.DMP
+  for line in `cat urls.lst`; do
+    IFS=$saveIFS  # Restore the system defaults
 
-    # Normally, urls.lst contains lines with two fields:
+      # Skip some packages if they aren't needed
-    # <package url> <book md5>, but
+    case $line in
-    # if a custom patch has an md5, there is a third field
+        */tcl* | */expect* | */dejagnu* | */tree* | */gcc-testsuite* )
-    # on the line, due to the way add_CustomToolsURLS works.
+            [[ "$TEST" = "0" ]] && continue
-  cat urls.lst | while read URL BOOKMD5 MAYBEMORE; do
+          ;;
-    FILE=$(basename "$URL") # File name
+        */vim-*-lang* )
+            [[ "$VIMLANG" = "0" ]] && continue
+          ;;
+        *linux/linux-* )
+            [[ -z "$CONFIG" ]] && [[ -z "$BOOT_CONFIG" ]] && \
+            [[ "$GETKERNEL" = "n" ]] && continue
+          ;;
+    esac
+
+      # Locations
+    URL1=`echo $line | cut -d" " -f2` # Preferred URL
+    URL2=`echo $line | cut -d" " -f1` # Fallback Upstream URL
+    FILE=`basename $URL1` # File name
+    BOOKMD5=`echo $line | cut -d" " -f3` # MD5 book value
 
       # Validation pair
     MD5="$BOOKMD5  $FILE"
     HAVEMD5=1
 
     set -e
-      # If the file exists in the archive, copy it to the
+      # If the file exists in the archive copy it to the
       # $BUILDDIR/sources dir. MD5SUM will be validated later.
-    if [ -n "${SRC_ARCHIVE}" ] &&
+    if [ ! -z ${SRC_ARCHIVE} ] &&
-       [ -d "${SRC_ARCHIVE}" ] &&
+       [   -d ${SRC_ARCHIVE} ] &&
-       [ -f "${SRC_ARCHIVE}/$FILE" ]; then
+       [   -f ${SRC_ARCHIVE}/$FILE ]; then
-      cp "${SRC_ARCHIVE}/$FILE" .
+      cp ${SRC_ARCHIVE}/$FILE .
       echo "$FILE: -- copied from $SRC_ARCHIVE"
       fromARCHIVE=1
     else
+      echo "${BOLD}${YELLOW}$FILE: not found in ${SRC_ARCHIVE}${OFF}"
       fromARCHIVE=0
-      # If the file does not exist yet in /sources, download a fresh one
+      # If the file does not exist yet in /sources download a fresh one
-      if [ ! -f "$FILE" ] ; then
+      if [ ! -f $FILE ] ; then
-	if [ -n "$SRC_ARCHIVE" ] ; then
+        if ! wget $URL1 && ! wget $URL2 ; then
-	  echo "${BOLD}${YELLOW}$FILE: not found in ${SRC_ARCHIVE} nor in ${BUILDDIR}/sources${OFF}"
+          gs_wrt_message "$FILE not found in the SRC_ARCHIVE or on any server..SKIPPING"
-	else
-	  echo "${BOLD}${YELLOW}$FILE: not found in ${BUILDDIR}/sources${OFF}"
-	fi
-        if ! wget "$URL" $WGETPARAM; then
-          gs_wrt_message "$FILE not found on any server..SKIPPING"
           continue
         fi
-      else
-	  echo "${BOLD}${YELLOW}$FILE: using cached file in ${BUILDDIR}/sources${OFF}"
       fi
     fi
 
-    # Deal with bootscripts md5sum issue,
+      # IF the md5sum does not match the existing files
-    # or skip if it is a custom patch without md5
-    [ $BOOKMD5 = "BOOTSCRIPTS-MD5SUM"  ] && continue
-    [ $BOOKMD5 = "CUSTOM-PATCH-MD5SUM" ] && continue
-
-      # IF the md5sum does not match
     if ! echo "$MD5" | md5sum -c - >/dev/null ; then
-      [ "$fromARCHIVE" = 1 ] && echo "${BOLD}${YELLOW}MD5SUM did not match $SRC_ARCHIVE copy${OFF}"
+      [[ $fromARCHIVE = "1" ]] && echo "${BOLD}${YELLOW}MD5SUM did not match SRC_ARCHIVE copy${OFF}"
-      [ "$fromARCHIVE" = 0 ] && echo "${BOLD}${YELLOW}MD5SUM did not match REMOTE copy${OFF}"
+      [[ $fromARCHIVE = "0" ]] && echo "${BOLD}${YELLOW}MD5SUM did not match REMOTE copy${OFF}"
         # Remove the old file and download a new one
-      rm -fv "$FILE"
+      rm -fv $FILE
         # Force storage in SRC_ARCHIVE
       fromARCHIVE=0;
-        # Try to retrieve again the file.
+        # Try to retrieve again the file. Servers in reverse order.
-      if ! wget "$URL" $WGETPARAM; then
+      if ! wget $URL2 && ! wget $URL1 ; then
-        gs_wrt_message "$FILE not found on the server... SKIPPING"
+        gs_wrt_message "$FILE not found on the servers.. SKIPPING"
         continue
       fi
     fi
@@ -96,7 +98,7 @@ get_sources() {              # Download file, write name to MISSING_FILES.DMP if
     fi
 
       # Generate a fresh MD5SUM for this file
-    if [ "$HAVEMD5" = "0" ] ; then
+    if [[ "$HAVEMD5" = "0" ]] ; then
       echo "${BOLD}${YELLOW}Generating a new MD5SUM for ${OFF}$FILE"
       echo "NEW MD5SUM: $(md5sum $FILE)" >> MISSING_FILES.DMP
     fi
@@ -106,13 +108,12 @@ get_sources() {              # Download file, write name to MISSING_FILES.DMP if
 
      # Copy the freshly downloaded file
      # to the source archive.
-   if [ -n "${SRC_ARCHIVE}"  ] &&
+   if [ ! -z ${SRC_ARCHIVE}  ] &&
-      [ -d "${SRC_ARCHIVE}"  ] &&
+      [   -d ${SRC_ARCHIVE}  ] &&
-      [ -w "${SRC_ARCHIVE}"  ] &&
+      [   -w ${SRC_ARCHIVE}  ] &&
-      [ ! -f "${SRC_ARCHIVE}/$FILE" ] &&
+      [ "$fromARCHIVE" = "0" ] ; then
-      [ "$fromARCHIVE" = 0 ] ; then
         echo "Storing file:<$FILE> in the package archive"
-        cp -f "$FILE" "${SRC_ARCHIVE}"
+        cp -f $FILE ${SRC_ARCHIVE}
    fi
 
   done
@@ -130,20 +131,90 @@ create_urls() {              #
 #----------------------------#
   cd $JHALFSDIR
 
-  echo -n "Creating URLs file... "
+  case ${PROGNAME} in
+    clfs)
+        echo -n "Creating CLFS <${ARCH}> specific URLs file"
         xsltproc --nonet --xinclude \
-           --stringparam pkgmngt "$PKGMNGT"  \
+                 --stringparam server $SERVER \
-           --stringparam revision "$INITSYS" \
+                 --stringparam family clfs \
-           --output ../sources/urls.lst      \
+                 -o $BUILDDIR/sources/urls.lst $CODE_DIR/XSL/urls.xsl \
-           urls.xsl                          \
+                 $BOOK/materials/$ARCH-chapter.xml >>$LOGDIR/$LOG 2>&1
+      ;;
+    clfs2)
+        echo -n "Creating CLFS2 <${ARCH}> specific URLs file"
+        xsltproc --nonet --xinclude \
+                 --stringparam server $SERVER \
+                 --stringparam family clfs \
+                 -o $BUILDDIR/sources/urls.lst $CODE_DIR/XSL/urls.xsl \
+                 $BOOK/materials/$ARCH-chapter.xml >>$LOGDIR/$LOG 2>&1
+      ;;
+    clfs3)
+        echo -n "Creating CLFS3 <${ARCH}> specific URLs file"
+        xsltproc --nonet --xinclude \
+                 --stringparam server $SERVER \
+                 --stringparam family clfs \
+                 -o $BUILDDIR/sources/urls.lst $CODE_DIR/XSL/urls.xsl \
+                 $BOOK/materials/$ARCH-chapter.xml >>$LOGDIR/$LOG 2>&1
+      ;;
+    hlfs)
+        echo -n "Creating HLFS <${MODEL}> + <${KERNEL}> specific URLs file"
+        xsltproc --nonet --xinclude \
+                 --stringparam server $SERVER \
+                 --stringparam family lfs \
+                 --stringparam model $MODEL \
+                 --stringparam kernel $KERNEL \
+                 -o $BUILDDIR/sources/urls.lst $CODE_DIR/XSL/urls.xsl \
+                 $BOOK/chapter04/chapter04.xml >>$LOGDIR/$LOG 2>&1
+      ;;
+    lfs)
+        echo -n "Creating LFS specific URLs file"
+        xsltproc --nonet --xinclude \
+                 --stringparam server $SERVER \
+                 --stringparam family lfs \
+                 -o ../sources/urls.lst $CODE_DIR/XSL/urls.xsl \
                  $BOOK/chapter03/chapter03.xml >>$LOGDIR/$LOG 2>&1
-  echo "OK"
+      ;;
+  esac
+
+  add_extra_urls
+
+  echo " ...OK"
 
   cd $BUILDDIR/sources
 
-  if [[ "${CUSTOM_TOOLS}" = "y" ]]; then
-    add_CustomToolsURLS
-  fi
-
 }
 
+#----------------------------# Add download URLs found in user added scripts,
+add_extra_urls() {           # blfs-tool-deps scripts, and custom-tools scripts
+#----------------------------#
+  local saveIFS=$IFS
+  local IFS file line package tarball download md5sum patchurl patchname patchmd5
+
+  local BLFS_SERVER="${SERVER}/pub/blfs/conglomeration/"
+
+  for file in ${PROGNAME}-commands/*/* ; do
+    # Grab the package name, tarball, download URL and MD5SUM
+    package=`grep "^PACKAGE=" ${file} | sed -e 's@PACKAGE=@@'`
+    tarball=`grep "^TARBALL=" ${file} | sed -e 's@TARBALL=@@'`
+    download=`grep "^DOWNLOAD=" ${file} | sed -e 's@DOWNLOAD=@@'`
+    md5sum=`grep "^MD5SUM=" ${file} | sed -e 's@MD5SUM=@@'`
+
+    # Be sure that we have a download URL and MD5SUM value
+    if [ -n "${download}" ] && [ -n "${md5sum}" ] ; then
+      # Write the package entry
+      echo "${download} ${BLFS_SERVER}${package}/${tarball} ${md5sum}" >> ../sources/urls.lst
+    fi
+
+    # Handle the patches, if any
+    IFS=$'\x0A'
+    for line in `grep "^PATCH=" ${file}` ; do
+      IFS=$saveIFS
+      patchurl=`echo ${line} | sed -e 's@PATCH="@@' -e 's@ .*@@'`
+      patchname=${patchurl##*/}
+      patchmd5=`echo ${line} | sed -e 's@.* @@' -e 's@"@@'`
+
+      # Write the patch entry
+      echo "${patchurl} ${BLFS_SERVER}${package}/${patchname} ${patchmd5}" >> ../sources/urls.lst
+    done
+  done
+}

common/libs/func_install_blfs

@@ -1,271 +0,0 @@
-#!/bin/bash
-
-#----------------------------# Prepare BLFS_ROOT and extract
-install_blfs_tools() {       # the scriptlets to build
-#----------------------------# the dependency tools
-set -e
-# Install the files
-[[ ! -d "${BUILDDIR}${BLFS_ROOT}" ]] && {
-    sudo mkdir -pv "${BUILDDIR}${BLFS_ROOT}"
-    sudo chown "$USER" "${BUILDDIR}${BLFS_ROOT}"
-}
-cp -r BLFS/* ${BUILDDIR}${BLFS_ROOT}
-cp -r menu ${BUILDDIR}${BLFS_ROOT}
-cp $COMMON_DIR/progress_bar.sh ${BUILDDIR}${BLFS_ROOT}
-cp README.BLFS ${BUILDDIR}${BLFS_ROOT}
-if [ "$WRAP_INSTALL" = y ]; then
-  sed -e 's/PKGDIR/JH_UNPACKDIR/' \
-      -e 's/PKG_DEST/JH_PKG_DIR/' \
-      $PKGMNGTDIR/packInstall.sh > ${BUILDDIR}${BLFS_ROOT}/packInstall.sh
-fi
-
-# Set some harcoded envars to their proper values
-sed -i s@tracking-dir@$TRACKING_DIR@ \
-    ${BUILDDIR}${BLFS_ROOT}/{Makefile,gen-makefile.sh,gen_pkg_book.sh}
-
-# If we have a working copy, copy it:
-if [[ "$BLFS_WORKING_COPY" = "y" ]]; then
-echo "copying the local BLFS working copy (may take some time)"
-# -r: recursive; -u: only if newer; -T: otherwise, would copy to a subdirectory
-# of blfs-xml, if blfs-xml already exists; --preserve=timestamps: if the local
-# book has already been validated, tmp is posterior to the others, and
-# validation will not be done again.
-# sudo is needed because make (below) may already have been run and
-# may have put some files owned by root
-  sudo cp -ruT --preserve=timestamps $BLFS_WC_LOCATION \
-                                ${BUILDDIR}${BLFS_ROOT}/$BLFS_XML
-fi
-
-# Copy the LFS book. Note that now, the book is downloaded before running
-# the BLFS tools.
-sudo cp -ruT --preserve=timestamps $BOOK \
-                              ${BUILDDIR}${BLFS_ROOT}/$LFS_XML
-
-# Downloads the book if necessary, initialize the tracking file and the
-# package database.
-# updating first is needed if the xml sources have already been cloned
-# and we want to set the branches.
-# Note that if LFS-BRANCH or BLFS-BRANCH is empty, which may happen
-# if using a working copy, then the corresponding update is not
-# performed by make (see BLFS/Makefile).
-# sudo is needed if $BUILDDIR/var/lib is owned by root and /var/lib/jhalfs
-# has to be created
-sudo make -j1 -C $BUILDDIR$BLFS_ROOT             \
-          REV=$INITSYS                           \
-          LFS-BRANCH=${COMMIT}                   \
-          BLFS-BRANCH=${BLFS_COMMIT}             \
-          update
-sudo make -j1 -C $BUILDDIR$BLFS_ROOT             \
-          REV=$INITSYS                           \
-          TRACKING_DIR=$BUILDDIR$TRACKING_DIR    \
-          LFS_XML=$BUILDDIR$BLFS_ROOT/$LFS_XML   \
-          LFS-BRANCH="${COMMIT}"                 \
-          BLFS_XML=$BUILDDIR$BLFS_ROOT/$BLFS_XML \
-          BLFS-BRANCH=${BLFS_COMMIT}             \
-          $BUILDDIR$BLFS_ROOT/packages.xml
-
-# But then $BUILDDIR/var/lib/ is owned by root if just created, which
-# prevents $LUSER to create "nss_db". The problem is that $LUSER
-# May not have been created yet. So do not change ownership here
-# and do it in master.sh for chapter 4.
-#sudo chown $LUSER:$LGROUP $BUILDDIR/var/lib
-
-# Because the BLFS Makefile is supposed to be used in chroot (or booted)
-# mode, the tracking file has wrong path for DTD. Change it:
-sudo sed -i s@$BUILDDIR@@ $BUILDDIR$TRACKING_DIR/instpkg.xml
-
-# Manually build a 'configuration' file
-if [ "$DEP_LIBXML" = y ]; then
-  LINE_LIBXML='CONFIG_libxml2=y'
-else
-  LINE_LIBXML='#CONFIG_libxml2 is not set'
-fi
-if [ "$DEP_LIBXSLT" = y ]; then
-  LINE_LIBXSLT='CONFIG_libxslt=y'
-else
-  LINE_LIBXSLT='#CONFIG_libxslt is not set'
-fi
-# DocBook is a rec dep of libxslt
-# if [ "$DEP_DBXML" = y ]; then
-#   LINE_DBXML='CONFIG_DocBook=y'
-# else
-#   LINE_DBXML='#CONFIG_DocBook is not set'
-# fi
-if [ "$DEP_LYNX" = y ]; then
-  LINE_LYNX='CONFIG_lynx=y'
-else
-  LINE_LYNX='#CONFIG_lynx is not set'
-fi
-if [ "$DEP_SUDO" = y ]; then
-  LINE_SUDO='CONFIG_sudo=y'
-else
-  LINE_SUDO='#CONFIG_sudo is not set'
-fi
-if [ "$DEP_WGET" = y ]; then
-  LINE_WGET='CONFIG_wget=y'
-else
-  LINE_WGET='#CONFIG_wget is not set'
-fi
-if [ "$DEP_GPM" = y ]; then
-  LINE_GPM='CONFIG_gpm=y'
-else
-  LINE_GPM='#CONFIG_gpm is not set'
-fi
-if [ "$DEP_GIT" = y ]; then
-  LINE_GIT='CONFIG_git=y'
-else
-  LINE_GIT='#CONFIG_git is not set'
-fi
-
-cat >$BUILDDIR$BLFS_ROOT/configuration <<EOF
-$LINE_LIBXML
-$LINE_LIBXSLT
-$LINE_WGET
-$LINE_GIT
-$LINE_GPM
-$LINE_LYNX
-$LINE_SUDO
-MAIL_SERVER=sendmail
-optDependency=2
-SUDO=n
-LANGUAGE=$LANG
-WRAP_INSTALL=$WRAP_INSTALL
-PACK_INSTALL=/blfs_root/packInstall.sh
-DEL_LA_FILES=$DEL_LA_FILES
-STATS=n
-SRC_ARCHIVE=/sources
-BUILD_ROOT=/sources
-BUILD_SUBDIRS=y
-JOBS=$(if [ "$ALL_CORES" = y ]; then echo 0; else echo $N_PARALLEL; fi)
-EOF
-# The 0 value above is for using all cores
-for OPT_VAR in CFLAGS CXXFLAGS LDFLAGS; do
-  eval optVal=\$${OPT_VAR}_$DEF_OPT_MODE
-  if [ -n "$optVal" ] && [ "$optVal" != unset ]; then
-    echo "CFG_$OPT_VAR"=\"$optVal\" >> $BUILDDIR$BLFS_ROOT/configuration
-  else
-    echo "CFG_$OPT_VAR"=EMPTY >> $BUILDDIR$BLFS_ROOT/configuration
-  fi
-done
-
-# Generates the scripts for the blfs tools dependencies (in ./scripts)
-yes "yes" | $BUILDDIR$BLFS_ROOT/gen_pkg_book.sh        \
-                    $BUILDDIR$TRACKING_DIR/instpkg.xml \
-                    $BUILDDIR$BLFS_ROOT
-
-# Move the scriptlets where they should be
-sudo rm -rf $BUILDDIR$BLFS_ROOT/scripts
-mv scripts $BUILDDIR$BLFS_ROOT
-
-# Generates a list containing download and copying instructions for tarballs
-echo -e '#!/bin/bash\nset -e\n' > $BUILDDIR$BLFS_ROOT/download_script
-sed -n -e '/PACKAGE=/,/^fi/{/^fi/a\
-[ ! -f "$JH_SRC_ARCHIVE/$PACKAGE" ] && cp $PACKAGE $JH_SRC_ARCHIVE
-p}' \
-       -e '/|[ ]*md5sum/p' \
-       -e '/PACKAGE1=/,/^fi/{/^fi/a\
-[ ! -f "$JH_SRC_ARCHIVE/$PACKAGE1" ] && cp $PACKAGE1 $JH_SRC_ARCHIVE
-p}' \
-       -e '/PATCH=/,/^fi/{/^fi/a\
-[ ! -f "$JH_SRC_ARCHIVE/$PATCH" ] && cp $PATCH $JH_SRC_ARCHIVE
-p}' \
-       -e '/URL=/,/^fi/{/^fi/a\
-[ ! -f "$JH_SRC_ARCHIVE/$BOOTPACKG" ] && cp $BOOTPACKG $JH_SRC_ARCHIVE
-p}' \
-    $BUILDDIR$BLFS_ROOT/scripts/* >> $BUILDDIR$BLFS_ROOT/download_script
-chmod u+x $BUILDDIR$BLFS_ROOT/download_script
-
-# Downloads (or copy) to build_dir/sources
-pushd $BUILDDIR/sources
-# Remove `unpacked' files if some have been left
-sudo find . -name unpacked -exec rm \{\} \;
-if [ "$GETPKG" = "y" ]; then
-    JH_SRC_ARCHIVE=${SRC_ARCHIVE:-/dev/null}     \
-    $BUILDDIR$BLFS_ROOT/download_script
-else # Save the download script in case the user wants to run it later
-    cp $BUILDDIR$BLFS_ROOT/download_script .
-fi
-popd
-rm -v $BUILDDIR$BLFS_ROOT/download_script
-
-# Suppresses unneeded parts of the scriptlets
-if [ "$DEP_LIBXSLT" = y ]; then
-  # libxslt pulls docbook-xsl in, which populates the catalog with annoying
-  # **EDITME** references. Fortunately, those lines are regognizable because
-  # they occur between lines containing '/etc/xml/catalog' at the end of the
-  # line (without '&&'). I  have not found a simple way to delete lines
-  # between 2 addresses, excluding either the first or the last one. So use
-  # a loop for accumulating lines and deleting at the end.
-  # Sorry for sed syntax.
-  sed -i '\@^[[:space:]]*/etc/xml/catalog$@{
-n
-:a
-\@/etc/xml/catalog$@bb
-N
-ba
-:b
-d}' \
-      $BUILDDIR$BLFS_ROOT/scripts/*docbook-xsl
-fi
-if [ "$DEP_SUDO" = y ]; then
-  sed -i '/cat.*pam.d/i mkdir -p /etc/pam.d' $BUILDDIR$BLFS_ROOT/scripts/*sudo
-fi
-# At last generates the build Makefile
-mkdir -p $BUILDDIR$BLFS_ROOT/work
-pushd $BUILDDIR$BLFS_ROOT/work
-../gen-makefile.sh
-# The generated Makefile updates the tracking file after each package
-# installation, using libxslt, which is not installed yet. So move
-# updating to the end of the process, adding an 'update' target
-sed -i -e '/xsltproc/,+6d' \
-       -e '/^all/i update:' \
-       -e 's/touch/@touch/' Makefile
-cat >> Makefile << EOF
-update: all
-	@echo Updating the tracking file
-	@for pack in \$\$(grep '<productname' ../$LFS_XML/tmp/lfs-full.xml | \\
-		sed 's/.*>\([^<]*\)<.*/\1/' | \\
-		sort | uniq); do \\
-	    case "x\$\$pack" in \\
-	      xgcc* | *pass[12] | xvim | \\
-	      xshadow | xPython | xlinux-headers | xdbus | xsystemd )\\
-		continue ;; \\
-	    esac; \\
-	    VERSION=\$\$(grep -A1 ">\$\$pack</product" \\
-			../$LFS_XML/tmp/lfs-full.xml | \\
-		head -n2|  \\
-		sed -n '2s/.*>\([^<]*\)<.*/\1/p');  \\
-	    xsltproc --stringparam packages ../packages.xml \\
-		--stringparam package \$\$pack \\
-		--stringparam version \$\$VERSION \\
-		-o track.tmp \\
-		../xsl/bump.xsl \$(TRACKING_FILE); \\
-	    sed -i 's@PACKDESC@$BLFS_ROOT/packdesc.dtd@' track.tmp; \\
-	    xmllint --format --postvalid track.tmp > \$(TRACKING_FILE); \\
-	    rm track.tmp; \\
-	done; \\
-	VERSION=\$\$(grep 'echo.*lfs-release' ../$LFS_XML/tmp/lfs-full.xml | \\
-	             sed 's/.*echo[ ]*\([^ ]*\).*/\1/'); \\
-	xsltproc --stringparam packages ../packages.xml \\
-	    --stringparam package LFS-Release \\
-	    --stringparam version \$\$VERSION \\
-	    -o track.tmp \\
-	    ../xsl/bump.xsl \$(TRACKING_FILE); \\
-	sed -i 's@PACKDESC@$BLFS_ROOT/packdesc.dtd@' track.tmp; \\
-	xmllint --format --postvalid track.tmp > \$(TRACKING_FILE); \\
-	rm track.tmp; \\
-	for file in *-*; do \\
-	    xsltproc --stringparam packages ../packages.xml \\
-		--stringparam package \$\${file##*z-} \\
-		-o track.tmp \\
-		../xsl/bump.xsl \$(TRACKING_FILE); \\
-	    sed -i 's@PACKDESC@$BLFS_ROOT/packdesc.dtd@' track.tmp; \\
-	    xmllint --format --postvalid track.tmp > \$(TRACKING_FILE); \\
-	    rm track.tmp; \\
-	done
-	@touch \$@
-	@echo -e "\n\n "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK
-	@echo --------------------------------------------------------------------------------\$(WHITE)
-EOF
-popd
-}

common/libs/func_save.sh

@@ -1,83 +0,0 @@
-#----------------------------------#
-wrt_save_target() {            #
-#----------------------------------#
-
-    local target
-    case $1 in
-        SUDO_TGT   ) target=SUDO ;;
-        CHROOT_TGT ) target=CHROOT ;;
-    esac
-    CHROOT_wrt_target save-ch5 "$PREV";
-    wrt_save_work $target
-    wrt_touch
-    PREV=save-ch5
-    eval $1=\"\$$1 save-ch5\"
-}
-
-#----------------------------------#
-wrt_save_work() {               #
-#----------------------------------#
-  local    ROOT_DIR
-  case x"$1" in
-      xSUDO  ) ROOT_DIR="$BUILDDIR/" ;;
-      xCHROOT) ROOT_DIR=/          ;;
-  esac
-
-  local PRUNEPATH="./dev ./home ./lost+found ./media ./mnt ./opt ./proc ./root ./run ./srv ./sys ./tmp ./var"
-  local DEST_TOPDIR="${ROOT_DIR}${SCRIPT_ROOT}"
-
-(
-    cat << EOF
-	@mkdir -p /tmp >>logs/\$@ 2>&1 && \\
-	TARNAME=chapter5-\$\$(date +%Y-%m-%d-T-%Hh%M).tar && \\
-        TMPFILE=\$\$(mktemp -p /tmp) && \\
-        TMPLOG=\$\$(mktemp -p /tmp) && \\
-	for F in $PRUNEPATH; do echo \$\$F >> \$\$TMPFILE; done && \\
-	tar -X \$\$TMPFILE -cvf /tmp/\$\$TARNAME -C ${ROOT_DIR} . >>\$\$TMPLOG 2>>logs/\$@ && \\
-	cat \$\$TMPLOG >>logs/\$@ 2>&1 && \\
-	mv /tmp/\$\$TARNAME $DEST_TOPDIR >>logs/\$@ 2>&1 && \\
-	rm \$\$TMPFILE \$\$TMPLOG
-EOF
-) >> $MKFILE.tmp
-
-}
-
-#----------------------------------#
-wrt_do_ica_work() {                #
-#----------------------------------#
-  echo -e "\t@extras/do_ica_work $1 $2 $ICALOGDIR $3 >>logs/\$@ 2>&1" >> $MKFILE.tmp
-}
-
-#----------------------------------#
-wrt_logs() {                       #
-#----------------------------------#
-  local build=build_$1
-  local file
-
-(
-    cat << EOF
-	@cd logs && \\
-	mkdir $build && \\
-	mv -f `echo ${system_build} | sed 's/ /* /g'`* $build && \\
-	if [ ! $build = build_1 ] ; then \\
-	  cd $build && \\
-	  for file in \`ls .\` ; do \\
-	    mv -f \$\$file \`echo \$\$file | sed -e 's,-$build,,'\` ; \\
-	  done ; \\
-	fi
-	@cd /\$(SCRIPT_ROOT)
-	@if [ -d test-logs ] ; then \\
-	  cd test-logs && \\
-	  mkdir $build && \\
-	  mv -f `echo ${system_build} | sed 's/ /* /g'`* $build && \\
-	  if [ ! $build = build_1 ] ; then \\
-	    cd $build && \\
-	    for file in \`ls .\` ; do \\
-	      mv -f \$\$file \`echo \$\$file | sed -e 's,-$build,,'\` ; \\
-	    done ; \\
-	  fi ; \\
-	  cd /\$(SCRIPT_ROOT) ; \\
-	fi ;
-EOF
-) >> $MKFILE.tmp
-}

common/libs/func_validate_configs.sh

@@ -1,3 +1,5 @@
+# $Id$
+
 declare -r dotSTR=".................."
 
 
@@ -5,10 +7,12 @@ declare -r dotSTR=".................."
 validate_config() {          # Are the config values sane (within reason)
 #----------------------------#
 : <<inline_doc
-      Validates the configuration parameters.
+      Validates the configuration parameters. The global var PROGNAME selects the
+    parameter list.
 
     input vars: none
     externals:  color constants
+                PROGNAME (lfs,hlfs,clfs,clfs2,clfs3,blfs)
     modifies:   none
     returns:    nothing
     on error:   write text to console and dies
@@ -16,33 +20,45 @@ validate_config() {          # Are the config values sane (within reason)
 inline_doc
 
   # Common settings by Config.in sections and books family
-  local -r     BOOK_common="COMMIT BOOK CUSTOM_TOOLS"
+  local -r     BOOK_common="BOOK CUSTOM_TOOLS"
+  local -r      BOOK_clfsX="ARCH TARGET"
   local -r  GENERAL_common="LUSER LGROUP LHOME BUILDDIR CLEAN GETPKG SRC_ARCHIVE \
-                            RETRYSRCDOWNLOAD RETRYDOWNLOADCNT DOWNLOADTIMEOUT \
+                            SERVER GETKERNEL RUNMAKE"
-                            RUNMAKE"
+  local -r    BUILD_chroot="TEST BOMB_TEST STRIP"
-  local -r    BUILD_chroot="TEST STRIP"
   local -r    BUILD_common="FSTAB CONFIG TIMEZONE PAGE LANG INSTALL_LOG"
-  local -r ADVANCED_chroot="COMPARE RUN_ICA ITERATIONS OPTIMIZE"
+  local -r ADVANCED_chroot="COMPARE RUN_ICA RUN_FARCE ITERATIONS OPTIMIZE"
   local -r ADVANCED_common="REPORT REBUILD_MAKEFILE"
 
   # BOOK Settings by book
-  local -r   LFS_book="$BOOK_common INITSYS BLFS_TOOL"
+  local -r   LFS_book="$BOOK_common BLFS_TOOL"
+  #local -r HLFS_added="SET_SSP SET_ASLR SET_PAX SET_HARDENED_TMP SET_WARNINGS \
+  #                     SET_MISC SET_BLOWFISH"
+  local -r HLFS_added=""
+  local -r  HLFS_book="$BOOK_common BLFS_TOOL MODEL KERNEL GRSECURITY_HOST $HLFS_added"
+  local -r  CLFS_book="$BOOK_common BLFS_TOOL METHOD $BOOK_clfsX TARGET32 BOOT_CONFIG"
+  local -r CLFS2_book="$BOOK_common BLFS_TOOL        $BOOK_clfsX"
+  local -r CLFS3_book="$BOOK_common                  $BOOK_clfsX PLATFORM MIPS_LEVEL"
 
   # Build Settings by book
-  local -r   LFS_build="$BUILD_chroot NCURSES5 $BUILD_common PKGMNGT FULL_LOCALE WRAP_INSTALL"
+  local -r   LFS_build="$BUILD_chroot VIMLANG $BUILD_common"
-
+  local -r  HLFS_build="$BUILD_chroot         $BUILD_common"
-  # System Settings by book
+  local -r  CLFS_build="$BUILD_chroot VIMLANG $BUILD_common"
-  local -r LFS_system="HOSTNAME INTERFACE IP_ADDR GATEWAY PREFIX BROADCAST DOMAIN DNS1 DNS2 FONT KEYMAP LOCAL LOG_LEVEL"
+  local -r CLFS2_build="STRIP         VIMLANG $BUILD_common"
+  local -r CLFS3_build="                      $BUILD_common"
 
   # Full list of books settings
-  local -r   lfs_PARAM_LIST="$LFS_book   $GENERAL_common $LFS_build $LFS_system  $ADVANCED_chroot ALL_CORES CPUSET N_PARALLEL REALSBU SAVE_CH5 $ADVANCED_common"
+  local -r   lfs_PARAM_LIST="$LFS_book   $GENERAL_common $LFS_build   $ADVANCED_chroot $ADVANCED_common"
-#  local -r  blfs_PARAM_LIST="BRANCH_ID BLFS_ROOT BLFS_XML TRACKING_DIR"
+  local -r  hlfs_PARAM_LIST="$HLFS_book  $GENERAL_common $HLFS_build  $ADVANCED_chroot $ADVANCED_common"
+  local -r  clfs_PARAM_LIST="$CLFS_book  $GENERAL_common $CLFS_build  $ADVANCED_chroot $ADVANCED_common"
+  local -r clfs2_PARAM_LIST="$CLFS2_book $GENERAL_common $CLFS2_build                  $ADVANCED_common"
+  local -r clfs3_PARAM_LIST="$CLFS3_book $GENERAL_common $CLFS3_build                  $ADVANCED_common"
+  local -r  blfs_PARAM_LIST="BRANCH_ID BLFS_ROOT BLFS_XML TRACKING_DIR"
 
-  # Additional variables
+  # Additional variables (add DEP_DBXSL when required again)
-  local -r blfs_tool_PARAM_LIST="\
+  local -r blfs_tool_PARAM_LIST="BLFS_BRANCH_ID BLFS_ROOT BLFS_XML TRACKING_DIR \
-     BLFS_COMMIT BLFS_ROOT BLFS_XML TRACKING_DIR \
+                                 DEP_LIBXML DEP_LIBXSLT DEP_TIDY DEP_UNZIP \
-     DEP_LIBXML DEP_LIBXSLT DEP_DBXML DEP_LYNX DEP_SUDO DEP_WGET \
+                                 DEP_DBXML DEP_LYNX DEP_SUDO DEP_WGET \
-     DEP_GIT DEP_GPM"
+                                 DEP_SVN DEP_GPM"
   local -r custom_tool_PARAM_LIST="TRACKING_DIR"
 
   # Internal variables
@@ -63,15 +79,6 @@ inline_doc
     exit 1
   }
 
-# This function is only used when testing package management files.
-  write_pkg_and_die() {
-    echo -e "\n${DD_BORDER}"
-    echo    "Package management is requested but" >&2
-    echo -e $* >&2
-    echo -e "${DD_BORDER}\n"
-    exit 1
-  }
-
   validate_file() {
      # For parameters ending with a '+' failure causes a warning message only
      echo -n "`eval echo $PARAM_VALS`"
@@ -121,19 +128,21 @@ inline_doc
   }
 
   set +e
-  for config_param in $lfs_PARAM_LIST; do
+  PARAM_GROUP=${PROGNAME}_PARAM_LIST
+  for config_param in ${!PARAM_GROUP}; do
     case $config_param in
       # Envvars that depend on other settings to be displayed
+      GETKERNEL ) if [[ -z "$CONFIG" ]] && [[ -z "$BOOT_CONFIG" ]] ; then
+                    [[ "$GETPKG" = "y" ]] && echo -e "`eval echo $PARAM_VALS`"
+                  fi ;;
       COMPARE)    [[ ! "$COMPARE" = "y" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
       RUN_ICA)    [[ "$COMPARE" = "y" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
+      RUN_FARCE)  [[ "$COMPARE" = "y" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
       ITERATIONS) [[ "$COMPARE" = "y" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
+      BOMB_TEST)  [[ ! "$TEST" = "0" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
       TARGET32)   [[ -n "${TARGET32}" ]] &&  echo -e "`eval echo $PARAM_VALS`" ;;
       MIPS_LEVEL) [[ "${ARCH}" = "mips" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
-      RETRYSRCDOWNLOAD) [[ "$GETPKG" = "y" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
+      SERVER)     [[ "$GETPKG" = "y" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
-      RETRYDOWNLOADCNT) [[ "$GETPKG" = "y" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
-      DOWNLOADTIMEOUT)  [[ "$GETPKG" = "y" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
-      CPUSET)           [[ "$HAVE_CGROUP" = "y" ]] && [[ "$ALL_CORES" = "y" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
-      N_PARALLEL)       [[ "$ALL_CORES" = "n" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
 
       # Envars that requires some validation
       LUSER)      echo -e "`eval echo $PARAM_VALS`"
@@ -154,7 +163,7 @@ inline_doc
         #  warning -z+   -w+
       SRC_ARCHIVE) [[ "$GETPKG" = "y" ]] && validate_dir -z+ -d -w+ ;;
         # The build directory/partition MUST exist and be writable by the user
-      BUILDDIR)   validate_dir -z -d
+      BUILDDIR)   validate_dir -z -d -w
                   [[ "xx x/x" =~ x${!config_param}x ]] && write_error_and_die ;;
       LHOME)      validate_dir -z -d ;;
 
@@ -166,7 +175,7 @@ inline_doc
       BOOT_CONFIG) [[ "${METHOD}" = "boot" ]] && validate_file -z -e -s ;;
 
         # Treatment of LANG parameter
-      LANG )  # See if the locale value has been set
+      LANG )  # See it the locale value has been set
                echo -n "`eval echo $PARAM_VALS`"
                [[ -z "${!config_param}" ]] &&
                  echo " -- Variable $config_param cannot be empty!" &&
@@ -174,36 +183,11 @@ inline_doc
                echo
                ;;
 
-        # Treatment of HOSTNAME
+      # BLFS params.
-      HOSTNAME)  echo -e "`eval echo $PARAM_VALS`"
+      BRANCH_ID | BLFS_ROOT | BLFS_XML )  echo "`eval echo $PARAM_VALS`" ;;
-                 [[ "${!config_param}" = "**EDIT ME**" ]] && write_error_and_die
+      TRACKING_DIR ) validate_dir -z -d -w ;;
-                 ;;
 
-        # Case of PKGMNGT: two files, packageManager.xml and packInstall.sh
+      # Display non-validated envars found in ${PROGNAME}_PARAM_LIST
-        # must exist in $PKGMNGTDIR if PKGMNGT='y':
-      PKGMNGT) echo -e "`eval echo $PARAM_VALS`"
-               if [ "$PKGMNGT" = y ]; then
-                 if [ ! -e "$PKGMNGTDIR/packageManager.xml" ]; then
-                   write_pkg_and_die $PKGMNGTDIR/packageManager.xml does not exist
-                 fi
-                 if [ ! -e "$PKGMNGTDIR/packInstall.sh" ]; then
-                   write_pkg_and_die $PKGMNGTDIR/packInstall.sh does not exist
-                 fi
-                 if [ ! -s "$PKGMNGTDIR/packageManager.xml" ]; then
-                   write_pkg_and_die $PKGMNGTDIR/packageManager.xml has zero size
-                 fi
-                 if [ ! -s "$PKGMNGTDIR/packInstall.sh" ]; then
-                   write_pkg_and_die $PKGMNGTDIR/packInstall.sh has zero size
-                 fi
-                 if [ ! -r "$PKGMNGTDIR/packageManager.xml" ]; then
-                   write_pkg_and_die $PKGMNGTDIR/packageManager.xml is not readable
-                 fi
-                 if [ ! -r "$PKGMNGTDIR/packInstall.sh" ]; then
-                   write_pkg_and_die $PKGMNGTDIR/packInstall.sh is not readable
-                 fi
-               fi
-               ;;
-      # Display non-validated envars found in lfs_PARAM_LIST
       * ) echo -e "`eval echo $PARAM_VALS`" ;;
 
     esac

common/libs/func_wrt_Makefile

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# $Id$
+
 #=== MAKEFILE HEADER ===
 
 #----------------------------------#
@@ -15,36 +17,22 @@ wrt_Makefile_header() {            #
 
 SHELL = /bin/bash
 
-SRC            = /sources
 MOUNT_PT       = $BUILDDIR
-PKG_LST        = $PKG_LST
+SCRIPT_ROOT    = $SCRIPT_ROOT
+CMDSDIR        = $PROGNAME-commands
+SRC            = /sources
+SRCSDIR        = \$(MOUNT_PT)\$(SRC)
+FILELOGDIR     = /\$(SCRIPT_ROOT)/$FILELOGDIRBASE
+
 LUSER          = $LUSER
 LGROUP         = $LGROUP
 LHOME          = $LHOME
-SCRIPT_ROOT    = $SCRIPT_ROOT
-
-BASEDIR        = \$(MOUNT_PT)
-SRCSDIR        = \$(BASEDIR)/sources
-CMDSDIR        = \$(BASEDIR)/\$(SCRIPT_ROOT)/$COMMANDS
-LOGDIR         = \$(BASEDIR)/\$(SCRIPT_ROOT)/$LOGDIRBASE
-TESTLOGDIR     = \$(BASEDIR)/\$(SCRIPT_ROOT)/$TESTLOGDIRBASE
-
-crCMDSDIR      = /\$(SCRIPT_ROOT)/$COMMANDS
-crLOGDIR       = /\$(SCRIPT_ROOT)/$LOGDIRBASE
-crTESTLOGDIR   = /\$(SCRIPT_ROOT)/$TESTLOGDIRBASE
-crFILELOGDIR   = /\$(SCRIPT_ROOT)/$FILELOGDIRBASE
-
-SU_LUSER       = sudo -H -u \$(LUSER) sh -c
 LUSER_HOME     = \$(LHOME)/\$(LUSER)
-PRT_DU         = echo -e "\nKB: \`du -skx --exclude=\$(SCRIPT_ROOT) --exclude=lost+found \$(MOUNT_PT) \`\n"
+SU_LUSER       = su - \$(LUSER) -c
-PRT_DU_CR      = echo -e "\nKB: \`du -skx --exclude=\$(SCRIPT_ROOT) --exclude=lost+found --exclude /var/lib / \`\n"
 
 ADD_REPORT       = $REPORT
 ADD_CUSTOM_TOOLS = $CUSTOM_TOOLS
 ADD_BLFS_TOOLS   = $BLFS_TOOL
-PKGMNGT          = $PKGMNGT
-WRAP_INSTALL     = $WRAP_INSTALL
-CPUSET           = $CPUSET
 
 
 export PATH := \${PATH}:/usr/sbin
@@ -61,43 +49,16 @@ EOF
 #==== TARGET HEADER ====
 
 #----------------------------------#
-LUSER_wrt_target() {               # Create target and initialize log file
+wrt_target() {                     # Create target
 #----------------------------------#
   local i=$1
   local PREV=$2
-  local version
-  if [ "$3" != "" ]; then
-    version=-$3
-  fi
 (
 cat << EOF
 
 $i:  $PREV
 	@\$(call echo_message, Building)
-${NO_PROGRESS}	@export BASHBIN=\$(SHELL) && \$(SHELL) progress_bar.sh \$@ \$\$PPID &
+	@export BASHBIN=\$(SHELL) && \$(SHELL) progress_bar.sh \$@ \$\$PPID &
-	@echo "\$(nl_)\`date\`\$(nl_)" >logs/\$@$version
-	@ : > envars
-EOF
-) >> $MKFILE.tmp
-}
-
-#----------------------------------#
-CHROOT_wrt_target() {              # Create target and initialize log file
-#----------------------------------#
-  local i=$1
-  local PREV=$2
-  local version
-  if [ "$3" != "" ]; then
-    version=-$3
-  fi
-(
-cat << EOF
-
-$i:  $PREV
-	@\$(call echo_message, Building)
-${NO_PROGRESS}	@export BASHBIN=\$(SHELL) && \$(SHELL) progress_bar.sh \$@ \$\$PPID &
-	@echo "\$(nl_)\`date\`\$(nl_)" >logs/\$@$version
-	@ : > envars
 EOF
 ) >> $MKFILE.tmp
 }
@@ -105,179 +66,63 @@ EOF
 #=======================
 
 
-#======== UNPACK =======
+#======== RUN THE SCRIPT =======
 
 #----------------------------------#
-LUSER_wrt_unpack() {               # Unpack and set 'ROOT' var
+wrt_RunAsRoot() {                  # Some not-chroot scripts must be run as root..
-#----------------------------------#
-  local FILE="$1"
-  local optSAVE_PREVIOUS="$2"
-  local version
-  if [ "$3" != "" ]; then
-    version=-"$3"
-  fi
-
-  if [[ "${optSAVE_PREVIOUS}" != "1" ]]; then
-(
-cat << EOF
-	@\$(call remove_existing_dirs,$FILE)
-EOF
-) >> $MKFILE.tmp
-  fi
-
-(
-cat << EOF
-	@\$(PRT_DU) >>logs/\$@$version
-	@\$(call unpack,$FILE)
-	@\$(call get_pkg_root_LUSER)
-EOF
-) >> $MKFILE.tmp
-}
-
-#----------------------------------#
-CHROOT_Unpack() {                  #
-#----------------------------------#
-  local FILE=$1
-  local optSAVE_PREVIOUS=$2
-  local version
-  if [ "$3" != "" ]; then
-    version=-"$3"
-  fi
-
-  if [ "${optSAVE_PREVIOUS}" != "1" ]; then
-(
-cat << EOF
-	@\$(call remove_existing_dirs2,$FILE)
-EOF
-) >> $MKFILE.tmp
-  fi
-
-(
-cat << EOF
-	@\$(PRT_DU_CR) >>logs/\$@$version
-	@\$(call unpack2,$FILE)
-	@\$(call get_pkg_root2)
-EOF
-) >> $MKFILE.tmp
-}
-
-#=======================
-
-
-#===== TESTS LOGS ======
-
-#----------------------------------#
-LUSER_wrt_test_log() {             # Initialize testsuite log file
-#----------------------------------#
-  local version
-  if [ "$2" != "" ]; then
-    version=-$2
-  fi
-  local TESTLOGFILE=$1$version
-(
-cat  << EOF
-	@echo "export  TEST_LOG=\$(TESTLOGDIR)/$TESTLOGFILE" >> envars && \\
-	echo "\$(nl_)\`date\`\$(nl_)" >\$(TESTLOGDIR)/$TESTLOGFILE
-EOF
-) >> $MKFILE.tmp
-}
-
-#----------------------------------#
-CHROOT_wrt_test_log() {            #
-#----------------------------------#
-  local version
-  if [ "$2" != "" ]; then
-    version=-$2
-  fi
-  local TESTLOGFILE=$1$version
-(
-cat  << EOF
-	@echo "export TEST_LOG=\$(crTESTLOGDIR)/$TESTLOGFILE" >> envars && \\
-	echo "\$(nl_)\`date\`\$(nl_)" >\$(crTESTLOGDIR)/$TESTLOGFILE
-EOF
-) >> $MKFILE.tmp
-}
-
-#=======================
-
-
-#======== RUN AS =======
-
-#----------------------------------#
-wrt_RunAsRoot() {                  # Some scripts must be run as root..
 #----------------------------------#
   local MOUNT_ENV
-  local version
-  if [ "$2" != "" ]; then
-    version=-$2
-  fi
   local file=$1
 
+  case ${PROGNAME} in
+    lfs   ) MOUNT_ENV="LFS" ;;
+    clfs  ) MOUNT_ENV="CLFS" ;;
+    clfs2 ) MOUNT_ENV="CLFS" ;;
+    clfs3 ) MOUNT_ENV="CLFS" ;;
+    hlfs  ) MOUNT_ENV="HLFS" ;;
+    *) echo "undefined progname $PROGNAME"; exit 1 ;;
+  esac
+
 (
 cat << EOF
-	@export LFS=\$(MOUNT_PT) && \\
+	@export ${MOUNT_ENV}=\$(MOUNT_PT) && \$(CMDSDIR)/`dirname $file`/\$@ > $LOGDIRBASE/\$@ 2>&1
-	$COMMANDS/`dirname $file`/\$@ >>logs/\$@$version 2>&1
 EOF
 ) >> $MKFILE.tmp
 }
 
 #----------------------------------#
-LUSER_wrt_RunAsUser() {            # Calculate time with perl, footer to log file
+wrt_RunScript() {                  #
 #----------------------------------#
   local file=$1
-  local version
-  if [ "$2" != "" ]; then
-    version=-$2
-  fi
 
 (
 cat << EOF
-	@source ~/.bashrc && \\
+	@\$(CMDSDIR)/`dirname $file`/\$@ > $LOGDIRBASE/\$@ 2>&1
-	\$(CMDSDIR)/`dirname $file`/\$@ >> \$(LOGDIR)/\$@$version 2>&1
 EOF
 ) >> $MKFILE.tmp
 }
 
-#----------------------------------#
-CHROOT_wrt_RunAsRoot() {           #
-#----------------------------------#
-  local file=$1
-  local version
-  if [ "$2" != "" ]; then
-    version=-$2
-  fi
-(
-cat << EOF
-	@source envars && \\
-	\$(crCMDSDIR)/`dirname $file`/\$@ >>\$(crLOGDIR)/\$@$version 2>&1
-EOF
-) >> $MKFILE.tmp
-
-}
-
 #=======================
 
 
 #====== COPY FSTAB =====
 
 #----------------------------------#
-LUSER_wrt_CopyFstab() {            #
+LUSER_wrt_CopyFstab() {            # Needed for CLFS Sysroot and Embedded
 #----------------------------------#
 (
 cat << EOF
-	@cp -v \$(MOUNT_PT)/sources/fstab \$(MOUNT_PT)/etc/fstab >>logs/\$@ 2>&1 && \\
+	@cp -v \$(MOUNT_PT)/sources/fstab \$(MOUNT_PT)/etc/fstab > $LOGDIRBASE/\$@ 2>&1
-	\$(PRT_DU) >>logs/\$@
 EOF
 ) >> $MKFILE.tmp
 }
 
 #----------------------------------#
-CHROOT_wrt_CopyFstab() {           #
+wrt_CopyFstab() {                  #
 #----------------------------------#
 (
 cat << EOF
-	@cp -v /sources/fstab /etc/fstab >>logs/\$@ 2>&1 && \\
+	@cp -v /sources/fstab /etc/fstab > $LOGDIRBASE/\$@ 2>&1
-	\$(PRT_DU_CR) >>logs/\$@
 EOF
 ) >> $MKFILE.tmp
 }
@@ -288,7 +133,7 @@ EOF
 #==== INSTALLED FILES LOGS ====
 
 #----------------------------------#
-LUSER_wrt_TouchTimestamp() {       #
+LUSER_wrt_TouchTimestamp() {       # Needed for CLFS Sysroot and Embedded
 #----------------------------------#
 (
 cat << EOF
@@ -298,7 +143,7 @@ EOF
 }
 
 #----------------------------------#
-CHROOT_wrt_TouchTimestamp() {      #
+wrt_TouchTimestamp() {             #
 #----------------------------------#
 (
 cat << EOF
@@ -308,48 +153,23 @@ EOF
 }
 
 #----------------------------------#
-LUSER_wrt_LogNewFiles() {          #
+LUSER_wrt_LogNewFiles() {          # Needed for CLFS Sysroot and Embedded
 #----------------------------------#
+  local name=$1
 (
 cat << EOF
-	@\$(call log_new_files_LUSER,$1)
+	@\$(call log_new_files_LUSER,$name)
 EOF
 ) >> $MKFILE.tmp
 }
 
 #----------------------------------#
-CHROOT_wrt_LogNewFiles() {         #
+wrt_LogNewFiles() {                #
 #----------------------------------#
+  local name=$1
 (
 cat << EOF
-	@\$(call log_new_files,$1)
+	@\$(call log_new_files,$name)
-EOF
-) >> $MKFILE.tmp
-}
-
-#=======================
-
-
-#==== RM BUILD DIRS ====
-
-#----------------------------------#
-LUSER_RemoveBuildDirs() {          #
-#----------------------------------#
-  local name=`echo ${1} | sed 's/[0-9]-//'`
-(
-cat << EOF
-	@\$(call remove_build_dirs,$name)
-EOF
-) >> $MKFILE.tmp
-}
-
-#----------------------------------#
-CHROOT_wrt_RemoveBuildDirs() {     #
-#----------------------------------#
-  local name=`echo ${1} | sed 's/[0-9]-//'`
-(
-cat << EOF
-	@\$(call remove_build_dirs2,$name)
 EOF
 ) >> $MKFILE.tmp
 }

common/makefile-functions

@@ -1,3 +1,6 @@
+
+# $Id$
+
 BOLD    = ""
 RED     = ""
 GREEN   = ""
@@ -24,28 +27,28 @@ endef
 define sh_echo_PHASE
   echo $(BOLD)--------------------------------------------------------------------------------;\
   echo  $(tab_)$(tab_)Executing $(BLUE)$(1)$(WHITE) scripts; \
-  echo $(BOLD)--------------------------------------------------------------------------------$(WHITE)
+  echo $(BOLD)--------------------------------------------------------------------------------echo $(WHITE)
 endef
 
 define echo_SU_request
   @echo $(BOLD)--------------------------------------------------------------------------------
   @echo $(BLUE)$@
-  @echo $(WHITE)ROOT privilege is required to perform a number of commands
+  @echo $(WHITE)ROOT privilege is required to perform a number commands
-  @echo sudo may request a password in order to execute all high privilege commands
+  @echo sudo will request a password to all high privilege cmds to execute correctly
 endef
 
 define echo_SULUSER_request
   @echo $(BOLD)--------------------------------------------------------------------------------
   @echo $(BOLD)$(BLUE)$@
   @echo $(WHITE)You are going to log into the user account $(BOLD)$(YELLOW)$(LUSER)$(OFF)
-  @echo sudo may require a password
+  @echo sudo requires a password
 endef
 
 define echo_CHROOT_request
   @echo $(BOLD)--------------------------------------------------------------------------------
   @echo $(BOLD)$(BLUE)$@
-  @echo $(WHITE)You are going to CHROOT into $(MOUNT_PT)
+  @echo $(WHITE)You are going to CHROOT into $(MOUNT_PT) $(BOLD)$(YELLOW)$(LUSER)$(OFF)
-  @echo a password may be required
+  @echo a password is required
 endef
 
 define echo_message
@@ -53,114 +56,6 @@ define echo_message
   @echo $(BOLD)$(1) target $(BLUE)$@$(BOLD)$(WHITE)
 endef
 
-#=======================
-
-
-#=== BUILD FUNCTIONS ===
-
-define remove_existing_dirs
-  @PKG_PATH=`ls -t $(SRCSDIR)/$(1) | head -n1` && \
-  ROOT=`tar -tf $$PKG_PATH | head -n1 | sed -e 's@^./@@;s@/.*@@'` && \
-  [ -n "$$ROOT" ] && \
-  if [ -d $(SRCSDIR)/$$ROOT ]; then \
-    rm -rf $(SRCSDIR)/$$ROOT && \
-    rm -rf $(SRCSDIR)/$${ROOT%-*}-build; \
-  fi;
-endef
-
-define remove_existing_dirs2
-  @PKG_PATH=`ls -t $(SRC)/$(1) | head -n1` && \
-  ROOT=`tar -tf $$PKG_PATH | head -n1 | sed -e 's@^./@@;s@/.*@@'` && \
-  [ -n "$$ROOT" ] && \
-  if [ -d $(SRC)/$$ROOT ]; then \
-    rm -rf $(SRC)/$$ROOT && \
-    rm -rf $(SRC)/$${ROOT%-*}-build; \
-  fi;
-  @if [ "$(PKGMNGT)" = "y" ] && [ -d $(SRC)/$@ ]; then \
-    rm -rf $(SRC)/$@ && rm -f $(SRC)/*.deb; \
-  fi;
-endef
-
-#==#
-
-define unpack
-  @cd $(SRCSDIR) && \
-  tar -xvf `ls -t $(1) | head -n1` > $(PKG_LST)
-endef
-
-define unpack2
-  @cd $(SRC) && \
-  tar -xvf `ls -t $(1) | head -n1` > $(PKG_LST)
-endef
-
-#==#
-
-define get_pkg_root
-  @ROOT=`head -n1 $(SRCSDIR)/$(PKG_LST) | sed 's@^./@@;s@/.*@@'` && \
-  if [ "$(1)" != "nouser" ]; then \
-    echo "export PKGDIR=$(SRCSDIR)/$$ROOT" > envars; \
-    chown -R $(LUSER) $(SRCSDIR)/$$ROOT; \
-  else \
-    echo "export PKGDIR=$(crSRCSDIR)/$$ROOT" > envars; \
-  fi;
-endef
-
-define get_pkg_root2
-  @ROOT=`head -n1 $(SRC)/$(PKG_LST) | sed 's@^./@@;s@/.*@@'` && \
-  echo "export PKGDIR=$(SRC)/$$ROOT" > envars; \
-  if [ "$(PKGMNGT)" = "y" ]; then \
-    echo "export PKG_DEST=$(SRC)/$@" >> envars; \
-    echo "source packInstall.sh" >> envars; \
-    echo "export -f packInstall" >> envars; \
-    if [ "$(WRAP_INSTALL)" = "y" ]; then \
-      echo "export -f wrapInstall" >> envars; \
-    fi; \
-  fi;
-endef
-
-define get_pkg_root_LUSER
-  @ROOT=`head -n1 $(SRCSDIR)/$(PKG_LST) | sed 's@^./@@;s@/.*@@'` && \
-  echo "export PKGDIR=$(SRCSDIR)/$$ROOT" > envars
-endef
-
-#==#
-
-define touch_timestamp
-  @touch $(SRC)/timestamp-marker && sleep 1
-endef
-
-define touch_timestamp_LUSER
-  @touch $(SRCSDIR)/timestamp-marker && sleep 1
-endef
-
-define log_new_files
-  @find / -xdev ! -path "/$(SCRIPT_ROOT)/*" ! -path "/tmp/*" ! -path "$(SRC)/*" \
-  -newer $(SRC)/timestamp-marker -not -type d \
-  -printf "%p\t%s\t%u:%g\t%m\t%l\n" | sort > $(crFILELOGDIR)/$(1)
-endef
-
-define log_new_files_LUSER
-  @find $(BASEDIR) -xdev ! -path "$(BASEDIR)/$(SCRIPT_ROOT)/*" ! -path "$(BASEDIR)/tmp/*" ! -path "$(SRCSDIR)/*" \
-  -newer $(SRCSDIR)/timestamp-marker -not -type d \
-  -printf "%p\t%s\t%u:%g\t%m\t%l\n" | sort > $(BASEDIR)$(crFILELOGDIR)/$(1)
-endef
-
-#==@
-
-define remove_build_dirs
-  @ROOT=`head -n1 $(SRCSDIR)/$(PKG_LST) | sed 's@^./@@;s@/.*@@'` && \
-  rm -rf $(SRCSDIR)/$$ROOT && \
-  rm -rf $(SRCSDIR)/$(1)-build
-endef
-
-define remove_build_dirs2
-  @ROOT=`head -n1 $(SRC)/$(PKG_LST) | sed 's@^./@@;s@/.*@@'` && \
-  rm -rf $(SRC)/$$ROOT && \
-  rm -rf $(SRC)/$(1)-build
-endef
-
-#==#
-
 define housekeeping
   @touch  $@ && \
   sleep .25 && \
@@ -175,14 +70,40 @@ endef
 #=======================
 
 
+#=== INSTALL_LOG FUNCTIONS ===
+
+define touch_timestamp
+  @touch $(SRC)/timestamp-marker && sleep 1
+endef
+
+define touch_timestamp_LUSER
+  @touch $(SRCSDIR)/timestamp-marker && sleep 1
+endef
+
+define log_new_files
+  @find / -xdev ! -path "/$(SCRIPT_ROOT)/*" ! -path "/tmp/*" ! -path "$(SRC)/*" \
+  -newer $(SRC)/timestamp-marker -not -type d \
+  -printf "%p\t%s\t%u:%g\t%m\t%l\n" | sort > $(FILELOGDIR)/$(1)
+endef
+
+define log_new_files_LUSER
+  @find $(MOUNT_PT) -xdev ! -path "$(MOUNT_PT)/$(SCRIPT_ROOT)/*" ! -path "$(MOUNT_PT)/tmp/*" ! -path "$(SRCSDIR)/*" \
+  -newer $(SRCSDIR)/timestamp-marker -not -type d \
+  -printf "%p\t%s\t%u:%g\t%m\t%l\n" | sort > $(MOUNT_PT)$(FILELOGDIR)/$(1)
+endef
+
+#=======================
+
+
 #==== FINAL MESSAGES ===
 
 define echo_report
   echo ; \
   echo $(BOLD) The report file $(BLUE)$(1)$(BOLD) has been created ; \
   echo ; \
-  echo $(WHITE)Please send the $(BOLD)$(MOUNT_PT)/jhalfs/$(1)$(WHITE) ; \
+  echo $(WHITE)If this is a development book build, please send the ; \
-  echo file to $(BOLD)alfs-discuss@lists.linuxfromscratch.org$(WHITE) ; \
+  echo $(BOLD)$(MOUNT_PT)/$(SCRIPT_ROOT)/$(1)$(WHITE) file to ; \
+  echo $(BOLD)manuel@linuxfromscratch.org$(WHITE) ; \
   echo ; \
   echo That will help us to keep more accurate SBU and ; \
   echo disk usage values into the book. Thanks. ; \
@@ -200,25 +121,26 @@ define echo_finished
   @echo To be able to boot your new system you need to follow
   @echo the next steps:$(WHITE)
   @echo
-  @echo  $(tab_)- Mount the virtual kernel file systems.
-  @echo
   @echo  $(tab_)- Enter to the chroot using the command found
-  @echo  $(tab_)"  in the section -Entering the Chroot Environment-"
+  @echo  $(tab_)in the section -Entering the Chroot Environment-
-  @echo  $(tab_)"  except if building with METHOD=boot."
+  @echo  $(tab_)except if building CLFS with METHOD=boot.
   @echo
   @echo  $(tab_)- Set a password for the root user.
   @echo
-  @echo  $(tab_)- Edit or create /etc/fstab and any other configuration file
+  @echo  $(tab_)- Edit or create /etc/fstab, /etc/hosts, /etc/sysconfig/clock,
-  @echo  $(tab_)"  required to suit your needs."
+  @echo  $(tab_)/etc/sysconfig/console, /etc/sysconfig/network,
+  @echo  $(tab_)/etc/sysconfig//network-devices/ifconfig.eth0/ipv4 and
+  @echo  $(tab_)any other configuration file required to suit your needs.
   @echo
-  @echo  $(tab_)- Set-up the boot loader.
+  @echo  $(tab_)- Exit from the chroot.
   @echo
-  @echo  $(tab_)You can set-up the new boot-loader installed on the new system
+  @echo  $(tab_)- Set-up the boot loader, except if building CLFS with METHOD=boot.
-  @echo  $(tab_)or the host bootloader.
+  @echo  $(tab_)You can set-up the host bootloader or the new boot-loader
-  @echo
+  @echo  $(tab_)installed on the new system.
-  @echo  $(tab_)If the last, it is better to exit first from the chroot.
+  @echo  $(tab_)If the last, you must to mount the virtual filesystems, re-enter
-  @echo
+  @echo  $(tab_)the chroot and be sure that /dev is populated with the
-  @echo  $(tab_)- Exit from the chroot and umount the filesystems.
+  @echo  $(tab_)required devices before configure the boot-loader. When ready,
+  @echo  $(tab_)exit from the chroot and umount the filesystems
   @echo
   @echo If you are an experienced LFS user, several of those steps can be
   @echo skipped or done in a different way. But then, that is something
@@ -246,7 +168,7 @@ define echo_boot_finished
   @echo  1.If it is necessary, transfer the newly created partition to the target machine
   @echo  2.Boot the new partition.
   @echo  3.Once you are logged in issue the following commands
-  @echo  $(tab_) $(BOLD)cd /jhalfs
+  @echo  $(tab_) $(BOLD)cd /$(SCRIPT_ROOT)
   @echo  $(tab_) $(BOLD)make makesys
   @echo  The build process should resume. Follow any instructions that appear.
   @echo --------------------------------------------------------------------------------

common/packages.xsl

@@ -1,60 +0,0 @@
-<?xml version='1.0' encoding='ISO-8859-1'?>
-
-<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-    version="1.0">
-
-  <xsl:output method="text"/>
-
-  <!-- Should we include a package manager? -->
-  <xsl:param name="pkgmngt" select="'n'"/>
-
-  <!-- The system for LFS: sysv of systemd -->
-  <xsl:param name="revision" select="'sysv'"/>
-
-  <xsl:template match="/">
-    <xsl:apply-templates
-         select="//varlistentry[(@revision=$revision or not(@revision))  and
-                      //para[contains(string(),'Download:')]"/>
-    <xsl:if test="$pkgmngt='y'">
-      <xsl:apply-templates
-        select="document('packageManager.xml')//sect1[@id='package']//para"/>
-    </xsl:if>
-  </xsl:template>
-
-  <xsl:template match="para">
-      <xsl:call-template name="package_name">
-        <xsl:with-param name="url" select="ulink/@url"/>
-      </xsl:call-template>
-  </xsl:template>
-
-  <xsl:template name="package_name">
-    <xsl:param name="url" select="'foo'"/>
-    <xsl:variable name="sub-url" select="substring-after($url,'/')"/>
-    <xsl:choose>
-      <xsl:when test="contains($sub-url,'/') and
-                      not(substring-after($sub-url,'/')='')">
-        <xsl:call-template name="package_name">
-          <xsl:with-param name="url" select="$sub-url"/>
-        </xsl:call-template>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:choose>
-          <xsl:when test="contains($sub-url,'.patch')"/>
-          <xsl:when test="contains($sub-url,'?')">
-            <xsl:value-of select="substring-before($sub-url,'?')"/>
-            <xsl:text>&#xA;</xsl:text>
-          </xsl:when>
-          <xsl:when test="contains($sub-url,'/')">
-            <xsl:value-of select="substring-before($sub-url,'/')"/>
-            <xsl:text>&#xA;</xsl:text>
-          </xsl:when>
-          <xsl:otherwise>
-            <xsl:value-of select="$sub-url"/>
-            <xsl:text>&#xA;</xsl:text>
-          </xsl:otherwise>
-        </xsl:choose>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-
-</xsl:stylesheet>

common/progress_bar.sh

@@ -1,8 +1,9 @@
-# shellcheck shell=bash
+
+# $Id$
 
 set -e
 
-# Be sure that we know the target name
+# Be sure that we know the taget name
 [[ -z $1 ]] && exit
 TARGET=$1  # Remember the target build we are looking for
 MAKE_PPID=$2
@@ -14,19 +15,19 @@ declare -r  ERASE_LINE=${CSI}$'2K'
 declare -r  FRAME_OPEN=${CSI}$'2G['
 declare -r  FRAME_CLOSE=${CSI}$'63G]'
 declare -r  TS_POSITION=${CSI}$'65G'
-declare -r  RESET_LINE=${CURSOR_OFF}${ERASE_LINE}${FRAME_OPEN}${FRAME_CLOSE}
+declare -r  LINE_WRAP_OFF=${CSI}$'?7l'
+declare -r  LINE_WRAP_ON=${CSI}$'?7h'
+declare -a  RESET_LINE=${CURSOR_OFF}${ERASE_LINE}${FRAME_OPEN}${FRAME_CLOSE}
 
-declare -r  GRAPHIC_STR="| / - \\ + "
+declare -a  GRAPHIC_STR="| / - \\ + "
 declare -i  SEC=0  # Seconds accumulator
 declare -i  PREV_SEC=0
 
 # Prevent segfault on stripping phases
 if [[ "$BASHBIN" = "/tools/bin/bash" ]] ; then
   SLEEP=/tools/bin/sleep
-elif [ -x /bin/sleep ] ; then
-  SLEEP=/bin/sleep
 else
-  SLEEP=/usr/bin/sleep
+  SLEEP=/bin/sleep
 fi
 
 write_or_exit() {
@@ -54,14 +55,14 @@ while true ; do
 
       # A BASH internal variable, the number of seconds the script
       # has been running. modulo convert to 0-59
-  SEC=$((SECONDS % 60))
+    SEC=$(($SECONDS % 60))
 
       # Detect rollover of the seconds.
     (( PREV_SEC > SEC )) && write_or_exit "${RESET_LINE}"
-  PREV_SEC=$SEC
+    (( PREV_SEC = SEC ))
 
       # Display the accumulated time. div minutes.. modulo seconds.
-  write_or_exit "${TS_POSITION}$((SECONDS / 60)) min. $SEC sec"
+    write_or_exit "${TS_POSITION}$(($SECONDS / 60)) min. $SEC sec"
 done
 
 exit

common/run-in-cgroup.sh

@@ -1,36 +0,0 @@
-#!/bin/bash
-
-if [ -z "$CPUSPEC" ] || [ "$#" -lt 1 ]; then
-	echo "usage: CPUSPEC=... $0 command"
-	exit 1
-fi
-
-ARGS="$@"
-
-set +e
-
-if type systemd-run >/dev/null 2>&1 ; then # systemd
-   sudo systemd-run -G --pty -d --uid=$(whoami)    \
-                    -p AllowedCPUs="$CPUSPEC"      \
-                    --slice "user-$(whoami).slice" \
-                    "$@"
-elif type loginctl >/dev/null 2>&1 ; then #elogind
-   sudo mkdir /sys/fs/cgroup/jhalfs
-   sudo sh -c "echo +cpuset > /sys/fs/cgroup/cgroup.subtree_control"
-   (
-      sudo sh -c "echo $BASHPID > /sys/fs/cgroup/jhalfs/cgroup.procs"
-      sudo sh -c "
-         SESS_CGROUP=/sys/fs/cgroup/\$XDG_SESSION_ID
-         echo $CPUSPEC > \$SESS_CGROUP/cpuset.cpus
-	 ( echo \$BASHPID > \$SESS_CGROUP/cgroup.procs &&
-		 exec sudo -u $(whoami) $ARGS )"
-   )
-   sudo rmdir /sys/fs/cgroup/jhalfs
-else # no session manager
-   sudo mkdir /sys/fs/cgroup/jhalfs
-   sudo sh -c "echo +cpuset > /sys/fs/cgroup/cgroup.subtree_control"
-   sudo sh -c "echo \"$CPUSPEC\" > /sys/fs/cgroup/jhalfs/cpuset.cpus"
-   (sudo sh -c "echo $BASHPID > /sys/fs/cgroup/jhalfs/cgroup.procs" &&
-      exec "$@")
-   sudo rmdir /sys/fs/cgroup/jhalfs
-fi

common/urls.xsl

@@ -1,74 +0,0 @@
-<?xml version='1.0' encoding='ISO-8859-1'?>
-
-<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-    version="1.0">
-
-  <xsl:output method="text"/>
-
-  <!-- Do we use a package manager? -->
-  <xsl:param name="pkgmngt" select="'n'"/>
-
-  <!-- The system for LFS: sysv of systemd -->
-  <xsl:param name="revision" select="'sysv'"/>
-
-  <xsl:template match="/">
-    <xsl:apply-templates select="//varlistentry[@revision=$revision
-                                                or not(@revision)]//ulink"/>
-    <xsl:if test="$pkgmngt='y'">
-      <xsl:apply-templates
-        select="document('packageManager.xml')//ulink"/>
-    </xsl:if>
-  </xsl:template>
-
-  <xsl:template match="ulink">
-      <!-- If some package doesn't have the predefined strings in their
-      name, the next test must be fixed to match it also. Skip possible
-      duplicated URLs due that may be splitted for PDF output -->
-    <xsl:if test="(contains(@url, '.bz2') or contains(@url, '.tar.gz') or
-                  contains(@url, '.tgz') or contains(@url, '.patch') or
-                  contains(@url, '.xz') or contains(@url, '.lzma')) and
-                  not(ancestor-or-self::*/@condition = 'pdf')">
-      <!-- Extract the package name -->
-      <xsl:variable name="package">
-        <xsl:call-template name="package.name">
-          <xsl:with-param name="url" select="@url"/>
-        </xsl:call-template>
-      </xsl:variable>
-      <!-- Write the upstream URLs, fixing the redirected ones -->
-      <xsl:choose>
-        <xsl:when test="contains(@url,'?')">
-          <xsl:value-of select="substring-before(@url,'?')"/>
-        </xsl:when>
-        <xsl:otherwise>
-          <xsl:value-of select="@url"/>
-        </xsl:otherwise>
-      </xsl:choose>
-      <!-- Write MD5SUM value -->
-      <xsl:text> </xsl:text>
-      <xsl:value-of select="../following-sibling::para/literal"/>
-      <xsl:text>&#x0a;</xsl:text>
-    </xsl:if>
-  </xsl:template>
-
-  <xsl:template name="package.name">
-    <xsl:param name="url"/>
-    <xsl:choose>
-      <xsl:when test="contains($url, '/') and not (substring-after($url,'/')='')">
-        <xsl:call-template name="package.name">
-          <xsl:with-param name="url" select="substring-after($url, '/')"/>
-        </xsl:call-template>
-      </xsl:when>
-      <xsl:otherwise>
-        <xsl:choose>
-          <xsl:when test="contains($url, '?')">
-            <xsl:value-of select="substring-before($url, '?')"/>
-          </xsl:when>
-          <xsl:otherwise>
-            <xsl:value-of select="$url"/>
-          </xsl:otherwise>
-        </xsl:choose>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-
-</xsl:stylesheet>

configuration

@@ -1,159 +0,0 @@
-# Generated by Kconfiglib (https://github.com/ulfalizer/Kconfiglib)
-
-#
-# BOOK Settings
-#
-# BOOK_LFS is not set
-BOOK_LFS_SYSD=y
-# BOOK_BLFS is not set
-INITSYS="systemd"
-RUN_ME="./jhalfs run"
-BRANCH=y
-# WORKING_COPY is not set
-COMMIT="trunk"
-LFS_MULTILIB_NO=y
-# LFS_MULTILIB_I686 is not set
-# LFS_MULTILIB_X32 is not set
-# LFS_MULTILIB_ALL is not set
-MULTILIB="default"
-BUILD_CHROOT=y
-# BUILD_BOOT is not set
-METHOD="chroot"
-BLFS_TOOL=y
-
-#
-# blfs-tool dependencies
-#
-DEP_LIBXML=y
-DEP_LIBXSLT=y
-DEP_DBXML=y
-DEP_LYNX=y
-DEP_SUDO=y
-DEP_WGET=y
-# DEP_GPM is not set
-DEP_GIT=y
-# end of blfs-tool dependencies
-
-BLFS_BRANCH=y
-# BLFS_WORKING_COPY is not set
-BLFS_COMMIT="trunk"
-BLFS_ROOT="/blfs_root"
-BLFS_XML="blfs-xml"
-LFS_XML="lfs-xml"
-# CUSTOM_TOOLS is not set
-TRACKING_DIR="/var/lib/jhalfs/BLFS"
-# end of BOOK Settings
-
-#
-# General Settings
-#
-LUSER="lfs"
-LGROUP="lfs"
-LHOME="/home"
-BUILDDIR="/mnt/build_dir"
-GETPKG=y
-SRC_ARCHIVE="$SRC_ARCHIVE"
-RETRYSRCDOWNLOAD=y
-RETRYDOWNLOADCNT=20
-DOWNLOADTIMEOUT=30
-SERVER="http://ftp.osuosl.org"
-RUNMAKE=y
-CLEAN=y
-# end of General Settings
-
-#
-# Build Settings
-#
-CONFIG_TESTS=y
-
-#
-# Test settings
-#
-# TST_1 is not set
-TST_2=y
-# end of Test settings
-
-TEST=2
-PKGMNGT=y
-PKG_PACK=y
-# LIB_LOAD is not set
-INSTALL_LOG=y
-STRIP=y
-DEL_LA_FILES=y
-# NO_PROGRESS_BAR is not set
-# end of Build Settings
-
-#
-# System configuration
-#
-# HAVE_FSTAB is not set
-CONFIG_BUILD_KERNEL=y
-CONFIG="$(pwd)/mihari-dev-kernel-config"
-NCURSES5=y
-TIMEZONE="KST"
-LANG="ko_KR.UTF-8"
-FULL_LOCALE=y
-PAGE_LETTER=y
-# PAGE_A4 is not set
-PAGE="letter"
-HOSTNAME="mahiroOS-dev.local"
-
-#
-# Network configuration
-#
-INTERFACE="eth0"
-IP_ADDR="10.0.2.9"
-GATEWAY="10.0.2.2"
-PREFIX="24"
-BROADCAST="10.0.2.255"
-DOMAIN="local"
-DNS1="10.0.2.3"
-DNS2="8.8.8.8"
-# end of Network configuration
-
-#
-# Console configuration
-#
-FONT="lat0-16"
-KEYMAP="us"
-# LOCAL is not set
-# end of Console configuration
-# end of System configuration
-
-#
-# Advanced Features
-#
-REPORT=y
-# SAVE_CH5 is not set
-# COMPARE is not set
-CONFIG_OPTIMIZE=y
-
-#
-# Parallelization and Optimization settings
-#
-N_PARALLEL=12
-OPT_1=y
-# OPT_2 is not set
-# end of Parallelization and Optimization settings
-
-OPTIMIZE=1
-
-#
-# Internal Settings (WARNING: for jhalfs developers only)
-#
-SCRIPT_ROOT="jhalfs"
-JHALFSDIR="$BUILDDIR/$SCRIPT_ROOT"
-LOGDIRBASE="logs"
-LOGDIR="$JHALFSDIR/$LOGDIRBASE"
-TESTLOGDIRBASE="test-logs"
-TESTLOGDIR="$JHALFSDIR/$TESTLOGDIRBASE"
-FILELOGDIRBASE="installed-files"
-FILELOGDIR="$JHALFSDIR/$FILELOGDIRBASE"
-ICALOGDIR="$LOGDIR/ICA"
-MKFILE="$JHALFSDIR/Makefile"
-XSL="lfs.xsl"
-PKG_LST="unpacked"
-# end of Internal Settings (WARNING: for jhalfs developers only)
-# end of Advanced Features
-
-# REBUILD_MAKEFILE is not set

configuration.old

@@ -1,159 +0,0 @@
-# Generated by Kconfiglib (https://github.com/ulfalizer/Kconfiglib)
-
-#
-# BOOK Settings
-#
-# BOOK_LFS is not set
-BOOK_LFS_SYSD=y
-# BOOK_BLFS is not set
-INITSYS="systemd"
-RUN_ME="./jhalfs run"
-BRANCH=y
-# WORKING_COPY is not set
-COMMIT="trunk"
-LFS_MULTILIB_NO=y
-# LFS_MULTILIB_I686 is not set
-# LFS_MULTILIB_X32 is not set
-# LFS_MULTILIB_ALL is not set
-MULTILIB="default"
-BUILD_CHROOT=y
-# BUILD_BOOT is not set
-METHOD="chroot"
-BLFS_TOOL=y
-
-#
-# blfs-tool dependencies
-#
-DEP_LIBXML=y
-DEP_LIBXSLT=y
-DEP_DBXML=y
-DEP_LYNX=y
-DEP_SUDO=y
-DEP_WGET=y
-# DEP_GPM is not set
-DEP_GIT=y
-# end of blfs-tool dependencies
-
-BLFS_BRANCH=y
-# BLFS_WORKING_COPY is not set
-BLFS_COMMIT="trunk"
-BLFS_ROOT="/blfs_root"
-BLFS_XML="blfs-xml"
-LFS_XML="lfs-xml"
-# CUSTOM_TOOLS is not set
-TRACKING_DIR="/var/lib/jhalfs/BLFS"
-# end of BOOK Settings
-
-#
-# General Settings
-#
-LUSER="lfs"
-LGROUP="lfs"
-LHOME="/home"
-BUILDDIR="/mnt/build_dir"
-GETPKG=y
-SRC_ARCHIVE="$SRC_ARCHIVE"
-RETRYSRCDOWNLOAD=y
-RETRYDOWNLOADCNT=20
-DOWNLOADTIMEOUT=30
-SERVER="http://ftp.osuosl.org"
-RUNMAKE=y
-CLEAN=y
-# end of General Settings
-
-#
-# Build Settings
-#
-CONFIG_TESTS=y
-
-#
-# Test settings
-#
-# TST_1 is not set
-TST_2=y
-# end of Test settings
-
-TEST=2
-PKGMNGT=y
-PKG_PACK=y
-# LIB_LOAD is not set
-INSTALL_LOG=y
-STRIP=y
-DEL_LA_FILES=y
-# NO_PROGRESS_BAR is not set
-# end of Build Settings
-
-#
-# System configuration
-#
-# HAVE_FSTAB is not set
-CONFIG_BUILD_KERNEL=y
-CONFIG="$(pwd)/mihari-dev-kernel-config"
-NCURSES5=y
-TIMEZONE="KST"
-LANG="ko_KR.UTF-8"
-FULL_LOCALE=y
-PAGE_LETTER=y
-# PAGE_A4 is not set
-PAGE="letter"
-HOSTNAME="mahiroOS-dev.local"
-
-#
-# Network configuration
-#
-INTERFACE="eth0"
-IP_ADDR="10.0.2.9"
-GATEWAY="10.0.2.2"
-PREFIX="24"
-BROADCAST="10.0.2.255"
-DOMAIN="local"
-DNS1="10.0.2.3"
-DNS2="8.8.8.8"
-# end of Network configuration
-
-#
-# Console configuration
-#
-FONT="lat0-16"
-KEYMAP="us"
-# LOCAL is not set
-# end of Console configuration
-# end of System configuration
-
-#
-# Advanced Features
-#
-REPORT=y
-# SAVE_CH5 is not set
-# COMPARE is not set
-CONFIG_OPTIMIZE=y
-
-#
-# Parallelization and Optimization settings
-#
-N_PARALLEL=12
-OPT_1=y
-# OPT_2 is not set
-# end of Parallelization and Optimization settings
-
-OPTIMIZE=1
-
-#
-# Internal Settings (WARNING: for jhalfs developers only)
-#
-SCRIPT_ROOT="jhalfs"
-JHALFSDIR="$BUILDDIR/$SCRIPT_ROOT"
-LOGDIRBASE="logs"
-LOGDIR="$JHALFSDIR/$LOGDIRBASE"
-TESTLOGDIRBASE="test-logs"
-TESTLOGDIR="$JHALFSDIR/$TESTLOGDIRBASE"
-FILELOGDIRBASE="installed-files"
-FILELOGDIR="$JHALFSDIR/$FILELOGDIRBASE"
-ICALOGDIR="$LOGDIR/ICA"
-MKFILE="$JHALFSDIR/Makefile"
-XSL="lfs.xsl"
-PKG_LST="unpacked"
-# end of Internal Settings (WARNING: for jhalfs developers only)
-# end of Advanced Features
-
-# REBUILD_MAKEFILE is not set

custom/examples/940-libffi

@@ -1,22 +0,0 @@
-PKG="libffi"
-PKG_VERSION="3.2.1"
-PKG_FILE="libffi-3.2.1.tar.gz"
-URL="http://sourceware.org/pub/libffi/${PKG_FILE}"
-MD5="83b89587607e3eb65c70d361f13bab43"
-for i in PATCH{1..10}; do
-   unset $i
-done
-
-( cat << "xEOFx"
-sed -e '/^includesdir/ s/$(libdir).*$/$(includedir)/' \
-    -i include/Makefile.in &&
-
-sed -e '/^includedir/ s/=.*$/=@includedir@/' \
-    -e 's/^Cflags: -I${includedir}/Cflags:/' \
-    -i libffi.pc.in        &&
-
-./configure --prefix=/usr --disable-static &&
-make
-make install
-xEOFx
-) > tmp

custom/examples/941-pcre

@@ -1,28 +0,0 @@
-PKG="pcre"
-PKG_VERSION="8.37"
-PKG_FILE="pcre-8.37.tar.bz2"
-URL="ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/${PKG_FILE}"
-MD5="ed91be292cb01d21bc7e526816c26981"
-for i in PATCH{1..10}; do
-   unset $i
-done
-PATCH1="https://www.linuxfromscratch.org/patches/downloads/pcre/pcre-8.37-upstream_fixes-1.patch 718c4314fba52ed559c75ff7660cc391"
-
-( cat << "xEOFx"
-patch -Np1 -i ../pcre-8.37-upstream_fixes-1.patch &&
-
-./configure --prefix=/usr                     \
-            --docdir=/usr/share/doc/pcre-8.37 \
-            --enable-unicode-properties       \
-            --enable-pcre16                   \
-            --enable-pcre32                   \
-            --enable-pcregrep-libz            \
-            --enable-pcregrep-libbz2          \
-            --enable-pcretest-libreadline     \
-            --disable-static                 &&
-make
-make install                     &&
-mv -v /usr/lib/libpcre.so.* /lib &&
-ln -sfv ../../lib/$(readlink /usr/lib/libpcre.so) /usr/lib/libpcre.so
-xEOFx
-) > tmp

custom/examples/945-python3

@@ -1,22 +0,0 @@
-PKG="python3"
-PKG_VERSION="3.4.3"
-PKG_FILE="Python-3.4.3.tar.xz"
-URL="https://www.python.org/ftp/python/3.4.3/${PKG_FILE}"
-MD5="7d092d1bba6e17f0d9bd21b49e441dd5"
-for i in PATCH{1..10}; do
-   unset $i
-done
-
-( cat << "xEOFx"
-CXX="/usr/bin/g++"              \
-./configure --prefix=/usr       \
-            --enable-shared     \
-            --with-system-expat \
-            --with-system-ffi   \
-            --without-ensurepip &&
-make
-make install &&
-chmod -v 755 /usr/lib/libpython3.4m.so &&
-chmod -v 755 /usr/lib/libpython3.so
-xEOFx
-) > tmp

custom/examples/951-glib

@@ -1,15 +0,0 @@
-PKG="glib"
-PKG_VERSION="2.44.1"
-PKG_FILE="glib-2.44.1.tar.xz"
-URL="http://ftp.gnome.org/pub/gnome/sources/glib/2.44/${PKG_FILE}"
-MD5="83efba4722a9674b97437d1d99af79db"
-for i in PATCH{1..10}; do
-   unset $i
-done
-
-( cat << "xEOFx"
-./configure --prefix=/usr --with-pcre=system &&
-make
-make install
-xEOFx
-) > tmp

custom/examples/952-mc

@@ -1,19 +0,0 @@
-PKG="mc"
-PKG_VERSION="4.8.14"
-PKG_FILE="mc-4.8.14.tar.xz"
-URL="http://ftp.midnight-commander.org/${PKG_FILE}"
-MD5="fbdaddb9edcf8925dcf3231331a8720b"
-for i in PATCH{1..10}; do
-   unset $i
-done
-
-( cat << "xEOFx"
-./configure --prefix=/usr \
-            --sysconfdir=/etc \
-            --with-screen=ncurses \
-            --enable-charset &&
-make
-make install
-cp -v doc/keybind-migration.txt /usr/share/mc
-xEOFx
-) > tmp

custom/examples/960-pppd

@@ -1,23 +0,0 @@
-# The PPP package contains the pppd daemon and the chat program.
-# This is used for connecting to other machines; often for connecting
-# to the Internet via a dial-up or PPPoE connection to an ISP.
-#
-
-PKG="ppp"
-PKG_VERSION="2.4.7"
-PKG_FILE="ppp-${PKG_VERSION}.tar.gz"
-URL="http://samba.org/ftp/ppp/${PKG_FILE}"
-MD5="78818f40e6d33a1d1de68a1551f6595a"
-for i in PATCH{1..10}; do
-   unset $i
-done
-
-( cat << "xEOFx"
-./configure --prefix=/usr &&
-make
-
-make install &&
-make install-etcppp
-
-xEOFx
-) > tmp

custom/examples/961-openssl

@@ -1,34 +0,0 @@
-# The OpenSSL package contains management tools and libraries
-# relating to cryptography. These are useful for providing
-# cryptography functions to other packages, notably OpenSSH,
-# email applications and web browsers (for accessing HTTPS sites).
-#
-
-PKG="openssl"
-PKG_VERSION="1.0.2d"
-PKG_FILE="openssl-${PKG_VERSION}.tar.gz"
-URL="ftp://ftp.openssl.org/source/${PKG_FILE}"
-MD5="38dd619b2e77cbac69b99f52a053d25a"
-for i in PATCH{1..10}; do
-   unset $i
-done
-
-( cat << "xEOFx"
-
-./config --prefix=/usr         \
-         --openssldir=/etc/ssl \
-         --libdir=lib          \
-         shared                \
-         zlib-dynamic &&
-make
-
-#sed -i 's# libcrypto.a##;s# libssl.a##' Makefile
-make MANDIR=/usr/share/man MANSUFFIX=ssl install &&
-install -dv -m755 /usr/share/doc/openssl-1.0.2d  &&
-cp -vfr doc/*     /usr/share/doc/openssl-1.0.2d
-
-#
-# Note: certificates not installed by this.
-#
-xEOFx
-) > tmp

custom/examples/963-gpm

@@ -1,49 +0,0 @@
-PKG="gpm"
-PKG_VERSION="1.20.7"
-PKG_FILE="gpm-${PKG_VERSION}.tar.bz2"
-URL="https://anduin.linuxfromscratch.org/BLFS/gpm/${PKG_FILE}"
-MD5="bf84143905a6a903dbd4d4b911a2a2b8"
-for i in PATCH{1..10}; do
-   unset $i
-done
-PATCH1="https://www.linuxfromscratch.org/patches/blfs/svn/gpm-1.20.7-consolidated-1.patch"
-
-( cat << "xEOFx"
-
-patch -Np1 -i ../gpm-1.20.7-consolidated-1.patch &&
-./autogen.sh                                     &&
-./configure --prefix=/usr --sysconfdir=/etc      &&
-make
-
-make install                                          &&
-
-install-info --dir-file=/usr/share/info/dir           \
-             /usr/share/info/gpm.info                 &&
-
-rm -fv /usr/lib/libgpm.a                              &&
-ln -sfv libgpm.so.2.1.0 /usr/lib/libgpm.so            &&
-install -v -m644 conf/gpm-root.conf /etc              &&
-
-install -v -m755 -d /usr/share/doc/gpm-1.20.7/support &&
-install -v -m644    doc/support/*                     \
-                    /usr/share/doc/gpm-1.20.7/support &&
-install -v -m644    doc/{FAQ,HACK_GPM,README*}        \
-                    /usr/share/doc/gpm-1.20.7
-
-# The normal cmd to install the boot script for gpm
-# --- PUT THIS CMD INSIDE 999-blfs_bootscripts
-#make install-gpm
-
-cat > /etc/sysconfig/mouse << "EOF"
-# Begin /etc/sysconfig/mouse
-
-MDEVICE="/dev/input/mice"
-PROTOCOL="imps2"
-GPMOPTS=""
-
-# End /etc/sysconfig/mouse
-EOF
-
-xEOFx
-) > tmp
-

custom/examples/963-lynx

@@ -1,32 +0,0 @@
-# Lynx is a text based web browser.
-#
-
-PKG="lynx"
-PKG_VERSION="2.8.8rel.2"
-PKG_FILE="lynx${PKG_VERSION}.tar.bz2"
-URL="ftp://lynx.isc.org/${PKG_FILE}"
-MD5="b231c2aa34dfe7ca25681ef4e55ee7e8"
-for i in PATCH{1..10}; do
-   unset $i
-done
-
-( cat << "xEOFx"
-
-./configure --prefix=/usr          \
-            --sysconfdir=/etc/lynx \
-            --datadir=/usr/share/doc/lynx-2.8.8rel.2 \
-            --with-zlib            \
-            --with-bzlib           \
-            --with-screen=ncursesw \
-            --enable-locale-charset &&
-make
-
-make install-full &&
-chgrp -v -R root /usr/share/doc/lynx-2.8.8rel.2/lynx_doc
-
-sed -i 's/#\(LOCALE_CHARSET\):FALSE/\1:TRUE/' /etc/lynx/lynx.cfg
-sed -i 's/#\(DEFAULT_EDITOR\):/\1:vi/' /etc/lynx/lynx.cfg
-sed -i 's/#\(PERSISTENT_COOKIES\):FALSE/\1:TRUE/' /etc/lynx/lynx.cfg
-
-xEOFx
-) > tmp

custom/examples/964-dhcpcd

@@ -1,28 +0,0 @@
-# dhcpcd is an implementation of the DHCP client specified in RFC2131.
-# This is useful for connecting your computer to a network which uses
-# DHCP to assign network addresses.
-#
-
-PKG="dhcpcd"
-PKG_VERSION="6.9.3"
-PKG_FILE="dhcpcd-${PKG_VERSION}.tar.xz"
-URL="http://roy.marples.name/downloads/dhcpcd/${PKG_FILE}"
-MD5="8357d023c4687d27bc6ea7964236b2a6"
-for i in PATCH{1..10}; do
-   unset $i
-done
-
-( cat << "xEOFx"
-
-./configure --libexecdir=/lib/dhcpcd \
-            --dbdir=/var/lib/dhcpcd  &&
-make
-
-make install
-
-# Add the following to boot scripts.
-#make install-service-dhcpcd
-
-# more configuration?
-xEOFx
-) > tmp

custom/examples/997-nasm

@@ -1,22 +0,0 @@
-# NASM (Netwide Assembler) is an 80x86 assembler designed
-# for portability and modularity. It includes a
-# disassembler as well.
-
-PKG="nasm"
-PKG_VERSION="2.11.08"
-PKG_FILE="nasm-${PKG_VERSION}.tar.xz"
-URL="http://www.nasm.us/pub/nasm/releasebuilds/2.11.08/${PKG_FILE}"
-MD5="0d461a085b088a14dd6628c53be1ce28"
-for i in PATCH{1..10}; do
-   unset $i
-done
-
-( cat << "xEOFx"
-
-./configure --prefix=/usr &&
-make
-
-make install
-
-xEOFx
-) > tmp

custom/examples/998-syslinux

@@ -1,32 +0,0 @@
-# SYSLINUX is a collection of boot loaders for the Linux
-# operating system which operates off Linux ext2/3
-# filesystems, MS-DOS FAT filesystems, network servers
-# using PXE firmware, or from CD-ROMs.  The FAT
-# filesystem version can be installed from DOS, NT, or
-# Linux.
-#
-# It includes a sophisticated API for add-on "COM32"
-# modules, including a significant subset of the
-# standard C library.
-#
-# It also includes MEMDISK, a tool to boot legacy
-# operating systems from nontraditional media like PXE
-# or CD-ROM.
-#
-
-PKG="syslinux"
-PKG_VERSION="3.36"
-PKG_FILE="syslinux-$PKG_VERSION}.tar.bz2"
-URL="http://www.kernel.org/pub/linux/utils/boot/syslinux/${PKG_FILE}"
-MD5="d1bfdaa53d31f572f540be55d1480027"
-for i in PATCH{1..10}; do
-   unset $i
-done
-
-( cat << "xEOFx"
-
-make
-make install
-
-xEOFx
-) > tmp

custom/examples/999-blfs_bootscripts

@@ -1,19 +0,0 @@
-PKG="blfs-bootscripts"
-PKG_VERSION="20150924"
-PKG_FILE="blfs-bootscripts-${PKG_VERSION}.tar.bz2"
-URL="http://anduin.linuxfromscratch.org/sources/BLFS/conglomeration/blfs-bootscripts/${PKG_FILE}"
-MD5="97a371743223ac3815bf491863a39c7d"
-for i in PATCH{1..10}; do
-   unset $i
-done
-
-( cat << "xEOFx"
-
-#
-# Insert ALL the blfs bootscripts you want to install
-# EXAMPLE
-#
-make install-gpm
-make install-service-dhcpcd
-xEOFx
-) > tmp

custom/template

@@ -1,25 +0,0 @@
-# Any comments you wish to add
-#
-
-PKG=""
-PKG_VERSION=""
-PKG_FILE=""
-URL=""
-MD5=""
-for i in PATCH{1..10}; do
-   unset $i
-done
-PATCH1=""
-# Up to 10 patches can be added. The PATCH variable must be numbered
-# even if there is only one. If the patch md5 checksum is known, add
-# it after the name as in (quotes are required):
-# PATCHx="patch-url md5"
-
-( cat << "xEOFx"
-# Your script here. Be aware that it is passed
-# verbatim, and that none of the above variables
-# will be defined when running the script. For example,
-# If you want to use ${PKG_VERSION}, you have to
-# redefine it here.
-xEOFx
-) > tmp

extras/do_copy_files

@@ -1,5 +1,5 @@
 #!/bin/bash
-
+# $Id$
 set -e
 
 : <<inline_doc

extras/do_ica_prep

@@ -1,4 +1,5 @@
 #!/bin/bash
+# $Id$
 
 # Acknowledgment:
 #  The following code is a modified version of an original work written by
@@ -42,9 +43,9 @@ if [ ! -f "$CMP_DIR/icaprep" ]; then
   # hackery to allow easy diffing. Essentially, replace each
   # archive with a dir of the same name and extract the object
   # files from the archive into this dir. Despite their names,
-  # libm.a & libmcheck.a are not actual ar archives.
+  # libieee.a & libmcheck.a are not actual ar archives.
   echo -n "Extracting object files from \".a\" files in ${CMP_DIR}... "
-  L=$(find $CMP_DIR -name '*.a' ! -name 'libm.a' ! -name 'libmcheck.a')
+  L=$(find $CMP_DIR -name '*.a' ! -name 'libieee.a' ! -name 'libmcheck.a')
   for F in $L; do
     mv $F ${F}.XX
     mkdir $F

extras/do_ica_work

@@ -1,4 +1,5 @@
 #!/bin/bash
+# $Id$
 
 # Acknowledgment:
 #  The following code is a modified version of an original work written by

extras/farce

@@ -0,0 +1,896 @@
+#!/bin/bash
+
+# Acknowledgment:
+#  The following code is a no-modified version (except for this comment
+#  and the inline_doc fragment) of an original work written by
+#  Ken Moffat and is included here with his permission.
+#
+
+# FARCE: Farce Assists Rebuild Comparison Evaluation ;)
+#
+# to answer the question "can it rebuild itself?"
+#
+#  We expect four arguments - first directory path, filelist
+# containing the files in this directory which we wish to compare,
+# second directory path, filelist for second directory.
+#
+# Yes, we could just compare everything in each tree, but the
+# filelist script knows about files it can reasonably ignore,
+# and this also allows us to build a sytem, boot it and get a
+# list of files, build a full desktop environment, and only then
+# build and boot the "can it build itself" test system and get
+# _its_ filelist.
+#
+# What this script aims to do:
+# ____________________________
+#
+# First, report files not in both builds.
+#
+# Then, confirm symlinks point to same targets.
+#
+# After that, compare individual files -
+#  if different, run the file name through 'expected'
+# to pick out files that are unlikely to match (logs,
+# pids, fstab [assumes '/' is a different device each time],
+# count these as 'expected'.
+#
+# For whatever is left, check the file type - ar archives
+# have their members extraced and compared (every member has
+# a timestamp), gzipped files are compared beyond their
+# timestamp, binaries, at least those using shared libs or
+# which are shared objects, are copied and subjected to
+# --strip-debug.  If files match at this stage, count them as
+# 'accepted'.
+#
+# As a last step for any file that doesn't match, copy it
+# through some perl regexps to "process" it (convert any
+# date, time, kernel-version information from standard formats
+# into tokens, then see if the tokensi match.
+#
+# For details of the regexps, see the tokenize function.
+# Those files that match after this are also counted as
+# 'accepted'.  Note that I don't always start from the kernel
+# version that I'm going to build, so this copes with e.g. perl
+# files that hardcode the kernel version.
+#
+# We now have files that don't match.  A few of these seem to be
+# common to all builds - some (members of) c++ libraries or ar
+# archives, a few programs which perhaps use some sort of c++ code).
+# The file name # is passed to the 'failure' function - these
+# recognized filenames are labelled as 'predictable FAIL:',
+# anything else is labelled as 'unexpected FAIL:'.
+#
+# output:
+# stderr - files only in one of the builds, failure messages,
+#  and totals.
+#
+# farce-results - more details, including which files were treated
+# as expected differences, files where neither copy could be read,
+# files treated as accepted, with the reason (and member for ar
+# archives).  This data is typically up to 100 characters wide -
+# sometimes it's a bit more, but it doesn't wrap too badly in a
+# 100 character xterm.
+#
+# farce-extras - diffs for the files, or members, that didn't
+# match.  This file is to establish new regexps for picking up
+# date/time/kernel-version formats.
+#
+# farce-identical - the names of the files which are identical
+#
+# farce-substitutions - whenever using tokenizeanddiff results in a
+# difference being accepted, for both versions diff the before and
+# after versions to show what got changed.  If the file is a binary,
+# the output may still be hard to read.  Note that I _know_ glibc
+# version strings pass one of the regexps looking for a kernel version
+# - since I expect you to use the same version of glibc for each
+# build, this is not a problem.
+#
+# farce-differ - the names of the files which could not be treated
+# as matching (whether or not I regard the failure as predictable)
+# for possible input to ICA processing.
+#
+# Copyright (C) 2005, 2006 Ken Moffat <ken@linuxfromscratch.org>
+#
+# All rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or (at
+# your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+# NON INFRINGEMENT.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+#
+
+: <<inline_doc
+    desc:       do farce analisys and report
+    usage:      farce -directory $FARCELOGDIR/dir path1 list1 path2 list2
+    input vars: $1 farce log dir for this comparation
+                $2 full path to previous iteration
+                $3 full path to filelist for previos iteration
+                $4 full path to current iteration
+                $5 full path to filelist for current iteration
+    externals:  --
+    modifies:   --
+    returns:    --
+    on error:
+    on success:
+inline_doc
+
+
+VERSION="002"
+
+# variables for output files
+RESULT=farce-results
+EXTRAS=farce-extras
+IDENTICAL=farce-identical
+SUBS=farce-substitutions
+DIFFER=farce-differ
+
+# documenting the variables
+# C1, C2	temp files to hold disassembled code
+# D1, D2	temp directories for extracting member of ar archive
+# DIFF		temp file for diffing the filelists
+# F1, F2	temp files for tokenizeanddiff
+# FTYPE		obsolete, commented out
+# M1, M2	temp files to hold members of an ar archive
+# MEMBERS	temp file to list members of ar archive
+# OP1, OP2	the original $PWD, needed when extracting members of ar
+#		archives
+# P1, P2	paths to first and second build
+# S1, S2	temp files for shared objects
+
+# functions
+function dohelp() {
+	echo "`basename $0`: compare trees of files from a build"
+	echo "and lists of the files they contained"
+	echo ""
+	echo "`basename $0` [ -help | -version ] || path1 list1 path2 list2"
+}
+
+function emessage() {
+	# write a string to both stderr and $RESULT
+	echo "$@" >&2
+	echo "$@" >&5
+}
+
+function expected() {
+	# if we expect it to differ because of its name,
+	# allow it and report, return true ; else return false
+	case $1 in
+	/boot/grub/menu.lst)
+		# just in case somebody puts this into the main filesystem
+		true;;
+	/etc/aliases.db)
+		# some sort of database for postfix, not parsable
+		true;;
+	/etc/blkid.tab)
+		# includes dev name for rootfs
+		true;;
+	/etc/fstab)
+		# fstab, e.g. ' / ' will differ
+		true;;
+	/etc/group*)
+		true;;
+	/etc/hosts)
+		# with dhcp client, I add current ip address to this in a hook
+		true;;
+	/etc/ld.so.*)
+		# .conf and .cache can vary,
+		# particularly if one system has a full build when I run this
+		true;;
+	/etc/lilo.conf|/etc/yaboot.conf)
+		# bootloader control, I assume grub will all be on a separate
+		true;;
+	/etc/mtab)
+		# at a minimum, different '/'
+		true;;
+	/etc/ntp.drift)
+		true;;
+	/etc/passwd*)
+		true;;
+	/etc/shadow*)
+		true;;
+	/etc/ssh/*key|/etc/ssh/*pub)
+		# openssh keys
+		true;;
+	/misc/*)
+		# where I put buildscripts (which mostly won't change)
+		# and stamps containing name/time/space which will differ in the times
+		true;;
+	/root/*)
+		# expect .bash_history etc to differ - if we can read them
+		true;;
+	/usr/bin/lynx)
+		# part of my inital builds, I guess this uses anonymous namespaces
+		true;;
+	/usr/include/c++/*/*/bits/stdc++.h.gch/*)
+		# precompiled headers
+		true;;
+	/usr/lib*/libstdc++.a|/usr/lib*/libstdc++.so*|/usr/lib*/libsupc++.a)
+		# probably, anonymous namespaces
+		# libstdc++.a, libstdc++.so.n.n.n, libsupc++.a
+		true;;
+	/usr/share/info/dir)
+		# if one system has had extra stuff built, this will likely be bigger
+		true;;
+	/usr/share/man/whatis)
+		# if one system has had extra stuff built, this will likely be bigger
+		true;;
+	/var/lib/locate/locatedb)
+		# if one system has had extra stuff built, this will likely be bigger
+		true;;
+	/var/lib/nfs/*)
+		# allow nfs bookkeeping
+		true;;
+	/var/log/*)
+		true;;
+	/var/run/utmp)
+		true;;
+	/var/spool/fcron*)
+		true;;
+	/var/state/*)
+		# allow dhcp leases
+		true;;
+	/var/tmp/random-seed)
+		true;;
+	# following start with wildcards
+	*Image*|*.PPCBoot*|*vmlinuz*|*lfskernel*)
+		# compressed kernels, sometimes just building at a different
+		# date/time is enough to change the length of them, because the
+		# long format date and time is part of the compressed data
+		true;;
+	*pid*)
+		# pids, including e.g. /var/spool/postfix/pid/*
+		true;;
+	*)
+		# nothing else is expected to be different
+		false;;
+	esac
+	if [ $? -eq 0 ]; then
+		message "expected difference in $1"
+		let expected=$expected+1
+		case $TYPE in
+			AR)
+				let EXPAR=$EXPAR+1
+				;;
+			ELF)
+				let EXPELF=$EXPELF+1
+				;;
+			UNK)
+				let EXPUNK=$EXPUNK+1
+				;;
+			# so far, no other valid types, so don't accumulate them
+			*)
+				emessage "internal error, expected difference for $1 of type $TYPE not allowed"
+				exit 2
+				;;
+		esac
+		true
+	else
+		false
+	fi
+}
+
+function failure() {
+	# first parm is filename or token
+	# second parm is the error message
+	# update the appropriate total
+	# and write to both stderr and the results
+	# by using emessage
+
+	let different=$different+1
+	case $TYPE in
+		AR)
+			let DIFAR=$DIFAR+1
+			;;
+		ELF)
+			let DIFELF=$DIFELF+1
+			;;
+		GZ)
+			let DIFGZ=$DIFGZ+1
+			;;
+		SYM)
+			let DIFSYM=$DIFSYM+1
+			;;
+		UNK)
+			let DIFUNK=$DIFUNK+1
+			;;
+		*)
+			emessage "internal error in failure() for TYPE $TYPE"
+			exit 2
+			;;
+		esac
+		test -f ${P1}$1 && echo $1 >&9
+		emessage "FAIL: $2"
+}
+
+function fatal() {
+	# unrecoverable error
+	echo $*
+	exit 1
+}
+
+function filetype() {
+	TYPE=`file ${P1}${FILE}`
+	case $TYPE in
+	*'current ar archive'*)
+		let TOTAR=$TOTAR+1
+		TYPE=AR
+		;;
+	*' ELF '*)
+		let TOTELF=$TOTELF+1
+		TYPE=ELF
+		;;
+	*'gzip compressed data'*)
+		let TOTGZ=$TOTGZ+1
+		TYPE=GZ
+		;;
+	*)
+		let TOTUNK=$TOTUNK+1
+		TYPE=UNK
+		;;
+	esac
+}
+
+function message() {
+	# write a string to $RESULT
+	echo $* >&5
+}
+
+function onlyone() {
+	#report files only in one build
+	# text should go to both stderr and the results,
+	# but blank lines only go to the results
+	if [ $1 == '<' ]; then
+		emessage "File(s) only in the first build"
+	else
+		emessage "File(s) only in the second build"
+	fi
+	message ""
+	FILES=`cat $DIFF | grep "^$1" | cut -d ' ' -f 2`
+	for F in $FILES; do
+		emessage $F
+		let only=$only+1
+	done
+	message ""
+}
+
+# 'test' functions are called with three arguments:
+# the two pathes and the filename
+# - we know the file is of this type, so see if we
+# can get it to match by reasonalbe means.
+# if not, treat it as different.
+#
+# NB if pathes are absolute, we need to prefix them
+# with the original $PWD to access the .a files
+#
+function testar() {
+	# ar archives include timestamps for the members,
+	# but diff doesn't show file timestamps unless the data differs
+	# put out a message to help locate which archive any messages
+	# about the members refer to.
+
+	# try just stripping them U1,2 undebuggable
+	U1=`mktemp` || fatal "cannot create a temporary file"
+	U2=`mktemp` || fatal "cannot create a temporary file"
+	cp ${1}${3} $U1
+	cp ${2}${3} $U2
+	strip --strip-debug $U1
+	strip --strip-debug $U2
+	cmp -s $U1 $U2
+	rm $U1 $U2
+	if [ $? -eq 0 ]; then
+		let accepted=$accepted+1
+		let ACCAR=$ACCAR+1
+		message "archive $3 matches after strip --strip-debug"
+		return
+	fi
+	# rest of this function retained primarily for pathologically bad builds
+	# put out a message in the log to help identify which archive has issues.
+	message "examining ar archive $3"
+	D1=`mktemp -d` || fatal "cannot create a temporary directory"
+	D2=`mktemp -d` || fatal "cannot create a temporary directory"
+	cd $D1
+	ar -x ${OP1}${1}${3}
+	cd $D2
+	ar -x ${OP2}${2}${3}
+	cd
+	# diff the members - true means they match
+	diff -Na $D1 $D2 >/dev/null
+	if [ $? -eq 0 ]; then
+		message "accept: $3 after diffing the members"
+		let accepted=$accepted+1
+		let ACCAR=$ACCAR+1
+	else
+		# process individual members to eliminate date/time/kernel-version
+		# first, check the members are the same
+		M1=`mktemp` || fatal "cannot create a temporary file"
+		M2=`mktemp` || fatal "cannot create a temporary file"
+		cd $D1
+		MEMBERS=
+		for F in *; do
+			MEMBERS="$MEMBERS $F"
+		done
+		cd
+		echo $MEMBERS | sort >$M1
+		cd $D2
+		MEMBERS=
+		for F in *; do
+			MEMBERS="$MEMBERS $F"
+		done
+		cd
+		echo $MEMBERS | sort >$M2
+		cmp -s $M1 $M2
+		if [ $? -ne 0 ]; then
+			# oh dear, different members
+			echo "list of members differs for archive $3" >&6
+			diff $M1 $M2 >&6
+			failure $3 "$3 list of members differs"
+		else
+			# members (names) are same,
+			# process each one
+			STATUS=0
+			for M in $MEMBERS; do
+				#avoid firing up perl on matching members
+				cmp -s $D1/$M $D2/$M
+				if [ $? -ne 0 ]; then
+					tokenizeanddiff $D1/$M $D2/$M $FILE:$M
+					if [ $? -eq 0 ]; then
+						message "member $M matches after processing"
+					else
+						message "member $M DIFFERS after processing"
+						STATUS=1
+					fi
+				fi
+			done
+			if [ $STATUS -eq 0 ]; then
+				let accepted=$accepted+1
+				let ACCAR=$ACCAR+1
+			else
+				let different=$different+1
+				let DIFAR=$DIFAR+1
+				echo $3 >&9
+				emessage "FAIL: in $3"
+			fi
+		fi
+		rm $M1 $M2
+	fi
+	rm -rf $D1 $D2
+}
+
+function testgzip() {
+	# bytes 4,5,6,7 are the timestamp, so ignore these
+	cmp -s -i 8 ${1}${3} ${2}${3}
+	if [ $? -eq 0 ]; then
+		message "accept: $3 after ignoring gzip timestamp"
+		let accepted=$accepted+1
+		let ACCGZ=$ACCGZ+1
+	else
+		failure $3 " $3 even after ignoring gzip timestamp"
+	fi
+}
+
+function testso() {
+	# shared object - first try stripping it
+	# in fact, this now handles ALL ELF files
+	S1=`mktemp` || fatal "cannot create a temporary file"
+	S2=`mktemp` || fatal "cannot create a temporary file"
+	cp ${1}${3} $S1
+	strip --strip-debug $S1
+	cp ${2}${3} $S2
+	strip --strip-debug $S2
+	cmp -s $S1 $S2
+	if [ $? -eq 0 ]; then
+		message "accept: $3 after --strip-debug"
+		let accepted=$accepted+1
+		let ACCELF=$ACCELF+1
+	else
+		tokenizeanddiff $S1 $S2 $3
+		if [ $? -ne 0 ]; then
+			failure $3 " $3 differs after stripping and processing"
+		else
+			message "accept: $3 after --strip-debug and processing"
+			let accepted=$accepted+1
+			let ACCELF=$ACCELF+1
+		fi
+	fi
+	rm $S1 $S2
+}
+
+function tokenize() {
+	# use regexes to replace date/time/kernel-version text
+	# with tokens which may allow files to match even though
+	# they have hardcoded date/time/kernel-version.
+	# arguments are file to process, and where to put it.
+	# these regexes are somewhat long, and the order they
+	# are applied in is important (to stop short ones being
+	# used when a longer version would match).
+	# KV00 linux version date (e.g. as in the kernel itself)
+	# allow 2 or 3 groups of three alphas here - optional smp,  with day, mon
+	# KV01 kernel version, including possible cpu details (that is for cdda2wav)
+	# KV02 just the version, in quotes e.g. "2.6.12.6" or '2.6.13', for perl stuff
+	# except that "|' gives me grif, so try a boundary
+	# also, it might need local version on the end, I really want
+	# quote2.\d+.\d+.{0,32}quote - it is the quotes that don't work.
+	# DT00 Day Mon .d+ hh:mm:ss TZN CCYY variations include non-caps and 'mon d'
+	# DT01 Mon .d+ CCYY hh:mm:ss
+	# DT02 hh:mm:ss Mon .d CCYY
+	# DT03 Mon .d CCYY
+	# DT04 Day Mon { ,d}d hh:mm:ss CCYY - for groff example postscript files
+	# (somewhat similar to DT00, but '  d' or ' dd' for day of month and no TZN )
+	# DT05 hh:mm:ss
+	# DT06 ISO date using space as separator
+	# DT07 ISO date using dash as separator
+	# DT08 ISO date using slash as separator
+	# DT09 fullmonth (capitalised), day number, comma, 4-digit year (groff 1.18.1 ps)
+	# DT10 dd, fullmonth (capitalised), 4-digit year (groff 1.18.1 manpages)
+	# DT11 '(xample comma space digit(s) backslash ) in groff memef.ps which is
+	# quite clearly the day of the month when it was compiled, preceded by 'example'
+	# with something weird between the e and the x.
+
+	if [ $# -ne 2 ]; then
+		fatal "tokenizing called with $# arguments : $*"
+	fi
+
+	cat $1 | perl -p \
+	 -e 's/(L|l)inux.*\d\.\d\.\d+.* \#\d+( [A-Za-z][a-z]{2}){2,3} \d+ \d\d:\d\d:\d\d [A-Za-z]{3} \d{4}\b/%KV00%/g;' \
+	 -e 's/(L|l)inux( (\w|_)+)?(-| |_)\d\.\d(\.\d+){1,2}((-|_)?(\w|_)+)?( |\000)*/%KV01%/g;' \
+	 -e 's/\W2(\.\d+){2,3}(-|_)?((\w|_)+)?\s*\W/%KV02%/g;' \
+	 -e 's/\b([A-Za-z][a-z]{2} ){2}( |\d)?\d \d\d:\d\d:\d\d [A-Za-z]{3} \d{4}\b/%DT00%/g;' \
+	 -e 's/\b[A-Z][a-z]{2} ( |\d)\d \d{4} \d\d:\d\d:\d\d\b/%DT01%/g;' \
+	 -e 's/\b\d\d:\d\d:\d\d [A-Z][a-z]{2} ( |\d)\d \d{4}\b/%DT02%/g;' \
+	 -e 's/\b[A-Z][a-z]{2} ( |\d)\d \d{4}\b/%DT03%/g;' \
+	 -e 's/\b([A-Z][a-z]{2} ){2}( |\d)\d \d\d:\d\d:\d\d \d{4}/%DT04%/g;' \
+	 -e 's/\b\d\d:\d\d:\d\d\b/%DT05%/g;' \
+	 -e 's/\b\d{4} \d\d \d\d\b/%DT06%/g;' \
+	 -e 's/\b\d{4}-\d\d-\d\d\b/%DT07%/g;' \
+	 -e 's/\b\d{4}\/\d\d\/\d\d\b/%DT08%/g;' \
+	 -e 's/\b[A-Z][a-z]{2,} \d{1,2}, \d{4}/%DT09%/g;' \
+	 -e 's/\b\d\d [A-Z][a-z]{2,} \d{4}/%DT10%/g;' \
+	 -e 's/\(xample, \d{1,2}\\\)/%DT11%/g;' \
+	>$2
+}
+
+function tokenizeanddiff() {
+	# Call tokenize for the inputs, then compare the results
+	# Input arguments are path/filename for old and new versions
+	# third parm is readable name (filename, or archivename:member)
+	# to help understand what is in the extras output.
+	#  - sometimes called for files, but other times called for
+	# members of ar archives extracted into temporary directories
+	#message tokenizeanddiff called for $1 $2 $3
+	F1=`mktemp` || fatal "cannot create a temporary file"
+	F2=`mktemp` || fatal "cannot create a temporary file"
+	tokenize $1 $F1
+	tokenize $2 $F2
+
+	# actually, cmp is probably more efficient
+	# but for picking up the pieces it will be better to
+	# use diff to see what got through.
+	cmp -s $F1 $F2
+	TOKENRESULT=$?
+	if [ $TOKENRESULT -ne 0 ]; then
+		echo "failure in $3..." >&6
+		diff -a $F1 $F2 >&6
+		rm $F1 $F2
+		false
+	else
+		# show what we did
+		echo "substitutions for $3" >&8
+		echo "build one" >&8
+		diff -a $1 $F1 >&8
+		echo "build two" >&8
+		diff -a $2 $F2 >&8
+		rm $F1 $F2
+		true
+	fi
+}
+
+function validateargs() {
+# validate the arguments
+BAD=0
+if ! [ -d $1 ]; then
+	echo "Error: first argument is not a directory" >&2
+	let BAD=$BAD+1
+fi
+NAME=`basename ${2%%-*}`
+if [ $NAME != filelist ]; then
+	echo "Error: second argument is not a recognized filelist" >&2
+	let BAD=$BAD+1
+fi
+if ! [ -d $3 ]; then
+	echo "Error: third argument is not a directory" >&2
+	let BAD=$BAD+1
+fi
+NAME=`basename ${4%%-*}`
+if [ $NAME != filelist ]; then
+	echo "Error: fourth argument is not a recognized filelist" >&2
+	let BAD=$BAD+1
+fi
+for I in $1 $2 $3 $4; do
+	if ! [ -r $I ]; then
+		echo "Error: cannot read $I" >&2
+		let BAD=$BAD+1
+	fi
+done
+if [ $1 == $3 ]; then
+	echo "Error: directory pathes are identical" >&2
+	let BAD=$BAD+1
+fi
+if [ $2 == $4 ]; then
+	echo "Error: filelist names are identical" >&2
+	let BAD=$BAD+1
+fi
+if [ $BAD -eq 0 ]; then
+	ARGS=valid
+fi
+}
+
+# Mainline
+ARGS=unproven
+OUTDIR=
+if [ $# -eq 1 ]; then
+	case $1 in
+		-version|--version)
+			echo "`basename $0` version $VERSION"
+			exit 0
+			;;
+		-help|--help)
+			dohelp
+			exit 0
+			;;
+	esac
+fi
+if [ $1 = "--directory" ]; then
+	OUTDIR=$2
+	shift 2
+	grep '/$' $OUTDIR >/dev/null 2>&1 || OUTDIR=`echo $OUTDIR | sed 's%$%/%'`
+	echo "creating directory $OUTDIR"
+	mkdir -p $OUTDIR
+	if [ $? -ne 0 ]; then
+		echo "cannot mkdir $OUTDIR"
+		exit 1
+	fi
+fi
+if [ $# -eq 4 ]; then
+	validateargs $*
+fi
+if ! [ $ARGS == valid ]; then
+	dohelp
+	fatal "`basename $0`: error in arguments"
+fi
+
+# ok, we're happy, lets hit these files
+exec 5>${OUTDIR}$RESULT
+exec 6>${OUTDIR}$EXTRAS
+exec 7>${OUTDIR}$IDENTICAL
+exec 8>${OUTDIR}$SUBS
+exec 9>${OUTDIR}$DIFFER
+
+>${OUTDIR}$RESULT
+if [ $? -ne 0 ]; then
+	fatal "cannot write to ${OUTDIR}$RESULT"
+fi
+
+emessage "will compare:"
+emessage " first build at $1 with files listed in $2"
+emessage "second build at $3 with files listed in $4"
+
+let accepted=0
+let different=0
+let expected=0
+let matched=0
+let only=0
+let predictable=0
+let unreadable=0
+let total=0
+
+# break down the accepted
+let ACCAR=0
+let ACCELF=0
+let ACCGZ=0
+let ACCUNK=0
+
+# break down definitely different
+let DIFAR=0
+let DIFELF=0
+let DIFGZ=0
+let DIFSYM=0
+let DIFUNK=0
+
+# break down the expected differences
+let EXPAR=0
+let EXPELF=0
+let EXPGZ=0
+let EXPUNK=0
+
+# break down the identical files
+let MATAR=0
+let MATELF=0
+let MATGZ=0
+let MATSYM=0
+let MATUNK=0
+
+# break down how many of each type
+let TOTAR=0
+let TOTELF=0
+let TOTGZ=0
+let TOTSYM=0
+let TOTUNK=0
+
+# now identify differences between the two trees
+DIFF=`mktemp` || fatal "cannot create a temporary file"
+diff $2 $4 >$DIFF
+
+for RUN in '<' '>' ; do
+	grep -q "$RUN" $DIFF && onlyone "$RUN"
+done
+
+rm $DIFF
+
+# and compare them
+message "Results of file comparison:"
+message ""
+
+# Strip any trailing slash from the path for tidyness,
+# because the filenames all start with a slash.  Unfortunately,
+# unfortunately, '/' becomes empty, which breaks subroutines,
+# so special case it.
+# also, to process ar archives we need to extract them in temp
+# directories - that means that after cd'ing we've broken any
+# relative path, so save original pwd as necessary.
+P1=`echo $1 | sed 's%/$%%'`
+echo $1 | grep '^/' >/dev/null
+if [ $? -ne 0 ]; then
+	# relative path
+	OP1=${PWD}/
+	#echo "setting OP1 to $OP1"
+else
+	OP1=
+	#echo "$1 is an absolute path"
+fi
+test -z "$P1" && P1='/'
+P2=`echo $3 | sed 's%/$%%'`
+echo $3 | grep '^/' >/dev/null
+if [ $? -ne 0 ]; then
+	# relative path
+	OP2=${PWD}/
+	#echo "setting OP2 to $OP2"
+else
+	OP2=
+	#echo "$3 is an absolute path"
+fi
+test -z "$P2" && P2='/'
+
+echo "about to read $2"
+while read FILE ; do
+#echo "process $FILE"
+#echo "test existence of ${P2}${FILE}"
+	# confirm it exists in second build
+	# we have already reported files only in one build
+	if [ -f ${P2}"${FILE}" ]; then
+		let total=$total+1
+		# check we can read both of them
+		# or count as unreadable - I used to separate only-one-unreadable,
+		# but if you compre '/' and a _copy_  of /mnt/lfs that assumption
+		# breaks, so be less picky.
+		if ! [ -r "${P1}${FILE}" ] || ! [ -r "${P2}${FILE}" ]; then
+			message "cannot read one or both versions of $FILE"
+			let unreadable=$unreadable+1
+			continue
+		fi
+		if [ -h "${P1}${FILE}" ]; then
+			# for symlink, look at what it points to
+			# exceptionally, do not call filetype
+			TYPE=SYM
+			let TOTSYM=$TOTSYM+1
+			SL1=`ls -l "${P1}${FILE}" | awk '{ print $11 }'`
+			SL2=`ls -l "${P2}${FILE}" | awk '{ print $11 }'`
+			if [ "$SL1" = "$SL2" ]; then
+				echo "symlink $FILE matches for $SL1" >&5
+				let matched=$matched+1
+				let MATSYM=$MATSYM+1
+			else
+				failure TARGET " symlink $FILE points to $SL1 and $SL2"
+				echo $FILE >&9
+			fi
+		else
+			# regular file, start by typing it for accounting,
+			# then compare it
+			filetype ${P1}${FILE}
+			cmp -s "${P1}${FILE}" "${P2}${FILE}"
+			if [ $? -eq 0 ]; then
+				let matched=$matched+1
+				case $TYPE in
+					AR)
+						let MATAR=$MATAR+1
+						;;
+					ELF)
+						let MATELF=$MATELF+1
+						;;
+					GZ)
+						let MATGZ=$MATGZ+1
+						;;
+					UNK)
+						let MATUNK=$MATUNK+1
+						;;
+					*)
+						echo "unexpected TYPE of $TYPE for $FILE" >&2
+						exit 2
+						;;
+				esac
+				echo ${FILE} >&7
+			else
+				# seems different, can we do better ?
+				# test if we expect it to differ
+				expected $FILE
+				if [ $? -ne 0 ]; then
+					case $TYPE in
+					GZ)
+						testgzip $P1 $P2 $FILE ;;
+					AR)
+						testar $P1 $P2 $FILE ;;
+					ELF)
+						testso $P1 $P2 $FILE ;;
+					*)
+						# long-stop - strip dates from text files
+						tokenizeanddiff "${P1}${FILE}" "${P2}${FILE}" "$FILE"
+						if [ $? -eq 0 ]; then
+							message "accepted $FILE after processing"
+							let accepted=$accepted+1
+							let ACCUNK=$ACCUNK+1
+						else
+							failure "$FILE" " $FILE is different"
+						fi
+						;;
+					esac
+				fi
+			fi
+		fi
+	fi
+done < $2
+
+message ""
+# write totals to stderr as well as the results file
+emessage "$only files in only one of the builds"
+emessage "$total files compared, of which"
+emessage "$unreadable files could not be read, skipped"
+emessage "$matched files are identical"
+emessage "$expected files differed as expected"
+emessage "$accepted files had allowable differences"
+#emessage "$predictable files differed as they normally do"
+emessage "$different files differed"
+
+# totals of different file types
+emessage ""
+emessage "$TOTAR ar archives"
+emessage " of which $MATAR are identical"
+emessage " of which $ACCAR are accepted after strip-debug or extracting, diffing, tokenizing"
+emessage " of which $EXPAR differed as expected"
+emessage "    of which $DIFAR differed"
+emessage "$TOTELF ELF executables or shared libraries"
+emessage " of which $MATELF are identical"
+emessage " of which $ACCELF are accepted after stripping and tokenizing"
+emessage " of which $EXPELF differed as expected"
+emessage "    of which $DIFELF differed"
+emessage "$TOTGZ gzipped files"
+emessage " of which $MATGZ are identical"
+emessage " of which $ACCGZ are accepted after comparing beyond timestamp"
+emessage " of which $DIFGZ are different"
+emessage "$TOTSYM symbolic links"
+emessage " of which $MATSYM are identical"
+emessage "    of which $DIFSYM have different targets"
+emessage "$TOTUNK other files"
+emessage " of which $MATUNK are identical"
+emessage " of which $ACCUNK are accepted after tokenizing"
+emessage " of which $EXPUNK differed as expected"
+emessage "    of which $DIFUNK differed"
+

extras/filelist

@@ -0,0 +1,60 @@
+#!/bin/bash
+#$Id$
+
+# Acknowledgment:
+#  The following code is a modified version of an original work written by
+#  Ken Moffat for their "farce" project and is included here with his
+#  permission.
+#
+
+set -e
+
+: <<inline_doc
+    desc:       creates farce file lists
+    usage:      filelist $DEST_FARCE/$ITERATION $DEST_FARCE/$ITERATION.filelist
+    input vars: $1 directory where files from current iteration are stored
+                $2 name of the file list to be created
+    externals:  --
+    modifies:   --
+    returns:    --
+    on error:
+    on success:
+inline_doc
+
+if [ $# -eq 2 ]; then
+  OUTFILE=$2
+  if [ -e $2 ]; then
+    echo -e "\nOutput $2 already exists\n"
+    exit
+  fi
+else
+  echo -e "\nMissing argument\n"
+  exit 2
+fi
+
+if [ "$1" == "/" ]; then
+  LOC=$1
+else
+  # ensure the path or mountpoint ends with a slash
+  # because of the seds after the 'find'
+  LOC=`echo $1 | sed 's%[^/]$%&/%'`
+fi
+
+echo -en "\nCreating file list for farce amalysis in $OUTFILE ..."
+if [ -f $OUTFILE ]; then
+  echo "refusing to overwrite $OUTFILE"
+  exit 1
+fi
+
+# check we can indeed do this
+>$OUTFILE
+if [ $? -ne 0 ]; then
+  echo "error, cannot write to $OUTFILE"
+  exit 1
+fi
+
+find $LOC -xdev -xtype f | sed "s%^${LOC}%/%" | sort >$OUTFILE
+
+echo -e "done.\n"
+
+exit

install-blfs-tools.sh

@@ -1,184 +0,0 @@
-#!/bin/bash
-
-set -e
-
-: << inline_doc
-Installs a set-up to build BLFS packages.
-You can set these variables:
-TRACKING_DIR  : where the installed package file is kept.
-                (default /var/lib/jhalfs/BLFS)
-INITSYS       : which books do you want? 'sysv' or 'systemd' (default sysv)
-BLFS_ROOT     : where the installed tools will be installed, relative to $HOME.
-                Must start with a '/' (default /blfs_root)
-BLFS_COMMIT   : any commit (branch/tag/sha)
-                (default trunk)
-LFS_COMMIT    : any commit (branch/tag/sha)
-                (default trunk)
-Examples:
-1 - If you plan to use the tools to build BLFS on top of LFS, but you did not
-use jhalfs, or forgot to include the jhalfs-blfs tools:
-(as root) mkdir -p /var/lib/jhalfs/BLFS && chown -R <user> /var/lib/jhalfs
-(as user) INITSYS=<your system> ./install-blfs-tools.sh
-2 - To install with only user privileges (default to sysv):
-TRACKING_DIR=$HOME/blfs_root/trackdir ./install-blfs-tools.sh
-
-This script can also be called automatically after running make in this
-directory. The parameters will then be taken from the configuration file.
-inline_doc
-
-
-# VT100 colors
-declare -r  BLACK=$'\e[1;30m'
-declare -r  DK_GRAY=$'\e[0;30m'
-
-declare -r  RED=$'\e[31m'
-declare -r  GREEN=$'\e[32m'
-declare -r  YELLOW=$'\e[33m'
-declare -r  BLUE=$'\e[34m'
-declare -r  MAGENTA=$'\e[35m'
-declare -r  CYAN=$'\e[36m'
-declare -r  WHITE=$'\e[37m'
-
-declare -r  OFF=$'\e[0m'
-declare -r  BOLD=$'\e[1m'
-declare -r  REVERSE=$'\e[7m'
-declare -r  HIDDEN=$'\e[8m'
-
-declare -r  tab_=$'\t'
-declare -r  nl_=$'\n'
-
-declare -r   DD_BORDER="${BOLD}==============================================================================${OFF}"
-declare -r   SD_BORDER="${BOLD}------------------------------------------------------------------------------${OFF}"
-declare -r STAR_BORDER="${BOLD}******************************************************************************${OFF}"
-declare -r dotSTR=".................." # Format display of parameters and versions
-
-# bold yellow > <  pair
-declare -r R_arrow=$'\e[1;33m>\e[0m'
-declare -r L_arrow=$'\e[1;33m<\e[0m'
-VERBOSITY=1
-
-# Take parameters from "configuration" if $1="auto"
-if [ "$1" = auto ]; then
-  [[ $VERBOSITY > 0 ]] && echo -n "Loading configuration ... "
-  source configuration
-  [[ $? > 0 ]] && echo -e "\nconfiguration could not be loaded" && exit 2
-  [[ $VERBOSITY > 0 ]] && echo "OK"
-fi
-
-if [ "$BOOK_BLFS" = y ]; then
-## Read variables and sanity checks
-  [[ "$BRANCH" = y ]] && BLFS_COMMIT=$COMMIT
-  [[ "$WORKING_COPY" = y ]] && BLFS_BOOK=$BOOK
-  [[ "$BOOK" = "**EDIT ME**" ]] &&
-    echo You have not set the BLFS working copy location && exit 1
-  [[ "$LFS_BRANCH" = y ]] && LFS_COMMIT=$BLFS_LFS_COMMIT
-  [[ "$LFS_WORKING_COPY" = y ]] && LFS_BOOK=$BLFS_LFS_BOOK
-  [[ "$LFS_BOOK" = "**EDIT ME**" ]] &&
-    echo You have not set the LFS working copy location && exit 1
-fi
-
-COMMON_DIR="common"
-# blfs-tool envars
-BLFS_TOOL='y'
-BUILDDIR=$(cd ~;pwd)
-BLFS_ROOT="${BLFS_ROOT:=/blfs_root}"
-TRACKING_DIR="${TRACKING_DIR:=/var/lib/jhalfs/BLFS}"
-INITSYS="${INITSYS:=sysv}"
-BLFS_COMMIT=${BLFS_COMMIT:=trunk}
-LFS_COMMIT=${LFS_COMMIT:=trunk}
-BLFS_XML=${BLFS_XML:=blfs-xml}
-LFS_XML=${LFS_XML:=lfs-xml}
-
-# Validate the configuration:
-PARAMS="BLFS_ROOT TRACKING_DIR INITSYS BLFS_XML LFS_XML"
-if [ "$WORKING_COPY" = y ]; then
-  PARAMS="$PARAMS WORKING_COPY BLFS_BOOK"
-else
-  PARAMS="$PARAMS BLFS_COMMIT"
-fi
-if [ "$LFS_WORKING_COPY" = y ]; then
-  PARAMS="$PARAMS LFS_WORKING_COPY LFS_BOOK"
-else
-  PARAMS="$PARAMS LFS_COMMIT"
-fi
-# Format for displaying parameters:
-declare -r PARAM_VALS='${config_param}${dotSTR:${#config_param}} ${L_arrow}${BOLD}${!config_param}${OFF}${R_arrow}'
-
-for config_param in $PARAMS; do
-  echo -e "`eval echo $PARAM_VALS`"
-done
-
-echo "${SD_BORDER}${nl_}"
-echo -n "Are you happy with these settings? yes/no (no): "
-read ANSWER
-if [ x$ANSWER != "xyes" ] ; then
-  echo "${nl_}Rerun make and fix your settings.${nl_}"
-  exit
-fi
-[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
-
-#*******************************************************************#
-[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_check_version.sh> ..."
-source $COMMON_DIR/libs/func_check_version.sh
-[[ $? > 0 ]] && echo " function module did not load.." && exit 2
-[[ $VERBOSITY > 0 ]] && echo " OK"
-
-[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
-
-# Check for build prerequisites.
-echo
-  check_alfs_tools
-echo "${SD_BORDER}${nl_}"
-
-# Install the files
-[[ $VERBOSITY > 0 ]] && echo -n "Populating the ${BUILDDIR}${BLFS_ROOT} directory "
-[[ ! -d ${BUILDDIR}${BLFS_ROOT} ]] && mkdir -pv ${BUILDDIR}${BLFS_ROOT}
-rm -rf ${BUILDDIR}${BLFS_ROOT}/*
-cp -r BLFS/* ${BUILDDIR}${BLFS_ROOT}
-cp -r menu ${BUILDDIR}${BLFS_ROOT}
-cp $COMMON_DIR/progress_bar.sh ${BUILDDIR}${BLFS_ROOT}
-cp README.BLFS ${BUILDDIR}${BLFS_ROOT}
-[[ $VERBOSITY > 0 ]] && echo "... OK"
-
-# Clean-up
-[[ $VERBOSITY > 0 ]] && echo -n "Cleaning the ${BUILDDIR}${BLFS_ROOT} directory "
-# We do not want to keep an old version of the book:
-rm -rf ${BUILDDIR}${BLFS_ROOT}/$BLFS_XML
-rm -rf ${BUILDDIR}${BLFS_ROOT}/$LFS_XML
-
-# Set some harcoded envars to their proper values
-sed -i s@tracking-dir@$TRACKING_DIR@ \
-    ${BUILDDIR}${BLFS_ROOT}/{Makefile,gen-makefile.sh,gen_pkg_book.sh}
-
-# Ensures the tracking directory exists.
-# Throws an error if it does not exist and the user does not
-# have write permission to create it.
-# If it exists, does nothing.
-mkdir -p $TRACKING_DIR
-[[ $VERBOSITY > 0 ]] && echo "... OK"
-
-[[ -z "$BLFS_BOOK" ]] ||
-[[ $BLFS_BOOK = $BUILDDIR$BLFS_ROOT/$BLFS_XML ]] || {
-[[ $VERBOSITY > 0 ]] && echo -n "Retrieving BLFS working copy (may take some time) "
-cp -a $BLFS_BOOK $BUILDDIR$BLFS_ROOT/$BLFS_XML
-[[ $VERBOSITY > 0 ]] && echo "... OK"
-}
-
-[[ -z "$LFS_BOOK" ]] ||
-[[ $LFS_BOOK = $BUILDDIR$BLFS_ROOT/$LFS_XML ]] || {
-[[ $VERBOSITY > 0 ]] && echo -n "Retrieving the LFS working copy (may take some time) "
-cp -a $LFS_BOOK $BUILDDIR$BLFS_ROOT/$LFS_XML
-[[ $VERBOSITY > 0 ]] && echo "... OK"
-}
-
-[[ $VERBOSITY > 0 ]] && echo "Initializing the BLFS tool directory "
-make -j1 -C $BUILDDIR$BLFS_ROOT \
-     TRACKING_DIR=$TRACKING_DIR \
-     REV=$INITSYS            \
-     LFS_XML=$BUILDDIR$BLFS_ROOT/$LFS_XML      \
-     LFS-BRANCH=${LFS_COMMIT}                      \
-     BLFS_XML=$BUILDDIR$BLFS_ROOT/$BLFS_XML      \
-     BLFS-BRANCH=${BLFS_COMMIT}                    \
-     $BUILDDIR$BLFS_ROOT/packages.xml
-[[ $VERBOSITY > 0 ]] && echo "... OK"
-

jhalfs

@@ -1,25 +1,29 @@
 #!/bin/bash
+# $Id$
 set -e
-# Pass trap handlers to functions
-set -E
 
 # VT100 colors
+declare -r  BLACK=$'\e[1;30m'
+declare -r  DK_GRAY=$'\e[0;30m'
+
 declare -r  RED=$'\e[31m'
 declare -r  GREEN=$'\e[32m'
 declare -r  YELLOW=$'\e[33m'
-
-# shellcheck disable=SC2034
 declare -r  BLUE=$'\e[34m'
+declare -r  MAGENTA=$'\e[35m'
+declare -r  CYAN=$'\e[36m'
+declare -r  WHITE=$'\e[37m'
+
 declare -r  OFF=$'\e[0m'
 declare -r  BOLD=$'\e[1m'
+declare -r  REVERSE=$'\e[7m'
+declare -r  HIDDEN=$'\e[8m'
+
 declare -r  tab_=$'\t'
 declare -r  nl_=$'\n'
 
-# shellcheck disable=SC2034
 declare -r   DD_BORDER="${BOLD}==============================================================================${OFF}"
-# shellcheck disable=SC2034
 declare -r   SD_BORDER="${BOLD}------------------------------------------------------------------------------${OFF}"
-# shellcheck disable=SC2034
 declare -r STAR_BORDER="${BOLD}******************************************************************************${OFF}"
 
 # bold yellow > <  pair
@@ -31,14 +35,14 @@ declare -r L_arrow=$'\e[1;33m<\e[0m'
 #-----------------------#
 simple_error() {        # Basic error trap.... JUST DIE
 #-----------------------#
-  LASTLINE="$1"
+  # If +e then disable text output
-  LASTERR="$2"
+  if [[ "$-" =~ e ]]; then
-  LASTSOURCE="$4"
+    echo -e "\n${RED}ERROR:${GREEN} basic error trapped!${OFF}\n" >&2
-  error_message "${GREEN} Error $LASTERR at $LASTSOURCE line ${LASTLINE}!"
+  fi
 }
 
 see_ya() {
-  printf '\n%b%bjhalfs%b exit%b\n' "$L_arrow" "$BOLD" "$R_arrow" "$OFF"
+    echo -e "\n${L_arrow}${BOLD}jhalfs-X${R_arrow} exit${OFF}\n"
 }
 ##### Simple error TRAPS
 # ctrl-c   SIGINT
@@ -53,114 +57,55 @@ see_ya() {
 #####
 set -e
 trap see_ya 0
-trap 'simple_error "${LINENO}" "$?" "${FUNCNAME}" "${BASH_SOURCE}"' ERR
+trap simple_error ERR
-trap 'echo -e "\n\n${RED}INTERRUPT${OFF} trapped\n" &&  exit 2' \
+trap 'echo -e "\n\n${RED}INTERRUPT${OFF} trapped\n" &&  exit 2'  1 2 3 15 17 18 23
-      HUP INT QUIT TERM # STOP stops tterminal output and does not seem to
-                        # execute the handler
 #>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
 
-simple_message() {
-  # Prevents having to check $VERBOSITY everywhere
-  if [ "$VERBOSITY" -ne 0 ] ; then
-    # shellcheck disable=SC2059
-    printf "$*"
-  fi
-}
-
-warning_message() {
-  simple_message "${YELLOW}\\nWARNING:${OFF} $*\\n\\n"
-}
-
-error_message() {
-  # Prints an error message and exits with LASTERR or 1
-  if [ -n "$LASTERR" ] ; then
-    LASTERR=$(printf '%d' "$LASTERR")
-  else
-    LASTERR=1
-  fi
-  # If +e then disable text output
-  if [[ "$-" =~ e ]]; then
-    printf '\n\n%bERROR:%b %s\n' "$RED" "$OFF" "$*" >&2
-  fi
-  exit "$LASTERR"
-}
-
-load_file() {
-  # source files in a consistent way with an optional message
-  file="$1"
-  shift
-  msg="Loading file ${file}..."
-  [ -z "$*" ] || msg="$*..."
-  simple_message "$msg"
-
-  # shellcheck disable=SC1090
-  source "$file" 2>/dev/null || error_message "$file did not load"
-  simple_message "OK\\n"
-}
-
-git_commit=$(git log -1 --format=format:"%h %ad")
 version="
-${BOLD}  \"jhalfs\"${OFF} builder tool (development) $git_commit
+${BOLD}  \"jhalfs-X\"${OFF} builder tool (experimental) \$Rev$
+  \$Date$
 
-  Copyright (C) 2005-2023, the jhalfs team:
+  Written by George Boudreau and Manuel Canales Esparcia,
-    Jeremy Huntwork
+  plus several contributions.
-    George Boudreau
-    Manuel Canales Esparcia
-    Thomas Pegg
-    Matthew Burgess
-    Pierre Labastie
 
-  Unless specified, all the files in this directory and its sub-directories
+  Based on an idea from Jeremy Huntwork
-  are subjected to the ${BOLD}MIT license${OFF}. See the ${BOLD}LICENSE${OFF} file.
 
-  The files in the ${BOLD}menu${OFF} directory are subjected to the ${BOLD}ISC License${OFF}.
+  This set of files are published under the
-  See ${BOLD}LICENSE.txt${OFF} and ${BOLD}README${OFF} in that directory.
+  ${BOLD}Gnu General Public License, Version 2.${OFF}
 "
 
-usage="${nl_}${tab_}${BOLD}${RED}This script cannot be called directly${OFF}
-${tab_}Type ${BOLD}make${OFF} to run the tool, or
-${tab_}Type ${BOLD}./jhalfs -v${OFF} to display version information."
-
 case $1 in
-  -v ) echo "$version" && exit ;;
+  -v ) echo "$version" && exit 1 ;;
   run ) : ;;
-  * ) echo "$usage" && exit 1 ;;
+  * )
+    echo "${nl_}${tab_}${BOLD}${RED}This script cannot be called directly: EXITING ${OFF}${nl_}"
+    exit 1
+    ;;
 esac
 
-# If the user has not saved his configuration file, let's ask
-# if he or she really wants to run this stuff
-time_current=$(stat -c '%Y' configuration 2>/dev/null || date +%s)
-time_old=$(stat -c '%Y' configuration.old 2>/dev/null || printf '%s' "$time_current")
-if [ "$(printf '%d' "$time_old")" -ge "$(printf '%d' "$time_current")" ] ; then
-  printf 'Do you want to run jhalfs? yes/no (yes): '
-  read -r ANSWER
-  case ${ANSWER:0:1} in
-    n|N) printf "\nExiting gracefully.\n"; exit ;;
-  esac
-fi
-
-# Change this to 0 to suppress almost all messages
 VERBOSITY=1
 
-load_file configuration "Loading config params from <configuration>"
+[[ $VERBOSITY > 0 ]] && echo -n "Loading config params from <configuration>..."
+source configuration
+[[ $? > 0 ]] && echo "file:configuration did not load.." && exit 1
+[[ $VERBOSITY > 0 ]] && echo "OK"
 
 # These are boolean vars generated from Config.in.
-# ISSUE: If a boolean parameter is not set to y(es) there
+# ISSUE: If a boolean parameter is not set <true> that
-# is no variable defined by the menu app. This can
+# variable is not defined by the menu app. This can
-# cause a headache if you are not aware.
+# cause a headache if you are not careful.
-#  The following variables MUST exist. If they don't, the
+#  The following parameters MUST be created and have a
-#  default value is n(o).
+#  default value.
 RUNMAKE=${RUNMAKE:-n}
 GETPKG=${GETPKG:-n}
+GETKERNEL=${GETKERNEL:-n}
 COMPARE=${COMPARE:-n}
+RUN_FARCE=${RUN_FARCE:-n}
 RUN_ICA=${RUN_ICA:-n}
-PKGMNGT=${PKGMNGT:-n}
+BOMB_TEST=${BOMB_TEST:-n}
-WRAP_INSTALL=${WRAP_INSTALL:-n}
 STRIP=${STRIP:=n}
 REPORT=${REPORT:=n}
-NCURSES5=${NCURSES5:-n}
+VIMLANG=${VIMLANG:-n}
-DEL_LA_FILES=${DEL_LA_FILES:-n}
-FULL_LOCALE=${FULL_LOCALE:-n}
 GRSECURITY_HOST=${GRSECURITY_HOST:-n}
 CUSTOM_TOOLS=${CUSTOM_TOOLS:-n}
 REBUILD_MAKEFILE=${REBUILD_MAKEFILE:-n}
@@ -173,243 +118,256 @@ SET_HARDENED_TMP=${SET_HARDENED_TMP:=n}
 SET_WARNINGS=${SET_WARNINGS:=n}
 SET_MISC=${SET_MISC:=n}
 SET_BLOWFISH=${SET_BLOWFISH:=n}
-UNICODE=${UNICODE:=n}
-LOCAL=${LOCAL:=n}
-ALL_CORES=${ALL_CORES:=n}
-REALSBU=${REALSBU:=n}
-SAVE_CH5=${SAVE_CH5:=n}
-
-if [[ "${NO_PROGRESS_BAR}" = "y" ]] ; then
-# shellcheck disable=SC2034
-  NO_PROGRESS="#"
-fi
 
 # Sanity check on the location of $BUILDDIR / $JHALFSDIR
-CWD="$(cd "$(dirname "$0")" && pwd)"
+CWD=$(cd `dirname $0` && pwd)
-if [[ $JHALFSDIR == "$CWD" ]]; then
+if [[ $JHALFSDIR == $CWD ]]; then
     echo " The jhalfs source directory conflicts with the jhalfs build directory."
     echo " Please move the source directory or change the build directory."
     exit 2
 fi
 
+# Book surces envars
+BRANCH_ID=${BRANCH_ID:=development}
+
+case $BRANCH_ID in
+  development )
+    case $PROGNAME in
+      clfs2 ) TREE=branches/clfs-sysroot/BOOK ;;
+      clfs3 ) TREE=branches/clfs-embedded/BOOK ;;
+           *) TREE=trunk/BOOK ;;
+    esac
+    LFSVRS=development
+    ;;
+  *EDIT* )  echo " You forgot to set the branch or stable book version."
+            echo " Please rerun make and fix the configuration."
+            exit 2 ;;
+  branch-* )
+    LFSVRS=${BRANCH_ID}
+    TREE=branches/${BRANCH_ID#branch-}/BOOK
+    ;;
+  * )
+    case $PROGNAME in
+      lfs | hlfs )
+        LFSVRS=${BRANCH_ID}
+        TREE=tags/${BRANCH_ID}/BOOK
+        ;;
+      clfs | clfs2 | clfs3)
+        LFSVRS=${BRANCH_ID}
+        TREE=tags/${BRANCH_ID}
+        ;;
+    esac
+    ;;
+esac
+
 # Set the document location...
-BOOK=${BOOK:=$JHALFSDIR/book-source}
+BOOK=${BOOK:=$PROGNAME-$LFSVRS}
-
-
-#--- Envars not sourced from configuration
-# shellcheck disable=SC2034
-declare -r REPO=https://git.linuxfromscratch.org/lfs.git
-declare -r LOG=000-masterscript.log
-declare -r COMMANDS=lfs-commands
-
-# Set true internal variables
-COMMON_DIR="common"
-PACKAGE_DIR=LFS
-MODULE=$PACKAGE_DIR/master.sh
-PKGMNGTDIR="pkgmngt"
-# The name packageManager.xml is hardcoded in *.xsl, so no variable.
-
-for file in \
-    "$COMMON_DIR/common-functions" \
-    "$COMMON_DIR/libs/func_book_parser" \
-    "$COMMON_DIR/libs/func_download_pkgs" \
-    "$COMMON_DIR/libs/func_wrt_Makefile" \
-    "$MODULE" ; do
-  load_file "$file"
-done
-
-simple_message "${SD_BORDER}${nl_}"
-
-
-#*******************************************************************#
-LASTERR=2
-for file in \
-    "$COMMON_DIR/libs/func_check_version.sh" \
-    "$COMMON_DIR/libs/func_validate_configs.sh" \
-    "$COMMON_DIR/libs/func_custom_pkgs" ; do
-  load_file "$file"
-done
-unset LASTERR
-
-simple_message "${SD_BORDER}${nl_}"
-simple_message "Checking tools required for jhalfs${nl_}"
-check_alfs_tools
-simple_message "${SD_BORDER}${nl_}"
 
 # blfs-tool envars
 BLFS_TOOL=${BLFS_TOOL:-n}
+DEP_LIBXML=${DEP_LIBXML:-n}
+DEP_LIBXSLT=${DEP_LIBXSLT:-n}
+DEP_TIDY=${DEP_TIDY:-n}
+DEP_UNZIP=${DEP_UNZIP:-n}
+DEP_DBXML=${DEP_DBXML:-n}
+DEP_DBXSL=${DEP_DBXSL:-n}
+DEP_GPM=${DEP_GPM:-n}
+DEP_LYNX=${DEP_LYNX:-n}
+DEP_SUDO=${DEP_SUDO:-n}
+DEP_WGET=${DEP_WGET:-n}
+DEP_SVN=${DEP_SVN:-n}
 if [[ "${BLFS_TOOL}" = "y" ]] ; then
-#not needed now that the check is in alfs_tools
+  BLFS_BRANCH_ID=${BLFS_BRANCH_ID:=development}
-#  simple_message 'Checking supplementary tools for installing BLFS'
+  case $BLFS_BRANCH_ID in
-#  check_blfs_tools
+    development )  BLFS_TREE=trunk/BOOK ;;
-  simple_message "${SD_BORDER}${nl_}"
+         *EDIT* )  echo " You forgot to set the BLFS branch or stable book version."
-  BLFS_BRANCH=${BLFS_BRANCH:-n}
-  BLFS_WORKING_COPY=${BLFS_WORKING_COPY:-n}
-  if [[ "${BLFS_WORKING_COPY}" = "y" ]] &&
-     [[ ! -d "$BLFS_WC_LOCATION/postlfs" ]] ; then
-      echo " BLFS tools: This is not a working copy: $BLFS_WC_LOCATION."
                    echo " Please rerun make and fix the configuration."
-      exit 2
+                   exit 2 ;;
-  fi
+       branch-* )  BLFS_TREE=branches/${BLFS_BRANCH_ID#branch-} ;;
-  load_file "${COMMON_DIR}/libs/func_install_blfs"
+              * )  BLFS_TREE=tags/${BLFS_BRANCH_ID} ;;
+  esac
 fi
 
+#--- Envars not sourced from configuration
+case $PROGNAME in
+  clfs* ) declare -r SVN="http://svn.cross-lfs.org/svn/repos" ;;
+      * ) declare -r SVN="svn://svn.linuxfromscratch.org" ;;
+esac
+declare -r LOG=000-masterscript.log
+  # Needed to can fetch BLFS book sources when building CLFS
+declare -r SVN_2="svn://svn.linuxfromscratch.org"
+
+# Set true internal variables
+CODE_DIR=`pwd`
+COMMON_DIR="common"
+PACKAGE_DIR=$(echo $PROGNAME | tr '[a-z]' '[A-Z]')
+MODULE=$PACKAGE_DIR/master.sh
+
+# Qick fix until have the new code ready
+XSL=$CODE_DIR/$PACKAGE_DIR/$XSL
+
+[[ $VERBOSITY > 0 ]] && echo -n "Loading common-functions module..."
+source $COMMON_DIR/common-functions
+[[ $? > 0 ]] && echo " $COMMON_DIR/common-functions did not load.." && exit
+[[ $VERBOSITY > 0 ]] && echo "OK"
+[[ $VERBOSITY > 0 ]] && echo -n "Loading code module <$MODULE>..."
+source $MODULE
+[[ $? > 0 ]] && echo "$MODULE did not load.." && exit 2
+[[ $VERBOSITY > 0 ]] && echo "OK"
+#
+[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
+
+
+#*******************************************************************#
+[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_check_version.sh>..."
+source $COMMON_DIR/libs/func_check_version.sh
+[[ $? > 0 ]] && echo " function module did not load.." && exit 2
+[[ $VERBOSITY > 0 ]] && echo "OK"
+
+[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_validate_configs.sh>..."
+source $COMMON_DIR/libs/func_validate_configs.sh
+[[ $? > 0 ]] && echo " function module did not load.." && exit 2
+[[ $VERBOSITY > 0 ]] && echo "OK"
+
+[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_custom_pkgs>..."
+source $COMMON_DIR/libs/func_custom_pkgs
+[[ $? > 0 ]] && echo " function module did not load.." && exit 2
+[[ $VERBOSITY > 0 ]] && echo "OK"
+
+
+[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
+
+
 ###################################
 ###          MAIN               ###
 ###################################
 
+# Check for build prereequisites.
+echo
+  check_prerequisites
+echo "${SD_BORDER}${nl_}"
 
 validate_config
 echo "${SD_BORDER}${nl_}"
 echo -n "Are you happy with these settings? yes/no (no): "
-read -r ANSWER
+read ANSWER
-if [ "x$ANSWER" != "xyes" ] ; then
+if [ x$ANSWER != "xyes" ] ; then
   echo "${nl_}Rerun make to fix the configuration options.${nl_}"
-  exit
+  exit 1
 fi
 echo "${nl_}${SD_BORDER}${nl_}"
 
 # Load additional modules or configuration files based on global settings
 # compare module
 if [[ "$COMPARE" = "y" ]]; then
-  load_file "${COMMON_DIR}/libs/func_compare.sh" 'Loading compare module'
+  [[ $VERBOSITY > 0 ]] && echo -n "Loading compare module..."
-fi
+  source $COMMON_DIR/libs/func_compare.sh
-#
+  [[ $? > 0 ]] && echo "$COMMON_DIR/libs/func_compare.sh did not load.." && exit
-# save module
+  [[ $VERBOSITY > 0 ]] && echo "OK"
-if [[ "$SAVE_CH5" = "y" ]]; then
-  load_file "${COMMON_DIR}/libs/func_save.sh" 'Loading save module'
-fi
-#
-# optimize module
-# the optimize_functions file is needed for wrt_makeflags even
-# if optimize=0, because we need to pass NINJAJOBS=1
-load_file optimize/optimize_functions 'Loading optimization module'
-if [[ "$OPTIMIZE" != "0" ]]; then
-  #
-  # optimize configurations
-  load_file optimize/opt_config 'Loading optimization config'
-  # Validate optimize settings, if required
-  validate_opt_settings
-fi
-# Parallelization is outside optimization, because it is now in the book
-if [[ "$ALL_CORES" = "n" ]]; then
-  # shellcheck disable=SC2034
-  JH_MAKEFLAGS="-j${N_PARALLEL}"
 fi
 #
 
 if [[ "$REBUILD_MAKEFILE" = "n" ]] ; then
 
-# If requested, clean the build directory
+  # If $BUILDDIR has subdirectories like tools/ or bin/, stop the run
+  # and notify the user about that.
+  if [ -d $BUILDDIR/tools -o -d $BUILDDIR/bin ] && [ -z $CLEAN ] ; then
+    eval "$no_empty_builddir"
+  fi
+
+  # If requested, clean the build directory
   clean_builddir
 
   if [[ ! -d $JHALFSDIR ]]; then
-    sudo mkdir -p "$JHALFSDIR"
+    mkdir -p $JHALFSDIR
-# Do not assume there is a group named as $USER, do not use
-# $USER:$USER...
-    sudo chown "$USER" "$JHALFSDIR"
   fi
 
-# Create $BUILDDIR/sources even though it could be created by get_sources()
+  # Create $BUILDDIR/sources even though it could be created by get_sources()
   if [[ ! -d $BUILDDIR/sources ]]; then
-    sudo mkdir -p "$BUILDDIR/sources"
+    mkdir -p $BUILDDIR/sources
-    sudo chmod a+wt "$BUILDDIR/sources"
   fi
-
+  #
-# Create the log directory
+  # Create the log directory
   if [[ ! -d $LOGDIR ]]; then
-    mkdir "$LOGDIR"
+    mkdir $LOGDIR
   fi
-  true >"$LOGDIR/$LOG"
+  >$LOGDIR/$LOG
+  #
+  # Copy common helper files
+  cp $COMMON_DIR/{makefile-functions,progress_bar.sh} $JHALFSDIR/
+  #
 
-# Copy common helper files
+  # Create the test-log directory, if needed
-  cp "$COMMON_DIR"/{makefile-functions,progress_bar.sh,run-in-cgroup.sh} "$JHALFSDIR/"
+  [[ "$TEST" != "0" ]] && [[ ! -d $TESTLOGDIR ]] && install -d -m 1777 $TESTLOGDIR
-
+  #
-# Copy needed stylesheets
+  # Create the installed-files directory, if needed
-  cp "$COMMON_DIR"/{packages.xsl,chroot.xsl,kernfs.xsl} "$JHALFSDIR/"
+  [[ "$INSTALL_LOG" = "y" ]] && [[ ! -d $FILELOGDIR ]] && install -d -m 1777 $FILELOGDIR
-  cp "$PACKAGE_DIR/$XSL" "$JHALFSDIR/"
+  #
-
+  # Prepare report creation, if needed
-  export XSL=$JHALFSDIR/${XSL}
-
-# Copy packageManager.xml, if needed
-  [[ "$PKGMNGT" = "y" ]] && {
-    sed s@BOOK@"$BOOK"@ "$PKGMNGTDIR/packageManager.xml" > \
-                        "$JHALFSDIR/"packageManager.xml
-    cp "$PKGMNGTDIR/packInstall.sh" "$JHALFSDIR/"
-    }
-
-# Copy urls.xsl, if needed
-  [[ "$GETPKG" = "y" ]] && cp "$COMMON_DIR/urls.xsl" "$JHALFSDIR/"
-
-# Always create the test-log directory to allow user to "uncomment" test
-# instructions
-  install -d -m 1777 "$TESTLOGDIR"
-
-# Create the installed-files directory, if needed
-  [[ "$INSTALL_LOG" = "y" ]] && [[ ! -d $FILELOGDIR ]] && install -d -m 1777 "$FILELOGDIR"
-
-# Prepare report creation, if needed
   if [[ "$REPORT" = "y" ]]; then
-    cp $COMMON_DIR/create-sbu_du-report.sh  "$JHALFSDIR/"
+    cp $COMMON_DIR/create-sbu_du-report.sh  $JHALFSDIR/
-    # After making sure that all looks sane, dump the settings to a file
+    # After being sure that all looks sane, dump the settings to a file
     # This file will be used to create the REPORT header
-    validate_config >"$JHALFSDIR/jhalfs.config"
+    validate_config > $JHALFSDIR/jhalfs.config
   fi
-
+  #
-# Copy optimize files, if needed
+  # Copy compare files, if needed
-  [[ "$OPTIMIZE" != "0" ]] && cp optimize/opt_override "$JHALFSDIR/"
-
-# Copy compare files, if needed
   if [[ "$COMPARE" = "y" ]]; then
-    mkdir -p "$JHALFSDIR/extras"
+    mkdir -p $JHALFSDIR/extras
-    cp extras/* "$JHALFSDIR/extras"
+    cp extras/* $JHALFSDIR/extras
   fi
+  #
 
-# Copy custom tools config files, if requested
+  # Install blfs-tool, if requested.
-  if [[ "${CUSTOM_TOOLS}" = "y" ]]; then
-    echo "Copying custom tool scripts to $JHALFSDIR"
-    mkdir -p "$JHALFSDIR/custom-commands"
-    cp -f custom/config/* "$JHALFSDIR/custom-commands"
-  fi
-
-# Download or updates the book source
-# Note that all customization to $JHALFSDIR have to be done before this.
-# But the LFS book is needed for BLFS tools.
-  get_book
-  extract_commands
-  echo "${SD_BORDER}${nl_}"
-  cd "$CWD" # the functions above change directory
-
-# Install blfs-tool, if requested.
   if [[ "${BLFS_TOOL}" = "y" ]] ; then
-    echo Installing BLFS book and tools
+    # Install the files
-    install_blfs_tools 2>&1 | tee -a "$LOGDIR/$LOG"
+    [[ ! -d ${BUILDDIR}${BLFS_ROOT} ]] && mkdir -p ${BUILDDIR}${BLFS_ROOT}
-    [[ ${PIPESTATUS[0]} != 0 ]] && exit 1
+    cp -r BLFS/* ${BUILDDIR}${BLFS_ROOT}
+    cp -r menu ${BUILDDIR}${BLFS_ROOT}
+    cp $COMMON_DIR/progress_bar.sh ${BUILDDIR}${BLFS_ROOT}
+    cp README.BLFS ${BUILDDIR}${BLFS_ROOT}
+    # Clean-up
+    rm -rf ${BUILDDIR}${BLFS_ROOT}/libs/.svn
+    rm -rf ${BUILDDIR}${BLFS_ROOT}/menu/.svn
+    rm -rf ${BUILDDIR}${BLFS_ROOT}/menu/lxdialog/.svn
+    # Set some harcoded envars to their proper values
+    sed -i 's,blfs-xml,'$BLFS_XML',' ${BUILDDIR}${BLFS_ROOT}/{update_book.sh,libs/book.xsl}
+    sed -i 's,tracking-dir,'$TRACKING_DIR',' ${BUILDDIR}${BLFS_ROOT}/{update_book.sh,gen-makefile.sh}
+  fi
+  #
+
+  get_book
+  echo "${SD_BORDER}${nl_}"
+
+  # Get the BLFS book, if requested.
+  if [[ "${BLFS_TOOL}" = "y" ]] ; then
+    echo -n "Downloading the BLFS document, $BLFS_BRANCH_ID version... "
+    if [[ ! -d ${BUILDDIR}${BLFS_ROOT}/${BLFS_XML} ]] ; then
+      mkdir -p ${BUILDDIR}${BLFS_ROOT}/${BLFS_XML}
+      svn co $SVN_2/BLFS/$BLFS_TREE ${BUILDDIR}${BLFS_ROOT}/${BLFS_XML} >>$LOGDIR/$LOG 2>&1
+    else
+      pushd ${BUILDDIR}${BLFS_ROOT}/${BLFS_XML} 1> /dev/null
+        svn up >>$LOGDIR/$LOG 2>&1
+      popd 1> /dev/null
+    fi
+    echo -ne "done\n"
+    echo "${SD_BORDER}${nl_}"
   fi
 
 fi
 
-# shellcheck disable=SC2034
+# When regenerating the Makefile we need to know also the canonical book version
 if [[ "$REBUILD_MAKEFILE" = "y" ]] ; then
-# Sanity check: users tend to tick "rebuild Makefile"
+  case $PROGNAME in
-# without generating one first. Check we have one:
+    clfs | clfs2 | clfs3 )
-  if [ ! -f $MKFILE ]; then
+      VERSION=$(xmllint --noent $JHALFSDIR/$BOOK/prologue/$ARCH/bookinfo.xml 2>/dev/null | grep subtitle | sed -e 's/^.*ion //'  -e 's/<\/.*//') ;;
-    set -e
+    *)
-    error_message "You cannot \"rebuild Makefile\" without first building one"
+      VERSION=$(xmllint --noent $JHALFSDIR/$BOOK/prologue/bookinfo.xml 2>/dev/null | grep subtitle | sed -e 's/^.*ion //'  -e 's/<\/.*//')  ;;
-  fi
+  esac
-# When regenerating the Makefile, we need to know also the
-# canonical book version
-VERSION=$(grep 'echo.*lfs-release' "$JHALFSDIR/prbook.xml" | sed 's/.*echo[ ]*\([^ ]*\).*/\1/')
 fi
 
 build_Makefile
 
 echo "${SD_BORDER}${nl_}"
 
-# Check for build prerequisites.
-  echo
-  cd "$CWD"
-  check_prerequisites
-  echo "${SD_BORDER}${nl_}"
-# All is well, run the build (if requested)
 run_make