This repository has been archived on 2024-10-17. You can view files and clone it, but cannot push or open issues or pull requests.
MahiroOS-jhalfs/BLFS/gen-special.sh
Pierre Labastie 9eb3dbe1c4 Don't build Xorg components that are commented out
gen-special.sh uses the list of files and md5 from the
cat instructions to generate an xml page for each of
the individual components. Until now, there were no commented
out component, so gen-special.sh was not prepared to handle
comments. Now, it removes lines containing comments.
2023-08-30 20:04:38 +02:00

280 lines
11 KiB
Bash
Executable file

#!/bin/bash
#-------------------------------------------------------------------------
# generates an xsl stylesheet containing a template for special
# cases in the book:
# - If the version does not begin with a number, it is impossible to know
# where the package name ends and where the version begins. We therefore
# use the ENTITY at the beginning of the validated full-xml.
# - If a package is part of a group of xorg packages (proto, fonts, etc)
# there is no easy way to extract it from the xml. We use the ENTITY at
# the top of each file x7*.xml
# - Some non-versioned packages are needed as dependencies of others: we
# attribute version 1.0.0 to them. It is just used to know if the package
# is installed, by checking inst-version.
# - If a package is versioned but the version is not mentioned in the book
# (currently only udev), we retrieve the version by other means
#-------------------------------------------------------------------------
# Arguments:
# $1 contains the name of the validated xml book
# $2 contains the name of the ouput xsl file
# $3 contains the name of the book sources directory
#-------------------------------------------------------------------------
BLFS_XML=$1
if ! test -f ${BLFS_XML}; then
echo File \`${BLFS_XML}\' does not exist
exit 1
fi
SPECIAL_FILE=$2
if test -z "${SPECIAL_FILE}"; then SPECIAL_FILE=specialCases.xsl;fi
BLFS_DIR=$3
if test -z "${BLFS_DIR}"; then BLFS_DIR=$(cd $(dirname ${BLFS_XML})/.. ; pwd);fi
# Packages whose version does not begin with a number
EXCEPTIONS=$(grep 'ENTITY.*version[ ]*"[^0-9"&.].*[0-9]' ${BLFS_DIR}/packages.ent |
sed 's@^[^"]*"\([^"]*\)".*@\1@')
# Non-versioned packages:
NV_LIST="postlfs-config-profile postlfs-config-random postlfs-config-vimrc \
initramfs xorg-env kde-pre-install-config kf5-intro \
lxqt-pre-install lxqt-post-install ojdk-conf tex-path"
cat >$SPECIAL_FILE << EOF
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
version="1.0">
<xsl:template match='*' mode="special">
<xsl:choose>
<!-- Although versioned, this page is not a package. But
the sect2 with id "xorg-env" is referred to at several
places in the book. We have added it to the list of non
versioned packages. -->
<xsl:when test="@id='xorg7'">
<xsl:apply-templates select="child::sect2" mode="special"/>
</xsl:when>
EOF
# Non-versionned packages. Add to NV_LIST if you need more.
for nv_id in $NV_LIST; do
cat >>$SPECIAL_FILE << EOF
<xsl:when test="@id='$nv_id'">
<xsl:text> </xsl:text>
<package><xsl:text>&#xA; </xsl:text>
<xsl:element name="name">$nv_id</xsl:element>
<xsl:text>&#xA; </xsl:text>
<xsl:element name="version">1.0.0</xsl:element>
<xsl:if
test="document(\$installed-packages)//package[name=current()/@id]">
<xsl:text>&#xA; </xsl:text>
<xsl:element name="inst-version">
<xsl:value-of
select="document(\$installed-packages
)//package[name=current()/@id]/version"/>
</xsl:element>
</xsl:if>
<!-- Dependencies -->
<xsl:apply-templates select=".//para[@role='required' or
@role='recommended' or
@role='optional']"
mode="dependency"/>
<!-- End dependencies -->
<xsl:text>&#xA; </xsl:text>
</package><xsl:text>&#xA;</xsl:text>
</xsl:when>
EOF
done
# Taking packages inside x7proto etc, as versionned modules.
# We also write a dependency expansion when a dep is of the form
# xorg7-something. Since that is another template, we need
# a temporary file, which we shall concatenate at the end
cat >tmpfile << EOF
<xsl:template name="expand-deps">
<xsl:param name="section"/>
<xsl:param name="status"/>
<xsl:param name="build"/>
<xsl:choose>
EOF
for file in $(ls ${BLFS_DIR}/x/installing/x7* | grep -v x7driver); do
id=$(grep xreflabel $file | sed 's@.*id="\([^"]*\).*@\1@')
cat >>$SPECIAL_FILE << EOF
<xsl:when test="@id='$id'">
<xsl:text> </xsl:text>
<package><xsl:text>&#xA; </xsl:text>
<xsl:element name="name">$id</xsl:element>
<xsl:text>&#xA; </xsl:text>
EOF
cat >> tmpfile << EOF
<xsl:when test="\$section='$id'">
EOF
# We extract the list of packages for an xorg page from
# the version part of the .xml file. Seems that
# the order is not always the same as in the "cat" command.
# So we have to read that command too, since it may be assumed
# that the preceding package is a dependency of the following,
# except the first.
list_cat="$(sed -n '/>cat/,/EOF</p' $file | grep -v 'cat\|EOF\|#' |
awk '{ print $NF }' | sed 's/-&.*//')"
# Rationale for the sed below: the following for breaks words at spaces (unless
# we tweak IFS). So replace spaces with commas in lines so that only newlines
# are separators.
for pack in \
$(grep 'ENTITY.*version' $file | sed 's/[ ]\+/,/g'); do
packname=$(echo $pack | sed s'@.*ENTITY,\(.*\)-version.*@\1@')
packversion=$(echo $pack | sed 's@[^"]*"\([^"]*\).*@\1@')
precpack=NONE
for i in $list_cat; do
if [ "$i" = "$packname" ]; then break; fi
precpack=$i
done
# It may happen that packname is not in list_cat, because its entity
# is commented out in the xml, but we do not check that (too complicated).
# In that case, the whole list is scanned, and $precpack=$i at the end.
# when packname is found in the list $precpack!=$i.
if [ "$precpack" = "$i" ]; then continue; fi
cat >>$SPECIAL_FILE << EOF
<module><xsl:text>&#xA; </xsl:text>
<xsl:element name="name">$packname</xsl:element>
<xsl:element name="version">$packversion</xsl:element>
<xsl:if test="document(\$installed-packages)//package[name='$packname']">
<xsl:element name="inst-version">
<xsl:value-of
select="document(\$installed-packages
)//package[name='$packname']/version"/>
</xsl:element>
</xsl:if>
<!-- Dependencies -->
EOF
if test $precpack != NONE; then
cat >>$SPECIAL_FILE << EOF
<xsl:element name="dependency">
<xsl:attribute name="status">required</xsl:attribute>
<xsl:attribute name="build">before</xsl:attribute>
<xsl:attribute name="name">$precpack</xsl:attribute>
<xsl:attribute name="type">ref</xsl:attribute>
</xsl:element>
EOF
else
cat >>$SPECIAL_FILE << EOF
<xsl:apply-templates select=".//para[@role='required' or
@role='recommended' or
@role='optional']"
mode="dependency"/>
EOF
fi
cat >>$SPECIAL_FILE << EOF
<!-- End dependencies -->
</module>
EOF
cat >> tmpfile << EOF
<xsl:element name="dependency">
<xsl:attribute name="status">
<xsl:value-of select="\$status"/>
</xsl:attribute>
<xsl:attribute name="build">
<xsl:value-of select="\$build"/>
</xsl:attribute>
<xsl:attribute name="name">$packname</xsl:attribute>
<xsl:attribute name="type">ref</xsl:attribute>
</xsl:element>
EOF
done
cat >>$SPECIAL_FILE << EOF
</package>
</xsl:when>
EOF
cat >> tmpfile << EOF
</xsl:when>
EOF
done
for ver_ent in $EXCEPTIONS; do
id=$(grep 'xreflabel=".*'$ver_ent $BLFS_XML | sed 's@.*id="\([^"]*\)".*@\1@')
[[ -z $id ]] && continue
cat >>$SPECIAL_FILE << EOF
<xsl:when test="@id='$id'">
<!-- if there is a sect1 ancestor, we have a module -->
<xsl:choose>
<xsl:when test="ancestor::sect1">
<xsl:text> </xsl:text>
<module><xsl:text>&#xA; </xsl:text>
<xsl:element name="name">$id</xsl:element>
<xsl:text>&#xA; </xsl:text>
<xsl:element name="version">$ver_ent</xsl:element>
<xsl:if
test="document(\$installed-packages)//package[name=current()/@id]">
<xsl:text>&#xA; </xsl:text>
<xsl:element name="inst-version">
<xsl:value-of
select="document(\$installed-packages
)//package[name=current()/@id]/version"/>
</xsl:element>
</xsl:if>
<!-- Dependencies -->
<xsl:apply-templates select=".//para[@role='required' or
@role='recommended' or
@role='optional']"
mode="dependency"/>
<!-- End dependencies -->
<xsl:text>&#xA; </xsl:text>
</module><xsl:text>&#xA;</xsl:text>
</xsl:when>
<xsl:otherwise>
<xsl:text> </xsl:text>
<package><xsl:text>&#xA; </xsl:text>
<xsl:element name="name">$id</xsl:element>
<xsl:text>&#xA; </xsl:text>
<xsl:element name="version">$ver_ent</xsl:element>
<xsl:if
test="document(\$installed-packages)//package[name=current()/@id]">
<xsl:text>&#xA; </xsl:text>
<xsl:element name="inst-version">
<xsl:value-of
select="document(\$installed-packages
)//package[name=current()/@id]/version"/>
</xsl:element>
</xsl:if>
<!-- Dependencies -->
<xsl:apply-templates select=".//para[@role='required' or
@role='recommended' or
@role='optional']"
mode="dependency"/>
<!-- End dependencies -->
<xsl:text>&#xA; </xsl:text>
</package><xsl:text>&#xA;</xsl:text>
</xsl:otherwise>
</xsl:choose>
</xsl:when>
EOF
done
cat >>$SPECIAL_FILE << EOF
<xsl:otherwise>
<xsl:apply-templates
select="self::node()[contains(translate(@xreflabel,
'123456789',
'000000000'),
'-0')
]"
mode="normal"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
EOF
cat $SPECIAL_FILE tmpfile > tmpfile1
mv tmpfile1 $SPECIAL_FILE
rm tmpfile
cat >> $SPECIAL_FILE << EOF
<xsl:otherwise>
<xsl:message>
<xsl:text>You should not be seeing this</xsl:text>
</xsl:message>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
</xsl:stylesheet>
EOF