New Crowdin updates (#2146)

* New translations installing-boot9strap-(ntrboot).txt (Thai)

* New translations installing-boot9strap-(soundhax).txt (Croatian)

* New translations installing-boot9strap-(ntrboot).txt (Croatian)

* New translations installing-boot9strap-(hardmod).txt (Malay)

* New translations updating-b9s.txt (Croatian)

* New translations installing-boot9strap-(soundhax).txt (Thai)

* New translations installing-boot9strap-(hardmod).txt (Croatian)

* New translations a9lh-to-b9s.txt (Croatian)

* New translations installing-boot9strap-(soundhax).txt (Malay)

* New translations a9lh-to-b9s.txt (Malay)

* New translations installing-boot9strap-(ntrboot).txt (Malay)

* New translations updating-b9s.txt (Malay)

* New translations installing-boot9strap-(hardmod).txt (Pirate English)

* New translations a9lh-to-b9s.txt (Pirate English)

* New translations updating-b9s.txt (Pirate English)

* New translations installing-boot9strap-(ntrboot).txt (Pirate English)

* New translations installing-boot9strap-(soundhax).txt (Pirate English)

* New translations installing-boot9strap-(hbl-usm).txt (Romanian)

* New translations installing-boot9strap-(hbl-usm).txt (Bulgarian)

* New translations installing-boot9strap-(hbl-usm).txt (Arabic)

* New translations installing-boot9strap-(hbl-usm).txt (Spanish)

* New translations installing-boot9strap-(hbl-usm).txt (French)

* New translations installing-boot9strap-(hbl-usm).txt (Hungarian)

* New translations installing-boot9strap-(hbl-usm).txt (Hebrew)

* New translations installing-boot9strap-(hbl-usm).txt (Greek)

* New translations installing-boot9strap-(hbl-usm).txt (German)

* New translations installing-boot9strap-(hbl-usm).txt (Czech)

* New translations installing-boot9strap-(hbl-usm).txt (Catalan)

* New translations installing-boot9strap-(hbl-usm).txt (Finnish)

* New translations installing-boot9strap-(hbl-usm).txt (Norwegian)

* New translations installing-boot9strap-(hbl-usm).txt (Russian)

* New translations installing-boot9strap-(hbl-usm).txt (Polish)

* New translations installing-boot9strap-(hbl-usm).txt (Swedish)

* New translations installing-boot9strap-(hbl-usm).txt (Dutch)

* New translations installing-boot9strap-(hbl-usm).txt (Korean)

* New translations installing-boot9strap-(hbl-usm).txt (Japanese)

* New translations installing-boot9strap-(hbl-usm).txt (Italian)

* New translations installing-boot9strap-(hbl-usm).txt (Portuguese)

* New translations installing-boot9strap-(hbl-usm).txt (Vietnamese)

* New translations installing-boot9strap-(hbl-usm).txt (Portuguese, Brazilian)

* New translations installing-boot9strap-(hbl-usm).txt (Chinese Simplified)

* New translations installing-boot9strap-(hbl-usm).txt (Ukrainian)

* New translations installing-boot9strap-(hbl-usm).txt (Turkish)

* New translations installing-boot9strap-(hbl-usm).txt (Indonesian)

* New translations installing-boot9strap-(hbl-usm).txt (Thai)

* New translations installing-boot9strap-(hbl-usm).txt (Croatian)

* New translations installing-boot9strap-(hbl-usm).txt (Chinese Traditional)

* New translations installing-boot9strap-(hbl-usm).txt (Malay)

* New translations installing-boot9strap-(hbl-usm).txt (Pirate English)

* New translations installing-boot9strap-(fredtool).txt (Spanish)

* New translations installing-boot9strap-(fredtool).txt (Romanian)

* New translations bannerbomb3-fredtool-(twn).txt (Romanian)

* New translations installing-boot9strap-(fredtool).txt (French)

* New translations bannerbomb3-fredtool-(twn).txt (French)

* New translations faq.txt (Spanish)

* New translations home.txt (Spanish)

* New translations home.txt (Romanian)

* New translations home.txt (French)

* New translations faq.txt (Korean)

* New translations installing-boot9strap-(ntrboot).txt (Korean)

* New translations bannerbomb3-fredtool-(twn).txt (Korean)

* New translations installing-boot9strap-(usm).txt (Korean)

* New translations updating-b9s.txt (Korean)

* New translations home.txt (Catalan)

* New translations bannerbomb3-fredtool-(twn).txt (Bulgarian)

* New translations installing-boot9strap-(fredtool).txt (Bulgarian)

* New translations home.txt (Bulgarian)

* New translations bannerbomb3-fredtool-(twn).txt (Arabic)

* New translations home.txt (Arabic)

* New translations bannerbomb3-fredtool-(twn).txt (Spanish)

* New translations installing-boot9strap-(fredtool).txt (Arabic)

* New translations installing-boot9strap-(fredtool).txt (Czech)

* New translations home.txt (Czech)

* New translations bannerbomb3-fredtool-(twn).txt (Catalan)

* New translations installing-boot9strap-(fredtool).txt (Catalan)

* New translations bannerbomb3-fredtool-(twn).txt (Czech)

* New translations installing-boot9strap-(fredtool).txt (Hebrew)

* New translations bannerbomb3-fredtool-(twn).txt (Finnish)

* New translations home.txt (Hebrew)

* New translations installing-boot9strap-(fredtool).txt (Finnish)

* New translations bannerbomb3-fredtool-(twn).txt (Hebrew)

* New translations home.txt (Hungarian)

* New translations installing-boot9strap-(fredtool).txt (Hungarian)

* New translations home.txt (German)

* New translations home.txt (Greek)

* New translations installing-boot9strap-(fredtool).txt (German)

* New translations bannerbomb3-fredtool-(twn).txt (German)

* New translations installing-boot9strap-(fredtool).txt (Greek)

* New translations bannerbomb3-fredtool-(twn).txt (Greek)

* New translations home.txt (Finnish)

* New translations installing-boot9strap-(fredtool).txt (Italian)

* New translations bannerbomb3-fredtool-(twn).txt (Italian)

* New translations home.txt (Italian)

* New translations bannerbomb3-fredtool-(twn).txt (Hungarian)

* New translations home.txt (Dutch)

* New translations installing-boot9strap-(fredtool).txt (Dutch)

* New translations bannerbomb3-fredtool-(twn).txt (Dutch)

* New translations home.txt (Norwegian)

* New translations installing-boot9strap-(kartdlphax).txt (Korean)

* New translations home.txt (Japanese)

* New translations installing-boot9strap-(fredtool).txt (Japanese)

* New translations bannerbomb3-fredtool-(twn).txt (Japanese)

* New translations home.txt (Korean)

* New translations installing-boot9strap-(fredtool).txt (Korean)

* New translations installing-boot9strap-(fredtool).txt (Norwegian)

* New translations installing-boot9strap-(fredtool).txt (Russian)

* New translations bannerbomb3-fredtool-(twn).txt (Portuguese)

* New translations home.txt (Russian)

* New translations bannerbomb3-fredtool-(twn).txt (Russian)

* New translations home.txt (Swedish)

* New translations installing-boot9strap-(fredtool).txt (Portuguese)

* New translations bannerbomb3-fredtool-(twn).txt (Norwegian)

* New translations home.txt (Polish)

* New translations installing-boot9strap-(fredtool).txt (Polish)

* New translations bannerbomb3-fredtool-(twn).txt (Polish)

* New translations home.txt (Portuguese)

* New translations installing-boot9strap-(fredtool).txt (Swedish)

* New translations bannerbomb3-fredtool-(twn).txt (Swedish)

* New translations bannerbomb3-fredtool-(twn).txt (Chinese Simplified)

* New translations home.txt (Chinese Traditional)

* New translations installing-boot9strap-(fredtool).txt (Chinese Traditional)

* New translations bannerbomb3-fredtool-(twn).txt (Chinese Traditional)

* New translations home.txt (Vietnamese)

* New translations installing-boot9strap-(fredtool).txt (Chinese Simplified)

* New translations home.txt (Turkish)

* New translations installing-boot9strap-(fredtool).txt (Turkish)

* New translations bannerbomb3-fredtool-(twn).txt (Turkish)

* New translations home.txt (Ukrainian)

* New translations home.txt (Chinese Simplified)

* New translations installing-boot9strap-(fredtool).txt (Ukrainian)

* New translations bannerbomb3-fredtool-(twn).txt (Ukrainian)

* New translations installing-boot9strap-(fredtool).txt (Vietnamese)

* New translations home.txt (Portuguese, Brazilian)

* New translations bannerbomb3-fredtool-(twn).txt (Vietnamese)

* New translations installing-boot9strap-(fredtool).txt (Thai)

* New translations bannerbomb3-fredtool-(twn).txt (Thai)

* New translations home.txt (Croatian)

* New translations installing-boot9strap-(fredtool).txt (Croatian)

* New translations home.txt (Thai)

* New translations installing-boot9strap-(fredtool).txt (Portuguese, Brazilian)

* New translations bannerbomb3-fredtool-(twn).txt (Portuguese, Brazilian)

* New translations home.txt (Indonesian)

* New translations installing-boot9strap-(fredtool).txt (Indonesian)

* New translations bannerbomb3-fredtool-(twn).txt (Indonesian)

* New translations bannerbomb3-fredtool-(twn).txt (Croatian)

* New translations home.txt (Malay)

* New translations bannerbomb3-fredtool-(twn).txt (Malay)

* New translations installing-boot9strap-(fredtool).txt (Malay)

* New translations home.txt (Pirate English)

* New translations installing-boot9strap-(fredtool).txt (Pirate English)

* New translations bannerbomb3-fredtool-(twn).txt (Pirate English)

* New translations a9lh-to-b9s.txt (Korean)

* New translations installing-boot9strap-(soundhax).txt (Korean)

* New translations installing-boot9strap-(hardmod).txt (Korean)

* New translations faq.txt (Romanian)

* New translations installing-boot9strap-(hbl-usm).txt (Korean)

* New translations faq.txt (Catalan)

* New translations faq.txt (Bulgarian)

* New translations faq.txt (French)

* New translations faq.txt (Arabic)

* New translations faq.txt (Hebrew)

* New translations faq.txt (Hungarian)

* New translations faq.txt (Italian)

* New translations faq.txt (German)

* New translations faq.txt (Finnish)

* New translations faq.txt (Greek)

* New translations faq.txt (Czech)

* New translations faq.txt (Japanese)

* New translations faq.txt (Russian)

* New translations faq.txt (Portuguese)

* New translations faq.txt (Swedish)

* New translations faq.txt (Polish)

* New translations faq.txt (Dutch)

* New translations faq.txt (Norwegian)

* New translations faq.txt (Vietnamese)

* New translations faq.txt (Chinese Traditional)

* New translations faq.txt (Chinese Simplified)

* New translations faq.txt (Ukrainian)

* New translations faq.txt (Turkish)

* New translations faq.txt (Portuguese, Brazilian)

* New translations faq.txt (Indonesian)

* New translations faq.txt (Thai)

* New translations faq.txt (Croatian)

* New translations faq.txt (Malay)

* New translations faq.txt (Pirate English)

* New translations installing-boot9strap-(fredtool).txt (Italian)

* New translations installing-boot9strap-(hardmod).txt (Italian)

* New translations faq.txt (Italian)

* New translations installing-boot9strap-(ssloth-browser).txt (Italian)

* New translations troubleshooting.txt (Korean)

* New translations installing-boot9strap-(fredtool).txt (Italian)

* New translations installing-boot9strap-(usm).txt (Italian)

* New translations installing-boot9strap-(kartdlphax).txt (Italian)

* New translations bannerbomb3-fredtool-(twn).txt (Italian)

* New translations installing-boot9strap-(soundhax).txt (Italian)

* New translations installing-boot9strap-(hardmod).txt (Italian)

* New translations a9lh-to-b9s.txt (Italian)

* New translations updating-b9s.txt (Italian)

* New translations installing-boot9strap-(ntrboot).txt (Italian)

* New translations troubleshooting.txt (French)

* New translations troubleshooting.txt (Romanian)

* New translations troubleshooting.txt (Spanish)

* New translations troubleshooting.txt (Czech)

* New translations troubleshooting.txt (German)

* New translations troubleshooting.txt (Arabic)

* New translations troubleshooting.txt (Bulgarian)

* New translations troubleshooting.txt (Catalan)

* New translations troubleshooting.txt (Greek)

* New translations troubleshooting.txt (Hungarian)

* New translations troubleshooting.txt (Finnish)

* New translations troubleshooting.txt (Hebrew)

* New translations troubleshooting.txt (Italian)

* New translations troubleshooting.txt (Dutch)

* New translations troubleshooting.txt (Norwegian)

* New translations troubleshooting.txt (Japanese)

* New translations troubleshooting.txt (Swedish)

* New translations troubleshooting.txt (Turkish)

* New translations troubleshooting.txt (Russian)

* New translations troubleshooting.txt (Polish)

* New translations troubleshooting.txt (Portuguese)

* New translations troubleshooting.txt (Chinese Traditional)

* New translations troubleshooting.txt (Chinese Simplified)

* New translations troubleshooting.txt (Ukrainian)

* New translations troubleshooting.txt (Vietnamese)

* New translations troubleshooting.txt (Croatian)

* New translations troubleshooting.txt (Malay)

* New translations troubleshooting.txt (Portuguese, Brazilian)

* New translations troubleshooting.txt (Indonesian)

* New translations troubleshooting.txt (Thai)

* New translations installing-boot9strap-(hbl-usm).txt (Italian)

* New translations troubleshooting.txt (Pirate English)

* New translations get-started.txt (Portuguese, Brazilian)

* New translations finalizing-setup.txt (Portuguese, Brazilian)

* New translations installing-boot9strap-(fredtool).txt (Portuguese, Brazilian)

* New translations installing-boot9strap-(usm).txt (Portuguese, Brazilian)

* New translations homebrew-launcher-(pichaxx).txt (Portuguese, Brazilian)

* New translations installing-boot9strap-(kartdlphax).txt (Portuguese, Brazilian)

* New translations bannerbomb3-fredtool-(twn).txt (Portuguese, Brazilian)

* New translations installing-boot9strap-(hardmod).txt (Portuguese, Brazilian)

* New translations a9lh-to-b9s.txt (Portuguese, Brazilian)

* New translations updating-b9s.txt (Portuguese, Brazilian)

* New translations installing-boot9strap-(ntrboot).txt (Portuguese, Brazilian)

* New translations installing-boot9strap-(soundhax).txt (Portuguese, Brazilian)

* New translations troubleshooting.txt (Portuguese, Brazilian)

* New translations installing-boot9strap-(hbl-usm).txt (Portuguese, Brazilian)

* New translations faq.txt (Portuguese, Brazilian)

* New translations installing-boot9strap-(ssloth-browser).txt (Portuguese, Brazilian)

* New translations troubleshooting.txt (Portuguese, Brazilian)

* New translations site-navigation.txt (Portuguese, Brazilian)

* New translations installing-boot9strap-(ssloth-browser).txt (Portuguese, Brazilian)

_pages/ar_SA/a9lh-to-b9s.txt

@@ -62,6 +62,8 @@ For all steps in this section, overwrite any existing files on your SD card.
 1. When prompted, input the key combo given to install boot9strap
 1. Once it is complete, press (A) to reboot your device
 1. Your device should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
 1. Press (Start) to save and reboot
 

_pages/ar_SA/bannerbomb3-fredtool-(twn).txt

@@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
 
 Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.
 
-These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
+These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3).
 {: .notice--warning}
 
 ### What you need
@@ -132,19 +132,15 @@ If you would prefer a visual guide to this section, one is available [here](http
 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device
     + You may have to force power off by holding the power button
     + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
-    + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
+  + If you see the Luma Configuration screen, power off your device and continue to the next section
 
-#### Section VI - Luma3DS Verification
+#### Section VI - Luma3DS Configuration
 
-1. Power off your device
+1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration
-1. Insert your SD card into your computer
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+  + For the purpose of this guide, these settings will be left on default settings
-  + The existence of these folders and files confirms that Luma3DS is installed
+  + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
-  + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+1. Press (Start) to save and reboot
-
-At this point, your console will boot to Luma3DS by default.
-  + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-  + On the next page, you will install useful homebrew applications to complete your setup.
 
 #### Section VII - Restoring DS Download Play
 

_pages/ar_SA/faq.txt

@@ -4,11 +4,10 @@ title: "FAQ"
 {% include toc title="Table of Contents"%}
 
 {% capture notice-6 %}
-**3DS firmware 11.16.0 was recently released**. Here's what you should know:
+**The latest 3DS firmware is 11.16.0**. Here's what you should know:
 
 - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
 - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
-- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
 {% endcapture %}
 
 <div class="notice--warning">{{ notice-6 | markdownify }}</div>

_pages/ar_SA/home.txt

@@ -9,16 +9,6 @@ header:
 excerpt: "A complete guide to 3DS custom firmware, <br /> from stock to boot9strap.<br />"
 ---
 
-{% capture notice-6 %}
-**3DS firmware 11.16.0 was recently released**. Here's what you should know:
-
-- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
-- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
-- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
-{% endcapture %}
-
-<div class="notice--warning">{{ notice-6 | markdownify }}</div>
-
 Thoroughly read all of the introductory pages (including this one!) before proceeding.
 {: .notice--info}
 

_pages/ar_SA/installing-boot9strap-(fredtool).txt

@@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
   + You may have to force power off by holding the power button
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
-  + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
+  + If you see the Luma Configuration screen, power off your device and continue to the next section
 
-#### Section VI - Luma3DS Verification
+#### Section VI - Luma3DS Configuration
 
-Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created.
+1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration
-
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-1. Power off your device
+  + For the purpose of this guide, these settings will be left on default settings
-1. Insert your SD card into your computer
+  + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
-1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+1. Press (Start) to save and reboot
-  + The existence of these folders and files confirms that Luma3DS is installed
-  + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
 
 At this point, your console will boot to Luma3DS by default.
   + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.

_pages/ar_SA/installing-boot9strap-(hardmod).txt

@@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and
 1. Disconnect your hardmod
 1. Power on your device
 1. Your device should have booted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
   + If you get an error, just continue to the next page

_pages/ar_SA/installing-boot9strap-(hbl-usm).txt

@@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device.
   + If the top screen is blank, power off your device and re-do Section III
 1. Once it is complete, press (A) to reboot your device
 1. Your device should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
 

_pages/ar_SA/installing-boot9strap-(kartdlphax).txt

@@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device.
 1. When prompted, input the key combo given on the top screen to install boot9strap
   + If the top screen is blank, power off your device and re-do Section III
 1. Once it is complete, press (A) to reboot your device
-1. Your device should have rebooted into the Luma3DS configuration menu
+1. Your target 3DS should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
 

_pages/ar_SA/installing-boot9strap-(ntrboot).txt

@@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
 1. Reinsert your SD card into your device
 1. Power on your device
 1. Your device should have booted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
   + If you get an error, just continue to the next page

_pages/ar_SA/installing-boot9strap-(soundhax).txt

@@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device.
 1. When prompted, input the key combo given on the top screen to install boot9strap
 1. Once it is complete, press (A) to reboot your device
 1. Your device should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
   + If you get an error, just continue to the next page

_pages/ar_SA/installing-boot9strap-(usm).txt

@@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device.
   + If the top screen is blank, power off your device and re-do Section III
 1. Once it is complete, press (A) to reboot your device
 1. Your device should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
 

_pages/ar_SA/troubleshooting.txt

@@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur
 
 Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card.
 
-If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it.
+If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it.
 
 ### "An exception occurred" or Errdisp when opening Picross
 

_pages/ar_SA/updating-b9s.txt

@@ -51,6 +51,8 @@ For all steps in this section, overwrite any existing files on your SD card.
 1. Reinsert your SD card into your device
 1. Power on your device
 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
 
 ___
 

_pages/bg_BG/a9lh-to-b9s.txt

@@ -62,6 +62,8 @@ For all steps in this section, overwrite any existing files on your SD card.
 1. When prompted, input the key combo given to install boot9strap
 1. Once it is complete, press (A) to reboot your device
 1. Your device should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
 1. Press (Start) to save and reboot
 

_pages/bg_BG/bannerbomb3-fredtool-(twn).txt

@@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
 
 Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.
 
-These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
+These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3).
 {: .notice--warning}
 
 ### What you need
@@ -132,19 +132,15 @@ If you would prefer a visual guide to this section, one is available [here](http
 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device
     + You may have to force power off by holding the power button
     + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
-    + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
+  + If you see the Luma Configuration screen, power off your device and continue to the next section
 
-#### Section VI - Luma3DS Verification
+#### Section VI - Luma3DS Configuration
 
-1. Power off your device
+1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration
-1. Insert your SD card into your computer
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+  + For the purpose of this guide, these settings will be left on default settings
-  + The existence of these folders and files confirms that Luma3DS is installed
+  + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
-  + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+1. Press (Start) to save and reboot
-
-At this point, your console will boot to Luma3DS by default.
-  + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-  + On the next page, you will install useful homebrew applications to complete your setup.
 
 #### Section VII - Restoring DS Download Play
 

_pages/bg_BG/faq.txt

@@ -4,11 +4,10 @@ title: "FAQ"
 {% include toc title="Table of Contents"%}
 
 {% capture notice-6 %}
-**3DS firmware 11.16.0 was recently released**. Here's what you should know:
+**The latest 3DS firmware is 11.16.0**. Here's what you should know:
 
 - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
 - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
-- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
 {% endcapture %}
 
 <div class="notice--warning">{{ notice-6 | markdownify }}</div>

_pages/bg_BG/home.txt

@@ -9,16 +9,6 @@ header:
 excerpt: "A complete guide to 3DS custom firmware, <br /> from stock to boot9strap.<br />"
 ---
 
-{% capture notice-6 %}
-**3DS firmware 11.16.0 was recently released**. Here's what you should know:
-
-- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
-- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
-- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
-{% endcapture %}
-
-<div class="notice--warning">{{ notice-6 | markdownify }}</div>
-
 Thoroughly read all of the introductory pages (including this one!) before proceeding.
 {: .notice--info}
 

_pages/bg_BG/installing-boot9strap-(fredtool).txt

@@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
   + You may have to force power off by holding the power button
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
-  + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
+  + If you see the Luma Configuration screen, power off your device and continue to the next section
 
-#### Section VI - Luma3DS Verification
+#### Section VI - Luma3DS Configuration
 
-Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created.
+1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration
-
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-1. Power off your device
+  + For the purpose of this guide, these settings will be left on default settings
-1. Insert your SD card into your computer
+  + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
-1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+1. Press (Start) to save and reboot
-  + The existence of these folders and files confirms that Luma3DS is installed
-  + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
 
 At this point, your console will boot to Luma3DS by default.
   + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.

_pages/bg_BG/installing-boot9strap-(hardmod).txt

@@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and
 1. Disconnect your hardmod
 1. Power on your device
 1. Your device should have booted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
   + If you get an error, just continue to the next page

_pages/bg_BG/installing-boot9strap-(hbl-usm).txt

@@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device.
   + If the top screen is blank, power off your device and re-do Section III
 1. Once it is complete, press (A) to reboot your device
 1. Your device should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
 

_pages/bg_BG/installing-boot9strap-(kartdlphax).txt

@@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device.
 1. When prompted, input the key combo given on the top screen to install boot9strap
   + If the top screen is blank, power off your device and re-do Section III
 1. Once it is complete, press (A) to reboot your device
-1. Your device should have rebooted into the Luma3DS configuration menu
+1. Your target 3DS should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
 

_pages/bg_BG/installing-boot9strap-(ntrboot).txt

@@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
 1. Reinsert your SD card into your device
 1. Power on your device
 1. Your device should have booted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
   + If you get an error, just continue to the next page

_pages/bg_BG/installing-boot9strap-(soundhax).txt

@@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device.
 1. When prompted, input the key combo given on the top screen to install boot9strap
 1. Once it is complete, press (A) to reboot your device
 1. Your device should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
   + If you get an error, just continue to the next page

_pages/bg_BG/installing-boot9strap-(usm).txt

@@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device.
   + If the top screen is blank, power off your device and re-do Section III
 1. Once it is complete, press (A) to reboot your device
 1. Your device should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
 

_pages/bg_BG/troubleshooting.txt

@@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur
 
 Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card.
 
-If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it.
+If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it.
 
 ### "An exception occurred" or Errdisp when opening Picross
 

_pages/bg_BG/updating-b9s.txt

@@ -51,6 +51,8 @@ For all steps in this section, overwrite any existing files on your SD card.
 1. Reinsert your SD card into your device
 1. Power on your device
 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
 
 ___
 

_pages/ca_ES/a9lh-to-b9s.txt

@@ -62,6 +62,8 @@ For all steps in this section, overwrite any existing files on your SD card.
 1. When prompted, input the key combo given to install boot9strap
 1. Once it is complete, press (A) to reboot your device
 1. Your device should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
 1. Press (Start) to save and reboot
 

_pages/ca_ES/bannerbomb3-fredtool-(twn).txt

@@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
 
 Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.
 
-These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
+These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3).
 {: .notice--warning}
 
 ### What you need
@@ -132,19 +132,15 @@ If you would prefer a visual guide to this section, one is available [here](http
 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device
     + You may have to force power off by holding the power button
     + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
-    + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
+  + If you see the Luma Configuration screen, power off your device and continue to the next section
 
-#### Section VI - Luma3DS Verification
+#### Section VI - Luma3DS Configuration
 
-1. Power off your device
+1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration
-1. Insert your SD card into your computer
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+  + For the purpose of this guide, these settings will be left on default settings
-  + The existence of these folders and files confirms that Luma3DS is installed
+  + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
-  + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+1. Press (Start) to save and reboot
-
-At this point, your console will boot to Luma3DS by default.
-  + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-  + On the next page, you will install useful homebrew applications to complete your setup.
 
 #### Section VII - Restoring DS Download Play
 

_pages/ca_ES/faq.txt

@@ -4,11 +4,10 @@ title: "FAQ"
 {% include toc title="Table of Contents"%}
 
 {% capture notice-6 %}
-**3DS firmware 11.16.0 was recently released**. Here's what you should know:
+**The latest 3DS firmware is 11.16.0**. Here's what you should know:
 
 - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
 - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
-- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
 {% endcapture %}
 
 <div class="notice--warning">{{ notice-6 | markdownify }}</div>

_pages/ca_ES/home.txt

@@ -9,16 +9,6 @@ header:
 excerpt: "A complete guide to 3DS custom firmware, <br /> from stock to boot9strap.<br />"
 ---
 
-{% capture notice-6 %}
-**3DS firmware 11.16.0 was recently released**. Here's what you should know:
-
-- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
-- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
-- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
-{% endcapture %}
-
-<div class="notice--warning">{{ notice-6 | markdownify }}</div>
-
 Thoroughly read all of the introductory pages (including this one!) before proceeding.
 {: .notice--info}
 

_pages/ca_ES/installing-boot9strap-(fredtool).txt

@@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
   + You may have to force power off by holding the power button
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
-  + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
+  + If you see the Luma Configuration screen, power off your device and continue to the next section
 
-#### Section VI - Luma3DS Verification
+#### Section VI - Luma3DS Configuration
 
-Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created.
+1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration
-
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-1. Power off your device
+  + For the purpose of this guide, these settings will be left on default settings
-1. Insert your SD card into your computer
+  + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
-1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+1. Press (Start) to save and reboot
-  + The existence of these folders and files confirms that Luma3DS is installed
-  + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
 
 At this point, your console will boot to Luma3DS by default.
   + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.

_pages/ca_ES/installing-boot9strap-(hardmod).txt

@@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and
 1. Disconnect your hardmod
 1. Power on your device
 1. Your device should have booted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
   + If you get an error, just continue to the next page

_pages/ca_ES/installing-boot9strap-(hbl-usm).txt

@@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device.
   + If the top screen is blank, power off your device and re-do Section III
 1. Once it is complete, press (A) to reboot your device
 1. Your device should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
 

_pages/ca_ES/installing-boot9strap-(kartdlphax).txt

@@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device.
 1. When prompted, input the key combo given on the top screen to install boot9strap
   + If the top screen is blank, power off your device and re-do Section III
 1. Once it is complete, press (A) to reboot your device
-1. Your device should have rebooted into the Luma3DS configuration menu
+1. Your target 3DS should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
 

_pages/ca_ES/installing-boot9strap-(ntrboot).txt

@@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
 1. Reinsert your SD card into your device
 1. Power on your device
 1. Your device should have booted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
   + If you get an error, just continue to the next page

_pages/ca_ES/installing-boot9strap-(soundhax).txt

@@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device.
 1. When prompted, input the key combo given on the top screen to install boot9strap
 1. Once it is complete, press (A) to reboot your device
 1. Your device should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
   + If you get an error, just continue to the next page

_pages/ca_ES/installing-boot9strap-(usm).txt

@@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device.
   + If the top screen is blank, power off your device and re-do Section III
 1. Once it is complete, press (A) to reboot your device
 1. Your device should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
 

_pages/ca_ES/troubleshooting.txt

@@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur
 
 Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card.
 
-If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it.
+If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it.
 
 ### "An exception occurred" or Errdisp when opening Picross
 

_pages/ca_ES/updating-b9s.txt

@@ -51,6 +51,8 @@ For all steps in this section, overwrite any existing files on your SD card.
 1. Reinsert your SD card into your device
 1. Power on your device
 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
 
 ___
 

_pages/cs_CZ/a9lh-to-b9s.txt

@@ -62,6 +62,8 @@ For all steps in this section, overwrite any existing files on your SD card.
 1. When prompted, input the key combo given to install boot9strap
 1. Once it is complete, press (A) to reboot your device
 1. Your device should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
 1. Press (Start) to save and reboot
 

_pages/cs_CZ/bannerbomb3-fredtool-(twn).txt

@@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
 
 Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.
 
-These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
+These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3).
 {: .notice--warning}
 
 ### What you need
@@ -132,19 +132,15 @@ If you would prefer a visual guide to this section, one is available [here](http
 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device
     + You may have to force power off by holding the power button
     + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
-    + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
+  + If you see the Luma Configuration screen, power off your device and continue to the next section
 
-#### Section VI - Luma3DS Verification
+#### Section VI - Luma3DS Configuration
 
-1. Power off your device
+1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration
-1. Insert your SD card into your computer
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+  + For the purpose of this guide, these settings will be left on default settings
-  + The existence of these folders and files confirms that Luma3DS is installed
+  + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
-  + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+1. Press (Start) to save and reboot
-
-At this point, your console will boot to Luma3DS by default.
-  + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-  + On the next page, you will install useful homebrew applications to complete your setup.
 
 #### Section VII - Restoring DS Download Play
 

_pages/cs_CZ/faq.txt

@@ -4,11 +4,10 @@ title: "FAQ"
 {% include toc title="Table of Contents"%}
 
 {% capture notice-6 %}
-**3DS firmware 11.16.0 was recently released**. Here's what you should know:
+**The latest 3DS firmware is 11.16.0**. Here's what you should know:
 
 - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
 - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
-- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
 {% endcapture %}
 
 <div class="notice--warning">{{ notice-6 | markdownify }}</div>

_pages/cs_CZ/home.txt

@@ -9,16 +9,6 @@ header:
 excerpt: "A complete guide to 3DS custom firmware, <br /> from stock to boot9strap.<br />"
 ---
 
-{% capture notice-6 %}
-**3DS firmware 11.16.0 was recently released**. Here's what you should know:
-
-- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
-- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
-- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
-{% endcapture %}
-
-<div class="notice--warning">{{ notice-6 | markdownify }}</div>
-
 Thoroughly read all of the introductory pages (including this one!) before proceeding.
 {: .notice--info}
 

_pages/cs_CZ/installing-boot9strap-(fredtool).txt

@@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
   + You may have to force power off by holding the power button
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
-  + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
+  + If you see the Luma Configuration screen, power off your device and continue to the next section
 
-#### Section VI - Luma3DS Verification
+#### Section VI - Luma3DS Configuration
 
-Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created.
+1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration
-
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-1. Power off your device
+  + For the purpose of this guide, these settings will be left on default settings
-1. Insert your SD card into your computer
+  + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
-1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+1. Press (Start) to save and reboot
-  + The existence of these folders and files confirms that Luma3DS is installed
-  + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
 
 At this point, your console will boot to Luma3DS by default.
   + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.

_pages/cs_CZ/installing-boot9strap-(hardmod).txt

@@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and
 1. Disconnect your hardmod
 1. Power on your device
 1. Your device should have booted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
   + If you get an error, just continue to the next page

_pages/cs_CZ/installing-boot9strap-(hbl-usm).txt

@@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device.
   + If the top screen is blank, power off your device and re-do Section III
 1. Once it is complete, press (A) to reboot your device
 1. Your device should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
 

_pages/cs_CZ/installing-boot9strap-(kartdlphax).txt

@@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device.
 1. When prompted, input the key combo given on the top screen to install boot9strap
   + If the top screen is blank, power off your device and re-do Section III
 1. Once it is complete, press (A) to reboot your device
-1. Your device should have rebooted into the Luma3DS configuration menu
+1. Your target 3DS should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
 

_pages/cs_CZ/installing-boot9strap-(ntrboot).txt

@@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
 1. Reinsert your SD card into your device
 1. Power on your device
 1. Your device should have booted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
   + If you get an error, just continue to the next page

_pages/cs_CZ/installing-boot9strap-(soundhax).txt

@@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device.
 1. When prompted, input the key combo given on the top screen to install boot9strap
 1. Once it is complete, press (A) to reboot your device
 1. Your device should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
   + If you get an error, just continue to the next page

_pages/cs_CZ/installing-boot9strap-(usm).txt

@@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device.
   + If the top screen is blank, power off your device and re-do Section III
 1. Once it is complete, press (A) to reboot your device
 1. Your device should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
 

_pages/cs_CZ/troubleshooting.txt

@@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur
 
 Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card.
 
-If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it.
+If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it.
 
 ### "An exception occurred" or Errdisp when opening Picross
 

_pages/cs_CZ/updating-b9s.txt

@@ -51,6 +51,8 @@ For all steps in this section, overwrite any existing files on your SD card.
 1. Reinsert your SD card into your device
 1. Power on your device
 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
 
 ___
 

_pages/de_DE/a9lh-to-b9s.txt

@@ -62,6 +62,8 @@ Beachte, dass auf dem New 3DS die `secret_sector.bin` benötigt wird, um den arm
 1. Gib die Tastenkombination zur Bestätigung ein, wenn danach verlangt wird
 1. Sobald dies abgeschlossen ist, drücke (A) um das Gerät neuzustarten
 1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   Falls du auf einem schwarzen Bildschirm steckenbleibst, [folge dieser Anleitung zur Fehlerbehebung](troubleshooting#boot-related-issues-on-modded-devices)
 1. Drücke (Start) zum Speichern und neustarten
 

_pages/de_DE/bannerbomb3-fredtool-(twn).txt

@@ -12,7 +12,7 @@ Um das zu erreichen, werden wir die Verschlüsselung (movable.sed) nutzen, um ei
 
 Wenn du ein DSiWare-Backup hast, kann ein ausnutzbarer DSiWare-Titel in DS Download Play injiziert werden, der dann genutzt wird, um Custom Firmware zu installieren.
 
-Diese Anleitung ist NUR für taiwanesische Konsolen (erkennbar an dem T am Ende der Systemversion, zum Beispiel 11.16.0-39T)! Wenn deine Konsole eine andere Region hat, [benutze eine andere Methode](seedminer#next-steps).
+Diese Anleitung ist NUR für taiwanesische Konsolen (erkennbar an dem T am Ende der Systemversion, zum Beispiel 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3).
 {: .notice--warning}
 
 ### Was du benötigst
@@ -80,7 +80,7 @@ Wenn du ein Konfigurations-Menü siehst, hast du schon Custom Firmware und wenn
      + Folgendes sollte in dieser Reihenfolge passieren: Ein Progress swirl, kurzes Einfrieren der Bildschirme, der untere Bildschirm wird violett, die Musik hört auf, der 3DS zeigt eine Fehlermeldung und startet sich neu
     + Wenn du den violetten Bildschirm nicht gesehen hast, ist etwas schiefgegangen
 1. Du solltest nun die `42383821.bin` Datei im Stammverzeichnis deiner SD-Karte haben
-1. Gehe zu `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` auf deiner SD-Karte 
+1. Navigiere zu `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` auf deiner SD-Karte 
 1. Lösche alle `.bin` Dateien im `Nintendo DSiWare` Ordner
 
 #### Abschnitt IV - Fredtool
@@ -101,7 +101,7 @@ Wenn du ein Konfigurations-Menü siehst, hast du schon Custom Firmware und wenn
 1. Kopiere die `484E4441.bin` Datei von dem `hax` Ordner des heruntergeladenen DSiWare-Archives (output_(name).zip) in den `Nintendo DSiWare` Ordner
 1. Stecke deine SD-Karte nun wieder in deinen 3DS
 1. Schalte deine Konsole an
-1. Starte die Systemeinstellungen auf deiner Konsole
+1. Starte die Systemeinstellungen auf deinem 3DS
 1. Navigiere zu "Data Management" -> "DSiWare"
 1. Beim "SD Card" Abschnitt, wähle den "Haxxxxxxxxx!" Titel
 1. Drücke "Copy", und dann "OK"
@@ -132,27 +132,23 @@ If you would prefer a visual guide to this section, one is available [here](http
 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device
     + Unter Umständen musst du das Ausschalten der Konsole erzwingen indem du den Power-Knopf gedrückt hälst
     + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
-    + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
+  + If you see the Luma Configuration screen, power off your device and continue to the next section
 
-#### Section VI - Luma3DS Verification
+#### Section VI - Luma3DS Configuration
 
-1. Schalte deinen 3DS aus
+1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration
-1. Stecke deine SD-Karte in deinen Computer
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+  + For the purpose of this guide, these settings will be left on default settings
-  + The existence of these folders and files confirms that Luma3DS is installed
+  + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
-  + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+1. Drücke (Start) zum Speichern und neustarten
-
-At this point, your console will boot to Luma3DS by default.
-  + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-  + On the next page, you will install useful homebrew applications to complete your setup.
 
 #### Abschnitt VII - DS Download-Spiel wiederherstellen
 
-1. Navigiere zu `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` auf deiner SD-Karte 
+1. Gehe zu `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` auf deiner SD-Karte 
 1. Copy the `484E4441.bin`  file from the `clean` folder of the downloaded DSiWare archive (output_(name).zip) to the `Nintendo DSiWare` folder
 1. Stecke deine SD-Karte nun wieder in deinen 3DS
 1. Schalte deine Konsole an
-1. Launch System Settings on your device
+1. Starte die Systemeinstellungen auf deiner Konsole
 1. Navigiere zu "Data Management" -> "DSiWare"
 1. Beim "SD Card" Abschnitt, wähle den "Haxxxxxxxxx!" Titel
 1. Drücke "Copy", und dann "OK"

_pages/de_DE/faq.txt

@@ -4,11 +4,10 @@ title: "FAQ"
 {% include toc title="Inhalt"%}
 
 {% capture notice-6 %}
-**3DS Firmware 11.16.0 wurde vor Kurzem veröffentlicht**. Hier ist, was du wissen solltest:
+**The latest 3DS firmware is 11.16.0**. Hier ist, was du wissen solltest:
 
 Wenn auf deiner Konsole *Luma 11.0* läuft, ist es *100% sicher* zu updaten. Du kannst deine Luma Version überprüfen, indem du (Select) gedrückt hältst während du deine Konsole hochfährst.
 - Wenn auf deiner Konsole eine ältere Luma Version installiert ist, solltest du [Luma updaten](checking-for-cfw) bevor du deine Konsole auf 11.16 aktualisierst.
-- Wenn dein Gerät noch keine Custom Firmware hat, kannst du sie immer noch gratis ohne zusätzliche Hardware auf dieser Version installieren, aber die empfohlene Methode wurde geändert.
 {% endcapture %}
 
 <div class="notice--warning">{{ notice-6 | markdownify }}</div>

_pages/de_DE/home.txt

@@ -9,16 +9,6 @@ header:
 excerpt: "Eine vollständige Anleitung für 3DS Custom Firmware, <br />von original zu boot9strap.<br />" #
 ---
 
-{% capture notice-6 %}
-**3DS Firmware 11.16.0 wurde vor Kurzem veröffentlicht**. Hier ist, was du wissen solltest:
-
-Wenn auf deiner Konsole *Luma 11.0* läuft, ist es *100% sicher* zu updaten. Du kannst deine Luma Version überprüfen, indem du (Select) gedrückt hältst während du deine Konsole hochfährst.
-- Wenn auf deiner Konsole eine ältere Luma Version installiert ist, solltest du [Luma updaten](checking-for-cfw) bevor du deine Konsole auf 11.16 aktualisierst.
-- Wenn dein Gerät noch keine Custom Firmware hat, kannst du sie immer noch gratis ohne zusätzliche Hardware auf dieser Version installieren, aber die empfohlene Methode wurde geändert.
-{% endcapture %}
-
-<div class="notice--warning">{{ notice-6 | markdownify }}</div>
-
 Lies alle Einleitungsseiten gründlich durch (einschließlich dieser), bevor du fortfährst.
 {: .notice--info}
 

_pages/de_DE/installing-boot9strap-(fredtool).txt

@@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
   + Unter Umständen musst du das Ausschalten der Konsole erzwingen indem du den Power-Knopf gedrückt hälst
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
-  + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
+  + If you see the Luma Configuration screen, power off your device and continue to the next section
 
-#### Section VI - Luma3DS Verification
+#### Section VI - Luma3DS Configuration
 
-Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created.
+1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration
-
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-1. Schalte deinen 3DS aus
+  + For the purpose of this guide, these settings will be left on default settings
-1. Stecke deine SD-Karte in deinen Computer
+  + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
-1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+1. Drücke (Start) zum Speichern und neustarten
-  + The existence of these folders and files confirms that Luma3DS is installed
-  + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
 
 At this point, your console will boot to Luma3DS by default.
   + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.

_pages/de_DE/installing-boot9strap-(hardmod).txt

@@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and
 1. Entferne deinen Hardmod
 1. Schalte deine Konsole an
 1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Drücke (Start) zum Speichern und neustarten
   + If you get an error, just continue to the next page

_pages/de_DE/installing-boot9strap-(hbl-usm).txt

@@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device.
   + If the top screen is blank, power off your device and re-do Section III
 1. Sobald dies abgeschlossen ist, drücke (A) um das Gerät neuzustarten
 1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Drücke (Start) zum Speichern und neustarten
 

_pages/de_DE/installing-boot9strap-(kartdlphax).txt

@@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device.
 1. When prompted, input the key combo given on the top screen to install boot9strap
   + If the top screen is blank, power off your device and re-do Section III
 1. Sobald dies abgeschlossen ist, drücke (A) um das Gerät neuzustarten
-1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen
+1. Your target 3DS should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Drücke (Start) zum Speichern und neustarten
 

_pages/de_DE/installing-boot9strap-(ntrboot).txt

@@ -63,6 +63,8 @@ Um die [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme)-Links auf dieser S
 1. Stecke deine SD-Karte wieder in deine Konsole
 1. Schalte deine Konsole an
 1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Drücke (Start) um zu Speichern und neu zu starten
   + If you get an error, just continue to the next page
@@ -125,12 +127,12 @@ Folge diesen Schritten erst, wenn du den Rest der Anweisungen auf dieser Seite a
 
 1. Schalte deine Konsole aus
 1. Stecke deine SD-Karte in deinen Computer
-  + Die SD-Karte deines 3DS und *nicht* die SD-Karte deiner Flashkarte
+  + Die SD-Karte deines 3DS, *nicht* die SD-Karte deiner Flashkarte
 1. Erstelle einen Ordner mit dem Namen `ntrboot` im Stammverzeichnis deiner SD-Karte
 1. Kopiere die `.bin`-Datei von deiner Flashrom-Backup `.zip` in den Ordner `/ntrboot/` auf dem Stammverzeichnis der SD-Karte
 1. Erstelle einen Ordner mit dem Namen `payloads` im `luma`-Ordner auf deiner SD-Karte
 1. Kopiere `ntrboot_flasher.firm` in den `/luma/payloads` Ordner der SD-Karte
-1. Stecke die SD-Karte wieder in deine Konsole ein
+1. Stecke deine SD-Karte wieder in deine Konsole
 1. Stecke die ntrboot-kompatible DS / DSi Flashkarte in deine Konsole
 1. Starte ntrboot_flasher, indem du während dem Starten deiner Konsole die Taste (Start) gedrückt hältst
 1. Lies die Warnung auf dem roten Bildschirm

_pages/de_DE/installing-boot9strap-(soundhax).txt

@@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device.
 1. When prompted, input the key combo given on the top screen to install boot9strap
 1. Sobald dies abgeschlossen ist, drücke (A) um das Gerät neuzustarten
 1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Drücke (Start) zum Speichern und neustarten
   + If you get an error, just continue to the next page

_pages/de_DE/installing-boot9strap-(usm).txt

@@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device.
   + If the top screen is blank, power off your device and re-do Section III
 1. Sobald dies abgeschlossen ist, drücke (A) um das Gerät neuzustarten
 1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Drücke (Start) zum Speichern und neustarten
 

_pages/de_DE/troubleshooting.txt

@@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur
 
 Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card.
 
-If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Füge die `.bin` Erweiterung nicht hinzu, wenn du sie noch nicht siehst.
+If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Füge die `.bin` Erweiterung nicht hinzu, wenn du sie noch nicht siehst.
 
 ### "An exception occurred" or Errdisp when opening Picross
 
@@ -411,7 +411,7 @@ This can occur after a CTRTransfer or region change on Old 3DS / 2DS. You will n
 
 ### Clear HOME Menu extdata
 
-1. Schalte deinen 3DS aus
+1. Schalte deine Konsole aus
 1. Stecke deine SD-Karte in deinen Computer
 1. Navigate to the `/Nintendo 3DS/<ID0>/<ID1>/extdata/00000000/` folder on your SD card
 1. Delete the corresponding folder for your 3DS region:

_pages/de_DE/updating-b9s.txt

@@ -51,6 +51,8 @@ Obwohl wir glauben, dass die Nutzung von Custom Firmware online sicher ist, gab
 1. Stecke deine SD-Karte nun wieder in deinen 3DS
 1. Schalte deine Konsole an
 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
 
 ___
 

_pages/el_GR/a9lh-to-b9s.txt

@@ -62,6 +62,8 @@ For all steps in this section, overwrite any existing files on your SD card.
 1. When prompted, input the key combo given to install boot9strap
 1. Once it is complete, press (A) to reboot your device
 1. Your device should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
 1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση
 

_pages/el_GR/bannerbomb3-fredtool-(twn).txt

@@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
 
 Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.
 
-These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
+These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3).
 {: .notice--warning}
 
 ### What you need
@@ -132,19 +132,15 @@ If you would prefer a visual guide to this section, one is available [here](http
 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device
     + You may have to force power off by holding the power button
     + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
-    + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
+  + If you see the Luma Configuration screen, power off your device and continue to the next section
 
-#### Section VI - Luma3DS Verification
+#### Section VI - Luma3DS Configuration
 
-1. Power off your device
+1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration
-1. Εισάγετε την κάρτα SD στον υπολογιστή σας
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+  + For the purpose of this guide, these settings will be left on default settings
-  + The existence of these folders and files confirms that Luma3DS is installed
+  + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
-  + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση
-
-At this point, your console will boot to Luma3DS by default.
-  + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-  + On the next page, you will install useful homebrew applications to complete your setup.
 
 #### Section VII - Restoring DS Download Play
 

_pages/el_GR/faq.txt

@@ -4,11 +4,10 @@ title: "FAQ"
 {% include toc title="Table of Contents"%}
 
 {% capture notice-6 %}
-**3DS firmware 11.16.0 was recently released**. Here's what you should know:
+**The latest 3DS firmware is 11.16.0**. Here's what you should know:
 
 - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
 - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
-- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
 {% endcapture %}
 
 <div class="notice--warning">{{ notice-6 | markdownify }}</div>

_pages/el_GR/home.txt

@@ -9,16 +9,6 @@ header:
 excerpt: "A complete guide to 3DS custom firmware, <br /> from stock to boot9strap.<br />"
 ---
 
-{% capture notice-6 %}
-**3DS firmware 11.16.0 was recently released**. Here's what you should know:
-
-- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
-- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
-- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
-{% endcapture %}
-
-<div class="notice--warning">{{ notice-6 | markdownify }}</div>
-
 Thoroughly read all of the introductory pages (including this one!) before proceeding.
 {: .notice--info}
 

_pages/el_GR/installing-boot9strap-(fredtool).txt

@@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
   + You may have to force power off by holding the power button
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
-  + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
+  + If you see the Luma Configuration screen, power off your device and continue to the next section
 
-#### Section VI - Luma3DS Verification
+#### Section VI - Luma3DS Configuration
 
-Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created.
+1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration
-
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-1. Power off your device
+  + For the purpose of this guide, these settings will be left on default settings
-1. Εισάγετε την κάρτα SD στον υπολογιστή σας
+  + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
-1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση
-  + The existence of these folders and files confirms that Luma3DS is installed
-  + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
 
 At this point, your console will boot to Luma3DS by default.
   + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.

_pages/el_GR/installing-boot9strap-(hardmod).txt

@@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and
 1. Disconnect your hardmod
 1. Power on your device
 1. Your device should have booted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση
   + If you get an error, just continue to the next page

_pages/el_GR/installing-boot9strap-(hbl-usm).txt

@@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device.
   + If the top screen is blank, power off your device and re-do Section III
 1. Once it is complete, press (A) to reboot your device
 1. Your device should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση
 

_pages/el_GR/installing-boot9strap-(kartdlphax).txt

@@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device.
 1. When prompted, input the key combo given on the top screen to install boot9strap
   + If the top screen is blank, power off your device and re-do Section III
 1. Once it is complete, press (A) to reboot your device
-1. Your device should have rebooted into the Luma3DS configuration menu
+1. Your target 3DS should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση
 

_pages/el_GR/installing-boot9strap-(ntrboot).txt

@@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
 1. Reinsert your SD card into your device
 1. Power on your device
 1. Your device should have booted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση
   + If you get an error, just continue to the next page

_pages/el_GR/installing-boot9strap-(soundhax).txt

@@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device.
 1. When prompted, input the key combo given on the top screen to install boot9strap
 1. Once it is complete, press (A) to reboot your device
 1. Your device should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση
   + If you get an error, just continue to the next page

_pages/el_GR/installing-boot9strap-(usm).txt

@@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device.
   + If the top screen is blank, power off your device and re-do Section III
 1. Once it is complete, press (A) to reboot your device
 1. Your device should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση
 

_pages/el_GR/troubleshooting.txt

@@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur
 
 Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card.
 
-If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it.
+If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it.
 
 ### "An exception occurred" or Errdisp when opening Picross
 

_pages/el_GR/updating-b9s.txt

@@ -51,6 +51,8 @@ For all steps in this section, overwrite any existing files on your SD card.
 1. Reinsert your SD card into your device
 1. Power on your device
 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
 
 ___
 

_pages/en_PT/a9lh-to-b9s.txt

@@ -62,6 +62,8 @@ Fer all steps in 'tis section, overwrite any existin' files on ye SD card.
 1. When prompted, input th' key combo given to be installin' boot9strap
 1. Once it is complete, press (A) to reboot your device
 1. Ye device should have rebooted into th' Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
 1. Press (Start) to save 'n reboot
 

_pages/en_PT/bannerbomb3-fredtool-(twn).txt

@@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
 
 Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.
 
-These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
+These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3).
 {: .notice--warning}
 
 ### What you need
@@ -132,19 +132,15 @@ If you would prefer a visual guide to this section, one is available [here](http
 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device
     + You may have to force power off by holding the power button
     + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
-    + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
+  + If you see the Luma Configuration screen, power off your device and continue to the next section
 
-#### Section VI - Luma3DS Verification
+#### Section VI - Luma3DS Configuration
 
-1. Power off ye device
+1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration
-1. Insert ye SD card into ye computer
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+  + For the purpose of this guide, these settings will be left on default settings
-  + The existence of these folders and files confirms that Luma3DS is installed
+  + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
-  + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+1. Press (Start) to save 'n reboot
-
-At this point, your console will boot to Luma3DS by default.
-  + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-  + On the next page, you will install useful homebrew applications to complete your setup.
 
 #### Section VII - Restoring DS Download Play
 

_pages/en_PT/faq.txt

@@ -4,11 +4,10 @@ title: "FAQ"
 {% include toc title="Table of Contents"%}
 
 {% capture notice-6 %}
-**3DS firmware 11.16.0 was recently released**. Here's what you should know:
+**The latest 3DS firmware is 11.16.0**. Here's what you should know:
 
 - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
 - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
-- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
 {% endcapture %}
 
 <div class="notice--warning">{{ notice-6 | markdownify }}</div>

_pages/en_PT/home.txt

@@ -9,16 +9,6 @@ header:
 excerpt: "A complete guide to 3DS custom firmware, <br /> from stock to boot9strap.<br />"
 ---
 
-{% capture notice-6 %}
-**3DS firmware 11.16.0 was recently released**. Here's what you should know:
-
-- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
-- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
-- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
-{% endcapture %}
-
-<div class="notice--warning">{{ notice-6 | markdownify }}</div>
-
 Thoroughly read all 'o th' introductory pages (includin' 'tis one!) before proceedin' onward.
 {: .notice--info}
 

_pages/en_PT/installing-boot9strap-(fredtool).txt

@@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
   + You may have to force power off by holding the power button
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
-  + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
+  + If you see the Luma Configuration screen, power off your device and continue to the next section
 
-#### Section VI - Luma3DS Verification
+#### Section VI - Luma3DS Configuration
 
-Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created.
+1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration
-
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-1. Power off ye device
+  + For the purpose of this guide, these settings will be left on default settings
-1. Insert ye SD card into ye computer
+  + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
-1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+1. Press (Start) to save 'n reboot
-  + The existence of these folders and files confirms that Luma3DS is installed
-  + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
 
 At this point, your console will boot to Luma3DS by default.
   + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.

_pages/en_PT/installing-boot9strap-(hardmod).txt

@@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and
 1. Disconnect your hardmod
 1. Power on your device
 1. Your device should have booted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save 'n reboot
   + If you get an error, just continue to the next page

_pages/en_PT/installing-boot9strap-(hbl-usm).txt

@@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device.
   + If the top screen is blank, power off your device and re-do Section III
 1. Once it is complete, press (A) to reboot your device
 1. Ye device should have rebooted into th' Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save 'n reboot
 

_pages/en_PT/installing-boot9strap-(kartdlphax).txt

@@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device.
 1. When prompted, input the key combo given on the top screen to install boot9strap
   + If the top screen is blank, power off your device and re-do Section III
 1. Once it is complete, press (A) to reboot your device
-1. Ye device should have rebooted into th' Luma3DS configuration menu
+1. Your target 3DS should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save 'n reboot
 

_pages/en_PT/installing-boot9strap-(ntrboot).txt

@@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
 1. Reinsert ye SD card into ye device
 1. Power on your device
 1. Your device should have booted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save 'n reboot
   + If you get an error, just continue to the next page

_pages/en_PT/installing-boot9strap-(soundhax).txt

@@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device.
 1. When prompted, input the key combo given on the top screen to install boot9strap
 1. Once it is complete, press (A) to reboot your device
 1. Ye device should have rebooted into th' Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save 'n reboot
   + If you get an error, just continue to the next page

_pages/en_PT/installing-boot9strap-(usm).txt

@@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device.
   + If the top screen is blank, power off your device and re-do Section III
 1. Once it is complete, press (A) to reboot your device
 1. Ye device should have rebooted into th' Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save 'n reboot
 

_pages/en_PT/troubleshooting.txt

@@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur
 
 Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card.
 
-If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it.
+If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it.
 
 ### "An exception occurred" or Errdisp when opening Picross
 

_pages/en_PT/updating-b9s.txt

@@ -51,6 +51,8 @@ Fer all steps in 'tis section, overwrite any existin' files on ye SD card.
 1. Reinsert ye SD card into ye device
 1. Power on your device
 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
 
 ___
 

_pages/es_ES/a9lh-to-b9s.txt

@@ -63,6 +63,8 @@ Para todos los pasos en esta sección, sobreescribe cualquier archivo repetido e
 1. Cuando se solicite, introduce la combinación de botones mostrada para instalar boot9strap
 1. Once it is complete, press (A) to reboot your device
 1. Tu consola debería haber reiniciado en el menú de configuración de Luma3DS
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + Si la pantalla se queda en negro, [sigue la guía de solución de problemas](troubleshooting#boot-related-issues-on-modded-devices)
 1. Presiona (Start) para guardar y reiniciar
 

_pages/es_ES/bannerbomb3-fredtool-(twn).txt

@@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
 
 Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.
 
-These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
+These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3).
 {: .notice--warning}
 
 ### What you need
@@ -132,19 +132,15 @@ Si prefieres una guía visual para esta parte, hay una disponible [aquí](https:
 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device
     + Puede que tengas que forzar el apagado manteniendo pulsado el botón de encendido
     + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
-    + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
+  + If you see the Luma Configuration screen, power off your device and continue to the next section
 
-#### Section VI - Luma3DS Verification
+#### Section VI - Luma3DS Configuration
 
-1. Apaga tu consola
+1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration
-1. Inserta tu tarjeta SD en tu computadora
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+  + For the purpose of this guide, these settings will be left on default settings
-  + The existence of these folders and files confirms that Luma3DS is installed
+  + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
-  + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+1. Presiona (Start) para guardar y reiniciar
-
-At this point, your console will boot to Luma3DS by default.
-  + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-  + On the next page, you will install useful homebrew applications to complete your setup.
 
 #### Section VII - Restoring DS Download Play
 

_pages/es_ES/faq.txt

@@ -4,11 +4,10 @@ title: "Preguntas Frecuentes"
 {% include toc title="Tabla de Contenidos"%}
 
 {% capture notice-6 %}
-**3DS firmware 11.16.0 was recently released**. Esto es lo que deberías saber:
+**The latest 3DS firmware is 11.16.0**. Esto es lo que deberías saber:
 
 - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
 - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
-- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
 {% endcapture %}
 
 <div class="notice--warning">{{ notice-6 | markdownify }}</div>

_pages/es_ES/home.txt

@@ -9,16 +9,6 @@ header:
 excerpt: "Una guía completa de custom firmware para 3DS, <br /> desde stock a boot9strap.<br />"
 ---
 
-{% capture notice-6 %}
-**3DS firmware 11.16.0 was recently released**. Esto es lo que deberías saber:
-
-- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device.
-- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0.
-- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed.
-{% endcapture %}
-
-<div class="notice--warning">{{ notice-6 | markdownify }}</div>
-
 Lee detenidamente todas las páginas de introducción (incluido ésta) antes de proceder.
 {: .notice--info}
 

_pages/es_ES/installing-boot9strap-(fredtool).txt

@@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Una vez completado y con la pantalla inferior diciendo "done.", sal de b9sTool, y luego apaga tu consola
   + Puede que tengas que forzar el apagado manteniendo pulsado el botón de encendido
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
-  + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
+  + If you see the Luma Configuration screen, power off your device and continue to the next section
 
-#### Section VI - Luma3DS Verification
+#### Section VI - Luma3DS Configuration
 
-Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created.
+1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration
-
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-1. Apaga tu consola
+  + For the purpose of this guide, these settings will be left on default settings
-1. Inserta tu tarjeta SD en tu computadora
+  + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
-1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+1. Presiona (Start) para guardar y reiniciar
-  + The existence of these folders and files confirms that Luma3DS is installed
-  + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
 
 At this point, your console will boot to Luma3DS by default.
   + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.

_pages/es_ES/installing-boot9strap-(hardmod).txt

@@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and
 1. Desconecta tu hardmod
 1. Enciende tu consola
 1. Tu consola debería haber iniciado en el menú de configuración de Luma3DS
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Presiona (Start) para guardar y reiniciar
   + If you get an error, just continue to the next page

_pages/es_ES/installing-boot9strap-(hbl-usm).txt

@@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device.
   + If the top screen is blank, power off your device and re-do Section III
 1. Once it is complete, press (A) to reboot your device
 1. Tu consola debería haber reiniciado en el menú de configuración de Luma3DS
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Presiona (Start) para guardar y reiniciar
 

_pages/es_ES/installing-boot9strap-(kartdlphax).txt

@@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device.
 1. Cuando se te pida, introduce la combinación de botones mostrada para instalar boot9strap
   + If the top screen is blank, power off your device and re-do Section III
 1. Once it is complete, press (A) to reboot your device
-1. Tu consola debería haber reiniciado en el menú de configuración de Luma3DS
+1. Your target 3DS should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Presiona (Start) para guardar y reiniciar
 

_pages/es_ES/installing-boot9strap-(ntrboot).txt

@@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
 1. Vuelve a insertar tu tarjeta SD en tu consola
 1. Enciende tu consola
 1. Tu consola debería haber iniciado en el menú de configuración de Luma3DS
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Presiona (Start) para guardar y reiniciar
   + If you get an error, just continue to the next page
@@ -125,7 +127,7 @@ No sigas esta sección mientras no hayas completado el resto de instrucciones de
 
 1. Apaga tu consola
 1. Inserta tu tarjeta SD en tu computadora
-  + Ésta es la tarjeta SD de tu 3DS, *no* la tarjeta SD de tu flashcart
+  + Esta es la tarjeta SD de tu 3DS, *no* la tarjeta SD de tu flashcart
 1. Crea una carpeta llamada`ntrboot` en la raíz de tu tarjeta SD
 1. Copia el archivo `.bin` desde el archivo `.zip` de respaldo de flashrom a la carpeta `/ntrboot/` en la raíz de tu tarjeta SD
 1. Crea una carpeta llamada `payloads` en la carpeta `luma` de tu tarjeta SD