Guide_Wii/_pages/ko_KR/priiloader.md

title
Priiloader

{% include toc title="목차" %}

Priiloader adds a level of brick protection to your Wii. It loads before the Wii Menu does (hence the name). The tool can also enable hacks for your Wii Menu, and be used to quickly launch the Homebrew Channel, BootMii, or whatever homebrew you want!

Additionally, it can be used to quickly launch any Title or Homebrew, or change the way Wii autoboots.

For more information about Priiloader and its options, you can see the Priiloader Usage page. {: .notice--info}

필요한 것

• SD 카드 및 USB 드라이브
• Download the UNEO Channel Booter for Priiloader.
• https://oscwii.org/library/app/loadpriiloader

Optional Requirements for vWii (highly recommended)

• 일반적으로 허용되지 않는 저장 파일을 데이터 관리에서 SD 카드로 복사할 수 있습니다.
• Download the USB Loader GX forwarder WAD (Wii, vWii).
  • Your Wii should now automatically boot to whichever homebrew app you installed.

진행 방법

{% capture notice-vwii-priiloader %}

If you are using a vWii:

• Installing a theme after installing Priiloader will brick your vWii.
• Priiloader 0.10.0 introduces vWii support!

{% endcapture %}

{{ notice-vwii-priiloader }}

Section I - Prep Work

1. 콘솔의 전원을 꺼 주세요.
2. Extract both apps to the root of your SD card or USB drive.
3. Extract the UNEO Channel Booter for Priiloader.zip file anywhere.
4. Copy uneoboot.dol to the root of your SD card.
5. 메모리 카드 슬롯 B에 있는 디버깅 장치로 Wii 메뉴 로그를 전송합니다.
6. Reinsert your SD card or USB drive into your console.

섹션 II - Priiloader 설치하기

1. 콘솔의 전원을 켜 주세요.

2. Launch the Homebrew Channel, and launch the Load Priiloader app.

3. Priiloader 설치 프로그램을 실행합니다.

4. Press the + Button on Wii Remote or the A Button on a GameCube controller.

   

   

5. Press A to return to the Homebrew Channel.

Section III - Entering Priiloader

1. Press the HOME button, then select Exit to System Menu to exit the Homebrew Channel.

2. Your device will have loaded the Priiloader menu.

   

Later on, to enter it you can:

• Holding RESET on a Wii while turning it on.
  • Wii Only
• Holding the ESC key on a USB keyboard while turning on the console.
  • Wii, vWii and Mini
• Run the "Load Priiloader" tool from the HBC
  • Wii, vWii and Mini
• Wii에서 홈브류 채널을 실행합니다.
  • vWii Only

Priiloader 구성

1. Scroll down to System Menu Hacks and press A.

   

   If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time.
   This causes Priiloader to fail to find the hacks_hash.ini file. {: .notice--warning}

2. Scroll down to Settings and press A.

   • Block Online Updates
   • If you are NOT using a CRT display: Remove Deflicker

3. For the following options, enable the options according to your console:

   • Wii:
     • 480p graphics fix in system menu
     • Block Disc Updates
   • Wii mini:
     • Block Disc Updates

4. Scroll down to save settings and press A.

5. Press B to return to the main menu.

Wii mini: Next Steps

Continue to the Dos and Don'ts of Wii Modding
These are some guidelines to ensure you don't brick your Wii. {: .notice--info}

Wii: Next Steps

If you have made it to this point, congrats! You are finished with the required section of the main guide! You can continue if you want to learn more, but anything past this point is optional. {: .notice--success}

Continue to cIOS
This guide provides steps on how to get a basic set of cIOS installed on your Wii, enabling functionality on apps like USB loaders. {: .notice--info}

Allows the Wii Menu to launch discs (this is only the Wii Backup Disc) that use IOS16. {: .notice--info}