Guide_Wii/_pages/fr_FR/wilbrand.md

title
Wilbrand

{% include toc title="Table of Contents" %}

Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the Wii Message Board.

Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0. {: .notice--info}

There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use. {: .notice--info}

Wilbrand Web (Recommended)

Prérequis

• An SD card formatted to FAT32/MS-DOS
• A Wii on at least version 3.0

SD cards larger than 2GB will not work on Wii menu versions before 4.0. {: .notice--warning}

Instructions

1. Allumez votre console.

2. On your Wii, go to Wii Settings, and make note of the version at the top right.

3. Take note of the letter next to the system version, in the top-right corner of the screen.

   • Cette lettre est la région du menu système, que vous devrez connaître pour les étapes qui en ont besoin.

   

4. Proceed to Internet -> Console Information and also make note of your MAC address.

5. Prenez note de votre adresse MAC COMPLET.

   

6. On your computer, open the browser and go to wilbrand.donut.eu.org.

7. Wilbrand in its natural habitat

8. Visit wilbrand.donut.eu.org, input your Wii MAC, version, region, ensure Bundle the HackMii Installer for me! is checked, and cut either wire.

9. Cliquez sur un des deux boutons.

   

10. Click on "Download your .zip".

11. Insert your SD card into your PC.

12. Copy the private folder and the boot.elf file from the downloaded .zip file to the root of your SD card.

13. Take out your SD card and insert it in your Wii.

    • La carte SD doit être insérée dans le port carte SD située devant la Wii. Using a USB adapter plugged into the Wii's USB port will not work.

14. On your Wii, return to the Wii Menu and then open the Wii Message Board.

15. running Wilbrand on Linux

16. Load the green letter with the Bob-omb icon.

    • Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
    • In some cases, you may need to check the messages for tomorrow or yesterday for the letter to show up.
    • If you don't see the green letter, check if any errors appear in the SD card sections in Data Management. If any do, there may be an issue with the SD card format or the Wii's SD card reader.

    

17. Si l'exploit a réussi, votre console aura chargé l'installeur HackMii.

    • If this didn't work for you, try another exploit or try Wilbrand CLI.

Continuer vers la chaîne Homebrew et l'installation de BootMii {: .notice--info}

Wilbrand CLI

Prérequis

• A PC running Windows, MacOS or Linux
• An SD card formatted to FAT32/MS-DOS
• A Wii on version 3.0 or newer
• Wilbrand
• HackMii Installer v1.2

SD cards larger than 2GB will not work on Wii menu versions before 4.0. {: .notice--warning}

Instructions

1. Allumez votre console.

2. On your Wii, go to Wii Settings, and make note of the version at the top right.

3. Take note of the letter next to the system version, in the top-right corner of the screen.

   • Cette lettre est la région du menu système, que vous devrez connaître pour les étapes qui en ont besoin.

   

4. Proceed to Internet -> Console Information and also make note of your MAC address.

5. Prenez note de votre adresse MAC COMPLET.

   

6. Extract the Wilbrand zip to a folder on your PC, preferably on your desktop.

7. Extract the contents of the downloaded ZIP to the root of your SD card.

8. Open a terminal inside the folder Wilbrand was extracted to.

9. Using your Wii's version and MAC address, run the following command:

   • Windows: .\Wilbrand.exe AA-BB-CC-DD-EE-FF MM/DD/YYYY VERSION X:

     • X: is the drive letter of your SD card.

     

   • Linux/MacOS: ./Wilbrand AA-BB-CC-DD-EE-FF MM/DD/YYYY VERSION /media/mount_dir

     • If you have not opened your terminal directly in the folder Wilbrand was extracted to, use cd to enter it first, eg. cd ~/Desktop/Wilbrand
     • /media/mount_dir is the folder your SD card is mounted in. This may vary depending on your Linux distro.

     

10. Extract the HackMii Installer v1.2 to a folder on your PC.

11. Locate the boot.elf file, and put it on the root of your SD card.

12. Take out your SD card and insert it in your Wii.

    • La carte SD doit être insérée dans le port carte SD située devant la Wii. Using a USB adapter plugged into the Wii's USB port will not work.

13. On your Wii, return to the Wii Menu and then open the Wii Message Board.

14. running Wilbrand on Windows

15. Load the green letter with the Bob-omb icon.

    • Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
    • In various scenarios, you may need to look at the previous or next day to find it.
    • If you don't see the green letter, check if any errors appear in the SD card sections in Data Management. If any do, there may be an issue with the SD card format or the Wii's SD card reader.

    

16. Si l'exploit a réussi, votre console aura chargé l'installeur HackMii.

Continuer vers la chaîne Homebrew et l'installation de BootMii {: .notice--info}