* Allow textures to have their data partially mapped
* Explicitly check for invalid memory ranges on the MultiRangeList
* Update GetWritableRegion to also support unmapped ranges
This fixes an issue where the render scale array would not be updated when technically the scales on the flat array were the same, but the start index for the vertex scales was different.
* Add support for BC1/2/3 decompression (for 3D textures)
* Optimize and clean up
* Unsafe not needed here
* Fix alpha value interpolation when a0 <= a1
This fixes some regressions caused by #2971 which caused rendered 3D texture data to be lost for most slices. Fixes issues with Xenoblade 2's colour grading, probably a ton of other games.
This also removes the check from TextureCache, making it the tiniest bit smaller (any win is a win here).
* Initial test for texture sync
* WIP new texture flushing setup
* Improve rules for incompatible overlaps
Fixes a lot of issues with Unreal Engine games. Still a few minor issues (some caused by dma fast path?) Needs docs and cleanup.
* Cleanup, improvements
Improve rules for fast DMA
* Small tweak to group together flushes of overlapping handles.
* Fixes, flush overlapping texture data for ASTC and BC4/5 compressed textures.
Fixes the new Life is Strange game.
* Flush overlaps before init data, fix 3d texture size/overlap stuff
* Fix 3D Textures, faster single layer flush
Note: nosy people can no longer merge this with Vulkan. (unless they are nosy enough to implement the new backend methods)
* Remove unused method
* Minor cleanup
* More cleanup
* Use the More Fun and Hopefully No Driver Bugs method for getting compressed tex too
This one's for metro
* Address feedback, ASTC+ETC to FormatClass
* Change offset to use Span slice rather than IntPtr Add
* Fix this too
* Add support for render scale to vertex stage.
Occasionally games read off textureSize on the vertex stage to inform the fragment shader what size a texture is without querying in there. Scales were not present in the vertex shader to correct the sizes, so games were providing the raw upscaled texture size to the fragment shader, which was incorrect.
One downside is that the fragment and vertex support buffer description must be identical, so the full size scales array must be defined when used. I don't think this will have an impact though. Another is that the fragment texture count must be updated when vertex shader textures are used. I'd like to correct this so that the update is folded into the update for the scales.
Also cleans up a bunch of things, like it making no sense to call CommitRenderScale for each stage.
Fixes render scale causing a weird offset bloom in Super Mario Party and Clubhouse Games. Clubhouse Games still has a pixelated look in a number of its games due to something else it does in the shader.
* Split out support buffer update, lazy updates.
* Commit support buffer before compute dispatch
* Remove unnecessary qualifier.
* Address Feedback
Rather than calculating this for every sampler, this PR calculates if a texture can force anisotropy when its info is set, and exposes the value via a public boolean.
This should help texture/sampler heavy games when anisotropic filtering is not Auto, like UE4 ones (or so i hear?). There is another cost where samplers are created twice when anisotropic filtering is enabled, but I'm not sure how relevant this one is.
* Limit Custom Anisotropic Filtering to only fully mipmapped textures
There's a major flaw with the anisotropic filtering setting that causes @GamerzHell9137 to report graphical bugs that otherwise wouldn't be there, because he just won't set it to Auto. This should fix those issues, hopefully.
These bugs are generally because anisotropic filtering is enabled on something that it shouldn't be, such as a post process filter or some data texture. This PR maintains two host samplers when custom AF is enabled, and only uses the forced AF one when the texture is 2d and fully mipmapped (goes down to 1x1). This is because game textures are the ideal target for this filtering, and they are typically fully mipmapped, unlike things like screen render targets which usually have 1 or just a few levels.
This also only enables AF on mipmapped samplers where the filtering is bilinear or trilinear. This should be self explanatory.
This PR also allows the changing of Anisotropic Filtering at runtime, and you can immediately see the changes. All samplers are flushed from the cache if the setting changes, causing them to be recreated with the new custom AF value. This brings it in line with our resolution scale. 😌
* Expected minimum mip count for large textures rather than all, address feedback
* Use Target rather than Info.Target
* Retrigger build?
* Fix rebase
* Implement DrawTexture functionality
* Non-NVIDIA support
* Disable some features that should not affect draw texture (slow path)
* Remove space from shader source
* Match 2D engine names
* Fix resolution scale and add missing XML docs
* Disable transform feedback for draw texture fallback
* Replace CacheResourceWrite with more general "precise" write
The goal of CacheResourceWrite was to notify GPU resources when they were modified directly, by looking up the modified address/size in a structure and calling a method on each resource. The downside of this is that each resource cache has to be queried individually, they all have to implement their own way to do this, and it can only signal to resources using the same PhysicalMemory instance.
This PR adds the ability to signal a write as "precise" on the tracking, which signals a special handler (if present) which can be used to avoid unnecessary flush actions, or maybe even more. For buffers, precise writes specifically do not flush, and instead punch a hole in the modified range list to indicate that the data on GPU has been replaced.
The downside is that precise actions must ignore the page protection bits and always signal - as they need to notify the target resource to ignore the sequence number optimization.
I had to reintroduce the sequence number increment after I2M, as removing it was causing issues in rabbids kingdom battle. However - all resources modified by I2M are notified directly to lower their sequence number, so the problem is likely that another unrelated resource is not being properly updated. Thankfully, doing this does not affect performance in the games I tested.
This should fix regressions from #2624. Test any games that were broken by that. (RF4, rabbids kingdom battle)
I've also added a sequence number increment to ThreedClass.IncrementSyncpoint, as it seems to fix buffer corruption in OpenGL homebrew. (this was a regression from removing sequence number increment from constant buffer update - another unrelated resource thing)
* Add tests.
* Add XML docs for GpuRegionHandle
* Skip UpdateProtection if only precise actions were called
This allows precise actions to skip reprotection costs.
When a texture is deleted by falling to the bottom of the AutoDeleteCache, its data is flushed to preserve any GPU writes that occurred. This ensures that the data appears in any textures recreated in the future, but didn't account for a texture that already existed with a copy dependency.
This change forces copy dependencies to complete if a texture falls out from from the AutoDeleteCache. (not removed via overlap, as that would be wasted effort)
Fixes broken lighting caused by pausing in SMO's Metro Kingdom. May fix some other issues.
* Fast path for Inline2Memory buffer write
This PR adds a method to PhysicalMemory that attempts to write all cached resources directly, so that memory tracking can be avoided. The goal of this is both to avoid flushing buffer data, and to avoid raising the sequence number when data is written, which causes buffer and texture handles to be re-checked.
This currently only targets buffers, with a side check on textures that falls back to a tracked write if any exist within the target range. It's not expected to write textures from here - this is just a mechanism to protect us if someone does decide to do that. It's possible to add a fast path for this in future (and for ShaderCache, once that starts using tracking)
The forced read before inline2memory begins has been skipped, as the data is fully written when the transfer is completed anyways. This allows us to flush on read in emergency situations, but still write the new data over the flushed data.
Improves performance on Xenoblade 2 and DE, which was flushing buffer data on the GPU thread when trying to write compute data. May improve performance in other games that write SSBOs from compute, and update data in the same/nearby pages often.
Super Smash Bros Ultimate should probably be tested to make sure the vertex explosions haven't returned, as I think that's what this AdvanceSequence was for.
* ForceDirty before write, to make sure data does not flush over the new write
* Lift textures in the AutoDeleteCache for all modifications.
Before, this would only apply to render targets and texture blit. Now it applies to image stores, the fast dma copy path and any other type of modification.
Image store always at least has one reference in the texture pool, so the function of the AutoDeleteCache keeping textures _alive_ is not useful, but a very important function for a while has been its use to flush textures in order of modification when they are dereferenced, so that their data is not lost.
Before, textures populated using image stores were being dereferenced and reloaded as garbage. Now, when these textures are dereferenced, their data will be put back into memory, and everything stays intact.
Fixes lighting breaking when switching levels in THPS1+2, and potentially some more UE4 games. I've tested a bunch more games for regressions and performance impact, but they all seem fine.
* Lift copy srcTexture so that it doesn't remain referenceless
* Perform lift before reference count change on unbind.
It's important to lift on unbind as that is the moment the texture was truly last modified, but definitely not after releasing every single reference.
* Fix TXQ for 3D textures.
Assumes the texture is 3D if the component mask contains Z.
This fixes a bug in UE4 games where parts of the map had garbage pointers to lighting voxels, as the lookup 3D texture was not being initialized. Most notable game is THPS1+2.
May need another PR to keep image store data alive and properly flush it in order using the AutoDeleteCache.
* Get sampler type for TextureSize from bound textures.
* Avoid deleting textures when their data does not overlap.
It's possible that while two textures start and end addresses indicate an overlap, that the actual data contained within them is sparse due to a layer stride. One such possibility is array slices of a cubemap at different mip levels - they overlap on a whole, but the actual texture data fills the gaps between each other's layers rather than actually overlapping.
This fixes issues with UE4 games having incorrect lighting (solid white screen or really dark shadows). There are still remaining issues with games that use the 3D texture prebaked lighting, such as THPS1+2.
This PR also fixes a bug with TexturePool's resized texture handling where the base level in the descriptor was not considered.
* AllRegions granularity for 3d textures is now by level rather than by slice.
* Address feedback
* Only reupload the texture scale array if it changes.
Before, this would be called all the time if any shader needed a scale value. The cost of doing this has increased with threaded-gal, as the scale array is copied to a span pool, and it's was called on pretty much every draw sometimes.
This improves GPU performance in games, scaled or not. Most affected game seems to be Xenoblade Chronicles: Definitive Edition.
* Just use = instead of |=
This greatly reduces memory usage in games that aggressively reuse memory without removing dead textures from the pool, such as the Xenoblade games, UE3 games, and to a lesser extent, UE4/unity games.
This change stops memory usage from ballooning in xenoblade and some other games. It will also reduce texture view/dependency complexity in some games - for example in MK8D it will reduce the number of surface copies between lighting cubemaps generated for actors.
There shouldn't be any performance impact from doing this, though the deletion and creation of textures could be improved by improving the OpenGL texture storage cache, which is very simple and limited right now. This will be improved in future.
Another potential error has been fixed with the texture cache, which could prevent data loss when data is interchangably written to textures from both the GPU and CPU. It was possible that the dirty flag for a texture would be consumed without the data being synchronized on next use, due to the old overlap check. This check no longer consumes the dirty flag.
Please test a bunch of games to make sure they still work, and there are no performance regressions.
Got this the wrong way round - was causing games to try synchronize mipmap levels of like 52 on a 3d texture with 6 levels. Also, corrected the variable name in the method that _was_ working.
* Use "Undesired" scale mode for certain textures rather than blacklisting
* Nit
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Return mapped buffer pointer directly for flush, WriteableRegion for textures
A few changes here to generally improve performance, even for platforms not using the persistent buffer flush.
- Texture and buffer flush now return a ReadOnlySpan<byte>. It's guaranteed that this span is pinned in memory, but it will be overwritten on the next flush from that thread, so it is expected that the data is used before calling again.
- As a result, persistent mappings no longer copy to a new array - rather the persistent map is returned directly as a Span<>. A similar host array is used for the glGet flushes instead of allocating new arrays each time.
- Texture flushes now do their layout conversion into a WriteableRegion when the texture is not MultiRange, which allows the flush to happen directly into guest memory rather than into a temporary span, then copied over. This avoids another copy when doing layout conversion.
Overall, this saves 1 data copy for buffer flush, 1 copy for linear textures with matching source/target stride, and 2 copies for block textures or linear textures with mismatching strides.
* Fix tests
* Fix array pointer for Mesa/Intel path
* Address some feedback
* Update method for getting array pointer.
* 3D engine now uses DeviceState too, plus new state modification tracking
* Remove old methods code
* Remove GpuState and friends
* Optimize DeviceState, force inline some functions
* This change was not supposed to go in
* Proper channel initialization
* Optimize state read/write methods even more
* Fix debug build
* Do not dirty state if the write is redundant
* The YControl register should dirty either the viewport or front face state too, to update the host origin
* Avoid redundant vertex buffer updates
* Move state and get rid of the Ryujinx.Graphics.Gpu.State namespace
* Comments and nits
* Fix rebase
* PR feedback
* Move changed = false to improve codegen
* PR feedback
* Carry RyuJIT a bit more
* Use DeviceState for compute and i2m
* Migrate 2D class, more comments
* Migrate DMA copy engine
* Remove now unused code
* Replace GpuState by GpuAccessorState on GpuAcessor, since compute no longer has a GpuState
* More comments
* Add logging (disabled)
* Add back i2m on 3D engine
* Honour copy dependencies when switching render target
When switching from one render target to another, when both have a copy dependency to each other, a copy can be deferred on the second target when unbinding the first.
Before, this would not be honoured before binding the new texture, so the copy would stay deferred until the render targets change again, at which point it would copy in old data and essentially clear all the draws done during that time.
This change runs synchronize memory to make sure that copies are honoured. This can cause a redundant copy, but it's better than it breaking for now.
This should fix miiedit on AMD/Intel GPUs on windows. May fix other games, or perhaps rare copy dependency bugs on NVIDIA too.
* Address feedback
* Make GPU memory manager a member of GPU channel
* Move physical memory instance to the memory manager, and the caches to the physical memory
* PR feedback
* Ground work for separate GPU channels
* Rename TextureManager to TextureCache
* Decouple texture bindings management from the texture cache
* Rename BufferManager to BufferCache
* Decouple buffer bindings management from the buffer cache
* More comments and proper disposal
* PR feedback
* Force host state update on channel switch
* Typo
* PR feedback
* Missing using
Before this, all samplers instance were leaking on exit because the
dispose method was never getting called.
This fix this issue by making TextureBindingsManager disposable and
calling the dispose method in the TextureManager.
* Refactoring of KMemoryManager class
* Replace some trivial uses of DRAM address with VA
* Get rid of GetDramAddressFromVa
* Abstracting more operations on derived page table class
* Run auto-format on KPageTableBase
* Managed to make TryConvertVaToPa private, few uses remains now
* Implement guest physical pages ref counting, remove manual freeing
* Make DoMmuOperation private and call new abstract methods only from the base class
* Pass pages count rather than size on Map/UnmapMemory
* Change memory managers to take host pointers
* Fix a guest memory leak and simplify KPageTable
* Expose new methods for host range query and mapping
* Some refactoring of MapPagesFromClientProcess to allow proper page ref counting and mapping without KPageLists
* Remove more uses of AddVaRangeToPageList, now only one remains (shared memory page checking)
* Add a SharedMemoryStorage class, will be useful for host mapping
* Sayonara AddVaRangeToPageList, you served us well
* Start to implement host memory mapping (WIP)
* Support memory tracking through host exception handling
* Fix some access violations from HLE service guest memory access and CPU
* Fix memory tracking
* Fix mapping list bugs, including a race and a error adding mapping ranges
* Simple page table for memory tracking
* Simple "volatile" region handle mode
* Update UBOs directly (experimental, rough)
* Fix the overlap check
* Only set non-modified buffers as volatile
* Fix some memory tracking issues
* Fix possible race in MapBufferFromClientProcess (block list updates were not locked)
* Write uniform update to memory immediately, only defer the buffer set.
* Fix some memory tracking issues
* Pass correct pages count on shared memory unmap
* Armeilleure Signal Handler v1 + Unix changes
Unix currently behaves like windows, rather than remapping physical
* Actually check if the host platform is unix
* Fix decommit on linux.
* Implement windows 10 placeholder shared memory, fix a buffer issue.
* Make PTC version something that will never match with master
* Remove testing variable for block count
* Add reference count for memory manager, fix dispose
Can still deadlock with OpenAL
* Add address validation, use page table for mapped check, add docs
Might clean up the page table traversing routines.
* Implement batched mapping/tracking.
* Move documentation, fix tests.
* Cleanup uniform buffer update stuff.
* Remove unnecessary assignment.
* Add unsafe host mapped memory switch
On by default. Would be good to turn this off for untrusted code (homebrew, exefs mods) and give the user the option to turn it on manually, though that requires some UI work.
* Remove C# exception handlers
They have issues due to current .NET limitations, so the meilleure one fully replaces them for now.
* Fix MapPhysicalMemory on the software MemoryManager.
* Null check for GetHostAddress, docs
* Add configuration for setting memory manager mode (not in UI yet)
* Add config to UI
* Fix type mismatch on Unix signal handler code emit
* Fix 6GB DRAM mode.
The size can be greater than `uint.MaxValue` when the DRAM is >4GB.
* Address some feedback.
* More detailed error if backing memory cannot be mapped.
* SetLastError on all OS functions for consistency
* Force pages dirty with UBO update instead of setting them directly.
Seems to be much faster across a few games. Need retesting.
* Rebase, configuration rework, fix mem tracking regression
* Fix race in FreePages
* Set memory managers null after decrementing ref count
* Remove readonly keyword, as this is now modified.
* Use a local variable for the signal handler rather than a register.
* Fix bug with buffer resize, and index/uniform buffer binding.
Should fix flickering in games.
* Add InvalidAccessHandler to MemoryTracking
Doesn't do anything yet
* Call invalid access handler on unmapped read/write.
Same rules as the regular memory manager.
* Make unsafe mapped memory its own MemoryManagerType
* Move FlushUboDirty into UpdateState.
* Buffer dirty cache, rather than ubo cache
Much cleaner, may be reusable for Inline2Memory updates.
* This doesn't return anything anymore.
* Add sigaction remove methods, correct a few function signatures.
* Return empty list of physical regions for size 0.
* Also on AddressSpaceManager
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Compare aligned size for largest mip level when considering sampler resize
When selecting a texture that's a view for a sampler resize, we should take care that resizing it doesn't change the aligned size of any larger mip levels.
This PR covers two cases:
- When creating a view of the texture, we check that the aligned size of the view shifted up to level 0 still matches the aligned size of the container. If it does not, a copy dependency is created rather than resizing.
- When searching for a texture for sampler, textures that do _not_ match our aligned size when both are shifted up by its base level are not considered an exact match, as resizing the found texture will cause the mip 0 aligned size to change. It will create a copy dependency view instead.
Fixes graphical errors and crashes (on flush) in various Unity games that use render-to-texture.
* Move shared code to its own method.
* Pass CbufSlot when getting info from the texture descriptor
Fixes some issues with bindless textures, when CbufSlot is not equal to the current TextureBufferIndex.
Specifically fixes a random chance of full screen colour flickering in Super Mario Party.
* Apply suggestions from code review
Oops
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Improve linear texture compatibility rules
Fixes an issue where small or width-aligned (rather than byte aligned) textures would fail to create a view of existing data. Creates a copy dependency as size change may be risky.
* Minor cleanup
* Remove Size Change for Copy Depenedencies
The copy to the target (potentially different sized) texture can properly deal with cropping by itself.
* Move StrideAlignment and GobAlignment into Constants
* Improve Buffer Textures and flush Image Stores
Fixes a number of issues with buffer textures:
- Reworked Buffer Textures to create their buffers in the TextureManager, then bind them with the BufferManager later.
- Fixes an issue where a buffer texture's buffer could be invalidated after it is bound, but before use.
- Fixed width unpacking for large buffer textures. The width is now 32-bit rather than 16.
- Force buffer textures to be rebound whenever any buffer is created, as using the handle id wasn't reliable, and the cost of binding isn't too high.
Fixes vertex explosions and flickering animations in UE4 games.
* Set ImageStore flag... for ImageStore.
* Check the offset and size.
* Improve handling for unmapped GPU resources
- Fixed a memory tracking bug that would set protection on empty PTEs
- When a texture's memory is (partially) unmapped, all pool references are forcibly removed and the texture must be rediscovered to draw with it. This will also force the texture discovery to always compare the texture's range for a match.
- RegionHandles now know if they are unmapped, and automatically unset their dirty flag when unmapped.
- Partial texture sync now loads only the region of texture that has been modified. Unmapped memory tracking handles cause dirty flags for a texture group handle to be ignored.
This greatly improves the emulator's stability for newer UE4 games.
* Address feedback, fix MultiRange slice
Fixed an issue where the size of the multi-range slice would be miscalculated.
* Update Ryujinx.Memory/Range/MultiRange.cs (feedback)
Co-authored-by: Mary <thog@protonmail.com>
Co-authored-by: Mary <thog@protonmail.com>
* Initial implementation (3d tex mips broken)
This works rather well for most games, just need to fix 3d texture mips.
* Cleanup
* Address feedback
* Copy Dependencies and various other fixes
* Fix layer/level offset for copy from view<->view.
* Remove dirty flag from dependency
The dirty flag behaviour is not needed - DeferredCopy is all we need.
* Fix tracking mip slices.
* Propagate granularity (fix astral chain)
* Address Feedback pt 1
* Save slice sizes as part of SizeInfo
* Fix nits
* Fix disposing multiple dependencies causing a crash
This list is obviously modified when removing dependencies, so create a copy of it.
* Support for resources on non-contiguous GPU memory regions
* Implement MultiRange physical addresses, only used with a single range for now
* Actually use non-contiguous ranges
* GetPhysicalRegions fixes
* Documentation and remove Address property from TextureInfo
* Finish implementing GetWritableRegion
* Fix typo
* Implement TreeMap from scratch.
Begin implementation of MemoryBlockManager
* Implement GetFreePosition using MemoryBlocks
* Implementation of Memory Management using a Tree.
Still some issues to work around, but promising thus far.
* Resolved invalid mapping issue.
Performance appears promising.
* Add tick metrics
* Use the logger instead
* Use debug loggin instead of info.
* Remove unnecessary code. Add descriptions of added functions.
* Improve memory allocation even further. As well as improve speed of position fetching.
* Add TreeDictionary to Ryujinx Commons
Removed Unnecessary Usigns
* Add a Performance Profiler + Improve ReserveFixed
* Begin transition to allocation in nvdrv
* Create singleton nvmemallocator
* Moved Allocation into Nv Related Files
As requested by gdkchan, any allocation of memory has been moved into the driver files.
Mapping remains in the GPU MemoryManager.
* Remove unnecessary usings
* Add missing descriptions
* Correct descriptions
* Fix formatting.
* Remove unnecessary whitespace
* Formatting / Convention Updates
* Changes / Fixes
Made syntax and convention changes as requested by gdkchan.
Fixed an issue where IsRegionUsed would return the wrong boolean.
Fixed an issue where GetFreePosition was asked for an address instead of a size.
* Undo commenting of Assert in shader cache
* Update Ryujinx.Common/Collections/TreeDictionary.cs
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Resolved many suggestions
* Implement Improved TreeDictionary
Based off of Pseudo code and custom implementations.
* Rename _set to _dictionary
* Remove unused code
* Remove unused code.
* Remove unnecessary MapLow function.
* Resolve data-structure based issues
* Make adjustments to memory management.
Deactive de-allocation for now, it causes more harm than good.
* Minor refactorings + Re-implement deallocation
Also cleaned up unnecessary code.
* Add Tests for TreeDictionary
* Update data structure to properly balance the tree
* Experimental Implementation:
1. Reduce Time to Next Node to O(1) Runtime
2. Reduce While Loop Ct To 2 (In Most Cases)
* Address issues w/ Deallocating Memory
* Final Build
+ Fully Implement Dictionary Interface for new Data Structure
+ Cover All Memory Allocation Edge Cases, particularly w/ Games that De-Allocate a lot.
* Minor Corrections
Give TreeDictionary its own count (do not depend on inner dictionary)
Properly remove adjacent allocations
* Add AsList
* Fix bug where internal dictionary wasn't being updated w/ new node for overwritten key.
* Address comments in review.
* Fix issue where block wouldn't break out (Fixes UE4 issues)
* Update descriptions
* Update descriptions
* Reduce Node visibility to protect TreeDictionary Integrity + Remove usage of struct.
* Update tests to use new TreeDictionary implementation.
* Remove usage of dictionary in TreeDictionary
* Refactoring / Renaming
* Remove unneeded memoryblock class.
* Add space for while
* Add space for if
* Formatting / descriptions
* Clarified some descriptions
* Reduce visibility of memory allocator
* Edit method names to make more sense as memory blocks are no longer in use.
* Make names consistent.
* Protect against npe when sucessorof is called against keys that don't exist. (Not in use by memory manager, this is for other prs that might use this data structure)
* Possible edge-case resolve
* Update Ryujinx.Common/Collections/TreeDictionary.cs
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Update Ryujinx.HLE/HOS/Services/Nv/NvMemoryAllocator.cs
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Reduce # of unnecessary duplicate variables / Reduce visibility of variables only internally used.
* Rename count to _count
* Update Description of Add method.
* Fix copypasta
* Address comments
* Address comments
* Remove whitespace
* Address comments, condense variables.
* Consolidate vars
* Fix whitespace.
* Nit
* Fix exception msg
* Fix arrayIndex check
* Fix arrayIndex check + indexer
* Remove whitespace from cast
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Allow copy destination to have a different scale from source
Will result in more scaled copy destinations, but allows scaling in some games that copy textures to the output framebuffer.
* Support copying multiple levels/layers
Uses glFramebufferTextureLayer to copy multiple layers, copies levels individually (and scales the regions).
Remove CopyArrayScaled, since the backend copy handles it now.
* shader cache: Fix invalid virtual address clean up
This fix an issue causing the virtual address of texture descriptors to
not be cleaned up when caching and instead cleaning texture format and swizzle.
This should fix duplicate high duplication in the cache for certain
games and possible texture corruption issues.
**THIS WILL INVALIDATE ALL SHADER CACHE LEVELS CONSIDERING THE NATURE OF THE ISSUE**
* shader cache: Address gdk's comment
Here come Salieri, my implementation of a disk shader cache!
"I'm sure you know why I named it that."
"It doesn't really mean anything."
This implementation collects shaders at runtime and cache them to be later compiled when starting a game.
* Size hints for copy regions and viewport dimensions to avoid data loss
* Reword comment.
* Use info for the rule rather than calculating aligned size.
* Reorder min/max, remove spaces
* WIP Range Tracking
- Texture invalidation seems to have large problems
- Buffer/Pool invalidation may have problems
- Mirror memory tracking puts an additional `add` in compiled code, we likely just want to make HLE access slower if this is the final solution.
- Native project is in the messiest possible location.
- [HACK] JIT memory access always uses native "fast" path
- [HACK] Trying some things with texture invalidation and views.
It works :)
Still a few hacks, messy things, slow things
More work in progress stuff (also move to memory project)
Quite a bit faster now.
- Unmapping GPU VA and CPU VA will now correctly update write tracking regions, and invalidate textures for the former.
- The Virtual range list is now non-overlapping like the physical one.
- Fixed some bugs where regions could leak.
- Introduced a weird bug that I still need to track down (consistent invalid buffer in MK8 ribbon road)
Move some stuff.
I think we'll eventually just put the dll and so for this in a nuget package.
Fix rebase.
[WIP] MultiRegionHandle variable size ranges
- Avoid reprotecting regions that change often (needs some tweaking)
- There's still a bug in buffers, somehow.
- Might want different api for minimum granularity
Fix rebase issue
Commit everything needed for software only tracking.
Remove native components.
Remove more native stuff.
Cleanup
Use a separate window for the background context, update opentk. (fixes linux)
Some experimental changes
Should get things working up to scratch - still need to try some things with flush/modification and res scale.
Include address with the region action.
Initial work to make range tracking work
Still a ton of bugs
Fix some issues with the new stuff.
* Fix texture flush instability
There's still some weird behaviour, but it's much improved without this. (textures with cpu modified data were flushing over it)
* Find the destination texture for Buffer->Texture full copy
Greatly improves performance for nvdec videos (with range tracking)
* Further improve texture tracking
* Disable Memory Tracking for view parents
This is a temporary approach to better match behaviour on master (where invalidations would be soaked up by views, rather than trigger twice)
The assumption is that when views are created to a texture, they will cover all of its data anyways. Of course, this can easily be improved in future.
* Introduce some tracking tests.
WIP
* Complete base tests.
* Add more tests for multiregion, fix existing test.
* Cleanup Part 1
* Remove unnecessary code from memory tracking
* Fix some inconsistencies with 3D texture rule.
* Add dispose tests.
* Use a background thread for the background context.
Rather than setting and unsetting a context as current, doing the work on a dedicated thread with signals seems to be a bit faster.
Also nerf the multithreading test a bit.
* Copy to texture with matching alignment
This extends the copy to work for some videos with unusual size, such as tutorial videos in SMO. It will only occur if the destination texture already exists at XCount size.
* Track reads for buffer copies. Synchronize new buffers before copying overlaps.
* Remove old texture flushing mechanisms.
Range tracking all the way, baby.
* Wake the background thread when disposing.
Avoids a deadlock when games are closed.
* Address Feedback 1
* Separate TextureCopy instance for background thread
Also `BackgroundContextWorker.InBackground` for a more sensible idenfifier for if we're in a background thread.
* Add missing XML docs.
* Address Feedback
* Maybe I should start drinking coffee.
* Some more feedback.
* Remove flush warning, Refocus window after making background context
* Add swizzle matching rules.
Improves rules which try to match incompatible formats as perfect, such as D32 float -> R32 float.
Remove Format.HasOneComponent, since this information is now available via the FormatInfo struct.
* Fix this rule.
* Update component counts for depth formats.
* Initial implementation. Still pending better valid-overlap handling,
disposed pool, compressed format flush fix.
* Very messy backend resource cache.
* Oops
* Dispose -> Release
* Improve Release/Dispose.
* More rule refinement.
* View compatibility levels as an enum - you can always know if a view is only copy compatible.
* General cleanup.
Use locking on the resource cache, as it is likely to be used by other threads in future.
* Rename resource cache to resource pool.
* Address some of the smaller nits.
* Fix regression with MK8 lens flare
Texture flushes done the old way should trigger memory tracking.
* Use TextureCreateInfo as a key.
It now implements IEquatable and generates a hashcode based on width/height.
* Fix size change for compressed+non-compressed view combos.
Before, this could set either the compressed or non compressed texture with a size with the wrong size, depending on which texture had its size changed. This caused exceptions when flushing the texture.
Now it correctly takes the block size into account, assuming that these textures are only related because a pixel in the non-compressed texture represents a block in the compressed one.
* Implement JD's suggestion for HashCode Combine
Co-authored-by: jduncanator <1518948+jduncanator@users.noreply.github.com>
* Address feedback
* Address feedback.
Co-authored-by: jduncanator <1518948+jduncanator@users.noreply.github.com>
