- configure_input_player_widget.cpp: always better to use `const auto &`
whenever possible
- profiler.cpp: `ev->pos()` is deprecated, replace with
`ev->position()`, which returns floats, thus the addition of
`.toPoint()` (same as what's happening in `pos()`)
- game_list.cpp: `QString::SplitBehavior` is deprecate, use `Qt::`
namespace instead
Some titles, such as homebrew, do not have any version string. Because
yuzu hard codes the title bar string assuming a version string is
preset, booting homebrew causes yuzu to add an extra separator with no
content between.
This uses a lambda expression to prevent that from happening.
Previously, the dialog buttons would be floating in-place when the dialog is stretched downwards.
This change ensures that the dialog buttons always stay at the bottom of the window.
To keep the TAS inputs synced to the game speed even through lag spikes and loading zones, deeper access is required.
First, the `TAS::UpdateThread` has to be executed exactly once per frame. This is done by connecting it to the service method the game calls to pass parameters to the GPU: `Service::VI::QueueBuffer`.
Second, the loading time of new subareas and/or kingdoms (SMO) can vary. To counteract that, the `CPU_BOOST_MODE` can be detected: In the `APM`-interface, the call to enabling/disabling the boost mode can be caught and forwarded to the TASing system, which can pause the script execution if neccessary and enabled in the settings.
During script playback/recording, the user has to see what happens currently. For that, a new label has been added to the bottom-left corner, always displaying the current state of the TASing system.
First of all, TASing requires a script to play back. The user can select the parent directory at `System -> Filesystem`, next to an option to pause TAS during loads: This requires a "hacky" setup deeper in the code and will be added in the last commit.
Also, Hotkeys are being introduced: CTRL+F5 for playback start/stop, CTRL+F6 for re-reading the script and CTRL+F7 for recording a new script.
The base playback system supports up to 8 controllers (specified by `PLAYER_NUMBER` in `tas_input.h`), which all change their inputs simulataneously when `TAS::UpdateThread` is called.
The recording system uses the controller debugger to read the state of the first controller and forwards that data to the TASing system for recording. Currently, this process sadly is not frame-perfect and pixel-accurate.
Co-authored-by: Naii-the-Baf <sfabian200@gmail.com>
Co-authored-by: Narr-the-Reg <juangerman-13@hotmail.com>
Some titles set an exit lock through HLE, which prompts an exit confirmation when stopping emulation if the system is locked.
This change allows bypassing this confirmation if the setting to confirm exits has been disabled by the user.
The log filter was being ignored on initialization due to the logging instance being initialized before the config instance, so the log filter was set to its default value.
This fixes that oversight, along with using descriptive exceptions instead of abort() calls.
If we don't set an explicit source and target language for the base
english translation, then we'll generate an incorrect number of
<numerusform> tags (which Transifex doesn't like).
Some system configurations may see visual regressions or lower performance using GPU decoding compared to CPU decoding. This setting provides the option for users to specify their decoding preference.
Co-Authored-By: yzct12345 <87620833+yzct12345@users.noreply.github.com>
This simplifies the logging system.
This also fixes some lost messages on startup.
The simplification is simple. I removed unused functions and moved most things in the .h to the .cpp. I replaced the unnecessary linked list with its contents laid out as three member variables. Anything that went through the linked list now directly accesses the backends. Generic functions are replaced with those for each specific use case and there aren't many. This change increases coupling but we gain back more KISS and encapsulation.
With those changes it was easy to make it thread-safe. I just removed the mutex and turned a boolean atomic. I was planning to use this thread-safety in my next PR about stacktraces. It was actually async-signal-safety at first but I ended up using a different approach. Anyway getting rid of the linked list is important for that because have the list of backends constantly changing complicates things.
This commit renames the "Services" tab to "Network" and adds a combobox that allows the user to select the network interface that yuzu should use. This new setting is now used to get the local IP address in Network::GetHostIPv4Address. This prevents yuzu from selecting the wrong network interface and thus using the wrong IP address. The return type of Network::GetHostIPv4Adress has also been changed.
OpenGL and Vulkan images render in different coordinate systems. This allows us to specify the coordinate system of the screenshot within each renderer
Use VK_KHR_pipeline_executable_properties when enabled and available to
log statistics about the pipeline cache in a game.
For example, this is on Turing GPUs when generating a pipeline cache
from Super Smash Bros. Ultimate:
Average pipeline statistics
==========================================
Code size: 6433.167
Register count: 32.939
More advanced results could be presented, at the moment it's just an
average of all 3D and compute pipelines.
The screenshot directory path returned does not have a trailing directory separator character. This caused screenshots to be saved in the parent directory of the configured screenshot directory.
This fixes that behavior
This setting is best referred to as a speed limit, as it involves the limits of all timing based aspects of the emulator, not only framerate.
This allows us to differentiate it from the fps unlocker setting.
This change adds two new context menu items to remove either the OpenGL or the Vulkan shader caches individually, and the provides the option to remove all caches for the selected title.
This also changes the behavior of the open shader cache option. Now it creates the shader cache directory for the title if it does not yet exist.
GLASM is getting good enough that we can move it out of advanced
graphics settings. This removes the setting `use_assembly_shaders`,
opting for a enum class `shader_backend`. This comes with the benefits
that it is extensible for additional shader backends besides GLSL and
GLASM, and this will work better with a QComboBox.
Qt removes the related assembly shader setting from the Advanced
Graphics section and places it as a new QComboBox in the API Settings
group. This will replace the Vulkan device selector when OpenGL is
selected.
Additionally, mark all of the custom anisotropic filtering settings as
"WILL BREAK THINGS", as that is the case with a select few games.
Some titles crash if the FPS limit is disabled when launching. This change ensures that titles launch with the limit in-place to avoid issues.
In order to simplify the change, the UI toggle was removed as it will always be overridden at launch to be disabled.
The setting can still be toggled during gameplay with the hotkey, and indicated by the fps label in the status bar.
This is a bug fix. Enabling graphics debug mode, then saving a custom
configuration causes graphics debugging to be saved and read from the
custom configuration.
Isolate it the same way we isolate the CPU settings.
Decouples the CPU debugging mode from the enumeration to its own
boolean. After this, it moves the CPU Debugging tab over to a sub tab
underneath the Debug tab in the configuration UI.
Currently, whether or not the title is 32-bit or 64-bit was being
appended as a suffix to the title, which is fine for left-to-right
languages, but may not always fly so smoothly with some right-to-left
languages.
We also weren't marking that portion of the string as translatable,
which prevents translators from translating part of the title string.
Old CPU Accuracy setting won't translate well into since we're adding
one at the beginning of the list. On first boot with the new setting,
just use the default setting.
The current CPU accuracy settings in yuzu are fairly polarized and
require more than common knowledge to know what the optimal settings for
yuzu would be. This adds a curated option called 'Auto' that applies a
few at the moment known-good unsafe optimizations to Dynarmic.
Slight improvements to readability.
Dropped suggestions for string_view (settings.h:101), pass by value
(settings.h:82), reverting double to a float (config.cpp:316), and other
smaller ones, some out of scope.
Addresses review feedback.
Co-authored-by: Ameer J <52414509+ameerj@users.noreply.github.com>
Creates a new BasicSettings class in common/settings, and forces setting
a default and label for each setting that uses it in common/settings.
Moves defaults and labels from both frontends into common settings.
Creates a helper function in each frontend to facillitate reading the
settings now with the new default and label properties.
Settings::Setting is also now a subclass of Settings::BasicSetting. Also
adds documentation for both Setting and BasicSetting.
There are a lot of scenarios where we don't particularly care whether or not the removal operation and just simply attempt a removal.
As such, removing the [[nodiscard]] attribute is best for these functions.
Use its std::stop_token to abort shader cache loading.
Using std::stop_token instead of std::atomic_bool allows the usage of
other utilities like std::stop_callback.
This introduces a new setting Enable FS Access Log which saves the filesystem access log to sdmc:/FsAccessLog.txt
If this setting is not enabled, this will indicate to FS to not call OutputAccessLogToSdCard.
Fixes softlocks during loading in Xenoblade Chronicles 2 when certain DLC is enabled.
This warns the user if there isn't enough free space to dump the entire RomFS to disk. It requires at least the size of the extracted RomFS + 1 GiB as a buffer of free space.
Correct light theme loading
The setLayout call in game list instantiation will call resizing signals with default values in light theme, which was then being erroneously saved. setLayout doesn't seem to call resizing for any other theme, so I'm not sure why that happens.
Causes a heap-use-after free reported by AddressSanitizer. This makes
use of std::filesystem::path, but due to that we have to use their
string() function which may not work for all characters.
There's no need to check the first and last rows since they'll always be the Favorites and AddDir rows.
Also change the name of the clear_all variable for consistency.
Builds on german77's work to reset all settings back to their defaults.
This include UISettings and Settings values structs, but does not affect
save profiles, input profiles, and game directories.
This works from a button input in configure_general. When activated, it
calls a callback to close the whole configure dialog, then GMainWindow
deletes the old configuration, both on disk and in memory, and
reinitalizes a new one. It also resets a portion of the UI and calls the
telemetry window prompt.
This commit does not compile.
Initial work to add and connect a Reset to Defaults button to the
configure_general tab.
Co-authored-by: german77 <juangerman-13@hotmail.com>
If the local version of Qt is older than the minimum version required by
yuzu, download a pre-built binary package from yuzu-emu/ext-linux-bin
and build yuzu with it, instead.
This also requires linking yuzu to the correct libraries after building
it, and copying over the required binaries when building yuzu.
This sets the Qt requirement to 5.12, which is intentionally behind the
versions used by our toolchains since they are not all updated yet to
5.15.
Currently with programs that have a 0 title id, yuzu loads the custom
configuration 0000000000000000.ini for per-game configs. This is not
ideal since many homebrews share this id. Instead for these programs, we
load a config that is simply the file name and `.ini` appended to it.
* common: fs: fs_types: Create filesystem types
Contains various filesystem types used by the Common::FS library
* common: fs: fs_util: Add std::string to std::u8string conversion utility
* common: fs: path_util: Add utlity functions for paths
Contains various utility functions for getting or manipulating filesystem paths used by the Common::FS library
* common: fs: file: Rewrite the IOFile implementation
* common: fs: Reimplement Common::FS library using std::filesystem
* common: fs: fs_paths: Add fs_paths to replace common_paths
* common: fs: path_util: Add the rest of the path functions
* common: Remove the previous Common::FS implementation
* general: Remove unused fs includes
* string_util: Remove unused function and include
* nvidia_flags: Migrate to the new Common::FS library
* settings: Migrate to the new Common::FS library
* logging: backend: Migrate to the new Common::FS library
* core: Migrate to the new Common::FS library
* perf_stats: Migrate to the new Common::FS library
* reporter: Migrate to the new Common::FS library
* telemetry_session: Migrate to the new Common::FS library
* key_manager: Migrate to the new Common::FS library
* bis_factory: Migrate to the new Common::FS library
* registered_cache: Migrate to the new Common::FS library
* xts_archive: Migrate to the new Common::FS library
* service: acc: Migrate to the new Common::FS library
* applets/profile: Migrate to the new Common::FS library
* applets/web: Migrate to the new Common::FS library
* service: filesystem: Migrate to the new Common::FS library
* loader: Migrate to the new Common::FS library
* gl_shader_disk_cache: Migrate to the new Common::FS library
* nsight_aftermath_tracker: Migrate to the new Common::FS library
* vulkan_library: Migrate to the new Common::FS library
* configure_debug: Migrate to the new Common::FS library
* game_list_worker: Migrate to the new Common::FS library
* config: Migrate to the new Common::FS library
* configure_filesystem: Migrate to the new Common::FS library
* configure_per_game_addons: Migrate to the new Common::FS library
* configure_profile_manager: Migrate to the new Common::FS library
* configure_ui: Migrate to the new Common::FS library
* input_profiles: Migrate to the new Common::FS library
* yuzu_cmd: config: Migrate to the new Common::FS library
* yuzu_cmd: Migrate to the new Common::FS library
* vfs_real: Migrate to the new Common::FS library
* vfs: Migrate to the new Common::FS library
* vfs_libzip: Migrate to the new Common::FS library
* service: bcat: Migrate to the new Common::FS library
* yuzu: main: Migrate to the new Common::FS library
* vfs_real: Delete the contents of an existing file in CreateFile
Current usages of CreateFile expect to delete the contents of an existing file, retain this behavior for now.
* input_profiles: Don't iterate the input profile dir if it does not exist
Silences an error produced in the log if the directory does not exist.
* game_list_worker: Skip parsing file if the returned VfsFile is nullptr
Prevents crashes in GetLoader when the virtual file is nullptr
* common: fs: Validate paths for path length
* service: filesystem: Open the mod load directory as read only
Most of the code already exists to do this, but the Apply button itself
was never added. This adds a button and boolean that tells yuzu to save
the configuration after applying settings, even if close/Cancel is
pressed on the dialog. Changes after applying will not be saved when
Cancel is pressed, though.
Some users have reported rare crashes when pressing the Enter key on the keyboard to confirm input in the normal software keyboard, particularly in Super Smash Bros. Ultimate while entering the name of a ruleset or controller layout.
It is suspected that the QLineEdit::returnPressed signal is causing a race condition as confirming input through other means does not produce the crash. Since Qt::QueuedConnection posts an event to the event queue of the callee's thread instead of executing it directly on the caller's thread, this eliminates any potential race conditions from occurring in this scenario.
Drops an unused variant of ApplyPerGameSetting, and turns the QComboBox
variants of SetPerGameSetting into a template.
Co-authored-by: Ameer J <52414509+ameerj@users.noreply.github.com>
Previously the text string for the inline software keyboard was being sent instead of the normal software keyboard, leading to empty text being sent all the time.
Duplicate labels were unintentionally introduced due to copy-paste. This silences the compilation warning produced by the presence of these duplicates.
Many users have been installing their base titles into NAND instead of adding them into the games list. This prevents users from installing any base titles and warns the user about the action.
Allows setting CPU accuracy to Accurate or Unsafe per-game, as well as
the accuracy options for Unsafe. Debug is not allowed here as a per-game
CPU accuracy.
Originally, every time we add a per-game setting, we'd have to guard for
it when setting it on the global config, and use a specific function to
do it for the per-game config.
This moves the global check into the ApplyPerGameSetting function so
that we can use it for changing both the global and per-game states.
Less work for the programmer.
The FPS counter was based on metrics in the nvdisp swapbuffers call. This metric would be accurate if the gpu thread/renderer were synchronous with the nvdisp service, but that's no longer the case.
This commit moves the frame counting responsibility onto the concrete renderers after their frame draw calls. Resulting in more meaningful metrics.
The displayed FPS is now made up of the average framerate between the previous and most recent update, in order to avoid distracting FPS counter updates when framerate is oscillating between close values.
The status bar update frequency was also changed from 2 seconds to 500ms.
The URL string was being deleted before being used, leading to a use-after-free occurring when it is used afterwards.
Fix this by taking the string by const ref to extend its lifetime, ensuring it doesn't get deleted before use.
The Qt Software Keyboard frontend attempts to mimic the software keyboard rendered by the Nintendo Switch.
This frontend implements multiple keyboard types, such as the normal software keyboard, the numeric pad software keyboard and the inline software keyboard.
Keyboard and controller input is also supported in this frontend.
Keyboard input is handled as native keyboard input, and so the on-screen keyboard cannot be navigated with the keyboard arrow keys as the arrow keys are used to move the text cursor.
Controller input is translated into mouse hover movements on the onscreen keyboard or their respective button actions (B for backspace, A for entering the selected button, L/R for moving the text cursor, etc).
The text check dialogs can also be confirmed with controller input through the use of the OverlayDialog
Massive thanks to Rei for creating all the UI for the various keyboards and OverlayDialog. This would not have been possible without his excellent work.
Co-authored-by: Its-Rei <kupfel@gmail.com>
An OverlayDialog is an interactive dialog that accepts controller input (while a game is running)
This dialog attempts to replicate the look and feel of the Nintendo Switch's overlay dialogs and
provide some extra features such as embedding HTML/Rich Text content in a QTextBrowser.
The OverlayDialog provides 2 modes: one to embed regular text into a QLabel and another to embed
HTML/Rich Text content into a QTextBrowser.
Co-authored-by: Its-Rei <kupfel@gmail.com>
Moves the existing meta type registration into its own function and adds registration of common integral, floating point and string types.
This function is also now called in the constructor of the GMainWindow instead of on starting a game.
- This is a developer-only setting and no longer needs to be enabled by default.
- Also adds "use_auto_stub" setting to SDL frontend while we are here.
- Supersedes #1340.
Several issues have been reported with the borderless windowed fullscreen mode on *nix platforms. Default to exclusive fullscreen mode on these platforms for now.
The borderless windowed fullscreen mode solves several issues with the presentation of the overlay dialogs and on-screen keyboard in exclusive fullscreen mode, and also has other benefits such as smoother gameplay, lower latency and a significant reduction in screen tearing.
Co-authored-by: Its-Rei <kupfel@gmail.com>
Address Sanitizer reports stack-use-after-scope on line 231
`vulkan_devices.push_back(QString::fromStdString(name));`. Instead of
using a pointer, copy the string into a std::string and use that,
instead.
Auto-stub is an experimental debugging feature that may cause unforseen bugs. This adds a toggle to only allow auto-stubbing unimplemented functions when explicitly enabled when yuzu is launched.
Adds the access key to the Controller P1 selection at View -> Debugger
-> Controller P1. Avoids using the windowTitle as that would add a
literal & to the beginning of the window title.
Due to BindBufferRangeNV limitations and poor quality code emission from
our side, assembly shaders are currently slower than GLSL. Their build
time and feature advantages are still relevant, but they are outweighted
by their runtime performance.
Instead of using a two step initialization to report errors, initialize
the GPU renderer and rasterizer on the constructor and report errors
through std::runtime_error.
Setting __GL_SHADER_DISK_CACHE_PATH we can force the cache directory to
be in yuzu's user directory to stop commonly distributed malware from
deleting our driver shader cache. And by setting
__GL_SHADER_DISK_CACHE_SKIP_CLEANUP we can have an unbounded shader
cache size.
This has only been implemented on Windows, mostly because previous tests
didn't seem to work on Linux.
Disable the precompiled cache on Nvidia's driver. There's no need to
hide information the driver already has in its own cache.
The bug(s) happened because we swapped the contents on values.game_dirs, but the pointer each item had to their respective game_dir wasn't updated. This made it so that the item had the wrong game_dir associated with it after a "move up" or "move down" operation. It can be observed by choosing "open directory location" after such operation.
Changed from raw pointer to an index because it's equivalent but a bit clearer, but the change is not essential.
Co-Authored-By: Vitor K <29167336+vitor-k@users.noreply.github.com>
The function is unused if YUZU_ENABLE_BOXCAT is disabled, causing a
-Wunused-funciton error when compiled.
Wrapping it with `#ifdef YUZU_ENABLE_BOXCAT` to prevent compiling the
function when the variable is disabled. Opting to not use [[maybe
unused]] in case the function is totally unused in the future.
QRegularExpression was introduced in Qt 5 as a better replacement for
QRegExp. In Qt 6.0 QRegExp is removed entirely.
To remain forward compatible with Qt 6.0, we can transition over to
using QRegularExpression.
setMargin() has been deprecated since Qt 5, and replaced with
setContentsMargins(). We can move over to setContentsMargins() to stay
forward-compatible with Qt 6.0.
This tab of the settings is already extremely bloated and the setting itself is quite useless.
With a gamelist of almost 30 games, the cache directory is smaller than 1MB for me and therefore I don't see why it needs to be configurable.
During the transition to make the error dialog translatable, I
accidentally got rid of the conversion to ResultStatus, which prevented
operator<< from being invoked during formatting.
This adds a function to directly retrieve the result status string
instead so that it displays again.
Increases the controller connection delay to 60ms and refactors it to attempt to disconnect all controllers prior to connecting all controllers in HID.
The following command line arguments are supported:
yuzu.exe "path_to_game" - Launches a game at "path_to_game"
yuzu.exe -f - Launches the next game in fullscreen
yuzu.exe -g "path_to_game" - Launches a game at "path_to_game"
yuzu.exe -f -g "path_to_game" - Launches a game at "path_to_game" in fullscreen
Saves UISettings and Settings when booting a guest. Moves updating
UISettings::values from GMainWindow::closeEvent into its own function,
then reuses it in GMainWindow::BootGame.
Since this is inside a string literal, backslashes that are part of
regex syntax have to be escaped. But that's ugly, so convert to a raw
string instead.
yuzu's web applet does not or barely reacts to user input while open in
Linux. It can be closed via 'Exit Web Applet' on the menubar, however if
yuzu is in fullscreen, this is effectively a softlock as the menubar
cannot be accessed.
This disables building yuzu with the web applet on the Linux CI target.
In addition, this disables the QMessageBox warning about not having
compiled yuzu with the web applet.
Removes all remaining usages of the global system instance. After this,
migration can begin to migrate to being constructed and managed entirely
by the various frontends.
EmuWindow::PollEvents was called from the GPU thread (or the CPU thread
in sync-GPU mode) when swapping buffers. It had three implementations:
- In GRenderWindow, it didn't actually poll events, just set a flag and
emit a signal to indicate that a frame was displayed.
- In EmuWindow_SDL2_Hide, it did nothing.
- In EmuWindow_SDL2, it did call SDL_PollEvents, but this is wrong
because SDL_PollEvents is supposed to be called on the thread that set
up video - in this case, the main thread, which was sleeping in a
busyloop (regardless of whether sync-GPU was enabled). On macOS this
causes a crash.
To fix this:
- Rename EmuWindow::PollEvents to OnFrameDisplayed, and give it a
default implementation that does nothing.
- In EmuWindow_SDL2, do not override OnFrameDisplayed, but instead have
the main thread call SDL_WaitEvent in a loop.
Not all controllers have a SDL_GameController binding. This caused controllers not present in the SDL GameController database to have buttons mapped instead of axes.
Furthermore, it was not possible to invert the axes when it could be useful such as emulating a horizontal single joycon or other potential cases. This allows us to invert the axes by reversing the order of mapping (vertical, then horizontal).
Some games do not respond to a change in controller type if 1) The controller is not disconnected prior to being reconnected and/or 2) The controller is reconnected instantly after being disconnected.
Since it is not possible to change controllers instantly on hardware and requiring a disconnect prior to connecting a new one, we should emulate this as well with a small delay, fixing the aforementioned issue.
A vibration device is an input device that returns an unsigned byte as status.
It represents whether the vibration device supports vibration or not.
If the status returns 1, it supports vibration. Otherwise, it does not support vibration.
Allows for enabling and modifying vibration and vibration strength per player.
Also adds a toggle for enabling/disabling accurate vibrations.
Co-authored-by: Its-Rei <kupfel@gmail.com>
This allows setting the vibration strength percentage anywhere from 1% to 100%.
Also hooks up the remaining motion button and checkbox in the Controller Applet.
RestoreDefaults() now restores the selected devices' mappings using UpdateMappingWithDefaults().
This allows us to move the keyboard mapping from RestoreDefaults() to UpdateMappingWithDefaults().
Previously mouse clicks will not register when touch is disabled.
This rectifies that and allows mouse clicks to be mapped to other buttons if the touchscreen is disabled.
With this, the "Input Devices" combobox should accurately reflect the input device being used and disallows inputs from other input devices unless the input device is set to "Any".
Changes QMessageBox usages to warnings, as the problems they bring to
light are being safely handled by the application and do not warrant
something of the "critical" level.
Changes LOG_CRITICAL to LOG_ERROR for the same reason. Preferring ERROR
to WARNING as yuzu is denying loading of any guest applications after
checking for these conditions.
Moved logging the GL_RENDERER string into GetUnsupportedGLExtensions()
to make more clear that unsupported extensions were already being
logged. Makes placement of the logs easier to understand later, as well.
Changes the first message to not include the OpenGL version, as the
error is caused by OpenGL failing to load.
Adds a new check for OpenGL version 4.3. This will display a message
with a similar error as well as the GL_RENDERER string. Adds a CRITICAL
log message when triggered. This prevents a crash with yuzu trying to
use older OpenGL versions.
Modifies the unsupported extension message to output the GL_RENDERER
string in the message, as well as logging the string.
Unicorn long-since lost most of its use, due to dynarmic gaining support
for handling most instructions. At this point any further issues
encountered should be used to make dynarmic better.
This also allows us to remove our dependency on Python.
This commit aims to implement the NVDEC (Nvidia Decoder) functionality, with video frame decoding being handled by the FFmpeg library.
The process begins with Ioctl commands being sent to the NVDEC and VIC (Video Image Composer) emulated devices. These allocate the necessary GPU buffers for the frame data, along with providing information on the incoming video data. A Submit command then signals the GPU to process and decode the frame data.
To decode the frame, the respective codec's header must be manually composed from the information provided by NVDEC, then sent with the raw frame data to the ffmpeg library.
Currently, H264 and VP9 are supported, with VP9 having some minor artifacting issues related mainly to the reference frame composition in its uncompressed header.
Async GPU is not properly implemented at the moment.
Co-Authored-By: David <25727384+ogniK5377@users.noreply.github.com>
Using the Qt::WindowStaysOnTopHint flag allows these dialogs to show up on top while running in fullscreen. However, if yuzu goes out of focus (by alt-tabbing or otherwise), this flag does not seem to have an effect.
The context menu was removed in Mjölnir Part 1 as part of the input rewrite as we were unaware of it's usage statistics.
However, as this was the only way to clear the inputs of individual buttons, this PR will re-add it back in.
Now that the GPU is initialized when video backends are initialized,
it's no longer needed to query components once the game is running: it
can be done when yuzu is booting.
This allows us to pass components between constructors and in the
process remove all Core::System references in the video backend.
This allows toggling motion on or off, and allows access to the motion configuration.
Also changes the [waiting] text for motion buttons to Shake! as this is how motion is connected to a player.
Due to the way Qt performs destruction of parent/child widgets, we need
to make the lifetime of the input subsystem shared across the main
window and the render window.
Abstracts most of the input mechanisms under an InputSubsystem class
that is managed by the frontends, eliminating any static constructors
and destructors. This gets rid of global accessor functions and also
allows the frontends to have a more fine-grained control over the
lifecycle of the input subsystem.
This also makes it explicit which interfaces rely on the input subsystem
instead of making it opaque in the interface functions. All that remains
to migrate over is the factories, which can be done in a separate
change.
The extended logging option is automatically disabled on boot but can be enabled afterwards, allowing the log file to go up to 1 GB during that session.
This commit also fixes a few errors that are present in the general debug menu.
Migrates a remaining common file over to the Common namespace, making it
consistent with the rest of common files.
This also allows for high-traffic FS related code to alias the
filesystem function namespace as
namespace FS = Common::FS;
for more concise typing.
Creates a new entry in the Emulation menu called "Configure Current Game..." that is only available if a game is currently being executed in yuzu. When selected, it opens the game properties dialog for the current game.
Thanks to @BSoDGamingYT for reminding me to do this.
We can query the given object name directly from the widget itself. This
removes any potential for forgetting to change the name if the widget
gets renamed and makes the API much simpler (just pass in the widget,
and not worry about its name).
In some rare instances, the patch manager is not able to find a control nca, fallback to the previous method of parsing a control nca through the loader if this occurs.
Previously NAND/SDMC installed titles would open device saves when they are supposed to be user saves. This is due to the control nca not being read and thus returns 0 for both GetDefaultNormalSaveSize() and GetDeviceSaveDataSize(). Fix this by utilizing the patch manager to read the control nca.
Previously the map of entries was being cleared while looping through each game directory, this resulted into all game directories except the last game dir to lose content metadata information. Fix this by clearing the entries only once.
Oddly enough the scan that feeds the manual content provider is hardcoded to scan 2 nested directories deep.
This effectively rendered the scan subdirectories setting useless as the manual content provider cannot find any games located more than 2 nested directories deep.
Furthermore, this behavior causes game files to be picked up by the manual content provider even if scan subdirectories is disabled.
FIx this by utilizing the behavior described when populating the game list for populating the content provider.
Hides the following options when the title id is 0:
- Open Save Location
- Open Mod Data Location
- Open Transferable Shader Cache
- All removal options except Remove Custom Configuration
This picks a default directory and file name. If on Windows and save-as screenshot saving is enabled, it asks the user, first defaulting to the default screenshot path, and with a default filename in the format `[title_id]_[year-mt-dy_hr-mn-sc-msc].png`. Otherwise, or on Linux for now, it simply saves a file in that directory with that file name.
This adds two options to the General -> UI tab. The first disables picking a place to save the file. The second chooses a default directory for saving screenshots.
The way the configurations are set up, it is not trivial to do this. I'll leave it as is, but the API selection, and the background color and volume slider selectors are kind of not following the style.
I noticed some of the code could be reduced to just passing the function an int, since I was doing the same thing over and over. Also clang-formats configure_graphics
Sets up initial support for implementing colored tristate functions. These functions color a QWidget blue when it's overriding a global setting, and discolor it when not. The lack of color indicates it uses the global state, replacing the Qt::CheckState::PartiallyChecked state with the global state.
Another error that got pass me and only noticed when I was doing the per-game settings UI rework. This prevents asynchronous GPU emulation from being disabled while multi core is enabled as a result of a poorly put together per-game config.
This is likely an oversight during a rebase. Guards use_multi_core to be only set when the global value is in use. It should not make a difference given the current code base, but makes the code sensible.
Provides the buildbot with one builder that is always tracking the
latest version of the C++ standard, allowing us to progressively rectify
our code and amend any differences between standards over time instead
of waiting for a complete standard change, potentially breaking a lot of
code all at once.
Key issues fixed:
- Progress dialog showing up as white/hanging/getting stuck/unresponsive.
Key changes:
- Progress dialog now shows progress as a function of all files instead of per nca within a file.
- Overwrite existing files will overwrite all files in the selection.
* Switch game settings to use a pointer
In order to add full per-game settings, we need to be able to tell yuzu to switch
to using either the global or game configuration. Using a pointer makes it easier
to switch.
* configuration: add new UI without changing existing funcitonality
The new UI also adds General, System, Graphics, Advanced Graphics,
and Audio tabs, but as yet they do nothing. This commit keeps yuzu
to the same functionality as originally branched.
* configuration: Rename files
These weren't included in the last commit. Now they are.
* configuration: setup global configuration checkbox
Global config checkbox now enables/disables the appropriate tabs in the game
properties dialog. The use global configuration setting is now saved to the
config, defaulting to true. This also addresses some changes requested in the PR.
* configuration: swap to per-game config memory for properties dialog
Does not set memory going in-game. Swaps to game values when opening the
properties dialog, then swaps back when closing it. Uses a `memcpy` to swap.
Also implements saving config files, limited to certain groups of configurations
so as to not risk setting unsafe configurations.
* configuration: change config interfaces to use config-specific pointers
When a game is booted, we need to be able to open the configuration dialogs
without changing the settings pointer in the game's emualtion. A new pointer
specific to just the configuration dialogs can be used to separate changes
to just those config dialogs without affecting the emulation.
* configuration: boot a game using per-game settings
Swaps values where needed to boot a game.
* configuration: user correct config during emulation
Creates a new pointer specifically for modifying the configuration while
emulation is in progress. Both the regular configuration dialog and the game
properties dialog now use the pointer Settings::config_values to focus edits to
the correct struct.
* settings: split Settings::values into two different structs
By splitting the settings into two mutually exclusive structs, it becomes easier,
as a developer, to determine how to use the Settings structs after per-game
configurations is merged. Other benefits include only duplicating the required
settings in memory.
* settings: move use_docked_mode to Controls group
`use_docked_mode` is set in the input settings and cannot be accessed from the
system settings. Grouping it with system settings causes it to be saved with
per-game settings, which may make transferring configs more difficult later on,
especially since docked mode cannot be set from within the game properties
dialog.
* configuration: Fix the other yuzu executables and a regression
In main.cpp, we have to get the title ID before the ROM is loaded, else the
renderer will reflect only the global settings and now the user's game specific
settings.
* settings: use a template to duplicate memory for each setting
Replaces the type of each variable in the Settings::Values struct with a new
class that allows basic data reading and writing. The new struct
Settings::Setting duplicates the data in memory and can manage global overrides
per each setting.
* configuration: correct add-ons config and swap settings when apropriate
Any add-ons interaction happens directly through the global values struct.
Swapping bewteen structs now also includes copying the necessary global configs
that cannot be changed nor saved in per-game settings. General and System config
menus now update based on whether it is viewing the global or per-game settings.
* settings: restore old values struct
No longer needed with the Settings::Setting class template.
* configuration: implement hierarchical game properties dialog
This sets the apropriate global or local data in each setting.
* clang format
* clang format take 2
can the docker container save this?
* address comments and style issues
* config: read and write settings with global awareness
Adds new functions to read and write settings while keeping the global state in
focus. Files now generated per-game are much smaller since often they only need
address the global state.
* settings: restore global state when necessary
Upon closing a game or the game properties dialog, we need to restore all global
settings to the original global state so that we can properly open the
configuration dialog or boot a different game.
* configuration: guard setting values incorrectly
This disables setting values while a game is running if the setting is
overwritten by a per game setting.
* config: don't write local settings in the global config
Simple guards to prevent writing the wrong settings in the wrong files.
* configuration: add comments, assume less, and clang format
No longer assumes that a disabled UI element means the global state is turned
off, instead opting to directly answer that question. Still however assumes a
game is running if it is in that state.
* configuration: fix a logic error
Should not be negated
* restore settings' global state regardless of accept/cancel
Fixes loading a properties dialog and causing the global config dialog to show
local settings.
* fix more logic errors
Fixed the frame limit would set the global setting from the game properties
dialog. Also strengthened the Settings::Setting member variables and simplified
the logic in config reading (ReadSettingGlobal).
* fix another logic error
In my efforts to guard RestoreGlobalState, I accidentally negated the IsPowered
condition.
* configure_audio: set toggle_stretched_audio to tristate
* fixed custom rtc and rng seed overwriting the global value
* clang format
* rebased
* clang format take 4
* address my own review
Basically revert unintended changes
* settings: literal instead of casting
"No need to cast, use 1U instead"
Thanks, Morph!
Co-authored-by: Morph <39850852+Morph1984@users.noreply.github.com>
* Revert "settings: literal instead of casting
"
This reverts commit 95e992a87c898f3e882ffdb415bb0ef9f80f613f.
* main: fix status buttons reporting wrong settings after stop emulation
* settings: Log UseDockedMode in the Controls group
This should have happened when use_docked_mode was moved over to the controls group
internally. This just reflects this in the log.
* main: load settings if the file has a title id
In other words, don't exit if the loader has trouble getting a title id.
* use a zero
* settings: initalize resolution factor with constructor instead of casting
* Revert "settings: initalize resolution factor with constructor instead of casting"
This reverts commit 54c35ecb46a29953842614620f9b7de1aa9d5dc8.
* configure_graphics: guard device selector when Vulkan is global
Prevents the user from editing the device selector if Vulkan is the global
renderer backend. Also resets the vulkan_device variable when the users
switches back-and-forth between global and Vulkan.
* address reviewer concerns
Changes function variables to const wherever they don't need to be changed. Sets Settings::Setting to final as it should not be inherited from. Sets ConfigurationShared::use_global_text to static.
Co-Authored-By: VolcaEM <volcaem@users.noreply.github.com>
* main: load per-game settings after LoadROM
This prevents `Restart Emulation` from restoring the global settings *after* the per-game settings were applied. Thanks to BSoDGamingYT for finding this bug.
* Revert "main: load per-game settings after LoadROM"
This reverts commit 9d0d48c52d2dcf3bfb1806cc8fa7d5a271a8a804.
* main: only restore global settings when necessary
Loading the per-game settings cannot happen after the ROM is loaded, so we have to specify when to restore the global state. Again thanks to BSoD for finding the bug.
* configuration_shared: address reviewer concerns except operator overrides
Dropping operator override usage in next commit.
Co-Authored-By: LC <lioncash@users.noreply.github.com>
* settings: Drop operator overrides from Setting template
Requires using GetValue and SetValue explicitly. Also reverts a change that broke title ID formatting in the game properties dialog.
* complete rebase
* configuration_shared: translate "Use global configuration"
Uses ConfigurePerGame to do so, since its usage, at least as of now, corresponds with ConfigurationShared.
* configure_per_game: address reviewer concern
As far as I understand, it prevents the program from unnecessarily copying strings.
Co-Authored-By: LC <lioncash@users.noreply.github.com>
Co-authored-by: Morph <39850852+Morph1984@users.noreply.github.com>
Co-authored-by: VolcaEM <volcaem@users.noreply.github.com>
Co-authored-by: LC <lioncash@users.noreply.github.com>
This commit: Implements CPU Interrupts, Replaces Cycle Timing for Host
Timing, Reworks the Kernel's Scheduler, Introduce Idle State and
Suspended State, Recreates the bootmanager, Initializes Multicore
system.
