Summary:
Fixes T12986. I caught this bug in the changes from D18584: when we moved a large hunk to file storage, we would decompress it but keep the "deflated" flag. This could cause confusion when loading it later. I missed this in testing since I wasn't exhaustive enough in checking hunks and didn't run into a compressed one.
Instead of compressing on `save()`, compress during the normal workflow.
We currently never advise users to run this workflow so I didn't bother trying to clean up possible existing migrations.
Test Plan:
- Ran `bin/differential migrate-hunk` on compressed hunks, moving them to and from file storage. Saw them work correctly and remain compressed.
- Created new small (uncompressed) and large (compressed) hunks, verified they work properly and get compressed (if applicable).
- Used `bin/cache purge --caches changeset` to clear changeset caches and make sure the actual table was being hit.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12986
Differential Revision: https://secure.phabricator.com/D18624
Summary:
Ref T12987. I was focused on the RefCursor table and overlooked that we need some care on this key.
It's currently possible to run `bin/storage upgrade --no-adjust`, then start Phabricator, and end up with duplicate records in this table. If you try to run `bin/storage adjust` later, it will try to add the unique key but fail. This is unusual for normal installs (they usually do not use `--no-adjust`) but we do it in the cluster and I did this exact thing on `secure`.
Normally, to avoid this, when a new table with a unique key is introduced, we also add a migration to explicitly add that key.
This is mostly harmless in this case. Fix this mistake (force the table to contain only unique rows; add the key) and try using `LOCK TABLES` to make this atomic. If this doesn't cause problems we can use this in similar situations in the future.
The "alter table may unlock things" warning comes from here:
https://dev.mysql.com/doc/refman/5.7/en/lock-tables.html
It seems like it's fine to issue `UNLOCK TABLES` even if you don't have any locks, so I think this script should always do the right thing now, regardless of ALTER TABLE unlocking or not unlocking tables.
Test Plan: Ran `bin/storage upgrade -f`, saw table end up in the right state. I'll also check this on `secure`, where the starting state is a little messier.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12987
Differential Revision: https://secure.phabricator.com/D18623
Summary: Despite how I (and everyone else?) pronounce it, it is spelled with an "a". See PHI38.
Test Plan: Googled both spellings.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18622
Summary:
See PHI71. These didn't get properly updated when we wrote Subprojects and Milestones, and should use materialized members, not raw members. Swap the query so projects you are an indirect member of (e.g., milestones you are a member of the parent for, and parent projects you are a member of a subproject of) are included in the result list.
Also fix a bad typeahead datasource.
Test Plan:
- Ran a dry run with the test console, saw project PHIDs for milestones and parent projects in the raw field value.
- Tried to set "Author's projects" to a user, no longer could.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18619
Summary:
Ref T11823. I think this is the last callsite which relies on the old data format: `bin/repository parents` rebuilds a cache which we don't currently use very heavily.
Update it to work with the new data.
Test Plan: Ran `bin/repository parents <repository> --trace`, saw successful script execution and reasonable-looking output.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11823
Differential Revision: https://secure.phabricator.com/D18615
Summary:
Ref T11823. This is the meaty part of the change, and updates `RefEngine` to use separate RefCursor (for names) and RefPosition (for actual commit positions) tables.
I'll hold this whole series until after the release cut so it has some time to bake on `secure` to look for issues. It's also not a huge problem if there are bugs here since these tables are just caches anyway, although they do feed into some other things, and obviously it's never good to have bugs.
Test Plan:
- This logic can be invoked directly with `bin/repository refs <repository> --trace --verbose`.
- Ran that on unchanged repositories, new branches, removed branches, and modified branches. Saw appropriate output and cursor positions.
- Ran on a mercurial repository to test the close/open logic, saw it correct open/closed state of incorrect positions.
- Browed around Diffusion in various repositories.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11823
Differential Revision: https://secure.phabricator.com/D18614
Summary:
Ref T11823. This change isn't standalone, but prepares for the more involved code change by dropping obsolete columns from the RefCursor table and adding the unique key we need to prevent the ambiguous/duplicate refs issue.
This data was moved to the RefPosition table in D18612.
Test Plan: Ran storage upgrade. See next revision for more substantial testing of this change series.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11823
Differential Revision: https://secure.phabricator.com/D18613
Summary:
Ref T11823. This populates the new RefPosition table based on the existing RefCursor table, and deletes now-duplicate rows in the RefCursor table so the next change can add a unique key.
This change is not standalone, and there need to be separate code updates. I have a rough version of that written, but this migration needs to happen first to test it.
I'll hold this whole series of changes until after the release cut and until the code is updated.
Test Plan: Ran migration, spot-checked database tables. Saw redundant rows remove and correct-looking rows populated into the new RefPosition table.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11823
Differential Revision: https://secure.phabricator.com/D18612
Summary:
Ref T11823. Currently, we have a "RefCursor" table which stores rows like `<branch or tag name, commit it is pointing at>` with some more data.
Because Mercurial can have a single branch pointing at several different places, this table must allow multiple rows with the same branch or tag name.
Among other things, this means there isn't a single PHID which can be used to identify a branch name in a stable way. However, we have several UIs where we want to be able to do this.
Some specific examples where we run into trouble: in Mercurial, if there are 5 heads for "default", that means there are 5 phids. And currently, if someone deletes a branch, we lose the PHID for it. Instead, we'd rather retain it so the whole world doesn't break if you accidentally delete a branch and then fix it a little later.
(I'll likely hold this until the rest of the logic is fleshed out a little more in followup changes.)
Test Plan: Ran `bin/storage upgrade`, saw the table get created without warnings.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11823
Differential Revision: https://secure.phabricator.com/D18602
Summary:
See <https://discourse.phabricator-community.org/t/unable-to-use-current-mercurial-on-debian-stretch/391>.
The Mercurial commit is helpful in particular: <https://www.mercurial-scm.org/repo/hg/rev/77eaf9539499>
We weren't vulnerable to the security issue (users can not control any part of the command) but pass the working directory explicitly to get past the new safety check.
I left `setCWD()` in place (a few lines below) just because it can't hurt, and in some other contexts it sometimes matter (for example, if commit hooks execute, they might inherit the parent CWD here or in other VCSes).
Test Plan:
- Cloned from a Mercurial repo locally over HTTP.
- Verified that SSH cloning already uses `-R` (it does, see `DiffusionMercurialServeSSHWorkflow`).
- Did not actually upgrade to Mercurial 4.0/4.1.3 to completely verify this, but a user in the Discourse thread asserted that a substantially similar fix worked correctly.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18611
Summary: See T12414. This just gets started; we still need edit endpoints for network interfaces and bindings.
Test Plan: Created some devices/services from the conduit UI.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18605
Summary:
See PHI66. See that issue for context. This UI is bad broken legacy junk, but was especially broken when reporting merges.
These do not currently generate a "status" transaction, so they were never counted as task closures. Pretend they're normal closures.
This is still wrong, but should be much closer to the real numbers. Specifically, if you merge a closed task into another task, it will incorrectly be counted as an extra close. This could result in negative tasks, but the numbers should be much closer to reality than they are today even so.
The "Facts" application (T1562) is the real pathway forward here in the longer term.
Test Plan:
- Moved my `maniphest_transactions` table aside with `RENAME TABLE ...`.
- Created a new empty table with `CREATE TABLE ... LIKE ...`.
- Reloaded reports UI, saw empty chart.
- Created, closed, and reopened tasks while reloading the chart, saw accurate reporting.
- Merged an open task into another task, saw bad reporting.
- Applied patch, saw the right chart again.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18601
Summary:
Ref T11823. See PHI68. T11823 has a full description of this issue and a plan to fix it, but the full plan is relatively complicated.
Until that can happen, provide a workaround for the biggest immediate issue, where multiple copies of a ref cursor can cause `executeOne()` to throw, since it expects a single result. In practice, these copies are always identical so we can just pick the first one.
This will get cleaned up once T11823 is fixed properly.
Test Plan:
Forced the table into a duplicate/ambiguous state, reproduced a similar-looking error:
{F5180999}
Applied the patch, got the "Land" to work as expected:
{F5181000}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11823
Differential Revision: https://secure.phabricator.com/D18599
Summary:
Ref T12033. This is a very narrow fix for this issue, but it should fix the major error: don't attach patches if they're bigger than the mail body limit (by default, 512KB).
Specifically, the logs from an install in T12033 show a 112MB patch being attached, and that's the biggest practical problem here.
I'll follow up on the tasks with more nuanced future work.
Test Plan: Enabled `differential.attach-patches`, saw a patch attached to email. Set the byte limit very low, saw patches get thrown away.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12033
Differential Revision: https://secure.phabricator.com/D18598
Summary:
Fixes T12979. In D18457, we added a "No Notifications" setting to let users disable the blue and yellow pop-up notifications that alert you when an object has been updated, since some users found them distracting.
However, the change made "do nothing" the default, so all other `JX.Notification` callsites -- which never pass a preference -- were effectively turned off no matter what your setting was set to. This includes the "Read-Only" mode warning (grey), the "High Security" mode warning (purple), the "timezone" warning, and a few others.
Tweak things a little bit so the setting applies to ONLY blue and yellow ("object you're following was updated" / "this object was updated") notifications, not other types of popup notifications.
Test Plan:
- With notifications on in settings, got blue notifications and "Read-only".
- With notifications off in settings, got "Read-only" but no blue notifications.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12979
Differential Revision: https://secure.phabricator.com/D18600
Summary:
Ref T12819. This is shipping, so issue upgrade guidance to instruct installs to rebuild the index.
Also generate a new `quickstart.sql` since we haven't regenerated in a bit and there's been a large amount of table churn fairly recently.
Test Plan: Ran `bin/storage upgrade`, saw guidance notification in UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18594
Summary:
Ref T12819. In D18581, I corrected one bug (ngram selection for terms) but introduced a minor new bug. We now pass `' query '` (term corpus with boundary spaces) to the stemmer, but it bails out on this since English words don't start with spaces.
Trim these extra boundary spaces off before invoking the stemmer.
The practical effect of this is that searching for non-stem variations of a word ("detection") now finds stemmed variations again ("detect"). Prior to fixing this bug, the stem could find longer variations but not the other way around.
Test Plan: Searched for "detection", found results matching "detect" after patch (and saw same results for "detect" and "detection").
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18593
Summary: Ref T12819. Adds some documentation for `-term`, `~term`, `title:term`, etc.
Test Plan: Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18592
Summary: Ref T12819. Swaps constants so existing configurations that use a "mysql" engine now use the Ferret engine, not an InnoDB/MyISAM FULLTEXT engine.
Test Plan: Swapped my local config back to "mysql" (the default), saw Ferret engine results in the UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18590
Summary:
Ref T12819. These render the little "Searched For: X, Y, U V" hint about how something was parsed.
(This might get a "substring" color or "title only" color or something in the future.)
Test Plan: {F5178807}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18589
Summary:
Ref T12819. Obsoleted by the Ferret engine "Query" field.
This is a compatibility break, I'll note it in the changelog.
Test Plan: Searched for repositories by name with "Query" instead of "Name Contains".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18588
Summary:
Ref T12819. Show the new Ferret engine fields (and enable the indexer) unconditionally.
Also pull them to the top since they're fairly general-purpose and appear more broadly now, and also they actually work correctly (WOW).
Some redundant fields (like "Name Contains" in Repositories and Owners) could probably be removed now, I may clean those up in a followup.
Test Plan: Browsed around, saw Ferret fields in UI without "(Prototype)" suffix.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18587
Summary:
Ref T12819. Obsoleted by the Ferret engine, which is unprototyping shortly.
This breaks compatibility in two ways:
- `maniphest.query` no longer supports "fullText" (now throws an explicit exception).
- Existing saved searches with a "Contains Words" constraint will no longer have that constraint.
It seems unlikely (?) that either of these are seeing too much use, and they should be easy to fix. I'll note them in the changelog.
Test Plan: Viewed Maniphest, no more "Contains Words" field. Called `maniphest.query` with "fullText", got explicit exception.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18586
Summary:
Ref T12932. For long-lived installs, one of the largest tables tends to be the hunk data table. Although it doesn't grow tremendously fast, it's also well suited to storage in Files instead of the database (infrequent access, relatively large blobs of data, mostly one-at-a-time access), and earlier work anticipated eventually adding support for Files storage.
Make Files storage work, and provide `bin/differential migrate-hunk` to manually test/migrate hunks. This is currently the only way hunks get moved to file storage, but I expect to add a GC step which moves them to File storage after 30 days shortly.
The immediate motivation for this is to relieve storage pressure on db001/db002 so we have more headroom for deploying the Ferret engine and its larger indexes (see also T12819).
Test Plan:
- Used `bin/differential migrate-hunk` to move a hunk to and from file storage, verified it survived intact.
- Downloaded the actual stored file, sanity-checked it. Verified permissions.
- Destroyed a diff with `bin/remove destroy`, saw the hunk and file storage destroyed.
- Verified that going from file -> text destroys the old file properly with `migrate-hunk --trace ...`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12932
Differential Revision: https://secure.phabricator.com/D18584
Summary:
Ref T12819. For queries like `v0.2`, we would incorrectly search for ngrams including `0.2`, but this is only a substring ngram: the term corpus splits this into `v0` and `2`, so `0.2` is not in the ngrams table.
When executing term queries, search for term ngrams instead. This makes "v0.2" work properly again.
Test Plan: Searched for "v0.2", found a task with "v0.2" in the title.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18581
Summary:
Ref T12819. The "full" field has all other fields, and the "core" field has "title" and "body". Due to the way the "full" and "core" fields were being built, the "core" field also got included in the "full" field, so the "full" field has two copies of the title, two copies of the body, and then one copy of everything else.
Put only one copy of each distinct thing in each "full" and "core". Also, simplify the logic a little bit so we build these virtual fields in a more consistent way.
Test Plan: Ran `bin/search index` and looked at the fields in the database, saw less redundant information.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18580
Summary:
Ref T12819. Currently, strings are split only on spaces, but newlines (and, if they exist, tabs) should also split strings.
Without this, we can fail to get the proper term boundary tokens for words which begin at the start of a line or end at the end of a line.
Test Plan: Reindexed a document with "xyz\nabc", saw `"yz "` and `" ab"` term boundary tokens generate properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18579
Summary:
Ref T12819. This worked right in a non-cluster environment, but `bin/storage upgrade` iterates over each master in a partitioned cluster environment.
Tweak the API so `bin/storage analyze` targets a single host but `bin/storage upgrade` can hit all the masters.
Test Plan: Will run `bin/storage upgrade` in production again. Ran `upgrade` and `analyze` locally, still work fine.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18576
Summary: Miss this with earlier pass, updates the VCS password page.
Test Plan: Try to set a vcs password
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18574
Summary:
Ref T12819. Normallly "ANALYZE TABLE" is like sprinkling magic pixie dust on the database and hoping it will make "good vibes" that cause it to go faster, but in at least some concrete cases with the ngrams tables there really was a key cardinality issue which ANALYZE TABLE corrected, fixing bogus query plans.
Add `bin/storage analyze` to analyze all tables, and make `bin/storage upgrade` run it after adjustment if `--no-adjust` is not specified, and make `bin/storage adjust` run it always.
This runs in a couple seconds and should never hurt anything, so it should be fine to sprinkle lots of pixie dust into the `bin/storage` workflow.
Test Plan: Ran `bin/storage analyze`. Ran `bin/storage upgrade`, saw analyze run. Totally felt great vibes and really aligned chakras on the database.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18573
Summary: Adds some side margin here.
Test Plan: error out a form field in a white box
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18571
Summary: Ref T12819. More ferret engine support.
Test Plan: Indexed and searched commits and repositories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18572
Summary: Ref T12819. Support for Pholio.
Test Plan: Indexed and searched mocks.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18569
Summary: Ref T12819. Adds ferret engine support for Calendar events.
Test Plan: Indexed and queried calendar events.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18568
Summary: Ref T12819. Adds Ferret engine support.
Test Plan: Indexed and searched for documents.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18567
Summary: Ref T12819. Adds support for projects.
Test Plan: Indexed and searched for projects.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18566
Summary: Ref T12819. Mostly straightforward, with a couple of minor query modernization things.
Test Plan: Indexed and searched for posts and blogs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18565
Summary: Ref T12819. Same deal as before, but smaller diffs after D18559.
Test Plan: Indexed and searched for packages.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18564
Summary:
See brief discussion in D18554. All the index tables are the same for every application (and, at this point, seem unlikely to change) and we never actually pass these objects around (they're only used internally).
In some other cases (like Transactions) not every application has the same tables (for example, Differential has extra field for inline comments), and/or we pass the objects around (lots of stuff uses `$xactions` directly).
However, in this case, and in Edges, we don't interact with any representation of the database state directly in much of the code, and it doesn't change from application to application.
Just automatically define document, field, and ngram tables for anything which implements `FerretInterface`. This makes the query and index logic a tiny bit messier but lets us delete a ton of boilerplate classes.
Test Plan: Indexed objects, searched for objects. Same results as before with much less code. Ran `bin/storage upgrade`, got a clean bill of health.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18559
Summary: Ref T12819. Adds Ferret support to Passphrase.
Test Plan: Indexed credentials, searched for credentials.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18556
Summary: Ref T12819. Adds Ferret engine support to initiatives.
Test Plan: Indexed and searched for initiatives.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18555
Summary: Ref T12819. Prepares for Ferret engine support.
Test Plan: Queried for various initiatives.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18554
Summary: Ref T12819. Prepares Fund to move to Ferret.
Test Plan: Searched for initiatives in Fund.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18553
Summary:
Ref T12819. Adds support for indexing user accounts so they appear in global fulltext results.
Also, always rank users ahead of other results.
Test Plan: Indexed users. Searched for a user, got that user.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18552
Summary:
Ref T12819. Currently, under the Ferret engine, we query each application's index separately and then aggregate the results.
At the moment, results are aggregated by type first, then by actual rank. For example, all the revisions appear first, then all the tasks.
Instead, surface the internal ranking data from the underlying query and sort by it.
Test Plan: Searched for "A B" with a task named "A B" and a revision named "A". Saw task first. Broadly, saw mixed task and revision order in result sets.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18551
Summary:
Ref T12819. I started trying to get individual engines to drive these constraints (e.g., `ManiphestTaskQuery` can do most of the work) but this is a big pain, especially since most engines don't support "any owner" or "no owner", and not everything has an owner, and so on and so on. Going down this path would have meant a huge pile of stub functions everywhere, I think.
Instead, drive these through the main engine using the fulltext document table, which already has everything we need to apply these constraints in a uniform way.
Also tweak some parts of query construction and result ordering.
Test Plan: Searched for documents by author, owner, unowned, any owner, tags, subscribers, fulltext in global search. Got sensible results without any application-specific code.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18550
