Summary:
Ref T5474. Allow columns to play a sound when tasks are dropped.
This is a little tricky because Safari has changed somewhat recently to require some gymnastics to play sounds when the user didn't explicitly click something. Preloading the sound on the first mouse interaction, then playing and immediately pausing it seems to work, though.
Test Plan: Added a trigger with 5 sounds. In Safari, Chrome, and Firefox, dropped a card into the column. In all browsers, heard a nice sequence of 5 sounds played one after the other.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20306
Summary:
Ref T13074. If you hit a prompt on a drop operation (today: MFA; in the future, maybe "add a comment" or "assign this task"), we currently leave the board in a bad semi-frozen state if you cancel the workflow by pressing "Cancel" on the dialog.
Instead, put things back the way they were.
Test Plan: Dragged an MFA-required card, cancelled the MFA prompt, got a functional board instead of a semi-frozen board I needed to reload.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13074
Differential Revision: https://secure.phabricator.com/D20305
Summary:
Ref T5474. The first rough cut of triggers showed some of the trigger rules in a tooltip when you hover over the "add/remove" trigger menu.
This isn't great since we don't have much room and it's a bit finnicky / hard to read.
Since we have a better way to show effects now in the drop preview, just use that instead. When you hover over the trigger menu, preview the trigger in the "drop effect" element, with a "Trigger: such-and-such" header.
Test Plan:
- This is pretty tough to screenshot.
- Hovered over menu, got a sensible preview of the trigger effects.
- Dragged a card over the menu, no preview.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20304
Summary:
Ref T5474. This provides a Herald-like UI for editing workboard trigger rules.
This probably has some missing pieces and doesn't actually save anything to the database yet, but the basics at least roughly work.
Test Plan: {F6299886}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20301
Summary:
Ref T10335. When you (for example) drag a "Resolved" task into a column with "Trigger: change status to resolved.", don't show a hint that the action will "Change status to resolved." since this isn't helpful and is somewhat confusing.
For now, the only visibility operator is "!=" since all current actions are simple field comparisons, but some actions in the future (like "add subscriber" or "remove project") might need other conditions.
Test Plan:
Dragged cards in ways that previously provided useless hints: move from column A to column B on a "Group by Priority" board; drag a resolved task to a "Trigger: change status to as resolved" column. Saw a more accurate preview in both cases.
Drags which actually cause effects still show the effects correctly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10335
Differential Revision: https://secure.phabricator.com/D20300
Summary:
Ref T10335. Ref T5474. When you drag-and-drop a card on a workboard, show a UI hint which lists all the things that the operation will do.
This shows: column moves; changes because of dragging a card to a different header; and changes which will be caused by triggers.
Not implemented here:
- Actions are currently shown even if they have no effect. For example, if you drag a "Normal" task to a different column, it says "Change priority to Normal.". I plan to hide actions which have no effect, but figuring this out is a little bit tricky.
- I'd like to make "trigger effects" vs "non-trigger effects" a little more clear in the future, probably.
Test Plan:
Dragged stuff between columns and headers, and into columns with triggers. Got appropriate preview text hints previewing what the action would do in the UI.
(This is tricky to take a screenshot of since it only shows up while the mouse cursor is down.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10335, T5474
Differential Revision: https://secure.phabricator.com/D20299
Summary:
Depends on D20274. Ref T10578. This is en route to an ordering by points, it's just a simpler half-step on the way there.
Allow columns to be sorted by creation date, so the newest tasks rise to the top.
In this ordering you can never reposition cards, since editing a creation date by dragging makes no sense. This will be true of the "points" ordering too (although we could imagine doing something like prompting the user, some day).
Test Plan: Viewed boards by "natural" (allows reordering both when dragging within and between columns), "priority" (reorder only within columns), and "creation date" (reorder never). Dragged cards around between and within columns, got apparently sensible behavior.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10578
Differential Revision: https://secure.phabricator.com/D20275
Summary:
Depends on D20273. Fixes T10722. Currently, we don't make it very clear when a card can't be edited. Long ago, some code made a weak attempt to do this (by hiding the "grip" on the card), but later UI changes hid the "grip" unconditionally so that mooted things.
Instead:
- Replace the edit pencil with a red lock.
- Provide cursor hints for grabbable / not grabbable.
- Don't let users pick up cards they can't edit.
Test Plan: On a workboard with a mixture of editable and not-editable cards, hovered over the different cards and was able to figure out which ones I could drag or not drag pretty easily. Picked up cards I could pick up, wasn't able to drag cards I can't edit.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10722
Differential Revision: https://secure.phabricator.com/D20274
Summary:
Depends on D20271. Ref T10333. When a column is empty but a board is grouped (by priority, owner, etc) render the headers properly.
When a column has headers, don't apply the "empty" style even if it has no cards. This style just makes some empty space so you can drag-and-drop more easily, but headers do the same thing.
Test Plan: {F6264611}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20272
Summary:
Depends on D20267. Depends on D20268. Ref T10333. Currently, we support "Natural" and "Priority" orders, but a lot of the particulars are pretty hard-coded, including some logic in `ManiphestTask`.
Although it's not clear that we'll ever put other types of objects on workboards, it seems generally bad that you need to modify `ManiphestTask` to get a new ordering.
Pull the ordering logic out into a `ProjectColumnOrder` hierarchy instead, and let each ordering define the things it needs to work (name, icon, what headers look like, how different objects are sorted, and how to apply an edit when you drop an object under a header).
Then move the existing "Natural" and "Priority" orders into this new hierarchy.
This has a minor bug where using the "Edit" workflow to change a card's priority on a priority-ordered board doesn't fully refresh card/header order since the response isn't ordering-aware. I'll fix that in an upcoming change.
Test Plan: Grouped workboards by "Natural" and "Priority", dragged stuff around within and between columns, grepped for all touched symbols.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20269
Summary:
Depends on D20266. Boards currently have several `whateverMap<cardPHID => stuff>` properties, but we can just move these all down into a `CardTemplate`, similar to the recently introduced `HeaderTemplate`.
The `CardTemplate` holds all the global information for a card, and then `Card` is specific for a particular copy in a column. Today, each `CardTemplate` has one `Card`, but a `CardTemplate` may have more than one card in the future (when we add subproject columns).
Test Plan: Viewed workboards in different sort orders and dragged stuff around, grepped for all affected symbols.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20267
Summary:
Depends on D20263. Ref T10333. I want to add groups like "Assignee" to workboards. This means you may have several tasks grouped under, say, "Alice".
When you drag the bottom-most task under "Alice" to the top, what does that mean?
Today, the only grouping is "Priority", and it means "change the task's secret/hidden global subpriority". However, this seems to generally be a somewhat-bad answer, and is quite complex. It also doesn't make much sense for an author grouping, since one task can't really be "more assigned" to Alice than another task.
Users likely intend this operation to mean "move it, visually, with no other effects" -- that is, user intent is to shuffle sticky notes around on a board, not edit anything substantive. The meaning is probably something like "this is similar to other nearby tasks" or "maybe this is a good place to start", which we can't really capture with any top-level attribute.
We could extend "subpriority" and give tasks a secret/hidden "sub-assignment strength" and so on, but this seems like a bad road to walk down. We'll also run into trouble later when subproject columns may appear on the board, and a user could want to put a task in different positions on different subprojects, conceivably.
In the "Natural" order view, we already have what is probably a generally better approach for this: a task display order particular to the column, that just remembers where you put the sticky notes.
Move away from "subpriority", and toward a world where we mostly keep sticky notes where you stuck them and move them around only when we have to. With no grouping, we still sort by "natural" order, as before. With priority grouping, we now sort by `<priority, natural>`. When you drag stuff around inside a priority group, we update the natural order.
This means that moving cards around on a "priority" board will also move them around on a "natural" board, at least somewhat. I think this is okay. If it's not intuitive, we could give every ordering its own separate "natural" view, so we remember where you stuck stuff on the "priority" board but that doesn't affect the "Natural" board. But I suspect we won't need to.
Test Plan:
- Viewed and dragged a natural board.
- Viewed and dragged a priority board.
- Dragged within and between groups of 0, 1, and multiple items.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20265
Summary:
Ref T13074. Today, in normal task list views in Maniphest (not workboards), you can (sometimes) reorder tasks if the view is priority-sorted.
I suspect no one ever does this, few users know it's supported, and that it was basically rendered obsolete the day we shipped workboards.
This also means that we need to maintain a global "subpriority" for tasks, which distinguishes between different tasks at the same priority level (e.g., "High") and maintains a consistent ordering on workboards.
As we move toward making workboards more flexible (e.g., group by author / owner / custom fields), I'd like to try moving away from "subpriority" and possibly removing it entirely, in favor of "natural order", which basically means "we kind of remember where you put the card and it works a bit like a sticky note".
Currently, the "natural order" and "subpriority" systems are sort of similar but also sort of in conflict, and the "subpriority" system can't really be extended while the "natural order / column position" system can.
The only real reason to have a global "subpriority" is to support the list-view drag-and-drop.
It's possible I'm wrong about this and a bunch of users love this feature, but we can re-evaluate if we get feedback in this vein.
(This just removes UI, the actual subpriority system is still intact and still used on workboards.)
Test Plan: Viewed task lists, was no longer able to drag stuff. Grepped for affected symbols. Dragged stuff in remaining grippable lists, like "Edit Forms" in EditEngine config.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13074
Differential Revision: https://secure.phabricator.com/D20263
Summary:
Ref T10333. Ref T8135. Depends on D20247. Allow users to drag-and-drop cards on a priority-sorted workboard under headers, even if the header has no other cards.
As of D20247, headers show up but they aren't really interactive. Now, you can drag cards directly underneath a header (instead of only between other cards). For example, if a column has only one "Wishlist" task, you may drag it under the "High", "Normal", or "Low" priority headers to select a specific priority.
(Some of this code still feels a little rough, but I think it will generalize once other types of sorting are available.)
Test Plan: Dragged cards within and between priority groups, saw appropriate priority edits applied in every case I could come up with.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333, T8135
Differential Revision: https://secure.phabricator.com/D20248
Summary:
Ref T10333. When workboards are ordered (for example, by priority), add headers to the various groups. Major goals are:
- Allow users to drag-and-drop to set values that no cards currently have: for example, you can change a card priority to "normal" by dragging it under the "normal" header, even if no other cards in the column are currently "Normal".
- Make future orderings more useful, particularly "order by assignee". We don't really have room to put the username on every card and it would create a fair amount of clutter, but we can put usernames in these headers and then reference them with just the profile picture. This also allows you to assign to users who are not currently assigned anything in a given column.
- Make the drag-and-drop behavior more obvious by showing what it will do more clearly (see T8135).
- Make things a little easier to scan in general: because space on cards is limited, some information isn't conveyed very clearly (for example, priority information is currently conveyed //only// through color, which can be hard to pick out visually and is probably not functional for users who need vision accommodations).
- Maybe do "swimlanes": this is pretty much a "swimlanes" UI if we add whitespace at the bottom of each group so that the headers line up across all the columns (e.g., "Normal" is at the same y-axis position in every column as you scroll down the page). Not sold on this being useful, but it's just a UI adjustment if we do want to try it.
NOTE: This only makes these headers work for display.
They aren't yet recognized as targets by the drag list UI, so you can't drag cards into an empty group. I'll tackle that in a followup.
Test Plan: {F6257686}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20247
Summary:
Ref T10334. Partly, this just improves visual feedback for all drag operations. After D20242, we can have cases where you (for example) drag a low-priority node to a very tall column on a priority-ordered workboard. In this case, the actual dashed-border-drop-target may not be on screen.
We might make the column scroll or put some kind of hint in the UI in this case, but an easy starting point is just to make the "yes, you're targeting this column" state a bit more clear.
Test Plan: Dragged tasks between columns, saw the border higlight on the target columns. This is very tricky to take a screenshot of.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10334
Differential Revision: https://secure.phabricator.com/D20245
Summary:
Ref T10334. When a workboard is ordered by priority, dragging from column "A" to a particular place in column "B" currently means "move this task to column B, and adjust its priority so that it naturally sorts into the location under my mouse cursor".
Users frequently find this confusing / undesirable.
To begin improving this, make "drag from column A to column B" and "drag from somewhere in column A to somewhere else in column A" into different operations. The first operation, a movement between columns, no longer implies an ordering change. The second action still does.
So if you actually want to change the priority of a task, you drag it within its current column. If you just want to move it to a different column, you drag it between columns.
This creates some possible problems:
- Some users may love the current behavior and just not be very vocal about it. I doubt it, but presumably we'll hear from them if we break it.
- If you actualy want to move + reorder, it's a bit more cumbersome now. We could possibly add something like "shift + drag" for this if there's feedback.
- The new behavior is probably less surprising, but may not be much more obvious. Future changes (for example, in T10335) should help make it more clear.
- When you mouse cursor goes over column B, the card dashed-rectangle preview target thing jumps to the correct position in the column -- but that may not be under your mouse cursor. This feels pretty much fine if the whole column fits on screen. It may not be so great if the column does not fit on screen and the dashed-rectangle-thing has vanished. This is just a UI feedback issue and we could refine this later (scroll/highlight the column).
Test Plan:
- Created several tasks at different priority levels, sorted a board by priority, dragged tasks between columns. Dragging from "A" to "B" no longer causes a priority edit.
- Also, dragged within a column. This still performs priority edits.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10334
Differential Revision: https://secure.phabricator.com/D20242
Summary:
Ref T12822. Ref PHI878. This is some leftover code from the old selection behavior that prevented visual selection of the left side of a diff if the user clicked on the right -- basically, a much simpler attack on what ultimately landed in D20191.
I think the change from `th` to `td` "broke" it so it didn't interfere with the other behavior, which is why I didn't have to remove it earlier. It's no longer necessary, in any case.
Test Plan: Grepped for behavior name, selected stuff on both sides of a diff.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12822
Differential Revision: https://secure.phabricator.com/D20196
Summary:
Ref T12822. Fixes a few things:
- Firefox selection of weird ranges with an inline between the start and end of the range now works correctly.
- "Show More Context" rows now render, highlight, and select properly.
- Prepares for nodes to have copy-text which is different from display-text.
- Don't do anything too fancy in 1-up/unified mode. We don't copy line numbers after the `content: attr(data-n)` change, but that's as far as we go, because trying to do more than that is kind of weird and not terribly intuitive.
Test Plan:
- Selected and copied weird ranges in Firefox.
- Kept an eye on "Show More Context" rows across select and copy operations.
- Generally poked around in Safari/Firefox/Chrome.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12822
Differential Revision: https://secure.phabricator.com/D20192
Summary:
Ref T13161. Ref T12822. Today, we use invisible Zero-Width Spaces to try to improve copy/paste behavior from Differential.
After D20188, we no longer need ZWS characters to avoid copying line numbers. Get rid of these secret invisible semantic ZWS characters completely.
This means that both the left-hand and right-hand side of diffs become copyable, which isn't desired. I'll fix that with a hundred thousand lines of Javascript in the next change: this is a step toward everything working better, but doesn't fix everything yet.
Test Plan:
- Grepped for `zws`, `grep -i zero | grep -i width`.
- Copied text out of Differential: got both sides of the diff (not ideal).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T12822
Differential Revision: https://secure.phabricator.com/D20189
Summary:
Ref T13161. Ref T12822. See PHI870. Long ago, the web was simple. You could leave your doors unlocked, you knew all your neighbors, crime hadn't been invented yet, and `<th>3</th>` was a perfectly fine way to render a line number cell containing the number "3".
But times have changed!
- In PHI870, this isn't good for screenreaders. We can't do much about this, so switch to `<td>`.
- In D19349 / T13105 and elsewhere, this `::after { content: attr(data-n); }` approach seems like the least bad general-purpose approach for preventing line numbers from being copied. Although Differential needs even more magic beyond this in the two-up view, this is likely good enough for the one-up view, and is consistent with other views (paste, harbormaster logs, general source display) where this technique is sufficient on its own.
The chance this breaks //something// is pretty much 100%, but we've got a week to figure out what it breaks. I couldn't find any issues immediately.
Test Plan:
- Created, edited, deleted inlines in 1-up and 2-up views.
- Replied, keyboard-navigated, keyboard-replied, drag-selected, poked and prodded everything.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T12822
Differential Revision: https://secure.phabricator.com/D20188
Summary:
Depends on D20181. Depends on D20182. Fixes T3498. Ref T13161. My claim, at least, is that D20181 can be tweaked to be good enough to throw away this "feature" completely.
I think this feature was sort of a mistake, where the ease of access to `diff -bw` shaped behavior a very long time ago and then the train just ran a long way down the tracks in the same direction.
Test Plan: Grepped for `whitespace`, deleted almost everything. Poked around the UI a bit. I'm expecting the whitespace changes to get some more iteration this week so I not being hugely pedantic about testing this stuff exhaustively.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T3498
Differential Revision: https://secure.phabricator.com/D20185
Summary: See PHI1017. This is a trivial fix even though these burnups are headed toward a grisly fate.
Test Plan: Moused over some January datapoints, saw "1" instead of "0".
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19967
Summary:
Ref T13222. In D19918, I refactored how timelines get "view data". Today, this is always additional data about which images/changesets/diffs are visible on the current revision/commit/mock, so we can tell if inline comments should be linked to a `#anchor` on the same page (if the inline is rendered there somewhere) or to a `/D123?id=1&vs=2` full link on a different page (if it isn't), but in general this could be any sort of state information about the current page that affects how the timeline should render.
Previously, comment previews did not use any specialized object code and always rendered a "generic" timeline story. This was actually a bug, but none of the code we have today cares about this (since it's all inline related, and inlines render separately) so it never impacted anything.
After the `TimelineEngine` change, the preview renders with Differential-specific code. This is more correct, but we were not passing the preview the "view data" so it broke.
This preview doesn't actually need the view data and we could just make it bail out if it isn't present, but pass it through for consistency and so this works like we'd expect if we do something fancier with view data in the future.
Test Plan: Viewed comment and inline comment previews in Differential, saw old behavior restored.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19943
Summary:
Depends on D19914. Ref T11351. Some of the Phoilo rabbit holes go very deep.
`PhabricatorApplicationTransactionInterface` currently requires you to implement `willRenderTimeline()`. Almost every object just implements this as `return $timeline`; only Pholio, Diffusion, and Differential specialize it. In all cases, they are specializing it mostly to render inline comments.
The actual implementations are a bit of a weird mess and the way the data is threaded through the call stack is weird and not very modern.
Try to clean this up:
- Stop requiring `willRenderTimeline()` to be implemented.
- Stop requiring `getApplicationTransactionViewObject()` to be implemented (only the three above, plus Legalpad, implement this, and Legalpad's implementation is a no-op). These two methods are inherently pretty coupled for almost any reasonable thing you might want to do with the timeline.
- Simplify the handling of "renderdata" and call it "View Data". This is additional information about the current view of the transaction timeline that is required to render it correctly. This is only used in Differential, to decide if we can link an inline comment to an anchor on the same page or should link it to another page. We could perhaps do this on the client instead, but having this data doesn't seem inherently bad to me.
- If objects want to customize timeline rendering, they now implement `PhabricatorTimelineInterface` and provide a `TimelineEngine` which gets a nice formal stack.
This leaves a lot of empty `willRenderTimeline()` implementations hanging around. I'll remove these in the next change, it's just going to be deleting a couple dozen copies of an identical empty method implementation.
Test Plan:
- Viewed audits, revisions, and mocks with inline comments.
- Used "Show Older" to page a revision back in history (this is relevant for "View Data").
- Grepped for symbols: willRenderTimeline, getApplicationTransactionViewObject, Legalpad classes.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11351
Differential Revision: https://secure.phabricator.com/D19918
Summary:
Ref T13216. See PHI985. When you click a line number to start an inline comment, we intend to initiate the action only if you used the left mouse button (desktop) or a touch (tablet/device).
We currently have a `not right` condition for doing this, but it only excludes right clicks, not middle clicks (or other nth-button clicks). The `not right` condition was sligthly easier to write, but use an `is left` condition instead of a `not right` condition.
Test Plan:
- In Safari, Firefox and Chrome:
- Used left click to start an inline.
- Used middle click to do nothing (previously: started an inline).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19836
Summary:
See PHI975. Ref T13216. Ref T2543. Previously, see D19204 and PHI433.
When you're acting on a draft revision, we change the button text to "Submit Quietly" as a hint that your actions don't generate notifications yet.
However, this isn't accurate when one of your actions is "Request Review", which causes the revision to publish.
Allow actions to override the submit button text, and make the "Request Review" action change the button text to "Publish Revision".
The alternative change I considered was to remove the word "Quietly" in all cases.
I'm not //thrilled// about how complex this change is to adjust one word, but the various pieces are all fairly clean individually. I'm not sure we'll ever be able to use it for anything else, but I do suspect that the word "Quietly" was the change in D19204 with the largest effect by far (see T10000).
Test Plan:
- Created a draft revision. Saw "Submit Quietly" text.
- Added a "Request Review" action, saw it change to "Publish Revision".
- Reloaded page, saw stack saved and "Publish Revision".
- Removed action, saw "Submit Quietly".
- Repeated on a non-draft revision, button stayed put as "Submit".
- Submitted the various actions, saw them have the desired effects.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216, T2543
Differential Revision: https://secure.phabricator.com/D19810
Summary:
See <https://hackerone.com/reports/434116>. Slowvote has a piece of Javascript that attempts to let you vote on `{V123}` polls inline.
It does not work: nothing ever triggers it (nothing renders a control with a `slowvote-option` sigil).
At least for now, just remove it. It has a completely separate pathway in the controller and both pathways are buggy, so this makes fixing them easier.
Test Plan: Voted in plurality and approval polls via Slowvote and the embedded widget.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19773
Summary: See PHI871. Ref T13197. These sections are only divided visually and don't have textual headers. Add aural headers.
Test Plan: {F5875471}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19654
Summary:
Depends on D19594. See PHI823. Ref T13164.
- Add a label for the "X" button in comment areas, like "Remove Action: Change Subscribers".
- Add a label for the floating header display options menu in Differential.
- Add `role="button"` to `PHUIButtonView` objects that we render with an `<a ...>` tag.
Test Plan:
Viewed a revision with `?__aural__=true`:
- Saw "Remove Action: ..." label.
- Saw "Display Options" label.
- Used inspector to verify that some `<a class="button" ...>` now have `<a class="button" role="button" ...>`. This isn't exhaustive, but at least improves things. A specific example is the "edit", "reply", etc., actions on inline comments.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19595
Summary:
Ref T13164. See PHI748. Path validation has a 750ms timeout which blames to rP5038ab850c, in 2011.
Production path validation is sometimes taking more than 750ms, particularly on the initial page load where we may validate many paths simultaneously.
I have no idea why we have this timeout, and it isn't consistent with how we perform other AJAX requests. Just remove it.
Test Plan:
- Reproduced issue in production, saw all validation calls failing at 750ms. Actual underlying calls succeed, they just take more than 750ms to resolve.
- Loaded path validator locally, got green checkmark.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19575
Summary:
Ref T13164. See PHI693. In Differential, you can {nav View Options > View Standalone} to get a standalone view of a single changeset. You can also arrive here via the big changeset list for revisions affecting a huge number of files.
We currently suggest that all the keyboard shortcuts work, but some do not. In particular, the "Next File" and "Previous File" keyboard shortcuts (and some similar shortcuts) do not work. In the main view, the next/previous files are on the same page. In the standalone view, we'd need to actually change the URI.
Ideally, we should do this (and, e.g., put prev/next links on the page). As a first step toward that, hide the nonfunctional shortcuts to stop users from being misled.
Test Plan:
- Viewed a revision in normal and standalone views.
- No changes in normal view, and all keys still work ("N", "P", etc).
- In standalone view, "?" no longer shows nonfunctional key commands.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19571
Summary: Ref T13151. See PHI616. There's a bug where the current banner changeset isn't cleared correctly when we hide the banner.
Test Plan:
- View revision with several changesets.
- Scroll down slowly through first changeset until banner appears.
- Scroll up until banner disappears.
- Scroll back down.
- Before: banner fails to reappear (code still thinks it's visible and we don't want to update it).
- After: banner reappears correctly.
Reviewers: amckinley, jmeador
Reviewed By: jmeador
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19474
Summary:
See PHI604. Ref T13130. Ref T13105. There's currently no way to turn blame off in Diffusion. Add a "Hide Blame" option to the "View Options" dropdown so it can be toggled off.
Also fix a couple of bugs around this: for example, if you loaded a Jupyter notebook and then switched to "Source" view, blame would incorrectly fail to activate because the original rendering of the "stage" used an asynchronous engine so `willRenderRef()` wasn't called to populate blame.
Test Plan:
- Viewed a source file, toggled blame off/on, reloaded page to see state stick in URL.
- Viewed a Jupyter notebook, toggled to "Source" view, saw blame.
- Viewed stuff in Files (no blame UI options).
- Tried to do some invalid stuff like toggle blame on a non-blame engine (options disable properly).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13130, T13105
Differential Revision: https://secure.phabricator.com/D19414
Summary:
Ref T13130. See PHI617.
The new build log UI has tags like `<a href="...">Show More Above <span icon>^</span></a>`. If you click the little "^" icon, the event target is the `<span />` instead of the `<a />` so we expand on the wrong node.
Instead, select the `<a />` by sigil explicitly.
Test Plan: Viewed new log UI in Harbormaster, clicked "^" icon and text, got the same (correct) behavior on both.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13130
Differential Revision: https://secure.phabricator.com/D19410
Summary:
Depends on D19377. Ref T13125. Ref T13124. Ref T13105. Coverage reporting in Diffusion didn't initially survive the transition to Document Engine; restore it.
This adds some tentative/theoretical support for multiple columns of coverage, but no way to actually produce them in the UI. For now, the labels, codes, and colors are hard coded.
Test Plan:
Added coverage with `diffusion.updatecoverage`, saw coverage in the UI:
{F5525542}
Hovered over coverage, got labels and highlighting.
Double-checked labels for "N" (Not Executable) and "U" (Uncovered). See PHI577.
Faked some multi-column coverage, but you can't currently get this yourself today:
{F5525544}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13125, T13124, T13105
Differential Revision: https://secure.phabricator.com/D19378
Summary: Ref T13105. After moving Diffusion to DocumnentEngine, this no longer has callers. It will become part of the document behavior.
Test Plan: Grepped for calls to the `diffusion-browse-file` behavior, found none.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19377
Summary:
Depends on D19349. Ref T13105. This was the behavior in Diffusion before with a little hard-coded snippet.
Remove that snippet ("diffusion-jump-to") and add a more general-purpose snippet to SourceView.
This is a tiny bit hacky still (and probably doesn't work quite right with Quicksand) but gets things working again and works in all of Files, Paste, and Diffusion.
Test Plan: Followed links to particular lines in Paste, Files and Diffusion; got scrolled to the right place.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19350
Summary:
Depends on D19313. Ref T13105. Fixes T13015. We lost the coloration for ages in the switch to Document Engine.
Restore it, and use a wider range of colors to make the information more clear.
Test Plan: Viewed some blame, saw a nice explosion of bright colors. This is a cornerstone of good design.
Maniphest Tasks: T13105, T13015
Differential Revision: https://secure.phabricator.com/D19314
Summary:
Depends on D19312. Ref T13105. For readability, render only one link for each contiguous block of changes.
Also make the actual rendering logic a little more defensible.
Test Plan: Viewed some files with blame, saw one render per chunk instead of one per line.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19313
Summary: Depends on D19311. Ref T13105. Currently, blame only renders on the initial request. Instead, redraw blame after swapping views.
Test Plan: Swapped from "Source -> Hexdump -> Source" and "Hexdump -> Source". Saw blame on source in all cases.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19312
Summary: Ref T13105. This needs refinement but blame sort of works again, now.
Test Plan: Viewed files in Diffusion and Files; saw blame in Diffusion when viewing in source mode.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19309
Summary: Ref T13105. Ref T13047. This makes symbol indexes work with DocumentEngine in Files, and restores support in Diffusion.
Test Plan: Command-clicked stuff, got taken to the symbol index with reasonable metadata in Diffusion, Differential and Files.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105, T13047
Differential Revision: https://secure.phabricator.com/D19307
Summary: Depends on D19273. Ref T13105. Adds "Change Text Encoding..." and "Highlight As..." options when rendering documents, and makes an effort to automatically detect and handle text encoding.
Test Plan:
- Uploaded a Shift-JIS file, saw it auto-detect as Shift-JIS.
- Converted files between encodings.
- Highlighted various things as "Rainbow", etc.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19274
Summary:
Depends on D19258. Ref T13105.
- When the default renderer is an Ajax renderer, don't replace the URI. For example, when viewing a Jupyter notebook, the URI should remain `/F123`, not instantly change to `/view/123/jupyter/`.
- Fix an issue where non-ajax renderers could fail to display the dropdown menu properly.
Test Plan:
- Viewed a Jupyter notebook, stayed on the same URI.
- Changed rendering, got different URIs.
- Viewed a JSON file and toggled renderers via dropdown.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19259
Summary:
Ref T13105. This adds various small client-side improvements to document rendering.
- In the menu, show which renderer is in use.
- Make linking to lines work.
- Make URIs persist information about which rendering engine is in use.
- Improve the UI feedback for transitions between document types.
- Load slower documents asynchronously by default.
- Discard irrelevant requests if you spam the view menu.
Test Plan: Loaded files, linked to lines, swapped between modes, copy/pasted URLs.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19256
Summary:
Depends on D19238. Ref T13105. Give document engines some reasonable automatic support for degrading gracefully when someone tries to hexdump a 100MB file or similar.
Also, make "Video" sort above "Audio" for files which could be rendered either way.
Test Plan: Viewed audio, video, image, and other files. Adjusted limits and saw full, partial, and fallback/error rendering.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19239
Summary: Depends on D19237. Ref T13105. This adds a (very basic) "Hexdump" engine (mostly just to have a second option to switch to) and a selector for choosing view modes.
Test Plan: Viewed some files, switched between audio/video/image/hexdump.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19238
Summary:
See <https://discourse.phabricator-community.org/t/desktop-only-notifications-mode-is-broken/1234>. Ref T13102. The "Desktop Only" mode for notifications currently shows both desktop and web notifications.
In fact, `JX.Notification` currently has no ability to render notifications as desktop-only. Make this work.
Note that many of the variables and parameters here, including `showAnyNotification`, `web_ready`, and `desktop_ready`, are named in an incorrect or misleading way. However, the new behavior appears to be correct.
Test Plan:
- Emitted test notifications in "No Notifications", "Web Only", "Web and Desktop", and "Desktop" modes.
- Saw appropriate notifications appear in the UI.
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19233
Summary:
Ref T13102. An install has a custom rule for bridging JIRA references via Doorkeeper and would like to be able to render them as `JIRA-123` instead of `JIRA JIRA-123 Full JIRA title`.
I think it's reasonable to imagine future support upstream for `JIRA-123`, `{JIRA-123}`, and so on, although we do not support these today. We can take a small step toward eventual support by letting the rendering pipeline understand different view modes.
This adds an optional `name` (the default text rendered before we do the OAuth sync) and an optional `view`, which can be `short` or `full`.
Test Plan:
I tested this primarily with Asana, since it's less of a pain to set up than JIRA. The logic should be similar, hopefully.
I changed `DoorkeeperAsanaRemarkupRule` to specify `name` and `view`, e.g `'view' => (mt_rand(0, 1) ? 'short' : 'full')`. Then I made a bunch of Asana references in a comment and saw them randomly go short or long.
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19215
Summary: Depends on D19190. Fixes T12590. Ref T13099. Replaces the barely-usable, gigantic, poorly ordered "<select />" control with a tokenizer. Attempts to fix various minor issues.
Test Plan:
- Edited paths: include/exclude paths, from different repositories, different actual paths.
- Used "Add New Path" to add rows, got repository selector prepopulated with last value.
- Used "remove".
- Used validation typeahead, got reasonable behaviors?
The error behavior if you delete the repository for a path is a little sketchy still, but roughly okay.
Maniphest Tasks: T13099, T12590
Differential Revision: https://secure.phabricator.com/D19191
Summary: Ref T12590. This is ancient code which was used to prefill `/trunk/tfb/www/` or similar at Facebook. I don't think it ever had a UI and no install has asked for this feature since 2011.
Test Plan: Grepped for affected symbols, edited paths in Owners.
Maniphest Tasks: T12590
Differential Revision: https://secure.phabricator.com/D19189
Summary:
Depends on D19183. Ref T11015. Currently, adding a trailing slash works great and omitting it mysteriously doesn't work.
Store a normalized version with an unconditional trailing slash for the lookup logic to operate on, and a separate display version which tracks what the user actually typed.
Test Plan:
- Entered "/src/main.c", "/src/main.c/", saw them de-duplicate.
- Entered "/src/main.c", saw it stay that way in the UI but appear as "/src/main.c/" internally.
- Added a rule for "/src/applications/owners" (no slash), created a revision touching paths in that directory, saw Owners fire for it.
- Changed the display value of a path only ("/src/main.c" to "/src/main.c/"), saw the update reflected in the UI without any beahvioral change.
Maniphest Tasks: T11015
Differential Revision: https://secure.phabricator.com/D19184
Summary:
Depends on D19166. Ref T13088. When the user scrolls away from a followed log, break the focus lock.
Let users stop following a live log.
Show when lines are added more clearly.
Don't refresh quite as quickly give users a better shot at clicking the stop button.
These behaviors can probably be refined but are at least more plausible and less actively user-hostile than the first version of this behavior was.
Test Plan: Used `write-log --rate` to write a large log slowly. Clicked "Follow Log", followed for a bit. Scrolled away, still got live updates but no more scroll lock. Clicked stop, no more updates.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19167
Summary:
Depends on D19162. Ref T13088. When a user links to `$1234`, we need to render a default view of the log with a piece at the head, a piece at the end, and a piece in the middle.
We also need to figure out the offset for line 1234, or multiple offsets for "1234-2345".
Since the logic views/reads mostly anticipated this it isn't too much of a mess, although there are a couple of bugs this exposes with view specifications that use combinations of parameters which were previously impossible.
Test Plan: Viewed a large log with no line marker. Viewed `$1`. Viewed `$end`. Viewed `$35-40`, etc. Expanded context around logs.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19163
Summary: Depends on D19152. Ref T13088. This adds live log tailing. It is probably not the final version of this feature because it prevents escape once you begin tailing a log.
Test Plan: Used `bin/harbormaster write-log --rate ...` to write a log slowly. Viewed it in the web UI. Clicked "Follow Log". Followed the log until the write finished, a lifetime later.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19153
Summary:
Depends on D19141. Ref T13088. Some of the fundamental log behaviors like "loading the correct rows" are now a bit better behaved.
The UI is a little less garbage, too.
Test Plan: Viewed some logs and loaded more context by clicking the buttons.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19142
Summary: Depends on D19139. Ref T13088. This doesn't actually work, but is close enough that a skilled attacker might be able to briefly deceive a small child.
Test Plan:
- Viewed some very small logs under very controlled conditions, saw content.
- Larger logs vaguely do something resembling working correctly.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19141
Summary: Fixes T13080. The banner wasn't properly included in the sleep/wake logic.
Test Plan:
Mentioned `Dxxx` on a task. Enabled persistent chat to activate Quicksand. Reloaded page. Clicked `Dxxx`. Scrolled down until a changeset header appeared. Pressed back button.
- Before patch: ended up on task, with header still around.
- After patch: ended up on task, with header properly vanquished.
Pressed "forward", ended up back on the revision with the header again.
Maniphest Tasks: T13080
Differential Revision: https://secure.phabricator.com/D19086
Summary: See PHI356. Adds inline comment and done counts to the filetree. Also makes the filetree wider by default.
Test Plan: Fiddled with filetrees in different browsers on different revisions. Added inlines, marked them done/undone.
Differential Revision: https://secure.phabricator.com/D19041
Summary:
Depends on D18939. Ref T13047. Symbol lookup can be activated from a diff (in Differential or Diffusion) or from the static view of a file at a particular commit.
In the latter case, we need to figure out the path a little differently. The character and line number approaches still work as written.
Test Plan:
- Command-clicked symbols in the Diffusion browse view with blame on and off; saw path, line and char populate properly.
- Command-clicked symbols in Differential diff view to check I didn't break anything.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13047
Differential Revision: https://secure.phabricator.com/D18940
Summary: Depends on D18937. Ref T13047. When available, provide character positions so external indexers can return more accurate results.
Test Plan: Clicked symbols in Safari, Firefox and Chrome, got sensible-looking character positions.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13047
Differential Revision: https://secure.phabricator.com/D18939
Summary:
Ref T13047. In some reasonable cases, knowing the path and line number where a symbol appears is useful in ranking or filtering the set of matching symbols.
Giving symbol sources more information can't hurt, and it's generally free for us to include this context since we just need to grab it out of the document and pass it along.
We can't always get this data (for example, if a user types `s idx` into global search, we have no clue) but this is similar to other types of context which are only available sometimes (like which repository a symbol appears in).
Test Plan: Command-clicked some symbols in 1-up (unified) and 2-up (side-by-side) diff views with symbol indexes configured. Got accurate path and line information in the URI I was redirected to.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13047
Differential Revision: https://secure.phabricator.com/D18936
Summary:
See PHI173. Currently, Herald has an "Assign to" action for tasks, and you can specify custom fields with datasource values (like users or projects) that have a limit (like 1 "Owner", or 12 "Jury Members").
Herald doesn't support these limits right now, so you can write `[ Assign to ][ X, Y, Z ]`. This just means "Assign to X", but make it more clear by actually enforcing the limit in the UI.
Test Plan:
- Created a "projects" custom field with limit 1.
- Tried to create actions that 'assign to' or 'set custom field to' more than one thing, got helpfully rebuffed by the UI.
- Created an "add subscribers" action with more than one value.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18887
Summary:
Depends on D18862. See PHI173. Ref T13025. Fixes T10005. This redefines bulk edits in terms of EditEngine fields, rather than hard-coding the whole thing.
Only text fields -- and, specifically, only the "Title" field -- are supported after this change. Followup changes will add more bulk edit parameter types and broader field support.
However, the title field now works without any Maniphest-specific code, outside of the small amount of binding code in the `ManiphestBulkEditor` subclass.
Test Plan: Used the bulk edit workflow to change the titles of tasks.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T10005
Differential Revision: https://secure.phabricator.com/D18863
Summary:
Depends on D18805. Ref T13025. Fixes T10268.
Instead of using a list of IDs for the bulk editor, power it with SearchEngine queries. This gives us the full power of SearchEngine and lets us use a query key instead of a list of 20,000 IDs to avoid issues with URL lengths.
Also, split it into a base `BulkEngine` and per-application subclasses. This moves us toward T10005 and universal support for bulk operations.
Also:
- Renames most of "batch" to "bulk": we're curently inconsitent about this, I like "bulk" better since I think it's more clear if you don't regularly interact with `.bat` files, and newer stuff mostly uses "bulk".
- When objects in the result set can't be edited because you don't have permission, show the status more clearly.
This probably breaks some stuff a bit since I refactored so heavily, but it seems mostly OK from poking around. I'll clean up anything I missed in followups to deal with remaining items on T13025.
Test Plan:
{F5302300}
- Bulk edited from Maniphest.
- Bulk edited from a workboard (no more giant `?ids=....` in the URL).
- Hit most of the error conditions, I think?
- Clicked the "Cancel" button.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T10268
Differential Revision: https://secure.phabricator.com/D18806
Summary:
See PHI242. All use cases for this that I know of are pretty hacky, but they don't seem perilous, and it's easier than webhooks.
See P1895, T10183, and T9853 for me previously refusing to implement this since all those use cases were also pretty bad.
Test Plan:
- Wrote a rule to add comments, saw it add comments.
- Reviewed summary, re-edited rule, reviewed transcript to check that all the strings worked OK.
- Wrote a new rule for a non-commentable object (a blog) to make sure I wasn't offered the "Add a comment" action.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18823
Summary:
See PHI180. Currently, if you begin creating or editing an inline and then swap display modes (for example, with "View Unified"), your edit is lost.
Persisting the editor state is complicated and this is very rare, so just prevent the action and warn the user instead.
Also make the warning persist for a little longer since a few of the messages, including this one, take a couple seconds to read now.
Test Plan:
- Edited a comment, tried to swap display modes, got a warning.
- Swapped display modes normally with no comment being edited.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18774
Summary:
See PHI185. When looking at a revision, you can Command-Click (Mac) symbols to jump to their definitions (provided the symbol index has been built).
Currently, the code works on any node inside the changeset list, so it activates when clicking links inside inline comments and opening them in a new window.
To avoid this, don't activate if we're inside an inline comment. This technically prevents you from doing a symbol lookup on a symbol inside a codeblock inside an inline, but that seems fine/reasonable.
Test Plan: Wrote `Dxxx` in an inline, command-clicked it. Before: got a symbol lookup. After: just a new tab with the revision.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18753
Summary: Noticed a couple of typos in the docs, and then things got out of hand.
Test Plan:
- Stared at the words until my eyes watered and the letters began to swim on the screen.
- Consulted a dictionary.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18693
Summary:
Fixes T12979. In D18457, we added a "No Notifications" setting to let users disable the blue and yellow pop-up notifications that alert you when an object has been updated, since some users found them distracting.
However, the change made "do nothing" the default, so all other `JX.Notification` callsites -- which never pass a preference -- were effectively turned off no matter what your setting was set to. This includes the "Read-Only" mode warning (grey), the "High Security" mode warning (purple), the "timezone" warning, and a few others.
Tweak things a little bit so the setting applies to ONLY blue and yellow ("object you're following was updated" / "this object was updated") notifications, not other types of popup notifications.
Test Plan:
- With notifications on in settings, got blue notifications and "Read-only".
- With notifications off in settings, got "Read-only" but no blue notifications.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12979
Differential Revision: https://secure.phabricator.com/D18600
Summary:
Ref T12970. See PHI43. Currently, the "Show Older Comments" link gets auto-clicked if the user visits **any** anchor. This is not correct.
Instead, only auto-click it if the user visits a numeric anchor. This fixes the behavior approximately 98% of the time. See T12970 for a followup on the remaining ambiguous cases.
Test Plan:
- Viewed a revision with some folded transactions and a "Show Older Comments" link.
- Clicked a link to a file in the table of contents, with a hash like `#1234abcd`.
- Before: Timeline expanded and I ended up somewhere bad.
- After: Timeline no longer expanded.
- Manually changed hash to `#1234` (purely numeric), saw timeline expand.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12970
Differential Revision: https://secure.phabricator.com/D18458
Summary: Fixes T12792. Expands the Notifications to "web, desktop, both, or none" for real-time notifications in settings.
Test Plan: Test with "test notifications" button, and while logged into two accounts with each of the 4 settings.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Maniphest Tasks: T12792
Differential Revision: https://secure.phabricator.com/D18457
Summary: Ref T12733. In this case, the server returns no new `row`, but we would incorrectly try to bind to one.
Test Plan:
- Created a new comment.
- Edited it.
- Deleted all the text.
- Saved changes.
- Before: Header continues to show phantom "1 Unsubmitted Comment", browser error log reflects one error.
- After: Header reflects comment being deleted, error log is quiet.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18262
Summary:
Fixes T8909. Ref T12733.
UI attempts to follow the mock, but is a bit rough since PHUIXButtonView without text in this menu gets weird spacing, we don't have circular buttons yet, and PHUIXActionView without an icon also gets odd spacing.
Test Plan: {F5003125}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733, T8909
Differential Revision: https://secure.phabricator.com/D18128
Summary:
Ref T12733. When a revision has unsubmitted checkmarks:
- Color the banner yellow.
- Show them in the "X unsubmitted" count.
- Make the "X unsubmitted" button cycle between all drafts (written but unpublished comments) and "draft done" (checked but unsubmitted "Done" checkbox comments).
Test Plan:
- Checked a "Done" box, saw "1 unsubmitted" and yellow banner.
- Clicked "5 unsubmitted" repeatedly, saw it cycle through all unsubmitted comments and checkboxes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18127
Summary:
Ref T12733. This paves the way for a separate "hide" operation which completely hides things.
(I didn't extend this to the server side because that would require schema changes and the new "hide" state is client-only.)
Test Plan: Collapsed and expanded inlines, viewed tooltips.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18126
Summary:
Fixes T12806. Ref T12733.
- Don't count synthetic (lint) comments as anything.
- When you begin writing an inline then cancel it, don't count it as anything.
- When we would show "0 / X", just show "X".
Test Plan:
- Viewed a diff with synthetic comments, no button.
- Wrote, then cancelled an inline. No "X comments".
- Clicked / unlicked "Done", saw "X" -> "1 / X".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12806, T12733
Differential Revision: https://secure.phabricator.com/D18103
Summary: Updates to use the standard 13px size we use everywhere else, cleans up a few mobile/display bugs, adds a hover state for `tr`.
Test Plan:
Review Diffusion, Daemons, Almanac, People Logs, anything else?
{F4991070}
{F4991071}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18088
Summary: Ref M1476. Same as D18070 but that did most of the magic.
Test Plan: {F4987961}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18071
Summary: Ref T12779. Try a little harder to get the autoscroll heuristic right, but also just stick to anchors if the URL has an anchor and the scroll position is near that anchor.
Test Plan:
- Loaded an anchored diff at a bunch of window sizes, seemed pretty sticky.
- Added `usleep(100000 * mt_rand(1, 15))` to `ChangesetViewController` to make changesets load slowly and in random order, reloaded a bunch of times while scrolling around, things appeared reasonable.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12779
Differential Revision: https://secure.phabricator.com/D18060
Summary: Ref M1476. I'm going to see if I can set up side-by-side "PHUI" vs "PHUIX" to make maintaining them a touch easier. Before doing that, nuke some really old UI examples that don't seem very useful.
Test Plan: Viewed UIExamples, saw fewer bad ones.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18049
Summary: Ref T12733. This adds classes for unsubmitted/unsaved changes, and lays some groundwork for additional buttons.
Test Plan:
- Added, edited, deleted comments.
- Saw bar background color update appropriately.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18045
Summary: Ref T12733. This ultimately conflicts with scrolling and took about two days to get reported as a bug/regression. See T12733 for a bunch of additional discussion. See T1026 for original discussion.
Test Plan:
- Left single-line and multi-line comments on desktop.
- Tapped to leave single-line comments on mobile.
- Dragged lines on mobile, got a scroll instead of a range comment.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18044
Summary: Ref T12733. Completely removes the objectives UI.
Test Plan:
- Grepped for `objective`, etc.
- Browsed revisions, no JS errors / broken stuff.
- (If I missed anything, it's likely to turn up in followup changes.)
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18043
Summary:
Fixes T12779. Currently, we scroll down if the midline of the changeset is above the midline of the viewport.
This rule can cause us to scroll improperly when loading changesets //after// jumping to their anchors, since the changeset we want to look at will likely have a midpoint above the document midline. That is, we follow an anchor to `X.c`, then it loads, then we scroll past it.
Instead, scroll only if the changeset is (almost) entirely above the viewport.
Test Plan:
Followed an anchor to `PHUIFeedStoryExample`:
{F4984154}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12779
Differential Revision: https://secure.phabricator.com/D18052
Summary: Grep for phui-tag-shade and verify we're no longer calling shade-color directly.
Test Plan: Search, workboard, story points, etc.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17993
Summary: Ref T12733. When an inline is selected, make it stand out so you can see where you are in the document more clearly.
Test Plan: {F4968509}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17982
Summary: Ref T12733. Show a "reply" icon for replies, and make them stack directly under their parent.
Test Plan: {F4968500}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17981
Summary: Ref T12733. Shows a comment snippet when hovering inlines in the objective list.
Test Plan: {F4968490}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17980
Summary: Ref T12733. Currently, creating a new inline and then canceling it leaves a marker in the objective list. Instead, remove the marker.
Test Plan:
- Created an empty inline, cancelled. Created a non-empty inline, cancelled. No objective marker in either case.
- Created a new normal inline, objective marker.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17979
Summary:
Ref T12733. When creating a new comment, the objective could appear to far up in the scrollbar because we were anchoring it to an invisible row.
Instead, anchor to the "edit" row while editing.
Test Plan: Created a new comment at the very top of a file, saw "File, Star" icons instead of "Star, File".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17978
Summary:
Ref T12733.
- While editing a comment, show a pink star ({icon star, color=pink}) with a tooltip.
- Slight UI tweaks, including draft comments getting an indigo pencil ({icon pencil, color=indigo}).
Test Plan: {F4968470}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17977
Summary: Ref T12733. Currently, long filenames get cut off at 160px. Instead, don't cut them off.
Test Plan:
Before:
{F4968401}
After:
{F4968402}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17975
Summary:
Ref T12733. In the longer run I'd like to just push this out from the edge, but that currently gets us into trouble since we start bumping into content. On my system, the trackpad scrollbar also expands in size when moused over, so the minimum number of pixels we need to push it out is approximatley 15px. This hits body content and the persistent chat.
For now, just disable this element on trackpad systems.
Test Plan:
Disconnected all USB peripherals, quit and relaunched Safari, saw no objective list.
Reconnected mouse, relaunched Safari, saw objective list.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17974
Summary: See D17955.
Test Plan: Loaded a revision, no longer saw annotations with prototypes off. Still saw annotations with prototypes on.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17983
Summary:
Ref T12733. Currently, we detect the changeset which is in the middle of the screen as the current changeset.
This doesn't always get us the most intuitive changeset, particularly after a navigation from the scroll objective list: when you jump to changeset "X", you'd tend to expect "X" to be shown in the header, but the //next// changeset may be shown if "X" is too short.
Instead, select the changeset near the top of the screen (spanning an invisible line slightly below the banner).
Test Plan: Scrolled and jumped through a document with long and short changesets, saw a more intuitive changeset selected by the banner.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17976
Summary:
Minor UI tweaks:
- Use the dynamic icon for each file (e.g., image, text), not a hard-coded icon.
- Render the path (less important) in grey and the filename (more important) in black.
Test Plan: {F4966176}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17957
Summary:
Add important objectives (like waygates and quest markers) to the minimap.
This also probably fixes @cspeckmim's bug with the {key @} keyboard shortcut.
Test Plan:
(This is probably easier to undestand if you `arc patch` + click around.)
{F4966037}
Reviewers: chad, amckinley
Reviewed By: chad
Subscribers: cspeckmim
Differential Revision: https://secure.phabricator.com/D17955
Summary:
Fixes T1591. This was removed long ago because it was a mess to implement and caused a bunch of weird issues, and also my tolerance for dealing with weird JS issues was much, much lower.
I have now survived the fires of JX.Scrollbar and would love to address 200 small nitpicks about obscure browser behaviors on Linux, so open the floodgates again.
A secondary goal here is to create room to add a global view state menu on the right, with 300 options like "hide all inlines", "hide done inlines", "hide collapsed inlines", "hide ghosts", "show ghosts", "enable filetree", "disable filetree", etc, etc. Not sure how much of this I'll actually do. I have one more experiment I want to try first.
Test Plan: {F4963294}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T1591
Differential Revision: https://secure.phabricator.com/D17945
Summary:
Ref T12616. This puts "h" back to collapse or expand the current file.
This removes some very complicated/messy code around following links in the table of contents and getting files auto-expanded. I suspect no one will miss this, but we can restore it if ayone notices.
Test Plan: Pressed "h" to collapse/expand a file. Also used the menu items.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17940
Summary:
Fixes T10563. If you have a thread like this:
```
> A
> B
> C
```
...and you reply to "B", we should put the new inline below "B".
We currently do when you reload the page, but the initial edit goes at the bottom always (below "C").
Test Plan: {F4963015}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10563
Differential Revision: https://secure.phabricator.com/D17938
Summary:
Ref T12616. When you "Delete" a comment from the preview, we try to delete the comment on screen too.
It may or may not be present on screen: if you just added it it's usually visible. However, you might also have hidden the file it contains or it could be on an older diff in a file which is no longer present in the current diff.
After updates in T12616, we could only find the comment if you'd previously interacted with it for some reason. Update this code to be able to find all inlines present in the document.
Test Plan:
- Write a draft comment.
- Reload the page.
- DO NOT INTERACT WITH THE COMMENT!
- Delete it from the preview.
- After patch: Comment is deleted from the document, too.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17937
Summary:
Fixes T11662. In the very obscure situation described in that task, quiet a JS console warning.
The actual edit operation appears to work correctly after changes elsewhere.
There aren't really any legitimate lines for us to highlight in this case so I'm just giving up rather than trying to do something approximate.
Test Plan:
- Wrote `long.txt`.
- Created revision.
- Added an inline near the bottom.
- Removed most of `long.txt`.
- Updated revsion.
- Replied to the ghost inline.
- Edited the reply to the ghost inline, worked.
- Hovered the reply to the ghost inline: no line highlight, but no errors.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11662
Differential Revision: https://secure.phabricator.com/D17930
Summary: Fixes T1026. Ref T12616. Allows drag-to-select on devices to add inlines on a range of lines, using dark magic that I copy/pasted from StackOverflow.
Test Plan: Left a comment on a range of lines on iPhone simulator.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616, T1026
Differential Revision: https://secure.phabricator.com/D17928
Summary: Ref T12616. This makes line range selection use the new code, and removes the remainder of the old "hover a line number" / "select a line range" code.
Test Plan: Hovered line numbers; selected line ranges.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17927
Summary:
Ref T11401. Fixes T5232. Ref T12616.
Partly, this moves more code over to the new stuff.
This also allows "r" to work if you have code selected (not just comments). If you "reply" to code, you start a new comment.
You can "R" a comment to quote it. This just starts a new comment normally if you "R" a block of code. This is sort of a power-user version of "quote" since it seems like it probably doesn't really make sense to put it in the UI ever (maybe).
With the new click-to-select, you can click + "R" to reply-with-quote.
Test Plan: Used "r" and "R" to reply to comments and code.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616, T11401, T5232
Differential Revision: https://secure.phabricator.com/D17920
Summary:
Fixes T8047. Ref T12616. Fixes T9270. This moves the "hover" part of the hover/drag behavior to the new code, leaving the "drag" part for a followup change.
The new hover UI behaves properly with Quicksand (T8047) and the filetree (T9270).
Test Plan: Hovered over inlines, saw lines select properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616, T9270, T8047
Differential Revision: https://secure.phabricator.com/D17919
Summary: Ref T12616. The ability to do {nav Edit > Cancel > Undo} to get your text back on inlines got dropped during the conversion. Restore it.
Test Plan:
Created, replied, and edited inlines, typed text, then cancelled. Was able to undo.
Also undid normal deletion.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17916
Summary:
Fixes T11784. A lot of things are interacting here, but this probably gets slightly better results slightly more often?
Basically:
- When we load content, we try to keep the viewport "stable" on the page, so the page doesn't jump around like crazy.
- If you're near the top or bottom of the page, we try to stick to the top (e.g., reading the summary) or bottom (e.g., writing a comment).
- But, if you followed an anchor to a comment that's close to the bottom of the page, we might stick to the bottom intead of staying with the anchor.
Kind of do a better job by not sticking to the bottom if you have an anchor. This will get things wrong if you follow an anchor, scroll down, start writing a comment, etc. But this whole thing is a pile of guesses anyway.
Test Plan:
- Followed an anchor, saw non-sticky stabilization.
- Loaded the page normally, scrolled to the bottom real fast, saw sticky stabilization.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11784
Differential Revision: https://secure.phabricator.com/D17911
Summary:
Ref T12616. Fixes T12715. I suspect these are very rarely used. (I think you tried to get rid of them before but I pushed back since we couldn't really offer great alternatives at the time?)
Now that the code is in a better place:
- Click an inline's header (just the colored part) to select it with the keyboard selection cursor.
- Click again to deselect it.
- You can use "n" and "p" to jump to comments, so "click + n" is the same as the old "V" action.
- This also makes it easier to swap between keyboard and mouse workflows, since you can jump into things with the keyboard at any inline.
Also, make "Reply" render more consistently.
Test Plan:
- Did all that stuff, things seemed to work OK.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12715, T12616
Differential Revision: https://secure.phabricator.com/D17908
Summary:
Fixes T8130. Allows selected comments to be shown/hidden (with "q") or marked done/not-done (with "w").
(These key selections are because "qwer" are right next to each other on QWERTY keyboards, and now mean "hide, done, edit, reply".)
Also, allow "N" and "P" to do next/previous inline, including hidden inlines. This makes "q" to hide/show a little more powerful and a little easier to undo.
Test Plan: Used "q", "w", "N" and "P" to navigate and interact with comments.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8130
Differential Revision: https://secure.phabricator.com/D17906
Summary:
Ref T12634. Fixes T8131. Currently, most edit operations (edit, reply, collapse, mark done) lose the keyboard cursor state.
Instead, bind the state more tighlty to the inline object itself (instead of the rows which happen to be in the document), and then do a bit of recalculation to try to keep it selected across edits.
Test Plan:
- Used "n" to select an inline.
- Clicked "Done" checkbox.
- Pressed "n".
- Went to the next inline (previously: lost position in document).
- Behavior is also better for: edit, reply, collapse/expand.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12634, T8131
Differential Revision: https://secure.phabricator.com/D17905
Summary:
Ref T12634. Fixes T12633. These events allow the keyboard reticle to resize properly.
(I expect to possibly hide/disable the reticle in the future during edits, but at least make the behavior sensible for now.)
Test Plan:
- Used "n" to select a block.
- Clicked a line number in that block to start a new inline comment.
- Saw reticle resize properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12634, T12633
Differential Revision: https://secure.phabricator.com/D17904
Summary: Ref T12634. Fixes T10049. Toggling an inline currently leaves the reticle oddly-positioned.
Test Plan:
- Selected a comment with the keyboard.
- Collapsed it.
- Saw reticle behave reasonably.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12634, T10049
Differential Revision: https://secure.phabricator.com/D17903
Summary: Fixes T12632. Ref T12634. Currently, the keyboard focus reticle does not redraw properly after a window resize.
Test Plan:
- Used "n" to select a block.
- Resized the window.
- Saw the reticle also resize properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12634, T12632
Differential Revision: https://secure.phabricator.com/D17901
Summary: Ref T8047. Ref T12634. When we sleep, hide the reticle. Restore it when we wake.
Test Plan:
- With Quicksand enabled..
- Used "j" to select a change in a revision.
- Navigated away by clicking a link.
- WOW! Reticle vanished properly!
- Used "back" to return.
- Reticle returned properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12634, T8047
Differential Revision: https://secure.phabricator.com/D17900
Summary:
Ref T12634. Using keyboard shortcuts in Differential currently relies on focus behavior in `KeyboardShortcutManager`.
This possibly made sense long ago, but no longer does, and leads to a whole slew of bugs where the reticle doesn't interact properly with anything else.
Move it to Differential so it can be made reasonably aware of edit operations, Quicksand navigation, etc.
This just moves the code; future diffs will actually fix bugs.
Test Plan: Used "n", "j", etc., saw the same behavior as before.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12634
Differential Revision: https://secure.phabricator.com/D17899
Summary: Ref T12616. This makes "edit" and "reply" work again.
Test Plan:
Used "e" and "r" to edit and reply.
Also used them in bogus ways and got useful UI feedback.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17895
Summary: Ref T12616. This moves most keyboard shortcuts into DiffChangesetList. It breaks some shortcuts that I plan to restore later, noted in T12616 (toggle file, edit inline, reply to inline), since I think ripping them out now and rebuilding them in a little bit will make things much simpler.
Test Plan:
- Used j, k, n, p, J, K shortcuts to navigate a revision.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17859
Summary:
Ref T12616. This moves "reply" to the new stuff and deletes DifferentialInlineEditor, which no longer does anything.
(This breaks some keyboard shortcuts, but I'll rebase D17859 shortly.)
Test Plan: Replied to inlines; things seemed to work properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17894
Summary:
Ref T12616. This makes creating inlines use the new code.
Creation and editing is now slightly more consistent in how it uses nodes. This will simplify the next change (replies), which I ran into some trouble with in an earlier iteration.
Note that this (and other changes in the series) allow you to create and edit multiple inlines simultaneously. This is mostly a feature, although I expect we'll need to lock it down a little bit. I have some UI ideas to help avoid errors.
Test Plan: Created inlines on a single line; on a range of lines; on the same line; multiple inlines at the same time.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17893
Summary:
Ref T12616. This moves the delete actions to the new, more stateful way of doing things.
These are a little tricky because you can click "Delete" on an inline, but you can also click "Delete" from the preview area at the bottom of the page. If you do, the inline you are deleting may or may not be present on the page.
This has a few bugs -- notably, deleting from the preview without interacting with the on-page inline first won't actually delete the on-page inline yet -- but nothing too serious.
Test Plan: Deleted inlines, undid deletion, deleted from preview.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17890
Summary:
Ref T12616. This updates clicking the "Done" checkbox for the new stuff.
This one is pretty clean since the "Done" checkbox doesn't do too much weird magic.
Test Plan: Clicked the box a few times.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17888
Summary:
Ref T12616. This doesn't pull over everything (some UI feedback didn't make it yet, and you can't cancel + undo cancelling edits yet) but editing comments technically works.
This is a little shaky, but feels less shaky than every other approach I've tried, so I think I'm finally on a reasonable track here.
Test Plan: Edited some inline comments.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17887
Summary:
Ref T12616. Fixes T12153. Currently, when you hide inlines, they hide completely and turn into a little bubble on the previous line.
Instead, collapse them to a single line one-by-one. Narrowly, this fixes T12153.
In the future, I plan to make these changes so this feature makes more sense:
- Introduce global "hide everything" states (T8909) so you can completely hide stuff if you want, and this represents more of a halfway state between "nuke it" and "view it".
- Make the actual rendering better, so it says "epriestley: blah blah..." instead of just "..." -- and looks less dumb.
The real goal here is to introduce `DiffInline` and continue moving stuff from the tangled jungle of a million top-level behaviors to sensible smooth statefulness.
Test Plan:
- Hid and revealed inlines in unified and two-up modes.
- These look pretty junk for now:
{F4948659}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616, T12153
Differential Revision: https://secure.phabricator.com/D17861
Summary: Ref T12616. This cements the relationship between ChangesetList (parent container) and Changeset (child) and passes translations down so Changeset can use them to translate the text "Loading..."
Test Plan: Viewed loading changes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17846
Summary: Ref T12616. This ends up being a little messy ("one giant function") and maybe I'll clean it up a bit later, but continue consolidating the wild jungle of behaviors into a smaller set of responsible objects.
Test Plan: Clicked all the menu options, saw them work properly. Grepped for removed methods.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17845
Summary:
Ref T12616. Diffusion, only, has a "Show All Context" button which expands the full context on all changes.
I don't remember the exact history on this, but it hasn't existed in Differential for some time and no one has complained. I suspect that the "View Options > Show All Context" on each file may replace it. I can't really come up with good reasons to use it, offhand. If we want to restore it, I think global options after T1591 is promising.
{F4945561}
Test Plan:
- Loaded a commit in Diffusion, no longer saw a button.
- Grepped for relevant sigils.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17843
Summary: Ref T12616. This class is already mostly-reasonable as a representation of an individual changeset, so I plan to just adjust it a little bit.
Test Plan:
- Used `git grep` to search for `ChangesetViewManager`.
- Used `git grep` to search for `changeset-view-manager`.
- Browsed around and interacted with changesets.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17842
Summary: Ref T12616. Put these listeners in DiffChangesetList so the wake/sleep properly for Quicksand.
Test Plan:
- Added some logging.
- With quicksand, moved between diffs.
- Saw "load" and "show more" fire exactly once on each page, with the correct changeset list listener.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17841
Summary:
Ref T12616. Ref T8047. Ref T11093. We currently have several bugs where diff state sticks across Quicksand pages.
Add a new top-level object to handle this, with `sleep()` and `wake()` methods. In `sleep()`, future changes will remove/deacivate all the reticles/editors/etc.
See T12616 for high-level discussion of plans here.
This general idea is likely to become more formal eventually (e.g. for "sheets" or whatever we call them, in T10469) but I think this is probably a reasonable place to draw a line for now.
Test Plan:
- Added some logging to sleep(), wake() and construct().
- Viewed changes in Differential.
- With Quicksand on, browsed around; saw state change logs fire properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616, T11093, T8047
Differential Revision: https://secure.phabricator.com/D17840
Summary: Moves Conpherence to use EditEngine. This removes the "First Message" field, but I think that's ok until we have direct messaging of some sort, then maybe have built-ins cover that case.
Test Plan:
- Visit /new/ and /edit/ for creating new rooms.
- Edit a room in full conpherence
- Edit a room in durable column
- grep for METADATA calls
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11729
Differential Revision: https://secure.phabricator.com/D16677
Summary: This adds some basic per user / per room theming for Conpherence, which should hopefully let users identify rooms from just the sidebar color.
Test Plan: Lots of threads with different colors.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17747
Summary:
Ref T12562. I think the pre-send-on-enter behavior was: disable textarea, send message, clear area on response?
That got changed but not completely, maybe. There's currently an issue here:
- Add a `sleep(3)` to `UpdateController`.
- Type "AAA".
- Press enter.
- Real fast, type "BBB".
- When the "AAA" arrives, your "BBB" is lost. Sad!
Test Plan:
- Did the thing described above; no longer lost "BBB".
- Switched threads, sent messages, couldn't find anything else this breaks. It dates from a long time ago so I think it's just pre-SOE stuff.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12562
Differential Revision: https://secure.phabricator.com/D17742
Summary:
Fixes T12599. If you're faster than the network request, we don't actually resolve your query when the data arrives.
Instead, when the data shows up, run the query if the user has typed something.
Test Plan: Pasted a filename in real fast, got results. (Previously: no results until you press something else.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12599
Differential Revision: https://secure.phabricator.com/D17739
Summary:
Ref T12566. Ref T12563. This fixes three bugs with Aphlict replay stuff:
First, Conphernece would try to repaint the UI even if no thread was open. Only repaint when a thread is open.
Second, although we deduplicate JX.Leader messages, we didn't deduplicate actual notification messages. If you browsed the leader window, then it re-elected itelf as a leader and replayed history, it could rebroadcast notifications and other windows could show doubles. Deduplicate notifications to prevent this.
Third, we always replayed the last 60 seconds of history. When you browsed the leader window, whichever window became the new leader (possibly the one you just browsed) could replay messages from before it had opened, leading to duplicate messages. Particularly, after receiving a message and then browsing you could see that message again. Instead, only replay history as far back as when the window first opened.
Test Plan:
- Clicked "Repaint" with a thread open, saw a repaint. Clicked "Repaint" with Conpherence open but no thread, no repaint and no 404 request to `/update/null/`.
- In browser A, opened three windows. In browser B, sent a notification. In browser A, browsed the leader window away twice in a row. Observed that the window which never became a leader doesn't duplicate notifications.
- In browser A, opened three windows. In browser B, sent a notification. In browser A, browsed the leader window away over and over again. Observed that replay requests issued with appropriate history windows.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12566, T12563
Differential Revision: https://secure.phabricator.com/D17722
Summary: Ref T12573. This sends a "ping" to the server, and a "pong" back to the client, every 15 seconds. This tricks ELBs into thinking we're doing something useful and productive.
Test Plan: Ran `bin/aphlict debug`, loaded Phabricator, saw ping/pong in logs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12573
Differential Revision: https://secure.phabricator.com/D17717
Summary: Ref T12566. When we reconnect, refresh the current thread even if we replayed notifications.
Test Plan:
- Clicked the "Repaint" button, saw the thread refresh.
- Clicked the "Reconnect" button, saw the thread reresh.
- Launched `aphlict debug`, killed it, restarted it, saw the thread refresh after reconnect.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12566
Differential Revision: https://secure.phabricator.com/D17713
Summary:
Fixes T12564. We already had some code which seems to deal with this properly, it just wasn't getting used.
Assign each application-level notification a unique ID, then ignore messages with duplicate IDs.
Test Plan:
- In browser A, loaded `/T123`.
- In browser B, loaded `/T123`.
- Made a comment as B.
- Saw notification as A.
- Mashed "Replay" a bunch.
- Before patch: piles of duplicate notifications.
- After patch: no duplicates.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12564
Differential Revision: https://secure.phabricator.com/D17710
Summary:
Fixes T12563. If we've ever seen an "open", mark all future connections as reconnects. When we reconnect, replay recent history.
(Until duplicate messages (T12564) are handled better this may cause some notification duplication.)
Also emit a reconnect event (for T12566) but don't use it yet.
Test Plan: {F4912044}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12563
Differential Revision: https://secure.phabricator.com/D17708
Summary: Ref T12568. Ref T12567. Allows you to force a reconnect, and shows the reconnect delay on connection close/failure.
Test Plan: {F4911879}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12568, T12567
Differential Revision: https://secure.phabricator.com/D17705
Summary: Ref T12568. This begins building toward a more useful realtime debugging console for Leader/Aphlict/general realtime stuff.
Test Plan: {F4911521}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12568
Differential Revision: https://secure.phabricator.com/D17701
