Summary:
Fixes T8130. Allows selected comments to be shown/hidden (with "q") or marked done/not-done (with "w").
(These key selections are because "qwer" are right next to each other on QWERTY keyboards, and now mean "hide, done, edit, reply".)
Also, allow "N" and "P" to do next/previous inline, including hidden inlines. This makes "q" to hide/show a little more powerful and a little easier to undo.
Test Plan: Used "q", "w", "N" and "P" to navigate and interact with comments.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8130
Differential Revision: https://secure.phabricator.com/D17906
Summary:
Ref T12634. Fixes T8131. Currently, most edit operations (edit, reply, collapse, mark done) lose the keyboard cursor state.
Instead, bind the state more tighlty to the inline object itself (instead of the rows which happen to be in the document), and then do a bit of recalculation to try to keep it selected across edits.
Test Plan:
- Used "n" to select an inline.
- Clicked "Done" checkbox.
- Pressed "n".
- Went to the next inline (previously: lost position in document).
- Behavior is also better for: edit, reply, collapse/expand.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12634, T8131
Differential Revision: https://secure.phabricator.com/D17905
Summary:
Ref T12634. Fixes T12633. These events allow the keyboard reticle to resize properly.
(I expect to possibly hide/disable the reticle in the future during edits, but at least make the behavior sensible for now.)
Test Plan:
- Used "n" to select a block.
- Clicked a line number in that block to start a new inline comment.
- Saw reticle resize properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12634, T12633
Differential Revision: https://secure.phabricator.com/D17904
Summary: Ref T12634. Fixes T10049. Toggling an inline currently leaves the reticle oddly-positioned.
Test Plan:
- Selected a comment with the keyboard.
- Collapsed it.
- Saw reticle behave reasonably.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12634, T10049
Differential Revision: https://secure.phabricator.com/D17903
Summary:
Ref T9270. Ref T12634. Emit a resize event after toggling the filetree so that things can recalculate layout.
This just does the keyboard reticle, not the mouse/edit reticle.
Test Plan:
- Used "n" to select a block.
- Used "f" to toggle the filetree.
- Saw reticle resize properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12634, T9270
Differential Revision: https://secure.phabricator.com/D17902
Summary: Fixes T12632. Ref T12634. Currently, the keyboard focus reticle does not redraw properly after a window resize.
Test Plan:
- Used "n" to select a block.
- Resized the window.
- Saw the reticle also resize properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12634, T12632
Differential Revision: https://secure.phabricator.com/D17901
Summary: Ref T8047. Ref T12634. When we sleep, hide the reticle. Restore it when we wake.
Test Plan:
- With Quicksand enabled..
- Used "j" to select a change in a revision.
- Navigated away by clicking a link.
- WOW! Reticle vanished properly!
- Used "back" to return.
- Reticle returned properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12634, T8047
Differential Revision: https://secure.phabricator.com/D17900
Summary:
Ref T12634. Using keyboard shortcuts in Differential currently relies on focus behavior in `KeyboardShortcutManager`.
This possibly made sense long ago, but no longer does, and leads to a whole slew of bugs where the reticle doesn't interact properly with anything else.
Move it to Differential so it can be made reasonably aware of edit operations, Quicksand navigation, etc.
This just moves the code; future diffs will actually fix bugs.
Test Plan: Used "n", "j", etc., saw the same behavior as before.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12634
Differential Revision: https://secure.phabricator.com/D17899
Summary: Ref T12616. This makes "edit" and "reply" work again.
Test Plan:
Used "e" and "r" to edit and reply.
Also used them in bogus ways and got useful UI feedback.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17895
Summary: Ref T12616. This moves most keyboard shortcuts into DiffChangesetList. It breaks some shortcuts that I plan to restore later, noted in T12616 (toggle file, edit inline, reply to inline), since I think ripping them out now and rebuilding them in a little bit will make things much simpler.
Test Plan:
- Used j, k, n, p, J, K shortcuts to navigate a revision.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17859
Summary:
Ref T12616. This moves "reply" to the new stuff and deletes DifferentialInlineEditor, which no longer does anything.
(This breaks some keyboard shortcuts, but I'll rebase D17859 shortly.)
Test Plan: Replied to inlines; things seemed to work properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17894
Summary:
Ref T12616. This makes creating inlines use the new code.
Creation and editing is now slightly more consistent in how it uses nodes. This will simplify the next change (replies), which I ran into some trouble with in an earlier iteration.
Note that this (and other changes in the series) allow you to create and edit multiple inlines simultaneously. This is mostly a feature, although I expect we'll need to lock it down a little bit. I have some UI ideas to help avoid errors.
Test Plan: Created inlines on a single line; on a range of lines; on the same line; multiple inlines at the same time.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17893
Summary:
Ref T12616. This moves the delete actions to the new, more stateful way of doing things.
These are a little tricky because you can click "Delete" on an inline, but you can also click "Delete" from the preview area at the bottom of the page. If you do, the inline you are deleting may or may not be present on the page.
This has a few bugs -- notably, deleting from the preview without interacting with the on-page inline first won't actually delete the on-page inline yet -- but nothing too serious.
Test Plan: Deleted inlines, undid deletion, deleted from preview.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17890
Summary:
Ref T12616. This updates clicking the "Done" checkbox for the new stuff.
This one is pretty clean since the "Done" checkbox doesn't do too much weird magic.
Test Plan: Clicked the box a few times.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17888
Summary:
Ref T12616. This doesn't pull over everything (some UI feedback didn't make it yet, and you can't cancel + undo cancelling edits yet) but editing comments technically works.
This is a little shaky, but feels less shaky than every other approach I've tried, so I think I'm finally on a reasonable track here.
Test Plan: Edited some inline comments.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17887
Summary:
Ref T12616. Fixes T12153. Currently, when you hide inlines, they hide completely and turn into a little bubble on the previous line.
Instead, collapse them to a single line one-by-one. Narrowly, this fixes T12153.
In the future, I plan to make these changes so this feature makes more sense:
- Introduce global "hide everything" states (T8909) so you can completely hide stuff if you want, and this represents more of a halfway state between "nuke it" and "view it".
- Make the actual rendering better, so it says "epriestley: blah blah..." instead of just "..." -- and looks less dumb.
The real goal here is to introduce `DiffInline` and continue moving stuff from the tangled jungle of a million top-level behaviors to sensible smooth statefulness.
Test Plan:
- Hid and revealed inlines in unified and two-up modes.
- These look pretty junk for now:
{F4948659}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616, T12153
Differential Revision: https://secure.phabricator.com/D17861
Summary: Ref T12616. This cements the relationship between ChangesetList (parent container) and Changeset (child) and passes translations down so Changeset can use them to translate the text "Loading..."
Test Plan: Viewed loading changes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17846
Summary: Ref T12616. This ends up being a little messy ("one giant function") and maybe I'll clean it up a bit later, but continue consolidating the wild jungle of behaviors into a smaller set of responsible objects.
Test Plan: Clicked all the menu options, saw them work properly. Grepped for removed methods.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17845
Summary:
Ref T12616. Diffusion, only, has a "Show All Context" button which expands the full context on all changes.
I don't remember the exact history on this, but it hasn't existed in Differential for some time and no one has complained. I suspect that the "View Options > Show All Context" on each file may replace it. I can't really come up with good reasons to use it, offhand. If we want to restore it, I think global options after T1591 is promising.
{F4945561}
Test Plan:
- Loaded a commit in Diffusion, no longer saw a button.
- Grepped for relevant sigils.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17843
Summary: Ref T12616. This class is already mostly-reasonable as a representation of an individual changeset, so I plan to just adjust it a little bit.
Test Plan:
- Used `git grep` to search for `ChangesetViewManager`.
- Used `git grep` to search for `changeset-view-manager`.
- Browsed around and interacted with changesets.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17842
Summary: Ref T12616. Put these listeners in DiffChangesetList so the wake/sleep properly for Quicksand.
Test Plan:
- Added some logging.
- With quicksand, moved between diffs.
- Saw "load" and "show more" fire exactly once on each page, with the correct changeset list listener.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17841
Summary:
Ref T12616. Ref T8047. Ref T11093. We currently have several bugs where diff state sticks across Quicksand pages.
Add a new top-level object to handle this, with `sleep()` and `wake()` methods. In `sleep()`, future changes will remove/deacivate all the reticles/editors/etc.
See T12616 for high-level discussion of plans here.
This general idea is likely to become more formal eventually (e.g. for "sheets" or whatever we call them, in T10469) but I think this is probably a reasonable place to draw a line for now.
Test Plan:
- Added some logging to sleep(), wake() and construct().
- Viewed changes in Differential.
- With Quicksand on, browsed around; saw state change logs fire properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616, T11093, T8047
Differential Revision: https://secure.phabricator.com/D17840
Summary: Moves Conpherence to use EditEngine. This removes the "First Message" field, but I think that's ok until we have direct messaging of some sort, then maybe have built-ins cover that case.
Test Plan:
- Visit /new/ and /edit/ for creating new rooms.
- Edit a room in full conpherence
- Edit a room in durable column
- grep for METADATA calls
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11729
Differential Revision: https://secure.phabricator.com/D16677
Summary:
Send-on-enter and autocomplete both listen for "return" keypresses, and could race. Have autocomplete let other handlers take a shot at the action before it does.
Also, fix a case where ":)" and the suffix list (which lets you type `someone is 100% to blame here (@epriestley)` and get the results you want) interacted badly, so ":)" cancels the autocompleter like ":3" does.
Test Plan:
- Typed "@xxx" and mashed return real fast over and over again while reloading the page. Before: sometimes handlers raced and text submitted. After: always handled by autocomplete behavior.
- Typed ":", ")", "<return>", sent an emoticon (previously: no).
Reviewers: chad, amckinley
Reviewed By: chad
Subscribers: xxx
Differential Revision: https://secure.phabricator.com/D17794
Summary: This adds some basic per user / per room theming for Conpherence, which should hopefully let users identify rooms from just the sidebar color.
Test Plan: Lots of threads with different colors.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17747
Summary:
Ref T12562. I think the pre-send-on-enter behavior was: disable textarea, send message, clear area on response?
That got changed but not completely, maybe. There's currently an issue here:
- Add a `sleep(3)` to `UpdateController`.
- Type "AAA".
- Press enter.
- Real fast, type "BBB".
- When the "AAA" arrives, your "BBB" is lost. Sad!
Test Plan:
- Did the thing described above; no longer lost "BBB".
- Switched threads, sent messages, couldn't find anything else this breaks. It dates from a long time ago so I think it's just pre-SOE stuff.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12562
Differential Revision: https://secure.phabricator.com/D17742
Summary:
Fixes T12599. If you're faster than the network request, we don't actually resolve your query when the data arrives.
Instead, when the data shows up, run the query if the user has typed something.
Test Plan: Pasted a filename in real fast, got results. (Previously: no results until you press something else.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12599
Differential Revision: https://secure.phabricator.com/D17739
Summary:
Ref T12566. Ref T12563. This fixes three bugs with Aphlict replay stuff:
First, Conphernece would try to repaint the UI even if no thread was open. Only repaint when a thread is open.
Second, although we deduplicate JX.Leader messages, we didn't deduplicate actual notification messages. If you browsed the leader window, then it re-elected itelf as a leader and replayed history, it could rebroadcast notifications and other windows could show doubles. Deduplicate notifications to prevent this.
Third, we always replayed the last 60 seconds of history. When you browsed the leader window, whichever window became the new leader (possibly the one you just browsed) could replay messages from before it had opened, leading to duplicate messages. Particularly, after receiving a message and then browsing you could see that message again. Instead, only replay history as far back as when the window first opened.
Test Plan:
- Clicked "Repaint" with a thread open, saw a repaint. Clicked "Repaint" with Conpherence open but no thread, no repaint and no 404 request to `/update/null/`.
- In browser A, opened three windows. In browser B, sent a notification. In browser A, browsed the leader window away twice in a row. Observed that the window which never became a leader doesn't duplicate notifications.
- In browser A, opened three windows. In browser B, sent a notification. In browser A, browsed the leader window away over and over again. Observed that replay requests issued with appropriate history windows.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12566, T12563
Differential Revision: https://secure.phabricator.com/D17722
Summary: Ref T12573. This sends a "ping" to the server, and a "pong" back to the client, every 15 seconds. This tricks ELBs into thinking we're doing something useful and productive.
Test Plan: Ran `bin/aphlict debug`, loaded Phabricator, saw ping/pong in logs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12573
Differential Revision: https://secure.phabricator.com/D17717
Summary: Ref T12566. When we reconnect, refresh the current thread even if we replayed notifications.
Test Plan:
- Clicked the "Repaint" button, saw the thread refresh.
- Clicked the "Reconnect" button, saw the thread reresh.
- Launched `aphlict debug`, killed it, restarted it, saw the thread refresh after reconnect.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12566
Differential Revision: https://secure.phabricator.com/D17713
Summary:
Fixes T12564. We already had some code which seems to deal with this properly, it just wasn't getting used.
Assign each application-level notification a unique ID, then ignore messages with duplicate IDs.
Test Plan:
- In browser A, loaded `/T123`.
- In browser B, loaded `/T123`.
- Made a comment as B.
- Saw notification as A.
- Mashed "Replay" a bunch.
- Before patch: piles of duplicate notifications.
- After patch: no duplicates.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12564
Differential Revision: https://secure.phabricator.com/D17710
Summary:
Fixes T12563. If we've ever seen an "open", mark all future connections as reconnects. When we reconnect, replay recent history.
(Until duplicate messages (T12564) are handled better this may cause some notification duplication.)
Also emit a reconnect event (for T12566) but don't use it yet.
Test Plan: {F4912044}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12563
Differential Revision: https://secure.phabricator.com/D17708
Summary: Ref T12568. Ref T12567. Allows you to force a reconnect, and shows the reconnect delay on connection close/failure.
Test Plan: {F4911879}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12568, T12567
Differential Revision: https://secure.phabricator.com/D17705
Summary: Ref T12568. This begins building toward a more useful realtime debugging console for Leader/Aphlict/general realtime stuff.
Test Plan: {F4911521}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12568
Differential Revision: https://secure.phabricator.com/D17701
Summary: Fixes T12556 Uses more common components in ConpherenceThreadList by moving to PHUIListItemView. Reduces clutter by moving privacy into the header. Gets ride of "See More" double interchanges.
Test Plan:
I need to test this more, doesn't seem to auto-select top room any more, also might build a lipsum generator.
- Create lots of rooms with various policies
- Test clicking on policy object
- Click on different rooms
- Post in rooms
- Load up second account, see room numbers
- Clear room message count by clicking on room
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12556
Differential Revision: https://secure.phabricator.com/D17698
Summary: Ref T12538. I missed this in D17695, which renamed the variable. The logic was also a little off since `jj` is an index, not a count.
Test Plan: Typed `con` in global search, which hits "Con-pherence", "Con-duit" and "Con-fig", plus a bunch of other stuff. Got results after patch.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12538
Differential Revision: https://secure.phabricator.com/D17700
Summary:
Fixes T12538. Instead of hiding "closed" results unless only closed results match, show closed results but sort them to the bottom.
This fixes the actual issue in T12538, and I think this is probably the correct/best behavior for the global search.
It also makes all other typeaheads use this behavior. They currently have a "bug" where enabled user `abcd` makes it impossible to select disabled user `abc`. This manifests in some real cases, where enabled function `members(abc)` makes it impossible to disabled user `abc` in some function tokenizers.
If ths feels worse, we could go back to filtering in the simpler cases and introduce a rule like "show closed results if only closed results would be shown OR if query is an exact match for the disabled result", but that gets dicier because "exact match" is a fuzzy concept.
(There are a lot of other minor bad behaviors that this doesn't try to fix.)
Test Plan:
Enabled project "instabug" no longer prevents bot user "instabug" from being shown:
{F4903843}
Disabled user "mmaven" is sorted below enabled user "mmclewis", in defiance of the otherwise alphabetical order. There's no visual cue that this user is disabled because of T6906.
{F4903845}
Same as above, but this source renders "disabled" in a more obvious way:
{F4903848}
Function selecting members of active project `members(instabug)` no longer prevents selection of bot user `instabug`:
{F4903849}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12538
Differential Revision: https://secure.phabricator.com/D17695
Summary: Fixes T12138. Test for the presence of being in fullscreen mode, and disable send on enter if present. Side note, I'd love a first class "hasClass" type Javelin function.
Test Plan:
- Go to Conpherence
- Type some smack, see it send on enter
- Go fullscreen like a boss
- Let the words flow
- Close fullscreen, then send on enter.
- (might be nice someday to add a "submit" button to fullscreen editor)
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12138
Differential Revision: https://secure.phabricator.com/D17590
Summary:
Fixes T12479. If you end a line with a character like ":" in a context which can trigger autocomplete (e.g., `.:`), then try to make a newline, we swallow the keystroke.
Instead, allow the keystroke through if the user hasn't typed anything else yet.
Test Plan:
- Autocompleted emoji and users normally.
- In an empty textarea, typed `.:<return>`, got a newline instead of a swallowed keystroke.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12479
Differential Revision: https://secure.phabricator.com/D17583
Summary:
Fixes T12460. Also ":)", ":(", ":/", and oldschool ":-)" variants.
Not included are variants with actual letters (`:D`, `:O`, `:P`) and obscure variants (`:^)`, `:*)`).
Test Plan: Typed `:3` (no emoji summoned). Typed `:dog3` (emoji summoned). Typed `@3` (user autocomplete summoned).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12460
Differential Revision: https://secure.phabricator.com/D17577
Summary: General CSS and usability touchup of the Remarkup bar states for fullscreen and preview. Larger fonts, more spacing, some hint of the underlying page. Disable buttons that can't be used in preview mode.
Test Plan:
Formal test coming with mobile, browsers. This is a kick the tires upload.
{F4283448}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17563
Summary:
Ref T12271. Currenty, when you "Accept" a revision, you always accept it for all reviewers you have authority over.
There are some situations where communication can be more clear if users can accept as only themselves, or for only some packages, etc. T12271 discusses some of these use cases in more depth.
Instead of making "Accept" a blanket action, default it to doing what it does now but let the user uncheck reviewers.
In cases where project/package reviewers aren't in use, this doesn't change anything.
For now, "reject" still acts the old way (reject everything). We could make that use checkboxes too, but I'm not sure there's as much of a use case for it, and I generally want users who are blocking stuff to have more direct accountability in a product sense.
Test Plan:
- Accepted normally.
- Accepted a subset.
- Tried to accept none.
- Tried to accept bogus reviewers.
- Accepted with myself not a reviewer
- Accepted with only one reviewer (just got normal "this will be accepted" text).
{F4251255}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12271
Differential Revision: https://secure.phabricator.com/D17533
Summary:
Ref T12314. Ref T6064. Ref T11580. If an install defines several different task create forms (like "Create Plant" and "Create Animal"), allow any of them to be created directly onto a workboard column.
This is just a general consistency improvement that makes Custom Forms and Workboards work together a bit better. We might do something fancier eventually for T6064 (which wants fewer clicks) and/or T11580 (which wants per-workboard control over forms or defaults).
Test Plan:
- Created several different types of tasks directly onto a workboard.
- Faked just one create form, saw the UI unchanged (except that it respects any renaming).
{F3492928}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12314, T11580, T6064
Differential Revision: https://secure.phabricator.com/D17446
Summary:
See downstream <https://phabricator.kde.org/T5404>. This code was doing some `.firstChild` shenanigans which didn't survive some UI refactoring.
This whole UI is a little iffy but just unbreak it for now.
Test Plan: Allowed and rejected desktop notifications, got largely reasonable UI rendering.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17388
Summary: Fixes T12248. Adds a flag for movable panels, and only allows those to be moved. Also cleaned up some CSS rules missing once a panel was drug into a new position.
Test Plan: Try to drag a tab panel content pane, cannot. Drag normal pane, see CSS, grab and drag same panel back, CSS looks the same.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12248
Differential Revision: https://secure.phabricator.com/D17356
Summary: Ref T12232. I can't reproduce the original issue, but this should probably fix it without side effects?
Test Plan: Added a card with Stripe, but I could do that before too.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12232
Differential Revision: https://secure.phabricator.com/D17333
Summary:
Ref T12174.
- Fix text antialiasing pop-in at the end of the animation in Safari.
- Fix flickery animation replay when mousing inside a tooltip element, or rapidly switching between tooltip elements.
- To accomplish this: don't play the animation if the last tip was hidden less than 500ms ago.
Test Plan:
- Viewed a tooltip in Safari.
- Waved cursor wildly over application items, both left-right (within an item) and up-down (between items).
Tooltips appeared stable and non-flickery in all cases.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12174
Differential Revision: https://secure.phabricator.com/D17272
Summary: Ref T11957. Needs some more polish, but I think everything here is square.
Test Plan: Add personal/global items to home, test mobile. Test workboards / colors.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: 20after4, rfreebern, Korvin
Maniphest Tasks: T11957
Differential Revision: https://secure.phabricator.com/D17259
Summary:
This adds a more complete emoji datasource, with a typeahead and autocomplete. It works by pulling in a raw datasource from EmojiOne (I chose Unicode 8, but they have a Unicode 9 datasource as well) and transforming it for speed/need. If we build more robustness or an actual picker into the Remarkup bar, having the additional keywords, etc, might be important. When Unicode 9 support is more prevalent, we should only need to update the single file.
Tossing up as a proof of concept on engineering direction. Also I can't quite get the autocomplete to complete.
Test Plan: Test UIExamples, Autocomplete, and TypeaheadSource
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12139
Differential Revision: https://secure.phabricator.com/D17244
Summary:
Fixes T12152. When creating a subproject task directly from a parent project, we can get column information back about the subproject column, which isn't visible. Just ignore this rather than trying to draw a card into a column which does not exist.
This flow (see test plan) is a little unintuitive since the card never appears on the workboard, but this class of things is probably roughly somewhere in T4900.
Test Plan:
- Create a parent project A.
- Create subproject B.
- On the workboard for A, select "Create Task..." from the dropdown.
- Add tag "B" in the dialog that pops up.
- Save the task.
Note that this flow creates a task tagged only with "B", since "A" and "B" are mutually exclusive tags.
Before patch: UI freezes (JX.Mask is never removed), JS error in console.
After patch: workflow completes. Note that card is (correctly) not visible: it's in an invisible subproject column.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12152
Differential Revision: https://secure.phabricator.com/D17242
Summary:
Earlier, I made some changes so that when you create or edit an inline, the comment at the bottom of the page updates (even though you didn't fiddle with the stacked actions inputs).
At the last second I broke them by spelling this wrong while cleaning things up, so they didn't actually work. Spell the property correctly ("showPreview", not "shouldPreview").
Also, we have some JS which rewrites "Not Visible" into "View", but it fires in an inconvenient way now and is flickery for me. Ideally this should get cleaned up slightly better eventualy, but at least make is stop doing so much flickery layout for now.
Test Plan:
- Wrote no comment on a revision.
- Added an inline.
- Saw comment preview properly update immediately.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17229
Summary:
See D17210. Currently, this handler needs to be installed on each menu that doesn't build with the default behavior.
Rather than copy-pasting it to the user menu, try to make it a default behavior. This adds a new rule: don't close the menu if the item is a dynamic item built in JS with PHUIXActionView.
This allows dynamic items to control the menu themselves, while giving static items the desired default behavior.
Test Plan:
- Opened menus on: dashboards, user menu, timeline comments. Clicked stuff. Menus went away.
- Other menus still seemed to work right: Diffusion, Favorites, mobile menu.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17222
Summary: Ref T5867. I sure love Javascript.
Test Plan: Navigated between Home, Diffusion and Differential, opening the user profile menu. Saw appropraite help items.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5867
Differential Revision: https://secure.phabricator.com/D17214
Summary:
Still lots to fix here, punting up since I'm running into a few roadblocks.
TODO:
[] Sort Personal/Global correctly
[] Quicksand in Help Items correctly on page changes
Test Plan: Verify new menus work on desktop, tablet, mobile. Test logged in menus, logged out menus. Logging out via a menu, verify each link works as expected. Help menus get build when using an app like Maniphest, Differential. Check that search works, preferences still save.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12107
Differential Revision: https://secure.phabricator.com/D17209
Summary:
In D16157, dropdown menus got an overly-broad check for not closing when an item is clicked.
Specifically, we don't want to close the menu if the item is really opening a submenu, like "Edit Related Objects..." does on mobile.
The check for this is too broad, and also doesn't close the menu if the item has workflow.
Instead, use a narrower check.
Test Plan:
- Menu still stays open when toggling submenus like "Edit Related Objects".
- Menu now closes properly when using workflow items like "Edit Comment" or "Remove Comment".
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17210
Summary: Never really used this to full potential and takes up a lot of code and space. Remove option for now and make all profile nav menus small by default.
Test Plan: Review user, project, workboard. Set new menus.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T5867
Differential Revision: https://secure.phabricator.com/D17206
Summary:
Fixes T10687. Fixes T12064.
- Primarily, adds a margin around the edge of the screen for the purposes of aligning the tooltip.
- Also, tries to flip the tooltip if it can (e.g., if the tooltip normally goes east, try west first), then tries other positions exhastively.
Test Plan:
{F2309363}
{F2309364}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12064, T10687
Differential Revision: https://secure.phabricator.com/D17145
Summary: Fixes T12065. Some of the normal behavior of these actions got juggled when I made "Accept" and "Reject" conflict.
Test Plan:
- Added "Accept".
- Added "Reject", saw it remove "Accept".
- Added "Change Projects".
- Added "Assign/Claim".
- Removed "Assign/Claim".
- Removed "Accept".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12065
Differential Revision: https://secure.phabricator.com/D17143
Summary: Ref T3612. Doesn't render correctly, need help please. Adds a download icon into the renderfilelinkview to allow easier downloads.
Test Plan: Click on link, get download, click on file, get lightbox.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T3612
Differential Revision: https://secure.phabricator.com/D16980
Summary:
Ref T11114. When a user selects "Accept", and then selects "Reject", remove the "Accept". It does not make sense to both accept and reject a revision.
For now, every one of the "actions" conflicts: accept, reject, resign, claim, close, commandeer, etc, etc. I couldn't come up with any combinations that it seems like users are reasonably likely to want to try, and we haven't received combo-action requests in the past that I can recall.
Test Plan:
- Selected "Accept", then selected "Reject". One replaced the other.
- Selected "Accept", then selected "Change Subscribers". Both co-existed happily.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17132
Summary:
Ref T11114. Recent changes broke the links to jump to inline comments from the previews because they get hooked up with JS.
Restore the linking behavior.
Test Plan: Clicked "View" on an inline comment preview, jumped to that comment.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17131
Summary: Ref T11114. This comments nearly working on EditEngine. Only significant issue I caught is that the "View" link doesn't render properly because it depends on JS which is tricky to hook up. I'll clean that up in a future diff.
Test Plan: {F2279201}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17116
Summary: Ref T11114. This begins restoring comment actions to Differential, but on top of EditEngine.
Test Plan: {F2263148}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17107
Summary:
Fixes T12049. This expands "Haunted" comment panels to EditEngine, and by extension to all EditEngine applications.
Eventual goal is to remove custom commenting code in Differential and replace it with EditEngine code.
Changes from current "haunt" mode:
- This only has one mode ("pinned"), not two ("pinned", "pinned with preview"). There's an inline preview and scroll behavior is a little better.
- Now has a UI action button.
Slightly tricky stuff:
- This interacts with "Fullscreen" mode since it doesn't make sense to pin a full-screen comment area.
- This should only be available for comments, not for remarkup fields like "Description" in "Edit Task".
Test Plan:
- Pinned/unpinned in Maniphest.
- Pinned/fullscreened/unfullscreened/unpinned.
- Checked that "Edit Task" doesn't allow pinning for "Description", etc.
- Pressed "?", read about pressing "Z".
- Pressed "Z".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12049
Differential Revision: https://secure.phabricator.com/D17105
Summary: Reorgaizes the CSS here a bit, by object list style, adds in a new drag ui class, which will be used in menu ordering.
Test Plan:
Workboards, Home Apps.
{F2126266}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17057
Summary:
Persona is going to be decommed November 30th, 2016.
It is highly unlikely that anyone is currently using persona as a real
login method at this point.
Test Plan: tried locally to add auth adapter.
Reviewers: chad, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D16371
Summary: Ref T3612, prevents lightbox from spawning from inside a lightbox.
Test Plan: Click on file lightbox, leave file comment, click file comment, get take to file page instead of another lightbox.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T3612
Differential Revision: https://secure.phabricator.com/D16978
Summary: Ref T3612, this adds a anchor around the large icon with hover state so you can download from here as well.
Test Plan: Hover over .ics file, click, get download.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T3612
Differential Revision: https://secure.phabricator.com/D16977
Summary: Fixes T11791. We do this in durable column, but not in regular Conpherence. I think this is the right place? Not sure how this will feel with high lag.
Test Plan: Submit lots of text in a Conpherence.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11791
Differential Revision: https://secure.phabricator.com/D16969
Summary: Ref T3612. Mobilizes the new lightbox, changes large buttons to circle icons like Conpherence.
Test Plan: Click each new button on desktop, mobile.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T3612
Differential Revision: https://secure.phabricator.com/D16961
Summary: Ref T3612. Moves the listener to the frame of the image.
Test Plan: Click on image, no close, click on grey frame, closes image. Test image and document, clicking on arrows.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T3612
Differential Revision: https://secure.phabricator.com/D16959
Summary: Ref T3612. Passes in file size and file icon for non-images.
Test Plan: Review a PDF and PSD in a lightbox.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T3612
Differential Revision: https://secure.phabricator.com/D16957
Summary: Removes the viewable restriction on embedded files. Builds a basic lightbox UI for commenting.
Test Plan:
Add psd, pdf to Maniphest task, clicked on download, comment, left comment. Closed box.
{F1943726}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T3612
Differential Revision: https://secure.phabricator.com/D16917
Summary: Adds a comment box, you can put text into it, hit enter, and see it come back.
Test Plan: Put text into box, see it come back.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T3612
Differential Revision: https://secure.phabricator.com/D16907
Summary: Basic work in progress, but should show timeline comments for files when in lightbox mode. Looks reasonable.
Test Plan: click on images, see comments from timeline.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T3612
Differential Revision: https://secure.phabricator.com/D16896
Summary:
Fixes T11886. D16882 prevented workboard cards from being dragged between columns because it reduced the effective document height to almost nothing (~78px, just the menu bars).
Instead, use the larger of the document height and viewport height as "infinity".
Test Plan: Dragged columns between workboards successfully.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11886
Differential Revision: https://secure.phabricator.com/D16885
Summary:
Fixes T11785. Lightbox calls `JX.Stratcom.pass()` to let other handlers react, but should not. At least today, we never put, e.g., links inside a lightbox.
This code appears in the original commit so it was probably just copy/pasted from somewhere and I missed it in review.
(Or there's some edge case I'm not thinking of and we'll figure it out soon enough.)
Additionally, blacklist `/file/data/` from Quicksand naviagtion: Quicksand should never fetch these URIs.
Test Plan:
- Disabled `security.alternate-file-domain`.
- Enabled Quicksand ("Persistent Chat").
- Clicked an image thumbnail on a task.
- Repeated that until things flipped out a bit.
- After the patch: no issues.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11785
Differential Revision: https://secure.phabricator.com/D16884
Summary:
Ref T11816. We currently try to expand the picker control from the little calendar icon. This works alright on desktop, but not great on tablet/mobile.
On tablet/mobile, center the control on screen instead. Also, mask the background since it can get a bit busy because we can't really control what's under the control anymore.
Finally, move the little popup thing around if the user resizes the window.
Test Plan: {F1922773}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11816
Differential Revision: https://secure.phabricator.com/D16866
Summary: Redesign the action comment box for better use in two column, mobile, nuance.
Test Plan: Test in mobile / desktop / tablet, adding and removing actions. Actionless comment boxes, etc.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: cspeckmim, Korvin
Differential Revision: https://secure.phabricator.com/D16811
Summary:
Ref T8510. We had two issues with mixed-case result sorting, like typing `@joe` to match user `Joe`.
- The fallback sort was not normalized properly, so "J" could sort after "j". Instead, normalize values for sorting.
- The `prefix_hits` and older `priority_hits` mechanisms were competing destructively. The `prefix_hits` mechanism completely replaces the `priority_hits` mechanism. Instead, use only the `prefix_hits` mechanism.
Test Plan:
- Copied results for "joe" from WMF.
- Hard-coded the controller to return them.
- Searched for `@joe`.
- After patches, first hit is user "Joe".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8510
Differential Revision: https://secure.phabricator.com/D16826
Summary: Ref T11809. These have been replaced with more flexible storage that accommodates a wider range of behaviors, including those in the ICS format and RRULEs.
Test Plan:
- Ran migration.
- Viewed, created, edited events.
- Grepped for all removed names/symbols.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11809
Differential Revision: https://secure.phabricator.com/D16789
Summary:
This feels a little cleaner:
- Clean up transaction log a bit.
- Use a checkbox instead of a two-option dropdown.
This is a little messy because the browser doesn't send anything if the user submits a form with an un-clicked checkbox.
We now send a dummy value ("Hey, there's definitely a checkbox in this form!") so the server can figure out what to do.
Test Plan:
- Edited all-dayness of an event.
- Viewed transaction log.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16776
Summary: I think maybe these should be more separate from JX.Title, but seems to work ok. May build new favicons just for messages though. Proof of concept UI.
Test Plan: Send message on one browser, see red icon in other browser. Click on menu, count and favicon switch back to normal.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16734
Summary: Fixes T11764. Moves rendering of the column to client-side, which can skip if it detects we're on mobile.
Test Plan: Open column on desktop, switch to mobile, don't see column. Toggle column on mobile on and off. Switch back to desktop.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11764
Differential Revision: https://secure.phabricator.com/D16725
Summary:
Ref T10747. When a user drops a ".ics" file or a bunch of ".ics" files into a calendar view, import the events.
(Possibly we should just do this if you drop ".ics" files into any application, but we can look at that later.)
Test Plan: Dropped some .ics files into calendar views, got imports.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10747
Differential Revision: https://secure.phabricator.com/D16722
Summary: This removes 'full-display', 'minimal-display' from Conpherence, which I recall was because we had 2 UIs for column and regular chat. I'm also tossing in slightly nicer search results, with a link to the actual message and the full date shown for context.
Test Plan: Post a message in mobile, tablet, full conpherence, and in durable column. Clean up UI in durable column. Do a search in Full UI, click on result date, get taken to the message... usually. My test data is a little wonky, but I think this works most of the time.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16710
Summary: This focuses the search field when the user opens search, and then the textarea for pontificate if the search box is closed.
Test Plan: Open/Close/Open/Close
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16709
Summary: I passed this in as a config, but need to parse it live when threads change, otherwise the wrong room could be searched.
Test Plan: Search in one room, click a second, search again, see correct results.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16707
Summary: Fixes the send on enter flash, only uses the `Threads` loading animation on changing threads, not sending a message.
Test Plan: Change threads, post a message.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16705
Summary: Adds a search bar toggle and results for searching inside a Conpherence Room. The UI of the results itself are not styled yet, and will follow up with another diff.
Test Plan: Go to Conpherence, search for "asdf", get lots of results. Search for nothing, get no change, search for something fictitious, get no threads found (will follow up with search result UI).
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16697
Summary: Ref T11730. Removes unused code since this is now it's own page.
Test Plan: rebuild maps, grep for javelin code, classnames
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11730
Differential Revision: https://secure.phabricator.com/D16700
Summary: Ref T11730. Removes the front end crop feature. Will follow up with proper removal, but this seems broken outright.
Test Plan:
Edit a room, don't seen "Crop" feature. Upload new photo, works fine.
- grep for `ConpherencePicCropControl`
- grep for `aphront-crop`
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11730
Differential Revision: https://secure.phabricator.com/D16665
Summary: When the durable column is re-opened, scroll user to latest message. Though later we should scroll them to the last read.
Test Plan: Minimize window, reload page, pop up window, see proper scroll position.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16649
Summary: A bit better styling, this adds an indication icon for if you're connected or not (and later, away, etc).
Test Plan: Test in Notifications menu, Conpherence full, Durable Column.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16647
Summary: Sends and stores additional body classes at the page level. Removes old ones, sets new ones.
Test Plan: home -> application search -> colored workboard -> config -> home with persistent chat open and minimized.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16646
Summary: This exposes the chat window to a larger audience beside people who accidentaly hit `\`.
Test Plan:
Lots of clicks and reloads.
{F1856043}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16643
Summary: This feels pretty reasonable with little effort, and I think I'd use it more than the full column.
Test Plan:
Chat a lot on various pages.... still some quicksand quirks around various pages.
{F1853487}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: scp, Korvin
Differential Revision: https://secure.phabricator.com/D16627
Summary: Fixes T11623. Enables send-on-enter and shift-enter for linebreaks, per durable column. Also cleaned up UI for Joining Room or Logging In.
Test Plan: See room I can join, click Join Room. Leave Room, Log out, visit room with login prompt. Login, Join Room again.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11623
Differential Revision: https://secure.phabricator.com/D16595
Summary:
Fixes T11703. This mostly avoids rounding errors.
If point values include "0.001", we also get three digits of precision: 1.000.
Maybe useful if your point field is called "bitcoins" or something.
Test Plan:
Before:
{F1851404}
After:
{F1851405}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11703
Differential Revision: https://secure.phabricator.com/D16601
Summary: Mostly quality of life in renames and moving everything to the view class. Minor CSS tweaks. Fix room handles getting added when adding a new user.
Test Plan: Add to room, remove from room.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16560
Summary:
Minor rebuild / redesign of Conpherence. Most of this is new UX and tossing out things like widgets, device fallbacks. I expect some of the UI to get more polished after next pass, but most everything here is in place.
- Removed "Widgets", now just a single Participants pane
- Added "Topic"
- New header
- Settings, Edit are action icons
- Removed a lot of JS
- Simplified CSS as much as I could
Test Plan:
Desktop, Tablet, Mobile. Adding and removing people. Setting new topics, new rooms.
{F1828662}
{F1828669}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16550
Summary: This adds a "column" icon into crumbs, like in workboards, for expanding or hiding the "Widget Pane". This is per user sticky and defaults to off.
Test Plan: View a Conpherence Room, see no widgets by default. Toggle it on, see widget. Reload page, see widget stick. Verify mobile, tablets ignore hiding.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10364
Differential Revision: https://secure.phabricator.com/D16533
Summary:
Moves search and new room out of crumb bar and into the thread column. This opens up space to add "Edit Room" into the crumbs area as an action link. Also removed 'widget-edit' pathways and javascript.
Fixes T8972
Test Plan:
Search, New, Edit rooms. Click different rooms, see correct URL each time.
{F1813226}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T8972
Differential Revision: https://secure.phabricator.com/D16543
Summary:
Two minor issues that I caught in the log while fixing Phame permissions:
- We had a JS bug which would cause us to immediately generate two comment previews at the exact same time -- one for loading the page, and one for "switching to desktop". Instead, only generate the "switch to desktop" preview if we really switched to desktop from a different device layout.
- These two requests could end up reading/writing the VersionedDraft table at exactly the same time fairly often (e.g., after a comment submission, the page would load, send two preview requests at exactly the same time, and they'd race fairly reliably for me locally). If we do race, recover from the race.
Test Plan:
Submitted some Phame comments.
- No more error log errors about VersionedDraft keys.
- Saw only one preview request when loading the page instead of two.
Here's the specific stack trace I caught:
```
[Mon Sep 05 12:15:33.639930 2016] [:error] [pid 50608] [client 127.0.0.1:55278] [2016-09-05 14:15:33] EXCEPTION: (AphrontDuplicateKeyQueryException) #1062: Duplicate entry 'PHID-POST-fknnpzjnsdgc3rqobhst-PHID-USER-pr5rjpuilpfserepsd2k-13' for key 'key_object' at [<phutil>/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:314]
[Mon Sep 05 12:15:33.640801 2016] [:error] [pid 50608] [client 127.0.0.1:55278] arcanist(head=master, ref.master=9e82ef979e81), corgi(head=master, ref.master=5b9171222bc9), instances(head=stable, ref.master=485bc8128198, ref.stable=2983bc917601), ledger(head=master, ref.master=4da4a24b8779), libcore(), phabricator(head=phame2, ref.master=4b6da9735ba7, ref.phame2=4b6da9735ba7), phutil(head=stable, ref.master=97f05269fdb1, ref.stable=c14343ee620e), services(head=stable, ref.master=1fcb5cdb7582, ref.stable=2d8088a5b4b3)
[Mon Sep 05 12:15:33.640815 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #0 <#2> AphrontBaseMySQLDatabaseConnection::throwCommonException(integer, string) called at [<phutil>/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:348]
[Mon Sep 05 12:15:33.640830 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #1 <#2> AphrontBaseMySQLDatabaseConnection::throwQueryCodeException(integer, string) called at [<phutil>/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:289]
[Mon Sep 05 12:15:33.640833 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #2 <#2> AphrontBaseMySQLDatabaseConnection::throwQueryException(mysqli) called at [<phutil>/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:185]
[Mon Sep 05 12:15:33.640836 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #3 <#2> AphrontBaseMySQLDatabaseConnection::executeRawQuery(string) called at [<phutil>/src/xsprintf/queryfx.php:8]
[Mon Sep 05 12:15:33.640839 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #4 <#2> queryfx(AphrontMySQLiDatabaseConnection, string, string, string, array, string)
[Mon Sep 05 12:15:33.640841 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #5 <#2> call_user_func_array(string, array) called at [<phutil>/src/aphront/storage/connection/AphrontDatabaseConnection.php:42]
[Mon Sep 05 12:15:33.640844 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #6 <#2> AphrontDatabaseConnection::query(string, string, string, array, string) called at [<phabricator>/src/infrastructure/storage/lisk/LiskDAO.php:1261]
[Mon Sep 05 12:15:33.640846 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #7 <#2> LiskDAO::insertRecordIntoDatabase(string) called at [<phabricator>/src/infrastructure/storage/lisk/LiskDAO.php:1106]
[Mon Sep 05 12:15:33.640849 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #8 <#2> LiskDAO::insert() called at [<phabricator>/src/infrastructure/storage/lisk/LiskDAO.php:1075]
[Mon Sep 05 12:15:33.640851 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #9 <#2> LiskDAO::save() called at [<phabricator>/src/applications/draft/storage/PhabricatorVersionedDraft.php:65]
[Mon Sep 05 12:15:33.640854 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #10 <#2> PhabricatorVersionedDraft::loadOrCreateDraft(string, string, integer) called at [<phabricator>/src/applications/transactions/editengine/PhabricatorEditEngine.php:1669]
[Mon Sep 05 12:15:33.640857 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #11 <#2> PhabricatorEditEngine::buildCommentResponse(PhamePost) called at [<phabricator>/src/applications/transactions/editengine/PhabricatorEditEngine.php:894]
[Mon Sep 05 12:15:33.640859 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #12 <#2> PhabricatorEditEngine::buildResponse() called at [<phabricator>/src/applications/phame/controller/post/PhamePostEditController.php:60]
[Mon Sep 05 12:15:33.640862 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #13 <#2> PhamePostEditController::handleRequest(AphrontRequest) called at [<phabricator>/src/aphront/configuration/AphrontApplicationConfiguration.php:237]
[Mon Sep 05 12:15:33.640865 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #14 phlog(AphrontDuplicateKeyQueryException) called at [<phabricator>/src/aphront/handler/PhabricatorAjaxRequestExceptionHandler.php:27]
[Mon Sep 05 12:15:33.640868 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #15 PhabricatorAjaxRequestExceptionHandler::handleRequestException(AphrontRequest, AphrontDuplicateKeyQueryException) called at [<phabricator>/src/aphront/configuration/AphrontApplicationConfiguration.php:644]
[Mon Sep 05 12:15:33.640870 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #16 AphrontApplicationConfiguration::handleException(AphrontDuplicateKeyQueryException) called at [<phabricator>/src/aphront/configuration/AphrontApplicationConfiguration.php:242]
[Mon Sep 05 12:15:33.640873 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #17 AphrontApplicationConfiguration::processRequest(AphrontRequest, PhutilDeferredLog, AphrontPHPHTTPSink, MultimeterControl) called at [<phabricator>/src/aphront/configuration/AphrontApplicationConfiguration.php:149]
[Mon Sep 05 12:15:33.640879 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #18 AphrontApplicationConfiguration::runHTTPRequest(AphrontPHPHTTPSink) called at [<phabricator>/webroot/index.php:17]
```
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16494
Summary: Ref T11132. This gets rid of the red bar for admins and instead shows a new menu item next to notifications/chat if there are unresolved configuration issues. Menu goes away if there are no issues. May move this later into the bell icon, but think think might be the right place to start especially for NUX and updates. Maybe limit the number of items?
Test Plan:
Tested with some, lots, and no config issues.
{F1790156}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16461
Summary:
Fixes T11468. I was able to find //a// reproduction case for the issue, at least, described in my comments there.
When the server sends back position information for columns we aren't displaying, for whatever reason, just ignore that information.
Future work in T4900 to do more synchronization may revisit this.
Test Plan: See T11468#190177 for steps. Did that stuff with this patch, got a clean edit.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11468
Differential Revision: https://secure.phabricator.com/D16397
Summary: Adds a class for explicitly hiding the sidenav.
Test Plan: Set Config to Enable Filetree. View a diff, see tree. Press `f`, see it go away. Reload page, see persistence.
Reviewers: avivey, epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16359
Summary:
Ref T11326. Currently, we link Calendar days using hidden DOM nodes.
This is nice because it's simple, and right-clicking a day works properly. However, it's a bit ugly/unintuitive, messy, and unclear. It's especially messy because days are really two different rows, one for events and one for day/week numbers.
Instead, use JS to highlight day cells. You can still right-click by clicking the actual day number, which seems like a reasonable compromise.
Test Plan: {F1738941}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16334
Summary:
Ref T11326. When an event is all-day, hide the time controls for the start/end dates. These aren't used and aren't helpful/useful.
This got a little more complicated than it used to be because EditEngine forms may have only some of these controls present.
Test Plan: Edited an all-day event; edited a normal event; swapped an event between normal and all-day.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16327
Summary: Ref T11326. This just cleans things up a little and removes some of the obvious layout/CSS issues.
Test Plan:
- Viewed day view before/after. Also viewed profile panel.
Before:
{F1725547}
After:
{F1725548}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16308
Summary: Fixes T9202.
Test Plan:
- Viewed day in 12-hour, saw "8:00 PM".
- Viewed day in 24-hour, saw "16:00".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9202, T10932
Differential Revision: https://secure.phabricator.com/D16290
Summary: Ref T10252. This is similar to D16259, but makes KeyboardShortcutManager more relaxed about `altKey` when typing obscure characters.
Test Plan: Pressed Option + Shift + 7 on a German keyboard layout, saw Conphernece sidebar toggle.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10252
Differential Revision: https://secure.phabricator.com/D16260
Summary:
Ref T10252. On the German keyboard layout, you must type "Alt" + "L" to generate an "@" character.
We currently ignore this event, assuming it's a keyboard command. However, I think we can safely continue so that autocomplete works on German layouts.
Test Plan:
- Switched keyboard layout to German.
- Typed Alt + L to generate an "@".
- Typed some username text.
- Got autocompleter.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10252
Differential Revision: https://secure.phabricator.com/D16259
Summary:
Ref T4788. This fixes all the bugs I was immediately able to catch:
- "Directory-Like" graph shapes could draw too many vertical lines.
- "Reverse-Directory-Like" graph shapes could draw too few vertical lines.
- Terminated, branched graph shapes drew the very last line to the wrong place.
This covers the behavior with tests, so we should be able to fix more stuff later without breaking anything.
Test Plan:
- Added failing tests and made them pass.
{F1708158}
{F1708159}
{F1708160}
{F1708161}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788
Differential Revision: https://secure.phabricator.com/D16216
Summary: Ref T10628. Cleans up remaining weird, unused tab behaviors in ObjectBoxView to simplify ObjectBox.
Test Plan: Toggled tabs in Files.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10628
Differential Revision: https://secure.phabricator.com/D16208
Summary:
Ref T4788. When closing a task as a duplicate of another task, you can only select one task, since it doesn't really make sense to merge one task into several other tasks (this operation is //possible//, but probably not what anyone ever wants to do, I think?).
Make the UI understand this: after you select a task, disable all of the "select" buttons in the UI to make this clear.
Test Plan:
- Used "Close as Duplicate", only allowed to select 1 task.
- Used other editors like "Merge Duplicates In", allowed to select lots of tasks.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788
Differential Revision: https://secure.phabricator.com/D16203
Summary:
Ref T11179. Ref T4768. Currently, on `master`, if two users open "Edit Revisions" at the same time, then add revisions A and B, only the last state wins (just "B").
Instead, apply these as "add A" and "add B" so they merge in a natural way.
Test Plan:
- Opened edit dialog in two windows.
- Added "A" in one, "B" in the other.
- Saved both.
- Saw "Added A" and "Added B" transactions, instead of "Added A" and "Removed A, added B".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4768, T11179
Differential Revision: https://secure.phabricator.com/D16164
Summary:
Ref T11179. Alternative to D16152. I think this turned out a bit better than the other one did.
Currently, we render two copies of the menu (one for mobile, one for desktop). A big chunk of this is sharing the nodes instead: when you open the mobile dropdown menu, it steals the nodes from the document. When you close it, it puts them back. Magic! Sneaky!
Test Plan:
{F1695499}
{F1695500}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11179
Differential Revision: https://secure.phabricator.com/D16157
Summary:
Ref T8510. Sort prefix matches above non-prefix matches, so that "Ape Discovery" does not match "discovery" better than "Discovery".
Sort functions last.
Rename function internal strings so they don't get over-promoted the prefix-match rules.
Add kind of a hack to get "Project X" sorting above all the "Project X (Milestone 1)" results.
Test Plan:
Created "Ape Discovery", "Baboon Discovery", "Chimpanzee Discovery", etc.
Main project now sorts above milestones:
{F1681773}
Prefix matches now sort above other matches:
{F1681774}
Function results (rarely used) are now less prominent:
{F1681775}
Better function results here:
{F1681776}
More function results:
{F1681777}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8510
Differential Revision: https://secure.phabricator.com/D16094
Summary: Ref T6523. Allows you to click stuff instead of using drag-and-drop.
Test Plan: On iOS simulator, created and updated a mock.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6523
Differential Revision: https://secure.phabricator.com/D16088
Summary:
Fixes T10402.
I tried about 50 variations on the wording and notification layout, this seemed by far the most reasonable.
Didn't implement a way to ignore the warning, which might be required - but figured this is serious and broken enough while being completely invisible 99% of the time that it's worth shouting about.
Test Plan: Messed around with $_SERVER['HTTPS'] on the server side and client_uri on the client side - saw reasonable results in all combinations.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Maniphest Tasks: T10402
Differential Revision: https://secure.phabricator.com/D16064
Summary:
Ref T4103. This removes these options:
{F1660585}
The jump nav option came from T916, when we had a separate jump nav on the home page. Essentially no one has ever been confused by the behavior of search or disabled this feature. Here are the stats for this install:
| Total Users | 36656 |
| Have Set Any Preference | 3084 |
| Have Disabled Jump | 6
| Are Not "Security Researchers" | 2
| Any Account Activity | 0
The "/" option came in the same change, but the preference came from T989. This keystroke conflicts with a default Firefox keystroke. Almost no one cares about this either, but I count 6 real users who have disabled the behavior. I suspect the number of real users who //use// it may be smaller.
In Safari and Firefox, the "tab" key does the same thing.
In Chrome, the "tab" key does the same thing if {nav Preferences > Web Content > "Pressing Tab highlights..."} is disabled.
Upshot: jump nav is great, bulk of the change in T989 was clearly great, specific preferences that came out of it seem not-so-great and now is a good time to kill them as we head into T4103.
Test Plan:
- Grepped for removed constants.
- Pressed "/".
- Searched for `T123`.
- Viewed settings.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D15976
Summary:
Ref T3025. Chrome gives us an easily-accessible, much better guess at which timezone the user is in.
Firefox also exposes "Intl" but this doesn't seem to be a reliable method to read the timezone.
Test Plan:
In Chrome, swapped my system date/time between zones, clicked the "reconcile" popup, got the dropdown prefilled accurately.
In Safari (no `Intl` API) got the normal flow with no default selected.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T3025
Differential Revision: https://secure.phabricator.com/D15962
Summary: Ref T3025. This adds a check for different client/server timezone offsets and gives users an option to fix them or ignore them.
Test Plan:
- Fiddled with timezone in Settings and System Preferences.
- Got appropriate prompts and behavior after simulating various trips to and from exotic locales.
In particular, this slightly tricky case seems to work correctly:
- Travel to NY.
- Ignore discrepancy (you're only there for a couple hours for an important meeting, and returning to SF on a later flight).
- Return to SF for a few days.
- Travel back to NY.
- You should be prompted again, since you left the timezone after you ignored the discrepancy.
{F1654528}
{F1654529}
{F1654530}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T3025
Differential Revision: https://secure.phabricator.com/D15961
Summary: Bumping this up higher since two column views get extra tight fast below 900 px. This felt most correct to me, dialing it back from first attempt at 960. Mostly I don't want to ever accidentally trigger it when I'm on the 12" MacBook. Ref T10926
Test Plan: Durable Column, Workboards, Dashboards, Tasks.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: avivey, Korvin
Maniphest Tasks: T10926
Differential Revision: https://secure.phabricator.com/D15960
Summary:
Ref T5187. This definitely feels a bit flimsy and I'm going to hold it until I cut the release since it changes a couple of things about Workflow in general, but it seems to work OK and most of it is fine.
The intent is described in T5187#176236.
In practice, most of that works like I describe, then the `phui-file-upload` behavior gets some weird glue to figure out if the input is part of the form. Not the most elegant system, but I think it'll hold until we come up with many reasons to write a lot more Javascript.
Test Plan:
Used both drag-and-drop and the upload dialog to upload files in Safari, Firefox and Chrome.
{F1653716}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5187
Differential Revision: https://secure.phabricator.com/D15953
Summary:
Ref T10923. This makes the "Clone URI" UI a little nicer:
- Show whether each URI is read-only, read-write, or external.
- Clicking the button selects the URI.
- Add a link to manage the appropriate credentials.
Test Plan: {F1308302, size=full}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15891
Summary: Fixes T9295
Test Plan: Create event, open datepicker for start date, choose 1/31/2016, open datepicker again, click right button to scroll month. New suggested date should be 2/29/2016
Reviewers: chad, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T9295
Differential Revision: https://secure.phabricator.com/D15727
Summary: Fixes T9296
Test Plan: Create an event, change start time to `3PM`, end value should update to `4:00 PM`, not `4:0 PM`
Reviewers: chad, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T9296
Differential Revision: https://secure.phabricator.com/D15725
Summary: Fixes T10816. The way these work is a little unusual since these chunks of file-rendering code are unusuall performance-sensitive, so the Differential version doesn't adapt directly to Diffusion. Both can possibly be unified at some point in the future, although they do slightly different things.
Test Plan: {F1220170}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10816
Differential Revision: https://secure.phabricator.com/D15719
Summary:
Ref T4571. Allows users to click the "read-only mode" notification to get more information about why an install is in read-only mode.
Installs can be in this mode for several reasons (explicit administrative action, no masters defined, no masters reachable), and it's useful to be able to tell the difference.
Test Plan: {F1212930}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15671
Summary:
Ref T4571. There will be a very long path beyond this, but add a basic read-only mode. You can explicitly enable this to put Phabricator in a sort of "maintenance" mode today if you're swapping databases or something.
In the long term, we'll automatically degrade into this mode if the master database is down.
Test Plan:
- Enabled read-only mode.
- Browsed around.
- Didn't immediately see anything that was totally 100% broken.
Most stuff is 80-90% broken right now. For example:
- Stuff like submitting comments doesn't work, and gives you a confusing, unhelpful error.
- None of the UI really knows that it's read-only. EditEngine stuff should all hide itself and say "you can't add new comments while an install is in read-only mode", for example, but currently does not.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15662
Summary:
Ref T6027. Try this out and see how it feels? Clear issues:
- This definitely shouldn't be at the top.
- You should probably be able to select it multiple times?
- Some of the "which columns show up" rules might need adjustment?
- Diamond marker maybe not great?
Not sure I love this but it doesn't feel //terrible//...
Test Plan: {F1207891}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6027
Differential Revision: https://secure.phabricator.com/D15638
Summary:
Ref T10698. Currently, we show the spacer/continuation lines around previews, but these don't make sense in previews.
(Other stuff also uses this code so I can't simply remove `spacer`.)
Test Plan:
Before:
{F1199924}
After:
{F1199925}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10698
Differential Revision: https://secure.phabricator.com/D15562
Summary:
Fixes T10646. When you load the page or click "New Condition" or "New Action", we try to add a condition and action with some default values.
Currently, the logic just sets everything to `null` or `'default'`. This technically works in Safari, but is less successful in Chrome. (I think Safari prevents you from picking an invalid value.)
Instead of relying on the browser to pick the right value, set the correct value explicitly.
Test Plan:
- Created a new rule in Chrome, Safari.
- Added fields and conditions in Chrome, Safari.
- Edited existing rules in Chrome, Safari.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10646
Differential Revision: https://secure.phabricator.com/D15507
Summary: See Q335. This might need some tweaking, but the JS works now so we can move/style the node now.
Test Plan:
{F1169168}
- Also dragged stuff around, saw counts update properly.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15462
Summary:
This fix further addresses T10229. The problem and solution are the same:
- If the DOM is mutated during a touch, it never registers as a 'click' so the tapped button does not activate.
- This was partially addressed in D15136, which covered taps on code lines in a Differential view.
- Tapping on some buttons, like "Reply" or "Hide Comment" still caused the problem by showing a tooltip.
- There are probably similar buttons elsewhere, other than in Differential, exhibiting the same 'needs multiple taps to work' behaviour.
- The testing in the iOS simulator performed for D15136 did not reveal that the problem with "Hide comment" and such remained because the small device size used for testing triggered the `!= 'desktop'` path for tooltips.
To fix it:
- Don't show tooltips for touch events. You can't 'hover' with a finger (with today's tech) so that UI paradigm doesn't apply.
- Show the tooltips for regular mouse events, even if they are on the same device. Some devices have both touch and a mouse.
- No longer try to rely on a distinction between 'desktop' and 'mobile' devices. Mobile devices like the iPad Pro are essentially desktop like, and as mentioned above, a single device could be both touch and mouse enabled. It's not about the nature of the device, it's about the nature of the interaction.
Test Plan:
- Tapped "Hide Comment", "Reply" on an iPad Pro running iOS 9.2 and got single touch responses with no tooltips.
- Tried the same on an iPhone 6 running iOS 9.2.
- Hovered over the same on a regular desktop in Safari and saw tooltips. Clicked and saw regular reactions.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15310
Summary:
These columns were conflating `projectPHID` (the defualt project to add to the task) with `boardPHID` (the board the column appears on).
Separate them to fix the beahvior.
Test Plan: Used "Add Task" from dropdown menu of a milestone column on a parent project's workboard.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15242
Summary: Ref T4427.
Test Plan:
- Dragged a 17 XP task from "Hunting" to "Slain".
- Saw 17 XP move.
- Level up!
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4427
Differential Revision: https://secure.phabricator.com/D15237
Summary:
Ref T4900. Briefly:
- Much more layout and rendering is now done in Javascript.
- This should otherwise be identical to the behavior at HEAD, except that:
- editing a task and removing the current board from it no longer removes the task; and
- points still don't work.
However, this can now plausibly support realtime workboard updates and other complex state-based behaviors like points calculations in a future change.
Test Plan:
- Changed card covers.
- Moved cards.
- Sorted board by priority and natural.
- Added new cards.
- Edited cards in place.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15234
Summary:
Ref T4900. To eventually support realtime board updates, we need to be able to perform a board state update without the context of the action which caused it.
For example, if the server says "update card Y", we need to know what to do without being told "card Y was moved from column A to column B" explicitly. Currently, all the update code relies on knowing what happened and which nodes were affected.
This is only a small step forward, but starts making things a bit more independent and consistent.
Test Plan:
- Moved cards around.
- Changed card cover images.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15228
Summary:
Ref T4900. The root problem is that dragging stuff near the bottom of the board can cause jittery, jumpy behaviors.
Internal scrolling has changed the nature of this problem. Previously, the height of the board itself would jump around, but it's now fixed so the height of columns jumps around instead.
We could take the same approach and add a chunk to the bottom of each column when a drag starts, but this is really distracting visually since it's obvious to the user.
Instead, treat columns as infinitely tall (so dragging beneath them still counts as dragging to the bottom position).
Test Plan:
- View a board with a column taller than the screen (has a scrollbar).
- Drag a card to near the bottom position.
- Move the mouse down a little bit at a time, continuing toward the bottom of the page.
- Before patch: at some point, UI flips out and starts rapidly adding, scrolling, and removing the ghost.
- After patch: sensible behavior, ghost is in bottom position for all cursor locations.
Also works for dragging to the top.
(This leaves us with a little less dead space for cancelling drags, but you've still got the left menu, anything offscreen, and the escape key, which seems fine.)
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15227
Summary:
Ref T4900. This gets moves on the new stuff and cleans them up a little.
Two behaviors haven't been ported yet: height adjustment during drags (which is broken anyway with inner scroll) and updating point counts (coming soon).
Test Plan: Dragged cards around on a board, including top/bottom positions and normal/priority sort.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15226
Summary: Ref T4900. Continuing to move this over into a more structured approach.
Test Plan: Panned a workboard.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15225
Summary:
Ref T4900. Broadly, workboard state management is fairly ad-hoc now, which makes things like this (where some kind of edit affects global state) difficult:
- Updating points header to reflect a sum change after dragging a task.
- Changing progress bars after editing a task to change resolution or points value.
- Moving a card to the correct column after editing it and changing subprojects/iterations.
- Responding to real-time notifications about other users moving cards.
This begins rewriting the code in a way that can better accommodate these kinds of far-reaching state update.
This change just moves cover image stuff. I'll continue moving features one at a time until boards work better.
Test Plan: Updated some cover images.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15224
Summary:
Ref T4427.
- New config option for labels, enabling, etc., but no UI/niceness yet.
- When enabled, add a field.
- Allow nonnegative values, including fractional values.
- EditEngine is nice and Conduit / actions basically just work with a tiny bit of extra support code.
Test Plan:
- Edited points via "Edit".
- Edited points via Conduit.
- Edited points via stacked actions.
- Tried to set "zebra" points.
- Tried to set -1 points.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4427
Differential Revision: https://secure.phabricator.com/D15220
Summary: This scroll lock thing prevented both X and Y scrolling, but should only prevent Y scrolling. Dragging a card to the edge to scroll left/right is fine.
Test Plan: Scrolled a workboard left/right by dragging a card to the edge.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15213
Summary:
Ref T5240. For boards with a lot of columns and users without "shift + mousewheel" or a touchpad, allow click-drag on the board background to pan the board horizontally.
The `ew-resize` cursor cue might be a little too intense. If it's annoying, we could drop it and just leave this as a secret feature to discover.
Test Plan: Panned the board horizontally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5240
Differential Revision: https://secure.phabricator.com/D15211
Summary:
Ref T5240.
- Columns are fixed height.
- Columns scroll internally.
- Drag behaviors generally align with these column behaviors.
Test Plan: {F1099061}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5240
Differential Revision: https://secure.phabricator.com/D15209
Summary:
Currently, in Safari, if you drag an image onto a board to make it a cover file and then wave it around wildly a lot over differnent cards, it sometimes glitches out a bit and won't drop on them properly.
This appears to be because sequencing and delivery of dragenter/dragleave events isn't always totally ideal.
Instead, just cancel any existing drag when we get a new drag that targets a new drop target.
Test Plan:
- Opened a board with a bunch of cards.
- Dragged a file from my desktop onto the board.
- Waved it around wildly, hovering over many different cards.
- Before patch: sometimes cards under the cursor stopped highlighting properly.
- After patch: behavior seems correct and consistent.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15208
Summary: This was slightly more complex than I believed, but not too terrible.
Test Plan:
{F1096126}
- Also used some normal file uploaders to make sure I didn't break that.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15202
Summary:
Ref T10289. This probably doesn't cover everything but should do a little bit better.
Although we should mabye just exlude milestones from this menu completely?
Test Plan: {F1093937}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10289
Differential Revision: https://secure.phabricator.com/D15191
Summary:
Fixes T4136.
When listing projects in the "Visible To" selector control:
- Instead of showing every project you are a member of, show only a few.
- Add an option to choose something else which isn't in the menu.
- If you've used the control before, show the stuff you've selected in the recent past.
- If you haven't used the control before or haven't used it much, show the stuff you've picked and them some filler.
- Don't offer milestones.
- Also don't offer milestones in the custom policy UI.
Test Plan:
{F1091999}
{F1092000}
- Selected a project.
- Used "find" to select a different project.
- Saw reasonable defaults.
- Saw favorites stick.
- Tried to typeahead a milestone (nope).
- Used "Custom Policy", tried to typeahead a milestone (nope).
- Used "Custom Policy" in general.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4136
Differential Revision: https://secure.phabricator.com/D15184
Summary:
Ref T10010. These aren't perfect but I think (?) they aren't horribly broken.
- When a project is a parent project, destroy (as far as the user can tell) any custom columns.
- When a project has milestones, automatically generate columns on the project's workboard (if it has a workboard).
- When you move tasks between milestones, add the proper milestone tag.
- When you move tasks out of milestones back into the backlog, add the proper parent project tag.
- (Plenty of UI / design stuff to adjust.)
Test Plan:
- Dragged stuff between milestone columns.
- Used a normal workboard.
- Wasn't able to find any egregiously bad cases that did anything terrible.
{F1088224}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15171
Summary: No UI changes, just some search and replace for UI consistency.
Test Plan: Test person and object hovercards still work. UIExamples too.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15172
Summary:
Ref T5240. This probably has some bugs and doesn't quite work in Firefox (fine on boards, not quite on the task list -- some issue with body or document being special, I think).
I think this is close enough that we can throw it out there and see how users manage to break it, though. It's not worse than what we've got now? I think?
Test Plan:
dragged things near the edge of other things
they seemed to move around OK
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5240
Differential Revision: https://secure.phabricator.com/D10188
Summary:
Ref T5240.
- Add proper class when dropping cards.
- Add proper class when creating new cards.
- Make X-drag explicit so that it works if there's only one column.
- Stop tootips when dragging, resume them after dropping.
- Move CSS rule for consistency.
- Allow user to hit "Escape" to cancel an in-progress drag.
Test Plan:
- Dropped cards.
- Created new cards.
- X-dragged on a workboard with one column and a dashboard.
- Dragged over a tooltip (no tip), dropped, moused over tooltip (tip).
- Hit escape during a drag.
Reviewers: chad
Reviewed By: chad
Subscribers: cspeckmim
Maniphest Tasks: T5240
Differential Revision: https://secure.phabricator.com/D15163
Summary:
Ref T5240. Currently, when dragging nodes, we leave them where they are in the document and apply "position: relative;" so we can move them around on screen.
- Pros: All the CSS still works.
- Cons: Can't drag them outside the nearest containing element with "overflow: hidden;", many subtle positioning bugs with scrollable containers.
Instead, this diff leaves the thing we're dragging exactly where it is, clones it, and drags the clone instead.
- Pros: You can drag it anywhere. Seems to fix all the scrolling container problems.
- Cons: CSS which depends on a container class no longer works.
The CSS thing is bad, but doesn't seem too unreasonable to fix. Basically, we just need to put some `phui-this-is-a-workboard-card` class on the cards, and use that to style them instead of `phui-workboard-view`, and then do something similar for draggable lists.
Although we no longer need to drag cards to tabs with the current design, I think there's a reasonable chance we'll revisit that later. The current design also calls for scrollable columns, but there would be no way to drag cards outside of their current column with the current approach.
NOTE: This does not attempt to fix the CSS, so dragging is pretty rough, since the "clone" loses a number of container classes and thus a number of rules. I'll clean up the CSS in the next change.
Test Plan:
- Dragged stuff around on task lists, workboards, and sort lists (e.g., pinned applications) in Safari, Firefox and Chrome.
- Scrolled window and containers (workboards) during drag.
- Dragged stuff out of the workboard.
- Dragged stuff offscreen.
- CSS is funky, but I can no longer find any positioning or layout issues in any browser.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5240
Differential Revision: https://secure.phabricator.com/D15160
Summary: Ref T5240. This property does nothing.
Test Plan: Search, drag a card around.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5240
Differential Revision: https://secure.phabricator.com/D15159
Summary:
Ref T5240. Currently, we calculate drag positions assuming the "ghost" element is not present (it isn't, usually), then adjust them while dragging to account for the ghost.
However, this fails after scrolling: we dirty the cache, but the ghost //is// present. We continue adjusting for it, but essentially double-adjust. This leads to scroll positions being about 80-ish px off from where they should be.
Test Plan:
- Begin dragging a task in a long task list.
- While dragging, use mousewheel to scroll to the bottom of the list.
- Drag task downward through the list.
- Before fix: ghost is off by, like, an inch or so.
- After fix: ghost position is accurate to cursor position.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5240
Differential Revision: https://secure.phabricator.com/D15157
Summary:
Mostly, this has just been sitting in my sandbox for a long time. I may also touch some charting stuff with subprojects/milestones, but don't have particular plans to do that.
D3 seems a bit more flexible, and it's easier to push more of the style logic into CSS so you can fix my design atrocities. gRaphael also hasn't been updated in ~3+ years.
Test Plan:
{F1085433}
{F1085434}
Reviewers: chad
Reviewed By: chad
Subscribers: cburroughs, yelirekim
Differential Revision: https://secure.phabricator.com/D15155
Summary:
Fixes T10229. Broadly:
- When the user hovers over a line number or inline comment, we update the yellow reticle to highlight the relevant lines. Specifically, this is in response to a `mouseover` event.
- On touch devices, touches fire `mouseover` and if you mutate the DOM inside the event, the device aborts the touch.
To remedy this:
- Distingiush between mouse-originated and touch-originated cursor events.
- We do this, roughly, by setting a flag when we see "touchstart", and clearing it when we see the second copy of any unique cursor event.
- This method is complex, but should be robust to any implementation differences between devices (for example, it will work no matter which order the events are fired in).
- This method should also produce the correct results on weird devices that have both mouse-devices and touch-devices available for cursor input.
- When we see a touch-originated `mouseover` or `mouseout`, don't mutate the DOM.
- Put an extra DOM mutation into the `click` event to improve highlighting behavior on touch devices.
Test Plan:
- In iOS Simulator (4s, iOS 9.2), clicked various inline actions ("Reply", "Hide", "Done", "Cancel", line numbers, etc). Got responses after a single touch.
- Verified hover + click behavior on a desktop.
- Logged and examined a bunch of events as a general sanity check.
Reviewers: chad
Reviewed By: chad
Subscribers: aljungberg
Maniphest Tasks: T10229
Differential Revision: https://secure.phabricator.com/D15136
Summary: Ref T10229. Fixes T9969. We make a decision about 1up vs 2up pretty early, and sometimes the viewport size reads as larger than the device, so we incorrectly select 2up when the proper setting would be 1up.
Test Plan:
I can reproduce this by, e.g., reloading a lot on an iPhone 4s in iOS Simulator running iOS 9.2. Sometimes it picks 2-up. I added logging to show that the viewport dimension read was the issue.
After this change, it always selects 1-up (`window.screen.availWidth` is defined and sensible on the device).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9969, T10229
Differential Revision: https://secure.phabricator.com/D15135
Summary: Ref T10163. These are almost certainly not username/project characters, and are fairly likely to be `@{...}` Diviner references.
Test Plan: Typed `@{...`, no more autocomplete.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15110
Summary:
The text sliding around feels a bit jank to me. Instead, here's an attempt at a three-part effect:
- Fade out the content of the menu (first quarter of the animation).
- Shrink the menu (half the animation).
- Fade the menu content back in (final quarter).
This isn't perfect, but feels less weird to me since the text doesn't dance?
Test Plan: clickey clickey
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15098
Summary:
Fixes T10190. This is still a touch weird (newly typed tokens lose icons when copied) but basically works correctly. Saving/editing rules is fine, just some minor display glitching.
Fixing the icon thing is a little more involved.
Test Plan: Swapped Herald tokenizer fields around saw values (approximately) preserved.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10190
Differential Revision: https://secure.phabricator.com/D15077
Summary:
Ref T10054. This fix is a little rough but the "right" fix involves a ton of rewriting to `AphrontSideNavFilterView` and I don't want to open that can of worms up yet.
Specifically, the problem is:
- we build the menu in order to populate the mobile/application menu;
- as a side effect of building the menu (not rendering the menu), we initialize the menu collapse/expand behavior;
- but we never actually render the menu, so the `JX.$()` call fails.
The right fix would be to initialize the behavior only when we render the menu, but then `AphorntSideNavFilterView` would need to know about profile menu behaviors. It probably should some day, but I think today is not that day.
Test Plan: Set icons on a link on a profile menu.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15073
Summary:
Ref T10054. I think this gets everything except:
- circles on icons;
- I spent ~15 minutes poking at animations but wasn't able to get anything that looked reasonable whatsoever.
Test Plan:
- Collapsed menus.
- Expanded menus.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15056
Summary: These are old project image choices, remove and only go with FontAwesome related images.
Test Plan: Project -> Edit Picture -> Save
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15051
Summary:
Ref T10163. If you right-click the suggestion menu, just eat it. I don't think we can really choose a different behavior reasonably, or that users have any reason to do this.
I'm leaving "clicking the header dismisses it", I think that behavior is fine and reasonable.
Test Plan: Control-clicked a suggestion menu, didn't trigger a suggestion.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15042
Summary: Ref T10163. When a user autocompletes, add a space for them, unless they already added a comma, colon, or space themsevles.
Test Plan: Autocompleted `@dog`, got `@dog `. Autocompleted `@epriestley,` got `@epriestley,`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15041
Summary:
Ref T10163. Currently, we don't activate on indented lines, but were too aggressive about this, and would not activate on lines like ` - Hey, @user...`, where we should.
Instead, don't activate on indented lines if there's only an indent (i.e., `#` probably means enumerated list).
Also, if results don't have autocompletes (rare but possible with projects missing slugs), improve behavior.
Test Plan:
- Typed ` #a`, got no autocomplete.
- Missing slug thing is a pain to test locallly, `#1 z z z z` reproduces in production. I'll just verify it there.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15040
Summary:
Ref T10163. When we think the user has finished typing a word (because they typed a space, period, or other similar characters) and nothing else they might type could possibly change the outcome (usually because the words they have typed already match nothing), just deactivate the autocomplete.
As a special case, if the word they have typed already select exactly one result, //and// they have already typed exactly that result, assume they just typed it from memory and deactivate.
Test Plan:
- Typed `@dog qwer zxcv` and saw autocomplete deactivate on the space before `z` (on my local install, `@dog` is ambiguous but `@dog qwer` matches nothing).
- Typed `@epriestley ` and saw autocomplete deactivate on space.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15039
Summary: Ref T10163. In cases like Conpherence, the autocompleter can currently render off the bottom of the screen. Put it above if it would be offscreen.
Test Plan: {F1062286}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15038
Summary: Ref T10163. Activate on `@d`, not just `@`. Note that if you type `@d` and then press delete once so you're left with `@`, we stay active (and show the "type a username" hint).
Test Plan:
- Typed `@`, no completer.
- Typed `d`, got completer.
- Typed delete, still had completer, now showing hint prompt.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15037
Summary:
Ref T10163. Some characters are almost certainly punctuation or markup rather than autocomplete requests. Immediately cancel any active autocomplete when the user types one of these.
Note that some of these are also suffix characters. If you type `@dog,`, you have until the next character to decide you actually mean to autocomplete. Once you type something else we deactivate.
If you type `#dog#` or `##`, we deactivate immediately.
Test Plan: Typed `@dog#`, etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15036
Summary: Ref T10163. This allows activation in blockquotes or after `NOTE:`, for consistency.
Test Plan: Typed `>@dog`, etc., got autocomplete.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15035
Summary:
Ref T10163.
- If a user types an autocomplete character ("@" or "#") and then a space, deactivate immediately (probably an ordered list).
- If a user types an autocomplete character indented on a line with no other prior text, don't activate (probably an ordered list or code block).
Test Plan:
Typed:
- `# `, saw immediate deactivation.
- ` #`, saw no activation in the first place.
- `#x`, saw activation.
- `asdf #x`, saw activation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15033
Summary: Ref T10163. I would still sometimes not get a replacement after clicking with the delayed blur. This seems to fix the issue more consistently: instead of listening for a click event (which fires after the blur), listen for a mousedown event (which fires before the blur).
Test Plan: Observed consistent selection via mouse locally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15032
Summary:
Ref T10163.
- If you click a result, we get a blur before your click hits, and deactivate before the click can work. Instead, wait before responding to blur.
- Use the standard sort handler which puts unixnames over human names. Also use the standard filter which deals with disabled users not matching unless they're the only match.
Test Plan:
- Clicked a result, got a replacement.
- Named myself "dog dog", typed "@dog", user "@dog" was now first match despite me being "@admin".
- Used normal typeaheads to make sure I didn't break sort handler.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10163
Differential Revision: https://secure.phabricator.com/D15031
Summary: Ref T3725. This probably has 900,000 bugs. This will need updates for subprojects/milestones.
Test Plan:
- Tested very gently in Safari, Firefox and Chrome.
- Reasonable inputs appear to work.
- Clicking, escape, tab, return, arrow keys work OK?
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T3725
Differential Revision: https://secure.phabricator.com/D15029
Summary: Ref T10054. Allows users to drag menu items to reorder them.
Test Plan: Reordered a project menu.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15011
Summary: Fixes T10139. This clarification seems reasonable to me.
Test Plan:
- Viewed a revision with context.
- Clicked "Show All Context".
- Saw "All Context Shown".
{F1060624}
{F1060625}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10139
Differential Revision: https://secure.phabricator.com/D15009
Summary: Fixes T10116.
Test Plan:
- Prior to patch: Control/Command + Enter submitted form but ignored actions.
- After patch: verifid command + enter submits actions.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10116
Differential Revision: https://secure.phabricator.com/D14991
Summary:
Ref T10010. Ref T5819. General alignment of the stars:
- There were some hacks in Conduit around stripping `fa-...` off icons when reading and writing that I wanted to get rid of.
- We probably have room for a subtitle in the new heavy nav, and using the icon name is a good starting point (and maybe good enough on its own?)
- The project list was real bad looking with redundant tag/names, now it is very slightly less bad looking with non-redundant types?
- Some installs will want to call Milestones something else, and this gets us a big part of the way there.
- This may slightly help to reinforce "tag" vs "policy" vs "group" stuff?
---
I'm letting installs have enough rope to shoot themselves in the foot (e.g., define 100 icons). It isn't the end of the world if they reuse icons, and is clearly their fault.
I think the cases where 100 icons will break down are:
- Icon selector dialog may get very unwieldy.
- Query UI will be pretty iffy/huge with 100 icons.
We could improve these fairly easily if an install comes up with a reasonable use case for having 100 icons.
---
The UI on the icon itself in the list views is a little iffy -- mostly, it's too saturated/bold.
I'd ideally like to try either:
- rendering a "shade" version (i.e. lighter, less-saturated color); or
- rendering a "shade" tag with just the icon in it.
However, there didn't seem to be a way to do the first one right now (`fa-example sh-blue` doesn't work) and the second one had weird margins/padding, so I left it like this for now. I figure we can clean it up once we build the thick nav, since that will probably also want an identical element.
(I don't want to render a full tag with the icon + name since I think that's confusing -- it looks like a project/object tag, but is not.)
Test Plan:
{F1049905}
{F1049906}
Reviewers: chad
Reviewed By: chad
Subscribers: 20after4, Luke081515.2
Maniphest Tasks: T5819, T10010
Differential Revision: https://secure.phabricator.com/D14918
Summary:
Fixes T9323. Two minor fixes:
- On the first commit, don't render a downward line.
- Clean up a 1px spacing issue that had cropped up a while ago when we added icons or something, I think.
Test Plan:
Before:
{F1057248}
After:
{F1057249}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9323
Differential Revision: https://secure.phabricator.com/D14974
Summary: Ref T10004. This control doesn't disable visually or behaviorally, e.g. when locked in an EditEngine configuration.
Test Plan:
- Locked field for Projects.
- Reviewed form in EditEngine.
- Created/edited a project.
- Swapped default.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10004
Differential Revision: https://secure.phabricator.com/D14911
Summary: Ref T10004. This primarily supports moving Phame to EditEngine.
Test Plan: {F1045166}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10004
Differential Revision: https://secure.phabricator.com/D14887
Summary: I'll revert this within 24 hours, before I promote.
Test Plan: Had completely functional but greatly enhanced Phabricator experience in Firefox, Safari and Chrome.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14884
Summary: Ref T8980. Previously, if you had like `T123T123T123` and waved your mouse over them, we wouldn't move the card. Now, move the card.
Test Plan: Waved mouse. Saw the card move.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8980
Differential Revision: https://secure.phabricator.com/D14881
Summary: Ref T8980. This calculation was not quite right and you could sneak one off screen if you tried carefully.
Test Plan: Couldn't sneak one off screen anymore.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8980
Differential Revision: https://secure.phabricator.com/D14880
Summary:
Ref T8980. Move away from events to EngineExtensions.
This also simplifies hovercards a bit:
- Removes tasks from revision cards.
- Removes blockers/blocked from task cards.
- Removes "Send Message" from user cards.
These mostly felt cluttery to me. Open to arguments to retain them. I think we can make better use of the space, though (e.g., flags, projects + board columns).
Test Plan:
- Viewed people, task, revision, commit and project hovercards.
{F1043256}
{F1043257}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8980
Differential Revision: https://secure.phabricator.com/D14878
Summary:
Ref T10004. This might be a little too funky or magical, but is probably not necessary too often and easier than doing new layout with the CSS.
Also make the desktop icons a little meatier.
Test Plan: Swiped things away on mobile. Clicked things away on desktop.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10004
Differential Revision: https://secure.phabricator.com/D14857
Summary:
Fixes T1895. Now that we have on-demand prviews, we can use them on mobile. On mobile:
- don't show live previews;
- only save drafts every 10 seconds.
Also, show fewer remarkup buttons on mobile to try to make sure the more important ones (preview, e.g.) fit.
Test Plan:
- Made window narrower and wider to trigger preview/no-preview behavior.
- Used DarkConsole to verify request rate.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T1895
Differential Revision: https://secure.phabricator.com/D14856
Summary:
Ref T3967. This gives us a reasonable baseline for doing remarkup previews inline in all contexts, and works in weird/constrained context including:
- inline comments;
- conpherence; and
- custom fields.
It would be nicer to go beyond this in contexts like Phame posts, but this is a start, at least.
Test Plan:
{F1040877}
{F1040878}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T3967
Differential Revision: https://secure.phabricator.com/D14855
Summary:
Fixes T10039. We add text to textareas in two cases:
- Users clicking assitance buttons in Remarkup text areas.
- Drag-and-drop file uploads.
In case (1), it makes sense to highlight the text (it shows the user what we inserted, and lets them undo the action easily if it isn't what they wanted).
In case (2), it does not. Users almost never want to delete or edit a file reference. It is slightly nice to have the reference as a visual callout, but I don't think this is a big deal.
Change the behavior so that we highlight only for remarkup buttons, not for drag-and-drop files.
Test Plan:
- Clicked an "isnert quote" button on remarkup assist area, got highlighted example text.
- Dragged and dropped a file, got text inserted with no highlight.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10039
Differential Revision: https://secure.phabricator.com/D14851
Summary: Fixes T9871. Ref T10004. These won't win any awards but it fixes them being incredibly weird and confusing.
Test Plan:
{F1029090}
- Tried to use controls, got reasonable behavior.
- Used normal controls to make sure I didn't break anything.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9871, T10004
Differential Revision: https://secure.phabricator.com/D14814
Summary:
Ref T10004. After a user logs in, we send them to the "next" URI cookie if there is one, but currently don't always do a very good job of selecting a "next" URI, especially if they tried to do something with a dialog before being asked to log in.
In particular, if a logged-out user clicks an action like "Edit Blocking Tasks" on a Maniphest task, the default behavior is to send them to the standalone page for that dialog after they log in. This can be pretty confusing.
See T2691 and D6416 for earlier efforts here. At that time, we added a mechanism to //manually// override the default behavior, and fixed the most common links. This worked, but I'd like to fix the //default// beahvior so we don't need to remember to `setObjectURI()` correctly all over the place.
ApplicationEditor has also introduced new cases which are more difficult to get right. While we could get them right by using the override and being careful about things, this also motivates fixing the default behavior.
Finally, we have better tools for fixing the default behavior now than we did in 2013.
Instead of using manual overrides, have JS include an "X-Phabricator-Via" header in Ajax requests. This is basically like a referrer header, and will contain the page the user's browser is on.
In essentially every case, this should be a very good place (and often the best place) to send them after login. For all pages currently using `setObjectURI()`, it should produce the same behavior by default.
I'll remove the `setObjectURI()` mechanism in the next diff.
Test Plan: Clicked various workflow actions while logged out, saw "next" get set to a reasonable value, was redirected to a sensible, non-confusing page after login (the page with whatever button I clicked on it).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10004
Differential Revision: https://secure.phabricator.com/D14804
Summary:
Ref T9992. This is a step on the path to getting EditEngine working in Badges, Projects and Calendar.
This doesn't add a new `EditField` for icons yet, just standardizes the old stuff. New stuff is more general and I saved 150 lines of code.
I put the endpoint in Files because the similar "choose a profile picture" endpoint will definitely go there, and this endpoint might eventually feature, like, "draw your own icon~~" or something.
Test Plan:
- Created events, projects and badges with custom icons.
- Edited events, projects and badges, changing their icons.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9992
Differential Revision: https://secure.phabricator.com/D14799
Summary:
Ref T9908. Fixes T6205.
This is largely some refactoring to improve the code. The new structure is:
- Each EditField has zero or one "submit" (normal edit form) controls.
- Each EditField has zero or one "comment" (stacked actions) controls.
- If we want more than one in the future, we'd just add two fields.
- Each EditField can have multiple EditTypes which provide Conduit transactions.
- EditTypes are now lower-level and less involved on the Submit/Comment pathways.
Test Plan:
- Added and removed projects and subscribers.
- Changed task statuses.
- In two windows: added some subscribers in one, removed different ones in the other. The changes did not conflict.
- Applied changes via Conduit.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6205, T9908
Differential Revision: https://secure.phabricator.com/D14789
Summary:
Fixes T9995. I think letting users customize slugs is not a hugely compelling as a product feature, and this fixes the issue with slugs that have "/" characters in them and makes the move to EditEngine easier since I don't have to deal with the weird JS thing.
Instead, just generate slugs automatically. No more JS, no more separate field, things automatically update if you rename a blog, and now that URIs have IDs in them the old URI will still work after a rename.
Test Plan:
- Applied migration.
- Created new posts.
- Edited existing posts.
- Visited various posts.
- Created a post with a bunch of "/" in the title, things still worked fine.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9995
Differential Revision: https://secure.phabricator.com/D14792
Summary:
Ref T9132. Ref T9908. Puts reordering UI in place:
- For create forms, this just lets you pick a UI display order other than alphabetical. Seems nice to have.
- For edit forms, this lets you create a hierarchy of advanced-to-basic forms and give them different visibility policies, if you want.
Test Plan:
{F1017842}
- Verified that "Edit Thing" now takes me to the highest-ranked edit form.
- Verified that create menu and quick create menu reflect application order.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132, T9908
Differential Revision: https://secure.phabricator.com/D14704
Summary:
Fixes T7848. @jasonfsmitty discussed an issue in great detail there and in D14359, and I completely missed it. Specifically:
- If you save a "Change status to: Open" rule in Maniphest, and then edit it again, the token shows "Unknown Object (???)" instead of the correct token.
- That's because loadHandles() has no idea what to do with the value "open", since it's not a real PHID.
The way we render tokenizer tokens in Herald is quite hacky right now. Fortunately, I wrote a //slightly// better way for EditEngine yesterday or the day before. Use the slightly better way to fix the issue with D14359.
This could still be better than it is, but the badness is mostly hidden now and can be cleaned up later without impacting anything.
Test Plan: Edited a Herald rule with projects and status changes, saw proper tokens.
Reviewers: chad
Reviewed By: chad
Subscribers: jasonfsmitty
Maniphest Tasks: T7848
Differential Revision: https://secure.phabricator.com/D14682
Summary:
Ref T9132. Fixes T4580. Thhat might actually have been fixed a while ago or something since it describes a buggy/bad interaction which doesn't reproduce for me at HEAD.
This saves and restores all the stacked actions (subscribers, projects, etc) so that you don't lose anything if you close a window by accident.
Test Plan:
Added a bunch of actions in various states, reloaded the page, draft stuck around.
Submitted form, actions didn't stick around anymore.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4580, T9132
Differential Revision: https://secure.phabricator.com/D14675
Summary:
Ref T9132. We currently have an old preview/draft behavior and a new actions behavior.
Let the actions behavior do drafts/previews too, so we can eventually throw away the old thing.
This is pretty much just copying the old behavior into the new one, but with a few tweaks. The major change is that we submit all the stacked actions behavior now, so the preview reflects everything the change will do (and, soon, we can save it in the draft in a consistent way).
Also includes one hack-fix that I'll clean up at some point.
Test Plan: Added a bunch of stacked actions and observed meaningful previews.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14672
Summary:
Ref T9132. This is kind of a mess because the tokenizer rewrite left rendering tokenizers in Javascript a little rough. This causes bugs like icons not showing up on tokens in the "Policy" dialog, which there's a task for somewhere I think.
I think I've fixed it enough that the beahavior is now correct (i.e., icons show up properly), but some of the code is a bit iffy. I'll eventually clean this up properly, but it's fairly well contained for now.
Test Plan:
- Reassigned a task.
- Put a task up for grabs.
- No reassign on closed tasks.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14669
Summary: Ref T9132. Supports selects in stacked actions and adds "Change Status" + "Change Priority".
Test Plan: Changed status and priority from stacked actions.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14667
Summary: Ref T9132. Shhh this never happened shhhhhhh.
Test Plan: Selected multiple actions, saw them add at the bottom.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14664
Summary:
Ref T9132. Like D14659, I'll hold this until after the cut.
This swaps commenting in Maniphest over to EditEngine / stackable actions. New code doesn't have parity yet, although none of the things we're missing should technically be //strictly mandatory//. There's a list inline. I'll restore these in the next diffs.
Briefly -- comments, subscribers and projects work. Status, owners and priority do not yet.
Test Plan:
- Made comments and added subscribers and projects.
- Read through the old code to look for missing features and tried to document them all.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14663
Summary: Ref T9132. This still has a lot of rough edges but the basics seem to work OK.
Test Plan: {F1012627}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14653
Summary: Reuse PHUIMarkupPreviewView in Phame for consistency, less custom code. Also, doesn't work (JS issue).
Test Plan: New Post, Edit Post, Save Post
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14552
Summary:
Ref T9132. This just makes edited forms do //something//, albeit not anything very useful yet.
You can now edit a form and:
- Retitle it;
- add a preamble (instructions on top of the form); and
- reorder the form's fields.
Test Plan:
{F974632}
{F974633}
{F974634}
{F974635}
{F974636}
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14503
Summary:
Fixes T9675.
Fixes the calculation for the difference between the first day of the month and the first day of the week. It was previously possible for this to be negative, which caused the subsequent loop to hang the browser.
Test Plan:
- Set week to start on Sunday. Observed that the calendar still renders fine.
- Set week to start on Monday. Observed that the browser no longer hangs on November 2015.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T9675
Differential Revision: https://secure.phabricator.com/D14409
Summary:
Ref T182. Replace the total mess we had before with a sort-of-reasonable element.
This automatically updates using "javascript".
Test Plan:
{F901983}
{F901984}
Used "Land Revision", saw the land status go from "Waiting" -> "Working" -> "Landed" without having to mash reload over and over again.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14314
Summary:
Ref T9524. Because fetching the last time files were modified in Diffusion can be slow, we bring it in over Ajax.
The logic to fetch and paint the table is kind of fragile because there are two different definitions of the columns right now and we break in a bad way if they differ.
In particular, calling `diffusion.updatecoverage` can populate a "lint commit" for a repository, which tries to generate lint information in one of the views (but not the other one).
In the longer run I think we're removing some of the concepts here and this rendering should be rebuilt to not have two separate column definitions, but just make it degrade gracefully for now since those are larger changes.
Test Plan:
Reproduced the issue in T9524 by calling `diffusion.updatecoverage` on a repostiory. Specifically, this has a side effect of creating a "lint commit" which triggers a "lint" column in this table, sort of.
Applied this patch, got a clean render.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9524
Differential Revision: https://secure.phabricator.com/D14243
Summary: Fixes T8572. Ideally we would probably just permit this, but clean up the behavior until the day arrives when inline code is actually rewritten.
Test Plan:
- Tried to launch editors in Differential and Diffusion while comments were already open.
- Verified that "Jump to inline" works in both cases.
{F788008}
{F788009}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8572
Differential Revision: https://secure.phabricator.com/D14094
Summary:
Ref T9324. When you upload a normal file, we call `willUpload` and then `didUpload`.
When you upload a chunked file, we never call `willUpload`. This can get things out of sync. Make sure we invoke this event for both chunked and non-chunked uploads.
Test Plan: Got cleaner behavior (redirect after all uploads finish) in new Phacility file upload area.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9324
Differential Revision: https://secure.phabricator.com/D14083
Summary: Fix T8710. I had hopes of doing something cleaver with `highlighted` (Like trying to understand `foo.bar` when clicking `bar`, but I obviously didn't do it.
Test Plan: ctrl-click.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: joshuaspence, epriestley, gena2x, Korvin
Maniphest Tasks: T8710
Differential Revision: https://secure.phabricator.com/D13550
Summary:
Fixes T8501.
When losing focus while holding ctrl, we never get a key-up event; ctrl-f/d/tab make the browser tab lose focus.
So treat 'blur' (unfocus) as if the user released ctrl.
Test Plan: ctrl-f/ctrl-d/ctrl-tab, ctrl-click-outside-of-window, and move mouse over the content - see no help suggestions.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Maniphest Tasks: T8501
Differential Revision: https://secure.phabricator.com/D13260
Summary: Ref T6920, This just removes the old voting UI from Ponder.
Test Plan: Visit a Question, no voting UI
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T6920
Differential Revision: https://secure.phabricator.com/D13827
Summary:
Ref T8726. Herald actions are technically sort-of modular already, but make them more aggressively modular similar to `HeraldField`.
I plan to obsolete and replace `HeraldCustomAction`.
Test Plan: Saw actions in nice groups; created and ran a "Do Nothing" action. Transcripts are a bit rough for now.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13646
Summary:
Ref T8726. Some adapters now have a large number of fields, and we lost the sort-of-human-readable implicit ordering when fields were modularized.
Instead, group and sort fields.
Test Plan: {F603066}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13619
Summary: Ref T8726. This gets rid of all the `VALUE_*` constants and lets Fields provide arbitrary typeaheads without upstream/JS changes.
Test Plan: Used all tokenizers. Used "Another Herald Rule". Grepped for all removed constants.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13616
Summary:
Ref T8726. I'm primarily trying to modularize tokenizer values so we don't have to update JS to add a new one.
This is ultimately the blocker for "select" custom fields working in Herald.
This inches us toward that. I'm //not// modularizing conditions or control types in this round, but hope to end up with hard-coded conditions (which are highly general and very rarely change), hard-coded control types (which are also highly general and very rarely change) and completely modular fields and values (which have mid-to-low generality and change frequently).
Test Plan: Used UI to interact with "none", "text", and new-style "select" controls. No actual support for tokenizers yet.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13613
Summary: Ref T8099, Fixes T8338. This allows re-ordering of Maniphest Tasks in the redesign. Somehow seems more fragile, but I couldn't break anything with it.
Test Plan: Try ordering into first position after header, last position, changing priority outright, everything I can drag.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8099, T8338
Differential Revision: https://secure.phabricator.com/D13487
Summary: Fixes T8605, Popup datepicker should respect user preferred week start day
Test Plan: Edit event, open datepicker, calendar weeks should start on Sunday by default, and another day, if specified in User Preferences.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8605
Differential Revision: https://secure.phabricator.com/D13419
Summary:
We use a non-standard way to invoke the edit dialogue (title, picture, etc) via the crumb. Stop doing that and instead use the widget technology to invoke the dialogue.
This requires making the widget handling code a bit more nuanced as nothing has wanted to pop a dialogue before. I plan to clean this up as I add the action to "Mark as Favorite" to the UI. In particular, I want to stop rendering the un-used DOM and make a workflow-based widget action a property as opposed to something hardcoded. This may be too ambitious depending on how similar these workflows are....
This also updates the ThreadSearchEngine to be a bit more modern. Additionally, go through making some user-facing strings a bit more sensical.
Test Plan: changed settings from conpherence full and durable column successfully.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D13449
Summary:
Ref T8488, T8469, T8485.
This is done in regards to T8488 as far as users are concerned. There's still some classes, and etc. that should be re-named probably. T8469 and T8485 are basically moot now though.
Rather than having "Send Message" exposed, just expose "Create Room". Users get the full form. One change is "title" is now required.
This diff removes the concept of "isRoom" entirely.
Test Plan: Verifed a user with no conpherences had sensible data in both column view and full conpherence view. Created rooms with various policies and things worked well.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: chad, epriestley, Korvin
Maniphest Tasks: T8469, T8485, T8488
Differential Revision: https://secure.phabricator.com/D13351
Summary:
Ref T8637. This does nothing interesting, just has empty scaffolding for a bulk job queue.
Basic idea is that when you do something like a batch edit in Maniphest, we:
- Create a BulkJob with all the details.
- Queue a worker to start the job.
- Send you to a progress bar page for the job.
In the background:
- The "start job" worker creates a ton of Task objects, then queues worker tasks to do the work.
In the foreground:
- Fancy ajax animates the progress bar and it goes wooosh.
In general:
- Big jobs actually work.
- Jobs get logged.
- You can monitor jobs.
- Terrible junk like T8637 should be much harder to write and much easier to catch and diagnose.
Test Plan:
No interesting code/beahavior yet. Clean `storage adjust`.
{F526411}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8637
Differential Revision: https://secure.phabricator.com/D13392
Summary: Ref T8095. This weird grey table has no remaining callsites and can be removed.
Test Plan: Grepped for symbols.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8095
Differential Revision: https://secure.phabricator.com/D13379
Summary:
Fixes T4139. Adds a "Desktop Notifications" panel to settings. For now, we start with "Send Desktop Notifications Too" functionality. We can try to be fancy later and only send desktop notifications if the web app doesn't have focus, etc.
Test Plan:
Made some comments as a test user on a task and got purdy desktop notifications using Chrome. Then did it again with Firefox.
Played around with permissions form with Chrome and got helpful information about what was up. Played around with Firefox and got similar results, except canceling the dialogue didn't invoke my handler code somehow. Oh Firefox!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: rbalik, tycho.tatitscheff, joshuaspence, epriestley, Korvin
Maniphest Tasks: T4139
Differential Revision: https://secure.phabricator.com/D13219
Summary: Fixes T8565, Quoted text remarkup should be smart enough to know when to add a '>' and when to add '> '
Test Plan: Open an object with remarkup comments, add 'quote', select that text click the quote button in the remarkup menu, text should become '> quote'. Select and click again, text should become '>> quote'.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8565
Differential Revision: https://secure.phabricator.com/D13334
Summary: Ref T8362, Date controls should respect user time preferences
Test Plan: Set user time preference to 24-hour format, create an event, type 23 in time input, 23:00 should be suggested. Saveing a 24-hour format time should save correctly.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8362
Differential Revision: https://secure.phabricator.com/D13291
Summary: Ref T8362, Add date format preference and respect it in date selection controls
Test Plan: Set date format preference in the user settings panels, create new event, select new start date in the correct format.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: jasonrumney, eadler, epriestley, Korvin
Maniphest Tasks: T8362
Differential Revision: https://secure.phabricator.com/D13262
Summary:
Ref T5681. Policy rules can now select objects they can apply to, so a rule like "task author" only shows up where it makes sense (when defining task policies).
This will let us define rules like "members of thread" in Conpherence, "subscribers", etc., to make custom policies more flexible.
Notes:
- Per D13251, we need to do a little work to get the right options for policies like "Maniphest > Default View Policy". This should allow "task" policies.
- This implements a "task author" policy as a simple example.
- The `willApplyRule()` signature now accepts `$objects` to support bulk-loading things like subscribers.
Test Plan:
- Defined a task to be "visible to: task author", verified author could see it and other users could not.
- `var_dump()`'d willApplyRule() inputs, verified they were correct (exactly the objects which use the rule).
- Set `default view policy` to a task-specific policy.
- Verified that other policies like "Can Use Bulk Editor" don't have these options.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5681
Differential Revision: https://secure.phabricator.com/D13252
Summary: Ref T8498. This editor is an artifact of the Old World at this point, but it still works fine.
Test Plan: Moved tasks between spaces using the batch editor.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8498
Differential Revision: https://secure.phabricator.com/D13249
Summary: Ref T8498. Allow Herald rules to act on the Space which contains an object.
Test Plan:
- Wrote a "Space is any of..." rule, created tasks that matched and failed the rule.
- Also created a Pholio rule with the "Space..." condition.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8498
Differential Revision: https://secure.phabricator.com/D13242
Summary: Fixes T8489. Regression in D13058. Re-write this so a) works and b) works as well cross browser as possible. (big guess on b)
Test Plan: visited /Z1 vs /Z1?settings and saw people widget vs settings widget as respective defaults.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8489
Differential Revision: https://secure.phabricator.com/D13228
Summary: Fixes T6713. Though I've said that before. =D Looks like this handler wasn't upgraded earlier and was still updating the DOM; removing the DOM updating code and let the central spot handle everything and this works fine.
Test Plan: open up two browsers with durable column on same room. send messages in browser a and observe 1 copy of each message showing up in browser b. send messages in browswer b and observe one copy in browser a. browser a was chrome and browser b was firefox.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T6713
Differential Revision: https://secure.phabricator.com/D13214
Summary: Fixes T8458, Show informative errors when attempting to set a recurrence end date on a non-recurring event.
Test Plan: Create new event, set recurrence end date via date-picker without setting the "is recurring" checkbox, and attempt to save. Should get error saying there cannot be a recurrence end date on a non-recurring event.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T8458
Differential Revision: https://secure.phabricator.com/D13192
Summary: Ref T8099, hashtag#yolo. Adds back the original gradients plus a 'light' theme. Unclear which should be default, but we can play with it until a decision needs to be made.
Test Plan: Change colors a lot, turn on durable column.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8099
Differential Revision: https://secure.phabricator.com/D13146
Summary: Ref T8357, DRAFT, recurring events need optional end dates
Test Plan: Edit recurring event, set end date, save, recurring ghosts should not generate after end date
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8357
Differential Revision: https://secure.phabricator.com/D13088
Summary:
Refs T8302.
V1 of the implementation. This replaces the previous mode, but I guess there's no real reason we can't have
some symbols always clickable and the rest require modifier.
I'm also a little concerned about discoverability; Holding down ctrl/cmd will make the cursor change, so there's
some hint that something might be up, but that's probably not obvious enough.
Test Plan:
Tested in diffusion and differential and differential comments on:
- Windows/Chrome,
- Windows/IE 11
- LInux/Firefox 38
- Mac/Chrome
- Mac/Safari
Reviewers: chad, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley, joshuaspence
Maniphest Tasks: T8302
Differential Revision: https://secure.phabricator.com/D13034
Summary: Fixes T8329. I was able to figure out a reasonable way to have the full conpherence default to the email settings panel. I think this is cleaner than making things a dialogue as I rambled about in the description for T8329.
Test Plan: using /bin/mail to verify correct email links were generated for conpherence notifications and maniphest (general) notifications.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8329
Differential Revision: https://secure.phabricator.com/D13058
Summary: Fixes T7696.
Test Plan: hit the quote button with no text - it worked. highlighted some text and hit the quote button - it worked. hit the list item button with no text - it worked. hit the list item button with text selected - it worked
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7696
Differential Revision: https://secure.phabricator.com/D13060
Summary: Ref T8099. We removed the background column, so this JS wasn't able to fire and make the filetree movable.
Test Plan: Set Filetree on, resize it. Scroll through a diff.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8099
Differential Revision: https://secure.phabricator.com/D13048
Summary: Fixes T8328. Somewhere along the line we stopped posting to the server with no text. Make sure if the action is join_room that we ping the server even if no text is specified.
Test Plan: tried to send an empty message and failed; nothing happened when I clicked. tried to join a room with an empty message and it worked
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8328
Differential Revision: https://secure.phabricator.com/D13041
Summary:
Ref T7447. Implements per-viewer comment hiding. Once a comment is obsolete or uninteresting, you can hide it completely.
This is sticky per-user.
My hope is that this will strike a better balance between concerns than some of the other approaches (conservative porting, summarization, hide-all).
Specifically, this adds a new action here:
{F435621}
Clicking it completely collapses the comment into a small icon on the previous line, and saves the comment state as hidden for you:
{F435626}
You can click the icon to reveal all hidden comments below the line.
Test Plan:
- Hid comments.
- Showed comments.
- Created, edited, deleted and submitted comments.
- Used Diffusion comments (hiding is not implemented there yet, but I'd plan to bring it there eventually if it works out in Differential).
Reviewers: btrahan, chad
Reviewed By: btrahan
Subscribers: jparise, yelirekim, epriestley
Maniphest Tasks: T7447
Differential Revision: https://secure.phabricator.com/D13009
Summary: Ref T8060, String inputs should be validated and replaced by "today" values.
Test Plan: Open Calendar advanced search, enter "tea time" in date input control, open datepicker, "today" should be selected.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T8060
Differential Revision: https://secure.phabricator.com/D13018
Summary: Ref T8060, Convert date control dropdowns to an input for date
Test Plan: Create new Calendar event, use US time format to enter a date or use datepicker, confirm dates are interpreted correctly.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8060
Differential Revision: https://secure.phabricator.com/D13010
Summary: The JS and PHP representations of state can differ; just have the JS write the state out immediately on page load.
Test Plan: Saved `diffusion.fields` without making changes, reloaded, saw no effective change.
Reviewers: joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12998
Summary: Ref T8300, clicking in day view should create new event
Test Plan: Open day view, click in an empty slot, new event modal should open.
Reviewers: epriestley, #blessed_reviewers, chad
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T8300
Differential Revision: https://secure.phabricator.com/D12990
Summary: Ref T8300, Rescheduling events by dragging them in day view
Test Plan: Open day view, drag events, observe them reschedule.
Reviewers: chad, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T8300
Differential Revision: https://secure.phabricator.com/D12988
Summary: Ref T8300, Translating day view into javascript, actually
Test Plan: should be no user facing changes. should look the same as it did before.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8300
Differential Revision: https://secure.phabricator.com/D12985
Summary: Ref T8300, First step towards a Javelin behavior for Calendar day view
Test Plan: No user facing changes.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8300
Differential Revision: https://secure.phabricator.com/D12978
Summary: Ref T8031, Calendar event datepicker should auto-complete end time to be an hour from start time unless end time has been edited
Test Plan: Create event, edit start time, end time should adjust to an hour from start time.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T8031
Differential Revision: https://secure.phabricator.com/D12960
Summary: Fixes T4846. These are one off (for now) since they have various crazy actions with them. I think this will get unified and more cleaned up when we refine the UI for taking multiple actions at once, etc.
Test Plan: noted no "commented on x" in either maniphest or differential. starting making a comment and noted prevew showed. started adding a subscriber (added to tokenizer) and preview showed.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T4846
Differential Revision: https://secure.phabricator.com/D12936
Summary:
Fixes T8150. Small generalization:
- Timeline has a dropdown with no special logic; make that generic.
- Use it in Phriction.
Test Plan:
- Used Phriction dropdown on desktop and mobile.
- Used timeline dropdown.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8150
Differential Revision: https://secure.phabricator.com/D12931
Summary: Fixes T8182. See screenshot in that task. We currently render a line to nowhere at the bottom of these previews. Instead, only render a line at the top.
Test Plan:
{F409078}
Also looked at a couple other applications that use this and they looked correct.
Reviewers: btrahan, lpriestley, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T8182
Differential Revision: https://secure.phabricator.com/D12905
Summary:
Fixes T7977.
- Move Indexed Languages and See Symbols From config to Repository
- Make symbol search skip projects
This also makes the default languages to Everything instead of Nothing.
Test Plan:
- Browse files, click symbols.
- Use quick search to find symbols
- Browse revision, click symbols
Reviewers: joshuaspence, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T7977
Differential Revision: https://secure.phabricator.com/D12687
Summary:
Fixes T8194. If you loaded a conpherence directly via a URI like /Z1 or /conpherence/1/ we didn't correctly cache the loaded transactions such that sending a message would only show that message and subsequent messages.
Fix is to build the cache properly in this case. Note this codepath is different because the server sends back more of the thread data in the initial request.
Test Plan: loaded a conpherence directly, sent messages, paged back, everything kept showing!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8194
Differential Revision: https://secure.phabricator.com/D12844
Summary:
Fixes T6713. Before this diff, we would update the DOM when various requests came back, but the logic to erase race conditions proved too tricky for me to get right. Instead, change the algorithm up and keep a set of transaction ids around per thread. When its time to update the transactions, sort the list of ids and just render the whole darn set again.
To make this work, this ends up adding transacton ids to fake transactons like "show older" and date markers. This is able to work by using a float sort and giving these transactions ids that are .5 from being an integer and in the right place numerically.
Test Plan: for durable column, clicked show older and it worked. sent a message and it worked. for main view, clicked show older and it worked. sent a message and it worked.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6713
Differential Revision: https://secure.phabricator.com/D12819
Summary:
Fixes T8009. This was basically moving the behavior from conpherence full behavior menu into the ConpherenceThreadManager so it could be re used in the durable column.
The durable column bit has no special styles - its just a link - but it seems to work well enough. I think it could be removed altogether if / when we add some automagical scrolling back into history stuff.
Test Plan: loaded up a conpherence in a durable column and used 'show older messages' successfully. loaded up a conpherence in regular view mid transaction and used show older and show newer successfully
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8009
Differential Revision: https://secure.phabricator.com/D12816
Summary: Fixes T8155. The former "init_board()" function was aptly named as it needs to be called each time a new board dom piece is downloaded. Ergo, break out a setup() function and call that in the once-only setup place, and use init_board() there as well as when we have a quicksand redraw event with data from the server.
Test Plan: paged about a project and was able to keep dragging and dropping tasks on various loads of the board. verified drops saved correctly from load to load.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8155
Differential Revision: https://secure.phabricator.com/D12798
Summary: don't bother with margin class if column isn't visible. Ref T8151.
Test Plan:
using chrome with trackpad
- loaded home with toggled off column - noted no margin class erroneously applied
- toggled column off and on - correct
- loaded home with toggled on column - correct
- toggled column off and on - correct
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8151
Differential Revision: https://secure.phabricator.com/D12795
Summary:
Ref T8151. This is option (5). It needs a few adjustments but feels pretty good. Major issues are:
- Without a mouse, the scrollbars overlap by default, so we //must// move the column off the right margin.
- Scrolling sometimes "bleeds" between the chat vs the main frame in a way that's not as discrete as the old framed content, but feels generally reasonable to me.
If we pursue this, I'd plan to make these additional changes:
- Move the panel away from the right margin only if the page scrollbars are zero-width (i.e., in OSX trackpad mode).
- Fix the notch in the upper right corner when the chat is moved away from the right margin.
- Probably remove the body "overflow-y: scroll" on Conpherence and Workboards.
- Update the resizing code to deal with 300px vs 315px widths.
- We can probably clean up some JX.Scrollbar "main panel" code.
Here's the "bad" case, where I've visually separated the column to provide room for a scrollbar. This isn't ideal, but looks and feels OK to me:
{F398375}
Test Plan:
- Tried Firefox, Chrome, Safari, with and without a mouse.
- Tried normal Conpherence.
Reviewers: btrahan, chad
Reviewed By: btrahan
Subscribers: avivey, epriestley
Maniphest Tasks: T8151
Differential Revision: https://secure.phabricator.com/D12789
Summary: Closes T8021, All day events should disable time editing in edit view
Test Plan: Edit all day event, time text fields should be disabled. Unchecking all-day should show time fields.
Reviewers: chad, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8021
Differential Revision: https://secure.phabricator.com/D12774
