Summary:
See PHI766. Ref T13164. Build log chunk processing does a `preg_split()` on slices, but this isn't terribly efficient.
We can get the same count more cheaply by just using `substr_count()` a few times.
(I also tried `preg_match_all()`, which was between the two in speed.)
Test Plan:
- Used `bin/harbormaster rebuild-log --id X --force` to rebuild logs. Verified that the linemap is identical before/after this change.
- Saw local time for the 18MB log in PHI766 drop from ~1.7s to ~900ms, and `preg_split()` drop out of the profiler (we're now spending the biggest chunk of time on `gzdeflate()`).
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19545
Summary:
Fixes T13145. The list controllers properly support public access already, but some of the view/detail controllers did not.
Allow logged-out users to browse builds, buildables, plans, etc., provided they can see the corresponding objects.
Test Plan: As a logged-out user, browsed around builds, build plans, logs, etc., without hitting any login pages.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13145
Differential Revision: https://secure.phabricator.com/D19459
Summary: See PHI611 for details.
Test Plan:
Ran a Buildkite build, saw Buildkite confirm receipt of these parameters in the HTTP response:
{F5562054}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D19419
Summary:
See PHI615. Ref T13130. An install is reporting that "Lease Working Copy" build steps always report "Built instantly" after completion.
I'm not 100% sure that this is the fix, but I'm like 99% sure: "Lease Working Copy" build steps yield after they ask Drydock for a lease. They will later reenter `doWork()`, see that the lease is filled, and complete.
Right now, we reset the start time every time we enter `doWork()`. Instead, set it only if it hasn't been set yet.
Test Plan: This is low-risk and a bit tricky to reproduce locally, but I'll run some production builds and see what they look like.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13130
Differential Revision: https://secure.phabricator.com/D19412
Summary:
Ref T13124. See PHI531. When a revision is updated, builds against the older diff tend to stop being relevant. Add an option to abort outstanding older builds automatically.
At least for now, I'm adding this as a build step instead of some kind of special checkbox. An alternate implementation would be some kind of "Edit Options" action on plans with a checkbox like `[X] When this build starts, abort older builds.`
I think adding it as a build step is a bit simpler, and likely to lead to greater consistency and flexibility down the road, make it easier to add options, etc., and since we don't really have any other current use cases for "a bunch of checkboxes". This might change eventually if we add a bunch of checkboxes for some other reason.
The actual step activates //before// the build queues, so it doesn't need to wait in queue before it can actually act. T13088 discusses some plans here if this sticks.
Test Plan:
- Created a "Sleep for 120 seconds" build plan and triggered it with Herald.
- Added an "Abort Older Builds" step.
- Updated a revision several times in a row, saw older builds abort.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13124
Differential Revision: https://secure.phabricator.com/D19376
Summary:
See PHI565. Ref T13120. Although this older log is on the chopping block (see T13088), there's some migration guidance and other complexity around just replacing it.
Until it gets replaced, make clicking the "number of lines" elements respect the current "Build Generation" setting. Prior to this change, clicking the links would lose the generation information and jump you to the most recent build generation.
Also fix some collateral damage from T13105 where we ended up with white text on a white background in some cases.
Test Plan:
- Restarted a build to get multiple generations.
- On each generation, clicked the various "25", "50", etc., links.
- Saw generation and log window sizes both respected by the links.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13120
Differential Revision: https://secure.phabricator.com/D19367
Summary:
Depends on D19280. Ref T13110. Although Harbormaster cares about all builds, Differential does not practically care about local lint and unit results in determining build status.
In Differential, orient publishing around "remote builds" instead of "builds".
This does not yet change any of the draft logic, it just makes the timeline story use newer logic.
Test Plan: Used `bin/harbormaster publish` (with some guard-clause removal) to publish some buildables to revisions without anything crashing.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19281
Summary:
Depends on D19279. Ref T13110. This implements the existing publishing logic for buildables, but does so via ModularTransactions instead of a core transaction type.
Since each application is implementing build transactions independently, this removes the core type.
Next, Differential will get a similar treatment.
Test Plan: Used `bin/harbormaster publish` (with some commenting-out-guard-clauses) to publish a commit Buildable; saw unchanged feed behavior.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19280
Summary:
Depends on D19278. Ref T13110. This moves most of the structural logic for publishing builds to BuildableEngine and provides a `bin/harbormaster publish` to make publishing easy to retry/debug.
This intentionally removes the bit which actually does anything when builds publish. Followup changes will implement application-specific versions of the publishing logic in Differential and Diffusion.
Test Plan: Ran `bin/harbormaster publish Bxxx`, saw it do nothing (but not crash).
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19279
Summary:
Ref T13110. Currently, build status is published the same way for every Buildable by the BuildEngine.
I want to change this to delegate publishing to each Buildable, particularly so that Differential may use more detailed rules for handling builds and drafts.
Rather than add additional methods to the existing `BuildableInterface`, add an engine generator method instead. This is a pattern which has seen more use recently (e.g., in Ferret) and lets us pay a little more upfront to pull complex pieces of logic out of the main class and let them use inheritence more easily. If we had Traits that might cover this to some degree.
I'd expect to eventually reduce the size of `BuildableInterface` and move the `CircleCI` and `BuildKite` interfaces so that the `BuildableEngine` implements them instead of the main object.
Here, this new engine does nothing and is never instantiated. In upcoming changes, publishing logic will move into it so that Differential can handle publishing differently.
Test Plan: Ran `arc liberate`, loaded pages, grepped for `BuildableInterface`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19278
Summary:
Ref T13114. See PHI511. Ref T13072. This makes Buildables, Builds, Targets and Artifacts destructible with `bin/remove destroy`.
This might not be totally exhaustive. In particular:
- File artifacts won't destroy the file. This is sort of okay because file artifacts are currently just a file reference, but probably shouldn't be how things work in the long term.
- `BuildCommand` doesn't get cleaned up, but `BuildMessage` does on `Build`. See T13072 for more.
Test Plan: Used `bin/remove destroy` to nuke a bunch of builds, buildables, etc. Loaded stuff in the web UI and it all looked like it got nuked properly.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13114, T13072
Differential Revision: https://secure.phabricator.com/D19269
Summary:
See PHI430. Ref T13102. When the "Build Status" element raises a policy exception, we currently fatal the whole page rather than raising a normal policy error.
This is because the policy check happens very late in page construction, long after we've made the decision to show the page instead of a policy error, and gets treated as a rendering error.
In turn, this is because the rendering is event-based rather than using a more modern Engine + EngineExtension sort of construct, so some of the actual logic runs way later than it should.
Since unwinding all of this isn't trivial and the current behavior is materially bad, limit the damage here for now by just hiding the element. See T13088 for notes on handling this in a more nuanced way in the future.
Test Plan:
- Created a revision visible to "Public".
- Ran a build against it with a build plan visible to "All Users".
- Viewed revision in an incognito window.
- Before patch: Policy fatal with a red "rendering phase" error box.
- After patch: Mostly-functional page with a missing "Build Status" element.
- Viewed revision as a user with a normal session, saw the same UI before and after the change.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19232
Summary:
See PHI446. Ref T13088. Currently, there's no way to access older generations of a build unless you know the secret `?g=1` URI magic.
When a build has multiple generations, show a history table and let users click to see older run information.
This is currently very basic. It would be nice to show when each generation started, who started/restarted it, and what the build status was at the time the build was restarted. There's currently no convenient source for this information so just add a bare-bones, working version of this for now.
Test Plan:
Viewed pending, single-run and multi-restart builds. Saw table on builds with more than one generation. Clicked table entries to see different build data.
{F5471160}
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19217
Summary:
Depends on D19166. Ref T13088. When the user scrolls away from a followed log, break the focus lock.
Let users stop following a live log.
Show when lines are added more clearly.
Don't refresh quite as quickly give users a better shot at clicking the stop button.
These behaviors can probably be refined but are at least more plausible and less actively user-hostile than the first version of this behavior was.
Test Plan: Used `write-log --rate` to write a large log slowly. Clicked "Follow Log", followed for a bit. Scrolled away, still got live updates but no more scroll lock. Clicked stop, no more updates.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19167
Summary:
Depends on D19165. Ref T13088. Currently, in other applications, we use Zero Width Spaces and Javascript "copy" listeners to prevent line numbers from being copied. This isn't terribly elegant.
Modern browsers support a second approach: using psuedo-elements with `content`. Try this in Harbormaster since it's conceptually cleaner, at least. One immediate drawback is that Command-F can't find this text either.
Test Plan: In Safari, Chrome and Firefox, highlighted ranges of lines and copy/pasted text. Got just text (no line numbers) in all cases.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19166
Summary: Depends on D19164. Ref T13088. Now that the JS behaviors are generic, use them on the Harbormaster standalone page.
Test Plan: Clicked lines and dragged across line ranges. Reloaded pages. Saw expected highlighting behavior in the client and on the server across reloads.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19165
Summary:
Depends on D19162. Ref T13088. When a user links to `$1234`, we need to render a default view of the log with a piece at the head, a piece at the end, and a piece in the middle.
We also need to figure out the offset for line 1234, or multiple offsets for "1234-2345".
Since the logic views/reads mostly anticipated this it isn't too much of a mess, although there are a couple of bugs this exposes with view specifications that use combinations of parameters which were previously impossible.
Test Plan: Viewed a large log with no line marker. Viewed `$1`. Viewed `$end`. Viewed `$35-40`, etc. Expanded context around logs.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19163
Summary:
Depends on D19155. Ref T13094. Ref T4340.
We can't currently implement a strict `form-action 'self'` content security policy because some file downloads rely on a `<form />` which sometimes POSTs to the CDN domain.
Broadly, stop generating these forms. We just redirect instead, and show an interstitial confirm dialog if no CDN domain is configured. This makes the UX for installs with no CDN domain a little worse and the UX for everyone else better.
Then, implement the stricter Content-Security-Policy.
This also removes extra confirm dialogs for downloading Harbormaster build logs and data exports.
Test Plan:
- Went through the plain data export, data export with bulk jobs, ssh key generation, calendar ICS download, Diffusion data, Paste data, Harbormaster log data, and normal file data download workflows with a CDN domain.
- Went through all those workflows again without a CDN domain.
- Grepped for affected symbols (`getCDNURI()`, `getDownloadURI()`).
- Added an evil form to a page, tried to submit it, was rejected.
- Went through the ReCaptcha and Stripe flows again to see if they're submitting any forms.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13094, T4340
Differential Revision: https://secure.phabricator.com/D19156
Summary: Depends on D19152. Ref T13088. This adds live log tailing. It is probably not the final version of this feature because it prevents escape once you begin tailing a log.
Test Plan: Used `bin/harbormaster write-log --rate ...` to write a log slowly. Viewed it in the web UI. Clicked "Follow Log". Followed the log until the write finished, a lifetime later.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19153
Summary: Depends on D19151. Ref T13088. While dramatically less exciting than using `lolcat` and less general than `pv`, this should do the job adequately.
Test Plan: Piped a sizable log into `bin/harbormaster write-log` with `--rate 2048`, saw a progress bar. Loaded the log in the web UI and saw it grow as the page reloaded.
Reviewers: yelirekim
Reviewed By: yelirekim
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19152
Summary:
Depends on D19150. Ref T13088. Allow clients to retrieve information about build logs, including log data, over the API.
(To fetch log data, take the `filePHID` to `file.search`, then issue a normal GET against the URI. Use a `Content-Range` header to get part of the log.)
Test Plan: Ran `harbormaster.log.search`, got sensible-looking results.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19151
Summary: Depends on D19149. Ref T13088. Since the new log requires a bunch of log reprocessing, the cutover is going to require at least some time for installs to run migrations. Add a link in the UI to ease the transition, smooth over some behaviors a little, and fix a fetch issue where we'd request past the end of the log (since this is now enforced).
Test Plan: Viewed a traditional Harbormaster build, saw links to the new standalone log pages.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19150
Summary: Depends on D19148. Ref T13088. The new rendering always executes range requests for data it needs, and we can satisfy these requests by loading the smallest number of chunks which span that range.
Test Plan: Piped 50,000 lines of Apache log into Harbormaster, viewed it in the new UI, got sensible rendering times and a reasonable amount of data actually going over the wire.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19149
Summary: Ref T13088. This variable bled through from an earlier loop and caused us to drop some of the lines in the middle.
Test Plan: Clicked "Show More", got an equal number of header and footer lines.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19148
Summary:
Depends on D19141. Ref T13088. Some of the fundamental log behaviors like "loading the correct rows" are now a bit better behaved.
The UI is a little less garbage, too.
Test Plan: Viewed some logs and loaded more context by clicking the buttons.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19142
Summary: Depends on D19139. Ref T13088. This doesn't actually work, but is close enough that a skilled attacker might be able to briefly deceive a small child.
Test Plan:
- Viewed some very small logs under very controlled conditions, saw content.
- Larger logs vaguely do something resembling working correctly.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19141
Summary:
Depends on D19138. Ref T13088. When we want to read the last part of a logfile //and show accurate line numbers//, we need to be able to get from byte offsets to line numbers somehow.
Our fundamental unit must remain byte offsets, because a test can emit an arbitrarily long line, and we should accommodate it cleanly if a test emits 2GB of the letter "A".
To support going from byte offsets to line numbers, compute a map with periodic line markers throughout the offsets of the file. From here, we can figure out the line numbers for arbitrary positions in the file with only a constant amount of work.
Test Plan: Added unit tests; ran unit tests.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19139
Summary: Depends on D19137. Ref T13088. This allows `rebuild-log` to skip work if the chunks are already compressed. It also prepares for a future GC which is looking for "text" or "gzip" chunks to throw away in favor of archival into Files; such a GC can use this column to find collectable logs and then write "file" to it, meaning "chunks are gone, this data is only available in Files".
Test Plan: Ran migration, saw logs populate as "text". Ran `rebuild-log`, saw logs rebuild as "gzip".
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19138
Summary: Depends on D19136. Ref T13088. Since it's probably impractical to do all the migrations these changes imply during `bin/storage upgrade`, provide some support for performing them online.
Test Plan: Ran `bin/harbormaster rebuild-log` with `--all`, `--id`, and with and without `--force`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19137
Summary: Depends on D19135. Ref T13088. Denormalize the total log size onto the log itself. This makes reasoning about the log at display time easier, and we don't need to fish around in the database as much to figure out what we're dealing with.
Test Plan: Ran `bin/harbormaster rebuild-log`, saw an existing log populate. Ran `bin/harbormaster write-log`, saw new log write with proper length information.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19136
Summary:
Depends on D19134. Ref T13088. Future changes will support API writers, so push the log lock into the Log object.
Allow open/close ("this process is writing to this log") to be separate from live/final ("this log is still generating more data").
Test Plan: Wrote logs with `bin/harbormater write-log` and updated logs with `bin/harbormaster rebuild-log`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19135
Summary: Depends on D19133. Ref T13088. Allows build logs to be formally destroyed, cleaning up their chunks and file data.
Test Plan:
- Used `bin/remove destroy` to destroy a log, verified chunks and files were removed.
- Used `bin/harbormaster rebuild-log` to force a log to rebuild, verified files were destroyed and regenerated.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19134
Summary: Depends on D19132. Ref T13088. This implements an extremely skeletal dedicated log page with a more-or-less functional "Download Log" button.
Test Plan: Downloaded a recent log. Tried to download an old (un-finalized) log, couldn't. Used `bin/harbormaster write-log` to get a convenient standalone link to a log.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19133
Summary: Depends on D19131. Ref T13088. During log finalization, stream the log into Files to support "Download Log", archive to Files, and API access.
Test Plan: Ran `write-log` and `rebuild-log`, saw Files objects generate with log content and appropriate permissions.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19132
Summary: Depends on D19130. Ref T13088. Currently, when a build log is closed we compress it in the same process. Separate this out into a dedicated worker since the plan is to do a lot more work during finalization, none of which needs to happen inline during builds (or, particuarly, inline during a Conduit call for API writes in the future).
Test Plan: Ran `bin/harbormaster write-log --trace`, saw compression run inline.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19131
Summary: Ref T13088. This is currently minimal but the modify-execute development loop on build logs is extremely long without it.
Test Plan: Ran `echo hi | ./bin/harbormaster write-log --target 12345`, saw the log show up in the web UI.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19130
Summary: See D19117. Instead of automatically figuring this out inside `phutil_tag()`, explicitly add rel="noreferrer" at the application level to all external links.
Test Plan:
- Grepped for `_blank`, `isValidRemoteURIForLink`, checked all callsites for user-controlled data.
- Created a link menu item, verified noreferrer in markup.
- Created a link custom field, verified no referrer in markup.
- Verified noreferrer for `{nav href=...}`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D19118
Summary:
Depends on D19084. Fixes T13078. When `phabricator.silent` is enabled, immediately fail the "HTTP Request", "CircleCI" and "Buildkite" build steps.
This doesn't feel quite as clean as most of the other behavior of `phabricator.silent`, since these calls are not exactly notifications in the same way that email is, and failing to make these calls means that builds run differently (whereas failing to deliver email doesn't really do anything).
However, I suspect that this behavior is almost always reasonable/correct, and that we can probably get away with it until this grey area between "notifications" and "external service calls" is more clearly defined.
Test Plan:
- Created a build with HTTP, CircleCI, and Buildkite steps.
- Put install in `phabricator.silent` mode: all three steps failed with "declining, because silent" messages.
- Put install back in normal mode: all three steps made HTTP requests.
- Read updated documentation.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13078
Differential Revision: https://secure.phabricator.com/D19085
Summary:
Depends on D19065. Ref T13054. Instead of just updating `containerPHID` and hoping for the best, queue a proper BuildWorker to process a "your container has changed, update it" message.
We also need to remove a (superfluous) `withContainerPHIDs()` when loading active diffs for a revision.
Test Plan:
- Without daemons, created a revision and saw builds stick in "preparing" with no container PHID, but also stay in draft mode.
- With daemons, saw builds actually build and get the right container PHID.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054
Differential Revision: https://secure.phabricator.com/D19066
Summary:
Depends on D19064. Ref T13054. See that task for additional discussion.
When buildables are created by `arc` and have lint/unit messages, they can currently pass or fail before Herald triggers actual builds. This puts them in a pre-build state where they can't complete until Herald says it's okay.
On its own, this change intentionally strands `arc diff --only` diffs in the "PREPARING" stage forever.
Test Plan:
- Ran a build with `bin/harbormaster`, saw it build normally.
- Ran a build with web UI, saw it build normally.
- Ran a build with `arc diff`, saw it build normally.
- Ran a build with `arc diff --only`, saw it hang in "PREPARING" forever.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054
Differential Revision: https://secure.phabricator.com/D19065
Summary: Depends on D19063. Ref T13054. Prepare for the addition of a new `PREPARING` status by getting rid of the "scattered mess of switch statements" pattern of status management.
Test Plan: Searched/browsed buildables. Viewed buildables. Viewed revisions. Grepped for all affected symbols.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054
Differential Revision: https://secure.phabricator.com/D19064
Summary: Ref T13054. Companion storage change for D19062.
Test Plan: Applied migration and adjustments. Viewed messages in Harbormaster; created them with `harbormaster.sendmessage`; processed them with `bin/phd debug task`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054
Differential Revision: https://secure.phabricator.com/D19063
Summary:
See T13054. This prepares for Buildables to be sent messages ("attach", "done scheduling builds") to fix races between Harbormaster and Differential.
The `buildTargetPHID` is replaced with a `recipientPHID` in the API. An additional change will fix the storage.
In the future, this table could probably also replace `HarbormasterBuildCommand` now, which is approximately the same bus, but for Builds.
Test Plan: Viewed builds with messages. Sent messages with `harbormaster.sendmessage`. Processed messages with `bin/phd debug task`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D19062
Summary:
Ref T13054. Fixes T10746. Fixes T11154. This is really a one-line fix (include `ABORTED` in `BuildEngine->updateBuildable()`) but try to structure the code a little more clearly too and reduce (at least slightly) the number of random lists of status attributes spread throughout the codebase.
Also add a header tag for buildable status.
Test Plan: Aborted a build, saw buildable fail properly.
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054, T11154, T10746
Differential Revision: https://secure.phabricator.com/D19055
Summary:
Ref PHI261. This moves Harbormaster build status to work more similarly to other modern status types, like Differential revision status, where we try to specify as much behavior on the server as possible so that the client and server can vary independently.
(I don't have any specific plans to make Harbormaster build status configurable on the server side, but it isn't out of the question.)
Test Plan: Ran `harbormaster.querybuilds` (saw same data as before) and `harbormaster.build.search` (saw same data as before, plus new ANSI color data).
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18838
Summary:
Ref T2543. Fixes T10109.
Currently, Herald only runs in Differential when a change updates the diff. This is partly for historical reasons, and partly because we don't want to restart builds every time someone makes a comment. However, this behavior is inconsistent with other applications (which always trigger on any change), and occasionally confusing to users (in T10109, for example) or otherwise undesirable.
A similar issue is that T2543 has introduced a "Draft" state, where revisions don't send normal mail until builds finish. This interacts poorly with "Send me an email" rules (which shouldn't do anything here) and particularly with "Send me an email + only run these actions the first time the rule matches", since that might have an effect like "do nothing when the revision is created, then never anything again since you already did nothing once".
To navigate both of these issues, let objects tell Herald that certain actions (like mail or builds) are currently forbidden. If a rule uses a field or action which is currently forbidden, the whole rule automatically fails before it executes, but doesn't count toward "only the first time" as far as Herald's tracking of rule execution is concerned.
Then, forbid mail for draft revisions, and forbid builds for revisions which didn't just get updated. Forbidding mail fixes the issues with "Send me an email" that were created by the introduction of the draft state.
Finally, make Herald run on every revision update, not just substantive updates to the diff. This resolves T10109.
Test Plan:
Created revisions via the draft -> submit workflow, saw different transcripts. Here's a mail action being forbidden for a draft:
{F5237324}
Here's a build action being forbidden for a "mundane" update:
{F5237326}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T10109, T2543
Differential Revision: https://secure.phabricator.com/D18731
Summary: See PHI176. We issue a query with only `artifactIndex` from `BuildTarget`, but don't have an applicable key.
Test Plan: This isn't on the normal Harbormaster execution path so I'm not 100% sure I have a local repro, but will confirm with customer.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18732
Summary:
Ref T2543. When a revision is created, we check if any builds are waiting/failed, and submit it for review immediately if we aren't waiting for anything.
In doing this, we ignore builds with only autotargets, since these are client-side and failures from local `arc lint` / `arc unit` should not count (the user has already chosen to ignore/skip them).
The way we do this has some issues:
- Herald may have started builds, but they may still be PENDING and not have any targets yet. In this case, we'll see "no non-autotargets" and ignore the build, which is wrong.
- We have to load targets but don't really care about them, which is more work than we really need to do.
- And it's kind of complex, too.
Instead, just let `BuildQuery` filter out "autobuilds" (builds generated from autoplans) with a JOIN.
Test Plan: Ran `arc diff` with builds configured, got a clean "Draft" state instead of an incorrect promotion directly to "Needs Review".
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18721
Summary: Noticed a couple of typos in the docs, and then things got out of hand.
Test Plan:
- Stared at the words until my eyes watered and the letters began to swim on the screen.
- Consulted a dictionary.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18693
