Summary:
Ref T13164. PHI805 incidentally includes some `bin/storage probe` output for 100GB+ tables which renders wrong.
We have the tools to render it properly, so stop doing this manually and let ConsoleTable figure out the alignment.
Test Plan:
Faked very large table sizes, ran `bin/storage probe`:
{F5785946}
(Then, un-faked the very large table sizes and ran it again, got sensible output.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19567
Summary:
Ref T13164. See PHI766. Currently, when file data is stored in small chunks, we submit each chunk to the indexing engine.
However, chunks are never surfaced directly and can never be found via any search/query, so this work is pointless. Just skip it.
(It would be nice to do this a little more formally on `IndexableInterface` or similar as `isThisAnIndexableObject()`, but we'd have to add like a million empty "yes, index this always" methods to do that, and it seems unlikely that we'll end up with too many other objects like these.)
Test Plan:
- Ran `bin/harbormaster rebuild-log --id ... --force` before and after change, saw about 200 fewer queries after the change.
- Uploaded a uniquely named file and searched for it to make sure I didn't break that.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19563
Summary:
Ref T13164. See PHI725. For real "*.search" methods, parameters get validated and you get an error if you use an empty list as a constraint.
Since "transaction.search" isn't really a normal "*.search" method, it doesn't benefit from this. Just do the check manually for now.
Test Plan: Made `transaction.search` calls with no constraints (got results); a valid costraint (got fewer results); and an invalid empty constraint (got an exception).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19562
Summary:
Ref T13164. See PHI797. The last edit is available in the page header, but it's not precise (just says "180 days ago") and a little weird (it's unusual for us to put that kind of information in the header).
Add a precise timestamp to the footer for now. I'd imagine re-examining this the next time Phriction gets some UI work and maybe trying to integrate timeline/transactions more cleanly (see also T1894).
Test Plan: Looked at a wiki page, then edited it. Saw precise "Last Edit" timestamp adjacent to "Last Author".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19560
Summary:
See D19558. This method has no callers and just wraps `diffusion.historyquery`, since D5960 (2013).
This was introduced in D315 (which didn't make it out of FB, I think) inside Facebook for unclear purposes in 2011.
Test Plan: Grepped for callers, found none.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: artms
Differential Revision: https://secure.phabricator.com/D19559
Summary:
`diffusion.getrecentcommitsbypath` fails with 500 error when non existing callsign is passed:
```
>>> UNRECOVERABLE FATAL ERROR <<<
Call to a member function getCommit() on null
```
Expected Behavior:
Return more graceful error notifying caller that such callsign/repository does not exist
Reproduction steps:
Open conduit: https://secure.phabricator.com/conduit/method/diffusion.getrecentcommitsbypath/
Enter:
callsign: "obviouslynotexisting"
path: "/random"
Click call method
Test Plan: after applying patch - call no longer fails with 500s
Reviewers: Pawka, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D19558
Summary:
Makes `ssh-connect` compatible with Git v2 wire protocol over SSH
More details about git V2 wire: https://opensource.googleblog.com/2018/05/introducing-git-protocol-version-2.html
`git` command (2.18+) passes extra options (`-o "SendEnv GIT_PROTOCOL"`) to underlying `ssh` command to enable v2 wire protocol (environment variable enabling new protocol).
Phabricator `ssh-connect` command doesn't understand `-o` options and interprets it as host parts hence when you enable git v2 all clones/ls-remotes crash with:
```
#0 ExecFuture::resolvex() called at [<phabricator>/src/applications/repository/storage/PhabricatorRepository.php:525]
#1 PhabricatorRepository::execxRemoteCommand(string, PhutilOpaqueEnvelope) called at [<phabricator>/src/applications/repository/engine/PhabricatorRepositoryPullEngine.php:400]
#2 PhabricatorRepositoryPullEngine::loadGitRemoteRefs(PhabricatorRepository) called at [<phabricator>/src/applications/repository/engine/PhabricatorRepositoryPullEngine.php:343]
#3 PhabricatorRepositoryPullEngine::executeGitUpdate() called at [<phabricator>/src/applications/repository/engine/PhabricatorRepositoryPullEngine.php:126]
#4 PhabricatorRepositoryPullEngine::pullRepositoryWithLock() called at [<phabricator>/src/applications/repository/engine/PhabricatorRepositoryPullEngine.php:40]
#5 PhabricatorRepositoryPullEngine::pullRepository() called at [<phabricator>/src/applications/repository/management/PhabricatorRepositoryManagementUpdateWorkflow.php:59]
#6 PhabricatorRepositoryManagementUpdateWorkflow::execute(PhutilArgumentParser) called at [<phutil>/src/parser/argument/PhutilArgumentParser.php:441]
#7 PhutilArgumentParser::parseWorkflowsFull(array) called at [<phutil>/src/parser/argument/PhutilArgumentParser.php:333]
#8 PhutilArgumentParser::parseWorkflows(array) called at [<phabricator>/scripts/repository/manage_repositories.php:22]
COMMAND
git ls-remote '********'
STDOUT
(empty)
STDERR
ssh: Could not resolve hostname -o: Name or service not known
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
at [<phutil>/src/future/exec/ExecFuture.php:369]
```
Test Plan:
How to reproduce:
1. add repository to Phabricator which is accessed via `ssh`
2. Use git 2.18+
3. Enable wire protocol in `/etc/gitconfig`:
```
[protocol]
version = 2
```
4. Try refreshing repository: `phabricator/bin/repository update somecallsing`
5. Repository update fails with `ssh: Could not resolve hostname -o: Name or service not known`
after this changes - updates will succeed
Reviewers: epriestley, Pawka, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D19542
Summary:
Depends on D19556. See PHI765. Ref T13164. Currently, if you type `H1` in this datasource, it isn't smart enough to pull up the right object.
Add support for querying by monogram. This is similar to existing support in Owners packages, etc.
Test Plan: Typed `H1` in the new push log filter, got the right object as a result in the typeahead.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19557
Summary: Depends on D19555. Ref T13164. See PHI765. An install is interested in getting a sense of the impact of a particular blocking rule, which seems reasonable. Support filtering for pushes blocked by a particular rule or set of rules.
Test Plan: {F5776385}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19556
Summary:
Ref T13164. See PHI765. We currently show "Rejected: Herald" in the push log UI, but don't show which rule rejected a push.
We store this data, and it's potentially useful: either for hunting down a particular issue, or for getting a general sense of how often a reject rule is triggering (maybe because you want to tune how aggressive it is).
Show this data in the web UI, and include it in the data export payload.
Test Plan:
- Pushed to a hosted repository so that I got blocked by a Herald rule.
- Viewed the push logs in the web UI, now saw which rule triggered things.
- Exported logs to CSV, saw Herald rule PHIDs in the data.
{F5776211}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19555
Summary:
Depends on D19550. Ref T13164. See T12144#226172, mostly. We get some requests to make milestones reorderable, but in most cases users probably wanted subprojects, not milestones.
One reason to end up here is that we put "Milestones" on top. Instead, put "Subprojects" on top, since they're the less specialized option and we aren't terribly consistent about it anyway.
Test Plan: Viewed project subprojects page, saw "Subprojects" above "Milestones".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19551
Summary: Depends on D19552. Ref T13164. We need this little `setObject(...)` hook to get the Space name into the search list UI.
Test Plan: Viewed project list, saw some Spaces listed.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19554
Summary:
Ref T13164. See PHI774. Fixes T12435.
Since Phriction is hierarchical, there isn't a super strong motivation to support Spaces: you can generally set policies on a small number of documents to get the desired effective policy behavior.
However, it still improves consistency and there's no reason //not// to support Spaces. In the case where you have some moderately weird/complex policy on one or more Spaces, using Spaces to define the policy behavior can make things a bit simpler and easier to understand.
This probably doesn't actually fix whatever the root problem in T12435 was (complicated, non-hierarchical access policies?). See also a bunch of discussion in T12442. So we might end up going beyond this to address other use cases, but I think this is reasonable regardless.
Test Plan: Created and edited Phriction documents and shifted them between Spaces. Searched by Space, etc.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13164, T12435
Differential Revision: https://secure.phabricator.com/D19553
Summary:
Depends on D19551. Ref T13164. Projects use a special kind of header setup that has a more specific CSS rule to make content black. Add an even more specific rule to make it red.
(This could probably be disentangled a bit and isn't necessarily the cleanest fix, but I poked at it for a few minutes and didn't come up with anything cleaner.)
Test Plan: Viewed projects in spaces, saw the space names colored red properly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19552
Summary:
Depends on D19549. Ref T13164. See PHI774.
- Make milestones inherit their parent project's space automatically, like they inherit their parent policies.
- Make subprojects default to their parent project's space.
Test Plan: Created subprojects and milestones, got sensible default/effective Space behavior.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19550
Summary:
See PHI774. Ref T13164. There is no reason projects //don't// support Spaces, just a vague concern that it's not hugely useful and might be a bit confusing.
However, it's at least somewhat useful (to improve consistency and reduce special casing) and doesn't necessarily seem more confusing than Projects are anyway. Support is trivial from a technical point of view, so just hook it up.
Test Plan: Created new projects, shifted projects between spaces. The support is all pretty much automatic.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19549
Summary:
Ref T12907. At least part of the problem is that we can hit PHP's `max_execution_time` limit on the file download pathway.
We don't currently set this to anything in the application itself, but PHP often sets it to 30s by default (and we have it set to 30s in production).
When writing responses, remove this limit. This limit is mostly a protection against accidental loops/recurison/etc., not a process slot protection. It doesn't really protect process slots anyway, since it doesn't start counting until the request starts executing, so you can (by default) //send// the request as slowly as you want without hitting this limit.
By releasing the limit this late, hopefully all the loops and recursion issues have already been caught and we're left with mostly smooth sailing.
We already remove this limit when sending `git clone` responses in `DiffusionServeController` and nothing has blown up. This affects `git clone http://` and similar.
(I may have had this turned off locally and/or just be too impatient to wait 30s, which is why I haven't caught this previously.)
Test Plan:
- Poked around and downloaded some files.
- Will `curl ...` in production and see if that goes better.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12907
Differential Revision: https://secure.phabricator.com/D19547
Summary:
See PHI766. Ref T13164. Build log chunk processing does a `preg_split()` on slices, but this isn't terribly efficient.
We can get the same count more cheaply by just using `substr_count()` a few times.
(I also tried `preg_match_all()`, which was between the two in speed.)
Test Plan:
- Used `bin/harbormaster rebuild-log --id X --force` to rebuild logs. Verified that the linemap is identical before/after this change.
- Saw local time for the 18MB log in PHI766 drop from ~1.7s to ~900ms, and `preg_split()` drop out of the profiler (we're now spending the biggest chunk of time on `gzdeflate()`).
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19545
Summary:
See PHI785. Ref T13164. In this case, an install wants to receive mail via Mailgun, but not configure it (DKIM + SPF) for outbound mail.
Allow individual mailers to be marked as not supporting inbound or outbound mail.
Test Plan:
- Added and ran unit tests.
- Went through some mail pathways locally, but I don't have every inbound/outbound configured so this isn't totally conclusive.
- Hit `bin/mail send-test` with a no-outbound mailer.
- I'll hold this until after the release cut so it can soak on `secure` for a bit.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19546
Summary:
Ref T13151. See PHI616. Fixes T8163.
This adds `/D123/new/`, which shows the changes to the revision since the last timeline action you took.
It also adds a link to this view to diff update emails.
Test Plan:
- Followed this link with a recent comment and no touches since update, ended up with sensible diff selections.
- Updated revision, generated email, saw an appropriate link.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151, T8163
Differential Revision: https://secure.phabricator.com/D19541
Summary:
See PHI751. Ref T13164. We added a "silent" flag for Editors somewhat recently (currently reachable only for bulk edits with `bin/bulk ...` command).
However, this flag doesn't carry through to the sub-editor when we make inverse edge edits. These are edits like "X is a parent of Y", which cause an implicit "Y is a child of X" edit to occur.
Pass the flag through.
Test Plan:
- Rigged the relationships controller to make silent edits.
- Changed the parents of a revision from the web UI. Saw no mail or feed stories.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19543
Summary:
See PHI749. Ref T13164. We currently misdetect files starting with `[submodule ...` as JSON.
Make this a bit stricter:
- If the file is short, just see if it's actually literally real JSON.
- If the file is long, give up.
This should get the right result in pretty much all the cases people care about, I think. We could make the long-file guesser better some day.
Test Plan: Detected a `[submodule ...` file (no longer JSON) and a `{"duck": "quack"}` file (still JSON).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19544
Summary:
Fixes T13172. At one point we always capitalized all the text, and the cache uses capitalized text.
However, we stopped capitalizing the text at some point. Modern memes are more more subtle than old memes, and when we eventualy add support for things like "explodey brain" we'll certainly want to support mixed case.
Practically, this stops you from changing the capitalization of a cached meme. Get rid of the cache transform.
Test Plan:
none lul
(I don't have `gd` installed locally and buiding it requires building libjpeg and libpng or giving up and using `brew`. I'l vet this in production.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13172
Differential Revision: https://secure.phabricator.com/D19537
Summary:
See T7148. This just cheats us out of a weird sort of race where we:
- Dump an instance, including some `F123` which is a temporary file which expires in 3 minutes.
- A few minutes later, the daemons delete the data for that file.
- A few minutes after that, we try to `bin/files migrate --copy` to copy the data from S3 into the MySQL blob store.
- This fails since the data is already gone.
Instead, just skip these files since they're already dead to us.
Test Plan: Faked this locally, will migrate the PHI769 instance on `aux001`.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19536
Summary: I've pulled up this code probably three different times to make sure that the big scary warning does, in fact, still get printed even when passing `--unitest-fixtures` to `bin/storage destroy`. Make the warning message less scary if only removing test data.
Test Plan: Ran with and without `--unitest-fixtures` and saw expected warnings. After agreeing to warnings, test data was deleted as expected. Did not test `bin/storage destroy` without `--unittest-fixtures`.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D19535
Summary:
When generating test data to solve a bug I have encountered, I noticed Lipsum was not working correctly for Differential Revisions and Pastes.
It seemed like they weren't updated after some refactoring. This fixes that by updating them.
Test Plan: Run Lipsum for all objects, and note that it has much less failure.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D19534
Summary:
Depends on D19529. See PHI778.
- Document the "name" constraint as deprecated. All callers are likely better served by the "query" constraint.
- Guide users toward the "query" constraint a little better.
- Document the `=` syntax.
Test Plan: Read various new documentation.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19531
Summary:
Ref PHI778. In D18492, I added support for parsing this operator, but did not actually implement it in the query engine.
Implementation is fairly straightforward. This supports querying for objects by exact title with `title:="exact title"`. This is probably a bad idea, but sometimes maybe useful anyway.
Test Plan: Queried for `title:="xxx"`, found only exact matches.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: ahoffer2
Differential Revision: https://secure.phabricator.com/D19529
Summary: Fixes T13171. Open to suggestions but that face looks real, real dumb on High Sierra.
Test Plan: Visited Config, saw a serious professional emoji in the page title.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13171
Differential Revision: https://secure.phabricator.com/D19530
Summary:
See PHI775. See D19499. Originally, see PHI720.
D19499 broke the standalone "Branches" page for commits. Normally, you reach this by taking these steps:
- View a commit which is contained by 11 or more branches.
- Click the "More Branches..." link in the "Branches" field.
- You should be taken to a list of all branches which contain the commit.
The change to the 'branch' parameter was adjusted in the query that builds the "x, y, z, More Branches..." list, but not on the actual "Branches" list with the full list. Adjust it.
Test Plan:
- Set display limit to 1, viewed a commit on "master" and "stable", clicked "More Branches".
- Before: saw only "master".
- After: saw both "master" and "stable".
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19532
Summary:
Ref T13168. I'm not sure how this worked before, but I ran into this issue on my new laptop.
SiteSource accesses `PhabrictatorEnv::getEnvConfig('phabricator.base-uri')` when local, which may poison the cache and lock the value since we don't later discard the cache.
Specifically, when I access `http://locala.phacility.com`, I was getting an error like "You made a request for locala.phacility.com, but no configured site can serve this request.". This was because the base-uri was being incorrectly frozen as "local.phacility.com". The expectation is that it will match, so the standard PlatformSite will serve the request.
Test Plan:
- Before change: "no configured site" error.
- After change: local instance works properly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13168
Differential Revision: https://secure.phabricator.com/D19526
Summary: Ref T13168. This is just a small quality-of-life fix: we can disclose which public key we're talking about because public keys are public.
Test Plan:
- Hit public key error (through my own bumbling / not reading or following instructions). Specifically, I haven't associated the key with a device in Almanac.
- Before: vague error.
- After: more specific error with enough key material that I could grep for it.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13168
Differential Revision: https://secure.phabricator.com/D19516
Summary:
See PHI746. See also T11833, perhaps. Ref T13151.
Long ago, parent revisions were called "dependent revisions". This was changed to "parent revisions" in the action UI to improve clarity, but not changed in the timeline stories.
Update the timeline stories to use the same language the actions in the UI use.
Test Plan:
{F5732876}
{F5732877}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19514
Summary:
Ref T13151. See PHI727. Update the dashboard widget/panel datasource to actually query results using what the user typed.
The current approach is blind to what the user typed when pulling results from the database, and gets limited to an artificially small number of results somewhere in the pipeline.
Test Plan:
- Queried for panels with text queries.
- Queried for panels with `W123` queries.
- This is substantially similar to the Owners datasource, which received a similar update in D17142 and has worked well since then.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19511
Summary:
Depends on D19509. Ref T13151. See PHI725. `transaction.search` supports "constraints" and the documentation mentions it in passing, but doesn't really show how to do it, and the method is not automatically self-documenting because it isn't a "real" `*.search` method.
Add an example of how to use the `contraints` parameter to retrieve information about only the relevant transactions.
Also remove a refernece to `requestb.in`, which is now defunct.
Test Plan: Called `transaction.search` with similar parameters.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19510
Summary:
See PHI725. Ref T13151. These actions are somewhat unusual and I considered different ways to represent them (make them look like "status" transactions; build multiple synthetic transactions) but ultimately landed on the simplest approach of just exposing them more or less as they exist internally.
I haven't included data for any of them. Most don't really have any data, but "accept" does. I'm holding off on providing more data until after T731, which may shake up the internal format.
Test Plan: Applied most of these transactions against a revision, queried for it with `transaction.search`, got distinguishable transactions out.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19509
Summary:
Per the documentation[1], any intermediate chain is to be
appended to the "cert" parameter. The "ca" parameter controls the
root CA used to authenticate the client certificate, if one is
provided, and is not used for intermediate certificate chains -- nor
has it ever been. It is not clear how this could have worked in the
past[2].
[1] https://nodejs.org/api/tls.html#tls_tls_createsecurecontext_options
[2] D15709
Test Plan:
Before this diff, with node 4.2.6 from Ubuntu packages:
```
$ openssl s_client -connect phabricator.dropboxer.net:22280 -verify 5 -CApath /etc/ssl/certs/
verify depth is 5
CONNECTED(00000003)
depth=0 C = US, ST = California, L = San Francisco, O = "Dropbox, Inc", OU = Dropbox Ops, CN = phabricator.dropboxer.net
verify error:num=20:unable to get local issuer certificate
verify return:1
depth=0 C = US, ST = California, L = San Francisco, O = "Dropbox, Inc", OU = Dropbox Ops, CN = phabricator.dropboxer.net
verify error:num=27:certificate not trusted
verify return:1
depth=0 C = US, ST = California, L = San Francisco, O = "Dropbox, Inc", OU = Dropbox Ops, CN = phabricator.dropboxer.net
verify error:num=21:unable to verify the first certificate
verify return:1
---
Certificate chain
0 s:/C=US/ST=California/L=San Francisco/O=Dropbox, Inc/OU=Dropbox Ops/CN=phabricator.dropboxer.net
i:/C=US/O=DigiCert Inc/OU=www.digicert.com/CN=DigiCert SHA2 High Assurance Server CA
```
After:
```
$ openssl s_client -connect phabricator.dropboxer.net:22280 -verify 5 -CApath /etc/ssl/certs/
verify depth is 5
CONNECTED(00000003)
depth=2 C = US, O = DigiCert Inc, OU = www.digicert.com, CN = DigiCert High Assurance EV Root CA
verify return:1
depth=1 C = US, O = DigiCert Inc, OU = www.digicert.com, CN = DigiCert SHA2 High Assurance Server CA
verify return:1
depth=0 C = US, ST = California, L = San Francisco, O = "Dropbox, Inc", OU = Dropbox Ops, CN = phabricator.dropboxer.net
verify return:1
---
Certificate chain
0 s:/C=US/ST=California/L=San Francisco/O=Dropbox, Inc/OU=Dropbox Ops/CN=phabricator.dropboxer.net
i:/C=US/O=DigiCert Inc/OU=www.digicert.com/CN=DigiCert SHA2 High Assurance Server CA
1 s:/C=US/ST=California/L=San Francisco/O=Dropbox, Inc/OU=Dropbox Ops/CN=phabricator.dropboxer.net
i:/C=US/O=DigiCert Inc/OU=www.digicert.com/CN=DigiCert SHA2 High Assurance Server CA
2 s:/C=US/O=DigiCert Inc/OU=www.digicert.com/CN=DigiCert SHA2 High Assurance Server CA
i:/C=US/O=DigiCert Inc/OU=www.digicert.com/CN=DigiCert High Assurance EV Root CA
```
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D18181
Summary: See PHI725. Ref T13151. We currently try to load comments unconditionally, but not all objects (like projects) have comments. Only try to load comments if an object actually has comments.
Test Plan: Queried for an object with no comments, like project `#masonry`, via `transaction.search`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19507
Summary:
Ref T13151. See PHI725. By default, "transaction.search" doesn't provide details about transactions because many have bad/weird/policy-violating internal types or fields.
The "create" transaction is simple and straightforward, so label it to allow callers to distinguish it.
Test Plan:
- Created a new task.
- Called `transaction.search` on it.
- Saw the labelled "create" transaction.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: swisspol
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19505
Summary:
Depends on D19503. Ref T13151. See PHI719. If you have something like a script which updates an object in a loop, we can end up queueing many search reindex tasks.
These tasks may reasonably contend for the lock, especially if the object is larger (lots of text and/or lots of comments) and indexing takes a few seconds.
This isn't concerning, and the indexers should converge to good behavior quickly once the updates stop.
Today, they'll spew a bunch of serious-looking lock exceptions into the log. Instead, just yield so it's more clear that there's (normally) no cause for concern here.
Test Plan: Ran `bin/search index Txxx --force` on a large object in multiple windows with a 0 second lock, saw an explicit yield instead of a lock exception.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19504
Summary:
Depends on D19502. Ref T13151. See PHI719. An install ended up with an object with 111,000+ comments on it because someone wrote a script to treat it like a logfile.
Although we seem to do mostly okay with this (locally, it only takes about 30s to index a similar object) we'll hit a wall somewhere (since we need to hold everything in memory), and it's hard to imagine a legitimate object with more than 1,000 comments. Just ignore comments past the first thousand.
(Conpherence threads may legitimately have more than 1,000 comments, but go through a different indexer.)
Test Plan:
- Piped some comments into `maniphest.edit` in a loop to create a task with 100K comments.
- Ran `bin/search index Txxx --force` to reindex it, with `--trace`.
- Before: task indexed in about 30s.
- After: script loaded comments with LIMIT 1000 and indexed in a couple seconds.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19503
Summary:
Ref T13151. See PHI719. One minor hiccup in debugging the issue (which ended up being "revision has 100K comments") was that the `SearchWorker` did not show which object it was indexing.
Add `'objectPHID'` to the queue call so you can see which object is affected from the web UI.
Test Plan:
- Stopped daemons.
- Used `bin/search index D123 --background` to queue a search task.
- Viewed task details in web UI from `/daemon/`.
- Before change: no indication of which object was being indexed.
- After change: page helpfully shows that the task is indexing D123.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19502
Summary:
Fixes T13159. Two issues here:
- When viewing a particular config setting, there's an extra "Config" crumb.
- On the page for a config group, the link to the parent group has an extra "/config/" in it.
Test Plan:
- Viewed a page for a particular setting, no longer saw an extra "Config" crumb.
- Viewed a page for a setting group, clicked parent crumb, got taken to a real page.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13159
Differential Revision: https://secure.phabricator.com/D19501
Summary:
Ref T13151. See PHI720. If you want to test if commit X appears on specific branch Y, `git branch --contains X -- Y` is faster than (effectively) `git branch --contains X | grep Y`.
Since this call has a "branch" parameter anyway, use it as the pattern argument if provided.
Test Plan:
- Called the API method with no parameters, got all branches.
- Called the API method with `master`, got just master.
- Called the API method with `maste*`, got master. This behavior is not officially supported and may change in the future.
- Viewed a commit, still saw all branches.
- Grepped for `diffusion.branchquery` and verified that no remaining callsites pass a default "branch" parameter.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19499
Summary: Fixes T13155. Ref T13151. A recent change (D19455) changed the return format here, but I missed this special case for empty commits.
Test Plan:
- T13155 has a good set of reproduction instructions.
- Pushed an empty commit.
- Before: bunch of warning log spew.
- After: clean logs.
Reviewers: amckinley, avivey
Reviewed By: avivey
Maniphest Tasks: T13155, T13151
Differential Revision: https://secure.phabricator.com/D19500
Summary: I landed D19491 a little aggressively, so allow this field to be null until after the migration goes out.
Test Plan: Loaded commits without identity objects; did not get any errors.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D19496
Summary: Ref T12164. Make it easier to work with identity objects by attaching them to commits and attaching users to identities.
Test Plan: Loaded some commits with `->needIdentities(true)` and checked the resulting objects.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12164
Differential Revision: https://secure.phabricator.com/D19491
