Summary:
See PHI180. Currently, if you begin creating or editing an inline and then swap display modes (for example, with "View Unified"), your edit is lost.
Persisting the editor state is complicated and this is very rare, so just prevent the action and warn the user instead.
Also make the warning persist for a little longer since a few of the messages, including this one, take a couple seconds to read now.
Test Plan:
- Edited a comment, tried to swap display modes, got a warning.
- Swapped display modes normally with no comment being edited.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18774
Summary:
Fixes paging on the Diffusion Repository List.
PhabricatorRepositoryQuery needs to specify a behavior for `null` on the OderableColumns definition for the `callsign` column.
See https://phabricator.wikimedia.org/T180457
Test Plan:
1. On an instance with more than 100 repositories
* some of which are missing a callsign
2. Attempt to sort by callsign.
3. See the sorted results
Previously:
3. Exception: "Column "0" has null value, but does not specify a null behavior."
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18773
Summary:
Depends on D18771. See PHI206. Currently, `arc diff --draft` only holds revisions in draft mode: it doesn't put them into draft mode if the install isn't configured to use draft mode.
Instead, make it a bit more forceful so that `arc diff --draft` can create into draft mode explicitly even if protoypes are off. This aligns with expection a little more clearly.
Test Plan: Ran `arc diff --draft` with prototypes off, got a revision held in draft mode.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18772
Summary: See PHI210. Ref T2543. Currently, we don't set this flag if you have prototypes off and don't get any of the new draft stuff, so the mail drops some of the details it is supposed to have.
Test Plan: Disabled prototypes, created a revision, saw summary / test plan in the initial mail.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18771
Summary:
Ref T13012. These flags can be exploited by attackers to execute code remotely. See T13012 for discussion and context.
Additionally, harden some Mercurial commands where possible (by using additional quoting or embedding arguments in other constructs) so they resist these flags and behave properly when passed arguments with these values.
Test Plan:
- Added unit tests.
- Verified "--config" and "--debugger" commands are rejected.
- Verified more commands now work properly even with branches and files named `--debugger`, although not all of them do.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13012
Differential Revision: https://secure.phabricator.com/D18769
Summary:
See PHI199. Ref T2543. When you run a RevisionQuery with a legacy status constraint (via `differential.query`), we currently don't match "Draft" revisions.
Use the actual complete map from `DifferentialRevisionStatus` instead of hard coding the status list so "Draft" is included.
Test Plan:
- Ran `differential.query` with `ids` and `status` for a draft revision.
- Before patch: revision not returned in results.
- After patch: revision returned in results.
(Note that it returns as "Needs Review", for compatibility.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18765
Summary:
See PHI190. This clarifies the ruleset a bit:
- If you accepted, then the author used "Request Review" explicitly, we now show "Accepted Earlier" instead of "Accepted" in the "Reviewers" list on the main revision page. This makes it sligthly more clear why the revision is back in your review queue without picking through the transaction log.
- Instead of moving all non-current accepts into "Ready to Review", move only voided accepts into "Ready to Review". This stops us from pulling older accepts which haven't been voided (which could have been incorrectly pulled) and correctly pulls older, voided accepts from before an update (for example: accept, then request review, then update) and generally aligns better with intent/expectation.
Test Plan:
- Accepted, requested review.
- Saw reviewer as "Accepted Earlier".
- Saw review in "Ready to Review" bucket.
- Accepted, updated (with sticky accept).
- Saw reviewer as "Accepted Prior Diff".
- Saw review as "Waiting on Authors".
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18764
Summary:
Ref PHI193. This method of enforcing policy checks is now (mostly) obsolete, and they're generally checked at the Controller/API level instead.
Notably, this method does not call `adjustObjectForPolicyChecks(...)` properly, so it can not handle special cases like "creating a project and taking its newly created members into account" for object policies like "Project Members".
Just remove these checks, which are redundant with checks elsewhere.
Test Plan:
- Set Project application default edit policy to "Administrators and Project Members".
- Tried to create a project as a non-administrator, adding myself.
- Before patch: policy fatal on a VOID object (the project with no PHID generated yet).
- After patch: object created properly. Got a sensible policy error if I didn't include myself as a member.
- Also verified that other edit rules are still enforced/respected (I can't edit stuff I shouldn't be able to edit).
- There's at least a bit of unit test coverage of this, too, which I updated to work via API (which hits the new broad capability checks) instead of via low-level transactions (which enforce only a subset of policy operations now).
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18763
Summary: See PHI195. This bulks out these API methods since all the requests are pretty straightforward.
Test Plan: Ran `edge.search` and `differential.revision.search`.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18762
Summary:
See PHI197. Populates "status" transactions and a few other obvious types where there's no security/performance/payload/formatting issue I can come up with.
The names here are the same as the names for editing with `maniphest.edit`.
Test Plan: Used `transaction.search` to retrieve transactions of all new types.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18761
Summary: Ref T12689. See PHI178. This isn't a complete solution (you may still get mailed via packages/projects) but should fix the obvious issue, where "Resigned" reviewers are incorrectly always sent mail directly.
Test Plan: Had Alice resign, interacted as Bailey, no mail to Alice.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12689
Differential Revision: https://secure.phabricator.com/D18758
Summary:
Depends on D18756. Fixes T12539. See PHI190. Currently, when this occurs:
- Alice accepts.
- Bailey requests review.
- Alice views her dashboard.
...the revision appears in "Waiting on Other Reviewers" (regardless of whether other reviewers actually exist or not).
Instead, ignore these voided/non-current accepts and let the revisions appear in "Ready to Review", which is more natural.
Test Plan: Went through the steps above. On `master`, saw revision in "Waiting on Other Reviewers". After patch, saw it in "Ready to Review".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12539
Differential Revision: https://secure.phabricator.com/D18757
Summary:
Ref T12539. See PHI190. Currently, each Diff has a `revisionID`, but Revisions do not point at the current active diff. To find the active diff for a given revision, we need to issue a separate query.
Furthermore, this query is inefficient for bulk loads: if we have a lot of revisions, we end up querying for all diff IDs for all those revisions first, then selecting the largest ones and querying again to get the actual diff objects. This strategy could likely be optimized but the query is a mess in any case.
In several cases, it's useful to have the active diff PHID without needing to do a second query -- sometimes for convenience, and sometimes for performance.
T12539 is an example of such a case: it would be nice to refine the bucketing logic (which only depends on active diff PHIDs), but it feels bad to make the page heavier to do it.
For now, this is unused. I'll start using it to fix the bucketing issue, and then we can expand it gradually to address other performance/convenience issues.
Test Plan:
- Ran migrations, inspected database, saw sensible values.
- Created a new revision, saw a sensible database value.
- Updated an existing revision, saw database update properly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12539
Differential Revision: https://secure.phabricator.com/D18756
Summary:
See PHI185. When looking at a revision, you can Command-Click (Mac) symbols to jump to their definitions (provided the symbol index has been built).
Currently, the code works on any node inside the changeset list, so it activates when clicking links inside inline comments and opening them in a new window.
To avoid this, don't activate if we're inside an inline comment. This technically prevents you from doing a symbol lookup on a symbol inside a codeblock inside an inline, but that seems fine/reasonable.
Test Plan: Wrote `Dxxx` in an inline, command-clicked it. Before: got a symbol lookup. After: just a new tab with the revision.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18753
Summary: Give profile images a little more space, fix "/" spacing, add a tooltip.
Test Plan: {F5251205}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18749
Summary:
Ref T2543. Fixes two relatively minor things:
- When builds finish in Harbormaster, send mail "From" the author.
- Set the `firstBroadcast` flag so that initial mail picks up earlier history (notably, the "reviewers" line).
For now, I'm not setting `firstBroadcast` on explicit "Request Review" (but maybe we should), and not trying to deal with weird cases where you leave a bunch of comments on a draft. Those might be fine as-is or may get tweaked later.
Test Plan: Created a revision with Harbormaster builds, ran builds, saw initial email come "From" the right user with more metadata.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18748
Summary: Depends on D18746. See PHI174. Adds small author portraits next to each blame line (this is similar to GitHub).
Test Plan:
My local test data isn't that great since I don't have commits from a lot of accounts, but looks functional:
{F5251056}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18747
Summary:
Ref PHI174. This reverts most of these changes:
- 37843127e9 / D18481
- 94cad30ac3 / D18474
- 12ae08b6b1 / D18473
- 0a01334172 / D18462
- ac91ab1ef9 / D18452
These changes made the Diffusion blame view very similar to GitHub's blame view. See D18452 for a before/after of the bulk of these changes; the other revisions are bugfixes.
I think this was generally a step backward, and not motivated by solving a specific problem. I've found the new UI less usable than the old one, and at least one install (see PHI174) also has.
In particular, the revision/commit titles are very bulky and not terribly useful; the date column also isn't terribly useful; the "age" color actually IS pretty useful and was heavily de-emphasized.
I've kept one bugfix here (missing `'a'` tag type) and kept the upgraded icon for "Skip Past This Commit".
I'm going to follow this up with some additional changes:
- Show a small author profile icon, similar to GitHub, to address PHI174 more directly.
- Try a zebra-stripe on blocks of rows to make it more clear where changes affected by a particular commit begin and end.
- Try a hue shift, not just a brightness/saturation shift, to make the "age" color more distinct.
- Try computing colors as even steps, not based purely on age. Currently, if a file has one long-distant commit and several recent commits, all the recent ones show up as very bright green. I think this would probably be more useful if they were distributed more evenly across the available color bands.
Test Plan:
Viewed blame views in Diffusion, saw a more compact UI similar to the old UI.
{F5251019}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18746
Summary: Ref T2543. After D18731, Herald build rules run more often, but now incorrectly try to run builds when Diffusion closes a revision because a commit landed.
Test Plan: Made some mundane updates locally; this is tricky to test comprehensively locally so I'm mostly planning to just push it to `secure`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18745
Summary:
Ref T2543. Instead of autosubmitting revisions to "Needs Review" when builds finish, allow them to be held in "Draft" indefinitely.
There's currently no UI for this. I plan to just expose it as `arc diff --draft` for now, in a followup change.
Test Plan:
- Created a revision (via Conduit) with "hold as draft", saw it hold as draft after builds finished.
- Created a revision (normally), saw it autosubmit after builds finished.
- Requested review of a "hold as draft" revision to kick it out of draft state.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18737
Summary:
Depends on D18740. Prepares `arc` to receive a `--draft` flag by letting us switch to "differential.revision.edit" instead of "differential.createrevision".
To "differential.revision.edit", we need a transaction list, but we can't automatically construct this list from a field map. Return the transaction list alongside the field map.
The next change uses this list (if available) to switch us to the modern API method.
Test Plan: Ran `arc diff` on the experiemntal branch with followup changes, got a new revision.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18741
Summary: See PHI90. For now, this only provides a limited amount of information, but should satisfy the use case in PHI90 and build toward a more complete version in the future.
Test Plan: Used new Conduit method to retrieve information about diffs.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18744
Summary:
Ref T2543. Fixes T10109.
Currently, Herald only runs in Differential when a change updates the diff. This is partly for historical reasons, and partly because we don't want to restart builds every time someone makes a comment. However, this behavior is inconsistent with other applications (which always trigger on any change), and occasionally confusing to users (in T10109, for example) or otherwise undesirable.
A similar issue is that T2543 has introduced a "Draft" state, where revisions don't send normal mail until builds finish. This interacts poorly with "Send me an email" rules (which shouldn't do anything here) and particularly with "Send me an email + only run these actions the first time the rule matches", since that might have an effect like "do nothing when the revision is created, then never anything again since you already did nothing once".
To navigate both of these issues, let objects tell Herald that certain actions (like mail or builds) are currently forbidden. If a rule uses a field or action which is currently forbidden, the whole rule automatically fails before it executes, but doesn't count toward "only the first time" as far as Herald's tracking of rule execution is concerned.
Then, forbid mail for draft revisions, and forbid builds for revisions which didn't just get updated. Forbidding mail fixes the issues with "Send me an email" that were created by the introduction of the draft state.
Finally, make Herald run on every revision update, not just substantive updates to the diff. This resolves T10109.
Test Plan:
Created revisions via the draft -> submit workflow, saw different transcripts. Here's a mail action being forbidden for a draft:
{F5237324}
Here's a build action being forbidden for a "mundane" update:
{F5237326}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T10109, T2543
Differential Revision: https://secure.phabricator.com/D18731
Summary: Depends on D18734. See PHI176. We run this query on the main Drydock lease web UI, among other places. There is currently no `status` key which can satisfy it.
Test Plan:
Viewed Drydock lease page to get the query.
Ran ##explain SELECT * FROM `drydock_lease` WHERE (status IN ('pending', 'acquired', 'active')) ORDER BY `id` DESC LIMIT 101;## before and after the change.
I don't have a ton of leases locally so the un-key'd EXPLAIN isn't //that// bad, but still shows that we're getting a better key. Before:
```
mysql> explain SELECT * FROM `drydock_lease` WHERE (status IN ('pending', 'acquired', 'active')) ORDER BY `id` DESC LIMIT 101;
+----+-------------+---------------+-------+---------------+---------+---------+------+------+-------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+---------------+-------+---------------+---------+---------+------+------+-------------+
| 1 | SIMPLE | drydock_lease | index | NULL | PRIMARY | 4 | NULL | 101 | Using where |
+----+-------------+---------------+-------+---------------+---------+---------+------+------+-------------+
1 row in set (0.00 sec)
```
After:
```
mysql> explain SELECT * FROM `drydock_lease` WHERE (status IN ('pending', 'acquired', 'active')) ORDER BY `id` DESC LIMIT 101;
+----+-------------+---------------+-------+---------------+------------+---------+------+------+---------------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+---------------+-------+---------------+------------+---------+------+------+---------------------------------------+
| 1 | SIMPLE | drydock_lease | range | key_status | key_status | 130 | NULL | 5 | Using index condition; Using filesort |
+----+-------------+---------------+-------+---------------+------------+---------+------+------+---------------------------------------+
1 row in set (0.00 sec)
```
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18735
Summary: See PHI176. Depends on D18733. We issue a query when deleting files that currently doesn't hit any keys.
Test Plan:
Ran `./bin/remove destroy --force --trace F56376` to get the query.
Ran ##SELECT * FROM `file` WHERE storageEngine = 'blob' AND storageHandle = '23366' LIMIT 1## before and after the change.
Before:
```
mysql> explain SELECT * FROM `file` WHERE storageEngine = 'blob' AND storageHandle = '23366' LIMIT 1;
+----+-------------+-------+------+---------------+------+---------+------+-------+-------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+-------+------+---------------+------+---------+------+-------+-------------+
| 1 | SIMPLE | file | ALL | NULL | NULL | NULL | NULL | 33866 | Using where |
+----+-------------+-------+------+---------------+------+---------+------+-------+-------------+
1 row in set (0.01 sec)
```
After:
```
mysql> explain SELECT * FROM `file` WHERE storageEngine = 'blob' AND storageHandle = '23366' LIMIT 1;
+----+-------------+-------+------+---------------+------------+---------+-------------+------+------------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+-------+------+---------------+------------+---------+-------------+------+------------------------------------+
| 1 | SIMPLE | file | ref | key_engine | key_engine | 388 | const,const | 190 | Using index condition; Using where |
+----+-------------+-------+------+---------------+------------+---------+-------------+------+------------------------------------+
1 row in set (0.00 sec)
```
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18734
Summary: See PHI176. This is issued periodically by the garbage collector. Normally this table is relatively small-ish so this missing key isn't hugely noticeable.
Test Plan:
Ran `./bin/garbage collect --collector daemon.processes --trace` to get the query the GC runs.
Ran ##DELETE FROM `daemon_logevent` WHERE epoch < 1508443504 LIMIT 100## before and after the key, saw a much better query plan afterward:
Before:
```
mysql> explain DELETE FROM `daemon_logevent` WHERE epoch < 1508443504 LIMIT 100;
+----+-------------+-----------------+------+---------------+------+---------+------+-------+-------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+-----------------+------+---------------+------+---------+------+-------+-------------+
| 1 | SIMPLE | daemon_logevent | ALL | NULL | NULL | NULL | NULL | 19325 | Using where |
+----+-------------+-----------------+------+---------------+------+---------+------+-------+-------------+
1 row in set (0.00 sec)
```
After:
```
mysql> explain DELETE FROM `daemon_logevent` WHERE epoch < 1508443504 LIMIT 100;
+----+-------------+-----------------+-------+---------------+-----------+---------+-------+------+-------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+-----------------+-------+---------------+-----------+---------+-------+------+-------------+
| 1 | SIMPLE | daemon_logevent | range | key_epoch | key_epoch | 4 | const | 1 | Using where |
+----+-------------+-----------------+-------+---------------+-----------+---------+-------+------+-------------+
1 row in set (0.00 sec)
```
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18733
Summary: See PHI176. We issue a query with only `artifactIndex` from `BuildTarget`, but don't have an applicable key.
Test Plan: This isn't on the normal Harbormaster execution path so I'm not 100% sure I have a local repro, but will confirm with customer.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18732
Summary: See PHI177. Ref T12974. PonderQuestion was overlooked during the Ferret engine conversions.
Test Plan:
Ran migrations, searched for questions, got results:
{F5241185}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12974
Differential Revision: https://secure.phabricator.com/D18736
Summary:
Ref T2543. When Harbormaster finishes builds and promotes a draft revision to review, we currently publish "Harbormaster requested review of...".
Instead, attribute this action to the author, since that's more natural and more useful.
Test Plan: Promoted a diff locally, saw it attributed to me rather than Harbormaster.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18730
Summary:
See PHI165. See D18715. These objects (projects, blogs) also need implementations now.
(I thought about making this method `abstract` or doing try/catch to maybe make this more robust, but I think this should be the end of it, and those changes have mild complexity/compatibility/risk issues.)
Test Plan: Changed `bin/search index` to index only one document of each type, ran `bin/search index --all --force`, saw no more comment-related errors.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18729
Summary:
Ref T12974. Ferret object queries SELECT a virtual "_ft_rank" column for relevance ordering.
Currently, they always SELECT this column. That's fine and doesn't hurt anything, but makes developing and debugging things kind of a pain since every query has this `, blah blah _ft_rank` junk.
Instead, construct this column only if we're actually going to use it.
Mostly, this cleans up DarkConsole / query logs a bit.
Test Plan:
Viewed normal query results on various pages, viewed global search results, ordered Maniphest tasks by normal stuff and by "Relevance".
Viewed DarkConsole, saw no more "_ft_rank" junk on normal pages.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12974
Differential Revision: https://secure.phabricator.com/D18728
Summary: Ref T12680. Use the slightly sleeker construction from D18722 in Differential.
Test Plan: Viewed revision list, reordered by date modified.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12680
Differential Revision: https://secure.phabricator.com/D18727
Summary:
Ref T12680. See PHI167. See that task for discussion.
Rewrite `DiffusionCommitQuery` to work more like `DifferentialRevisionQuery`, and use a UNION to find "all revisions you need to audit OR respond to".
I tried to get this working a little more cleanly than RevisionQuery does, and can probably simplify that now.
Test Plan: Poked at the UI locally without hitting any apparent issues, but my local data is pretty garbage at this point. I'll take a look at how the query plans work on `secure`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12680
Differential Revision: https://secure.phabricator.com/D18722
Summary:
Ref T2543. When a revision is created, we check if any builds are waiting/failed, and submit it for review immediately if we aren't waiting for anything.
In doing this, we ignore builds with only autotargets, since these are client-side and failures from local `arc lint` / `arc unit` should not count (the user has already chosen to ignore/skip them).
The way we do this has some issues:
- Herald may have started builds, but they may still be PENDING and not have any targets yet. In this case, we'll see "no non-autotargets" and ignore the build, which is wrong.
- We have to load targets but don't really care about them, which is more work than we really need to do.
- And it's kind of complex, too.
Instead, just let `BuildQuery` filter out "autobuilds" (builds generated from autoplans) with a JOIN.
Test Plan: Ran `arc diff` with builds configured, got a clean "Draft" state instead of an incorrect promotion directly to "Needs Review".
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18721
Summary:
See PHI158. In the RefEngine, we test if any old branch positions have been removed from the repository. This is uncommon (but not impossible) in Mercurial, and corresponds to users deleting branches in Git.
Currently, we end up running `hg log` for each position, in parallel. Because of Python's large startup overhead, this can be resource intensive for repositories with a large number of branches.
We have to do this in the general case because the caller may be asking us to resolve `tip`, `newfeature`, `tip~3`, `9`, etc. However, in the specific case where the refs are 40-digit hashes, we can bulk resolve them if they exist, like this:
```
hg log ... --rev (abcd or def0 or ab12 or ...)
```
In the general case, we could probably do less of this than we currently do (instead of testing all old heads, we could prune the list by removing commits which we know are still pointed to by current heads) but that's a slightly more involved change and the effect here is already dramatic.
Test Plan:
Verified that CPU usage drops from ~110s -> ~0.9s:
Before:
```
epriestley@orbital ~/dev/phabricator $ time ./bin/repository refs nss
Updating refs in "nss"...
Done.
real 0m14.676s
user 1m24.714s
sys 0m21.645s
```
After:
```
epriestley@orbital ~/dev/phabricator $ time ./bin/repository refs nss
Updating refs in "nss"...
Done.
real 0m0.861s
user 0m0.882s
sys 0m0.213s
```
- Manually resolved `blue`, `tip`, `9`, etc., got expected results.
- Tried to resolve invalid hashes, got expected result (no resolution).
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18717
Summary: Most of this document is no longer relevant, since we're happy to work on prototypes if you're paying us and no longer have any meaningful free support.
Test Plan: Read document.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18719
Summary: See rPcd14194a329788d5fff6365bcade278fd18f3612 for a similar change. Implement `getApplicationTransactionCommentObject()` to return `null` explicitly.
Test Plan: Ran `bin/search index --type ownerspackage`, got indexing after change.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18715
Summary: Ref T2543. When revisions are in the draft state, tell the user what we're waiting for or why they aren't moving forward.
Test Plan: {F5228840}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18714
Summary: Ref T2543. This is a less ambitious version of the rule in D18628, which I backed off from, since I think this probably still has a fair number of loose ends to tie up.
Test Plan: Created a revision locally.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18713
Summary:
Ref T13000. Since other changes have generally made the ngrams table manageable, I'm not planning to enable common ngrams by default at this time.
Instead, make the threshold configurable with "--threshold" so we can guide installs through tuning this if they want (e.g. PHI110), and tune hosted instances.
(This might eventually become automatic, but just smoothing this bit off for now feels reasonable to me.)
Test Plan: Ran with `--reset`, and with various invalid and valid `--threshold` arguments.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13000
Differential Revision: https://secure.phabricator.com/D18710
Summary:
Ref T13008. We haven't hit any issues with this, but I can imagine we might in the future.
When one host makes an intracluster request to another host, the `$viewer` ends up as the omnipotent viewer. This viewer isn't logged in, so they'll currently accumulate rate limit points at a high rate.
Instead, don't give them any points. These requests are always legitimate, and if they originated from a user request, that request should be the one getting rate limited.
Test Plan: Browsed around.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13008
Differential Revision: https://secure.phabricator.com/D18708
Summary:
Ref T13000. The new approach for dumping database-by-database means that we don't get CREATE DATABASE or USE statements, which makes importing the dump again inconvenient.
Manually stitch these into the dump.
Test Plan:
- Used `bin/storage dump --namespace ...` to dump a smaller local instance.
- Used `bin/storage destroy --namespace ...`, to destroy the namespace, then inported the dump cleanly.
- Verified that each CREATE DATABASE statement appears only once.
- Verified that `bin/storage renamespace --live` can correctly process this file.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13000
Differential Revision: https://secure.phabricator.com/D18707
Summary: See PHI147.
Test Plan: Called the method from the web UI, got sensible results.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18706
Summary:
Depends on D18702. Ref T13008. This replaces the old hard-coded single rate limit with multiple flexible limits, and defines two types of limits:
- Rate: reject requests if a client has completed too many requests recently.
- Connection: reject requests if a client has too many more connections than disconnections recently.
The connection limit adds +1 to the score for each connection, then adds -1 for each disconnection. So the overall number is how many open connections they have, at least approximately.
Supporting multiple limits will let us do limiting by Hostname and by remote address (e.g., a specific IP can't exceed a low limit, and all requests to a hostname can't exceed a higher limit).
Configuring the new limits looks something like this:
```
PhabricatorStartup::addRateLimit(new PhabricatorClientRateLimit())
->setLimitKey('rate')
->setClientKey($_SERVER['REMOTE_ADDR'])
->setLimit(5);
PhabricatorStartup::addRateLimit(new PhabricatorClientConnectionLimit())
->setLimitKey('conn')
->setClientKey($_SERVER['REMOTE_ADDR'])
->setLimit(2);
```
Test Plan:
- Configured limits as above.
- Made a lot of requests, got cut off by the rate limit.
- Used `curl --limit-rate -F 'data=@the_letter_m.txt' ...` to upload files really slowly. Got cut off by the connection limit. With `enable_post_data_reading` off, this correctly killed the connections //before// the uploads finished.
- I'll send this stuff to `secure` before production to give it more of a chance.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13008
Differential Revision: https://secure.phabricator.com/D18703
Summary:
Ref T13008. Depends on D18701. The overall goal here is to make turning `enable_post_data_reading` off not break things, so we can run rate limiting checks before we read file uploads.
The biggest blocker for this is that turning it off stops `$_FILES` from coming into existence.
This //appears// to mostly work. Specifically:
- Skip the `max_post_size` check when POST is off, since it's meaningless.
- Don't read or scrub $_POST at startup when POST is off.
- When we rebuild REQUEST and POST before processing requests, do multipart parsing if we need to and rebuild FILES.
- Skip the `is_uploaded_file()` check if we built FILES ourselves.
This probably breaks a couple of small things, like maybe `__profile__` and other DarkConsole triggers over POST, and probably some other weird stuff. The parsers may also need more work than they've received so far.
I also need to verify that this actually works (i.e., lets us run code without reading the request body) but I'll include that in the change where I update the actual rate limiting.
Test Plan:
- Disabled `enable_post_data_reading`.
- Uploaded a file with a vanilla upload form (project profile image).
- Uploaded a file with drag and drop.
- Used DarkConsole.
- Submitted comments.
- Created a task.
- Browsed around.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13008
Differential Revision: https://secure.phabricator.com/D18702
Summary:
Ref T13000. Garbage collecting common ngrams is slow because MySQL isn't all that great at deleting rows quickly. See PHI96, where it looks like it's going to take a week to GC ngrams for a ~million objects at a relatively conservative 0.15 threshold.
In the event of a restore, we can reduce the impact by persisting this table so the ngrams just don't get built when the reindex happens.
Test Plan: Viewed schema in Config, saw common ngrams tables marked as "Data" instead of "Index".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13000
Differential Revision: https://secure.phabricator.com/D18696
