Summary:
Ref T6755. Although we do not return response bodies, it is possible to perform crude portscanning if you can execute a DNS rebinding attack (which, for now, remains theoretical).
Limit users to 60 requests / hour to make it less feasible. This would require ~30 years to portscan all ports on a `/32` netblock.
Users who can guess that services may exist can confirm their existence more quickly than this, but if the attacker already had a very small set of candidate services it seems unlikely that portscanning would be of much use in executing the attack.
This protection should eventually be applied to T4190, too (that task also has other considerations).
Test Plan: Set rate limit very low, hit rate limit.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6755
Differential Revision: https://secure.phabricator.com/D12168
Summary:
Fixes T7602. This is similar to the existing behavior for "changes planned" and "needs revision" revisions.
Also fix the "Update Diff" workflow so it correctly selects closed revisions as attachable.
Test Plan: Updated an abandoned revision, saw it change to "Needs Review".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7602
Differential Revision: https://secure.phabricator.com/D12167
Summary:
Fixes T7664. When there are a large number of tasks (400+) with the same subpriority (which can happen if the subpriority features are rarely used), it may take more than 30 seconds to rebalance them.
Make the algorithm more aggressive about rebalancing homogenous blocks of tasks.
This may need to get even fancier, but I'd guess it can process blocks 1-2 orders of magnitude larger, which should be ~all installs.
(If someone still hits issues with this, I'll make it fancier.)
Once a block is rebalanced, it doesn't need to be rebalanced again (at least, not as a whole block) so we basically just need to get over the initial hurdle here and then we're good.
In the worst case, we can provide `bin/maniphest rebalance` or similar and do the rebalance step offline.
And, in any case, we have more test coverage here now.
Test Plan:
- Existing tests.
- New tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7664
Differential Revision: https://secure.phabricator.com/D12166
Summary: Enables a basic tooltip when using icon buttons and a convenience method for setting an icon.
Test Plan: Built a UIExample.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12172
Summary: Ref T1460, this adds additional buttons colors and styles for use in inline comments. Will also backport to Calendar and PHUIInfoView
Test Plan:
Review new buttons and hover states in UI Examples.
{F350549}
{F350550}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12162
Summary: Fixes T7586. If you can't edit a room, the pertinent UI is greyed out. One exception is the title of the room in the full viewer; this crumb is not disabled as it would be hard to read. Otherwise though, everything is disabled nicely.
Test Plan: tried to add participants when I wasn't allowed to and got an error. added participants otherwise okay. tried to edit title when i wasn't allowed and got an error. otherwise okay. left conpherence threads / rooms successfully.
Reviewers: epriestley, chad
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7586
Differential Revision: https://secure.phabricator.com/D12161
Summary: Ref T7660. I'm not toggling "inline-state-is-draft" correctly in JS yet since it's a little tricky (you can reload to see it) but the main state should work.
Test Plan:
- Clicked "done", saw comment opacity fade with placeholder style.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T7660
Differential Revision: https://secure.phabricator.com/D12160
Summary: Fixes T5658. Over a long period of time, some cruft can build up here. Only show revisions which have been updated in the last 30 days.
Test Plan:
- Viewed panel in Differential and Diffusion.
- Changed limit from 30 days to 30 seconds and saw no revisions.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5658
Differential Revision: https://secure.phabricator.com/D12158
Summary:
Ref T6755. This mitigates an attack where you:
- compromise an administrative account;
- configure "text/plain" as an "image" MIME type; and
- create a new macro sourced from a sensitive resource which is locally accessible over HTTP GET, using DNS rebinding.
You can then view the content of the resource in Files. By preventing the compromised account from reconfiguring the MIME types, the server will instead destroy the response and prevent the attacker from seeing it.
In general, these options should change very rarely, and they often sit just beyond the edge of security vulnerabilities anyway.
For example, if you ignore the warnings about an alternate file domain and elect to serve content from the primary domain, it's still somewhat difficult for an attacker to exploit the vulnerability. If they can add "text/html" or "image/svg+xml" as image MIME types, it becomes trivial. In this case not having an alternate domain is the main issue, but easy modification of this config increases risk/exposure.
Test Plan: Viewed affected config and saw that it is locked.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6755
Differential Revision: https://secure.phabricator.com/D12154
Summary: Fixes T6378.
Test Plan: Set config to `/.*/`, created a new diff, everything was collapsed as generated.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T6378
Differential Revision: https://secure.phabricator.com/D12159
Summary:
Ref T6755. This improves our resistance to SSRF attacks:
- Follow redirects manually and verify each component of the redirect chain.
- Handle authentication provider profile picture fetches more strictly.
Test Plan:
- Tried to download macros from various URIs which issued redirects, etc.
- Downloaded an actual macro.
- Went through external account workflow.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6755
Differential Revision: https://secure.phabricator.com/D12151
Summary: This signature changed at some point after I tested things and I didn't catch it.
Test Plan: Destroyed a chunked large file with `bin/remove`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12152
Summary:
Ref T7585. This implements everything specified, with a few caveats
- since rooms you have yet to join can't be viewed in the column yet, the column view has some bugs and isn't expected to work.
- the room you're looking at is just pre-pending to the top of the "recent" list
Test Plan: made a room that no one could join. verified when viewing that there was no comment ui. made a room that others could join. verified folks who had yet to join had a "join" button with an area for text. tried joining with / without message text and it worked in both cases
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7585
Differential Revision: https://secure.phabricator.com/D12149
Summary:
Ref T1266. We won't detect a move/copy if fewer than 3 lines are changed.
However, you may move a block like:
Complicated Line A
Trivial Line B
Complicated Line C
...where "Trivial Line B" is something like a curly brace. If you move this block somewhere that happened to previously have a similar trivial curly brace line, we won't be able to find 3 contiguous added lines in order to detect the copy/move.
Instead, consider both changed and unchanged lines when trying to find contiguous blocks. This allows us to detect across gaps where lines were not actually changed.
This new algorithm may be too liberal (for example, we may end up incorrectly identifying moved/copied code before or after changed lines, not just between changed lines), but we can keep an eye on it and tweak it. The algorithm is better factored and better covered, now.
Test Plan:
- Added a unit test for this case.
- Spot-checked a handful of diffs and generally saw behavior that made sense and looked better than before.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1266
Differential Revision: https://secure.phabricator.com/D12146
Summary:
Ref T1266. This doesn't change any behaviors, but some of this code has a lot of really complicated conditionals and I tried to break that up a bit.
Also, reexpress this stuff in terms of the "structured" parser in D12144.
Test Plan: Unit tests still pass. They aren't hugely comprehensive but did reliably fail when I screwed stuff up.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1266
Differential Revision: https://secure.phabricator.com/D12145
Summary:
Ref T1266. This prepares to fix case (2) on T1266 by improving the robustness of hunk parsing.
In particular, the copy detection code abuses this API because it isn't currently expressive or flexible enough.
Make it more flexible and cover it exhaustively.
I'll move callsites to the new stuff in upcoming revisions.
Test Plan: Unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1266
Differential Revision: https://secure.phabricator.com/D12144
Summary: Fixes T7578. This was pretty easy because conpherence funnels all transacton stuff through this spot
Test Plan: made a new room so only my user was a participant. wrote "@myself will work and @anotherguy will be greyed out" and so it was as expected
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7578
Differential Revision: https://secure.phabricator.com/D12114
Summary: Ref T7584. This hits all the major bullets there. Next step on T7584 is figuring out how it integrates into the full UI and column UI. That said, this is a bit buggy feeling right now since Conpherence as is assumes you are a participant all over the place and rooms make no such assumption. I'll probably this bit up next.
Test Plan:
viewed /conpherence/room/ and saw stuff. viewed the "participant" query as two different users and saw different correct result sets. made a room via the button and it worked. tried to view a room I wasn't a participant in and it failed horribly, which is something to fix in a future diff
created a thread via "send message" on a user profile and it worked
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7584
Differential Revision: https://secure.phabricator.com/D12113
Summary: Fixes T7377. We don't expand projects into members when sending notifications right now. Instead, expand them.
Test Plan:
- Added a project as a reviewer to a revision, made a comment, saw project members receive a read notification + email (with appropriate preferences).
- There's meaningful test coverage on the core mail stuff.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7377
Differential Revision: https://secure.phabricator.com/D12142
Summary:
Ref T5644. Ref T7472. Currently, we highlight each line of pattern search results in Diffusion.
- This is incredibly slow for non-PHP languages which need to shell out to Pygments.
- A lot of this highlighting isn't very useful anyway, because it doesn't have any context.
Instead, try to highlight pattern matches but don't highlight the source itself.
Test Plan: {F349637}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7472, T5644
Differential Revision: https://secure.phabricator.com/D12141
Summary:
Ref T5644. See some discussion in D8040.
When a file is very large (more than 64KB of text), don't activate syntax highlighting by default. This should prevent us from wasting resources running `pygmentize` on enormous files.
Users who want the file highlighted can still select "Highlight As...".
The tricky part of this diff is separating the headers into "changeset" headers and "undershield" (rendering) headers. Specifically, a file might have these headers/shields:
- "This file is newly added."
- "This file is generated. Show Changes"
- "Highlighting is disabled for this large file."
In this case, I want the user to see "added" and "generated" when they load the page, and only see "highlighting disabled" after they click "Show Changes". So there are several categories:
- "Changeset" headers, which discuss the changeset as a whole (binary file, image file, moved, added, deleted, etc.)
- "Property" headers, which describe metadata changes (not relevant here).
- "Shields", which hide files from view by default.
- "Undershield" headers, which provide rendering information that is only relevant if there is no shield on the file.
Test Plan:
- Viewed a diff with the library map, clicked "show changes", got a "highlighting disabled" header back with highlighting disabled.
- Enabled highlighting explicitly (this currently restores the shield, which it probably shouldn't, but that feels out of scope for this change). The deshielded file is highlighted per the user's request.
- Loaded context on normal files.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T5644
Differential Revision: https://secure.phabricator.com/D12132
Summary:
Ref T1460. Ref T6403. Replace `Diffusion::INLINEDONE` with `Transactions::INLINESTATE` and generalize things enough that we can lift it into core.
The next change will lift Differential's similar implementation into the core.
Also start implementing a fix for T6403, providing an alternate hook for optional builtin transactions.
Test Plan: Changed inline state in Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6403, T1460
Differential Revision: https://secure.phabricator.com/D12129
Summary:
Ref T1460. See D12126. This is essentially the same change, but for Diffusion.
This is a bit copy/pastey. I'm going to make an effort to lift inline handling into the core before pushing this in, so hopefully that will clean things up a bit.
Test Plan: Submitted stuff in Diffusion and got checkmarks to publish.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12128
Summary:
Ref T1460. When a revision author updates/comments/etc on a revision, publish all their checkmarks.
This doesn't handle Diffusion/audits yet.
Test Plan: {F346870}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: yelirekim, epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12126
Summary:
Ref T1460. This just barely works, but throwing it up in case any of it sounds mechanically crazy before we build integrations/UI/etc.
Specifically, these are the behaviors:
- You can mark your own draft comments as "done" before you submit them. The intent is to let reviewers mark their stuff advisory/minor/not-important before they submit it, to hint to authors that they don't expect the feedback to necessarily be addressed (maybe it's a joke, maybe it's just discussion, maybe it's "consider..").
- You can mark others' published comments as "done" if you're the revision/commit author. The intent is to keep this lightweight by not requiring an audit trail of who marked what done when. If anyone could mark anything done, we'd have to have some way to show who marked stuff.
- When you mark stuff done (or unmark it), it goes into a "draft" state, where you see the change but others don't see it yet. The intent is twofold:
- Be consistent with how inlines work.
- Allow us to publish a "epriestley updated this revision + epriestley marked 15 inlines as done" story later if we want. This seems more useful than publishing 15 "epriestley marked one thing as done" stories.
- The actual bit where done-ness publishes isn't implemented.
- UI is bare bones.
- No integration with the rest of the UI yet.
Test Plan: Clicked some checkboxes.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: paulshen, chasemp, epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12033
Summary:
Fixes T1102. If you don't use `arc`, the web workflow requires some extra needless steps when updating diffs.
Provide a more streamlined "Update Diff" workflow.
Test Plan: {F347750}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1102
Differential Revision: https://secure.phabricator.com/D12131
Summary:
Ref T6755. This is a partial fix, but:
- Allow netblocks to be blacklisted instead of making the feature all-or-nothing.
- Default to disallow requests to all reserved private/local/special IP blocks. This should generally be a "safe" setting.
- Explain the risks better.
- Improve the errors rasied by Macro when failing.
- Removed `security.allow-outbound-http`, as it is superseded by this setting and is somewhat misleading.
- We still make outbound HTTP requests to OAuth.
- We still make outbound HTTP requests for repositories.
From a technical perspective:
- Separate URIs that are safe to link to or redirect to (basically, not "javascript://") from URIs that are safe to fetch (nothing in a private block).
- Add the default blacklist.
- Be more careful with response data in Macro fetching, and don't let the user see it if it isn't ultimately valid.
Additionally:
- I want to do this check before pulling repositories, but that's enough of a mess that it should go in a separate diff.
- The future implementation of T4190 needs to perform the fetch check.
Test Plan:
- Fetched a valid macro.
- Fetched a non-image, verified it didn't result in a viewable file.
- Fetched a private-ip-space image, got an error.
- Fetched a 404, got a useful-enough error without additional revealing response content (which is usually HTML anyway and not useful).
- Fetched a bad protocol, got an error.
- Linked to a local resource, a phriction page, a valid remote site, all worked.
- Linked to private IP space, which worked fine (we want to let you link and redierect to other private services, just not fetch them).
- Added and executed unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6755
Differential Revision: https://secure.phabricator.com/D12136
Summary: Ref T7627. This centralizes this transaction construction code so the unit tests and Instances can both use it.
Test Plan: See D12116.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7627
Differential Revision: https://secure.phabricator.com/D12118
Summary: Fixes T7625. The way the regexp worked, "unusual" terminal characters required at least one character as a prefix in order to match. Allow 0 instead, so `#a1` matches.
Test Plan: Added and executed unit test.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7625
Differential Revision: https://secure.phabricator.com/D12123
Summary: Ref T7611. This should let us figure out the root cause, hopefully.
Test Plan: iiam
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7611
Differential Revision: https://secure.phabricator.com/D12124
Summary:
Fixes T7485. Before applications had proper policies, we gated access by requiring the viewer be an administrator.
This is now redundant (CAN_EDIT on applications has the same effect, and performs the same check), and may some day be wrong (we might let administrators configure a different policy to control who can configure applications). Today, it gets the policy dialog wrong.
Test Plan:
Clicked "Edit Policies" as a non-administrator, was unable to, got nice error:
{F346598}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7485
Differential Revision: https://secure.phabricator.com/D12125
Summary: Fixes T7620. I don't fully understand exactly what's going on here, but we don't actually need to call `flush()`.
Test Plan:
- Put timing code around the `echo`.
- Made a fake page that emitted a lot of data.
- Saw the `echo` block proportionate to data size under `curl --limit-rate ...`.
- See T7620.
- Downloaded a large file, got a reasonable progress bar and no obvious memory use issues.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: jlarouche, rbalik, epriestley
Maniphest Tasks: T7620
Differential Revision: https://secure.phabricator.com/D12127
Summary: Fixes T7647. We float both the time and description here and want the fluidity.
Test Plan: Review a new Conpherence in FF, Safari, Chrome.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7647
Differential Revision: https://secure.phabricator.com/D12137
Summary:
Fixes T7563. Fixes T5201. Reframe this as two separate operations:
- Move before or after a task.
- Move to the beginning or end of a priority.
Then:
- Make all the order queries unambiguous and properly reversible, with an explicit `id` order.
- Just reuse `ManiphestTask` to get results in the correct order.
- Simplify the actual transaction apply logic.
- Detect and recover from cases where tasks have identical or similar subpriorities.
Test Plan:
- Wrote and executed unit tests.
- Dragged and dropped tasks within priorities and between priorities in the main Maniphest view.
- Dragged and dropped tasks within priorities in the workboard view, when ordered by priority.
- Also poked at the "natural" order, but that shouldn't be affected.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: chad, epriestley
Maniphest Tasks: T5201, T7563
Differential Revision: https://secure.phabricator.com/D12121
Summary:
Via HackerOne. We aren't correctly escaping the date, so a user can XSS themselves by setting their date format creatively.
This construction is very unusual and I don't think we do anything similar elsewhere, so I can't come up with a systematic change which would prevent this in the general case.
Test Plan: Set date format to tag junk, got self-XSS before patch and proper escaping after the patch.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12117
Summary:
Fixes T7621. The engine selection code started out making sense, but didn't make as much sense by the time I was done with it.
Specifically, from the vanilla file upload, we may incorrectly try to write directly to the chunk storage engine. This is incorrect, and produces a confusing/bad error.
Make chunk storage engines explicit and don't try to do single-file one-shot writes to them.
Test Plan:
- Tried to upload a large file with vanilla uploader, got better error message.
- Uploaded small and large files with drag and drop.
- Viewed {nav Files > Help/Options}.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7621
Differential Revision: https://secure.phabricator.com/D12110
Summary:
Ref T7522. This is mostly useful in the cluster, but could be useful for external installs too.
If you want to import an instance into a test/dry-run state (in the cluster, to test an import; in the general case, to do something like test new hardware or configuration), you currently risk spamming users with a lot of duplicate notifications. In particular, if Phabricator tracks remotes, both instances will continue importing commits and sending email about them. Both instances will try to publish to mirrors, too, which could be bad news, and both instances will try to update linked services.
Instead, provide a flag to let an instance run in "silent mode", which disables all outbound messaging and data.
We need to remember to support this flag on any new outbound channels, but we add about one of those per year so I think that's reasonable.
Test Plan:
- Flipped config.
- Saw it void email, feed and mirroring.
- Didn't test SMS since it's not really in use yet and not convenient to test.
- (Can you think of any publishing I missed?)
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7522
Differential Revision: https://secure.phabricator.com/D12109
Summary: Fixes T7618. The "button" needs to be a PHUIButtonView later on.
Test Plan: Forced condition, loaded page, saw button instead of fatal.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7618
Differential Revision: https://secure.phabricator.com/D12108
Summary:
Indigo apparently used to be pink and was fixed in D10707.
This looks like it never got changed
Test Plan: Flag was purple, then it was pink
Reviewers: chad, #blessed_reviewers
Reviewed By: chad, #blessed_reviewers
Subscribers: epriestley, #flags
Differential Revision: https://secure.phabricator.com/D12101
Summary:
Ref T7149. When users give us dumpfiles for import, they will almost inevitably use the `phabricator` namespace. They need to be renamed to use an instance namespace.
We can do this either by:
- importing the data first, then renaming; or
- renaming first, then importing.
This implements the second one, basically `storage renamespace --in dump.sql --from phabricator --to instancename > instance.sql`.
Renaming first is a little hackier since we have to `preg_match()` a SQL dump file, but I think it's better overall:
- With only one database, it lets you dump/import without downtime.
- If you have development stuff in a development environment in the `phabricator` namespace, you don't have to move it aside to do an import.
- No possibility that two people doing an import at the same time on the same box will collide with each other.
- You can do the rename once and then repeat the import process with the renamed dump more easily.
- No tricky stuff with modern Phabricator running against an old dump and the database names not matching up.
None of this is super important, but it just makes large dumps a bit easier to work with, and the dumpfile format is regular enough that this seems unlikely to ever really not work.
Test Plan: Renamespaced a dump, did a `diff -u`, saw all the relevant parts changed (and only those parts changed).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12105
Summary: Ref T7582. Also adds the basic logic for "rooms" implementation. Also makes sure we use the initializeNewThread method as appropriate.
Test Plan: made a new conpherence and it worked!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7582
Differential Revision: https://secure.phabricator.com/D12103
Summary: Fixes T7583. We also add `key_room`, which uses isRoom and dateModified since a very common view of rooms is going to be ordered by last updated.
Test Plan: made the conpherence view controller query specify `withIsRoom(true)` and `withIsRoom(false)`. The former made the controller correctly 404 while the latter had no change in functionality.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7583
Differential Revision: https://secure.phabricator.com/D12102
Summary:
Ref T7607. Ref T7522.
- For the import tools, I want to send from "Phacility Support <support@phacility.com>".
- In the general case, I want to send billing mail from merchants (T7607) later on.
Test Plan: Sent an email and saw the desired "From" address.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7607, T7522
Differential Revision: https://secure.phabricator.com/D12100
Summary:
Ref T7522. This seems like the least-bad approach to a messy issue:
- When backfilling accounts from an imported instance, I need to write ExternalAccount rows to the instance to link instance accounts with upstream accounts.
- We do this in the daemons in some other cases, which lets us run all the code in the context of the instance. However, I really want to do this in-process here because it's way way simpler and we need to do writes to //both// the instance and the upstream, and they're interleaved, and they depend on one another.
- I can hard-code the query with `qsprintf()` but that feels like 100x worse than this.
This allows me to do this:
```
id(new PhabricatorExternalAccount())
->setForcedConnnection($instance_conn)
->...
->save();
```
...and get a write to the instance database, which is at least not completely a minefield.
Test Plan: Backfilled instance accounts and got interleaved instance and upstream writes as expected.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7522
Differential Revision: https://secure.phabricator.com/D12098
Summary: Conpherence Full modernize pass, setting standard space and colors on all widget panels. Moved menu back to 240px as the narrow column wasn't really usefull. Removed 'subtitle' on menu, seems simpler but almost under-designed. Subtitle isn't particularly useful and I plan on adding audience icons next (single, group, project, public) so I think this is the right direction.
Test Plan:
Tested with and without number columns on the menu, test with files, calendar dates, removing participants.
{F337941}
{F337942}
{F337943}
Reviewers: epriestley, btrahan
Reviewed By: btrahan
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12078
Summary:
Ref T7149. Currently, global drag and drop always uses the most open visibility policy on the install. This was appropriate before the application preference was introduced, but default to the application preference now.
In particular, this supports a default value of "Administrators" in the Phacility cluster.
Also simplify/clean up some code.
Test Plan:
- Set application default policy to "Adminstrators".
- Uploaded file via drag-and-drop, saw "administrators" policy.
- Uploaded file via `arc upload`, saw "administrators" policy.
- Saw better URI for a text file upload after patch.
- Uploaded file via drag-and-drop-to-textarea, saw "only viewer" policy.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12093
Summary: Rewrite this expression so that the second parameter to `qsprintf` is a scalar.
Test Plan: `arc lint`
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11913
Summary:
Fixes T6713. The idea is to keep checking what's going on in the update paths that touch the DOM. If we're doing an update or should be doing a different update, then we bail early.
This is the type of code + testing that makes me dizzy after awhile, but I think it works...
Test Plan:
added a "forceStall" parameter to the column view controller, which when specified sleeps for seconds before returning. I then augmented the JS such that the "send message" code for the durable column would specifiy this parameter.
For actual testing, I then spammed the heck out of the durable column channel and saw each message only once. I also spammed the column, switched browsers to a user on the same thread in the normal "speedy" view, sent messages there, and also only received one copy
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6713
Differential Revision: https://secure.phabricator.com/D12092
Summary:
Fixes T7545. Turns out we had the right logic to handle this basically, and just needed to variablize the CSS class that gets added / removed as appropos.
Note the new behavior is to keep the icon highlighted just with no number. This emulates how it would work if e.g. there was no unread message in the first place and you just clicked the message icon to invoke the message menu.
Test Plan: had a durable conpherence open for user A with user B. used a separate browser to send message as user B. reloaded as user A - saw new message in conpherence durable column and the "1" unread icon. I then clicked the "1" and saw it disappear as expected
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7545
Differential Revision: https://secure.phabricator.com/D12091
These parameters were set inconsistently. Use the value that the storage task uses.
Also, allow `bin/phortune invoice` to invoice in the past and future to aid testing.
Summary:
Ref T7149. We can simplify configuration somewhat by removing the upload limit setting, now that we support arbitrarily large files.
- Merge configuration documentation.
- Tell users to set things to at least 32MB. This is 8MB maximum one-shot file + 4x headroom. Chunk sizes are 4MB.
Test Plan:
- Faked all the setup warnings.
- Read documentation.
- Uploaded some files.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12083
Summary: Ref T7149. This works now, so enable it.
Test Plan:
- Uploaded large and small files in Firefox, Safari and Chrome.
- Uploaded large files with `arc upload`.
- Stopped/resumed large files with all clients.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12079
Summary: Ref T7149. This was just to make testing easier, but chunking substantially works now.
Test Plan: `grep`
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12076
Summary:
Right now, if a daemon dies it can leave the setup warning around for like 10 minutes or something until we reap it.
Tighten the warning so we only care about actively running daemons.
Test Plan: Checked setup issues.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12088
Summary: Ref T7149. Return a real iterator from the Chunk engine, which processes chunks sequentially.
Test Plan:
This is a bit hard to read, but shows the underlying chunks being accessed one at a time and only some being accessed when requesting a range of a file:
```
$ ./bin/files cat F878 --trace --begin 100 --end 256
...
>>> [10] <query> SELECT * FROM `file_storageblob` WHERE `id` = 85
<<< [10] <query> 240 us
better software.
Phabricat>>> [11] <query> SELECT * FROM `file_storageblob` WHERE `id` = 84
<<< [11] <query> 205 us
or includes applications for:
>>> [12] <query> SELECT * FROM `file_storageblob` WHERE `id` = 83
<<< [12] <query> 226 us
- reviewing and auditing source>>> [13] <query> SELECT * FROM `file_storageblob` WHERE `id` = 82
<<< [13] <query> 203 us
code;
- hosting and browsing >>> [14] <query> SELECT * FROM `file_storageblob` WHERE `id` = 81
<<< [14] <query> 231 us
repositories;
- tracking bugs;
```
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12073
Summary:
Ref T7149. This still buffers the whole file, but is reaaaaal close to not doing that.
Allow Responses to be streamed, and rewrite the range stuff in the FileResponse so it does not rely on having the entire content available.
Test Plan:
- Artificially slowed down downloads, suspended/resumed them (works in chrome, not so much in Safari/Firefox?)
- Played sounds in Safari/Chrome.
- Viewed a bunch of pages and files in every browser.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12072
Summary: Ref T7149. A couple diffs down the line, this will let us emit chunked files without doing all the work up front or holding the entire file in RAM.
Test Plan:
(Some newlines added for clarity.)
```
$ ./bin/files cat F942
ABCDEFGHIJKLMNOPQRSTUVWXYZ
$ ./bin/files cat F942 --begin 1
BCDEFGHIJKLMNOPQRSTUVWXYZ
$ ./bin/files cat F942 --end 10
ABCDEFGHIJ
$ ./bin/files cat F942 --begin 3 --end 5
DE
$
```
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12071
Summary: Ref T7149. We can't compute hashes of large files efficiently, but we can resume uploads by the same author, with the same name and file size, which are only partially completed. This seems like a reasonable heuristic that is unlikely to ever misfire, even if it's a little magical.
Test Plan:
- Forced chunking on.
- Started uploading a chunked file.
- Closed the browser window.
- Dropped it into a new window.
- Upload resumed //(!!!)//
- Did this again.
- Downloaded the final file, which successfully reconstructed the original file.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, chad, epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12070
Summary: Changes the text to just "Stay", which is still obvious what it means, with less copy. Fixes T7027
Test Plan: Now works on mobile.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7027
Differential Revision: https://secure.phabricator.com/D12075
Summary:
Ref T7149. This adds chunking support to drag-and-drop uploads. It never activates right now unless you hack things up, since the chunk engine is still hard-coded as disabled.
The overall approach is the same as `arc upload` in D12061, with some slight changes to the API return values to avoid a few extra HTTP calls.
Test Plan:
- Enabled chunk engine.
- Uploaded some READMEs in a bunch of tiny 32 byte chunks.
- Worked out of the box in Safari, Chrome, Firefox.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12066
Summary:
Ref T7149. This flags allocated but incomplete files and doesn't explode when trying to download them.
Files are marked complete when the last chunk is uploaded.
I added a key on `<authorPHID, isPartial>` so we can show you a list of partially uploaded files and prompt you to resume them at some point down the road.
Test Plan: Massaged debugging settings and uploaded README.md very slowly in 32b chunks. Saw the file lose its "Partial" flag when the last chunk finished.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12063
Summary:
Ref T7149. This makes debugging some of this stuff a bit easier by removing the HTTP part in the middle.
Particularly, I anticipate having this stream data chunk-by-chunk in the near future.
Test Plan: Ran `files cat F23`, got output.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12062
Summary:
Ref T7149. This isn't complete and isn't active yet, but does basically work. I'll shore it up in the next few diffs.
The new workflow goes like this:
> Client, file.allocate(): I'd like to upload a file with length L, metadata M, and hash H.
Then the server returns `upload` (a boolean) and `filePHID` (a PHID). These mean:
| upload | filePHID | means |
|---|---|---|
| false | false | Server can't accept file.
| false | true | File data already known, file created from hash.
| true | false | Just upload normally.
| true | true | Query chunks to start or resume a chunked upload.
All but the last case are uninteresting and work like exising uploads with `file.uploadhash` (which we can eventually deprecate).
In the last case:
> Client, file.querychunks(): Give me a list of chunks that I should upload.
This returns all the chunks for the file. Chunks have a start byte, an end byte, and a "complete" flag to indicate that the server already has the data.
Then, the client fills in chunks by sending them:
> Client, file.uploadchunk(): Here is the data for one chunk.
This stuff doesn't work yet or has some caveats:
- I haven't tested resume much.
- Files need an "isPartial()" flag for partial uploads, and the UI needs to respect it.
- The JS client needs to become chunk-aware.
- Chunk size is set crazy low to make testing easier.
- Some debugging flags that I'll remove soon-ish.
- Downloading works, but still streams the whole file into memory.
- This storage engine is disabled by default (hardcoded as a unit test engine) because it's still sketchy.
- Need some code to remove the "isParital" flag when the last chunk is uploaded.
- Maybe do checksumming on chunks.
Test Plan:
- Hacked up `arc upload` (see next diff) to be chunk-aware and uploaded a readme in 18 32-byte chunks. Then downloaded it. Got the same file back that I uploaded.
- File UI now shows some basic chunk info for chunked files:
{F336434}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12060
Summary: Fixes T7539. We need to set the "with-column" css class on the document body to make things like the jx-mask style-able. Also, make the global upload control only do it for the standard phabrcator page and not the document body.
Test Plan: dragged a file to conpherence column and it worked! uploaded a file to homepage with column open and it worked! uploaded a file to /file/ with column open and it worked!
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7539
Differential Revision: https://secure.phabricator.com/D12055
Summary:
Fixes T5843. File storage engines use a very old "selector" mechanism which makes them difficult to extend.
This mechanism predates widespread use of `PhutilSymbolLoader` to discover available implementations at runtime. Runtime discovery has generally proven more flexible and easier to use than explicit selection (although it sometimes needs more UI to support it in cases where order or enabled/disabled flags can not be directly determined).
Use a modern runtime discovery mechanism instead of an explicit selector. This might break any installs which subclassed the `Selector`, but I believe almost no such installs exist, and they'll receive a meaningful exception upon upgrading (any custom engines will no longer implement all of the required methods).
Looking forward, this modernizes infrastructure to prepare for new "virtual" chunked-storage engines, with the eventual goal of supporting very large file uploads and data import into the Phacility cluster.
This uses D12051 to add UI to make it easier to understand the state of storage engines.
Test Plan:
Used new UI panel to assess storage engines:
{F336270}
- Uploaded a small file, saw it go to MySQL engine.
- Uploaded a larger file, saw it go to S3 engine.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5843
Differential Revision: https://secure.phabricator.com/D12053
Summary:
Ref T7149. This is a few steps away, but:
- Generally, I'd like to reduce the amount of "Config" configuration we have.
- One good way to do this is to move it into UIs in Application configuration. We did this with email recently.
- I think this was a great change and I'd like to keep moving in this direction.
- T7149 touches configuration related to file storage engines. Although I'm not planning to fully move configuration into applications yet, it would be easier to debug and test if I could drop a read-only panel there to show engines.
- So, modularize the config stuff so I can add a new panel without hard-coding it.
Test Plan:
- Added, edited, and deleted application emails.
- Viewed non-email application detail pages.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12051
Summary: I left in an opacity change by mistake, and fix language on threads.
Test Plan: review in sandbox
Reviewers: epriestley, btrahan
Reviewed By: btrahan
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12054
Summary: This adds a parameter for time only on Conpherence Transactions, although grepping around, Conpherence might be the only user of this View at this point. Since we have the date markers separately, we can use just the timestamp for a cleaner feel. Also updated a bit of the spacing and colors to match Conpherence Full. Ref T7531
Test Plan:
A lot of Photoshop, and different types of chats.
{F336204}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7531
Differential Revision: https://secure.phabricator.com/D12049
Summary: I don't know the names of all the Conpherences I have ongoing and all my test icons are Psyducks. haha ha ...
Test Plan: Hover over icons, now it's all Psyduck and [No Title].
Reviewers: epriestley, btrahan
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12050
Summary: This makes macros and memes grow to 100% of their container //at most//, instead of showing a scrollbar. This is useful for overly large macros, smaller spaces like Feed and Conpherences, and Inline Comments. Fixes T7528
Test Plan: Tested a very large macro, a very large meme, and a very very tiny macro. It looks like memes get cached though, unsure if we should clean them up or just leave them
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7528
Differential Revision: https://secure.phabricator.com/D12045
Summary: Ref T7014. This got broken in today's action. For whatever reason the only way I can get the CSS to show up correctly is to move the require statement to where it was before rP5ef99dba2afc9f9ed3ca77707366a78be15f4871. Otherwise, this feature massages the UI a bit to make sure the "loading" stuff is set correctly in this state.
Test Plan: toggled conpherence open and it looked good. reloaded and it looked good.
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7014
Differential Revision: https://secure.phabricator.com/D12047
Summary: Ref T7014. This changes the title and selected icon right as the user clicks it. This could //maybe// be in the "willLoadThread" callback hook, but it doesn't happen every time we load a thread, just **this** time so keep it right in the listener for now.
Test Plan: switched some threads and liked what I saw
Reviewers: epriestley, chad
Subscribers: Korvin, epriestley
Maniphest Tasks: T7014
Differential Revision: https://secure.phabricator.com/D12043
Summary: Ref T7014. This just makes it so there's almost no UI and a simple "You have no messages. <button>Send a message.</button>" UI
Test Plan: hacked the code such that should_404 and conpherence were false and null respectively. verified i got the right ui in the durable column. verified send a message button worked, ending up with me in main conpherence view on the right message
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7014
Differential Revision: https://secure.phabricator.com/D12042
Summary: Numerous visual updates to the Durable Column, mostly to emulate current Conpherence look and feel.
Test Plan: Lots of little pixel chasing. Also Chrome, Firefox.
Reviewers: epriestley, btrahan
Reviewed By: btrahan
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12041
Summary:
This is cool in theory, but has broken like 5 times and is broken now too. The CSS magic just isn't robust enough to keep up with CSS changes.
Just strip it out for now; if we come up with some more durable replacement we can put that back in its place.
Test Plan: Typed konami code, page didn't break horribly.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12039
Summary: When you open the column, keep it open on future requests.
Test Plan: Opened column, clicked to Conpherence (no column), clicked elsewhere (column again), reloaded page (column), closed column, clicked something (no column).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12038
Summary:
Fixes T7060. Removes some hard-coding.
This assumes that "pages with no durable column" and "pages with no Quicksand" are the same, but that's correct today and I can't come up with a use case where they'd be different offhand.
Test Plan:
- Clicked a revision with column open, got Quicksand navigation.
- Clicked into Conpherence with column open, got real navigation.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7060
Differential Revision: https://secure.phabricator.com/D12036
Summary: Ref T7380. This does the most basic thing ever and sticks up to 6 icons in there.
Test Plan: clicked the icons and noted new conpherences loaded in nicely
Reviewers: epriestley, chad
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7380
Differential Revision: https://secure.phabricator.com/D12037
Summary:
Ref T5369. New HTML5 version without flash dependencies.
This doesn't play any sounds.
Test Plan: Did not play any sounds.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T5369
Differential Revision: https://secure.phabricator.com/D9535
Summary: Ref T7014. The main conpherence view is kind of broken without this in subtle ways because of /conpherence/ versus /conpherence/x/ init'ing things differently; this fixes that. Moves more normal view conpherence logic into threadManager. Makes all the display code happen outside of threadManager, setting us up for some display manager later maybe.
Test Plan: sent messages, updated title, etc and the messages pane auto scrolled correctly!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7014
Differential Revision: https://secure.phabricator.com/D12035
Summary:
Ref T7014. Fixes T7473. This adds a class to handle thread state about what thread is loaded and what transaction we've seen last. It is deployed 100% in the durable column and only partially deployed in the regular view. Future diff(s) should clean up regular view. Note ConpherenceThreadManager API might change a bit at that time.
Also includes a bonus bug fix so logged out users can't toggle this column
Test Plan: tried to use durable column while logged out and nothing happened. sent messages, aphlict-received messages, added people, and changed title from both views
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7473, T7014
Differential Revision: https://secure.phabricator.com/D12029
Summary:
Ref T2009. Ref T1460.
Fixes T2618. When users hit "Delete" on inline comments, delete immediately and offer them "Undo". If they delete indirectly (e.g., by clicking "Delete" from the preview at the bottom of the page), we still prompt them, because the "Undo" action either won't be available or may not be easy to find. This is a "refdelete".
Fixes T6464. This was just a mess. Make it not as much of a mess. It should work now. Pretty sure.
Fixes T4999. We did not refresh these links often enough to find targets for them, so they could race with content. Reevaluate them after loading new changes.
Test Plan:
- Deleted and undid deletion of inlines from main view and preview.
- Clicked "View" on inlines.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6464, T4999, T2618, T1460, T2009
Differential Revision: https://secure.phabricator.com/D12032
Summary:
Ref T2009. Ref T1460. The way Diffusion and Differential load inlines is horrible garbage right now:
- Differential does an ad-hoc query to get the PHIDs, then does a real load to policy check.
- Diffusion completely fakes things. In practice this is not a policy violation, but it's dangerous.
Make TransactionCommentQuery extensible so we can subclass it and get the query building correctly in the right Query layer.
Specifically, the Diffusion and Differential subclasses of this Query will add appropriate `withX()` methods to let us express the query in SQL.
Test Plan: Loaded, previewed, edited, and submitted inlines in Differential and Diffusion
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009, T1460
Differential Revision: https://secure.phabricator.com/D12026
Summary:
Ref T1460. Ref T2618.
When publishing a draft inline, mark the inline it replies to (if any) as replied to.
Also, don't load deleted comments as drafts (sets the stage for T2618).
I'll make an effort to clean up the loading mess here in the next revision, and find some more appropriate home for the shared code.
Test Plan: Made and replied to comments in Differential and Diffusion. Saw comments get marked as "Has Replies" and "Is Reply".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2618, T1460
Differential Revision: https://secure.phabricator.com/D12025
Summary: We respect this when adding inputs to the form, but not when guarding the actual fetch.
Test Plan: Reading
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12030
Summary: Ref T2009. These subclasses have a mixture of similar methods, move them all to the base class.
Test Plan: Created/edited/undo/submitted comments on the left and right sides of a diff.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12024
Summary: Ref T7014.
Test Plan: changed the conpherence title from the column. since i can't get scrolling to work, i inspect the dom to verify the title change transaction showed up properly
Reviewers: epriestley, chad
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7014
Differential Revision: https://secure.phabricator.com/D12002
Summary:
Ref T2009. This is another almost-identical copy of the row scaffolding, which has the same 1up/2up bugs as the 8 other copies of this code.
Turn the "undo" element into an InlineCommentView so we can scaffold it.
Then, scaffold it with the same code as everything else.
Test Plan: Hit "Undo", swapped from 1up to 2up, hit "undo" again, swapped back, tried left/right, everything rendered with proper scaffolding.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12019
Summary: Ref T2009. This has two more copies of the scaffolding.
Test Plan: Created, edited, deleted, replied to inline comments.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12018
Summary:
Ref T1460. Track and store which comments are threaded replies to other comments, vs merely appearing on the same lines.
This doesn't actually write `hasReplies` yet, since that needs to happen when we un-draft comments on submission.
Test Plan: Made inline comments in Differential and Diffusion, including replies. Replies were marked as "Is Reply".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12017
Summary: Ref T2009. Upgrade this from DetailView to ListView so we get "Highlight As", "View Unified", etc., and respect the unified diff prefernce.
Test Plan: Viewed diffs in Phriction.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12013
Summary:
Fixes T4452. Ref T2009. There's a hierarchy of changeset rendering power: only low-level calls, use of ChangesetDetailView, then use of ChangesetListView (a list of DetailViews).
Prior to work here, the various changeset rendering controllers got their hands dirty to varying degrees, with some using only the lowest-level rendering pipeline:
- Phriction: no view (lowest level)
- Diffusion: DetailView
- Differential Changeset: DetailView
- Differential Diff: ListView
- Differential Revision: ListView
I brought Phriction up to use DetailView, but want to bring everything all the way up to use ListView. Each composition layer adds more features to diff browsing. In particular, this change enables "Highlight As", switching 1up vs 2up, adding inlines, etc., on the standalone view.
Test Plan:
- Viewed a changeset standalone. Could change highlighting, switch 1up vs 2up, add and edit inlines, etc.
- Viewed a revision; no behavioral changes.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4452, T2009
Differential Revision: https://secure.phabricator.com/D12012
Summary: Fixes T7496, T7511. Sets text for registration is not enabled, sets can_manage on add_provider button.
Test Plan: Test with a logged in admin and logged in normal joe user.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7496, T7511
Differential Revision: https://secure.phabricator.com/D12014
Summary:
Ref T2009. Currently, the code figures out if a comment is on the left or right by looking at the `<th />` preceeding the enclosing `<td />`.
This gets the right result in 2-up, but in 1-up rows are always `<th />`, `<th />`, `<td />`, so it always detects every inline as being in the new file.
Because "old" and "new" cells aren't inherently distingushable in the 1up view, we can't use a DOM test for this at all. Instead, just track this state explicitly.
Test Plan:
- Made left/right comments in 1up view and 2up view.
- Viewed them in 1up and 2up views.
- Hovered in 1up and 2up views.
- Diff-of-diff'd and reviewed old/new comments, then made some more.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12011
Summary:
The "mlb" on the left nav creates a phantom bottom margin which gives the content measurable height but not scrollable height. Replace it with "plb" (padding) instead.
The 2px-spacer calculation was also not quite correct.
Test Plan:
- Viewed pages with navs; padding vs margin didn't seem to make any other differences.
- Scrollbar now stops in the right place in Safari, Chrome, Firefox.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12007
Summary: Renames the method in PHUIObjectBoxView to match the new PHUIInfoView class.
Test Plan: grepped codebase. Went to Calendar and tried a new status.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12005
Summary: Removes AphrontPanelView, and most of it's CSS - it seems some old previews still call it.
Test Plan: grep for AphrontPanelView, no callsites left. Verify CSS left is minimal needed.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7427
Differential Revision: https://secure.phabricator.com/D12004
Summary: Ref T2009. Still a touch glitch-ish but essentially functional now.
Test Plan: Viewed image diffs in 1up and 2up views. Made inline comments on them.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12003
Summary: Ref T2009. Remove the 4 (!!) copies of this code.
Test Plan:
- Added, edited, and removed inline comments in 2up view.
- Stacked a bunch of comments on the same line and saw the JS place them correctly.
- Created an image diff and added, edited and removed inlines on it.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12000
Summary: Ref T2009. This can now be removed.
Test Plan: Added, edited and deleted an inline comment in 1up view.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11998
Summary:
Ref T2009. Inline comments have "scaffolding", which is basically some empty table cells/rows around them to get the layout correct.
The scaffolding depends on the renderer, since the cells are different for side-by-side vs unified diffs.
This is currently duplicated all over the place:
- Edit view has 1up/2up.
- Detail view has 1up/2up.
- 1up renderer has 1up.
- 2up renderer has four separate copies of the 2up logic.
These all have subtle differences, which are mostly bugs. Start making the scaffolding more composable so we can get rid of that mess.
Test Plan: Added, edited, and removed inline comments on unified and side-by-side diffs.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11997
Summary:
Ref T2009. These classes are "Differential" now, but are used elsewhere in diff infrastructure (e.g., Diffusion).
- Rename them to "PHUIDiff".
- Move them to "src/infrastructure/".
- Give them a base class.
Test Plan: Interacted with inlines in unified and side-by-side views.
Reviewers: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11996
Summary:
Ref T2009. This tweaks things a bit more to improve consecuitive groups of added and removed lines.
Generally, it gives us "old, old, old, new, new, new" intead of "old, new, old, new, old, new".
Feelin' real good about having unit tests for this stuff.
Test Plan: Unit tests, looked at diffs in web UI.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11994
Summary: Uses standard sidenav width, more spacing in labels, added background around textarea, make background work in Firefox.
Test Plan:
Test Desktop, Mobile, and Tablet break points. Test Firefox and Chrome.
{F331201}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11993
Summary: This improves some cases with interleaved added and removed lines, and adds test coverage.
Test Plan:
- Added and executed unit tests.
- Viewed raw diff and saw sensible/expected output.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11992
Summary:
Ref T7014. This diff addresses
- getting it to be the right set of options
- add participant
- view in conpherence
- close window
- making those options work
- make it so if you are on /conpherence/ you can't toggle the durable column
Test Plan: inspected dom via chrome tools and found last transaction. added a participant and inspected the single new transactin added for accuracy. used view in conpherence action to view in conpherence. used close window action to close window
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7014
Differential Revision: https://secure.phabricator.com/D11991
Summary:
Ref T2009. This reduces how buggy inlines are. They're still buggy.
Specifically, the inline endpoint didn't know how to scaffold inlines before, so some of them ended up rendering in the wrong rows or breaking layouts.
This passes the current renderer through to the inline editor endpoint, so it can at least get the layout correct.
Test Plan: Interacted with inlines in unified and side-by-side views.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11988
Summary:
These aren't being populated yet; they mostly fix some JS errors with inlines.
For example, the inline hover reticle relies on adjusting its width to account for the "copy" column, and failed when the column did not exist.
Test Plan:
- Hovering inlines in unified now works, mostly.
- Interacted with inlines in side-by-side.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11985
Summary: Ref T2009. Unchanged lines should always go above inlines; we get nonsense results otherwise.
Test Plan: Inline now shows in correct place in unified view.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11987
Summary:
Ref T2009. Currently, lines don't get their "C123NL456" IDs set in the unified view. This is the major way that inlines are glued to changesets.
Simplify this rendering and bring it into the HTML renderer, then use it in the OneUp renderer.
Test Plan:
- Interacted with side-by-side inlines (hovered, added, edited, deleted), saw unchanged behavior.
- Interacted with unified inlines. They still don't work, but the error that breaks them is deeper in the stack.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11983
Summary: Ref T2009. I've clicked these links like 200 times in testing now, so I'm feeling pretty good about them.
Test Plan: Viewed links in side-by-side diff, clicked them.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11981
Summary: Ref T2009. It doesn't make sense to have these as separate behaviors. We require a ChangesetViewManager to track view parameter state.
Test Plan: Interacted with changesets in Phriction, Differential and Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11979
Summary:
Ref T2009. Currently, we do not persist view parameters when making context rendering requests.
The big one is the renderer (1up vs 2up). This makes context on unified diffs come in with too many columns.
However, it impacts other parameters too. For example, at HEAD, if you change highlighting to "rainbow" and then load more context, the context uses the original highlighter instead of the rainbow highlighter.
This moves context loads into ChangesetViewManager, which maintains view parameters and can provide them correctly.
- This removes "ref"; it is no longer required, as the ChangesetViewManager tracks it.
- This removes URI management from `behavior-show-more`; it is no longer required, since the ChangesetViewManager knows how to render.
- This removes "whitespace" since this is handled properly by the view manager.
Test Plan:
- Used "Show Top" / "Show All" / "Show Bottom" in 1-up and 2-up views.
- Changed file highlighting to rainbow, loaded stuff, saw rainbow stick.
- Used "Show Entire File" in 1-up and 2-up views.
- Saw loading chrome.
- No loading chrome normally.
- Made inlines, verified `copyRows()` code runs.
- Poked around Diffusion -- it is missing some parameter handling, but works OK.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11977
Summary:
Ref T2009. This clears the stage for D11977.
Specifically, D11977 moves "show context" logic into ChangesetViewManager, but those objects won't exist if we don't run "behavior-populate" first.
Generally, this increases consistency across changeset views -- which is still very low overall, but getting slightly better.
Both of these should probably move up more and use ChangesetListView, but we don't need to do that quite yet.
Test Plan:
- Took changeset actions in Phriction diff view.
- Took changeset actions in Differential standalone view.
- Took changeset actions in normal Differential view.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11978
Summary:
Ref T2009. This basically copy/pastes them for now. Plans is:
- Make this actually work all the way.
- Add test coverage after D11970.
- Move 2-up here after test coverage.
Clicking the links does not work yet, because they use the 2-up renderer. I'll fix this in the next diff.
Test Plan: Viewed diffs in unified, saw links to show more.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: chad, epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11976
Summary: Ref T2009. Remove forced min-width of 780px in 1-up mode, and tweak a few other things to look better.
Test Plan: Looks better on mobile.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11974
Summary: Ref T2009. These aren't good enough to actually use so I won't land this yet, but it makes testing changes a lot easier.
Test Plan:
- Swapped setting.
- Loaded revisions.
- Saw setting respected.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11972
Summary:
See D11468 and D11465. Fixes T5163. Fixes T4105. This makes it practical to test shields, unshielding, moves, etc.
This fixes the issue in D11468, where line maps from whitespace-ignored hunks could have fewer lines than line maps from whitespace-respected hunks, causing a warning.
This encodes the behavior which D11465 changed, making it the canon behavior. Specifically, we do **not** show a shield. I think this is correct. It seems misleading to show "the contents of this file were not changed", because they were changed in both the sense that the file was completely removed, and also changed in the sense that the content itself was (or may have been) changed at the destination. Instead, we just show nothing.
Test Plan:
- Added test coverage.
- Ran tests.
- Used `arc diff --raw --browse` to verify that web behavior was consistent with CLI/test behavior.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4105, T5163
Differential Revision: https://secure.phabricator.com/D11970
Summary: This ended up having a different signature; the discrepancy can cause a warning.
Test Plan: No more warning.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11971
Summary:
Ref T7014. This hooks up the durable column such that when you open it up it loads your most recent Conpherence. You can then switch amongst the various widgets and stuff and everything works nicely.
Except...
- scroll bar does not work
- also doesn't work at HEAD when I add a ton of text to the UI with no changes? (wrapped $copy in array_fill(0, 1000, $copy))
- "widget selector" does not collapse when you select something else
- this part wasn't really specified so I used the aphlict dropdown stuff. didn't want to keep working on that if this was the wrong UI choice
- can not edit title
- do we still want that to be done by clicking on the title, which pops a dialogue?
- can not add participants or calendar events
- what should this UI be? maybe just a button on the top for "participants" and a button on the bottom for calendar? both on top?
- this is not pixel perfect to the mock or two I've seen around. Aside from generally being bad at that, I definitely didn't get the name + timestamps formatting correctly, because the standard DOM of that has timestamp FIRST which appears second due to a "float right". Seemed like a lot of special-casing for what might not even be that important in the UI so I punted. (And again, there's likely many unknown ways in which this isn't pixel perfect)
There's also code quality issues
- `ConpherenceWidgetConfigConstants` is hopefully temporary or at least gets more sleek as we keep progressing here
- copied some CSS from main Conpherence app
- DOM structure is pretty different
- there's some minor CSS tweaks too given the different width (not to mention the DOM structure being different)
- copied some JS from behavior-pontificate.js to sync threads relative to aphlict updates
- JS in general is like a better version of existing JS; these should collapse I'd hope?
- maybe the aphlict-behavior-dropdown change was badsauce?
...but all that said, this definitely feels really nice and I feel like adding stuff is going to be really easy compared to how normal Conpherence is.
Also includes a bonus bug fix - we now correctly update participation. The user would encounter this issue if they were in a conpherence that got some updates and then they went to a different page; they would have unread status for the messages that were ajax'd in. This patch fixes that by making sure we mark participation up to date with the proper transaction in all cases.
Test Plan: hit "\" to invoke the column and saw nice loading UI and my latest conpherence load. sent messages and verified they received A-OK by looking in DOM console. toggled various widges and verified they rendered correctly. opened up a second browser with a second user on the thread, sent a message, and it was received in a nice asynchronous fashion
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7014
Differential Revision: https://secure.phabricator.com/D11968
Summary: Switch to modern components, crumbs, pht, object boxes.
Test Plan:
Test browsing a list, click edit, click new repository, click delete, verify all work as expected.
{F330864}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7427
Differential Revision: https://secure.phabricator.com/D11984
Summary: Makes this just a plain box (we don't have UI for table-in-form just yet).
Test Plan: Faked some connection data to view the display.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7427
Differential Revision: https://secure.phabricator.com/D11982
Summary: Pass this as true when building XHProf pages
Test Plan: Verify setDeviceReady exists in class PhabricatorBarePageView
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11980
Summary: The participant list can sometimes be `null`, which fails when we try to `array_fuse()` it.
Test Plan: Created a new thread cleanly.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11969
Summary:
Ref T6516. Although this behavior is somewhat-arguable as desirable, I think it's less surprising and more consistent to disable mentions when a repository is publishing.
In particular, if you import a repository developed on another Phabricator install, this stops all the `T123` in commit messages from creating mentions on your unrelated `T123` tasks.
We already disable autoclose, so `Closes T123` and `Ref T123` already have no effect, but a bare `T123` would generate a mention. Likewise, `@epriestley` would generate a mention.
If you import such a repository and then update it periodically, updates will activate autoclose and publishing (if you didn't disable them), but presumably this will hit a couple of tasks and you'll go change the settings if you forgot.
At some point, we may have some kind of use case for separating the "publish" setting into a "publish" setting and a "this is a local repository" setting. For example, if you work at Widget Corp, want to import Phabricator locally, //and// want to write Herald rules against it, you can't currently configure the repository to let you do all of this. But we haven't actually seen a use case for this yet.
Test Plan:
- Pushed some commits with bare `T11`, saw mentions.
- Disabled publishing for the repository, pushed some commits with
- Imported a bunch of commits without seeing pipeline failures.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6516
Differential Revision: https://secure.phabricator.com/D11966
Summary: Ref T4214. Reduce the need for installs to purge caches.
Test Plan:
{F329350}
- Changed header twice.
- New one showed up without dirtying cache.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4214
Differential Revision: https://secure.phabricator.com/D11965
Summary: Ref T6516. We incorrectly fail to set this flag on repositories created via Conduit, which activates too many actions on old commits.
Test Plan:
- Created a new repository via Conduit, verified it was "importing" after creation.
- Created a new repostiory via web UI, verified it was "importing" after creation.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6516
Differential Revision: https://secure.phabricator.com/D11964
Summary: Fixes T7454. We weren't triggering "Show Older" unless there were hidden events because of a previous interaction.
Test Plan:
- Set page size to 3.
- Viewed a task with ~10 transactions.
- Before patch:
- Only 3 most recent transactions visible, no way to see older ones.
- Saw "show older" appear, paged backward through transaction histroy.
- Also, interacted with task and then viewed it, made sure "show older" still works.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7454
Differential Revision: https://secure.phabricator.com/D11963
Summary: Update fund for new merchant authority stuff.
Test Plan:
- Created a secret initiative.
- Could see related activity as merchant.
- Could not see it not-as-merchant.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11959
Summary: Fixes T7392. I kind of stink at SQL so my approach here was to "start over" conceptually and this way makes the most sense to me - we basically do one join on the dependency table and then a second join back from the dependency table to the main task table. In the where clause we filter the resulting rows, first checking the data from dependency join for existence as appropros and then checking the second join for main task table for the proper "open" task values.
Test Plan: made a task X be blocked by task Y. closed task y. search for "not blocked" tasks and saw task X.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7392
Differential Revision: https://secure.phabricator.com/D11962
Summary: Update Owners per current UI standards, add crumbs at each level, removed AphrontPanels, check spacing.
Test Plan: Tested a list of owner packages, editing a package, creating a package, and various filters.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11961
Summary: Remove AphrontPanels, use standard UI, test for mobile, add phts
Test Plan: Faked a few facts for layout purposes.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11960
Summary: Swaps out to modern UI components, update for mobile, fix some phts.
Test Plan: Test each Daemon page on desktop and mobile. Verify modern layout.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7427
Differential Revision: https://secure.phabricator.com/D11958
Summary: Remove some AphrontPanels, add some phts, fix some table layouts.
Test Plan: Browse many Conduit pages, test a few calls.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7427
Differential Revision: https://secure.phabricator.com/D11957
Summary:
Ref T7439. Fixes T7438. This is only used in email right now.
Remain backward compatible.
Test Plan:
- Sent a message, saw a "Z" reply address.
- Checked the PHIDType.
- Grepped for `"E"` and `'E'`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7439, T7438
Differential Revision: https://secure.phabricator.com/D11956
Summary:
Fixes T7102. These panels don't work, aren't meaningful, and don't seem very useful.
We could eventually support providing context to dashboards somehow ("merchant dashboard") but don't have much of an apparent need for this.
Test Plan:
- Tried to create cart/subscription/charge dashboard panels.
- Unable to create new ones.
- The ones from before the change show a relevant error now.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7102
Differential Revision: https://secure.phabricator.com/D11953
Summary: We've processed some payments without anything going wrong now, and in the Phacility case we control all the payment amounts and the goods are essentially-virtual and billed-after-delivery anyway, so abuse is fairly difficult/pointless and presumably unlikely.
Test Plan: Paid an invoice and saw it go to completed immediately.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11951
Summary: See discussion in D11945. This finishes the rest of the merchant views to respect/use merchant authority in order to interact with objects.
Test Plan:
- As a merchant: accepted, refunded, updated, browsed orders.
- As a non-merchant: couldn't do any of that stuff for orders I don't own.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11950
Summary:
Currently, PhortuneAccounts have a very open default policy to allow merchants to see and interact with them.
This has the undesirable side effect of leaking their names in too many places, because all users are allowed to load the handles for the accounts. Although this information is not super sensitive, we shouldn't expose it.
I went through about 5 really messy diffs trying to fix this. It's very complicated because there are a lot of objects and many of them are related to PhortuneAccounts, but PhortuneAccounts are not bound to a specific merchant. This lead to a lot of threading viewers and merchants all over the place through the call stack and some really sketchy diffs with OmnipotentUsers that weren't going anywhere good.
This is the cleanest approach I came up with, by far:
- Introduce the concept of an "Authority", which gives a user more powers as a viewer. For now, since we only have one use case, this is pretty open-ended.
- When a viewer is acting as a merchant, grant them authority through the merchant.
- Have Accounts check if the viewer is acting with merchant authority. This lets us easily implement the rule "merchants can see this stuff" without being too broad.
Then update the Subscription view to respect Merchant Authority.
I partially updated the Cart views to respect it. I'll finish this up in a separate diff, but this seemed like a good checkpoint that introduced the concept without too much extra baggage.
This feels pretty good/clean to me, overall, even ignoring the series of horrible messes I made on my way here.
Test Plan:
- Verified I can see everything I need to as a merchant (modulo un-updated Cart UIs).
- Verified I can see nothing when acting as a normal user.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11945
Summary: This moves global search results to use standard UI, and hopefully allow us to easily add more information.
Test Plan:
Tested a number of open and closed task queries, tried a few users and projects. All seem to work well.
{F328075}
{F328078}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11948
Summary: Removes AphrontPanelViews from UIExamples
Test Plan: Tested new layouts in each of the pages.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7427
Differential Revision: https://secure.phabricator.com/D11947
Summary: Also exclude non-merchant cards.
Test Plan: Loaded subscription, saw better options in dropdown.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11943
Summary: This page doesn't actually exist and we don't really have any content to put on it right now.
Test Plan: No longer saw bogus link in subscriptions.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11942
Summary: Fixes T7434. We need to LEFT JOIN, not JOIN here, because we still want result rows where the value is `null`.
Test Plan: Issued blocked/not-blocked + blocking/not-blocking queries, got results in all cases.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7434
Differential Revision: https://secure.phabricator.com/D11939
Summary: Fixes T6815. This was overlooked in D9838. This could be prettier, but does the job.
Test Plan: {F327790}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6815
Differential Revision: https://secure.phabricator.com/D11937
Summary: Somewhat easier to parse and present information, with ICONS.
Test Plan:
Rebuilt current view with new layout. Tested toggling on and off some of the entries.
{F327816}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11938
Summary: Fixes T7425. Overall, this is surprising and confusing after jump nav was merged with global search.
Test Plan: Searched for "help", got documents matching the word "help".
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: chasemp, epriestley
Maniphest Tasks: T7425
Differential Revision: https://secure.phabricator.com/D11936
Summary:
Fixes T7424. Ref T6308.
Currently, there's no option to just add a card directly from the autopay UI. Add a button so this works.
Also, chip away at T6308 a bit. This isn't perfect but looks a little less out of place.
Test Plan:
{F327637}
- Added a payment method, then set it as autopay.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6308, T7424
Differential Revision: https://secure.phabricator.com/D11935
Summary: Fixes some UIExample UI issues, adds a new full-width setting for DocumentView
Test Plan:
Test UIExamples at desktop and mobile breakpoints
{F327446}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7431
Differential Revision: https://secure.phabricator.com/D11933
Summary:
Fixes T7422. We'll currently choose a "binary" charset with a "utf8_general_ci" collation on "sort" columns on older MySQL, which seems to be causing problems.
Choose "utf8" in this case instead.
(I attempted to simplify the logic, too, but that's the only actual change.)
Test Plan: Went back and forth with `--disable-utf8mb4` on `storage adjust`, but this is version dependent so I'm not 100% sure it's the right fix.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7422
Differential Revision: https://secure.phabricator.com/D11928
Summary:
Fixes T7422. After the recent fix for "sort" columns, we can end up with invalid SQL in some cases when running quickstart.
In particular, we do "COLLATE binary CHARACTER SET utf8_general_ci" (which is invalid).
Preprocess these so we get "COLLATE utf8 CHARACTER SET utf8_general_ci" (which is valid and correct).
Test Plan: Ran `bin/storage upgrade -f --namespace blahblhbaba` with and without `--disable-utf8mb4`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7422
Differential Revision: https://secure.phabricator.com/D11929
Summary: Fixes T7121.
Test Plan: Used `ssh-keygen -t ed25519` on an Ubuntu 14 box to generate a key; verified this is the header on the corresponding public key.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7121
Differential Revision: https://secure.phabricator.com/D11930
Summary: Adding better CSS and set correct tag and examples.
Test Plan: Test UIExamples, creating and click on similar task, empty task in Maniphest.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7423
Differential Revision: https://secure.phabricator.com/D11932
Summary: Fixes T7055. Omitting this from the crumbs is an improvement, but page titles like "New" seem better with a little more context.
Test Plan: Saw "Query:" in page titles only.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T7055
Differential Revision: https://secure.phabricator.com/D11931
Summary: Fixes T7406. Unbreak this oldschool code.
Test Plan:
```
GENERATING: PhabricatorPholioMockTestDataGenerator
Generated Mock: M8: Ipsum est eu enim magna do; reprehenderit.
Generated Mock: M9: Dolor est culpa esse cillum ullamco.
Generated Mock: M10: Lorem do cillum sint mollit: minim, in, aliqua esse.
```
Also created a mock normally, worked/looked fine.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7406
Differential Revision: https://secure.phabricator.com/D11924
Summary: Fixes T7308. Multiple users have encountered confusion around how they should specify a set or list in JSON; provide examples.
Test Plan:
```
epriestley@orbital ~/dev/phabricator $ ./bin/config set files.image-mime-types true
Usage Exception: Config key 'files.image-mime-types' is of type 'set'. Specify it in JSON. For example:
./bin/config set '{"value1": true, "value2": true}'
epriestley@orbital ~/dev/phabricator $ ./bin/config set cluster.addresses true
Usage Exception: Config key 'cluster.addresses' is of type 'list<string>'. Specify it in JSON. For example:
./bin/config set '["a", "b", "c"]'
epriestley@orbital ~/dev/phabricator $
```
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T7308
Differential Revision: https://secure.phabricator.com/D11925
Summary:
Fixes T7420. On Phacility, our ToS currently links to some policy documents, but users who haven't signed the ToS can't see them.
I've just created a blanket exemption and documented it; I //think// this is reasonable in all cases.
Test Plan: As an un-ToS'd user, viewed some other documents.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7420
Differential Revision: https://secure.phabricator.com/D11923
Summary: Fixes T7232.
Test Plan: Saw "View Raw" gone for removed comment, still present and functional for non-removed comment.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T7232
Differential Revision: https://secure.phabricator.com/D11926
Summary: Fixes T7421. Now that we join the task table again to ignore //closed// blockers, all the column names are ambiguous. Make them unambiguous.
Test Plan: Issued some searches with various different parameters.
Reviewers: btrahan, joshuaspence, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T7421
Differential Revision: https://secure.phabricator.com/D11922
Summary: This generates not-quite-correctly.
Test Plan: Clicked "Edit Subscription" on a Phortune subscription.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11921
Summary: Removes AphrontContext bar and uses PHUIInfoView instead. This also attaches to the ObjectBox instead for cleaner UI. Also moved phui-error-view.css which was missed.
Test Plan: Test creating a subtask or a new task, see updated info bar and action buttons.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11920
Summary: Since this element isn't strictly about errors, re-label as info view instead.
Test Plan: Grepped for all callsites, tested UIExamples and a few other random pages.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11867
Summary: Fixes T7398. Previously, we would redirect to get a token and then redirect back to make use of it, but lose "download" in the process, and thus not get the correct "Content-Disposition" header.
Test Plan: Clicked "Download" on a lightboxed file.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7398
Differential Revision: https://secure.phabricator.com/D11915
Summary:
Fixes T7379. Currently, builtin files generate with a "users" view policy even if an install is public.
Because these files TTL after 7 days, there's no migration here. Installs won't see the fix actually happen for up to 7 days after updating, though.
Test Plan:
- Deleted a builtin.
- Loaded projects page to regenerate it.
- Saw new builtin had most open policy and was marked as a builtin.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7379
Differential Revision: https://secure.phabricator.com/D11917
Summary: In D11722, a `getGroup()` method was added to all subclasses of `PhabricatorApplicationConfigOptions`, but no abstract method was added to the base class. This will fail if a custom `*ConfigOptions` class does not provide a `getGroup()` method, in which case `$group->getGroup()` (in `PhabricatorConfigListController`) will fatal.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11756
Summary: Just modernizing this a bit.
Test Plan: Ran `./bin/lipsum generate`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11907
Summary:
I was hitting the following error when attempting to use `./bin/lipsum generate`:
```
[2015-02-28 21:55:00] ERROR 2: array_rand(): Second argument has to be between 1 and the number of elements in the array at [/usr/src/phabricator/src/applications/pholio/lipsum/PhabricatorPholioMockTestDataGenerator.php:93]
arcanist(head=master, ref.master=d8182cf55d50), phabricator(head=master, ref.master=658175925931), phutil(head=master, ref.master=260e6105dee5)
#0 array_rand(array, integer) called at [<phabricator>/src/applications/pholio/lipsum/PhabricatorPholioMockTestDataGenerator.php:93]
#1 PhabricatorPholioMockTestDataGenerator::generateImages() called at [<phabricator>/src/applications/pholio/lipsum/PhabricatorPholioMockTestDataGenerator.php:30]
#2 PhabricatorPholioMockTestDataGenerator::generate() called at [<phabricator>/src/applications/lipsum/management/PhabricatorLipsumGenerateWorkflow.php:67]
#3 PhabricatorLipsumGenerateWorkflow::infinitelyGenerate(array) called at [<phabricator>/src/applications/lipsum/management/PhabricatorLipsumGenerateWorkflow.php:36]
#4 PhabricatorLipsumGenerateWorkflow::execute(PhutilArgumentParser) called at [<phutil>/src/parser/argument/PhutilArgumentParser.php:396]
#5 PhutilArgumentParser::parseWorkflowsFull(array) called at [<phutil>/src/parser/argument/PhutilArgumentParser.php:292]
#6 PhutilArgumentParser::parseWorkflows(array) called at [<phabricator>/scripts/lipsum/manage_lipsum.php:21]
```
Test Plan: Ran `./bin/lipsum generate` and received less errors.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11908
Summary: Fixes T7392. When filtering blocked/blocking Maniphest tasks, don't consider closed tasks.
Test Plan:
# Created `T1` and `T2` with `T2 depends on T1`.
# Marked `T1` as resolved.
# Searched for tasks "blocked by other tasks" and noted that `T2` wasn't in the result set.
Reviewers: btrahan, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7392
Differential Revision: https://secure.phabricator.com/D11911
Summary: This diff moves the default monospace font from a Global Default config value to CSS. What this will allow is some flexibility in changing this font in other areas (like Diviner and DocumentView) without changing the defaults globally. However if the admin sets a config value or a user sets a config value, that value will trump all settings in the CSS files with an !important declaration in the page head.
Test Plan:
Currently tested:
- Setting no value
- Setting an admin value
- Setting a user value
Verify remarkup blocks in Differential, Diviner, Conpherence, and Diffusion look as expected.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11597
Summary: Fixes T6944. Create the Aphlict PID directory if it does not exist. See also D11387.
Test Plan: Started Aphlict... saw PID directory created.
Reviewers: anton.vladimirov, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T6944
Differential Revision: https://secure.phabricator.com/D11906
Summary: There is a typo in one of the example mail test commands.
Test Plan: Read the command, maybe even paste it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: joshuaspence, epriestley
Differential Revision: https://secure.phabricator.com/D10072
Summary: Feed currently returns nothing is there are no stories, we can present a better view here by allowing a base and customizable set of errors. Fixes T7383
Test Plan:
Test a Project feed with no noDataSting and People with a noDataSting
{F321700}
{F321701}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7383
Differential Revision: https://secure.phabricator.com/D11897
Summary: Ref T7384. This just sends SIGHUP to specified overseers in a nice package.
Test Plan: See D11898.
Reviewers: hach-que, btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T7384
Differential Revision: https://secure.phabricator.com/D11899
Summary: This still needs some fine tuning, but wanted to get opinions. Using it on a laptop feels pretty good. This also moves `durable-column.css` into its own file since it'll likely continue to grow. Minor CSS tweaks to the near perfect rendition of durable column from pixel based mockups.
Test Plan:
Press \ on my laptop. Having issues with Chrome however, but FF and Safari work as expected.
{F322506}
Reviewers: epriestley, btrahan
Reviewed By: btrahan
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11901
Summary: Moves the setting from Core to UI, also adds a link to the task for further instructions.
Test Plan: Load up config in sandbox, see new instructions.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T4214
Differential Revision: https://secure.phabricator.com/D11900
Summary: See IRC. This check is somewhat misleading right now because it could arise from a mangled/broken Host header rather than a bad `phabricator.base-uri` configuration.
Test Plan: Faked this to trip, read all the text.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11894
Summary: Consolidate colors / spacing.
Test Plan:
Test embedding a paste, a list of pastes, and a PasteView for new colors, space.
{F321622}
{F321623}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11896
Summary: Fixes T7382, specifically we were drawing double navs, removed those from each page and added the correct CSS rule.
Test Plan: Test a number of people and profile pages with a footer set.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7382
Differential Revision: https://secure.phabricator.com/D11895
Summary:
Fixes T7287. This trades off 4-byte character support for case insensitivity in these columns, which is a much better trade on the balance.
Also adds more warnings about old MySQL. Note that we already issue a warning when you run "storage adjust" (which I've made stronger) and already "strongly recommend" MySQL 5.5 or newer in the install documentation.
Test Plan:
- Ran `storage adjust --disable-utf8mb4` to go to old definitions, then ran `storage adjust` to get back to the new ones. Everything seemed OK in both cases.
- Verified that utf8mb4 data can be migrated out of these colums with `--unsafe` (which will truncate).
- Verified that manual explains this.
- Faked my way into the setup warning.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7287
Differential Revision: https://secure.phabricator.com/D11893
Summary: For consistency, we switch back to base font in a few places when using alternate fonts like source-sans or monospace, this makes sure the base font is consistently reset.
Test Plan: Review a Document, a Diff, and a Legalpad form
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11891
Summary: Fixes T7165. Let users specify a file phid in config, and then use that file via an inline style tag. Also, cache the URI so that we don't have to query the file on every page load.
Test Plan: {F319050}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7165
Differential Revision: https://secure.phabricator.com/D11886
Summary: See IRC. This regressed at some point, probably when we fixed these rendering links-inside-links.
Test Plan: Viewed a flagged, closed task.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11885
Summary: See D11882 for context and rationale.
Test Plan:
- Ran `almanac.querydevices`.
- Ran `almanac.queryserices`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11883
Summary:
This already exists on the Query, just expose it via API.
For context, I want to fix `bin/remote restart` so it actually identifies the services on a box rather than faking it.
To do this, I'll look up the device PHID of the box, then look up all the services which are bound to it, then look up all the instances attached to those services. This allows me to do the second step.
Test Plan: Called method from web UI, got expected result.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11882
Summary: This wasn't actually being skipped for invites; really skip it.
Test Plan:
- Registered without invite, captcha.
- Registered with invite, no captcha.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11877
Summary: Fixes T7367
Test Plan: I guess noone every used this? Click on mobile menu, get not a 404.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7367
Differential Revision: https://secure.phabricator.com/D11880
Summary:
Ref T7352. Make sure modern `phd stop` can still read the old PID file format and stop the daemons, at least for now.
Without this, `stop` still detects them and tells you to `stop --force`, which works, but this makes things a good deal cleaner.
Test Plan: Ran `phd stop` from master, then `phd stop` from this revision. Saw old daemons stop cleanly.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11873
Summary:
Fixes T7352. This reduces the memory footprint for instances by combining these two similar daemons into one daemon which handles the responsibilities of both.
The fit isn't 100% perfect here but it's pretty close, and the GC daemon is fairly trivial.
Test Plan:
- Adjusted all the numbers to small numbers (5 second sleep, 120 second GC length).
- Added a ton of logging.
- Started trigger daemon.
- Saw it run a GC cycle.
- Saw it reschedule another cycle after 120 seconds (adjusted down from 4 hours).
- Reverted all the logging/small numbers.
- Ran `bin/phd start`, saw stable trigger daemon running.
- Grepped for removed daemon class name.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11872
Summary: Ref T7352. This is pretty straightforward. I renamed `phd.start-taskmasters` to `phd.taskmasters` for clarity.
Test Plan:
- Ran `phd start`, `phd start --autoscale-reserve 0.25`, `phd restart --autoscale-reserve 0.25`, etc.
- Examined PID file to see options were passed.
- I'm defaulting this off (0 reserve) and making it a flag rather than an option because it's a very advanced feature which is probably not useful outside of instancing.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11871
Summary:
Ref T7352. We were previously identifying things by `<daemonClass, overseerPID, startTime>` but that's not unique in a world where one overseer can run multiple daemons.
We already have an internal "daemonID", it just doesn't get written into the DB right now.
Start writing it, then use it to clean up `phd status`.
Test Plan: Ran `phd status`, got more accurate/useful output than previously.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11865
Summary:
Ref T7352. This isn't wildly useful for us but seems generally reasonable, can be helpful with testing, and @hach-que has a use case for it.
The only reason we issue this warning is to prevent user error; you can still launch all the daemons with `phd launch` manually and daemons all use locks to protect critical regions.
Test Plan: Ran `phd start --force` a bunch, saw zillions of daemons.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, hach-que
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11861
Summary:
Ref T7352. This moves all the daemons under one overseer. The primary goal is to reduce the minimum footprint of an instance in the Phacility cluster, by reducing the number of processes each instance needs to run on daemon-tier hosts.
This improves scalability by roughly a factor of 2.
Test Plan:
- Ran `phd debug`, `phd launch, `phd start`. Saw normal behavior, with only one total overseer.
- Fataled dameons and saw the overseer restar them normally.
- Used `phd status` and `phd stop` and got reasonable results (`phd status` is still a touch off).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11857
Summary: Ref T7352. This makes `phd stop` and `phd status` produce more reasonable output with the new PID file format.
Test Plan: Ran `phd stop`, `phd status`, etc.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11856
Summary:
Ref T7352. This changes `phd` to pass configuration to overseers over stdin. We still run one overseer per daemon.
The "status" stuff needs some cleanup, but it's mostly just UI/cosmetic.
Test Plan:
- Ran `phd debug`, `phd launch`, `phd start`, `phd status`, `phd stop`, etc.
- Verified PID files write in a reasonable format.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11855
Summary: Ref T7352. A couple of the APIs changed slightly with D11851.
Test Plan: See D11851.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11852
Summary: I missed testing this case when re-doing the navigation.
Test Plan: Test /project/, don't see fatal. Test mobile menu, works as expected.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11868
Summary: This sets $project at the controller level so it's available to building the icon nav and mobile menu, instead of guessing the $id. Fixes T7289
Test Plan: Test a project and its mobile menu when it does and does not have a workboard initialized. Also tested coming in via a slug and an id.
Reviewers: epriestley, btrahan
Reviewed By: btrahan
Subscribers: Korvin, epriestley
Maniphest Tasks: T7289
Differential Revision: https://secure.phabricator.com/D11848
Summary: I'm looking at beefing up PHUIErrorView for additional use cases as I remove some older AphrontViews. This will likely morph into PHUIInfoView and be a more lightweight version of PHUIObjectBox.
Test Plan:
UIExamples, mobile and desktop layouts. Have actual use cases coming in next diffs (may tweak design more then)
{F311943}
Reviewers: epriestley, btrahan
Reviewed By: btrahan
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11849
Summary: The mobile menu on people profiles has the incorrect order in the URLs and thus, 404s.
Test Plan: Went to a profile on a mobile display, click on feed and calendar links, got to correct place.
Reviewers: epriestley, btrahan
Reviewed By: btrahan
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11847
Summary:
We currently cache previews, but the vast majority of previews are never rendered again (e.g., they're a preview of someone partway through typing a comment).
Especially when editing large documents (Legalpad, Phriction), this can bloat the markup cache with data that will never be read and won't get purged for 30 days.
In particular, most of the data on `admin.phacility.com` is currently 1,000 previews of legalpad documents as I made minor edits to them over the course of several hours.
This isn't a big concern, but it's a very easy fix.
Test Plan:
- Previewed a legalpad document, verified that cache rows were not written as I mashed the keyboard.
- Saved the document, verified a new cache row was written.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11832
Summary: This is a useful capability in Phacility for disabled/suspended instances.
Test Plan: Used `bin/phortune invoice` to invoice a disabled instance, saw it decline to invoice.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11837
Summary: This extra space isn't needed
Test Plan: Visit most UIExample pages
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11845
Summary: We should only be adding space then a status is set, not a state.
Test Plan: Test on UIExamples, still renders as expected.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11844
Summary: Swaps out AphrontMiniPanelView usage with PHUIErrorView. Only used on homepage.
Test Plan:
Grepped for usage, only home. Revisit a new home, see modern componant.
{F310934}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11842
Summary: 4th times the charm? There is some confusion with Headers that could be simplified, obviously.
Test Plan: Read PHUIObjectBoxView and select correct method.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11841
Summary: The sky blue colors in the alerts was problematic in other color headers (not black). Rather than hand tweak each color, just going with white seems best. There is also a small animation now, which you may or may not like. It is playful and enjoyable to me at least.
Test Plan: Tested various header colors with and without alert notifications.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11838
Summary: Fixes T7325, T7326, T7328. When you have deleted a document already you have to specify content; this makes this more clear to the user in this specific delete pathway. Also, includes bonus bug fix for T7326 where we weren't moving the title of the wiki page with the rest of the page.
Test Plan: moved a wiki doc and verified it had the title I had specified. tried to delete an already deleted doc via setting the content to blank (i.e. hitting save after making some other edits) and got more clear error UI state
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7328, T7325, T7326
Differential Revision: https://secure.phabricator.com/D11829
Summary:
This just cleans things up a little:
- Don't show signature status if the document isn't signable.
- Show "Not Signable" instead of "No One" to make the meaning more clear in this context, where we don't have a "Who should sign:" sort of cue.
Test Plan: {F310538}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11834
Summary: This reads better?
Test Plan: reading
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11833
Summary: Fixes T7335. "help" gets you to a specific diviner doc which is an external link, so make sure the code sets is external for the redirect response in this case.
Test Plan: typed "help" and got some
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7335
Differential Revision: https://secure.phabricator.com/D11830
Summary: This increases the transparent space around the Phabricator logo. The logo itself is the same size. This allows for adding of other logos more easily without needing to alter the space provided. (Like Phacility)
Test Plan:
Reload page, screenshot logo, pull into Photoshop and verify spacing top and bottom.
{F309985}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11828
Summary:
Fixes T7229. Some usability issues around this controller - basically you can't leave comments with it and its not particular useful compared to the revision page.
Ergo, if there is a revision associated with a given diff, just re-direct back to the revision page with the proper diff loaded.
Test Plan: Tried to view a diff on the standalone controller attached to a revision and instead was re-directed to the revision view page with the proper diff loaded.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7229
Differential Revision: https://secure.phabricator.com/D11811
Summary:
Fixes T7298. There are two ways to import a repository that you want to host, today:
- Create it as "hosted", then push everything to it.
- Create it as "imported", let it import, then switch it to "hosted".
- (Neither of these work with SVN.)
We don't specifically recommend one or the other, although I believe both should work, and most users seem to go with the first one.
In the first workflow, the new empty repository imports completely and gets marked "imported", so our default behavior is then to publish commits. This can generate a lot of email/notification/feed spam.
If you're a fancy expert you might turn off "publish" before pushing, but normal users will frequently miss this.
Instead, when we receive an "import-like" push to an empty repository, put the repository back into "importing" after we accept the changes.
This has to be heuristic since we can't know for sure if a push is an import or new commits, but here's a simple rule that should do pretty well. We can refine it if necessary.
Test Plan:
- Created a new empty repository.
- Added some debugging code; verified the "commit count" and "empty" rules were calculated properly.
- Pushed 8+ commits and saw the repo go into "importing", import, and leave "importing".
- Pushed 8+ commits again and saw them publish.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7298
Differential Revision: https://secure.phabricator.com/D11827
Summary:
Ref T7298. We are currently inconsistent about when we publish feed, email, notifications, audits and Herald rules.
Specifically, there are two settings which impact these things:
- The "importing" flag, which is set when we're importing old commits.
- The "herald-disabled" flag, which was expanded in scope some time ago and now actually means "disable publishing".
Various parts of the pipeline were checking only one of these flags. Instead, all of them should check both.
(For example, we should never email users about importing repositories, nor trigger audits on them.)
Test Plan: See next revision.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7298
Differential Revision: https://secure.phabricator.com/D11826
Summary:
Ref T6840. This feels a little dirty; open to alternate suggestions.
We currently have a race condition where multiple daemons may load a commit and then save it at the same time, when processing "reverts X" text. Prior to this feature, two daemons would never load a commit at the same time.
The "reverts X" load/save has no effect (doesn't change any object properties), but it will set the state back to the loaded state on save(). This overwrites any flag updates made to the commit in the meantime, and can produce the race in T6840.
In other cases (triggers, harbormaster, repositories) we deal with this kind of problem with "append-only-updates + single-consumer", or a bunch of locking. There isn't really a good place to add a single consumer for commits, since a lot of daemons need to access them. We could move the flags column to a separate table, but this feels pretty complicated. And locking is messy, also mostly because we have so many consumers.
Just exempting this column (which has unusual behavior) from `save()` feels OK-ish? I don't know if we'll have other use cases for this, and I like it even less if we never do, but this patch is pretty small and feels fairly understandable (that said, I also don't like that it can make some properties just silently not update if you aren't on the lookout).
So, this is //a// fix, and feels simplest/least-bad for the moment to me, I thiiink.
Test Plan: Added and executed unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6840
Differential Revision: https://secure.phabricator.com/D11822
Summary: Fixes T6840. Depends on D11822, which is a little iffy.
Test Plan:
Verified all references to `importStatus` are either:
- SQL patches creating the column;
- reads;
- writes immediately before an insert; or
- explicit updates of the column.
That is, I identified no cases of `setImportStatus(X)->save()` on a Commit which may already exist. This //would// break that.
In general, almost all writes go through `$commit->writeImportStatusFlag()`, which is an explicit update.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6840
Differential Revision: https://secure.phabricator.com/D11823
Summary:
Ref T4340. The attack this prevents is:
- An adversary penetrates your network. They acquire one of two capabilities:
- Your server is either configured to accept both HTTP and HTTPS, and they acquire the capability to observe HTTP traffic.
- Or your server is configured to accept only HTTPS, and they acquire the capability to control DNS or routing. In this case, they start a proxy server to expose your secure service over HTTP.
- They send you a link to `http://secure.service.com` (note HTTP, not HTTPS!)
- You click it since everything looks fine and the domain is correct, not noticing that the "s" is missing.
- They read your traffic.
This is similar to attacks where `https://good.service.com` is proxied to `https://good.sorvace.com` (i.e., a similar looking domain), but can be more dangerous -- for example, the browser will send (non-SSL-only) cookies and the attacker can write cookies.
This header instructs browsers that they can never access the site over HTTP and must always use HTTPS, defusing this class of attack.
Test Plan:
- Configured HTTPS locally.
- Accessed site over HTTP (got application redirect) and HTTPS.
- Enabled HSTS.
- Accessed site over HTTPS (to set HSTS).
- Tore down HTTPS part of the server and tried to load the site over HTTP. Browser refused to load "http://" and automatically tried to load "https://". In another browser which had not received the "HSTS" header, loading over HTTP worked fine.
- Brought the HTTPS server back up, things worked fine.
- Turned off the HSTS config setting.
- Loaded a page (to set HSTS with expires 0, diabling it).
- Tore down the HTTPS part of the server again.
- Tried to load HTTP.
- Now it worked.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4340
Differential Revision: https://secure.phabricator.com/D11820
Summary:
Fixes T7310. We have a whole mechanism for surfacing update errors, but only surface actual update errors, not pull errors.
Instead, surface pull errors too.
Then format them a little more nicely.
Test Plan: {F309769}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7310
Differential Revision: https://secure.phabricator.com/D11821
Summary: Cleans up spacing, hides footer if nothing present, uses common colors.
Test Plan:
Write some typical for a designer code.
{F309840}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11824
Summary: Uses PHUIObjectBoxView to display lists of diffs in Differential and Diffusion, unless embedded on a dashboard.
Test Plan:
Test Dashboard panel, Differential home, Commit, and Diff
{F282173}
{F282174}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11659
Summary: Fixes a few issues. The author of the commit is more prominent / not cut off. Auditors is in a more consistent location. More space is available for reasons. Commits by themselves look much less janky. Only downside is actual Audits are now 3 lines vs. 2, but the extra space is used well.
Test Plan:
Test list of audits and commits.
{F309237}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11817
Summary: Third times the charm?
Test Plan: pray
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11816
Summary: Fixes T7319. These need a "%s" for the count where they had a "%d"
Test Plan: plan in D11812 is no longer a lie! (watcher added / removed strings render correctly)
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7319
Differential Revision: https://secure.phabricator.com/D11813
Summary: If we don't have a state in PHUIActionPanelView, don't set the extra padding to display it.
Test Plan: Review in UIExamples.
Reviewers: epriestley, btrahan
Reviewed By: btrahan
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11814
Summary: Fixes T7319. ...except I can't get this working in my sandbox? Changes to the translation file don't seem to show up. TEST PLAN IS A LIE
Test Plan: became a watcher, un became a watcher - saw sensical translated strings
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7319
Differential Revision: https://secure.phabricator.com/D11812
Summary: Fixes T7299. Also re-direct the user to the initial request uri if the signature was required.
Test Plan: made a signature required legalpad doc. visit the instance at a specific uri, signed the document, and ended up at that specific uri
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7299
Differential Revision: https://secure.phabricator.com/D11809
Summary:
Fixes the long uptake we saw on `meta.phacility.com`. I regressed this in D11795.
We make three calls to this method, but only one actually consumes the messages. The other two are just checking to see if there are any messages.
Only move the cursor up if we're actually going to process the messages.
Test Plan: Sort of tricky to test convincingly since it's inherently race-prone, but ran `debug pulllocal` and pushed update messages and saw it pick them up.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11808
Summary:
I am hitting this error when generating Diviner documentation:
```
COMMAND
'/usr/src/phabricator/bin/diviner' atomize --ugly --book $SOME_BOOK --atomizer 'DivinerPHPAtomizer' -- $SOME_PATHS
STDOUT
(empty)
STDERR
[2015-02-18 23:05:01] EXCEPTION: (RuntimeException) Undefined variable: type at [<phutil>/src/error/PhutilErrorHandler.php:210]
#0 PhutilErrorHandler::handleError(integer, string, string, integer, array) called at [<phabricator>/src/applications/diviner/atomizer/DivinerPHPAtomizer.php:315]
#1 DivinerPHPAtomizer::parseReturnType(DivinerAtom, XHPASTNode) called at [<phabricator>/src/applications/diviner/atomizer/DivinerPHPAtomizer.php:116]
#2 DivinerPHPAtomizer::executeAtomize(string, string) called at [<phabricator>/src/applications/diviner/atomizer/DivinerAtomizer.php:23]
#3 DivinerAtomizer::atomize(string, string, array) called at [<phabricator>/src/applications/diviner/workflow/DivinerAtomizeWorkflow.php:109]
#4 DivinerAtomizeWorkflow::execute(PhutilArgumentParser) called at [<phutil>/src/parser/argument/PhutilArgumentParser.php:396]
#5 PhutilArgumentParser::parseWorkflowsFull(array) called at [<phutil>/src/parser/argument/PhutilArgumentParser.php:292]
#6 PhutilArgument... (87 more bytes) ... at [<phutil>/src/future/exec/ExecFuture.php:416]
#0 ExecFuture::resolvex(NULL) called at [<phutil>/src/future/exec/ExecFuture.php:438]
#1 ExecFuture::resolveJSON() called at [<phabricator>/src/applications/diviner/workflow/DivinerGenerateWorkflow.php:349]
#2 DivinerGenerateWorkflow::resolveAtomizerFutures(array, array) called at [<phabricator>/src/applications/diviner/workflow/DivinerGenerateWorkflow.php:209]
#3 DivinerGenerateWorkflow::buildAtomCache() called at [<phabricator>/src/applications/diviner/workflow/DivinerGenerateWorkflow.php:170]
#4 DivinerGenerateWorkflow::generateBook(string, PhutilArgumentParser) called at [<phabricator>/src/applications/diviner/workflow/DivinerGenerateWorkflow.php:74]
#5 DivinerGenerateWorkflow::execute(PhutilArgumentParser) called at [<phutil>/src/parser/argument/PhutilArgumentParser.php:396]
#6 PhutilArgumentParser::parseWorkflowsFull(array) called at [<phutil>/src/parser/argument/PhutilArgumentParser.php:292]
#7 PhutilArgumentParser::parseWorkflows(array) called at [<phabricator>/scripts/diviner/diviner.php:21]
```
Test Plan: N/A
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11807
Summary: Use modern components, pht
Test Plan: I have no data locally, expect @epriestley to commandeer
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11805
Summary: Ref T7202.
Test Plan: Visited edit subscription page and it worked. Clicked edit link from subscription view page and got to the right place.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7202
Differential Revision: https://secure.phabricator.com/D11803
Summary: This change wraps the icon inline with the text, so smaller width icons have equal spacing between the border and text.
Test Plan:
review a number of different tag with icons, also UIExamples.
{F309048}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11802
Summary: Fixes T7317, allows public to be set on this list controller.
Test Plan: Tested a list of subscribers on a logged in and logged out Diff.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7317
Differential Revision: https://secure.phabricator.com/D11801
Summary:
Ref T6941. In the cluster (and in other reasonable setups) we've separated SSH load balancers from HTTP load balancers.
In particular, ELBs will not let you load balance port 22, so this is likely a reasonable/common issue in larger clusters in AWS.
Allow users to specify an alternate host for SSH traffic.
Test Plan: Set host to someting different, saw it reflected in UI.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6941
Differential Revision: https://secure.phabricator.com/D11800
Summary: Pretty basic, but you can now search panels by type (query, text, tab).
Test Plan: Searched for a few different types of panels, results look correct
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11782
Summary: This port is always HTTP, so use HTTP even if users have set the URI to "https".
Test Plan: Launched server and hit status page, status good.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11799
Summary: Fixes T7106. If you have bad credentials AND you've pushed an "update this repository" message into the queue, the loop above this level ends up resetting the timer every time we go through it, so the daemon spins in a loop failing forever.
Test Plan:
- Created a repo with bad credentials.
- Clicekd "updated now" to queue an update message.
- Saw daemon run in a loop.
- Applied patch, no loop.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7106
Differential Revision: https://secure.phabricator.com/D11795
Summary: Fixes T7284. We were initialized the project name to the empty string, which was making things work like a rename, including automagically adding the old slug.
Test Plan: made a project and no more "empty" tag being made. also don't have that bad transaction story anymore.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7284
Differential Revision: https://secure.phabricator.com/D11794
Summary: Even if you --force, we can't kill PID 0. This sends the process itself the signal, and terminates it.
Test Plan: See D11786.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11787
Summary: Fixes T7263. Last bit there was to upgrade this dialogue to let users know they are letting their primary email address be exposed in these flows. Depends on D11791, D11792, at least in terms of being accurate to the user as the code ended up strangely decoupled.
Test Plan: wordsmithin'
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7263
Differential Revision: https://secure.phabricator.com/D11793
Summary: Ref T7263. We need this in the oauth case and otherwise it makes sense to include.
Test Plan: used the conduit console and saw my email address included in the results!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7263
Differential Revision: https://secure.phabricator.com/D11791
Summary: Ref T7123. Turns out that we might throw ConduitClientException now in proxied scenarios. For all but one callsite remove the try / catch bit and don't issue the call for SVN. For the remaining callsite, also don't issue the call for SVN but keep in the exception logic since its renders a pretty error message in the non-proxied case?
Test Plan: played around with diffusion and things looked okay.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7123
Differential Revision: https://secure.phabricator.com/D11789
Summary: Fixes T7256.
Test Plan: Looked at rXPRF0a7a5f69f5d7 in a local instance. things looked great both pre and post patch.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7256
Differential Revision: https://secure.phabricator.com/D11790
Summary: Fixes T7294. This lets legalpad store other documents that don't need signatures but conceptually belong in legalpad.
Test Plan: made a document with signature type "no one" and it saved. viewed the document and noted no signing UI was present.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7294
Differential Revision: https://secure.phabricator.com/D11788
Summary:
In the cluster, the box has a ton of stuff that "looks like a daemon" beacuse it is some other instance's daemon.
Stop `phd restart` from complaining about this if given a "--gently" flag, which is like the opposite of "--force".
(I'll make it `stop --force` at the beginning of a whole-box restart to kill stragglers.)
Test Plan: Ran `bin/phd restart --gently`, etc.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11784
Summary:
Fixes T7291. There are a class of spam/annoyance attacks here that we should be more strict about preventing, since you can add an individual's address as a mailing list.
This application is likely on the way out so I didn't bother trying to do per-object policies.
Test Plan: Set policy restrictively and could no longer create or edit mailing lists.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7291
Differential Revision: https://secure.phabricator.com/D11783
Summary: Fixes T7295. Humbling debugging experience but I got it.
Test Plan: saved a legalpad doc without edits over and over and saw no "requires signature" transaction. toggled "requires signature", saved, and saw the transaction.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7295
Differential Revision: https://secure.phabricator.com/D11785
Summary: Fixes T7252. The UI is slightly different than in Maniphest - in Maniphest the error shows up at the bottom and here it shows up the top - but I think the UI here makes sense as you see the error right away on the newly returned dialogue?
Test Plan: set "created after" to "assdaasds" and got an error back. set filter to something that should work and it worked
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7252
Differential Revision: https://secure.phabricator.com/D11760
Summary:
Fixes T7130. Fixes T7041. Fixes T7012.
Major change here is partitioning clients. In the Phacility cluster, being able to get a huge pile of instances on a single server -- without needing to run a process per instance -- is desirable.
To accomplish this, just bucket clients by the path they connect with. This will let us set client URIs to `/instancename/` and then route connections to a small set of servers. This degrades cleanly in the common case and has no effect on installs which don't do instancing.
Also fix two unrelated issues:
- Fix the timeouts, which were incorrectly initializing in `open()` (which is called during reconnect, causing them to reset every time). Instead, initialize in the constructor. Cap timeout at 5 minutes.
- Probably fix subscriptions, which were using a property with an object definition. Since this is by-ref, all concrete instances of the object share the same property, so all users would be subscribed to everything. Probably.
Test Plan:
- Hit notification status page, saw version bump and instance/path name.
- Saw instance/path name in client and server logs.
- Stopped server, saw reconnects after 2, 4, 16, ... seconds.
- Sent test notification; received test notification.
- Didn't explicitly test the subscription thing but it should be obvious by looking at `/notification/status/` shortly after a push.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7041, T7012, T7130
Differential Revision: https://secure.phabricator.com/D11769
Summary: Fixes T7275. This makes the error stuff a little more consistent with other modern UIs.
Test Plan: {F307286}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7275
Differential Revision: https://secure.phabricator.com/D11778
Summary:
Right now, taskmasters on empty queues sleep for 30 seconds. With a default setup (4 taskmasters), this averages out to 7.5 seconds between the time you do anything that queues something and the time that the taskmasters start work on it.
On instances, which currently launch a smaller number of taskmasters, this wait is even longer.
Instead, sleep for the number of seconds that there are taskmasters, with a random offset. This makes the average wait to start a task from an empty queue 1 second, and the average maximum load of an empty queue also one query per second.
On loaded instances this doesn't matter, but this should dramatically improve behavior for less-loaded instances without any real tradeoffs.
Test Plan: Started several taskmasters, saw them jitter out of sync and then use short sleeps to give an empty queue about a 1s delay.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11772
Summary:
Fixes T7285. If the user tries to view a subscription they don't have permission to view, we may filter all the subscriptions out, then still try to load related data. This can fatal because it's invalid.
Instead, bail if we filtered everything.
Test Plan: Subscritption detail page of another user's subscription is now 404 instead of fatal.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T7285
Differential Revision: https://secure.phabricator.com/D11780
Summary:
At least one user wanted to type more text here, and it seems reasonable that administrators may want to write a couple of paragraphs.
I didn't make this short for any particular reason, I just wasn't sure what the workflow would look like as I was building it.
Test Plan: Loaded page, saw normal height text area.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11779
Summary:
This mentions "like GitHub", but we purged all the issues and no longer accept them.
Generally, feature requests should be coming to the upstream only nowadays.
Also, don't overpromise IRC.
Test Plan: Read documentation.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11777
Summary: Fixes T7273. This shows a better title (like "No Such Instance") instead of a generic one ("Unhandled Exception") when the user hits an AphrontUsageException.
Test Plan: Visited a nonexistent instance, got a nice title.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T7273
Differential Revision: https://secure.phabricator.com/D11771
Summary:
The correct conf variable is notification.pidfile, not notification.pid.
See also:
* src/applications/config/option/PhabricatorNotificationConfigOptions.php:58
* src/applications/aphlict/management/PhabricatorAphlictManagementWorkflow.php:34
Test Plan:
Grepped the whole source of Phabricator for occurences of `notification.pid`,
but all matches pointed to `notification.pidfile` instead.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11768
Summary: Ref T7150. Show some basic information instead of nothing.
Test Plan: Used these in Instances.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T7150
Differential Revision: https://secure.phabricator.com/D11767
Summary:
If your install isn't public, users can't see the Auth or People applications while logged out, so we can't load their invites.
Allow this query to go through no matter who the viewing user is.
Test Plan: Invite flow on `admin.phacility.com` now works better.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11765
Summary:
Ref T7185. These settings shouldn't be unlocked anywhere. Specifically:
- `reply-handler`: These are on the way out.
- `reply-handler-domain`: Also hopefully on the way out; locked because a compromised administrator account can redirect replies.
- `phabricator.cookie-prefix`: Not dangerous per se, but an admin could have a hard time fixing this if they changed it by accident since their session would become invalid immediately.
Test Plan: Browsed Config.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7185
Differential Revision: https://secure.phabricator.com/D11764
Summary:
Ref T7185. We currently have "locked", "masked", and "hidden" config.
However, "masked" does not really do anything. It was intended to mask values in DarkConsole, but Config got built out instead and "hidden" is strictly better in modern usage and protects against compromised administrator accounts. "hidden" implies "locked", so it's now strictly more powerful than just locked.
Remove "masked" and upgrade all "masked" config to "hidden". In particular, this hides some API keys and secret keys much more aggressively in Config, which is desirable.
Test Plan: Browsed things like S3 API keys in config and could no longer see them.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7185
Differential Revision: https://secure.phabricator.com/D11763
Summary: Pretty sure this was me derping, not trying to make a joke.
Test Plan: New text makes sense.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11762
Summary: Fixes T7159.
Test Plan:
Created a legalpad document that needed a signature and I was required to sign it no matter what page I hit. Signed it and things worked! Added a new legalpad document and I had to sign again!
Ran unit tests and they passed!
Logged out as a user who was roadblocked into signing a bunch of stuff and it worked!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7159
Differential Revision: https://secure.phabricator.com/D11759
Summary: Fixes T7088. Mainly this updates the documentation but I also snuck in tweaking how the domain reply handler is built. This does two main things -- makes the behavior consistent as some applications who didn't override this behavior would send out emails with reply tos AND makes it easier for us to deprecate the custom domain thing on a per application basis, which is just silly. On that note, the main documentation doesn't get into how this can be overridden, though I left in that mini blurb on the config setting itself. We could deprecate this harder and LOCK things if you want as well.
Test Plan: read docs, looked good. reasoned through re-factor
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7088
Differential Revision: https://secure.phabricator.com/D11725
Summary:
Ref T7143. This is the simplest fix for adding a new route for Home, at the cost of possibly letting users break instances. However:
- It's kind of hard to get to the option to uninstall Home anyway.
- It's hard to imagine anyone will really uninstall Home by accident, right? Right?
- Put a really scary warning on the action just in case.
Dashboards was only required because Home was required, I think, so just drop that too.
Test Plan: Uninstalled home.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: chad, epriestley
Maniphest Tasks: T7143
Differential Revision: https://secure.phabricator.com/D11753
Summary: Ref T7152. Gives us an event hook so we can go make users a member of any instance they've been invited to as soon as they verify an email address.
Test Plan:
- Used `bin/auth verify` to trigger the event.
- Build out the invite flow in rSERVICES.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7152
Differential Revision: https://secure.phabricator.com/D11752
Summary: Ref T7234. I didn't know about this spot in D11750.
Test Plan: ..the next diff really makes this work for the T7234 scenario.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7234
Differential Revision: https://secure.phabricator.com/D11751
Summary:
Ref T7234. Turns out some search engines are context specific such that they can't be bubbled up to a dashboard panel generically. The example in question is an Instance Members search, where the instance must be specified and is done so in normal codepaths but the dashboard panel stuff has no way of doing that. Ergo, just turn off these sorts of panels.
Note this code just makes it so we can turn off these sorts of panels but does not do any of that.
Test Plan:
made sure all the queries still showed up
otherwise, next diff
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7234
Differential Revision: https://secure.phabricator.com/D11750
Summary:
Ref T7152. Ref T1139. This updates Phabricator so third-party libraries can translate their own stuff. Also:
- Hide "All Caps" when not in development mode, since some users have found this a little confusing.
- With other changes, adds a "Raw Strings" mode (development mode only).
- Add an example silly translation to make sure the serious business flag works.
- Add a basic British English translation.
- Simplify handling of translation overrides.
Test Plan:
- Flipped serious business / development on and off and saw silly/development translations drop off.
- Switched to "All Caps" and saw all caps.
- Switched to Very English, Wow!
- Switched to British english and saw "colour".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7152, T1139
Differential Revision: https://secure.phabricator.com/D11747
Summary:
Ref T7184. I managed to write a phantom setup issue which fails normally and succeeds when looked at carefully, so clicking "you have open issues..." always cleared them. This made it very difficult to figure out what the problem was.
Show issue keys in the "title" attribute to make this sort of thing easier to deal with.
Test Plan: Moused over "You have issues..." text, saw issue key, quickly fixed issue with new information.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7184
Differential Revision: https://secure.phabricator.com/D11743
Summary:
Ref T7152. This substantially completes the upstream login flow. Basically, we just cookie you and push you through normal registration, with slight changes:
- All providers allow registration if you have an invite.
- Most providers get minor text changes to say "Register" instead of "Login" or "Login or Register".
- The Username/Password provider changes to just a "choose a username" form.
- We show the user that they're accepting an invite, and who invited them.
Then on actual registration:
- Accepting an invite auto-verifies the address.
- Accepting an invite auto-approves the account.
- Your email is set to the invite email and locked.
- Invites get to reassign nonprimary, unverified addresses from other accounts.
But 98% of the code is the same.
Test Plan:
- Accepted an invite.
- Verified a new address on an existing account via invite.
- Followed a bad invite link.
- Tried to accept a verified invite.
- Reassigned an email by accepting an unverified, nonprimary invite on a new account.
- Verified that reassigns appear in the activity log.
{F291493}
{F291494}
{F291495}
{F291496}
{F291497}
{F291498}
{F291499}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7152
Differential Revision: https://secure.phabricator.com/D11737
Summary:
Ref T7152. Ref T3554.
- When an administrator clicks "send invites", queue tasks to send the invites.
- Then, actually send the invites.
- Make the links in the invites work properly.
- Also provide `bin/worker execute` to make debugging one-off workers like this easier.
- Clean up some UI, too.
Test Plan:
We now get as far as the exception which is a placeholder for a registration workflow.
{F291213}
{F291214}
{F291215}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3554, T7152
Differential Revision: https://secure.phabricator.com/D11736
Summary:
Ref T7152. This implements the administrative UI for the upstream email invite workflow.
Pieces of this will be reused in Instances to implement the instance invite workflow, although some of it is probably going to be a bit copy/pastey.
This doesn't actually create or send invites yet, and they still can't be carried through registration.
Test Plan:
{F290970}
{F290971}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7152
Differential Revision: https://secure.phabricator.com/D11733
Summary: Ref T2783. This cleans up some more of the direct VCS access calls. If the repository is local, this boils down to an in-process call. If not, it uses Conduit to make an intracluster request.
Test Plan: Used `reparse.php --message <commit> --trace` to observe cluster request.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2783
Differential Revision: https://secure.phabricator.com/D11253
Summary:
Fixes T6484. I primarily need this to synchronize device public keys in the Phabricator cluster so the new stuff in T2783 works.
Although, actually, maybe I don't really need it. But I wrote it anyway and it's desirable to have sooner or later.
Test Plan: Ran method.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6484
Differential Revision: https://secure.phabricator.com/D11163
Summary: Groups setup issues into Important, PHP, MySQL, and Base for easier parsing on initial installations.
Test Plan:
Test my internal server and various issues.
{F289699}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7207
Differential Revision: https://secure.phabricator.com/D11726
Summary: Rename `DifferentialChangesetParser::WHITESPACE_IGNORE_FORCE` to `DifferentialChangesetParser::WHITESPACE_IGNORE_ALL` to better reflect reality.
Test Plan: Viewed a diff with various settings for the "Whitespace changes" option.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11730
Summary: This is correct, but the root cause of the issue isn't very clear to me.
Test Plan: Poked around various pages which filter objects.
Reviewers: joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11727
Summary: Rename `DifferentialChangesetParser::WHITESPACE_IGNORE_ALL` to `DifferentialChangesetParser::WHITESPACE_IGNORE_MOST`.
Test Plan: Browsed a diff with a few different settings for "Whitespace changes".
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11715
Summary:
Ref T7152. This builds the core of email invites and implements all the hard logic for them, covering it with a pile of tests.
There's no UI to create these yet, so users can't actually get invites (and administrators can't send them).
This stuff is a complicated mess because there are so many interactions between accounts, email addresses, email verification, email primary-ness, and user verification. However, I think I got it right and got test coverage everwhere.
The degree to which this is exception-driven is a little icky, but I think it's a reasonable way to get the testability we want while still making it hard for callers to get the flow wrong. In particular, I expect there to be at least two callers (one invite flow in the upstream, and one derived invite flow in Instances) so I believe there is merit in burying as much of this logic inside the Engine as is reasonably possible.
Test Plan: Unit tests only.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7152
Differential Revision: https://secure.phabricator.com/D11723
Summary:
Fixes T7092. When you name project "Foo" which has primary hashtag "foo" to "Foobar", post this patch the hashtag "foo" gets added as a secondary hashtag. Also makes sure we don't normalize the hashtags in the query function as the wikimedia folks were hitting an issue around capitalization on the hashtag.
Note that T6909 remains "broken" in that you get an error that you can't do that, though if you just omit the additional hashtag it would work fine. I think if a fix is necessary here the best bet would be to simply detect this particular scenario and let things proceed; its a bit tricky though since its about two transactions about to be applied and how they interact with one another...
Test Plan: Made project "Foo" which has primary hashtag "foo". Renamed it to "Foobar" and verified "foo" was added as a secondary hashtag and "foobar" was the primary hashtag. Renamed it again to "Foo" and noted that the hashtags all ended up correct.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7092, T6909
Differential Revision: https://secure.phabricator.com/D11697
Summary:
This makes thumbnail URIs work on instanced, CDN'd installs like Phacility cluster instances.
Some of these transforms can proabably be removed, but the underlying code to generate the transform should be cleaned up too and we have some other tasks filed elsewhere about this anyway.
Test Plan: CDN'd local install now loads thumbnails properly.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11719
Summary: Fixes T7153.
Test Plan:
used `bin/auth trust-oauth-client` and `bin/auth untrust-oauth-client` to set the bit and verify error states.
registered via oauth with `bin/auth trust-oauth-client` set and I did not have the confirmation screen
registered via oauth with `bin/auth untrust-oauth-client` set and I did have the confirmation screen
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7153
Differential Revision: https://secure.phabricator.com/D11724
Summary: I //think// Maniphest has switched to real edges now.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11716
Summary: I think this is safe to remove now.
Test Plan: WIP
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11717
Summary: Adds core and apps grouping to configuration options, makes it somewhat easier to browse config options.
Test Plan: Set each option, review list. Breakdown is nearly 50/50 apps/core.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11722
Summary: Minor spring cleaning, improve the visual feel of the comments table, more consistent structure.
Test Plan:
Test multiple comments, long comments, short comments, and multiple lines.
{F282462}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11666
Summary: Ref T7210. Not sure if this fixes things, but it's definitely //an// issue.
Test Plan:
- Not able to reproduce issue locally yet.
- These get into the map now, at least?
- Saw `.woff2` URIs transform in CSS.
- Loaded a `.woff2` file.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T7210
Differential Revision: https://secure.phabricator.com/D11720
Summary:
The generated HTML is like `<p>some text <div …>…</div> more text</p>`, and HTML `<p/>` tags may not contain block content like `<div/>` tags. Browsers actually parse this as if it was `<p>some text </p><div …>…</div> more text<p></p>` (sic).
The layout CSS class already has `display: inline` set, but this is not sufficient. Browser's HTML parser doesn't care what CSS rules will be applied, it only deals with the meanings of tags.
Fixes T7201.
Test Plan:
Verify that the following displays the image inline:
`some text {Fnnn,layout=inline} more text`
Reviewers: chad, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Projects: #remarkup
Maniphest Tasks: T7201
Differential Revision: https://secure.phabricator.com/D11706
Summary: Adds option for setting large text instead of icons. Adds success state.
Test Plan:
Built some more examples.
{F286388}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11710
Summary: Super duper sized panels for singluar actions.
Test Plan:
UIExamples, will need more testing in Phacility.
{F286098}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11709
Summary:
Ref T7208. Now that we have approvals (new installs are safe by default), take those into account when generating this warning.
Try to soften the warning to cover the case discussed in T7208, hopefully without requiring additional measures.
Test Plan:
{F286014}
{F286015}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T7208
Differential Revision: https://secure.phabricator.com/D11708
Summary: Uses more standard boxes for display, and icons!
Test Plan:
Test with all enabled, all disabled, and a mix.
{F285945}
{F285946}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11707
Summary: Ref T7153. The "whoami" scope should be default and always on, because otherwise we can't do anything at all. Also, if a client doesn't want a certain scope, don't bother asking the user for it. To get there, had to add "scope" to the definition of a client.
Test Plan: applied the patch to a phabricator "client" and a phabricator "server" as far as oauth shenanigans go. Then I tried to login / register with oauth. If the "client" was configured to ask for "always on" access I got that in the dialogue, and otherwise no additional scope questions were present. Verified scope was properly granted in either case.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7153
Differential Revision: https://secure.phabricator.com/D11705
Summary: mysqldump output can end up having weird encoding issues when raw BLOBs are in the output, preventing the backup restoration from succeeding. This hex-encodes blobs in the dump from the backup workflow causing the output file to only contain ASCII and ensure imports are successful.
Test Plan: Had issues restoring a backup from the original `mysqldump` command issued by this workflow. Ran the same command with this flag added and I was able to restore the backup.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11704
Summary: Ref T7153. I am not sure if this is 100% correct because sometimes you have to POST vs GET and I don't know if the redirect response will / can do the right thing? I think options to fix this would be to 1) restrict this functionality to JUST the Phabricator OAuth provider type or 2) something really fancy with an HTTP(S) future. The other rub right now is when you logout you get half auto-logged in again... Thoughts on that?
Test Plan: setup my local instance to JUST have phabricator oauth available to login. was presented with the dialog automagically...!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7153
Differential Revision: https://secure.phabricator.com/D11701
Summary: Fixes T7142. Make old permission mean "make (non-bot) users" and then nuance the UI for those administrators who can make bot accounts.
Test Plan: loaded up admin a with full powers and admin b with restricted powers. noted admin a could make a full user. noted admin b could not make a full user. noted admin b got an error even via clever uri hacking.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7142
Differential Revision: https://secure.phabricator.com/D11702
Summary: `ssh-keygen` declines to run on a too-public key. Write the correctly-restricted key a little earlier in the workflow.
Test Plan:
```
epriestley@orbital ~/dev/phabricator $ chmod 644 ~/dev/core/conf/keys/daemon.key
epriestley@orbital ~/dev/phabricator $ ./bin/almanac register --private-key ~/dev/core/conf/keys/daemon.key --identify-as local.phacility.net --device daemon.phacility.net --force --allow-key-reuse
Installing public key...
Installing private key...
Installing device ID...
HOST REGISTERED This host has been registered as "local.phacility.net" and a trusted keypair has been installed.
epriestley@orbital ~/dev/phabricator $
```
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11700
Summary:
I'm hitting this in the cluster and couldn't figure it out after staring at it for a couple minutes. Produce a better error.
This dumps a hash of each configuration key value which is set to a non-default value into the daemon log. This is much more compact than the full config, and doesn't spread secrets around, so it seems like a good balance between providing information and going crazy with it.
Test Plan: {F284139}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11699
Summary: This got clobbered in D11547. Revive the code but move it up from the base class to the PeopleList controller which is presumably all the main "admin" views. Fixes T7181.
Test Plan: Saw the button once more on /people/...!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7181
Differential Revision: https://secure.phabricator.com/D11698
Summary:
Fixes T7169. We just weren't doing a policy-aware query. Basic idea here is that if you set an app to be visible only to specific users, those specific users are the only ones who should be able to authorize it.
In the Phacility cluster, this allows us to prevent users who haven't been invited from logging in to an instance.
Test Plan:
- Tried to log into an instance I was not a member of.
- Logged into an instance I am a member of.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7169
Differential Revision: https://secure.phabricator.com/D11696
Summary: Fixes T7118. This does the basic "filter the list" thing, though it ends up being a little manual since I guess this hasn't come up before? There is also potential weird behavior if the user was using an app and lost access to it - they will have nothing selected on edit - but I think this is actually correct behavior in this circumstance.
Test Plan:
used a user who couldn't get access to the "quick create" apps and noted that the dropdown list on dashboard panel create was missing the expected engines
ran `arc unit --everything` to verify abstract method implemented everywhere
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7118
Differential Revision: https://secure.phabricator.com/D11687
Summary: Fixes T7164. Adds some details about how the statuses will show up in the UI.
Test Plan: Read the text
Reviewers: epriestley, chad
Reviewed By: chad
Subscribers: Korvin, epriestley
Maniphest Tasks: T7164
Differential Revision: https://secure.phabricator.com/D11686
Summary: Fixes T7117. The slightly icky part is we just build the menu items up 2x because there's no way to tell you wont be able to make a menu item unless you try to make them all and come up with nada.
Test Plan: created a user and denied them access to every application in the quick create menu. observed the "+" icon disappearing from the nav, correctly. used a different, unrestricted user and the menu showed up and worked
Reviewers: epriestley, chad
Reviewed By: chad
Subscribers: Korvin, epriestley
Maniphest Tasks: T7117
Differential Revision: https://secure.phabricator.com/D11684
Summary: So I derped and missed the %s inside the `UPDATE` query (previously only fixing the `INSERT` query). This changes `%s` to `%B` for the update logic as well.
Test Plan: Patched it in production and saw the offending build run all the way through without UTF8-related exceptions.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11669
Summary:
This allows us to CDN the cluster.
General problem is that we can't easily give each instance its own CDN URI (`giraffe.phcdn.net`) in Cloudfront, because it requires that you enumerate all aliases (and there's a limit of 100) and depends on SNI (a newish feature of SSL which allows one server to serve multiple certificates, but which doesn't have full support everywhere yet).
It's //possible// that we could eventually work around this, or use Cloudflare instead (which has a different model that seems like a slightly easier fit for CDN-domain-per-instance), but I don't want to sink a ton of work into this and want to keep things on AWS insofar as we reasonably can.
The easiest way to fix this is just to put the instance identity into URIs, then read it out when handling CDN requests. This has no effect on installs without cluster instance configuration, which is all of them except ours.
It's also slightly desirable to share this stuff, since we get to share the cache for static resources, which are always identical across instances.
So requests go from the Cloudfront gateway ("xyz.cloudfront.com") to the LB with a hard-coded instance name ("cdn.phacility.com"), which gets them routed to a balanced web machine. The web machine picks the correct instance name out of the URI, acts as that instance, and does the correct thing.
The messiest part of this is that we need "cdn.phacility.com" to be a real instance so it can serve static resources, but that's not a big deal. We have a few other hard-codes which have to be real resources for now, like we must have a merchant named "Phacility".
Test Plan:
- Viewed files with `security.alternate-file-domain` off (i.e., no file tokens).
- Viewed pages and files with `security.alternate-file-domain` on. Saw correct resource behavior, @isntance generation of URIs, and correct token redirect behavior for files.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11668
Summary: Fixes T7094 (last of many revisions). Its important to do this filtering ASAP so that users can't deduce the identify of an unknown / invisible project.
Test Plan: executed a query for tasks in project foo using user bar. using user foo, lock user bar out of project foo. reissued the query and saw "no data" as well as "restricted project" in the project typeahead.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7094
Differential Revision: https://secure.phabricator.com/D11660
