Summary: ...way way down in PhabricatorController. Use it on ManiphestTaskDetailController to test it. Ref T4712. I think the pager logic to be added as part of T4712 can safely reside entirely within this method. As I said earlier, 5 parameters is a lot, so I don't really want to add more. Next diff would do the pagination logic and the diff after that would deploy it everywhere. If while deploying it everywhere I find something off, that will be a different diff.
Test Plan: viewed maniphest tasks and they looked as spiffy as ever.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T4712
Differential Revision: https://secure.phabricator.com/D10844
Summary:
Ref T5702. This is a forward-looking change which provides some very broad API improvements but does not implement them. In particular:
- Controllers no longer require `$request` to construct. This is mostly for T5702, directly, but simplifies things in general. Instead, we call `setRequest()` before using a controller. Only a small number of sites activate controllers, so this is less code overall, and more consistent with most constructors not having any parameters or effects.
- `$request` now offers `getURIData($key, ...)`. This is an alternate way of accessing `$data` which is currently only available on `willProcessRequest(array $data)`. Almost all controllers which implement this method do so in order to read one or two things out of the URI data. Instead, let them just read this data directly when processing the request.
- Introduce `handleRequest(AphrontRequest $request)` and deprecate (very softly) `processRequest()`. The majority of `processRequest()` calls begin `$request = $this->getRequest()`, which is avoided with the more practical signature.
- Provide `getViewer()` on `$request`, and a convenience `getViewer()` on `$controller`. This fixes `$viewer = $request->getUser();` into `$viewer = $request->getViewer();`, and converts the `$request + $viewer` two-liner into a single `$this->getViewer()`.
Test Plan:
- Browsed around in general.
- Hit special controllers (redirect, 404).
- Hit AuditList controller (uses new style).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5702
Differential Revision: https://secure.phabricator.com/D10698
Summary:
Ref T2787. Currently, we kill a cart and dead-end the workflow on a charge failure.
Instead, fail the charge and reset the cart so the user can try using a valid payment instrument like a normal checkout workflow would.
Some shakiness/smoothing on WePay for the moment; PayPal is still made up since we don't have a "Hold" state yet.
Test Plan: {F215214}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10666
Summary:
Fixes T6084. Changes:
- Rename `phabricator.show-beta-applications` to `phabricator.show-prototypes`, to reinforce that these include early-development applications.
- Migrate the config setting.
- Add an explicit "no support" banner to the config page.
- Rename "Beta" to "Prototype" in the UI.
- Use "bomb" icon instead of "half star" icon.
- Document prototype applications in more detail.
- Explicitly document that we do not support these applications.
Test Plan:
- Ran migration.
- Resolved "obsolete config" issue.
- Viewed config setting.
- Browsed prototypes in Applications app.
- Viewed documentation.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley, hach-que
Maniphest Tasks: T6084
Differential Revision: https://secure.phabricator.com/D10493
Summary: Fixes T6052. Allow installs to link to legal documents, etc., in the page footer.
Test Plan:
- Configured a footer.
- Viewed workboards (no footer).
- Viewed Conpherence (no apparent disruption, I think everything z-indexes over the footer).
- Viewed stuff on mobile (seems OK).
- Viewed login page (saw footer).
{F201718}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T6052
Differential Revision: https://secure.phabricator.com/D10466
Summary:
Resolves T5937. HTTPS redirects caused by `security.require-https` use a full scheme, domain and port in the URI. Consequently, this causes invocation of the new external redirect logic and prevents redirection from occurring properly when accessing the HTTP version of Phabricator that has `security.require-https` turned on.
I've also fixed the automatic slash redirection logic to add the external flag where appropriate.
Test Plan: Configured SSL on my local machine and turned on `security.require-https`. Observed the "Refusing to redirect" exception on master, while the redirect completed successfully with this patch.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5937
Differential Revision: https://secure.phabricator.com/D10318
Summary: Provide an implementation for the `getName` method rather than automagically determining the application name.
Test Plan: Saw reasonable application names in the launcher.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10027
Summary: Ref T5655. Some discussion in D9839. Generally speaking, `Phabricator{$name}Application` is clearer than `PhabricatorApplication{$name}`.
Test Plan:
# Pinned and uninstalled some applications.
# Applied patch and performed migrations.
# Verified that the pinned applications were still pinned and that the uninstalled applications were still uninstalled.
# Performed a sanity check on the database contents.
Reviewers: btrahan, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: hach-que, epriestley, Korvin
Maniphest Tasks: T5655
Differential Revision: https://secure.phabricator.com/D9982
Summary: I'm pretty sure that `@group` annotations are useless now... see D9855. Also fixed various other minor issues.
Test Plan: Eye-ball it.
Reviewers: #blessed_reviewers, epriestley, chad
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9859
Summary: Fixes T5541. Standalone dialog pages, including the high-security auth page, should all work fine on mobile.
Test Plan: {F173598}
Reviewers: chad, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T5541
Differential Revision: https://secure.phabricator.com/D9799
Summary:
Ref T5446.
- For all callsites which do not specify a value, set `false` explicitly.
- Make `true` the default.
Test Plan: Used `grep`, then manually went through everything.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5446
Differential Revision: https://secure.phabricator.com/D9687
Summary: Ran `arc lint --apply-patches --everything` over rP, mainly to change double quotes to single quotes where appropriate. These changes also validate that the `ArcanistXHPASTLinter::LINT_DOUBLE_QUOTE` rule is working as expected.
Test Plan: Eyeballed it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9431
Summary: Ref T5089. Adds a `security.require-multi-factor-auth` which forces all users to enroll in MFA before they can use their accounts.
Test Plan:
Config:
{F159750}
Roadblock:
{F159748}
After configuration:
{F159749}
- Required MFA, got roadblocked, added MFA, got unblocked.
- Removed MFA, got blocked again.
- Used `bin/auth strip` to strip MFA, got blocked.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5089
Differential Revision: https://secure.phabricator.com/D9285
Summary:
This does some backend cleanup of the tile stuff, and some general cleanup of other application things:
- Users who haven't customized preferences get a small, specific set of pinned applications: Differential, Maniphest, Diffusion, Audit, Phriction, Projects (and, for administrators, Auth, Config and People).
- Old tile size methods are replaced with `isPinnnedByDefault()`.
- Shortened some short descriptions.
- `shouldAppearInLaunchView()` replaced by less ambiguous `isLaunchable()`.
- Added a marker for third-party / extension applications.
Test Plan: Faked away my preferences and viewed the home page, saw a smaller set of default pins.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9358
Summary:
Merge "Organization" and "Communication" into "Core". The split between these three was always tenuous, and this is easier to use and nicer looking on the new launcher.
Merge "Miscellaneous" into "Utilities" since they're basically the same thing.
Test Plan: Looked at app launcher.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9334
Summary:
This probably needs some tweaks, but the idea is to make it easier to browse and access applications without necessarily needing them to be on the homepage.
Open to feedback.
Test Plan:
(This screenshot merges "Organization", "Communication" and "Core" into a single "Core" group. We can't actually do this yet because it wrecks the homepage.)
{F160052}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5176
Differential Revision: https://secure.phabricator.com/D9297
Summary: The removes the sprite sheet 'icons' and replaces it with FontAwesome fonts.
Test Plan:
- Grep for SPRITE_ICONS and replace
- Grep for sprite-icons and replace
- Grep for PhabricatorActionList and choose all new icons
- Grep for Crumbs and fix icons
- Test/Replace PHUIList Icon support
- Test/Replace ObjectList Icon support (foot, epoch, etc)
- Browse as many pages as I could get to
- Remove sprite-icons and move remarkup to own sheet
- Review this diff in Differential
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9052
Summary:
Ref T4398. This prompts users for multi-factor auth on login.
Roughly, this introduces the idea of "partial" sessions, which we haven't finished constructing yet. In practice, this means the session has made it through primary auth but not through multi-factor auth. Add a workflow for bringing a partial session up to a full one.
Test Plan:
- Used Conduit.
- Logged in as multi-factor user.
- Logged in as no-factor user.
- Tried to do non-login-things with a partial session.
- Reviewed account activity logs.
{F149295}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8922
Summary: Ref T4843. This is a purely-visual link; label it with the application name.
Test Plan: {F149583}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T4843
Differential Revision: https://secure.phabricator.com/D8927
Summary:
- Dialog pages currently have no titles or crumbs, and look shoddy. Add titles and crumbs.
- Dialog titles aren't always great for crumbs, add an optional "short title" for crumbs.
- `AphrontDialogResponse` is pure boilerplate. Allow controllers to just return a `DialogView` instead and get the same effect.
- Building dialogs requires a bit of boilerplate, and we generally construct them with no explicit `"action"`, which has some issues with T4593. Provide a convenience method to set the viewer and get a reasonable, explict submit URI.
Test Plan:
- Viewed dialog on its own.
- Viewed dialog as a dialog.
{F132353}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8577
Summary:
Fixes T4619. Currently, even if a viewer can't see Maniphest, they'll still see empty panels on the home page. These panels will always be empty so there's no real policy violation, but it's confusing.
Longer term, dashboards should fix this.
Test Plan: Viewed home page with a user with and without permissions on the apps.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4619
Differential Revision: https://secure.phabricator.com/D8545
Summary:
Ref T4593. There are a variety of clever attacks against OAuth which involve changing the redirect URI to some other URI on the same domain which exhibits unexpected behavior in response to an OAuth request. The best approach to dealing with this is for providers to lock to a specific path and refuse to redirect elsewhere, but not all providers do this.
We haven't had any specific issues related to this, but the anchor issue in T4593 was only a step away.
To mitigate this in general, we can reject the OAuth2 `'code'` parameter on //every// page by default, and then whitelist it on the tiny number of controllers which should be able to receive it.
This is very coarse, kind of overkill, and has some fallout (we can't use `'code'` as a normal parameter in the application), but I think it's relatively well-contained and seems reasonable. A better approach might be to whitelist parameters on every controller (i.e., have each controller specify the parameters it can receive), but that would be a ton of work and probably cause a lot of false positives for a long time.
Since we don't use `'code'` normally anywhere (as far as I can tell), the coarseness of this approach seems reasonable.
Test Plan:
- Logged in with OAuth.
- Hit any other page with `?code=...` in the URL, got an exception.
- Grepped for `'code'` and `"code"`, and examined each use to see if it was impacted.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: aran, epriestley
Maniphest Tasks: T4593
Differential Revision: https://secure.phabricator.com/D8499
Summary:
There are quite a few tests in Arcanist, libphutil and Phabricator that do something similar to `$this->assertEqual(false, ...)` or `$this->assertEqual(true, ...)`.
This is unnecessarily verbose and it would be cleaner if we had `assertFalse` and `assertTrue` methods.
Test Plan: I contemplated adding a unit test for the `getCallerInfo` method but wasn't sure if it was required / where it should live.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8460
Summary:
Unwinds the mess I made in D8422 / D8430:
- Remove `'fonts'`, since individual fonts can be included via Celerity now.
- Include Source Sans from the local source when a document uses it as a fontkit.
Test Plan: Browsed Diviner, saw Source Sans.
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D8431
Summary:
- Allow Celerity to map and serve WOFF files.
- Add Source Sans Pro, Source Sans Pro Bold, and the corresponding LICENSE.
- Add a `font-source-sans-pro` resource for the font.
Test Plan:
- Changed body `font-face` to `'Source Sans Pro'`.
- Added `require_celerity_resource('font-source-sans-pro')` in StandardPageView.
Works in Firefox/Chrome/Safari, at least:
{F123296}
{F123297}
{F123298}
Reviewers: btrahan, chad
Reviewed By: chad
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D8430
Summary: Ref T3623. These are obsoleted by the global quick-create menu, so we can simplify the app launcher.
Test Plan: Looked at app launcher, grepped for everything.
Reviewers: chad
Reviewed By: chad
CC: chad, aran
Maniphest Tasks: T3623
Differential Revision: https://secure.phabricator.com/D8104
Summary:
Ref T3623. I'm sure I didn't get the margins / drop shadow quite right, but this looks and works reasonably well:
{F105637}
Test Plan: Clicked stuff to quick create.
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran
Maniphest Tasks: T3623
Differential Revision: https://secure.phabricator.com/D8089
Summary:
Ref T3623. This is like a pre-v0, in that it doesn't have a dropdown yet.
Clicking the button takes you to a page which can serve as a right click / mobile / edit target in the long run, but is obviously not great for desktop use. I'll add the dropdown in the next iteration.
Test Plan: {F105631}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T3623
Differential Revision: https://secure.phabricator.com/D8088
Summary:
Ref T2380. If an install has a CDN domain configured, but does not list it as an alternate domain (which is standard/correct, but not incredibly common, see T2380), we'll currently try to set anonymous cookies on it. These will correctly fail security rules.
Instead, don't try to set these cookies.
I missed this in testing yesterday because I have a file domain, but I also have it configured as an alternate domain, which allows cookies to be set. Generally, domain management is due for some refactoring.
Test Plan: Set file domain but not as an alternate, logged out, nuked file domain cookies, reloaded page. No error after patch.
Reviewers: btrahan, csilvers
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2380
Differential Revision: https://secure.phabricator.com/D8057
Summary:
Fixes T3793. There's a lot of history here, see D4012, T2102. Basically, the problem is that things used to work like this:
- User is logged out and accesses `/xyz/`. After they login, we'd like to send them back to `/xyz/`, so we set a `next_uri` cookie.
- User's browser has a bunch of extensions and now makes a ton of requests for stuff that doesn't exist, like `humans.txt` and `apple-touch-icon.png`. We can't distinguish between these requests and normal requests in a general way, so we write `next_uri` cookies, overwriting the user's intent (`/xyz/`).
To fix this, we made the 404 page not set `next_uri`, in D4012. So if the browser requests `humans.txt`, we 404 with no cookie, and the `/xyz/` cookie is preserved. However, this is bad because an attacker can determine if objects exist and applications are installed, by visiting, e.g., `/T123` and seeing if they get a 404 page (resource really does not exist) or a login page (resource exists). We'd rather not leak this information.
The comment in the body text describes this in more detail.
This diff sort of tries to do the right thing most of the time: we write the cookie only if we haven't written it in the last 2 minutes. Generally, this should mean that the original request to `/xyz/` writes it, all the `humans.txt` requests don't write it, and things work like users expect. This may occasionally do the wrong thing, but it should be very rare, and we stop leaking information about applications and objects.
Test Plan: Logged out, clicked around / logged in, used Charles to verify that cookies were set in the expected way.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3793
Differential Revision: https://secure.phabricator.com/D8047
Summary: Fixes T4339. If you're anonymous, we use a digest of your session key to generate a CSRF token. Otherwise, everything works normally.
Test Plan: Logged out, logged in, tweaked CSRF in forms -- I'll add some inlines.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4339
Differential Revision: https://secure.phabricator.com/D8046
Summary:
Ref T4339. Ref T4310. Currently, sessions look like `"afad85d675fda87a4fadd54"`, and are only issued for logged-in users. To support logged-out CSRF and (eventually) external user sessions, I made two small changes:
- First, sessions now have a "kind", which is indicated by a prefix, like `"A/ab987asdcas7dca"`. This mostly allows us to issue session queries more efficiently: we don't have to issue a query at all for anonymous sessions, and can join the correct table for user and external sessions and save a query. Generally, this gives us more debugging information and more opportunity to recover from issues in a user-friendly way, as with the "invalid session" error in this diff.
- Secondly, if you load a page and don't have a session, we give you an anonymous session. This is just a secret with no special significance.
This does not implement CSRF yet, but gives us a client secret we can use to implement it.
Test Plan:
- Logged in.
- Logged out.
- Browsed around.
- Logged in again.
- Went through link/register.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T4339
Differential Revision: https://secure.phabricator.com/D8043
Summary: Ref T4339. We have more magical cookie names than we should, move them all to a central location.
Test Plan: Registered, logged in, linked account, logged out. See inlines.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4339
Differential Revision: https://secure.phabricator.com/D8041
Summary: Ref T4310. Ref T3720. We use bare strings to refer to session types in several places right now; use constants instead.
Test Plan: grep; logged out; logged in; ran Conduit commands.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T3720
Differential Revision: https://secure.phabricator.com/D7963
Summary: Ref T4310. Ref T3720. Session operations are currently part of PhabricatorUser. This is more tightly coupled than needbe, and makes it difficult to establish login sessions for non-users. Move all the session management code to a `SessionEngine`.
Test Plan:
- Viewed sessions.
- Regenerated Conduit certificate.
- Verified Conduit sessions were destroyed.
- Logged out.
- Logged in.
- Ran conduit commands.
- Viewed sessions again.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T3720
Differential Revision: https://secure.phabricator.com/D7962
Summary: Ref T4310. Ref T3720. Partly, this makes it easier for users to understand login sessions. Partly, it makes it easier for me to make changes to login sessions for T4310 / T3720 without messing anything up.
Test Plan: {F101512}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3720, T4310
Differential Revision: https://secure.phabricator.com/D7954
Summary:
Ref T4222. Currently, CelerityResourceResponse holds response resources in flat maps. Instead, specify which map resources appear in.
Also, provide `requireResource()` and `initBehavior()` APIs on the Controller and View base classes. These provide a cleaner abstraction over `require_celerity_resource()` and `Javelin::initBehavior()`, but are otherwise the same. Move a few callsites over.
Test Plan:
- Reloaded pages.
- Browsed around Differential.
Reviewers: btrahan, hach-que
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7876
Summary:
- If you're an administrator and there are users waiting for approval, show a count on the home page.
- Sort out the `isUserActivated()` access check.
- Hide all the menu widgets except "Logout" for disabled and unapproved users.
- Add a "Log In" item.
- Add a bunch of unit tests.
Test Plan: Ran unit tests, clicked around as unapproved/approved/logged-in/logged-out users.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, chad
Differential Revision: https://secure.phabricator.com/D7574
Summary:
Nothing fancy here, just:
- UI to show users needing approval.
- "Approve" and "Disable" actions.
- Send "Approved" email on approve.
- "Approve" edit + log operations.
- "Wait for Approval" state for users who need approval.
There's still no natural way for users to end up not-approved -- you have to write directly to the database.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7573
Summary:
Small step forward which improves existing stuff or lays groudwork for future stuff:
- Currently, to check for email verification, we have to single-query the email address on every page. Instead, denoramlize it into the user object.
- Migrate all the existing users.
- When the user verifies an email, mark them as `isEmailVerified` if the email is their primary email.
- Just make the checks look at the `isEmailVerified` field.
- Add a new check, `isUserActivated()`, to cover email-verified plus disabled. Currently, a non-verified-but-not-disabled user could theoretically use Conduit over SSH, if anyone deployed it. Tighten that up.
- Add an `isApproved` flag, which is always true for now. In a future diff, I want to add a default-on admin approval queue for new accounts, to prevent configuration mistakes. The way it will work is:
- When the queue is enabled, registering users are created with `isApproved = false`.
- Admins are sent an email, "[Phabricator] New User Approval (alincoln)", telling them that a new user is waiting for approval.
- They go to the web UI and approve the user.
- Manually-created accounts are auto-approved.
- The email will have instructions for disabling the queue.
I think this queue will be helpful for new installs and give them peace of mind, and when you go to disable it we have a better opportunity to warn you about exactly what that means.
Generally, I want to improve the default safety of registration, since if you just blindly coast through the path of least resistance right now your install ends up pretty open, and realistically few installs are on VPNs.
Test Plan:
- Ran migration, verified `isEmailVerified` populated correctly.
- Created a new user, checked DB for verified (not verified).
- Verified, checked DB (now verified).
- Used Conduit, People, Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7572
Summary: Ref T4064. The response code here isn't normally relevant, but we can hit these via `git clone http://../`, etc., and it's clearly more correct to use HTTP 500.
Test Plan: Added a fake `throw new Exception()` and verified I got an HTTP 500 response.
Reviewers: jamesr, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4064
Differential Revision: https://secure.phabricator.com/D7507
Summary:
Mostly ripped from D7391, with some changes:
- Serve repositories at `/diffusion/X/`, with no special `/git/` or `/serve/` URI component.
- This requires a little bit of magic, but I got the magic working for Git, Mercurial and SVN, and it seems reasonable.
- I think having one URI for everything will make it easier for users to understand.
- One downside is that git will clone into `X` by default, but I think that's not a big deal, and we can work around that in the future easily enough.
- Accept HTTP requests for Git, SVN and Mercurial repositories.
- Auth logic is a little different in order to be more consistent with how other things work.
- Instead of AphrontBasicAuthResponse, added "VCSResponse". Mercurial can print strings we send it on the CLI if we're careful, so support that. I did a fair amount of digging and didn't have any luck with git or svn.
- Commands we don't know about are assumed to require "Push" capability by default.
No actual VCS data going over the wire yet.
Test Plan:
Ran a bunch of stuff like this:
$ hg clone http://local.aphront.com:8080/diffusion/P/
abort: HTTP Error 403: This repository is not available over HTTP.
...and got pretty reasonable-seeming errors in all cases. All this can do is produce errors for now.
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7417
Summary: See IRC. Someone got a `null` in CCPHIDs somehow. Moving to subscriptions should prevent this, but paper over it for now.
Test Plan: Will have @dctrwatson check.
Reviewers: btrahan, dctrwatson
Reviewed By: btrahan
CC: dctrwatson, aran
Differential Revision: https://secure.phabricator.com/D7330
Summary:
Ref T603. Fixes T2823. This updates Paste and Macro.
- **Paste**
- Added default view policy.
- I didn't add a "create" policy, since I can't come up with any realistic scenario where you'd give users access to pastes but not let them create them.
- **Macro**
- Added a "manage" policy, which covers creating and editing macros. This lets an install only allow "People With An Approved Sense of Humor" or whatever to create macros.
- Removed the "edit" policy, since giving individual users access to specific macros doesn't make much sense to me.
- Changed the view policy to the "most public" policy the install allows.
- Added view policy information to the header.
Also fix a couple of minor things in Maniphest.
Test Plan:
- Set Paste policy, created pastes via web and Conduit, saw they got the right default policies.
- Set Macro policy, tried to create/edit macros with valid and unauthorized users.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2823, T603
Differential Revision: https://secure.phabricator.com/D7317
Summary: Ref T603. When the user encounters an action which is controlled by a special policy rule in the application, make it easier for applications to show the user what policy controls the action and what the setting is. I took this about halfway before and left a TODO, but turn it into something more useful.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: chad
CC: chad, aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7265
Summary: Ref T603. Use the new hotness.
Test Plan: Edited Herald in Applications, tried to create rules / global rules without capabilities, got reasonable error messages.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7263
Summary:
Ref T603. Herald is a bit of a policy minefield right now, although I think pretty much everything has straightforward solutions. This change:
- Introduces "create" and "create global" permisions for Herald.
- Maybe "create" is sort of redundant since there's no reason to have access to the application if not creating rules, but I think this won't be the case for most applications, so having an explicit "create" permission is more consistent.
- Add some application policy helper functions.
- Improve rendering a bit -- I think we probably need to build some `PolicyType` class, similar to `PHIDType`, to really get this right.
- Don't let users who can't use application X create Herald rules for application X.
- Remove Maniphest/Pholio rules when those applications are not installed.
Test Plan:
- Restricted access to Maniphest and uninstalled Pholio.
- Verified Pholio rules no longer appear for anyone.
- Verified Maniphest ruls no longer appear for restricted users.
- Verified users without CREATE_GLOBAL can not create global ruls.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7219
Summary:
Ref T603. I had to partially revert this earlier because it accidentally blocked access to Conduit and File data for installs without "policy.allow-public", since the applications are available to "all users" but some endpoints actually need to be available even when not logged in.
This readjusts the gating in the controller to properly apply application visibility restrictions, and then adds a giant pile of unit test coverage to make sure it sticks and all the weird cases are covered.
Test Plan:
- Added and executed unit tests.
- Executed most of the tests manually, by using logged in / admin / public / disabled users.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7211
Summary:
Ref T603. Enables:
- Application policies can be edited.
- Applications can define custom policies (this will be used for setting defaults, like "what is the default visibiltiy of new tasks", and meta-policies, like "who can create a task?").
Test Plan: Edited application policies. A future diff does more with custom policies.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7205
Summary:
Ref T603. Broadly, this allows you to implement a policy like "Only users in Engineering can use Differential."
This isn't complete, and there will be a long tail of special cases to deal with. Some examples:
- If you can't use Differential, should you still be able to attach/detach revisions from tasks?
- You currently will be able to.
- This actually seems pretty reasonable.
- But in other cases it might not be: the "send user a message" action should probably require access to Conpherence.
- If you can't use Differential, should you still be able to see feed stories about it?
- You currently will be able to, if you can see the revisions.
- This seems not-so-reasonable and we should probably lock it down.
- If you can't use Differential, can users CC you on revisions?
- Currently, they can, and you can't do anything about it.
- Probably they shouldn't be able to? This seems challenging to explain in the UI.
- If you can't use Differential, can you write a Herald rule against it?
- You currently will be able to.
- Seems like you obviously shouldn't be able to.
- I think this is a general issue right now (you can still write Differential herald rules even if you uninstall the application, I believe).
There are probably a few more things I haven't thought of. However, there are a finite number of these things and I suspect there aren't //too/ many more than this -- I can't come up with like 100 of them, and half of the ones above have easy fixes.
Despite the rough edges, I think this accomplishes 95% of what installs expect from it.
Test Plan: Restricted Differential and saw it vanish from the home page.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7203
Summary:
Fixes T3894. The "Log Out" icon has moved away from its rightmost position in the menubar.
In rP2e5ac12, I added a "Policy" application. This was the root cause.
The reordering logic (below) is slightly wrong. The `array_select_keys()` call is actually using the //strings// (like "Admnistration") to select the groups, not the correct constants (like "admin"). Use the constants instead and get the expected group ordering.
Test Plan: Loaded page, "Log Out" is in the rightmost position.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T3894
Differential Revision: https://secure.phabricator.com/D7177
Summary: Ref T603. Killing this class is cool because the classes that replace it are policy-aware. Tried to keep my wits about me as I did this and fixed a few random things along the way. (Ones I remember right now are pulling a query outside of a foreach loop in Releeph and fixing the text in UIExample to note that the ace of hearts if "a powerful" card and not the "most powerful" card (Q of spades gets that honor IMO))
Test Plan: tested the first few changes (execute, executeOne X handle, object) then got real mechanical / careful with the other changes.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran, FacebookPOC
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D6941
Summary: Depends on D6769, removes 'dust' and uses a similar color background.
Test Plan: Review colors in sandbox.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D6772
Summary:
Ref T1536.
- Move all the provider-specific help into contextual help in Auth.
- This provides help much more contextually, and we can just tell the user the right values to use to configure things.
- Rewrite account/registration help to reflect the newer state of the word.
- Also clean up a few other loose ends.
Test Plan: {F46937}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6247
Summary:
Ref T1536. This is extremely reachable and changes the login code to the new stuff.
Notes:
- I've hard-disabled password registration since I want installs to explicitly flip it on via config if they want it. New installs will get it by default in the future, but old installs shouldn't have their auth options change.
- Google doesn't let us change the redirect URI, so keep the old one working.
- We need to keep a bit of LDAP around for now for LDAP import.
- **Facebook:** This causes substantive changes in what login code is executed.
Test Plan:
- Logged in / logged out / registered, hit new flows.
- Logged in with google.
- Verified no password registration by default.
Reviewers: btrahan, chad
Reviewed By: chad
CC: wez, nh, aran, mbishopim3
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6222
Summary:
Ref T1536.
- When we render a dialog on a page by itself, put it on a dust background.
- Currently, we render "Logout" in two different places. Stop doing that.
- Make sure the surviving one has workflow so we get a modal ajax dialog if possible.
Test Plan: {F46731}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6226
Summary: Ref T1536. Error state is a bit gross but we need to sort that out in general.
Test Plan:
{F46549}
{F46550}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6208
Summary:
This prevents security by obscurity.
If I have read-only access to the database then I can pretend to be any logged-in user.
I've used `PhabricatorHash::digest()` (even though we don't need salt as the hashed string is random) to be compatible with user log.
Test Plan:
Applied patch.
Verified I'm still logged in.
Logged out.
Logged in.
$ arc tasks
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6080
Summary: Ref T3166. I moved the create logic into a static method in the editor class to keep things tidy.
Test Plan: created a conpherence from UI. purdy. tried errors and got UI to show "required". for conduit, created a thread with all the bells and whistles and it worked. verified i got proper exceptions with bum conduit calls
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, aran, Korvin
Maniphest Tasks: T3166
Differential Revision: https://secure.phabricator.com/D6083
Summary:
Fixes T3218.
- Currently, Paste pages don't clear notifications about the paste (notably, token notifications).
- Currently, Paste pages don't show tooltips on tokens.
- `buildApplicationPage()` stopped respecting `pageObjects` (which controls whether "this page has been updated" is shown). Restore that.
- Make `pageObjects` imply "clear notifications on this stuff".
Test Plan: Viewed a tokened Paste. Verified it cleared the notification and hovering over a token showed a tip.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T3218
Differential Revision: https://secure.phabricator.com/D5971
Summary:
Normalize the unit test environment by installing all applications.
The immediate issue this fixes is that `testDropUnknownSenderMail` depends on Maniphest being installed. Some possible fixes are:
# Don't rely on the Maniphest mail receiver for the test (e.g., write a stub/dummy/mock receiver).
# Explicitly make sure Maniphest is installed before running the test.
# Normalize the test environment to install all applications.
I don't like (1) much because it turns a pretty good 10 line test into a bunch of stub classes or mock junk. I'll do it if we have more uses after a few more diffs, but so far running these tests against real code hasn't created a dependency mess and we get more coverage.
I don't like (2) much because I think requiring tests to do this will do more harm than good. The number of issues we'll hypothetically uncover by exposing unrealized application interdependencies is probably very small or maybe zero, and they're probably all trivial. But tests with an undeclared but implicit dependency on an application (e.g., Differential tests depend on Differential) are common.
So here's (3), which I think is reasonable.
I also simplified some of this code a little bit, and moved the Application object cache one level down (this was sort of a bug -- installation status is variant across requests).
Test Plan: Added unit test.
Reviewers: wez, btrahan
Reviewed By: wez
CC: aran
Differential Revision: https://secure.phabricator.com/D5938
Summary:
Ref T1205. Continuation of D5915.
Currently, `PhabricatorMetaMTAReceivedMail` has //all// the logic for routing mail. In particular:
- New mail receivers in applications must edit it.
- Mail receivers don't drop out when applications are uninstalled.
Applications have some logic in subclasses of `PhabricatorMailReplyHandler`, but this class is a bit of a mess. It is also heavily based on the assumption that mail receivers are objects (like revisions), but this is not true in at least two cases today (creating new tasks with `bugs@`, creating a new Conpherence thread) and likely other cases in the future (e.g., revision-by-mail).
Move this logic into a new `PhabricatorMailReceiver` classtree. This is similar to `PhabricatorMailReplyHandler` but a bit cleaner and more general. I plan to heavily reduce the responsibilities of `PhabricatorMailReplyHandler` or possibly eliminate it entirely.
For now, the new classtree doesn't do much of interest. The only behavioral change this diff causes is that Phabricator will now reject mail to an application when that application is uninstalled.
I also moved all the `ReplyHandler` classes into `mail/` directories in their respective applications.
Test Plan: Unit tests, used receive test to route mail to various objects.
Reviewers: btrahan
Reviewed By: btrahan
CC: Afaque_Hussain, edward, aran
Maniphest Tasks: T1205
Differential Revision: https://secure.phabricator.com/D5922
Summary:
Also join concepts of installed and enabled applications.
Also respect uninstalled Maniphest where disabled Maniphest was checked.
Test Plan:
Visited T1, D1.
Uninstalled Maniphest then visited T1, D1.
Disabled Maniphest then visited T1.
Visited /config/edit/maniphest.enabled/.
Reviewers: epriestley, Afaque_Hussain, edward
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5602
Summary:
Currently, `isInstalled()` and `getAllInstalledApplications()` are inconsistent:
- `isInstalled()` returns true for beta apps, even if `phabricator.show-beta-applications` is false.
- `getAllInstalledApplications()` omits beta apps if `phabricator.show-beta-applications` is false.
Making the beta config control installs (not just homepage visibility) makes far more sense as we roll out more thorough application integrations.
Make `isInstalled()` respect beta, and clean up some callsites.
D5602 builds on this.
Test Plan: Installed/uninstalled beta apps, verified Conpherence menu/panel and other application integrations dropped out of the UI.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D5603
Summary:
So I don't have to copy/paste everything again.
Used them at places I could find with my limited `grep` skills.
Test Plan: Visited hovercards, revision and tasks. No crashes.
Reviewers: epriestley, btrahan, chad
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5592
Summary:
My browser was showing the url of phabricator as the title instead of the real
title. Fix it so the title set for the home page actually gets used.
Test Plan: load phabricator and see "Bacon Ice Cream for Breakfast" as the title
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, chad
Differential Revision: https://secure.phabricator.com/D5428
Summary: We currently inspect `phabricator.uninstalled-applications` in two places -- when building a list of `getAllInstalledApplications()` and when asking an application if it `isInstalled()`. This diff moves that all to the latter function, meaning we can override it in clever and subtle ways for applications that want to add extra defensiveness about whether they should be considered installed or not (e.g. Releeph, in D4932.)
Test Plan: Load the main Phabricator page, pick an application, uninstall it, notice it is absent, then install it and notice the launch icon reappear.
Reviewers: epriestley, Afaque_Hussain
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5326
Summary: Fixes T2698. When applications are installed, their Conduit calls should drop out. This will also let us land Releeph without exposing Conduit calls.
Test Plan:
- Viewed Conduit console; uninstalled some applications and verified their calls dropped out.
- Tried to make an uninstalled call; got an appropriate error.
Reviewers: edward, btrahan
Reviewed By: edward
CC: aran
Maniphest Tasks: T2698
Differential Revision: https://secure.phabricator.com/D5302
Summary: This adds an option dust background for certain application designs, like Macro and Pholio to help make the list views pop more.
Test Plan: Reviewed Macro and Pholio.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5209
Summary:
- Unify all the reference/embed Remarkup rules for Differential, Maniphest, Paste and Ponder.
- Add rules for Pholio.
- Does not yet unify Diffusion or Files (both are a bit more involved).
- Prepare for hovercards.
Test Plan: {F33894}
Reviewers: chad, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D5120
Summary: Crumbs, phts, and mobile layouts for Countdown.
Test Plan: Tested new, edit and delete timer. Verified timer works. Unable to get 'remove chrome' to work, will investigate.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5101
Summary: Sgrepped for `"=~/</"` and manually changed every HTML.
Test Plan: This doesn't work yet but it is hopefully one of the last diffs before Phabricator will be undoubtedly HTML safe.
Reviewers: epriestley
CC: aran, Korvin
Maniphest Tasks: T2432
Differential Revision: https://secure.phabricator.com/D4927
Summary:
I like this abstraction better.
Result of `phutil_implode_html()` may be also used as a param of `hsprintf()`.
Test Plan: None.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4904
Summary:
By default, order applications in application order. See discussion in D4708.
Principally, this is intended to make sure that application event handlers are registered in order, and thus fire in order.
Test Plan:
Looked at /applications/, homepage tiles, verified they both still work.
I didn't actually test the event handler bit since it's fairly complicated to test blind; D4708 should provide a test case.
Reviewers: btrahan, Afaque_Hussain
Reviewed By: Afaque_Hussain
CC: aran
Differential Revision: https://secure.phabricator.com/D4791
Summary: Disabled uninstalling of applications which can't be uninstalled. Also, applications which cannot be uninstalled always show that they are installed even if users somehow manually edit the configuration.
Test Plan: Manually edited the URI to uninstall applications which can't be unisntalled.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4741
Summary: Code Refactored as suggested by epriestley
Test Plan: Same test plan as of Installation & Uninstallation of Applications
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4740
Summary: Created Applications application which allows uninstallation & installation of application.
Test Plan: In "Applications" application, clicked on uninstalled the application by cliking Uninstall and chekcing whether they are really uninstalled(Disabling URI & in appearance in the side pane). Then Clicked on the install button of the uninstalled application to check whether they are installed.
Reviewers: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4715
Summary: Broken since birth.
Test Plan: Used it.
Reviewers: nh, epriestley
Reviewed By: nh
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4602
Summary: Just removed the link and created a new field under preferences. Now the setting is under Display Preferences.
Test Plan: Enablied/Disabled dark console to see if it works.
Reviewers: epriestley
Reviewed By: epriestley
CC: irinav, aran, Korvin
Maniphest Tasks: T2344
Differential Revision: https://secure.phabricator.com/D4549
Conflicts:
src/view/page/PhabricatorStandardPageView.php
Summary: Fixes T2357. In D4529, I recommended we just hide tiles for beta applications on installs without beta apps enabled. However, this creates at least a couple of issues, notably the stuff in T2357. The main app I was concerned wih Config, which we ended up un-beta'ing anyway, so I think this will probably solve more problems than it creates.
Test Plan: Verified routes for beta applications dropped out when beta was disabled. Verified "Customize Applications" no longer shows these applications.
Reviewers: ljalonen, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2357
Differential Revision: https://secure.phabricator.com/D4546
Summary:
See discussion in D4438. Allows users to customize application tiles, and implements generally reasonable defaults so they hopefully won't.
Sizes are "invisible" (internal only, used to hide admin apps from non-admins), "hidden" (hide by default, show after clicking "Show More Applications"), "show" (show a small square tile) and "full" (show a full-width tile with subtitle).
Test Plan:
Default view for a non-admin:
{F29375}
Adjusted settings, hidden:
{F29373}
Adjusted settings, shown:
{F29374}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4439
Summary: Move all navs to use the newer-style, darker, textured look. I'm //pretty// sure this doesn't break anything.
Test Plan: Looked at a bunch of apps.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4376
Summary: Currently, AphrontProxyResponse is expected to build a string. This prevents some response types (like Dialog) from being proxied, because they have special rules. Instead, make proxy responses reduce into a non-proxied response so it's possible to proxy any type of response and hit all the normal rules for it.
Test Plan: Built a proxied DialogResponse on top of this.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2104, T912
Differential Revision: https://secure.phabricator.com/D4159
Summary: D4153 made these render with newlines between items; use commas instead.
Test Plan: {F26950}
Reviewers: btrahan, chad, vrana
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4162
Summary:
Issues here:
- Need an application-sized "eye", or a "home" icon for "Phabricator Home".
- Some of the "apps_lb_2x" sliced images are the "_dark_" versions, not the light versions.
- If you slice an application-sized "logout" (power off) icon and application-sized "help" (questionmark in circle) icon I can replace the current menu icons and nearly get rid of "autosprite".
- To replace the icons on /applications/, the non-retina size is "4x", so we'd need "8x" for retina. Alternatively I can reduce the icon sizes by 50%.
- The "Help", "Settings" and "Logout" items currently have a "glowing" hover state, which needs a variant (or we can drop it).
- The /applications/ icons have a white hover state (or we can drop it).
- The 1x application (14x14) icons aren't used anywhere right now, should they be? Maybe in the feed in the future, etc?
- The "apps-2x" and "apps-large" sheets are the same image, but getting them to actually use the same file is a bit tricky, so I just left them separate for now.
Test Plan:
{F26698}
{F26699}
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1960
Differential Revision: https://secure.phabricator.com/D4108
Summary:
Add a basic breadcrumbs element, and implement it in Paste.
This needs some polish but is most of the way there.
Test Plan:
{F26443}
{F26444}
{F26445}
(This element is not visible on devices.)
Reviewers: chad
Reviewed By: chad
CC: aran, btrahan
Maniphest Tasks: T1960
Differential Revision: https://secure.phabricator.com/D4087
Summary:
Adds a right-hand-side application menu, based roughly on `frame_v3.png`.
This has the same icon as the left menu until we get real design in, but is functionally reasonable.
Test Plan: {F26170} {F26169}
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1960
Differential Revision: https://secure.phabricator.com/D4061
Summary:
Toss this completely as per discussion elsewhere. Basically it doesn't feel as useful as we imagined it would, and breadcrumbs from T1960 will replace the primary useful part (navigating up).
There's some more cleanup to do but I'll hit that in the next few diffs.
Closes T1828 as wontfix.
Test Plan: Viewed app + local, app-without-local interfaces. Saw no app menus.
Reviewers: chad
Reviewed By: chad
CC: aran, vrana
Maniphest Tasks: T1828, T1960
Differential Revision: https://secure.phabricator.com/D4033
Summary:
See T2102 and inline for discussion. This seems like the least-bad approach until we have something better.
The utility of next_uri seems much greater than the minor exposure of routable URIs.
Note that attackers can //not// detect if routable URIs are //valid// (e.g., "/D999" will always hit the login page whether it exists or not), just that they're routable. So you can only really tell if apps are installed or not.
Test Plan: Hit `/alsdknlkasnbla` while logged out, got 404 instead of login.
Reviewers: vrana, codeblock, btrahan
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2102
Differential Revision: https://secure.phabricator.com/D4012
Summary: was poking at T654 and noticed subscribers weren't exposed in search UI so I did so. Also make ponder a little less silly on the double handles load. Finally, stopped showing the "Examine Index" link to non admins since they can't click it. Note this introduces a UI oddity in that you Users and Phriction Documents don't currently have the subscribe functionality.
Test Plan: searched for subscribers in all applications - it worked!
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3907
Summary:
This commit doesn't change license of any file. It just makes the license implicit (inherited from LICENSE file in the root directory).
We are removing the headers for these reasons:
- It wastes space in editors, less code is visible in editor upon opening a file.
- It brings noise to diff of the first change of any file every year.
- It confuses Git file copy detection when creating small files.
- We don't have an explicit license header in other files (JS, CSS, images, documentation).
- Using license header in every file is not obligatory: http://www.apache.org/dev/apply-license.html#new.
This change is approved by Alma Chao (Lead Open Source and IP Counsel at Facebook).
Test Plan: Verified that the license survived only in LICENSE file and that it didn't modify externals.
Reviewers: epriestley, davidrecordon
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2035
Differential Revision: https://secure.phabricator.com/D3886
Summary: These haven't had any effect since the redesign, and we're moving to a more granular policy model so it probably doesn't make sense to ever restore them.
Test Plan: Grepped for "admin" and removed all relevant code.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3710
Summary: So they're maybe a little easier to deal with? I'm going to take this formally to "plz @chad plz help" land.
Test Plan: {F20329}
Reviewers: btrahan, vrana, chad
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3609
Summary: D3581 removed some flavor text. Allow applications to provide flavor text instead of status information if they so desire.
Test Plan: {F20325}
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran, chad
Differential Revision: https://secure.phabricator.com/D3608
Summary: A bunch of recently-created applications have help available; link to it.
Test Plan: Clicked each app, clicked help link in menu bar, ended up in relevant documentation.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3602
Summary:
- Introduce `shouldAllowPublic()`, indicating that logged-out users are OK in a controller if the install is configured to permit public policies.
- Make Paste views and lists allow public users.
- Make UI do sensible things with respect to disabling links, etc.
- Improve behavior of "you need to login" with respect to policy exceptions and Ajax requests.
Test Plan: Looked at "public" paste, saw all unavailable UI disabled, clicked it, got appropraite prompts.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3502
Summary: We want to allow a broader access to our installation but we need to check the request in that case.
Test Plan:
Created a simple `PhabricatorRequestChecker` returning a custom controller.
Verified that this controller is used when accessing any page.
Returned `null` from this checker and verified that all 209 Phabricator pages are accessible.
Reviewers: epriestley
Reviewed By: epriestley
CC: scottmac, aran, Korvin, btrahan
Differential Revision: https://secure.phabricator.com/D2488
Summary:
- Get rid of an AphrontSideNavView callsite.
- Modernize and simplify the application implementation.
- Doesn't work perfectly on tablet/phone but that's because not all the UI examples work there yet.
Test Plan: Looked at /applications/ and /uiexample/.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3431
Summary:
Without this, the https redirect doesn't work if you're not logged in, because
the login check in willBeginExecution happens before the redirect controller
can redirect. This also has the unpleasant effect of the login page on http
(when it should have redirected to https) not having any css or js.
Test Plan:
With the https redirect enabled, loaded phabricator without being logged in,
and saw that I got redirected to the https login page instead of seeing a
http login page.
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3438
Summary:
I've replaced all `id(new PhabricatorObjectHandleData(...))->loadHandles()` by `$this->loadViewerHandles(...)`.
Lint caught one usage in a static method.
Test Plan: Displayed revision with sporadic author.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3432
Summary:
This does a few things:
- Allows you to flag pastes. This is straightforward.
- Allows Applications to register event listeners.
- Makes object action lists emit a 'didrenderactions' event, so other applications can add more actions. The Flags application injects its action in this way. This should generally make it much easier to add actions to objects when we add new applications, with less code duplication and better modularity. We have a really hacky version of this in Differential that I want to get rid of in lieu of this more general approach. I'm going to make object lists do the same thing, so any application can jump in and add stuff.
Test Plan: Flagged and unflagged pastes. Viewed home page, differential, flags list.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3377
Summary:
I just put them in the property table instead of a list at the foot, they looked weird down there and were too bulky relative to their importance.
This won't scale great if someone forks a paste ten thousand times or whatever, but we can deal with that when we get there.
Also clean up a few things and tweak some styles,
Test Plan: Looked at forked, unforked pastes.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3295
Summary:
- Add a PhabricatorApplication.
- Make most of the views work well on tablets / phones. The actual "Create" form doesn't, but everything else is good -- need to make device-friendly form layouts before I can do the form.
Test Plan: Will attach screenshots.
Reviewers: btrahan, chad, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3293
Summary:
- Add getHelpURI() to PhabricatorApplication for application user guides.
- Add a new "help" icon menu item and skeletal Diviner application.
- Move help tabs to Applications where they exist, document the other ones that don't exist yet.
- Grep for all tab-related stuff and delete it.
Test Plan: Clicked "help" for some apps. Clicked around randomly in a bunch of other apps.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3267
Summary:
- Add an Application.
- Move routes to the application.
- Move nav out of tabs (which no longer exist).
- Fix a couple of random things.
Test Plan: Viewed sent/received mail logs. Performed send/receive tests. Viewed email details.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T631, T1569
Differential Revision: https://secure.phabricator.com/D3255
Summary:
There's currently no way to get here from the UI since nav tabs don't exist anymore. It's also always been hard to find this feature even when we had the tabs, since it's surprising that it's inside "MetaMTA".
- Move mailing lists to a separate application.
- Add `buildApplicationPage()`, since we don't really need `buildStandardPageResponse()` any more -- we can infer all the information from `PhabricatorApplication`. This will let us get rid of a lot of the `PhabricatorXXXController` classes which just define application information.
- Add `getApplicationURI()` to reduce code duplication, and in case we want to let you move applications around some day.
Test Plan: Looked/edited/saved mailing lists.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T631
Differential Revision: https://secure.phabricator.com/D3248
Summary:
Add a new left-side application menu. This menu shows which application you're in and provides a quick way to get to other applications.
On desktops, menus are always shown but the app menu can be collapsed to be very small.
On tablets, navigation buttons allow you to choose between the menus and the content.
On phones, navigation buttons allow you to choose between the app menu, the local menu, and the content.
This needs some code and UI cleanup, but has no effect yet so I think it's okay to land as-is, I'll clean it up a bit as I start integrating it. I want to play around with it a bit and see if it's good/useful or horrible anyway.
Test Plan: Will include screenshots.
Reviewers: vrana, btrahan, chad
Reviewed By: btrahan
CC: aran, alanh
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3223
Summary:
In D3144, I made us look in application maps to find routing rules. However, we don't process //all// the maps when we 404 and try to do a "/" redirect. Process all of the maps.
Additionally, in D3146 I made the menu items application-driven. However, some pages (like 404) don't have a controller. Drop the requirement that the controller be nonnull.
Test Plan:
- Visited "/maniphest", got a redirect after this patch.
- Visited "/asldknfalksfn", got a 404 after this patch.
Reviewers: davidreuss, vrana, btrahan
Reviewed By: davidreuss
CC: aran
Maniphest Tasks: T1607
Differential Revision: https://secure.phabricator.com/D3158
Summary:
This makes no changes, it just moves the menu icons to the applications instead of hard-coded on the page.
I'm going to try to address some of the angst in T1593 next...
Test Plan: Loaded logged-in / logged out pages. Clicked menu items. Looked at /applications/.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1593, T1569
Differential Revision: https://secure.phabricator.com/D3146
Summary:
- Adds a new "Applications" application.
- Builds an application list via application config instead of via hard-coding, so we can move toward better concepts of installing/uninstalling applications, etc.
- Applications indicate that they need attention with notice counts and brief status messages rathern than 50 giant tables of all sorts of app data.
I want to try replacing the home screen with this screen, pretty much. Not sure if this is totally crazy or not. What does everyone else think?
Test Plan: Will add screenshots.
Reviewers: btrahan, chad, vrana, alanh
Reviewed By: vrana
CC: aran, davidreuss, champo
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3129
Summary:
This needs a bunch of refinement but pretty much works. Currently shows only users and applications. Plans:
- Show actual search results too.
- Clean up the datasource endpoint so it's less of a mess.
- Make other typeaheads look more like this one.
- Improve sorting.
- Make object names hit the named objects as the first match.
Test Plan: Will attach screenshots.
Reviewers: btrahan, vrana, chad
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3110
Summary: For any count fact, allow a chart to be drawn. INCREDIBLY POWERFUL DATA ANALYSIS PLATFORM.
Test Plan: Drew a chart of object counts. Drew the Maniphest burn chart.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1562
Differential Revision: https://secure.phabricator.com/D3099
Summary:
- Add PhabricatorApplication. This is a general class that I have grand designs for, but used here to allow applications to provide objects for analysis by the facts appliction.
- Add FactCursors, to keep track of where iterators are.
- Make the daemon do something sort of useful.
- Add `bin/fact cursors` for showing and managing objects and cursors.
- Add some options to `bin/fact analyze`.
Test Plan:
- `bin/fact cursors`, `bin/fact cursors --reset DifferentialRevision`, `bin/fact cursors --reset X`
- `bin/fact analyze`, `bin/fact analyze --all`, `bin/fact analyze --iterator DifferentialRevision --skip-aggregates`
- `bin/phd debug fact`
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1562
Differential Revision: https://secure.phabricator.com/D3098
Summary:
Works this way:
- Select users' language with multiplexing.
- Select default language otherwise (it can be different from current user's language).
- Build body and subject for each user individually.
- Set the original language after sending the mails.
Test Plan:
- Comment on a diff of user with custom translation.
- Set default to a custom translation. Comment on a diff of user with default translation.
- Set default to a default translation. Comment on a diff of user with default translation.
Repeat with/without multiplexing.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1139
Differential Revision: https://secure.phabricator.com/D2774
Test Plan:
Altered database.
Wrote a custom translation and selected it in preferences.
Verified that the text is custom translated.
Set language back to default.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1139
Differential Revision: https://secure.phabricator.com/D2757
Summary:
- `kill_init.php` said "Moving 1000 files" - I hope that this is not some limit in `FileFinder`.
- [src/infrastructure/celerity] `git mv utils.php map.php; git mv api/utils.php api.php`
- Comment `phutil_libraries` in `.arcconfig` and run `arc liberate`.
NOTE: `arc diff` timed out so I'm pushing it without review.
Test Plan:
/D1234
Browsed around, especially in `applications/repository/worker/commitchangeparser` and `applications/` in general.
Auditors: epriestley
Maniphest Tasks: T1103
Summary:
Allow allowed email addresses to be restricted to certain domains. This implies email must be verified.
This probably isn't QUITE ready for prime-time without a few other tweaks (better administrative tools, notably) but we're nearly there.
Test Plan:
- With no restrictions:
- Registered with OAuth
- Created an account with accountadmin
- Added an email
- With restrictions:
- Tried to OAuth register with a restricted address, was prompted to provide a valid one.
- Tried to OAuth register with a valid address, worked fine.
- Tried to accountadmin a restricted address, got blocked.
- Tried to accountadmin a valid address, worked fine.
- Tried to add a restricted address, blocked.
- Tried to add a valid address, worked fine.
- Created a user with People with an invalid address, got blocked.
- Created a user with People with a valid address, worked fine.
Reviewers: btrahan, csilvers
Reviewed By: csilvers
CC: aran, joe, csilvers
Maniphest Tasks: T1184
Differential Revision: https://secure.phabricator.com/D2581
Summary:
Allow installs to require users to verify email addresses before they can use Phabricator. If a user logs in without a verified email address, they're given instructions to verify their address.
This isn't too useful on its own since we don't actually have arbitrary email registration, but the next step is to allow installs to restrict email to only some domains (e.g., @mycompany.com).
Test Plan:
- Verification
- Set verification requirement to `true`.
- Tried to use Phabricator with an unverified account, was told to verify.
- Tried to use Conduit, was given a verification error.
- Verified account, used Phabricator.
- Unverified account, reset password, verified implicit verification, used Phabricator.
- People Admin Interface
- Viewed as admin. Clicked "Administrate User".
- Viewed as non-admin
- Sanity Checks
- Used Conduit normally from web/CLI with a verified account.
- Logged in/out.
- Sent password reset email.
- Created a new user.
- Logged in with an unverified user but with the configuration set to off.
Reviewers: btrahan, vrana, jungejason
Reviewed By: btrahan
CC: aran, csilvers
Maniphest Tasks: T1184
Differential Revision: https://secure.phabricator.com/D2520
Summary:
- Unit tests can request storage fixtures.
- We build one fixture across all tests in the process, which can quickstart (takes roughly 1s to build, 200ms to destroy for me). This is a one-time cost for running an arbitrary number of fixture-based tests.
- We isolate all the connections inside transactions for each test, so individual tests don't affect one another.
Test Plan: Ran unit tests, which cover the important properties of fixtures.
Reviewers: btrahan, vrana, jungejason, edward
Reviewed By: btrahan
CC: aran, davidreuss
Maniphest Tasks: T140
Differential Revision: https://secure.phabricator.com/D2345
Summary:
- Currently, connections are responsible for connection caching. However, I want unit tests to be able to say "throw away the entire connection cache" with storage fixtures, and this is difficult/impossible when connections are responsible for the cache.
- The only behavioral change is that previously we would use the same connection for read-mode and write-mode queries. We'll now establish two connections. No installs actually differentiate between the modes so it isn't particularly relevant what we do here. In the long term, we should probably check the "w" cache before building a new "r" connection, so transactional code which involves reads and writes works (we don't have any such code right now).
Test Plan: Loaded pages, verified only one connection was established per database. Ran unit tests.
Reviewers: btrahan, vrana, jungejason, edward
Reviewed By: vrana
CC: aran
Maniphest Tasks: T140
Differential Revision: https://secure.phabricator.com/D2342
Summary: Allow the default namespace to be set in configuration, so you can juggle multiple copies of sandbox test data or whatever.
Test Plan: Changed default namespace, verified web UI and "storage" script respect it.
Reviewers: btrahan, vrana, jungejason
Reviewed By: vrana
CC: aran
Maniphest Tasks: T345
Differential Revision: https://secure.phabricator.com/D2341
Summary:
This addresses three issues with the current patch management system:
# Two people developing at the same time often pick the same SQL patch number, and then have to go rename it. The system catches this, but it's silly.
# Second/third-party developers can't use the same system to manage auxiliary storage they may want to add.
# There's no way to build mock databases for unit tests that need to do reads.
To resolve these things, you can now name your patches whatever you want and conflicts are just merge conflicts, which are less of a pain to fix than filename conflicts.
Dependencies are now a DAG, with implicit dependencies created on the prior patch if no dependencies are specified. Developers can add new concrete subclasses of `PhabricatorSQLPatchList` to add storage management, and define the dependency branchpoint of their patches so they apply in the correct order (although, generally, they should not depend on the mainline patches, presumably).
The commands `storage upgrade --namespace test1234` and `storage destroy --namespace test1234` will allow unit tests to build and destroy MySQL storage.
A "quickstart" mode allows an upgrade from scratch in ~1200ms. Destruction takes about 200ms. These seem like fairily reasonable costs to actually use in tests. Building from scratch patch-by-patch takes about 6000ms.
Test Plan:
- Created new databases from scratch with and without quickstart in a separate test namespace. Pointed the webapp at the test namespaces, browsed around, everything looked good.
- Compared quickstart and no-quickstart dump states, they're identical except for mysqldump timestamps and a few similar things.
- Upgraded a legacy database to the new storage format.
- Destroyed / dumped storage.
Reviewers: edward, vrana, btrahan, jungejason
Reviewed By: btrahan
CC: aran, nh
Maniphest Tasks: T140, T345
Differential Revision: https://secure.phabricator.com/D2323
Summary:
With invalid session (which happens for me when I change production and dev db but can of course happen in other cases), Phabricator displays an ugly unhandled exception dialog suggesting to logging in again.
But there's no login dialog on that page.
This also changes how users with invalid session are treated on pages not requiring logging.
Previously, an exception was thrown on them. Now they are treated as unlogged users.
Test Plan: Corrupt session, go to /, login.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D2236
Summary: This separates common MySQL stuff (identifiers and comments escaping, error codes, connection retries) from PHP extension specific stuff (connect, query, fetch, errors, escape string).
Test Plan:
/
Use `AphrontMySQLiDatabaseConnection` in `PhabricatorLiskDAO`, load homepage, edit task, save task.
Reviewers: epriestley
Reviewed By: epriestley
CC: nh, aran
Differential Revision: https://secure.phabricator.com/D2113
Summary:
We have a lot of cases where we store object relationships, but it's all kind of messy and custom. Some particular problems:
- We go to great lengths to enforce order stability in Differential revisions, but the implementation is complex and inelegant.
- Some relationships are stored on-object, so we can't pull the inverses easily. For example, Maniphest shows child tasks but not parent tasks.
- I want to add more of these and don't want to continue building custom stuff.
- UIs like the "attach stuff to other stuff" UI need custom branches for each object type.
- Stuff like "allow commits to close tasks" is notrivial because of nonstandard metadata storage.
Provide an association-like "edge" framework to fix these problems. This is nearly identical to associations, with a few differences:
- I put edge metadata in a separate table and don't load it by default, to keep edge rows small and allow large metadata if necessary. The on-edge metadata seemed to get abused a lot at Facebook.
- I put a 'seq' column on the edges to ensure they have an explicit, stable ordering within a source and type.
This isn't actually used anywhere yet, but my first target is attaching commits to tasks for T904.
Test Plan: Made a mock page that used Editor and Query. Verified adding and removing edges, overwriting edges, writing and loading edge data, sequence number generation.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, 20after4
Differential Revision: https://secure.phabricator.com/D2088
