Summary: Include task ID and class when raising this exception. I took a brief stab at doing this generically, but (a) we specifically raise this exception outside of normal try/catch because we can't follow normal recovery rules for it and (b) we don't have a reasonable PhutilProxyException or similar right now which would preserve stack traces, and don't have builtin exception nesting support until PHP 5.3.
Test Plan: Faked this exception, verified we get more information in the logs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2193
Differential Revision: https://secure.phabricator.com/D4205
Summary:
People hit three issues with D3914:
- As per T2059, we applied a schema change from a `.php` patch, which currently does not work if you use a different user to make schema changes than for normal use.
- Since the change in question is idempotent, just move it to a `.sql` patch. We'll follow up in T2059 and fix it properly.
- Rogue daemons at several installs used old code (expecting autoincrement) to insert into the new table (no autoincrement), thereby creating tasks with ID 0.
- Rename the table so they'll fail.
- This also makes the code a little more consistent.
- Some installs now have tasks with ID 0.
- Use checks against null rather than against 0 so we can process these tasks.
The major issues this fixes are the schema upgrade failure in T2059, and the infinite loops in T2072 and elsewhere.
This isn't really a fully statisfactory fix. I'll discuss some next steps in T2072.
Test Plan: Created new tasks via MetaMTA/Differential. Ran tasks with `phd debug taskmaster`. Inserted a task 0 and verified it ran and archived correctly.
Reviewers: btrahan, vrana, nh
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2072, T2059
Differential Revision: https://secure.phabricator.com/D3973
Summary: See D3912 for discussion. InnoDB may reuse autoincrement IDs after restart; provide a way to avoid it.
Test Plan: Unit tests. Scheduled and executed tasks through `drydock lease --type host` and `phd debug taskmaster`.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3914
Summary:
- Remove EC2, RemoteHost, Application, etc., blueprints for now. They're very proof-of-concept and Blueprints are getting API changes I don't want to bother propagating for now. Leave the abstract base class and the LocalHost blueprint. I'll restore the more complicated ones once better foundations are in place.
- Remove the Allocate controller from the web UI. The original vision here was that you'd manually allocate resources in some cases, but it no longer makes sense to do so as all allocations come from leases now. This simplifies allocations and makes the rule for when we can clean up resources clear-cut (if a resource has no more active leases, it can be cleaned up). Instead, we'll build resources like the localhost and remote hosts lazily, when leases come in for them.
- Add some configuration to manage the localhost blueprint.
- Refactor `canAllocateResources()` into `isEnabled()` (for config checks) and `canAllocateMoreResources()` (for quota checks, e.g. too many resources are allocated already).
- Juggle some signatures to align better with a world where blueprints generally do allocate.
- Add some more logging and error handling.
- Fix an issue with log ordering.
Test Plan: Allocated some localhost leases.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3902
Summary:
This commit doesn't change license of any file. It just makes the license implicit (inherited from LICENSE file in the root directory).
We are removing the headers for these reasons:
- It wastes space in editors, less code is visible in editor upon opening a file.
- It brings noise to diff of the first change of any file every year.
- It confuses Git file copy detection when creating small files.
- We don't have an explicit license header in other files (JS, CSS, images, documentation).
- Using license header in every file is not obligatory: http://www.apache.org/dev/apply-license.html#new.
This change is approved by Alma Chao (Lead Open Source and IP Counsel at Facebook).
Test Plan: Verified that the license survived only in LICENSE file and that it didn't modify externals.
Reviewers: epriestley, davidrecordon
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2035
Differential Revision: https://secure.phabricator.com/D3886
Summary:
We lock tasks by setting `leaseOwner` to a unique value, but the value is currently unique-to-the-process rather than unique-to-the-query. This means that if a process leases a task, then leases another task, both tasks will have the same `leaseOwner`. This can cause an issue where we go to select the task we just leased and get the other task instead, if we aren't careful about the select construction.
We can avoid this by being clever and making sure the select is constructed correctly, but making the `leaseOwner` unique to the query is much simpler and more foolproof. This guarantees we always select only the rows we just leased.
Also remove `PhabricatorGoodForNothingWorker` since `PhabricatorTestWorker` fills its role of allowing things to be tested, and simplify the unit tests since we don't need to be clever about avoiding this issue any more.
Test Plan: Ran unit tests.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3862
Summary:
This was the major goal of D3859/D3855, and to a lesser degree D3854/D3852.
As Drydock is allocating a resource, it may need to allocate other resources first. For example, if it's allocating a working copy, it may need to allocate a host first.
Currently, we have the process basically queue up the allocation (insert a task into the queue) and sleep() until it finishes. This is problematic for a bunch of reasons, but the major one is that if allocation takes more resources (host, port, machine, DNS) than you have daemons, they could all end up sleeping and waiting for some other daemon to do their work. This is really stupid. Even if you only take up some of them, you're spending slots sleeping when you could be doing useful work.
To partially get around this and make the CLI experience less dumb, there's this goofy `synchronous` flag that gets passed around everywhere and pushes the workflow through a pile of special cases. Basically the `synchronous` flag causes us to do everything in-process. But this is dumb too because we'd rather do things in parallel if we can, and we have to have a lot of special case code to make it work at all.
Get rid of all of this. Instead of sleep()ing, try to work on the tasks that need to be worked on. If another daemon grabbed them already that's fine, but in the worst case we just gracefully degrade and do everything in process. So we get the best of both worlds: if we have parallelizable tasks and free daemons, things will execute in parallel. If we have nonparallelizable tasks or no free daemons, things will execute in process.
Test Plan: Ran `drydock_control.php --trace` and saw it perform cascading allocations without sleeping or special casing.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3861
Summary:
- Clean up a TODO about permanent failures.
- Clean up a TODO about failing tasks after too many retries.
- Clean up a TODO about testing for bad leases.
- Make the lease/retry implementation more flexible and natural.
- Make completely bogus tasks fail permanently.
- Make PhabricatorMetaMTAWorker use new `getWaitBeforeRetry()` (as intended), not hackily implement logic in `getRequiredLeaseTime()`.
- Document worker hooks for failures and retries.
- Provide coverage on everything.
Test Plan: Ran unit tests. Ran `bin/phd debug taskmaster`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3859
Summary: This simplifies the fairly thorny logic of leasing tasks a bit. I'm planning to introduce another callsite shortly for Drydock.
Test Plan: Ran `bin/phd debug taskmaster`, observed sensible queries and correct operation.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3855
Summary: Make mobile-friendly and provide UI to cancel/retry tasks. Remove display of task data to arbitrary users, as it may be sensitive.
Test Plan:
{F22502}
{F22503}
{F22504}
{F22505}
{F22506}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3854
Summary:
Currently, when taskmasters complete a task it is immediately deleted. This prevents us from doing some general things, like:
- Supporting the idea of permanent failure (e.g., after N failures just stop trying).
- Showing the user how fast taskmasters are completing tasks.
- Showing the user how long tasks took to complete.
Having better visibility into this is important to Drydock, which builds on the task system. Also, generally buff debug output for task execution.
Test Plan: Ran `bin/phd debug taskmaster`. Ran `bin/phd debug garbage`. Queued some tasks via various systems.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3852
Summary: Provide array() default so we don't foreach() over null in the case of a missing config (from @dctrwatson).
Test Plan: Will verify with @dctrwatson.
Reviewers: vrana, btrahan, dctrwatson
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3686
Summary: Previously, the identification string was thrown at the server long before you were connected, I've moved this to the end of the motd raw, and now errthangz gud
Test Plan: Register an account for your bot to use, give your bot the correct nick and password, then watch
Reviewers: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D3410
Summary: In my haste, I forgot a trailing ?
Test Plan: Try both "Where is Derp?" and "Where in the world is Derp?"
Reviewers: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D3387
Summary: Added match to the novel statement: Where in the world is derp?
Test Plan: Say something like "Where in the world is CarmenSandiego?"
Reviewers: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D3318
Summary:
See D3126, T1667, T1658. Prior to D3126, `phd` did not use MySQL directly. Now that it does, there are at least two specific problems (see inline comment).
In the long term, we should probably break this dependency and use Conduit. However, we don't currently have access to the daemon log ID and getting it is a mess (the overseer generates it), and I think I want to rewrite how all this works at some point anyway (the daemon calls are currently completely unauthenticated, which is silly -- we should move them to an authenticated channel at some point, I think).
Test Plan: Ran `phd stop` with a bad MySQL config against a non-running daemon, didn't get a query error.
Reviewers: nh, vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1667, T1658
Differential Revision: https://secure.phabricator.com/D3314
Summary: The Log and PID directory should be separable in the config file
Test Plan: Start the daemons, and check if the pid and log files are stored in directories that were specified in the config file.
Reviewers: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3149
Summary:
To make it easier to monitor daemons, let's store their current state
(running, died, exited, or unknown) to the db. The purpose of this is to
provide more information on the daemon console about the status of daemons,
especially when they are running on multiple machines. This is mostly backend
work, with only a few frontend changes. (It is also dependent on a change
to libphutil.)
These changes will make dead or stuck daemons more obvious, and will allow
more work on the frontend to hide daemons (and logs) that have exited cleanly,
i.e. ones we don't care about any more.
Test Plan:
- run db migration, check in db that all daemons were marked as exited
- start up a daemon, check in db that it is marked as running
- open web interface, check that daemon is listed as running
- after daemon has been running for a little bit, check in db that dateModified
is being updated (indicating daemon is properly sending heartbeat)
- kill -9 daemon (but don't run bin/phd yet), and check that db still shows it
as running
- edit daemon db entry to show it as being on a different host, and backdate
dateModified field by 3 minutes, and check the web ui to show that the status
is unknown.
- change db entry to have proper host, check in web ui that daemon status is
displayed as dead. Check db to see that the status was saved.
- run bin/phd stop, and see that the formerly dead daemon is now exited.
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3126
Summary: You need to use -- to separate arguments for phd and the daemon.
Test Plan: Ran with the extra --.
Reviewers: epriestley, vrana
Reviewed By: vrana
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3106
'phd status' should have a stable result when invoked multiple times.
Automatically removing PID files for dead daemons every time 'phd status' is
invoked prevents tools from noticing that a daemon has died if something
happens to invoke 'phd status' before the tool looks. This affects Puppet
noticably, since it probably runs the status command every half hour.
'phd status' may be invoked by tools (such as puppet) which need to make
automated decisions about whether to start/restart the daemon. To enable this,
'phd status' now exits with 0 if all daemons are running, 1 if no daemons are
running, and 2 if some (but not all) daemons are running.
Summary: http://www.networksorcery.com/enp/protocol/irc.htm
Test Plan: augment code with an additional debug line (phlog('hi');) so I can see my case was trigged and it will fall through. setup an ill-configured IRC server with ngircd. Configure an ircbot to connect to said ill-configured IRC server. verify ircbot connected to channel. verify in irc bot logs that debug line was invoked.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1452
Differential Revision: https://secure.phabricator.com/D2962
Summary: Allow the GC daemon to collect the new markup cache.
Test Plan: Ran gc daemon in "debug" mode, saw it collect cache entries.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2947
Summary:
Support the `--verbose` flag added in D2795 in `phd`. See T1389.
Also simplify argument generation a little bit.
Test Plan: Ran "nice" daemon with debug, daemon + verbose, daemon + no verbose.
Reviewers: vrana, jungejason, edward, aurelijus
Reviewed By: aurelijus
CC: aran
Maniphest Tasks: T1389
Differential Revision: https://secure.phabricator.com/D2797
Summary: It requires `allow_url_fopen` which we don't check in setup and our installation is about to disable it.
Test Plan:
Login with OAuth.
/oauth/facebook/diagnose/
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2787
Summary: replace differential.find with differential.query and display in requested order
Test Plan: say D444D222D443D442 and ensure they are in the correct order
Reviewers: epriestley
Reviewed By: epriestley
CC: Mnkras, aran
Differential Revision: https://secure.phabricator.com/D2656
Summary:
- `kill_init.php` said "Moving 1000 files" - I hope that this is not some limit in `FileFinder`.
- [src/infrastructure/celerity] `git mv utils.php map.php; git mv api/utils.php api.php`
- Comment `phutil_libraries` in `.arcconfig` and run `arc liberate`.
NOTE: `arc diff` timed out so I'm pushing it without review.
Test Plan:
/D1234
Browsed around, especially in `applications/repository/worker/commitchangeparser` and `applications/` in general.
Auditors: epriestley
Maniphest Tasks: T1103
Summary: D2490 was not my finest hour and I incorrectly thought it was a null value from error. In reality this error is impossible and its just a valid empty array so instead use the empty predicate to bail.
Test Plan: with our logic combined, this be tested
Reviewers: vrana, epriestley
Reviewed By: epriestley
CC: aran, Koolvin
Differential Revision: https://secure.phabricator.com/D2503
Summary: 'cuz github issue 114 came into existence. instead, just return false early here. note i am not sure if I should phlog that this is happening or not but its not exception worthy IMO.
Test Plan: lint-only 'cuz i don't want to setup an IRC server locally / somehow get my local phabricator instance accessible out there. happy to test end to end if there's an easier way...!
Reviewers: vrana, epriestley
Reviewed By: vrana
CC: aran, Koolvin
Differential Revision: https://secure.phabricator.com/D2490
Summary:
- Merge CommitTask daemon into PullLocal daemon. This is another artifact of past instability (and order-dependent parsers). We still publish to the timeline, although this was the last consumer. Long term we'll probably delete timeline and move to webhooks, since everyone who has asked about this stuff has been eager to trade away the durability and ordering of the timeline for the ease of use of webhooks. There's also no reason to timeline this anymore since parsing is no longer order-dependent.
- Add `phd start` to start all the daemons you need. Add `phd restart` to restart all the daemons you need. So cool~
- Simplify and improve phd and Diffusion daemon documentation.
Test Plan:
- Ran `phd start`.
- Ran `phd restart`.
- Generated/read documentation.
- Imported some stuff, got clean parses.
Reviewers: btrahan, csilvers
Reviewed By: csilvers
CC: aran, jungejason, nh
Differential Revision: https://secure.phabricator.com/D2433
Summary: "Committed" is SVN-specific language, and confusing in Git and Mercurial. Use neutral language instead.
Test Plan: Inspection.
Reviewers: btrahan, Makinde, vrana, jungejason
Reviewed By: vrana
CC: aran
Maniphest Tasks: T909
Differential Revision: https://secure.phabricator.com/D2087
Summary: Last of the big final patches. Left a few debatable classes (12 out of about 400) that I'll deal with individually eventually.
Test Plan: Ran testEverythingImplemented.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T795
Differential Revision: https://secure.phabricator.com/D1881
Summary:
Adds a macro handler that spams your channel with macros. Config is:
- macro.size: scale macros to this size before rasterizing
- macro.sleep: sleep this many seconds between lines (evade flood protection)
Test Plan: derpderp
Reviewers: kdeggelman, btrahan
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1838
Summary:
This adds a new configuration setting:
"notification.actions" : [
"commit",
"abandon",
"actions"
]
if not set, displays all actions, if is set, display only what is set to display
Test Plan: add the notification.actions settings and set accordingly
Reviewers: epriestley, zeeg
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1820
Summary:
A user reported that their install (on an unusual piece of hardware) was hitting this timeout. We don't need to be quite so stingy; just use the default 30s timeout.
Also remove some kind of sentence fragment since I no longer remember what it meant and it doesn't make sense.
Test Plan: This change resolved the issue.
Reviewers: btrahan, jungejason
Reviewed By: jungejason
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1805
Summary: The docs say "http://www.domain.com/" but if you don't put "/api/" it fails. GOTCHA!
Test Plan: Removed "/api/", launched bot, it worked.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T935
Differential Revision: https://secure.phabricator.com/D1763
Summary: Added support for audit comment, concern, accept
Test Plan: Comment / Concern / Accept audit, and say "What's new?" in IRC
Reviewers: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1730
Summary:
Added phabot irc command to directly message a user rather than outputting in a
channel.
Syntax:
ex:
````Korvin, D1717```
results in phabot private messaging me the info on D1717
Test Plan: ##nick##, [DTPVF]n
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1717
Summary:
Added what's new flood protection and fixed array_push issues.
Also added rhetoric for "Commit"
Test Plan: say "What's new?" twice within one minute
Reviewers: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1684
Summary:
Added "What's new?" to the ircbot
====Matches
```What is new?
What's new?
Whats new```
Test Plan:
<`Korvin> what is new?
<korvinbot-local> Derpen created D1: Herped the derp - http://phabricator.net/D1
It shows five.
Reviewers: epriestley
Reviewed By: epriestley
CC: epriestley, aran
Differential Revision: https://secure.phabricator.com/D1666
Summary:
This is pretty simple and unpolished, but it's getting pretty big and it seems
like a reasonable starting point.
- Log chat in various "channels".
- Conduit record and query methods.
- IRCBot integration for IRC logging
Major TODO:
- Web UI is really unpolished and has no search, paging, anchor-linking, etc.
Basically all presentation stuff, though.
- I think the bot should have a map of channels to log with channel aliases?
- The "channels" should probably be in a separate table.
- The "authors" should probably be correlated to Phabricator accounts somehow,
where possible.
Test Plan: Used phabotlocal to log #phabricator.
Reviewers: kdeggelman, btrahan, Koolvin
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T837
Differential Revision: https://secure.phabricator.com/D1625
