Summary:
Ref T11357. When creating a file, callers can currently specify a `ttl`. However, it isn't unambiguous what you're supposed to pass, and some callers get it wrong.
For example, to mean "this file expires in 60 minutes", you might pass either of these:
- `time() + phutil_units('60 minutes in seconds')`
- `phutil_units('60 minutes in seconds')`
The former means "60 minutes from now". The latter means "1 AM, January 1, 1970". In practice, because the GC normally runs only once every four hours (at least, until recently), and all the bad TTLs are cases where files are normally accessed immediately, these 1970 TTLs didn't cause any real problems.
Split `ttl` into `ttl.relative` and `ttl.absolute`, and make sure the values are sane. Then correct all callers, and simplify out the `time()` calls where possible to make switching to `PhabricatorTime` easier.
Test Plan:
- Generated an SSH keypair.
- Viewed a changeset.
- Viewed a raw diff.
- Viewed a commit's file data.
- Viewed a temporary file's details, saw expiration date and relative time.
- Ran unit tests.
- (Didn't really test Phragment.)
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que
Maniphest Tasks: T11357
Differential Revision: https://secure.phabricator.com/D17616
Summary:
Via HackerOne. When you view a raw file in Differential, we currently generate a permanent file with default permissions. This may be incorrect: default permissions may be broader than the diff's permissions.
The other three methods of downloading/viewing raw files ("Download" in Diffusion and Differential, "View Raw" in Diffusion and Differential) already apply policies correctly and generate temporary files. However, this workflow was missed when other workflows were updated.
Beyond updating the workflow, delete any files we've generated in the past. This wipes the slate clean on any security issues and frees up a little disk space.
Test Plan:
- Ran migration script, saw existing files get purged.
- Did "View Raw File", got a new file.
- Verified that the file was temporary and properly attached to the diff, with "NO ONE" permissions.
- Double-checked that Diffusion already runs policy logic correctly and applies appropriate policies.
- Double-checked that "Download Raw Diff" in Differential already runs policy logic correctly.
- Double-chekced that "Download Raw Diff" in Diffusion already runs policy logic correctly.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17504
Summary: Fixes T10169. Diffs with no build targets were incorrectly showing as though they had no test coverage, when we actually want to show them having no coverage information available.
Test Plan: Viewed an older revision, saw a column of "Not Executable" before change, now see no column.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10169
Differential Revision: https://secure.phabricator.com/D15044
Summary: Some linter messages, such as those produced by `ArcanistPHPCompatibilityXHPASTLinterRule`, contain backticks but are currently rendered as Remarkup literals. I think that it is generally desirable to allow lint messages to be rendered as Remarkup, although we should ideally have a way to render Remarkup for use on the command line (I actually think that this already exists, but I don't think that `arc lint` does this when rendering linter messages).
Test Plan: Resubmitted D14481 to my dev install and saw Remarkuped lint messages.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14485
Summary:
Ref T8096. This modernizes the last thing which was reading the old datasource.
Also fix a bug where it didn't work.
Test Plan: {F698405}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8096
Differential Revision: https://secure.phabricator.com/D13852
Summary: Ref T8096. This information has moved into Harbormaster.
Test Plan:
Pushed some test results in; see right margin:
{F698394}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8096
Differential Revision: https://secure.phabricator.com/D13850
Summary: Ref T8096. These are still reading out of the old diff property, but should read from Harbormaster instead.
Test Plan: {F698346}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8096
Differential Revision: https://secure.phabricator.com/D13847
Summary:
Ref T7447. Implements per-viewer comment hiding. Once a comment is obsolete or uninteresting, you can hide it completely.
This is sticky per-user.
My hope is that this will strike a better balance between concerns than some of the other approaches (conservative porting, summarization, hide-all).
Specifically, this adds a new action here:
{F435621}
Clicking it completely collapses the comment into a small icon on the previous line, and saves the comment state as hidden for you:
{F435626}
You can click the icon to reveal all hidden comments below the line.
Test Plan:
- Hid comments.
- Showed comments.
- Created, edited, deleted and submitted comments.
- Used Diffusion comments (hiding is not implemented there yet, but I'd plan to bring it there eventually if it works out in Differential).
Reviewers: btrahan, chad
Reviewed By: btrahan
Subscribers: jparise, yelirekim, epriestley
Maniphest Tasks: T7447
Differential Revision: https://secure.phabricator.com/D13009
Summary: See D12702.
Test Plan: Made something a link and clicked it, seemed to work OK.
Reviewers: chad
Reviewed By: chad
Subscribers: yelirekim, epriestley
Differential Revision: https://secure.phabricator.com/D12703
Summary:
Ref T7447. Ref T7870. When a diff affects more than 100 files, we collapse files by default, then expand files with inlines.
Ghostly inlines currently don't cause files to expand, but reasonably should.
Test Plan:
Before:
{F378065}
After:
{F378066}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: yelirekim, epriestley
Maniphest Tasks: T7447, T7870
Differential Revision: https://secure.phabricator.com/D12495
Summary:
Ref T7447. Ref T7870.
- Forward: When rendering some file "B" which was moved from "A", port ghosts for both "A" and "B" to it.
- Backward: When porting a comment on "X" which was moved from some "Y", allow it to port to a file named "Y" if it can't find a file named "X".
Test Plan:
Before:
{F377809}
After:
{F377806}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7447, T7870
Differential Revision: https://secure.phabricator.com/D12493
Summary:
Ref T7447. This might be overkill, but I want to over-explain things until we have more confidence that this is rarely confusing.
NOTE: I'm playing it a bit fast and loose with `setIsGhost()` (passing a dictionary) because making API changes requires changing the interface and Diffusion, which is a pain. I'll clean this up at the end once the interface is more final. This is well-contained for now.
Test Plan:
- Viewed "base vs 2" in a diff with 3 diffs, saw some "older comments" and some "newer comments".
- Hovered the tags for an explanation of comment spookiness.
{F377703}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7447
Differential Revision: https://secure.phabricator.com/D12490
Summary:
Ref T7447. After compiling inlines which will appear on the changeset, remove inlines which
Later stages remove these anyway, so it doesn't change anything to keep them around, but we can filter them out here cheaply.
This will also let us drive the Differential timeline view with the same logic a few diffs from now, to improve how it renders inlines. Generalize things a little bit.
Test Plan:
- Made a comment on the left of diff 1.
- Made diff 2.
- Viewed diff 2 vs diff 1.
- Verified old-left comment was filtered out by the new loop.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7447
Differential Revision: https://secure.phabricator.com/D12488
Summary:
Ref T7447. This ports comments forward and backward in the best case:
- The old comment is on a changeset with the same filename.
- The old and new files are pretty much the same, line-for-line.
This will fail to port a lot of comments around and probably port a lot of comments into goofy places. We can see how bad it is in practice.
Errata:
- Design is me cobbling something together, probably worth tweaking.
- "Old Comment" should, at a minimum, say "Newer Comment" sometimes, or we should come up with some better name for this stuff.
Test Plan: {F377214}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: johnny-bit, yelirekim, epriestley
Maniphest Tasks: T7447
Differential Revision: https://secure.phabricator.com/D12484
Summary:
Ref T7447. This class is currently a big mess with a lot of `withWeirdSpecialThingUsedInOnePlace()` type qualifiers.
Try to generalize/normalize it a bit.
Test Plan:
- Viewed inline comments.
- Created a new inline comment.
- Edited an inline comment.
- Marked an inline comment complete.
- Deleted, then undeleted an inline comment.
- Previewed inline comments.
- Viewed drafts as another user, verified they don't show up.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: yelirekim, epriestley
Maniphest Tasks: T7447
Differential Revision: https://secure.phabricator.com/D12483
Summary:
This returns the PHID of the current revision owner, or the commit author, if one exists.
NOTE: For drafts, we currently return `null`; I'll fix that in a future change. Should be correct for submitted comments.
Test Plan: Added an inline, nothing seemed broken.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12185
Summary:
Ref T1460. This just barely works, but throwing it up in case any of it sounds mechanically crazy before we build integrations/UI/etc.
Specifically, these are the behaviors:
- You can mark your own draft comments as "done" before you submit them. The intent is to let reviewers mark their stuff advisory/minor/not-important before they submit it, to hint to authors that they don't expect the feedback to necessarily be addressed (maybe it's a joke, maybe it's just discussion, maybe it's "consider..").
- You can mark others' published comments as "done" if you're the revision/commit author. The intent is to keep this lightweight by not requiring an audit trail of who marked what done when. If anyone could mark anything done, we'd have to have some way to show who marked stuff.
- When you mark stuff done (or unmark it), it goes into a "draft" state, where you see the change but others don't see it yet. The intent is twofold:
- Be consistent with how inlines work.
- Allow us to publish a "epriestley updated this revision + epriestley marked 15 inlines as done" story later if we want. This seems more useful than publishing 15 "epriestley marked one thing as done" stories.
- The actual bit where done-ness publishes isn't implemented.
- UI is bare bones.
- No integration with the rest of the UI yet.
Test Plan: Clicked some checkboxes.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: paulshen, chasemp, epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12033
Summary:
Ref T2009. This is another almost-identical copy of the row scaffolding, which has the same 1up/2up bugs as the 8 other copies of this code.
Turn the "undo" element into an InlineCommentView so we can scaffold it.
Then, scaffold it with the same code as everything else.
Test Plan: Hit "Undo", swapped from 1up to 2up, hit "undo" again, swapped back, tried left/right, everything rendered with proper scaffolding.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12019
Summary:
Fixes T4452. Ref T2009. There's a hierarchy of changeset rendering power: only low-level calls, use of ChangesetDetailView, then use of ChangesetListView (a list of DetailViews).
Prior to work here, the various changeset rendering controllers got their hands dirty to varying degrees, with some using only the lowest-level rendering pipeline:
- Phriction: no view (lowest level)
- Diffusion: DetailView
- Differential Changeset: DetailView
- Differential Diff: ListView
- Differential Revision: ListView
I brought Phriction up to use DetailView, but want to bring everything all the way up to use ListView. Each composition layer adds more features to diff browsing. In particular, this change enables "Highlight As", switching 1up vs 2up, adding inlines, etc., on the standalone view.
Test Plan:
- Viewed a changeset standalone. Could change highlighting, switch 1up vs 2up, add and edit inlines, etc.
- Viewed a revision; no behavioral changes.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4452, T2009
Differential Revision: https://secure.phabricator.com/D12012
Summary: Ref T2009. It doesn't make sense to have these as separate behaviors. We require a ChangesetViewManager to track view parameter state.
Test Plan: Interacted with changesets in Phriction, Differential and Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11979
Summary:
Ref T2009. Currently, we do not persist view parameters when making context rendering requests.
The big one is the renderer (1up vs 2up). This makes context on unified diffs come in with too many columns.
However, it impacts other parameters too. For example, at HEAD, if you change highlighting to "rainbow" and then load more context, the context uses the original highlighter instead of the rainbow highlighter.
This moves context loads into ChangesetViewManager, which maintains view parameters and can provide them correctly.
- This removes "ref"; it is no longer required, as the ChangesetViewManager tracks it.
- This removes URI management from `behavior-show-more`; it is no longer required, since the ChangesetViewManager knows how to render.
- This removes "whitespace" since this is handled properly by the view manager.
Test Plan:
- Used "Show Top" / "Show All" / "Show Bottom" in 1-up and 2-up views.
- Changed file highlighting to rainbow, loaded stuff, saw rainbow stick.
- Used "Show Entire File" in 1-up and 2-up views.
- Saw loading chrome.
- No loading chrome normally.
- Made inlines, verified `copyRows()` code runs.
- Poked around Diffusion -- it is missing some parameter handling, but works OK.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11977
Summary:
Ref T2009. This clears the stage for D11977.
Specifically, D11977 moves "show context" logic into ChangesetViewManager, but those objects won't exist if we don't run "behavior-populate" first.
Generally, this increases consistency across changeset views -- which is still very low overall, but getting slightly better.
Both of these should probably move up more and use ChangesetListView, but we don't need to do that quite yet.
Test Plan:
- Took changeset actions in Phriction diff view.
- Took changeset actions in Differential standalone view.
- Took changeset actions in normal Differential view.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11978
Summary: Ref T2009. These aren't good enough to actually use so I won't land this yet, but it makes testing changes a lot easier.
Test Plan:
- Swapped setting.
- Loaded revisions.
- Saw setting respected.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11972
Summary:
Ref T7094. We should do a policy query on the files IMO because there exists a scenario where the file gets locked down directly. This requires being a bit more disciplined about setting user, which in turn requires deciding whether or not to show edit / reply links as a separate piece of logic, not conditional on user presence.
This is not the best code but I don't think it gets worse with this and is just some other nuance in any larger cleanup we take on someday.
Test Plan: looked at a revision and noted inline comments rendered correctly with reply / edit actions. looked at a diff standalone and noted no reply / edit actions as expected. looked at a "details" link on a transaction and it rendered correctly. looked at a diff in phriction of page edits and it looked good. grepped around and verified the remaining callsite in diffusion already has the setUser call.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7094
Differential Revision: https://secure.phabricator.com/D11579
Summary: Ref T5894. We have a couple more similar cases. Make them all do a decision-based redirect for now.
Test Plan: Did "View Raw File" and such, and also made sure thumbnails still work.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5894
Differential Revision: https://secure.phabricator.com/D10301
Summary:
Ref T5446.
- For all callsites which do not specify a value, set `false` explicitly.
- Make `true` the default.
Test Plan: Used `grep`, then manually went through everything.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5446
Differential Revision: https://secure.phabricator.com/D9687
Summary: Ref T5179. Ref T4045. Ref T832. We can now write non-utf8 hunks into the database, so try to do more reasonable things with them in the UI.
Test Plan: (See screenshots...)
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T832, T4045, T5179
Differential Revision: https://secure.phabricator.com/D9294
Summary: Ref T4045. Ref T5179. This removes all non-Query hunk loads.
Test Plan:
- Viewed revisions.
- Viewed standalone changesets.
- Viewed raw old/new files.
- Viewed vs diffs.
- Enabled inline comments in mail and sent some transactions with inlines.
- Called `differential.getrawdiff`.
- Grepped for `loadHunks()`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4045, T5179
Differential Revision: https://secure.phabricator.com/D9289
Summary: Ref T2222. Ref T1790. I partially modernized this recently, but bring it to the mail version too.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: zeeg, aran
Maniphest Tasks: T1790, T2222
Differential Revision: https://secure.phabricator.com/D8294
Summary:
Fixes T3034. This is obsoleted by modern policies.
This was written by a Facebook intern and is rarely used -- the Hive install might be the only use in the wild. It has never really worked correctly.
Test Plan: `grep`; browsed Differential.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3034
Differential Revision: https://secure.phabricator.com/D7568
Summary: Ref T603. Swaps out most `PhabricatorFile` loads for `PhabricatorFileQuery`.
Test Plan:
- Viewed Differential changesets.
- Used `file.info`.
- Used `file.download`.
- Viewed a file.
- Deleted a file.
- Used `/Fnnnn` to access a file.
- Uploaded an image, verified a thumbnail generated.
- Created and edited a macro.
- Added a meme.
- Did old-school attach-a-file-to-a-task.
- Viewed a paste.
- Viewed a mock.
- Embedded a mock.
- Profiled a page.
- Parsed a commit with image files linked to a revision with image files.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7178
Summary:
Ref T603. Make Differential behaviors for logged-out and underprivleged users more similar to other apps.
I'm going to drop this "anonymous access" thing at some point, but `reviews.fb.net` actually looks like it's running semi-modern code, so leave it alive until we have a more compelling replacement in the upstream.
Test Plan: As a logged out user, browsed Differential and clicked things and such.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7148
Summary:
Ref T603. Ref T2625. Fixes T3241. Depends on D5451. Depends on D6346.
@wez, this changes the Differential revision list UI substantially and may generate a lot of bikeshedding / who-moved-my-cheese churn. See T3417 for context, for example. The motivations for this change are:
- The list now works on devices, like phones and tablets. This is a requirement to make the rest of Differential work on devices.
- Although ApplicationSearch intentionally presents a simpler interface initially and some options which were one click away before aren't now, it is much more powerful than the search it replaces and allows users to build, save, share, fork, edit, and customize a much wider range of queries. Users who used the old filters frequently can use Advanced Search -> Save Custom Query to create new versions of them, and of any other query. "Edit Queries.." allows users to remove and reorder queries, including builtin queries. Basically, there are like three things which have gone from "1-click" to "a few clicks", and ten trillion things which have gone from "hard/impossible" to "relatively easy".
The local screenshots look a bit iffy, but I think a lot of this is the fakenesss of my test data. If they still feel iffy in production we can tweak them until they feel good, like we did for Maniphest.
Test Plan:
{F48477}
{F48478}
Reviewers: btrahan, chad, wez
Reviewed By: btrahan
CC: aran, s
Maniphest Tasks: T603, T2625, T3241
Differential Revision: https://secure.phabricator.com/D6347
Summary: Ref T2222. I didn't translate this query properly; reproduce the original.
Test Plan: When viewing a revision with non-draft inline comments by a user other than the viewer, the inline comments now appear on the changesets themselves.
Reviewers: kawakami, btrahan, garoevans
Reviewed By: garoevans
CC: aran, mbishopim3
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D6281
Summary:
Ref T2222. See D6260.
Push all this junk behind a Query so I can move the storage out from underneath it.
Test Plan: Viewed home page, list view, revision. Made draft, looked at preview, submitted draft, viewed inline, replied to inline.
Reviewers: btrahan
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D6262
Summary: I cheated in a couple of places here, but this is in the process of getting refactored anyway, and there's a pretty clear boundary.
Test Plan: Viewed changesets in Differential, viewed standalone. Viewed context elements.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T2432
Differential Revision: https://secure.phabricator.com/D4723
Summary:
Went through this last night, I had to remove some static vars, but didn't see that as a huge perf issue.
Lint
Test Plan: Tested numerous differential pages, creating a diff, commenting, editing.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4617
Summary:
- Add a query parameter to select the diff renderer.
- When we populate diffs, use the 1-up renderer if the device isn't a desktop. Don't switch renderers once the page has loaded since it will be a tremendous mess. We can add an "always use 1-up" preference later.
- Tweak JX.Device so we avoid a race condition, where `JX.Device.getDevice()` may not be valid when other behaviors run.
- Implement enough of the 1-up HTML renderer to provide a vague hint that it actually works.
- Fix a couple of bugs with primitive construction.
Test Plan:
{F29168}
{F29169}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D4423
Summary:
assume at least 360px for a given code pane. that's about when the comment box starts fighting back anyway. we'll use the yet-to-be-built one page render for the narrow viewport cases.
This address the cases as laid out in T2005. It fails the "MMMMM" case pretty horribly. However, if there is a space it works just fine and presumably folks are stretching out their windows on big glorious monitors at 160 characters wide or whatever.
Re-factored things just a tad but figure I'll take a nice big chunk of "renderer" to move forward T2009
Test Plan: looked at all sorts of funky diffs
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, aran, Korvin
Maniphest Tasks: T2005
Differential Revision: https://secure.phabricator.com/D4083
Summary:
This commit doesn't change license of any file. It just makes the license implicit (inherited from LICENSE file in the root directory).
We are removing the headers for these reasons:
- It wastes space in editors, less code is visible in editor upon opening a file.
- It brings noise to diff of the first change of any file every year.
- It confuses Git file copy detection when creating small files.
- We don't have an explicit license header in other files (JS, CSS, images, documentation).
- Using license header in every file is not obligatory: http://www.apache.org/dev/apply-license.html#new.
This change is approved by Alma Chao (Lead Open Source and IP Counsel at Facebook).
Test Plan: Verified that the license survived only in LICENSE file and that it didn't modify externals.
Reviewers: epriestley, davidrecordon
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2035
Differential Revision: https://secure.phabricator.com/D3886
Summary:
all sorts of stuff
- made comment form width flexible
- made margins element specific rather than part of differential-primary-pane
- made box elements all veritically align left and right until code stuff
- re-factored width calculaton stuff a bunch so only the code section has to suffer from max-width calculations; everything else can flex
- made colspan 3 for rightmost table header element. this is so the "View Options" UI element ends up lining up correctly with the "Show All Lines" element just below
Test Plan: looked at revision view and changeset view and it all looked hot. note I did not test what things looked like with different word wrap values; that should still work given the re-factoring and not re-design here. also toggled haunted panel mode and it looked good.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2006
Differential Revision: https://secure.phabricator.com/D3866
Summary:
See T1963 for discussion of the Facebook-specific hack.
Differential currently uses a one-stage cache (render -> postprocess -> save in cache) rather than the two-stage cache (render -> save in cache -> postprocess) offered by `PhabricatorMarkupInteface`. This breaks Differential comments coming out of cache for the lightbox, and makes various other things suboptimal (status of handles like @mentions and embeds are not displayed accurately).
Instead, use the modern stuff.
Test Plan:
- Created preview comments and inlines in Differential.
- Edited a Differential inline.
- Submitted main and inline Differential comments.
- Viewed and edited Differential summary and test plan.
- Created preview comments and inlines in Diffusion.
- Submitted comments and inlines in Diffusion.
- Verified Differential now loads and saves to the generalized markup cache (Diffusion is close, but main comments still hold a single-stage cache).
- Verified old Differential comments work correctly with the lightbox.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1963
Differential Revision: https://secure.phabricator.com/D3804
Summary:
I've replaced all `id(new PhabricatorObjectHandleData(...))->loadHandles()` by `$this->loadViewerHandles(...)`.
Lint caught one usage in a static method.
Test Plan: Displayed revision with sporadic author.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3432
Summary:
In a revision with multiple diffs like
https://secure.phabricator.com/D3168?vs=6094&id=6095
clicking "Show Raw File (Left)" while comparing diffs 1 and 2 brings up
the version from base, instead of from diff 1. This is because the hunks
are stored as diffs between base and diff X, and the raw file is
generated from the hunks. This introduces a hack which is probably not
actually correct but seems to work for the 90% case.
(The "Show Raw File (Right)" button was and remains correct.)
Test Plan: Click raw file buttons while comparing different diffs.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3169
