Summary: Ref T10246. Build an ngram index for Almanac services, and use it to support improved search.
Test Plan: {F1121725}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10246
Differential Revision: https://secure.phabricator.com/D15321
Summary:
These trip me up every time because Differential has:
> Comment, Accept, Request Changes, Resign, Commandeer, Add Reviewers, Add Subscribers
while audits currently show:
> Comment, Add Subscribers, Add Auditors, Accept, Raise Concern, Resign
Now they're more or less in the same order which helps with muscle memory.
Test Plan: Careful inspection.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15323
Summary:
Fixes T10205. Ref T10246. Previously, the issue was that the result set was not ordered, so "More Results" would not have been able to work in a reasonable way if there were more than 100 matching interfaces.
You would have seen 100 interfaces more or less at random, then clicked "more" and gotten 100 more random interfaces.
Now, you would see 100 "a" interfaces, then click more to get the next 100 alphabetical interfaces (say, "b" and "c" interfaces).
Test Plan:
- Clicked browse when binding an interface.
- Got a browse dialog.
- Artificially set query limit to 1, paged through "local" interfaces in an ordered, consistent way.
{F1121313}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10205, T10246
Differential Revision: https://secure.phabricator.com/D15320
Summary:
Ref T10205. Ref T10246. This is general modernization, but also supports fixing the interface datasource in T10205.
- Update Query.
- Update SearchEngine.
- Use an ngrams index for searching names efficiently.
Test Plan:
- Ran migrations.
- Searched Almanac devices by name.
- Created a new device, searched for it by name.
{F1121303}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10205, T10246
Differential Revision: https://secure.phabricator.com/D15319
Summary: Not terribly useful. Also removed close your stuff reminder.
Test Plan: View question I asked and strangers question. Both layout more normal like.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15312
Summary: Ref T10394. Currently, these rules are only active if the Macro application is installed. Instead, install them unconditionally.
Test Plan:
- Used `{icon camera}` with Macro installed and uninstalled.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10394
Differential Revision: https://secure.phabricator.com/D15311
Summary: Swapping out to PHUIDocumentProView to remove all calls to PHUIDocumentView.
Test Plan: Review the Phabricator Readme.MD in Diffusion
Reviewers: epriestley, avivey
Reviewed By: avivey
Subscribers: avivey, Korvin
Differential Revision: https://secure.phabricator.com/D15308
Summary:
WMF ran into this after their update. Here's the setup:
- When you enable Spaces, we leave all existing objects set to `null`, which means "these belong to the default space". This is so we don't have to go update a trillion objects.
- New objects get set to the default space explicitly (`PHID-SPCE-...`) but older ones stay with `null`.
- If you edit an older object (like a task) from the time before Spaces, //and// the form doesn't have a Visbility/Spaces control, we would incorrectly poplate the value with `null` when the effective value should be the default space PHID.
- This caused a "You must choose a space." error in the UI.
Instead, populate the control with the effective value instead of the literal database value. This makes the edit go through cleanly.
Also add a note about this for future-me.
Test Plan:
- Disabled "Visibility" control in task edit form.
- Edited an old task which had `null` as a `spacePHID` in the database.
- Before patch: UI error about selecting a Space.
- After patch: edit goes through cleanly.
Reviewers: chad, 20after4
Reviewed By: chad, 20after4
Subscribers: 20after4, aklapper
Differential Revision: https://secure.phabricator.com/D15306
Summary:
Ref T4245. This could still use a little UI smoothing, but:
- Don't require a callsign on the create flow (you can add one later in "Edit Basic Information" if you want).
- Allow existing callsigns to be removed.
Test Plan:
- Created a new repository with no callsign.
- Cloned it; pushed to it.
- Browsed around Diffusion a bunch.
- Visited a commit URI.
- Added a callsign to it.
- Removed the callsign again.
- Referenced it with `R22` in remarkup.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15305
Summary:
Ref T4245. This is a prelude to removing them from the "create" screen.
Currently, if you try to delete the callsign you get an unceremonious database error, but the next diff (or maybe two) will permit that, so I didn't put any "this is required yada yada" text in.
This could also maybe use some big flashing warning lights and a "if you edit this, all your URIs break" but I'll save that for later.
Test Plan: Changed the callsign for a repository.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15304
Summary: Ref T4245. When creating new repositories, set a default local path based on the repository ID instead of callsign.
Test Plan:
- Created a new repository.
- Saw it get a reasonable, ID-based local path.
- Edited a repository to make sure the `applyFinalEffects()` wasn't doing anything whacky.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15303
Summary: Ref T4245. Consolidates the URI parsing/rewriting logic so that repositories can be served from either `/diffusion/XYZ/` or `/diffusion/123/`, over both HTTP and SSH.
Test Plan:
- Pulled a Git repository by ID and callsign over HTTP and SSH.
- Pulled a Mercurial repository by ID and callsign over HTTP and SSH.
- Pulled a Subversion repository by ID and callsign over SSH (no HTTP support for SVN).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15302
Summary:
Ref T4245. Make `/diffusion/123/` work, but redirect the user to `/diffusion/XYZ/` if the repository has a callsign.
(Right now, every repository has a callsign, so this always redirects.)
Also redirect `/R123:abcdef` if the repository has a callsign.
Also also, move the Pull garbage collector somewhere more sensible.
Test Plan:
- Added test coverage.
- Visited `/diffusion/1/`, was redirected.
- Visited `/diffusion/R1:abcdef`, was redirected.
- Browsed Diffusion normally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15301
Summary: Ref T10349.
Test Plan:
- Added archived and unarchived project tags to a task.
- Saw unarchived tags, only, on cards.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10349
Differential Revision: https://secure.phabricator.com/D15297
Summary: Ref T4245. This currently accepts only callsigns; prepare it for the bright new callsign-optional world.
Test Plan:
- Ran `./bin/diviner generate --repository 1 --book src/docs/book/flavor.book --clean`, got a good result.
- Ran `./bin/diviner generate --repository 239238 --book src/docs/book/flavor.book --clean`, got an appropraite error about a bad repository identifier.
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15296
Summary: Ref T4245. This has no callers.
Test Plan:
- Ran `git grep -i 'getCallsign('` and visually verified that no callers could reasonably be `DiffusionRequest` objects (there are only 23 remaining sites, and about half are `$this->...` in `PhabricatorRepository`.
- Browsed around directory/file/branch/content/diff/etc pages in Diffusion.
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15295
Summary:
Ref T4245. We pass this exclusively for use by additional third-party hooks.
This is technically a backward compatibility break, but I suspect it doesn't affect anyone:
- Probably almost no one is using this (there are few reasons to, even for the tiny number of installs with custom commit hooks).
- If they are, there's a good chance the PHID will work anyway, since nearly all scripts and Conduit methods will accept it in place of a callsign now, and if it's in logging or debugging code the PHID is a reasonable substitute
- Even if it doesn't just keep working, the break should be very obvious in most reasonable cases.
I'll call this out explicitly in the changelog, though -- almost everything else will just continue working, but this is a strict compatibility break.
Test Plan:
- Ugh.
- Picked a hosted Git repo out of Diffusion.
- Went to the path on disk.
- Went into `hooks/`.
- Went into `pre-receive-phabricator.d/`.
- Wrote this hook and gave it `chmod +x`:
```name=stuff.sh
#!/bin/sh
echo $PHABRICATOR_REPOSITORY >> /tmp/stuff.log
```
- Pushed to the repository.
- Saw a PHID show up in the log:
```
$ cat /tmp/stuff.log
PHID-REPO-bqkcdp47euwnwlasrsrh
```
Reviewers: chad, avivey
Reviewed By: avivey
Subscribers: avivey
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15294
Summary:
Ref T4245. Two effects:
- First, let hooks work for future repositories without callsigns.
- Second, provide a better error when users push directly to hosted repositories.
Test Plan: Ran `bin/commit-hook PHID-REPO-xxx`.
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15293
Summary: Working towards making PHUITwoColumnView into a page layout engine. Adds header support.
Test Plan: Use new header on Profile and Profiles. No visual changes, less duplicated code.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15292
Summary: Attempting to clean PHUIObjectBoxView up a little as well as finally being able to `addClass` on the sucker. I'm running into some issue with `addTabs` though, which on Files isn't firing.
Test Plan: Bounce around tons of screens.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15291
Summary:
Ref T10349. This capability didn't make a ton of sense when you had to be a member to watch a project and watch rules were simple, but makes more sense now.
A particular use case might be finding all the stuff you're watching so you can prune it.
Test Plan: Searched for stuff I was watching, got accurate results.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10349
Differential Revision: https://secure.phabricator.com/D15289
Summary: We're using this a little more, so I'd prefer less copy-pasta and one place to manage the UI. Maybe add a caret?
Test Plan: grep for 'Actions', test Phriction, Diviner, ect, Action Menus.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15288
Summary: Fixes T9562. We already do this for tags, but didn't have similar logic for branches. Implement that logic.
Test Plan:
- Set limit to 1, saw "More branches", clicked it, got the correct results.
- Verified that branch table with no specified commit still works properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9562
Differential Revision: https://secure.phabricator.com/D15284
Summary: Uses the background color changes to show also on the side nav. Places color on entire body so fullscreen doesn't show other body color.
Test Plan: Review various workboard colors at normal and fullscreen
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15283
Summary:
Fixes T10304. In Mercurial, we must enumerate the whole file tree. Currently, we incorrectly count files within directories (which won't be shown) toward the "100 file" limit at top level, so directories with more than 100 subpaths are truncated improperly.
This is approxiately the same as @richardvanvelzen's fix.
Test Plan: Viewed a large Mercurial repository, saw a complete directory listing.
Reviewers: chad
Reviewed By: chad
Subscribers: richardvanvelzen
Maniphest Tasks: T10304
Differential Revision: https://secure.phabricator.com/D15282
Summary: Moves all the one off object calls to PHUIRemarkupView, adds a "Document" call as well (future plans).
Test Plan: Visited most pages I could get access to, but may want extra careful eyes on this diff.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15281
Summary:
Ref T10349. These got sort of half-weirded-up before I separated subscriptions and watching fully. New rules are:
- You can watch whatever you want.
- Watching a parent watches everything inside it.
- If you're watching "Stonework" and go to "Stonework > Masonry", you'll see a "Watching Ancestor" hint to let you know you're already watching a parent or ancestor.
Test Plan:
- Watched and unwatched "Stonework".
- Watched and unwatched "Stonework > Iteration IV".
- While watching "Stonework", visited "Iteration IV" and saw "Watching Ancestor" hint.
- Created a task tagged "Stonework > Iteration IV". Got notified about it because I watch "Stonework".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10349
Differential Revision: https://secure.phabricator.com/D15280
Summary: Should make it simpler here to have more `rgba` rules in CSS for things like hovers, selected states. Maybe only use `rgb` colors? Color pallette probably needs an overhaul.
Test Plan: Bounce around random pages, buttons, menus. Everything appears normal.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15273
Summary:
Adds a UI for selecting background colors.
You can choose "Use Parent", which is the default, and allows you to set a color that all descendants inherit.
You can also choose "None", if a parent has a WHACKY BACKGROUND that you refuse to put up with.
Test Plan:
{F1114588}
{F1114589}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15279
Summary:
This gives us room for less-common workboard management options like "Disable Board" without overloading the menus on the main board.
Particularly, we can add background color options here without anything getting weird.
I've left "Add Column" on the main UI since I think it's common enough to leave there. We could probably move "Hide Column" to this UI in the future, though.
Test Plan: {F1114475}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15278
Summary:
Ref T10349. At HEAD, if you create a task //on a board//, it floats to the top correctly.
If you create a task elsewhere and tag it with the board, you were subject to the whims of the layout engine and it would generally end up on the bottom.
Instead, make the rules consistent so that "virtual" positions (of tasks which haven't been committed to a particular position yet) still float to the top.
Test Plan:
- Created tasks from a board.
- Created tasks from Maniphest, then looked at them on a board.
- Moved tasks around.
- In all cases, newly created tasks floated to the top.
- Sorted by natural and priority.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10349
Differential Revision: https://secure.phabricator.com/D15276
Summary: Fixes T10361.
Test Plan:
- Created a poll with an embedded file and a mention of a task.
- Verified file was attached properly.
- Verified mention appeared on task.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10361
Differential Revision: https://secure.phabricator.com/D15277
Summary: Fixes T10360. In modern code, most of the meat is automatic.
Test Plan:
- Edited view policy and edit policy from web UI.
- Viewed package, saw policy badge in header.
- Tried to edit a package as a user without permission, got appropriate disabled states and errors.
- Changed policies via Conduit.
- Tried to view a package as a user without permission.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10360
Differential Revision: https://secure.phabricator.com/D15275
Summary:
Fixes T10357.
- Show a better (more descriptive) error message when a user who can't create projects tries to create a subproject or milestone.
- Disable the subproject actions if you don't have create permission.
All this stuff was already enforced properly: this diff doesn't make any actual policy changes, just improves the UI for users who lack permission.
Test Plan:
- As an unprivileged user (no "Can Create Projects"), tried to create a subproject or milestone.
- After patch, got a disabled action, with more specific and helpful error than before.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10357
Differential Revision: https://secure.phabricator.com/D15274
Summary: Makes these pages a dialog endpoint, keeping you on the Workboard when possible.
Test Plan: Create a Column, Edit a Column, visit hard page. Test letters in the points field.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15270
Summary: Cleans up the backgrounds a little on Projects/Profiles and adds a number of colour choices for Workboards.
Test Plan:
Manually add each color for testing. Test new project / profile layouts with and without properties.
{F1109325}
{F1109326}
{F1109327}
{F1109328}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15269
Summary:
Ref T10349. Columns have the same policies as the projects they belong to.
However, the current implementation just returns the policy directly. This usually works, but if the project has a policy like "Members of (This) Project", the policy filter tries to check if the viewer is a member of //the column itself//. That doesn't work, since columns don't have members. This leads to a situation where columns on "Editable By: Project Members" projects can not be edited.
Instead, return a permissive base policy and then use an extended policy to bind the column policy to the project policy.
Test Plan:
- Edited a column on an "Editable By: Members of Project" board.
- Added and ran a unit test covering this case.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10349
Differential Revision: https://secure.phabricator.com/D15268
Summary:
Ref T10349. Instead of showing columns in "Backlog, Custom, Sprint 1, Sprint 2, Sprint 3" order, show the sprints in reverse order: 3, 2, 1.
This makes it easier to get to the new stuff, and you don't have to drag over older stuff or archive it immediately.
Trello's own meta-board for Trello development is a good example of this in the wild: older stuff goes out to the right, so you can get to the newer stuff easily:
https://trello.com/b/nC8QJJoZ/trello-development
Test Plan: Saw board in 3, 2, 1 order instead of 1, 2, 3.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10349
Differential Revision: https://secure.phabricator.com/D15267
Summary: Ref T10350. Normally, milestone numbers and IDs have the same order, but they may not if you used the script in T10350 to artificially move a bunch of stuff around.
Test Plan: Milestones now go "1, 2, <thing I artifically moved into position 3>" on local install.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10350
Differential Revision: https://secure.phabricator.com/D15266
Summary:
Fixes T10346. You finally wrung a clue out of the reporter and I think I figured this out.
Here's the bug:
- Create a project with a workboard and subprojects/milestones.
- Create a new project, import columns from the first project.
- We incorrectly import empty columns for the subprojects/milestons.
Instead, skip proxy columns during import.
Also, allow "hide column" to continue on missing fields, so columns with no name can be hidden.
Test Plan:
- Did the stuff above.
- Workboard no longer populated with a bunch of "Unnamed Column" columns.
- Hid several "Unnamed Column" columns.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10346
Differential Revision: https://secure.phabricator.com/D15265
Summary: This just hides them, should still show on "View All".
Test Plan: Hide a Milestone, no longer see it on home. Click "View All", see all Milestones.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15264
Summary: Fixes T10347. In the long run maybe we'll try to guess this better, but for now get rid of the "Milestone X" hardcode and just show what the last one was called.
Test Plan:
- Created the first milestone for a project.
- Created the nth milestone for a project.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10347
Differential Revision: https://secure.phabricator.com/D15262
Summary:
Fixes T10285.
- If a result (like a milestone) has no primary hashtag, try to fill in a secondary hashtag.
- If we can't find any hashtag, don't return the result.
This produces these behaviors:
- By default, you can't autocomplete milestones.
- If you give one a hashtag, you can.
We might want to give milestones "special" hashtags eventually (like `#xyz/33`) but this fixes the confusing/broken behavior in the UI and we can wait for a better use case for letting you autocomplete milestones, I think.
Also, don't try to cycle hashtags when renaming milestones. This was a little inconsistent before.
Test Plan:
- Autocompleted normal projects.
- Autocompleted milestones with explicit hashtags.
- No autocomplete entry for milestones with no special hashtags.
- Used normal typeahead to get tag-less milestones to make sure I didn't break anything.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10285
Differential Revision: https://secure.phabricator.com/D15261
Summary: Fixes T10310. This replaces the "Hide Column" / "Show Column" option for milestone columns with one that archives/unarchives, and hides milestone columns when the milestone project is archived.
Test Plan:
- Hid and unhid a normal column (got normal dialogs).
- Hid and unhid a milestone column (got "archive project" dialogs, underlying project archived/unarchived, column vanished).
Reviewers: hach-que, #blessed_reviewers, chad
Reviewed By: #blessed_reviewers, chad
Subscribers: jcowgar, Korvin
Maniphest Tasks: T10310
Differential Revision: https://secure.phabricator.com/D15231
Summary:
Fixes T10264. I'm reasonably confident that this is the chain of events here:
First, prior to 8269fd6e, we would ignore "Content-Encoding" when reading inbound bodies. So if a request was gzipped, we would read a gzipped body, then give `git-http-backend` a gzipped body with "Content-Encoding: gzip". Everything matched normally, so that was fine, except in the cluster.
In the cluster, we'd accept "gzip + compressed body" and proxy it, but not tell cURL that it was already compressed. cURL would think it was raw data, so it would arrive on the repository host with a compressed body but no "Content-Encoding: gzip". Then we'd hand it to git in the same form. This caused the issue in 8269fd6e: handing it compressed data, but no "this is compressed" header.
To fix this, I made us decompress the encoding when we read the body, so the cluster now proxies raw data instead of proxying gzipped data. This fixed the issue in the cluster, but created a new issue on non-cluster hosts. The new issue is that we accept "gzip + compressed body" and decompress the body, but then pass the //original// header to `git-http-backend`. So now we have the opposite problem from what we originally had: a "gzip" header, but a raw body.
To fix //this//, we could do two things:
- Revert 8269fd6e, then change the proxy request to preserve "Content-Encoding" instead.
- Stop telling `git-http-backend` that we're handing it compressed data when we're handing it raw data.
I did the latter here because it's an easier change to make and test, we'll need to interact with the raw data later anyway, to implement repository virtualization in connection with T8238.
Test Plan: See T10264 for users confirming this fix.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10264
Differential Revision: https://secure.phabricator.com/D15258
Summary:
This commit adds the `transactionID` field to manphest.gettransactions, to
satisfy the request in T10327
Test Plan: Call the `maniphest.gettransactions` endpoint, verify `transactionID` is present
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: chad, Korvin
Differential Revision: https://secure.phabricator.com/D15250
Summary:
Fixes T6641. This allows users who have permission to edit a project to use "Save as Default" to save the current order and filter as defaults for the project.
These are per-board defaults, and apply to all users. The rationale is that I think the best default ordering/filtering depends mostly on the board, not the viewer.
This seems to align with most requests in the task, although rationale is a bit light. But, for example, it seems reasonable you might want to change the default filter to "All Tasks" on a sprint board, so you can see what's in the "Done" column.
This also fixes some minor issues I ran into:
- Herald could hit an issue while checking permissions if the project was a subproject and a non-member had a triggering rule.
- "Advanced filter..." did not prefill with the current filter.
Test Plan:
- Set default order and filter on a workboard.
- Reloaded board, saw settings stick.
- Tried to edit a board as an unprivileged user (disabled menu items, error).
- Reviewed transaction log.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6641
Differential Revision: https://secure.phabricator.com/D15260
Summary:
Fixes T10343. All solutions here seem basically fine. I think adding this small bit of complexity is OK, and sorrrrt of like this behavior sometimes.
- Allow disabling this behavior per-status.
- Disable it by default for "Invalid" and "Duplicate" (I left "wontfix", since that's a resolution?).
Beyond being more flexible, I think this is slightly better?
Test Plan:
- Closed a task as invalid: no claim.
- Closed a task as resolved: claim.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10343
Differential Revision: https://secure.phabricator.com/D15257
Summary: Ref T4427. Seems fine / not egregiously broken.
Test Plan: Edited points configuration. Tried to set a bad value. Set a good value. Persued examples and help text.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4427
Differential Revision: https://secure.phabricator.com/D15256
Summary: minor spacing updates, but i need to likely take a more details pass, specifically points look janky with project tags since they are not in the same `li`.
Test Plan: Zoom into tags, see they all are same height and align.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15255
Summary: Mimics the Project Hovercards, more custom UI.
Test Plan: Hover over person with and without badges, hover over project.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15253
Summary:
Fixes T10330.
- Anywhere we support "matches regexp", also allow "does not match regexp". Although you can sometimes write a clever negative regexp, these rules are better expressed with "does not match <simple regexp>" anyway, and sometimes no regexp will work.
- Always allow "does not contain" when we support "contains".
- Fix some JS issues with certain rules affecting custom fields.
Test Plan:
- Wrote an "Affected files do not match regexp" rule that required every diff to touch "MANUALCHANGELOG.md".
- Tried to diff without the file; rejected.
- Tried to diff with the file; accepted.
- Wrote a bunch of "contains" and "does not contain" rules against text fields and custom fields, then edited tasks to trigger/observe them.
- Swapped the editor into custom text, user, remarkup, etc fields, no more JS errors.
{F1105172}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10330
Differential Revision: https://secure.phabricator.com/D15254
Summary: Also adds the commit to the header underneath the title. Ref T7628
Test Plan: Review a few Diffusion pages.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T7628
Differential Revision: https://secure.phabricator.com/D15246
Summary: These are not needed I think? and handy for cut and paste. Fixes T7628
Test Plan: cut and paste easier from commit hash.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T7628
Differential Revision: https://secure.phabricator.com/D15245
Summary:
These columns were conflating `projectPHID` (the defualt project to add to the task) with `boardPHID` (the board the column appears on).
Separate them to fix the beahvior.
Test Plan: Used "Add Task" from dropdown menu of a milestone column on a parent project's workboard.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15242
Summary: I missed this during cleanup.
Test Plan: Go to a project, then: Subprojects, Create Milestone, Cancel. No longer 404/fatals.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15241
Summary:
Fixes T8197. Currently, if you priority-sort a workboard and drag a card to the top or bottom, we change the priority even if we do not need to.
For example, if the lowest priority in a column is "Low", and you drag a "Wishlist" task underneath it, we incorrectly increase the priority of the task to "Low", when we do not actually need to touch it. This is bad/confusing.
A similar thing happens when dragging a "High" priority task to the top of a column where the highest priority is currently "Normal".
Test Plan:
- Create a column with a "Normal" task.
- Sort workboard by Priority.
- Drag a "High" task above it. After patch: task still "High".
- Drag a "Wishlist" task below it. After patch: task still "Wishlist".
Also dragged a ton of tasks into the middle of other tasks.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8197
Differential Revision: https://secure.phabricator.com/D15240
Summary:
Fixes T6580. Now:
- Empty field means "unlimited".
- Zero means 0.
- Nonzero means that number.
(Although you can now have fractional points, I didn't change columns to allow fractional limits, because too bad.)
Test Plan: {F1103688}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6580
Differential Revision: https://secure.phabricator.com/D15239
Summary: Ref T4427.
Test Plan:
- Dragged a 17 XP task from "Hunting" to "Slain".
- Saw 17 XP move.
- Level up!
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4427
Differential Revision: https://secure.phabricator.com/D15237
Summary:
Ref T4900. Briefly:
- Much more layout and rendering is now done in Javascript.
- This should otherwise be identical to the behavior at HEAD, except that:
- editing a task and removing the current board from it no longer removes the task; and
- points still don't work.
However, this can now plausibly support realtime workboard updates and other complex state-based behaviors like points calculations in a future change.
Test Plan:
- Changed card covers.
- Moved cards.
- Sorted board by priority and natural.
- Added new cards.
- Edited cards in place.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15234
Summary:
Ref T4900. To eventually support realtime board updates, we need to be able to perform a board state update without the context of the action which caused it.
For example, if the server says "update card Y", we need to know what to do without being told "card Y was moved from column A to column B" explicitly. Currently, all the update code relies on knowing what happened and which nodes were affected.
This is only a small step forward, but starts making things a bit more independent and consistent.
Test Plan:
- Moved cards around.
- Changed card cover images.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15228
Summary:
Ref T4900. Broadly, workboard state management is fairly ad-hoc now, which makes things like this (where some kind of edit affects global state) difficult:
- Updating points header to reflect a sum change after dragging a task.
- Changing progress bars after editing a task to change resolution or points value.
- Moving a card to the correct column after editing it and changing subprojects/iterations.
- Responding to real-time notifications about other users moving cards.
This begins rewriting the code in a way that can better accommodate these kinds of far-reaching state update.
This change just moves cover image stuff. I'll continue moving features one at a time until boards work better.
Test Plan: Updated some cover images.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15224
Summary: Fixes T10316. Fixes T10311.
Test Plan:
- Create a project, create a milestone, go back to the parent, go to the workboard. Previously, fatal. Now, prompts you to create workboard.
- Create a project, create a milestone, create the parent workboard, put a task in the milestone's column, go to the milestone workboard. Previously, fatal. Now, prompts you to create workboard.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10311, T10316
Differential Revision: https://secure.phabricator.com/D15232
Summary:
Ref T4427.
- When points are configured, show them on the task detail page (just a simple property, at least for now).
- Typecast points better to avoid "joe changed points from 12 to 12." beacuse we compare the stored value (as a string) to the new value (as a double).
Test Plan:
- Saw points on detail view.
- Created task with points, then edited it without touching points. No more spurious "changed from 12 to 12" transaction.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4427
Differential Revision: https://secure.phabricator.com/D15223
Summary:
Ref T4427.
- New config option for labels, enabling, etc., but no UI/niceness yet.
- When enabled, add a field.
- Allow nonnegative values, including fractional values.
- EditEngine is nice and Conduit / actions basically just work with a tiny bit of extra support code.
Test Plan:
- Edited points via "Edit".
- Edited points via Conduit.
- Edited points via stacked actions.
- Tried to set "zebra" points.
- Tried to set -1 points.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4427
Differential Revision: https://secure.phabricator.com/D15220
Summary:
Ref T10288.
I couldn't figure out how to reasonably get the interior right borders to round like the mock, but I think this is otherwise mostly faithful. Feel free to fix stuff.
Test Plan: {F1100415}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10288
Differential Revision: https://secure.phabricator.com/D15219
Summary:
Currently never read or written.
Supports fractions.
There's no such thing as an unsigned double so this also supports negative values, technically, although I'll eventually prevent this in the UI.
Test Plan: `bin/storage upgrade`, then created and edited a task. Nothing was different.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15218
Summary:
Before edges, we stored some of this stuff directly on tasks.
- `attached` was migrated to edges in Jan 2013.
- `projectPHIDs` was never used, as far as I can tell?
- `ccPHIDs` was migrated away and dropped more than a year ago.
None of these columns are used in modern code (instead, modern code uses edges).
Test Plan: `grep`, browsed around, `bin/storage upgrade`, unit tests.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15216
Summary:
Fixes T7410.
- Adds a "Disable Workboard" action to the "Manage Backlog" menu.
- We'll probably move this somewhere else if/when that column gets too messy.
- Disabling a board hides it, prevents it from being recreated by non-editors, and hides the "Project (Backlog)" annotations.
- Resotring a board puts it back in pristine condition.
Test Plan:
- Disabled a board.
- Verified "(Backlog)" annotations vanished.
- Enabled a board.
Reviewers: chad
Reviewed By: chad
Subscribers: mbishopim3
Maniphest Tasks: T7410
Differential Revision: https://secure.phabricator.com/D15215
Summary: Fixes T10299.
Test Plan:
- Visited `/maniphest/?projects=x` locally, where `x` is some valid project slug.
- Before patch: Fatal on `requireViewer()` call.
- After patch: Works correctly, filling the correct project into parameters.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10299
Differential Revision: https://secure.phabricator.com/D15214
Summary:
Ref T10295
* Viewing Upcoming Events in the calendar would display 'Attending: ' even if there were not attendees. This caused confusion, such as 'Is it telling me I am "Attending?"'
* When a calendar event has no attendees, simply do not display the 'Attending: ' label
Test Plan:
* Add a new event with no one attending.
* Add a new event with one or more attendees.
* View the Upcoming Events query of the Calendar app.
* Notice how the one with no attendees does not show 'Attending: ' while the other with attendees will show the already existing 'Attending: jdoe, ssmith' label.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T10295
Differential Revision: https://secure.phabricator.com/D15207
Summary:
Ref T10010.
- Viewing an empty board with milestone columns did a meaningless edge query. Don't do that.
- When creating the first milestone of a parent, force the indexing engine to rematerialize it inline. This sets `hasMilestones` properly. Otherwise, the daemons may take some time to fix this in the indexer.
Test Plan:
- Viewed an empty board of a project with a milestone.
- Viewed a normal board.
- Created the first milestone of a project with a big queue of daemons, saw project state immediately fully reflect the project having milestones.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15206
Summary: Ref T10010. Allows you to click "Milestone 99" to jump directly to that project.
Test Plan:
- Clicked milestone header, went to milestone.
- Clicked normal column header, nothing happened. Wow!
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15204
Summary: This makes small cover images full-width instead of teeny tiny dots in the middle of an island of whitespace.
Test Plan: Uploaded a small cover image.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15203
Summary: This was slightly more complex than I believed, but not too terrible.
Test Plan:
{F1096126}
- Also used some normal file uploaders to make sure I didn't break that.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15202
Summary:
No way to set photos yet, but if you magic them in they work.
Primarily, this consolidates rendering logic so the move + edit + view controllers all run the same code to do tags / cover photos.
Test Plan: {F1095870}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15201
Summary:
Ref T10010. Milestones can't have subprojects, so this item isn't very useful.
I think there is also an argument for disabling "Members", but that panel is a little less useless and explains the membership rule, so I'm less certain about removing it. I do generally lean toward removing it at some point, though.
Test Plan:
- Viewed a milestone, no "Subprojects" menu item.
- Viewed a normal project, saw item.
- Edited both menus, saw consistent UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15200
Summary:
When filling in filler projects, only select active ones.
Also use a slightly more modern method signature.
Test Plan: Disabled a project, saw it vanish from the control.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15199
Summary:
Ref T10010. Instead of autojoining projects, provide "Initial Members: [___]" that the user can fill in.
This is only available in the web UI when creating a (non-milestone) project.
Test Plan:
- Created a new project with no members.
- Created a new project with some members.
- Created a new milestone (no control).
- Created a new project with myself as a member and an "Editable By: Project Members" policy, to verify this use case still works properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15195
Summary: Show on hovercards and the profile page itself.
Test Plan: Review a Milestone.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15193
Summary: Minor, just fall back to the grey icon in all cases (too much color for me).
Test Plan: Review a Project and a Profile
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15190
Summary:
Ref T10289. This probably doesn't cover everything but should do a little bit better.
Although we should mabye just exlude milestones from this menu completely?
Test Plan: {F1093937}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10289
Differential Revision: https://secure.phabricator.com/D15191
Summary:
Fixes T10287. Ref T10286.
- Link stuff properly.
- Generally, show "Parent (Milestone)" instead of "Milestone".
- This probably doesn't get 100% of `getName()` -> `getDisplayName()` swaps, but we can get those as we catch them.
Test Plan: See T10286. Also clicked stuff.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10286, T10287
Differential Revision: https://secure.phabricator.com/D15189
Summary:
Fixes T4136.
When listing projects in the "Visible To" selector control:
- Instead of showing every project you are a member of, show only a few.
- Add an option to choose something else which isn't in the menu.
- If you've used the control before, show the stuff you've selected in the recent past.
- If you haven't used the control before or haven't used it much, show the stuff you've picked and them some filler.
- Don't offer milestones.
- Also don't offer milestones in the custom policy UI.
Test Plan:
{F1091999}
{F1092000}
- Selected a project.
- Used "find" to select a different project.
- Saw reasonable defaults.
- Saw favorites stick.
- Tried to typeahead a milestone (nope).
- Used "Custom Policy", tried to typeahead a milestone (nope).
- Used "Custom Policy" in general.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4136
Differential Revision: https://secure.phabricator.com/D15184
Summary: Fixes T10281. Adds the closed icon (resolved, dupe, ect) as an attribute and makes the text grey again.
Test Plan:
View workboard with "All Tasks"
{F1092738}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10281
Differential Revision: https://secure.phabricator.com/D15187
Summary:
Ref T10010.
- Don't allow milestones to be reordered.
- Hide phantom subproject columns when reodrering.
- Don't allow subproject/milestone columns to be renamed.
- Force milestones to be ordered at the end, and in the correct order.
- Add some missing crumbs.
Test Plan: Reordered columns, renamed columns, made a new column, viewed column details.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15183
Summary: Fixes T10275. We'd fatal on `$flex` not being defined.
Test Plan: Uninstalled badges, viewed profile. Before: fatal; now: no badges element appears but profile renders properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10275
Differential Revision: https://secure.phabricator.com/D15182
Summary: Adds which Projects a user is a member of to their profile, with a link to more. Build fallback states for no badges or no projects.
Test Plan:
Review a user with projects, without projects, with badges, without badges.
{F1084127}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15150
Summary: Ref T10010. This gets rid of, e.g., the "Iteration I" tag in the column for that milestone, as it is redundant with the column itself.
Test Plan: {F1090427}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15181
