Summary: Ref T5835. Make fund stories publish to feed and send email.
Test Plan: Made edits, etc., saw them in feed and outbound email.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5835
Differential Revision: https://secure.phabricator.com/D10677
Summary:
Ref T2787. This has some rough edges but basically works.
- Users can cancel orders that are in incomplete states (or in complete states, if the application allows them to -- for example, some future application might allow cancellation of billed-but-not-shipped orders).
- Merchant controllers can partially or fully refund orders from any state after payment.
Test Plan: This is still rough around the edges, but issued Stripe and WePay refunds.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: chad, epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10664
Summary:
Ref T2787.
- Allow merchants to disable payment providers.
- Show more useful information about providers on the payments page.
- Make test vs live more clear.
- Show merchant status.
- Add a description to merchants to flesh them out a bit -- the merchant areas of responsibilities seem to be fitting well with accounts, etc.
Test Plan: {F215109}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10662
Summary:
Ref T2787. Builds on D10649 by rebining existing objects (carts, charges, etc) to merchantPHIDs and providerPHIDs instead of an implicit global merchant and weird global artifacts (providerType / providerKey).
Basically:
- When you create something that users can pay for, you specify a merchant to control where the payment goes.
- Accounts are install-wide, but payment methods are bound to merchants. This seems to do a reasonable job of balancing usability and technical concerns.
- Replace a bunch of weird links between objects with standard PHIDs.
- Improve "add payment method" flow.
Test Plan: Went through the Fund flow with Stripe and WePay, funding an initiative.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10652
Summary:
Ref T2787. Instead of making providers global configuration, make them a thing on merchants with web configuration.
Payment methods and some of the pyament workflow needs to be retooled a bit after this, but this seemed like a reasonable cutoff point for this diff.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10649
Summary:
Ref T2787. Currently, you add payment providers (Stripe, Paypal, etc) in global configuration.
Generally, this approach is cumbersome, limiting, and often hard for users to figure out. It also doesn't provide a natural way to segment payment receivers or provide web access to administrative payment functions like issuing refunds, canceling orders, etc. I think that stuff definitely needs to be in the web UI, and the rule for access to it can't reasonably just be "all administrators" in a lot of reasonable cases.
The only real advantage is that it prevents an attacker from adjusting settings and pointing something at an account they control. But this attack can be mitigated through notifications, some sort of CLI-only merchant lock, payment accounts being relatively identifiable, etc.
So introduce "merchants", which are basically payable entities. An individual merchant will have attached Paypal, Stripe, etc., accounts, and access rules. When you buy something in an application, the merchant to pay is also specified. They also provide an umbrella for dealing with permissions down the line.
This may get a //little// cumbersome because if there are several merchants your saved card information is not shared across them. I think that will be fine in the normal case (most installs will have only one merchant). Even if it isn't and we leave providers global, I think introducing this is the right call from a web UI / permissions point of view. I'll play around with it in the next couple of diffs and figure out exactly where the line goes.
Test Plan: Listed, created, edited, viewed merchants.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10648
Summary: Ref T2787. Similar to D10634, give applications more control over the cart workflow. For now this just means they get to pick exit URIs, but in the future they can manage more details of cart behavior.
Test Plan: Funded an initiative and got returned to the initiative instead of dead-ending in Phortune.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10638
Summary: Ref T2787. `Product` is currently a fairly heavy object, but as Phortune develops it makes a lot of sense to make it a lighter object and put more product logic in applications. Convert it into a fairly lightweight reference to applications. The idea is that Phortune is mostly providing a cart flow, and applications manage the details of products.
Test Plan: Funded an initiative for $1.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10634
Summary:
Ref T2787. Phortune currently stores a bunch of stuff as `...inUSDCents`. This ends up being pretty cumbersome and I worry it will create a huge headache down the road (and possibly not that far off if we do Coinbase/Bitcoin soon). Even now, it's more of a pain than I figured it would be.
Instead:
- Provide an application-level serialization mechanism.
- Provide currency serialization.
- Store currency in an abstract way (currently, as "1.23 USD") that can handle currencies in the future.
- Change all `...inUSDCents` to `..asCurrency`.
- This generally simplifies all the application code.
- Also remove some columns which don't make sense or don't make sense anymore. Notably, `Product` is going to get more abstract and mostly be provided by applications.
Test Plan:
- Created a new product.
- Purchased a product.
- Backed an initiative.
- Ran unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10633
Summary:
Ref T4209. This creates storage for public keys against authorized hosts, such that servers can be authorized to make Conduit calls as the omnipotent user.
Servers are registered into this system by running the following command once:
```
bin/almanac register
```
NOTE: This doesn't implement authorization between servers, just the storage of public keys.
Placing this against Almanac seemed like the most sensible place, since I'm imagining in future that the `register` command will accept more information (like the hostname of the server so it can be found in the service directory).
Test Plan: Ran `bin/almanac register` and saw the host (and public key information) appear in the database.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4209
Differential Revision: https://secure.phabricator.com/D10400
Summary:
Ref T1191. Although I fixed some of the mutations earlier (in D10598), I missed the column mutations under old versions of MySQL. In particular, this isn't valid:
- `ALTER TABLE ... MODIFY columnName VARCHAR(64) COLLATE binary`
Issue the permitted version of this instead, which is:
- `ALTER TABLE ... MODIFY columnName VARBINARY(64)`
Also fixed an issue where a clean schema had the wrong nullability for a column in the draft table. Force it to the expected nullability.
The other trick here is around the one column with a FULLTEXT index on it, which needs a little massaging.
Test Plan:
- Forced my local install to return `false` for utf8mb4 support.
- Did a clean adjust into `binary` columns.
- Poked around, added emoji to things.
- Reverted the fake check and did a clean adjust into `utf8mb4` columns.
- Emoji survived.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: fabe, epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10627
Summary:
Ref T1191. Now that the whole database is covered, we don't need to do as much work to build expected schemata. Doing them database-by-database was helpful in converting, but is just reudndant work now.
Instead of requiring every application to build its Lisk objects, just build all Lisk objects.
I removed `harbormaster.lisk_counter` because it is unused.
It would be nice to autogenerate edge schemata, too, but that's a little trickier.
Test Plan: Database setup issues are all green.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, hach-que
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10620
Summary:
Ref T1191. Long ago, Maniphest generated with 40-character mail keys. These prevent the migration to `bytes20`. We had about 300 of these on secure.phabricator.com from several years ago.
Just truncate them. This adjusts reply-to addresses, but it's very likely that none are relevant anymore.
Test Plan: Ran migration on `secure.phabricator.com` to truncate keys.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10615
Summary: Ref T1191. This predates the mdoern patch stuff and may exist on very, very old installs. By the time they apply this patch, it's guaranteed it won't matter anymore. Drop it to make the schemata consistent with expectations.
Test Plan: Ran patch on installs with and without the table.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10611
Summary:
Ref T1191. Currently, the `quickstart.sql` gets generated in a pretty manual fashion. This is a pain, and will become more of a pain in the world of utf8mb4.
Provide a workflow which does upgrade + adjust + dump + destroy, then massages the output to produce a workable `quickstart.sql`.
Test Plan: Inspected output; I'll test this more throughly before actually generating a new quickstart, but that's some ways away.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10603
Summary:
Ref T1191. This destroys surplus columns:
- Pholio's transaction comments have a `mockID` column, but this is not used. The `imageID` column is used instead.
- Phragment has an unused `description` column.
- Releeph has an unused `summary` column.
Test Plan:
- Grepped for usage of these columns.
- Checked that these exist in production, too.
- Ran upgrades.
- Added Pholio inline comments.
- Saw fewer warnings.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, hach-que
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10591
Summary:
Ref T1191. Notable:
- Drops a very old saved query table. See comments inline: plan was to remove it after a year. It's been ~a year and two weeks.
- This has our only fulltext index. I'm not supporting that formally for now, but left a note.
- This has our only MyISAM table. I'm not supporting that explicitly for now, but it shouldn't affect anything. I may deal with this in the future.
- These tables don't actually write directly via Lisk, so there's some fiddling to get the schemata right.
Test Plan: Down to ~250 warnings. No more surplus databases or tables.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10589
Summary:
Ref T1191.
- Removes ponder comment table. This was migrated a very long time ago.
Test Plan:
- Grepped for removed table.
- Saw ~100 fewer issues in web UI.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10582
Summary:
Ref T1191. Notes:
- Drops the project affiliation table. This is a very old membership table which was migrated to edges.
- Drops the subproject table. This is a very old table for a removed feature.
Test Plan:
- Grepped for dropped tables.
- Saw ~100 fewer setup issues.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10581
Summary:
Ref T1191. Some notes here:
- Drops the old LDAP and OAuth info tables. These were migrated to the ExternalAccount table a very long time ago.
- Separates surplus/missing keys from other types of surplus/missing things. In the long run, my plan is to have only two notice levels:
- Error: something we can't fix (missing database, table, or column; overlong key).
- Warning: something we can fix (surplus anything, missing key, bad column type, bad key columns, bad uniqueness, bad collation or charset).
- For now, retaining three levels is helpful in generating all the expected scheamta.
Test Plan:
- Saw ~200 issues resolve, leaving ~1,300.
- Grepped for removed tables.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10580
Summary:
Ref T1191.
- This drops two tables.
- Both tables were migrated to transactions a very long time ago and no longer have readers or writers.
Test Plan: Saw ~150 fewer warnings.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10576
Summary:
Ref T1191.
- Adds support for custom fields.
- Adds support for partial indexes (indexes on a prefix of a column).
- Drops old auxiliary storage table: this was moved to custom field storage about a year ago.
- Drops old project table: this was moved to edges about two months ago.
Test Plan:
- Viewed web UI, saw fewer issues.
- Used `grep` to verify no readers/writers for storage or project table.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10526
Summary:
Ref T1191.
- There was a varchar(50) column. I changed it to `text64`, since this length is unusual.
- There was an int(3) column. I changed it to `int32`, since this length is unusual.
Test Plan: Ran migrations, saw warnings disappear from config tool.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10524
Summary: Ref T1191. This was migrated to transactions a very long time ago.
Test Plan: Ran migration, grepped, left comments in Slowvote.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10523
Summary:
Ref T1191.
- Fixes T6096. We've migrated away from this table in T4896. The data is now in the transaction table. There have been no reads or writes to this table for some time and I haven't seen any issues from users.
- Fixes T6097. Same deal as above. The data is now in the transaction comment table.
- Fixes T6100. This cache is safe to wipe out, since it's purely read-through. Wiping it will make the migration faster. The column type change fixes storage of PHP serialized objects in a text column.
Test Plan:
- Ran migrations.
- Observed some yellow go blue on the Database Status screen.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6096, T6100, T6097, T1191
Differential Revision: https://secure.phabricator.com/D10520
Summary:
Fixes T5603. Puts the toggling of locking membership into the editor so we get exceptions and all that.
I think the dialogue when you try to leave a project that is locked could be a little better maybe? Right now it just says "You can't leave" and "The membership is locked" more or less; should I surface a link to the policy stuff there too?
Test Plan:
- made a project, toggled the "lock" setting, observed stickiness and good transactions being made
- locked a project and tried to leave as a non-editor - got a dialogue letting me know i couldn't
- locked a project and tried to leave as an editor - left successfully
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5603
Differential Revision: https://secure.phabricator.com/D10508
Summary:
Fixes T6084. Changes:
- Rename `phabricator.show-beta-applications` to `phabricator.show-prototypes`, to reinforce that these include early-development applications.
- Migrate the config setting.
- Add an explicit "no support" banner to the config page.
- Rename "Beta" to "Prototype" in the UI.
- Use "bomb" icon instead of "half star" icon.
- Document prototype applications in more detail.
- Explicitly document that we do not support these applications.
Test Plan:
- Ran migration.
- Resolved "obsolete config" issue.
- Viewed config setting.
- Browsed prototypes in Applications app.
- Viewed documentation.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley, hach-que
Maniphest Tasks: T6084
Differential Revision: https://secure.phabricator.com/D10493
Summary:
Ref T5835. This is still completely made up (no payment integration), but you can "back" an initiative, type a number in the box, and generate a database row. You can then seach for backers and things you've backed and such.
Notable changes:
- Renamed "FundBacking" to "FundBacker". The former name was sort of because you can back things multiple times, but stuff like `$backings` was just too weird.
- I think that's it?
Test Plan:
- Backed an initiative.
- Viewed that I became a backer.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5835
Differential Revision: https://secure.phabricator.com/D10486
Summary:
Ref T5835. This is all pretty boilerplate, and does not interact with Phortune at all yet.
You can create "Initiatives", which have a title and description, and support most of the expected infrastructure (policies, transactions, mentions, edges, appsearch, remakrup, etc).
Only notable decisions:
- Initiatives have an explicit owner. I think it's good to have a single clearly-responsible user behind an initiative.
- I think that's it?
Test Plan:
- Created an initiative.
- Edited an initiative.
- Changed application policy defaults.
- Searched for initiatives.
- Subscribed to an initiative.
- Opened/closed an initiative.
- Used `I123` and `{I123}` in remarkup.
- Destroyed an initiative.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5835
Differential Revision: https://secure.phabricator.com/D10481
Summary: As established in D10122.
Test Plan: I basically ran `arc lint --everything --apply-patches`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10437
Summary:
Fixes T6013. Old image macros/memes never had the file edge written.
We also never wrote file edges for audio.
Finally, the meme controller didn't allow public access.
Write edges for images and audio, perform a migration to populate the historic ones, and make the Editor keep them up to date going forward.
Test Plan:
- Updated image, saw new image attach and old image detach.
- Updated audio, saw new audio attach and old audio detach.
- Ran migration.
- Viewed memes as a logged-out user.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6013
Differential Revision: https://secure.phabricator.com/D10411
Summary: Fixes T6006. These didn't get caught by D10392.
Test Plan: Forced migration to re-run; ran SSH commands against Phabricator.
Auditors: btrahan
Summary: Fixes T4881.
Test Plan: made a config change, saw the issue, restarted daemons and it went away
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4881
Differential Revision: https://secure.phabricator.com/D10339
Summary:
Ref T5932. Ref T5936. This implements build generations in Harbormaster, which provides the infrastructure required to both show users the previous states of restarted builds and to allow users to forcefully abort builds (and their targets).
You can view previous generations of a build by adding `?g=<n>` to the URI, but this isn't exposed in the UI anywhere yet.
Test Plan: Ran a build plan with a Sleep step in it. Reconfigured it for various sleep times and viewed previous generations of the build after restarting it.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5932, T5936
Differential Revision: https://secure.phabricator.com/D10321
Summary: Resolves T5895. This reduces page load times significantly when looking at builds.
Test Plan: Viewed a build, saw the page load a lot faster.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5895
Differential Revision: https://secure.phabricator.com/D10286
Summary: Ref T5884. We migrated with "canCDN" and then had live writes with "cancdn". Move everything to "canCDN" for consistency.
Test Plan: Ran migration, verified DB only has "canCDN" afterward.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5884
Differential Revision: https://secure.phabricator.com/D10273
Summary:
Fixes T2605.
- Add a setup warning about the stopword file.
- Provide a simpler stopword file.
Test Plan:
- Hit setup warning.
- Resolved it according to instructions.
- Added "various" to a task, then searched for it, found the task.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2605
Differential Revision: https://secure.phabricator.com/D10258
Summary: Ref T5819. Implements basic icon and color filtering for projects.
Test Plan: {F189350}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5819
Differential Revision: https://secure.phabricator.com/D10230
Summary:
Ref T1049. This keeps track of how long a build target takes to execute in Harbormaster and displays it in the build view page. I'm not sure whether "Started" is really that useful once the target has completed?
Also, I change the name of the time taken depending on whether or not the target has completed; if it's still in progress it's called "Elapsed" and if it's completed then it's "Duration". The primary reason for this is that "Duration" sounds like post tense, whereas "Elapsed" is current tense. I'm not sure whether this is okay or not?
Test Plan: Ran a Sleep build step and saw the target dates / times appear correctly.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: talshiri, epriestley, Korvin
Maniphest Tasks: T5824, T1049
Differential Revision: https://secure.phabricator.com/D10174
Summary:
Fixes T5840. Some time ago I incorrectly believed that `latin1_bin` collation was synonymous with "binary". It is not, and does not permit UTF8 characters outside of BMP, among other sequences.
These two tables currently have `LONGTEXT` columns which should be `LONGBLOB`. The table design is explicilty intended to accommodate invalid/unreasonably long ref names, but the collation prevents this from working properly.
After T1191, we'll have a general system for resolving this, but a user hit an issue yesterday (T5840) with a brnach name containing Chinese characters.
Test Plan:
- Tried emoji inserts into both tables, was rebuffed.
- Ran migration.
- Performed emoji inserts into both tables.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5840
Differential Revision: https://secure.phabricator.com/D10217
Summary:
Fixes T5677.
- Instead of using `sequence == 0` to mean "this is the backlog column", flag the column explicitly.
- Migrate existing sequence 0 columns to have the flag.
- Add the flag when initializing or copying a board.
- Remove special backlog logic when reordering columns.
Test Plan:
- Migrated columns, viewed some boards, they looked identical.
- Reordered the backlog column a bunch of times (first, last, middle, dragged other stuff around).
- Added tasks to a project, saw them show up in the reordered backlog.
- Initialized a new board and saw a backlog column show up.
- Copied an existing board and saw the backlog column come over.
- Tried to hide a backlog column.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5677
Differential Revision: https://secure.phabricator.com/D10189
Summary:
Fixes T5476. Using edges to store which objects are on which board columns ends up being pretty awkward. In particular, it makes T4807 very difficult to implement.
Introduce a dedicated `BoardColumnPosition` storage.
This doesn't affect ordering rules (T4807) yet: boards are still arranged by priority. We just read which tasks are on which columns out of a new table.
Test Plan:
- Migrated data, then viewed some boards. Saw exactly the same data.
- Dragged tasks from column to column.
- Created a task directly into a column.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5476
Differential Revision: https://secure.phabricator.com/D10160
Summary:
Ref T4896. Currently, subscriptions to commits are stored as auditors with a special "CC" type.
Instead, use normal subscriptions storage, reads and writes.
Test Plan:
- Ran migration and verified data still looked good.
- Viewed commits in UI and saw "subscribers".
- Saw "Automatically Subscribed", clicked Subscribe/Unsubscribe on a non-authored commit, saw subscriptions update.
- Pushed a commit through Herald rules and saw them trigger subscriptions and auditors.
- Used "Add CCs".
- Added CCs with mentions.
Reviewers: btrahan, joshuaspence
Reviewed By: btrahan, joshuaspence
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10103
Summary:
Ref T1049. This uses tabs on build targets to hide the configuration details and variables by default, instead promoting the target name, it's status and a description of the build step. The description is a new field on each build step.
The primary advantage of having a description on build steps is that DevOps can configure appropriate description information (including any troubleshooting information for build failures) on build steps, and developers who have builds fail against their code review can then look at this information.
Test Plan: Viewed a build plan and saw the appropriate information.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D10093
Summary:
Depends on D9806. This implements the build simulator, which is used to calculate the order of build steps in the plan editor. This includes a migration script to convert existing plans from sequential based to dependency based, and then drops the sequence column.
Because build plans are now dependency based, the grippable and re-order behaviour has been removed.
Test Plan: Tested the migration, saw the dependencies appear correctly.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9847
Summary:
Ref T4896. Depends on D10052. This is the major/scary migration, but not really so bad. It is substantially similar to D8210, but less complex because there are fewer actions here.
This moves `PhabricatorAuditComment` storage to `PhabricatorAuditTransaction`, then reads `PhabricatorAuditComment`s as a proxy around the new objects.
Test Plan:
- Before migrating, browsed around. Nothing appeared broken.
- Migrated cleanly.
- Viewed old transactions (inlines, comments, accept/reject/etc, add auditors, add ccs, implicit CCs).
- Added all of those comment types.
- Edited a draft.
- Deleted a draft.
- Spot checked the database for sanity.
Reviewers: btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10055
Summary:
Ref T4896. This is substantially similar to D8196.
Migrate the comment text out of the `audit_comment` table and into the `audit_transaction_comment` table. Do double reads on `PhabricatorAuditComment` so the APIs aren't disturbed. The old table is still updated.
Test Plan:
- Before applying migration, cleared cache and browsed around. Things looked fine, except no comment text.
- Applied migration.
- Cleared cache, browsed around, saw all my old comments.
- Added some new comments.
- Spot checked migrated and new rows in database.
Reviewers: btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10020
Summary:
Ref T4896. This is substantially identical to the process which Differential followed, and mostly copied from the original Differential migration and the Differential proxy object.
Basically, we move all the data over but the application can't tell, and the same APIs do reads and writes to the new table.
Test Plan:
- Browsed UI before migrating, everything looked fine (but no inlines).
- Ran migration.
- Verified draft and published comments survived migration.
- Added a draft.
- Previewed draft.
- Submitted draft.
- Viewed standalone with drafts and published comments.
- Sanity checked data in database, didn't see anything unusual.
Reviewers: btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10018
Summary:
Ref T4896. This adds the new storage, without any code changes.
This storage is substantially identical to the Differential storage, except that `changesetID` has been replaced by `pathID`.
I've retained the properties intended to be used to implement T1460. They might not be quite right, but at least we'll be able to make any fixes consistently to both applications. For now, these fields are empty and ignored.
Test Plan: Ran `./bin/storage upgrade`. Nothing calls this code yet.
Reviewers: btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10017
Summary: Ref T5655. Rename `PhabricatorPHIDType` subclasses for clarity (see discussion in D9839). I'm not too keen on some of the resulting class names, so feel free to suggest alternatives.
Test Plan: Ran unit tests.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin, hach-que
Maniphest Tasks: T5655
Differential Revision: https://secure.phabricator.com/D9986
Summary:
Ref T2787. Carts need a status so we can tell if they've been purchased. Also kind of get WePay working as a one-time provider, and let charges not have a methodPHID (they won't for one-time providers).
All the status stuff is still super crazy rough and you can do things like start a checkout, add a bunch of stuff to your cart, complete the checkout, and have Phabricator think you paid for all the stuff you added. But this is fine for now since you can't actually edit carts, and also none of this is at all usable anyway. I'll refine some of the workflows in future diffs, for now I'm just getting things hooked up and technically working.
Test Plan:
- Purcahsed a cart and got a sort of status/done screen instead of a "your money is gone" exception.
- Went through the WePay flow and got a successful test checkout.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10003
Summary: Ref T2787. Makes charges a real object, allows providers to apply them. We are now (just barely) capable of stealing users' money.
Test Plan: {F179584}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10002
Summary:
Ref T2787. Make carts and purchases real objects, with storage, that kind-of work.
Roughly, the idea here is that applications create "purchases" (like "1 large t-shirt") and add them to "carts" (a user can have a lot of different carts at the same time), then hand things off to Phortune to deal with actualy charging a card. Roughly this works like Paypal or other similar systems do, except Phortune is the thing the user gets handed off to.
This doesn't do anything interesting/useful yet.
Also fix some bugs and update some UI.
Test Plan: Added a product to a cart, saw it in cart screen.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10001
Summary: The old class name isn't quite correct.
I'm just updating the migration rather than adding a new one to fix it since
this was very recently introduced and affects only installs using Asana auth,
so it's realistic that the number of affected installs might be 0.
Affected installs can use `--apply` to safely rerun the migration.
Auditors: joshuaspence
Summary: Add a missing migration which should have been included in D9982. Harbormaster and Herald PHIDs are used as actors in some transactions.
Test Plan: Ran `./bin/storage upgrade`. Saw a transaction render correctly as "Herald assigned this task to alincoln" instead of "Unknown Object (Application) assigned this task to alincoln".
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10028
Summary: Ref T5655. Some discussion in D9839. Generally speaking, `Phabricator{$name}Application` is clearer than `PhabricatorApplication{$name}`.
Test Plan:
# Pinned and uninstalled some applications.
# Applied patch and performed migrations.
# Verified that the pinned applications were still pinned and that the uninstalled applications were still uninstalled.
# Performed a sanity check on the database contents.
Reviewers: btrahan, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: hach-que, epriestley, Korvin
Maniphest Tasks: T5655
Differential Revision: https://secure.phabricator.com/D9982
Summary: This migration script is required for D9999, which has already landed.
Test Plan: Ran `./bin/storage upgrade` and can log in again.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10010
Summary:
Fixes T5614. Ref T4420. Other than the "users" datasource and a couple of others, many datasources ignore what the user typed and just return all results, then rely on the client to filter them.
This works fine for rarely used ("legalpad documents") or always small ("task priorities", "applications") datasets, but is something we should graudally move away from as datasets get larger.
Add a token table to projects, populate it, and use it to drive the datasource query. Additionally, expose it on the applicationsearch UI.
Test Plan:
- Ran migration.
- Manually checked the table.
- Searched for projects by name from ApplicationSearch.
- Searched for projects by name from typeahead.
- Manually checked the typeahead response.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5614, T4420
Differential Revision: https://secure.phabricator.com/D9896
Summary: Ref T5245. This moves the actual storage over and stops reads and writes to the old table.
Test Plan:
- Verified tasks retained projects across the migration.
- Added and removed projects from tasks.
- Searched for: all, any, users' projects, not-in-projects, no-projects.
Reviewers: chad, btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T5245
Differential Revision: https://secure.phabricator.com/D9850
Summary:
Ref T5245. These were a bad idea.
We no longer need actors for edge edits either, so remove those. Generally, edges have fit into the policy model as pure/low-level infrastructure, and they do not have any policy or capability information in and of themselves.
Test Plan: `grep`
Reviewers: chad, btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T5245
Differential Revision: https://secure.phabricator.com/D9840
Summary:
Ref T5245. See some discussion in D9838.
When we attach object A to object B, we'd like to write transactions on both sides but only write the actual edges once.
To do this, allow edge types to `shouldWriteInverseTransactions()`. When an edge type opts into this, have editors apply the inverse transactions before writing the edge. These inverse transactions don't actually apply effects, they just show up in the transaction log.
Test Plan: Attached and detached revisions from tasks, saw transactions appear on both sides of the operation.
Reviewers: chad, btrahan, joshuaspence
Reviewed By: btrahan, joshuaspence
Subscribers: epriestley
Maniphest Tasks: T5245
Differential Revision: https://secure.phabricator.com/D9839
Summary: Fixes T5611. We don't need sequences to be unique, and it makes it a pain to update them.
Test Plan: Dragged some columns around.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5611
Differential Revision: https://secure.phabricator.com/D9914
Summary: Fixes T5336. Currently, `PhabricatorWorkerLeaseQuery` is basically FIFO. It makes more sense for the queue to be a priority-queue, and to assign higher priorities to alerts (email and SMS).
Test Plan: Created dummy tasks in the queue (with different priorities). Verified that the priority field was set correctly in the DB and that the priority was shown on the `/daemon/` page. Started a `PhabricatorTaskmasterDaemon` and verified that the higher priority tasks were executed before lower priority tasks.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5336
Differential Revision: https://secure.phabricator.com/D9871
Summary:
Fixes T5532. Allow documents to have a preamble in the header which can be used to explain who should sign a document and why.
Particularly, I plan to use this to navigate the corporate vs individual stuff more sensibly.
Test Plan: {F174228}
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5532
Differential Revision: https://secure.phabricator.com/D9819
Summary: Ref T1049. This provides a user-configurable name field on build steps, which allows users to uniquely identify their steps. The intention is that this field will be used in D9806 to better identify the dependencies (rather than showing an unhelpful PHID).
Test Plan: Set the name of some build steps, saw it appear in the correct places.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D9816
Summary:
Ref T5532. This adds:
- Documents can designate that they should be signed by "Corporations" or "Individuals".
- Corporate documents get different fields and a different exemption process.
- Basically everything works the same but this is like a zillion lines of form code.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5532
Differential Revision: https://secure.phabricator.com/D9812
Summary:
Ref T5532. Allow document managers to add exemptions, which act like signatures but are tracked a little differently.
The primary use case for us is users who sign a corporate CLA and need a user-level exemption if they don't want to sign an individual CLA.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5532
Differential Revision: https://secure.phabricator.com/D9795
Summary: Ref T5471. Adds an archived state for panels. Archived panels don't show up in the default query view or in the "Add Existing Panel" workflow.
Test Plan:
- Archived a panel.
- Activated a panel.
- Viewed / searched for archived/active panels.
- Popped "Add Existing Panel" dropdown and saw it omit archived panels.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5471
Differential Revision: https://secure.phabricator.com/D9779
Summary:
Ref T3116. In the case of anonymous signers, there's no way to do a quick way to check if someone has signed a doc since you can't query by their (nonexistent) external account ID.
Move "name" and "email" to first-class columns and let the engine search for them.
Test Plan: Searched for signatures with name and email fragments.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T3116
Differential Revision: https://secure.phabricator.com/D9776
Summary: This further helps differentiate types/roles for projects.
Test Plan: {F169758}
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9710
Summary: Ref T2222. See D8355. I'll hold this for a while.
Test Plan: Ran migration.
Reviewers: chad, btrahan
Reviewed By: chad
Subscribers: epriestley, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8356
Summary: Ref T2222. I'll hold this, but there are no more reads or writes from/to this table in the application.
Test Plan: Grepped for usage, ran migration, browsed around.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8203
Summary:
Ref T4209. Unifies the local (`./bin/phd status`) and global (`./bin/phd status --all`) view into a single table. This generally makes it easy to administer daemons running across multiple hosts.
Depends on D9606.
Test Plan:
```
> sudo ./bin/phd status
ID Host PID Started Daemon Arguments
38 localhost 2282 Jun 18 2014, 7:52:56 AM PhabricatorRepositoryPullLocalDaemon
39 localhost 2289 Jun 18 2014, 7:52:57 AM PhabricatorGarbageCollectorDaemon
40 localhost 2294 Jun 18 2014, 7:52:57 AM PhabricatorTaskmasterDaemon
41 localhost 2314 Jun 18 2014, 7:52:58 AM PhabricatorTaskmasterDaemon
42 localhost 2319 Jun 18 2014, 7:52:59 AM PhabricatorTaskmasterDaemon
43 localhost 2328 Jun 18 2014, 7:53:00 AM PhabricatorTaskmasterDaemon
44 localhost 2354 Jun 18 2014, 7:53:08 AM PhabricatorRepositoryPullLocalDaemon X --not Y
```
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4209
Differential Revision: https://secure.phabricator.com/D9607
Summary:
We already have GC for daemon log events, but not for daemon logs themselves.
Collect old daemon logs which aren't still running.
Test Plan: Ran `phd debug garbage`, observed old logs get cleaned up. Started some daemons, re-ran garbage, made sure they stuck around.
Reviewers: joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9610
Summary:
Ref T4566. Currently, mocks have a conservative (author only), immutable default edit policy.
Instead:
- Let the edit policy be changed.
- Default the edit policy to "all users", similar to other applications.
- Add an application-level setting for it.
- Migrate existing edit policies to be consistent with the old policy (just the author).
This stops short of adding a separate "owner" and letting that be changed, since Pholio doesn't really have any review/approve type features (at least, so far). We can look at doing this if we get more feedback about it, or if we make owners more meaningful (e.g., add more "review-like" process to mocks).
Test Plan:
- Ran migration scripts.
- Confirmed existing mocks retained their effective policies (author only).
- Created a new mock, saw edit policy.
- Changed edit policy.
- Changed global edit policy default.
- Tried to edit a mock I couldn't edit.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T4566
Differential Revision: https://secure.phabricator.com/D9550
Summary: Applied some more linter fixes that I previously missed because my global `arc` install was out-of-date.
Test Plan: Will run `arc unit` on another host.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9443
Summary: Ran `arc lint --apply-patches --everything` over rP, mainly to change double quotes to single quotes where appropriate. These changes also validate that the `ArcanistXHPASTLinter::LINT_DOUBLE_QUOTE` rule is working as expected.
Test Plan: Eyeballed it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9431
Summary:
Ref T4045. Ref T5179. Hunk storage has two major issues:
- It's utf8, but actual diffs are binary.
- It's huge and can't be compressed or archived.
This introduces a second datastore which solves these problems: by recording hunk encoding, supporting compression, and supporting alternate storage. There's no actual compression or storage support yet, but there's space in the table for them.
Since nothing actually uses hunk IDs, it's fine to have these tables exist at the same time and use the same IDs. We can migrate data between the tables gradually without requiring downtime or disrupting installs.
Test Plan:
- There are no writes to the new table yet.
- The only effect this has is making us issue one extra query when looking for hunks.
- Observed the query issue, but everything else continue working fine.
- Created a new diff.
- Ran unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4045, T5179
Differential Revision: https://secure.phabricator.com/D9290
Summary: Ref T5089. Adds a `security.require-multi-factor-auth` which forces all users to enroll in MFA before they can use their accounts.
Test Plan:
Config:
{F159750}
Roadblock:
{F159748}
After configuration:
{F159749}
- Required MFA, got roadblocked, added MFA, got unblocked.
- Removed MFA, got blocked again.
- Used `bin/auth strip` to strip MFA, got blocked.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5089
Differential Revision: https://secure.phabricator.com/D9285
Summary: Point everything at the new canonical URI.
Test Plan: `grep`
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9328
Summary: Fixes T5090. Introduced getIcon into Handle stack which allows you to specify a per handle icon. getIcon falls back ot getTypeIcon.
Test Plan: changed the icon on a project a bunch. verified transactions showed up. verified icon showed up in typeahead. verified icon showed up in tokens that were pre-generated (not typed in). units test passed.
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5090
Differential Revision: https://secure.phabricator.com/D9264
Summary:
Fixes T4021. Chooses to keep a "primary" slug based off the name - including all that lovely logic - and allow the user to specify "additional" slugs. Expose these as "hashtags" to the user.
Sets us up for a fun diff where we can delete all the Project => Phriction automagicalness. In terms of this diff, see the TODOs i added.
Test Plan:
added a primary slug as an additional slug - got an error. added a slug in use on another project - got an error. added multiple good slugs and they worked. removed slugs and it worked. made some remark using multiple new slugs and they all linked to the correct project
ran epriestley's case
- Create project "A".
- Give it additional slug "B".
- Try to create project "B".
and i got a nice error about hashtag collision
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4021
Differential Revision: https://secure.phabricator.com/D9250
Summary:
Ref T4398. We have several auth-related systems which require (or are improved by) the ability to hand out one-time codes which expire after a short period of time.
In particular, these are:
- SMS multi-factor: we need to be able to hand out one-time codes for this in order to prove the user has the phone.
- Password reset emails: we use a time-based rotating token right now, but we could improve this with a one-time token, so once you reset your password the link is dead.
- TOTP auth: we don't need to verify/invalidate keys, but can improve security by doing so.
This adds a generic one-time code storage table, and strengthens the TOTP enrollment process by using it. Specifically, you can no longer edit the enrollment form (the one with a QR code) to force your own key as the TOTP key: only keys Phabricator generated are accepted. This has no practical security impact, but generally helps raise the barrier potential attackers face.
Followup changes will use this for reset emails, then implement SMS multi-factor.
Test Plan:
- Enrolled in TOTP multi-factor auth.
- Submitted an error in the form, saw the same key presented.
- Edited the form with web tools to provide a different key, saw it reject and the server generate an alternate.
- Change the expiration to 5 seconds instead of 1 hour, submitted the form over and over again, saw it cycle the key after 5 seconds.
- Looked at the database and saw the tokens I expected.
- Ran the GC and saw all the 5-second expiry tokens get cleaned up.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D9217
Summary:
See title. Adds PhabricatorDashboardInstall data object which scopes installs to objectPHID + applicationClass. This is because we already have a collision for user home pages and user profiles. Assume only one dashboard per objectPHID + applicationClass though at the database level.
Fixes T5076.
Test Plan: From dashboard view, installed a dashboard - success! Went back to dashboard view and uninstalled it!
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5076
Differential Revision: https://secure.phabricator.com/D9206
Summary: Fixes T4299, Add status dropdown to mock edit view
Test Plan: Edit mock, close mock, thumbnail title should read (Disabled). Default mocks list should show only open mocks.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: chad, epriestley, Korvin
Maniphest Tasks: T4299
Differential Revision: https://secure.phabricator.com/D9145
Summary:
Fixes T4898. After we increased the strictness of the `%s` conversion, most `serialize()` output is rejected from the cache.
Drop the cache, change the column type to latin1_bin, and then use `%B` to mark the data as binary during query construction.
Test Plan: Viewed Differential, saw cache fills.
Reviewers: btrahan, spicyj
Reviewed By: spicyj
Subscribers: epriestley
Maniphest Tasks: T4898
Differential Revision: https://secure.phabricator.com/D9171
Summary:
Ref T4994. This stuff works:
- You can dump a blob of coverage information into `diffusion.updatecoverage`. This wipes existing coverage information and replaces it.
- It shows up when viewing files.
- It shows up when viewing commits.
This stuff does not work:
- When viewing files, the Javascript hover interaction isn't tied in yet.
- We always show this information, even if you're behind the commit where it was generated.
- You can't do incremental updates.
- There's no aggregation at the file (this file has 90% coverage), diff (the changes in this commit are 90% covered), or directory (the code in this directory has 90% coverage) levels yet.
- This is probably not the final form of the UI, storage, or API, so you should expect occasional changes over time. I've marked the method as "Unstable" for now.
Test Plan:
- Ran `save_lint.php` to check for collateral damage; it worked fine.
- Ran `save_lint.php` on a new branch to check creation.
- Published some fake coverage information.
- Viewed an affected commit.
- Viewed an affected file.
{F151915}
{F151916}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: jhurwitz, epriestley, zeeg
Maniphest Tasks: T5044, T4994
Differential Revision: https://secure.phabricator.com/D9022
Summary: This is useful when you're trying to onboard an entire office and you end up using the Google OAuth anyway.
Test Plan: tested locally. Maybe I should write some tests?
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9150
Summary:
This gets us the ability to specify a "layout mode" and which column a panel should appear in at panel add time. Changing the layout mode from a multi column view to a single column view or vice versa will reset all panels to the left most column.
You can also drag and drop where columns appear via the "arrange" mode.
We also have a new dashboard create flow. Create dashboard -> arrange mode. (As opposed to view mode.) This could all possibly use massaging.
Fixes T4996.
Test Plan:
made a dashboard with panels in multiple columns. verified correct widths for various layout modes
re-arranged collumns like whoa.
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4996
Differential Revision: https://secure.phabricator.com/D9031
Summary:
Create transaction, editor, etc, and move command generation over to editor.
Show in a timeline in the buildable page.
Also prevent Engine from creating an empty transaction when build starts (Fixes T4885).
Fixes T4886.
Test Plan: Restart builds and buildables, look at timeline.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4885, T4886
Differential Revision: https://secure.phabricator.com/D9110
Summary: Fixes T5035. This migration isn't forward compatible after schema mutation.
Test Plan: Ran locally, will get reporting user to confirm.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: gera, epriestley
Maniphest Tasks: T5035
Differential Revision: https://secure.phabricator.com/D9101
Summary:
Ref T4455. This adds a `repository_parents` table which stores `<childCommitID, parentCommitID>` relationships.
For new commits, it is populated when commits are discovered.
For older commits, there's a `bin/repository parents` script to rebuild the data.
Right now, there's no UI suggestion that you should run the script. I haven't come up with a super clean way to do this, and this table will only improve performance for now, so it's not important that we get everyone to run the script right away. I'm just leaving it for the moment, and we can figure out how to tell admins to run it later.
The ultimate goal is to solve T2683, but solving T4455 gets us some stuff anyway (for example, we can serve `diffusion.commitparentsquery` faster out of this cache).
Test Plan:
- Used `bin/repository discover` to discover new commits in Git, SVN and Mercurial repositories.
- Used `bin/repository parents` to rebuild Git and Mercurial repositories (SVN repos just exit with a message).
- Verified that the table appears to be sensible.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: jhurwitz, epriestley
Maniphest Tasks: T4455
Differential Revision: https://secure.phabricator.com/D9044
Summary:
Provides a working SMS implementation with support for Twilio.
This version doesn't really retry if we get any gruff at all. Future versions should retry.
Test Plan: used bin/sms to send messages and look at them.
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: aurelijus, epriestley, Korvin
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D8930
Summary: Fixes T4928. I'm not sure how this column was missing, but this patch can't hurt.
Test Plan: Reasoned about behavior.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4928
Differential Revision: https://secure.phabricator.com/D8967
Summary: Fixes T4931. Each new credential should come with the ability to lock the credential permanently, so that no one can ever edit again. Each existing credential must allow user to lock existing credential.
Test Plan: Create new credential, verify that you can lock it before saving it. Open existing unlocked credential, verify that option to lock it exists. Once credential is locked, the option to reveal it should be disabled, and editing the credential won't allow username/password updates.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4931
Differential Revision: https://secure.phabricator.com/D8947
Summary:
Ref T4749. Ref T3265. Ref T4909. Several goals here:
- Move user destruction to the CLI to limit the power of rogue admins.
- Start consolidating all "destroy named object" scripts into a single UI, to make it easier to know how to destroy things.
- Structure object destruction so we can do a better and more automatic job of cleaning up transactions, edges, search indexes, etc.
- Log when we destroy objects so there's a record if data goes missing.
Test Plan: Used `bin/remove destroy` to destroy several users.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3265, T4749, T4909
Differential Revision: https://secure.phabricator.com/D8940
Summary:
Ref T4398. This prompts users for multi-factor auth on login.
Roughly, this introduces the idea of "partial" sessions, which we haven't finished constructing yet. In practice, this means the session has made it through primary auth but not through multi-factor auth. Add a workflow for bringing a partial session up to a full one.
Test Plan:
- Used Conduit.
- Logged in as multi-factor user.
- Logged in as no-factor user.
- Tried to do non-login-things with a partial session.
- Reviewed account activity logs.
{F149295}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8922
Summary:
Ref T3583. Adds edges, query relationships, etc. Lots of debugging/temporary UI.
My general intent here is to use edges to track where panels appear, and then put additional data on the dashboard itself to control layout, positioning, etc.
Dashboards don't actually render yet so this is still pretty boring.
Test Plan:
{F149175}
{F149176}
{F149177}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3583
Differential Revision: https://secure.phabricator.com/D8916
Summary: Ref T3583. These will be the primary class carrying panel implementations.
Test Plan:
{F149125}
{F149126}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3583
Differential Revision: https://secure.phabricator.com/D8912
Summary:
Ref T4398. This is still pretty rough and isn't exposed in the UI yet, but basically works. Some missing features / areas for improvement:
- Rate limiting attempts (see TODO).
- Marking tokens used after they're used once (see TODO), maybe. I can't think of ways an attacker could capture a token without also capturing a session, offhand.
- Actually turning this on (see TODO).
- This workflow is pretty wordy. It would be nice to calm it down a bit.
- But also add more help/context to help users figure out what's going on here, I think it's not very obvious if you don't already know what "TOTP" is.
- Add admin tool to strip auth factors off an account ("Help, I lost my phone and can't log in!").
- Add admin tool to show users who don't have multi-factor auth? (so you can pester them)
- Generate QR codes to make the transfer process easier (they're fairly complicated).
- Make the "entering hi-sec" workflow actually check for auth factors and use them correctly.
- Turn this on so users can use it.
- Adding SMS as an option would be nice eventually.
- Adding "password" as an option, maybe? TOTP feels fairly good to me.
I'll post a couple of screens...
Test Plan:
- Added TOTP token with Google Authenticator.
- Added TOTP token with Authy.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8875
Summary:
Ref T4398. This is roughly a "sudo" mode, like GitHub has for accessing SSH keys, or Facebook has for managing credit cards. GitHub actually calls theirs "sudo" mode, but I think that's too technical for big parts of our audience. I've gone with "high security mode".
This doesn't actually get exposed in the UI yet (and we don't have any meaningful auth factors to prompt the user for) but the workflow works overall. I'll go through it in a comment, since I need to arrange some screenshots.
Test Plan: See guided walkthrough.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8851
Summary: Fixes T3566 List of poll actions should include ability to close an open poll or reopen a closed poll.
Test Plan: Poll author should be able to close/reopen poll. Non-author should get policy screen when attempting to close/reopen poll.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T3566
Differential Revision: https://secure.phabricator.com/D8846
Summary: Going to sit on this for a bit so we can fall back to it if needbe, but this table no longer has any reads or writes in the application.
Test Plan: Applied patch locally and poked around.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: aran
Differential Revision: https://secure.phabricator.com/D8190
Summary:
Ref T3551. Currently, ReleephRequests don't have a direct concept of the //object// being requested. You can request `D123`, but that is just a convenient way to write `rXyyyy`.
When the UI wants to display information about a revision, it deduces it by examining the commit.
This is primarily an attack on T3551, so we don't need to load <commit -> edge -> revision> (in an ad-hoc way) to get revisions. Instead, when you request a revision we keep track of it and can load it directly later.
Later, this will let us do more things: for example, if you request a branch, we can automatically update the commits (as GitHub does), etc. (Repository branches will need PHIDs first, of course.)
This adds and populates the column but doesn't use it yet. The second part of the migration could safely be run while Phabricator is up, although even for Facebook this table is probably quite small.
Test Plan:
- Ran migration.
- Verified existing requests associated sensibly.
- Created a new commit request.
- Created a new revision request.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3551
Differential Revision: https://secure.phabricator.com/D8822
Summary:
Ref T4809. Buildables currently have buildStatus and buildableStatus. Neither are used, and no one knows why we have two.
I'm going to use buildableStatus shortly, but buildStatus is meaningless; burn it.
Test Plan: `grep`, examined similar get/set calls, created a new buildable, ran storage upgrade.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4809
Differential Revision: https://secure.phabricator.com/D8796
Summary:
When we generate account tokens for CSRF keys and email verification, one of the inputs we use is the user's password hash. Users won't always have a password hash, so this is a weak input to key generation. This also couples CSRF weirdly with auth concerns.
Instead, give users a dedicated secret for use in token generation which is used only for this purpose.
Test Plan:
- Ran upgrade scripts.
- Verified all users got new secrets.
- Created a new user.
- Verified they got a secret.
- Submitted CSRF'd forms, they worked.
- Adjusted the CSRF token and submitted CSRF'd forms, verified they don't work.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8748
Summary: Fixes T3208. This forces us to bind+search even if there are no anonymous credentials.
Test Plan: Checked the box, saved the form. Unchecked the box, saved the form. LDAP??
Reviewers: Firehed
Reviewed By: Firehed
Subscribers: epriestley
Maniphest Tasks: T3208
Differential Revision: https://secure.phabricator.com/D8723
Summary:
This adds a system which basically keeps a record of recent actions, who took them, and how many "points" they were worth, like:
epriestley email.add 1 1233989813
epriestley email.add 1 1234298239
epriestley email.add 1 1238293981
We can use this to rate-limit actions by examining how many actions the user has taken in the past hour (i.e., their total score) and comparing that to an allowed limit.
One major thing I want to use this for is to limit the amount of error email we'll send to an email address. A big concern I have with sending more error email is that we'll end up in loops. We have some protections against this in headers already, but hard-limiting the system so it won't send more than a few errors to a particular address per hour should provide a reasonable secondary layer of protection.
This use case (where the "actor" needs to be an email address) is why the table uses strings + hashes instead of PHIDs. For external users, it might be appropriate to rate limit by cookies or IPs, too.
To prove it works, I rate limited adding email addresses. This is a very, very low-risk security thing where a user with an account can enumerate addresses (by checking if they get an error) and sort of spam/annoy people (by adding their address over and over again). Limiting them to 6 actions / hour should satisfy all real users while preventing these behaviors.
Test Plan:
This dialog is uggos but I'll fix that in a sec:
{F137406}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8683
Summary: Fixes T4703. This is a VARCHAR(255) for no particular reason.
Test Plan: {F136160}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T4703
Differential Revision: https://secure.phabricator.com/D8652
Summary: Ref T3549. This table isn't written to yet; rename it and the DAOs and modernize the history controller.
Test Plan: Viewed history page for a product.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3549
Differential Revision: https://secure.phabricator.com/D8633
Summary: followup to D8544. This ends up creating an editor + transactions to get the job done.
Test Plan: made a column - saw a nice created transaction. edited the name - saw a nice name edit. deleted the column - saw a deleted transaction, updated "deleted" ui, and hte action change to activate. "Activated" the column and saw a transaction and updated UI. Tried to delete a column with tasks in it and got an error.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8620
Summary:
During migration of very old installs, this script no longer runs properly since at HEAD it can't index against older schemas.
Since it's pretty fluff, just toss it. Installs can run `bin/search index --type PROJ` after finishing migrations to achieve the same effect, if necessary.
Test Plan: eyeballed it
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8619
Summary:
Ref T4677. Currently, we record individual actions in a push as PhabricatorRepositoryPushLogs, but tie them together only loosely with a `transactionKey`.
Provide a real PushEvent object, and move some of the denormalized fields to it. This primarily just gives us more robust infrastructure for building, e.g., email about pushes, for T4677, since we can act on real PHIDs rather than passing awkward identifiers around.
Test Plan:
- Performed migration.
- Looked at database for consistency.
- Browsed/queried push logs.
- Pushed a bunch of stuff.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4677
Differential Revision: https://secure.phabricator.com/D8615
Summary:
Ref T1049. Allows external systems to send a message to a build target. The primary intended use case is:
- You make an HTTP request to Jenkins.
- The build goes into a "waiting" state.
- Later, Jenkins calls `harbormaster.sendmessage` to report that the target passed or failed.
- The build continues as appropriate.
This is deceptively complicated because:
- There are a lot of race concerns. We might get a message back from an external system before it even responds to the request we made. We want to make sure we process these messages no matter when we receive them.
- These messages need to be sent to a build target (vs a build or buildable) because we'll get into trouble with parallelization later on otherwise (Jenkins is told to do 3 builds; we can't tell which ones failed or what overall state is unless the message are sent to targets).
- I initially thought about implementing this as a separate "Wait for a response from an external system" build step. This gets a lot more complicated for users once we do parallelization, though. Particularly, in the case where you've told Jenkins to do 3 builds, the three "wait" steps need to know which target they're waiting for (and jenkins needs to know some unique identifier for each target). So this pretty much boils down to a more complicated, more error-prone version of using target PHIDs.
This makes the already-muddy Build UI a bit worse, but it needs a general clarity pass anyway (it's showing way too much uninteresting data, and should show a better summary of results instead).
Test Plan:
- This doesn't really do anything interesting yet.
- Used Conduit to send messages to build plans.
- Viewed the messages on the build screen.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D8604
Summary: Ref T1049. For consistency, rename these to "Harbormaster...".
Test Plan: Ran migration, ran builds, everything still works fine.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D8602
Summary:
Ref T1049. Fixes T4602. Moves all the funky field stuff to CustomField. Uses ApplicationTransactions to apply and record edits.
This makes "artifact" fields a little less nice (but still perfectly usable). With D8599, I think they're reasonable overall. We can improve this in the future.
All other field types are better (e.g., fixes weird bugs with "bool", fixes lots of weird behavior around required fields), and this gives us access to many new field types.
Test Plan:
Made a bunch of step edits. Here's an example:
{F133694}
Note that:
- "Required" fields work correctly.
- the transaction record is shown at the bottom of the page.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4602, T1049
Differential Revision: https://secure.phabricator.com/D8600
Summary:
Ref T1812. I think integer constants are going to be confusing and error prone for users to interact with. For example, because we use 0-5, adding a second "open" status like "needs verification" without disrupting the existing statuses would require users to define a status with, e.g., constant `6`, but order it between constants `0` and `1`. And if they later remove statuses, they need to avoid reusing existing constants.
Instead, use more manageable string constants like "open", "resolved", etc.
We must migrate three tables:
- The task table itself, to update task status.
- The transaction table, to update historic status changes.
- The saved query table, to update saved queries which specify status sets.
Test Plan:
- Saved a query with complicated status filters.
- Ran migrations.
- Looked at the query, at existing tasks, and at task transactions.
- Forced migrations to run again to verify idempotentcy/safety.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1812
Differential Revision: https://secure.phabricator.com/D8583
Summary: Fixes T4408. I had to add a "status" to colum. I think we'll need this once we get fancier anyway but for now we have "active" and deleted.
Test Plan: deleted a column. noted reloaded workboard with all those tasks back in the default colun. loaded a task and saw the initial transaction had a "Disabled" icon next to the deleted workboard. also saw the new transaction back to the default column worked.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4408
Differential Revision: https://secure.phabricator.com/D8544
Summary:
Fixes T4637.
- We already allow you to order by this column but don't have a key on it. Add one.
- Expose UI for querying on ranges.
Test Plan:
- Ran some queries, got reasonable-looking results and no table scans.
Reviewers: btrahan, bigo
Reviewed By: bigo
Subscribers: bigo, epriestley
Maniphest Tasks: T4637
Differential Revision: https://secure.phabricator.com/D8557
Summary: Ref T2217. I'll hold this for a month or so, but once we're confident the migration didn't ruin anything we should nuke this old data -- it's just an insurance policy against discovering migration issues.
Test Plan: Will run in a month or so.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7104
Summary:
Ref T988. This fixes the biggest current problem with Diviner, which is dead links to articles.
In the new Diviner, articles can have both a "name" (derived from the file name, and used in the URI) and a "title" (optional, specified explicitly). For example, we have one document with the name "feedback" and the title "Give Feedback! Get Support!".
On disk, we want to use the name for the actual file where the text lives ("feedback.diviner"). We also want to use the name in the URI, to generate a clean URI and to allow us to retitle the document slightly without breaking links to it (for example, we renamed the "Backup" document to "Backups and Migrations").
However, when displaying the article we want to use the title.
Currently, you can //only// link to the name, not the title. This is inconvenient:
- We have a bunch of existing docs which link to titles.
- It's natural/intuitive to link to titles.
- Linking to titles makes it easier/cheaper to generate documentation, because we don't need to be able to resolve things at render time.
To remedy this, allow links to target either names or titles. If we miss on a name query, we'll do a title query. This is implemented with a slug hash to allow approximately correct titles (wrong case/spacing/punctuation, e.g.) and sidestep all the UTF8/column length issues.
(In the long run, atom resolution should theoretically be more sophistiated than it is now, and we should do render-time lookups on at least some documents to catch bad links. However, this is fairly complicated and a relatively advanced feature, and I think allowing links to titles is desirable no matter what.)
Test Plan: The user documentation book now has valid links to articles when the titles and names differ.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T988
Differential Revision: https://secure.phabricator.com/D8407
Summary:
Ref T2222. Make the "EditPro" controller accommodate diff updates, and support the transaction type. This one is pretty straightforward.
Also make `revisionPHID` in the comments table nullable to fix the "Edit" action.
Test Plan:
- Created new revision.
- Updated revision.
- Tried to do some invalid stuff.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8376
Summary: Ref T2222. Ref T3886. Differential has a legacy storage table for auxiliary fields; move the data to modern storage.
Test Plan:
- Ran migration.
- Verified fields still worked properly afterward (view, edit, etc).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3886, T2222
Differential Revision: https://secure.phabricator.com/D8355
Summary: Ref T2222. This is obsolete and no longer used. We could deduce it from transactions or commits in modern Phabricator if we wanted it. We may implement a more general mechanism for T4434.
Test Plan: `grep`
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8330
Summary:
Ref T1191. Test that MySQL's rules match those of `phutil_is_utf8_with_only_bmp_characters()`:
- Build a string with //every// character that we consider to be a BMP character.
- Write it into MySQL.
- Read it back out.
- Make sure MySQL didn't truncate it.
Test Plan: Ran unit test. This test runs pretty quickly (50ms), the string with every character isn't all that enormous.
Reviewers: btrahan, arice
Reviewed By: arice
CC: chad, arice, aran
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D8314
Summary: ...do it somewhat generically, so we could fairly easily add this to other applications. Fixes T3496. I got a wee bit lazy and decided not to migrate existing drafts. My excuses aside from laziness are doing it this way will let us see if anyone complains, we can always do a migration later if people do complain, and there's likely to be a lot of garbage data for older / bigger installs, and the migration didn't seem worth itgiven it would also likely be expensive in these cases.
Test Plan: made a draft inline comment on DX and observed DX had a note icon on Differential home page. made a draft comment on DX and observed DX had a note icon on Differential home page. deleted a draft inline comment and noted icon disappeared from Differential homepage. Submitted a draft comment + inline comment and noted icon disappeared.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3496
Differential Revision: https://secure.phabricator.com/D8275
Summary: Fixes T4443. Plug VCS passwords into the shared key stretching. They don't use any real stretching now (I anticipated doing something like T4443 eventually) so we can just migrate them into stretching all at once.
Test Plan:
- Viewed VCS settings.
- Used VCS password after migration.
- Set VCS password.
- Upgraded VCS password by using it.
- Used VCS password some more.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4443
Differential Revision: https://secure.phabricator.com/D8272
Summary:
Ref T1812. This cleans up most of the easy hard-coded references to specific statuses:
- The "fixes" language moves into ManiphestTaskStatus.
- Add a method to list open statuses.
- Add a method to test if a status is open.
- Add a method to get default status for new tasks.
Test Plan: Browsed around, lint, grep, created, filtered and updated tasks.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1812
Differential Revision: https://secure.phabricator.com/D8264
Summary:
Ref T2222. This is the big one.
This migrates each `DifferentialComment` to one or more ApplicationTransactions (action, cc, reviewers, update, comment, inlines), and makes `DifferentialComment` a double-reader for ApplicationTransactions.
The migration is pretty straightforward:
- If a comment took an action not otherwise covered, it gets an "action" transaction. This is something like "epriestley abandoned this revision.".
- If a comment updated the diff, it gets an "updated diff" transaction. Very old transactions of this type may not have a diff ID (probably only at Facebook).
- If a comment added or removed reviewers, it gets a "changed reviewers" transaction.
- If a comment added CCs, it gets a "subscribers" transaction.
- If a comment added comment text, it gets a "comment" transaction.
- For each inline attached to a comment, we generate an "inline" transaction.
Most comments generate a small number of transactions, but a few generate a significant number.
At HEAD, the code is basically already doing this, so comments in the last day or two already obey these rules, roughly, and will all generate only one transaction (except inlines).
Because we've already preallocated PHIDs in the comment text table, we only need to write to the transaction table.
NOTE: This significantly degrades Differential, making inline comments pretty much useless (they each get their own transaction, and don't show line numbers or files). The data is all fine, but the UI is garbage now. This needs to be fixed before we can deploy this to users, but it's easily separable since it's all just display code.
Specifically, they look like this:
{F112270}
Test Plan:
I've migrated locally and put things through their paces, but it's hard to catch sketchy stuff locally because most of my test data is nonsense and bad migrations wouldn't necessarily look out of place.
IMPORTANT: I'm planning to push this to a branch and then shift production over to the branch, and run it for a day or two before bringing it to master.
I generally feel good about this change: it's not that big since we were able to separate a lot of pieces out of it, and it's pretty straightforward. That said, it's still one of the most scary/dangerous changes we've ever made.
Reviewers: btrahan
CC: chad, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8210
Summary:
Ref T2222. Ref T4415. We're still writing Differential subscription stuff into this weird legacy `differential_relationship` table, which is like an edge table but extremely ancient.
Move it into a proper table.
I've removed `withSubscriptions()` from `DifferentialRevisionQuery`. It was weird, doesn't work consistently with other similar filters, and was only used by the API. Now it means "ccs", which is consistent with the ApplicationSearch UI and with Maniphest.
Test Plan:
Without migrating, added and removed subscribers via various workflows. Queried for subscribers. Everything worked as expected.
Ran the migration, verified data survived.
Reviewers: btrahan
Reviewed By: btrahan
CC: FacebookPOC, aran
Maniphest Tasks: T2222, T4415
Differential Revision: https://secure.phabricator.com/D8202
Summary:
Ref T2222. Currently, `DifferentialComment` stores both (a) the text of comments and (b) various other transaction details. This data needs to map to both Transactions and TransactionComments in the long run. This diff separates out all the data which is bound for the TransactionComment table, so that when we migrate `DifferentialComment` itself it will //only// need to migrate into the Transactions table. This is a much simpler migration than the inline comment one was, partly because it set up infrastructure and partly because the data is less complex.
Basically, I'm just proxying the read/write for the comment text into the other table. All readers already go through the Query class, and there are only three writers (preview, comment, implicit comment on diff update) which are all highly regular and straightforward to test.
We can also back out of this diff very easily: doing double writes cost only one line of code (`$this->content = $content;`) so we have proper double writes and a trivial revert path.
Test Plan:
- Without migrating, added comments and saw them show up.
- Migrated.
- Saw all the old comments, and no damage to the new ones.
- Added new comments.
- Used comment preview.
- Updated a revision to implicitly create an update comment and verified it looked OK.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8196
Summary:
Fixes T4379. Several changes:
- Migrate all project members into subscribers.
- When members are added or removed, subscribe or unsubscribe them.
- Show sub/unsub in the UI.
- Determine mailable membership of projects by querying subscribers.
Test Plan:
- As `duck`, joined a project.
- Added the project as a reviewer to a revision.
- Commented on the revision.
- Observed `duck` receive mail.
- Unsubscribed as `duck`.
- Observed no mail.
- Resubscribed as `duck`.
- Mail again.
- Joined/left project, checked sub/unsub status.
- Ran migration, looked at database.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, asherkin
Maniphest Tasks: T4379
Differential Revision: https://secure.phabricator.com/D8189
Summary: ...by the surprising step of changing how this data is stored from id to phid. Also a small fix to not allow "disabled" rules to be used as herald rule conditions, i.e. can't make a rule that depends on a disabled rule.
Test Plan: viewed existing herald rule that had a rule condition and noted nice new display using handle. made a new rule that had a rule condition and verified it worked correctly.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8186
Summary:
Ref T4379. Long ago, the "Project" vs "ProjectProfile" split was intended to allow a bunch of special fields on projects without burdening the simple use cases, but CustomField handles that far better and far more generally, and doing this makes using ApplicationTransactions a pain to get right, so get rid of it.
The only remaining field is `profileImagePHID`, which we can just move to the main Project object. This is custom enough that I think it's reasonable not to express it as a custom field.
Test Plan: Created a project, set profile, edited project, viewed in typeahead, ran migration, verified database results.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4379
Differential Revision: https://secure.phabricator.com/D8183
Summary: Ref T4379. Major goal here is to remove `ProjectProfile` so all edits use ApplicationTransactions. This also makes things more flexible, allowing users to disable this field if they don't like it.
Test Plan: Ran migration, verified data survived, edited/created projects, reordered fields.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4379
Differential Revision: https://secure.phabricator.com/D8182
Summary:
See <https://github.com/facebook/phabricator/issues/505>. When the status/event table moved, it broke this migration, which implicitly loads statuses by loading events.
Instead, access just the row we care about.
Test Plan: Used `--apply` to apply the new version of the patch.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D8162
Summary: See IRC. This migration inadvertently depends on the columns in the commit table, because it calls `save()`, and thus broke for installs with data after we added the `importStatus` column. Since that was ~9 months after this patch, probably not many installs are affected.
Test Plan: Ran patch locally with `--apply` on data. Had user verify fix.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8152
Summary: Ref T4375. We're going to need these for a bunch of infrastructure to work.
Test Plan: Ran migrations, checked DB, used `phid.query`.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T4375
Differential Revision: https://secure.phabricator.com/D8151
Summary: Ref T4375. We never join this table, so this is a pretty straight find/replace.
Test Plan: Browsed around Calendar, verified that nothing seemed broken. Saw my red dot in other apps.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4375
Differential Revision: https://secure.phabricator.com/D8145
Summary: Ref T3583. This doesn't add any dashboard/panel-specific code beyond headers/titles/buttons/etc., but allows you to create and view dashboards and panel skeletons.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3583
Differential Revision: https://secure.phabricator.com/D8131
Summary: Ref T4368. We don't currently GC these tables, and the sent mail table is one of the largest on `secure.phabricator.com`. There's no value in retaining this information indefinitely. Instead, retain it for 90 days, which should be plenty of time to debug/diagnose any issues.
Test Plan: Ran `phd debug garbage`, saw it clean up a reasonable amount of data from these tables.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4368
Differential Revision: https://secure.phabricator.com/D8127
Summary:
Fixes T4202. We have old code in MetaMTA which implements gradual backoff and maximum retries.
However, we have more general code in the task queue which does this, too. We can just use the more general stuff in the task queue; it obsoletes the specific stuff in MetaMTA, which is more complex and ran into some kind of issue in T4202.
Remove `retryCount`, `nextRetry` (obsoleted by task queue retry mechanisms) and "simulated failures" (no longer in use).
Generally, modern infrastructure has replaced these mechanisms with more general ones.
Test Plan:
- Sent mail.
- Observed unsendable mail failing in reasonable ways in the queue.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4202
Differential Revision: https://secure.phabricator.com/D8115
Summary:
Ref T3583. General idea here is:
- Users will be able to create `DashboardPanel`s, which are things like the jump nav, or a minifeed, or recent assigned tasks, or recent tokens given, or whatever else.
- The `DashboardPanel`s can be combined into `Dashboard`s, which select specific panels and arrange them in some layout (and maybe have a few other options eventually).
- Then, you'll be able to set a specific `Dashboard` for your home page, and maybe for project home pages. But you can also use `Dashboard`s on their own if you just like dashboards.
My plan is pretty much:
- Put in basic infrastructure for dashboards (this diff).
- Add basic create/edit (next few diffs).
- Once dashboards sort of work, do the homepage integration.
This diff does very little: you can't create dashboards or panels yet, and thus there are no dashboards to look at. This is all skeleton code, pretty much.
IMPORTANT: We need an icon bwahahahahaha
Test Plan:
omg si purrfect
{F106367}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3583
Differential Revision: https://secure.phabricator.com/D8109
Summary:
Moves away from ArcanistProjects:
- Adds storage for diffs to be directly associated with a repository (instead of indirectly, through arcanist projects). Not really populated yet.
- Drops `parentRevisionID`, which is obsoleted by the "Depends On" edge. This is not exposed in the UI anywhere and doesn't do anything. Resolves TODO.
Test Plan: Ran storage upgrades, browsed around, lots of `grep`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8072
Summary: Ref T4327. The change parser unit tests need database fixtures, which are getting a bit slow to build. Speed them up by updating the quickstart.
Test Plan: Initialized new storage via quickstart, clicked around, everything seemed to work properly. Ran all unit tests.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D8004
Summary:
Ref T4327. I want to make change parsing testable; one thing which is blocking this is that the Git discovery process is still part of `PullLocal` daemon instead of being part of `DiscoveryEngine`. The unit test stuff which I want to use for change parsing relies on `DiscoveryEngine` to discover repositories during unit tests.
The major reason git discovery isn't part of `DiscoveryEngine` is that it relies on the messy "autoclose" logic, which we never implemented for Mercurial. Generally, I don't like how autoclose was implemented: it's complicated and gross and too hard to figure out and extend.
Instead, I want to do something more similar to what we do for pushes, which is cleaner overall. Basically this means remembering the old branch heads from the last time we parsed a repository, and figuring out what's new by comparing the old and new branch heads. This should give us several advantages:
- It should be simpler to understand than the autoclose stuff, which is pretty mind-numbing, at least for me.
- It will let us satisfy branch and tag queries cheaply (from the database) instead of having to go to the repository. We could also satisfy some ref-resolve queries from the database.
- It should be easier to extend to Mercurial.
This implements the basics -- pretty much a table to store the cursors, which we update only for Git for now.
Test Plan:
- Ran migration.
- Ran `bin/repository discover X --trace --verbose` on various repositories with branches and tags, before and after modifying pushes.
- Pushed commits to a git repo.
- Looked at database tables.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D7982
Summary:
Ref T4310. Fixes T3720. This change:
- Removes concurrent session limits. Instead, unused sessions are GC'd after a while.
- Collapses all existing "web-1", "web-2", etc., sessions into "web" sessions.
- Dramatically simplifies the code for establishing a session (like omg).
Test Plan: Ran migration, checked Sessions panel and database for sanity. Used existing session. Logged out, logged in. Ran Conduit commands.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T3720
Differential Revision: https://secure.phabricator.com/D7978
Summary:
Ref T3116. This creates a policy rule where you can require a signature on a given legalpad document.
NOTE: signatures must be for the *latest* document version.
Test Plan: made a task have a custom policy requiring a legalpad signature. verified non-signers were locked out.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3116
Differential Revision: https://secure.phabricator.com/D7977
Summary:
Ref T3720. Ref T4310. Currently, we limit the maximum number of concurrent sessions of each type. This is primarily because sessions predate garbage collection and we had no way to prevent the session table from growing fairly quickly and without bound unless we did this.
Now that we have GC (and it's modular!) we can just expire unused sessions after a while and throw them away:
- Add a `sessionExpires` column to the table, with a key.
- Add a GC for old sessions.
- When we establish a session, set `sessionExpires` to the current time plus the session TTL.
- When a user uses a session and has used up more than 20% of the time on it, extend the session.
In addition to this, we could also rotate sessions, but I think that provides very little value. If we do want to implement it, we should hold it until after T3720 / T4310.
Test Plan:
- Ran schema changes.
- Looked at database.
- Tested GC:
- Started GC.
- Set expires on one row to the past.
- Restarted GC.
- Verified GC nuked the session.
- Logged in.
- Logged out.
- Ran Conduit method.
- Tested refresh:
- Set threshold to 0.0001% instead of 20%.
- Loaded page.
- Saw a session extension ever few page loads.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T3720
Differential Revision: https://secure.phabricator.com/D7976
Summary:
Ref T4310. Ref T3720. Two major things are going on here:
- I'm making this table work more like a standard table, which, e.g., makes `delete()` simpler to implement.
- Currently, the primary key is `(userPHID, type)`. I want to get rid of this, issue unlimited sessions, and GC old sessions. This means we can't have a unique key on `(userPHID, type)` anymore. This removes it as the primary key and adds it as a normal key instead. There's no functional change -- the code to generate sessions guarantees that it will never write duplicate rows or write additional rows -- but allows us to drop the `-1`, `-2` qualifiers in the future.
- Also of note, our task is made far simpler here because MySQL will automatically assign values to new `AUTO_INCREMENT` columns, so we don't have to migrate to get real IDs.
Test Plan: Ran migrations, verified table looked sane. Logged out, logged in.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3720, T4310
Differential Revision: https://secure.phabricator.com/D7975
Summary: Adds "verified" and "secretKey" to Legalpad document signatures. For logged in users using an email address they own, things are verified right away. Otherwise, the email is sent a verification letter. When the user clicks the link the signature is marked verified.
Test Plan: signed the document with a bogus email address not logged in. verified the email that would be sent looked good from command line. followed link and successfully verified bogus email address
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran, asherkin
Maniphest Tasks: T4283
Differential Revision: https://secure.phabricator.com/D7930
Summary: This adds in the create flow for the Project board columns on the super secret board page which totally doesn't do anything right now.
Test Plan:
1. Apply diff.
2. Go to super secret page.
3. Click link close to top with a way too long name.
4. Enter a name for the column.
5. Enjoy a new column briefly before realising you cannot remove it.
6. Stay happy!
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: tmaroschik, Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7925
Summary:
Ref T2015. Adds human-readable names to Drydock blueprints.
Also the new patches stuff is so much nicer.
Test Plan: Edited, created, and reviewed migrated blueprints.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7918
Summary:
Ref T1049. Currently you can cancel a build, but now that we're tracking a lot more state we can stop, resume, and restart builds.
When the user issues a command against a build, I'm writing it into an auxiliary queue (`HarbormasterBuildCommand`) and then reading them out in the worker. This is mostly to avoid race messes where we try to `save()` the object in multiple places: basically, the BuildEngine is the //only// thing that writes to Build objects, and it holds a lock while it does it.
Test Plan:
- Created a plan which runs "sleep 2" a bunch of times in a row.
- Stopped, resumed, and restarted it.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, chad
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7892
Summary:
If you have private replies on and a Macro reply handler set, we try to access `getMailKey()` and fail. See P1039 for a trace.
(Thanks to @Korvin for picking this up.)
Test Plan: Set configuration, repro'd the exception, applied the patch, then disabled/enabled a macro.
Reviewers: btrahan
Reviewed By: btrahan
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7896
Summary:
Repositories currently have a no-UI "shortcut" feature which is only used by Facebook (and I'm not sure it's even used). As implemented, this feature is policy-oblivious and kind of nonsensical. Throw it away.
I'm open to reimplementing this, but I want to see some level of interest in it before I do. The new implementation would add shortcuts to each repository, similar to how mirrors work. My original plan was to follow this up with such an implementation (it's half-implemented in my sandbox), but as I worked through it I'm not sure it's really valuable.
Test Plan: Browsed repository list, grep.
Reviewers: btrahan
Reviewed By: btrahan
CC: FacebookPOC, aran
Differential Revision: https://secure.phabricator.com/D7862
Summary:
Ref T4264. This gets most of the plumbing in for "object" rules, which will bind to a specific object, like a repository or project.
It does not yet let you actually create these rules.
Test Plan: Ran `storage upgrade`, created/edited rules, browsed Herald.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4264
Differential Revision: https://secure.phabricator.com/D7847
Summary:
Ref T1049. Generally, it's useful to separate test/trial/manual runs from production/automatic runs.
For example, you don't want to email a bunch of people that the build is broken just because you messed something up when writing a new build plan. You'd rather try it first, then promote it into production once you have some good runs.
Similarly, test runs generally should not affect the outside world, etc. Finally, some build steps (like "wait for other buildables") may want to behave differently when run in production/automation than when run in a testing environment (where they should probably continue immediately).
So, formalize the distinction between automatic buildables (those created passively by the system in response to events) and manual buildables (those created explicitly by users). Add filtering, and stop the automated parts of the system from interacting with the manual parts (for example, we won't show manual results on revisions).
This also moves the "Apply Build Plan" to a third, new home: instead of the sidebar or Buildables, it's now on plans. I think this generally makes more sense given how things have developed. Broadly, this improves isolation of test environments.
Test Plan: Created some builds, browsed around, used filters, etc.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7824
Summary: Ref T4010. I'll hold this for a bit, but we should eventually drop this table once the dust has settled.
Test Plan: Ran storage upgrade.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4010
Differential Revision: https://secure.phabricator.com/D7372
Summary: Ref T4195. We need these in Herald, since HeraldTranscripts need to refer to a PHID which they acted upon.
Test Plan:
Ran migration, got PHIDs:
mysql> select phid from repository_pushlog limit 3;
+--------------------------------+
| phid |
+--------------------------------+
| PHID-PSHL-25jnc6cjgzw5rwqgmr7r |
| PHID-PSHL-2vrvmtslkrj5yv7nxsv2 |
| PHID-PSHL-34x262zkrwoka6mplony |
+--------------------------------+
3 rows in set (0.00 sec)
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7780
Summary: This implements support for enforcing and setting policies in Phragment.
Test Plan: Set policies and ensured they were enforced successfully.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7751
Summary:
Ref T4212. This implements snapshots in Phragment, which allows you to take a snapshot of a fragment at a given point in time, and download a ZIP of the snapshot as it was in this state.
There's also functionality for deleting and promoting snapshots. You can promote a snapshot to either the latest version or any other snapshot of the fragment.
Test Plan: Clicked around, took some snapshots, promoted them to different points and deleted snapshots. Also downloaded ZIPs of the snapshots and saw the right versions coming through for all the files downloaded.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205, T4212
Differential Revision: https://secure.phabricator.com/D7741
Summary:
This implements support for creating and updating fragments from ZIP files. It allows you to upload a ZIP via the Files application, create a fragment from it, and have it recursively imported into Phragment. Updating that folder with another ZIP will recursively create, update and delete files as appropriate.
The logic for creating and updating fragments from files has also been centralized into the PhragmentFragment class. Directories are also now supported; a directory fragment is simply a fragment that has no patches; thus a directory fragment can be converted to a file fragment by uploading a first patch for it.
Test Plan: Uploaded ZIP files through the interface and saw all of the fragments get created and updated as expected.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7729
Summary: Ref T4205. This is an initial implementation of Phragment. You can create and browse fragments in the system (but you can't yet view a fragment's patches / history).
Test Plan: Clicked around and created fragments.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7726
Summary: This implements support for explicitly marking the sequence of build steps. Users can now drag and re-order build steps in plans, and artifact dependencies are re-calculated so that if you move "Run Command" before "Lease Host", the "Run Command" step has it's artifact setting cleared and thus the step becomes invalid.
Test Plan: Re-ordered build steps and observed dependencies being correctly recalculated.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7715
Summary:
Ref T4195. This log serves two purposes:
- It's a log, so you can see what happened. Particularly, in Git/Hg, there is no other way to tell:
- Who //pushed// a change (vs committed / authored)?
- When was a change pushed?
- What was the old value of some tag/branch before someone destroyed it?
- We can hand these objects off to Herald to implement pre-commit rules.
This is a very basic implementation, but gets some data written and has a basic UI for it.
Test Plan: {F87339}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7705
Summary: This implements build targets as outlined in D7582. Build targets represent an instance of a build step particular to the build. Logs and artifacts have been adjusted to attach to build targets instead of build / build step pairs.
Test Plan: Ran builds and clicked around the interface. Everything seemed to work.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4111, T1049
Differential Revision: https://secure.phabricator.com/D7703
Summary:
//(this diff used to be about applying policies to blueprints)//
This restructures Drydock so that blueprints are instances in the DB, with an associated implementation class. Thus resources now have a `blueprintPHID` instead of `blueprintClass` and DrydockBlueprint becomes a DAO. The old DrydockBlueprint is renamed to DrydockBlueprintImplementation, and the DrydockBlueprint DAO has a `blueprintClass` column on it.
This now just implements CAN_VIEW and CAN_EDIT policies for blueprints, although they are probably not enforced in all of the places they could be.
Test Plan: Used the `create-resource` and `lease` commands. Closed resources and leases in the UI. Clicked around the new and old lists to make sure everything is still working.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4111, T2015
Differential Revision: https://secure.phabricator.com/D7638
Summary: Fixes T4183. If you have too many repositories sharing the same credential and MySQL is in strict mode, we'll fail a query when trying to write a credential with a name longer than 255 characters. Instead, shorten the variable-length part to 128 characters.
Test Plan: Wiped credentials column and successfully re-ran migration with `storage upgrade --force --apply phabricator:20131121.repocredentials.2.mig.php`
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4183
Differential Revision: https://secure.phabricator.com/D7677
Summary: See IRC. It's possible to have a functional repository with the SSH username only in the URL. Look there if the username property isn't set. These should all be older repostiories.
Test Plan: Did a `--force --apply` upgrade.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7665
Summary:
Ref T4038. This adds everything except the actual pushing part for mirrors.
This isn't the most beautiful or sophisticated UI, but I want get the authoritative repositories self-hosted and get users beta-ing hosting as soon as possible. We can do transactions, etc., later on.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4038
Differential Revision: https://secure.phabricator.com/D7632
Summary: Fixes T4122. Ref T2230. Instead of storing credentials on each repository, store them in Passphrase. This allows easy creation/management of many repositories which share credentials.
Test Plan:
- Upgraded repositories.
- Created and edited repositories.
- Pulled HTTP and SSH repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230, T4122
Differential Revision: https://secure.phabricator.com/D7629
Summary: Ref T4122. Add an edge to keep track of where a credential is used, and show it in the UI.
Test Plan:
See "Used By":
{F84099}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4122
Differential Revision: https://secure.phabricator.com/D7628
Summary: ...and get the basic edit flow "working" for a new NuanceSourceDefinition - the Phabricator Form. ...and fix a dumb bug in the query class so when you redirect to the view page / try to edit an existing NuanceSource you don't fatal.
Test Plan: played around with the edit form and it worked!
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7585
Summary:
Ref T4122. Implements a credential management application for the uses described in T4122.
@chad, this needs an icon, HA HA HAHA HA BWW HA HA HA
bwahaha
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T4122
Differential Revision: https://secure.phabricator.com/D7608
Summary:
Ref T4110. This denormalized field used to power "Group By: Assigned" got dropped in the T2217 migration at some point.
Restore its population, and fix all the data in the database.
Test Plan: Ran migration, verified database came out reasonable-looking. Reassigned a task, verified database. Ran a "Group By: assigned" query.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4110
Differential Revision: https://secure.phabricator.com/D7602
Summary:
Small step forward which improves existing stuff or lays groudwork for future stuff:
- Currently, to check for email verification, we have to single-query the email address on every page. Instead, denoramlize it into the user object.
- Migrate all the existing users.
- When the user verifies an email, mark them as `isEmailVerified` if the email is their primary email.
- Just make the checks look at the `isEmailVerified` field.
- Add a new check, `isUserActivated()`, to cover email-verified plus disabled. Currently, a non-verified-but-not-disabled user could theoretically use Conduit over SSH, if anyone deployed it. Tighten that up.
- Add an `isApproved` flag, which is always true for now. In a future diff, I want to add a default-on admin approval queue for new accounts, to prevent configuration mistakes. The way it will work is:
- When the queue is enabled, registering users are created with `isApproved = false`.
- Admins are sent an email, "[Phabricator] New User Approval (alincoln)", telling them that a new user is waiting for approval.
- They go to the web UI and approve the user.
- Manually-created accounts are auto-approved.
- The email will have instructions for disabling the queue.
I think this queue will be helpful for new installs and give them peace of mind, and when you go to disable it we have a better opportunity to warn you about exactly what that means.
Generally, I want to improve the default safety of registration, since if you just blindly coast through the path of least resistance right now your install ends up pretty open, and realistically few installs are on VPNs.
Test Plan:
- Ran migration, verified `isEmailVerified` populated correctly.
- Created a new user, checked DB for verified (not verified).
- Verified, checked DB (now verified).
- Used Conduit, People, Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7572
Summary:
Depends on D7519.
This implements support for build logs in Harbormaster. This includes support for appending to a log from the "Run Remote Command" build step.
It also adds the ability to cancel builds.
Currently the build view page doesn't update the logs live; I'm sure this can be achieved with Javelin, but I don't have enough experience with Javelin to actually make it poll from updates to content in the background.
{F79151}
{F79153}
{F79150}
{F79152}
Test Plan:
Tested this by setting up SSH on a Windows machine and using a Remote Command configured with:
```
C:\Windows\system32\cmd.exe /C cd C:\Build && mkdir Build_${timestamp} && cd Build_${timestamp} && git clone --recursive https://github.com/hach-que/Tychaia.git && cd Tychaia && Protobuild.exe && C:\Windows\Microsoft.NET\Framework\v4.0.30319\MSBuild.exe Tychaia.Windows.sln
```
and observed the output of the build stream from the Windows machine into Phabricator.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7521
Summary:
I updated the wiki too - https://secure.phabricator.com/w/projects/pebkac/ - with what I am thinking right now. Rough plan here is
- next diff:
- implement editors and transactions
- implement "web type" for contact source
- /pebkac/item/new/ will be the entry point for this
- implement "actions" on a contact
- probably some "polish" on the scaffolding laid out here; like "create" permissions maybs
- diffs after that:
- implement "twitter" type for source
- implement email reply handler stuff for item and source
Probs a great time to blast huge holes in all this stuff. :D
Test Plan: these pages load and arc lint doesn't complain
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran, chad
Differential Revision: https://secure.phabricator.com/D7465
Summary:
Ref T1049. Ref T2222. `DifferentialDiff` does not currently have a PHID, but we need it for Harbormaster and ApplicationTransactions. See some discussion in D7501.
(I split the SQL into two sections so we can't fail in the middle. At some point, I'd like to do a pass on the migration stuff and get this happening automatically, and also simplify the PatchList.)
Test Plan:
- Ran `bin/storage upgrade`.
- Checked for valid PHIDs in the database.
- Used `phid.query` to look up a diff by PHID.
- Created a new diff and verified it got a PHID.
Reviewers: btrahan, hach-que
Reviewed By: btrahan
CC: aran, vrana
Maniphest Tasks: T2222, T1049
Differential Revision: https://secure.phabricator.com/D7513
Summary:
Depends on D7498.
This implements support for a "build step implementation". Build steps have an associated class name (which makes the class in PHP) and a details field, which is serialized JSON (same as PhabricatorRepository).
This also implements a SleepBuildStepImplementation which just pauses the build for a specified period of seconds.
Test Plan:
Inserted a build step with `insert into harbormaster_buildstep (phid, buildPlanPHID, className, details, dateCreated, dateModified) values ('', 'PHID-HMCP-zkh5w6czfbfpk2gxwdeo', 'SleepBuildStepImplementation', '{"seconds":5}', NOW(), NOW());` (adjusting the build plan PHID as appropriate).
Started the daemon and applied the build plan to a buildable, and saw the daemon take a 5 second delay after creating `SleepBuildStepImplementation`.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, chad
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7499
Summary: This allows users to set their HTTP access passwords via Diffusion interface.
Test Plan: Clicked the "Set HTTP Access Password" link, set a password and saw it appear in the DB.
Reviewers: #blessed_reviewers, hach-que, btrahan
Reviewed By: hach-que
CC: Korvin, epriestley, aran, jamesr
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7462
Summary:
`RepositoryStatusMessage` is basically a key/value table associated with a repository that I'm using to let the daemons store the most recent event of a given type, so we can easily show it on the status dashboard. I think this will be a lot easier for users to figure out than digging through logfiles.
I'm also going to write the "this needs a pull" status here eventually, for reducing the time lapse between pushes and discovery.
- Add storage for these messages.
- Have the pull engine populate the INIT phase. I'll do the FETCH phase next.
- Update the status readout to show all the various states.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7461
Summary:
Fixes T3416. Fixes T1733.
- Adds a flag to the commit table showing whether or not we have parsed it.
- The flag is set to `0` initially when the commit is discovered.
- The flag is set to `1` when the changes are parsed.
- The UI can now use the flag to distinguish between "empty commit" and "commit which we haven't imported changes for yet".
- Simplify rendering code a little bit.
- Fix an issue with the Message parser for empty commits.
- There's a key on the flag so we can do `SELECT * FROM repository_commit WHERE repositoryID = %d AND importStatus = 0 LIMIT 1` soon, to determine if a repository is fully imported or not. This will let us improve the UI (Ref T776, Ref T3217).
Test Plan:
- Ran `bin/storage upgrade -f`.
- Created an empty commit.
- Without the daemons running, ran `bin/repository pull GTEST` and `bin/repository discover GTEST`.
- Viewed web UI to get the first screenshot ("Still Importing...").
- Ran the message and change steps with `scripts/repository/reparse.php`.
- Viewed web UI to get the second screenshot ("Empty Commit").
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T776, T1733, T3416, T3217
Differential Revision: https://secure.phabricator.com/D7428
Summary: No editing or view yet, just adds the schema and a policy default. Part of D7391.
Test Plan: `bin/storage upgrade`
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7415
Summary:
Ref T1049. I don't really want to sink too much time into this right now, but a seemingly reasonable architecture came to me in a dream. Here's a high-level overview of how things fit together:
- **"Build"**: In Harbormaster, "build" means any process we want to run against a working copy. It might actually be building an executable, but it might also be running lint, running unit tests, generating documentation, generating symbols, running a deploy, setting up a sandcastle, etc.
- `HarbormasterBuildable`: A "buildable" is some piece of code which build operations can run on. Generally, this is either a Differential diff or a Diffusion commit. The Buildable class just wraps those objects and provides a layer of abstraction. Currently, you can manually create a buildable from a commit. In the future, this will be done automatically.
- `HarbormasterBuildStep`: A "build step" is an individual build operation, like "run lint", "run unit", "build docs", etc. The step defines how to perform the operation (for example, "run unit tests by executing 'arc unit'"). In this diff, this barely exists.
- `HarbormasterBuildPlan`: This glues together build steps into groups or sequences. For example, you might want to "run unit", and then "deploy" if the tests pass. You can create a build plan which says "run step "unit tests", then run step "deploy" on success" or whatever. In the future, these will also contain triggers/conditions ("Automatically run this build plan against every commit") and probably be able to define failure actions ("If this plan fails, send someone an email"). Because build plans will run commands, only administrators can manage them.
- `HarbormasterBuild`: This is the concrete result of running a `BuildPlan` against a `Buildable`. It tracks the build status and collects results, so you can see if the build is running/successful/failed. A `Buildable` may have several `Build`s, because you can execute more than one `BuildPlan` against it. For example, you might have a "documentation" build plan which you run continuously against HEAD, but a "unit" build plan which you want to run against every commit.
- `HarbormasterBuildTarget`: This is the concrete result of running a `BuildStep` against a `Buildable`. These are children of `Build`. A step might be able to produce multiple targets, but generally this is something like "Unit Tests" or "Lint" and has an overall status, so you can see at a glance that unit tests were fine but lint had some issues.
- `HarbormasterBuildItem`: An optional subitem for a target. For lint, this might be an individual file. For unit tests, an individual test. For normal builds, an executable. For deploys, a server. For documentation generation, there might just not be subitems.
- `HarbormasterBuildLog`: Provides extra information, like command/execution transcripts. This is where stdout/stderr will get dumped, and general details and other messages.
- `HarbormasterBuildArtifact`: Stores side effects or results from build steps. For example, something which builds a binary might put the binary in "Files" and then put its PHID here. Unit tests might put coverage information here. Generally, any build step which produces some high-level output object can use this table to record its existence.
This diff implements almost nothing and does nothing useful, but puts most of these object relationships in place. The two major things you can't easily do with these objects are:
1) Run arbitrary cron jobs. Jenkins does this, but it feels tacked on and I don't know of anyone using it for that. We could create fake Buildables to get a similar effect, but if we need to do this I'd rather do it elsewhere in general. Build and cron/service/monitoring feel like pretty different problems to me.
2) Run parameterized/matrix steps (maybe?). Bamboo has this plan/stage/task/job breakdown where a build step can generate a zillion actual jobs, like "build client on x86", "build server on x86", "build client on ARM", "build server on ARM", etc. We can sort of do this by having a Step map to multiple Targets, but I haven't really thought about it too much and it may end up being not-great. I'd guess we have like an 80% chance of getting a clean implementation if/when we get there. I suspect no one actually needs this, or when they do they'll just implement a custom Step and it can be parameterized at that level. I'm not too worried about this overall.
The major difference between this and Jenkins/Bamboo/TravisCI is that all three of those are **plan-centric**: the primary object in the system is a build plan, and the dashboard shows you all your build plans and the current status. I don't think this is the right model. One disadvantage is that you basically end up with top-level messaging that says "Trunk is broken", not "Trunk was broken by commit af32f392f". Harbormaster is **buildable-centric**: the primary object in the system is stuff you can run build operations against (commits/branches/revisions), and actual build plans are secondary. The main view will be "recent commits on this branch, and whether they're good or not" -- which I think is what's most important in a larger/more complex product -- not the pass/fail status of all jobs. This also makes it easier and more natural to integrate with Differential and Diffusion, which both care about the overall status of the commit/revision, not the current status of jobs.
Test Plan: Poked around, but this doesn't really do anything yet.
Reviewers: btrahan
Reviewed By: btrahan
CC: zeeg, chad, aran, seporaitis
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7368
Summary:
Ref T4010. Projects have a weird proto-version of ApplicationTransactions which is very similar but not quite the same.
Move the storage to a modern format, but keep all the other code for now.
Test Plan: Migrated project transactions; edited projects.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4010
Differential Revision: https://secure.phabricator.com/D7370
Summary:
Ref T1344. This is //very// rough. Some UI issues:
- Empty states for the board and columns are junky.
- Column widths are crazy. I think we need to set them to fixed-width, since we may have an arbitrarily large number of columns?
- I don't think we have the header UI elements in M10 yet and that mock is pretty old, so I sort of very roughly approximated it.
- What should we do when you click a task title? Popping the whole task in a dialog is possible but needs a bunch of work to actually work. Might need to build "sheets" or something.
- Icons are slightly clipped for some reason.
- All the backend stuff is totally faked.
Generally, my plan is just to use these to implement all of T390. Specifically:
- "Kanban" projects will have "Backlog" on the left. You'll drag them toward the right as you make progress.
- "Milestone" projects will have "No Milestone" on the left, then "Milestone 9", "Milestone 8", etc.
- "Sprint" projects will have "Backlog" on the left, then "Sprint 31", "Sprint 30", etc.
So all of these things end up being pretty much exactly the same, with some minor text changes and new columns showing up on the left vs the right or whatever.
Test Plan: See screenshot.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: chad, aran, sascha-egerer
Maniphest Tasks: T1344
Differential Revision: https://secure.phabricator.com/D7374
Summary: Ref T4010. Adds storage and indexes for custom fields. These tables are the same as people/maniphest/differential.
Test Plan: Ran `bin/storage upgrade`.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T4010
Differential Revision: https://secure.phabricator.com/D7369
Summary:
Ref T2222. This implements step (1) described there, which is moving over all the inline comments.
The old and new tables are simliar. The only real trick here is that `transactionPHID` and `legacyCommentID` mean roughly the same thing (`null` if the inline is a draft, non-null if it has been submitted) but we don't have real `transactionPHID`s yet. We just make some up -- we'll backfill them later.
Two risks here:
- I need to take a second look at the keys on this table. I think we need to tweak them a bit, and it will be less disruptive to do that before this migration than after.
- This will take a while for Facebook, and other large installs with tens of thousands of revisions. I'll communicate this.
I'm otherwise pretty satisfied with this, seems to work well and is pretty low risk / non-disruptive.
Test Plan:
- Before migrating, then after migrating:
- Made a bunch of inlines (drafts, submitted).
- Edited and deleted inlines.
- Verified inlines showed up in preview.
- Verified that inlines aren't indexed when they're drafts (`bin/search index D935`).
- Verified that inlines ARE indexed when they're not drafts.
- Verified that drafts inlines make revisions appear as "with draft" in the revision list.
- Made left, right, and draft inlines.
- Migrated (`bin/storage upgrade`).
- Verified that my inlines from before the migration still showed up.
- (Repeated all the stuff above.)
- Manually inspected the inline comment table.
Reviewers: btrahan
Reviewed By: btrahan
CC: FacebookPOC, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D7139
Summary: This data was migrated by D6977 and is now obsolete. I'll hold this patch for a week or two in case we get reports of migration errors.
Test Plan: Ran storage upgrade, saw the table vanish. Grepped for references to the table.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6997
Summary: Ref T603. Give countdowns proper UI-level policy controls, and an application-level default policy. Put policy information in the header.
Test Plan:
- Adjusted default policy.
- Created new countdowns.
- Edited countdowns.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7322
Summary:
Ref T603. Ref T1279. Further improves transaction and policy support for Herald.
- Instead of deleting rules (which wipes out history and can't be undone) allow them to be disabled.
- Track disables with transactions.
- Gate disables with policy controls.
- Show policy and status information in the headers.
- Show transaction history on rule detail screens.
- Remove the delete controller.
- Support disabled queries in the ApplicationSearch.
Test Plan:
- Enabled and disabled rules.
- Searched for enabled/disabled rules.
- Verified disabled rules don't activate.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279, T603
Differential Revision: https://secure.phabricator.com/D7247
Summary:
Ref T1279. @champo did a lot of this work already; we've been doing double writes for a long time.
Add "double reads" (reading the edge table as both the "relationship" table and as the "reviewer status" table), and migrate all the data.
I'm not bothering to try to recover old reviewer status (e.g., we could infer from transactions who accepted old revisions) because it wold be very complicated and doesn't seem too valuable.
Test Plan:
- Without doing the migration, used Differential. Verified that reads and writes worked. Most of the data was there anyway since we've been double-writing.
- Performed the migration. Verified that everything was still unchanged.
- Dropped the edge table, verified all reviweer data vanished.
- Migrated again, verified the reviewer stuff was restored.
- Did various cc/reviewer/subscriber queries, got consistent results.
Reviewers: btrahan
Reviewed By: btrahan
CC: champo, aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7227
Summary:
Ref T1279. This came to me in a dream.
The existing `differential_relationship` table has an `(objectPHID, type)` column, which theoretically is useful for queries like "revisions with X as a reviewer". In practice, I'm not sure it gets used much, but I can get it to show up in at least some query plans.
Add a similar index to the `edge` table. This sequences //before// D7227, which actually migrates the data.
Test Plan:
- Ran `bin/storage upgrade`.
- EXPLAIN'd a bunch of queries against different versions of the schema, this seemed helpful overall.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7232
Conflicts:
src/infrastructure/storage/patch/PhabricatorBuiltinPatchList.php
Summary:
Ref T603. Principally, I want to implement the rule "when you upload a file to an object, users must be able to see the object in order to see the file", since I think this is strongly in line with user expectation. For example, if you attach a file to a Conpherence, it should only be visible to members of that thread.
This adds storage for policies, but doesn't do anything interesting with it yet.
Test Plan: Ran `bin/storage upgrade`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7175
Summary: Ref T3887. Implements storage and editors, but not the actual audio part.
Test Plan: Edited audio, audio behaviors of macros. Transactions and email looked good. Hit error cases.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3887
Differential Revision: https://secure.phabricator.com/D7159
Summary:
Ref T2222. This sequences //before// D7139 and sorts out keys on the table. In particular:
- There was a fairly silly `draft` key modeled after Pholio; drop it.
- Add a `revisionPHID` key. This is queried mostly-transitionally on the revision view screen.
- Add a `changesetID` key. This is queried by a bunch of interfaces that want more surgical results than `revisionPHID` provides.
- Add an `authorPHID, transactionPHID` key. This is queried on the list interface to find pending drafts.
- Add a `legacy` key. This is queried by the feed publisher.
Test Plan: Used the query analyzer to hit all (I think?) of the pages, saw keyed queries.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D7140
Summary: Ref T603. Paves the way for policy controls.
Test Plan: Ran storage upgrade, bumbled around in Differential.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7133
Summary:
Ref T2217. Fixes T3876. We incorrectly have a unique key on `(authorPHID, transactionPHID)`, which prevents saving multiple versions of a comment.
I'm not entirely sure why this exists. I think it came from Pholio (where it works for inlines, because it has an additional component, but maybe should be adjusted) but we might need to wipe it out of more apps too.
Test Plan: Edited a comment in Maniphest.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217, T3876
Differential Revision: https://secure.phabricator.com/D7102
Summary: Ref T2217. Cleans up the table names. Moves old data to `maniphest_transaction_legacy`. We'll drop that eventually once it's more clear that I didn't break the world.
Test Plan: Did reads/writes to/from these tables.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7094
Summary: Ref T2217. Pro is the new standard.
Test Plan: Lots of `grep`, made a pile of Maniphest views/edits.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7093
Summary:
Ref T2217. This is the risky, hard part; everything after this should be smooth sailing. This is //mostly// clean, except:
- The old format would opportunistically combine a comment with some other transaction type if it could. We no longer do that, so:
- When migrating, "edit" + "comment" transactions need to be split in two.
- When editing now, we should no longer combine these transaction types.
- These changes are pretty straightforward and low-impact.
- This migration promotes "auxiliary field" data to the new CustomField/StandardField format, so that's not a straight migration either. The formats are very similar, though.
Broadly, this takes the same attack that the auth migration did: proxy all the code through to the new storage. `ManiphestTransaction` is now just an API on top of `ManiphestTransactionPro`, which is the new storage format. The two formats are very similar, so this was mostly a straight copy from one table to the other.
Test Plan:
- Without performing the migration, made a bunch of edits and comments on tasks and verified the new code works correctly.
- Droped the test data and performed the migration.
- Looked at the resulting data for obvious discrepancies.
- Looked at a bunch of tasks and their transaction history.
- Used Conduit to pull transaction data.
- Edited task description and clicked "View Details" on transaction.
- Used batch editor.
- Made a bunch more edits.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7068
Summary: Ref T2217. Add the tables and comment class for the new stuff. Not used yet.
Test Plan: Ran storage upgrade, browsed Maniphest.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2217
Differential Revision: https://secure.phabricator.com/D7066
Summary:
- Add some TODO'd keys.
- Add policy fields.
Test Plan: Viewed repositories; created a new repository and verified it got the right default policy settings.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7056
Summary: Ref T3794. Drop auxiliary field, use standard field.
Test Plan: Performed migration, field seemed to survive it intact. Edited and viewed tasks.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3794
Differential Revision: https://secure.phabricator.com/D7036
Summary: Ref T418. Moves data from the Maniphest-specific table to the general one. This patch is a bit gross, but mostly about getting the reads and writes aimed correctly. Future patches will clean things up.
Test Plan: Migrated data across formats. Verified it survied the migration. Viewed and edited tasks' custom fields.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T418
Differential Revision: https://secure.phabricator.com/D6999
Summary: Ref T418. Depends on D6992. This adds index and value storage for Maniphest custom fields.
Test Plan: Ran storage upgrade.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T418
Differential Revision: https://secure.phabricator.com/D6995
Summary:
Ref T2625. Ref T3794. Ref T418. Ref T1703.
This is a more general version of D5278. It expands CustomField support to include real integration with ApplicationSearch.
Broadly, custom fields may elect to:
- build indicies when objects are updated;
- populate ApplicationSearch forms with new controls;
- read inputs entered into those controls out of the request; and
- apply constraints to search queries.
Some utility/helper stuff is provided to make this easier. This part could be cleaner, but seems reasonable for a first cut. In particular, the Query and SearchEngine must manually call all the hooks right now instead of everything happening magically. I think that's fine for the moment; they're pretty easy to get right.
Test Plan:
I added a new searchable "Company" field to People:
{F58229}
This also cleaned up the disable/reorder view a little bit:
{F58230}
As it did before, this field appears on the edit screen:
{F58231}
However, because it has `search`, it also appears on the search screen:
{F58232}
When queried, it returns the expected results:
{F58233}
And the actually good bit of all this is that the query can take advantage of indexes:
mysql> explain SELECT * FROM `user` user JOIN `user_customfieldstringindex` `appsearch_0` ON `appsearch_0`.objectPHID = user.phid AND `appsearch_0`.indexKey = 'mk3Ndy476ge6' AND `appsearch_0`.indexValue IN ('phacility') ORDER BY user.id DESC LIMIT 101;
+----+-------------+-------------+--------+-------------------+----------+---------+------------------------------------------+------+----------------------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+-------------+--------+-------------------+----------+---------+------------------------------------------+------+----------------------------------------------+
| 1 | SIMPLE | appsearch_0 | ref | key_join,key_find | key_find | 232 | const,const | 1 | Using where; Using temporary; Using filesort |
| 1 | SIMPLE | user | eq_ref | phid | phid | 194 | phabricator2_user.appsearch_0.objectPHID | 1 | |
+----+-------------+-------------+--------+-------------------+----------+---------+------------------------------------------+------+----------------------------------------------+
2 rows in set (0.00 sec)
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T418, T1703, T2625, T3794
Differential Revision: https://secure.phabricator.com/D6992
Summary: Ref T2625. EVERYONE LOVES MIGRATIONS!!!
Test Plan:
- Created and migrated a query with every field, verified results were preserved.
- Created and migrated a query using "noproject" and "upforgrabs" magic, verified results were preserved.
Here's the pre-migration "everything" query:
{F58110}
Here it is after migration:
{F58111}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2625
Differential Revision: https://secure.phabricator.com/D6977
Summary: See discussion in D6955. This provides a table we can JOIN against to (effectively) "ORDER BY project name", populates it intially, and keeps it up to date as projects are edited.
Test Plan:
- Ran storage upgrade, verified projects populated into the table.
- Edited a project, verified its entry updated.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6957
Summary: Depends on D6952. Unpunts there since I'm rolling into a swamp full of schema changes.
Test Plan: Issued date-constrained query and saw key as a candidate.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6954
Summary: Noticed this in the schema. "Touches" were an idea that never really got off the ground, as we built out more/better notification channels instead. Essentially, they recorded any object you'd ever interacted with. Maybe this will be useful some day, but for now it does nothing and can't be interacted with. Nuke it.
Test Plan: `grep`, loaded Maniphest.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6953
Summary:
Fixes T3803. Turns out my advice was sort of terrible. :/
In strict mode, the `INSERT INTO x (y, z)` raises an error unless `(y, z, ...)` includes //all// columns without default values.
Test Plan: Ran `storage upgrade` on a strict-mode install. Verified no inserts were performed.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3803
Differential Revision: https://secure.phabricator.com/D6894
Summary: this ends up being a little weird since you can't actually edit files. Also, since we create files all sorts of ways, sometimes without even having a user, we don't bother logging transactions for those events. Fixes T3651. Turns out this work is important for T3612, which is a priority of mine to help get Pholio out the door.
Test Plan: left a comment on a file. it worked! use bin/mail to verify mail content looked correct.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran, wez
Maniphest Tasks: T3651, T3612
Differential Revision: https://secure.phabricator.com/D6789
Summary:
Ref T988. This brings the class/interface atomizer over. A lot of parts of this are still varying degrees of very-rough, but most of the data ends up in approximatley the right place.
ALSO: PROGRESS BARS
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T988
Differential Revision: https://secure.phabricator.com/D6817
Summary: Ref T3663. Does what it says on the tin.
Test Plan: Ran `storage upgrade`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3663
Differential Revision: https://secure.phabricator.com/D6778
Summary: Ref T3663. This is obsolete code which is used only in this migration, which Facebook has already performed and which isn't relevant for any other installs.
Test Plan: `grep`
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3663
Differential Revision: https://secure.phabricator.com/D6777
Summary:
Ref T1702. Ref T3718. There are a couple of things going on here:
**PhabricatorCustomFieldList**: I added `PhabricatorCustomFieldList`, which is just a convenience class for dealing with lists of fields. Often, current field code does something like this inline in a Controller:
foreach ($fields as $field) {
// do some junk
}
Often, that junk has some slightly subtle implications. Move all of it to `$list->doSomeJunk()` methods (like `appendFieldsToForm()`, `loadFieldsFromStorage()`) to reduce code duplication and prevent errors. This additionally moves an existing list-convenience method there, out of `PhabricatorPropertyListView`.
**PhabricatorUserConfiguredCustomFieldStorage**: Adds `PhabricatorUserConfiguredCustomFieldStorage` for storing custom field data (like "ICQ Handle", "Phone Number", "Desk", "Favorite Flower", etc).
**Configuration-Driven Custom Fields**: Previously, I was thinking about doing these with interfaces, but as I thought about it more I started to dislike that approach. Instead, I built proxies into `PhabricatorCustomField`. Basically, this means that fields (like a custom, configuration-driven "Favorite Flower" field) can just use some other Field to actually provide their implementation (like a "standard" field which knows how to render text areas). The previous approach would have involed subclasssing the "standard" field and implementing an interface, but that would mean that every application would have at least two "base" fields and generally just seemed bleh as I worked through it.
The cost of this approach is that we need a bunch of `proxy` junk in the base class, but that's a one-time cost and I think it simplifies all the implementations and makes them a lot less magical (e.g., all of the custom fields now extend the right base field classes).
**Fixed Some Bugs**: Some of this code hadn't really been run yet and had minor bugs.
Test Plan:
{F54240}
{F54241}
{F54242}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1702, T1703, T3718
Differential Revision: https://secure.phabricator.com/D6749
Summary: Ref T3656. Releeph denormalizes branch cut point identifiers into Branch objects, but this information isn't useful or used for sorting, filtering, or enforcing unique constraints. Instead, derive it via noramlized pathways from the `cutPointCommitPHID`.
Test Plan: Ran storage upgrade. Ran `releephwork.getbranch` and `releeph.getbranches`. Grepped for `cutPointCommitIdentifier`.
Reviewers: btrahan
Reviewed By: btrahan
CC: LegNeato, aran
Maniphest Tasks: T3656
Differential Revision: https://secure.phabricator.com/D6636
Summary:
Fixes T3660. Releeph Projects currently have an unused one-to-one mapping to Phabricator projects. This isn't consistent with other applications and has no integrations or uses. Get rid of it.
NOTE: Waiting for signoff from @legneato on T3660 before pulling the trigger here.
Test Plan: Created and edited Releeph projects. Grepped for references to project ID; there are a dozen or so but they're all either Releeph projects or Arcanist projects.
Reviewers: btrahan
Reviewed By: btrahan
CC: LegNeato, aran
Maniphest Tasks: T3660
Differential Revision: https://secure.phabricator.com/D6635
Summary: Ref T3655. Depends on D6633. This removes the writes and the column.
Test Plan: Created a project, edited a project. Verified the table doesn't have any keys including this column.
Reviewers: btrahan
Reviewed By: btrahan
CC: LegNeato, aran
Maniphest Tasks: T3655
Differential Revision: https://secure.phabricator.com/D6634
Summary: Ref T2769. I'm planning to keep this pretty simple, but we have this ad-hoc edit log for rules already and some other mess that we can clean up.
Test Plan: No effect yet; see future changes.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2769
Differential Revision: https://secure.phabricator.com/D6654
Summary: Email replies and subscribers seem to go hand in hand so deploy both at once.
Test Plan: played around with bin/mail. Verified replies posted comments on the paste.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3650
Differential Revision: https://secure.phabricator.com/D6682
This column has no default value and throws if you have maximum warnings activated:
EXCEPTION: (AphrontQueryException) #1364: Field 'commentVersion' doesn't have a default value...
Auditors: btrahan
Summary: Ref T3650. This adds a create transaction, transactions for metadata (title, langauge, view policy), and comments. Editor is used on all create /edit paths.
Test Plan: made some pastes via web and email - yay. edited pastes - yay. verified txns showed up on pastes and in feed correctly.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3516, T3650
Differential Revision: https://secure.phabricator.com/D6645
Summary: Ref T3578. I forget if this was an explicit decision or not, but we currently let the same user answer questions multiple times. I think this probably causes more confusion than it provides freedom. In conjunction with other UI issues (commenting being weird, notably), we're seeing some use of answers to comment, which is undesirable. Require each answer's author to be unique. Merge existing nonunique authors' answers.
Test Plan: {F52062}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3578
Differential Revision: https://secure.phabricator.com/D6605
Summary:
Fixes T3579
As a basic overview, this enables the author of a question to open/close a question.
Other bits;
- Add "Open" filter to the builtin queries
- Add "Status" to search form
- Refactor ponder constants
- Add coloured bars for different question statuses
Test Plan:
- Open/Close questions
- Search for some bits
- Use filters
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3579
Differential Revision: https://secure.phabricator.com/D6590
Conflicts:
src/infrastructure/storage/patch/PhabricatorBuiltinPatchList.php
Summary:
Now you can actually replace an image! Ref T3572. This ended up needing a wee bit of infrastructure to work...
- add replace image transaction to pholio
- add replacesImagePHID to PholioImage
- tweaks to editor to properly update images with respect to replacement
- add edges to track replacement
- expose getNodes on graph query infrastructure to query the entire graph of who replaced who
- move pholio image to new phid infrastructure
Still TODO - the history view should get chopped out a bit from the current view - no more inline comments / generally less functionality plus maybe a tweak or two to make this more sensical.
Test Plan: replaced images and played with history controller a little. works okay.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3572
Differential Revision: https://secure.phabricator.com/D6560
Summary: Fixes T3557. One thing which made T3557 kind of a mess was the lack of information about progress through temporary failures. Add a column which records a task's last failure time, and surface it in the console.
Test Plan: {F51277}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3557
Differential Revision: https://secure.phabricator.com/D6550
Summary: Ref T2715. Switch Maniphest to the new stuff.
Test Plan: Used `phid.query`; `phid.lookup` to load objects.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2715
Differential Revision: https://secure.phabricator.com/D6516
Summary:
See discussion in T2715. Currently, PHIDs are all hard coded in the PHID application. In the long run, we need to move them out into actual applications.
A specific immediate issue is Releeph, which uses a very very old and very broken mechanism to inject PHIDs in a way that only sort of works.
Moving forward, every PHID type will be provided by a `PhabricatorPHIDType` subclass, which will manage loading it, etc.
This also moves toward cleaning up the "load objects by name" (where "name" means something like `D12`) code, which is an //enormous// mess and spread across at least 4-5 callsites.
Test Plan: Used `phid.lookup` and `phid.query` to load Slowvotes.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6502
Summary:
Fixes T2675, T2676.
- when the last person leaves a project it is archived.
- a script to archive all memberless projects
- better feed stories for the various policy edits you can do
- phriction pages are also moved as you rename projects
Test Plan: edited some projects and noted reasonable feed stories. ran script against test data and it worked! left a last man standing project and it archived. renamed a project to "a" then "b" then "a" (etc) and it worked including phrictiondocument moves
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2676, T2675
Differential Revision: https://secure.phabricator.com/D6478
Summary:
Nice title. We add three new transactions - IMAGE_FILE, IMAGE_NAME, and IMAGE_DESCRIPTION. The first is a bit like subscribers as it is a list of file phids. The latter have values of the form ($file_phid => $data), where $data is $name or $description respectively. This is because we need to collate transactions based on $file_phid...
Overall, this uses the _underyling files_ and not the "PholioImage" to determine if things are unique or not. That said, simply mark PholioImages as obsolete so inline comments about no-longer applicable PholioImages don't break.
Does a reasonable job implementing the mock. Note you can't "update" an image at this time, though you can delete and add at will.
Test Plan: played with pholio a ton.
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, aran, Korvin
Maniphest Tasks: T3489
Differential Revision: https://secure.phabricator.com/D6441
Summary: Subscribing doesn't do anything yet, but you can subscribe!
Test Plan: {F50169}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6456
Summary:
Move comments from the old table to ApplicationTransactions. Patch dances around which objects it uses since I intend to delete the comment table.
NOTE: This temporarily disables comment writes. I'll restore them shortly.
Test Plan: {F50166}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6454
Summary: Schema changes to modernize this app.
Test Plan: Ran schema changes, created a new slowvote. No real effects yet.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6453
Summary: Fixes T3069. Ref T3516. For a long time, LDAP import added trailing whitespace to real names when importing them (for example, `"John Smith"` would be imported as `"John Smith "`). We no longer do this, but should clean up the database since it seems highly unlikely that any user wants trailing whitespace in their real name.
Test Plan:
$ ./bin/storage upgrade -f --apply phabricator:20130711.trimrealnames.php
Applying patch 'phabricator:20130711.trimrealnames.php'...
Trimming trailing whitespace from user real names...
Trimming user 1 from 'Evan Priestley ' to 'Evan Priestley'.
User 4 is already trim.
User 5 is already trim.
User 6 is already trim.
User 7 is already trim.
User 8 is already trim.
User 9 is already trim.
User 10 is already trim.
User 11 is already trim.
User 12 is already trim.
User 13 is already trim.
User 14 is already trim.
User 15 is already trim.
User 21 is already trim.
User 22 is already trim.
User 26 is already trim.
User 28 is already trim.
User 29 is already trim.
User 32 is already trim.
User 33 is already trim.
User 35 is already trim.
User 39 is already trim.
User 51 is already trim.
User 53 is already trim.
User 54 is already trim.
User 55 is already trim.
Done.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3069, T3516
Differential Revision: https://secure.phabricator.com/D6426
Summary: Fixes T3481. Sort of - this thing be very ugly. Also it assumes that you'll "always" want to sign terms. I was thinking in a future diff that should be optional as well as configurable, though it was unclear to me if either was worth pursuing... Generally very hideous as the three main elements (PHUIDocument, AphrontErrorView, and AphrontForm with an AphrontFormInset) have never really played together before.
Test Plan: agreed to some test terms. noted UI displayed nicely. reloaded and noted UI told me I had signed it already. Went to different terms and filled them out wrong and got sensical errors.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3481
Differential Revision: https://secure.phabricator.com/D6399
Summary: this let's the list controller save a query. Fixes T3488. Note didn't bother denormalizing document body at all since I don't think we want to show a snippet.
Test Plan: viewed a list of legalpad documents - yay. viewed a legalpad document - yay. created a legalpad document - yay. edited a legalpad document - yay. edited with N authors - yay.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3488
Differential Revision: https://secure.phabricator.com/D6382
Summary:
Supports !unsubscribe and commenting on replies. Subscribers get mailed something reasonable. Fixes T3480.
Sneaks in /LX/ support. In the near future I want to have that /LX/ be a clean "signature" page sans all the edit actions and other fluff... Will resolve this as part of T3481.
Test Plan: used the metamta console to add comments and unsubscribe. added a phlog() inside mail code to verify mail bodies looked okay.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3480
Differential Revision: https://secure.phabricator.com/D6369
Summary:
- Add GC support to conduit logs.
- Add Query support to conduit logs.
- Record the actual user PHID.
- Show client name.
- Support querying by specific method, so I can link to this from a setup issue.
@wez, this migration may not be fast. It took about 8 seconds for me to migrate 800,000 rows in the `conduit_methodcalllog` table. This adds a GC which should keep the table at a more manageable size in the future.
You can safely delete all data older than 30 days from this table, although you should do it by `id` instead of `dateCreated` since there's no key on `dateCreated` until this patch.
Test Plan:
- Ran GC.
- Looked at log UI.
- Ran Conduit methods.
Reviewers: btrahan
Reviewed By: btrahan
CC: wez, aran
Differential Revision: https://secure.phabricator.com/D6332
Summary:
Ref T3116. This is a large amount of schema for V0 but it seems relatively complete to the desired features in T3116.
The only thing of note that is missing is documentSignatures should have some sort of "signedStatus". "Un-signing" seemed weird to me, though I could imagination "pending signature". "Pending signature" could be done via edges pretty easily.
Plan is to have "Document" be at the top level and own policy. "DocumentBody" will store a version of title and text for each and every "edit" on a larger Document. "Edges" are to be used to tie Authors => Document for V0ish. Transactions are going to be used to store all the various edits possible here. Oh and DocumentSignatures will do what you expect, but include documentVersion as part of the key.
Test Plan: just some schema. `storage update` worked though!
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, aran, Korvin
Maniphest Tasks: T3116
Differential Revision: https://secure.phabricator.com/D6323
Summary:
Ref T2852. This table holds data about external objects and allows us to write edges to them.
Objects are identified with an `<applicationType, applicationDomain, objectType, objectID>` tuple. For example, Asana tasks will be, e.g., `<asana, asana.com, asana:task, 93829279873>` or similar.
Test Plan: Ran storage upgrade.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2852
Differential Revision: https://secure.phabricator.com/D6271
Summary:
Ref T2222. My path forward here wasn't very good -- I was thinking I could set `transactionPHID` for the inline comments as I migrated, but it must be unique and an individual DifferentialComment may have more than one inline comment. Dropping the unique requirement just creates more issues for us, not fewer.
So the migration in D6266 isn't actually useful. Undo it -- this can't be a straight revert because some installs may already have upgraded.
Test Plan: Ran new migrations, verified the world ended up back in the same place as before (made comments, viewed reivsions).
Reviewers: btrahan
Reviewed By: btrahan
CC: wez, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D6269
Summary:
Ref T2222. This adds PHIDs to all Differential comments so I can migrate the inlinecommment table to transaction_comment in the next diff.
@wez, this will issue a few million queries for Facebook (roughly, one for each Differential comment ever made). It's safe to skip the `.php` half of the patch, bring Phabricator up normally, and then apply this patch with Phabricator running if that eases the migration, although the next few diffs will probably be downtime-required migrations so maybe it's easier to just schedule some downtime.
Test Plan: Ran migration locally. Verified existing comments and new comments received PHIDs.
Reviewers: btrahan
Reviewed By: btrahan
CC: wez, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D6266
Summary:
Ref T2222. Ref T1460. Depends on D6260.
This creates the new tables, but doesn't start using them. I added three new fields for {T1460}, to represent fixed/done/replied states.
Test Plan: Ran storage upgrade.
Reviewers: btrahan
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T1460, T2222
Differential Revision: https://secure.phabricator.com/D6261
Summary: Ref T1536. This is the last major migration. Moves us over to the DB and drops all the config stuff.
Test Plan:
- Ran the migration.
- Saw all my old config brought forward and respected, with accurate settings.
- Ran LDAP import.
- Grepped for all removed config options.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran, wez
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6243
Summary:
Ref T1536. Currently, we have about 40 auth-related configuration options. This is already roughly 20% of our config, and we want to add more providers. Additionally, we want to turn some of these auth options into multi-auth options (e.g., allow multiple Phabricator OAuth installs, or, theoretically multiple LDAP servers).
I'm going to move this into a separate "Auth" tool with a minimal CLI (`bin/auth`) interface and a more full web interface. Roughly:
- Administrators will use the app to manage authentication providers.
- The `bin/auth` CLI will provide a safety hatch if you lock yourself out by disabling all usable providers somehow.
- We'll migrate existing configuration into the app and remove it.
General goals:
- Make it much easier to configure authentication by providing an interface for it.
- Make it easier to configure everything else by reducing the total number of available options.
Test Plan: Ran storage upgrade.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6196
Summary: Ref T1536. This is similar to D6172 but much simpler: we don't need to retain external interfaces here and can do a straight migration.
Test Plan: TBA
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6173
Summary: Ref T1536. Migrates the OAuthInfo table to ExternalAccount, and makes `PhabricatorUserOAuthInfo` a wrapper for an ExternalAccount.
Test Plan: Logged in with OAuth, registered with OAuth, linked/unlinked OAuth accounts, checked OAuth status screen, deleted an account with related OAuth.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6172
Summary:
Ref T1536. This is the schema code for `PhabricatorExternalAccount` which was previously in D4647. I'm splitting it out so I can put it earlier in the sequence and because it's simple and standalone.
Expands `PhabricatorExternalAccount` to have everything we need for the rest of registration.
Test Plan: Implemented the remainder of new registration on top of this.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6169
Summary:
Adds a profile edit controller (with just one field and on links to it) that uses ApplicationTransactions and CustomField.
{F45617}
My plan is to move the other profile fields to this interface and get rid of Settings -> Profile. Basically, these will be "settings":
- Sex
- Language
- Timezone
These will be "profile":
- Real Name
- Title
- Blurb
- Profile Image (but I'm going to put this on a separate UI)
- Other custom fields
Test Plan: Edited my realname using the new interface.
Reviewers: chad, seporaitis
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D6152
Summary:
Applications come with builtin queries, but users might want to get rid of them. Allow users to disable named queries if they prefer.
This has one funky behavior, which is that the first time you disable a named query it goes to the top of your list. That will be fixed in the next diff, which will make them reorderable.
Test Plan: Added/edited/removed named queries, disabled/enabled builtin named queries.
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D6128
Summary: Ref T988. Mostly backend changes, with a very rough frontend on top of them. See Conpherence discussion.
Test Plan: {F45010}
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T988
Differential Revision: https://secure.phabricator.com/D6113
Summary: Ref T2625. Ref T1163. A couple of small generalization nudges, but this is almost entirely straightforward.
Test Plan: Executed various File queries.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1163, T2625
Differential Revision: https://secure.phabricator.com/D6091
Summary:
Ref T2625. Ref T3273. This is mostly a UI foil for T3273. Right now, to find tasks without owners or without projects you search for the magic strings "upforgrabs" and "noproject". Unsurprisingly, no users have ever figured this out. I want to get rid of it. Instead, these interfaces will look like:
Assigned: [ Type a user name... ]
[ X ] Find unassigned tasks.
Projects: [ Type a project name... ]
[ X ] Find tasks with no projects.
Seems reasonable, I think?
Test Plan: Searched for "rainbow, js", "rainbow + no language", "no language", date ranges, etc.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T2625, T3273
Differential Revision: https://secure.phabricator.com/D6085
Summary:
Ref T1163. Ref T2625. This could probably use some tweaks, but I kept things mostly-generic.
I added a new control for freeform dates so we can have it render help or whatever later on.
Test Plan: See screenshots.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2625, T1163
Differential Revision: https://secure.phabricator.com/D6084
Summary:
This prevents security by obscurity.
If I have read-only access to the database then I can pretend to be any logged-in user.
I've used `PhabricatorHash::digest()` (even though we don't need salt as the hashed string is random) to be compatible with user log.
Test Plan:
Applied patch.
Verified I'm still logged in.
Logged out.
Logged in.
$ arc tasks
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6080
Summary:
Currently, the author of an image macro is read from the attached file. This is messy and necessitates a join, and is not always correct. Instead, store the data when the macro is created.
This lays the groundwork for generalizing ApplicationSearch here. Ref T2625.
Test Plan: Migrated existing macros, created a new macro, checked web UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2625
Differential Revision: https://secure.phabricator.com/D6071
Summary:
Ref T2231, T603. Plan of attack here is pretty much:
- Built out a new (currently not linked in the UI) edit interface in Diffusion which is transaction-based and has a sensible layout.
- Build out a new create interface based on PagedForm which dumps into the new edit interface.
- Throw the old stuff away.
- Everyone lives happily ever after.
Test Plan:
{F44163}
{F44164}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D6029
Summary: If we're unassigning an owner from a task it should set the column to `NULL` rather than an empty string. Fixes T3239
Test Plan: Assigned and Unassigned a task. Make sure the db is doing as excpected. Ran the patch, checked the db.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T3239
Differential Revision: https://secure.phabricator.com/D6017
Summary:
removes the whole custom image thing, instead using a more standard application crumbs. Gives this glorious space back to the compose area which is now tens of pixels taller. Also defaults it to the people widget. Basically, fixes T3160.
For now, you **CAN NOT** edit the title of a conpherence. I didn't want to jam in too much here. Next diff will be to change the widget icons into the dropdown switcher, which will also bring back the editing of titles.
Test Plan: looked at conpherence and it was pretty. Resized it vigorously and it wasn't too bad.
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, aran, Korvin
Maniphest Tasks: T3160
Differential Revision: https://secure.phabricator.com/D5998
Summary:
Ref T988. This adds basics for the non-static publishing target:
- Storage (called "Live", e.g. `DivinerLiveAtom` to distinguish it from shared classes like `DivinerAtom`).
- Mostly populate the storage.
- Some minor fixes and improvements.
Test Plan: Generated docs, looked at DB, saw mostly-sensible output.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T988
Differential Revision: https://secure.phabricator.com/D5973
Summary:
We/I broke a couple of things here recently (see D5911) and are doing some work here in general (see D5912, etc.).
Generally, this code is pretty oldschool and not especially well architected for modern application-oriented Phabricator. It hardcodes a lot of stuff which should be applications' responsibilites.
Take the first steps toward making it more solid to reduce the risk here. In particular:
- Factor out the "self mail" and "duplicate mail" checks and add unit tests.
- Make Message-ID hash handling automatic.
Test Plan: Ran unit tests.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D5915
Summary:
Migrate to `PhabricatorApplicationTransactions` (`ReleephRequestTransactions` applied by `ReleephRequestTransactionalEditor`, instead of `ReleephRequestEvents` created by `ReleephRequestEditor`) and migrate all the old events into transactions. Email is supported in the standard way (no more `ReleephRequestMail`) as well.
This also collapses the Releeph request create and edit controllers into one class, as well as breaking everyone's subject-based mail rules by standardising them (but which should be more easily filtered by looking at headers.)
Test Plan:
* Make requests, then pick them.
* Pick and revert the same request so that discovery happens way after `arc` has told Releeph about what's been happening.
* Try to pick something that fails to pick in a project with pick instructions (and see the instructions are in the email.)
* Load all of FB's Releeph data into my DB and run the `storage upgrade` script.
* Request a commit via the "action" in a Differential revision.
Reviewers: epriestley
Reviewed By: epriestley
CC: epriestley, aran, Korvin, wez
Maniphest Tasks: T3092, T2720
Differential Revision: https://secure.phabricator.com/D5868
Summary: Can name saved queries.
Test Plan: Try naming some saved queries using the form.
Reviewers: epriestley
CC: aran, Korvin, AnhNhan
Maniphest Tasks: T2625
Differential Revision: https://secure.phabricator.com/D5878
Conflicts:
src/infrastructure/storage/patch/PhabricatorBuiltinPatchList.php
Summary: Adding mail-keys; required for `PhabricatorApplicationTransaction` support.
Test Plan: Upgrade an old database with this patch, observe the matrix: {F42620}
Reviewers: wez, epriestley
Reviewed By: epriestley
CC: epriestley, aran
Maniphest Tasks: T2720
Differential Revision: https://secure.phabricator.com/D5852
Summary:
Removing a bunch of cache-style columns from `ReleephRequest`, where it's actually much easier to just load the information at runtime.
This makes sense for migrating to `PhabricatorApplicationTransactions`, where each xaction changes one aspect of a `ReleephRequest` at a time (rather than multiple columns at once.)
Test Plan: Request something, run `arc releeph` and watch the picks, pass on some RQs, run `arc releeph` and watch the reverts.
Reviewers: wez, epriestley
Reviewed By: epriestley
CC: epriestley, aran
Maniphest Tasks: T2720
Differential Revision: https://secure.phabricator.com/D5851
Summary:
countdown_timer table named to countdown.
datepoint and related stuff renamed to epoch.
Countdowns now have phids.
Various UI items changed from timer to countdown.
Test Plan: Did run storage upgrade and added some countdowns.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, AnhNhan
Maniphest Tasks: T2624
Differential Revision: https://secure.phabricator.com/D5812
Summary: Enable saved query objects to actually be saved to the database.
Test Plan: Insert a call to save() and check that the query is written correctly.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, AnhNhan
Maniphest Tasks: T2625
Differential Revision: https://secure.phabricator.com/D5775
Conflicts:
src/infrastructure/storage/patch/PhabricatorBuiltinPatchList.php
Summary: this is D5750 but just the conpherence part. fixes a few random conpherence bugs / quirks as well. Also messes with ApplicationTransactionEditor to expose the xactions so Conpherence doesn't over-update participation rows. Fixes T2429.
Test Plan: set LIMIT to 3. verified I could scroll down all conpherences. next, picked a conpherence "in the middle" to load. verified I could page up and down. next, picked a conpherence in the middle then had another user update that conpherence. verified as I paged up the conpherence re-loaded properly selected
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, aran, Korvin, vrana
Maniphest Tasks: T2429
Differential Revision: https://secure.phabricator.com/D5783
Summary:
This has no real behavioral changes (except better error handling), it just factors things out to be a bit cleaner. In particular:
- Move more shared form behaviors into the common JS form component.
- Move more error handling into shared pathways.
- Make the specialized Stripe / Balanced methods do less work.
This needs some more polish for nontrival errors (especially on the Balanced side) but none of the error behavior is worse than it was and a lot of it is much better.
Ref T2787.
Test Plan: Hit all invalid form errors, added valid payment methods with Stripe and Balacned.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D5771
Summary: Sql Patch to rename the externalaccount table to user_externalaccount and to add dateCreated, dateModified fields to the updated table.
Test Plan: {F41442}
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, AnhNhan
Differential Revision: https://secure.phabricator.com/D5770
Summary: Created PhabricatorExternalAccount class with only data members. Will discuss with you regarding the necessary functions to be implemented in this class. Sql Patch to create a new table for external_accounts. Will I have to write unit tests the new storage object? Sending you this diff so that you can comment on this to further improve :).
Test Plan: {F40977}
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, AnhNhan
Maniphest Tasks: T1536, T1205
Differential Revision: https://secure.phabricator.com/D5724
Summary: Migration doesn't delete differential.revisionPHID but maybe it should?
Test Plan: Reparsed commit, ran the migration, deleted differential.revisionPHID, looked at task with attached commit with attached revision.
Reviewers: epriestley, edward
Reviewed By: epriestley
CC: aran, Korvin, AnhNhan
Differential Revision: https://secure.phabricator.com/D5634
Summary: this just does the back-end migration. I realized that we don't need to keep track of cacheTitle and cachePhoto since those are based off recent participation handles and dynamic relative to who is viewing it. Also kept the "last seen phid" as I think that will be useful to have auto-scroll to where you last read. Ref T2867.
Test Plan: did the migration. observed sensical values in the database. created a new conpherence - again sensical values. updated a conpherence - more sensical values.
Reviewers: epriestley, chad
Reviewed By: epriestley
CC: aran, Korvin, AnhNhan
Maniphest Tasks: T2867
Differential Revision: https://secure.phabricator.com/D5567
Summary: Add pagination to leader board. Add key on token count in db.
Test Plan: Set page size to 1 and give tokens to two tasks.
Reviewers: epriestley, AnhNhan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5513
Summary:
Added the initial storage structure (DB tables and DAO classes)
for Phrequent.
Test Plan:
Apply the patch and run `bin/storage upgrade`. It should
complete successfully.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2857
Differential Revision: https://secure.phabricator.com/D5476
Summary:
Ref T2787. A product is the abstract representation of something you can buy or rent/subscribe to. Although the interface isn't locked down yet, this would ultimately be internal/administrative.
Products likely have some user-facing skin on top of them: plans would have a purchasing/comparison flow, physical goods would have a storefront, etc., so products don't have any information like descriptions or images, just the data that Phortune needs to correctly bill accounts.
Generally, this is very basic for the moment.
Test Plan:
{F37594}
{F37595}
{F37596}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D5441
Summary:
Hook @btrahan's Stripe form to the rest of Phortune.
- Users can add payment methods.
- They are saved to Stripe and associated with PhortunePaymentMethods on our side.
- Payment methods appear on account overview.
Test Plan:
{F37548}
{F37549}
{F37550}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D5438
Summary:
Ref T2787. This does very little so far, but makes inroads on accounts and billing. This is mostly just modeled on what Stripe looks like. The objects are:
- **Account**: Has one or more authorized users, who can make manage the account. An example might be "Phacility", and the three of us would be able to manage it. A user may be associated with more than one account (e.g., a corporate account and a personal account) but the UI tries to simplify the common case of a single account.
- **Payment Method**: Something we can get sweet sweet money from; for now, a credit card registered with Stripe. Payment methods are associated with an account.
- **Product**: A good (one time charge) or service (recurring charge). This might be "t-shirt" or "enterprise plan" or "hourly support" or whatever else.
- **Purchase**: Represents a user purchasing a Product for an Account, using a Payment Method. e.g., you bought a shirt, or started a plan, or purchased support.
- **Charge**: Actual charges against payment methods. A Purchase can create more than one charge if it's a plan, or if the first charge fails and we re-bill.
This doesn't fully account for stuff like coupons/discounts yet but they should fit into the model without any issues.
This only implements `Account`, and that only partially.
Test Plan: {F37531}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D5435
Summary: Introduces a new settings panel for Conpherence specific settings.
Test Plan:
started a thread with a test user, thus two participants total. Replied to conpherence, toggling notification settings in between. Verified 1 or 2 emails were sent as appropos to the current toggle.
Toggled global setting and verified setting was updated in conpherences where nothing was specified. Verified setting conpherence setting overrides global setting.
Reviewers: epriestley, chad
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2521
Differential Revision: https://secure.phabricator.com/D5391
Summary:
Fixes T2694
added edge infrastructure for Phriction
added mail subject prefix option for Phriction
added messy mail support for subscribers
adds edges to the phriction db, along with the subscriber interface
which gives us subscriptions for free.
simple display of subscribers, adequate to the current design and
sufficient fallbacks for exceptional cases. @chad may
be mailed about that one more UI element may be added to his redesign
mail support is messy. not generic at all. only sends to subscribed non-authors.
Test Plan:
tried out all kinds of stuff. applied patch, subscribed, unsubscribed with multiple
accs. verified proper
edited documents, verified that mail was sent in MetaMTA. Verified
contents, tos and stuff by looking into the db, comparing PHIDs etc.
functional testing per serious MTA (that is, AWS SES) worked wonderfully.
Here's how the subscription list looks like:
{F36320, layout=link}
Reviewers: epriestley, chad, btrahan
Reviewed By: epriestley
CC: hfcorriez, aran, Korvin
Maniphest Tasks: T2686, T2694
Differential Revision: https://secure.phabricator.com/D5372
Conflicts:
src/infrastructure/storage/patch/PhabricatorBuiltinPatchList.php
Summary: Added a column called explicit_upload to Phabricator_File.file table
Test Plan: By chekcing locally if the the column has been added in table using mysql commands.
Reviewers: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5384
Test Plan:
Applied the patch.
Looked at blame and plain blame of SVN and Git file.
Ran the lint saver.
Looked at lint messages list.
/diffusion/lint/
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5218
Test Plan:
Store large amounts of text into a string auxiliary field. It should
be stored successfully rather than truncated.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2575
Differential Revision: https://secure.phabricator.com/D5246
Summary:
Move Diffusion to be hovercard-ready, and expand our ability to resolve commit references.
- Link unqualified hashes of 7 characters or more which match a commit.
- Link qualified hashes of 5 characters or more which match a commit.
- Support `{...}` syntax.
Test Plan: {F33896}
Reviewers: chad, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D5121
Summary:
The last commit broke update_phabricator.sh for me when it tried to migrate channel names into its own table.
It's a fairly straight forward patch and I'm almost certain I fixed it correctly. :)
Test Plan: Made small changes, ran update_phabricator.sh, repeat until the errors went away.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5116
Summary: Deleted the channel field and added a sql patch to drop the channel field.
Test Plan: I have messed up my local mysql:P, hence by storage upgrade is failing. Anyways, The chatlog_event table shouldn't contain the channel column now.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5011
Test Plan: Ran it on test DB.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5061
Summary:
Fixes T2563. Instead of rendering "rPnnnnnn", render "rPnnnnnn: add feature X". Tweak Audit tables to accommodate.
@vrana / @nh, this migration might take a while. You could safely skip it when deploying and then run it after deployment.
I think I fixed all the other places where these render, but might have missed something.
Test Plan:
- Ran first schema migration, clicked around to make sure nothing broke.
- Ran `scripts/repository/reparse.php --message rXyyyyy`, verified summary populated.
- Ran second migration.
- Checked task/diffusion/audit/differential for weird rendering.
Reviewers: vrana
Reviewed By: vrana
CC: nh, aran, chrisbolt, allixsenos
Maniphest Tasks: T2563
Differential Revision: https://secure.phabricator.com/D5012
Summary: Added ttl field to files. Gabage collect files with expired ttl
Test Plan: created file with a ttl. Let garbage collector run
Reviewers: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4987
Summary: Fixes T2559 with an incredibly original patch which I came up with myself.
Test Plan:
$ ./bin/storage upgrade -f
Applying patch 'phabricator:20130218.longdaemon.sql'...
Storage is up to date. Use 'storage status' for details.
Reviewers: edward
Reviewed By: edward
CC: aran
Maniphest Tasks: T2559
Differential Revision: https://secure.phabricator.com/D5006
Summary: Php schema patch to update channel id's of past events.
Test Plan: Having some proxy issues here due to which connection is timing out and bot is not able to log into IRC. Bot connects to IRC in my home though ! So I wasn't able to quite to test this by running storage upgrade.
Reviewers: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5000
Summary: We currently garbage collect general cache entries after a set period of time (30 days by default), but the recent changes to DarkConsole have left us writing a lot of large, short-TTL data to the cache. In addition to a maximum age, GC cache entires after they TTL out.
Test Plan: Ran GC daemon, saw TTL'd entries get collected. Inserted a TTL'd entry, saw it get collected by GC. Saw non-ttl'd entries not get collected.
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4990
Summary: Added a column channelID column to phabricator_chatlog.chatlog_event
Test Plan: Checked through mysql to see if table is updated
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4956
Summary: Added 20130214.chatlogchannel.sql in resources/sql/patches to add a new table
Test Plan: Hmmmmm .......
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4952
Summary:
mainly, this adds the image cropper - yay!
- also removes the file image from the handle stuff I added in V1. now we do all this crazy photo stuff.
Test Plan:
- uploaded a photo by dragging to header and noted 120 x 80 showed up on reload
- uploaded a photo by dragging to edit dialogue spot and noted 120 x 80 showed up on reload
- cropped a photo - noted it cropped right
- cropped a photo again and again and again - seems like it crops okay
Reviewers: epriestley, chad
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2418, T2399
Differential Revision: https://secure.phabricator.com/D4790
Test Plan: Ran the migration on a single revision, verified DB, called `loadUnsubscribedPHIDs()`.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4786
Summary: it's ugly. but it works. basically. See T2399 for a roughly prioritized list of what still needs to happen.
Test Plan:
- created a conpherence with myself from my profile
- created a conpherence with myself from "new conpherence"
- created a conphernece with another from "new conpherence"
- created a conpherence with several others
- created a conpherence with files in the initial post
- verified files via comment text ("{F232} is awesome!") and via traditional attach
- edited a conpherence image
- verified it showed up in the header and in the conpherence menu on the left
- edited a conpherence title
- verified it showed up in the header and in the conpherence menu on the right
- verified each widget showed up when clicked and displayed the proper data
- calendar being an exception since it sucks so hard right now.
Reviewers: epriestley, chad
Reviewed By: epriestley
CC: aran, epriestley, chad, codeblock, Korvin
Maniphest Tasks: T2301
Differential Revision: https://secure.phabricator.com/D4620
Summary:
Patches often read from slaves (possibly stale data) and use that information to write on master.
It causes problems when applying more patches quickly after each other because data created in previous patch may not be replicated yet.
Test Plan:
$ bin/storage upgrade
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4483
Summary: Also provide a way to update old files metadata.
Test Plan: Create a revision which includes a image file. Check whether the widht, height metadata exists. Run `scripts/files/manage_files.php metadata --all` to update previously uploaded files.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2101
Differential Revision: https://secure.phabricator.com/D4347
Summary: this can happen if you have Phabricator and email lists co-mingling such that Phabricator receives an email multiple times. we can prevent this from then spamming everyone or otherwise taking the action multiple times by storing a message id hash and dropping the message if we have more than one message that matches.
Test Plan: simulated sending the same email multiple times on the command line. noted only the first one made it through.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1726
Differential Revision: https://secure.phabricator.com/D4328
Summary: Use ApplicationTransactions in Config to create an edit history. Resolves T2256.
Test Plan: {F28477}
Reviewers: btrahan, codeblock
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2256
Differential Revision: https://secure.phabricator.com/D4314
Summary:
This is somewhat clowny, particularly in how it handles JSON encode/decode, but
I've commented why I did things the way I did. The goal is to store minified JSON
but show pretty-printed JSON where possible, to the user editing it.
Test Plan:
* Went to /config/ and saw a list of keys from the `default` config.
* Clicked on one of them, submitted the default value successfully.
* Changed the value to invalid JSON and got a decent error.
* Changed the value to valid JSON and checked the DB to confirm it saved.
* Confirmed the DB values were minified.
* Confirmed the user-facing values were pretty-printed where they could be.
* Confirmed that PHIDs were getting assigned properly and that isDeleted
properly defaulted to false/0.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2246
Differential Revision: https://secure.phabricator.com/D4290
Summary:
See discussion in D4204. Facebook currently has a 314MB remarkup cache with a 55MB index, which is slow to access. Under the theory that this is an index size/quality problem (the current index is on a potentially-384-byte field, with many keys sharing prefixes), provide a more general index with fancy new features:
- It implements PhutilKeyValueCache, so it can be a component in cache stacks and supports TTL.
- It has a 12-byte hash-based key.
- It automatically compresses large blocks of data (most of what we store is highly-compressible HTML).
Test Plan:
- Basics:
- Loaded /paste/, saw caches generate and save.
- Reloaded /paste/, saw the page hit cache.
- GC:
- Ran GC daemon, saw nothing.
- Set maximum lifetime to 1 second, ran GC daemon, saw it collect the entire cache.
- Deflate:
- Selected row formats from the database, saw a mixture of 'raw' and 'deflate' storage.
- Used profiler to verify that 'deflate' is fast (12 calls @ 220us on my paste list).
- Ran unit tests
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4259
Summary:
Split Pholio's transaction implementation into generic and application-specific parts. Moves us toward generic transactions, with support for:
- Editing and deleting comments.
- Setting visibility of individual comments (I'm not a fan of this feature but we'll see).
I want to move everything to a more generic piece of infrastructure but there's very little they can share right now so adding transactions to, e.g., Paste or Macros (T2157) means massive amounts of similar code.
Tons of work left to do here, but I think it basically works. Here's a screenshot:
{F26820}
Test Plan: Made transactions in Pholio.
Reviewers: btrahan, vrana, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2104
Differential Revision: https://secure.phabricator.com/D4136
Summary:
I'm not going to land this until it's a bit more fleshed out since it would just confuse users, but this is probably more reviewable as a few diffs adding a couple features than one ULTRA-diff adding everything. Implement application basics for Pholio. This does more or less nothing, but adds storage, subscribe, flag, markup, indexing, query basics, PHIDs, handle loads, a couple of realy really basic controllers, etc.
Basic hierarchy is:
- **Moleskine**: Top-level object like a Differential Revision, like "Ponder Feed Ideas".
- **Image**: Each Moleskine has one or more images, like the unexpanded / expanded / mobile / empty states of feed.
- **Transaction**: Comment or edit, like Maniphest. I generally want to move most apps to a transaction model so we can log edits.
- **PixelComment**: Equivalent of an inline comment.
Test Plan: Created a fake object and viewed it.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran, davidreuss
Maniphest Tasks: T2097
Differential Revision: https://secure.phabricator.com/D3817
