Summary: Ref T11120. If this works, I'll just remove this option completely.
Test Plan: ¯\_(ツ)_/¯
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11120
Differential Revision: https://secure.phabricator.com/D16095
Summary: "All Tasks" is bad in the long run and not clearly better for new installs.
Test Plan: Created a new smiple template, saw open tasks only.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16093
Summary: Ref T10227. When we perform `git` http operations (fetch, mirror) check if we should use a proxy; if we should, set `http_proxy` or `https_proxy` in the environment to make `git` have `curl` use it.
Test Plan:
- Configured a proxy extension to run stuff through a local instance of Charles.
- Ran `repository pull` and `repository mirror`.
- Saw `git` HTTP requests route through the proxy.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10227
Differential Revision: https://secure.phabricator.com/D16092
Summary: Ref T11123. This implements a very basic skeleton for modern revision search.
Test Plan: Viewed and executed Conduit API method.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11123
Differential Revision: https://secure.phabricator.com/D16089
Summary: Ref T6523. Allows you to click stuff instead of using drag-and-drop.
Test Plan: On iOS simulator, created and updated a mock.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6523
Differential Revision: https://secure.phabricator.com/D16088
Summary: Fixes T10886. This should get more formal some day, but just fix it for now.
Test Plan: Reloaded mock with other unpublished draft inlines, saw accurate count.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10886
Differential Revision: https://secure.phabricator.com/D16087
Summary: Fixes T11115, but unclear how to test this. I think I've asked this in the past.
Test Plan:
- Visit Applications -> Ponder
- Configure external email
- Test External Email
- See new Question
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11115
Differential Revision: https://secure.phabricator.com/D16084
Summary: Ref T4280. At some point (probably D15732) we started getting anchor parsing wrong. Just pop the anchor off before doing all the logic, then put it back on at the end.
Test Plan:
Tested various forms like:
```
[[ x ]]
[[ x | z ]]
[[ x#y | z ]]
[[ ./x#y | z ]]
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4280
Differential Revision: https://secure.phabricator.com/D16083
Summary: Fixes T11113. On the 2nd+ page, we could end up with an ambiguous `id` WHERE clause because we don't define a primary table alias on this query. Define one.
Test Plan:
Changed SearchEngine to return pages of size 5, searched for my threads, toggled to second page, no exception.
Used DarkConsole to examine that second-page query, saw that it had `thread.id` explicitly instead of `id` implicitly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11113
Differential Revision: https://secure.phabricator.com/D16080
Summary:
Via HackerOne. This page fatals if accessed directly while logged out.
The "shouldRequireLogin()" check is wrong; this is a logged-in page.
Test Plan:
Viewed the page while logged out, no more fatal.
Faked my way through the actual verification flow.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16077
Summary: Fixes T11107. The URI change here meant we were dropping the "key" parameter, which allows you to set a new password without knowing your old one.
Test Plan: Reset password, didn't need to provide old one anymore.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11107
Differential Revision: https://secure.phabricator.com/D16075
Summary: Ref T6916. Added video to remarkup using D7156 as reference.
Test Plan:
- Viewed video files (MP4, Ogg) in Safari, Chrome, Firefox (some don't work, e.g., OGG in Safari, but nothing we can really do about that).
- Used `alt`.
- Used `autoplay`.
- Used `loop`.
- Used `media=audio`.
- Viewed file detail page.
Reviewers: nateguchi2, chad, #blessed_reviewers
Reviewed By: chad, #blessed_reviewers
Subscribers: asherkin, ivo, joshuaspence, Korvin, epriestley
Tags: #remarkup
Maniphest Tasks: T6916
Differential Revision: https://secure.phabricator.com/D11297
Summary:
Fixes T10402.
I tried about 50 variations on the wording and notification layout, this seemed by far the most reasonable.
Didn't implement a way to ignore the warning, which might be required - but figured this is serious and broken enough while being completely invisible 99% of the time that it's worth shouting about.
Test Plan: Messed around with $_SERVER['HTTPS'] on the server side and client_uri on the client side - saw reasonable results in all combinations.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Maniphest Tasks: T10402
Differential Revision: https://secure.phabricator.com/D16064
Summary:
Ref T11098. This primarily fixes Conduit calls to `*.edit` methods failing when trying to access user preferences.
(The actual access is a little weird, since it seems like we're building some UI stuff inside a policy query, but that's an issue for another time.)
To fix this, consolidate the "we're about to run some kind of request with this user" code and run it consistently for web, conduit, and SSH sessions.
Additionally, make sure we swap things to the user's translation.
Test Plan:
- Ran `maniphest.edit` via `arc call-conduit`, no more settings exception.
- Set translation to ALL CAPS, got all caps output from `ssh` and Conduit.
Reviewers: avivey, chad
Reviewed By: chad
Maniphest Tasks: T11098
Differential Revision: https://secure.phabricator.com/D16066
Summary:
Ran into this while fixing T11098#179088.
The "Transaction Type" details in the conduit autogenerated documentation for `*.edit` endpoints still wraps incorrectly.
Test Plan: Purged remarkup cache, reloaded page, got full-width text.
Reviewers: avivey, chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16065
Summary:
Ref T7643.
- When a transaction edits a text block, add a link to the changes (for HTML mail).
- Also, inline the changes in the mail (for HTML mail).
- Do nothing for text mail since I don't think we really have room? And I don't know how we can make the diff look any good.
Test Plan:
Edited a task description, generated mail, examined mail.
- It contained a link leading to a prose diff.
- It had a more-or-less reasonable inline text diff.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7643
Differential Revision: https://secure.phabricator.com/D16063
Summary:
Ref T10785. Around the time we launched Phacility SAAS we implemented this weird autologin hack. It works fine, so clean it up, get rid of the `instanceof` stuff, and support it for any OAuth2 provider.
(We could conceivably support OAuth1 as well, but no one has expressed an interest in it and I don't think I have any OAuth1 providers configured correctly locally so it would take a little bit to set up and test.)
Test Plan:
- Configured OAuth2 adapters (Facebook) for auto-login.
- Saw no config option on other adapters (LDAP).
- Nuked all options but one, did autologin with Facebook and Phabricator.
- Logged out, got logout screen.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10785
Differential Revision: https://secure.phabricator.com/D16060
Summary:
Ref T10856. The rendering logic was already there, but it was expecting the information under `properties`
field, whereas arc puts it under `metadata`. Not sure if that something that changed a long time ago or if
it was always like this.
Test Plan: {F1252657 size=full}
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T10856
Differential Revision: https://secure.phabricator.com/D15828
Summary:
Ref T3353. This hooks the prose engine up to the UI and throws away the hard-wrapping hacks.
These are likely still very rough in many cases, but are hopefully a big step forward from the old version in the vast majority of cases.
Test Plan: {F1677809}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T3353
Differential Revision: https://secure.phabricator.com/D16056
Summary:
Fixes T11088. When a task is removed from a project, we don't normally delete its column positions. If you accidentally remove a project and then restore the project, it's nice for the task to stay where you put it.
However, we do need to remove its positions in proxy columns to avoid the issue in T11088.
Test Plan:
- Added a failing unit test, made it pass.
- Added a task to "X > Milestone 1", loaded workboard, used "Edit Projects" to move it to "X" instead, loaded workboard.
- Before, it stayed in the "Milestone 1" column.
- After, it moves to the "Backlog" column.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11088
Differential Revision: https://secure.phabricator.com/D16052
Summary:
Ref T11098.
- Allow "Editor" to be set to the empty string.
- Don't match a validation error to a field unless the actual settings for the field and error match.
Test Plan:
- Tried to set "Editor" to "", success.
- Tried to set "Editor" to "javascript://", only that field got marked "Invalid".
Reviewers: avivey, chad
Reviewed By: chad
Maniphest Tasks: T11098
Differential Revision: https://secure.phabricator.com/D16051
Summary: Ref T11098. Template preferences don't have a user, but this codepath didn't get fully updated to account for that.
Test Plan: Saved mail tags in global prefernces.
Reviewers: avivey, chad
Reviewed By: chad
Maniphest Tasks: T11098
Differential Revision: https://secure.phabricator.com/D16050
Summary:
Ref T11098. We have a fair number of these, including links in email, which we can't turn into explicit `/user/` URIs.
Just redirect them to the modern places.
Test Plan: Clicked "Customize Menu..." on home page.
Reviewers: chad, avivey
Reviewed By: avivey
Subscribers: avivey
Maniphest Tasks: T11098
Differential Revision: https://secure.phabricator.com/D16049
Summary:
Ref T4103. This just adds a single global default setting group, not full profiles.
Primarily, I'm not sure how administrators are supposed to set profiles for users, since most ways user accounts get created don't really support setting roles.. When we figure that out, it should be reasonably easy to extend this. There also isn't much of a need for this now, since pretty much everyone just wants to turn off mail.
Test Plan:
- Edited personal settings.
- Edited global settings.
- Edited a bot's settings.
- Tried to edit some other user's settings.
- Saw defaults change appropriately as I edited global and personal settings.
{F1677266}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16048
Summary:
Ref T4103. If the database has `""` (empty string) for select/option settings, we can let that value be effective in the UI right now.
One consequence is that timestamps can vanish from the UI.
Instead, be stricter and discard it as an invalid value.
Test Plan:
- Forced `time-format` setting to `''`.
- Saw timestamps vanish before change.
- Saw timestamps return to the default value after change.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16047
Summary:
Ref T4103. Two small improvements:
- Don't work as hard to validate translations. We just need to know if a translation exists, we don't need to count how many strings it has and build the entire menu.
- Allow `getUserSetting()` to work on any setting without doing all the application/visibility checks. It's OK for code to look at, say, your "Conpherence Notifications" setting even if that application is not installed for you.
Test Plan: Used XHProf and saw 404 page drop from ~60ms to ~40ms locally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16046
Summary:
Ref T10077. Currently, we issue 6+ queries on every page to build this menu, since the menu is built application-by-application.
Build the menu with dedicated modules instead so a single "EditEngine" module can provide all of them with one query.
I'd like to reduce this to 0 queries but I'm not totally sure what we want to do with this menu.
This change removes these items, because EditEngine can not currently provide them:
- Calendar: Eventually via EditEngine eventually.
- Conpherence: Probably via EditEngine, doesn't seem too important.
- People: Maybe via EditEngine, doesn't seem too important? "Welcome" is likely better?
- Pholio: Eventually via EditEngine.
It adds a bunch of other items as a side effect:
{F1677151}
This reduces the queries issued on every page by ~5.
This also makes quick create actions visible while logged out (see T7073).
Test Plan:
- Viewed menu while logged in.
- Viewed menu while logged out.
- Viewed standalone version of menu.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10077
Differential Revision: https://secure.phabricator.com/D16045
Summary:
Ref T10078. Currently, you toggle DarkConsole and then load a page, but on the load we have to refill your settings cache since toggling DarkConsole dirtied it.
This is fine, except that it makes it harder to understand what's going on with queries on a page. Just force it to reload right away instead.
Test Plan: Toggled DarkConsole, reloaded page, no longer saw settings toggle-related cache fill.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10078
Differential Revision: https://secure.phabricator.com/D16044
Summary: Ref T4103. Ref T10078. We currently have separate "usable" and "raw" values, but can simplify this by making `newValueForUsers()` return the raw value.
Test Plan: Ran unit tests; browsed around; dropped caches and browsed around.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103, T10078
Differential Revision: https://secure.phabricator.com/D16043
Summary:
Ref T4103. Ref T10078. This puts a user cache in front of notification and message counts.
This reduces the number of queries issued on every page by 4 (2x building the menu, 2x building Quicksand data).
Also fixes some minor issues:
- Daemons could choke on sending mail in the user's translation.
- No-op object updates could fail in the daemons.
- Questionable data access pattern in the file query coming out of the profile file cache.
Test Plan:
- Sent myself notifications. Saw count go up.
- Cleared them by visiting objects and clearing all notifications. Saw count go down.
- Sent myself messages. Saw count go up.
- Cleared them by visiting threads. Saw count go down.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103, T10078
Differential Revision: https://secure.phabricator.com/D16041
Summary:
Ref T4103. Ref T10078. This moves profile image caches to new usercache infrastructure.
These dirty automatically based on configuration and User properties, so add some stuff to make that happen.
This reduces the number of queries issued on every page by 1.
Test Plan: Browsed around, changed profile image, viewed as self, viewed as another user, verified no more query to pull this information on every page
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103, T10078
Differential Revision: https://secure.phabricator.com/D16040
Summary:
Ref T4103. Ref T10078. Currently, when a user misses a cache we just build it for them.
This is the behavior we want for the the viewer (so we don't have to build every cache up front if we don't actually need them), but not the right behavior for other users (since it allows performance problems to go undetected).
Make inline cache generation strict by default, then make sure all the things that rely on cache data request the correct data (well, all of the things identified by unit tests, at least: there might be some more stuff I haven't hit yet).
This fixes test failures in D16040, and backports a piece of that change.
Test Plan: Identified and then fixed failures with `arc unit --everything`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103, T10078
Differential Revision: https://secure.phabricator.com/D16042
Summary: Ref T4103. This method has no more callers.
Test Plan: `grep`
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16039
Summary:
Ref T4103. This isn't completely perfect but should let us move forward without also expanding scope into "too much mail".
I split the existing "Mail Preferences" into two panels: a "Mail Delivery" panel for the EditEngine settings, and a "2000000 dropdowns" panel for the two million dropdowns. This one retains the old code more or less unmodified.
Test Plan:
- Ran unit tests, which cover most of this stuff.
- Grepped for all removed constants.
- Ran migrations, inspected database results.
- Changed settings in both modified panels.
- This covers a lot of ground, but anything I missed will hopefully be fairly obvious.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16038
Summary: Ref T4103. Also get rid of the weird cache clear that nothing else uses and which we don't actually need.
Test Plan:
- Resolved timezone conflict by ignoring it.
- Resolved timezone conflict by picking a valid timezone.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16037
Summary: Fixes T8846. Ref T4103. I just took the shortest reasonable path here, this panel could use some attention on the next Conpherence iteration.
Test Plan: Turned on/off desktop notifications. Observed corresponding behavior in test notifications.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103, T8846
Differential Revision: https://secure.phabricator.com/D16036
Summary:
Ref T4103. Some settings (mostly nav collapsed/expanded states) use this endpoint to make adjustments when users press keys (like `\` to toggle the durable column).
All of these settings are now formal, so swap things over to transactions.
Test Plan: Collapsed/expanded various navs, reloaded pages, settings stuck.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16035
Summary: Ref T4103. Provide a CLI mechanism for purging the user cache.
Test Plan:
- Purged with `--purge-user` and `--purge-all`.
- Verified cache table got wiped.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16033
Summary: Ref T4103. Fully modernize the filetree show/hide, durable column show/hide, and profile menu collapse/wide settings.
Test Plan:
- Toggled filetree on/off, reloaded page, setting stuck.
- Same with conpherence column and profile menus.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16034
Summary: Ref T4103. This primarily makes sure the console gets turned on when you enable it so you aren't like "where's the console???"
Test Plan: Enabled console, saw console.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16030
Summary:
Ref T4103. These settings long-predate proper settings and are based on hard-coded user properties. Turn them into real settings.
(I didn't try to migrate the value since they're trivial to restore and only useful to developers.)
Test Plan:
- Toggled console on/off.
- Swapped tabs.
- Reloaded page, everything stayed sticky.
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16029
Summary:
Ref T4103. A few bits here:
- We have an ancient "tiles" preference which was just a fallback from 2-3 years ago. Throw that away.
- Modenize the other pinned stuff. We should likely revisit this after the next homepage update but I just left the actual defaults alone for now.
- Lightly prepare for global default editing.
- Add a "reset to defaults" option.
Test Plan:
- Pinned, unpinned, reordered and reset application homepage order.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16028
Summary:
Ref T4103. Convert this into a proper internal setting and use transactions to mutate it.
Also remove some no-longer-used old non-modular settings constants.
Test Plan:
- Used policy dropdown, saw recently-used projects.
- Selected some new projects, saw them appear.
- Grepped for all removed constants.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16027
Summary: Ref T4103. Modernize the blame/color toggles in Diffusion. These have no separate settings UI.
Test Plan: Toggled blame and colors, reloaded pages, settings stuck.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16026
Summary:
Ref T4103. Conpherence is doing some weird stuff and has its own redudnant settings object.
- Get rid of `ConpherenceSettings`.
- Use `getUserSetting()` instead of `loadPreferences()`.
- When applying transactions, add a new mechanism to efficiently prefill caches (this will still work anyway, but it's slower if we don't bulk-fetch).
Test Plan:
- Changed global Conpherence setting.
- Created a new Conpherence, saw setting set to global default.
- Changed local room setting.
- Submitted messages.
- Saw cache prefill for all particpiants in database.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16025
Summary: Ref T4103. This isn't necessary or particularly useful anymore since panels have been converted.
Test Plan: Visited URI, got a 404.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16024
Summary: Ref T4103. This converts other straightforward panels to modern stuff.
Test Plan:
- Edited various settings.
- Tried to set a bogus editor value.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16023
Summary: Ref T4103. Only trick here is hiding the panel if Conpherence is not installed.
Test Plan:
- Edited Conpherence preferences.
- Uninstalled Conpherence, saw panel vanish.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16022
Summary:
Ref T4103. Some settings (like the collapsed/expanded state of the diff filetree) are currently ad-hoc. They weren't being read correctly.
Also, simplify the caching code a little bit.
Test Plan: Toggled filetree, reloaded page, got sticky behavior.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16021
Summary:
Ref T4103. Settings panels are grouped into categories of similar panels (like "Email" or "Sessions and Logs").
Currently, this is done informally, by just grouping and ordering by strings. This won't work well with translations, since it means the ordering is entirely dependent on the language order, so the first settings panel you see might be something irrelvant or confusing. We'd also potentially break third-party stuff by changing strings, but do so in a silent hard-to-detect way.
Provide formal objects and modularize the panel groups completely.
Test Plan: Verified all panels still appear properly and in the same groups and order.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16020
Summary:
Ref T4103. We have a couple of settings like this where changing one setting changes another (e.g., enabling DarkConsole makes the console visible).
Provide a mechanism to let changing timezone really mean "change timezone, and also clear the timezone offset".
Test Plan: Swapped timezones, reconciled them by ignoring the offset, changed timezone again to another zone with the same offset, got asked to reconcile again.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16018
Summary:
Ref T4103. This pretty much replaces these panels in-place with similar looking ones that go through EditEngine.
This has a few rough edges but they're pretty minor and/or hard to hit (for example, when editing another user's settings, the crumbs have a redundant link in them).
Test Plan:
- Edited my own settings.
- Edited a bot user's settings.
- Tried to edit another user's settings (failed).
{F1674465}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16017
Summary:
Ref T4103. This is just incremental cleanup:
- Add "internal" settings, which aren't editable via the UI. They can still do validation and run through the normal pathway. Move a couple settings to use this.
- Remove `getPreference()` on `PhabricatorUser`, which was a sort of prototype version of `getUserSetting()`.
- Make `getUserSetting()` validate setting values before returning them, to improve robustness if we change allowable values later.
- Add a user setting cache, since reading user settings was getting fairly expensive on Calendar.
- Improve performance of setting validation for timezone setting (don't require building/computing all timezone offsets).
- Since we have the cache anyway, make the timezone override a little more general in its approach.
- Move editor stuff to use `getUserSetting()`.
Test Plan:
- Changed search scopes.
- Reconciled local and server timezone settings by ignoring and changing timezones.
- Changed date/time settings, browsed Calendar, queried date ranges.
- Verified editor links generate properly in Diffusion.
- Browsed around with time/date settings looking at timestamps.
- Grepped for `getPreference()`, nuked all the ones coming off `$user` or `$viewer` that I could find.
- Changed accessiblity to high-contrast colors.
- Ran all unit tests.
- Grepped for removed constants.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16015
Summary:
Ref T4103. This is a weird standalone setting that I didn't clean up earlier.
Also fix an issue with the PronounSetting and the Editor not interacting properly.
Test Plan: Edited using new EditEngine UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16014
Summary: Change metamta.differential.patch-format over to an enum option now that they're implemented.
Test Plan: Looked at settings page.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D16032
Summary:
Ref T11092. With Quicksand (or, possibly, some as-yet-unknown non-Quicksand workflow) the client can get stuck with an out-of-date revision PHID.
We then save comments with a `revisionPHID` from one revision and a `changesetID` from a different one.
Detect and prevent this. This stops the workflow immediately when the use first clicks, so it should allow us to detect this issue if it has some other non-Quicksand cause.
Test Plan:
- Opened revision `D123`.
- Pressed `\` to enable the sidebar and Quicksand.
- Clicked a link to revision `D124`.
- Added inlines.
Previously, these could ghost. The exact UI behavior is difficult to describe, but in the database they end up with a `changesetID` for `D124` but the original `revisionPHID` for `D123`, presumably because state is sticking around from the first page.
After this patch, an exception is thrown immediately. Additionally:
- Reloaded to clear quicksand state, added comments fine.
- Disabled sidebar/quicksand, added comments fine.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11092
Differential Revision: https://secure.phabricator.com/D16031
Summary:
Ref T11076. Ref T9897. Bad links on Phame blogs are currently made worse because we try to prompt you to login on a non-cookie domain.
Instead, just 404 in a vanilla way. Do so cleanly on external domains.
Test Plan: {F1672399}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9897, T11076
Differential Revision: https://secure.phabricator.com/D16010
Summary:
Fixes T11082. Currently, the `/123/` and `/CALLSIGN/` versions of the URI get the same score.
Also the scores are backwards.
Test Plan:
- Added `getPublicCloneURI()` output to repository listing.
- Before patch, saw a repository with a callsign list a less-preferred ID-based URI.
- After patch, saw the repository list the more-preferred callsign-based URI.
Reviewers: chad
Reviewed By: chad
Subscribers: nikolay.metchev
Maniphest Tasks: T11082
Differential Revision: https://secure.phabricator.com/D16008
Summary:
Ref T4103. These are currently stored on the user, for historic/performance reasons.
Since I want administrators to be able to set defaults for translations and timezones at a minimum and there's no longer a meaningful performance penalty for moving them off the user record, turn them into real preferences and then nuke the columns.
Test Plan:
- Set settings to unusual values.
- Ran migrations.
- Verified my unusual settings survived.
- Created a new user.
- Edited all settings with old and new UIs.
- Reconciled client/server timezone disagreement.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16005
Summary:
Ref T4103. This doesn't get everything, but takes care of most of the easy stuff.
The tricky-ish bit here is that I need to move timezones, pronouns and translations to proper settings. I expect to pursue that next.
Test Plan:
- Grepped for `loadPreferences` to identify callsites.
- Changed start-of-week setting, loaded Calendar, saw correct start.
- Visited welcome page, read "Adjust Settings" point.
- Loaded Conpherence -- I changed behavior here slightly (switching threads drops the title glyph) but it wasn't consistent to start with and this seems like a good thing to push to the next version of Conpherence.
- Enabled Filetree, toggled in Differential.
- Disabled Filetree, no longer visible in Differential.
- Changed "Unified Diffs" preference to "Small Screens" vs "Always".
- Toggled filetree in Diffusion.
- Edited a task, saw sensible projects in policy dropdown.
- Viewed user profile, uncollapsed/collapsed side nav, reloaded page, sticky'd.
- Toggled "monospaced textareas", used a comment box, got appropriate fonts.
- Toggled durable column.
- Disabled title glyphs.
- Changed monospaced font to 18px/36px impact.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16004
Summary:
Ref T4103. Currently, we issue a `SELECT * FROM user_preferences ... WHERE userPHID = ...` on every page to load the viewer's settings.
There are several other questionable data accesses on every page too, most of which could benefit from improved caching strategies (see T4103#178122).
This query will soon get more expensive, since it may need to load several objects (e.g., the user's settings and their "role profile" settings). Although we could put that data on the User and do both in one query, it's nicer to put it on the Preferences object ("This inherits from profile X") which means we need to do several queries.
Rather than paying a greater price, we can cheat this stuff into the existing query where we load the user's session by providing a user cache table and doing some JOIN magic. This lets us issue one query and try to get cache hits on a bunch of caches cheaply (well, we'll be in trouble at the MySQL JOIN limit of 61 tables, but have some headroom).
For now, just get it working:
- Add the table.
- Try to get user settings "for free" when we load the session.
- If we miss, fill user settings into the cache on-demand.
- We only use this in one place (DarkConsole) for now. I'll use it more widely in the next diff.
Test Plan:
- Loaded page as logged-in user.
- Loaded page as logged-out user.
- Examined session query to see cache joins.
- Changed settings, saw database cache fill.
- Toggled DarkConsole on and off.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16001
Summary:
Ref T4103. This tackles all the easy stuff. Not yet handled:
- Translation, pronoun, timezone: these are weird and stored on the User object instead of in settings.
- Conpherence default: actually just missed this one, it's normal.
- 1000 dropdowns for email notification preferences (messy, technically).
Test Plan:
wow look at all these settings
{F1670442}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D15999
Summary:
Ref T6299. This makes more of the links point to the right places.
Not covered yet:
- Projects and subscribers don't point to the right place (this is a little tricky to fix, I think).
- `[[ #anchor ]]`s won't do the right thing in, uh, email, I guess, since `uri.here` is not set. This is also a little tricky.
Possibly we should just remove subscribers (although also kind of tricky).
Test Plan: On a custom-domain blog, observed that fewer things were broken.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6299
Differential Revision: https://secure.phabricator.com/D16007
Summary: If you try to join or add members to a parent project, we currently return 404. This instead adds an informational dialog. Fixes T11055
Test Plan: Click on Join Project and Add Members while on a Parent Project or Milestone.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11055
Differential Revision: https://secure.phabricator.com/D16000
Summary: Ref T4103. Just porting these directly for now, no attempt to organize things yet.
Test Plan: {F1669263}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D15997
Test Plan: click new link, get to the right page
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15996
Summary: Ref T4103. This starts breaking out settings in a modern way to prepare for global defaults.
Test Plan:
- Edited diff settings.
- Saw them take effect in primary settings pane.
- Set stuff to new automatic defaults.
- Tried to edit another user's settings.
- Edited a bot's settings as an administrator.
{F1669077}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D15995
Summary:
Ref T4103. This give preferences a PHID, policy/transaction interfaces, a transaction table, and a Query class.
This doesn't actually change how they're edited, yet.
Test Plan:
- Ran migrations.
- Inspected database for date created, date modified, PHIDs.
- Changed some of my preferences.
- Deleted a user's preferences, verified they reset properly.
- Set some preferences as a new user, got a new row.
- Destroyed a user, verified their preferences were destroyed.
- Sent Conpherence messages.
- Send mail.
- Tried to edit another user's settings.
- Tried to edit a bot's settings as a non-admin.
- Edited a bot's settings as an admin (technically, none of the editable settings are actually stored in the settings table, currently).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D15991
Summary: Seen some complaints about usability here, adding role=dialog to improve when these trigger.
Test Plan: Turn on Voiceover, tab over to log out link, here proper dialog title and text before highlighted submit button.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15993
Summary:
Ref T10769. The user availability cache write shouldn't happen in read-only mode, nor should the Differential parse cache write.
(We might want to turn off the availbility feature completely since it's potentially expensive if we can't cache it, but I think we're OK for now.)
Test Plan:
In read-only mode:
- Browsed as a user with an out-of-date availability cache.
- Loaded an older revision without cached parse data.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10769
Differential Revision: https://secure.phabricator.com/D15988
Summary:
Ref T4292. For hosted, clustered repositories we have a good way to increment the internal version of the repository: every time a user pushes something, we increment the version by 1.
We don't have a great way to do this for observed/remote repositories because when we `git fetch` we might get nothing, or we might get some changes, and we can't easily tell //what// changes we got.
For example, if we see that another node is at "version 97", and we do a fetch and see some changes, we don't know if we're in sync with them (i.e., also at "version 97") or ahead of them (at "version 98").
This implements a simple way to version an observed repository:
- Take the head of every branch/tag.
- Look them up.
- Pick the biggest internal ID number.
This will work //except// when branches are deleted, which could cause the version to go backward if the "biggest commit" is the one that was deleted. This should be OK, since it's rare and the effects are minor and the repository will "self-heal" on the next actual push.
Test Plan:
- Created an observed repository.
- Ran `bin/repository update` and observed a sensible version number appear in the version table.
- Pushed to the remote, did another update, saw a sensible update.
- Did an update with no push, saw no effect on version number.
- Toggled repository to hosted, saw the version reset.
- Simulated read traffic to out-of-sync node, saw it do a remote fetch.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15986
Summary:
Ref T11051. This is still not as clear as it should be, but is at least working as intended now.
I believe this part of the code just never worked. The test plan on D10489 didn't specifically cover it.
Test Plan:
Did this sort of thing in a repository:
```
$ git checkout -b featurex
$ echo x >> y
$ git commit -am wip
$ arc diff
```
Then I simulated just pushing it (this flow is a little more involved than necessary):
```
$ arc land --hold
$ git commit --amend
$ # remove all metadata -- particularly, "Differential Revision"!
$ git push HEAD:master
```
I got a not-great but more-useful dialog:
{F1667318}
Prior to this change, the hash match was incorrectly not reported at all.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11051
Differential Revision: https://secure.phabricator.com/D15989
Summary:
Fixes T11042. Currently, all `bin/storage` workflows stop if `cluster.read-only` is set:
```
$ ./bin/storage adjust
Usage Exception: Phabricator is currently in read-only mode. Use --force to override this mode.
```
However, some of them (`status`, `dump`, `databases`, etc) are read-only anyway and safe to run. Don't prompt in these cases.
Test Plan:
- Set `cluster.read-only` to `true`.
- Ran `bin/storage dump`, `bin/storage status`, etc. No longer received messages.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11042
Differential Revision: https://secure.phabricator.com/D15987
Summary:
Ref T5267. Fixes T9643. Currently, we can not parse/extract a small fraction of strings:
- PHP files which contain obscure syntax that XHPAST can not parse.
- HEREDOCs do not have a useable `evalStatic()` behavior right now.
Emit these as warnings, but continue and generate all usable/extractable translations.
Test Plan:
```
epriestley@orbital ~/dev/phabricator $ ./bin/i18n extract . >/dev/null
Found 4,548 files...
Done.
WARNING: Failed to extract strings from file "/Users/epriestley/dev/core/lib/phabricator/externals/stripe-php/lib/Stripe/ApiRequestor.php": XHPAST Parse Error: syntax error, unexpected T_STRING on line 357
WARNING: Failed to evaluate pht() call on line 141 in "/Users/epriestley/dev/core/lib/phabricator/scripts/repository/commit_hook.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 24 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorClusterConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 23 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 49 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 83 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 91 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 97 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 103 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 113 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 119 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 128 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 137 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 149 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 159 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 166 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 179 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 192 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 24 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorNotificationConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 26 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/harbormaster/step/HarbormasterCircleCIBuildStepImplementation.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 154 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/maniphest/config/PhabricatorManiphestConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 282 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/maniphest/config/PhabricatorManiphestConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 84 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/maniphest/editor/ManiphestEditEngine.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 345 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/metamta/storage/PhabricatorMetaMTAReceivedMail.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 59 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/owners/editor/PhabricatorOwnersPackageEditEngine.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 26 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/project/config/PhabricatorProjectConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 53 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/project/config/PhabricatorProjectConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 98 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/search/engine/PhabricatorSearchEngineAPIMethod.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 165 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/search/engine/PhabricatorSearchEngineAPIMethod.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 252 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/search/engine/PhabricatorSearchEngineAPIMethod.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 299 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/search/engine/PhabricatorSearchEngineAPIMethod.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 360 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/search/engine/PhabricatorSearchEngineAPIMethod.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 439 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/search/engine/PhabricatorSearchEngineAPIMethod.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 529 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/search/engine/PhabricatorSearchEngineAPIMethod.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 54 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/transactions/controller/PhabricatorEditEngineConfigurationLockController.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 56 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/transactions/view/PhabricatorApplicationEditHTTPParameterHelpView.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 126 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/transactions/view/PhabricatorApplicationEditHTTPParameterHelpView.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 185 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/transactions/view/PhabricatorApplicationEditHTTPParameterHelpView.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 238 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/transactions/view/PhabricatorApplicationEditHTTPParameterHelpView.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 288 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/transactions/view/PhabricatorApplicationEditHTTPParameterHelpView.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 17 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/uiexample/examples/PhabricatorRemarkupUIExample.php": Unexpected node during static evaluation, of type: n_HEREDOC
epriestley@orbital ~/dev/phabricator $
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5267, T9643
Differential Revision: https://secure.phabricator.com/D15983
Summary:
Fixes T11043. This page was still reading the old information directly instead of going through the cluster-aware stuff.
Have it ask the cluster-aware stuff for information instead.
Test Plan:
- Nuked MySQL on localhost.
- Configured cluster hosts.
- Loaded "Database Status" page -- worked after patch.
- Grepped for any remaining `mysql.configuration-provider` stragglers, came up empty.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11043
Differential Revision: https://secure.phabricator.com/D15982
Summary:
Fixes T8510. Results are internally ordered by "name", which is the full list of strings a user can type to match a result. On the balance, it is probably good/correct to order by this (particularly, it allows `function(x)` to sort near `x`).
However, the way projects were built put the tags first, so a project like "Discovery" could end up last if it had originally been created with a different name like "Search Team", so that its first slug is "search-team".
Instead, put the display name first in the ordering.
Test Plan:
{F1661775}
To reproduce in particular:
- Create a project named "Zebra".
- Create a lot of projects named "Armadillo-blahblahblah".
- Rename "Zebra" to "Armadillo".
Before the patch, the new "Armadillo" project would still sort as though it were named "Zebra". After the patch, it sorts as expected normally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8510
Differential Revision: https://secure.phabricator.com/D15981
Summary: Ref T5267. Put "Deutsch" in the list instead of "German", so you can find your language without knowing the English word for it.
Test Plan: {F1661598}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5267
Differential Revision: https://secure.phabricator.com/D15980
Summary:
Ref T5267. Ref T4103. Currently, adding new locale support to the upstream fills this menu with confusing options which don't do anything. Separate it into four groups:
- Translations: these have a "reasonable number" of strings and you'll probably see some obvious effect if you switch to the translation.
- Limited Translations: these have very few or no strings, and include locales which we've added but don't ship translations for.
- Silly Translations: Pirate english, etc.
- Test Translations: ALLCAPS, raw strings, etc.
Czech is currently in "test" instead of "limited" for historical reasons; I'll remedy this in the next change.
Test Plan: {F1661523}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103, T5267
Differential Revision: https://secure.phabricator.com/D15978
Summary:
Ref T4103. This removes these options:
{F1660585}
The jump nav option came from T916, when we had a separate jump nav on the home page. Essentially no one has ever been confused by the behavior of search or disabled this feature. Here are the stats for this install:
| Total Users | 36656 |
| Have Set Any Preference | 3084 |
| Have Disabled Jump | 6
| Are Not "Security Researchers" | 2
| Any Account Activity | 0
The "/" option came in the same change, but the preference came from T989. This keystroke conflicts with a default Firefox keystroke. Almost no one cares about this either, but I count 6 real users who have disabled the behavior. I suspect the number of real users who //use// it may be smaller.
In Safari and Firefox, the "tab" key does the same thing.
In Chrome, the "tab" key does the same thing if {nav Preferences > Web Content > "Pressing Tab highlights..."} is disabled.
Upshot: jump nav is great, bulk of the change in T989 was clearly great, specific preferences that came out of it seem not-so-great and now is a good time to kill them as we head into T4103.
Test Plan:
- Grepped for removed constants.
- Pressed "/".
- Searched for `T123`.
- Viewed settings.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D15976
Summary:
Fixes T11030. Fixes T11032.
- Allow HTTP access to "Public" repositories even if `diffusion.allow-http-auth` is disabled.
- If you run Phabricator on an unusual port (???) use that port as the default when generating HTTP URIs.
Test Plan:
- Faked `phabricator.base-uri` to an unusual port, saw repository HTTP URI generate with an unusual port.
- Disabled `diffusion.allow-http-auth`, confirmed that toggling view policy between "public" and "users" activated or deactivated HTTP clone URI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11030, T11032
Differential Revision: https://secure.phabricator.com/D15973
Summary:
Ref T11016. I think I inverted the meaning of this function by accident in D14893.
The intent is to return a list of users: direct users, and all members of all projects.
Prior to this patch actually returns direct users, and all projects they are members of.
Test Plan:
- Created "Project with Dog".
- Added user "dog" to project.
- Created package "X", owning file "/x", with audit enabled.
- Made "X" owned by "Project with Dog".
- Modified "/x" and had user "dog" accept it.
- Landed change.
- Prior to change: package "X" incorrectly added as auditor.
- After change: package "X" correctly omitted as auditor, because a member reviewed the change.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11016
Differential Revision: https://secure.phabricator.com/D15971
Summary:
Fixes T11017. We add packages as "uninteresting" auditors so that we can query commits by package later.
Until recently, this didn't matter because we didn't send mail to packages. But now we do, so stop mailing them when they don't actually need to do anything.
Test Plan:
- Made a commit to a file which was part of a package but which I owned (so it does not trigger auditing).
- `var_dump()`'d mail "To:" PHIDs.
- Before patch: included package.
- After patch: no package.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11017
Differential Revision: https://secure.phabricator.com/D15970
Summary:
Fixes T11020. I think this resolves things -- `$new_version` (set above) should be used, not `$new_log` directly.
Specifically, we would get into trouble if the initial push failed for some reason (working copy not initialized yet, commit hook rejected, etc).
Test Plan: Made a bad push to a new repository. Saw it freeze before the patch and succeed afterwards.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11020
Differential Revision: https://secure.phabricator.com/D15969
Summary: Fixes T11010. This also needs to be inflated until we fix the whole client/server responsibility issue here.
Test Plan:
- Created a revision while observing error log, no error.
- Disabled "allow self accept", tried to make myself a reviewer, got rejected with an error message.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11010
Differential Revision: https://secure.phabricator.com/D15966
Summary: Ref T9606, Clicking on the calendar preview header in user's profile page should link to user's full month calendar
Test Plan: Open user profile, scroll to calendar preview, click on Calendar box header. This should open the month calendar for the user (not viewer)
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T9606
Differential Revision: https://secure.phabricator.com/D15967
Summary: Hover hint on calendar list items should be to the right in day view, left in profile view, on top in month view
Test Plan: Open profile view, calendar items should have a left hover. Open day view, calendar items should have a right hover. Open month view, calendar items should have top hover.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T9606
Differential Revision: https://secure.phabricator.com/D15964
Summary: Ref T9606
Test Plan: Open people profile for a user with events today/tomorrow, see a panel under badges panel with event list
Reviewers: chad, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T9606
Differential Revision: https://secure.phabricator.com/D15851
Summary:
Ref T3025.
- Show current zone to make the current vs new more clear.
- Tweak some text.
Test Plan: {F1656534}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T3025
Differential Revision: https://secure.phabricator.com/D15965
Summary:
Fixes T10381. When we converted to `PHUIRemarkupView`, some instructional text got linebreaks added when it shouldn't have them (the source is written in PHP and wrapped at 80 characters, but the output should flow naturally).
Fix this so we don't preserve linebreaks.
This also makes `PHUIRemarkupView` a little more powerful and inches us toward fixing Phame/CORGI remarkup issues, getting rid of `PhabricatorMarkupInterface` / `PhabricatorMarkupOneOff`, and dropping all the application hard-coding in `PhabricatorMarkupEngine`.
Test Plan:
- Grepped for all callsites, looking for callsites which accept remarkup written in `<<<HEREDOC` format.
- Viewed form instructions, Conduit API methods, HTTP parameter edit instructions.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10381
Differential Revision: https://secure.phabricator.com/D15963
Summary:
Ref T3025. Chrome gives us an easily-accessible, much better guess at which timezone the user is in.
Firefox also exposes "Intl" but this doesn't seem to be a reliable method to read the timezone.
Test Plan:
In Chrome, swapped my system date/time between zones, clicked the "reconcile" popup, got the dropdown prefilled accurately.
In Safari (no `Intl` API) got the normal flow with no default selected.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T3025
Differential Revision: https://secure.phabricator.com/D15962
Summary: Ref T10512. This is fairly bare-bones but appears to work.
Test Plan: Queried all users, queried some stuff by constraints.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10512
Differential Revision: https://secure.phabricator.com/D15959
Summary: Ref T3025. This adds a check for different client/server timezone offsets and gives users an option to fix them or ignore them.
Test Plan:
- Fiddled with timezone in Settings and System Preferences.
- Got appropriate prompts and behavior after simulating various trips to and from exotic locales.
In particular, this slightly tricky case seems to work correctly:
- Travel to NY.
- Ignore discrepancy (you're only there for a couple hours for an important meeting, and returning to SF on a later flight).
- Return to SF for a few days.
- Travel back to NY.
- You should be prompted again, since you left the timezone after you ignored the discrepancy.
{F1654528}
{F1654529}
{F1654530}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T3025
Differential Revision: https://secure.phabricator.com/D15961
Summary:
Ref T5187. This definitely feels a bit flimsy and I'm going to hold it until I cut the release since it changes a couple of things about Workflow in general, but it seems to work OK and most of it is fine.
The intent is described in T5187#176236.
In practice, most of that works like I describe, then the `phui-file-upload` behavior gets some weird glue to figure out if the input is part of the form. Not the most elegant system, but I think it'll hold until we come up with many reasons to write a lot more Javascript.
Test Plan:
Used both drag-and-drop and the upload dialog to upload files in Safari, Firefox and Chrome.
{F1653716}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5187
Differential Revision: https://secure.phabricator.com/D15953
Summary: Makes the background transparent for uploaded thumbs. This page in general needs lots of work, but here's the minimum. Fixes T10986
Test Plan: Edit a Mock with a transparent jeff.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10986
Differential Revision: https://secure.phabricator.com/D15957
Summary: Couple of edge cases here I never cleaned up. This inlines points and projects better, with spacing and use of grey to better differentate from project tag colors.
Test Plan:
Review edge cases on workboard with multiple short and long project names.
{F1653998}
{F1653999}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15956
Summary: Converts to table so text wraps on long strings well, button always stays top right, better spacing underneath.
Test Plan: Mail, Gmail, mobile
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15955
Summary:
Ref T10939. This makes the `viewer()` function work again. It retains its own meaning (viewer, plus all their projects and packages).
There's no `exact-viewer()` function; we could conceivably add one eventually if we need it.
Test Plan:
- Queried for `viewer()`, got the same results as querying by my own username.
- Browsed function in token browser.
- Reviewed autogenerated documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15951
Summary:
Ref T10939. If you haven't installed a dashboard, we show an "Active Revisions" panel on the homepage by default. I waited a bit to update this, but the new buckets don't seem to have caused any major problems so far.
Update this to use the new logic. I'm just showing "must review" + "should review", which is similar to the old beahvior.
Also replace the notification count with this same number. This is a little different from the old behavior, but simpler, and I think we should probably move toward getting rid of these counts completely.
Test Plan:
- Viewed homepage as logged-in user, saw my revisions (including revisions I have authority over only because of project membership).
- Saw consistent notification count.
- Grepped for removed method.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15950
Summary: Ref T10917. This is getting added as a link right now, which causes it to get `<a href>`'d in HTML mail. Add it as text instead.
Test Plan: Edited a key, examined HTML mail body carefully.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10917
Differential Revision: https://secure.phabricator.com/D15952
Summary:
Ref T10917. This cheats fairly heavily to generate SSH key mail:
- Generate normal transaction mail.
- Force it to go to the user.
- Use `setForceDelivery()` to force it to actually be delivered.
- Add some warning language to the mail body.
This doesn't move us much closer to Glorious Infrastructure for this whole class of events, but should do what it needs to for now and doesn't really require anything sketchy.
Test Plan: Created and edited SSH keys, got security notice mail.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10917
Differential Revision: https://secure.phabricator.com/D15948
Summary:
Ref T10917. Converts web UI edits to transactions.
This is about 95% "the right way", and then I cheated on the last 5% instead of building a real EditEngine. We don't need it for anything else right now and some of the dialog workflows here are a little weird so I'm just planning to skip it for the moment unless it ends up being easier to do after the next phase (mail notifications) or something like that.
Test Plan: {F1652160}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10917
Differential Revision: https://secure.phabricator.com/D15947
Summary:
Ref T10917. This primarily prepares these for transactions by giving us a place to:
- review old deactivated keys; and
- review changes to keys.
Future changes will add transactions and a timeline so key changes are recorded exhaustively and can be more easily audited.
Test Plan:
{F1652089}
{F1652090}
{F1652091}
{F1652092}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10917
Differential Revision: https://secure.phabricator.com/D15946
Summary:
Via HackerOne. Currently, you can use "Lock Permanently" to lock a credential permanently, but you can still enable Conduit API access to it. This directly contradicts both intent of the setting and its description as presented to the user.
Instead:
- When a credential is locked, revoke Conduit API access.
- Prevent API access from being enabled for locked credentials.
- Prevent API access to locked credentials, period.
Test Plan:
- Created a credential.
- Enabled API access.
- Locked credential.
- Saw API access become disabled.
- Tried to enable API access; was rebuffed.
- Queried credential via API, wasn't granted access.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15944
Summary:
Ref T10917. Currently, when you delete an SSH key, we really truly delete it forever.
This isn't very consistent with other applications, but we built this stuff a long time ago before we were as rigorous about retaining data and making it auditable.
In partiular, destroying data isn't good for auditing after security issues, since it means we can't show you logs of any changes an attacker might have made to your keys.
To prepare to improve this, stop destoying data. This will allow later changes to become transaction-oriented and show normal transaction logs.
The tricky part here is that we have a `UNIQUE KEY` on the public key part of the key.
Instead, I changed this to `UNIQUE (key, isActive)`, where `isActive` is a nullable boolean column. This works because MySQL does not enforce "unique" if part of the key is `NULL`.
So you can't have two rows with `("A", 1)`, but you can have as many rows as you want with `("A", null)`. This lets us keep the "each key may only be active for one user/object" rule without requiring us to delete any data.
Test Plan:
- Ran schema changes.
- Viewed public keys.
- Tried to add a duplicate key, got rejected (already associated with another object).
- Deleted SSH key.
- Verified that the key was no longer actually deleted from the database, just marked inactive (in future changes, I'll update the UI to be more clear about this).
- Uploaded a new copy of the same public key, worked fine (no duplicate key rejection).
- Tried to upload yet another copy, got rejected.
- Generated a new keypair.
- Tried to upload a duplicate to an Almanac device, got rejected.
- Generated a new pair for a device.
- Trusted a device key.
- Untrusted a device key.
- "Deleted" a device key.
- Tried to trust a deleted device key, got "inactive" message.
- Ran `bin/ssh-auth`, got good output with unique keys.
- Ran `cat ~/.ssh/id_rsa.pub | ./bin/ssh-auth-key`, got good output with one key.
- Used `auth.querypublickeys` Conduit method to query keys, got good active keys.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10917
Differential Revision: https://secure.phabricator.com/D15943
Summary: Ref T10694. Switch default mode to HTML since it has a number of significant advantages and we haven't seen reports of significant problems.
Test Plan:
- Switched preference to default (saw "HTML" in UI).
- Sent myself some mail.
- Got HTML mail.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10694
Differential Revision: https://secure.phabricator.com/D15885
Summary:
Ref T10694. If this feels good, I'd plan to eventually add something similar to other applications ("View Task", etc).
Not sure if we should keep the object link later in the mail body or not. I left it for now.
Test Plan: {F1307256, size=full}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10694
Differential Revision: https://secure.phabricator.com/D15884
Summary: Wow! Real value here.
Test Plan: No more red underlines.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15941
Summary: Fixes T10493. See that task and inline comments for discussion.
Test Plan:
Created an object with some projects, saw the transaction in resulting mail:
{F1600496}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10493
Differential Revision: https://secure.phabricator.com/D15942
Fixes T10981. Ref T10939. `arc` currently has some odd, hard-coded checks
(missing reviewers, all reviewers away) that depend on the field value being
in a certain format.
The recent changes swapped the field value from scalars (PHIDs) to
dictionaries and broke this workflow. It worked fine in testing because we
apply these checks very inconsistently (not on update or `--edit`).
To get around this for now, serialize into "PHID!" and then unserialize on
the other side. This is icky but keeps us from needing to require an `arc`
upgrade.
These checks are generally bad news and should move to the server side in the
long run (T4631).
(This probably prevents clean `arc diff`, so I'm just cowboy committing it.)
Auditors: chad
Summary:
Ref T10939. Fixes T10174. We can currently trigger "uninteresting" auditors in two ways:
- Packages with auditing disabled ("NONE" audits).
- Packages with auditing enabled, but they don't need an audit (e.g., author is a pacakge owner; "NOT REQUIRED" audits).
These audits aren't interesting (we only write them so we can list "commits in this package" from other UIs) but right now they take up the audit slot. In particular:
- They show in the UI, but are generally useless/confusing nowadays. The actual table of contents does a better job of just showing "which packages do these paths belong to" now, and shows all packages for each path.
- They block Herald from adding real auditors.
Change this:
- Don't show uninteresting auditors.
- Let Herald upgrade uninteresting auditors into real auditors.
Test Plan:
- Ran `bin/repository reparse --owners <commit> --force`, and `--herald` to trigger Owners and Herald rules.
- With a package with auditing disabled, triggered a "None" audit and saw it no longer appear in the UI with the patch applied.
- With a package with auditing disabled, added a Herald rule to trigger an audit. With the patch, saw it go through and upgrade the audit to "Audit Required".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10174, T10939
Differential Revision: https://secure.phabricator.com/D15940
Summary:
Ref T10939. Fixes T10181. This slightly simplifies, then documents the auditing rules, which haven't been updated for a while. In particular:
- If an owner authored the change, never audit.
- Examine all reviewers to determine reviewer audit status, not just the first reviewer.
- Simplify some of the loading code a bit.
Test Plan:
- Ran `bin/repository reparse --owners <commit> --force` to trigger this stuff.
- Verified that the web UI did reasonable things with resulting audits.
- Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10181, T10939
Differential Revision: https://secure.phabricator.com/D15939
Summary: Ref T10939. This adds UI, transactions, etc, to adjust dominion rules.
Test Plan:
- Read documentation.
- Changed dominion rules.
- Created packages on `/` ("A") and `/x` ("B") with "Auto Review: Review".
- Touched `/x`.
- Verified that A and B were added with strong dominion.
- Verified that only B was added when A was set to weak dominion.
- Viewed file in Diffusion, saw correct ownership with strong/weak dominion rules.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15936
Summary:
Ref T10939. This supports two settings for packages (although they can't be configured yet):
- **Strong Dominion**: If the package owns `a/`, it always owns every subpath, even if another package also owns the subpath. For example, if I own `src/differential/`, I always own it even if someone else claims `src/differential/js/` as part of the "Javascript" package. This is the current behavior, and the default.
- **Weak Dominion**: If the package owns `a/`, but another package owns `a/b/`, the package gives up control of those paths and no longer owns paths in `a/b/`. This is a new behavior which can make defining some types of packages easier.
In the next change, I'll allow users to switch these modes and document what they mean.
Test Plan:
- Ran existing unit tests.
- Added new unit tests.
Reviewers: chad
Reviewed By: chad
Subscribers: joel
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15935
Summary: Ref T10939. Fixes T4887. Supports "username!" to add a reviewer as blocking.
Test Plan: Added and removed blocking and non-blocking reviewers via CLI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4887, T10939
Differential Revision: https://secure.phabricator.com/D15934
Summary:
Ref T10939. Adds a `blocking(...)` token.
This code is pretty iffy and going to get worse before it gets better, but the fix (T10967 + EditEngine) is going to be a fair chunk of work down the road.
Test Plan: {F1426966}
Reviewers: chad
Reviewed By: chad
Subscribers: scode
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15933
Summary: Fixes T10975. The "scramble attached file permissions when an object is saved" code is misfiring here too. See T10778 + D15803 for prior work.
Test Plan:
- Ran `bin/storage upgrade -f`.
- Edited the view policy of an OAuth server (prepatch: fatal; postpatch: worked great).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10975
Differential Revision: https://secure.phabricator.com/D15938
Summary: Fixes T10972. Nothing actually updates this anymore, and only repositories ever did (e.g., Harbormaster and Drydock have never tracked it). Keeping track of this is more trouble than it's worth.
Test Plan: Grepped for constants, viewed a passphrase credential.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10972
Differential Revision: https://secure.phabricator.com/D15932
Summary: The S3 fields are mandatory and if you only enter the ones in the docs you will immediately encounter a "Amazon S3 is Only Partially Configured" error. For Mailgun the error is more difficult to figure out - emails get stuck on Mailgun's side but the error is illegible. On Phabricator's side you have to go trawling through nginx logs to find "Mail signature is not valid. Check your Mailgun API key."
Test Plan: Deploy a new standalone instance, follow old instructions, fail. Deploy another one, follow updated instructions, win.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15931
Summary:
Ref T10939. I don't think this is hugely important, but it doesn't clutter things up much and it's nice as a hint.
T4055 was the original request specifically asking for this. It wanted a separate bucket, but I think this use case isn't common/strong enough to justify that.
I would like to improve Differential's "X depends on Y" feature in the long term. We don't tend to use/need it much, but it could easily do a better and more automatic job of supporting review of a group of revisions.
Test Plan: {F1426636}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15930
Summary: Ref T10939. These poor stragglers got left out in the rain. Didn't catch any issues otherwise.
Test Plan: {F1426604}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15929
Summary: Ref T10939. For various historical reasons, revision status is a numeric string. This comparison fails because it's `(string) !== (int)`. Just use `!=` so this will still work if we turn it into a real string in the future.
Test Plan: Tried a more specific test case locally, got better looking results in "Must Review" and "Should Review".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15928
Summary:
Ref T10939. I'm not //totally// opposed to the existence of this element, but I think it's the kind of thing that would never make it upstream today. I think this should just be a T418 custom sort of thing in the long run, not a mainline upstream feature.
Overall, I think this thing is nearly useless and just adds visual clutter. My dashboard is about 100% red. This also sort of teaches users that it's fine to let revisions sit for a couple of days, which isn't what I'd like the UI to teach. Finally, removing it helps the UI feel a little less cluttered after the visually busy changes in D15926.
Test Plan: Grepped for removed config. Viewed revision list.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15927
Summary:
Ref T10939. Fixes T9263. Ref T4144.
First, this resolves users (converting users into all packages and projects they are responsible for) earlier, so bucketing can act on that data correctly. Previously, your own blocking reviews would appear in "Must Review" but your packages/projects' would not. Now, all of them will.
Second, this adds `exact(username)` to mean "just me, not my packages/projects". You can use this along with "Bucket: By Required Action" to create a personal view of "Active Revisions" if you'd like, and ignore all your project/package reviews.
Test Plan: Queried by "me" and "exact(me)", got reasonable looking results.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4144, T9263, T10939
Differential Revision: https://secure.phabricator.com/D15925
Summary:
Ref T10939. Ref T4144. This splits the existing buckets ("Blocking Others", "Action Required", "Waiting on Others") into 6-7 buckets with a stronger focus on what the next action you need to take is.
See T10939#175423 for some discussion.
Overall, I think some of the root problems here are caused by reviewer laziness and shotgun review workflows (where a ton of people get automatically added to everything, probably unnecessarily), but these buckets haven't been updated since the introduction of blocking reviewers or project/package reviewers and I think splitting the 3 buckets into 6 buckets isn't unreasonable, even though it's kind of a lot of buckets and the root problem here is approximately "I want to ignore a bunch of stuff on my dashboard".
I didn't remove the old bucketing code yet since it's still in use on the default homepage.
This also isn't quite right until I fix the tokenizer to work properly, since it won't bucket project/package reviewers accurately.
Test Plan: {F1395972}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4144, T10939
Differential Revision: https://secure.phabricator.com/D15924
Summary:
Ref T10939. Currently, Differential hard-codes some behaviors for the "active" filter. This introduces "buckets" to make this grouping behavior more general/flexible.
The buckets don't actually do any grouping yet, this just gets rid of the `$query === 'active'` stuff so far.
These buckets change the page size to a large value, becuase pagination won't currently work with bucketing.
The problem is that we normally paginate by selecting one more result than we need: so if we're building a page of size 10, we'll select 11 results. This is fast, and if we get 11 back, we know there's a next page with at least one result on it.
With buckets, we can't do this, since our 11 results might come back in these buckets:
- A, B, C, A, C, C, A, A, B, B, (B)
So we know there are more results, and we know that bucket B has more results, but we have no clue if bucket A and bucket C have more results or not (or if there's anything in bucket D, etc).
We might need to select a thousand more results to get the first (D) or the next (A).
So we could render something like "Some buckets have more results, click here to go to the next page", but users would normally expect to be able to see "This specific bucket, A, has more results.", and we can't do that without a lot more work.
It doesn't really matter for revisions, because almost no one has 1K of them, but this may need to be resolved eventually.
(I have some OK-ish ideas for resolving it but nothing I'm particularly happy with.)
Test Plan: {F1376542}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15923
Summary:
Ref T10939. Ref T4144. This moves the revision SearchEngine to modern code so I can add some kind of bucketing layer on top of it.
This seems to have worked pretty cleanly. One thing is that I removed the ability to search for "pending drafts":
- This was added in D1927 from a bootcamp task, was an indirect solution to a questionable problem, and almost certainly would not meet the bar today.
- Later, in D3324, we added the icons to the list. I think this is a better solution in general. In particular, it specifically addressed the query being kind of junky.
- At the time, Differential had a prebuilt "Drafts" filter. This was removed in D6347 with the move to ApplicationSearch, which simplified the large number of prebuilt filters. Although we got a lot of feedback about that, none requested that the drafts filter be restored.
Test Plan: Searched for responsible users, subscribers, orders, projects, repositories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4144, T10939
Differential Revision: https://secure.phabricator.com/D15921
Summary:
Looks like some copy pasta snuck in. Also fixes a missed
parenthesis.
Test Plan: Eyeball it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15920
Summary:
Ref T10939. If you already own a package, don't trigger the subscribe/review rules.
Document how these rules work.
Test Plan:
- Read documentation.
- Removed reviewers, updated a revision, got autoreviewed.
- Joined package.
- Removed reveiwers, updated a revision, no more autoreview.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15918
Summary: Ref T10939. Packages are valid reviewers, so let Herald "Add Reviewers" and "Add Blocking Reviewers" actions add them.
Test Plan:
- Wrote a rule to add package reviewers.
- Hit the rule, saw a package reviewer added, viewed transcript.
{F1311731}
{F1311732}
{F1311733}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15917
Summary:
Ref T10939. Fixes T8887. This enables and implements the "review" and "blocking review" options for packages.
This is a bit copy-pastey from `DifferentialReviewersHeraldAction`, which doesn't feel awesome. I think the right fix is Glorious Infrasturcture, though -- I filed T10967 to track that.
Test Plan:
- Set package autoreveiw to "Review".
- Updated, got a reveiwer.
- Set autoreview to "blocking".
- Updated, got a blocking reviewer.
{F1311720}
{F1311721}
{F1311722}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8887, T10939
Differential Revision: https://secure.phabricator.com/D15916
Summary:
Ref T10939. Ref T8887. This moves toward letting packages automatically become reviewers or blocking reviewers of owned code.
This change adds an "Auto Review" option to packages. Because adding reviewers/blocking reviewers is a little tricky, it doesn't actually have these options yet -- just a "subscribe" option. I'll do the reviewer work in the next update.
Test Plan:
Created a revision in a package with "Auto Review: Subscribe to Changes". The package got subscribed.
{F1311677}
{F1311678}
{F1311679}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8887, T10939
Differential Revision: https://secure.phabricator.com/D15915
Summary:
Ref T10939. This lets you add packages as reviewers manually.
"Project Reviewers" now lists both projects and packages. I have renamed this to "Coalition Reviewers" but that's probably horrible and confusing. I'm not sure "Group Reviewers" is much better.
Test Plan:
- Added a package as a reviewer manually.
- Joined it, got authority over it.
- Saw the review on my dashboard.
- Accepted the revision, got authority extended to the package review.
{F1311652}
{F1311653}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15914
Summary:
Ref T10939. These appear in "Subscribers" tokenizers now and we got a maybe slightly better icon in the last FA update: {icon shopping-bag} instead of {icon list-alt}.
(I don't feel strongly about this, the old icon just doesn't seem very evocative.)
Test Plan:
o.( O___O ).o
{F1311641}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15913
Summary:
Ref T10939. Fixes T7834.
- Make packages into mailable objects, like projects and users.
- Packages resolve recipients by resolving project and user owners into recipients.
Test Plan:
- Added a comment to a revision with a package subscriber.
- Used `bin/mail show-outbound` to see that owners got mail.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7834, T10939
Differential Revision: https://secure.phabricator.com/D15912
Summary:
Ref T10939. This allows the CLI to parse reviewers and subscribers like this:
```Reviewers: epriestley, O123 Some Package Name```
The rule goes:
- If a reviewer or subscriber starts with a monogram (like `X111`), just look that up and ignore everything until the next comma.
- Otherwise, split it on spaces and look up each part.
This means that these are valid:
```
alincoln htaft
alincoln, htaft
#a #b epriestley
O123 Some Package, epriestley, #b
```
I think the only real downside is that this:
```
O123 Some Package epriestley
```
...ignores the "epriestley" part. However, I don't expect users to be typing package monograms manually -- they just need to be representable by `arc land` and `arc diff --edit` and such. Those flows will always add commas and make the parse unambiguous.
Test Plan:
- Added test coverage.
- `amend --show`'d a revision with a package subscriber (this isn't currently possible to produce using the web UI, it came from a future change) and saw `Subscribers: O123 package name, usera, userb`.
- Updated a revision with a package subscriber.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15911
Summary:
Ref T10939. This isn't ideal because it's easy to confuse with zero ("O" vs "0") but I think this will mostly be read-only so it's probably one of the least-bad uses we could make of "O". We haven't really gotten into trouble with "I" (vs "1") for initiatives. Still, open to better ideas.
The goal here is to allow commit messages to include packages in some reasonable way, like `Reviewers: O123 Package Name, epriestley, alincoln`. The parser will ignore the "Package Name" part, that's just for humans. And I don't expect humans to type this, but when the use `arc diff --edit` or similar to update an //existing// revision, the reviewer needs to be represented somehow. It also needs to appear in the commit messages that `arc land` finalizes somehow.
I didn't hook up `/O123` as a URI, but this should do everything else I think.
Test Plan:
- Viewed package list.
- Viewed package detail.
- Did global search for `O12`.
- Used `O12` and `{O12}` remarkup rules.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15910
Summary:
Ref T10939. This has no effect yet since packages can not actually become reviewers, I'm just inching toward support.
- When searching for "responsible users", include revisions that need review by packages you have authority over.
- When calculating review authority, include authority over packages you are a member of (these currently never exist).
Test Plan:
This isn't reachable so I just `var_dump()`'d stuff and looked at the generated queries, which appeared correct/reasonable.
I'll vet this more thoroughly once packages can actually become reviewers.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15909
Summary: Ah, a fine thing it be.
Test Plan: Pip pip cheerio.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15919
Summary:
Ref T10923. This extension needs to load a little more data (with `needURIs`) to function correctly now.
(There's a recent migration does this, so indexes got updated correctly when it ran, so it hasn't been obvious that they weren't getting updated properly after that.)
Test Plan: Made an arbitrary edit to a repository, observed no more error in daemon logs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15908
Summary:
Ref T10939. This is just a bug. I thought this was what was described in T10174 but that's actually talking about something completely different.
Also make a `<select />` slightly easier to use.
Test Plan:
- Created a package with auditing enabled.
- Pushed a change.
- Saw audit trigger.
- Disabled the package, pushed a change.
- Before patch: saw audit trigger improperly.
- After patch: restarted daemons, then saw audit correctly not trigger.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15907
Summary:
Ref T4292. Currently, we hold one big lock around the whole `bin/repository update` workflow.
When running multiple daemons on different hosts, this lock can end up being contentious. In particular, we'll hold it during `git fetch` on every host globally, even though it's only useful to hold it locally per-device (that is, it's fine/good/expected if `repo001` and `repo002` happen to be fetching from a repository they are observing at the same time).
Instead, split it into two locks:
- One lock is scoped to the current device, and held during pull (usually `git fetch`). This just keeps multiple daemons accidentally running on the same host from making a mess when trying to initialize or update a working copy.
- One lock is scoped globally, and held during discovery. This makes sure daemons on different hosts don't step on each other when updating the database.
If we fail to acquire either lock, assume some other process is legitimately doing the work and bail more quietly instead of fataling. In approximately 100% of cases where users have hit this lock contention, that was the case: some other daemon was running somewhere doing the work and the error didn't actually represent an issue.
If there's an actual problem, we still raise a diagnostically useful message if you run `bin/repository update` manually, so there are still tools to figure out that something is hung or whatever.
Test Plan:
- Ran `bin/repository update`, `pull`, `discover`.
- Added `sleep(5)`, forced processes to contend, got lock exceptions and graceful exit with diagnostic message.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15903
Summary: Ref T10959. This does not fix the problem because the `.differential-diff td` rule is still stronger, but it does let you choose a more compact or breezy style for remarkup blocks and pastes.
Test Plan:
- Set font to `24px / 48px impact`.
- Viewed a paste, saw lovely readable text.
- Viewed an inline code block which was very easy on the eyes.
{F1310420}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10959
Differential Revision: https://secure.phabricator.com/D15904
Summary:
Fixes T10940. Two issues currently:
First, `PullLocal` deamon refuses to update non-cluster repositories on cluster devices. However, this is surprising/confusing/bad because as soon as you enroll a repository host in the cluster, most of the repositories on it stop working until you `clusterize` them. This is especially confusing because the documentation gives you a very nice, gradual walkthrough about going through things slowly and being able to check your work at every step, but we really drop you off a bit of a cliff here. The workflow implied by the documentation is a desirable one.
This operation is generally only unsafe/problematic if the daemon would be creating a //new// working copy. If a working copy already exists, we can reasonably guess that it's almost certainly because you've enrolled a previously un-clustered host into a new cluster. This allows the nice, gradual workflow the documentation describes to proceed as expected, without any weird surprises.
Instead of refusing to update these repositories, only refuse to update them if updating would create a new working copy. This should make transitioning much smoother without any meaningful reduction in safety.
Second, the lower-level `bin/repository update`, `refs`, `mirror`, etc., commands don't apply this same check. However, these commands are potentially just as dangerous. Use the same code to do a similar check there, making sure we only operate on repositories that are either expected to be on the current device, or which already exist here.
Test Plan:
- Ran `bin/phd debug pull`, saw diagnostic information choose to update most repositories (including some non-cluster repositories) but properly skip non-cluster repositories that do not exist locally.
- Ran `bin/repository update`, etc., saw the command apply consistent rules to the rules applied by `PullLocal` and refuse to update non-local repositories it would need to create.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10940
Differential Revision: https://secure.phabricator.com/D15902
Summary: Fixes T9790. This uses a simple renderer, like the inline context renderer, that emphasizes getting a quick glance at small changes and working reasonably on mobile devices.
Test Plan:
- Set `inline` setting to `9999`.
- Created a diff.
- Saw it render reasonably in HTML mail.
- Also tested text mail to make sure I didn't break that.
{F1310137, size=full}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9790
Differential Revision: https://secure.phabricator.com/D15901
Summary:
Ref T10923. Currently, users can disable or enable builtin URIs, but this doesn't actually do anything.
The behavior of "disable" has changed a bit over time and might need some further refinement, but it's currently meaningless for builtin URIs. Prevent adjustment of it. If users want to hide a URI, they should set "Display: Hidden" instead.
Test Plan:
- Disabled/enabled a non-builtin URI.
- Tried to disable a builtin URI, saw greyed out UI and got a helpful error message.
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15899
Summary: Ref T10751. I think this mostly brings us up to date with the state of the world.
Test Plan: Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10751
Differential Revision: https://secure.phabricator.com/D15897
Summary: Ref T10923. Fixes T10955. This was accidentally excluded when I broke the form into pages.
Test Plan: Saw edit field in panel; changed project tags for a repository.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923, T10955
Differential Revision: https://secure.phabricator.com/D15896
Summary: Ref T10751. These workflows have separate `getUser()` and `getViewer()` for weird legacy reasons. `getUser()` is correct.
Test Plan:
- Did a Git SSH push, verified that "Last Writer" reflected the proper user in the "Storage" UI in repository management.
- Grepped for other callsites, double-checked that they used correct users.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10751
Differential Revision: https://secure.phabricator.com/D15893
Summary: Fixes T10952. Fixes T10930. I didn't implement this method correctly when I expanded this field for repositories.
Test Plan: Edited a paste without warnings.
Reviewers: avivey, chad
Reviewed By: chad
Maniphest Tasks: T10930, T10952
Differential Revision: https://secure.phabricator.com/D15892
Summary:
Ref T10923. This makes the "Clone URI" UI a little nicer:
- Show whether each URI is read-only, read-write, or external.
- Clicking the button selects the URI.
- Add a link to manage the appropriate credentials.
Test Plan: {F1308302, size=full}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15891
Summary: Ref T10923. This links up some more related documentation about repository management.
Test Plan: Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15890
Summary: These parameters wrongly extend List.
Test Plan:
Used createdStart field for a search - didn't get error about "should be a list".
`git grep 'extends ConduitListParameterType'`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15881
Summary:
Ref T10923. We sort of dead-end new users creating repositories right now, by dumping them into the manage UI without an obvious way forward.
You can click the crumb to get to the repository, but by default it will say something like `R1` which isn't very obvious.
Add a more obvious navigational link to get to the main view.
Test Plan: {F1308196}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15889
Summary:
Ref T10923. The old behavior was to show a full command in SVN, Mercurial, and Git, like this:
- `git clone <uri>`
- `hg clone <uri>`
- `svn checkout <uri> <directory>`
In Git and Mercurial, the `<uri>` ends in something like `/nice-repository-name.git` so the default directory it creates is called `nice-repository-name/`.
In Subversion, we don't (and can't easily) do that for various reasons so we provide an explicit `<directory>` with the nice name.
In the update, I've changed things to just show the URI. I often found that I wanted the URI alone, not the whole clone command (for example, to `fetch`, `remote-add`, etc). This is also consistent with GitHub. Because we have nice URIs for Git and Mercurial, `git clone <uri>` has good behavior.
In Subversion, `svn checkout <uri>` has bad beahvior (you get a directory named `47/` or whatever). So continue showing the whole command there.
We can possibly tailor this after T4245 finishes up and we get access to `/source/nice-repository-name/` URIs.
Test Plan:
- Viewed a Subversion repository, saw a full command.
- Viewed a Git repository, saw only a clone URI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15888
Summary: Fixes T10948. Ref T10923. Make these rules a little more thorough and document their behavior.
Test Plan: Looked at Diffusion clone URIs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923, T10948
Differential Revision: https://secure.phabricator.com/D15887
Summary: Fixes T10941. This avoids a confusing dead end when configuring Subversion hosting, where `svnserve` will fail to execute hooks if the CWD isn't readable by the vcs-user.
Test Plan:
- Updated and committed in a hosted SVN repository.
- Ran some git operations, too.
- @dpotter confirmed this locally in T10941.
Reviewers: chad
Reviewed By: chad
Subscribers: dpotter
Maniphest Tasks: T10941
Differential Revision: https://secure.phabricator.com/D15879
Summary: Ref T10694. This setting no longer has any effect: we always show a limited amount of context now.
Test Plan: `grep`
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10694
Differential Revision: https://secure.phabricator.com/D15886
Summary: Ref T10923. Although I'd ideally like to get rid of this eventually, keep it around for now.
Test Plan:
- Edited value for an SVN repository.
- Observed no panel present for a Git repository.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15883
Summary: Fixes T10815. We already recovered reasonably from this for cluster repositories, but not for non-cluster repositories.
Test Plan:
- Viewed cluster and non-cluster empty Git repository.
- Viewed cluster and non-cluster empty Mercurial repository.
- Viewed cluster and non-clsuter empty hosted SVN repository.
- Viewed cluster and non-cluster empty observed SVN repository.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10815
Differential Revision: https://secure.phabricator.com/D15878
Summary:
Ref T10923. Fixes T9554.
When hosting a repository, we currently have a heuristic that tries to detect when you're doing an initial import: if you push more than 7 commits to an empty repository, it counts as an import and we disable mail/feed/etc.
Do something similar for observed repositories: if the repository is empty and we discover more than 7 commits, switch to import mode until we catch up.
This should align behavior with user expectation more often when juggling hosted vs imported repositories.
Test Plan:
- Created a new hosted repository.
- Activated it and allowed it to fully import.
- Added an "Observe URI".
- Saw it automatically drop into "Importing" mode until the import completed.
- Swapped it back to hosted mode.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9554, T10923
Differential Revision: https://secure.phabricator.com/D15877
Summary:
Ref T10923. When regenerating the URI index for a repository, index every URI.
- Also, make the index slightly stricter (domain + path instead of just path). Excluding the domain made more sense when we were generating only first-party URIs.
- Make the index smarter about `/diffusion/123/` URIs.
- Show normalized URIs in `diffusion.repository.search` results.
Test Plan:
- Ran migration.
- Verified sensible-looking results in database.
- Searched for a repository URI by first-party clone URI.
- Searched for a repository URI by mirror URI.
- Used `diffusion.repository.search` to get information about repository URIs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15876
Summary: Ref T10923. Walk users through the "create, configure, activate" workflow a little better and set expectations more clearly.
Test Plan:
- Created a new repository, saw new UI help.
- Activated repository, saw onboarding help disappear.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15875
Summary:
Ref T10923.
- Hide "Automation", "Staging" and "Branches" in repositories where they do nothing.
- Fix SVN SSH URIs to read "svn+ssh://" and have proper paths.
Test Plan:
- Verified irrelevant sections did not appear in Subversion in Manage UI.
- Checked out a new hosted SVN repository.
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15874
Summary:
Ref T10923. Fixes T10406. This brings most of the guidance/instructions forward:
- Some remained as instructions.
- Some moved to documentation.
Test Plan: Went through all of the sections and hit the help.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10406, T10923
Differential Revision: https://secure.phabricator.com/D15873
Summary: Ref T10923. This provides a little guidance about hosted vs observed, and points at the `diffusion.ssh-*` options.
Test Plan: Poked around in the web UI, saw useful guidance.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15872
Summary: Ref T10923. This cleans up the remaining "pro" mess left by the cutover.
Test Plan: Viewed, managed, edited a repository.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15871
Summary:
Ref T10923. Primarily documents the process for creating repositories via the API.
Also fixes a couple of issues with `repositoryPHID` not being set yet when creating URIs via the API.
Test Plan:
- Followed all documented steps to create a new repository.
- Created and edited some new URIs from the web workflow, too.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15870
Summary: Ref T10923. This isn't complete yet, but reduces lies and increases truths.
Test Plan: Read documentation, clicked new "Documentation" nav item.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15868
Summary:
Ref T10923. Some of the dialogs ("Deactivate Repository", "Test Automation", etc.) had cancel or redirect URIs which I missed originally.
Go through them and make sure they all point to the right places.
Also removed one unused controller which I missed the first time around.
Test Plan:
- Opened all these dialogs in a new tab with Command-Click.
- Clicked every "cancel" and "submit" button on all of these dialogs.
- Got consistently sent to the place I came from.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15867
Summary:
Ref T10923.
- The "Policy" edit form currently goes "Push, View, Edit". Reorder the defaults to "View, Edit, Push".
- Editing Spaces doesn't currently work: the element appears in the UI, but isn't actually processed when handling transactions. Make that work.
Test Plan:
- Edited a repository policies, saw "View, Edit, Push".
- Moved a repository between Spaces.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15866
Summary:
Ref T10923. Paging wasn't being applied correctly when creating //new// repositories after API changes.
Also, the first redirect after creation wasn't sending users to the right place.
Test Plan:
- Created a new repostiory, got redirected properly.
- Verified that new repostiory flow has the correct fields (name, callsign, etc) and Conduit API has the correct fields (everything).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10923
Differential Revision: https://secure.phabricator.com/D15865
Summary:
Ref T10694. General improvements:
- Remove leading empty lines from context snippets.
- Remove trailing empty lines from context snippets.
- If we removed everything, render a note.
- Try using `style` instead of `<pre>`? My thinking is that maybe Airmail has weird default rules for `<pre>`, since that's the biggest / most obvious thing that's different about this element to me.
Test Plan: Viewed normal comments locally, faked a comment on an empty line in the middle of a lot of other empty lines.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10694
Differential Revision: https://secure.phabricator.com/D15864
Summary:
Ref T10694.
- Shift margins/padding around so inlines with multiple paragraphs get reasonable spacing.
- Add `text-decoration: none` to the "View Inline" link to kill the underline.
Test Plan: {F1265342}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10694
Differential Revision: https://secure.phabricator.com/D15863
Summary: Ref T10694. Move the inline style more toward a mix of standard`<pre>` style and the web UI style for inlines.
Test Plan: See screenshots in comments.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10694
Differential Revision: https://secure.phabricator.com/D15857
Summary: Fixes T10928. This behavior hasn't changed at all and this is what, e.g., `git push --mirror` means, and the other behavior isn't possible, but be more explicit about the inherent destructive potential of mirroring.
Test Plan: Read documentation.
Reviewers: chad, sascha-egerer
Reviewed By: sascha-egerer
Subscribers: sascha-egerer
Maniphest Tasks: T10928
Differential Revision: https://secure.phabricator.com/D15861
Summary:
Ref T10927. Pretty sure the issue is:
- User makes an HTTPS request.
- Load balancer terminates it, but with an `X-Forwarded-Proto` header.
- `secure001` (or whatever; acting as web host) proxies it to `secure002` (or whatever; acting as a repository host). **This** connection is plain HTTP.
- Since this proxied connection is plain HTTP, we check if the repository can serve over "http", but it can't: only "https". So we fail incorrectly, even though the original user request was HTTPS.
In the long run we should probably forward the `X-Forwarded-Proto` header, but that has some weird implications and it's broadly fine to allow either protocol to serve as long as the other one is active: configuration like `security.require-https` is already stronger than these settings.
Test Plan: This is likely only observable in production, but normal cloning still works locally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10927
Differential Revision: https://secure.phabricator.com/D15856
Summary:
Ref T10694. This mostly prevents us from having a degenerate case if someone leaves a 200-line inline.
- For one-line inlines, show 1 line of context above and below (3 lines total).
- For 3+ line inlines, show just the inline.
- For 7+ line inlines, show only the first part.
Test Plan: Made a bunch of weird long/short/different-sized comments, saw reasonble-appearing context in text and HTML mail output.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10694
Differential Revision: https://secure.phabricator.com/D15853
Summary:
Ref T10694. Ref T9790. When generating inline diff context, highlight it and then mangle the highlighted output into `style="..."` so it works in HTML.
Also try to tighten up some spacing/formatting stuff.
Test Plan:
Got some output in this vein:
{F1259937}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9790, T10694
Differential Revision: https://secure.phabricator.com/D15852
Summary:
Ref T10694. This is still missing some pieces, but seems to get most of the data into the mail in a plausible format:
- When an inline remarks on code, show the patch inline in the mail body.
- When an inline replies to another inline, show that other inline in the mail body.
- Apply remarkup rendering to inline content.
- Apply basic styling to mail body blocks.
Not covered yet:
- Syntax highlighting.
- Diff highlighting.
- Maybe clearer style/layout hints to connect comments to what they reply to? Current approach might get messy with inlines that have blockquotes and code blocks inside them, for example.
- I probably want to cap the amount of diff context we ever show to ~7 lines, even if you drag over 200 lines of code.
- CSS is a generally a bit rough still.
- The `unified-comment-context` option is effectively always on now, and should be removed.
- Text section is getting indented right now but probably shouldn't be.
- Spacing, etc., might be a bit off.
Test Plan:
Rigged Home to render these things, got a plausible-looking render (top is text, bottom is HTML):
{F1259052}
Sent myself some inline comment mail, got a plausible result.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10694
Differential Revision: https://secure.phabricator.com/D15850
Summary: Ref T9790. This passes the map down so we can generate highlighted mail.
Test Plan:
Generated this relatively respectable-looking HTML mail:
{F1258558}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9790
Differential Revision: https://secure.phabricator.com/D15848
Summary:
Ref T9790. This prepares the syntax color rules to be reused in mail.
This goes about halfway toward T5701 by sort-of supporting different styles but not really.
Test Plan:
- Ran `bin/celerity syntax` to regenerate syntax map.
- Viewed some highlighted code, didn't see any differences.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9790
Differential Revision: https://secure.phabricator.com/D15846
Summary: Ref T10748. We're returning a `PhabricatorRepositoryURI` here but the code expects an actual `PhutilURI`.
Test Plan:
This should clear this up in production:
```
Daemon 180278 STDE [Wed, 04 May 2016 23:25:16 +0000] [2016-05-04 23:25:16] EXCEPTION: (PhutilProxyException) Error while executing Task ID 1677075. {>} (RuntimeException) Object of class PhabricatorRepositoryURI could not be converted to string at [<phutil>/src/error/PhutilErrorHandler.php:205]
Daemon 180278 STDE [Wed, 04 May 2016 23:25:16 +0000] arcanist(head=master, ref.master=c58f1b9a2507), libcore(), phabricator(head=master, ref.master=29d1115037b8), phutil(head=master, ref.master=0709cd5cfc26), services(head=master, ref.master=04ae8c8f8e3b)
Daemon 180278 STDE [Wed, 04 May 2016 23:25:16 +0000] #0 <#2> PhutilErrorHandler::handleError(integer, string, string, integer, array) called at [<phabricator>/src/applications/repository/storage/PhabricatorRepository.php:1200]
Daemon 180278 STDE [Wed, 04 May 2016 23:25:16 +0000] #1 <#2> PhabricatorRepository::getPublicCloneURI() called at [<phabricator>/src/applications/repository/storage/PhabricatorRepositoryCommit.php:395]
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15844
Summary:
Ref T10748. This needs more extensive testing and is sure to have some rough edges, but seems to basically work so far.
Throwing this up so I can work through it more deliberately and make notes.
Test Plan:
- Ran migration.
- Used `bin/repository list` to list existing repositories.
- Used `bin/repository update <repository>` to update various repositories.
- Updated a migrated, hosted Git repository.
- Updated a migrated, observed Git repository.
- Converted an observed repository into a hosted repository by toggling the I/O mode of the URI.
- Conveted a hosted repository into an observed repository by toggling it back.
- Created and activated a new empty hosted Git repository.
- Created and activated an observed Git repository.
- Updated a mirrored repository.
- Cloned and pushed over HTTP.
- Tried to HTTP push a read-only repository.
- Cloned and pushed over SSH.
- Tried to SSH push a read-only repository.
- Updated several Mercurial repositories.
- Updated several Subversion repositories.
- Created and edited repositories via the API.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15842
Summary:
Ref T10748. This migrates and swaps mirroring to `PhabricatorRepositoryURI`, obsoleting `PhabricatorRepositoryMirror`.
This prevents you from editing, adding or disabling mirrors unless you know a secret URI (until the UI cuts over fully), but existing mirroring is not affected.
Test Plan:
- Added a mirroring URI to an old repository.
- Verified it worked with `bin/repository mirror`.
- Migrated forward.
- Verified it still worked with `bin/repository mirror`.
- Wow, mirroring: https://github.com/epriestley/locktopia-mirror
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15841
Summary:
Ref T10748. In D14250#158181, I accepted this conditional on removing it once Conduit could handle it.
Conduit can now handle it, or at least will be able to as soon as T10748 cuts over.
Test Plan: Grepped for `repository edit`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15839
Summary:
Ref T10748. This has had many problems for a long time, can't create hosted repositories, can't create cluster repositories, etc. It is obsoleted by `diffusion.repository.edit`. Remove it.
(Right now `diffusion.repository.edit` isn't a strict replacement, but it will be as soon as the URI stuff cuts over.)
Test Plan: Grepped for `repository.create`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15838
Summary:
Ref T4039. Long ago these were more freely editable and there were some security concerns around creating a repository, then setting its local path to point somewhere it shouldn't.
Local paths are no longer editable so there's no real reason we need to provide a uniqueness guarantee anymore, but you could still make a mistake with `bin/repository move-paths` by accident, and it's a little cleaner to pull them out into their own column with a key.
(We still don't -- and, largely can't -- guarantee that two paths aren't //equivalent// since one might be symlinked to the other, or symlinked only on some hosts, or whatever, but the primary value here is as a sanity check that you aren't goofing things up and pointing a bunch of repositories at the same working copy by mistake.)
Test Plan:
- Ran migrations.
- Grepped for `local-path`.
- Listed and moved paths with `bin/repository`.
- Created a new repository, verified its local path populated correctly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4039
Differential Revision: https://secure.phabricator.com/D15837
Summary: Seems to work ok, if you give `size=wide` to an image file, we blow it out a bit in DocumentPro mode.
Test Plan:
Test in Phame and Maniphest.
{F1256717}
{F1256718}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15840
Summary:
Ref T10748. These:
- Look nice.
- Hint at panel contents / effects.
- Hint which panels have been customized.
- Allow panels with issues or errors to be highlighted with an alert/attention icon.
Test Plan: {F1256156}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15836
Summary: Ref T10748. This copies existing code in the `CreateController` which will eventually be removed.
Test Plan:
- Created a new repository with the EditPro workflow.
- Saw it come up into the cluster properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15835
Summary:
Fixes T10912. When you drag tasks within a milestone, we currently apply an overbroad, API-focused rule and add the parent board's project. This logic was added fairly recently, as part of T6027, to improve the behavior of API-originated moves.
Later on, this causes the task to toggle in and out of the parent project on every alternate drag.
This logic is also partially duplicated in the `MoveController`.
- Add test coverage for this interaction.
- Fix the logic so it accounts for subproject / milestone columns correctly.
- Put all of the logic into the TransactionEditor, so the API gets the exact same rules.
Test Plan:
- Added a failing test and made it pass.
- Dragged tasks around within a milestone column:
- Before patch: they got bogus project swaps on every other move.
- After patch: projects didn't change (correct).
- Dragged tasks around between normal and milestone columns.
- Before patch: worked properly.
- After patch: still works properly.
Here's what the bad changes look like, the task is swapping projects with every other move:
{F1255957}
The "every other" is because the logic was trying to do this:
- Add both the parent and milestone project.
- Whichever one exists already gets dropped from the change list because it would have no effect.
- The other one then applies.
- In applying, it forces removal of the first one.
- Then this process repeats in the other direction the next time through.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10912
Differential Revision: https://secure.phabricator.com/D15834
Summary:
Ref T10748. This allows an EditEngine form to be broken up into pages.
This is less powerful than `PHUIPagedFormView`, because the pages are not sequential / stateful. Each form saves immediately once it's submitted, and can not take you to a new form or back/forward in a series of forms.
For example, you can't create a workflow where the user fills out 5 pages of information before we create an object, like the current repository workflow does.
However, the only place we've ever wanted to do this is repositories and it's fairly bad there, so I feel reasonably confident we aren't going to miss this in the future.
(We do "choose a type of service/repository/rule -> fill out one page of info" fairly often, but can do this without the full-power paging stuff.)
Test Plan:
- Created a repository usin the new Manage UI, filling out only a handful of fields.
- Edited a repository using the new Manage UI.
- All forms are now EditEngine forms offering paged views of the big huge underlying form:
{F1254371}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15832
Summary:
Ref T10748. Ref T10366. Allows users to set credential for new URIs.
- Ref T7221. Our handling of the "git://" protocol is currently incorrect. This protocol is not authenticated, but is considered an SSH protocol. In the new UI, it is considered an anonymous/unauthenticated protocol instead.
- Ref T10241. This fixes the `PassphraseCredentialControl` so it doesn't silently edit the value if the current value is not visible to you and/or not valid.
Test Plan:
Performed a whole lot of credential edits, removals, and adjustments. I'll give this additional vetting before cutting over to it.
{F1253207}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7221, T10241, T10366, T10748
Differential Revision: https://secure.phabricator.com/D15829
Summary: Fixes T10906, Fixes T10820. Adds new icons, grey-er colors for previous states. Also, I think fixed a few bugs?
Test Plan: Fake each state, verify icon is as intended.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10820, T10906
Differential Revision: https://secure.phabricator.com/D15830
Summary: This is misspelled.
Test Plan: Consulted a dictionary.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15827
Summary:
Ref T10748.
- Allow users to add new URIs by clicking a button instead of knowing a secret URI.
- Validate that URIs are actually valid URIs.
- Add enable/disable action and strings.
Test Plan:
- Created a new URI.
- Tried to create a nonsense URI, created a good URI.
- Enabled/disabled a URI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15825
Summary:
Fixes T10905. This reverts D15823, which didn't work well for tasks with very long titles (the title would break as a block element).
This is slightly more magic but works with long titles.
Test Plan: Did everything from D15823, but also with long titles. Triple-click, wrapping, and mobile/device worked in Safari, Firefox and Chrome.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10905
Differential Revision: https://secure.phabricator.com/D15824
Summary:
Fixes T10905. In Firefox, triple clicking the new headers doesn't select the entire line, so you can't easily copy/paste an entire task title or revision name. It works fine in Safari/Chrome.
This seems to fix that without breaking anything.
Test Plan:
- Viewed headers in Safari, Firefox, Chrome.
- Triple-clicked headers in Safari, Firefox, Chrome.
- Viewed tablet/device layouts in Safari, Firefox, Chrome.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10905
Differential Revision: https://secure.phabricator.com/D15823
Summary: Ref T10748. Adds a "uris" attachment with URI information.
Test Plan: Queried URI information via Conduit, saw reasonable looking information.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15822
Summary: Ref T10748. Brings the rest of the transactions to EditEngine, supports creating via API.
Test Plan:
- Created a URI via API.
- Created a URI via web.
- Tried to apply sneaky transactions, got rejected with good error messages. <_< >_>
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15821
Summary: Ref T10748. Ref T10366. This documents how everything is planned to work shortly.
Test Plan: Read documentation.
Reviewers: chad
Reviewed By: chad
Subscribers: eadler, scode
Maniphest Tasks: T10366, T10748
Differential Revision: https://secure.phabricator.com/D15817
Summary:
Ref T10748.
- New View page for repository URIs.
- Make display and I/O behavior (observe, mirror, read, read/write) editable.
- Add a bunch of checks to prevent you from completely screwing up a repository by making it writable from a bunch of differnet sources.
Test Plan:
{F1249866}
{F1249867}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15816
Summary:
Ref T10748. Ref T10366. This adds a new EditEngine, EditController, Editor, Query, and Transaction for RepositoryURIs.
None of these really do anything helpful yet, and these URIs are still unused in the actual application.
Test Plan: {F1249794}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10366, T10748
Differential Revision: https://secure.phabricator.com/D15815
Summary:
Ref T10748. Allow the new EditEngine workflow to create repositories by giving the user a modal repository type choice upfront.
(The rest of this flow is still confusing/weird, though.)
Test Plan:
- Created a new repository.
{F1249626}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15813
Summary: Ref T10748. This brings the "Actions" items (publish/notify + autoclose enabled) into the new UI.
Test Plan:
- Edited this stuff via EditEngine and Conduit.
- Viewed via new Manage UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15811
Summary: Ref T10748. Makes a "Branches" panel, enables these transactions in the EditEngine.
Test Plan:
- Edited via EditEngine + Conduit.
- Viewed via manage UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15809
Summary: Ref T10748. Port this, add EditEngine support, add some type validation to the transaction.
Test Plan:
- Edited via EditEngine.
- Edited via Conduit.
- Viewed via Management UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15808
Summary:
Ref T10843. There are actually two separate notions of cacheability here:
- Is this cacheable by the browser (e.g., should we emit "Expires: long in the future")?
- Is this cacheable locally (e.g., should we stick it in APC, or just read it off disk every time)?
These got a little mixed up by D15775, so we aren't currently emitting proper "Expires" headers on font files and a few other resource types.
Straighten this out so that we "Expires" these unusual resources correctly.
Test Plan: Verified that `.woff` files get a proper "Expires" header now, not just CSS/JS.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10843
Differential Revision: https://secure.phabricator.com/D15807
Summary: Ref T10748. Brings this forward in the UI and EditEngine.
Test Plan:
- Edited via Conduit.
- Viewed via Manage UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15805
Summary: Ref T10748. Ports this UI and exposes it on the EditEngine.
Test Plan:
- Edited via EditEngine.
- Viewed new manage UI.
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15804
Summary:
Fixes T10778. This is a result of T10262: when we save a form configuration and adjust the policy, we try to scramble attached file secrets.
There aren't going to be any attached files, but there's also no edge table, so we fail.
We could skip this code, but we'll likely need an edge table here sooner or later so it's probably simpler in the long run to just add an empty one.
Test Plan:
- Ran `bin/storage upgrade`, got a clean bill of health.
- Saved a form configuration after making a policy edit, no more `edge` exception.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10778
Differential Revision: https://secure.phabricator.com/D15803
Summary: Ref T4292. This provides at least some sort of hint about how to set up cluster repositories.
Test Plan:
- Read documentation.
- Ran `bin/repository clusterize` to add + remove clusters.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15798
Summary:
Ref T10866. Fixes T10386. This attempts to make it a little more plausible to follow these directions:
- Use simpler language in general.
- Remove language suggesting that HTTP requires no additional configuration.
- Suggest using a load balancer or an ugly port number instead of swapping SSH to a different port.
- Be more granular about `sudo` setup.
- Organize better?
Test Plan: Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10386, T10866
Differential Revision: https://secure.phabricator.com/D15796
Summary:
Fixes T10876. Currently, we can end up with a setup warning banner sticking on each web device, since the state is stored in local cache.
Instead:
- When we actually run the setup checks, save the current state in the database.
- Before we show a cached banner, make sure the database still says the checks are a problem.
This could lead to some inconsistencies if setup checks legitimately pass on some hosts but not on others. For example, if you have `git` installed on one machine but not on another, we may raise a setup warning ("No Git Binary!") about it on one host only.
For now, assume users have their operational environments in some sort of reasonable shape and can install the same stuff everywhere. In the future, we could split the issues into "global" and "per-host" issues if we run into problems with this.
Test Plan:
This is somewhat tricky to test locally since you really need multiple webservers to test it properly, but I:
- Created some setup issues, saw banner.
- Ignored/cleared them, saw banner go away.
- Verified database cache writes were occurring properly.
Then I sort of faked it like this:
- Created a setup issue.
- Manually set the database cache value to `[]` ("no issues").
- Reloaded page.
- No more banner.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10876
Differential Revision: https://secure.phabricator.com/D15802
Summary: Ref T10748. Brings this over and adds EditEngine support for it.
Test Plan: Viewed and edited staging area information.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15801
Summary: Ref T10748. This merges "Storage" and "Cluster" into a single UI which combines the information of both.
Test Plan: {F1246882}
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15800
Summary:
Ref T10849. This enforces a global 30-second per-query time limit for anything not coming from the CLI.
If we run into another issue with MySQL hanging in the future, this should prevent it from being nearly as bad as it was.
Test Plan:
- Set value to 0, verified the UI threw an exception immediately.
- Set value back to 30, browsed around a bunch of pages.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10849
Differential Revision: https://secure.phabricator.com/D15799
Summary:
Ref T4292. This is a required step in configuring a cluster: document and explain it.
Previously `bin/almanac register` could //also// add and trust keys. I've removed this capability since I think it's needless and complicated. If there's some real use for it eventually, we could add a `bin/almanac add-key` or whatever. The workflow is simpler and has better guard rails that point you in the correct direction now.
Test Plan:
- Read documentation.
- Ran `bin/almanac` with various good/bad flags.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15795
Summary: This gets over-escaped instead of bolded right now, but I only ever hit it when exporting/importing and never both cleaning it up.
Test Plan: Ran `bin/repository move-paths`, saw bolded "Move" instead of ANSI escape sequences.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15797
Summary:
Ref T10860. This allows us to recover if the connection to the database is lost during a push.
If we lose the connection to the master database during a push, we would previously freeze the repository. This is very safe, but not very operator-friendly since you have to go manually unfreeze it.
We don't need to be quite this aggressive about freezing things. The repository state is still consistent after we've "upgraded" the lock by setting `isWriting = 1`, so we're actually fine even if we lost the global lock.
Instead of just freezing the repository immediately, sit there in a loop waiting for the master to come back up for a few minutes. If it recovers, we can release the lock and everything will be OK again.
Basically, the changes are:
- If we can't release the lock at first, sit in a loop trying really hard to release it for a while.
- Add a unique lock identifier so we can be certain we're only releasing //our// lock no matter what else is going on.
- Do the version reads on the same connection holding the lock, so we can be sure we haven't lost the lock before we do that read.
Test Plan:
- Added a `sleep(10)` after accepting the write but before releasing the lock so I could run `mysqld stop` and force this issue to occur.
- Pushed like this:
```
$ echo D >> record && git commit -am D && git push
[master 707ecc3] D
1 file changed, 1 insertion(+)
# Push received by "local001.phacility.net", forwarding to cluster host.
# Waiting up to 120 second(s) for a cluster write lock...
# Acquired write lock immediately.
# Waiting up to 120 second(s) for a cluster read lock on "local001.phacility.net"...
# Acquired read lock immediately.
# Device "local001.phacility.net" is already a cluster leader and does not need to be synchronized.
# Ready to receive on cluster host "local001.phacility.net".
Counting objects: 3, done.
Delta compression using up to 8 threads.
Compressing objects: 100% (2/2), done.
Writing objects: 100% (3/3), 254 bytes | 0 bytes/s, done.
Total 3 (delta 1), reused 0 (delta 0)
BEGIN SLEEP
```
- Here, I stopped `mysqld` from the CLI in another terminal window.
```
END SLEEP
# CRITICAL. Failed to release cluster write lock!
# The connection to the master database was lost while receiving the write.
# This process will spend 300 more second(s) attempting to recover, then give up.
```
- Here, I started `mysqld` again.
```
# RECOVERED. Link to master database was restored.
# Released cluster write lock.
To ssh://local@localvault.phacility.com/diffusion/26/locktopia.git
2cbf87c..707ecc3 master -> master
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10860
Differential Revision: https://secure.phabricator.com/D15792
Summary:
Ref T10860. At least in Git over SSH, we can freely echo a bunch of stuff to stderr and Git will print it to the console, so we can tell users what's going on.
This should make debugging, etc., easier. We could tone this down a little bit once things are more stable if it's a little too chatty.
Test Plan:
```
$ echo D >> record && git commit -am D && git push
[master ca5efff] D
1 file changed, 1 insertion(+)
# Push received by "local001.phacility.net", forwarding to cluster host.
# Waiting up to 120 second(s) for a cluster write lock...
# Acquired write lock immediately.
# Waiting up to 120 second(s) for a cluster read lock on "local001.phacility.net"...
# Acquired read lock immediately.
# Device "local001.phacility.net" is already a cluster leader and does not need to be synchronized.
# Ready to receive on cluster host "local001.phacility.net".
Counting objects: 3, done.
Delta compression using up to 8 threads.
Compressing objects: 100% (2/2), done.
Writing objects: 100% (3/3), 256 bytes | 0 bytes/s, done.
Total 3 (delta 1), reused 0 (delta 0)
To ssh://local@localvault.phacility.com/diffusion/26/locktopia.git
8616189..ca5efff master -> master
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10860
Differential Revision: https://secure.phabricator.com/D15791
Summary: Ref T10860. This doesn't change anything, it just separates all this stuff out of `PhabricatorRepository` since I'm planning to add a bit more state to it and it's already pretty big and fairly separable.
Test Plan: Pulled, pushed, browsed Diffusion.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10860
Differential Revision: https://secure.phabricator.com/D15790
Summary:
Fixes T10865.
- Mock descriptions did not markup.
- Image descriptions did not get a proper container `<div />`.
Test Plan:
- Created a mock with remarkup in the mock description and in an image description.
- Viewed mock detail.
- Saw list styles render properly in both mock description and image description.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10865
Differential Revision: https://secure.phabricator.com/D15793
Summary: Fixes T9560. We suggest a root-owned location, but users who choose their own location instead can run into trouble.
Test Plan:
- Changed parent directory to have an non-root owner, verified that `ssh` no longer worked.
- Changed parent directory back to a root owner, verified `ssh` worked again.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9560
Differential Revision: https://secure.phabricator.com/D15794
Summary: Fixes T10863. See that task for discussion.
Test Plan:
- Configured `aphlict` with no "logs".
- Started `aphlict`.
- Before change: exception.
- After change: worked.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10863
Differential Revision: https://secure.phabricator.com/D15788
Summary: Fixes T10857. This documentation did not accurately reflect proper configuration: in the Aphlict config, SSL is inferred from the presence of `ssl.*` configuration.
Test Plan: Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10857
Differential Revision: https://secure.phabricator.com/D15787
Summary:
Ref T4292. Sometimes, we may not have a working copy for a repository. The easiest way to get into this condition is to deactivate a repository.
We could try to clone + fetch in this case, but that's kind of complex, and there's an easy command that administrators can run manually. For now, just tell them to do that.
This affects the inactive repositories on `secure`, like rGITCOINS.
Test Plan: Removed working copy, got message.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15786
Summary:
Ref T7789. Currently, we use different viewers if you have `security.alternate-file-domain` configured vs if you do not.
This is largely residual from the days of one-time-tokens, and can cause messy configuration-dependent bugs like the one in T7789#172057.
Instead, always use the omnipotent viewer. Knowledge of the secret key alone is sufficient to access a file.
Test Plan:
- Disabled `security.alternate-file-domain`.
- Reproduced an issue similar to the one described on T7789.
- Applied change.
- Clean LFS interaction.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7789
Differential Revision: https://secure.phabricator.com/D15784
Summary:
Ref T4292. When the daemons make a query for repository information, we need to make sure the working copy on disk is up to date before we serve the response, since we might not have the inforamtion we need to respond otherwise.
We do this automatically for almost all Diffusion methods, but this particular method is a little unusual and does not get this check for free. Add this check.
Test Plan:
- Made this code throw.
- Ran `bin/repository reparse --message ...`, saw the code get hit.
- Ran `bin/repository lookup-user ...`, saw this code get hit.
- Made this code not throw.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15783
Summary: I've possibly seen a couple of `aphlict` processes exit under suspicious circumstances (maybe?). Make sure any PHP errors get captured into the log.
Test Plan:
- Added an exception after forking.
- Before change: vanished into thin air.
- After change: visible in the log.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15782
Summary:
Fixes T10843. In a multi-server setup, we can do this:
- Two servers, A and B.
- You push an update.
- A gets pushed first.
- After A has been pushed, but before B has been pushed, a user loads a page from A.
- It generates resource URIs like `/stuff/new/package.css`.
- Those requests hit B.
- B doesn't have the new resources yet.
- It responds with old resources.
- Your CDN caches things. You now have a poisoned CDN: old data is saved in a new URL.
To try to avoid this with as little work as possible and generally make it hard to get wrong, check the URL hash against the hash we would generate.
If they don't match, serve our best guess at the resource, but don't cache it. This should make things mostly keep working during the push, but prevent caches from becoming poisoned, and everyone should get a working version of everything after the push finishes.
Test Plan:
- `curl`'d a resource, got a cacheable one.
- Changed the hash a little, `curl`'d again. This time: valid resource, but not cacheable.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10843
Differential Revision: https://secure.phabricator.com/D15775
Summary: Ref T4292. This adds a new high-level overview panel.
Test Plan: {F1238854}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15772
Summary: Fixes T8897
Test Plan: Open any list view of Calendar events, every event should only show "Attending: ..." with users who are attending event.
Reviewers: chad, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T8897
Differential Revision: https://secure.phabricator.com/D15779
Summary: This still wasn't quite right -- a link like `[[ Porcupine Facts ]]` with a space would not lookup correctly, and would render as `porcupine_facts`.
Test Plan: Verified that `[[ Porcupine Facts ]]` now works correctly.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15780
Summary: Some of these had the wrong `@group` header.
Test Plan: `grep`
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15778
Summary: Fixes T10845.
Test Plan: Verified that `[[ quack ]]` and `[[ QUACK ]]` both work. Previously, the link had to exactly match the capitalization of the target.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10845
Differential Revision: https://secure.phabricator.com/D15777
Summary: Fixes T10844. After recent changes to Aphlict (T6915 and T10697), `./bin/status` needs to be aware of the configuration file. As such, it is now necessary to run `./bin/aphlict status --config /path/to/config.json` rather than `./bin/aphlict status`.
Test Plan: Ran `./bin/aphlict start ...` and `./bin/aphlict status` and saw "Aphlict (`$PID`) is running".
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T10844
Differential Revision: https://secure.phabricator.com/D15776
Summary:
Fixes T8952. When Herald changes subscribers, it is zzzzz very boring.
When users change subscribers, it is still super boring (more boring than a merge, for example).
Test Plan: Viewed feed, saw fewer Herald stories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8952
Differential Revision: https://secure.phabricator.com/D15774
Summary:
Ref T8952. Currently, when an application (most commonly Herald, but sometimes Drydock, Diffusion, etc) publishes a feed story, we get an empty grey box for it in feed.
Instead, give the story a little application icon kind of "profile picture"-like thing.
Test Plan:
Here's how it looks:
{F1239003}
Feel free to tweak/counter-diff.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8952
Differential Revision: https://secure.phabricator.com/D15773
Summary:
Ref T10751. Add support tooling for manually prying your way out of trouble if disaster strikes.
Refine documentation, try to refer to devices as "devices" more consistently instead of sometimes calling them "nodes".
Test Plan: Promoted and demoted repository devices with `bin/repository thaw`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10751
Differential Revision: https://secure.phabricator.com/D15768
Summary:
Ref T10751. Make the UI more useful and explain what failure states mean and how to get out of them.
The `bin/repository thaw` command does not exist yet, I'll write that soon.
Test Plan: {F1238241}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10751
Differential Revision: https://secure.phabricator.com/D15766
Summary: Fixes T10744
Test Plan: Create recurring event, cancel one instance, cancel the parent event, reinstate event. Wording in the reinstating dialog should be clear about reinstating only instances that haven't been individually cancelled.
Reviewers: chad, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T10744
Differential Revision: https://secure.phabricator.com/D15770
Summary: This is completely obsoleted by `owners.search`. See D15472.
Test Plan: Viewed API method in UI console.
Reviewers: avivey, chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15769
Summary:
Fixes T10840. When rendering mail, this rule wasn't falling through in quite the right way.
Also adjust where the rules are for this so the special styles show up in Maniphest, etc.
Test Plan:
Made this comment:
{F1238266}
Which produced this HTML:
{F1238267}
...and sent this mail:
{F1238283}
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T10840
Differential Revision: https://secure.phabricator.com/D15767
Summary: Ref T10751. This cleans this up so it's a little more modern, and fixes a possible bad access on the log detail page.
Test Plan: Viewed push log list, viewed push log detail.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10751
Differential Revision: https://secure.phabricator.com/D15765
Summary: Ref T10751. There are still some missing support tools here, but explain some of this a little better.
Test Plan: Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10751
Differential Revision: https://secure.phabricator.com/D15764
Summary:
Ref T10751. Provide some guidance on replicas and promotion.
I'm not trying to walk administrators through the gritty details of this. It's not too complex, they should understand it, and the MySQL documentation is pretty thorough.
Test Plan: Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10751
Differential Revision: https://secure.phabricator.com/D15763
Summary: This will stop breaking if you have subscribers and tags when updating a revision (`Error parsing field "Subscribers": The objects you have listed include objects which do not exist (Tags:)`), which I broke in D15749.
Test Plan: run through arc-diff --update that failed earlier.
Reviewers: chad, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15762
Summary:
Ref T4292. Right now, repository versions only get marked when a write happens.
This potentially creates a problem: if I pushed all the sync code to `secure` and enabled `secure002` as a repository host, the daemons would create empty copies of all the repositories on that host.
Usually, this would be fine. Most repositories have already received a write on `secure001`, so that working copy has a verison and is a leader.
However, when a write happened to a rarely-used repository (say, rKEYSTORE) that hadn't received any write recently, it might be sent to `secure002` randomly. Now, we'd try to figure out if `secure002` has the most up-to-date copy of the repository or not.
We wouldn't be able to, since we don't have any information about which node has the data on it, since we never got a write before. The old code could guess wrong and decide that `secure002` is a leader, then accept the write. Since this would bump the version on `secure002`, that would //make// it an authoritative leader, and `secure001` would synchronize from it passively (or on the next read or write), which would potentially destroy data.
Instead:
- Refuse to continue in situations like this.
- When a repository is on exactly one device, mark it as a leader with version "0".
- When a repository is created into a cluster service, mark its version as "0" on all devices (they're all leaders, since the repository is empty).
This should mean that we won't lose data no matter how much weird stuff we run into.
Test Plan:
- In single-node mode, used `repository update` to verify that `0` was written properly.
- With multiple nodes, used `repository update` to verify that we refuse to continue.
- Created a new repository, verified versions were initialized correctly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15761
Summary: Ref T4292. When we write a push log, also log which node received the request.
Test Plan: {F1230467}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15759
Summary:
Ref T4292. We currently synchronize hosted, clustered, Git repositories when we receive an SSH pull or push.
Additionally:
- Synchronize before HTTP reads and writes.
- Synchronize reads before Conduit requests.
We could relax Conduit eventually and allow Diffusion to say "it's OK to give me stale data".
We could also redirect some set of these actions to just go to the up-to-date host instead of connecting to a random host and synchronizing it. However, this potentially won't work as well at scale: if you have a larger number of servers, it sends all of the traffic to the leader immediately following a write. That can cause "thundering herd" issues, and isn't efficient if replicas are in different geographical regions and the write just went to the east coast but most clients are on the west coast. In large-scale cases, it's better to go to the local replica, wait for an update, then serve traffic from it -- particularly given that writes are relatively rare. But we can finesse this later once things are solid.
Test Plan:
- Pushed and pulled a Git repository over HTTP.
- Browsed a Git repository from the web UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15758
Summary:
Ref T4292. Before we write or read a hosted, clustered Git repository over SSH, check if another version of the repository exists on another node that is more up-to-date.
If such a version does exist, fetch that version first. This allows reads and writes of any node to always act on the most up-to-date code.
Test Plan: Faked my way through this and got a fetch via `bin/repository update`; this is difficult to test locally and needs more work before we can put it in production.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15757
Summary:
Ref T4292. When you run `git fetch` and connect to, say, `repo001.west.company.com`, we'll look at the current version of the repository in other nodes in the cluster.
If `repo002.east.company.com` has a newer version of the repository, we'll fetch that version first, then respond to your request.
To do this, we need to run `git fetch repo002.east.company.com ...` and have that connect to the other host and be able to fetch data.
This change allows us to run `PHABRICATOR_AS_DEVICE=1 git fetch ...` to use device credentials to do this fetch. (Device credentials are already supported and used, they just always connect as a user right now, but these fetches should be doable without having a user. We will have a valid user when you run `git fetch` yourself, but we won't have one if the daemons notice that a repository is out of date and want to update it, so the update code should not depend on having a user.)
Test Plan:
```
$ PHABRICATOR_AS_DEVICE=1 ./bin/ssh-connect local.phacility.com
Warning: Permanently added 'local.phacility.com' (RSA) to the list of known hosts.
PTY allocation request failed on channel 0
phabricator-ssh-exec: Welcome to Phabricator.
You are logged in as device/daemon.phacility.net.
You haven't specified a command to run. This means you're requesting an interactive shell, but Phabricator does not provide an interactive shell over SSH.
Usually, you should run a command like `git clone` or `hg push` rather than connecting directly with SSH.
Supported commands are: conduit, git-lfs-authenticate, git-receive-pack, git-upload-pack, hg, svnserve.
Connection to local.phacility.com closed.
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15755
Summary:
Ref T4292. This consolidates code for figuring out which user we should connect to hosts with.
Also narrows a lock window.
Test Plan: Browsed Diffusion, pulled and pushed through an SSH proxy.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15754
Summary:
In calendar, dashboard, diffusion, diviner, feed, fund,
maniphest, pholio, ponder, and slowvote use the term 'tags' if possible.
This intenctionally skips diffusion, differential, and the projects application itself.
Ref T10326 Ref T10349
Test Plan: inspection on a running, locally modified, system
Reviewers: avivey, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T10835, T10326, T10349
Differential Revision: https://secure.phabricator.com/D15753
Summary:
Ref T10832. In practice, `git --version` is not a useful test for this issue:
- Vendors like Debian have backported the patch into custom versions like `0.0.0.1-debian-lots-of-patches.3232`.
- Vendors like Ubuntu distribute multiple different versions which report the same string from `git --version`, some of which are patched and some of which are not.
In other cases, we can perform an empirical test for the vulnerability. Here, we can not, because we can't write a 2GB path in a reasonable amount of time.
Since vendors (other than Apple) //generally// seem to be on top of this and any warning we try to raise based on `git --version` will frequently be incorrect, don't raise this warning.
I'll note this in the changelog instead.
Test Plan: Looked at setup issues, no more warning for vulnerable git version.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10832
Differential Revision: https://secure.phabricator.com/D15756
Summary:
Ref T4292. Ref T10366. Depends on D15751. Today, generating repository commands is purely a function of the repository, so they use protocols and credentials based on the repository configuration.
For example, a repository with an SSH "remote URI" always generate SSH "remote commands".
This needs to change in the future:
- After T10366, repositories won't necessarily just have one type of remote URI. They can only have one at a time still, but the repository itself won't change based on which one is currently active.
- For T4292, I need to generate intracluster commands, regardless of repository configuration. These will have different protocols and credentials.
Prepare for these cases by separating out command construction, so they'll be able to generate commands in a more flexible way.
Test Plan:
- Added unit tests.
- Browsed diffusion.
- Ran `bin/phd debug pull` to pull a bunch of repos.
- Ran daemons.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292, T10366
Differential Revision: https://secure.phabricator.com/D15752
Summary:
Trigger daemon is trying to find the next event to invoke before sleeping, but the query includes already-elapsed triggers.
It then tries to sleep for 0 seconds.
Test Plan:
On a new instance, schedule a single trigger of type `PhabricatorOneTimeTriggerClock` to a very near time.
Use top to see trigger daemon not going to 100% CPU once the event has elapsed.
Reviewers: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15750
Summary: Users can't find the "Tags" field in the Edit Menu; Added keyword "Tag".
Test Plan: Looked in Edit page; I think this shouldn't change anything else?
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15749
Summary: Ref T4292. This will let the UI and future `bin/repository` tools give administrators more tools to understand problems when reporting or resolving them.
Test Plan:
- Pushed fully clean repository.
- Pushed previously-pushed repository.
- Forced write to abort, inspected useful information in the database.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15748
Summary:
Ref T4292. Small fixes:
- There was a bug with the //first// write, where we'd write 1 but expect 0. Fix this.
- Narrow the window where we hold the `isWriting` lock: we don't need to wait for the client to finish.
- Release the lock even if something throws.
- Use a more useful variable name.
Test Plan:
- Made new writes to a fresh cluster repository.
- Made sequential writes.
- Made concurrent writes.
- Made good writes and bad writes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15747
Summary:
Fixes T10830.
- The return code from `storage adjust` did not propagate correct.
- There was one column issue which I missed the first time around because I had a bunch of unrelated stuff locally.
Test Plan:
- Ran `bin/storage upgrade -f` with failures, used `echo $?` to make sure it exited nonzero.
- Got fully clean `bin/storage adjust` by dropping all my extra local tables.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10830
Differential Revision: https://secure.phabricator.com/D15746
Summary: Ref T10832. Raise a setup warning for out-of-date versions of `git`.
Test Plan: {F1224632}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10832
Differential Revision: https://secure.phabricator.com/D15745
Summary:
Fixes T10830. Ref T10366. I wasn't writing to this table yet so I didn't build it, but the fact that `bin/storage adjust` would complain slipped my mind.
- Add the table.
- Make the tests run `adjust`. This is a little slow (a few extra seconds) but we could eventually move some steps like this to run server-side only.
Test Plan: Ran `bin/storage upgrade -f`, got a clean `adjust`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10366, T10830
Differential Revision: https://secure.phabricator.com/D15744
Summary:
Ref T10748. This supports more transaction types in the modern editor and improves validation so Conduit benefits.
You can technically create repositories via `diffusion.repository.edit` now, although they aren't very useful.
Test Plan:
- Used `diffusion.repository.edit` to create and edit repositories.
- Used `/editpro/` to edit repositories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15740
Summary: Ref T10748. Ref T10366. No support for editing and no impact on the UI, but get some of the basics in place.
Test Plan: {F1223279}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10366, T10748
Differential Revision: https://secure.phabricator.com/D15742
Summary: Ref T10748. Pretty straightforward. I'd like to put a little "!" icon in the menu if there's a warning/error eventually, but can deal with that latre.
Test Plan: {F1223096}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15741
Summary:
Ref T10748. This is roughly where I'm headed, if it makes some kind of sense? The "Edit" links in sub-sections don't work yet since I haven't built the thing.
Probably depends on D15736.
Test Plan: Manually navigated to `/manage/`, clicked around.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15737
Summary: Ref T10748. Ref T10337. This technically implements this stuff, but it does not do anything useful yet. This skips all the hard stuff.
Test Plan:
- Technically used `diffusion.repository.search` to get repository information.
- Technically used `diffusion.repository.edit` to change a repository name.
- Used `editpro/` to edit a repository name.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10337, T10748
Differential Revision: https://secure.phabricator.com/D15736
Summary: This error message is pointless and dead-ends logged-in users needlessly if they're sent to the register page by documentation or Advanced Enterprise Sales Funnels.
Test Plan: Visited `/auth/register/` while logged in, was sent home.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15739
Summary: Also make `../` work to start relative a link so I don't have to document it as `./../path`.
Test Plan:
- Used `./`, `../`. `./../`, and normal links (proper title pickup).
- Used bad links (red).
- Regenerated documentation:
{F1221692}
Reviewers: hach-que
Reviewed By: hach-que
Differential Revision: https://secure.phabricator.com/D15734
Summary:
Fixes T9716. Doesn't go into too much detail, but will hopefully
save some pain.
Test Plan: Read all the wonderful text.
Reviewers: #blessed_committers, epriestley, #blessed_reviewers
Reviewed By: #blessed_committers, epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T9716
Differential Revision: https://secure.phabricator.com/D15738
Summary: Ref T7691 (errata). This shows links to Phriction documents in red if they're missing, and links to Phriction documents in grey with a lock icon if the user doesn't have the correct permissions to see the document.
Test Plan:
Tested a bunch of different configurations:
```
[[ ./../ ]] Back to Main Document
[[ ./../subdocument_2]] Mmmm more documents
[[ ./../invisible_document]] Mmmm more documents
[[ ./../ | Explicit Title ]] Back to Main Document
[[ ./../subdocument_2 | Explicit Title ]] Mmmm more documents
[[ ./../invisible_document | Explicit Title ]] Mmmm more documents
[[ ]] Absolute link
[[ subdocument_2 ]] Absolute link
[[ invisible_document ]] Absolute link
[[ | Explicit Title ]] Absolute link
[[ subdocument_2 | Explicit Title ]] Absolute link
[[ invisible_document | Explicit Title ]] Absolute link
```
Got the expected result:
{F1221106}
Reviewers: epriestley, chad, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T7691
Differential Revision: https://secure.phabricator.com/D15733
Summary:
Resolves T7691. This turned out more complex than I really wanted, mainly because I needed to feed the slug information through to both the document renderer and the preview window that appears in the edit controller.
After this change, you can now create relative links in Phriction by doing `[[ ./../some/relative/path ]]`. Relative paths aren't handled anywhere else (they'll still render, but the dots are turned into a literal 'dot' as per existing behaviour).
Test Plan: Created some Phriction documents with relative links, saw them all link correctly.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T7691
Differential Revision: https://secure.phabricator.com/D15732
Summary:
This nearly works but I didn't have time to get back to it and it isn't stable enough to turn on in the cluster yet.
We have enough other stuff going out this week, so just disable it before `stable` gets cut. Should be ready by next week if things go well.
Test Plan: Fetched a Git SSH repo locally.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15731
Summary: Ref T10697. I missed this so it isn't reading the new config properly.
Test Plan: Ran `bin/aphlict stop`, saw it read config.
Reviewers: chad, Mnkras
Reviewed By: Mnkras
Subscribers: Mnkras
Maniphest Tasks: T10697
Differential Revision: https://secure.phabricator.com/D15729
Summary: Fixes T9348. If you have edit permission, you can kick people out of a room.
Test Plan:
- Kicked people out of a room.
- As an unprivileged user, wasn't able to kick people out of a room.
- Hit most (all?) of the various weird dialog sub-cases.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9348
Differential Revision: https://secure.phabricator.com/D15728
Summary: Fixes T6806. We haven't seen users having issues with `phd.user` in a very long time.
Test Plan:
- Configured daemons to run as `notepriestley`, got a well-explained exception.
- Configured daemons to run as `epriestley`, got a clean start.
- Configured daemons with `phd.user=null`, got a clean start.
Reviewers: chad, areitz
Reviewed By: areitz
Subscribers: areitz
Maniphest Tasks: T6806
Differential Revision: https://secure.phabricator.com/D15726
Summary:
Ref T10756. This:
- Fixes T7307. This UI is now admin-only.
- Makes the main "running daemons" table more useful for multi-host setups (show where daemons are running).
- Removes logs from the web UI: these are sometimes vaguely sensitive and shouldn't be visible. The UI tells you how to get them with `bin/phd log`.
- Minor modernization.
Test Plan:
- As a non-admin, viewed daemons (access error) and bulk jobs (worked great).
- Browsed bulk job pages.
- Ran a bulk job.
- Viewed daemon console.
- Viewed task detail / daemon detail / daemon list pages.
{F1220516}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7307, T10756
Differential Revision: https://secure.phabricator.com/D15724
Summary: Fixes T10706
Test Plan: Open UI Example of badges. Shouldn't be broken
Reviewers: epriestley, #blessed_reviewers, chad
Reviewed By: #blessed_reviewers, chad
Subscribers: Korvin
Maniphest Tasks: T10706
Differential Revision: https://secure.phabricator.com/D15723
Summary:
Fixes T9385. This was accidentally mangled a bit a long time ago by D12797, which was a 1,000-file change which got almost everything right.
Simplify the message and fix all the `%s` conversions and how they map to parameters.
Test Plan: {F1220400}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9385
Differential Revision: https://secure.phabricator.com/D15722
Summary:
Fixes T7475. If you do something like:
$ umask 123
$ ./bin/phd start
...the daemons might inherit the weird umask, do a `git fetch` with the weird umask, and end up creating files with weird permissions in repositories.
Instead, just normalize the umask to 022 in all cases. This is overwhelmingly the most common setting, and the one we assume things are configured with.
(When we want to force permissions to a certain setting, we do so explicitly.)
Test Plan:
- Added `var_dump(umask())` to observe umask.
- Ran `bin/phd`, saw proper umask (`18`, which is decimal of `022` octal).
- Set `umask 123`, then ran `bin/phd`, saw it correct properly again.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7475
Differential Revision: https://secure.phabricator.com/D15721
Summary:
Ref T10696. By default, `node` uses 1.5GB, which is enormous overkill for this service and can crowd out other services if it's running next to things like a database on the same host.
Provide a configuration option to adjust it via `--max-old-space-size` and default to 256MB. It only seems to need about 30M locally, so this should be plenty of headroom.
Test Plan:
Ran `bin/aphlict debug`, things seemed OK.
It takes a long time (days?) to grow to 1.5GB so I can't easily test this locally without a lot of work, but I'll keep an eye on it in production.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10696
Differential Revision: https://secure.phabricator.com/D15720
Summary: Fixes T10816. The way these work is a little unusual since these chunks of file-rendering code are unusuall performance-sensitive, so the Differential version doesn't adapt directly to Diffusion. Both can possibly be unified at some point in the future, although they do slightly different things.
Test Plan: {F1220170}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10816
Differential Revision: https://secure.phabricator.com/D15719
Summary: This is mistaken.
Test Plan: Careful inspection, `grep` for other mistakes.
Reviewers: chad, eadler
Reviewed By: eadler
Differential Revision: https://secure.phabricator.com/D15717
Summary: These flags do slightly different things, I actually want --master-data here. My test databases are setup half-weird and work with either statement, which is why I missed this.
Test Plan: Ran a dump against master, got the right CHANGE MASTER statement with no warnings.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15716
Summary:
Ref T6915. This allows multiple notification servers to talk to each other:
- Every server has a list of every other server, including itself.
- Every server generates a unique fingerprint at startup, like "XjeHuPKPBKHUmXkB".
- Every time a server gets a message, it marks it with its personal fingerprint, then sends it to every other server.
- Servers do not retransmit messages that they've already seen (already marked with their fingerprint).
- Servers learn other servers' fingerprints after they send them a message, and stop sending them messages they've already seen.
This is pretty crude, and the first message to a cluster will transmit N^2 times, but N is going to be like 3 or 4 in even the most extreme cases for a very long time.
The fingerprinting stops cycles, and stops servers from sending themselves copies of messages.
We don't need to do anything more sophisticated than this because it's fine if some notifications get lost when a server dies. Clients will reconnect after a short period of time and life will continue.
Test Plan:
- Wrote two server configs.
- Started two servers.
- Told Phabricator about all four services.
- Loaded Chrome and Safari.
- Saw them connect to different servers.
- Sent messages in one, got notifications in the other (magic!).
- Saw the fingerprinting stuff work on the console, no infinite retransmission of messages, etc.
(This pretty much just worked when I ran it the first time so I probably missed something?)
{F1218835}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6915
Differential Revision: https://secure.phabricator.com/D15711
Summary:
Fixes T10758.
- Adds a "--host" flag. If you specify this, we read your cluster config. This lets you dump from a replica.
- Adds a "--for-replica" flag to `storage dump`. This makes `mysqldump` include a `CHANGE MASTER ...` statement in the output, which is useful when setting up a replica for the first time.
Test Plan:
- Dumped master and replica cluster databases.
- Dumped non-cluster databases.
- Ran various other commands (help, status, etc).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10758
Differential Revision: https://secure.phabricator.com/D15714
Summary: Fixes T10812. Make it easier to disambiguate great passwords like `iI|l1oO()thenumber1nospellitout`.
Test Plan: {F1219074}
Reviewers: chad, yelirekim
Reviewed By: yelirekim
Maniphest Tasks: T10812
Differential Revision: https://secure.phabricator.com/D15715
Summary: Updating the subproject and member pages in Projects to new UI
Test Plan: Visit a subproject parent page, visit members pages
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15687
Summary: Default to "All" (maybe "Active" in the future). Adds more info to results.
Test Plan: visit /phurl/, see additional information about URL
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15713
Summary: Fixes T10806. Although browsers don't seem to care about this, it's more correct to support it, and the new test console uses normal `cURL` and does care.
Test Plan:
- Hit the error case for providing a chain but no key/cert.
- Used `openssl s_client -connect localhost:22280` to connect to local Aphlict servers.
- With SSL but no chain, saw `openssl` fail to verify the remote.
- With SSL and a chain, saw `openssl` verify the identify of the remote.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10806
Differential Revision: https://secure.phabricator.com/D15709
Summary: Typo fix from D15703 that I overlooked.
Test Plan: Careful inspection.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15708
Summary:
Ref T10809. Currently, both the proxy and target may mutate URIs (rewriting "svn+ssh://x/diffusion/Y/" to a path on disk).
I believe this previously worked by fate/chance/luck since both URI variants contain the repository information, but the algorithms were tightened up recently with callsign removal.
Stop rewriting them if we're the intracluster proxy -- they only need to be rewritten on the target host.
Test Plan:
- Checked out a proxied SVN repository, with and without a callsign.
- Checked out an unproxied SVN repository, with and without a callsign.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10809
Differential Revision: https://secure.phabricator.com/D15712
Summary:
Fixes T10783 (what little of it remains). Ref T10697.
Aphlict currently uses request paths for two different things:
- multi-tenant instancing in the Phacility cluster (each instance gets its own namespace within an Aphlict server);
- some users configure nginx and apache to do proxying or SSL termination based on the path.
Currently, these can collide.
Put a "~" before the instance name to make it unambiguous. At some point we can possibly just use a GET parameter, but I think there was some reason I didn't do that originally and this sequence of changes is disruptive enough already.
Test Plan: Saw local Aphlict unambiguously recognize "local.phacility.com" as instance "local", with a "~"-style URI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10697, T10783
Differential Revision: https://secure.phabricator.com/D15705
Summary:
Fixes T10697. This finishes bringing the rest of the config up to cluster power levels.
Phabricator is now given an arbitrarily long list of notification servers.
Each Aphlict server is given an arbitrarily long list of ports to run services on.
Users are free to make them meet in the middle by proxying whatever they want to whatever else they want.
This should also accommodate clustering fairly easily in the future.
Also rewrote the status UI and changed a million other things. 🐗
Test Plan:
{F1217864}
{F1217865}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10697
Differential Revision: https://secure.phabricator.com/D15703
Summary: Ref T10697. Mostly straightforward. Also allow the server to have multiple logs and log options in the future (e.g., different verbosities or separate admin/client logs or whatever). No specific plans for this, but the default log is pretty noisy today.
Test Plan: Set up a couple of logs, started server, saw it log to them.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10697
Differential Revision: https://secure.phabricator.com/D15702
Summary: Ref T10697. This isn't everything but starts generalizing options and moving us toward a cluster-ready state of affairs.
Test Plan: Started server in various configurations, hit most (all?) of the error cases with bad configs, sent test notifications.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10697
Differential Revision: https://secure.phabricator.com/D15701
Summary: Ref T10697. This just improves a couple of minor `bin/aphlict` things: make argument parsing more explicit/consistent, consolidate a little bit of duplicated code.
Test Plan: Ran all `bin/aphlict` commands.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10697
Differential Revision: https://secure.phabricator.com/D15698
Summary:
Ref T2783. This allows this worker to run on a machine different to the one that stores the repository, by routing the execution of Git over Conduit calls.
This API method is super gross, but fixing it isn't straightforward and it runs into other complicated considerations. We can fix it later; for now, just define it as "internal" to limit how much mess this creates.
"Internal" methods do not appear on the console.
Test Plan: Ran `bin/repository reparse --change <commit> --trace` on several commits, saw daemons make a Conduit call instead of running a `git` command.
Reviewers: hach-que, chad
Reviewed By: chad
Subscribers: joshuaspence, Korvin, epriestley
Maniphest Tasks: T2783
Differential Revision: https://secure.phabricator.com/D11874
Summary: Fixes T10797. This seems to fix things on my local system.
Test Plan:
- Cloned with a username, got prompted for a password.
- Cloned with a username + password.
- Cloned with a username + bad password (error).
Reviewers: chad
Reviewed By: chad
Subscribers: Grimeh
Maniphest Tasks: T10797
Differential Revision: https://secure.phabricator.com/D15706
Summary:
While reading the new cluster docs, I noticed a few minor typos, and one
section that seemed to be incomplete and redundant, so I just removed it.
Test Plan: none.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: chad, Korvin, jshirley
Differential Revision: https://secure.phabricator.com/D15704
Summary:
Ref T10784. Currently, if you terminate SSL at a load balancer (very common) and use HTTP beyond that, you have to fiddle with this setting in your premable or a `SiteConfig`.
On the balance I think this makes stuff much harder to configure without any real security benefit, so don't apply this option to intracluster requests.
Also document a lot of stuff.
Test Plan: Poked around locally but this is hard to test outside of a production cluster, I'll vet it more thoroughly on `secure`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10784
Differential Revision: https://secure.phabricator.com/D15696
Summary:
Ref T10784. On `secure`, logged-out users currently can't browse repositories when cluster/service mode is enabled because they aren't permitted to make intracluster requests.
We don't allow totally public external requests (they're hard to rate limit and users might write bots that polled `feed.query` or whatever which we'd have no way to easily disable) but it's fine to allow intracluster public requests.
Test Plan: Browsed a clustered repository while logged out locally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10784
Differential Revision: https://secure.phabricator.com/D15695
Summary: Fixes T10772, not sure why this fails, but reverting the code back to old dialog call works.
Test Plan:
- Try to add a new credential when importing a repository.
- Also created a new credential normally, via Passphrase.
- Also edited a credential.
Reviewers: chad
Reviewed By: chad
Subscribers: Korvin
Maniphest Tasks: T10772
Differential Revision: https://secure.phabricator.com/D15691
Summary:
Ref T10751. We currently have a placeholder Almanac document, and a fairly-bad-advice section in Daemons.
Pull these into the modern cluster documentation.
Test Plan: 17 phabricator PHDs
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10751
Differential Revision: https://secure.phabricator.com/D15689
Summary: Fixes T10789. If we aren't configured with a device, we never grabbed a lock in the first place, and should not expect one to be held.
Test Plan: Pushed non-cluster-configured Git SSH repository.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10789
Differential Revision: https://secure.phabricator.com/D15692
Summary: Changes elsewhere which support spaces before "|" when defining a table so that tables quote properly also accidentally changed these beautiful drawings into remarkup tables.
Test Plan: (( o.O ))
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15690
Summary:
Ref T4292. This mostly implements the locking/versioning logic for multi-master repositories. It is only active on Git SSH pathways, and doesn't actually do anything useful yet: it just does bookkeeping so far.
When we read (e.g., `git fetch`) the logic goes like this:
- Get the read lock (unique to device + repository).
- Read all the versions of the repository on every other device.
- If any node has a newer version:
- Fetch the newer version.
- Increment our version to be the same as the version we fetched.
- Release the read lock.
- Actually do the fetch.
This makes sure that any time you do a read, you always read the most recently acknowledged write. You may have to wait for an internal fetch to happen (this isn't actually implemented yet) but the operation will always work like you expect it to.
When we write (e.g., `git push`) the logic goes like this:
- Get the write lock (unique to the repository).
- Do all the read steps so we're up to date.
- Mark a write pending.
- Do the actual write.
- Bump our version and mark our write finished.
- Release the write lock.
This allows you to write to any replica. Again, you might have to wait for a fetch first, but everything will work like you expect.
There's one notable failure mode here: if the network connection between the repository node and the database fails during the write, the write lock might be released even though a write is ongoing.
The "isWriting" column protects against that, by staying locked if we lose our connection to the database. This will currently "freeze" the repository (prevent any new writes) until an administrator can sort things out, since it'd dangerous to continue doing writes (we may lose data).
(Since we won't actually acknowledge the write, I think, we could probably smooth this out a bit and make it self-healing //most// of the time: basically, have the broken node rewind itself by updating from another good node. But that's a little more complex.)
Test Plan:
- Pushed changes to a cluster-mode repository.
- Viewed web interface, saw "writing" flag and version changes.
- Pulled changes.
- Faked various failures, got sensible states.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15688
Summary:
Ref T4292. This adds some very basic cluster/device data to the new management view. Nothing interesting yet.
Also deal with disabled bindings a little more cleanly.
Test Plan: {F1214619}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15685
Summary:
Ref T4292. This puts a very rough skeleton in place for the new "Manage Repository" UI, somewhat similar to the "Settings" UI.
Right now, it has one panel with no content, and is not reachable from the UI.
Test Plan: {F1214525}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15683
Summary:
Ref T10756. When repositories are properly configured for the cluster (which is hard to set up today), be smart about which repositories are expected to exist on the current host, and only pull them.
This generally allows daemons to pretty much do the right thing no matter how many copies are running, although there may still be some lock contention issues that need to be sorted out.
Test Plan: {F1214483}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10756
Differential Revision: https://secure.phabricator.com/D15682
Summary: Ref T10702
Test Plan: Open a user profile, attempt to award an archived or previously awarded badge, badges dialog should provide a typeahead, and the suggestions should offer details about whether a badge is archived or already awarded.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T10702
Differential Revision: https://secure.phabricator.com/D15665
Summary:
Ref T4571. Write more of the missing documentation sections and clarify a few things.
Since the "replicating master" check needs a special permission, imposes a performance penalty, is probably very difficult to misconfigure, and likely not a big deal anyway, just drop the idea of trying to automatically detect + prevent it. We still show if it's an issue on the status page, provided we have permission to check.
When you don't have any cluster databases configured, never stop trying to connect to the default master database. We might want to do this eventually as load reduction, but just don't muddy the waters too much for now while things stabilize.
Test Plan:
- Tested functionality in cluster, non-cluster, and degraded-cluster modes.
- Used status console to monitor a health check cycle.
- Read docs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15679
Summary:
Ref T4571. When a database goes down briefly, we fall back to replicas.
However, this fallback is slow (not good for users) and keeps sending a lot of traffic to the master (might be bad if the root cause is load-related).
Keep track of recent connections and fully degrade into "severed" mode if we see a sequence of failures over a reasonable period of time. In this mode, we send much less traffic to the master (faster for users; less load for the database).
We do send a little bit of traffic still, and if the master recovers we'll recover back into normal mode seeing several connections in a row succeed.
This is similar to what most load balancers do when pulling web servers in and out of pools.
For now, the specific numbers are:
- We do at most one health check every 3 seconds.
- If 5 checks in a row fail or succeed, we sever or un-sever the database (so it takes about 15 seconds to switch modes).
- If the database is currently marked unhealthy, we reduce timeouts and retries when connecting to it.
Test Plan:
- Configured a bad `master`.
- Browsed around for a bit, initially saw "unrechable master" errors.
- After about 15 seconds, saw "major interruption" errors instead.
- Fixed the config for `master`.
- Browsed around for a while longer.
- After about 15 seconds, things recovered.
- Used "Cluster Databases" console to keep an eye on health checks: it now shows how many recent health checks were good:
{F1213397}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15677
Summary:
The way `DateTime` works with epochs is weird, I goofed this by having my server/viewer timezone the same and not noticing.
Also fix an issue where you do `?epoch=...` and then manually fiddle with the control: the control should win.
Test Plan:
- Set viewer and server timezone to different vlaues.
- Created a countdown using `?epoch=...`.
- Created a countdown using `?epoch=...` and fiddling with date controls.
- Created and edited a countdown using date/time control.
- Poked around Calendar to make sure I didn't ruin anything this time (browsed, created event, edited event).
Reviewers: lpriestley, chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15680
Summary:
Ref T4571. If we fail to connect to the master, automatically try to degrade into a temporary read-only mode ("UNREACHABLE") for the remainder of the request, if possible.
If the request was something like "load the homepage", that'll work fine. If it was something like "submit a comment", there's nothing we can do and we just have to fail.
Detecting this condition imposes a performance penalty: every request checks the connection and gives the database a long time to respond, since we don't want to drop writes unless we have to. So the degraded mode works, but it's really slow, and may perpetuate the problem if the root issue is load-related.
This lays the groundwork for improving this case by degrading futher into a "SEVERED" mode which will persist across requests. In the future, if several requests in a short period of time fail, we'll sever the database host and refuse to try to connect to it for a little while, connecting directly to replicas instead (basically, we're "health checking" the master, like a load balancer would health check a web application server). This will give us a better (much faster) degraded mode in a major service disruption, and reduce load on the master if the root cause is load-related, giving it a better chance of recovering on its own.
Test Plan:
- Disabled master in config by changing the host/username, got degraded automatically to UNREACAHBLE mode immediately.
- Faked full SEVERED mode, requests hit replicas and put me in the mode properly.
- Made stuff work, hit some good pages.
- Hit some non-cluster pages.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15674
Summary: Ref T4571. If `cluster.databases` is configured but only has replicas, implicitly drop to read-only mode and send writes to a replica.
Test Plan:
- Disabled the `master`, saw Phabricator automatically degrade into read-only mode against replicas.
- (Also tested: explicit read-only mode, non-cluster mode, properly configured cluster mode).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15672
Summary:
Ref T4571. Allows users to click the "read-only mode" notification to get more information about why an install is in read-only mode.
Installs can be in this mode for several reasons (explicit administrative action, no masters defined, no masters reachable), and it's useful to be able to tell the difference.
Test Plan: {F1212930}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15671
Summary: Fixes T6710. After D15669, we support a proper timeout parameter, so we don't need this hack anymore.
Test Plan: See D15669: forced a MySQL connector, set a low timeout, set a bad database, saw fast failures.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6710
Differential Revision: https://secure.phabricator.com/D15670
Summary:
Ref T4571. Ref T10759. Ref T10758. This isn't complete, but gets most of the job done:
- When `cluster.databases` is set up, most things ignore `mysql.host` now.
- You can `bin/storage upgrade` and stuff works.
- You can browse around in the web UI and stuff works.
There's still a lot of weird tricky stuff to navigate, and this has real no advantages over configuring a single server yet (no automatic failover, etc).
Test Plan:
- Configured `cluster.databases` to point at my `t1.micro` hosts in EC2 (master + replica).
- Ran `bin/storage upgrade`, got a new install setup on them properly.
- Survived setup warnings, browsed around.
- Switched back to local config, ran `bin/storage upgrade`, browsed around, went through setup checks.
- Intentionally broke config (bad hosts, no masters) and things seemed to react reasonably well.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571, T10758, T10759
Differential Revision: https://secure.phabricator.com/D15668
Summary: Ref T4571. The configuration option still doesn't do anything, but add a status panel for basic setup monitoring.
Test Plan:
Here's what a good version looks like:
{F1212291}
Also faked most of the errors it can detect and got helpful diagnostic messages like this:
{F1212292}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15667
Summary:
Ref T4571. This adds a new option which allows you to upgrade your one-host configuration to a multi-host configuration by configuring it.
Doing this currently does nothing. I wrote a lot of words about what it is //supposed// to do in the future, though.
Test Plan:
- Tried to configure the option in all the possible bad ways, got errors.
- Read documentation.
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15663
Summary:
Ref T4571. There will be a very long path beyond this, but add a basic read-only mode. You can explicitly enable this to put Phabricator in a sort of "maintenance" mode today if you're swapping databases or something.
In the long term, we'll automatically degrade into this mode if the master database is down.
Test Plan:
- Enabled read-only mode.
- Browsed around.
- Didn't immediately see anything that was totally 100% broken.
Most stuff is 80-90% broken right now. For example:
- Stuff like submitting comments doesn't work, and gives you a confusing, unhelpful error.
- None of the UI really knows that it's read-only. EditEngine stuff should all hide itself and say "you can't add new comments while an install is in read-only mode", for example, but currently does not.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15662
Summary: Recurring events will fatal a Calendar with this not set. `newDateTime` requires a date and time to be called property. I think this is correct fix? Fixes T10766
Test Plan: Build a recurring event, pull up /calendar/, see recurring events as expected. Previously, fatal.
Reviewers: lpriestley, epriestley
Reviewed By: epriestley
Subscribers: CodeMouse92, Korvin
Maniphest Tasks: T10766
Differential Revision: https://secure.phabricator.com/D15666
Summary: Testing out a new 'nav' layout in Settings / Config. Spent a few days here and couldn't find much better overall.
Test Plan: View each page in Settings and in Config. Save some config options. Test mobile, desktop, tablet.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15659
Summary:
I think this fixes the Mercurial + HTTP cluster issue. PHP adds `HTTP_` but we were not stripping it, so we would convert an `X-Whatever-Zebra` header into an `Http-X-Whatever-Zebra` header.
I don't think this behavior has changed? So maybe it just never worked? Git is more popular than Mercurial and SSH is easier to configure than HTTP, so it's plausible. I'll keep a careful eye on this when it deploys.
Test Plan:
- Set up local service-based Mercurial repository.
- Tried to clone, got similar error to cluster.
- Applied patch, clean clone.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15660
Summary: Fixes T5813, while I'm in here...
Test Plan: Sorted stuff by end date.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5813
Differential Revision: https://secure.phabricator.com/D15657
Summary: Fixes T10684. Fixes T10520. This primarily implements a date/epoch field, and then does a bunch of standard plumbing.
Test Plan:
- Created countdowns.
- Edited countdowns.
- Used HTTP prefilling.
- Created a countdown ending on "Christmas Morning", etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10520, T10684
Differential Revision: https://secure.phabricator.com/D15655
Summary: Closes T10690
Test Plan: Open Badges application, go to Advanced Search, search for a badge by its name and see result.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T10690
Differential Revision: https://secure.phabricator.com/D15656
Summary:
Fixes T8613. This was pretty straightforward, I just never dug into it originally.
`rawResultLimit = 0` just means "no limit", so the fix is to only apply a limit if it is set to some nonzero value.
Also modernize a few pieces of code.
Test Plan: I'm actually not sure this can actually be hit normally? I faked `setGenerateGhosts(true)` into an unrelated query, hit the fatal, then fixed it.
Reviewers: lpriestley, chad
Reviewed By: chad
Maniphest Tasks: T8613
Differential Revision: https://secure.phabricator.com/D15653
Summary: Found another bouncing around.
Test Plan: Review in diff
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15651
Summary: Ref T10262. Instead of dumping an unhelpful 403 "ACCESS DENIED" page on users, explain the most likely cause of the issue and give them a link to return to the file detail page to learn more or get an up-to-date link.
Test Plan: Hit both errors, had a lovely experience with the helpful dialog text.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10262
Differential Revision: https://secure.phabricator.com/D15650
Summary: Ref T6027. We got a not-very-user-friendly default string before.
Test Plan: Selected "Move", didn't change the dropdown, hit submit. Now, got a nice human-readable description of the issue.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6027
Differential Revision: https://secure.phabricator.com/D15649
Summary: Bumps to 14px, fixes some on Differential
Test Plan: view various headers in Differential
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15647
Summary:
Ref T10262. Currently, we always render a tag like this when you `{F123}` an image in remarkup:
```
<img src="/xform/preview/abcdef/" />
```
This either generates the preview or redirects to an existing preview. This is a good behavior in general, because the preview may take a while to generate and we don't want to wait for it to generate on the server side.
However, this flickers a lot in Safari. We might be able to cache this, but we really shouldn't, since the preview URI isn't a legitimately stable/permanent one.
Instead, do a (cheap) server-side check to see if the preview already exists. If it does, return a direct URI. This gives us a stable thumbnail in Safari.
Test Plan:
- Dragged a dog picture into comment box.
- Typed text.
- Thing didn't flicker like crazy all the time in Safari.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10262
Differential Revision: https://secure.phabricator.com/D15646
Summary: Going to render these all normal case instead of all caps, and bump up the font size. Should be more consistent. Yellow if you green anything orange.
Test Plan: grep, lint
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15645
Summary:
Ref T10262. This removes one-time tokens and makes file data responses always-cacheable (for 30 days).
The URI will stop working once any attached object changes its view policy, or the file view policy itself changes.
Files with `canCDN` (totally public data like profile images, CSS, JS, etc) use "cache-control: public" so they can be CDN'd.
Files without `canCDN` use "cache-control: private" so they won't be cached by the CDN. They could still be cached by a misbehaving local cache, but if you don't want your users seeing one anothers' secret files you should configure your local network properly.
Our "Cache-Control" headers were also from 1999 or something, update them to be more modern/sane. I can't find any evidence that any browser has done the wrong thing with this simpler ruleset in the last ~10 years.
Test Plan:
- Configured alternate file domain.
- Viewed site: stuff worked.
- Accessed a file on primary domain, got redirected to alternate domain.
- Verified proper cache headers for `canCDN` (public) and non-`canCDN` (private) files.
- Uploaded a file to a task, edited task policy, verified it scrambled the old URI.
- Reloaded task, new URI generated transparently.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10262
Differential Revision: https://secure.phabricator.com/D15642
Summary:
Ref T10262. Files have an internal secret key which is partially used to control access to them, and determines part of the URL you need to access them. Scramble (regenerate) the secret when:
- the view policy for the file itself changes (and the new policy is not "public" or "all users"); or
- the view policy or space for an object the file is attached to changes (and the file policy is not "public" or "all users").
This basically means that when you change the visibility of a task, any old URLs for attached files stop working and new ones are implicitly generated.
Test Plan:
- Attached a file to a task, used `SELECT * FROM file WHERE id = ...` to inspect the secret.
- Set view policy to public, same secret.
- Set view policy to me, new secret.
- Changed task view policy, new secret.
- Changed task space, new secret.
- Changed task title, same old secret.
- Added and ran unit tests which cover this behavior.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10262
Differential Revision: https://secure.phabricator.com/D15641
Summary:
This reverts commit 3f50ba90f1.
Fixes T10412. Everyone seems to hate this and I don't feel strongly about it. It's definitely a little weird.
Test Plan: Straight revert.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10412
Differential Revision: https://secure.phabricator.com/D15644
Summary: Fixes T10737. I agree that this is a better behavior than always making them blue (boring).
Test Plan:
what
{F1208333}
wut
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T10737
Differential Revision: https://secure.phabricator.com/D15643
Summary:
Ref T6027. Fixes T10734.
- If one of the projects a task is tagged with isn't visible to the user or doesn't have a board, it won't have columns.
- Don't show options for projects with disabled boards.
Test Plan:
- Viewed task with project with no columns; no fatal.
- Viewed task with project with disabled board; no options to move on that board.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10734, T6027
Differential Revision: https://secure.phabricator.com/D15640
Summary:
Ref T6027. Normally, actions use the same order as the form, but in some cases (like moving stuff on workboards) it makes sense to reorder them explicitly.
Pin "Move on board" near the bottom, and "projects/subscribers" at the bottom. I think these are generally reasonable rules in all cases.
Test Plan: Opened menu, saw slightly better action order.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6027
Differential Revision: https://secure.phabricator.com/D15639
Summary:
Ref T6027. Try this out and see how it feels? Clear issues:
- This definitely shouldn't be at the top.
- You should probably be able to select it multiple times?
- Some of the "which columns show up" rules might need adjustment?
- Diamond marker maybe not great?
Not sure I love this but it doesn't feel //terrible//...
Test Plan: {F1207891}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6027
Differential Revision: https://secure.phabricator.com/D15638
Summary: Ref T5214. Fixes T10486. Ref T6027. This exposes the `TYPE_COLUMNS` transaction in a usable way via API, and fixes the interactions via prefilling.
Test Plan:
- Created tasks directly into columns via API.
- Moved tasks between columns via API.
- Used `?column=...` to try to create a template task with valid and bogus column PHIDs.
Reviewers: chad
Reviewed By: chad
Subscribers: AmyLewis
Maniphest Tasks: T5214, T6027, T10486
Differential Revision: https://secure.phabricator.com/D15636
Summary: Ref T6027. This adds human-readable rendering for the new `TYPE_COLUMNS` core transactions.
Test Plan: {F1207784}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6027
Differential Revision: https://secure.phabricator.com/D15635
Summary:
Ref T6027. We currently have two different transaction types:
- `TYPE_PROJECT_COLUMNS` does most of the work, but has a sort of weird structure and isn't really suitable for API use.
- `TYPE_COLUMN` is this weird, junk transaction which mostly just creates the other transaction.
Merge them into a single higher-level `TYPE_COLUMNS` transaction which works properly and has a sensible structure and comprehensive error checking.
Remaining work here:
- I've removed the old rendering logic, but not yet added new logic. I need to migrate the old transaction types and add new rendering logic.
- Although the internal representation is now //suitable// for use in the API, it isn't properly exposed yet.
Test Plan:
- Created tasks into a column.
- Ran unit tests.
- Moved tasks between columns.
- Will perform additional testing in followups.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6027
Differential Revision: https://secure.phabricator.com/D15634
Summary: Ref T10671
Test Plan: Open Conduit application, open `badges.edit` or `badges.search`, create, edit, or query for a badge.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T10671
Differential Revision: https://secure.phabricator.com/D15622
Summary: Modernize Files a bit, use newPage
Test Plan: New file, drag and drop file, view file, edit file
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15631
Summary: Ref T7673. This is really just so I can force admin.phacility.com logout when you log out of an instance, but there are a few other things we could move here eventually, like the WILLREGISTERUSER event.
Test Plan: Logged out of an instance, got logged out of parent (see next change).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7673
Differential Revision: https://secure.phabricator.com/D15629
Summary:
Ref T7303. Currently, our handling of "scope" is fairly rigid and adheres to the spec, but some of these behaviors don't make much sense in practice.
Soften some behaviors and make them more flexible:
**Soft Failure on Unknown Permissions**: If a client asks for a permission we don't know about, just warn that we don't recognize it instead of fataling. In particular, I plan to make `offline_access` and `whoami` implicit. Older clients that request these permissions will still work fine as long as we don't hard-fatal.
**Move `user.whoami` to ALWAYS scope**: Make `whoami` a default permission. We've already done this, in effect; this just formalizes it.
**Tokens no longer expire**: Make `offline_access` (infinite-duration tokens) a default permission. I think the OAuth model doesn't map well to reality. It is common for other providers to issue "temporary" tokens with a duration of multiple years, and the refesh workflow is sort of silly. We can add a "temporary" scope later if we need temporary tokens.
This flow was potentially extra silly with the "log out of Phacility" use case, where we might need to have you log in again before we could log you out, which is bizarre and senseless. Avoid this nonsense.
**Move away from granular permissions**: Users currently get to pick-and-choose which permissions they grant, but this likely rarely/never works in practice and is fairly hostile since applications can't communicate which permissions they need. Applications which can actually operate with only some subset of permissions can make separate requests (e.g., when you activate "cool feature X", it asks for X permission). I think applications that do this are rare; pretty much everything just asks for tons of permissions and everyone grants them.
Making this all-or-nothing is better for well-behaved applications and better for users. It's also slightly better for overzealous applications that ask for more than they need, but whatever. Users can make an informed decision, hopefully, and I plan to let administrators force applications to a subset of permissions once we introduce meaningful scopes.
Test Plan:
- Generated tokens.
- Used tokens.
- Authorized an instance.
- Faked some bogus scopes, got clean authorization.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303
Differential Revision: https://secure.phabricator.com/D15621
Summary: Converts over to `newPage`
Test Plan: Pull up Settings panel, test a few.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15625
Summary: Ref T7303. This interaction is very oldschool; modernize it to enable/disable instead of "nuke from orbit".
Test Plan:
- Enabled applications.
- Disabled applications.
- Viewed applications in list view.
- Generated new tokens.
- Tried to use a token from a disabled application (got rebuffed).
- Tried to use a token from an enabled application (worked fine).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303
Differential Revision: https://secure.phabricator.com/D15620
Summary: Runs through Releeph to move to new UI and `newPage`
Test Plan: Ran through product, release, branch, everything seems to work.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15623
Summary: Ref T10570. Earlier work on that task made tables activate even if indented so they work in quoted blocks. However, the documentation doesn't explicitly mark them in code blocks, so it turned them into markup.
Test Plan:
Used `bin/diviner generate` to regenerate documentation, verified it now renders properly.
{F1205818}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10570
Differential Revision: https://secure.phabricator.com/D15619
Summary: Swaps over to new hotness
Test Plan: Pull up mail view, see new UI
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15616
Summary: Swaps over to `newPage` and `newDialog`
Test Plan: Unsure how to actually pull these up?
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15617
Summary: Updates to use new UI
Test Plan: Save a custom query, edit a custom query
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15618
Summary: Updates Console and Operations page.
Test Plan: Pull up Console, pull up status page
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15615
Summary: Moves these Maniphest pages over to modern UI, components
Test Plan: Batch Edit Tasks, View some reports.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15614
Summary: Ref T7303. This application is currently stone-age tech (no transactions, hard "delete" action). Bring it up to modern specs.
Test Plan:
- Created and edited an OAuth application.
- Viewed transaction record.
- Tried to create something with no name, invalid redirect URI, etc. Was gently rebuffed with detailed explanatory errors.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303
Differential Revision: https://secure.phabricator.com/D15609
Summary: View various conduit pages and update to new UI and add calls to newPage
Test Plan: View list, view method, make a call.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15613
Summary: Uses modern UI, `newPage`, etc. Changes table behavior to always scroll if too large for container, can't find anything this breaks, but be on the lookout.
Test Plan: Pull up help and view pages, search for some people and projects.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15611
Summary: Single callsite, swap to `newPage`
Test Plan: Visit page, see same status message. Also remove device ready flag.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15610
Summary:
Fixes T10721. When trying to load commits by identifier, we would take some bad pathways in Subversion if the repository had no callsign and end up missing the commits.
Fix this logic so it works for either callsigns (e.g., if passed `rXyyy`) or with PHIDs if passed repositories.
Test Plan:
- Viewed SVN commit in a Subversion repository with no callsign.
- Added a callsign, looked at it again.
- Viewed non-SVN commits in callsign and non-callsign repositories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10721
Differential Revision: https://secure.phabricator.com/D15607
Summary: Ref T7303. Small modernization.
Test Plan:
- Searched by various users.
- Viewed all, reordered, etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303
Differential Revision: https://secure.phabricator.com/D15606
Summary:
Ref T7303. Ref T7673. This implements an "auth.logout" which:
- terminates all web sessions;
- terminates the current OAuth token if called via OAuth; and
- may always be called via OAuth.
(Since it consumes an OAuth token, even a "malicious" OAuth application can't really be that much of a jerk with this: it can't continuously log you out, since calling the method once kills the token. The application would need to ask your permission again to get a fresh token.)
The primary goal here is to let Phacility instances call this against the Phacility upstream, so that when you log out of an instance it also logs you out of your Phacility account (possibly with a checkbox or something).
This also smooths over the session token code. Before this change, your sessions would get logged out but when you reloaded we'd tell you your session was invalid.
Instead, try to clear the invalid session before telling the user there's an issue. I think that ssentially 100% of invalid sessions are a result of something in this vein (e.g., forced logout via Settings) nowadays, since the session code is generally stable and sane and has been for a long time.
Test Plan:
- Called `auth.logout` via console, got a reasonable logout experience.
- Called `auth.logout` via OAuth.
- Tried to make another call, verified OAuth token had been invalidated.
- Verified web session had been invalidated.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303, T7673
Differential Revision: https://secure.phabricator.com/D15594
Summary:
Ref T7303. OAuth scope handling never got fully modernized and is a bit of a mess.
Also introduce implicit "ALWAYS" and "NEVER" scopes.
Always give tokens access to meta-methods like `conduit.getcapabilities` and `conduit.query`. These do not expose user information.
Test Plan:
- Used a token to call `user.whoami`.
- Used a token to call `conduit.query`.
- Used a token to try to call `user.query`, got rebuffed.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303
Differential Revision: https://secure.phabricator.com/D15593
Summary:
Ref T7303. This inches toward properly-behaved cluster logout.
- Use IDs instead of PHIDs in URIs.
- Slightly more modern code.
- Fix some crumb stuff.
Test Plan: Created, edited, viewed, deleted, showed secret for, authorized, test-auth'd an application.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303
Differential Revision: https://secure.phabricator.com/D15592
Summary: Updates various /people/ pages for new UI and newPage
Test Plan: Review creating people, new people, sending invites, editing a profile, setting a new picture, something with LDAP
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15604
Summary: Cleans up Feed Story individual page
Test Plan: View an individual story by clicking on date.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15599
Summary: No UI updates, just swapping over to `newPage`
Test Plan: Pull up each page.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, yelirekim
Differential Revision: https://secure.phabricator.com/D15601
