Summary:
See PHI180. Currently, if you begin creating or editing an inline and then swap display modes (for example, with "View Unified"), your edit is lost.
Persisting the editor state is complicated and this is very rare, so just prevent the action and warn the user instead.
Also make the warning persist for a little longer since a few of the messages, including this one, take a couple seconds to read now.
Test Plan:
- Edited a comment, tried to swap display modes, got a warning.
- Swapped display modes normally with no comment being edited.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18774
Summary:
See PHI185. When looking at a revision, you can Command-Click (Mac) symbols to jump to their definitions (provided the symbol index has been built).
Currently, the code works on any node inside the changeset list, so it activates when clicking links inside inline comments and opening them in a new window.
To avoid this, don't activate if we're inside an inline comment. This technically prevents you from doing a symbol lookup on a symbol inside a codeblock inside an inline, but that seems fine/reasonable.
Test Plan: Wrote `Dxxx` in an inline, command-clicked it. Before: got a symbol lookup. After: just a new tab with the revision.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18753
Summary: Noticed a couple of typos in the docs, and then things got out of hand.
Test Plan:
- Stared at the words until my eyes watered and the letters began to swim on the screen.
- Consulted a dictionary.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18693
Summary:
Fixes T12979. In D18457, we added a "No Notifications" setting to let users disable the blue and yellow pop-up notifications that alert you when an object has been updated, since some users found them distracting.
However, the change made "do nothing" the default, so all other `JX.Notification` callsites -- which never pass a preference -- were effectively turned off no matter what your setting was set to. This includes the "Read-Only" mode warning (grey), the "High Security" mode warning (purple), the "timezone" warning, and a few others.
Tweak things a little bit so the setting applies to ONLY blue and yellow ("object you're following was updated" / "this object was updated") notifications, not other types of popup notifications.
Test Plan:
- With notifications on in settings, got blue notifications and "Read-only".
- With notifications off in settings, got "Read-only" but no blue notifications.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12979
Differential Revision: https://secure.phabricator.com/D18600
Summary:
Ref T12970. See PHI43. Currently, the "Show Older Comments" link gets auto-clicked if the user visits **any** anchor. This is not correct.
Instead, only auto-click it if the user visits a numeric anchor. This fixes the behavior approximately 98% of the time. See T12970 for a followup on the remaining ambiguous cases.
Test Plan:
- Viewed a revision with some folded transactions and a "Show Older Comments" link.
- Clicked a link to a file in the table of contents, with a hash like `#1234abcd`.
- Before: Timeline expanded and I ended up somewhere bad.
- After: Timeline no longer expanded.
- Manually changed hash to `#1234` (purely numeric), saw timeline expand.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12970
Differential Revision: https://secure.phabricator.com/D18458
Summary: Fixes T12792. Expands the Notifications to "web, desktop, both, or none" for real-time notifications in settings.
Test Plan: Test with "test notifications" button, and while logged into two accounts with each of the 4 settings.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Maniphest Tasks: T12792
Differential Revision: https://secure.phabricator.com/D18457
Summary: Ref T12733. In this case, the server returns no new `row`, but we would incorrectly try to bind to one.
Test Plan:
- Created a new comment.
- Edited it.
- Deleted all the text.
- Saved changes.
- Before: Header continues to show phantom "1 Unsubmitted Comment", browser error log reflects one error.
- After: Header reflects comment being deleted, error log is quiet.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18262
Summary:
Fixes T8909. Ref T12733.
UI attempts to follow the mock, but is a bit rough since PHUIXButtonView without text in this menu gets weird spacing, we don't have circular buttons yet, and PHUIXActionView without an icon also gets odd spacing.
Test Plan: {F5003125}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733, T8909
Differential Revision: https://secure.phabricator.com/D18128
Summary:
Ref T12733. When a revision has unsubmitted checkmarks:
- Color the banner yellow.
- Show them in the "X unsubmitted" count.
- Make the "X unsubmitted" button cycle between all drafts (written but unpublished comments) and "draft done" (checked but unsubmitted "Done" checkbox comments).
Test Plan:
- Checked a "Done" box, saw "1 unsubmitted" and yellow banner.
- Clicked "5 unsubmitted" repeatedly, saw it cycle through all unsubmitted comments and checkboxes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18127
Summary:
Ref T12733. This paves the way for a separate "hide" operation which completely hides things.
(I didn't extend this to the server side because that would require schema changes and the new "hide" state is client-only.)
Test Plan: Collapsed and expanded inlines, viewed tooltips.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18126
Summary:
Fixes T12806. Ref T12733.
- Don't count synthetic (lint) comments as anything.
- When you begin writing an inline then cancel it, don't count it as anything.
- When we would show "0 / X", just show "X".
Test Plan:
- Viewed a diff with synthetic comments, no button.
- Wrote, then cancelled an inline. No "X comments".
- Clicked / unlicked "Done", saw "X" -> "1 / X".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12806, T12733
Differential Revision: https://secure.phabricator.com/D18103
Summary: Updates to use the standard 13px size we use everywhere else, cleans up a few mobile/display bugs, adds a hover state for `tr`.
Test Plan:
Review Diffusion, Daemons, Almanac, People Logs, anything else?
{F4991070}
{F4991071}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18088
Summary: Ref M1476. Same as D18070 but that did most of the magic.
Test Plan: {F4987961}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18071
Summary: Ref T12779. Try a little harder to get the autoscroll heuristic right, but also just stick to anchors if the URL has an anchor and the scroll position is near that anchor.
Test Plan:
- Loaded an anchored diff at a bunch of window sizes, seemed pretty sticky.
- Added `usleep(100000 * mt_rand(1, 15))` to `ChangesetViewController` to make changesets load slowly and in random order, reloaded a bunch of times while scrolling around, things appeared reasonable.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12779
Differential Revision: https://secure.phabricator.com/D18060
Summary: Ref M1476. I'm going to see if I can set up side-by-side "PHUI" vs "PHUIX" to make maintaining them a touch easier. Before doing that, nuke some really old UI examples that don't seem very useful.
Test Plan: Viewed UIExamples, saw fewer bad ones.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18049
Summary: Ref T12733. This adds classes for unsubmitted/unsaved changes, and lays some groundwork for additional buttons.
Test Plan:
- Added, edited, deleted comments.
- Saw bar background color update appropriately.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18045
Summary: Ref T12733. This ultimately conflicts with scrolling and took about two days to get reported as a bug/regression. See T12733 for a bunch of additional discussion. See T1026 for original discussion.
Test Plan:
- Left single-line and multi-line comments on desktop.
- Tapped to leave single-line comments on mobile.
- Dragged lines on mobile, got a scroll instead of a range comment.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18044
Summary: Ref T12733. Completely removes the objectives UI.
Test Plan:
- Grepped for `objective`, etc.
- Browsed revisions, no JS errors / broken stuff.
- (If I missed anything, it's likely to turn up in followup changes.)
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18043
Summary:
Fixes T12779. Currently, we scroll down if the midline of the changeset is above the midline of the viewport.
This rule can cause us to scroll improperly when loading changesets //after// jumping to their anchors, since the changeset we want to look at will likely have a midpoint above the document midline. That is, we follow an anchor to `X.c`, then it loads, then we scroll past it.
Instead, scroll only if the changeset is (almost) entirely above the viewport.
Test Plan:
Followed an anchor to `PHUIFeedStoryExample`:
{F4984154}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12779
Differential Revision: https://secure.phabricator.com/D18052
Summary: Grep for phui-tag-shade and verify we're no longer calling shade-color directly.
Test Plan: Search, workboard, story points, etc.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17993
Summary: Ref T12733. When an inline is selected, make it stand out so you can see where you are in the document more clearly.
Test Plan: {F4968509}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17982
Summary: Ref T12733. Show a "reply" icon for replies, and make them stack directly under their parent.
Test Plan: {F4968500}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17981
Summary: Ref T12733. Shows a comment snippet when hovering inlines in the objective list.
Test Plan: {F4968490}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17980
Summary: Ref T12733. Currently, creating a new inline and then canceling it leaves a marker in the objective list. Instead, remove the marker.
Test Plan:
- Created an empty inline, cancelled. Created a non-empty inline, cancelled. No objective marker in either case.
- Created a new normal inline, objective marker.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17979
Summary:
Ref T12733. When creating a new comment, the objective could appear to far up in the scrollbar because we were anchoring it to an invisible row.
Instead, anchor to the "edit" row while editing.
Test Plan: Created a new comment at the very top of a file, saw "File, Star" icons instead of "Star, File".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17978
Summary:
Ref T12733.
- While editing a comment, show a pink star ({icon star, color=pink}) with a tooltip.
- Slight UI tweaks, including draft comments getting an indigo pencil ({icon pencil, color=indigo}).
Test Plan: {F4968470}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17977
Summary: Ref T12733. Currently, long filenames get cut off at 160px. Instead, don't cut them off.
Test Plan:
Before:
{F4968401}
After:
{F4968402}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17975
Summary:
Ref T12733. In the longer run I'd like to just push this out from the edge, but that currently gets us into trouble since we start bumping into content. On my system, the trackpad scrollbar also expands in size when moused over, so the minimum number of pixels we need to push it out is approximatley 15px. This hits body content and the persistent chat.
For now, just disable this element on trackpad systems.
Test Plan:
Disconnected all USB peripherals, quit and relaunched Safari, saw no objective list.
Reconnected mouse, relaunched Safari, saw objective list.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17974
Summary: See D17955.
Test Plan: Loaded a revision, no longer saw annotations with prototypes off. Still saw annotations with prototypes on.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17983
Summary:
Ref T12733. Currently, we detect the changeset which is in the middle of the screen as the current changeset.
This doesn't always get us the most intuitive changeset, particularly after a navigation from the scroll objective list: when you jump to changeset "X", you'd tend to expect "X" to be shown in the header, but the //next// changeset may be shown if "X" is too short.
Instead, select the changeset near the top of the screen (spanning an invisible line slightly below the banner).
Test Plan: Scrolled and jumped through a document with long and short changesets, saw a more intuitive changeset selected by the banner.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17976
Summary:
Minor UI tweaks:
- Use the dynamic icon for each file (e.g., image, text), not a hard-coded icon.
- Render the path (less important) in grey and the filename (more important) in black.
Test Plan: {F4966176}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17957
Summary:
Add important objectives (like waygates and quest markers) to the minimap.
This also probably fixes @cspeckmim's bug with the {key @} keyboard shortcut.
Test Plan:
(This is probably easier to undestand if you `arc patch` + click around.)
{F4966037}
Reviewers: chad, amckinley
Reviewed By: chad
Subscribers: cspeckmim
Differential Revision: https://secure.phabricator.com/D17955
Summary:
Fixes T1591. This was removed long ago because it was a mess to implement and caused a bunch of weird issues, and also my tolerance for dealing with weird JS issues was much, much lower.
I have now survived the fires of JX.Scrollbar and would love to address 200 small nitpicks about obscure browser behaviors on Linux, so open the floodgates again.
A secondary goal here is to create room to add a global view state menu on the right, with 300 options like "hide all inlines", "hide done inlines", "hide collapsed inlines", "hide ghosts", "show ghosts", "enable filetree", "disable filetree", etc, etc. Not sure how much of this I'll actually do. I have one more experiment I want to try first.
Test Plan: {F4963294}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T1591
Differential Revision: https://secure.phabricator.com/D17945
Summary:
Ref T12616. This puts "h" back to collapse or expand the current file.
This removes some very complicated/messy code around following links in the table of contents and getting files auto-expanded. I suspect no one will miss this, but we can restore it if ayone notices.
Test Plan: Pressed "h" to collapse/expand a file. Also used the menu items.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17940
Summary:
Fixes T10563. If you have a thread like this:
```
> A
> B
> C
```
...and you reply to "B", we should put the new inline below "B".
We currently do when you reload the page, but the initial edit goes at the bottom always (below "C").
Test Plan: {F4963015}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10563
Differential Revision: https://secure.phabricator.com/D17938
Summary:
Ref T12616. When you "Delete" a comment from the preview, we try to delete the comment on screen too.
It may or may not be present on screen: if you just added it it's usually visible. However, you might also have hidden the file it contains or it could be on an older diff in a file which is no longer present in the current diff.
After updates in T12616, we could only find the comment if you'd previously interacted with it for some reason. Update this code to be able to find all inlines present in the document.
Test Plan:
- Write a draft comment.
- Reload the page.
- DO NOT INTERACT WITH THE COMMENT!
- Delete it from the preview.
- After patch: Comment is deleted from the document, too.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17937
Summary:
Fixes T11662. In the very obscure situation described in that task, quiet a JS console warning.
The actual edit operation appears to work correctly after changes elsewhere.
There aren't really any legitimate lines for us to highlight in this case so I'm just giving up rather than trying to do something approximate.
Test Plan:
- Wrote `long.txt`.
- Created revision.
- Added an inline near the bottom.
- Removed most of `long.txt`.
- Updated revsion.
- Replied to the ghost inline.
- Edited the reply to the ghost inline, worked.
- Hovered the reply to the ghost inline: no line highlight, but no errors.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11662
Differential Revision: https://secure.phabricator.com/D17930
Summary: Fixes T1026. Ref T12616. Allows drag-to-select on devices to add inlines on a range of lines, using dark magic that I copy/pasted from StackOverflow.
Test Plan: Left a comment on a range of lines on iPhone simulator.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616, T1026
Differential Revision: https://secure.phabricator.com/D17928
Summary: Ref T12616. This makes line range selection use the new code, and removes the remainder of the old "hover a line number" / "select a line range" code.
Test Plan: Hovered line numbers; selected line ranges.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17927
Summary:
Ref T11401. Fixes T5232. Ref T12616.
Partly, this moves more code over to the new stuff.
This also allows "r" to work if you have code selected (not just comments). If you "reply" to code, you start a new comment.
You can "R" a comment to quote it. This just starts a new comment normally if you "R" a block of code. This is sort of a power-user version of "quote" since it seems like it probably doesn't really make sense to put it in the UI ever (maybe).
With the new click-to-select, you can click + "R" to reply-with-quote.
Test Plan: Used "r" and "R" to reply to comments and code.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616, T11401, T5232
Differential Revision: https://secure.phabricator.com/D17920
Summary:
Fixes T8047. Ref T12616. Fixes T9270. This moves the "hover" part of the hover/drag behavior to the new code, leaving the "drag" part for a followup change.
The new hover UI behaves properly with Quicksand (T8047) and the filetree (T9270).
Test Plan: Hovered over inlines, saw lines select properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616, T9270, T8047
Differential Revision: https://secure.phabricator.com/D17919
Summary: Ref T12616. The ability to do {nav Edit > Cancel > Undo} to get your text back on inlines got dropped during the conversion. Restore it.
Test Plan:
Created, replied, and edited inlines, typed text, then cancelled. Was able to undo.
Also undid normal deletion.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17916
Summary:
Fixes T11784. A lot of things are interacting here, but this probably gets slightly better results slightly more often?
Basically:
- When we load content, we try to keep the viewport "stable" on the page, so the page doesn't jump around like crazy.
- If you're near the top or bottom of the page, we try to stick to the top (e.g., reading the summary) or bottom (e.g., writing a comment).
- But, if you followed an anchor to a comment that's close to the bottom of the page, we might stick to the bottom intead of staying with the anchor.
Kind of do a better job by not sticking to the bottom if you have an anchor. This will get things wrong if you follow an anchor, scroll down, start writing a comment, etc. But this whole thing is a pile of guesses anyway.
Test Plan:
- Followed an anchor, saw non-sticky stabilization.
- Loaded the page normally, scrolled to the bottom real fast, saw sticky stabilization.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11784
Differential Revision: https://secure.phabricator.com/D17911
Summary:
Ref T12616. Fixes T12715. I suspect these are very rarely used. (I think you tried to get rid of them before but I pushed back since we couldn't really offer great alternatives at the time?)
Now that the code is in a better place:
- Click an inline's header (just the colored part) to select it with the keyboard selection cursor.
- Click again to deselect it.
- You can use "n" and "p" to jump to comments, so "click + n" is the same as the old "V" action.
- This also makes it easier to swap between keyboard and mouse workflows, since you can jump into things with the keyboard at any inline.
Also, make "Reply" render more consistently.
Test Plan:
- Did all that stuff, things seemed to work OK.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12715, T12616
Differential Revision: https://secure.phabricator.com/D17908
Summary:
Fixes T8130. Allows selected comments to be shown/hidden (with "q") or marked done/not-done (with "w").
(These key selections are because "qwer" are right next to each other on QWERTY keyboards, and now mean "hide, done, edit, reply".)
Also, allow "N" and "P" to do next/previous inline, including hidden inlines. This makes "q" to hide/show a little more powerful and a little easier to undo.
Test Plan: Used "q", "w", "N" and "P" to navigate and interact with comments.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8130
Differential Revision: https://secure.phabricator.com/D17906
Summary:
Ref T12634. Fixes T8131. Currently, most edit operations (edit, reply, collapse, mark done) lose the keyboard cursor state.
Instead, bind the state more tighlty to the inline object itself (instead of the rows which happen to be in the document), and then do a bit of recalculation to try to keep it selected across edits.
Test Plan:
- Used "n" to select an inline.
- Clicked "Done" checkbox.
- Pressed "n".
- Went to the next inline (previously: lost position in document).
- Behavior is also better for: edit, reply, collapse/expand.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12634, T8131
Differential Revision: https://secure.phabricator.com/D17905
Summary:
Ref T12634. Fixes T12633. These events allow the keyboard reticle to resize properly.
(I expect to possibly hide/disable the reticle in the future during edits, but at least make the behavior sensible for now.)
Test Plan:
- Used "n" to select a block.
- Clicked a line number in that block to start a new inline comment.
- Saw reticle resize properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12634, T12633
Differential Revision: https://secure.phabricator.com/D17904
Summary: Ref T12634. Fixes T10049. Toggling an inline currently leaves the reticle oddly-positioned.
Test Plan:
- Selected a comment with the keyboard.
- Collapsed it.
- Saw reticle behave reasonably.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12634, T10049
Differential Revision: https://secure.phabricator.com/D17903
Summary: Fixes T12632. Ref T12634. Currently, the keyboard focus reticle does not redraw properly after a window resize.
Test Plan:
- Used "n" to select a block.
- Resized the window.
- Saw the reticle also resize properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12634, T12632
Differential Revision: https://secure.phabricator.com/D17901
Summary: Ref T8047. Ref T12634. When we sleep, hide the reticle. Restore it when we wake.
Test Plan:
- With Quicksand enabled..
- Used "j" to select a change in a revision.
- Navigated away by clicking a link.
- WOW! Reticle vanished properly!
- Used "back" to return.
- Reticle returned properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12634, T8047
Differential Revision: https://secure.phabricator.com/D17900
Summary:
Ref T12634. Using keyboard shortcuts in Differential currently relies on focus behavior in `KeyboardShortcutManager`.
This possibly made sense long ago, but no longer does, and leads to a whole slew of bugs where the reticle doesn't interact properly with anything else.
Move it to Differential so it can be made reasonably aware of edit operations, Quicksand navigation, etc.
This just moves the code; future diffs will actually fix bugs.
Test Plan: Used "n", "j", etc., saw the same behavior as before.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12634
Differential Revision: https://secure.phabricator.com/D17899
Summary: Ref T12616. This makes "edit" and "reply" work again.
Test Plan:
Used "e" and "r" to edit and reply.
Also used them in bogus ways and got useful UI feedback.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17895
Summary: Ref T12616. This moves most keyboard shortcuts into DiffChangesetList. It breaks some shortcuts that I plan to restore later, noted in T12616 (toggle file, edit inline, reply to inline), since I think ripping them out now and rebuilding them in a little bit will make things much simpler.
Test Plan:
- Used j, k, n, p, J, K shortcuts to navigate a revision.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17859
Summary:
Ref T12616. This moves "reply" to the new stuff and deletes DifferentialInlineEditor, which no longer does anything.
(This breaks some keyboard shortcuts, but I'll rebase D17859 shortly.)
Test Plan: Replied to inlines; things seemed to work properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17894
Summary:
Ref T12616. This makes creating inlines use the new code.
Creation and editing is now slightly more consistent in how it uses nodes. This will simplify the next change (replies), which I ran into some trouble with in an earlier iteration.
Note that this (and other changes in the series) allow you to create and edit multiple inlines simultaneously. This is mostly a feature, although I expect we'll need to lock it down a little bit. I have some UI ideas to help avoid errors.
Test Plan: Created inlines on a single line; on a range of lines; on the same line; multiple inlines at the same time.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17893
Summary:
Ref T12616. This moves the delete actions to the new, more stateful way of doing things.
These are a little tricky because you can click "Delete" on an inline, but you can also click "Delete" from the preview area at the bottom of the page. If you do, the inline you are deleting may or may not be present on the page.
This has a few bugs -- notably, deleting from the preview without interacting with the on-page inline first won't actually delete the on-page inline yet -- but nothing too serious.
Test Plan: Deleted inlines, undid deletion, deleted from preview.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17890
Summary:
Ref T12616. This updates clicking the "Done" checkbox for the new stuff.
This one is pretty clean since the "Done" checkbox doesn't do too much weird magic.
Test Plan: Clicked the box a few times.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17888
Summary:
Ref T12616. This doesn't pull over everything (some UI feedback didn't make it yet, and you can't cancel + undo cancelling edits yet) but editing comments technically works.
This is a little shaky, but feels less shaky than every other approach I've tried, so I think I'm finally on a reasonable track here.
Test Plan: Edited some inline comments.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17887
Summary:
Ref T12616. Fixes T12153. Currently, when you hide inlines, they hide completely and turn into a little bubble on the previous line.
Instead, collapse them to a single line one-by-one. Narrowly, this fixes T12153.
In the future, I plan to make these changes so this feature makes more sense:
- Introduce global "hide everything" states (T8909) so you can completely hide stuff if you want, and this represents more of a halfway state between "nuke it" and "view it".
- Make the actual rendering better, so it says "epriestley: blah blah..." instead of just "..." -- and looks less dumb.
The real goal here is to introduce `DiffInline` and continue moving stuff from the tangled jungle of a million top-level behaviors to sensible smooth statefulness.
Test Plan:
- Hid and revealed inlines in unified and two-up modes.
- These look pretty junk for now:
{F4948659}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616, T12153
Differential Revision: https://secure.phabricator.com/D17861
Summary: Ref T12616. This cements the relationship between ChangesetList (parent container) and Changeset (child) and passes translations down so Changeset can use them to translate the text "Loading..."
Test Plan: Viewed loading changes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17846
Summary: Ref T12616. This ends up being a little messy ("one giant function") and maybe I'll clean it up a bit later, but continue consolidating the wild jungle of behaviors into a smaller set of responsible objects.
Test Plan: Clicked all the menu options, saw them work properly. Grepped for removed methods.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17845
Summary:
Ref T12616. Diffusion, only, has a "Show All Context" button which expands the full context on all changes.
I don't remember the exact history on this, but it hasn't existed in Differential for some time and no one has complained. I suspect that the "View Options > Show All Context" on each file may replace it. I can't really come up with good reasons to use it, offhand. If we want to restore it, I think global options after T1591 is promising.
{F4945561}
Test Plan:
- Loaded a commit in Diffusion, no longer saw a button.
- Grepped for relevant sigils.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17843
Summary: Ref T12616. This class is already mostly-reasonable as a representation of an individual changeset, so I plan to just adjust it a little bit.
Test Plan:
- Used `git grep` to search for `ChangesetViewManager`.
- Used `git grep` to search for `changeset-view-manager`.
- Browsed around and interacted with changesets.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17842
Summary: Ref T12616. Put these listeners in DiffChangesetList so the wake/sleep properly for Quicksand.
Test Plan:
- Added some logging.
- With quicksand, moved between diffs.
- Saw "load" and "show more" fire exactly once on each page, with the correct changeset list listener.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17841
Summary:
Ref T12616. Ref T8047. Ref T11093. We currently have several bugs where diff state sticks across Quicksand pages.
Add a new top-level object to handle this, with `sleep()` and `wake()` methods. In `sleep()`, future changes will remove/deacivate all the reticles/editors/etc.
See T12616 for high-level discussion of plans here.
This general idea is likely to become more formal eventually (e.g. for "sheets" or whatever we call them, in T10469) but I think this is probably a reasonable place to draw a line for now.
Test Plan:
- Added some logging to sleep(), wake() and construct().
- Viewed changes in Differential.
- With Quicksand on, browsed around; saw state change logs fire properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616, T11093, T8047
Differential Revision: https://secure.phabricator.com/D17840
Summary: Moves Conpherence to use EditEngine. This removes the "First Message" field, but I think that's ok until we have direct messaging of some sort, then maybe have built-ins cover that case.
Test Plan:
- Visit /new/ and /edit/ for creating new rooms.
- Edit a room in full conpherence
- Edit a room in durable column
- grep for METADATA calls
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11729
Differential Revision: https://secure.phabricator.com/D16677
Summary: This adds some basic per user / per room theming for Conpherence, which should hopefully let users identify rooms from just the sidebar color.
Test Plan: Lots of threads with different colors.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17747
Summary:
Ref T12562. I think the pre-send-on-enter behavior was: disable textarea, send message, clear area on response?
That got changed but not completely, maybe. There's currently an issue here:
- Add a `sleep(3)` to `UpdateController`.
- Type "AAA".
- Press enter.
- Real fast, type "BBB".
- When the "AAA" arrives, your "BBB" is lost. Sad!
Test Plan:
- Did the thing described above; no longer lost "BBB".
- Switched threads, sent messages, couldn't find anything else this breaks. It dates from a long time ago so I think it's just pre-SOE stuff.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12562
Differential Revision: https://secure.phabricator.com/D17742
Summary:
Fixes T12599. If you're faster than the network request, we don't actually resolve your query when the data arrives.
Instead, when the data shows up, run the query if the user has typed something.
Test Plan: Pasted a filename in real fast, got results. (Previously: no results until you press something else.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12599
Differential Revision: https://secure.phabricator.com/D17739
Summary:
Ref T12566. Ref T12563. This fixes three bugs with Aphlict replay stuff:
First, Conphernece would try to repaint the UI even if no thread was open. Only repaint when a thread is open.
Second, although we deduplicate JX.Leader messages, we didn't deduplicate actual notification messages. If you browsed the leader window, then it re-elected itelf as a leader and replayed history, it could rebroadcast notifications and other windows could show doubles. Deduplicate notifications to prevent this.
Third, we always replayed the last 60 seconds of history. When you browsed the leader window, whichever window became the new leader (possibly the one you just browsed) could replay messages from before it had opened, leading to duplicate messages. Particularly, after receiving a message and then browsing you could see that message again. Instead, only replay history as far back as when the window first opened.
Test Plan:
- Clicked "Repaint" with a thread open, saw a repaint. Clicked "Repaint" with Conpherence open but no thread, no repaint and no 404 request to `/update/null/`.
- In browser A, opened three windows. In browser B, sent a notification. In browser A, browsed the leader window away twice in a row. Observed that the window which never became a leader doesn't duplicate notifications.
- In browser A, opened three windows. In browser B, sent a notification. In browser A, browsed the leader window away over and over again. Observed that replay requests issued with appropriate history windows.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12566, T12563
Differential Revision: https://secure.phabricator.com/D17722
Summary: Ref T12573. This sends a "ping" to the server, and a "pong" back to the client, every 15 seconds. This tricks ELBs into thinking we're doing something useful and productive.
Test Plan: Ran `bin/aphlict debug`, loaded Phabricator, saw ping/pong in logs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12573
Differential Revision: https://secure.phabricator.com/D17717
Summary: Ref T12566. When we reconnect, refresh the current thread even if we replayed notifications.
Test Plan:
- Clicked the "Repaint" button, saw the thread refresh.
- Clicked the "Reconnect" button, saw the thread reresh.
- Launched `aphlict debug`, killed it, restarted it, saw the thread refresh after reconnect.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12566
Differential Revision: https://secure.phabricator.com/D17713
Summary:
Fixes T12564. We already had some code which seems to deal with this properly, it just wasn't getting used.
Assign each application-level notification a unique ID, then ignore messages with duplicate IDs.
Test Plan:
- In browser A, loaded `/T123`.
- In browser B, loaded `/T123`.
- Made a comment as B.
- Saw notification as A.
- Mashed "Replay" a bunch.
- Before patch: piles of duplicate notifications.
- After patch: no duplicates.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12564
Differential Revision: https://secure.phabricator.com/D17710
Summary:
Fixes T12563. If we've ever seen an "open", mark all future connections as reconnects. When we reconnect, replay recent history.
(Until duplicate messages (T12564) are handled better this may cause some notification duplication.)
Also emit a reconnect event (for T12566) but don't use it yet.
Test Plan: {F4912044}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12563
Differential Revision: https://secure.phabricator.com/D17708
Summary: Ref T12568. Ref T12567. Allows you to force a reconnect, and shows the reconnect delay on connection close/failure.
Test Plan: {F4911879}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12568, T12567
Differential Revision: https://secure.phabricator.com/D17705
Summary: Ref T12568. This begins building toward a more useful realtime debugging console for Leader/Aphlict/general realtime stuff.
Test Plan: {F4911521}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12568
Differential Revision: https://secure.phabricator.com/D17701
Summary: Fixes T12556 Uses more common components in ConpherenceThreadList by moving to PHUIListItemView. Reduces clutter by moving privacy into the header. Gets ride of "See More" double interchanges.
Test Plan:
I need to test this more, doesn't seem to auto-select top room any more, also might build a lipsum generator.
- Create lots of rooms with various policies
- Test clicking on policy object
- Click on different rooms
- Post in rooms
- Load up second account, see room numbers
- Clear room message count by clicking on room
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12556
Differential Revision: https://secure.phabricator.com/D17698
Summary: Fixes T12138. Test for the presence of being in fullscreen mode, and disable send on enter if present. Side note, I'd love a first class "hasClass" type Javelin function.
Test Plan:
- Go to Conpherence
- Type some smack, see it send on enter
- Go fullscreen like a boss
- Let the words flow
- Close fullscreen, then send on enter.
- (might be nice someday to add a "submit" button to fullscreen editor)
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12138
Differential Revision: https://secure.phabricator.com/D17590
Summary:
Ref T12314. Ref T6064. Ref T11580. If an install defines several different task create forms (like "Create Plant" and "Create Animal"), allow any of them to be created directly onto a workboard column.
This is just a general consistency improvement that makes Custom Forms and Workboards work together a bit better. We might do something fancier eventually for T6064 (which wants fewer clicks) and/or T11580 (which wants per-workboard control over forms or defaults).
Test Plan:
- Created several different types of tasks directly onto a workboard.
- Faked just one create form, saw the UI unchanged (except that it respects any renaming).
{F3492928}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12314, T11580, T6064
Differential Revision: https://secure.phabricator.com/D17446
Summary:
See downstream <https://phabricator.kde.org/T5404>. This code was doing some `.firstChild` shenanigans which didn't survive some UI refactoring.
This whole UI is a little iffy but just unbreak it for now.
Test Plan: Allowed and rejected desktop notifications, got largely reasonable UI rendering.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17388
Summary: Fixes T12248. Adds a flag for movable panels, and only allows those to be moved. Also cleaned up some CSS rules missing once a panel was drug into a new position.
Test Plan: Try to drag a tab panel content pane, cannot. Drag normal pane, see CSS, grab and drag same panel back, CSS looks the same.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12248
Differential Revision: https://secure.phabricator.com/D17356
Summary: Ref T12232. I can't reproduce the original issue, but this should probably fix it without side effects?
Test Plan: Added a card with Stripe, but I could do that before too.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12232
Differential Revision: https://secure.phabricator.com/D17333
Summary:
Fixes T12152. When creating a subproject task directly from a parent project, we can get column information back about the subproject column, which isn't visible. Just ignore this rather than trying to draw a card into a column which does not exist.
This flow (see test plan) is a little unintuitive since the card never appears on the workboard, but this class of things is probably roughly somewhere in T4900.
Test Plan:
- Create a parent project A.
- Create subproject B.
- On the workboard for A, select "Create Task..." from the dropdown.
- Add tag "B" in the dialog that pops up.
- Save the task.
Note that this flow creates a task tagged only with "B", since "A" and "B" are mutually exclusive tags.
Before patch: UI freezes (JX.Mask is never removed), JS error in console.
After patch: workflow completes. Note that card is (correctly) not visible: it's in an invisible subproject column.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12152
Differential Revision: https://secure.phabricator.com/D17242
Summary:
Earlier, I made some changes so that when you create or edit an inline, the comment at the bottom of the page updates (even though you didn't fiddle with the stacked actions inputs).
At the last second I broke them by spelling this wrong while cleaning things up, so they didn't actually work. Spell the property correctly ("showPreview", not "shouldPreview").
Also, we have some JS which rewrites "Not Visible" into "View", but it fires in an inconvenient way now and is flickery for me. Ideally this should get cleaned up slightly better eventualy, but at least make is stop doing so much flickery layout for now.
Test Plan:
- Wrote no comment on a revision.
- Added an inline.
- Saw comment preview properly update immediately.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17229
Summary:
See D17210. Currently, this handler needs to be installed on each menu that doesn't build with the default behavior.
Rather than copy-pasting it to the user menu, try to make it a default behavior. This adds a new rule: don't close the menu if the item is a dynamic item built in JS with PHUIXActionView.
This allows dynamic items to control the menu themselves, while giving static items the desired default behavior.
Test Plan:
- Opened menus on: dashboards, user menu, timeline comments. Clicked stuff. Menus went away.
- Other menus still seemed to work right: Diffusion, Favorites, mobile menu.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17222
Summary: Ref T5867. I sure love Javascript.
Test Plan: Navigated between Home, Diffusion and Differential, opening the user profile menu. Saw appropraite help items.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5867
Differential Revision: https://secure.phabricator.com/D17214
Summary: Fixes T12065. Some of the normal behavior of these actions got juggled when I made "Accept" and "Reject" conflict.
Test Plan:
- Added "Accept".
- Added "Reject", saw it remove "Accept".
- Added "Change Projects".
- Added "Assign/Claim".
- Removed "Assign/Claim".
- Removed "Accept".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12065
Differential Revision: https://secure.phabricator.com/D17143
Summary:
Ref T11114. When a user selects "Accept", and then selects "Reject", remove the "Accept". It does not make sense to both accept and reject a revision.
For now, every one of the "actions" conflicts: accept, reject, resign, claim, close, commandeer, etc, etc. I couldn't come up with any combinations that it seems like users are reasonably likely to want to try, and we haven't received combo-action requests in the past that I can recall.
Test Plan:
- Selected "Accept", then selected "Reject". One replaced the other.
- Selected "Accept", then selected "Change Subscribers". Both co-existed happily.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17132
Summary:
Ref T11114. Recent changes broke the links to jump to inline comments from the previews because they get hooked up with JS.
Restore the linking behavior.
Test Plan: Clicked "View" on an inline comment preview, jumped to that comment.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17131
Summary: Ref T11114. This comments nearly working on EditEngine. Only significant issue I caught is that the "View" link doesn't render properly because it depends on JS which is tricky to hook up. I'll clean that up in a future diff.
Test Plan: {F2279201}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17116
Summary: Reorgaizes the CSS here a bit, by object list style, adds in a new drag ui class, which will be used in menu ordering.
Test Plan:
Workboards, Home Apps.
{F2126266}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17057
Summary:
Persona is going to be decommed November 30th, 2016.
It is highly unlikely that anyone is currently using persona as a real
login method at this point.
Test Plan: tried locally to add auth adapter.
Reviewers: chad, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D16371
Summary: Fixes T11791. We do this in durable column, but not in regular Conpherence. I think this is the right place? Not sure how this will feel with high lag.
Test Plan: Submit lots of text in a Conpherence.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11791
Differential Revision: https://secure.phabricator.com/D16969
Summary: Redesign the action comment box for better use in two column, mobile, nuance.
Test Plan: Test in mobile / desktop / tablet, adding and removing actions. Actionless comment boxes, etc.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: cspeckmim, Korvin
Differential Revision: https://secure.phabricator.com/D16811
Summary: Ref T11809. These have been replaced with more flexible storage that accommodates a wider range of behaviors, including those in the ICS format and RRULEs.
Test Plan:
- Ran migration.
- Viewed, created, edited events.
- Grepped for all removed names/symbols.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11809
Differential Revision: https://secure.phabricator.com/D16789
Summary:
This feels a little cleaner:
- Clean up transaction log a bit.
- Use a checkbox instead of a two-option dropdown.
This is a little messy because the browser doesn't send anything if the user submits a form with an un-clicked checkbox.
We now send a dummy value ("Hey, there's definitely a checkbox in this form!") so the server can figure out what to do.
Test Plan:
- Edited all-dayness of an event.
- Viewed transaction log.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16776
Summary: I think maybe these should be more separate from JX.Title, but seems to work ok. May build new favicons just for messages though. Proof of concept UI.
Test Plan: Send message on one browser, see red icon in other browser. Click on menu, count and favicon switch back to normal.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16734
Summary: Fixes T11764. Moves rendering of the column to client-side, which can skip if it detects we're on mobile.
Test Plan: Open column on desktop, switch to mobile, don't see column. Toggle column on mobile on and off. Switch back to desktop.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11764
Differential Revision: https://secure.phabricator.com/D16725
Summary: This removes 'full-display', 'minimal-display' from Conpherence, which I recall was because we had 2 UIs for column and regular chat. I'm also tossing in slightly nicer search results, with a link to the actual message and the full date shown for context.
Test Plan: Post a message in mobile, tablet, full conpherence, and in durable column. Clean up UI in durable column. Do a search in Full UI, click on result date, get taken to the message... usually. My test data is a little wonky, but I think this works most of the time.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16710
Summary: This focuses the search field when the user opens search, and then the textarea for pontificate if the search box is closed.
Test Plan: Open/Close/Open/Close
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16709
Summary: I passed this in as a config, but need to parse it live when threads change, otherwise the wrong room could be searched.
Test Plan: Search in one room, click a second, search again, see correct results.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16707
Summary: Fixes the send on enter flash, only uses the `Threads` loading animation on changing threads, not sending a message.
Test Plan: Change threads, post a message.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16705
Summary: Adds a search bar toggle and results for searching inside a Conpherence Room. The UI of the results itself are not styled yet, and will follow up with another diff.
Test Plan: Go to Conpherence, search for "asdf", get lots of results. Search for nothing, get no change, search for something fictitious, get no threads found (will follow up with search result UI).
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16697
Summary: Ref T11730. Removes unused code since this is now it's own page.
Test Plan: rebuild maps, grep for javelin code, classnames
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11730
Differential Revision: https://secure.phabricator.com/D16700
Summary: When the durable column is re-opened, scroll user to latest message. Though later we should scroll them to the last read.
Test Plan: Minimize window, reload page, pop up window, see proper scroll position.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16649
Summary: A bit better styling, this adds an indication icon for if you're connected or not (and later, away, etc).
Test Plan: Test in Notifications menu, Conpherence full, Durable Column.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16647
Summary: Sends and stores additional body classes at the page level. Removes old ones, sets new ones.
Test Plan: home -> application search -> colored workboard -> config -> home with persistent chat open and minimized.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16646
Summary: This exposes the chat window to a larger audience beside people who accidentaly hit `\`.
Test Plan:
Lots of clicks and reloads.
{F1856043}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16643
Summary: This feels pretty reasonable with little effort, and I think I'd use it more than the full column.
Test Plan:
Chat a lot on various pages.... still some quicksand quirks around various pages.
{F1853487}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: scp, Korvin
Differential Revision: https://secure.phabricator.com/D16627
Summary: Fixes T11623. Enables send-on-enter and shift-enter for linebreaks, per durable column. Also cleaned up UI for Joining Room or Logging In.
Test Plan: See room I can join, click Join Room. Leave Room, Log out, visit room with login prompt. Login, Join Room again.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11623
Differential Revision: https://secure.phabricator.com/D16595
Summary:
Fixes T11703. This mostly avoids rounding errors.
If point values include "0.001", we also get three digits of precision: 1.000.
Maybe useful if your point field is called "bitcoins" or something.
Test Plan:
Before:
{F1851404}
After:
{F1851405}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11703
Differential Revision: https://secure.phabricator.com/D16601
Summary: Mostly quality of life in renames and moving everything to the view class. Minor CSS tweaks. Fix room handles getting added when adding a new user.
Test Plan: Add to room, remove from room.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16560
Summary:
Minor rebuild / redesign of Conpherence. Most of this is new UX and tossing out things like widgets, device fallbacks. I expect some of the UI to get more polished after next pass, but most everything here is in place.
- Removed "Widgets", now just a single Participants pane
- Added "Topic"
- New header
- Settings, Edit are action icons
- Removed a lot of JS
- Simplified CSS as much as I could
Test Plan:
Desktop, Tablet, Mobile. Adding and removing people. Setting new topics, new rooms.
{F1828662}
{F1828669}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16550
Summary: This adds a "column" icon into crumbs, like in workboards, for expanding or hiding the "Widget Pane". This is per user sticky and defaults to off.
Test Plan: View a Conpherence Room, see no widgets by default. Toggle it on, see widget. Reload page, see widget stick. Verify mobile, tablets ignore hiding.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10364
Differential Revision: https://secure.phabricator.com/D16533
Summary:
Moves search and new room out of crumb bar and into the thread column. This opens up space to add "Edit Room" into the crumbs area as an action link. Also removed 'widget-edit' pathways and javascript.
Fixes T8972
Test Plan:
Search, New, Edit rooms. Click different rooms, see correct URL each time.
{F1813226}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T8972
Differential Revision: https://secure.phabricator.com/D16543
Summary:
Two minor issues that I caught in the log while fixing Phame permissions:
- We had a JS bug which would cause us to immediately generate two comment previews at the exact same time -- one for loading the page, and one for "switching to desktop". Instead, only generate the "switch to desktop" preview if we really switched to desktop from a different device layout.
- These two requests could end up reading/writing the VersionedDraft table at exactly the same time fairly often (e.g., after a comment submission, the page would load, send two preview requests at exactly the same time, and they'd race fairly reliably for me locally). If we do race, recover from the race.
Test Plan:
Submitted some Phame comments.
- No more error log errors about VersionedDraft keys.
- Saw only one preview request when loading the page instead of two.
Here's the specific stack trace I caught:
```
[Mon Sep 05 12:15:33.639930 2016] [:error] [pid 50608] [client 127.0.0.1:55278] [2016-09-05 14:15:33] EXCEPTION: (AphrontDuplicateKeyQueryException) #1062: Duplicate entry 'PHID-POST-fknnpzjnsdgc3rqobhst-PHID-USER-pr5rjpuilpfserepsd2k-13' for key 'key_object' at [<phutil>/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:314]
[Mon Sep 05 12:15:33.640801 2016] [:error] [pid 50608] [client 127.0.0.1:55278] arcanist(head=master, ref.master=9e82ef979e81), corgi(head=master, ref.master=5b9171222bc9), instances(head=stable, ref.master=485bc8128198, ref.stable=2983bc917601), ledger(head=master, ref.master=4da4a24b8779), libcore(), phabricator(head=phame2, ref.master=4b6da9735ba7, ref.phame2=4b6da9735ba7), phutil(head=stable, ref.master=97f05269fdb1, ref.stable=c14343ee620e), services(head=stable, ref.master=1fcb5cdb7582, ref.stable=2d8088a5b4b3)
[Mon Sep 05 12:15:33.640815 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #0 <#2> AphrontBaseMySQLDatabaseConnection::throwCommonException(integer, string) called at [<phutil>/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:348]
[Mon Sep 05 12:15:33.640830 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #1 <#2> AphrontBaseMySQLDatabaseConnection::throwQueryCodeException(integer, string) called at [<phutil>/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:289]
[Mon Sep 05 12:15:33.640833 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #2 <#2> AphrontBaseMySQLDatabaseConnection::throwQueryException(mysqli) called at [<phutil>/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:185]
[Mon Sep 05 12:15:33.640836 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #3 <#2> AphrontBaseMySQLDatabaseConnection::executeRawQuery(string) called at [<phutil>/src/xsprintf/queryfx.php:8]
[Mon Sep 05 12:15:33.640839 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #4 <#2> queryfx(AphrontMySQLiDatabaseConnection, string, string, string, array, string)
[Mon Sep 05 12:15:33.640841 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #5 <#2> call_user_func_array(string, array) called at [<phutil>/src/aphront/storage/connection/AphrontDatabaseConnection.php:42]
[Mon Sep 05 12:15:33.640844 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #6 <#2> AphrontDatabaseConnection::query(string, string, string, array, string) called at [<phabricator>/src/infrastructure/storage/lisk/LiskDAO.php:1261]
[Mon Sep 05 12:15:33.640846 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #7 <#2> LiskDAO::insertRecordIntoDatabase(string) called at [<phabricator>/src/infrastructure/storage/lisk/LiskDAO.php:1106]
[Mon Sep 05 12:15:33.640849 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #8 <#2> LiskDAO::insert() called at [<phabricator>/src/infrastructure/storage/lisk/LiskDAO.php:1075]
[Mon Sep 05 12:15:33.640851 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #9 <#2> LiskDAO::save() called at [<phabricator>/src/applications/draft/storage/PhabricatorVersionedDraft.php:65]
[Mon Sep 05 12:15:33.640854 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #10 <#2> PhabricatorVersionedDraft::loadOrCreateDraft(string, string, integer) called at [<phabricator>/src/applications/transactions/editengine/PhabricatorEditEngine.php:1669]
[Mon Sep 05 12:15:33.640857 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #11 <#2> PhabricatorEditEngine::buildCommentResponse(PhamePost) called at [<phabricator>/src/applications/transactions/editengine/PhabricatorEditEngine.php:894]
[Mon Sep 05 12:15:33.640859 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #12 <#2> PhabricatorEditEngine::buildResponse() called at [<phabricator>/src/applications/phame/controller/post/PhamePostEditController.php:60]
[Mon Sep 05 12:15:33.640862 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #13 <#2> PhamePostEditController::handleRequest(AphrontRequest) called at [<phabricator>/src/aphront/configuration/AphrontApplicationConfiguration.php:237]
[Mon Sep 05 12:15:33.640865 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #14 phlog(AphrontDuplicateKeyQueryException) called at [<phabricator>/src/aphront/handler/PhabricatorAjaxRequestExceptionHandler.php:27]
[Mon Sep 05 12:15:33.640868 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #15 PhabricatorAjaxRequestExceptionHandler::handleRequestException(AphrontRequest, AphrontDuplicateKeyQueryException) called at [<phabricator>/src/aphront/configuration/AphrontApplicationConfiguration.php:644]
[Mon Sep 05 12:15:33.640870 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #16 AphrontApplicationConfiguration::handleException(AphrontDuplicateKeyQueryException) called at [<phabricator>/src/aphront/configuration/AphrontApplicationConfiguration.php:242]
[Mon Sep 05 12:15:33.640873 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #17 AphrontApplicationConfiguration::processRequest(AphrontRequest, PhutilDeferredLog, AphrontPHPHTTPSink, MultimeterControl) called at [<phabricator>/src/aphront/configuration/AphrontApplicationConfiguration.php:149]
[Mon Sep 05 12:15:33.640879 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #18 AphrontApplicationConfiguration::runHTTPRequest(AphrontPHPHTTPSink) called at [<phabricator>/webroot/index.php:17]
```
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16494
Summary: Ref T11132. This gets rid of the red bar for admins and instead shows a new menu item next to notifications/chat if there are unresolved configuration issues. Menu goes away if there are no issues. May move this later into the bell icon, but think think might be the right place to start especially for NUX and updates. Maybe limit the number of items?
Test Plan:
Tested with some, lots, and no config issues.
{F1790156}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16461
Summary:
Fixes T11468. I was able to find //a// reproduction case for the issue, at least, described in my comments there.
When the server sends back position information for columns we aren't displaying, for whatever reason, just ignore that information.
Future work in T4900 to do more synchronization may revisit this.
Test Plan: See T11468#190177 for steps. Did that stuff with this patch, got a clean edit.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11468
Differential Revision: https://secure.phabricator.com/D16397
Summary:
Ref T11326. Currently, we link Calendar days using hidden DOM nodes.
This is nice because it's simple, and right-clicking a day works properly. However, it's a bit ugly/unintuitive, messy, and unclear. It's especially messy because days are really two different rows, one for events and one for day/week numbers.
Instead, use JS to highlight day cells. You can still right-click by clicking the actual day number, which seems like a reasonable compromise.
Test Plan: {F1738941}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16334
Summary:
Ref T11326. When an event is all-day, hide the time controls for the start/end dates. These aren't used and aren't helpful/useful.
This got a little more complicated than it used to be because EditEngine forms may have only some of these controls present.
Test Plan: Edited an all-day event; edited a normal event; swapped an event between normal and all-day.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16327
Summary: Ref T11326. This just cleans things up a little and removes some of the obvious layout/CSS issues.
Test Plan:
- Viewed day view before/after. Also viewed profile panel.
Before:
{F1725547}
After:
{F1725548}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16308
Summary: Fixes T9202.
Test Plan:
- Viewed day in 12-hour, saw "8:00 PM".
- Viewed day in 24-hour, saw "16:00".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9202, T10932
Differential Revision: https://secure.phabricator.com/D16290
Summary:
Ref T4788. This fixes all the bugs I was immediately able to catch:
- "Directory-Like" graph shapes could draw too many vertical lines.
- "Reverse-Directory-Like" graph shapes could draw too few vertical lines.
- Terminated, branched graph shapes drew the very last line to the wrong place.
This covers the behavior with tests, so we should be able to fix more stuff later without breaking anything.
Test Plan:
- Added failing tests and made them pass.
{F1708158}
{F1708159}
{F1708160}
{F1708161}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788
Differential Revision: https://secure.phabricator.com/D16216
Summary: Ref T6523. Allows you to click stuff instead of using drag-and-drop.
Test Plan: On iOS simulator, created and updated a mock.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6523
Differential Revision: https://secure.phabricator.com/D16088
Summary: Bumping this up higher since two column views get extra tight fast below 900 px. This felt most correct to me, dialing it back from first attempt at 960. Mostly I don't want to ever accidentally trigger it when I'm on the 12" MacBook. Ref T10926
Test Plan: Durable Column, Workboards, Dashboards, Tasks.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: avivey, Korvin
Maniphest Tasks: T10926
Differential Revision: https://secure.phabricator.com/D15960
Summary: Fixes T10816. The way these work is a little unusual since these chunks of file-rendering code are unusuall performance-sensitive, so the Differential version doesn't adapt directly to Diffusion. Both can possibly be unified at some point in the future, although they do slightly different things.
Test Plan: {F1220170}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10816
Differential Revision: https://secure.phabricator.com/D15719
Summary:
Ref T10698. Currently, we show the spacer/continuation lines around previews, but these don't make sense in previews.
(Other stuff also uses this code so I can't simply remove `spacer`.)
Test Plan:
Before:
{F1199924}
After:
{F1199925}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10698
Differential Revision: https://secure.phabricator.com/D15562
Summary:
Fixes T10646. When you load the page or click "New Condition" or "New Action", we try to add a condition and action with some default values.
Currently, the logic just sets everything to `null` or `'default'`. This technically works in Safari, but is less successful in Chrome. (I think Safari prevents you from picking an invalid value.)
Instead of relying on the browser to pick the right value, set the correct value explicitly.
Test Plan:
- Created a new rule in Chrome, Safari.
- Added fields and conditions in Chrome, Safari.
- Edited existing rules in Chrome, Safari.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10646
Differential Revision: https://secure.phabricator.com/D15507
Summary: See Q335. This might need some tweaking, but the JS works now so we can move/style the node now.
Test Plan:
{F1169168}
- Also dragged stuff around, saw counts update properly.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15462
Summary:
These columns were conflating `projectPHID` (the defualt project to add to the task) with `boardPHID` (the board the column appears on).
Separate them to fix the beahvior.
Test Plan: Used "Add Task" from dropdown menu of a milestone column on a parent project's workboard.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15242
Summary: Ref T4427.
Test Plan:
- Dragged a 17 XP task from "Hunting" to "Slain".
- Saw 17 XP move.
- Level up!
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4427
Differential Revision: https://secure.phabricator.com/D15237
Summary:
Ref T4900. Briefly:
- Much more layout and rendering is now done in Javascript.
- This should otherwise be identical to the behavior at HEAD, except that:
- editing a task and removing the current board from it no longer removes the task; and
- points still don't work.
However, this can now plausibly support realtime workboard updates and other complex state-based behaviors like points calculations in a future change.
Test Plan:
- Changed card covers.
- Moved cards.
- Sorted board by priority and natural.
- Added new cards.
- Edited cards in place.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15234
Summary:
Ref T4900. To eventually support realtime board updates, we need to be able to perform a board state update without the context of the action which caused it.
For example, if the server says "update card Y", we need to know what to do without being told "card Y was moved from column A to column B" explicitly. Currently, all the update code relies on knowing what happened and which nodes were affected.
This is only a small step forward, but starts making things a bit more independent and consistent.
Test Plan:
- Moved cards around.
- Changed card cover images.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15228
Summary:
Ref T4900. The root problem is that dragging stuff near the bottom of the board can cause jittery, jumpy behaviors.
Internal scrolling has changed the nature of this problem. Previously, the height of the board itself would jump around, but it's now fixed so the height of columns jumps around instead.
We could take the same approach and add a chunk to the bottom of each column when a drag starts, but this is really distracting visually since it's obvious to the user.
Instead, treat columns as infinitely tall (so dragging beneath them still counts as dragging to the bottom position).
Test Plan:
- View a board with a column taller than the screen (has a scrollbar).
- Drag a card to near the bottom position.
- Move the mouse down a little bit at a time, continuing toward the bottom of the page.
- Before patch: at some point, UI flips out and starts rapidly adding, scrolling, and removing the ghost.
- After patch: sensible behavior, ghost is in bottom position for all cursor locations.
Also works for dragging to the top.
(This leaves us with a little less dead space for cancelling drags, but you've still got the left menu, anything offscreen, and the escape key, which seems fine.)
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15227
Summary:
Ref T4900. This gets moves on the new stuff and cleans them up a little.
Two behaviors haven't been ported yet: height adjustment during drags (which is broken anyway with inner scroll) and updating point counts (coming soon).
Test Plan: Dragged cards around on a board, including top/bottom positions and normal/priority sort.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15226
Summary: Ref T4900. Continuing to move this over into a more structured approach.
Test Plan: Panned a workboard.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15225
Summary:
Ref T4900. Broadly, workboard state management is fairly ad-hoc now, which makes things like this (where some kind of edit affects global state) difficult:
- Updating points header to reflect a sum change after dragging a task.
- Changing progress bars after editing a task to change resolution or points value.
- Moving a card to the correct column after editing it and changing subprojects/iterations.
- Responding to real-time notifications about other users moving cards.
This begins rewriting the code in a way that can better accommodate these kinds of far-reaching state update.
This change just moves cover image stuff. I'll continue moving features one at a time until boards work better.
Test Plan: Updated some cover images.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15224
Summary:
Ref T5240. For boards with a lot of columns and users without "shift + mousewheel" or a touchpad, allow click-drag on the board background to pan the board horizontally.
The `ew-resize` cursor cue might be a little too intense. If it's annoying, we could drop it and just leave this as a secret feature to discover.
Test Plan: Panned the board horizontally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5240
Differential Revision: https://secure.phabricator.com/D15211
Summary: This was slightly more complex than I believed, but not too terrible.
Test Plan:
{F1096126}
- Also used some normal file uploaders to make sure I didn't break that.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15202
Summary:
Fixes T4136.
When listing projects in the "Visible To" selector control:
- Instead of showing every project you are a member of, show only a few.
- Add an option to choose something else which isn't in the menu.
- If you've used the control before, show the stuff you've selected in the recent past.
- If you haven't used the control before or haven't used it much, show the stuff you've picked and them some filler.
- Don't offer milestones.
- Also don't offer milestones in the custom policy UI.
Test Plan:
{F1091999}
{F1092000}
- Selected a project.
- Used "find" to select a different project.
- Saw reasonable defaults.
- Saw favorites stick.
- Tried to typeahead a milestone (nope).
- Used "Custom Policy", tried to typeahead a milestone (nope).
- Used "Custom Policy" in general.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4136
Differential Revision: https://secure.phabricator.com/D15184
