Summary: Evidently I only tested adding a question, not an answer. Properly set the getter. Also, fixed some header spacing.
Test Plan: Add a question, add an answer. See everything work, proper spacing.
Reviewers: epriestley, avivey
Reviewed By: avivey
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15341
Summary:
I'm having trouble figuring out exactly what the timeframe on this was, but for a while in November we were not writing edges between pastes and their attached files correctly.
An example of this on this install is here:
https://secure.phabricator.com/P1893
That will start working once the migration runs, but until it does it shows this:
{F1126605}
This got fixed so recent stuff works fine, but it looks like WMF updated while the bug was active so they have more affected pastes than we do (we only have about 10).
Test Plan:
Ran this query to find pastes with missing edges:
```
select id, FROM_UNIXTIME(p.dateCreated) from pastebin_paste p LEFT JOIN edge ON edge.src = p.phid AND edge.type = 25 WHERE edge.dst IS NULL order by id;
```
Ran the migration.
Verified the edges were fixed.
Viewed one of the affected pastes, things now worked properly.
Reviewers: chad
Reviewed By: chad
Subscribers: 20after4
Differential Revision: https://secure.phabricator.com/D15340
Summary: Full new UI, testing some upcoming treatments for consideration in other View controllers. Small tweaks to allow PHUITwoColumnView to have fixed and fluid width, and let TransactionCommentView go fullWidth.
Test Plan:
Tested a number of Ponder cases, New Question, with and without summary, with and without answers, with and without comments. Mobile, Tablet, and Desktop layouts. Verify Project and Profile UI's still in tact.
{F1120961}
{F1120962}
{F1120963}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15315
Summary:
Ref T10349.
- Don't show subproject columns on "Manage Board".
- Fix "Edit Column" for milestone columns (allows you to set points, but not rename).
Test Plan:
- Viewed "Manage Board" on a project with subprojects.
- Edited a milestone column and set a point limit.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10349
Differential Revision: https://secure.phabricator.com/D15338
Summary: Fixes T10432. I missed these in making properties non-default.
Test Plan: Diffusion now works again in a cluster configuration.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10432
Differential Revision: https://secure.phabricator.com/D15337
Summary: Fixes T10413. I accidentally hid these //everywhere//, but only intended to hide them on workboards.
Test Plan:
- Viewed a workboard, saw un-archived projects only.
- Viewed a task detail page, saw archived and un-archived projects.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10413
Differential Revision: https://secure.phabricator.com/D15335
Summary:
Fixes T10414. I think this sorted by name at one time (the `asort()`) but then I probably added "Space SX" in front of it. Or I just got this wrong from the beginning.
Instead, sort by space name.
Test Plan: {F1126034}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10414
Differential Revision: https://secure.phabricator.com/D15334
Summary:
Fixes T10426. When the owner of a task changes, we try to add the old owner to CC so they're kept in the loop.
Currently, we do this unconditionally. This can add the owner as a subscriber when someone didn't change anything, which is confusing.
Instead, only do this if the owner actually changed.
Test Plan:
- With "A" as owner, edited task and saved.
- Before patch, A was added as subscriber.
- After patch, A not added.
- With "A" as owner, changed owner to "B" and saved.
- Both before and after patch, "A" is added as a subscriber.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10426
Differential Revision: https://secure.phabricator.com/D15333
Summary: Looks like the border was almost always overridden and the background was only slightly darker. Safe to remove these. Fixes T10424
Test Plan: Set Workboard to "red" see red workboard. Toggle CSS on and off on homepage, note little to no visual difference.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10424
Differential Revision: https://secure.phabricator.com/D15331
Summary: Fixes T10411. Ref T10246. There are probably still some rough edges with this, but replace the old-school endpoints with modern ones so we don't unprototype with deprecated stuff.
Test Plan:
- Made a bunch of calls to the new endpoints with various constraints/attachments.
- Created and edited services, devices, interfaces, bindings, and properties on everything.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10246, T10411
Differential Revision: https://secure.phabricator.com/D15329
Summary: Fixes T10409. Long term need to build a proper "PageEngine" of sorts for layouts not needing special magic. For now this just affects a few applications.
Test Plan: View Diffusion, Phriction, Phame, Legalpad, Diviner.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10409
Differential Revision: https://secure.phabricator.com/D15328
Summary:
Ref T10411. This cleans up / modernizes things and lets me get an `almanac.network.edit` API in the future.
This is mostly straightforward, except that Services have an extra "choose type" screen in front of them.
Test Plan:
- Created and edited Almanac networks, services, and devices.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10411
Differential Revision: https://secure.phabricator.com/D15326
Summary:
Fixes T10410. Immediate impact of this is that you can now actually delete properties from Almanac services, devices and bindings.
The meat of the change is switching from CustomField to EditEngine for most of the actual editing logic. CustomField creates a lot of problems with using EditEngine for everything else (D15326), and weird, hard-to-resolve bugs like this one (not being able to delete stuff).
Using EditEngine to do this stuff instead seems like it works out much better -- I did this in ProfilePanel first and am happy with how it looks.
This also makes the internal storage for properties JSON instead of raw text.
Test Plan:
- Created, edited and deleted properties on services, devices and bindings.
- Edited and reset builtin properties on repository services.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10410
Differential Revision: https://secure.phabricator.com/D15327
Summary:
Ref T10246. Ref T6741.
When you have a namespace like "phacility.net", require users creating services and devices within it to have edit permission on the namespace.
This primarily allows us to lock down future device names in the cluster, so instances can't break themselves once they get access to Almanac.
Test Plan:
- Configured a `phacility.net` namespace, locked myself out of it.
- Could not create new `stuff.phacility.net` services/devices.
- Could still edit existing devices I had permission for.
- Configured a `free.phacility.net` namespace with more liberal policies.
- Could create `me.free.phacility.net`.
- Still could not create `other.phacility.net`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6741, T10246
Differential Revision: https://secure.phabricator.com/D15325
Summary:
Ref T6741. Ref T10246.
Root problem: to provide Drydock in the cluster, we need to expose Almanac, and doing so would let users accidentally or intentionally create a bunch of `repo006.phacility.net` devices/services which could conflict with the real ones we manage.
There's currently no way to say "you can't create anything named `*.blah.net`". This adds "namespaces", which let you do that (well, not yet, but they will after the next diff).
After the next diff, if you try to create `repo003.phacility.net`, but the namespace `phacility.net` already exists and you don't have permission to edit it, you'll be asked to choose a different name.
Also various modernizations and some new docs.
Test Plan:
- Created cool namespaces like `this.computer`.
- Almanac namespaces don't actually enforce policies yet.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6741, T10246
Differential Revision: https://secure.phabricator.com/D15324
Summary: Ref T6741. Ref T10246. This is largely modernization, but will partially support namespace locking in Almanac.
Test Plan:
Searched for Almanac networks by name substring.
{F1121740}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6741, T10246
Differential Revision: https://secure.phabricator.com/D15322
Summary: Ref T10246. Build an ngram index for Almanac services, and use it to support improved search.
Test Plan: {F1121725}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10246
Differential Revision: https://secure.phabricator.com/D15321
Summary:
These trip me up every time because Differential has:
> Comment, Accept, Request Changes, Resign, Commandeer, Add Reviewers, Add Subscribers
while audits currently show:
> Comment, Add Subscribers, Add Auditors, Accept, Raise Concern, Resign
Now they're more or less in the same order which helps with muscle memory.
Test Plan: Careful inspection.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15323
Summary:
Fixes T10205. Ref T10246. Previously, the issue was that the result set was not ordered, so "More Results" would not have been able to work in a reasonable way if there were more than 100 matching interfaces.
You would have seen 100 interfaces more or less at random, then clicked "more" and gotten 100 more random interfaces.
Now, you would see 100 "a" interfaces, then click more to get the next 100 alphabetical interfaces (say, "b" and "c" interfaces).
Test Plan:
- Clicked browse when binding an interface.
- Got a browse dialog.
- Artificially set query limit to 1, paged through "local" interfaces in an ordered, consistent way.
{F1121313}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10205, T10246
Differential Revision: https://secure.phabricator.com/D15320
Summary:
Ref T10205. Ref T10246. This is general modernization, but also supports fixing the interface datasource in T10205.
- Update Query.
- Update SearchEngine.
- Use an ngrams index for searching names efficiently.
Test Plan:
- Ran migrations.
- Searched Almanac devices by name.
- Created a new device, searched for it by name.
{F1121303}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10205, T10246
Differential Revision: https://secure.phabricator.com/D15319
Summary:
Ref T10264. Under PHP 5.6, you are no longer allowed to use `compress.zlib://php://input` as an argument to either `fopen()` or `file_get_contents()`.
Instead, open `php://input` as a file handle, then add `zlib.inflate` as a stream wrapper. This requires some level of magic to work properly.
Test Plan:
First, I constructed a synthetic gzipped payload by typing some words into a file and using `gzcompress()` to compress it.
Then I used a `curl` command like this to make requests with it:
```
$ curl -X POST -H "Content-Length: 66" -H "Content-Type: text/plain" -H "Content-Encoding: gzip" --data-binary @payload.deflate -v http://127.0.0.1/
```
I modified Phabricator to just dump the raw request body and exit, and reproduced the issue under PHP 5.6 (no body, error in log) by brining up a micro instance in EC2 and installing php56 on it.
After this patch, it dumped the body properly instead, and PHP 5.5 also continued worked properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10264
Differential Revision: https://secure.phabricator.com/D15314
Summary: Not terribly useful. Also removed close your stuff reminder.
Test Plan: View question I asked and strangers question. Both layout more normal like.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15312
Summary: Ref T10394. Currently, these rules are only active if the Macro application is installed. Instead, install them unconditionally.
Test Plan:
- Used `{icon camera}` with Macro installed and uninstalled.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10394
Differential Revision: https://secure.phabricator.com/D15311
Summary:
This fix further addresses T10229. The problem and solution are the same:
- If the DOM is mutated during a touch, it never registers as a 'click' so the tapped button does not activate.
- This was partially addressed in D15136, which covered taps on code lines in a Differential view.
- Tapping on some buttons, like "Reply" or "Hide Comment" still caused the problem by showing a tooltip.
- There are probably similar buttons elsewhere, other than in Differential, exhibiting the same 'needs multiple taps to work' behaviour.
- The testing in the iOS simulator performed for D15136 did not reveal that the problem with "Hide comment" and such remained because the small device size used for testing triggered the `!= 'desktop'` path for tooltips.
To fix it:
- Don't show tooltips for touch events. You can't 'hover' with a finger (with today's tech) so that UI paradigm doesn't apply.
- Show the tooltips for regular mouse events, even if they are on the same device. Some devices have both touch and a mouse.
- No longer try to rely on a distinction between 'desktop' and 'mobile' devices. Mobile devices like the iPad Pro are essentially desktop like, and as mentioned above, a single device could be both touch and mouse enabled. It's not about the nature of the device, it's about the nature of the interaction.
Test Plan:
- Tapped "Hide Comment", "Reply" on an iPad Pro running iOS 9.2 and got single touch responses with no tooltips.
- Tried the same on an iPhone 6 running iOS 9.2.
- Hovered over the same on a regular desktop in Safari and saw tooltips. Clicked and saw regular reactions.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15310
Summary: Swapping out to PHUIDocumentProView to remove all calls to PHUIDocumentView.
Test Plan: Review the Phabricator Readme.MD in Diffusion
Reviewers: epriestley, avivey
Reviewed By: avivey
Subscribers: avivey, Korvin
Differential Revision: https://secure.phabricator.com/D15308
Summary:
WMF ran into this after their update. Here's the setup:
- When you enable Spaces, we leave all existing objects set to `null`, which means "these belong to the default space". This is so we don't have to go update a trillion objects.
- New objects get set to the default space explicitly (`PHID-SPCE-...`) but older ones stay with `null`.
- If you edit an older object (like a task) from the time before Spaces, //and// the form doesn't have a Visbility/Spaces control, we would incorrectly poplate the value with `null` when the effective value should be the default space PHID.
- This caused a "You must choose a space." error in the UI.
Instead, populate the control with the effective value instead of the literal database value. This makes the edit go through cleanly.
Also add a note about this for future-me.
Test Plan:
- Disabled "Visibility" control in task edit form.
- Edited an old task which had `null` as a `spacePHID` in the database.
- Before patch: UI error about selecting a Space.
- After patch: edit goes through cleanly.
Reviewers: chad, 20after4
Reviewed By: chad, 20after4
Subscribers: 20after4, aklapper
Differential Revision: https://secure.phabricator.com/D15306
Summary:
Ref T4245. This could still use a little UI smoothing, but:
- Don't require a callsign on the create flow (you can add one later in "Edit Basic Information" if you want).
- Allow existing callsigns to be removed.
Test Plan:
- Created a new repository with no callsign.
- Cloned it; pushed to it.
- Browsed around Diffusion a bunch.
- Visited a commit URI.
- Added a callsign to it.
- Removed the callsign again.
- Referenced it with `R22` in remarkup.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15305
Summary:
Ref T4245. This is a prelude to removing them from the "create" screen.
Currently, if you try to delete the callsign you get an unceremonious database error, but the next diff (or maybe two) will permit that, so I didn't put any "this is required yada yada" text in.
This could also maybe use some big flashing warning lights and a "if you edit this, all your URIs break" but I'll save that for later.
Test Plan: Changed the callsign for a repository.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15304
Summary: Ref T4245. When creating new repositories, set a default local path based on the repository ID instead of callsign.
Test Plan:
- Created a new repository.
- Saw it get a reasonable, ID-based local path.
- Edited a repository to make sure the `applyFinalEffects()` wasn't doing anything whacky.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15303
Summary: Ref T4245. Consolidates the URI parsing/rewriting logic so that repositories can be served from either `/diffusion/XYZ/` or `/diffusion/123/`, over both HTTP and SSH.
Test Plan:
- Pulled a Git repository by ID and callsign over HTTP and SSH.
- Pulled a Mercurial repository by ID and callsign over HTTP and SSH.
- Pulled a Subversion repository by ID and callsign over SSH (no HTTP support for SVN).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15302
Summary:
Ref T4245. Make `/diffusion/123/` work, but redirect the user to `/diffusion/XYZ/` if the repository has a callsign.
(Right now, every repository has a callsign, so this always redirects.)
Also redirect `/R123:abcdef` if the repository has a callsign.
Also also, move the Pull garbage collector somewhere more sensible.
Test Plan:
- Added test coverage.
- Visited `/diffusion/1/`, was redirected.
- Visited `/diffusion/R1:abcdef`, was redirected.
- Browsed Diffusion normally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15301
Summary: Ref T4245. Accept identifiers instead of callsigns in these scripts so things continue to work in a future callsign-optional world.
Test Plan: Ran these scripts with both valid and invalid arguments; saw success and errors.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15300
Summary: Ref T10349.
Test Plan:
- Added archived and unarchived project tags to a task.
- Saw unarchived tags, only, on cards.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10349
Differential Revision: https://secure.phabricator.com/D15297
Summary: Ref T4245. This currently accepts only callsigns; prepare it for the bright new callsign-optional world.
Test Plan:
- Ran `./bin/diviner generate --repository 1 --book src/docs/book/flavor.book --clean`, got a good result.
- Ran `./bin/diviner generate --repository 239238 --book src/docs/book/flavor.book --clean`, got an appropraite error about a bad repository identifier.
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15296
Summary: Ref T4245. This has no callers.
Test Plan:
- Ran `git grep -i 'getCallsign('` and visually verified that no callers could reasonably be `DiffusionRequest` objects (there are only 23 remaining sites, and about half are `$this->...` in `PhabricatorRepository`.
- Browsed around directory/file/branch/content/diff/etc pages in Diffusion.
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15295
Summary:
Ref T4245. We pass this exclusively for use by additional third-party hooks.
This is technically a backward compatibility break, but I suspect it doesn't affect anyone:
- Probably almost no one is using this (there are few reasons to, even for the tiny number of installs with custom commit hooks).
- If they are, there's a good chance the PHID will work anyway, since nearly all scripts and Conduit methods will accept it in place of a callsign now, and if it's in logging or debugging code the PHID is a reasonable substitute
- Even if it doesn't just keep working, the break should be very obvious in most reasonable cases.
I'll call this out explicitly in the changelog, though -- almost everything else will just continue working, but this is a strict compatibility break.
Test Plan:
- Ugh.
- Picked a hosted Git repo out of Diffusion.
- Went to the path on disk.
- Went into `hooks/`.
- Went into `pre-receive-phabricator.d/`.
- Wrote this hook and gave it `chmod +x`:
```name=stuff.sh
#!/bin/sh
echo $PHABRICATOR_REPOSITORY >> /tmp/stuff.log
```
- Pushed to the repository.
- Saw a PHID show up in the log:
```
$ cat /tmp/stuff.log
PHID-REPO-bqkcdp47euwnwlasrsrh
```
Reviewers: chad, avivey
Reviewed By: avivey
Subscribers: avivey
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15294
Summary:
Ref T4245. Two effects:
- First, let hooks work for future repositories without callsigns.
- Second, provide a better error when users push directly to hosted repositories.
Test Plan: Ran `bin/commit-hook PHID-REPO-xxx`.
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15293
Summary: Working towards making PHUITwoColumnView into a page layout engine. Adds header support.
Test Plan: Use new header on Profile and Profiles. No visual changes, less duplicated code.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15292
Summary: Attempting to clean PHUIObjectBoxView up a little as well as finally being able to `addClass` on the sucker. I'm running into some issue with `addTabs` though, which on Files isn't firing.
Test Plan: Bounce around tons of screens.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15291
Summary:
Ref T10349. This capability didn't make a ton of sense when you had to be a member to watch a project and watch rules were simple, but makes more sense now.
A particular use case might be finding all the stuff you're watching so you can prune it.
Test Plan: Searched for stuff I was watching, got accurate results.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10349
Differential Revision: https://secure.phabricator.com/D15289
Summary: We're using this a little more, so I'd prefer less copy-pasta and one place to manage the UI. Maybe add a caret?
Test Plan: grep for 'Actions', test Phriction, Diviner, ect, Action Menus.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15288
Summary: Fixes T9562. We already do this for tags, but didn't have similar logic for branches. Implement that logic.
Test Plan:
- Set limit to 1, saw "More branches", clicked it, got the correct results.
- Verified that branch table with no specified commit still works properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9562
Differential Revision: https://secure.phabricator.com/D15284
Summary: Uses the background color changes to show also on the side nav. Places color on entire body so fullscreen doesn't show other body color.
Test Plan: Review various workboard colors at normal and fullscreen
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15283
Summary:
Fixes T10304. In Mercurial, we must enumerate the whole file tree. Currently, we incorrectly count files within directories (which won't be shown) toward the "100 file" limit at top level, so directories with more than 100 subpaths are truncated improperly.
This is approxiately the same as @richardvanvelzen's fix.
Test Plan: Viewed a large Mercurial repository, saw a complete directory listing.
Reviewers: chad
Reviewed By: chad
Subscribers: richardvanvelzen
Maniphest Tasks: T10304
Differential Revision: https://secure.phabricator.com/D15282
