Summary:
Depends on D20381. Ref T8093. This makes minor improvements to the protocol proxy to handle cases where we add, remove, or replace refs and may need to move the "capabilities" section.
Rather than invoking a callback on every ref: parse the whole ref list into a data structure, mutate it if necessary (in a future diff), then dump it back into wire format.
This allows us to shift the capabilities data (which needs to be coupled with the first ref) around if we modify the first ref, and reorder the reflist alphabetically like git does.
When the server has no refs, Git sends no capabilities data. This is easy to emulate, just surprising.
Test Plan:
Tested the cases not covered by D20381:
- Fetching where the fetch actually fetches data.
- `ls-remote` when we hide the first ref (capabilities data properly moves to the first visible ref).
- `ls-remote` when the remote is empty (we just drop the capabilities frame completely).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T8093
Differential Revision: https://secure.phabricator.com/D20436
Summary:
Depends on D20380. Ref T8093. When prototypes are enabled, inject a (hopefully?) no-op proxy into the Git wire protocol.
This proxy decodes "git upload-pack" and allows the list of references to be rewritten, in a similar way to how we already proxy the Subversion protocol to rewrite URIs and proxy the Mercurial protocol to distinguish between read and write operations.
The piece we care about comes at the beginning, and looks like this:
```
<frame-length><ref-hash> <ref-name>\0<server-capabilities>\n
<frame-length><ref-hash> <ref-name>\n
<frame-length><ref-hash> <ref-name>\n
...
<0000>
```
We can add, remove, or modify this section to make it appear that the server has different refs than the refs that exist on disk.
Things I have tried:
- `git ls-remote`
- `git ls-remote` where the server hides some refs.
- `git fetch` where the fetch is a no-op.
Things I have not tried:
- `git fetch` where the fetch is not a no-op.
- Tricking things into doing protocol v2. Or: I tried this, I wasn't successful. In v2, additional "\0" tricks are used to hide data in the capabilities, I think?
- `git ls-remote` where we rewrite/hide the first ref in the list, and need to move the capabilities frame elsewhere.
- `git ls-remote` where the server has no refs at all, or we remove every ref.
So the "interesting" piece of this works, but it almost certainly needs some cleanup to survive interaction with the real world.
Test Plan: See above.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T8093
Differential Revision: https://secure.phabricator.com/D20381
Summary:
Ref T8093. Support dumping the protocol bytes to a side channel logfile, as a precursor to parsing the protocol and rewriting protocol frames to virtualize refs.
The protocol itself is mostly ASCII text so the raw protocol bytes are pretty comprehensible.
Test Plan:
{F6363221}
{F6363222}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T8093
Differential Revision: https://secure.phabricator.com/D20380
Summary:
Depends on D20419. Ref T13277. Fixes T8936. Fixes T9383. Fixes T12300. When you push arbitrary refs to Phabricator, the push log currently complains if those refs are not tags or branches.
Upstream Git now features "notes", and there's no reason to prevent writes to arbitrary refs, particularly beause we plan to start using them soon (see T13278).
Allow these writes as affecting raw refs.
Test Plan:
- Pushed an arbitrary ref.
- Pushed some Git notes.
- Wrote a Herald ref rule, saw "ref" in the dropdown.
{F6376492}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277, T8936, T9383, T12300
Differential Revision: https://secure.phabricator.com/D20420
Summary:
Depends on D20412. See PHI1147.
- Index the targets of "Add Reviewer", "Add Blocking Reviewer", "Add Auditor", "Add Subscriber", and "Remove Subscriber" Herald rules. My major goal is to get Owners packages. This will also hit projects/users, but we just don't read those edges (for now, at least).
- Add a "Related Herald Rules" panel to Owners Package pages.
- Add a migration to reindex Herald rules for the recent build plan stuff and this, now that such a migration is easy to write.
Test Plan:
Ran migration, verified all rules reindexed.
{F6372695}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D20413
Summary:
Fixes T13270. In Diffusion, the "Code" tab is linked in a weird way that isn't consistent with the other tabs.
Particularly, if you navigate to `x/y/z/` and toggle between the "Branches" and "History" tabs (or other tabs), you keep your path. If you click "Code", you lose your path.
Instead, retain the path, so you can navigate somewhere and then toggle to/from the "Code" tab to get different views of the same path.
Test Plan: Browed into a repository, clicked "History", clicked "Code", ended up back in the place I started.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13270
Differential Revision: https://secure.phabricator.com/D20323
Summary:
Depends on D20291. Ref T13259. Move all the simple cases (where paging depends only on the partial object and does not depend on keys) to a simple wrapper.
This leaves a smaller set of more complex cases where we care about external data or which keys were requested that I'll convert in followups.
Test Plan: Poked at things, but a lot of stuff is still broken until everything is converted.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13259
Differential Revision: https://secure.phabricator.com/D20292
Summary:
See PHI1123. The key on this table is `<resource, type, code>` but we currently query for only `<type, code>`. This can't use the key.
Constrain the query to the resource we expect (the repository) so it can use the key.
Test Plan: Pushed files using LFS. See PHI1123 for more, likely.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20261
Summary:
Ref T13121. When you connect to a host with SSH, don't already know the host key, and don't have strict host key checking, it prints "Permanently adding host X to known hosts". This is super un-useful.
In a perfect world, we'd probably always have strict host key checking, but this is a significant barrier to configuration/setup and I think not hugely important (MITM attacks against SSH hosts are hard/rare and probably not hugely valuable). I'd imagine a more realistic long term approach is likely optional host key checking.
For now, try using `LogLevel=ERROR` instead of `LogLevel=quiet` to suppress this error. This should be strictly better (since at least some messages we want to see are ERROR or better), although it may not be perfect (there may be other INFO messages we would still like to see).
Test Plan:
- Ran `ssh -o LogLevel=... -o 'StrictHostKeyChecking=no' -o 'UserKnownHostsFile=/dev/null'` with bad credentials, for "ERROR", "quiet", and default ("INFO") log levels.
- With `INFO`, got a warning about adding the key, then an error about bad credentials (bad: don't want the key warning).
- With `quiet`, got nothing (bad: we want the credential error).
- With `ERROR`, got no warning but did get an error (good!).
Not sure this always gives us exactly what we want, but it seems like an improvement over "quiet".
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13121
Differential Revision: https://secure.phabricator.com/D20240
Summary:
Depends on D20181. Depends on D20182. Fixes T3498. Ref T13161. My claim, at least, is that D20181 can be tweaked to be good enough to throw away this "feature" completely.
I think this feature was sort of a mistake, where the ease of access to `diff -bw` shaped behavior a very long time ago and then the train just ran a long way down the tracks in the same direction.
Test Plan: Grepped for `whitespace`, deleted almost everything. Poked around the UI a bit. I'm expecting the whitespace changes to get some more iteration this week so I not being hugely pedantic about testing this stuff exhaustively.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T3498
Differential Revision: https://secure.phabricator.com/D20185
Summary: Ref T13250. See D20149. In a number of cases, we use `setQueryParams()` immediately after URI construction. To simplify this slightly, let the constructor take parameters, similar to `HTTPSFuture`.
Test Plan: See inlines.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13250
Differential Revision: https://secure.phabricator.com/D20151
Summary: See D20136. This method is sort of inherently bad because it is destructive for some inputs (`x=1&x=2`) and had "PHP-flavored" behavior for other inputs (`x[]=1&x[]=2`). Move to explicit `...AsMap` and `...AsPairList` methods.
Test Plan: Bit of an adventure, see inlines in a minute.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20141
Summary:
Ref T13244. See PHI1055. (Earlier, see D20091 and PHI1047.) Previously, we expanded the Owners package autoreview rules from "Yes/No" to several "Review (Blocking) If Non-Owner Author Not Subscribed via Package" kinds of rules. The sky didn't fall and this feature didn't turn into "Herald-in-Owners", so I'm comfortable doing something similar to the "Audit" rules.
PHI1055 is a request for a way to configure slightly different audit behavior, and expanding the options seems like a good approach to satisfy the use case.
Prepare to add more options by moving everything into a class that defines all the behavior of different states, and converting the "0/1" boolean column to a text column.
Test Plan:
- Created several packages, some with and some without auditing.
- Inspected database for: package state; and associated transactions.
- Ran the migrations.
- Inspected database to confirm that state and transactions migrated correctly.
- Reviewed transaction logs.
- Created and edited packages and audit state.
- Viewed the "Package List" element in Diffusion.
- Pulled package information with `owners.search`, got sensible results.
- Edited package audit status with `owners.edit`.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13244
Differential Revision: https://secure.phabricator.com/D20124
Summary:
Ref T13244. See PHI1057. Currently, if you're a member of a lot of projects/packages, you can end up with a very large `commit.authorPHID IN (...)` clause in part of the "Active Audits" query, since your `alice` token in "Responsible Users: alice" expands into every package and project you can audit on behalf of.
It's impossible for a commit to be authored by anything but a user, and evidence in PHI1057 suggests this giant `IN (...)` list can prevent MySQL from making effective utilization of the `<authorPHID, auditStatus, ...>` key on the table.
Prefilter the list of PHIDs to only PHIDs which can possibly author a commit.
(We'll also eventually need to convert the `authorPHIDs` into `identityPHIDs` anyway, for T12164, and this moves us slightly toward that.)
Test Plan: Loaded "Active Audits" before and after change, saw a more streamlined and sensible `authorPHID IN (...)` clause afterwards.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13244
Differential Revision: https://secure.phabricator.com/D20129
Summary:
Fixes T13192. See PHI1015. When you deactivate a repository, we currently stop serving it.
This creates a problem for intracluster sync, since new nodes can't sync it. If nothing else, this means that if you "ship of theseus" your cluster and turn nodes over one at a time, you will eventually lose the entire repository. Since that's clearly a bad outcome, support sync.
Test Plan:
Testing this requires a "real" cluster, so I mostly used `secure`.
I deactivated rGITTEST and ran this on `secure002`:
```
./bin/repository thaw --demote secure002.phacility.net --force GITTEST && ./bin/repository update GITTEST
```
Before the patch, this failed:
```
[2019-01-31 19:40:37] EXCEPTION: (CommandException) Command failed with error #128!
COMMAND
git fetch --prune -- 'ssh://172.30.0.64:22/diffusion/GITTEST/' '+refs/*:refs/*'
STDOUT
(empty)
STDERR
Warning: Permanently added '172.30.0.64' (RSA) to the list of known hosts.
phabricator-ssh-exec: This repository ("rGITTEST") is not available over SSH.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
```
After applying (a similar patch to) this patch to `secure001`, the sync worked.
I'll repeat this test with the actual patch once this deploys to `secure`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13192
Differential Revision: https://secure.phabricator.com/D20077
Summary: Now that we have a nice function for this, use it to simplify some code.
Test Plan: Ran through the Duo enroll workflow to make sure signing still works.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20053
Summary:
Ref T13242. See <https://discourse.phabricator-community.org/t/out-of-range-value-for-column-deviceversion/2218>.
The synchronization log column is `uint32?` and `-1` doesn't go into that column.
Since we're only using `-1` for convenience to cheat through `$max_version > $this_version` checks, use `null` instead and make the checks more explicit.
Test Plan: Reproducing this is a bit tricky and I cheated fairly heavily to force the code down this pathway without actually building a multi-device cluster, but I did reproduce the original exception, apply the patch, and observe that it fixed things.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13242
Differential Revision: https://secure.phabricator.com/D20047
Summary:
In ~2012, the first of these options was added because someone who hates dogs and works at Asana also hated `[Differential]` in the subject line. The use case there was actually //removing// the text, not changing it, but I made the prefix editable since it seemed like slightly less of a one-off.
These options are among the dumbest and most useless config options we have and very rarely used, see T11760. A very small number of instances have configured one of these options.
Newer applications stopped providing these options and no one has complained.
You can get the same effect with `translation.override`. Although I'm not sure we'll keep that around forever, it's a reasonable replacement today. I'll call out an example in the changelog to help installs that want to preserve this option.
If we did want to provide this, it should just be in {nav Applications > Settings} for each application, but I think it's wildly-low-value and "hack via translations" or "local patch" are entirely reasonable if you really want to change these strings.
Test Plan: Grepped for `subject-prefix`.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19993
Summary:
See PHI1014. We may not have Identities if you race the import pipeline, or in some other cases which are more "bug" / "missing migration"-flavored.
Load the commit data so we can fall back to it if we don't have identities.
Test Plan:
- Wiped out all my identities with `UPDATE ... SET authorIdentityPHID = NULL WHERE ...`.
- Before change: blame fataled with `Attempting to access attached data on PhabricatorRepositoryCommit (via getCommitData()), but the data is not actually attached.`.
- After change: blame falls back gracefully.
- Restored identities with `bin/repository rebuild-identities`, checked blame again.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19958
Summary:
Depends on D19914. Ref T11351. Some of the Phoilo rabbit holes go very deep.
`PhabricatorApplicationTransactionInterface` currently requires you to implement `willRenderTimeline()`. Almost every object just implements this as `return $timeline`; only Pholio, Diffusion, and Differential specialize it. In all cases, they are specializing it mostly to render inline comments.
The actual implementations are a bit of a weird mess and the way the data is threaded through the call stack is weird and not very modern.
Try to clean this up:
- Stop requiring `willRenderTimeline()` to be implemented.
- Stop requiring `getApplicationTransactionViewObject()` to be implemented (only the three above, plus Legalpad, implement this, and Legalpad's implementation is a no-op). These two methods are inherently pretty coupled for almost any reasonable thing you might want to do with the timeline.
- Simplify the handling of "renderdata" and call it "View Data". This is additional information about the current view of the transaction timeline that is required to render it correctly. This is only used in Differential, to decide if we can link an inline comment to an anchor on the same page or should link it to another page. We could perhaps do this on the client instead, but having this data doesn't seem inherently bad to me.
- If objects want to customize timeline rendering, they now implement `PhabricatorTimelineInterface` and provide a `TimelineEngine` which gets a nice formal stack.
This leaves a lot of empty `willRenderTimeline()` implementations hanging around. I'll remove these in the next change, it's just going to be deleting a couple dozen copies of an identical empty method implementation.
Test Plan:
- Viewed audits, revisions, and mocks with inline comments.
- Used "Show Older" to page a revision back in history (this is relevant for "View Data").
- Grepped for symbols: willRenderTimeline, getApplicationTransactionViewObject, Legalpad classes.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11351
Differential Revision: https://secure.phabricator.com/D19918
Summary:
Ref T13217. See <https://discourse.phabricator-community.org/t/unsafe-raw-string-warnings-while-importing-git-commits/2191>.
Hunt down and fix two more `qsprintf()` things.
I just converted the "performance optimization" into a normal, safe call since we're dealing with far less SVN stuff nowadays and the actual issue has been lost in the mists of time. If it resurfaces, we can take another look.
Test Plan: Imported some commits, no longer saw these warnings in the daemon logs.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13217
Differential Revision: https://secure.phabricator.com/D19869
Summary:
Ref T13222. See PHI995. Before making a change to inline rendering, consolidate this code for generating the "alice added inlines comments." and "alice marked X inlines as done." transactions.
Both Differential and Diffusion have four very similar chunks of code. Merge them into shared methods and reduce code duplication across the methods.
(In the next change, I plan to hide the "done" story when the mark affects your own inline, since users marking their own inlines as "done" is generally not very interesting or useful.)
Test Plan: As author and reviewer/auditor, added inlines in Differential and Diffusion. As author, marked own and others inlines as done and undone. Got sensible transaction rendering and persistence of "Done".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19858
Summary: Depends on D19856. Ref T13222. See D19829. Make access to "Track Only" slightly cleaner and more consistent..
Test Plan: Set, edited, and removed "Track Only" settings for a repository. Saw sensible persistence and display behaviors.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19857
Summary:
Ref T13222. See D19829. We're inconsistent about using `getDetail()/setDetail()` to do some ad-hoc reads. Put this stuff in proper accessor methods.
Also a couple of text fixes from D19850.
Test Plan: Set, edited, and removed autoclose branches from a repository. Got sensible persistence and rendering behavior.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19856
Summary:
See <https://discourse.phabricator-community.org/t/cannot-accept-commits-in-audit/2166/>.
In D19842, I changed `PhabricatorEditField->shouldGenerateTransactionsFromComment()`.
- Previously, it bailed on `getIsConduitOnly()`.
- After the patch, it bails on a missing `getCommentActionLabel()`.
The old code was actually wrong, and it was previously possible to apply possibly-invalid actions in some cases (or, at least, sneak them through this layer: they would only actually apply if not validated properly).
In practice, it let a different bug through: we sometimes loaded commits without loading their audit authority, so testing whether the viewer could "Accept" the commit or not (or take some other actions like "Raise Concern") would always fail and throw an exception: "Trying to access data not attached to this object..."
Fixing the insufficiently-strict transaction generation code exposed the "authority not attached" bug, which caused some actions to fail to generate transactions.
This appeared in the UI as either an unhelpful error ("You can't post an empty comment") or an action with no effect. The unhelpful error was because we show that error if you aren't taking any //other// actions, and we wouldn't generate an "Accept" action because of the interaction of these bugs, so the code thought you were just posting an empty comment.
Test Plan: Without leaving comments, accepted and rejected commits. No more error messages, and actions took effect.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: stephan.senkbeil, hskiba
Differential Revision: https://secure.phabricator.com/D19845
Summary:
Depends on D19831. Ref T13216. See PHI908. Allegedly, a user copied a large repository into itself and then pushed it. Great backup strategy, but it can create headaches for administrators.
Allow a "maximum paths you can touch with one commit" limit to be configured, to make it harder for users to make this push this kind of commit by accident.
If you actually intended to do this, you can work around this by breaking your commit into pieces (or temporarily removing the limit). This isn't a security/policy sort of option, it's just a guard against silly mistakes.
Test Plan: Set limit to 2, tried to push 3 files, got rejected. Raised limit, pushed changes successfully.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19839
Summary: Depends on D19830. Ref T13216. See PHI908. See PHI750. See PHI885. Allow users to configure a filesize limit, and allow them to adjust the clone/fetch timeout.
Test Plan:
{F6021356}
- Configured a filesize limit and pushed, hit it. Made the limit larger and pushed, change went through.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19831
Summary:
Depends on D19829. Ref T13216. See PHI908. The current implementation is kind of a lot to live in `CommitHookEngine` and will likely fail if `git diff-tree` produces more than 2GB of output.
Pull it out and make it slightly more robust against enormous commits. It's probably limited by this, now:
```
implode("\n", $every_path)
```
We could replace that with some `PhutilReverseRopeSource` primitive or something but since we don't have one of those and it seems unlikely that we'll hit this case in practice, I left it here for now with just the easy stuff converted to be stream-oriented.
Test Plan:
Used this script to test the query against various commits, got good results:
```
<?php
require_once 'scripts/init/init-script.php';
$viewer = PhabricatorUser::getOmnipotentUser();
$repository = id(new PhabricatorRepositoryQuery())
->setViewer($viewer)
->withCallsigns(array('P'))
->executeOne();
var_dump(
id(new DiffusionLowLevelFilesizeQuery())
->setRepository($repository)
->withIdentifier($argv[1])
->execute());
```
Used this to find large commits in history and pull filesizes (worked great, although our largest commit only touches a couple thousand paths):
```
for hash in `git log --format=%H`; do echo -n $hash; echo -n ' '; git diff-tree -r --no-commit-id $hash | wc -l | awk '{print $1}'; done | awk '{print $2 " " $1}' | sort -n
```
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19830
Summary: Depends on D19826. Ref T13216. We have a fair number of options here; add some groups so the "Build" stuff can go in a little subcategory and such.
Test Plan: {F6020896}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19827
Summary:
Ref T13222. See PHI683. Currently, you can "Change subtype..." via Conduit and the bulk editor, but not via the comment action stack or edit forms.
In PHI683 an install is doing this often enough that they'd like it to become a first-class action. I've generally been cautious about pushing this action to become a first-class action (there are some inevitable rough edges and I don't want to add too much complexity if there isn't a use case for it) but since we have evidence that users would find it useful and nothing has exploded yet, I'm comfortable taking another step forward.
Currently, `EditEngine` has this sort of weird `setIsConduitOnly()` method. This actually means more like "this doesn't show up on forms". Make it better align with that. In particular, a "conduit only" field can already show up in the bulk editor, which is goofy. Change this to `setIsFormField()` and convert/simplify existing callsites.
Test Plan:
There are a lot of ways to reach EditEngine so this probably isn't entirely exhaustive, but I think I got pretty much anything which is likely to break:
- Searched for `setIsConduitOnly()` and `getIsConduitOnly()`, converted all callsites to `setIsFormField()`.
- Searched for `setIsLockable()`, `setIsReorderable()` and `setIsDefaultable()` and aligned these calls to intent where applicable.
- Created an Almanac binding.
- Edited an Almanac binding.
- Created an Almanac service.
- Edited an Almanac service.
- Edited a binding property.
- Deleted a binding property.
- Created and edited a badge.
- Awarded and revoked a badge.
- Created and edited an event.
- Made an event recurring.
- Created and edited a Conpherence thread.
- Edited and updated the diff for a revision.
- Created and edited a repository.
- Created and disabled repository URIs.
- Created and edited a blueprint.
- Created and edited tasks.
- Created a paste, edited/archived a paste.
- Created/edited/archived a package.
- Created/edited a project.
- Made comments.
- Moved tasks on workboards via comment action stack.
- Changed task subtype via comment action stack.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19842
Summary:
Ref T13216. I want to add some new management options to repositories (e.g., filesize limit, clone timeouts). Before adding new stuff here, update the UI to a full-width, Phortune-style UI.
This partially reverts D18523. About a year ago, several UIs got converted to fixed-width (repository management, config, settings, instance management in SAAS). I didn't think these were good changes and have never really gotten used to them. The rationale wasn't clear to me and these changes just felt like "be more like GitHub". I think usability is significantly worse, e.g. actions are now hidden inside button menus instead of immediately visible.
Phortune also got converted less dramatically to a full-width-with-menu UI, which I like much better. Adjust repository management to use that UI style instead of the fixed-width style.
Test Plan:
{F6020884}
Viewed every panel, including the Subversion panel.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19826
Summary:
Depends on D19816. Ref T13216. See PHI908. See PHI750. In a few cases, users have pushed multi-gigabyte files full of various things that probably shouldn't be version controlled. This tends to create various headaches.
Add support for limiting the maximum size of any object. Specifically, we:
- list all the objects each commit touches;
- check their size after the commit applies;
- if it's over the limit, reject the commit.
This change doesn't actually hook the limit up (the limit is always "0", i.e. unlimited), and doesn't have Mercurial or SVN support. The actual parser bit would probably be better in some other `Query/Parser` class eventually, too. But it at least roughly works.
Test Plan:
Changed the hard-coded limit to other values, tried to push stuff, got sensible results:
```
$ echo pew >> magic_missile.txt && git commit -am pew && git push
[master 98d07af] pew
1 file changed, 1 insertion(+)
# Push received by "local.phacility.net", forwarding to cluster host.
# Acquiring write lock for repository "spellbook"...
# Acquired write lock immediately.
# Acquiring read lock for repository "spellbook" on device "local.phacility.net"...
# Acquired read lock immediately.
# Device "local.phacility.net" is already a cluster leader and does not need to be synchronized.
# Ready to receive on cluster host "local.phacility.net".
Counting objects: 49, done.
Delta compression using up to 8 threads.
Compressing objects: 100% (48/48), done.
Writing objects: 100% (49/49), 3.44 KiB | 1.72 MiB/s, done.
Total 49 (delta 30), reused 0 (delta 0)
remote: +---------------------------------------------------------------+
remote: | * * * PUSH REJECTED BY EVIL DRAGON BUREAUCRATS * * * |
remote: +---------------------------------------------------------------+
remote: \
remote: \ ^ /^
remote: \ / \ // \
remote: \ |\___/| / \// .\
remote: \ /V V \__ / // | \ \ *----*
remote: / / \/_/ // | \ \ \ |
remote: @___@` \/_ // | \ \ \/\ \
remote: 0/0/| \/_ // | \ \ \ \
remote: 0/0/0/0/| \/// | \ \ | |
remote: 0/0/0/0/0/_|_ / ( // | \ _\ | /
remote: 0/0/0/0/0/0/`/,_ _ _/ ) ; -. | _ _\.-~ / /
remote: ,-} _ *-.|.-~-. .~ ~
remote: * \__/ `/\ / ~-. _ .-~ /
remote: \____(Oo) *. } { /
remote: ( (..) .----~-.\ \-` .~
remote: //___\\ \ DENIED! ///.----..< \ _ -~
remote: // \\ ///-._ _ _ _ _ _ _{^ - - - - ~
remote:
remote:
remote: OVERSIZED FILE
remote: This repository ("spellbook") is configured with a maximum individual file size limit, but you are pushing a change ("98d07af863e799509e7c3a639404d216f9fc79c7") which causes the size of a file ("magic_missile.txt") to exceed the limit. The commit makes the file 317 bytes long, but the limit for this repository is 1 bytes.
remote:
# Released cluster write lock.
To ssh://local.phacility.com/source/spellbook.git
! [remote rejected] master -> master (pre-receive hook declined)
error: failed to push some refs to 'ssh://epriestley@local.phacility.com/source/spellbook.git'
```
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: joshuaspence
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19817
Summary:
Ref T13216. See PHI943. When you have a large number of cluster bindings for a repository, the UI sorting can be a bit hard to manage.
One install that regularly cycles repository cluster devices had a couple dozen older disabled bindings, with the enabled bindings intermingled.
Sort the UI:
- enabled devices come first;
- in each group, sort by name.
Test Plan: Mixed disabled/enabled bindings, loaded {nav Diffusion > Repository > Storage} page with clustering configured. Before: relatively unhelpful sort order. After: more intuitive sort order.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19813
Summary:
Depends on D19814. Ref T13216. See PHI885. For various eldritch reasons, `git fetch` can hang. Although we'd probably like to fix this with `git fetch --require-sustained-network-transfer-rate=512KB/5s` or similar, that flag doesn't exist and we don't have a reasonable way to build it.
Short of that, move toward formalizing a repository "copy time limit": the longest amount of time anything may spend trying to make a copy of this repository.
This grows out of the existing intracluster sync limit, which is effectively the same thing. Here, apply it to `git clone` and `git fetch` in Drydock working copy construction, too. A future change may make it configurable.
Test Plan:
- Set the limit to 0.001.
- Tried to build and lease working copies, got sensible timeout errors (see D19815).
```
<Activation Failed> Lease activation failed: [CommandException] Command killed by timeout after running for more than 0.001 seconds.
COMMAND
ssh '-o' 'LogLevel=quiet' '-o' 'StrictHostKeyChecking=no' '-o' 'UserKnownHostsFile=/dev/null' '-o' 'BatchMode=yes' -l '********' -p '2222' -i '********' '127.0.0.1' -- '(cd '\''/var/drydock/workingcopy-163/repo/spellbook/'\'' && git clean -d --force && git fetch && git reset --hard)'
```
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19816
Summary: Depends on D19810. Ref T13217. Ref T13216. I mostly used `grep implode | grep OR` and `grep implode | grep AND` to find these -- not totally exhaustive but should be a big chunk of the callsites that are missing `%LO` / `%LA`.
Test Plan:
These are tricky to test exhaustively, but I made an attempt to hit most of them:
- Browsed Almanac interfaces.
- Created/browsed Calendar events.
- Enabled/disabled/showed the lock log.
- Browsed repositories.
- Loaded Facts UI.
- Poked at Multimeter.
- Used typeahead for users and projects.
- Browsed Phriction.
- Ran various fulltext searches.
Not sure these are reachable:
- All the lint stuff might be dead/unreachable/nonfunctional?
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13217, T13216
Differential Revision: https://secure.phabricator.com/D19814
Summary:
Ref T13216. Ref T13217. Depends on D19800. This fixes all of the remaining query warnings that pop up when you run "arc unit --everything".
There's likely still quite a bit of stuff lurking around, but hopefully this covers a big set of the most common queries.
Test Plan: Ran `arc unit --everything`. Before change: lots of query warnings. After change: no query warnings.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13217, T13216
Differential Revision: https://secure.phabricator.com/D19801
Summary: Depends on D19785. Ref T13217. This converts many of the most common clause construction pathways to the new %Q / %LQ / %LO / %LA / %LJ semantics.
Test Plan: Browsed around a bunch, saw fewer warnings and no obvious behavioral errors. The transformations here are generally mechanical (although I did them by hand).
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: hach-que
Maniphest Tasks: T13217
Differential Revision: https://secure.phabricator.com/D19789
Summary:
See PHI958. Ref T13210. Previously, see PHI720.
The use case for the magic in PHI720 involves multiple patterns, and no parameter can be passed to `branch` that will result in multiple patterns being passed to `git`.
Replace the implicit magic with an explicit `patterns` parameter.
This whole thing is a bit shaky but probably isn't hurting anything.
Test Plan:
- Ran query with no `patterns`.
- Ran query with invalid `patterns`, got readable error.
- Ran query with various valid `patterns` (plain branch name, globs with "?" and "*"), got sensible results.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13210
Differential Revision: https://secure.phabricator.com/D19771
Summary:
Ref T13217. This method is slightly tricky:
- We can't safely return a string: return an array instead.
- It no longer makes sense to accept glue. All callers use `', '` as glue anyway, so hard-code that.
Then convert all callsites.
Test Plan: Browsed around, saw fewer "unsafe" errors in error log.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13217
Differential Revision: https://secure.phabricator.com/D19784
Summary: Depends on D19798. Ref T13216. This puts at least a basic UI on top of sync logs.
Test Plan:
Viewed logs from the web UI and exported data. Note that these syncs are somewhat simulated since I my local cluster is somewhat-faked (i.e., not actually multiple machines).
{F5995899}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19799
Summary:
Depends on D19797. Ref T13216.
- Put the new `hookWait` in the export and the UI.
- Put the existing waits in the UI, not just the export.
- Make order consistent: host, write, read, hook (this is the order the timers start in).
Test Plan: Pushed some stuff, viewed web UI and saw sensible numbers, exported data and got the same values.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19798
Summary: Depends on D19796. Simplify some timing code by using phutil_microseconds_since() instead of duplicate casting and arithmetic.
Test Plan: Grepped for `1000000` to find these. Pulled, pushed, made a conduit call. This isn't exhaustive but it should be hard for these to break in a bad way since they're all just diagnostic.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19797
Summary:
Depends on D19779. Ref T13216. The push logs currently record the "hostWait", which is roughly "locking + subprocess cost". We also record locking separately, so we can figure out "subprocess cost" alone by subtracting the lock costs.
However, the subprocess (normally `git receive-pack`) runs hooks, and we don't have an easy way to figure out how much time was spent doing actual `git` stuff vs spent doing commit hook processing. This would have been useful in diagnosing at least one recent issue.
Track at least a rough hook cost and record it in the push logs.
Test Plan: Pushed to a repository, saw a reasonable hook cost appear in the database table.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19780
Summary:
Depends on D19778. Ref T13216. See PHI943, PHI889, et al.
We currently have a push log and a pull log, but do not separately log intracluster synchronization events. We've encountered several specific cases where having this kind of log would be helpful:
- In PHI943, an install was accidentally aborting locks early. Having timing information in the sync log would let us identify this more quickly.
- In PHI889, an install hit an issue with `MaxStartups` configuration in `sshd`. A log would let us identify when this is an issue.
- In PHI889, I floated a "push the linux kernel + fetch timeout" theory. A sync log would let us see sync/fetch timeouts to confirm this being a problem in practice.
- A sync log will help us assess, develop, test, and monitor intracluster routing sync changes (likely those in T13211) in the future.
Some of these events are present in the pull log already, but only if they make it as far as running a `git upload-pack` subprocess (not the case with `MaxStartups` problems) -- and they can't record end-to-end timing.
No UI yet, I'll add that in a future change.
Test Plan:
- Forced all operations to synchronize by adding `|| true` to the version check.
- Pulled, got a sync log in the database.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19779
