Summary:
Fixes T5509. Currently, existing sessions live on even if you change your password.
Over the course of the program, we've recieved a lot of HackerOne reports that sessions do not terminate when users change their passwords. I hold that this isn't a security vulnerability: users can explicitly manage sessions, and this is more general and more powerful than tying session termination to password resets. In particular, many installs do not use a password provider at all (and no researcher has reported this in a general, application-aware way that discusses multiple authentication providers).
That said, dealing with these false positives is vaguely time consuming, and the "expected" behavior isn't bad for users, so just align behavior with researcher expectations: when passwords are changed, providers are removed, or multi-factor authentication is added to an account, terminate all other active login sessions.
Test Plan:
- Using two browsers, established multiple login sessions.
- In one browser, changed account password. Saw session terminate and logout in the second browser.
- In one browser, removed an authentication provider. Saw session terminate and logout in the second browser.
- In one browser, added MFA. Saw session terminate and logout in the second browser.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5509
Differential Revision: https://secure.phabricator.com/D10135
Summary:
Fixes T5506. Depends on D10133. When users remove an email address or change their primary email address, invalidate any outstanding password reset links.
This is a very small security risk, but the current behavior is somewhat surprising, and an attacker could sit on a reset link for up to 24 hours and then use it to re-compromise an account.
Test Plan:
- Changed primary address and removed addreses.
- Verified these actions invalidated outstanding one-time login temporary tokens.
- Tried to use revoked reset links.
- Revoked normally from new UI panel.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5506
Differential Revision: https://secure.phabricator.com/D10134
Summary:
Ref T5506. This makes it easier to understand and manage temporary tokens.
Eventually this could be more user-friendly, since it's relatively difficult to understand what this screen means. My short-term goal is just to make the next change easier to implement and test.
The next diff will close a small security weakness: if you change your email address, password reset links which were sent to the old address are still valid. Although an attacker would need substantial access to exploit this (essentially, it would just make it easier for them to re-compromise an already compromised account), it's a bit surprising. In the next diff, email address changes will invalidate outstanding password reset links.
Test Plan:
- Viewed outstanding tokens.
- Added tokens to the list by making "Forgot your password?" requests.
- Revoked tokens individually.
- Revoked all tokens.
- Tried to use a revoked token.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5506
Differential Revision: https://secure.phabricator.com/D10133
Summary: Provide an implementation for the `getName` method rather than automagically determining the application name.
Test Plan: Saw reasonable application names in the launcher.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10027
Summary: Ref T5655. Some discussion in D9839. Generally speaking, `Phabricator{$name}Application` is clearer than `PhabricatorApplication{$name}`.
Test Plan:
# Pinned and uninstalled some applications.
# Applied patch and performed migrations.
# Verified that the pinned applications were still pinned and that the uninstalled applications were still uninstalled.
# Performed a sanity check on the database contents.
Reviewers: btrahan, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: hach-que, epriestley, Korvin
Maniphest Tasks: T5655
Differential Revision: https://secure.phabricator.com/D9982
Summary: These have been moved into libphutil.
Test Plan: Browsed Phabricator, didn't see a crash.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9907
Summary:
Fixes T3732. Ref T1205. Ref T3116.
External accounts (like emails used as identities, Facebook accounts, LDAP accounts, etc.) are stored in "ExternalAccount" objects.
Currently, we have a very restrictive `CAN_VIEW` policy for ExternalAccounts, to add an extra layer of protection to make sure users can't use them in unintended ways. For example, it would be bad if a user could link their Phabricator account to a Facebook account without proper authentication. All of the controllers which do sensitive things have checks anyway, but a restrictive CAN_VIEW provided an extra layer of protection. Se T3116 for some discussion.
However, this means that when grey/external users take actions (via email, or via applications like Legalpad) other users can't load the account handles and can't see anything about the actor (they just see "Restricted External Account" or similar).
Balancing these concerns is mostly about not making a huge mess while doing it. This seems like a reasonable approach:
- Add `CAN_EDIT` on these objects.
- Make that very restricted, but open up `CAN_VIEW`.
- Require `CAN_EDIT` any time we're going to do something authentication/identity related.
This is slightly easier to get wrong (forget CAN_EDIT) than other approaches, but pretty simple, and we always have extra checks in place anyway -- this is just a safety net.
I'm not quite sure how we should identify external accounts, so for now we're just rendering "Email User" or similar -- clearly not a bug, but not identifying. We can figure out what to render in the long term elsewhere.
Test Plan:
- Viewed external accounts.
- Linked an external account.
- Refreshed an external account.
- Edited profile picture.
- Viewed sessions panel.
- Published a bunch of stuff to Asana/JIRA.
- Legalpad signature page now shows external accounts.
{F171595}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3732, T1205, T3116
Differential Revision: https://secure.phabricator.com/D9767
Summary: Fixes T5449. Keys are in the form `<type> <key> <comments>`, where comments are optional and can have spaces.
Test Plan:
Tried these invalid keys:
- Empty.
- One part.
- Invalid type.
Tried these valid keys:
- No comment.
- Normal comment.
- Comment with spaces.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5449
Differential Revision: https://secure.phabricator.com/D9701
Summary: Fixes T5386, adds a base set of email preferences to Pholio
Test Plan: Turned on, tested and got email, turned off, tested and saw notifications.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5386
Differential Revision: https://secure.phabricator.com/D9644
Summary: Applied some more linter fixes that I previously missed because my global `arc` install was out-of-date.
Test Plan: Will run `arc unit` on another host.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9443
Summary: Ran `arc lint --apply-patches --everything` over rP, mainly to change double quotes to single quotes where appropriate. These changes also validate that the `ArcanistXHPASTLinter::LINT_DOUBLE_QUOTE` rule is working as expected.
Test Plan: Eyeballed it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9431
Summary: This went smoother than expeced. Makes the rounded Card the default, also tweaked selected state a little.
Test Plan:
Test UIExamples, Maniphest, Home, Differential, Harbormaster, Audit. Everything seems normal
{F163971}
{F163973}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9408
Summary: This makes setStackble play well in ObjectBox, also tweaks dragging in a stackable box (pinning)
Test Plan: Drag in App Settings, Drag in Maniphest, Workboards
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9413
Summary: Ref T5089. Adds a `security.require-multi-factor-auth` which forces all users to enroll in MFA before they can use their accounts.
Test Plan:
Config:
{F159750}
Roadblock:
{F159748}
After configuration:
{F159749}
- Required MFA, got roadblocked, added MFA, got unblocked.
- Removed MFA, got blocked again.
- Used `bin/auth strip` to strip MFA, got blocked.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5089
Differential Revision: https://secure.phabricator.com/D9285
Summary:
This does some backend cleanup of the tile stuff, and some general cleanup of other application things:
- Users who haven't customized preferences get a small, specific set of pinned applications: Differential, Maniphest, Diffusion, Audit, Phriction, Projects (and, for administrators, Auth, Config and People).
- Old tile size methods are replaced with `isPinnnedByDefault()`.
- Shortened some short descriptions.
- `shouldAppearInLaunchView()` replaced by less ambiguous `isLaunchable()`.
- Added a marker for third-party / extension applications.
Test Plan: Faked away my preferences and viewed the home page, saw a smaller set of default pins.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9358
Summary:
Ref T5176. This paves the way for the redesign by making the homepage editor thing a little more manageable/coherent.
Not perfect, but we can clean it up a bit after the new design.
Test Plan:
Home page:
{F162093}
New "Pinned Applications" settings panel (this supports drag-and-drop to reorder):
{F162094}
Pin an app:
{F162095}
Unpin an app:
{F162096}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5176
Differential Revision: https://secure.phabricator.com/D9332
Summary:
This probably needs some tweaks, but the idea is to make it easier to browse and access applications without necessarily needing them to be on the homepage.
Open to feedback.
Test Plan:
(This screenshot merges "Organization", "Communication" and "Core" into a single "Core" group. We can't actually do this yet because it wrecks the homepage.)
{F160052}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5176
Differential Revision: https://secure.phabricator.com/D9297
Summary:
Ref T4398. This code hadn't been touched in a while and had a few crufty bits.
**One Time Resets**: Currently, password reset (and similar links) are valid for about 48 hours, but we always use one token to generate them (it's bound to the account). This isn't horrible, but it could be better, and it produces a lot of false positives on HackerOne.
Instead, use TemporaryTokens to make each link one-time only and good for no more than 24 hours.
**Coupling of Email Verification and One-Time Login**: Currently, one-time login links ("password reset links") are tightly bound to an email address, and using a link verifies that email address.
This is convenient for "Welcome" emails, so the user doesn't need to go through two rounds of checking email in order to login, then very their email, then actually get access to Phabricator.
However, for other types of these links (like those generated by `bin/auth recover`) there's no need to do any email verification.
Instead, make the email verification part optional, and use it on welcome links but not other types of links.
**Message Customization**: These links can come out of several workflows: welcome, password reset, username change, or `bin/auth recover`. Add a hint to the URI so the text on the page can be customized a bit to help users through the workflow.
**Reset Emails Going to Main Account Email**: Previously, we would send password reset email to the user's primary account email. However, since we verify email coming from reset links this isn't correct and could allow a user to verify an email without actually controlling it.
Since the user needs a real account in the first place this does not seem useful on its own, but might be a component in some other attack. The user might also no longer have access to their primary account, in which case this wouldn't be wrong, but would not be very useful.
Mitigate this in two ways:
- First, send to the actual email address the user entered, not the primary account email address.
- Second, don't let these links verify emails: they're just login links. This primarily makes it more difficult for an attacker to add someone else's email to their account, send them a reset link, get them to login and implicitly verify the email by not reading very carefully, and then figure out something interesting to do (there's currently no followup attack here, but allowing this does seem undesirable).
**Password Reset Without Old Password**: After a user logs in via email, we send them to the password settings panel (if passwords are enabled) with a code that lets them set a new password without knowing the old one.
Previously, this code was static and based on the email address. Instead, issue a one-time code.
**Jump Into Hisec**: Normally, when a user who has multi-factor auth on their account logs in, we prompt them for factors but don't put them in high security. You usually don't want to go do high-security stuff immediately after login, and it would be confusing and annoying if normal logins gave you a "YOU ARE IN HIGH SECURITY" alert bubble.
However, if we're taking you to the password reset screen, we //do// want to put the user in high security, since that screen requires high security. If we don't do this, the user gets two factor prompts in a row.
To accomplish this, we set a cookie when we know we're sending the user into a high security workflow. This cookie makes login finalization upgrade all the way from "partial" to "high security", instead of stopping halfway at "normal". This is safe because the user has just passed a factor check; the only reason we don't normally do this is to reduce annoyance.
**Some UI Cleanup**: Some of this was using really old UI. Modernize it a bit.
Test Plan:
- **One Time Resets**
- Used a reset link.
- Tried to reuse a reset link, got denied.
- Verified each link is different.
- **Coupling of Email Verification and One-Time Login**
- Verified that `bin/auth`, password reset, and username change links do not have an email verifying URI component.
- Tried to tack one on, got denied.
- Used the welcome email link to login + verify.
- Tried to mutate the URI to not verify, or verify something else: got denied.
- **Message Customization**
- Viewed messages on the different workflows. They seemed OK.
- **Reset Emails Going to Main Account Email**
- Sent password reset email to non-primary email.
- Received email at specified address.
- Verified it does not verify the address.
- **Password Reset Without Old Password**
- Reset password without knowledge of old one after email reset.
- Tried to do that without a key, got denied.
- Tried to reuse a key, got denied.
- **Jump Into Hisec**
- Logged in with MFA user, got factor'd, jumped directly into hisec.
- Logged in with non-MFA user, no factors, normal password reset.
- **Some UI Cleanup**
- Viewed new UI.
- **Misc**
- Created accounts, logged in with welcome link, got verified.
- Changed a username, used link to log back in.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D9252
Summary:
Ref T4986. Swap this in. Two minor notes:
- I adjusted the SearchEngine to add an additional constraint when the viewer isn't an admin. This mostly stops us from doing a bunch of unnecessary work.
- I fixed the settings panel to paginate (currently loads all results, slow in production).
Test Plan: Viewed logs; viewed settings panel; created a dashboard panel.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4986
Differential Revision: https://secure.phabricator.com/D9136
Summary: Did a more exhaustive grep on setIcon and found 99.9% of the icons.
Test Plan: I verified icon names on UIExamples, but unable to test some of the more complex flows visually. Mostly a read and replace.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9088
Summary: The removes the sprite sheet 'icons' and replaces it with FontAwesome fonts.
Test Plan:
- Grep for SPRITE_ICONS and replace
- Grep for sprite-icons and replace
- Grep for PhabricatorActionList and choose all new icons
- Grep for Crumbs and fix icons
- Test/Replace PHUIList Icon support
- Test/Replace ObjectList Icon support (foot, epoch, etc)
- Browse as many pages as I could get to
- Remove sprite-icons and move remarkup to own sheet
- Review this diff in Differential
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9052
Summary: Ref T4398. This has a few lies (in the sense of "features that don't work yet") but should describe behavior accurately after a few more patches.
Test Plan: Read it.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8910
Summary:
Ref T4843. This adds support to `javelin_tag()` for an `aural` attribute. When specified, `true` values mean "this content is aural-only", while `false` values mean "this content is not aural".
- I've attempted to find the best modern approaches for marking this content, but the `aural` attribute should let us change the mechanism later.
- Make the "beta" markers on application navigation visual only (see T4843). This information is of very low importance, the application navigation is accessed frequently, and the information is available on the application list.
- Partially convert the main navigation. This is mostly to test things, since I want to get more concrete feedback about approaches here.
- Add a `?__aural__=1` attribute, which renders the page with aural-only elements visible and visual-only elements colored.
Test Plan: {F146476}
Reviewers: btrahan, scp, chad
Reviewed By: chad
Subscribers: aklapper, qgil, epriestley
Maniphest Tasks: T4843
Differential Revision: https://secure.phabricator.com/D8830
Summary:
Ref T4398. Allows auth factors to render and validate when prompted to take a hi-sec action.
This has a whole lot of rough edges still (see D8875) but does fundamentally work correctly.
Test Plan:
- Added two different TOTP factors to my account for EXTRA SECURITY.
- Took hisec actions with no auth factors, and with attached auth factors.
- Hit all the error/failure states of the hisec entry process.
- Verified hisec failures appear in activity logs.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8886
Summary:
Ref T4398. This is still pretty rough and isn't exposed in the UI yet, but basically works. Some missing features / areas for improvement:
- Rate limiting attempts (see TODO).
- Marking tokens used after they're used once (see TODO), maybe. I can't think of ways an attacker could capture a token without also capturing a session, offhand.
- Actually turning this on (see TODO).
- This workflow is pretty wordy. It would be nice to calm it down a bit.
- But also add more help/context to help users figure out what's going on here, I think it's not very obvious if you don't already know what "TOTP" is.
- Add admin tool to strip auth factors off an account ("Help, I lost my phone and can't log in!").
- Add admin tool to show users who don't have multi-factor auth? (so you can pester them)
- Generate QR codes to make the transfer process easier (they're fairly complicated).
- Make the "entering hi-sec" workflow actually check for auth factors and use them correctly.
- Turn this on so users can use it.
- Adding SMS as an option would be nice eventually.
- Adding "password" as an option, maybe? TOTP feels fairly good to me.
I'll post a couple of screens...
Test Plan:
- Added TOTP token with Google Authenticator.
- Added TOTP token with Authy.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8875
Summary:
Ref T4398. This adds a settings panel for account activity so users can review activity on their own account. Some goals are:
- Make it easier for us to develop and support auth and credential information, see T4398. This is the primary driver.
- Make it easier for users to understand and review auth and credential information (see T4842 for an example -- this isn't there yet, but builds toward it).
- Improve user confidence in security by making logging more apparent and accessible.
Minor corresponding changes:
- Entering and exiting hisec mode is now logged.
- This, sessions, and OAuth authorizations have moved to a new "Sessions and Logs" area, since "Authentication" was getting huge.
Test Plan:
- Viewed new panel.
- Viewed old UI.
- Entered/exited hisec and got prompted.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8871
Summary:
Ref T4398. This is roughly a "sudo" mode, like GitHub has for accessing SSH keys, or Facebook has for managing credit cards. GitHub actually calls theirs "sudo" mode, but I think that's too technical for big parts of our audience. I've gone with "high security mode".
This doesn't actually get exposed in the UI yet (and we don't have any meaningful auth factors to prompt the user for) but the workflow works overall. I'll go through it in a comment, since I need to arrange some screenshots.
Test Plan: See guided walkthrough.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8851
Summary: Fixes T4772. We weren't parsing generated public keys properly, and were storing them in the wrong format.
Test Plan:
- Updated a private key.
- Generated a public key.
- Saved the public key.
- Used a generated private key to authenticate.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4772
Differential Revision: https://secure.phabricator.com/D8721
Summary:
This adds a system which basically keeps a record of recent actions, who took them, and how many "points" they were worth, like:
epriestley email.add 1 1233989813
epriestley email.add 1 1234298239
epriestley email.add 1 1238293981
We can use this to rate-limit actions by examining how many actions the user has taken in the past hour (i.e., their total score) and comparing that to an allowed limit.
One major thing I want to use this for is to limit the amount of error email we'll send to an email address. A big concern I have with sending more error email is that we'll end up in loops. We have some protections against this in headers already, but hard-limiting the system so it won't send more than a few errors to a particular address per hour should provide a reasonable secondary layer of protection.
This use case (where the "actor" needs to be an email address) is why the table uses strings + hashes instead of PHIDs. For external users, it might be appropriate to rate limit by cookies or IPs, too.
To prove it works, I rate limited adding email addresses. This is a very, very low-risk security thing where a user with an account can enumerate addresses (by checking if they get an error) and sort of spam/annoy people (by adding their address over and over again). Limiting them to 6 actions / hour should satisfy all real users while preventing these behaviors.
Test Plan:
This dialog is uggos but I'll fix that in a sec:
{F137406}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8683
Summary: Ref T4065. Moves the last of the weird alternate edit UI to profiles. The old "Edit" controller is now for creation only, and the funky pencil icon is gone.
Test Plan: Created accounts; sent welcome email.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4065
Differential Revision: https://secure.phabricator.com/D8670
Summary: Ref T4065. Give administrators an "Edit Settings" link from profiles, which allows selective edit of settings panels. Enable Conduit, SSH Keys, and VCS Password.
Test Plan:
- Used these panels for a bot.
- Used these panels on my own account.
- Tried to use these panels for a non-bot account, was denied.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4065
Differential Revision: https://secure.phabricator.com/D8668
Summary:
This is partly a good feature, and partly should reduce false positives on HackerOne reporting things vaguely related to this.
Allow a user to terminate login sessions from the settings panel.
Test Plan:
- Terminated a session.
- Terminated all sessions.
- Tried to terminate all sessions again.
- Logged in with two browsers, terminated the other browser's session, reloaded, got kicked out.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8556
Summary:
- Point them at the new Diviner.
- Make them a little less cumbersome to write.
Test Plan: Found almost all of these links in the UI and clicked them.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8553
Summary:
This is the other half of D8548. Specifically, the attack here was to set your own editor link to `javascript\n:...` and then you could XSS yourself. This isn't a hugely damaging attack, but we can be more certain by adding a whitelist here.
We already whitelist linkable protocols in remarkup (`uri.allowed-protocols`) in general.
Test Plan:
Tried to set and use valid/invalid editor URIs.
{F130883}
{F130884}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8551
Summary:
Fixes T4610. Open to suggestions, etc., if there's anything I'm missing.
Also:
- Moves these "system" endpoints into a real application.
- Makes `isUnlisted()` work a little more consistently.
Test Plan: Accessed `/robots.txt`, `/status/` and `/debug/`.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: aran, epriestley
Maniphest Tasks: T4610
Differential Revision: https://secure.phabricator.com/D8532
Summary: Ref T4587. Add an option to automatically generate a keypair, associate the public key, and save the private key.
Test Plan: Generated some keypairs. Hit error conditions, etc.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: aran, epriestley
Maniphest Tasks: T4587
Differential Revision: https://secure.phabricator.com/D8513
Summary: Via HackerOne. I don't think this is a security vulnerability, but it is inconsistent. There's no reason to prefill this, and I think the code was just lazy.
Test Plan:
- Hit this page with `?email=xyz` in a GET request, no more prefill.
- Looped the page with bad addresses, appropriate prefill.
- Added an address.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8458
Summary: This currently raises a linter `XHP37` warning.
Test Plan: The file now lints okay.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8349
Summary:
Via HackerOne. An attacker can bypass `auth.email-domains` by registering with an email like:
aaaaa...aaaaa@evil.com@company.com
We'll validate the full string, then insert it into the database where it will be truncated, removing the `@company.com` part. Then we'll send an email to `@evil.com`.
Instead, reject email addresses which won't fit in the table.
`STRICT_ALL_TABLES` stops this attack, I'm going to add a setup warning encouraging it.
Test Plan:
- Set `auth.email-domains` to `@company.com`.
- Registered with `aaa...aaa@evil.com@company.com`. Previously this worked, now it is rejected.
- Did a valid registration.
- Tried to add `aaa...aaaa@evil.com@company.com` as an email address. Previously this worked, now it is rejected.
- Did a valid email add.
- Added and executed unit tests.
Reviewers: btrahan, arice
Reviewed By: arice
CC: aran, chad
Differential Revision: https://secure.phabricator.com/D8308
Summary:
Fixes T4463. When your VCS or account password is not set, we test it for upgrade anyway. This doesn't make sense and throws shortly into the process because the empty hash isn't parseable.
Instead, only show upgrade prompts when the password exists.
Test Plan:
- Added a password to an existing account with no password via password reset.
- Added a VCS password to an existing account with no VCS password.
- Observed no fatals / nonsense behaviors.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T4463
Differential Revision: https://secure.phabricator.com/D8282
Summary: Fixes T4443. Plug VCS passwords into the shared key stretching. They don't use any real stretching now (I anticipated doing something like T4443 eventually) so we can just migrate them into stretching all at once.
Test Plan:
- Viewed VCS settings.
- Used VCS password after migration.
- Set VCS password.
- Upgraded VCS password by using it.
- Used VCS password some more.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4443
Differential Revision: https://secure.phabricator.com/D8272
Summary:
Ref T4443.
- Add a `password_hash()`-based bcrypt hasher if `password_hash()` is available.
- When a user logs in using a password, upgrade their password to the strongest available hash format.
- On the password settings page:
- Warn the user if their password uses any algorithm other than the strongest one.
- Show the algorithm the password uses.
- Show the best available algorithm.
Test Plan: As an md5 user, viewed password settings page and saw a warning. Logged out. Logged in, got upgraded, no more warning. Changed password, verified database rehash. Logged out, logged in.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4443
Differential Revision: https://secure.phabricator.com/D8270
Summary: This uses the slightly smaller icons. Not sure about the logout icon, will play with it more in the morning.
Test Plan: tested new nav on desktop and mobile.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8119
Summary:
Ref T3623. This is like a pre-v0, in that it doesn't have a dropdown yet.
Clicking the button takes you to a page which can serve as a right click / mobile / edit target in the long run, but is obviously not great for desktop use. I'll add the dropdown in the next iteration.
Test Plan: {F105631}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T3623
Differential Revision: https://secure.phabricator.com/D8088
