Summary:
Depends on D19750. See T13210. The `bin/drydock lease` command makes it easier to request ad-hoc leases, but currently takes lease attributes in the form `--attributes x=y,a=b`.
This was okay for all leases at the time, but doesn't really work for modern WorkingCopy resources since they take a `repositories.map` which has a dictionary as a value. You can't specify that with `repositories.map=...`.
Instead, point `--attributes` at a JSON file or use `--attributes -` to read from stdin.
Test Plan: Used `--attributes` with a file and stdin to allocate working copy leases with repositories.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D19751
Summary:
Ref T13210. We currently "git reset --hard HEAD" during working copy leasing, mostly by convention/familiarity.
However, this command does not work in an empty repository, because there is no HEAD yet.
The command "git reset --hard" appears to have the same meaning and effect in all cases, except that it also works correctly in an empty repository.
The manual suggests that omitting HEAD should be the same as specifying HEAD, too:
> The <tree-ish>/<commit> defaults to HEAD in all forms.
Test Plan: Successfully leased a working copy for an empty repository using Drydock.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13210
Differential Revision: https://secure.phabricator.com/D19750
Summary:
Ref T13210. See PHI944. When parsing certain large diffs (the case in PHI944 is an 2.5-million line JSON diff), we spend ~66% of runtime and ~80% of memory doing copy detection (the little yellow bar which shows up to give you a hint that code was moved around within a diff).
This is pretty much pointless and copy hints are almost certainly never useful on large changes. Instead, just bail if the change is larger than some arbitrary "probably too big for copy hints to ever be useful" threshold (here, 65535 lines).
Test Plan:
Roughly, ran this against a 2.5 million line JSON diff:
```
$changes = id(new ArcanistDiffParser())->parseDiff($raw_diff);
$diff = DifferentialDiff::newFromRawChanges($viewer, $changes);
```
Before the changes, it took 20s + 2.5GB RAM to parse. After the changes, it took 7s + 500MB RAM to parse.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13210
Differential Revision: https://secure.phabricator.com/D19748
Summary:
Ref T13210. See PHI937. This function datasource isn't quite implemented correctly: it doesn't resolve `package(project)` properly, since the logic only handles users.
This blames back to D14013, where it looks like `packages(..)` was added mostly as a general nice-to-have as part of a larger modernization change.
Test Plan: Ran a `packages(project)` query in Differential, got accurate results (previously: no results).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13210
Differential Revision: https://secure.phabricator.com/D19747
Summary:
Depends on D19734. Ref T13202. Ref T13109. Ref T10884. See PHI905. See PHI889. We currently rank cluster nodes in three cases:
# when performing a write, we can go to any node (D19734 should make our ranking good);
# when performing a read, we can go to any node (currently random, but T10884 discusses ideas to improve our ranking);
# when performing an internal synchronization before a read or a write, we must go to an up-to-date node.
Currently, case (3) is not-exactly-deterministic but not random, and we won't spread intracluster traffic acrosss the cluster evenly if, say, half of it is up to date and half of it is still synchronizing. For a given write, I believe all nodes will tend to synchronize from whichever node first received the write today.
Instead, shuffle the list and synchronize from any up-to-date node.
(I think we could improve upon this only by knowing which nodes actually have load and selecting the least-loaded -- doable, but not trivial.)
Test Plan: Poked at it locally, will deploy to `secure`. This is hard to measure/test terribly convincingly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13202, T13109, T10884
Differential Revision: https://secure.phabricator.com/D19735
Summary:
Ref T13109. Ref T13202. See PHI905. See PHI889. When we receive a write to a repository cluster, we currently send it to a random writable node.
Instead, we can prefer:
- the node currently holding the write lock; or
- any node which is already up to date.
These should simply be better nodes to take writes in all cases. The write lock is global for the repository, so there's no scaling benefit to spreading writes across different nodes, and these particular nodes will be able to accept the write more quickly.
Test Plan:
- This is observable by using `fprintf(STDERR, "%s\n", ...)` in the logic, then running `git push`. I'd like to pull this routing logic out of `PhabricatorRepository` at some point, probably into a dedicated `ClusterURIQuery` sort of class, but that is a larger change.
- Added some `fprintf(...)` stuff around which nodes were being selected.
- Added a `sleep(10)` after grabbing the write lock.
- In one window, pushed. Then pushed in a second window.
- Saw the second window select the lock holder as the write target based on it currently holding the lock.
- Without a concurrent push, saw pushes select up-to-date nodes based on their up-to-date-ness.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: joshuaspence, timhirsh
Maniphest Tasks: T13202, T13109
Differential Revision: https://secure.phabricator.com/D19734
Summary:
See PHI920. Ref T13210. Since the HTML is just:
```
<a>View Inline</a><span>filename.txt</span>
```
..double-clicking "filename.txt" in email selects "Inlinefilename.txt".
Add a space to stop this. At least in Safari, a space between the tags is not sufficient (perhaps because the parent is a `<div>`?). I couldn't find an authoritative-seeming source on what the rules for this actually are and adding a space here fixes the issue without changing the visual rendering, so just put it here.
Test Plan:
- Made an inline.
- Used `bin/mail show-outbound --id ... --dump-html` to dump the HTML.
- Double-clicked the filename.
{F5929186}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13210
Differential Revision: https://secure.phabricator.com/D19742
Summary:
Depends on D19743. Ref T13210. Since this command can easily dump a bunch of binary data (or just a huge long blob of nonsense) to stdout, default to requiring "--output <file>".
Using `--output -` will print to stdout.
Test Plan: Ran with: no `--output`, `--output file`, `--output -`, `--output - --overwrite`. Got sensible results or errors in all cases.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13210
Differential Revision: https://secure.phabricator.com/D19744
Summary: Ref T13210. See PHI806. This enables basic export of revisions into flat data formats. This isn't too fancy, but just covers the basics since the driving use case isn't especially concerned about getting all the fields and details.
Test Plan: Exported some revisions into JSON, got sensible output.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13210
Differential Revision: https://secure.phabricator.com/D19743
Summary: Depends on D19738. Ref T13210. Currently, when you use "--overwrite", we just //append// the new content. Instead, actually overwrite the file.
Test Plan: Used `--overwrite`, saw an actual clean overwrite instead of an append.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13210
Differential Revision: https://secure.phabricator.com/D19739
Summary:
Ref T13210. Minor usability improvements to "bin/bulk export":
- Allow `--class task` to work (previously, only `--class ManiphestTaskSearchEngine` worked).
- If you run `--query jXIlzQyOYHPU`, don't require `--class`, since the query identifies the class on its own.
- Allow users to call `--query A --query B --query C` and get a union of all results.
Test Plan:
- Ran `--class task`, `--query A --query B`, `--query X` (with no `--class`), got good results.
- Ran various flavors of bad combinations (queries from different engines, invalid engines, query and class differing, ambiguous/invalid `--class` name) and got sensible errors.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13210
Differential Revision: https://secure.phabricator.com/D19738
Summary:
Ref T13202. See PHI900. Fixes T12814. Pholio currently builds HTML comments in an older way that can dump a bunch of over-escaped HTML into mail bodies.
Update the logic to be more similar to the Differential rendering logic and stop over-escaping things.
The result isn't perfect, but is dramatically less broken.
Test Plan: {F5919860}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13202, T12814
Differential Revision: https://secure.phabricator.com/D19733
Summary:
Ref T13202. See PHI906. This is a reasonable capability which we support in some other applications already.
(The only real reason not to support this is that it creates some clutter in the UI, but I think we're generally in better shape now than we were in the past, and we could make this UI collapse/fold at some point.)
Test Plan: Ran queries with a minimum date, a maximum date, both, and neither. Saw appropriate results in all cases.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13202
Differential Revision: https://secure.phabricator.com/D19732
Summary:
Ref T13202. See <https://discourse.phabricator-community.org/t/2fa-input-box-isnt-hinted-as-a-password-so-browsers-suggest-auto-fills/1959>.
If browsers are autofilling this, I think browser behavior here is bad, but behavior is probably better on the balance if we hint this as `autocomplete="off"` and this is a minor concesssion.
Test Plan:
- I couldn't immediately get any browser to try to autofill this field (perhaps I've disabled autofill, or just not enabled it aggressively?), but this change didn't break anything.
- After the change, answered a TOTP prompt normally.
- After the change, inspected page content and saw `autocomplete="off"` on the `<input />` node.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13202
Differential Revision: https://secure.phabricator.com/D19722
Summary:
Ref T13202. See PHI903 and PHI894. When a bot leaves 100 inline comments on the same file and the revision has a 30-member recipient list, we currently highlight the file 3000 times when building mail.
Instead, engage the parse cache so we highlight it once and reuse the cache 2,999 times.
Test Plan:
- Added debugging code to stop after mail generation and show cache hits/misses.
- Left a bunch of inlines in a file.
- Ran the worker with `bin/worker execute --id ...`.
- Before change: saw 4 comments x 2 recipients = 8 cache misses
- After change: saw 8 cache hits (cache already filled from web UI rendering)
- Removed debugging code, ran worker to completion.
- Used `bin/mail show-outbound --id ... --dump-html` to inspect resulting mail, saw no functional differences.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13202
Differential Revision: https://secure.phabricator.com/D19721
Summary: Ref D18268. This typo cancelled itself out, and I can't find any other callers.
Test Plan: arc unit
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D19718
Summary:
Now on the blame page, identities get `avatar.png` and there are little tooltips that show a few characters of the committer identity string.
Also add a default icon for repo identities.
Test Plan: Loaded some blame pages for files touched by users with and without repo identities attached.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D19587
Summary:
Ref T13202. See PHI889. If the lock log is enabled, we can try to offer more details about lock holders.
When we fail to acquire a lock:
- check for recent acquisitions and suggest that this is a bottleneck issue;
- if there are no recent acquisitions, check for the last acquisition and print details about it (what process, how long ago, whether or not we believe it was released).
Test Plan:
- Enabled the lock log.
- Changed the lock wait time to 1 second.
- Added a `sleep(10)` after grabbing the lock.
- In one window, ran a Conduit call or a `git fetch`.
- In another window, ran another operation.
- Got useful/sensible errors for both ssh and web lock holders, for example:
> PhutilProxyException: Failed to acquire read lock after waiting 1 second(s). You may be able to retry later. (This lock was most recently acquired by a process (pid=12609, host=orbital-3.local, sapi=apache2handler, controller=PhabricatorConduitAPIController, method=diffusion.rawdiffquery) 3 second(s) ago. There is no record of this lock being released.)
> PhutilProxyException: Failed to acquire read lock after waiting 1 second(s). You may be able to retry later. (This lock was most recently acquired by a process (pid=65251, host=orbital-3.local, sapi=cli, argv=/Users/epriestley/dev/core/lib/phabricator/bin/ssh-exec --phabricator-ssh-device local.phacility.net --phabricator-ssh-key 2) 2 second(s) ago. There is no record of this lock being released.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13202
Differential Revision: https://secure.phabricator.com/D19702
Summary:
Ref T13202. See PHI889. Update the read and write locks to the modern parameterized verison, which handles hashing/normalization and can store better logs.
This parameterized mode was added in D19173 and has been used successfully for some time, but not all locks have switched over to it yet.
Test Plan:
- Added an `fprintf(STDERR, $full_name)` to the lock code.
- Pulled a repository.
- Saw sensible lock name on stdout before "acquired read lock...".
- Additional changes in this patch series will vet this more completely.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13202
Differential Revision: https://secure.phabricator.com/D19701
Summary:
Ref T13202. In D19660, I added comments to Phriction and tweaked some CSS.
One of these tweaks was getting rid of an extra border which was rendering under the comment area. However, I took off too much and ended up removing borders from other applications.
I think we don't actually need this `setNoBorder()` stuff after all -- a later change was sufficient to stop the actual border I was trying to get rid of from rendering. So this mostly just reverts part of D19660.
This rendering still isn't perfect, but I'm fine leaving that for another day for now.
Test Plan:
- Viewed comment areas in Phriction. Saw correct number of borders (1).
- Viewed comment areas in Maniphest. Saw correct number of borders (1).
- Grepped for extraneous removed classs, no hits.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13202
Differential Revision: https://secure.phabricator.com/D19684
Summary:
Depends on D19682. Ref T13202. We currently fatal when trying to render a timeline if:
- an install is fresh, so there are no pages yet, and you look at "/w/"; or
- you're looking at a Phriction page which doesn't exist (yet) like "/w/aadsflknadsflnf/".
Rendering a timeline and comment area doesn't make sense in these cases, so don't render them.
Test Plan: Hit both cases described above, got "new/empty page" prompts instead of fatals.
Reviewers: amckinley
Maniphest Tasks: T13202
Differential Revision: https://secure.phabricator.com/D19683
Summary:
Ref T13202. See PHI881. These stories have bad rendering methods, but they didn't previously render into the timeilne (since Phriction documents didn't have a timeline).
Update the rendering to work.
The rendered outcome isn't great (it isn't very clear or explicit about exactly what moved where), but I'll fix that in a followup. This is a net improvement since it doesn't fatal the page, at least.
Test Plan:
- Moved page "X" to "Y".
- Viewed the old page "X".
- Before patch: bad timeline story would fatal rendering.
- After patch: story renders, at least, just not great.
Reviewers: amckinley
Maniphest Tasks: T13202
Differential Revision: https://secure.phabricator.com/D19682
Summary:
Depends on D19672. Ref T13197. See PHI873. This writes a trivial log when we begin acting on a working copy and makes it look reasonable in the UI.
This is mostly just to prove that logging works properly.
Test Plan: {F5887697}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19673
Summary:
Depends on D19671. Ref T13197. See PHI873.
Expose logs in the RepositoryOperation UI. Nothing writes the logs yet, so these interfaces are currently always empty.
Test Plan:
{F5887102}
{F5887103}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19672
Summary: Ref T13197. See PHI873. I want to give RepositoryOperation objects access to Drydock logging like leases, resources, and blueprints currently have. This just does the schema/query changes, no actual UI or new logging yet.
Test Plan: Ran storage upgrade, poked around the UI looking for anything broken.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19671
Summary: Depends on D19668. Ref T13197. See PHI840. This updates the documentation to describe how drafts work in more detail.
Test Plan: Read documentation.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19669
Summary:
Ref T13077. Ref T13197. See PHI840.
- In the "History > Diff/Compare" view, the button language wasn't draft-aware.
- Revise language to avoid the word "Revert", since this can be ambiguous.
- "Edit this page, starting with an older version of the text" is now "Edit Older|Current|Draft Version X".
- "Mark this older version of the page as the current published version" is now "Publish Older Version".
- Let the user edit the current published version, too, since this is a reasonable operation if there are drafts.
Test Plan: Navigated the history diff view, saw better button and action text.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13197, T13077
Differential Revision: https://secure.phabricator.com/D19668
Summary: Depends on D19663. Ref T13077. When you edit a Phriction draft, don't publish a feed story. (The eventual "Publish" event gets a story.)
Test Plan: Made draft / non-draft / publish edits, only saw feed stories for non-draft and publish edits.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19664
Summary:
Depends on D19662. Ref T13077. See PHI840.
- If you're looking at the published version of a document, but a draft version exists and you can edit it, add a hint/link.
- Fix an issue where the "draft" transaction would complain when you created a document since the initial content is empty and no "draft" transaction is adding any content.
Test Plan: Created new documents, viewed documents with current published versions and unpublished drafts.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19663
Summary:
Depends on D19661. Ref T13077. See PHI840.
When a user edits a page normally, add a "Save as Draft" button. Much of this change is around making that button render and behave properly: it needs to be an `<input type="submit" ...>` so browsers submit it and we can figure out which button the user clicked.
Then there are a few minor rules:
- If you're editing a page which is already a draft, we only give you "Save as Draft". This makes edits to update/revise a draft more natural.
- Highlight "Publish" if it's a likely action that you might want to take.
Internally, there are two types of edits. Both types create a new version with the new content. However:
- A "content" edit sets the version shown on the live page to the newly-created version.
- A "draft" edit does not update the version shown on the live page.
Test Plan: Edited a published document, edited the draft. Published documents. Reverted documents.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19662
Summary:
Depends on D19660. Ref T5811. Ref T13077.
Long ago, if you started editing a Phriction document but didn't save it, we'd save the draft in the background as part of the preview.
D11169 updated the preview to use shared infrastructure and broke this function, since we never save drafts.
Since this doesn't work right now, I want to add another thing called "draft", and the future of this feature should be more integrated with modern drafts and EditEngine (which fixed some bugs related to versioning), just get rid of this code for the moment.
Test Plan: Edited documents. This code doesn't do anything since D11169, so no behavior changed.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13077, T5811
Differential Revision: https://secure.phabricator.com/D19661
Summary:
Depends on D19659. Fixes T1894. Ref T13077. See PHI840.
- Add an EditEngine, although it currently supports no fields.
- Add (basic, top-level-only) commenting (we already had the table in the database).
This will probably create some issues. I'm most concerned about documents accumulating a ton of old, irrelevant comments over time which are hard to keep track of and no longer relevant. But I think this is probably a step forward in almost all cases, and a good thing on the balance.
This also moves us incrementally toward putting all editing on top of EditEngine.
Test Plan: {F5877347}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13077, T1894
Differential Revision: https://secure.phabricator.com/D19660
Summary:
Ref T13197. See PHI873. Record when a user has MFA'd and add a little icon to the transaction, similar to the exiting "Silent" icon.
For now, this just makes this stuff more auditable. Future changes may add ways to require MFA for certain specific transactions, outside of the ones that already always require MFA (like revealing credentials).
Test Plan: {F5877960}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19665
Summary:
Depends on D19657. Ref T13197. See PHI841.
This enriches the results from `diffusion.commit.search` with information similar to the information returned by the "commits" attachment from `differential.diff.search`.
Also include unreachable, imported, message, audit status, and repository PHID.
Test Plan: Called `diffusion.commit.search` and reviewed the results, which looked sensible.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19658
Summary:
Depends on D19656. Ref T13197. See PHI851.
- This class is now a real object, so get rid of the "Constants" part of the name.
- Rename it for greater consistency with other modern objects.
- Get rid of the `MODERN_` tag now that the old constants are gone.
Test Plan: Bunch of `grep`, browsed around.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19657
Summary: Depends on D19655. Ref T13197. These no longer have callers.
Test Plan: Grepped for these constants.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19656
Summary: Depends on D19652. Ref T13197. See PHI851. This migrates the actual `auditStatus` on Commits, and older status transactions.
Test Plan:
- Ran migrations.
- Spot-checked the database for sanity.
- Ran some different queries, got unchanged results from before migration.
- Reviewed historic audit state transactions, and accepted/raised concern on new audits. All state transactions appeared to generate properly.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19655
Summary: Depends on D19651. Ref T13197. The application now accepts either numeric or string values. However, for consistency and to reduce surprise in the future, migrate existing saved queries to use string values.
Test Plan: Saved some queries on `master` with numeric constants, ran the migration, saw string constants in the database and equivalent behavior in the UI.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19652
Summary:
Ref T13077. See PHI840. Ref T1894. I'm planning to just let you comment on Phriction documents. I think this will create a few problems (e.g., around popular documents which collect long comment threads that are eventually obsolete) but nothing should be too terribly critical (e.g., we handle it gracefully when objects have very large number of comments/transactions) and for most documents this is likely just a net improvement.
"Just enable comments" is probably not the final iteration on this, but I think it's probably a step forward on the balance, not a step sideways or a slippery slope down into a dark hole or anything.
Test Plan: {F5877316}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13077, T1894
Differential Revision: https://secure.phabricator.com/D19659
Summary: See PHI871. Ref T13197. These sections are only divided visually and don't have textual headers. Add aural headers.
Test Plan: {F5875471}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19654
Summary:
Depends on D19650. Ref T13197. Allow `SearchCheckboxesField` to have a "deprecated" map of older aliases, then convert them to modern values.
On the API method page, show all the values.
This technically resolves the issue in PHI841, although I still plan to migrate behind this.
Test Plan:
{F5875363}
- Queried audits, fiddled with `?status=1,audited`, etc.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19651
Summary: Ref T13197. We're almost ready to migrate: let the Query accept either older integer values or new string values. Then move some callsites to use strings.
Test Plan: Called `audit.query`, browsed audits, audited commits.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19650
Summary: Ref T13195. See PHI851. Continuing down the path toward replacing these legacy numeric constants with more modern string constants.
Test Plan:
- Raised concern, requested verification, verified.
- Looked at commit hovercard with audit status.
- Viewed header on a commit page.
- (Didn't test the Doorkeeper stuff since it requires linking to Asana and seems unlikely to break.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13195
Differential Revision: https://secure.phabricator.com/D19647
Summary:
Ref T13195. If a Phriction page begins with a code block, the `clear: both;` currently makes it clear the action list.
Instead, use table-cell layout on desktops.
Test Plan: Viewed a Phriction page with an initial code block on desktop/tablet/mobile/printable layouts. Now got more sensible layouts in all cases.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: GoogleLegacy
Maniphest Tasks: T13195
Differential Revision: https://secure.phabricator.com/D19649
Summary:
Ref T13195. Fixes T8573. When you're adding inlines to your own stuff, mark them "Done" by default. You can unmark them as "Done" if you're legitimately leaving TODOs for yourself, although I think this is unusual.
(If this turns out to be less unusual than I think, we could consider an alternate rule: mark replies by the author as "Done" by default.)
Test Plan: Added some inlines as an author and a non-author. Saw my author inlines marked as "Done" by default. Submitted them; unmarked and submittted them.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13195, T8573
Differential Revision: https://secure.phabricator.com/D19635
Summary:
Ref T13195. Ref T8573. This allows reviewers to mark their own inline comments as "Done" before they submit them.
If you're leaving a non-actionable comment like "this is good", you can pre-check "Done" to give the author a hint that you don't expect any response.
Test Plan: On revisions and commits, added inlines as the author and a reviewer/auditor. Marked them done/not-done before submitting. As author, marked the not-done ones done after submitting. Checked preivews, toggled done/not done states.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13195, T8573
Differential Revision: https://secure.phabricator.com/D19634
