Summary: Refs T2255 and takes care of the "EXTENDING PHABRICATOR" group thereof.
Test Plan: Looked at each of the new options.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4325
Summary: This config section is weak (poorly documented) and inconsistent (keys with "_" instead of "-") but I'm going to keep punting on improving it until after T1536.
Test Plan: Loaded, examined LDAP config.
Reviewers: btrahan, codeblock
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4322
Summary:
- Move GC options into PHP.
- Remove the "run at" and "run for" options. The GC daemon doesn't actually do any table scans, is very gentle, and runs for like 3 seconds per day in any normal install. Just limit it to running once every 4 hours when it's caught up and call it a day.
Test Plan: Edited GC options.
Reviewers: btrahan, codeblock
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4321
Summary: This is more or less a copy of the validation which lives in `webroot/index.php` right now, but I don't want to wipe that out just yet because there's no way for normal users to see this new validation.
Test Plan: Tried to set "phabricator.base-uri" to crazy nonsense, was harshly rebuffed.
Reviewers: codeblock, btrahan
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4316
Summary:
- Allows us to implement setup warnings for edits which don't go through the web UI, e.g. "you edited a config file and set value X to something goofy".
- Allows us to implement more sophisticated validations, beyond basic type checks (e.g., "phabricator.base-uri" must be a URI).
- Fixes T358 (or, close enough -- fixes it for all options which have been migrated as per T2255.
Test Plan: Set "darkconsole.enabled" to "xyz" in my config, observed setup warning. Added fake validation, observed web UI edit error.
Reviewers: codeblock, btrahan
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2255, T358
Differential Revision: https://secure.phabricator.com/D4315
Summary: Use ApplicationTransactions in Config to create an edit history. Resolves T2256.
Test Plan: {F28477}
Reviewers: btrahan, codeblock
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2256
Differential Revision: https://secure.phabricator.com/D4314
Summary: Show the value for all loaded configuration sources.
Test Plan:
{F28469}
{F28470}
{F28471}
Reviewers: btrahan, codeblock
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4312
Summary: Also improve behavior for the "unknown config" warning.
Test Plan: Looked at configs, went through unknown config workflow.
Reviewers: btrahan, codeblock
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4310
Summary:
- Add a "developer" option group.
- Add an "access log" option group.
- Render the types "bool", "int" and "string" in a more tailored way.
- Add a config check for dead config. Right now this serves as a "TODO" list of things that need to be migrated.
Test Plan: Looked at config options, setup issues. Edited bool, int, string options.
Reviewers: codeblock, btrahan
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4308
Summary:
- When a setup issue is nonfatal (i.e., a warning), instruct the user to edit the value from the web UI instead of using `bin/config`.
- When the user edits configuration in response to a setup issue, send them back to the issue when they're done.
- When an issue relates to PHP configuration, link to the PHP documentation on configuration.
- Add new-style setup check for timezone issues.
Test Plan: Mucked with my timezone config, resolved the issues I created.
Reviewers: codeblock, btrahan, vrana
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2221, T2228
Differential Revision: https://secure.phabricator.com/D4298
Summary: Ref T2255. Ref T2221. Lay the groundwork to move configuration into PHP, so we can show descriptions in the web UI, do typechecking, disable application options when an application is uninstalled, etc.
Test Plan:
{F28421}
{F28420}
{F28422}
Reviewers: codeblock, btrahan, vrana
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2221, T2255
Differential Revision: https://secure.phabricator.com/D4306
Summary:
This is basicaly a light version of D4286. The major problem with D4286 is that it's a huge leap and completely replaces the setup process in one step.
Instead, I want to do this:
- Add the post-setup warnings (yellow bar with "6 unresolved warnings...").
- Copy all setup checks into post-setup warnings (so every check has an old-style check and a new-style check).
- Run that for a little bit and make sure it's stable.
- Implement fatal post-setup checks (the red screen, vs the yellow bar).
- Run that for a little bit.
- Nuke setup mode and delete all the old checks.
This should give us a bunch of very gradual steps toward the brave new world of simpler setup.
Test Plan:
- Faked APC setup failures, saw warnings raise.
- Verified that this runs after restart (get + set).
- Verified that this costs us only one cache hit after first-run (get only).
Reviewers: btrahan, codeblock, vrana, chad
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2228
Differential Revision: https://secure.phabricator.com/D4295
Summary:
See discussion in T2221. Before we can move configuration to the database, we have a bootstrapping problem: we need database credentials to live //somewhere// if we can't guess them (and we can only really guess localhost / root / no password).
Some options for this are:
- Have them live in ENV variables.
- These are often somewhat unfamiliar to users.
- Scripts would become a huge pain -- you'd have to dump a bunch of stuff into ENV.
- Some environments have limited ability to set ENV vars.
- SSH is also a pain.
- Have them live in a normal config file.
- This probably isn't really too awful, but:
- Since we deploy/upgrade with git, we can't currently let them edit a file which already exists, or their working copy will become dirty.
- So they have to copy or create a file, then edit it.
- The biggest issue I have with this is that it will be difficult to give specific, easily-followed directions from Setup. The instructions need to be like "Copy template.conf.php to real.conf.php, then edit these keys: x, y, z". This isn't as easy to follow as "run script Y".
- Have them live in an abnormal config file with script access (this diff).
- I think this is a little better than a normal config file, because we can tell users 'run phabricator/bin/config set mysql.user phabricator' and such, which is easier to follow than editing a config file.
I think this is only a marginal improvement over a normal config file and am open to arguments against this approach, but I think it will be a little easier for users to deal with than a normal config file. In most cases they should only need to store three values in this file -- db user/host/pass -- since once we have those we can bootstrap everything else. Normal config files also aren't going away for more advanced users, we're just offering a simple alternative for most users.
This also adds an ENVIRONMENT file as an alternative to PHABRICATOR_ENV. This is just a simple way to specify the environment if you don't have convenient access to env vars.
Test Plan: Ran `config set x y`, verified writes. Wrote to ENVIRONMENT, ran `PHABRICATOR_ENV= ./bin/repository`.
Reviewers: btrahan, vrana, codeblock
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2221
Differential Revision: https://secure.phabricator.com/D4294
Summary:
This is somewhat clowny, particularly in how it handles JSON encode/decode, but
I've commented why I did things the way I did. The goal is to store minified JSON
but show pretty-printed JSON where possible, to the user editing it.
Test Plan:
* Went to /config/ and saw a list of keys from the `default` config.
* Clicked on one of them, submitted the default value successfully.
* Changed the value to invalid JSON and got a decent error.
* Changed the value to valid JSON and checked the DB to confirm it saved.
* Confirmed the DB values were minified.
* Confirmed the user-facing values were pretty-printed where they could be.
* Confirmed that PHIDs were getting assigned properly and that isDeleted
properly defaulted to false/0.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2246
Differential Revision: https://secure.phabricator.com/D4290
Summary: Currently, we have a configuration stack for unit tests, but they're built in to `PhabricatorEnv`. Pull them out and formalize them, so we can add more configuration sources (e.g., database).
Test Plan: Ran unit tests, web requests, scripts. This code had fairly good existing test coverage.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2223, T2221
Differential Revision: https://secure.phabricator.com/D4284
Summary:
We have a bunch of code duplication now between __init_script__.php and webroot/index.php. Consoldiate these methods and move them into PhabricatorEnv.
Merge PhabricatorRequestOverseer into PhabricatorStartup.
Test Plan: Loaded page, ran script. Wiped PHABRICATOR_ENV; loaded page, ran script; got errors.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2223
Differential Revision: https://secure.phabricator.com/D4283
Summary:
See T2062. This cache allows us to essentially implement this sort of block:
if (this_code_has_not_run_since_the_last_server_restart()) {
...
}
This will let us do setup checks automatically (i.e., without a specialized setup mode) without imposing hundreds of milliseconds of `git submodule status` and similar checks on every page load, even if an install does not have APC.
Broadly, the major goals here are:
- Reduce user errors and support costs related to misconfiguration (e.g., failure to update submodules).
- Simplify setup and configuration (remove 'phabricator.setup', remove/reduce PHABRICATOR_ENV).
- Move as much configuration to the web as possible (required for SaaS).
Test Plan:
Added this block to webroot/index.php:
$cache = PhabricatorCaches::getSetupCache();
$result = $cache->getKeys(array('x'));
if (empty($result['x'])) {
phlog('Cache miss + set.');
$cache->setKeys(array('x' => 'y'));
} else {
phlog('Cache hit.');
}
Verified it used APC correctly.
Disabled APC and verified it degraded to a reasonable disk-based behavior.
If we miss both of these we end up with no actual caching, but that's the best we can do. This code will also run too early in setup for it to be appropriate to raise exceptions out of this pathway -- later on, we can raise a warning that APC is not installed.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2227, T2062
Differential Revision: https://secure.phabricator.com/D4281
Summary:
The search indexing API has several problems right now:
- Always runs in-process.
- It would be nice to push this into the task queue for performance. However, the API currently passses an object all the way through (and some indexers depend on preloaded object attributes), so it can't be dumped into the task queue at any stage since we can't serialize it.
- Being able to use the task queue will also make rebuilding indexes faster.
- Instead, make the API phid-oriented.
- No uniform indexing API.
- Each "Editor" currently calls SomeCustomIndexer::indexThing(). This won't work with AbstractTransactions. The API is also just weird.
- Instead, provide a uniform API.
- No uniform CLI.
- We have `scripts/search/reindex_everything.php`, but it doesn't actually index everything. Each new document type needs to be separately added to it, leading to stuff like D3839. Third-party applications can't provide indexers.
- Instead, let indexers expose documents for indexing.
- Not application-oriented.
- All the indexers live in search/ right now, which isn't the right organization in an application-orietned view of the world.
- Instead, move indexers to applications and load them with SymbolLoader.
Test Plan:
- `bin/search index`
- Indexed one revision, one task.
- Indexed `--type TASK`, `--type DREV`, etc., for all types.
- Indexed `--all`.
- Added the word "saboteur" to a revision, task, wiki page, and question and then searched for it.
- Creating users is a pain; searched for a user after indexing.
- Creating commits is a pain; searched for a commit after indexing.
- Mocks aren't currently loadable in the result view, so their indexing is moot.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: 20after4, aran
Maniphest Tasks: T1991, T2104
Differential Revision: https://secure.phabricator.com/D4261
Summary:
See discussion in D4204. Facebook currently has a 314MB remarkup cache with a 55MB index, which is slow to access. Under the theory that this is an index size/quality problem (the current index is on a potentially-384-byte field, with many keys sharing prefixes), provide a more general index with fancy new features:
- It implements PhutilKeyValueCache, so it can be a component in cache stacks and supports TTL.
- It has a 12-byte hash-based key.
- It automatically compresses large blocks of data (most of what we store is highly-compressible HTML).
Test Plan:
- Basics:
- Loaded /paste/, saw caches generate and save.
- Reloaded /paste/, saw the page hit cache.
- GC:
- Ran GC daemon, saw nothing.
- Set maximum lifetime to 1 second, ran GC daemon, saw it collect the entire cache.
- Deflate:
- Selected row formats from the database, saw a mixture of 'raw' and 'deflate' storage.
- Used profiler to verify that 'deflate' is fast (12 calls @ 220us on my paste list).
- Ran unit tests
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4259
Summary:
Implements previews for Macros and Pholio.
(Design is nonfinal -- kind of split the difference between `diff_full_view.png`, laziness, and space concerns. Next couple diffs will add more stuff here.)
Test Plan: {F28055}
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran, vrana
Maniphest Tasks: T2104
Differential Revision: https://secure.phabricator.com/D4246
Summary: Does this seem reasonable? It's a bit more compact than digest() (6 bits / byte instead of 4 bits / byte) and 72 bits of entropy @ 12 bytes instead of 128 bits of entropy @ 32 bytes. I feel like it's important to preserve the printability, though, and this seemed like a fairly good balance of concerns.
Test Plan: unit tests
Reviewers: vrana
Reviewed By: vrana
CC: aran, yemao932
Differential Revision: https://secure.phabricator.com/D4253
Summary:
- Build "sshd-auth" (for authentication) and "sshd-exec" (for command execution) binaries. These are callable by "sshd-vcs", located [[https://github.com/epriestley/sshd-vcs | in my account on GitHub]]. They are based on precursors [[https://github.com/epriestley/sshd-vcs-glue | here on GitHub]] which I deployed for TenXer about a year ago, so I have some confidence they at least basically work.
- The problem this solves is that normally every user would need an account on a machine to connect to it, and/or their public keys would all need to be listed in `~/.authorized_keys`. This is a big pain in most installs. Software like Gitosis/Gitolite solve this problem by giving you an easy way to add public keys to `~/.authorized_keys`, but this is pretty gross.
- Roughly, instead of looking in `~/.authorized_keys` when a user connects, the patched sshd instead runs `echo <public key> | sshd-auth`. The `sshd-auth` script looks up the public key and authorizes the matching user, if they exist. It also forces sshd to run `sshd-exec` instead of a normal shell.
- `sshd-exec` receives the authenticated user and any command which was passed to ssh (like `git receive-pack`) and can route them appropriately.
- Overall, this permits a single account to be set up on a server which all Phabricator users can connect to without any extra work, and which can safely execute commands and apply appropriate permissions, and disable users when they are disabled in Phabricator and all that stuff.
- Build out "sshd-exec" to do more thorough checks and setup, and delegate command execution to Workflows (they now exist, and did not when I originally built this stuff).
- Convert @btrahan's conduit API script into a workflow and slightly simplify it (ConduitCall did not exist at the time it was written).
The next steps here on the Repository side are to implement Workflows for Git, SVN and HG wire protocols. These will mostly just proxy the protocols, but also need to enforce permissions. So the approach will basically be:
- Implement workflows for stuff like `git receive-pack`.
- These workflows will implement enough of the underlying protocol to determine what resource the user is trying to access, and whether they want to read or write it.
- They'll then do a permissons check, and kick the user out if they don't have permission to do whatever they are trying to do.
- If the user does have permission, we just proxy the rest of the transaction.
Next steps on the Conduit side are more simple:
- Make ConduitClient understand "ssh://" URLs.
Test Plan: Ran `sshd-exec --phabricator-ssh-user epriestley conduit differential.query`, etc. This will get a more comprehensive test once I set up sshd-vcs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603, T550
Differential Revision: https://secure.phabricator.com/D4229
Summary: Continue work started at D3601.
Test Plan:
Commented declaration `AphrontController::$request`, saw exception.
Brought it back, didn't see exception.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4233
Summary: The logs bits still need some work but add crumbs/lists to everything else. Also build a propery DrydockResourceQuery.
Test Plan: Looked at lease list/detail; resource list/detail.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D4221
Summary: Minor updates to Drydock things to make them work better. In particular, after this patch working copies are correctly allocated or reused.
Test Plan: Ran "reparse.php --harbormaster <derp derp>", saw reuse of working copies when unleased resources were avilable.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D4216
Summary:
This is very preliminary and doesn't actually do anything useful. In theory, it uses Drydock to check out a working copy and run tests. In practice, it's not actually capable of running any of our tests (because of complicated interdependency stuff), but does check out a working copy and //try// to run tests there.
Adds various sorts of utility methods to various things as well.
Test Plan: Ran `reparse.php --harbormaster --trace <commit>`, observed attempt to run tests via Drydock.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015, T1049
Differential Revision: https://secure.phabricator.com/D4215
Summary:
Modernizes file uploads. In particular:
- Adds a mobile menu, with an "Upload File" item.
- Adds crumbs to the list view, detail view and upload view.
- Adds "Upload File" action to crumbs.
- Moves upload file to a separate page.
- Removes the combined upload file + recent files page.
- Makes upload file use a normal file control by default (works on mobile).
- Home page, file list and file upload page are now global drop targets which accept files dropped anywhere on them. Dragging a file into the window shows a mask and an instructional message.
- User education on this is a little weak but I think that's a big can of worms?
- Fixes a bug where dropping multiple files into a Remarkup text area produced bad results (resolves T2190).
T879 is related, although it's specifically about Maniphest. I've declined to make global drop targets yet there because there are multiple drop targets on the page with different meanings. That UI needs updating in general.
@chad, do we have an "upload" icon (counterpart to "download")?
Test Plan: Uploaded files in Maniphest, Differential, Files, and from Home. Dragged and dropped multiple files into Differential. Used crumbs, mobile.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2190
Differential Revision: https://secure.phabricator.com/D4200
Summary:
D4188 adds a preview of Paste contents to the list, but gets slow for large lists if you have Pygments installed since it has to spend ~200ms/item highlighting them. Instead, cache the highlighted output.
- Adds a Paste highlighting cache. This uses RemarkupCache because it has automatic GC and we don't have a more generalized cache for the moment.
- Uses the Paste cache on paste list and paste detail.
- Adds a little padding to the summary.
- Adds "..." if there's more content.
- Adds line count and language, if available. These are hidden on Mobile.
- Nothing actually uses needRawContent() but I left it there since it doesn't hurt anything and is used internally (I thought the detail view did, but it uses the file content directly, and must for security reasons).
Test Plan:
{F27710}
- Profiled paste list, saw good performance and few service calls.
- Viewed paste.
- Viewed raw paste content.
Reviewers: codeblock, btrahan, chad
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D4204
Summary: Permit the forcible release of Drydock leases. The implementation isn't very exciting for now.
Test Plan: Released leases via web and CLI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D4181
Summary:
Right now, Drydock gives out multiple leases to the same working copy and gives out leases to working copies with repository "P" in them when the user requested some other repository.
Add two callbacks:
- `canAllocateLease()` - allows a blueprint to reject a lease on a resource because of a fundamental incompatibility, like "it's a working copy with Phabricator in it, but the lease wants a working copy with Javelin in it".
- `shouldAllocateLease()` - allows a blueprint to reject a lease on a resource because of resource limits, like "only one active lease can own a working copy at a time".
Also cleaned up various other things.
Test Plan:
After implementing the callbacks, Drydock has the correct behavior:
- It gives multiple leases on `localhost`, but only one lease per working-copy resource.
- It does not grant leases on resources with repository X to requests for repository Y.
Ran `bin/drydock lease --type working-copy --repositoryID 12` and similar repeatedly and verified results in the web console.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D4166
Summary:
upgrades are CrumbsView, HeaderView, PropertyListView, and ActionListView. I had to modify CrumbsView stuff a bit to handle the "advanced" diffusion crumbs.
Quirks fixed include making file tree view show up in diffusion, the page not have extra space when the file tree is hidden, links no longer breaking once you visit files (since without the change the files always got "/" appended and thus 404'd), and a differential quirk where it read "next step:" and that colon is a no no,
Test Plan: played around in diffusion and differential
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, chad
Maniphest Tasks: T2048, T2178
Differential Revision: https://secure.phabricator.com/D4169
Summary: wanted to play with some policy stuff as its been a bit. Turns out you can't edit questions so this is very silly "so long as you are a user you can view it" policy. also sorry if you have a diff or twelve out for this in your sandbox(es).
Test Plan: loaded up ponder and clicked about
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2113
Differential Revision: https://secure.phabricator.com/D4163
Summary:
When a user submits an action with no effect (like an empty comment, an "abandon" on an already-accepted revision, or a "close, resolved" on a closed task) we want to alert them that their action isn't effective. These warnings fall into two general buckets:
- User is submitting two or more actions, and some aren't effective but some are. Prompt them to apply the effective actions only.
- A special case of this is where the only effective action is a comment. We provide tailored text ("Post Comment") in this case.
- User is submitting one action, which isn't effective. Tell them they're out of luck.
- A special case of this is an empty comment. We provide tailored text in this case.
By default, the transaction editor throws when transactions have no effect. The caller can then deal with this, or use `PhabricatorApplicationTransactionNoEffectResponse` to provide a standard dialog that gives the user information as above. For cases where we expect transactions to have no effect (notably, "edit" forms) we just continue on no-effect unconditionally.
Also fix an issue where new, combined or filtered transactions would not be represented properly in the Ajax response (i.e., return final transactions from `applyTransactions()`), and translate some strings.
Test Plan:
- Submitted empty and nonempy comments in Macro and Pholio.
- Submitted comments with new and existing "@mentions".
- Submitted edits in both applications.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T912, T2104
Differential Revision: https://secure.phabricator.com/D4160
Summary:
Git adds it automatically.
I don't like this solution much because there could be other unknown fields appended to the end of the commit message which will break parsing.
Test Plan:
Reparsed commit ending with:
> Differential Revision: ...
> Conflicts: ...
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4157
Summary: actions are still a bit messy - unsatisfactory icons (T2013 will help!)
Test Plan: viewed diffs - they look good
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: chad, aran, Korvin
Maniphest Tasks: T2007
Differential Revision: https://secure.phabricator.com/D3904
Summary:
When possible, render application transactions via Ajax. Instead of reloading the page when the response returns, append new transactions to the transaction view.
Scroll the window to the new transactions, animate them in, and clear the form to make this interaction feel reasonable.
When editing transactions, fade them in but do not scroll to them (i.e., don't disrupt the user's position).
Test Plan: Edited and appended transactions via Ajax. Observed fade in animations and scroll behavior. Clicked anchors to verify proper anchor accounting.
Reviewers: vrana, btrahan, chad
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1960
Differential Revision: https://secure.phabricator.com/D4151
Summary:
Allows you to edit or delete comments in appplications which support ApplicationTransactions.
UI/UX stuff:
- The dialogs are rough but I want to do a dialog design pass more generally, @chad has some mocks.
- When you add new mentions via edit, they don't currently count as mentions. I'm not sure what I want to do about this.
- When you edit or delete a comment, we do not publish any notifications about it. I think this is reasonable.
- I didn't separate "delete" out versus "edit"; I assume it will be reasonably intuitive that deleting all the text deletes effectively deletes the comment. I also want to discourage deletion somewhat (we still show the transaction, just show that the comment has been deleted).
Test Plan:
Transaction view, note "Edit" and "Edited" links:
{F26914}
Edit view, has some design issues but I want to do a pass on dialogs in general:
{F26915}
History view:
{F26913}
Reviewers: vrana, btrahan, chad
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1082
Differential Revision: https://secure.phabricator.com/D4149
Summary: Publish feed stories, including from Pholio. Actual stories are somewhat garbage but it's all display-time; I'm going to do a pass on feed in general.
Test Plan: {F26832}
Reviewers: btrahan, chad, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2104
Differential Revision: https://secure.phabricator.com/D4140
Summary:
Split Pholio's transaction implementation into generic and application-specific parts. Moves us toward generic transactions, with support for:
- Editing and deleting comments.
- Setting visibility of individual comments (I'm not a fan of this feature but we'll see).
I want to move everything to a more generic piece of infrastructure but there's very little they can share right now so adding transactions to, e.g., Paste or Macros (T2157) means massive amounts of similar code.
Tons of work left to do here, but I think it basically works. Here's a screenshot:
{F26820}
Test Plan: Made transactions in Pholio.
Reviewers: btrahan, vrana, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2104
Differential Revision: https://secure.phabricator.com/D4136
Summary:
Support SMTP as the mailer and user could turn on SMTP authentication if needed.
Import PHPMailer as PHPMailerLite doesn't support SMTP.
Make class PhabricatorMailImplementationPHPMailerAdapter final.
Test Plan: N/A
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2139
Differential Revision: https://secure.phabricator.com/D4063
Summary:
Currently we have two different feed story classes, one for notifications and one for feed stories. However, we never actually do anything different with them -- the notification is always the same as the feed story, just shown differently. Delete the notification special case to reduce the amount of code we have supporting feed and notifications.
This is a precursor to @chad's notification designs.
Test Plan: Viewed notifications and feed, saw exactly the same result before and after the patch (but less, simpler code).
Reviewers: btrahan
Reviewed By: btrahan
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D4114
Summary:
basically did my darnedest to pull out a TwoUp rendering view. Made a base class for the rendering views with "old" and "new" terminology rather than "left" and "right.
Future revisions will finish cleaning up the terminology within the DifferentialChangesetParser itself and more of the ideas within T2009.
Test Plan: been playing with differential all day
Reviewers: epriestley
Reviewed By: epriestley
CC: vrana, chad, aran, Korvin
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D4117
Summary:
Add a basic breadcrumbs element, and implement it in Paste.
This needs some polish but is most of the way there.
Test Plan:
{F26443}
{F26444}
{F26445}
(This element is not visible on devices.)
Reviewers: chad
Reviewed By: chad
CC: aran, btrahan
Maniphest Tasks: T1960
Differential Revision: https://secure.phabricator.com/D4087
Summary:
- Adds `PhabricatorMenuItemView` which is a non-hacky object representing a single menu item.
- Adds `PhabricatorMenuView`, a collection of items.
- Deletes some busted/old interfaces full of garbage nonsense.
- Merges menu item styles from `aphront-side-nav-view-css` and `phabricator-nav-view-css`. These are old-style and new-style rules which got partially updated recently.
- The new-style menus have a darker background (#ececec) than the old-style menus (#f7f7f7) so some of the highlight/hover colors weren't visible. I shuffled them around but something or other might need further adjustment.
Test Plan: looked at every menu I could
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1960
Differential Revision: https://secure.phabricator.com/D4036
Summary: After D4034 there are no AphrontSideNavView callsites outside of AphrontSideNavFilterView.
Test Plan: Looked at about a million side navs.
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1960
Differential Revision: https://secure.phabricator.com/D4035
