Summary:
Ref T13286. To support request retries, allow the service lookup method to return an ordered list of structured service references.
Existing callsites continue to immediately discard all but the first reference and pull a URI out of it.
Test Plan: Ran `git pull` in a clustered repository with an "up" node and a "down" node, saw 50% serivce failures and 50% clean pulls.
Maniphest Tasks: T13286
Differential Revision: https://secure.phabricator.com/D20775
Summary:
Ref T13393. While doing a shard migration in the Phacility cluster, we'd like to stop writes to the migrating repository. It's safe to continue serving reads.
Add a simple maintenance mode for making repositories completely read-only during maintenance.
Test Plan: Put a repository into read-only mode, tried to write via HTTP + SSH. Viewed web UI. Took it back out of maintenance mode.
Maniphest Tasks: T13393
Differential Revision: https://secure.phabricator.com/D20748
Summary:
Ref T13339. If a search pattern matches more than once on a line, we currently render the line incorreclty, duplicating some of the text.
`substr()` is being called as though the third parameter was `end_offset`, but it's actually `length`. Correct the parameter.
Test Plan:
Before:
{F6676625}
After:
{F6676623}
Maniphest Tasks: T13339
Differential Revision: https://secure.phabricator.com/D20695
Summary:
Fixes T8830. Fixes T13364.
- The inability to destroy objects from the web UI is intentional. Make this clear in the messaging, which is somewhat out of date and partly reflects an earlier era when things could be destroyed.
- `bin/remove destroy` can't rewind time. Document expectations around the "put the cat back in the bag" use case.
Test Plan: Read documentation, clicked through both workflows.
Maniphest Tasks: T13364, T8830
Differential Revision: https://secure.phabricator.com/D20694
Summary: Ref T2784. These are lookin' pretty stable. Subclasses like `DiffusionGetLintMessagesConduitAPIMethod` have their warnings about unstable methods, so just remove this warning in the base class.
Test Plan: Loaded `/conduit`, observed lack of unstable warnings. Only unstable methods are now `diffusion.getlintmessages`, `diffusion.looksoon`, and `diffusion.updatecoverage`.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T2784
Differential Revision: https://secure.phabricator.com/D20651
Summary:
See <https://discourse.phabricator-community.org/t/cannot-audit-a-git-commit/2848>. In D20581, I made some audit behavior dependent upon identities, but the actual edit flow doesn't load them. This can cause us to raise an "attach identities first" exception in the bowels of the edit workflow and trigger unexpected behavior at top level.
Load identities when editing a commit so that the transaction flows have access to identity information and can use it to figure out if a user is an author, etc.
Test Plan:
- As an auditor, applied an "Accept Commit" action to an open audit after D20581.
- Before patch: accept no-ops internally since the preconditions throw.
- After patch: accept works properly.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20612
Summary:
Fixes T13312. Currently, {nav Manage > Branches} has a list of branches on the same page. This has a few minor issues:
- Pager is at the top (see T13312), which is weird.
- "Default" icon is mystery meat.
- Table is kind of pointless/redundant in general?
Previously, this table had more information about technical status of each branch (autoclose/track/publish) but most of these details have been simplified/eliminated, and the main "Branches" view now has more information than it did before.
Get rid of this and just link to the main view.
Test Plan: Viewed "Branches" in UI, saw a link to the main view instead of a weird table.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13312
Differential Revision: https://secure.phabricator.com/D20584
Summary:
Fixes T13309. If you void the warranty on a repository on disk and turn it into a shallow clone, Phabricator currently can't serve it.
We don't support hosting shallow working copies, but we should still parse and proxy the protocol rather than breaking in a mysterious way.
Test Plan:
- Created a shallow working copy with `mv X X.full; git clone --depth Y file://.../X.full X` in the storage directory on disk.
- Cloned it with `git clone <uri>`.
- Deleted all the refs inside it so the wire only has "shallow" frames; cloned it.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13309
Differential Revision: https://secure.phabricator.com/D20577
Summary:
Depends on D20580. Fixes T13311. When we choose which actions to show a user, we can either show them "auditor" actions (like "raise concern") or "author" actions (like "request verification").
Currently, we don't show "author" actions if you're the author of the commit via an identity mapping, but we should. Use identity mappings where they exist.
(Because I've implemented `getEffectiveAuthorPHID()` in a way that requires `$data` be attached, it's possible this will make something throw a "DataNotAttached" exception, but: probably it won't?; and that's easy to fix if it happens.)
Test Plan:
See D20580. As `@alice`, viewed the commit in the UI.
- Before: got auditor actions presented to me.
- After: got author actions.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13311
Differential Revision: https://secure.phabricator.com/D20581
Summary:
Ref T13290. Ref T13291. Now that a full URI is a "mention", the full URI in "Differential Revision: ..." also triggers a mention.
Stop it from doing that, since these mentions are silly/redundant/unintended.
The API here is also slightly odd; simplify it a little bit to get rid of doing "append" with "get + append + set".
Test Plan: Used `bin/repository reparse --publish` to republish commits with "Differential Revision: ..." and verified that the revision PHID was properly dropped from the mention list.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13291, T13290
Differential Revision: https://secure.phabricator.com/D20544
Summary: Depends on D20538. Ref T13291. We now recognize full source URIs, but encoding full URIs isn't super human-friendly and we can't do stuff like relative links with them. Add `{src ...}` as a way to get to this behavior that supports options and more flexible syntax.
Test Plan: {F6463607}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13291
Differential Revision: https://secure.phabricator.com/D20539
Summary:
Depends on D20530. Ref T13291. When users paste links to files in Diffusion into remarkup contexts, identify them and specialize the rendering.
When the URIs are embedded with `{...}`, parse them in more detail.
This is a lead-up to a `{src ...}` rule which will use the same `View` but give users more options to customize presentation.
Test Plan: {F6463580}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13291
Differential Revision: https://secure.phabricator.com/D20538
Summary:
See PHI1268. We currently do some weird width handling when rendering Diffusion readmes in a document directory view.
I think this came from D12330, which used `PHUIDocumentViewPro` to change the font, but we later reverted the font and were left with the `DocumentView`. Other changes after that modified `DocumentView` to have fixed-width behavior, but it doesn't make much sense here since the content panel is clearly rendered full-width.
Today, the `DocumentView` is a more structural element with methods like `setCurtain()`. Just get rid of it to simplify things, at least as a first step.
Test Plan:
Before:
{F6463493}
After:
{F6463492}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20536
Summary:
See PHI1225. Ref T13277. In Diffusion, show "default", "permanent", or "not permanent" when looking at branches.
For repositories with 100 or fewer branches, put default and permanent branches on top.
Test Plan: {F6426814}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: leoluk
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20493
Summary: Ref T13276. This edge is pointed the wrong way. Point it the right way.
Test Plan: Will verify production works better.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13276
Differential Revision: https://secure.phabricator.com/D20490
Summary:
Depends on D20469. Ref T13276. See PHI1159. See PHI953. See PHI901.
Allow Herald to detect when "arc land" would (or did) warn users about failed or ongoing builds. This respects the "Warn on Landing" build plan behavior.
To accomplish this:
- When we close a revision, set a "wrong build state" flag if it lands in the wrong build state.
- If the revision is closed when we hit Herald, look for the flag.
- If not (common for push rules, can happen for commit rules if we race against the revision update worker), hit Harbormaster ourselves and check the current state.
Test Plan:
- Wrote a "Require Green" rule.
- Ran it against various commits with various build states (good, not good).
- Fiddled with "Warn on Landing" and saw the effect in rule evaluation.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13276
Differential Revision: https://secure.phabricator.com/D20470
Summary:
Depends on D20468. Ref T13276. See PHI1008.
When a commit or revision "reverts <hash>", and that's the hash of a commit which has a revision, also write a "reverts" edge to the revision.
Test Plan:
Created "reverts X" objects for:
- a revision;
- a commit;
- a commit with a revision (both got marked properly).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13276
Differential Revision: https://secure.phabricator.com/D20469
Summary:
Depends on D20467. Ref T13277. Currently, the "MessageParserWorker" writes this property on commits, then Herald and Audit both read it.
Make them share code so this property has one writer and one reader. This property isn't great, but at least now the badness is hidden.
Currently, we can't just use edges because they may not have been written yet. I am likely to just do this, soon:
- Just write the edges (in "MessageParserWorker").
- Hide the edges from mail.
However, we'll sort-of lose the "revisionMatchData" explanation thing if I do that. Maybe this is fine? But when commits match because hashes match, it legitimately isn't obvious.
For now, just reduce the amount of harm/badness here.
Test Plan:
- Ran `bin/repository reparse --publish ...`.
- Ran a Herald "Audit" rule using the "Accepted Differential revision" field.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20468
Summary:
Depends on D20465. Ref T13277. Currently, when a commit is unpublished, we put a single line about it on the "Edit Commit" page. This is pretty much impossible to find.
Move it to the main page. This treatment is more big/bold than I'd probably like to end up, but we should probably overshoot on the explanatory text until users get used to this behavior.
Also, allow searching for only published / unpublished commits.
Test Plan: {F6395705}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20466
Summary:
Depends on D20464. Ref T13277. Broadly:
- Move all the "should publish X" and "why aren't we publishing X" stuff to a separate class (`PhabricatorRepositoryPublisher`).
- Rename things to be more consistent with modern terminology ("Publish", "Permanent Refs").
Test Plan:
This could use some trial-by-fire on `secure`, but:
- Grepped for all symbols.
- Viewed various commits.
- Reparsed commits.
- Here's a commit with an explanation:
{F6394569}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20465
Summary: Depends on D20463. Ref T13277. This flag was added some time before 2015 and I don't think I've ever used it. Just get rid of it.
Test Plan: Grepped for `force-autoclose`, `forceAutoclose`, `AUTOCLOSE_FORCED`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20464
Summary:
Depends on D20462. Ref T13276. Currently, the "Message" parser also updates related tasks and revisions when a commit is published.
For PHI1165, which ran into a race with message parsing, I originally believed we needed to separate this logic and lock + yield to avoid the race. D20462 provides what is probably a better approach for avoiding the race.
Still, I think separating these "update related revisions" and "updated related tasks" chunks into separate workers is a net improvement. There may still be some value in doing lock + yield in the future to deal with other issues, and when we occasionally run into problems with pulling a diff out of the repository to update the revision (usually because the diff is too big) this isolates the problem better and allows the commit to import.
I think the only thing to watch out for here is that Herald may now run before the revision and commit are attached to one another. This is fine for all current Herald rules, we just need to be mindful in implementing new rules.
Test Plan: Used `bin/repository reparse --message` on various commits, including commits that close revisions and close tasks.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13276
Differential Revision: https://secure.phabricator.com/D20463
Summary: Depends on D20457. Ref T13276. Kill all remaining callers to this method and delete it.
Test Plan:
- Grepped for `loadIDsByCommitPHIDs`.
- Viewed blame again to make sure I didn't break it.
- Viewed "History" view for commits with revisions.
- Viewed "Graph" view for commits with revisions.
- Viewed "Merged Commits" table for commits with revisions.
- Viewed "Compare" table for commits with revisions.
- Viewed "Repository" main page history table for commits with revisions.
- Grepped for `linkRevision`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13276
Differential Revision: https://secure.phabricator.com/D20458
Summary:
Ref T13276. Differential has a pre-edge "TABLE_COMMIT" with about a half-dozen weird callers I'd like to get rid of.
Move blame to use edges instead. (Bonus: this makes blame respect edge edits in the UI.)
Since there are some more callers to clean up this code may move into some "RelatedObjectQueryThing" class or something, but I'm taking it one step at a time for now.
Test Plan: {F6394106}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13276
Differential Revision: https://secure.phabricator.com/D20457
Summary:
Ref T13280. In D20421, I changed our observe strategy to `git fetch <uri>` in all cases.
This doesn't work in an ancient, non-bare repository if `master` is checked out and `master` is also fetch: `git` refuses to overwrite the local ref unless we pass `--update-head-ok`. Pass this flag.
Also, remove some code which examines branches and tags in a special way for non-bare working copies. The old `git fetch <origin>` code without explicit revsets meant that `refs/remotes/orgin/heads/xyz` got updated instead of `refs/heads/xyz`. We now update our local refs in all cases (bare and non-bare) so we can throw away this special casing.
Test Plan:
- Replaced a modern bare working copy with a non-bare working copy by explicitly using `git clone` without `--bare`.
- Ran `bin/repository update`, hit the `--update-head-ok` error. Applied the patch, got a clean update.
- Used the "repository.branchquery" API method...
- ...with "contains" to trigger the "git branch" case. Got identical results after removing the special casing.
- ...without "contains" to trigger the "low level ref" case. Got identical results after removing the special casing.
- Grepped for `isWorkingCopyBare()`. The only remaining callsites deal with hook paths, and genuinely need to be specialized.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13280
Differential Revision: https://secure.phabricator.com/D20450
Summary:
Depends on D20433. Ref T13277. Since "Autoclose" no longer exists, update the documentation.
Currently, this documentation focuses a lot on troubleshooting because users historically had a lot of trouble with figuring out why things were or were not autoclosing. I haven't seen any real confusion about this in years, so I suspect we may have improved the import pipeline and/or UI to make this less of a problem.
It's also possible that this document "fixed" the problem, but usually I expect a documentation fix to not affect the frequency of reports, just make them easier to resolve, so I doubt it.
If unclear things remain //and// documentation really did fix it, maybe we can fix the issues. Or we can just put the troubleshooting documentation back.
Test Plan: Read documentation.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20434
Summary:
Depends on D20432. Ref T13277. Fixes T12967. Removes some "Track Only" hints and warns that the feature is deprecated in favor of "Permanent Refs" and "Fetch Only".
(This "fixes" T12967 by mooting it.)
Test Plan: Viewed "branches" sectino of the manage UI, edited "braches" section of a repository.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277, T12967
Differential Revision: https://secure.phabricator.com/D20433
Summary:
Depends on D20426. Ref T13277. The new behavior is to fire Herald only once a commit becomes reachable from a permanent ref (previously, an "Autoclose" branch).
That means that every "Commit" Herald rule implicitly has this field as a condition, and it no longer does anything.
Test Plan: Wrote a Herald rule, saw this as an option in the "Deprecated" section.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20427
Summary:
Depends on D20424. Ref T13277. Now that the "Actions" panel only has one item ("Publishing"), just move it to the "Basics" panel.
Update the UI to show active/publishing status more clearly and relate them to one another and importing state.
Test Plan: {F6378087}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20425
Summary:
Depends on D20423. Ref T13277. Repositories currently have separate toggles for "Autoclose" and "Publishing".
Merge the "Autoclose" toggle into the "Publishing" toggle. I'm unaware of any valid use case for enabling one but not the other.
(This doesn't fix all the documentation, yet.)
Test Plan: Edited a repository, saw only one publishing option.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20424
Summary:
Depends on D20422. Ref T13277. Currently, "track only", "publish", and "autoclose" are three separate ideas. I'd like to generally merge them into a more natural idea called "permanent refs".
Since "Autoclose" effectively now controls both "autoclose" and "publish", rename it.
This doesn't rename all the methods or internals, and the documentation needs an update, but it renames most of the UI-facing stuff.
(You also can only specify branches as "Permanent Refs" today, but we may let you specify tags and other arbitrary refs in the future.)
Test Plan: Grepped, poked around the UI, saw UI show "Permanent" / "Permanent Refs" more often and "Autoclose" less.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20423
Summary:
Depends on D20421. Ref T13277. I'd generally like to move away from "Track Only".
Some of the use cases for "Track Only" (or adjacent to "Track Only") are better resolved with "Fetch Rules" -- basically, rules to fetch only some subset of refs from the observed remote.
Add configurable "Fetch Rules" for Git repositories. For example, if you only want to fetch `master`, you can now speify:
```
refs/heads/master
```
If you only want to fetch branches and tags, you can use:
```
refs/heads/*
refs/tags/*
```
In theory, this is slightly less powerful in the general case than "Track Only", but gives us better behavior in some cases (e.g., when the remote has 50K random temporary branches). In practice, I think this and a better "Autoclose Only" will let us move away from "Track Only", get default behavior which is better aligned with what users actually expect, and dodge all the "track tags/refs" questions.
Test Plan: Configured repositories with "Fetch Refs" rules, used `bin/repository pull --verbose --trace ...` to run pulls, saw expected pull/fetch behavior.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20422
Summary:
Depends on D20418. Ref T13277. Fixes T11314.
Currently, when you push commits to some arbitrary ref or tag (like `refs/pull/123` on GitHub, `refs/tags/phabricator/diff/123` on Phabricator, or `refs/changes/whatever` on Gerrit), we do not "autoclose" related objects. This means that we don't process `Ref T123` to create links to tasks, and don't process `Differential Revision: xyz` to close revisions.
However, we //do// still publish these commits. "Publish" means: trigger audits, publish feed stories, and run Herald rules.
- Stop publishing these commits.
- In the UI, show these commits as "Not Permanent" with a note that they are "Not [on any permanent branch]."
These commits will publish and autoclose if they ever become reachable from an "autoclose" ref (most commonly, if they are later merged to "master").
Test Plan:
- Pushed a commit to `refs/tags/quack`.
- Before: got a feed story.
- After: no feed story, UI shows commit as "Not Permanent".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277, T11314
Differential Revision: https://secure.phabricator.com/D20419
Summary:
Depends on D20381. Ref T8093. This makes minor improvements to the protocol proxy to handle cases where we add, remove, or replace refs and may need to move the "capabilities" section.
Rather than invoking a callback on every ref: parse the whole ref list into a data structure, mutate it if necessary (in a future diff), then dump it back into wire format.
This allows us to shift the capabilities data (which needs to be coupled with the first ref) around if we modify the first ref, and reorder the reflist alphabetically like git does.
When the server has no refs, Git sends no capabilities data. This is easy to emulate, just surprising.
Test Plan:
Tested the cases not covered by D20381:
- Fetching where the fetch actually fetches data.
- `ls-remote` when we hide the first ref (capabilities data properly moves to the first visible ref).
- `ls-remote` when the remote is empty (we just drop the capabilities frame completely).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T8093
Differential Revision: https://secure.phabricator.com/D20436
Summary:
Depends on D20380. Ref T8093. When prototypes are enabled, inject a (hopefully?) no-op proxy into the Git wire protocol.
This proxy decodes "git upload-pack" and allows the list of references to be rewritten, in a similar way to how we already proxy the Subversion protocol to rewrite URIs and proxy the Mercurial protocol to distinguish between read and write operations.
The piece we care about comes at the beginning, and looks like this:
```
<frame-length><ref-hash> <ref-name>\0<server-capabilities>\n
<frame-length><ref-hash> <ref-name>\n
<frame-length><ref-hash> <ref-name>\n
...
<0000>
```
We can add, remove, or modify this section to make it appear that the server has different refs than the refs that exist on disk.
Things I have tried:
- `git ls-remote`
- `git ls-remote` where the server hides some refs.
- `git fetch` where the fetch is a no-op.
Things I have not tried:
- `git fetch` where the fetch is not a no-op.
- Tricking things into doing protocol v2. Or: I tried this, I wasn't successful. In v2, additional "\0" tricks are used to hide data in the capabilities, I think?
- `git ls-remote` where we rewrite/hide the first ref in the list, and need to move the capabilities frame elsewhere.
- `git ls-remote` where the server has no refs at all, or we remove every ref.
So the "interesting" piece of this works, but it almost certainly needs some cleanup to survive interaction with the real world.
Test Plan: See above.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T8093
Differential Revision: https://secure.phabricator.com/D20381
Summary:
Ref T8093. Support dumping the protocol bytes to a side channel logfile, as a precursor to parsing the protocol and rewriting protocol frames to virtualize refs.
The protocol itself is mostly ASCII text so the raw protocol bytes are pretty comprehensible.
Test Plan:
{F6363221}
{F6363222}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T8093
Differential Revision: https://secure.phabricator.com/D20380
Summary:
Depends on D20419. Ref T13277. Fixes T8936. Fixes T9383. Fixes T12300. When you push arbitrary refs to Phabricator, the push log currently complains if those refs are not tags or branches.
Upstream Git now features "notes", and there's no reason to prevent writes to arbitrary refs, particularly beause we plan to start using them soon (see T13278).
Allow these writes as affecting raw refs.
Test Plan:
- Pushed an arbitrary ref.
- Pushed some Git notes.
- Wrote a Herald ref rule, saw "ref" in the dropdown.
{F6376492}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277, T8936, T9383, T12300
Differential Revision: https://secure.phabricator.com/D20420
Summary:
Depends on D20412. See PHI1147.
- Index the targets of "Add Reviewer", "Add Blocking Reviewer", "Add Auditor", "Add Subscriber", and "Remove Subscriber" Herald rules. My major goal is to get Owners packages. This will also hit projects/users, but we just don't read those edges (for now, at least).
- Add a "Related Herald Rules" panel to Owners Package pages.
- Add a migration to reindex Herald rules for the recent build plan stuff and this, now that such a migration is easy to write.
Test Plan:
Ran migration, verified all rules reindexed.
{F6372695}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D20413
Summary:
Fixes T13270. In Diffusion, the "Code" tab is linked in a weird way that isn't consistent with the other tabs.
Particularly, if you navigate to `x/y/z/` and toggle between the "Branches" and "History" tabs (or other tabs), you keep your path. If you click "Code", you lose your path.
Instead, retain the path, so you can navigate somewhere and then toggle to/from the "Code" tab to get different views of the same path.
Test Plan: Browed into a repository, clicked "History", clicked "Code", ended up back in the place I started.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13270
Differential Revision: https://secure.phabricator.com/D20323
Summary:
Depends on D20291. Ref T13259. Move all the simple cases (where paging depends only on the partial object and does not depend on keys) to a simple wrapper.
This leaves a smaller set of more complex cases where we care about external data or which keys were requested that I'll convert in followups.
Test Plan: Poked at things, but a lot of stuff is still broken until everything is converted.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13259
Differential Revision: https://secure.phabricator.com/D20292
Summary:
See PHI1123. The key on this table is `<resource, type, code>` but we currently query for only `<type, code>`. This can't use the key.
Constrain the query to the resource we expect (the repository) so it can use the key.
Test Plan: Pushed files using LFS. See PHI1123 for more, likely.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20261
Summary:
Ref T13121. When you connect to a host with SSH, don't already know the host key, and don't have strict host key checking, it prints "Permanently adding host X to known hosts". This is super un-useful.
In a perfect world, we'd probably always have strict host key checking, but this is a significant barrier to configuration/setup and I think not hugely important (MITM attacks against SSH hosts are hard/rare and probably not hugely valuable). I'd imagine a more realistic long term approach is likely optional host key checking.
For now, try using `LogLevel=ERROR` instead of `LogLevel=quiet` to suppress this error. This should be strictly better (since at least some messages we want to see are ERROR or better), although it may not be perfect (there may be other INFO messages we would still like to see).
Test Plan:
- Ran `ssh -o LogLevel=... -o 'StrictHostKeyChecking=no' -o 'UserKnownHostsFile=/dev/null'` with bad credentials, for "ERROR", "quiet", and default ("INFO") log levels.
- With `INFO`, got a warning about adding the key, then an error about bad credentials (bad: don't want the key warning).
- With `quiet`, got nothing (bad: we want the credential error).
- With `ERROR`, got no warning but did get an error (good!).
Not sure this always gives us exactly what we want, but it seems like an improvement over "quiet".
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13121
Differential Revision: https://secure.phabricator.com/D20240
Summary:
Depends on D20181. Depends on D20182. Fixes T3498. Ref T13161. My claim, at least, is that D20181 can be tweaked to be good enough to throw away this "feature" completely.
I think this feature was sort of a mistake, where the ease of access to `diff -bw` shaped behavior a very long time ago and then the train just ran a long way down the tracks in the same direction.
Test Plan: Grepped for `whitespace`, deleted almost everything. Poked around the UI a bit. I'm expecting the whitespace changes to get some more iteration this week so I not being hugely pedantic about testing this stuff exhaustively.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T3498
Differential Revision: https://secure.phabricator.com/D20185
Summary: Ref T13250. See D20149. In a number of cases, we use `setQueryParams()` immediately after URI construction. To simplify this slightly, let the constructor take parameters, similar to `HTTPSFuture`.
Test Plan: See inlines.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13250
Differential Revision: https://secure.phabricator.com/D20151
Summary: See D20136. This method is sort of inherently bad because it is destructive for some inputs (`x=1&x=2`) and had "PHP-flavored" behavior for other inputs (`x[]=1&x[]=2`). Move to explicit `...AsMap` and `...AsPairList` methods.
Test Plan: Bit of an adventure, see inlines in a minute.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20141
