Summary: Swap to DiffusionCommitQuery, other minor cleanup.
Test Plan: Viewed page, forced error view and looked at it.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7454
Summary: See @scottmac's reply in T3982. It looks like his email client uses the standard quote string, but includes it in the quoted block.
Test Plan: Added a failing unit test, made it pass.
Reviewers: btrahan
Reviewed By: btrahan
CC: scottmac, aran
Differential Revision: https://secure.phabricator.com/D7440
Summary: I'm planning to add more detailed info to Diffusion itself, but catch the big issue here.
Test Plan: Hit config issue locally, then resolved it.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7439
Summary: The new "importStatus" property provides a much stronger and more consistent version of this flag. The only callsite was removed by D7452.
Test Plan: Used `grep` to check for callsites and found none.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7453
Summary:
Ref T2716.
- Serve from `DiffusionCommitQuery`, not `PhabricatorAuditCommitQuery` (which should probably die).
- Fix logic for `limit`, which incorrectly failed to display the "Showing %d branches." text.
- Clean up things a touch.
- I didn't end up actually needing `needCommitData()`, but left it in there since I think it will be needed soon.
- Removed a "TODO" because I don't remember what "etc etc" means.
Test Plan: Looked at branches in several repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2716
Differential Revision: https://secure.phabricator.com/D7451
Summary: If you load Diffusion between a repository being pulled and discovered, you can end up with a valid commit reference that hasn't been discovered yet. Don't fatal.
Test Plan: Saw somewhat-helpful error page instead of fatal.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7448
Summary: Ref T2230. This cleans up D7442, by using `git for-each-ref` everywhere we can, in a basically reasonable way.
Test Plan:
In bare and non-bare repositories:
- Ran discovery with `bin/repository discover`;
- listed branches on `/diffusion/X/`;
- listed tags on `/diffusion/X/`;
- listed tags, branches and refs on `/diffusion/rXnnnn`.
Reviewers: btrahan, avivey
Reviewed By: avivey
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7447
Summary: Fixes T4035. I removed these two "remote/" things in rP59922b7, but we need them for non-bare repositories. Without them, the commands work and run fine and the output looks OK, but the results may not reflect the correct information (e.g., the log shows the working copy's master, which may not be in the same state as origin/master). I'm going to generally clean this up, but unbreak it for now.
Test Plan: Viewed bare and non-bare repositories in Diffusion, got accurate history.
Reviewers: btrahan, hach-que
Reviewed By: btrahan
CC: aran, mbishopim3
Maniphest Tasks: T4035
Differential Revision: https://secure.phabricator.com/D7445
Summary: Makes Legalpad a little easier to grok.
Test Plan: View Document
Reviewers: epriestley, btrahan
Reviewed By: btrahan
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7460
Summary: The warning panel on large commits in diffusion was being overrun with other styles. Fixes T3952
Test Plan: test on a large commit
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3952
Differential Revision: https://secure.phabricator.com/D7456
Summary: We don't have a section header on `/diffusion/X/` for descriptions right now. Add one to improve consistency.
Test Plan: Looked at a repository.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7449
Summary: Helps make it seem more q/a like and consistent.
Test Plan: Look at question
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7450
Summary:
Ref T2230. Although all the non-bare commands //run// fine in bare repos, not all of them do exactly the same thing.
This could use further cleanup, but at least get it working again for now.
Test Plan: Ran `bin/repository pull`, `bin/repository discover`, viewed Diffusion (looked at branch table), viewed a commit (looked at "Branches"), for bare and non-bare git repos.
Reviewers: avive, btrahan, avivey
Reviewed By: avivey
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7442
Summary: Updates the review status list to align better inside property lists. Alsu uses the default colors a bit more. This removes an overflow hidden on the value side, but that shouldnt cause any issues, given it has plenty of space.
Test Plan: tested differential and audit, highlighted and not.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7441
Summary:
Relocated files aren't treated as newly created files by the worker. This
can lead to the worker trying to look up information about deleted files
in the wrong location.
Test Plan: See T4030
Reviewers: #blessed_reviewers, epriestley
Reviewed By: epriestley
CC: epriestley, aran
Maniphest Tasks: T4030
Differential Revision: https://secure.phabricator.com/D7432
Summary: Fixes T4028, makes the table a bit easier to read and navigate changesets.
Test Plan: Tested a big history, back to original and latest.
Reviewers: epriestley, btrahan
CC: Korvin, epriestley, aran
Maniphest Tasks: T4028
Differential Revision: https://secure.phabricator.com/D7438
Summary:
Fixes T3619. These URIs are valid:
git@domain.com:/path (Git SCP-style implicit SSH)
ssh://git@domain.com/path (Explicit SSH)
This URI, arrived at by adding "ssh://" to the front of an SCP-style URI, is not:
ssh://git@domain.com:/path
Detect URIs in this form and reject them. See T3619.
Test Plan:
{F75486}
Also set some valid URIs.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3619
Differential Revision: https://secure.phabricator.com/D7431
Summary:
This doesn't really impact anything very much, but is a little cleaner than cloning repositories with a working copy. It's somewhat important for allowing pushes, because you can't push to a checked-out branch.
Mercurial has a similar option (`--noupdate`) but leave that alone for now.
The origin stuff was mostly for sanity/explicitness purposes -- I believe it's safe to remove in all non-ridiculous cases. Git fails with it in bare repositories (it automatically creates an `origin`, but doesn't create the local refs for it, or something).
Test Plan: Nuked a repo, re-cloned it, pulled and updated it several times. Browsed both bare and non-bare repos in Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7430
Summary:
Fixes T3217. Ref T776. Ref T1493. Broadly, this introduces a mechanism which works like this:
- When a repository is created, we set an "importing" flag.
- After discovery completes, we check if a repository has no importing commits. Basically, this is the first time we catch up to HEAD.
- If we're caught up, clear the "importing" flag.
This flag lets us fix some issues:
- T3217. Currently, when you import a new repository and users have rules like "Email me on every commit ever" or "trigger an audit on every commit", we take a bunch of publish actions. Instead, implicitly disable publishing during import.
- An imported but un-pulled repository currently has an incomprehensible error on `/diffusion/X/`. Fix that.
- Show more cues in the UI about importing.
- Made some exceptions more specific.
Test Plan:
This is the new screen for a completely new repo, replacing a giant exception:
{F75443}
- Created a repository, saw it "importing".
- Pulled and discovered it.
- Processed its commits.
- Ran discovery again, saw import flag clear.
- Also this repository was empty, which hit some of the other code.
This is the new "parsed empty repository" UI, which isn't good, but is less broken:
{F75446}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, hach-que
Maniphest Tasks: T3607, T1493, T776, T3217
Differential Revision: https://secure.phabricator.com/D7429
Summary:
Fixes T3416. Fixes T1733.
- Adds a flag to the commit table showing whether or not we have parsed it.
- The flag is set to `0` initially when the commit is discovered.
- The flag is set to `1` when the changes are parsed.
- The UI can now use the flag to distinguish between "empty commit" and "commit which we haven't imported changes for yet".
- Simplify rendering code a little bit.
- Fix an issue with the Message parser for empty commits.
- There's a key on the flag so we can do `SELECT * FROM repository_commit WHERE repositoryID = %d AND importStatus = 0 LIMIT 1` soon, to determine if a repository is fully imported or not. This will let us improve the UI (Ref T776, Ref T3217).
Test Plan:
- Ran `bin/storage upgrade -f`.
- Created an empty commit.
- Without the daemons running, ran `bin/repository pull GTEST` and `bin/repository discover GTEST`.
- Viewed web UI to get the first screenshot ("Still Importing...").
- Ran the message and change steps with `scripts/repository/reparse.php`.
- Viewed web UI to get the second screenshot ("Empty Commit").
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T776, T1733, T3416, T3217
Differential Revision: https://secure.phabricator.com/D7428
Summary:
- Don't try to pull hosted repos.
- Also, fix the `--verbose` + `--trace` interaction for `bin/repository`.
- Also, fix a couple of unit tests which got tweaked earlier.
Test Plan:
$ ./bin/repository pull GTEST --verbose
Pulling 'GTEST'...
Repository "GTEST" is hosted, so Phabricator does not pull updates for it.
Done.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7427
Summary: We've had support for this for a long time, but it was conditional on config. Since it more-or-less actually does something now, just enable it unconditionally.
Test Plan: Settings -> SSH Public Keys
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7426
Summary: Looks like this is pretty straightforward; same as the reads except mark it as needing PUSH.
Test Plan: Ran `git push`, pushed over SSH to a hosted repo.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7425
Summary: Like D7423, but for SSH.
Test Plan: Ran `git clone ssh://...`, got a clone.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7424
Summary: Mostly ripped from D7391. No writes yet.
Test Plan: Ran `git clone` against a local over HTTP, got a clone.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7423
Summary:
- Add web UI for configuring SSH hosting.
- Route git reads (`git-upload-pack` over SSH).
Test Plan:
>>> orbital ~ $ git clone ssh://127.0.0.1/
Cloning into '127.0.0.1'...
Exception: Unrecognized repository path "/". Expected a path like "/diffusion/X/".
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/X/
Cloning into 'X'...
Exception: No repository "X" exists!
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/MT/
Cloning into 'MT'...
Exception: This repository is not available over SSH.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/P/
Cloning into 'P'...
Exception: TODO: Implement serve over SSH.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7421
Summary:
Fixes T2229. This sets the stage for a patch similar to D7417, but for SSH. In particular, SSH 6.2 introduced an `AuthorizedKeysCommand` directive, which lets us do this in a mostly-reasonable way without needing users to patch sshd (if they have a recent enough version, at least).
The way the `AuthorizedKeysCommand` works is that it gets run and produces an `authorized_keys`-style file fragment. This isn't ideal, because we have to dump every key into the result, but should be fine for most installs. The earlier patch against `sshd` passes the public key itself, which allows the script to just look up the key. We might use this eventually, since it can scale much better, so I haven't removed it.
Generally, auth is split into two scripts now which mostly do the same thing:
- `ssh-auth` is the AuthorizedKeysCommand auth, which takes nothing and dumps the whole keyfile.
- `ssh-auth-key` is the slightly cleaner and more scalable (but patch-dependent) version, which takes the public key and dumps only matching options.
I also reworked the argument parsing to be a bit more sane.
Test Plan:
This is somewhat-intentionally a bit obtuse since I don't really want anyone using it yet, but basically:
- Copy `phabricator-ssh-hook.sh` to somewhere like `/usr/libexec/openssh/`, chown it `root` and chmod it `500`.
- This script should probably also do a username check in the future.
- Create a copy of `sshd_config` and fix the paths/etc. Point the KeyScript at your copy of the hook.
- Start a copy of sshd (6.2 or newer) with `-f <your config file>` and maybe `-d -d -d` to foreground and debug.
- Run `ssh -p 2222 localhost` or similar.
Specifically, I did this setup and then ran a bunch of commands like:
- `ssh host` (denied, no command)
- `ssh host ls` (denied, not supported)
- `echo '{}' | ssh host conduit conduit.ping` (works)
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2229, T2230
Differential Revision: https://secure.phabricator.com/D7419
Summary:
Mostly ripped from D7391, with some changes:
- Serve repositories at `/diffusion/X/`, with no special `/git/` or `/serve/` URI component.
- This requires a little bit of magic, but I got the magic working for Git, Mercurial and SVN, and it seems reasonable.
- I think having one URI for everything will make it easier for users to understand.
- One downside is that git will clone into `X` by default, but I think that's not a big deal, and we can work around that in the future easily enough.
- Accept HTTP requests for Git, SVN and Mercurial repositories.
- Auth logic is a little different in order to be more consistent with how other things work.
- Instead of AphrontBasicAuthResponse, added "VCSResponse". Mercurial can print strings we send it on the CLI if we're careful, so support that. I did a fair amount of digging and didn't have any luck with git or svn.
- Commands we don't know about are assumed to require "Push" capability by default.
No actual VCS data going over the wire yet.
Test Plan:
Ran a bunch of stuff like this:
$ hg clone http://local.aphront.com:8080/diffusion/P/
abort: HTTP Error 403: This repository is not available over HTTP.
...and got pretty reasonable-seeming errors in all cases. All this can do is produce errors for now.
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7417
Summary:
Basically straight from D7391. The differences are basically:
- Policy stuff is all application-scope instead of global-scope.
- Made a few strings a little nicer.
- Deleted a bit of dead code.
- Added a big "THIS DOESN'T WORK YET" warning.
Test Plan: See screenshots.
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7416
Summary: No editing or view yet, just adds the schema and a policy default. Part of D7391.
Test Plan: `bin/storage upgrade`
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7415
Summary: Ref T2231. Get rid of the old create controller and make the button go to the new stuff instead. This will eventually get cleaned up more, but I don't have a clear plan for Arcanist Projects yet.
Test Plan: Clicked button, hit new workflow.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7414
Summary:
Ref T2231. This:
- Activates the new multi-step workflow, and exposes it in the UI.
- Adds "can create", "default view" and "default edit" capabilities.
- Provides a default value for `repository.default-local-path` and forces repositories into it by default. It's still editable, but Phabricator gets it correct (for some definition of correct) by default now.
Test Plan: Created some new repositories with the new workflow.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1286, T2231
Differential Revision: https://secure.phabricator.com/D7413
Summary:
Ref T2231. I didn't port these options over, so they're still supported but have no edit UI:
- Pull Frequency (confusing/not useful, I think?)
- Default Owners Path (probably used only by Facebook and only in the E repository)
- Show user in public repository URL (probably mostly obsolete with hosting?)
We can add those back if users notice, but they seem like the three least useful options so I'm going to see if we can get away with removing them.
Test Plan: Clicked "Edit" from Repositories, got kicked into the nice new Diffusion edit UI instead of the old one.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7410
Summary: Ref T2231. This just moves the "Delete" dialog from Repositories to Diffusion. This dialog just shows instructions and isn't interesting.
Test Plan: {F75093}
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7412
Summary: Ref T2231. Use status info element instead of tags.
Test Plan: {F75092}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7411
Summary: Fixes T1286. Ref T2231. See previous diffs; same as the others but does "Local Path".
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1286, T2231
Differential Revision: https://secure.phabricator.com/D7409
Summary: This adds a set of plain (blueish) icons for use instead of black.
Test Plan: Photoshop
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7434
Summary: I changed some CSS here that was not intended.
Test Plan: Reload a few Diffs, no bottom padding at last diff now.
Reviewers: epriestley, btrahan
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7433
Summary: Adds consistent spacing, color to this interactive box. Also, I changed it to yellow, if its too much lemme know but feels ok.
Test Plan: tested new colors in differential
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7422
Summary: This fixes the sprite for remarkup and does some minor tweaks for transactions (so Differential looks a little more like timeline)
Test Plan: tested remarkup, differential
Reviewers: epriestley, btrahan
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7418
Summary: Ref T2231. Crumbs in the Diffusion edit workflow are a bit wonky, with stuff like "rP (master)" which isn't very useful and no link back to the main "Edit" page. Make them consistent across all the screens.
Test Plan: Loaded a bunch of these screens and saw sane crumbs on all of them.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7407
Summary:
@chad is hitting an issue described in P961, which I think is this bug in PHP: https://bugs.php.net/bug.php?id=43200
Work around it by defining a "PHIDInterface" and having both "Flaggable" and "Policy" extend it, so that there is only one `getPHID()` declaration.
Test Plan: shrug~
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7408
Summary: Ref T2231. The policy rules are a little murky right now: the "Edit Repository" link requires CAN_EDIT, but the actualy page doesn't. Instead, require CAN_EDIT for the edit page.
Test Plan: As a user without CAN_EDIT, viewed a repository and clicked the edit link.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7406
Summary:
Ref T2231. Allows you to edit the remote URI and credentials.
This is a little bit funky because I'm reusing some of the pages on the new (not-yet-hooked-up) create form. Specifically, it had pages like this:
- Repo Type
- Name/Callsign/Remote
- Auth
- Done
I split "Name/Callsign/Remote" into "Name/Callsign" and "Remote", then when editing the remote I just take you through "Remote" and "Auth" and then back. This lets us reuse the giant pile of protocol/URI sanity checking logic and ends up being pretty clean, although it's a little weird that the "Create" controller does both full-create and edit-remote.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7405
Summary: Ref T2231. Brings "Notify/Publish" and "Autoclose" to the new UI.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7402
