Summary:
Ref T4420. Tokenizers currently operate in "preload" or "ondemand" modes. In the former mode, which is default, they'll try to load the entire result list when a page loads.
The theory here was that this would slightly improve the experience for small installs, and once they got big enough they could switch to "ondemand". In practice, several issues have arisen:
- We generally don't have a good mechanism for telling installs that they should tweak perf config -- `metamta.send-immediately` is the canonical example here. Some large installs are probably affected negatively by not knowing to change this setting, and having settings like this is generally annoying.
- We have way way too much config now.
- With the advent of ApplicationSearch, pages like Maniphest make many redundant loads to prefill sources like projects. Most of the time, this data is not used. It's far simpler to switch everything to ondemand than try to deal with this, and dealing with this would mean creating two very complex divergent pathways in the codebase for a mostly theoretical performance benefit which only impacts tiny installs.
- We've been using `tokenizer.ondemand` forever on `secure.phabricator.com` since we have many thousands of user accounts, and it doesn't seem sluggish and works properly.
Removing this config is an easy fix which makes the codebase simpler.
I've retained the ability to use preloaded sources, since they may make sense in some cases (in at least one case -- task priorities -- adding a static source pathway might make sense), and they're part of Javelin itself. However, the code will no longer ever go down that pathway.
Test Plan: Used `secure.phabricator.com` for years with this setting enabled.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4420
Differential Revision: https://secure.phabricator.com/D8232
Summary:
Ref T4420. This is mostly a design change, but addresses two functional issues:
# Many sources exclude disabled accounts, system agents, archived projects, etc. It is rare to select these, but excluding them completely is too severe, and we've made more than a handful of changes over time to replace a "users" endpoint with an "accounts" endpoint (to include disabled users) or similar. Instead, always show these results, but sort them last and use a special style to clearly mark them as closed, disabled, or otherwise unusual.
- As a practical consequence, all the similar endpoints can now be merged, so "accounts" and "users" return the exact same result sets.
# Increasingly, sources can return multiple object types in a single list. For example, "CC" can have a user or mailing list, and soon a project or repository. However, the result list is fairly homogenous across types and it isn't easy to quickly pick out projects vs users. To help with this, add icons showing the result type.
Test Plan:
{F113079}
(The main search results get touched here too, I verified they didn't blow up.)
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran, mbishopim3
Maniphest Tasks: T4420
Differential Revision: https://secure.phabricator.com/D8231
Summary:
Ref T1279. The new dual-mode user/project tokenizers are a bit disorienting. Provide content type hints.
Very open to any suggestions here, most of this patch is just getting the right data in the right places. We can change things up pretty easily.
- I like the little icons in the tokens themselves, I think they look good and are useful.
- I'm less sold on the '(Project)' thing I did in the dropdown. We can easily make this richer if you have thoughts on it -- we could put icons in the left column maybe? Or right-justify the types?
- I made it always sort users above projects.
Test Plan: See screenshot.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: chad, aran, carl
Maniphest Tasks: T4420, T1279
Differential Revision: https://secure.phabricator.com/D7250
Summary:
Ref T4420. This sets up the basics for modular typeahead sources. Basically, the huge `switch()` is just replaced with class-based runtime dispatch.
The only clever bit I'm doing here is with `CompositeDatasource`, which pretty much just combines the results from several other datasources. We can use this to implement some of the weird cases where we need multiple types of results, although I think I can entirely eliminate many of them entirely. It also makes top-level implementation simpler, since more logic can go inside the sources.
Sources are also application-aware, will be responsible for placeholder text, and have a slightly nicer debug view.
Test Plan: {F112859}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4420
Differential Revision: https://secure.phabricator.com/D8228
Summary:
Ref T2222. This restores the "N older comments are hidden." shield to all ApplicationTransactions applications. Roughly the rule this uses is that transactions older than your most recent comment are hidden, under the assumption that you've already read and dealt with them, since you replied afterward. Then we show your last comment to remind/contextualize you, and anything afterward. We also don't hide transactions if we'd only be hiding a handfull, and we never hide the few most recent transactions.
This might need some #design help.
Test Plan:
The tricky part here is the anchor rule, which deals with the case where you follow a link to `T123#4`, but that would normally be hidden. We simulate a click on "show all" if you hit an anchor which is hidden. Here's what it looks like in Maniphest:
{F112891}
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8229
Summary: I assume this box is always after timeline
Test Plan: test a diff or two
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8230
Summary: Fixes T4423. This works better and is simpler and more flexible.
Test Plan: Clicked "(Show Details)", got a popup with the details.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T4423
Differential Revision: https://secure.phabricator.com/D8227
Summary: Fixes T4429. Shows and allows you to click through on board links when a task appears on workboards.
Test Plan:
{F112837}
Clicked the links.
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran
Maniphest Tasks: T4429
Differential Revision: https://secure.phabricator.com/D8226
Summary: Fixes T3300. Images under 32KB are inlined automatically into CSS using data URIs; larger images remain as normal links. I picked the 32KB threshold arbitrarily, based on it looking roughly like it got reasonable results on `core.pkg.css` (inlining most of the random stuff, but not inlining all the 2X sprites and such).
Test Plan: Loaded site, browsed around, looked at generated CSS.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T3300
Differential Revision: https://secure.phabricator.com/D8225
Summary: Ref T2222. This merges the `tmp.differential` branch, including the
comment -> application transaction migration, to `master`.
Auditors: btrahan
Summary: Ref T2222. Restore this funky is-visible / inline-is-elsewhere logic.
Test Plan: Updated a revision, saw all the inlines render properly when looking at various diffs and versus-diffs. Clicked inline links.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8224
Summary: Ref T2222. Once these are live, yell if any of them seem off. I tried to mostly stay consistent-ish with what we had before.
Test Plan: Looked at a bunch of revisions and saw more detailed, colorful transactions.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8223
Summary: Ref T2222. These don't work yet. We just have to copy a couple fields, but let's sort that out later since this is purely a new feature.
Test Plan: Looked at a revision, no edit links.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8222
Summary: Makes the line in timeline a background "image" instead.
Test Plan: Tested Desktop, Mobile, and Tablet breakpoints with lots of content.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8221
Summary: form.reset() resets a form to whatever values were present when the form was loaded into the DOM. Instead, grab all the pertinent form bits and set there values to "clear". I don't think there's too much utility in putting this somewhere more general, but it could be something like DOM.clearForm(form) or something. Fixes T3629.
Test Plan:
repro'd original issue
- open legalpad doc (or your favorite application transaction powered app)
- type in a comment but do not submit (you are creating a draft) e.g. "foo"
- reload page and note comment appears e.g. "foo"
- change comment e.g. "foobar"
- submit comment
- BUG - after submission, the comment reverts to the comment at initial page load e.g. "foo"
then after this patch, I can't repro it anymore with these steps - the comment is correctly blank
NOTE: this will need to be tested with more complicated forms.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3629
Differential Revision: https://secure.phabricator.com/D8220
Summary: Ref T2222. This is a `tmp.differential`-only issue. Inline comment transactions now have content, so we treat them like body text. We also render them separately as inline text. This produces mail where inlines are rendered twice.
Test Plan: Sent myself mail, saw only one copy of inlines.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8216
Summary:
Ref T2222. This gets rid of Differential's custom view and uses a standard view instead.
This also mostly fixes the rendering logic for inlines.
This is headed to the `tmp.differential` branch.
Test Plan: {F112696}
Reviewers: btrahan
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T1790, T2222
Differential Revision: https://secure.phabricator.com/D8215
Summary: Simplified header, added Workboard button and icon, moved Maniphest actions to "Open Tasks" Object Box. Reduced actions by 3.
Test Plan: Test a number of project pages, looks better, cleaner.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8219
Summary: Makes hyperlinks in phui-timeline-title one color darker, with objects in bold.
Test Plan: Tested a timeline with people, objects, and timestamps.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8214
Summary: Ref T3574. Since this list just clips in a totally reasonable way on mobile and we got another user request for it, let's bump this to 4 for now and we can refine mobile later.
Test Plan: Looked at list on desktop; saw 4 tags before truncation. Looked at list on mobile, saw reasonable clipping behavior which didn't mar usability.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T3574
Differential Revision: https://secure.phabricator.com/D8213
Summary: Ref T2222. On the `tmp.differential` branch, we're currently having
issues parsing commits which reference Differential revisions, because the
"user closed this revision (closed by commit xyz)" message is fataling:
[2014-02-13 14:12:36] EXCEPTION: (PhutilProxyException) Error while
executing task ID 345358 from queue. {>} (AphrontQueryException)
#1048: Column 'contentSource' cannot be null
Specifically, the MessageParser pathway for CommentEditor doesn't set a content
source. Make sure CommentEditor always sets a content source.
(This is also causing a buildup of diffs on D8212 and D8211.)
Auditors: btrahan
Summary: Accidentally removed the line
Test Plan: Test mobile AND desktop
Reviewers: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8212
Summary:
Ref T2222. This is the big one.
This migrates each `DifferentialComment` to one or more ApplicationTransactions (action, cc, reviewers, update, comment, inlines), and makes `DifferentialComment` a double-reader for ApplicationTransactions.
The migration is pretty straightforward:
- If a comment took an action not otherwise covered, it gets an "action" transaction. This is something like "epriestley abandoned this revision.".
- If a comment updated the diff, it gets an "updated diff" transaction. Very old transactions of this type may not have a diff ID (probably only at Facebook).
- If a comment added or removed reviewers, it gets a "changed reviewers" transaction.
- If a comment added CCs, it gets a "subscribers" transaction.
- If a comment added comment text, it gets a "comment" transaction.
- For each inline attached to a comment, we generate an "inline" transaction.
Most comments generate a small number of transactions, but a few generate a significant number.
At HEAD, the code is basically already doing this, so comments in the last day or two already obey these rules, roughly, and will all generate only one transaction (except inlines).
Because we've already preallocated PHIDs in the comment text table, we only need to write to the transaction table.
NOTE: This significantly degrades Differential, making inline comments pretty much useless (they each get their own transaction, and don't show line numbers or files). The data is all fine, but the UI is garbage now. This needs to be fixed before we can deploy this to users, but it's easily separable since it's all just display code.
Specifically, they look like this:
{F112270}
Test Plan:
I've migrated locally and put things through their paces, but it's hard to catch sketchy stuff locally because most of my test data is nonsense and bad migrations wouldn't necessarily look out of place.
IMPORTANT: I'm planning to push this to a branch and then shift production over to the branch, and run it for a day or two before bringing it to master.
I generally feel good about this change: it's not that big since we were able to separate a lot of pieces out of it, and it's pretty straightforward. That said, it's still one of the most scary/dangerous changes we've ever made.
Reviewers: btrahan
CC: chad, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8210
Summary: Ref T2222. A few rendering interfaces rely on fishing the revision ID out of a DifferentialComment, but it will only have the PHID soon. Pass in the revision and use it to determine the ID instead.
Test Plan: Browsed, previewed, examined comments. Clicked anchors.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8209
Summary:
Ref T2222. I wiped out the Differential-specific stats page a long time ago, but missed this. It turned up recently in `grep`.
Facts will eventually fill this role; this code is unreachable; it probably doesn't work now and definitely won't work in a day or two after ApplicationTransactions.
Test Plan: Used `grep` to look for callsites.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8208
Summary: Ref T2222. We need this `clone` when constructing the new multi-comments in Differential, or we get double-comments internally. This shows up as emails with double comment text.
Test Plan: Sent some "Accept + comment" emails, only one comment in the body.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8206
Summary:
Updates PhabricatorTimeline to PHUITimeline. Uses standard colors and spacing, softens up the actors, and reduces visual spacing of action-only events.
- Also updated some 2x sprite images.
Test Plan: Tested Tasks Paste and Pholio in my sandbox.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8205
Summary:
Ref T2222. Ref T4415. We're still writing Differential subscription stuff into this weird legacy `differential_relationship` table, which is like an edge table but extremely ancient.
Move it into a proper table.
I've removed `withSubscriptions()` from `DifferentialRevisionQuery`. It was weird, doesn't work consistently with other similar filters, and was only used by the API. Now it means "ccs", which is consistent with the ApplicationSearch UI and with Maniphest.
Test Plan:
Without migrating, added and removed subscribers via various workflows. Queried for subscribers. Everything worked as expected.
Ran the migration, verified data survived.
Reviewers: btrahan
Reviewed By: btrahan
CC: FacebookPOC, aran
Maniphest Tasks: T2222, T4415
Differential Revision: https://secure.phabricator.com/D8202
Summary:
See D8200. Ref T2222. Instead of writing one comment which can have a ton of different effects, write a series of one-effect comments. These will be easier to convert into ApplicationTransactions.
This has a minor user-facing effect of making these multiple-action comments render separately:
{F111919}
Once the migration completes, they should automatically merge together nicely again.
Test Plan: Made a bunch of comments and took a bunch of actions, all of which worked normally except that they rendered as several things instead of just one.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, FacebookPOC
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8201
Summary:
Ref T2222. Instead of writing one comment which performs both a diff update and adds a comment, write two comments, one for each action. These will translate directly into ApplicationTransactions writes.
This has a small impact on the UX: these updates now render in two rows, instead of one. After T2222, they'll automerge back together.
{F111909}
Test Plan: Updated a revision.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8200
Summary:
Ref T2222. Currently, one `DifferentialComment` can do a lot of things (add ccs, reviewers, comments, inline comments, and perform state changes). In the future, each `ApplicationTransaction` does only one thing. This is the primary piece of complexity which makes the upcoming migration risky, because each comment needs to migrate into multiple transactions.
I want to mitigate this complexity as much as possible before the migration itself happens. One approach I'm going to use to do that is to start writing one comment per effect now, so the mapping is more direct when the migration itself happens and the write code can be straightforward (one row per save()) after the migration.
This tackles a small piece of that, which is the mail Differential sends. Currently, Differential mail acts on a single comment. Instead, allow it to act on a list of comments, but always give it one comment for now. In the future, we can hand it several comments instead and still get the expected behavior.
This change should have no impact on any application behaviors.
Test Plan:
- Commented;
- commented with inline;
- added reviewers;
- added CCs;
- added CCs via mentions;
- updated revision;
- looked at all the mail, all of which seemed sane.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8199
Summary: we should build all the image stuff on every post and use that posted image data if there's an error. this diff makes that so. Fixes T4380.
Test Plan: made a mock with no title, tried to save it, and was delighted to see my images still there. edited a mock - removing the title and adding images - verified edits showed up after erroneous submission. added a title and submitted and changes were saved.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4380
Differential Revision: https://secure.phabricator.com/D8197
Summary:
Ref T2222. Currently, `DifferentialComment` stores both (a) the text of comments and (b) various other transaction details. This data needs to map to both Transactions and TransactionComments in the long run. This diff separates out all the data which is bound for the TransactionComment table, so that when we migrate `DifferentialComment` itself it will //only// need to migrate into the Transactions table. This is a much simpler migration than the inline comment one was, partly because it set up infrastructure and partly because the data is less complex.
Basically, I'm just proxying the read/write for the comment text into the other table. All readers already go through the Query class, and there are only three writers (preview, comment, implicit comment on diff update) which are all highly regular and straightforward to test.
We can also back out of this diff very easily: doing double writes cost only one line of code (`$this->content = $content;`) so we have proper double writes and a trivial revert path.
Test Plan:
- Without migrating, added comments and saw them show up.
- Migrated.
- Saw all the old comments, and no damage to the new ones.
- Added new comments.
- Used comment preview.
- Updated a revision to implicitly create an update comment and verified it looked OK.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8196
Summary: Fixes T4409. I didn't get this quite right when I updated it to ApplicationTransactions.
Test Plan: Renamed a project, saw wiki move.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4409
Differential Revision: https://secure.phabricator.com/D8198
Summary: we were calling a member method on a diffusion hash. not sure why. Fixes T4402
Test Plan: clicked about, no fatals and seemed to move sensical backwards in time
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4402
Differential Revision: https://secure.phabricator.com/D8194
Summary:
Fixes T4379. Several changes:
- Migrate all project members into subscribers.
- When members are added or removed, subscribe or unsubscribe them.
- Show sub/unsub in the UI.
- Determine mailable membership of projects by querying subscribers.
Test Plan:
- As `duck`, joined a project.
- Added the project as a reviewer to a revision.
- Commented on the revision.
- Observed `duck` receive mail.
- Unsubscribed as `duck`.
- Observed no mail.
- Resubscribed as `duck`.
- Mail again.
- Joined/left project, checked sub/unsub status.
- Ran migration, looked at database.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, asherkin
Maniphest Tasks: T4379
Differential Revision: https://secure.phabricator.com/D8189
Summary:
These didn't get updated either when the main search got rebuilt. Adjust and modernize them. Also this uses "exclude", which I couldn't find any callsites for but just missed, so restore that.
At some point I plan to swap this whole thing to ApplicationSearch and that will let us get rid of a bunch of stuff.
Test Plan: Searched for all filters, got sensible results, verified source object doesn't show up as a result.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, mbishopim3
Differential Revision: https://secure.phabricator.com/D8188
Summary:
Ref T4403. Implements "only the first time" for Maniphest rules, and fixes the trigger itself.
The trigger would never fire and block rules because it was comparing a string (like "first") to an int (like 0).
The "only" vs "every" stuff is contributed and I should have pushed back harder on this toInt / toString stuff. Maybe I'll just get rid of it; it purely causes confusion and problems.
Test Plan: Wrote an "only the first time" rule, ran it twice, it applied once.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4403
Differential Revision: https://secure.phabricator.com/D8193
Summary: Ref T1344. I don't think we'll need to destroy any data moving forward, and would like to get more feedback about what changes users want.
Test Plan: Looked at a project and clicked onto its board.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T1344
Differential Revision: https://secure.phabricator.com/D8191
Summary: ...by the surprising step of changing how this data is stored from id to phid. Also a small fix to not allow "disabled" rules to be used as herald rule conditions, i.e. can't make a rule that depends on a disabled rule.
Test Plan: viewed existing herald rule that had a rule condition and noted nice new display using handle. made a new rule that had a rule condition and verified it worked correctly.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8186
Summary:
Ref T4379. Fixes T4359. Currently, `bin/search index` does not rebuild CustomField indexes. This is because they aren't really part of the main search index. However, from a user's point of view this is by far the most logical place to look for index rebuilds, and it's straightforward for us to write into this secondary store.
At some point, it might be nice to let you specify fields as "fulltext" too, although no one has asked for that yet. We could then dump the text of those fields into the fulltext index. Ref T418.
Test Plan: Used `bin/search index --type proj --trace`, etc., and examination of the database to verify that indexes rebuilt. Reindexed users, tasks, projects.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4359, T418, T4379
Differential Revision: https://secure.phabricator.com/D8185
