Summary:
- We currently run ##parseValueFromCommitMessage()## on all fields present in
the message, but not ##validateField()##.
- This detects value errors (e.g., an invalid reviewer) but not higher-level
errors (e.g., a missing field).
- This can break the stacked-commits Git mutable history workflow by
recognizing too many commit messages as valid ("multiple valid commit messages,
this is ambiguous").
- This also gives you some errors ("Missing test plan") too late in "arc diff
--create" (after the diff has been built).
Test Plan:
- Grepped for validateField() calls, removed a couple of calls that had the
same implementation as the base class.
- Grepped for other calls to this to make sure I'm not stumbling into
unintended side effects, but it only runs from the diff workflow.
- Ran "arc diff --create" with an invalid test plan, got a good error early in
the process.
- Ran "arc diff master" with stacked local commits, got a correct selection of
the intended message.
Reviewers: cpiro, btrahan, jungejason
Reviewed By: cpiro
CC: aran, cpiro
Differential Revision: https://secure.phabricator.com/D1373
interfaces
Summary:
- We have a hard-coded minimum length of 3 right now (and 1 in the other
interface), which is sort of silly.
- Provide a more reasonable default, and allow it to be configured.
- We have two password reset interfaces, one of which no longer actually
requires you to verify you own the account. This is more than a bit derp.
- Merge the interfaces into one, using either an email token or the account's
current password to let you change the password.
Test Plan:
- Reset password on an account.
- Changed password on an account.
- Created a new account, logged in, set the password.
- Tried to set a too-short password, got an error.
Reviewers: btrahan, jungejason, nh
Reviewed By: jungejason
CC: aran, jungejason
Maniphest Tasks: T766
Differential Revision: https://secure.phabricator.com/D1374
Summary:
Until T605 gets fixed, you might end up with a Project without a Profile if the
Profile insert failed. This fatals the list view; instead, don't fatal if a
profile is missing.
(At some point we should probably just merge this field into the Project object,
I was just mimicking the user/profile separation but we have partial-field
object support now and Projects aren't super heavily used or very big.)
Test Plan:
- Viewed list view including a project with a missing profile.
- Edited the project, creating its profile.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: arice, aran, btrahan
Differential Revision: https://secure.phabricator.com/D1368
Summary:
- Add some captions to make it more clear what these fields mean.
- Require "name", since tokenizers use it exclusively.
- Limit URI to allowed protocols, since admins can currently XSS users by
entering a "javascript:" URI and then tricking the user into clicking the
mailing list name. This exploit is dumb, but technically privilege escallation.
Test Plan:
- Created a new mailing list.
- Edited a mailing list.
- Tested URI: valid, invalid, omitted.
- Tested name: valid, omitted.
Reviewers: btrahan, jungejason, davidreuss
Reviewed By: btrahan
CC: aran, btrahan
Differential Revision: https://secure.phabricator.com/D1365
Summary:
Added a Conduit API method to return all transactions for a
given set of task_ids. This will be used to comments and other important
information about the tasks.
Test Plan:
Use Conduit to execute ##maniphest.gettasktransactions## and
visually verify that transaction information is returned.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1361
Summary: @s reported an issue with implicit file:// URIs in Git, see P270.
Recognize and handle URIs in this format. For URIs we don't understand, raise an
exception.
Test Plan:
- Added failing tests.
- Fixed code.
- Tests pass.
Reviewers: btrahan, jungejason, s
Reviewed By: s
CC: aran, epriestley, s
Differential Revision: https://secure.phabricator.com/D1362
Summary:
- There are some recent reports of login issues, see T755 and T754. I'm not
really sure what's going on, but this is an attempt at getting some more
information.
- When we login a user by setting 'phusr' and 'phsid', send them to
/login/validate/ to validate that the cookies actually got set.
- Do email password resets in two steps: first, log the user in. Redirect them
through validate, then give them the option to reset their password.
- Don't CSRF logged-out users. It technically sort of works most of the time
right now, but is silly. If we need logged-out CSRF we should generate it in
some more reliable way.
Test Plan:
- Logged in with username/password.
- Logged in with OAuth.
- Logged in with email password reset.
- Sent bad values to /login/validate/, got appropriate errors.
- Reset password.
- Verified next_uri still works.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, btrahan, j3kuntz
Maniphest Tasks: T754, T755
Differential Revision: https://secure.phabricator.com/D1353
Summary:
Just talked to @tuomaspelkonen, and turns out there is a case where
postponed tests results use the filepath for both the name and file
parameters. Then, after the tests have completed, the unittest
results are updated with the class name as the test name. To handle
this, this diff matches the stored unittest results name against
either the name or file component of the updated unittest info.
Not sure of great way to generally handle these situations. Perhaps,
long term, we can just use a placeholder unittest result, mark that
as passed (or delete it?) then add a new test result with the correct
name.
Test Plan: updated unittest result with new name (but file was the same).
Reviewers: epriestley, tuomaspelkonen
Reviewed By: epriestley
CC: aran, epriestley, andrewjcg
Differential Revision: https://secure.phabricator.com/D1356
Summary:
When using postponed unittests to make 'arc diff' faster, there
are some situations where it is difficult to know exactly how
many unittests will be run. This is the case for many of our
C++ unittests, which we can't really know until we compile the
tests (which is slow, and probably isn't reasonable to be done
before posting the diff). I suppose we could make sure we
explicitly which tests a C++ unittest will run in some way, but
this would require a lot of change to our backend test infra.
Also, it seems that this is a pretty general issue of not knowing
how many unittests will be run until they actually run.
This diff adds an optional "create" parameter to updateunitresults
which wil create a new unit tests result rather than updating an
existing one. I am not sure if this really fits here or should
be its own method, but there is a lot of code re-use between them
so I consolidated.
Test Plan: updated a diff with a new unit test result
Reviewers: epriestley, jungejason
Reviewed By: epriestley
CC: aran, epriestley, andrewjcg, tuomaspelkonen
Differential Revision: https://secure.phabricator.com/D1352
Summary:
we used to need this function for security purposes, but no longer need
it. remove it so that some call sites can be optimized via smarter data
fetching, and so the whole codebase can have one less thing in it.
Test Plan:
verified the images displayed properly for each of the following
- viewed a diff with added images.
- viewed a user feed
- viewed a user profile
- viewed all image macros
- viewed a paste and clicked through "raw link"
weakness in testing around proxy files and transformed files. not sure what
these are. changes here are very programmatic however.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, btrahan, epriestley
Maniphest Tasks: T672
Differential Revision: https://secure.phabricator.com/D1354
Phabricator
Summary: ...this breaks without D1328. Used good ole "codemod" to do this
work, with lots of manual edits around 80 chars.
Test Plan: clicked around phabricator tool suite, particular differential, a
bunch
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1351
Summary: We need some additional fields to heuristically match revisions to the
working copy in arc.
Test Plan: Executed conduit method, got correct values in fields
Reviewers: btrahan, jungejason
Reviewed By: jungejason
CC: aran, jungejason
Differential Revision: https://secure.phabricator.com/D1347
Summary:
The filename header for inline comments used to span 2 columns - the line number
and the comment. With the addition of a column for the diff (to link to inline
comments on previous diffs), the filename header should now span 3 columns
instead of just the line number and diff, leaving the comment squished to the
right.
Test Plan:
Opened a differential revision with an inline comment from a previous diff, and
saw that the filename header continued across the comment. Also checked an
inline comment on a current diff, and saw that it looks fine.
Reviewers: epriestley, btrahan, jungejason
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1340
Summary: Clicks all the "Show All" links for you at the touch of a button.
Test Plan:
- Used "reveal entire file" on revealable files.
- Opened on already-visible files, got "entire file shown".
- Used other menu options.
- Used normal "show more" links.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley, btrahan
Maniphest Tasks: T497
Differential Revision: https://secure.phabricator.com/D1331
Summary:
We currently don't link to comments which aren't visible. Link to the
appropriate diff in a new window, indicating where the comment lives.
Test Plan: Clicked visible, not-so-visible comments.
Reviewers: btrahan, jungejason, davidreuss
Reviewed By: btrahan
CC: aran, btrahan, epriestley
Maniphest Tasks: T555, T449
Differential Revision: https://secure.phabricator.com/D1333
Summary: Make it a little easier to create a bunch of accounts if your company
has more than like 5 employees.
Test Plan: Ran "add_user.php" to create new users. Created new users from the
web console.
Reviewers: btrahan, jungejason, rguerin
Reviewed By: btrahan
CC: aran, btrahan, rguerin
Differential Revision: https://secure.phabricator.com/D1336
Summary:
If you try to establish several sessions quickly (e.g., by running several
copies of "arc" at once, as in "arc x | arc y"), the current logic has a high
chance of making them all pick the same conduit session to refresh (since it's
the oldest one when each process selects the current sessions). This means they
all issue updates against "conduit-3" (or whatever) and one ends up with a bogus
session.
Instead, do an update against the table with the session key we read, so only
one process wins the race. If we don't win the race, try again until we do or
have tried every session slot.
Test Plan:
- Wiped conduit sessions, ran arc commands to verify the fresh session case.
- Ran a bunch of arc piped to itself, e.g. "arc list | arc list | arc list |
...". It succeeds up to the session limit, and above that gets failures as
expected.
- Manually checked the session table to make sure things seemed reasonable
there.
- Generally ran a bunch of arc commands.
- Logged out and logged in on the web interface.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, btrahan
Maniphest Tasks: T687
Differential Revision: https://secure.phabricator.com/D1329
Summary:
Provide an easy way to jump to Diffusion from Differential if we have
the data we need to connect them.
Test Plan: Tested menu in linked and unlinked diffs. Used menu item.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley, btrahan
Maniphest Tasks: T309
Differential Revision: https://secure.phabricator.com/D1326
Summary:
When the user loads a page with an anchor on it like #thing, or clicks a link to
#thing, and #thing doesn't exist, keep trying to navigate to #thing for a few
seconds.
This allows anchors to work when the target is in content which is later ajaxed
in. In particular, this affects inline comments in Differential.
Test Plan: Opened inline comment links in a new tab, was in the right place when
I switched tabs.
Reviewers: nh, btrahan, jungejason
Reviewed By: btrahan
CC: aran, btrahan, epriestley
Maniphest Tasks: T492
Differential Revision: https://secure.phabricator.com/D1327
Summary: These seem to work relatively reasonably and don't have any known
deal-breaking failures.
Test Plan: shrug~
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, btrahan
Differential Revision: https://secure.phabricator.com/D1324
corresponding ConduitAPI
Summary: reasonable title... also made this new functionality used by the
repository worker for parsing diffs
Test Plan:
- looked at the conduit console and queried for various types of hashes,
including hashes with no match. got correct results.
- identified a reasonable diff from a local git repo. set the revision status
to 2 (ACCEPTED) in the database. augmented the worker parser code to var_dump
and die after finding revision id. ran scripts/repository/reparse.php
--message rX and verified my var_dumps. removed var_dumps and die and ran
reparse.php again with same paramters. verified revision looked good in
diffusion and there were no errors.
- repeated the above reparse.php jonx for a mercurial repo. note svn isn't in
this hash game so that test was particularly exciting no-op'dness i did not
bother with
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, btrahan, epriestley
Differential Revision: https://secure.phabricator.com/D1315
Summary:
There are several open Differential tasks that are basically blocked on not
having reasonable places in the UI to put things. Replace the "View Standalone /
Raw" button with a "View Options" dropdown menu so we can shove things like
"Expand All", "Fold / Unfold File", and "View in Diffusion" in there.
This doesn't change any behavior, just puts the existing options in a menu.
Test Plan:
- Toggled menu open by clicking button.
- Clicked menu items.
- Toggled menu closed by clicking button.
- Toggled menu closed by clicking document.
- Toggled menu closed by opening another menu.
- Toggled menu closed by selecting an item.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, btrahan
Maniphest Tasks: T497, T309
Differential Revision: https://secure.phabricator.com/D1316
Summary: The recent change to the field causes us to render "http://junk.com/D"
in some cases, just null the field if there's no data.
Test Plan: Ran "arc diff --create".
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, btrahan
Differential Revision: https://secure.phabricator.com/D1321
Summary: Preview of Add Reviewers looks silly without actually showing them
Test Plan:
Go to any diff
Leap into action: Add Reviewers
Add some reviewers
Write some comment
Preview including Added reviewers should be displayed
Change action to Comment
Added reviewers should disappear
Repeat with Add CCs
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley, vrana
Differential Revision: https://secure.phabricator.com/D1276
Summary:
See D1295. $unit_messages may be undefined.
I'll see if I can improve the visibility of warnings, the red dot in DarkConsole
is easy to miss right now. See T734.
Test Plan: Loaded a revision with no unit failures, didn't receive a warning.
Reviewers: nh, btrahan, jungejason
Reviewed By: btrahan
CC: aran, btrahan
Differential Revision: https://secure.phabricator.com/D1306
Summary:
Some installs use Git as the backbone of a CI framework or use a Git remote to
share patches. The tracker scripts currently recognize associated revisions as
"Committed" when they appear in any branch, even if that branch is
"alincoln-personal-development_test_hack" or whatever.
To address the broadest need here, allow Git repositories to be configured to
track only certain branches instead of all branches.
This doesn't allow you to import a branch into Diffusion but ignore it in
Differential. Supporting that is somewhat technically complicated because the
parser currently goes like this:
- Look at HEAD of all branches.
- For any commits we haven't seen before, follow them back to something we
have seen (or the root).
- "Discover" everything new.
Since this doesn't track <branch, commit> pairs, we currently don't have enough
information to tell when a commit appears in a branch for the first time, so we
don't have anywhere we can put a test for whether that branch is tracked and do
the Differential hook only if it is.
However, I think this cruder patch satisfies most of the need and is simple and
obvious in its implementation.
See also D1263.
Test Plan:
- Updated a Git repository with various filters: "", "master, remote", "derp",
" ,,, master ,,,,,"
- Edited SVN and Mercurial repositories to verify they didn't get caught in
the crossfire.
- Ran daemon in debug mode on libphutil with filter "derp", got exception
about no tracked branches. Ran with filter "master", got tracking. Ran with no
filter, got tracking.
- Looked at Diffusion with "derp" and "master", saw no branches and "master"
respectively.
- Added unit tests to cover filtering logic.
Reviewers: btrahan, jungejason, nh, fratrik
Reviewed By: fratrik
CC: aran, fratrik, epriestley
Maniphest Tasks: T270
Differential Revision: https://secure.phabricator.com/D1290
Summary:
- We have a few places where we do some kind of ad-hoc comma list tokenizing,
and I'm adding another one in D1290. Add a helper to the request object.
- Add some unit tests.
Test Plan:
- Ran unit tests.
- Used PHID manager, Maniphest custom view, and Repository project editor.
Reviewers: btrahan, fratrik, jungejason
Reviewed By: btrahan
CC: aran, btrahan, epriestley
Differential Revision: https://secure.phabricator.com/D1302
Summary: This diffs adds support for marking up unittest result messages.
Test Plan: Verified that links in unittest results were markup'd.
Reviewers: epriestley, jungejason
Reviewed By: epriestley
CC: aran, epriestley, zeeg
Differential Revision: https://secure.phabricator.com/D1298
Summary:
D1293 adds support for a literal block in remarkup. This diff enables
it in phabricator with a few basic rules (for line breaks, escaping HTML,
and linkifying URLs).
Test Plan: Tested in sandbox
Reviewers: epriestley, jungejason
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1297
Summary:
When all unit tests pass, a box appears between the unit test results and lint
status (for test failures to go in). This checks if there's anything to put
in that div/ul before putting it on the page.
Test Plan:
Loaded a revision with unit tests OK and saw no box. Loaded a revision with
failing unittests, and saw the same box from before.
Reviewers: tuomaspelkonen, epriestley
Reviewed By: epriestley
CC: jungejason, aran, nh, epriestley
Differential Revision: https://secure.phabricator.com/D1295
Summary: Makes it easier to discover the list of all revisions for a user.
Test Plan:
Opened up /differential/filter/revisions/, and saw that it defaulted
to status of all. Clicked between tabs, and it stayed on all. Selected
open, it only displayed open revisions, including as I switched between
tabs.
Reviewers: epriestley, jungejason
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1278
Summary:
We have a debug interface for sending various sorts of email, but normal users
don't really need to use it. In particular, they can:
- Send arbitrary email to other users;
- Discover other users' email addresses fairly easily (CC everyone);
- Send arbitrary email to arbitrary addresses in conjunction with "Mailing
Lists"
In fact, normal users don't need to get to the MetaMTA web interface at all and
it has some somewhat-sensitive things beacuse it has a lot of detailed
information about mail. For instance, users can look at mail records to discover
things like password reset links and per-user object email addresses.
We should smooth out the UI here but I think I can do something about T21 fairly
soon and cover it then.
Test Plan:
Went to /mail/ with a non-admin, got 404'd. Went to /mail/ with an
admin, everything works, got a red admin header.
Reviewers: jungejason, btrahan
Reviewed By: btrahan
CC: aran, btrahan, jungejason
Maniphest Tasks: T718
Differential Revision: https://secure.phabricator.com/D1292
Summary: makes a nice side filter for most UI elements. only place this getds a
little funky is on the test console; a second, inner filter list appears for the
"affected" filters.
Test Plan: viewed each side filter and verified ui. for each filter, interacted
with the ui and made sure things looked right and there were no errors
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Maniphest Tasks: T631
Differential Revision: https://secure.phabricator.com/D1289
Summary:
See T624. I originally wrote this to require an explicit remote, but this
creates an ugly "origin:" in all the URIs and makes T270 more difficult.
Treat all branch names as implying 'origin/'.
Test Plan:
- Pulled and imported a fresh copy of libphutil without issues.
- Browsed various git repositories.
- Browsed Javelin's various branches.
- Ran upgrade script, got a bunch of clean 'origin/master' -> 'master'
conversions.
- Tried to specify an explicit remote in a default branch name.
- Unit tests.
Reviewers: nh, jungejason, btrahan
Reviewed By: btrahan
CC: aran, btrahan
Maniphest Tasks: T624
Differential Revision: https://secure.phabricator.com/D1269
Summary:
- When changing auxiliary field values, use transactions.
- Clean up some of the load/save logic for auxiliary fields so it's a little
more performant.
NOTE: The transaction display of auxiliary fields is incredibly hacky, I'll
follow up with a more nuanced approach but wanted to limit scope here.
Test Plan: Created and edited tasks with custom fields configured; created and
edited tasks without custom fields configured.
Reviewers: btrahan, jungejason, zeeg
Reviewed By: jungejason
CC: aran, jungejason
Maniphest Tasks: T418
Differential Revision: https://secure.phabricator.com/D1283
Summary: Allow paths to match even if they differ by trailing slashes and
".git".
Test Plan: Ran unit tests.
Reviewers: jungejason, btrahan
Reviewed By: jungejason
CC: aran, jungejason
Maniphest Tasks: T710
Differential Revision: https://secure.phabricator.com/D1286
Summary:
- These never actually did anything.
- I don't even really remember why I built them, maybe the Open Source team
was pushing for more GitHub integration or something? I really have no idea.
- Anyway, repository tailers do everything these could do (and much more).
Test Plan:
- Ran tailers off GitHub for many months without needing post-receive hooks.
- Grepped for relevant strings, couldn't find any references.
- Used "Repository" edit interface for a Git repository.
Reviewers: btrahan, jungejason
Reviewed By: jungejason
CC: aran, jungejason
Maniphest Tasks: T706
Differential Revision: https://secure.phabricator.com/D1273
Summary:
- On the edit view, this is represented as a checkbox.
- On the detail view, it renders with a user-selectable string.
Test Plan: Added a bool field to my local install, checked and unchecked it.
Reviewers: zeeg, jungejason, btrahan
Reviewed By: jungejason
CC: aran, jungejason
Differential Revision: https://secure.phabricator.com/D1277
Summary:
Git accepts either "git@x:/path" or "ssh://git@x.com/path" URIs to mean the
exact same thing, which is causing some false positives and confusion,
particularly because we sometimes mutate URIs.
Since this is just a sanity check, we don't really care about the username,
domain or credentials -- matching the paths is good enough. We're just trying to
make it hard to shoot yourself in the foot by copy-pasting the same local path
into two repositories and forgetting to change one, like I did. :P
Relax the check to only verify the paths are the same.
Test Plan:
- Ran unit tests, which should fully cover things.
- Ran commit discovery daemon in debug mode on incorrectly and correctly
configured repositories.
Reviewers: ajtrichards, jungejason, btrahan
Reviewed By: jungejason
CC: aran, jungejason
Maniphest Tasks: T710
Differential Revision: https://secure.phabricator.com/D1279
