Summary:
Ref T8672. Ref T9187. Root issue in at least one case is:
- User makes a commit including a file with some non-UTF8 text (say, a Japanese file full of Shift-JIS).
- We pass the file to the TransactionEditor so it can inline or attach the patch if the server is configured for these things.
- When inlining patches, we convert them to UTF8 before inlining. We must do this since the rest of the mail is UTF8.
- When attaching patches, we send them in the original encoding (as file attachments). This is correct, and means we need to give the worker the raw patch in whatever encoding it was originally in: we can't just convert it to utf8 earlier, or we'd attach the wrong patch in some cases.
- TransactionEditor does its thing (e.g., creates the commit), then gets ready to send mail about whatever it did.
- The publishing work now happens in the daemon queue, so we prepare to queue a PublishWorker and pass it the patch (with some other data).
- When we queue workers, we serialize the state data with JSON.
So far, so good. But this is where things go wrong:
- JSON can't encode binary data, and can't encode Shift-JIS. The encoding silently fails and we ignore it.
Then we get to the worker, and things go wrong-er:
- Since the data is bad, we fatal. This isn't a permanent failure, so we continue retrying the task indefinitely.
This applies several fixes:
# When queueing tasks, fail loudly when JSON encoding fails.
# In the worker, fail permanently when data can't be decoded.
# Allow Editors to specify that some of their data is binary and needs special handling.
This is fairly messy, but some simpler alternatives don't seem like good ways forward:
- We can't convert to UTF8 earlier, because we need the original raw patch when adding it as an attachment.
- We could encode //only// this field, but I suspect some other fields will also need attention, so that adding a mechanism will be worthwhile. In particular, I suspect filenames //may// be causing a similar problem in some cases.
- We could convert task data to always use a serialize()-based binary safe encoding, but this is a larger change and I think it's correct that things are UTF8 by default, even if it makes a bit of a mess. I'd rather have an explicit mess like this than a lot of binary data floating around.
The change to make `LiskDAO` will almost certainly catch some other problems too, so I'm going to hold this until after `stable` is cut. These problems were existing problems (i.e., the code was previously breaking or destroying data) so it's definitely correct to catch them, but this will make the problems much more obvious/urgent than they previously were.
Test Plan:
- Created a commit with a bunch of Shift-JIS stuff in a file.
- Tried to import it.
Prior to patch:
- Broken PublishWorker with distant, irrelevant error message.
With patch partially applied (only new error checking):
- Explicit, local error message about bad key in serialized data.
With patch fully applied:
- Import went fine and mail generated.
Reviewers: chad
Reviewed By: chad
Subscribers: devurandom, nevogd
Maniphest Tasks: T8672, T9187
Differential Revision: https://secure.phabricator.com/D13939
Summary:
Minor layout updates to Ref T8099
- Timeline tweaks
- Use Lato headers in Document Obj Headers
- Minor Remarkup
- Add Audit Icons
(Unclear if Audit is "correct", ie Status vs. Commit Status) But added icons anyways if needed.
Test Plan: Review each of the updated elements
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8099
Differential Revision: https://secure.phabricator.com/D13357
Summary: Ref T8099. This adds a new class which all search engines return for layout. I thought about this a number of ways, and I think this is the cleanest path. Each Engine can return whatever UI bits they needs, and AppSearch or Dashboard picks and lays the bits out as needed. In the AppSearch case, interfaces like Notifications, Calendar, Legalpad all need more custom layouts. I think this also leaves a resonable path forward for NUX as well. Also, not sure I implemented the class correctly, but assume thats easy to fix?
Test Plan: Review and do a search in each application changed. Grep for all call sites.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8099
Differential Revision: https://secure.phabricator.com/D13332
Summary: All classes should extend from some other class. See D13275 for some explanation.
Test Plan: `arc unit`
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13283
Summary: Ref T8455. Use the standard actions in commit rules, instead of a custom action.
Test Plan: Wrote an "add cc" Herald rule for commits, pushed a commit, saw the rule fire correctly.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8455
Differential Revision: https://secure.phabricator.com/D13181
This fixes this, which only crops up some of the time:
```
Daemon 39827 STDE [Thu, 04 Jun 2015 03:03:11 +0000] [2015-06-04 03:03:10] EXCEPTION: (PhutilProxyException) Error while executing Task ID 902271. {>} (PhabricatorDataNotAttachedException) Attempting to access attached data on PhabricatorRepositoryCommit (via getCommitData()), but the data is not actually attached. Before accessing attachable data on an object, you must load and attach it.
Daemon 39827 STDE [Thu, 04 Jun 2015 03:03:11 +0000]
Daemon 39827 STDE [Thu, 04 Jun 2015 03:03:11 +0000] Data is normally attached by calling the corresponding needX() method on the Query class when the object is loaded. You can also call the corresponding attachX() method explicitly. at [<phabricator>/src/infrastructure/storage/lisk/PhabricatorLiskDAO.php:166]
Daemon 39827 STDE [Thu, 04 Jun 2015 03:03:11 +0000] arcanist(head=master, ref.master=8c589f1f759f), phabricator(head=master, ref.master=4a45620b0458), phutil(head=master, ref.master=afc05a9a7f00)
Daemon 39827 STDE [Thu, 04 Jun 2015 03:03:11 +0000] #0 <#2> PhabricatorLiskDAO::assertAttached(string) called at [<phabricator>/src/applications/repository/storage/PhabricatorRepositoryCommit.php:129]
Daemon 39827 STDE [Thu, 04 Jun 2015 03:03:11 +0000] #1 <#2> PhabricatorRepositoryCommit::getCommitData() called at [<phabricator>/src/applications/audit/editor/PhabricatorAuditEditor.php:669]
Daemon 39827 STDE [Thu, 04 Jun 2015 03:03:11 +0000] #2 <#2> PhabricatorAuditEditor::buildMailBody(PhabricatorRepositoryCommit, array) called at [<phabricator>/src/applications/transactions/editor/PhabricatorApplicationTransactionEditor.php:2178]
Daemon 39827 STDE [Thu, 04 Jun 2015 03:03:11 +0000] #3 <#2> PhabricatorApplicationTransactionEditor::sendMailToTarget(PhabricatorRepositoryCommit, array, PhabricatorMailTarget) called at [<phabricator>/src/applications/transactions/editor/PhabricatorApplicationTransactionEditor.php:2152]
Daemon 39827 STDE [Thu, 04 Jun 2015 03:03:11 +0000] #4 <#2> PhabricatorApplicationTransactionEditor::sendMail(PhabricatorRepositoryCommit, array) called at [<phabricator>/src/applications/transactions/editor/PhabricatorApplicationTransactionEditor.php:998]
Daemon 39827 STDE [Thu, 04 Jun 2015 03:03:11 +0000] #5 <#2> PhabricatorApplicationTransactionEditor::publishTransactions(PhabricatorRepositoryCommit, array) called at [<phabricator>/src/applications/transactions/worker/PhabricatorApplicationTransactionPublishWorker.php:21]
Daemon 39827 STDE [Thu, 04 Jun 2015 03:03:11 +0000] #6 <#2> PhabricatorApplicationTransactionPublishWorker::doWork() called at [<phabricator>/src/infrastructure/daemon/workers/PhabricatorWorker.php:91]
Daemon 39827 STDE [Thu, 04 Jun 2015 03:03:11 +0000] #7 <#2> PhabricatorWorker::executeTask() called at [<phabricator>/src/infrastructure/daemon/workers/storage/PhabricatorWorkerActiveTask.php:162]
Daemon 39827 STDE [Thu, 04 Jun 2015 03:03:11 +0000] #8 <#2> PhabricatorWorkerActiveTask::executeTask() called at [<phabricator>/src/infrastructure/daemon/workers/PhabricatorTaskmasterDaemon.php:20]
Daemon 39827 STDE [Thu, 04 Jun 2015 03:03:11 +0000] #9 PhabricatorTaskmasterDaemon::run() called at [<phutil>/src/daemon/PhutilDaemon.php:185]
Daemon 39827 STDE [Thu, 04 Jun 2015 03:03:11 +0000] #10 PhutilDaemon::execute() called at [<phutil>/scripts/daemon/exec/exec_daemon.php:125]
```
Auditors: btrahan
Summary:
Ref T6367. Do all mail, feed, notification and search stuff from the daemons, in all editors.
There are four relatively-stateful editors (Audit, Differential, Phriction, PhortuneCart) which needed special care to move state into the daemons properly.
Beyond that, I moved mailTo/mailCC/feedRelated/feedNotify to be computed before we enter the worker:
- This is simpler, since a lot of editors rely on being able to call `$object->getReviewers()` or similar to compute them.
- This is more correct, since we want to freeze the lists at this moment in time.
Finally, I renamed `loadEdges` to `willPublish` and made it a slightly more general hook.
---
This is a bit fragile and I'm not //thrilled// about it.
It would probably be cleaner to have separate Editor and Publisher classes (something like @fabe's D11329 did). However, I think that's quite a lot of work, and I'd like to see stronger motivation for it (either in this actually being more fragile than I think, or there being other things we get out of it). Overall, I'm comfortable with this change, just definitely not a big fan of the "save" + "load" pattern since I think it's really fragile, nonobvious, hard to debug/predict, etc.
Test Plan:
Directly updated editors:
- Created a new Phriction page, saw "Document Content".
- Edited a Phriction page, saw "Document Diff".
- Edited a revision, got normal looking mail.
- Faked in `changedPriorToCommitURI` and verified it survived the state boundary.
- Sent Audit mail.
- Sent invoice mail.
Indirect editors - for these, I just made a change and made sure the mail generated:
- Updated a paste.
- Updated an event.
- Updated a thread.
- Updated a task.
- Updated a mock.
- Updated a question.
- Updated a project.
- Updated a file.
- Updated an initiative.
- Updated a Legalpad document.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, fabe
Maniphest Tasks: T6367
Differential Revision: https://secure.phabricator.com/D13115
Summary: Ref T8099, Fixes T8341. Switches all remaining callsites to setBarColor to use setStatusIcon (sans workboards).
Test Plan: Test each of the applications I changed as I could (not Releeph).
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8341, T8099
Differential Revision: https://secure.phabricator.com/D13059
Summary:
Ref T7447. Implements per-viewer comment hiding. Once a comment is obsolete or uninteresting, you can hide it completely.
This is sticky per-user.
My hope is that this will strike a better balance between concerns than some of the other approaches (conservative porting, summarization, hide-all).
Specifically, this adds a new action here:
{F435621}
Clicking it completely collapses the comment into a small icon on the previous line, and saves the comment state as hidden for you:
{F435626}
You can click the icon to reveal all hidden comments below the line.
Test Plan:
- Hid comments.
- Showed comments.
- Created, edited, deleted and submitted comments.
- Used Diffusion comments (hiding is not implemented there yet, but I'd plan to bring it there eventually if it works out in Differential).
Reviewers: btrahan, chad
Reviewed By: btrahan
Subscribers: jparise, yelirekim, epriestley
Maniphest Tasks: T7447
Differential Revision: https://secure.phabricator.com/D13009
Summary: This data is available and loaded, just not used.
Test Plan: {F411442}
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12951
Summary: Fixes T8264. Broken in D12929. Sweep all the applyBuiltin implementations and always break; rather than return
Test Plan: added myself to a project successfully (showed up as a member)
Reviewers: epriestley, chad
Subscribers: Korvin, epriestley
Maniphest Tasks: T6403, T8264
Differential Revision: https://secure.phabricator.com/D12940
Summary: Ref T6403. Conpherence keeps track of comments for message counts so we needed some special attention there. Otherwise, straight-forward.
Test Plan: left a comment on a diff with inline comments. sent messages in conpherence successfully. verified unread count incremented correctly for sent messages for users.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6403
Differential Revision: https://secure.phabricator.com/D12932
Summary: Ref T6403. This one was pretty easy since no one does anything custom with subscribers.
Test Plan: subscribed / unscribed to a random commit ("audit"). joined / left, watched / unwatched a project
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6403
Differential Revision: https://secure.phabricator.com/D12930
Summary: Ref T6403. This does TYPE_EDGE since I just had to deal with T8252. Look like this fixes a few editors (maybe) that would have had fatals with mentions like slowvote and ponder.
Test Plan: made a phame post mentioning a task and it worked! joined / left a project, watched / unwatched a project and that worked! blind faith for other sites.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6403
Differential Revision: https://secure.phabricator.com/D12929
Summary: Currently adding auditors in commit message only works with the plural. Make "Auditor: bla" work.
Test Plan: Unit tests. I don't know if I am supposed to add a test.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: joshuaspence, epriestley
Differential Revision: https://secure.phabricator.com/D10636
Summary:
New, cleaner, ObjectItemLists. Lots of minor style tweaks, basic overview:
- Remove FootIcons
- Remove Stackable
- Remove Plain List
- Add StatusIcon
- Add setting ObjectList to an ObjectBox
- Minor retouches to Headers
Mostly, this should give us an idea of life with the new Object Lists. I'll take another application by application pass down the road. This mostly looks at implementation in Maniphest, Differential, Audit, Workboards. Checked a few other areas and dialogs while testing, and everything looks square.
Test Plan: Maniphest, Differential, Homepage, Audit, People, and other applications. Drag reorder, etc.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12865
Summary: Use `__CLASS__` instead of hard-coding class names. Depends on D12605.
Test Plan: Eyeball it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12806
Summary: This class seems to be unused (or maybe I am missing something).
Test Plan: Unit tests still pass.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12565
Summary:
Ref T7447. This ports comments forward and backward in the best case:
- The old comment is on a changeset with the same filename.
- The old and new files are pretty much the same, line-for-line.
This will fail to port a lot of comments around and probably port a lot of comments into goofy places. We can see how bad it is in practice.
Errata:
- Design is me cobbling something together, probably worth tweaking.
- "Old Comment" should, at a minimum, say "Newer Comment" sometimes, or we should come up with some better name for this stuff.
Test Plan: {F377214}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: johnny-bit, yelirekim, epriestley
Maniphest Tasks: T7447
Differential Revision: https://secure.phabricator.com/D12484
Summary:
Ref T7803. Ref T5873. I want to drive Conduit through more shared infrastructure, but can't currently add parameters automatically.
Put a `getX()` around the `defineX()` methods so the parent can provide default behaviors.
Also like 60% of methods don't define any special error types; don't require them to implement this method. I want to move away from this in general.
Test Plan:
- Ran `arc unit --everything`.
- Called `conduit.query`.
- Browsed Conduit UI.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: hach-que, epriestley
Maniphest Tasks: T5873, T7803
Differential Revision: https://secure.phabricator.com/D12380
Summary:
...because its always at least the string <ATTACHABLE>... Not sure when we'd hit this / see the TODO about making it better, but its definitely a logic bug right now.
(an update to D12347 helped me notice that this conditional is always hit and may fatal later)
Test Plan: NA
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12348
Summary:
Fixes T7731. When a user writes a "Send me an email" rule, always try send them an email, even if their notification settings would normally downgrade it to a notification.
In particular, this is stronger than these downgrades:
- Downgrades due to "self actions";
- downgrades due to "mail tags".
Test Plan:
- Wrote various Herald rules with "Send me an email" rules.
- Used `bin/mail list-outbound` / `show-outbound` to vet generated mail.
- Mail reacted properly to a variety of conditions (disabled accounts, settings, "send me an email" rule, forced delivery).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7731
Differential Revision: https://secure.phabricator.com/D12300
Summary:
Fixes T7199. This still isn't a shining example of perfect code, but the raw amount of copy/paste is much lower than it used to be.
- Reduce code duplication between existing receivers.
- Expose receiving objects in help menus where appropriate.
- Connect some "TODO" receivers.
Test Plan:
- Sent mail to every supported object type.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12249
Summary:
Ref T7199. Convert the single help menu item into a dropdown and allow applications to list multiple items there.
When an application has mail command objects, link them in the menu.
Test Plan:
{F355925}
{F355926}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12244
Summary: Ref T7199. Half of these aren't even reachable, but make some progress toward reducing the amount of nonsense and garbage in mail handling.
Test Plan: Tested all reachable handlers with `bin/mail receive-test`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12237
Summary:
Ref T7199. In the vein of D12231, these options were a bad idea.
- They once served a very narrow, Facebook-specific need (see T1992), except even Facebook only used the Differential setting AFAIK.
- Outside of that special case, they are unused and essentially unusable (generally speaking, they do not meaningfully implement anything modular or replaceable).
- I have no knowledge of any install ever changing these settings, and can imagine no reason why they would.
Moving forward:
- If they really need to, they can fork locally and chagne one line.
- I expect "!actions" to make mail at least somewhat more modular soon, anyway.
- Any derived handlers would break after T7199 and need to be rewritten anyway, so this is just taking advantage of a BC break to do cleanup.
Test Plan:
- Grepped for removed configuration.
- Sent some mail from applications, verified the reply handlers set proper reply addresses.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12233
Summary:
Ref T7199. These were a bad idea which got copy-pasted a bunch.
- There is zero reason to ever set these to different things.
- Unsurprisingly, I don't know of any install which has them set to different things.
Unless I've completely forgotten about it, this option was not motivated by some obscure business need, it was just a bad decision which didn't catch anyone's attention at the time.
We partially remedied the mistake at some point by introducing `metamta.reply-handler-domain`, which works as a default for all applications, but never cleaned this mess up.
Test Plan: Sent some mail from applications, verified it picked up appropraite reply handler domains.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12231
Summary:
Ref T7199. Although this is useful for discovery, it's un-useful enough that we already have an option to disable it, and most applications do not provide any meaningful instructions.
Throwing it away makes it easier to move forward and lets us get rid of a config option.
This is becoming a more advanced/power-user feature anyway, and the new syntax will be significantly more complex and hard to explain with a one-liner. I'm currently thinking that I'll maybe make the "help" menu a dropdown and give it some options like:
+---+
| O |
+---+---------------------+
| Maniphest Documentation |
| Maniphest Email Actions |
+-------------------------+
Then you click the "Email Actions" thing and get a runtime-derived list of available options. Not sure if I'll actually build that, but I think we can fairly throw the in-mail instructions away even if we don't go in that specific direction.
Test Plan: Grepped for `replyHandlerInstructions`, got no hits.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12229
Summary:
Ref T7689. This serves two goals:
- I want to remove Controller->loadViewerHandles(). A nontrivial number of these callsites are loading handles to pass to tokenizers. Since tokenizers need to take strings eventually anyway, we can do less work by letting them take PHIDs now.
- A few changes out, I want tokenizers to accept parameterized tokens (like `viewer()`, `members(differential)`, etc.), so the `setValues()` signature needs to change eventually anyway.
I made this work and converted a handful of callsites as an example; upcoming changes will convert more.
Test Plan:
- Viewed Almanac binding editor; used "Interface".
- Edited Almanac services; used "Projects".
- Edited Almanac devices; used "Projects".
- Searched for commits; used "Auditors"; "Commit Authors", "Repositories".
- Searched for calendar events; used "Created By"; used "Invited".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7689
Differential Revision: https://secure.phabricator.com/D12218
Summary:
Ref T1460. Ref T6403. Replace `Diffusion::INLINEDONE` with `Transactions::INLINESTATE` and generalize things enough that we can lift it into core.
The next change will lift Differential's similar implementation into the core.
Also start implementing a fix for T6403, providing an alternate hook for optional builtin transactions.
Test Plan: Changed inline state in Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6403, T1460
Differential Revision: https://secure.phabricator.com/D12129
Summary:
Ref T1460. See D12126. This is essentially the same change, but for Diffusion.
This is a bit copy/pastey. I'm going to make an effort to lift inline handling into the core before pushing this in, so hopefully that will clean things up a bit.
Test Plan: Submitted stuff in Diffusion and got checkmarks to publish.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12128
Summary:
Ref T1460. This just barely works, but throwing it up in case any of it sounds mechanically crazy before we build integrations/UI/etc.
Specifically, these are the behaviors:
- You can mark your own draft comments as "done" before you submit them. The intent is to let reviewers mark their stuff advisory/minor/not-important before they submit it, to hint to authors that they don't expect the feedback to necessarily be addressed (maybe it's a joke, maybe it's just discussion, maybe it's "consider..").
- You can mark others' published comments as "done" if you're the revision/commit author. The intent is to keep this lightweight by not requiring an audit trail of who marked what done when. If anyone could mark anything done, we'd have to have some way to show who marked stuff.
- When you mark stuff done (or unmark it), it goes into a "draft" state, where you see the change but others don't see it yet. The intent is twofold:
- Be consistent with how inlines work.
- Allow us to publish a "epriestley updated this revision + epriestley marked 15 inlines as done" story later if we want. This seems more useful than publishing 15 "epriestley marked one thing as done" stories.
- The actual bit where done-ness publishes isn't implemented.
- UI is bare bones.
- No integration with the rest of the UI yet.
Test Plan: Clicked some checkboxes.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: paulshen, chasemp, epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12033
Summary:
Ref T2009. Ref T1460.
Fixes T2618. When users hit "Delete" on inline comments, delete immediately and offer them "Undo". If they delete indirectly (e.g., by clicking "Delete" from the preview at the bottom of the page), we still prompt them, because the "Undo" action either won't be available or may not be easy to find. This is a "refdelete".
Fixes T6464. This was just a mess. Make it not as much of a mess. It should work now. Pretty sure.
Fixes T4999. We did not refresh these links often enough to find targets for them, so they could race with content. Reevaluate them after loading new changes.
Test Plan:
- Deleted and undid deletion of inlines from main view and preview.
- Clicked "View" on inlines.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6464, T4999, T2618, T1460, T2009
Differential Revision: https://secure.phabricator.com/D12032
Summary:
Ref T1460. Ref T2618.
When publishing a draft inline, mark the inline it replies to (if any) as replied to.
Also, don't load deleted comments as drafts (sets the stage for T2618).
I'll make an effort to clean up the loading mess here in the next revision, and find some more appropriate home for the shared code.
Test Plan: Made and replied to comments in Differential and Diffusion. Saw comments get marked as "Has Replies" and "Is Reply".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2618, T1460
Differential Revision: https://secure.phabricator.com/D12025
Summary:
Ref T1460. Track and store which comments are threaded replies to other comments, vs merely appearing on the same lines.
This doesn't actually write `hasReplies` yet, since that needs to happen when we un-draft comments on submission.
Test Plan: Made inline comments in Differential and Diffusion, including replies. Replies were marked as "Is Reply".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12017
Summary:
Ref T6516. Although this behavior is somewhat-arguable as desirable, I think it's less surprising and more consistent to disable mentions when a repository is publishing.
In particular, if you import a repository developed on another Phabricator install, this stops all the `T123` in commit messages from creating mentions on your unrelated `T123` tasks.
We already disable autoclose, so `Closes T123` and `Ref T123` already have no effect, but a bare `T123` would generate a mention. Likewise, `@epriestley` would generate a mention.
If you import such a repository and then update it periodically, updates will activate autoclose and publishing (if you didn't disable them), but presumably this will hit a couple of tasks and you'll go change the settings if you forgot.
At some point, we may have some kind of use case for separating the "publish" setting into a "publish" setting and a "this is a local repository" setting. For example, if you work at Widget Corp, want to import Phabricator locally, //and// want to write Herald rules against it, you can't currently configure the repository to let you do all of this. But we haven't actually seen a use case for this yet.
Test Plan:
- Pushed some commits with bare `T11`, saw mentions.
- Disabled publishing for the repository, pushed some commits with
- Imported a bunch of commits without seeing pipeline failures.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6516
Differential Revision: https://secure.phabricator.com/D11966
Summary:
Ref T7298. We are currently inconsistent about when we publish feed, email, notifications, audits and Herald rules.
Specifically, there are two settings which impact these things:
- The "importing" flag, which is set when we're importing old commits.
- The "herald-disabled" flag, which was expanded in scope some time ago and now actually means "disable publishing".
Various parts of the pipeline were checking only one of these flags. Instead, all of them should check both.
(For example, we should never email users about importing repositories, nor trigger audits on them.)
Test Plan: See next revision.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7298
Differential Revision: https://secure.phabricator.com/D11826
Summary: Fixes a few issues. The author of the commit is more prominent / not cut off. Auditors is in a more consistent location. More space is available for reasons. Commits by themselves look much less janky. Only downside is actual Audits are now 3 lines vs. 2, but the extra space is used well.
Test Plan:
Test list of audits and commits.
{F309237}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11817
Summary: Fixes T7088. Mainly this updates the documentation but I also snuck in tweaking how the domain reply handler is built. This does two main things -- makes the behavior consistent as some applications who didn't override this behavior would send out emails with reply tos AND makes it easier for us to deprecate the custom domain thing on a per application basis, which is just silly. On that note, the main documentation doesn't get into how this can be overridden, though I left in that mini blurb on the config setting itself. We could deprecate this harder and LOCK things if you want as well.
Test Plan: read docs, looked good. reasoned through re-factor
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7088
Differential Revision: https://secure.phabricator.com/D11725
Summary: Fixes T7118. This does the basic "filter the list" thing, though it ends up being a little manual since I guess this hasn't come up before? There is also potential weird behavior if the user was using an app and lost access to it - they will have nothing selected on edit - but I think this is actually correct behavior in this circumstance.
Test Plan:
used a user who couldn't get access to the "quick create" apps and noted that the dropdown list on dashboard panel create was missing the expected engines
ran `arc unit --everything` to verify abstract method implemented everywhere
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7118
Differential Revision: https://secure.phabricator.com/D11687
Summary: Revamps Profile to be like Projects, a mini portal and side nav with icons.
Test Plan: Viewed my own profile, as well as others. Test seeing my commits, tasks, diffs, and upcoming events. Checked mobile navigation.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11547
Summary: Select a similar or better FontAwesome icon to represent each application
Test Plan: Visual inspection
Reviewers: epriestley, btrahan
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11489
Summary: Ref T6822.
Test Plan: `grep`. This method is only called from within `PhutilArgumentWorkflow::__construct`.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11415
Summary: Ref T6822. This method needs to be `public` because it is called from `PhabricatorApplicationSearchController::buildApplicationMenu()`.
Test Plan: I wouldn't expect //increasing// method visibility to break anything.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11416
Summary: Ref T6822.
Test Plan: Visual inspection. These methods are only called from within `PhabricatorController` subclasses.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11241
Summary: Ref T6822.
Test Plan: Visual inspection. These methods are only called from within the `PhabricatorApplicationSearchEngine` class.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11242
Summary: Modernize remaining edges to subclass `PhabricatorEdgeType`. Largely based on D11045.
Test Plan: Browsed around and performed various actions include subscribing, unsubscribing and watching.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11116
Summary: The actual author here usually gets truncated by the extra text, which doesn't seem needed in most (all?) cases.
Test Plan: Look at list of recent commits.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11127
Summary:
Removes an unused PhabricatorFeedStory Parameter from all getTitleForFeed() and getApplicationTransactionTitleForFeed() functions.
Ref D11088 Ref T6545
Test Plan: ran all unit tests and viewed some dashboard feeds
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6545
Differential Revision: https://secure.phabricator.com/D11146
Summary: Fixes T6595. This diff has two issues as is... 1) the differential data fetching is pretty cheesey, but it looks like we can't just issue three separate databases to get the right data? 2) the translations break, since I am turning this into a string (and not an int) so the whole pluralization bit fails. I think 1 is okay as is and 2 needs to be fixed though I am not sure how to best do that...
Test Plan: loaded home page and it looked nice...!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6595
Differential Revision: https://secure.phabricator.com/D10979
Summary:
Ref T4712. Specifically...
- Differential
- needed getApplicationTransactionViewObject() implemented
- Audit
- needed getApplicationTransactionViewObject() implemented
- Repository
- one object needed PhabricatorApplicationTransactionInterface implemented
- setShouldTerminate(true)
- Ponder
- BONUS BUG FIX - leaving a comment on an answer had a bad redirect URI
- both PonderQuestion and PonderAnswer needed PhabricatorApplicationTransactionInterface implemented
- setShouldTerminate(true) on both "history" controllers
- left a "TODO" on buildAnswers on the question view controller, which is non-standard and should be re-written eventually
- Phortune
- BONUS BUG FIX - fix new user "createNewAccount" code to not fatal
- PhortuneAccount, PhortuneMerchant, and PhortuneCart needed PhabricatorApplicationTransactionInterface implemented
- setShouldTerminate(true) on Account view, merchant view, and cart view controller
- Fund
- Legalpad
- Nuance
- NuanceSource needed PhabricatorApplicationTransactionInterface implemented
- Releeph (this product is kind of a mess...)
- HACKQUEST - had to manually create an arcanist project to even be able to make a "product" and get started...!
- BONUS BUG FIX - make sure to "setName" on product edit
- ReleephProject (should be ReleepProduct...?), ReleephBranch, and ReleepRequest needed PhabricatorApplicationTransactionInterface implemented
- Harbormaster
- HarbormasterBuildable, HarbormasterBuild, HarbormasterBuildPlan, and HarbormasterBuildStep all needed PhabricatorApplicationTransactionInterface implemented
- setShouldTerminate(true) all over the place
Test Plan: foreach application, viewed the timeline(s) and made sure they still rendered
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T4712
Differential Revision: https://secure.phabricator.com/D10925
Summary: Fixes T6343. Grepped for all callsites and added addLinkSection where needed.
Test Plan: Tested Differential, Maniphest, Conpherence, Ponder and Macro. Inspect HTML mail for anchor tags. Inspect text mails for non-disruption.
Reviewers: epriestley, btrahan
Reviewed By: btrahan
Subscribers: talshiri, Korvin, epriestley
Maniphest Tasks: T6343
Differential Revision: https://secure.phabricator.com/D10762
Summary: ...also truncate authorName to 255 so that we don't get database errors. Ref T6350.
Test Plan: see T6350 - mostly doing it live - but I did sanity check and commit something and it worked!
Reviewers: epriestley, chad
Reviewed By: chad
Subscribers: Korvin, epriestley
Maniphest Tasks: T6350
Differential Revision: https://secure.phabricator.com/D10734
Summary: as opposed to "requested". Also re-jigger how the "reason" works so the herald editor can get more specific data rather than a generic message. Fixes T6345 along with companion diff D10726.
Test Plan: made a herald rule to add auditors to a commit and saw it work!
Reviewers: epriestley, chad
Reviewed By: chad
Subscribers: Korvin, epriestley
Maniphest Tasks: T6345
Differential Revision: https://secure.phabricator.com/D10730
Summary: Ref T6345, This adds more consistent color choices to match how Phabricator generally works across Differential/Diffusion per user statuses.
Test Plan: Review a few Audits in my sandbox.
Reviewers: epriestley, btrahan
Reviewed By: btrahan
Subscribers: Korvin, epriestley
Maniphest Tasks: T6345
Differential Revision: https://secure.phabricator.com/D10726
Summary: Fixes T6336. Turns out that the function to update the import status updates that database and doesn't update the object. If the object doesn't get the pertinent update AND there's a herald rule that runs, then the object is later re-saved without ever getting the update flag.
Test Plan: logic in the ole sandbox and going to push it to prod and run re-parse on impacted commits
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley, chad
Maniphest Tasks: T6336
Differential Revision: https://secure.phabricator.com/D10723
Summary:
Ref T5702. This is a forward-looking change which provides some very broad API improvements but does not implement them. In particular:
- Controllers no longer require `$request` to construct. This is mostly for T5702, directly, but simplifies things in general. Instead, we call `setRequest()` before using a controller. Only a small number of sites activate controllers, so this is less code overall, and more consistent with most constructors not having any parameters or effects.
- `$request` now offers `getURIData($key, ...)`. This is an alternate way of accessing `$data` which is currently only available on `willProcessRequest(array $data)`. Almost all controllers which implement this method do so in order to read one or two things out of the URI data. Instead, let them just read this data directly when processing the request.
- Introduce `handleRequest(AphrontRequest $request)` and deprecate (very softly) `processRequest()`. The majority of `processRequest()` calls begin `$request = $this->getRequest()`, which is avoided with the more practical signature.
- Provide `getViewer()` on `$request`, and a convenience `getViewer()` on `$controller`. This fixes `$viewer = $request->getUser();` into `$viewer = $request->getViewer();`, and converts the `$request + $viewer` two-liner into a single `$this->getViewer()`.
Test Plan:
- Browsed around in general.
- Hit special controllers (redirect, 404).
- Hit AuditList controller (uses new style).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5702
Differential Revision: https://secure.phabricator.com/D10698
Summary: we don't want to mention these phids... when expanding transactions, build the unmnentionable map and make it so. slightly hairy due to how the editor framework works, but overall i think this is the right place to put these hooks. Fixes T6331.
Test Plan: made a commit with a commit message that had fixes, refs, depends on, and auditors and saw no erroneous mentions
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, chad, epriestley
Maniphest Tasks: T6331
Differential Revision: https://secure.phabricator.com/D10721
Summary: Fixes T2497. I'm not sure where we are with subscribers and custom vs normal codepath, but the mailtags implementation makes no assumptions and can handle it either way.
Test Plan: made a commit and got some sensible mail tags
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T2497
Differential Revision: https://secure.phabricator.com/D10712
Summary:
Fixes T4896, T6293.
Do most of the work in the editor, but pull the raw patch in the daemon and set that on the editor. This is somewhat of a pre-optimization but it was easy enough to do and makes sense to me.
Test Plan:
made a commit and saw it get parsed.
made a commit with "Auditors: foo" field and saw audit made for foo
turned on inline patch and attach patch and saw the patches
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6293, T4896
Differential Revision: https://secure.phabricator.com/D10705
Summary:
Ref T1191. Now that the whole database is covered, we don't need to do as much work to build expected schemata. Doing them database-by-database was helpful in converting, but is just reudndant work now.
Instead of requiring every application to build its Lisk objects, just build all Lisk objects.
I removed `harbormaster.lisk_counter` because it is unused.
It would be nice to autogenerate edge schemata, too, but that's a little trickier.
Test Plan: Database setup issues are all green.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, hach-que
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10620
Summary:
Ref T1191.
- Adds definitions for missing keys and keys with wrong uniqueness. Generally, I defined these before fixing the key query to actually pull all keys and support uniqueness.
- Moves "key uniqueness" to note severity; this is fixable (probably?) and there are no remaining issues.
- Moves "Missing Key" to note severity; missing keys are fixable and all remaining missing keys are really missing (either missing edge keys, or missing PHID keys):
{F210089}
- Moves "Surplus Key" to note seveirty; surplus keys are fixable all remaining surplus keys are really surplus (duplicate key in Harbormaster, key on unused column in Worker):
{F210090}
Test Plan:
- Vetted missing/surplus/unique messages.
- 146 issues remaining.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10590
Summary: Ref T1191. This fills in some more features and gets audit and auth nearly generating reasonable expected schemata.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10500
Summary:
Additional audit states were made queryable for T5871.
Include them in Conduit's audit.query as well. In doing so corrects
references from "status-foo" to "audit-status-foo".
Depends on D10271
Test Plan: with an api, issues queries and got sensible results
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D10290
Summary: Fixes T5871. These queries get to use the actual column on the commit table since they are about the "aggregate" state of different audits.
Test Plan: issues queries and got sensible results.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5871
Differential Revision: https://secure.phabricator.com/D10271
Summary: Ref T5862. makes the exception work better
Test Plan: issued some queries from audit ui with and without repos - they worked
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5862
Differential Revision: https://secure.phabricator.com/D10268
Summary: Fixes T5862. The Diffusion table uses `id` but all the other infrastructure uses `phid` so just do a quick load of the repositories to get the ids. Long term, we should re-key the table by phid I think.
Test Plan: made a query with a repository and got a proper result set
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5862
Differential Revision: https://secure.phabricator.com/D10245
Summary: Fixes T5872. This won't show up in the initial email until T4896 is further along.
Test Plan:
```
RECIPIENTS
discoball (Disco Ball)
BODY
epriestley added a comment.
ffkn
USERS
epriestley (Author)
COMMIT
http://local.aphront.com:8080/rPOEMS165b6c54f487
```
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5872
Differential Revision: https://secure.phabricator.com/D10266
Summary:
Ref T5861. Currently, mail tags are hard-coded; move them into applications. Each Editor defines its own tags.
This has zero impact on the UI or behavior.
Test Plan:
- Checked/unchecked some options, saved form.
- Swapped back to `master` and saw exactly the same values.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5861
Differential Revision: https://secure.phabricator.com/D10238
Summary:
- Fixes T5851. Currently, if a commit has `Fixes T123`, we generate an email with just that before generating the commit email. Don't send/publish transactions about a commit before it imports (this is a tiny bit hacky, but well-contained and I don't think it causes any problems).
- Fixes T4864. Currently, we try to parse Differential information even if Differential is not installed. Instead, do this only if Differential is installed.
- Fixes T5771. Currently, if we can't figure out who the committer/author of a commit is, we don't publish a `Fixes T123` transaction. Instead, fall back to acting as "Diffusion" if we can't find a better actor. Most of this diff expands the role of application actors. The existing application actors (Herald and Harbormaster) seem to be working well.
Test Plan:
- Pushed a commit with `Fixes T123` and verified it did not generate email directly. (The task half of the transaction still does, correctly.)
- Uninstalled Differential and pushed a commit, got a clean import instead of an exception.
- Commented out author/committer PHIDs and pushed stuff, saw a "Diffusion" actor.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5771, T4864, T5851
Differential Revision: https://secure.phabricator.com/D10221
Summary:
Ref T4896. Now that we have a transaction editor, we can delete a giant block of hacks.
I believe this also resolves the commit/task attachment issues @joshuaspence and @mbishopim3 mentioned.
Test Plan: Attached and detached commits and tasks.
Reviewers: btrahan, joshuaspence, mbishopim3
Reviewed By: mbishopim3
Subscribers: mbishopim3, epriestley, joshuaspence
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10138
Summary: Ref T4896. I got this logic slightly wrong when porting it over: we always want to write this relationship, to allow members of a project with an audit request against a commit to resign and get it out of their queue.
Test Plan:
- Resigned from a commit with an existing relationship.
- Resigned from a commit with no existing relationship, saw one added.
Reviewers: btrahan, joshuaspence, mbishopim3
Reviewed By: mbishopim3
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10137
Summary: Ref T4896. This converts the last "CommentEditor" to a transaction editor and removes a large part of the old code.
Test Plan:
- Added comments.
- Accepted / added auditors.
- Added inline comments.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10128
Summary: Ref T4896. Invoke the new editor directly instead of in a roundabout way when handling Audit email.
Test Plan: Used `bin/mail receive-test` to simulate mail, saw comment post with proper content source.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10127
Summary: Ref T4896. Use the new transaction-oriented `PhabricatorAuditEditor` directly instead of invoking it via the old editor.
Test Plan: Used Conduit to add a comment, use silent mode, and accept a commit.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10126
Summary: Ref T4896. Applies these actions using new transaction stuff.
Test Plan:
- Accepted and raised concern with my own commit, verifying the special project/package behavior.
- Accepted and raised concern with another author's commit, verifying the authority-over-packages/projects behavior.
- Accepted a commit I was not affiliated wiht, verifying the "join as an auditor" behavior.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10125
Summary: Ref T4896. Hook these up with new stuff.
Test Plan:
- Closed an audit.
- Resigned from an audit.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10124
Summary:
Ref T4896. Move the write for "Add Auditors" inside the new Editor.
There are no longer any readers or writers for metadata, so remove the calls for it.
Test Plan: Added auditors from the web UI.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10123
