Summary: Ref T12616. The ability to do {nav Edit > Cancel > Undo} to get your text back on inlines got dropped during the conversion. Restore it.
Test Plan:
Created, replied, and edited inlines, typed text, then cancelled. Was able to undo.
Also undid normal deletion.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17916
Summary:
Fixes T11784. A lot of things are interacting here, but this probably gets slightly better results slightly more often?
Basically:
- When we load content, we try to keep the viewport "stable" on the page, so the page doesn't jump around like crazy.
- If you're near the top or bottom of the page, we try to stick to the top (e.g., reading the summary) or bottom (e.g., writing a comment).
- But, if you followed an anchor to a comment that's close to the bottom of the page, we might stick to the bottom intead of staying with the anchor.
Kind of do a better job by not sticking to the bottom if you have an anchor. This will get things wrong if you follow an anchor, scroll down, start writing a comment, etc. But this whole thing is a pile of guesses anyway.
Test Plan:
- Followed an anchor, saw non-sticky stabilization.
- Loaded the page normally, scrolled to the bottom real fast, saw sticky stabilization.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11784
Differential Revision: https://secure.phabricator.com/D17911
Summary:
Ref T12616. Fixes T12715. I suspect these are very rarely used. (I think you tried to get rid of them before but I pushed back since we couldn't really offer great alternatives at the time?)
Now that the code is in a better place:
- Click an inline's header (just the colored part) to select it with the keyboard selection cursor.
- Click again to deselect it.
- You can use "n" and "p" to jump to comments, so "click + n" is the same as the old "V" action.
- This also makes it easier to swap between keyboard and mouse workflows, since you can jump into things with the keyboard at any inline.
Also, make "Reply" render more consistently.
Test Plan:
- Did all that stuff, things seemed to work OK.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12715, T12616
Differential Revision: https://secure.phabricator.com/D17908
Summary:
Fixes T8130. Allows selected comments to be shown/hidden (with "q") or marked done/not-done (with "w").
(These key selections are because "qwer" are right next to each other on QWERTY keyboards, and now mean "hide, done, edit, reply".)
Also, allow "N" and "P" to do next/previous inline, including hidden inlines. This makes "q" to hide/show a little more powerful and a little easier to undo.
Test Plan: Used "q", "w", "N" and "P" to navigate and interact with comments.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8130
Differential Revision: https://secure.phabricator.com/D17906
Summary:
Ref T12634. Fixes T8131. Currently, most edit operations (edit, reply, collapse, mark done) lose the keyboard cursor state.
Instead, bind the state more tighlty to the inline object itself (instead of the rows which happen to be in the document), and then do a bit of recalculation to try to keep it selected across edits.
Test Plan:
- Used "n" to select an inline.
- Clicked "Done" checkbox.
- Pressed "n".
- Went to the next inline (previously: lost position in document).
- Behavior is also better for: edit, reply, collapse/expand.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12634, T8131
Differential Revision: https://secure.phabricator.com/D17905
Summary:
Ref T12634. Fixes T12633. These events allow the keyboard reticle to resize properly.
(I expect to possibly hide/disable the reticle in the future during edits, but at least make the behavior sensible for now.)
Test Plan:
- Used "n" to select a block.
- Clicked a line number in that block to start a new inline comment.
- Saw reticle resize properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12634, T12633
Differential Revision: https://secure.phabricator.com/D17904
Summary: Ref T12634. Fixes T10049. Toggling an inline currently leaves the reticle oddly-positioned.
Test Plan:
- Selected a comment with the keyboard.
- Collapsed it.
- Saw reticle behave reasonably.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12634, T10049
Differential Revision: https://secure.phabricator.com/D17903
Summary: Fixes T12632. Ref T12634. Currently, the keyboard focus reticle does not redraw properly after a window resize.
Test Plan:
- Used "n" to select a block.
- Resized the window.
- Saw the reticle also resize properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12634, T12632
Differential Revision: https://secure.phabricator.com/D17901
Summary: Ref T8047. Ref T12634. When we sleep, hide the reticle. Restore it when we wake.
Test Plan:
- With Quicksand enabled..
- Used "j" to select a change in a revision.
- Navigated away by clicking a link.
- WOW! Reticle vanished properly!
- Used "back" to return.
- Reticle returned properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12634, T8047
Differential Revision: https://secure.phabricator.com/D17900
Summary:
Ref T12634. Using keyboard shortcuts in Differential currently relies on focus behavior in `KeyboardShortcutManager`.
This possibly made sense long ago, but no longer does, and leads to a whole slew of bugs where the reticle doesn't interact properly with anything else.
Move it to Differential so it can be made reasonably aware of edit operations, Quicksand navigation, etc.
This just moves the code; future diffs will actually fix bugs.
Test Plan: Used "n", "j", etc., saw the same behavior as before.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12634
Differential Revision: https://secure.phabricator.com/D17899
Summary: Ref T12616. This makes "edit" and "reply" work again.
Test Plan:
Used "e" and "r" to edit and reply.
Also used them in bogus ways and got useful UI feedback.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17895
Summary: Ref T12616. This moves most keyboard shortcuts into DiffChangesetList. It breaks some shortcuts that I plan to restore later, noted in T12616 (toggle file, edit inline, reply to inline), since I think ripping them out now and rebuilding them in a little bit will make things much simpler.
Test Plan:
- Used j, k, n, p, J, K shortcuts to navigate a revision.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17859
Summary:
Ref T12616. This moves "reply" to the new stuff and deletes DifferentialInlineEditor, which no longer does anything.
(This breaks some keyboard shortcuts, but I'll rebase D17859 shortly.)
Test Plan: Replied to inlines; things seemed to work properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17894
Summary:
Ref T12616. This makes creating inlines use the new code.
Creation and editing is now slightly more consistent in how it uses nodes. This will simplify the next change (replies), which I ran into some trouble with in an earlier iteration.
Note that this (and other changes in the series) allow you to create and edit multiple inlines simultaneously. This is mostly a feature, although I expect we'll need to lock it down a little bit. I have some UI ideas to help avoid errors.
Test Plan: Created inlines on a single line; on a range of lines; on the same line; multiple inlines at the same time.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17893
Summary:
Ref T12616. This moves the delete actions to the new, more stateful way of doing things.
These are a little tricky because you can click "Delete" on an inline, but you can also click "Delete" from the preview area at the bottom of the page. If you do, the inline you are deleting may or may not be present on the page.
This has a few bugs -- notably, deleting from the preview without interacting with the on-page inline first won't actually delete the on-page inline yet -- but nothing too serious.
Test Plan: Deleted inlines, undid deletion, deleted from preview.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17890
Summary:
Ref T12616. This updates clicking the "Done" checkbox for the new stuff.
This one is pretty clean since the "Done" checkbox doesn't do too much weird magic.
Test Plan: Clicked the box a few times.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17888
Summary:
Ref T12616. This doesn't pull over everything (some UI feedback didn't make it yet, and you can't cancel + undo cancelling edits yet) but editing comments technically works.
This is a little shaky, but feels less shaky than every other approach I've tried, so I think I'm finally on a reasonable track here.
Test Plan: Edited some inline comments.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17887
Summary:
Ref T12616. Fixes T12153. Currently, when you hide inlines, they hide completely and turn into a little bubble on the previous line.
Instead, collapse them to a single line one-by-one. Narrowly, this fixes T12153.
In the future, I plan to make these changes so this feature makes more sense:
- Introduce global "hide everything" states (T8909) so you can completely hide stuff if you want, and this represents more of a halfway state between "nuke it" and "view it".
- Make the actual rendering better, so it says "epriestley: blah blah..." instead of just "..." -- and looks less dumb.
The real goal here is to introduce `DiffInline` and continue moving stuff from the tangled jungle of a million top-level behaviors to sensible smooth statefulness.
Test Plan:
- Hid and revealed inlines in unified and two-up modes.
- These look pretty junk for now:
{F4948659}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616, T12153
Differential Revision: https://secure.phabricator.com/D17861
Summary: Ref T12616. This cements the relationship between ChangesetList (parent container) and Changeset (child) and passes translations down so Changeset can use them to translate the text "Loading..."
Test Plan: Viewed loading changes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17846
Summary: Ref T12616. This ends up being a little messy ("one giant function") and maybe I'll clean it up a bit later, but continue consolidating the wild jungle of behaviors into a smaller set of responsible objects.
Test Plan: Clicked all the menu options, saw them work properly. Grepped for removed methods.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17845
Summary:
Ref T12616. Diffusion, only, has a "Show All Context" button which expands the full context on all changes.
I don't remember the exact history on this, but it hasn't existed in Differential for some time and no one has complained. I suspect that the "View Options > Show All Context" on each file may replace it. I can't really come up with good reasons to use it, offhand. If we want to restore it, I think global options after T1591 is promising.
{F4945561}
Test Plan:
- Loaded a commit in Diffusion, no longer saw a button.
- Grepped for relevant sigils.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17843
Summary: Ref T12616. This class is already mostly-reasonable as a representation of an individual changeset, so I plan to just adjust it a little bit.
Test Plan:
- Used `git grep` to search for `ChangesetViewManager`.
- Used `git grep` to search for `changeset-view-manager`.
- Browsed around and interacted with changesets.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17842
Summary: Ref T12616. Put these listeners in DiffChangesetList so the wake/sleep properly for Quicksand.
Test Plan:
- Added some logging.
- With quicksand, moved between diffs.
- Saw "load" and "show more" fire exactly once on each page, with the correct changeset list listener.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17841
Summary:
Ref T12616. Ref T8047. Ref T11093. We currently have several bugs where diff state sticks across Quicksand pages.
Add a new top-level object to handle this, with `sleep()` and `wake()` methods. In `sleep()`, future changes will remove/deacivate all the reticles/editors/etc.
See T12616 for high-level discussion of plans here.
This general idea is likely to become more formal eventually (e.g. for "sheets" or whatever we call them, in T10469) but I think this is probably a reasonable place to draw a line for now.
Test Plan:
- Added some logging to sleep(), wake() and construct().
- Viewed changes in Differential.
- With Quicksand on, browsed around; saw state change logs fire properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616, T11093, T8047
Differential Revision: https://secure.phabricator.com/D17840
Summary: Moves Conpherence to use EditEngine. This removes the "First Message" field, but I think that's ok until we have direct messaging of some sort, then maybe have built-ins cover that case.
Test Plan:
- Visit /new/ and /edit/ for creating new rooms.
- Edit a room in full conpherence
- Edit a room in durable column
- grep for METADATA calls
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11729
Differential Revision: https://secure.phabricator.com/D16677
Summary: This adds some basic per user / per room theming for Conpherence, which should hopefully let users identify rooms from just the sidebar color.
Test Plan: Lots of threads with different colors.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17747
Summary:
Ref T12562. I think the pre-send-on-enter behavior was: disable textarea, send message, clear area on response?
That got changed but not completely, maybe. There's currently an issue here:
- Add a `sleep(3)` to `UpdateController`.
- Type "AAA".
- Press enter.
- Real fast, type "BBB".
- When the "AAA" arrives, your "BBB" is lost. Sad!
Test Plan:
- Did the thing described above; no longer lost "BBB".
- Switched threads, sent messages, couldn't find anything else this breaks. It dates from a long time ago so I think it's just pre-SOE stuff.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12562
Differential Revision: https://secure.phabricator.com/D17742
Summary:
Fixes T12599. If you're faster than the network request, we don't actually resolve your query when the data arrives.
Instead, when the data shows up, run the query if the user has typed something.
Test Plan: Pasted a filename in real fast, got results. (Previously: no results until you press something else.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12599
Differential Revision: https://secure.phabricator.com/D17739
Summary:
Ref T12566. Ref T12563. This fixes three bugs with Aphlict replay stuff:
First, Conphernece would try to repaint the UI even if no thread was open. Only repaint when a thread is open.
Second, although we deduplicate JX.Leader messages, we didn't deduplicate actual notification messages. If you browsed the leader window, then it re-elected itelf as a leader and replayed history, it could rebroadcast notifications and other windows could show doubles. Deduplicate notifications to prevent this.
Third, we always replayed the last 60 seconds of history. When you browsed the leader window, whichever window became the new leader (possibly the one you just browsed) could replay messages from before it had opened, leading to duplicate messages. Particularly, after receiving a message and then browsing you could see that message again. Instead, only replay history as far back as when the window first opened.
Test Plan:
- Clicked "Repaint" with a thread open, saw a repaint. Clicked "Repaint" with Conpherence open but no thread, no repaint and no 404 request to `/update/null/`.
- In browser A, opened three windows. In browser B, sent a notification. In browser A, browsed the leader window away twice in a row. Observed that the window which never became a leader doesn't duplicate notifications.
- In browser A, opened three windows. In browser B, sent a notification. In browser A, browsed the leader window away over and over again. Observed that replay requests issued with appropriate history windows.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12566, T12563
Differential Revision: https://secure.phabricator.com/D17722
Summary: Ref T12573. This sends a "ping" to the server, and a "pong" back to the client, every 15 seconds. This tricks ELBs into thinking we're doing something useful and productive.
Test Plan: Ran `bin/aphlict debug`, loaded Phabricator, saw ping/pong in logs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12573
Differential Revision: https://secure.phabricator.com/D17717
Summary: Ref T12566. When we reconnect, refresh the current thread even if we replayed notifications.
Test Plan:
- Clicked the "Repaint" button, saw the thread refresh.
- Clicked the "Reconnect" button, saw the thread reresh.
- Launched `aphlict debug`, killed it, restarted it, saw the thread refresh after reconnect.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12566
Differential Revision: https://secure.phabricator.com/D17713
Summary:
Fixes T12564. We already had some code which seems to deal with this properly, it just wasn't getting used.
Assign each application-level notification a unique ID, then ignore messages with duplicate IDs.
Test Plan:
- In browser A, loaded `/T123`.
- In browser B, loaded `/T123`.
- Made a comment as B.
- Saw notification as A.
- Mashed "Replay" a bunch.
- Before patch: piles of duplicate notifications.
- After patch: no duplicates.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12564
Differential Revision: https://secure.phabricator.com/D17710
Summary:
Fixes T12563. If we've ever seen an "open", mark all future connections as reconnects. When we reconnect, replay recent history.
(Until duplicate messages (T12564) are handled better this may cause some notification duplication.)
Also emit a reconnect event (for T12566) but don't use it yet.
Test Plan: {F4912044}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12563
Differential Revision: https://secure.phabricator.com/D17708
Summary: Ref T12568. Ref T12567. Allows you to force a reconnect, and shows the reconnect delay on connection close/failure.
Test Plan: {F4911879}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12568, T12567
Differential Revision: https://secure.phabricator.com/D17705
Summary: Ref T12568. This begins building toward a more useful realtime debugging console for Leader/Aphlict/general realtime stuff.
Test Plan: {F4911521}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12568
Differential Revision: https://secure.phabricator.com/D17701
Summary: Fixes T12556 Uses more common components in ConpherenceThreadList by moving to PHUIListItemView. Reduces clutter by moving privacy into the header. Gets ride of "See More" double interchanges.
Test Plan:
I need to test this more, doesn't seem to auto-select top room any more, also might build a lipsum generator.
- Create lots of rooms with various policies
- Test clicking on policy object
- Click on different rooms
- Post in rooms
- Load up second account, see room numbers
- Clear room message count by clicking on room
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12556
Differential Revision: https://secure.phabricator.com/D17698
Summary: Fixes T12138. Test for the presence of being in fullscreen mode, and disable send on enter if present. Side note, I'd love a first class "hasClass" type Javelin function.
Test Plan:
- Go to Conpherence
- Type some smack, see it send on enter
- Go fullscreen like a boss
- Let the words flow
- Close fullscreen, then send on enter.
- (might be nice someday to add a "submit" button to fullscreen editor)
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12138
Differential Revision: https://secure.phabricator.com/D17590
Summary:
Ref T12314. Ref T6064. Ref T11580. If an install defines several different task create forms (like "Create Plant" and "Create Animal"), allow any of them to be created directly onto a workboard column.
This is just a general consistency improvement that makes Custom Forms and Workboards work together a bit better. We might do something fancier eventually for T6064 (which wants fewer clicks) and/or T11580 (which wants per-workboard control over forms or defaults).
Test Plan:
- Created several different types of tasks directly onto a workboard.
- Faked just one create form, saw the UI unchanged (except that it respects any renaming).
{F3492928}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12314, T11580, T6064
Differential Revision: https://secure.phabricator.com/D17446
Summary:
See downstream <https://phabricator.kde.org/T5404>. This code was doing some `.firstChild` shenanigans which didn't survive some UI refactoring.
This whole UI is a little iffy but just unbreak it for now.
Test Plan: Allowed and rejected desktop notifications, got largely reasonable UI rendering.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17388
Summary: Fixes T12248. Adds a flag for movable panels, and only allows those to be moved. Also cleaned up some CSS rules missing once a panel was drug into a new position.
Test Plan: Try to drag a tab panel content pane, cannot. Drag normal pane, see CSS, grab and drag same panel back, CSS looks the same.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12248
Differential Revision: https://secure.phabricator.com/D17356
Summary: Ref T12232. I can't reproduce the original issue, but this should probably fix it without side effects?
Test Plan: Added a card with Stripe, but I could do that before too.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12232
Differential Revision: https://secure.phabricator.com/D17333
Summary:
Fixes T12152. When creating a subproject task directly from a parent project, we can get column information back about the subproject column, which isn't visible. Just ignore this rather than trying to draw a card into a column which does not exist.
This flow (see test plan) is a little unintuitive since the card never appears on the workboard, but this class of things is probably roughly somewhere in T4900.
Test Plan:
- Create a parent project A.
- Create subproject B.
- On the workboard for A, select "Create Task..." from the dropdown.
- Add tag "B" in the dialog that pops up.
- Save the task.
Note that this flow creates a task tagged only with "B", since "A" and "B" are mutually exclusive tags.
Before patch: UI freezes (JX.Mask is never removed), JS error in console.
After patch: workflow completes. Note that card is (correctly) not visible: it's in an invisible subproject column.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12152
Differential Revision: https://secure.phabricator.com/D17242
Summary:
Earlier, I made some changes so that when you create or edit an inline, the comment at the bottom of the page updates (even though you didn't fiddle with the stacked actions inputs).
At the last second I broke them by spelling this wrong while cleaning things up, so they didn't actually work. Spell the property correctly ("showPreview", not "shouldPreview").
Also, we have some JS which rewrites "Not Visible" into "View", but it fires in an inconvenient way now and is flickery for me. Ideally this should get cleaned up slightly better eventualy, but at least make is stop doing so much flickery layout for now.
Test Plan:
- Wrote no comment on a revision.
- Added an inline.
- Saw comment preview properly update immediately.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17229
Summary:
See D17210. Currently, this handler needs to be installed on each menu that doesn't build with the default behavior.
Rather than copy-pasting it to the user menu, try to make it a default behavior. This adds a new rule: don't close the menu if the item is a dynamic item built in JS with PHUIXActionView.
This allows dynamic items to control the menu themselves, while giving static items the desired default behavior.
Test Plan:
- Opened menus on: dashboards, user menu, timeline comments. Clicked stuff. Menus went away.
- Other menus still seemed to work right: Diffusion, Favorites, mobile menu.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17222
Summary: Ref T5867. I sure love Javascript.
Test Plan: Navigated between Home, Diffusion and Differential, opening the user profile menu. Saw appropraite help items.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5867
Differential Revision: https://secure.phabricator.com/D17214
Summary: Fixes T12065. Some of the normal behavior of these actions got juggled when I made "Accept" and "Reject" conflict.
Test Plan:
- Added "Accept".
- Added "Reject", saw it remove "Accept".
- Added "Change Projects".
- Added "Assign/Claim".
- Removed "Assign/Claim".
- Removed "Accept".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12065
Differential Revision: https://secure.phabricator.com/D17143
Summary:
Ref T11114. When a user selects "Accept", and then selects "Reject", remove the "Accept". It does not make sense to both accept and reject a revision.
For now, every one of the "actions" conflicts: accept, reject, resign, claim, close, commandeer, etc, etc. I couldn't come up with any combinations that it seems like users are reasonably likely to want to try, and we haven't received combo-action requests in the past that I can recall.
Test Plan:
- Selected "Accept", then selected "Reject". One replaced the other.
- Selected "Accept", then selected "Change Subscribers". Both co-existed happily.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17132
Summary:
Ref T11114. Recent changes broke the links to jump to inline comments from the previews because they get hooked up with JS.
Restore the linking behavior.
Test Plan: Clicked "View" on an inline comment preview, jumped to that comment.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17131
Summary: Ref T11114. This comments nearly working on EditEngine. Only significant issue I caught is that the "View" link doesn't render properly because it depends on JS which is tricky to hook up. I'll clean that up in a future diff.
Test Plan: {F2279201}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17116
Summary: Reorgaizes the CSS here a bit, by object list style, adds in a new drag ui class, which will be used in menu ordering.
Test Plan:
Workboards, Home Apps.
{F2126266}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17057
Summary:
Persona is going to be decommed November 30th, 2016.
It is highly unlikely that anyone is currently using persona as a real
login method at this point.
Test Plan: tried locally to add auth adapter.
Reviewers: chad, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D16371
Summary: Fixes T11791. We do this in durable column, but not in regular Conpherence. I think this is the right place? Not sure how this will feel with high lag.
Test Plan: Submit lots of text in a Conpherence.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11791
Differential Revision: https://secure.phabricator.com/D16969
Summary: Redesign the action comment box for better use in two column, mobile, nuance.
Test Plan: Test in mobile / desktop / tablet, adding and removing actions. Actionless comment boxes, etc.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: cspeckmim, Korvin
Differential Revision: https://secure.phabricator.com/D16811
Summary: Ref T11809. These have been replaced with more flexible storage that accommodates a wider range of behaviors, including those in the ICS format and RRULEs.
Test Plan:
- Ran migration.
- Viewed, created, edited events.
- Grepped for all removed names/symbols.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11809
Differential Revision: https://secure.phabricator.com/D16789
Summary:
This feels a little cleaner:
- Clean up transaction log a bit.
- Use a checkbox instead of a two-option dropdown.
This is a little messy because the browser doesn't send anything if the user submits a form with an un-clicked checkbox.
We now send a dummy value ("Hey, there's definitely a checkbox in this form!") so the server can figure out what to do.
Test Plan:
- Edited all-dayness of an event.
- Viewed transaction log.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16776
Summary: I think maybe these should be more separate from JX.Title, but seems to work ok. May build new favicons just for messages though. Proof of concept UI.
Test Plan: Send message on one browser, see red icon in other browser. Click on menu, count and favicon switch back to normal.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16734
Summary: Fixes T11764. Moves rendering of the column to client-side, which can skip if it detects we're on mobile.
Test Plan: Open column on desktop, switch to mobile, don't see column. Toggle column on mobile on and off. Switch back to desktop.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11764
Differential Revision: https://secure.phabricator.com/D16725
Summary: This removes 'full-display', 'minimal-display' from Conpherence, which I recall was because we had 2 UIs for column and regular chat. I'm also tossing in slightly nicer search results, with a link to the actual message and the full date shown for context.
Test Plan: Post a message in mobile, tablet, full conpherence, and in durable column. Clean up UI in durable column. Do a search in Full UI, click on result date, get taken to the message... usually. My test data is a little wonky, but I think this works most of the time.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16710
Summary: This focuses the search field when the user opens search, and then the textarea for pontificate if the search box is closed.
Test Plan: Open/Close/Open/Close
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16709
Summary: I passed this in as a config, but need to parse it live when threads change, otherwise the wrong room could be searched.
Test Plan: Search in one room, click a second, search again, see correct results.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16707
Summary: Fixes the send on enter flash, only uses the `Threads` loading animation on changing threads, not sending a message.
Test Plan: Change threads, post a message.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16705
Summary: Adds a search bar toggle and results for searching inside a Conpherence Room. The UI of the results itself are not styled yet, and will follow up with another diff.
Test Plan: Go to Conpherence, search for "asdf", get lots of results. Search for nothing, get no change, search for something fictitious, get no threads found (will follow up with search result UI).
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16697
Summary: Ref T11730. Removes unused code since this is now it's own page.
Test Plan: rebuild maps, grep for javelin code, classnames
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11730
Differential Revision: https://secure.phabricator.com/D16700
Summary: When the durable column is re-opened, scroll user to latest message. Though later we should scroll them to the last read.
Test Plan: Minimize window, reload page, pop up window, see proper scroll position.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16649
Summary: A bit better styling, this adds an indication icon for if you're connected or not (and later, away, etc).
Test Plan: Test in Notifications menu, Conpherence full, Durable Column.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16647
Summary: Sends and stores additional body classes at the page level. Removes old ones, sets new ones.
Test Plan: home -> application search -> colored workboard -> config -> home with persistent chat open and minimized.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16646
Summary: This exposes the chat window to a larger audience beside people who accidentaly hit `\`.
Test Plan:
Lots of clicks and reloads.
{F1856043}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16643
Summary: This feels pretty reasonable with little effort, and I think I'd use it more than the full column.
Test Plan:
Chat a lot on various pages.... still some quicksand quirks around various pages.
{F1853487}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: scp, Korvin
Differential Revision: https://secure.phabricator.com/D16627
Summary: Fixes T11623. Enables send-on-enter and shift-enter for linebreaks, per durable column. Also cleaned up UI for Joining Room or Logging In.
Test Plan: See room I can join, click Join Room. Leave Room, Log out, visit room with login prompt. Login, Join Room again.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11623
Differential Revision: https://secure.phabricator.com/D16595
Summary:
Fixes T11703. This mostly avoids rounding errors.
If point values include "0.001", we also get three digits of precision: 1.000.
Maybe useful if your point field is called "bitcoins" or something.
Test Plan:
Before:
{F1851404}
After:
{F1851405}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11703
Differential Revision: https://secure.phabricator.com/D16601
Summary: Mostly quality of life in renames and moving everything to the view class. Minor CSS tweaks. Fix room handles getting added when adding a new user.
Test Plan: Add to room, remove from room.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16560
Summary:
Minor rebuild / redesign of Conpherence. Most of this is new UX and tossing out things like widgets, device fallbacks. I expect some of the UI to get more polished after next pass, but most everything here is in place.
- Removed "Widgets", now just a single Participants pane
- Added "Topic"
- New header
- Settings, Edit are action icons
- Removed a lot of JS
- Simplified CSS as much as I could
Test Plan:
Desktop, Tablet, Mobile. Adding and removing people. Setting new topics, new rooms.
{F1828662}
{F1828669}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16550
Summary: This adds a "column" icon into crumbs, like in workboards, for expanding or hiding the "Widget Pane". This is per user sticky and defaults to off.
Test Plan: View a Conpherence Room, see no widgets by default. Toggle it on, see widget. Reload page, see widget stick. Verify mobile, tablets ignore hiding.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10364
Differential Revision: https://secure.phabricator.com/D16533
Summary:
Moves search and new room out of crumb bar and into the thread column. This opens up space to add "Edit Room" into the crumbs area as an action link. Also removed 'widget-edit' pathways and javascript.
Fixes T8972
Test Plan:
Search, New, Edit rooms. Click different rooms, see correct URL each time.
{F1813226}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T8972
Differential Revision: https://secure.phabricator.com/D16543
Summary:
Two minor issues that I caught in the log while fixing Phame permissions:
- We had a JS bug which would cause us to immediately generate two comment previews at the exact same time -- one for loading the page, and one for "switching to desktop". Instead, only generate the "switch to desktop" preview if we really switched to desktop from a different device layout.
- These two requests could end up reading/writing the VersionedDraft table at exactly the same time fairly often (e.g., after a comment submission, the page would load, send two preview requests at exactly the same time, and they'd race fairly reliably for me locally). If we do race, recover from the race.
Test Plan:
Submitted some Phame comments.
- No more error log errors about VersionedDraft keys.
- Saw only one preview request when loading the page instead of two.
Here's the specific stack trace I caught:
```
[Mon Sep 05 12:15:33.639930 2016] [:error] [pid 50608] [client 127.0.0.1:55278] [2016-09-05 14:15:33] EXCEPTION: (AphrontDuplicateKeyQueryException) #1062: Duplicate entry 'PHID-POST-fknnpzjnsdgc3rqobhst-PHID-USER-pr5rjpuilpfserepsd2k-13' for key 'key_object' at [<phutil>/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:314]
[Mon Sep 05 12:15:33.640801 2016] [:error] [pid 50608] [client 127.0.0.1:55278] arcanist(head=master, ref.master=9e82ef979e81), corgi(head=master, ref.master=5b9171222bc9), instances(head=stable, ref.master=485bc8128198, ref.stable=2983bc917601), ledger(head=master, ref.master=4da4a24b8779), libcore(), phabricator(head=phame2, ref.master=4b6da9735ba7, ref.phame2=4b6da9735ba7), phutil(head=stable, ref.master=97f05269fdb1, ref.stable=c14343ee620e), services(head=stable, ref.master=1fcb5cdb7582, ref.stable=2d8088a5b4b3)
[Mon Sep 05 12:15:33.640815 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #0 <#2> AphrontBaseMySQLDatabaseConnection::throwCommonException(integer, string) called at [<phutil>/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:348]
[Mon Sep 05 12:15:33.640830 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #1 <#2> AphrontBaseMySQLDatabaseConnection::throwQueryCodeException(integer, string) called at [<phutil>/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:289]
[Mon Sep 05 12:15:33.640833 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #2 <#2> AphrontBaseMySQLDatabaseConnection::throwQueryException(mysqli) called at [<phutil>/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:185]
[Mon Sep 05 12:15:33.640836 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #3 <#2> AphrontBaseMySQLDatabaseConnection::executeRawQuery(string) called at [<phutil>/src/xsprintf/queryfx.php:8]
[Mon Sep 05 12:15:33.640839 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #4 <#2> queryfx(AphrontMySQLiDatabaseConnection, string, string, string, array, string)
[Mon Sep 05 12:15:33.640841 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #5 <#2> call_user_func_array(string, array) called at [<phutil>/src/aphront/storage/connection/AphrontDatabaseConnection.php:42]
[Mon Sep 05 12:15:33.640844 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #6 <#2> AphrontDatabaseConnection::query(string, string, string, array, string) called at [<phabricator>/src/infrastructure/storage/lisk/LiskDAO.php:1261]
[Mon Sep 05 12:15:33.640846 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #7 <#2> LiskDAO::insertRecordIntoDatabase(string) called at [<phabricator>/src/infrastructure/storage/lisk/LiskDAO.php:1106]
[Mon Sep 05 12:15:33.640849 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #8 <#2> LiskDAO::insert() called at [<phabricator>/src/infrastructure/storage/lisk/LiskDAO.php:1075]
[Mon Sep 05 12:15:33.640851 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #9 <#2> LiskDAO::save() called at [<phabricator>/src/applications/draft/storage/PhabricatorVersionedDraft.php:65]
[Mon Sep 05 12:15:33.640854 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #10 <#2> PhabricatorVersionedDraft::loadOrCreateDraft(string, string, integer) called at [<phabricator>/src/applications/transactions/editengine/PhabricatorEditEngine.php:1669]
[Mon Sep 05 12:15:33.640857 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #11 <#2> PhabricatorEditEngine::buildCommentResponse(PhamePost) called at [<phabricator>/src/applications/transactions/editengine/PhabricatorEditEngine.php:894]
[Mon Sep 05 12:15:33.640859 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #12 <#2> PhabricatorEditEngine::buildResponse() called at [<phabricator>/src/applications/phame/controller/post/PhamePostEditController.php:60]
[Mon Sep 05 12:15:33.640862 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #13 <#2> PhamePostEditController::handleRequest(AphrontRequest) called at [<phabricator>/src/aphront/configuration/AphrontApplicationConfiguration.php:237]
[Mon Sep 05 12:15:33.640865 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #14 phlog(AphrontDuplicateKeyQueryException) called at [<phabricator>/src/aphront/handler/PhabricatorAjaxRequestExceptionHandler.php:27]
[Mon Sep 05 12:15:33.640868 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #15 PhabricatorAjaxRequestExceptionHandler::handleRequestException(AphrontRequest, AphrontDuplicateKeyQueryException) called at [<phabricator>/src/aphront/configuration/AphrontApplicationConfiguration.php:644]
[Mon Sep 05 12:15:33.640870 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #16 AphrontApplicationConfiguration::handleException(AphrontDuplicateKeyQueryException) called at [<phabricator>/src/aphront/configuration/AphrontApplicationConfiguration.php:242]
[Mon Sep 05 12:15:33.640873 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #17 AphrontApplicationConfiguration::processRequest(AphrontRequest, PhutilDeferredLog, AphrontPHPHTTPSink, MultimeterControl) called at [<phabricator>/src/aphront/configuration/AphrontApplicationConfiguration.php:149]
[Mon Sep 05 12:15:33.640879 2016] [:error] [pid 50608] [client 127.0.0.1:55278] #18 AphrontApplicationConfiguration::runHTTPRequest(AphrontPHPHTTPSink) called at [<phabricator>/webroot/index.php:17]
```
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16494
Summary: Ref T11132. This gets rid of the red bar for admins and instead shows a new menu item next to notifications/chat if there are unresolved configuration issues. Menu goes away if there are no issues. May move this later into the bell icon, but think think might be the right place to start especially for NUX and updates. Maybe limit the number of items?
Test Plan:
Tested with some, lots, and no config issues.
{F1790156}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16461
Summary:
Fixes T11468. I was able to find //a// reproduction case for the issue, at least, described in my comments there.
When the server sends back position information for columns we aren't displaying, for whatever reason, just ignore that information.
Future work in T4900 to do more synchronization may revisit this.
Test Plan: See T11468#190177 for steps. Did that stuff with this patch, got a clean edit.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11468
Differential Revision: https://secure.phabricator.com/D16397
Summary:
Ref T11326. Currently, we link Calendar days using hidden DOM nodes.
This is nice because it's simple, and right-clicking a day works properly. However, it's a bit ugly/unintuitive, messy, and unclear. It's especially messy because days are really two different rows, one for events and one for day/week numbers.
Instead, use JS to highlight day cells. You can still right-click by clicking the actual day number, which seems like a reasonable compromise.
Test Plan: {F1738941}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16334
Summary:
Ref T11326. When an event is all-day, hide the time controls for the start/end dates. These aren't used and aren't helpful/useful.
This got a little more complicated than it used to be because EditEngine forms may have only some of these controls present.
Test Plan: Edited an all-day event; edited a normal event; swapped an event between normal and all-day.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16327
Summary: Ref T11326. This just cleans things up a little and removes some of the obvious layout/CSS issues.
Test Plan:
- Viewed day view before/after. Also viewed profile panel.
Before:
{F1725547}
After:
{F1725548}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16308
Summary: Fixes T9202.
Test Plan:
- Viewed day in 12-hour, saw "8:00 PM".
- Viewed day in 24-hour, saw "16:00".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9202, T10932
Differential Revision: https://secure.phabricator.com/D16290
Summary:
Ref T4788. This fixes all the bugs I was immediately able to catch:
- "Directory-Like" graph shapes could draw too many vertical lines.
- "Reverse-Directory-Like" graph shapes could draw too few vertical lines.
- Terminated, branched graph shapes drew the very last line to the wrong place.
This covers the behavior with tests, so we should be able to fix more stuff later without breaking anything.
Test Plan:
- Added failing tests and made them pass.
{F1708158}
{F1708159}
{F1708160}
{F1708161}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788
Differential Revision: https://secure.phabricator.com/D16216
Summary: Ref T6523. Allows you to click stuff instead of using drag-and-drop.
Test Plan: On iOS simulator, created and updated a mock.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6523
Differential Revision: https://secure.phabricator.com/D16088
Summary: Bumping this up higher since two column views get extra tight fast below 900 px. This felt most correct to me, dialing it back from first attempt at 960. Mostly I don't want to ever accidentally trigger it when I'm on the 12" MacBook. Ref T10926
Test Plan: Durable Column, Workboards, Dashboards, Tasks.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: avivey, Korvin
Maniphest Tasks: T10926
Differential Revision: https://secure.phabricator.com/D15960
Summary: Fixes T10816. The way these work is a little unusual since these chunks of file-rendering code are unusuall performance-sensitive, so the Differential version doesn't adapt directly to Diffusion. Both can possibly be unified at some point in the future, although they do slightly different things.
Test Plan: {F1220170}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10816
Differential Revision: https://secure.phabricator.com/D15719
Summary:
Ref T10698. Currently, we show the spacer/continuation lines around previews, but these don't make sense in previews.
(Other stuff also uses this code so I can't simply remove `spacer`.)
Test Plan:
Before:
{F1199924}
After:
{F1199925}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10698
Differential Revision: https://secure.phabricator.com/D15562
Summary:
Fixes T10646. When you load the page or click "New Condition" or "New Action", we try to add a condition and action with some default values.
Currently, the logic just sets everything to `null` or `'default'`. This technically works in Safari, but is less successful in Chrome. (I think Safari prevents you from picking an invalid value.)
Instead of relying on the browser to pick the right value, set the correct value explicitly.
Test Plan:
- Created a new rule in Chrome, Safari.
- Added fields and conditions in Chrome, Safari.
- Edited existing rules in Chrome, Safari.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10646
Differential Revision: https://secure.phabricator.com/D15507
Summary: See Q335. This might need some tweaking, but the JS works now so we can move/style the node now.
Test Plan:
{F1169168}
- Also dragged stuff around, saw counts update properly.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15462
Summary:
These columns were conflating `projectPHID` (the defualt project to add to the task) with `boardPHID` (the board the column appears on).
Separate them to fix the beahvior.
Test Plan: Used "Add Task" from dropdown menu of a milestone column on a parent project's workboard.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15242
Summary: Ref T4427.
Test Plan:
- Dragged a 17 XP task from "Hunting" to "Slain".
- Saw 17 XP move.
- Level up!
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4427
Differential Revision: https://secure.phabricator.com/D15237
Summary:
Ref T4900. Briefly:
- Much more layout and rendering is now done in Javascript.
- This should otherwise be identical to the behavior at HEAD, except that:
- editing a task and removing the current board from it no longer removes the task; and
- points still don't work.
However, this can now plausibly support realtime workboard updates and other complex state-based behaviors like points calculations in a future change.
Test Plan:
- Changed card covers.
- Moved cards.
- Sorted board by priority and natural.
- Added new cards.
- Edited cards in place.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15234
Summary:
Ref T4900. To eventually support realtime board updates, we need to be able to perform a board state update without the context of the action which caused it.
For example, if the server says "update card Y", we need to know what to do without being told "card Y was moved from column A to column B" explicitly. Currently, all the update code relies on knowing what happened and which nodes were affected.
This is only a small step forward, but starts making things a bit more independent and consistent.
Test Plan:
- Moved cards around.
- Changed card cover images.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15228
Summary:
Ref T4900. The root problem is that dragging stuff near the bottom of the board can cause jittery, jumpy behaviors.
Internal scrolling has changed the nature of this problem. Previously, the height of the board itself would jump around, but it's now fixed so the height of columns jumps around instead.
We could take the same approach and add a chunk to the bottom of each column when a drag starts, but this is really distracting visually since it's obvious to the user.
Instead, treat columns as infinitely tall (so dragging beneath them still counts as dragging to the bottom position).
Test Plan:
- View a board with a column taller than the screen (has a scrollbar).
- Drag a card to near the bottom position.
- Move the mouse down a little bit at a time, continuing toward the bottom of the page.
- Before patch: at some point, UI flips out and starts rapidly adding, scrolling, and removing the ghost.
- After patch: sensible behavior, ghost is in bottom position for all cursor locations.
Also works for dragging to the top.
(This leaves us with a little less dead space for cancelling drags, but you've still got the left menu, anything offscreen, and the escape key, which seems fine.)
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15227
Summary:
Ref T4900. This gets moves on the new stuff and cleans them up a little.
Two behaviors haven't been ported yet: height adjustment during drags (which is broken anyway with inner scroll) and updating point counts (coming soon).
Test Plan: Dragged cards around on a board, including top/bottom positions and normal/priority sort.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15226
Summary: Ref T4900. Continuing to move this over into a more structured approach.
Test Plan: Panned a workboard.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15225
Summary:
Ref T4900. Broadly, workboard state management is fairly ad-hoc now, which makes things like this (where some kind of edit affects global state) difficult:
- Updating points header to reflect a sum change after dragging a task.
- Changing progress bars after editing a task to change resolution or points value.
- Moving a card to the correct column after editing it and changing subprojects/iterations.
- Responding to real-time notifications about other users moving cards.
This begins rewriting the code in a way that can better accommodate these kinds of far-reaching state update.
This change just moves cover image stuff. I'll continue moving features one at a time until boards work better.
Test Plan: Updated some cover images.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15224
Summary:
Ref T5240. For boards with a lot of columns and users without "shift + mousewheel" or a touchpad, allow click-drag on the board background to pan the board horizontally.
The `ew-resize` cursor cue might be a little too intense. If it's annoying, we could drop it and just leave this as a secret feature to discover.
Test Plan: Panned the board horizontally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5240
Differential Revision: https://secure.phabricator.com/D15211
Summary: This was slightly more complex than I believed, but not too terrible.
Test Plan:
{F1096126}
- Also used some normal file uploaders to make sure I didn't break that.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15202
Summary:
Fixes T4136.
When listing projects in the "Visible To" selector control:
- Instead of showing every project you are a member of, show only a few.
- Add an option to choose something else which isn't in the menu.
- If you've used the control before, show the stuff you've selected in the recent past.
- If you haven't used the control before or haven't used it much, show the stuff you've picked and them some filler.
- Don't offer milestones.
- Also don't offer milestones in the custom policy UI.
Test Plan:
{F1091999}
{F1092000}
- Selected a project.
- Used "find" to select a different project.
- Saw reasonable defaults.
- Saw favorites stick.
- Tried to typeahead a milestone (nope).
- Used "Custom Policy", tried to typeahead a milestone (nope).
- Used "Custom Policy" in general.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4136
Differential Revision: https://secure.phabricator.com/D15184
Summary:
Ref T10010. These aren't perfect but I think (?) they aren't horribly broken.
- When a project is a parent project, destroy (as far as the user can tell) any custom columns.
- When a project has milestones, automatically generate columns on the project's workboard (if it has a workboard).
- When you move tasks between milestones, add the proper milestone tag.
- When you move tasks out of milestones back into the backlog, add the proper parent project tag.
- (Plenty of UI / design stuff to adjust.)
Test Plan:
- Dragged stuff between milestone columns.
- Used a normal workboard.
- Wasn't able to find any egregiously bad cases that did anything terrible.
{F1088224}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15171
Summary:
Ref T5240. This probably has some bugs and doesn't quite work in Firefox (fine on boards, not quite on the task list -- some issue with body or document being special, I think).
I think this is close enough that we can throw it out there and see how users manage to break it, though. It's not worse than what we've got now? I think?
Test Plan:
dragged things near the edge of other things
they seemed to move around OK
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5240
Differential Revision: https://secure.phabricator.com/D10188
Summary:
Ref T5240.
- Add proper class when dropping cards.
- Add proper class when creating new cards.
- Make X-drag explicit so that it works if there's only one column.
- Stop tootips when dragging, resume them after dropping.
- Move CSS rule for consistency.
- Allow user to hit "Escape" to cancel an in-progress drag.
Test Plan:
- Dropped cards.
- Created new cards.
- X-dragged on a workboard with one column and a dashboard.
- Dragged over a tooltip (no tip), dropped, moused over tooltip (tip).
- Hit escape during a drag.
Reviewers: chad
Reviewed By: chad
Subscribers: cspeckmim
Maniphest Tasks: T5240
Differential Revision: https://secure.phabricator.com/D15163
Summary:
Mostly, this has just been sitting in my sandbox for a long time. I may also touch some charting stuff with subprojects/milestones, but don't have particular plans to do that.
D3 seems a bit more flexible, and it's easier to push more of the style logic into CSS so you can fix my design atrocities. gRaphael also hasn't been updated in ~3+ years.
Test Plan:
{F1085433}
{F1085434}
Reviewers: chad
Reviewed By: chad
Subscribers: cburroughs, yelirekim
Differential Revision: https://secure.phabricator.com/D15155
Summary:
Fixes T10229. Broadly:
- When the user hovers over a line number or inline comment, we update the yellow reticle to highlight the relevant lines. Specifically, this is in response to a `mouseover` event.
- On touch devices, touches fire `mouseover` and if you mutate the DOM inside the event, the device aborts the touch.
To remedy this:
- Distingiush between mouse-originated and touch-originated cursor events.
- We do this, roughly, by setting a flag when we see "touchstart", and clearing it when we see the second copy of any unique cursor event.
- This method is complex, but should be robust to any implementation differences between devices (for example, it will work no matter which order the events are fired in).
- This method should also produce the correct results on weird devices that have both mouse-devices and touch-devices available for cursor input.
- When we see a touch-originated `mouseover` or `mouseout`, don't mutate the DOM.
- Put an extra DOM mutation into the `click` event to improve highlighting behavior on touch devices.
Test Plan:
- In iOS Simulator (4s, iOS 9.2), clicked various inline actions ("Reply", "Hide", "Done", "Cancel", line numbers, etc). Got responses after a single touch.
- Verified hover + click behavior on a desktop.
- Logged and examined a bunch of events as a general sanity check.
Reviewers: chad
Reviewed By: chad
Subscribers: aljungberg
Maniphest Tasks: T10229
Differential Revision: https://secure.phabricator.com/D15136
Summary:
Fixes T10190. This is still a touch weird (newly typed tokens lose icons when copied) but basically works correctly. Saving/editing rules is fine, just some minor display glitching.
Fixing the icon thing is a little more involved.
Test Plan: Swapped Herald tokenizer fields around saw values (approximately) preserved.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10190
Differential Revision: https://secure.phabricator.com/D15077
Summary: These are old project image choices, remove and only go with FontAwesome related images.
Test Plan: Project -> Edit Picture -> Save
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15051
Summary: Ref T10054. Allows users to drag menu items to reorder them.
Test Plan: Reordered a project menu.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15011
Summary: Fixes T10139. This clarification seems reasonable to me.
Test Plan:
- Viewed a revision with context.
- Clicked "Show All Context".
- Saw "All Context Shown".
{F1060624}
{F1060625}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10139
Differential Revision: https://secure.phabricator.com/D15009
Summary: Fixes T10116.
Test Plan:
- Prior to patch: Control/Command + Enter submitted form but ignored actions.
- After patch: verifid command + enter submits actions.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10116
Differential Revision: https://secure.phabricator.com/D14991
Summary:
Fixes T9323. Two minor fixes:
- On the first commit, don't render a downward line.
- Clean up a 1px spacing issue that had cropped up a while ago when we added icons or something, I think.
Test Plan:
Before:
{F1057248}
After:
{F1057249}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9323
Differential Revision: https://secure.phabricator.com/D14974
Summary:
Ref T10004. This might be a little too funky or magical, but is probably not necessary too often and easier than doing new layout with the CSS.
Also make the desktop icons a little meatier.
Test Plan: Swiped things away on mobile. Clicked things away on desktop.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10004
Differential Revision: https://secure.phabricator.com/D14857
Summary:
Fixes T1895. Now that we have on-demand prviews, we can use them on mobile. On mobile:
- don't show live previews;
- only save drafts every 10 seconds.
Also, show fewer remarkup buttons on mobile to try to make sure the more important ones (preview, e.g.) fit.
Test Plan:
- Made window narrower and wider to trigger preview/no-preview behavior.
- Used DarkConsole to verify request rate.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T1895
Differential Revision: https://secure.phabricator.com/D14856
Summary: Fixes T9871. Ref T10004. These won't win any awards but it fixes them being incredibly weird and confusing.
Test Plan:
{F1029090}
- Tried to use controls, got reasonable behavior.
- Used normal controls to make sure I didn't break anything.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9871, T10004
Differential Revision: https://secure.phabricator.com/D14814
Summary:
Ref T9908. Fixes T6205.
This is largely some refactoring to improve the code. The new structure is:
- Each EditField has zero or one "submit" (normal edit form) controls.
- Each EditField has zero or one "comment" (stacked actions) controls.
- If we want more than one in the future, we'd just add two fields.
- Each EditField can have multiple EditTypes which provide Conduit transactions.
- EditTypes are now lower-level and less involved on the Submit/Comment pathways.
Test Plan:
- Added and removed projects and subscribers.
- Changed task statuses.
- In two windows: added some subscribers in one, removed different ones in the other. The changes did not conflict.
- Applied changes via Conduit.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6205, T9908
Differential Revision: https://secure.phabricator.com/D14789
Summary:
Fixes T9995. I think letting users customize slugs is not a hugely compelling as a product feature, and this fixes the issue with slugs that have "/" characters in them and makes the move to EditEngine easier since I don't have to deal with the weird JS thing.
Instead, just generate slugs automatically. No more JS, no more separate field, things automatically update if you rename a blog, and now that URIs have IDs in them the old URI will still work after a rename.
Test Plan:
- Applied migration.
- Created new posts.
- Edited existing posts.
- Visited various posts.
- Created a post with a bunch of "/" in the title, things still worked fine.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9995
Differential Revision: https://secure.phabricator.com/D14792
Summary:
Ref T9132. Ref T9908. Puts reordering UI in place:
- For create forms, this just lets you pick a UI display order other than alphabetical. Seems nice to have.
- For edit forms, this lets you create a hierarchy of advanced-to-basic forms and give them different visibility policies, if you want.
Test Plan:
{F1017842}
- Verified that "Edit Thing" now takes me to the highest-ranked edit form.
- Verified that create menu and quick create menu reflect application order.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132, T9908
Differential Revision: https://secure.phabricator.com/D14704
Summary:
Fixes T7848. @jasonfsmitty discussed an issue in great detail there and in D14359, and I completely missed it. Specifically:
- If you save a "Change status to: Open" rule in Maniphest, and then edit it again, the token shows "Unknown Object (???)" instead of the correct token.
- That's because loadHandles() has no idea what to do with the value "open", since it's not a real PHID.
The way we render tokenizer tokens in Herald is quite hacky right now. Fortunately, I wrote a //slightly// better way for EditEngine yesterday or the day before. Use the slightly better way to fix the issue with D14359.
This could still be better than it is, but the badness is mostly hidden now and can be cleaned up later without impacting anything.
Test Plan: Edited a Herald rule with projects and status changes, saw proper tokens.
Reviewers: chad
Reviewed By: chad
Subscribers: jasonfsmitty
Maniphest Tasks: T7848
Differential Revision: https://secure.phabricator.com/D14682
Summary:
Ref T9132. Fixes T4580. Thhat might actually have been fixed a while ago or something since it describes a buggy/bad interaction which doesn't reproduce for me at HEAD.
This saves and restores all the stacked actions (subscribers, projects, etc) so that you don't lose anything if you close a window by accident.
Test Plan:
Added a bunch of actions in various states, reloaded the page, draft stuck around.
Submitted form, actions didn't stick around anymore.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4580, T9132
Differential Revision: https://secure.phabricator.com/D14675
Summary:
Ref T9132. We currently have an old preview/draft behavior and a new actions behavior.
Let the actions behavior do drafts/previews too, so we can eventually throw away the old thing.
This is pretty much just copying the old behavior into the new one, but with a few tweaks. The major change is that we submit all the stacked actions behavior now, so the preview reflects everything the change will do (and, soon, we can save it in the draft in a consistent way).
Also includes one hack-fix that I'll clean up at some point.
Test Plan: Added a bunch of stacked actions and observed meaningful previews.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14672
Summary: Ref T9132. Supports selects in stacked actions and adds "Change Status" + "Change Priority".
Test Plan: Changed status and priority from stacked actions.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14667
Summary: Ref T9132. Shhh this never happened shhhhhhh.
Test Plan: Selected multiple actions, saw them add at the bottom.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14664
Summary:
Ref T9132. Like D14659, I'll hold this until after the cut.
This swaps commenting in Maniphest over to EditEngine / stackable actions. New code doesn't have parity yet, although none of the things we're missing should technically be //strictly mandatory//. There's a list inline. I'll restore these in the next diffs.
Briefly -- comments, subscribers and projects work. Status, owners and priority do not yet.
Test Plan:
- Made comments and added subscribers and projects.
- Read through the old code to look for missing features and tried to document them all.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14663
Summary: Ref T9132. This still has a lot of rough edges but the basics seem to work OK.
Test Plan: {F1012627}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14653
Summary: Reuse PHUIMarkupPreviewView in Phame for consistency, less custom code. Also, doesn't work (JS issue).
Test Plan: New Post, Edit Post, Save Post
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14552
Summary:
Ref T9132. This just makes edited forms do //something//, albeit not anything very useful yet.
You can now edit a form and:
- Retitle it;
- add a preamble (instructions on top of the form); and
- reorder the form's fields.
Test Plan:
{F974632}
{F974633}
{F974634}
{F974635}
{F974636}
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14503
Summary:
Ref T182. Replace the total mess we had before with a sort-of-reasonable element.
This automatically updates using "javascript".
Test Plan:
{F901983}
{F901984}
Used "Land Revision", saw the land status go from "Waiting" -> "Working" -> "Landed" without having to mash reload over and over again.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14314
Summary:
Ref T9524. Because fetching the last time files were modified in Diffusion can be slow, we bring it in over Ajax.
The logic to fetch and paint the table is kind of fragile because there are two different definitions of the columns right now and we break in a bad way if they differ.
In particular, calling `diffusion.updatecoverage` can populate a "lint commit" for a repository, which tries to generate lint information in one of the views (but not the other one).
In the longer run I think we're removing some of the concepts here and this rendering should be rebuilt to not have two separate column definitions, but just make it degrade gracefully for now since those are larger changes.
Test Plan:
Reproduced the issue in T9524 by calling `diffusion.updatecoverage` on a repostiory. Specifically, this has a side effect of creating a "lint commit" which triggers a "lint" column in this table, sort of.
Applied this patch, got a clean render.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9524
Differential Revision: https://secure.phabricator.com/D14243
Summary: Fixes T8572. Ideally we would probably just permit this, but clean up the behavior until the day arrives when inline code is actually rewritten.
Test Plan:
- Tried to launch editors in Differential and Diffusion while comments were already open.
- Verified that "Jump to inline" works in both cases.
{F788008}
{F788009}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8572
Differential Revision: https://secure.phabricator.com/D14094
Summary: Fix T8710. I had hopes of doing something cleaver with `highlighted` (Like trying to understand `foo.bar` when clicking `bar`, but I obviously didn't do it.
Test Plan: ctrl-click.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: joshuaspence, epriestley, gena2x, Korvin
Maniphest Tasks: T8710
Differential Revision: https://secure.phabricator.com/D13550
Summary:
Fixes T8501.
When losing focus while holding ctrl, we never get a key-up event; ctrl-f/d/tab make the browser tab lose focus.
So treat 'blur' (unfocus) as if the user released ctrl.
Test Plan: ctrl-f/ctrl-d/ctrl-tab, ctrl-click-outside-of-window, and move mouse over the content - see no help suggestions.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Maniphest Tasks: T8501
Differential Revision: https://secure.phabricator.com/D13260
Summary: Ref T6920, This just removes the old voting UI from Ponder.
Test Plan: Visit a Question, no voting UI
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T6920
Differential Revision: https://secure.phabricator.com/D13827
Summary:
Ref T8726. Herald actions are technically sort-of modular already, but make them more aggressively modular similar to `HeraldField`.
I plan to obsolete and replace `HeraldCustomAction`.
Test Plan: Saw actions in nice groups; created and ran a "Do Nothing" action. Transcripts are a bit rough for now.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13646
Summary:
Ref T8726. Some adapters now have a large number of fields, and we lost the sort-of-human-readable implicit ordering when fields were modularized.
Instead, group and sort fields.
Test Plan: {F603066}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13619
Summary: Ref T8726. This gets rid of all the `VALUE_*` constants and lets Fields provide arbitrary typeaheads without upstream/JS changes.
Test Plan: Used all tokenizers. Used "Another Herald Rule". Grepped for all removed constants.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13616
Summary:
Ref T8726. I'm primarily trying to modularize tokenizer values so we don't have to update JS to add a new one.
This is ultimately the blocker for "select" custom fields working in Herald.
This inches us toward that. I'm //not// modularizing conditions or control types in this round, but hope to end up with hard-coded conditions (which are highly general and very rarely change), hard-coded control types (which are also highly general and very rarely change) and completely modular fields and values (which have mid-to-low generality and change frequently).
Test Plan: Used UI to interact with "none", "text", and new-style "select" controls. No actual support for tokenizers yet.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13613
Summary: Ref T8099, Fixes T8338. This allows re-ordering of Maniphest Tasks in the redesign. Somehow seems more fragile, but I couldn't break anything with it.
Test Plan: Try ordering into first position after header, last position, changing priority outright, everything I can drag.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8099, T8338
Differential Revision: https://secure.phabricator.com/D13487
Summary:
We use a non-standard way to invoke the edit dialogue (title, picture, etc) via the crumb. Stop doing that and instead use the widget technology to invoke the dialogue.
This requires making the widget handling code a bit more nuanced as nothing has wanted to pop a dialogue before. I plan to clean this up as I add the action to "Mark as Favorite" to the UI. In particular, I want to stop rendering the un-used DOM and make a workflow-based widget action a property as opposed to something hardcoded. This may be too ambitious depending on how similar these workflows are....
This also updates the ThreadSearchEngine to be a bit more modern. Additionally, go through making some user-facing strings a bit more sensical.
Test Plan: changed settings from conpherence full and durable column successfully.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D13449
Summary:
Ref T8488, T8469, T8485.
This is done in regards to T8488 as far as users are concerned. There's still some classes, and etc. that should be re-named probably. T8469 and T8485 are basically moot now though.
Rather than having "Send Message" exposed, just expose "Create Room". Users get the full form. One change is "title" is now required.
This diff removes the concept of "isRoom" entirely.
Test Plan: Verifed a user with no conpherences had sensible data in both column view and full conpherence view. Created rooms with various policies and things worked well.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: chad, epriestley, Korvin
Maniphest Tasks: T8469, T8485, T8488
Differential Revision: https://secure.phabricator.com/D13351
Summary:
Ref T8637. This does nothing interesting, just has empty scaffolding for a bulk job queue.
Basic idea is that when you do something like a batch edit in Maniphest, we:
- Create a BulkJob with all the details.
- Queue a worker to start the job.
- Send you to a progress bar page for the job.
In the background:
- The "start job" worker creates a ton of Task objects, then queues worker tasks to do the work.
In the foreground:
- Fancy ajax animates the progress bar and it goes wooosh.
In general:
- Big jobs actually work.
- Jobs get logged.
- You can monitor jobs.
- Terrible junk like T8637 should be much harder to write and much easier to catch and diagnose.
Test Plan:
No interesting code/beahavior yet. Clean `storage adjust`.
{F526411}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8637
Differential Revision: https://secure.phabricator.com/D13392
Summary: Ref T8095. This weird grey table has no remaining callsites and can be removed.
Test Plan: Grepped for symbols.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8095
Differential Revision: https://secure.phabricator.com/D13379
Summary:
Fixes T4139. Adds a "Desktop Notifications" panel to settings. For now, we start with "Send Desktop Notifications Too" functionality. We can try to be fancy later and only send desktop notifications if the web app doesn't have focus, etc.
Test Plan:
Made some comments as a test user on a task and got purdy desktop notifications using Chrome. Then did it again with Firefox.
Played around with permissions form with Chrome and got helpful information about what was up. Played around with Firefox and got similar results, except canceling the dialogue didn't invoke my handler code somehow. Oh Firefox!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: rbalik, tycho.tatitscheff, joshuaspence, epriestley, Korvin
Maniphest Tasks: T4139
Differential Revision: https://secure.phabricator.com/D13219
Summary:
Ref T5681. Policy rules can now select objects they can apply to, so a rule like "task author" only shows up where it makes sense (when defining task policies).
This will let us define rules like "members of thread" in Conpherence, "subscribers", etc., to make custom policies more flexible.
Notes:
- Per D13251, we need to do a little work to get the right options for policies like "Maniphest > Default View Policy". This should allow "task" policies.
- This implements a "task author" policy as a simple example.
- The `willApplyRule()` signature now accepts `$objects` to support bulk-loading things like subscribers.
Test Plan:
- Defined a task to be "visible to: task author", verified author could see it and other users could not.
- `var_dump()`'d willApplyRule() inputs, verified they were correct (exactly the objects which use the rule).
- Set `default view policy` to a task-specific policy.
- Verified that other policies like "Can Use Bulk Editor" don't have these options.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5681
Differential Revision: https://secure.phabricator.com/D13252
Summary: Ref T8498. This editor is an artifact of the Old World at this point, but it still works fine.
Test Plan: Moved tasks between spaces using the batch editor.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8498
Differential Revision: https://secure.phabricator.com/D13249
Summary: Ref T8498. Allow Herald rules to act on the Space which contains an object.
Test Plan:
- Wrote a "Space is any of..." rule, created tasks that matched and failed the rule.
- Also created a Pholio rule with the "Space..." condition.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8498
Differential Revision: https://secure.phabricator.com/D13242
Summary: Fixes T8489. Regression in D13058. Re-write this so a) works and b) works as well cross browser as possible. (big guess on b)
Test Plan: visited /Z1 vs /Z1?settings and saw people widget vs settings widget as respective defaults.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8489
Differential Revision: https://secure.phabricator.com/D13228
Summary: Fixes T6713. Though I've said that before. =D Looks like this handler wasn't upgraded earlier and was still updating the DOM; removing the DOM updating code and let the central spot handle everything and this works fine.
Test Plan: open up two browsers with durable column on same room. send messages in browser a and observe 1 copy of each message showing up in browser b. send messages in browswer b and observe one copy in browser a. browser a was chrome and browser b was firefox.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T6713
Differential Revision: https://secure.phabricator.com/D13214
Summary: Fixes T8458, Show informative errors when attempting to set a recurrence end date on a non-recurring event.
Test Plan: Create new event, set recurrence end date via date-picker without setting the "is recurring" checkbox, and attempt to save. Should get error saying there cannot be a recurrence end date on a non-recurring event.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T8458
Differential Revision: https://secure.phabricator.com/D13192
Summary: Ref T8099, hashtag#yolo. Adds back the original gradients plus a 'light' theme. Unclear which should be default, but we can play with it until a decision needs to be made.
Test Plan: Change colors a lot, turn on durable column.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8099
Differential Revision: https://secure.phabricator.com/D13146
Summary: Ref T8357, DRAFT, recurring events need optional end dates
Test Plan: Edit recurring event, set end date, save, recurring ghosts should not generate after end date
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8357
Differential Revision: https://secure.phabricator.com/D13088
Summary:
Refs T8302.
V1 of the implementation. This replaces the previous mode, but I guess there's no real reason we can't have
some symbols always clickable and the rest require modifier.
I'm also a little concerned about discoverability; Holding down ctrl/cmd will make the cursor change, so there's
some hint that something might be up, but that's probably not obvious enough.
Test Plan:
Tested in diffusion and differential and differential comments on:
- Windows/Chrome,
- Windows/IE 11
- LInux/Firefox 38
- Mac/Chrome
- Mac/Safari
Reviewers: chad, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley, joshuaspence
Maniphest Tasks: T8302
Differential Revision: https://secure.phabricator.com/D13034
Summary: Fixes T8329. I was able to figure out a reasonable way to have the full conpherence default to the email settings panel. I think this is cleaner than making things a dialogue as I rambled about in the description for T8329.
Test Plan: using /bin/mail to verify correct email links were generated for conpherence notifications and maniphest (general) notifications.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8329
Differential Revision: https://secure.phabricator.com/D13058
Summary: Fixes T8328. Somewhere along the line we stopped posting to the server with no text. Make sure if the action is join_room that we ping the server even if no text is specified.
Test Plan: tried to send an empty message and failed; nothing happened when I clicked. tried to join a room with an empty message and it worked
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8328
Differential Revision: https://secure.phabricator.com/D13041
Summary:
Ref T7447. Implements per-viewer comment hiding. Once a comment is obsolete or uninteresting, you can hide it completely.
This is sticky per-user.
My hope is that this will strike a better balance between concerns than some of the other approaches (conservative porting, summarization, hide-all).
Specifically, this adds a new action here:
{F435621}
Clicking it completely collapses the comment into a small icon on the previous line, and saves the comment state as hidden for you:
{F435626}
You can click the icon to reveal all hidden comments below the line.
Test Plan:
- Hid comments.
- Showed comments.
- Created, edited, deleted and submitted comments.
- Used Diffusion comments (hiding is not implemented there yet, but I'd plan to bring it there eventually if it works out in Differential).
Reviewers: btrahan, chad
Reviewed By: btrahan
Subscribers: jparise, yelirekim, epriestley
Maniphest Tasks: T7447
Differential Revision: https://secure.phabricator.com/D13009
Summary: The JS and PHP representations of state can differ; just have the JS write the state out immediately on page load.
Test Plan: Saved `diffusion.fields` without making changes, reloaded, saw no effective change.
Reviewers: joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12998
Summary: Ref T8300, clicking in day view should create new event
Test Plan: Open day view, click in an empty slot, new event modal should open.
Reviewers: epriestley, #blessed_reviewers, chad
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T8300
Differential Revision: https://secure.phabricator.com/D12990
Summary: Ref T8300, Rescheduling events by dragging them in day view
Test Plan: Open day view, drag events, observe them reschedule.
Reviewers: chad, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T8300
Differential Revision: https://secure.phabricator.com/D12988
Summary: Ref T8300, Translating day view into javascript, actually
Test Plan: should be no user facing changes. should look the same as it did before.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8300
Differential Revision: https://secure.phabricator.com/D12985
Summary: Ref T8300, First step towards a Javelin behavior for Calendar day view
Test Plan: No user facing changes.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8300
Differential Revision: https://secure.phabricator.com/D12978
Summary: Fixes T4846. These are one off (for now) since they have various crazy actions with them. I think this will get unified and more cleaned up when we refine the UI for taking multiple actions at once, etc.
Test Plan: noted no "commented on x" in either maniphest or differential. starting making a comment and noted prevew showed. started adding a subscriber (added to tokenizer) and preview showed.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T4846
Differential Revision: https://secure.phabricator.com/D12936
Summary: Fixes T8182. See screenshot in that task. We currently render a line to nowhere at the bottom of these previews. Instead, only render a line at the top.
Test Plan:
{F409078}
Also looked at a couple other applications that use this and they looked correct.
Reviewers: btrahan, lpriestley, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T8182
Differential Revision: https://secure.phabricator.com/D12905
Summary:
Fixes T7977.
- Move Indexed Languages and See Symbols From config to Repository
- Make symbol search skip projects
This also makes the default languages to Everything instead of Nothing.
Test Plan:
- Browse files, click symbols.
- Use quick search to find symbols
- Browse revision, click symbols
Reviewers: joshuaspence, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T7977
Differential Revision: https://secure.phabricator.com/D12687
Summary:
Fixes T8194. If you loaded a conpherence directly via a URI like /Z1 or /conpherence/1/ we didn't correctly cache the loaded transactions such that sending a message would only show that message and subsequent messages.
Fix is to build the cache properly in this case. Note this codepath is different because the server sends back more of the thread data in the initial request.
Test Plan: loaded a conpherence directly, sent messages, paged back, everything kept showing!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8194
Differential Revision: https://secure.phabricator.com/D12844
Summary:
Fixes T6713. Before this diff, we would update the DOM when various requests came back, but the logic to erase race conditions proved too tricky for me to get right. Instead, change the algorithm up and keep a set of transaction ids around per thread. When its time to update the transactions, sort the list of ids and just render the whole darn set again.
To make this work, this ends up adding transacton ids to fake transactons like "show older" and date markers. This is able to work by using a float sort and giving these transactions ids that are .5 from being an integer and in the right place numerically.
Test Plan: for durable column, clicked show older and it worked. sent a message and it worked. for main view, clicked show older and it worked. sent a message and it worked.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6713
Differential Revision: https://secure.phabricator.com/D12819
Summary:
Fixes T8009. This was basically moving the behavior from conpherence full behavior menu into the ConpherenceThreadManager so it could be re used in the durable column.
The durable column bit has no special styles - its just a link - but it seems to work well enough. I think it could be removed altogether if / when we add some automagical scrolling back into history stuff.
Test Plan: loaded up a conpherence in a durable column and used 'show older messages' successfully. loaded up a conpherence in regular view mid transaction and used show older and show newer successfully
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8009
Differential Revision: https://secure.phabricator.com/D12816
Summary: Fixes T8155. The former "init_board()" function was aptly named as it needs to be called each time a new board dom piece is downloaded. Ergo, break out a setup() function and call that in the once-only setup place, and use init_board() there as well as when we have a quicksand redraw event with data from the server.
Test Plan: paged about a project and was able to keep dragging and dropping tasks on various loads of the board. verified drops saved correctly from load to load.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8155
Differential Revision: https://secure.phabricator.com/D12798
Summary: don't bother with margin class if column isn't visible. Ref T8151.
Test Plan:
using chrome with trackpad
- loaded home with toggled off column - noted no margin class erroneously applied
- toggled column off and on - correct
- loaded home with toggled on column - correct
- toggled column off and on - correct
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8151
Differential Revision: https://secure.phabricator.com/D12795
Summary:
Ref T8151. This is option (5). It needs a few adjustments but feels pretty good. Major issues are:
- Without a mouse, the scrollbars overlap by default, so we //must// move the column off the right margin.
- Scrolling sometimes "bleeds" between the chat vs the main frame in a way that's not as discrete as the old framed content, but feels generally reasonable to me.
If we pursue this, I'd plan to make these additional changes:
- Move the panel away from the right margin only if the page scrollbars are zero-width (i.e., in OSX trackpad mode).
- Fix the notch in the upper right corner when the chat is moved away from the right margin.
- Probably remove the body "overflow-y: scroll" on Conpherence and Workboards.
- Update the resizing code to deal with 300px vs 315px widths.
- We can probably clean up some JX.Scrollbar "main panel" code.
Here's the "bad" case, where I've visually separated the column to provide room for a scrollbar. This isn't ideal, but looks and feels OK to me:
{F398375}
Test Plan:
- Tried Firefox, Chrome, Safari, with and without a mouse.
- Tried normal Conpherence.
Reviewers: btrahan, chad
Reviewed By: btrahan
Subscribers: avivey, epriestley
Maniphest Tasks: T8151
Differential Revision: https://secure.phabricator.com/D12789
Summary: Closes T8021, All day events should disable time editing in edit view
Test Plan: Edit all day event, time text fields should be disabled. Unchecking all-day should show time fields.
Reviewers: chad, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8021
Differential Revision: https://secure.phabricator.com/D12774
Summary: Ref T7708. Rather than invoking the general client -> server dropdown refresh path, return the data with the various conpherence requests and update the dropdowns that way. Saves 2 client -> server requests per conpherence action.
Test Plan: loaded up /conpherence/ and noted message count deduct correctly. clicked specific message and noted message count deduct successfully. did same two tests via durable column and again saw message counts deduct successfully.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7708
Differential Revision: https://secure.phabricator.com/D12761
Summary: Fixes T8118. Turns out this also was broken in the main view if e.g. you went to just /conpherence/. The fix is to make sure the threadmanager js class explicitly manages subscriptions as the loaded thread changes.
Test Plan:
- from /conpherence/ was able to receive messages in real time.
- from /conpherence/ changed threads and still received messages in real time
- from durable column switched threads and received messages in real time
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8118
Differential Revision: https://secure.phabricator.com/D12758
Summary:
Ref T7755. T7755#107290 reproduced for me reliably and now it does not. Cleaned up the logic around in flight updates as it was not correct.
Not sure this is enough to close T7755, but maybe?
Test Plan: T7755#107290 no longer reproduces!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6713, T7755
Differential Revision: https://secure.phabricator.com/D12755
Summary: Fixes T8098. This parameter was being misinterpreted over the wire.
Test Plan: Replied to left-side inline, got left-side reply.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8098
Differential Revision: https://secure.phabricator.com/D12747
Summary: First cut of redesign branch, simpler, lighter header. Will check in new graphics in follow up diff.
Test Plan: Mostly all just new colors, but this also removes setting of `header-color` in Config.
Reviewers: epriestley, btrahan
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12745
Summary: Fixes T8036. In addition to making the mock edit work, this tightens quicksand code such that the correct page id is returned even if start() has not been called yet. It also tightens mock view where some functions should respect statics.enabled a bit more.
Test Plan:
clicked edit mock, mock crumb, edit mock, mock crum, edit mock, made edits and they worked! clicked edit mock, mock crumb, edit mock, mock crumb, edit mock, profile icon, hit browser back to edit mock, made edits and they worked!
also observed mock view page not occasionally wigging out from image_onload race not having statics.enabled respect during the above
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8036
Differential Revision: https://secure.phabricator.com/D12739
Summary: Ref T8036. This was a lot of JS to fiddle with.
Test Plan: viewed a mock with durable column open, clicked back to pholio home, then clicked back to mock and was able to switch images. clicked to profile and then hit browser back and was still able to switch images.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8036
Differential Revision: https://secure.phabricator.com/D12727
Summary: Fixes T7254. This reverts the previous functionality, but makes pertinent updates like scaling the images to 35 x 35. Codebase had moved on quite a bit so far from a straight revert but nothing too tricky relative to the code that was here before. This does not allow for changing the images from the conpherence durable column view -- that would require some JS trickery, but also doesn't fit into the current notion of the column being "light". Can always modify this later.
Test Plan:
- from full conpherence, uploaded a square pic and things looked nice
- from full conpherence, uploaded a rectangular pic and wasnt happy, so reinvoked edit dialog and used crop control to make it better
- noted could not update picture from conpherence durable column
- used different user and noted could see custom picture
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: CodeMouse92, Korvin, epriestley
Maniphest Tasks: T7254
Differential Revision: https://secure.phabricator.com/D12648
Summary: Fixes T7757. Since anchor links can't be processed server side, we have to detect the message is old in javascript, then re-loaded the page. This opens up a new corner case where we have to paginate in newer messages, so this also adds support for that.
Test Plan:
- set main query limit to 8 and then visited ZXX#YYY. noted a second quick load of YYY, that YYY ended up highlighted and scrolled to.
- used "show newer messages" and "show older messages" successfully, taking care to make sure transaction ids were all correct with no off by one errors, etc.
- opened and closed durable column to make sure that still works too
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7757
Differential Revision: https://secure.phabricator.com/D12633
