Summary: Ref T13515. External editor URIs currently depend on repositories having callsigns, but callsigns are no longer required. Add some variables to support configuring this feature for repositories that do not have callsigns.
Test Plan: Changed settings to use new variables, saw links generate appropriately.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21147
Summary:
Ref T13515.
- Previously valid editor URIs may become invalid without being changed (if an administrator removes a protocol from the list, for example), but this isn't explained very well. Show an error on the settings page if the current value isn't usable.
- Generate a list of functions from an authority in the parser.
- Generate a list of protocols from configuration.
Test Plan: {F7370872}
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21146
Summary:
Ref T13515. Settings currently has some highly specialized code for rendering "Changes saved." messages. The "saved" state is communicated across a redirect-after-POST by adding `/saved/` to the end of the URI.
This isn't great. It needs a lot of moving pieces, including special accommodations in routing rules. It's user-visible. It has the wrong behavior if you reload the page or navigate directly to the "saved" URI.
Try this scheme, which is also pretty sketchy but seems like an upgrade on the balance:
- Set a cookie on the redirect which identifies the form we just saved.
- On page startup: if this cookie exists, save the value and clear it.
- If the current page started with a cookie identifying the form on the page, treat the page as a "saved" page.
This supports passing a small amount of state across the redirect-after-POST flow, and when you reload the page it doesn't keep the message around. Applications don't need to coordinate it, either. Seems somewhat cleaner?
Test Plan: In Firefox, Safari, and Chrome: saved settings, saw a "Saved changes" banner without any URI junk. Reloaded page, saw banner vanish properly.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21144
Summary:
Ref T13515. Currently, opening a file to a particular line in an external editor relies on replacing "%l" with "%l" (which is escaped as "%25l") on the server, and then replacing "%25l" with the line number on the client. This will fail if the file path (or any other variable) contains "%l" in its unencoded form.
The parser also can't identify invalid variables.
Pull the parser out, formalize it, and make it generate an intermediate representation which can be sent to the client and reconstituted.
(This temporarily breaks Diffusion and permanently removes the weird, ancient integration in Dark Console.)
Test Plan:
- Added a bunch of tests for the actual parser.
- Used "Open in Editor" in Differential.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21143
Summary: Ref T13515. No callsites actually use this, most editors don't support it, it doesn't seem terribly useful for the ones that do, it makes template-based APIs for line-number substitution complicated, and we can probably just loop on `window.open()` anyway.
Test Plan: Grepped for affected symbols, found no more references. Loaded settings page, saw no more setting.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21142
Summary:
Ref T13515. It's not intuitive that these settings are "Display Preferences", even thought they're intenrally related to some of the other display preferences.
Give them a separate group.
Test Plan: {F7370500}
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21140
Summary: Fixes T13405. We currently offer non-global custom saved queries here, but this doesn't make sense as a global default setting.
Test Plan: Saved a global search query, edited global search settings, no longer saw the non-global query as an option.
Maniphest Tasks: T13405
Differential Revision: https://secure.phabricator.com/D20793
Summary: Fixes T13405. The default behavior of the global search bar isn't currently configurable, but can be made configurable fairly easily.
Test Plan: Changed setting as an administrator, saw setting reflected as a user with no previous preference. As a user with an existing preference, saw preference retained.
Maniphest Tasks: T13405
Differential Revision: https://secure.phabricator.com/D20787
Summary:
Depends on D20670. Ref T13343. The user activity message log types are currently hard-coded, so only upstream code can really use the log construct.
Under the theory that we're going to keep this log around going forward (just focus it a little bit), modularize things so the log is extensible.
Test Plan:
Grepped for `UserLog::`, viewed activity logs in People and Settings.
(If I missed something here -- say, misspelled a constant -- the effect should just be that older logs don't get a human-readable label, so stakes are very low.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13343
Differential Revision: https://secure.phabricator.com/D20671
Summary: Depends on D20668. Ref T13343. Just an easy cleanup/simplification while I'm here.
Test Plan: `grep` for `getActionConstant()`
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13343
Differential Revision: https://secure.phabricator.com/D20669
Summary:
See <https://discourse.phabricator-community.org/t/unhandled-exception-when-logging-in-with-mfa/2828>. The recent changes to turn `msort()` on a vector an error have smoked out a few more of these mistakes.
These cases do not meaningfully rely on sort stability so there's no real bug being fixed, but we'd still prefer `msortv()`.
Test Plan: Viewed MFA and External Account settings panels. Did a `git grep 'msort(' | grep -i vector` for any more obvious callsites, but none turned up.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20587
Summary:
See downstream <https://phabricator.wikimedia.org/T902>. Currently, timezones are rendered with their raw internal names (like `America/Los_Angeles`) which include underscores.
Replacing underscores with spaces is a more human-readable (and perhaps meaningfully better for things like screen readers, although this is pure speculation).
There's some vague argument against this, like "administrators may need to set a raw internal value in `phabricator.timezone` and this could mislead them", but we already give a pretty good error message if you do this and could improve hinting if necessary.
Test Plan: Viewed timezone list in {nav Settings} and the timezone "reconcile" dialog, saw a more-readable "Los Angeles".
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20559
Summary:
Ref T13263. Two minor issues:
- The "reconcile" dialog shows the wrong sign because JS signs differ from normal signs (for example, PST or PDT or whatever we're in right now is shown as "UTC+7", but should be "UTC-7").
- The big dropdown of possible timezones lumps "UTC+X:30" timezones into "UTC+X".
Test Plan:
- Reconciled "America/Nome", saw negative UTC offsets for "America/Nome" and "America/Los_Angeles" (previously: improperly positive).
- Viewed the big timzone list, saw ":30" and ":45" timezones grouped/labeled more accurately.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13263
Differential Revision: https://secure.phabricator.com/D20314
Summary: Ref T13250. See D20149. Mostly: clarify semantics. Partly: remove magic "null" behavior.
Test Plan: Poked around, but mostly just inspection since these are pretty much one-for-one.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13250
Differential Revision: https://secure.phabricator.com/D20154
Summary:
Depends on D20119. Fixes T9512. When you don't have a password on your account, the "Password" panel in Settings is non-obviously useless: you can't provide an old password, so you can't change your password.
The correct remedy is to "Forgot password?" and go through the password reset flow. However, we don't guide you to this and it isn't really self-evident.
Instead:
- Guide users to the password reset flow.
- Make it work when you're already logged in.
- Skin it as a "set password" flow.
We're still requiring you to prove you own the email associated with your account. This is a pretty weak requirement, but maybe stops attackers who use the computer at the library after you do in some bizarre emergency and forget to log out? It would probably be fine to just let users "set password", this mostly just keeps us from having two different pieces of code responsible for setting passwords.
Test Plan:
- Set password as a logged-in user.
- Reset password on the normal flow as a logged-out user.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: revi
Maniphest Tasks: T9512
Differential Revision: https://secure.phabricator.com/D20120
Summary:
Depends on D20113. Ref T6703. Continue moving toward a future where multiple copies of a given type of provider may exist.
Switch MFA from session-MFA at the start to one-shot MFA at the actual link action.
Add one-shot MFA to the unlink action. This theoretically prevents an attacker from unlinking an account while you're getting coffee, registering `alIce` which they control, adding a copy of your profile picture, and then trying to trick you into writing a private note with your personal secrets or something.
Test Plan: Linked and unlinked accounts. Refreshed account. Unlinked, then registered a new account. Unlinked, then relinked to my old account.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T6703
Differential Revision: https://secure.phabricator.com/D20117
Summary: Depends on D20112. Ref T6703. When you go to unlink an account, unlink it by ID. Crazy!
Test Plan: Unlinked and relinked Google accounts.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T6703
Differential Revision: https://secure.phabricator.com/D20113
Summary:
Ref T13250. A handful of callsites are doing `getRequestURI()` + `setQueryParams(array())` to get a bare request path.
They can just use `getPath()` instead.
Test Plan: See inlines.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13250
Differential Revision: https://secure.phabricator.com/D20150
Summary:
Depends on D20115. See <https://discourse.phabricator-community.org/t/transaction-search-endpoint-does-not-work-on-differential-diffs/2369/>.
Currently, `getApplicationTransactionCommentObject()` throws by default. Subclasses must override it to `return null` to indicate that they don't support comments.
This is silly, and leads to a bunch of code that does a `try / catch` around it, and at least some code (here, `transaction.search`) which doesn't `try / catch` and gets the wrong behavior as a result.
Just make it `return null` by default, meaning "no support for comments". Then remove the `try / catch` stuff and all the `return null` implementations.
Test Plan:
- Grepped for `getApplicationTransactionCommentObject()`, fixed each callsite / definition.
- Called `transaction.search` on a diff with transactions (i.e., not a sourced-from-commit diff).
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: jbrownEP
Differential Revision: https://secure.phabricator.com/D20121
Summary:
Depends on D20105. Fixes T7732. T7732 describes a case where a user had their Google credentials swapped and had trouble regaining access to their account.
Since we now allow email login even if password auth is disabled, it's okay to let users unlink their final account, and it's even reasonable for users to unlink their final account if it is mis-linked.
Just give them a warning that what they're doing is a little sketchy, rather than preventing the workflow.
Test Plan: Unlinked my only login account, got a stern warning instead of a dead end.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T7732
Differential Revision: https://secure.phabricator.com/D20106
Summary:
Ref T6703. Replaces the small "link" icon with a more obvious "Link External Account" button.
Moves us toward operating against `$config` objects instead of against `$provider` objects, which is more modern and will some day allow us to resolve T6703.
Test Plan: Viewed page, saw a more obvious button. Linked an external account.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T6703
Differential Revision: https://secure.phabricator.com/D20105
Summary: Depends on D20039. Ref T13242. If installs want users to install a specific application, reference particular help, etc., let them customize the MFA enrollment message so they can make it say "if you have issues, see this walkthrough on the corporate wiki" or whatever.
Test Plan:
{F6164340}
{F6164341}
{F6164342}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13242
Differential Revision: https://secure.phabricator.com/D20043
Summary:
Depends on D20033. Ref T13222. Flesh this UI out a bit, and provide bit-strength information for TOTP.
Also, stop users from adding multiple SMS factors since this is pointless (they all always text your primary contact number).
Test Plan:
{F6156245}
{F6156246}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D20034
Summary: Ref T13222. Providers can now be deprecated (existing factors still work, but users can't add new factors for the provider) or disabled (factors stop working, also can't add new ones).
Test Plan:
- Enabled, deprecated, and disabled some providers.
- Viewed provider detail, provider list.
- Viewed MFA settings list.
- Verified that I'm prompted for enabled + deprecated only at gates.
- Tried to disable final provider, got an error.
- Hit the MFA setup gate by enabling "Require MFA" with no providers, got a more useful message.
- Immediately forced a user to the "MFA Setup Gate" by disabling their only active provider with another provider enabled ("We no longer support TOTP, you HAVE to finish Duo enrollment to continue starting Monday.").
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D20031
Summary:
Depends on D20020. Ref T13222. This puts another step in the MFA enrollment flow: pick a provider; read text and click "Continue"; actually enroll.
This is primarily to stop CSRF attacks, since otherwise an attacker can put `<img src="phabricator.com/auth/settings/enroll/?providerPHID=xyz" />` on `cute-cat-pix.com` and get you to send yourself some SMS enrollment text messages, which would be mildly annoying.
We could skip this step if we already have a valid CSRF token (and we often will), but I think there's some value in doing it anyway. In particular:
- For SMS/Duo, it seems nice to have an explicit "we're about to hit your phone" button.
- We could let installs customize this text and give users a smoother onboard.
- It allows the relatively wordy enroll form to be a little less wordy.
- For tokens which can expire (SMS, Duo) it might save you from answering too slowly if you have to go dig your phone out of your bag downstairs or something.
Test Plan: Added factors, read text. Tried to CSRF the endpoint, got a dialog instead of a live challenge generation.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D20021
Summary:
Depends on D20019. Ref T13222. Currently, TOTP uses a temporary token to make sure you've set up the app on your phone properly and that you're providing an answer to a secret which we generated (not an attacker-generated secret).
However, most factor types need some kind of sync token. SMS needs to send you a code; Duo needs to store a transaction ID. Turn this "TOTP" token into an "MFA Sync" token and lift the implementation up to the base class.
Also, slightly simplify some of the HTTP form gymnastics.
Test Plan:
- Hit the TOTP enroll screen.
- Reloaded it, got new secrets.
- Reloaded it more than 10 times, got told to stop generating new challenges.
- Answered a challenge properly, got a new TOTP factor.
- Grepped for removed class name.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D20020
Summary:
Depends on D20018. Ref T13222. When you add a new MFA configuration, you can technically (?) guess your way through it with brute force. It's not clear why this would ever really be useful (if an attacker can get here and wants to add TOTP, they can just add TOTP!) but it's probably bad, so don't let users do it.
This limit is fairly generous because I don't think this actually part of any real attack, at least today with factors we're considering.
Test Plan:
- Added TOTP, guessed wrong a ton of times, got rate limited.
- Added TOTP, guessed right, got a TOTP factor configuration added to my account.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D20019
Summary:
Depends on D20016. Ref T920. This does nothing interesting on its own since the TOTP provider has no guidance/warnings, but landing it separately helps to simplify an upcoming SMS diff.
SMS will have these guidance messages:
- "Administrator: you haven't configured any mailer which can send SMS, like Twilio."
- "Administrator: SMS is weak."
- "User: you haven't configured a contact number."
Test Plan: {F6151283} {F6151284}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D20017
Summary:
Depends on D20013. Recently, I renamed the "Account" panel to "Language".
When you land on "Settings" and the first panel is an "EditEngine" panel ("Account/Langauge", "Date and Time", and "Conpherence" are all "EditEngine" panels), the engine shows the controls for the first panel.
However, the "first panel" according to EditEngine and the "first panel" in the menu are currently different: the menu groups panels into topics.
When I renamed "Account" to "Language", it went from conicidentally being the first panel in both lists to being the second panel in the grouped menu list and the, uh, like 12th panel in the ungrouped raw list.
This made landing on "Settings" show you the right chrome, but show you a different panel's controls ("Conpherence", now alphabetically first).
Instead, use the same order in both places.
(This was also a pre-existing bug if you use a language which translates the panel names such that "Account" is not alphabetically first.)
Test Plan: Visited "Settings", saw "Date & Time" form controls instead of "Conpherence" form controls on the default screen with "Date & Time" selected in the menu.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20016
Summary:
Depends on D20010. Ref T920. Allow users to designate which contact number is "primary": the number we'll actually send stuff to.
Since this interacts in weird ways with "disable", just do a "when any number is touched, put all of the user's rows into the right state" sort of thing.
Test Plan:
- Added numbers, made numbers primary, disabled a primary number, un-disabled a number with no primaries. Got sensible behavior in all cases.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D20011
Summary:
Depends on D20006. Ref T13222. Currently, the "MFA Is Required" gate doesn't let you do anything else, but you'll need to be able to access "Contact Numbers" if an install provides SMS MFA.
Tweak this UI to give users limited access to settings, so they can set up contact numbers and change their language.
(This is a little bit fiddly, and I'm doing it early on partly so it can get more testing as these changes move forward.)
Test Plan: {F6146136}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D20008
Summary:
Depends on D19988. See D19826 for the last UI expansion. I don't have an especially strong product rationale for un-fixed-width'ing Settings since it doesn't suffer from the "mystery meat actions" issues that other fixed-width UIs do, but I like the full-width UI better and the other other fixed-width UIs all (?) have some actual rationale (e.g., large tables, multiple actions on subpanels), so "consistency" is an argument here.
Also rename "account" to "language" since both settings are language-related.
This moves away from the direction in D18436.
Test Plan:
Clicked each Settings panel, saw sensible rendering at full-width.
{F6145944}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20005
Summary:
Ref T920. To send you SMS messages, we need to know your phone number.
This adds bare-bone basics (transactions, storage, editor, etc).
From here:
**Disabling Numbers**: I'll let you disable numbers in an upcoming diff.
**Primary Number**: I think I'm just going to let you pick a number as "primary", similar to how email works. We could imagine a world where you have one "MFA" number and one "notifications" number, but this seems unlikely-ish?
**Publishing Numbers (Profile / API)**: At some point, we could let you say that a number is public / "show on my profile" and provide API access / directory features. Not planning to touch this for now.
**Non-Phone Numbers**: Eventually this could be a list of other similar contact mechanisms (APNS/GCM devices, Whatsapp numbers, ICQ number, twitter handle so MFA can slide into your DM's?). Not planning to touch this for now, but the path should be straightforward when we get there. This is why it's called "Contact Number", not "Phone Number".
**MFA-Required + SMS**: Right now, if the only MFA provider is SMS and MFA is required on the install, you can't actually get into Settings to add a contact number to configure SMS. I'll look at the best way to deal with this in an upcoming diff -- likely, giving you partial access to more of Setings before you get thorugh the MFA gate. Conceptually, it seems reasonable to let you adjust some other settings, like "Language" and "Accessibility", before you set up MFA, so if the "you need to add MFA" portal was more like a partial Settings screen, maybe that's pretty reasonable.
**Verifying Numbers**: We'll probably need to tackle this eventually, but I'm not planning to worry about it for now.
Test Plan: {F6137174}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: avivey, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D19988
Summary:
Ref T13222. Users configure "Factor Configs", which say "I have an entry on my phone for TOTP secret key XYZ".
Currently, these point at raw implementations -- always "TOTP" in practice.
To support configuring available MFA types (like "no MFA") and adding MFA types that need some options set (like "Duo", which needs API keys), bind "Factor Configs" to a "Factor Provider" instead.
In the future, several "Factors" will be available (TOTP, SMS, Duo, Postal Mail, ...). Administrators configure zero or more "MFA Providers" they want to use (e.g., "Duo" + here's my API key). Then users can add configs for these providers (e.g., "here's my Duo account").
Upshot:
- Factor: a PHP subclass, implements the technical details of a type of MFA factor (TOTP, SMS, Duo, etc).
- FactorProvider: a storage object, owned by administrators, configuration of a Factor that says "this should be available on this install", plus provides API keys, a human-readable name, etc.
- FactorConfig: a storage object, owned by a user, says "I have a factor for provider X on my phone/whatever with secret key Q / my duo account is X / my address is Y".
Couple of things not covered here:
- Statuses for providers ("Disabled", "Deprecated") don't do anything yet, but you can't edit them anyway.
- Some `bin/auth` tools need to be updated.
- When no providers are configured, the MFA panel should probably vanish.
- Documentation.
Test Plan:
- Ran migration with providers, saw configs point at the first provider.
- Ran migration without providers, saw a provider created and configs pointed at it.
- Added/removed factors and providers. Passed MFA gates. Spot-checked database for general sanity.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19975
Summary:
Depends on D19919. Ref T11351. This method appeared in D8802 (note that "get...Object" was renamed to "get...Transaction" there, so this method was actually "new" even though a method of the same name had existed before).
The goal at the time was to let Harbormaster post build results to Diffs and have them end up on Revisions, but this eventually got a better implementation (see below) where the Harbormaster-specific code can just specify a "publishable object" where build results should go.
The new `get...Object` semantics ultimately broke some stuff, and the actual implementation in Differential was removed in D10911, so this method hasn't really served a purpose since December 2014. I think that broke the Harbormaster thing by accident and we just lived with it for a bit, then Harbormaster got some more work and D17139 introduced "publishable" objects which was a better approach. This was later refined by D19281.
So: the original problem (sending build results to the right place) has a good solution now, this method hasn't done anything for 4 years, and it was probably a bad idea in the first place since it's pretty weird/surprising/fragile.
Note that `Comment` objects still have an unrelated method with the same name. In that case, the method ties the `Comment` storage object to the related `Transaction` storage object.
Test Plan: Grepped for `getApplicationTransactionObject`, verified that all remaining callsites are related to `Comment` objects.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11351
Differential Revision: https://secure.phabricator.com/D19920
Summary:
Depends on D19918. Ref T11351. In D19918, I removed all calls to this method. Now, remove all implementations.
All of these implementations just `return $timeline`, only the three sites in D19918 did anything interesting.
Test Plan: Used `grep willRenderTimeline` to find callsites, found none.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11351
Differential Revision: https://secure.phabricator.com/D19919
Summary:
Ref T13222. Ref T13225. We store a digest of the session key in the session table (not the session key itself) so that users with access to this table can't easily steal sessions by just setting their cookies to values from the table.
Users with access to the database can //probably// do plenty of other bad stuff (e.g., T13134 mentions digesting Conduit tokens) but there's very little cost to storing digests instead of live tokens.
We currently digest session keys with HMAC-SHA1. This is fine, but HMAC-SHA256 is better. Upgrade:
- Always write new digests.
- We still match sessions with either digest.
- When we read a session with an old digest, upgrade it to a new digest.
In a few months we can throw away the old code. When we do, installs that skip upgrades for a long time may suffer a one-time logout, but I'll note this in the changelog.
We could avoid this by storing `hmac256(hmac1(key))` instead and re-hashing in a migration, but I think the cost of a one-time logout for some tiny subset of users is very low, and worth keeping things simpler in the long run.
Test Plan:
- Hit a page with an old session, got a session upgrade.
- Reviewed sessions in Settings.
- Reviewed user logs.
- Logged out.
- Logged in.
- Terminated other sessions individually.
- Terminated all other sessions.
- Spot checked session table for general sanity.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13225, T13222
Differential Revision: https://secure.phabricator.com/D19883
Summary: See https://discourse.phabricator-community.org/t/personal-timezone-setting-mismatch-cleared-and-more-specific-cases/1680. The code has always worked correctly, but the resulting timezone mismatch warning messsage wasn't specific enough when the mismatch is by a non-integer number of hours.
Test Plan: Set timezone locally to Asia/Vladivostok and in Phabricator to Australia/Adelaide (which as of today's date are 30 minutes apart) and observed a more precise error message: F6061330
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D19873
Summary:
Depends on D19861. Ref T13222. See PHI996. Fixes T10743. Currently, notifications only work if a story also has a feed rendering.
Separate "visible in feed" and "visible in notifications", and make notifications query only notifications and vice versa.
Then, set the test notification stories to be visible in notifications only, not feed.
This could be refined a bit (there's no way to have the two views render different values today, for example) but since the only actual use case we have right now is test notifications I don't want to go //too// crazy future-proofing it. I could imagine doing some more of this kind of stuff in Conpherence eventually, though, perhaps.
Test Plan: Sent myself test notifications, saw them appear on my profile timeline and in the JS popup, and in my notifications menu, but not in feed.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222, T10743
Differential Revision: https://secure.phabricator.com/D19864
Summary:
Ref T13090. The default width changed recently to become much wider, but the behavior on this control isn't great. Instead:
- Pick a default width somewhere between the two.
- Make the width sticky across show/hide (pressing "f" twice remembers your width instead of resetting it).
- Make the width sticky across reloads (dragging the bar, then reloading the page keeps the bar in the same place).
Test Plan:
- Without settings, loaded page: got medium-width bar.
- Dragged bar wide/narrow, toggled on/off with "f", got persistent width.
- Dragged bar wide/narrow, reloaded page, got persistent width.
- Dragged bar wide/narrow, toggled it off, reloaded page, toggled it on, got persistent width.
Maniphest Tasks: T13090
Differential Revision: https://secure.phabricator.com/D19129
Summary:
See PHI370. Support the "Affected packages" and "Affected package owners" Herald fields in pre-commit hooks.
I believe there's no technical reason these fields aren't supported and this was just overlooked.
Test Plan: Wrote a rule which makes use of the new fields, pushed commits through it. Checked transcripts and saw sensible-looking values.
Differential Revision: https://secure.phabricator.com/D19104
Summary:
Ref T13053. Because I previously misunderstood what "multiplex" means, I used it in various contradictory and inconsistent ways.
We can send mail in two ways: either one mail to everyone with a big "To" and a big "Cc" (not default; better for mailing lists) or one mail to each recipient with just them in "To" (default; better for almost everything else).
"Multiplexing" is combining multiple signals over a single channel, so it more accurately describes the big to/cc. However, it is sometimes used to descibe the other approach. Since it's ambiguous and I've tainted it through misuse, get rid of it and use more clear language.
(There's still some likely misuse in the SMS stuff, and a couple of legitimate uses in other contexts.)
Test Plan: Grepped for `multiplex`, saw less of it.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D18994
Summary:
Ref T10448. Currently, we use "mail tags" (in {nav Settings > Email Preferences}) to give users some ability to route mail. There are a number of major issues with this:
- It isn't modular and can't be extended by third-party applications.
- The UI is a giant mess of 5,000 individual settings.
- Settings don't map clearly to actual edits.
- A lot of stuff isn't covered by any setting.
This adds a new system, called "mail stamps", which is similar to "mail tags" but tries to fix all these problems.
I called these "stamps" because: stamps make sense with mail; we can't throw away the old system just yet and need to keep it around for a bit; we don't use this term for anything else; it avoids confusion with project tags.
(Conceptually, imagine these as ink stamps like "RETURN TO SENDER" or "FRAGILE", not actual postage stamps.)
The only real "trick" here is that later versions of this will need to enumerate possible stamps for an object and maybe all possible stamps for all objects in the system. This is why stamp generation is separated into a "template" phase and a "value" phase. In future changes, the "template" phase can be used on its own to generate documentation and typeaheads and let users build rules. This may need some more refinement before it really works since I haven't built any of that yet.
Also adds a preference for getting stamps in the header only (default) or header and body (better for Gmail, which can't route based on headers).
Test Plan:
Fiddled with preference, sent some mail and saw a "STAMPS" setting in the body and an "X-Phabricator-Stamps" header.
{F5411694}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10448
Differential Revision: https://secure.phabricator.com/D18991
Summary:
Depends on D18971. Ref T13049. The rule is currently "you can see IP addresses for actions which affect your account".
There's some legitimate motivation for this, since it's good if you can see that someone you don't recognize has been trying to log into your account.
However, this includes cases where an administrator disables/enables your account, or promotes/demotes you to administrator. In these cases, //their// IP is shown!
Make the rule:
- Administrators can see it (consistent with everything else).
- You can see your own actions.
- You can see actions which affected you that have no actor (these are things like login attempts).
- You can't see other stuff: usually, administrators changing your account settings.
Test Plan: Viewed activity log as a non-admin, no longer saw administrator's IP address disclosed in "Demote from Admin" log.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18972
Summary: Depends on D18965. Ref T13049. Move this Query and SearchEngine to be a little more modern, to prepare for Export support.
Test Plan:
- Used all the query fields, viewed activity logs via People and Settings.
- I'm not sure the "Session" query is used/useful and may remove it before I'm done here, but I just left it in place for now.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18966
Summary:
Depends on D18904. Ref T13043. If an attacker compromises a victim's session and bypasses their MFA, they can try to guess the user's current account password by making repeated requests to change it: if they guess the right "Old Password", they get a different error than if they don't.
I don't think this is really a very serious concern (the attacker already got a session and MFA, if configured, somehow; many installs don't use passwords anyway) but we get occasional reports about it from HackerOne. Technically, it's better policy to rate limit it, and this should reduce the reports we receive.
Test Plan: Tried to change password over and over again, eventually got rated limited. Used `bin/auth unlimit` to clear the limit, changed password normally without issues.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18906
Summary:
Ref T13043. This moves user account passwords to the new shared infrastructure.
There's a lot of code changes here, but essentially all of it is the same as the VCS password logic in D18898.
Test Plan:
- Ran migration.
- Spot checked table for general sanity.
- Logged in with an existing password.
- Hit all error conditions on "change password", "set password", "register new account" flows.
- Verified that changing password logs out other sessions.
- Verified that revoked passwords of a different type can't be selected.
- Changed passwords a bunch.
- Verified that salt regenerates properly after password change.
- Tried to login with the wrong password, which didn't work.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18903
Summary:
See PHI223. Ref T13024. There's a remaining registration/login order issue after the other changes in T13024: we lose track of the current URI when we go through the MFA flow, so we can lose "Set Password" at the end of the flow.
Specifically, the flow goes like this today:
- User clicks the welcome link in email.
- They get redirected to the "set password" settings panel.
- This gets pre-empted by Legalpad (although we'll potentially survive this with the URI intact).
- This also gets pre-empted by the "Set MFA" workflow. If the user completes this flow, they get redirected to a `/auth/multifactor/?id=123` sort of URI to highlight the factor they added. This causes us to lose the `/settings/panel/password/blah/blah?key=xyz` URI.
The ordering on this is also not ideal; it's preferable to start with a password, then do the other steps, so the user can return to the flow more easily if they are interrupted.
Resolve this by separating the "change your password" and "set/reset your password" flows onto two different pages. This copy/pastes a bit of code, but both flows end up simpler so it feels reasonable to me overall.
We don't require a full session for "set/reset password" (so you can do it if you don't have MFA/legalpad yet) and do it first.
This works better and is broadly simpler for users.
Test Plan:
- Required MFA + legalpad, invited a user via email, registered.
- Before: password set flow got lost when setting MFA.
- After: prompted to set password, then sign documents, then set up MFA.
- Reset password (with MFA confgiured, was required to MFA first).
- Tried to reset password without a valid reset key, wasn't successful.
- Changed password using existing flow.
- Hit various (all?) error cases (short password, common password, mismatch, missing password, etc).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024
Differential Revision: https://secure.phabricator.com/D18840
Summary: Noticed a couple of typos in the docs, and then things got out of hand.
Test Plan:
- Stared at the words until my eyes watered and the letters began to swim on the screen.
- Consulted a dictionary.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18693
