Summary:
Ref T3472. Currently, if an install only allows "@mycompany.com" emails and you try to register with an "@personal.com" account, we let you pick an "@mycompany.com" address instead. This is secure: you still have to verify the email. However, it defies user expectation -- it's somewhat confusing that we let you register. Instead, provide a hard roadblock.
(These accounts can still be linked, just not used for registration.)
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3472
Differential Revision: https://secure.phabricator.com/D7571
Summary: See private chatter. Make it explicitly clear when adding a provider that anyone who can browse to Phabricator can register.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7570
Summary: Adds an ObjectBox to Phabricator Registration
Test Plan: check logged out page for new header.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7223
Summary: I'd like to reuse this for other content areas, renaming for now. This might be weird to keep setForm, but I can fix that later if we need.
Test Plan: reload a few forms in maniphest, projects, differential
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7120
Summary: See task
Test Plan:
Attempt to signup with recaptcha disabled.
Attempt to signup with recaptcha enabled with incorrect value.
Attempt to signup with recaptcha enabled with correct value.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Maniphest Tasks: T3832
Differential Revision: https://secure.phabricator.com/D7053
Summary: Adds plain support for object lists that just look like lists
Test Plan: review UIexamples and a number of other applications
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D6922
Summary: Depends on D6872. Ref T3687. Give the user a nice dialog instead of a bare exception.
Test Plan: Cancelled out of Twitter and JIRA workflows. We should probably do this for the OAuth2 workflows too, but they're a bit of a pain to de-auth and I am lazy.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3687
Differential Revision: https://secure.phabricator.com/D6873
Summary:
Ref T3687. Depends on D6867. This allows login/registration through JIRA.
The notable difference between this and other providers is that we need to do configuration in two stages, since we need to generate and save a public/private keypair before we can give the user configuration instructions, which takes several seconds and can't change once we've told them to do it.
To this effect, the edit form renders two separate stages, a "setup" stage and a "configure" stage. In the setup stage the user identifies the install and provides the URL. They hit save, we generate a keypair, and take them to the configure stage. In the configure stage, they're walked through setting up all the keys. This ends up feeling a touch rough, but overall pretty reasonable, and we haven't lost much generality.
Test Plan: {F57059}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3687
Differential Revision: https://secure.phabricator.com/D6868
Summary:
This attempts some consistency in form layouts. Notably, they all now contain headers and are 16px off the sides and tops of pages. Also updated dialogs to the same look and feel. I think I got 98% of forms with this pass, but it's likely I missed some buried somewhere.
TODO: will take another pass as consolidating these colors and new gradients in another diff.
Test Plan: Played in my sandbox all week. Please play with it too and let me know how they feel.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D6806
Summary:
^\s+(['"])dust\1\s*=>\s*true,?\s*$\n
Test Plan: Looked through the diff.
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D6769
Summary:
Ref T3373. The submit listener doesn't properly scope the form it listens to right now, so several forms on the page mean that comments post to one of them more or less at random.
Scope it properly by telling it which object PHID it is associated with.
Test Plan: Made Question comments, saw comments Ajax in on the question itself rather than on an arbitrary answer.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3373
Differential Revision: https://secure.phabricator.com/D6611
Summary: Fixes T3517. Moves the email verification page out of People and into Auth. Makes it look less awful.
Test Plan: {F49636} {F49637}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3517
Differential Revision: https://secure.phabricator.com/D6425
Summary:
Ref T1536. This is equivalent to logging out and logging back in again, but a bit less disruptive for users. For some providers (like Google), this may eventually do something different (Google has a "force" parameter which forces re-auth and is ostensibly required to refresh long-lived tokens).
Broadly, this process fixes OAuth accounts with busted access tokens so we can do API stuff. For other accounts, it mostly just syncs profile pictures.
Test Plan:
Refreshed LDAP and Oauth accounts, linked OAuth accounts, hit error conditions.
{F47390}
{F47391}
{F47392}
{F47393}
{F47394}
{F47395}
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6290
Summary: Ref T1536. Like Google, GitHub is actually strict about callback URIs too. Keep them pointed at the old URIs until we can gradually migrate.
Test Plan: Logged in with GitHub.
Reviewers: garoevans, davidreuss, btrahan
Reviewed By: garoevans
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6265
Summary: Changes it to a dialog view, tweaks some layout bugs on full width forms.
Test Plan: Tested loging in and resetting my password. Chrome + Mobile
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, nrp
Differential Revision: https://secure.phabricator.com/D6257
Summary:
Ref T1536.
- When users try to add a one-of provider which already exists, give them a better error (a dialog explaining what's up with reasonable choices).
- Disable such providers and label why they're disabled on the "new provider" screen.
Test Plan:
{F47012}
{F47013}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6256
Summary: Ref T1536. Mostly, this puts "username/password" (which is probably a common selection) first on the list.
Test Plan: {F47010}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6254
Summary: Ref T1536. This "should never happen", but can if you're developing custom providers. Improve the robustness of this interface in the presence of missing provider implementations.
Test Plan: {F47008}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6253
Summary:
Ref T1536.
- Move all the provider-specific help into contextual help in Auth.
- This provides help much more contextually, and we can just tell the user the right values to use to configure things.
- Rewrite account/registration help to reflect the newer state of the word.
- Also clean up a few other loose ends.
Test Plan: {F46937}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6247
Summary:
Ref T1536. This sets us for the "Config -> Database" migration. Basically:
- If stuff is defined in the database, respect the database stuff (no installs have anything defined yet since they can't reach the interfaces/code).
- Otherwise, respect the config stuff (all installs currently do this).
Test Plan: Saw database stuff respected when database stuff was defined; saw config stuff respected otherwise.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6240
Summary:
Ref T1536. Currently, when you install Phabricator you're dumped on the login screen and have to consult the documentation to learn about `bin/accountadmin`.
Instead, detect that an install is running first-time setup:
- It has no configured providers; and
- it has no user accounts.
We can safely deduce that such an install isn't configured yet, and let the user create an admin account from the web UI.
After they login, we raise a setup issue and lead them to configure authentication.
(This could probably use some UI and copy tweaks.)
Test Plan:
{F46738}
{F46739}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6228
Summary: Ref T1536. Make this UI a bit more human-friendly.
Test Plan: {F46873}
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6237
Summary:
Ref T1536. This is extremely reachable and changes the login code to the new stuff.
Notes:
- I've hard-disabled password registration since I want installs to explicitly flip it on via config if they want it. New installs will get it by default in the future, but old installs shouldn't have their auth options change.
- Google doesn't let us change the redirect URI, so keep the old one working.
- We need to keep a bit of LDAP around for now for LDAP import.
- **Facebook:** This causes substantive changes in what login code is executed.
Test Plan:
- Logged in / logged out / registered, hit new flows.
- Logged in with google.
- Verified no password registration by default.
Reviewers: btrahan, chad
Reviewed By: chad
CC: wez, nh, aran, mbishopim3
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6222
Summary:
Ref T1536. None of this code is reachable.
For the new web UI for auth edits, give providers more and better customization options for handling the form. Allow them to format transactions.
Also fix the "Auth" application icon.
Test Plan: {F46718}
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6221
Summary:
Ref T1536.
- When linking accounts after initially failing, make the crumb say "Link Account" instead of "Login".
- When on the LDAP failure form, show a "Cancel" button returning to start (if logging in) or settings (if linking accounts).
- Allow providers to distinguish between "start", "login" and "link" rendering.
Test Plan: Linked and logged in with LDAP and other registration mechainsms.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6214
Summary:
Ref T1536.
- Add a "Cancel" button, to get back to login.
- Add a crumb showing the registering provider.
- Add an account card when registering with an external account
- Tailor some language to make it less ambiguous ("Phabricator Username", "Register Phabricator Account").
Test Plan:
{F46618}
{F46619}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6213
Summary: Ref T1536. This gets the single queries out of the View and builds a propery Query class for ExternalAccount.
Test Plan: Linked/unlinked accounts, logged out, logged in.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6212
Summary: Ref T1536. This script basically exists to restore access if/when users shoot themselves in the foot by disabling all auth providers and can no longer log in.
Test Plan: {F46411}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6205
Summary: Ref T1536. When auth providers are edited, show the edit history.
Test Plan: {F46400}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, chad
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6203
Summary: Ref T1536. Many rough / broken edges, but adds the rough skeleton of the provider edit workflow.
Test Plan: {F46333}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, chad
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6200
Summary: Ref T1536. Adds an initial "choose a provider type" screen for adding a new provider. This doesn't go anywhere yet.
Test Plan: {F46316}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, chad
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6199
Summary: Ref T1536. These can probably use some design tweaking and there's a bit of a bug with profile images for some providers, but generally seems to be in the right ballpark.
Test Plan:
{F46604}
{F46605}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6210
Summary:
Ref T1536. Currently, we have separate panels for each link/unlink and separate controllers for OAuth vs LDAP.
Instead, provide a single "External Accounts" panel which shows all linked accounts and allows you to link/unlink more easily.
Move link/unlink over to a full externalaccount-based workflow.
Test Plan:
- Linked and unlinked OAuth accounts.
- Linked and unlinked LDAP accounts.
- Registered new accounts.
- Exercised most/all of the error cases.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran, mbishopim3
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6189
Summary:
Ref T1536. Facebook currently does a check which should be on-login in registration hooks, and this is generally a reasonable hook to provide.
The "will login" event allows listeners to reject or modify a login, or just log it or whatever.
NOTE: This doesn't cover non-web logins right now -- notably Conduit. That's presumably fine.
(This can't land for a while, it depends on about 10 uncommitted revisions.)
Test Plan: Logged out and in again.
Reviewers: wez, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6202
Summary: Ref T1536. Like D6080, we don't need to store the registration key itself. This prevents a theoretical attacker who can read the database but not write to it from hijacking registrations.
Test Plan: Registered a new account.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6188
Summary:
Ref T1445. Ref T1536. Although we have separate CSRF protection and have never been vulnerable to OAuth hijacking, properly implementing the "state" parameter provides a little more certainty.
Before OAuth, we set a random value on the client, and pass its hash as the "state" parameter. Upon return, validate that (a) the user has a nonempty "phcid" cookie and (b) the OAuth endpoint passed back the correct state (the hash of that cookie).
Test Plan: Logged in with all OAuth providers, which all apparently support `state`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, arice
Maniphest Tasks: T1445, T1536
Differential Revision: https://secure.phabricator.com/D6179
Summary: Ref T1536. We can safely replace the old login validation controller with this new one, and reduce code dplication while we're at it.
Test Plan: Logged in with LDAP, logged in with OAuth, logged in with username/password, did a password reset.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6178
Summary:
Ref T1536. Ref T1930. Code is not reachable.
This provides password authentication and registration on the new provider/adapter framework.
I sort of cheated a little bit and don't really route any password logic through the adapter (instead, this provider uses an empty adapter and just sets the type/domain on it). I think the right way to do this //conceptually// is to treat username/passwords as an external black box which the adapter communicates with. However, this creates a lot of practical implementation and UX problems:
- There would basically be two steps -- in the first one, you interact with the "password black box", which behaves like an OAuth provider. This produces some ExternalAccount associated with the username/password pair, then we go into normal registration.
- In normal registration, we'd proceed normally.
This means:
- The registration flow would be split into two parts, one where you select a username/password (interacting with the black box) and one where you actually register (interacting with the generic flow). This is unusual and probably confusing for users.
- We would need to do a lot of re-hashing of passwords, since passwords currently depend on the username and user PHID, which won't exist yet during registration or the "black box" phase. This is a big mess I don't want to deal with.
- We hit a weird condition where two users complete step 1 with the same username but don't complete step 2 yet. The box knows about two different copies of the username, with two different passwords. When we arrive at step 2 the second time we have a lot of bad choices about how to reoslve it, most of which create security problems. The most stragihtforward and "pure" way to resolve the issues is to put password-auth usernames in a separate space, but this would be incredibly confusuing to users (your login name might not be the same as your username, which is bizarre).
- If we change this, we need to update all the other password-related code, which I don't want to bother with (at least for now).
Instead, let registration know about a "default" registration controller (which is always password, if enabled), and let it require a password. This gives us a much simpler (albeit slightly less pure) implementation:
- All the fields are on one form.
- Password adapter is just a shell.
- Password provider does the heavy lifting.
We might make this more pure at some point, but I'm generally pretty satisfied with this.
This doesn't implement the brute-force CAPTCHA protection, that will be coming soon.
Test Plan: Registered with password only and logged in with a password. Hit various error conditions.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, chad
Maniphest Tasks: T1536, T1930
Differential Revision: https://secure.phabricator.com/D6164
Summary:
Ref T1536. None of this code is reachable.
Implements new-auth login (so you can actually login) and login validation (which checks that cookies were set correctly).
Test Plan: Manually enabled FB auth, went through the auth flow to login/logout. Manually hit most of the validation errors.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6162
Summary:
Ref T1536. Code is intentionally made unreachable (see PhabricatorAuthProviderOAuthFacebook->isEnabled()).
This adds:
- A provider-driven "start" screen (this has the list of ways you can login/register).
- Registration actually works.
- Facebook OAuth works.
@chad, do you have any design ideas on the start screen? I think we poked at it before, but the big issue was that there were a limitless number of providers. Today, we have:
- Password
- LDAP
- Facebook
- GitHub
- Phabricator
- Disqus
- Google
We plan to add:
- Asana
- An arbitrary number of additional instances of Phabricator
Users want to add:
- OpenID
- Custom providers
And I'd like to have these at some point:
- Stripe
- WePay
- Amazon
- Bitbucket
So basically any UI for this has to accommodate 300 zillion auth options. I don't think we need to solve any UX problems here (realistically, installs enable 1-2 auth options and users don't actually face an overwhelming number of choices) but making the login forms less ugly would be nice. No combination of prebuilt elements seems to look very good for this use case.
Test Plan: Registered a new acount with Facebook.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6161
Summary:
Ref T1536. None of this code is reachable.
`PhabricatorAuthLoginController` provides a completely generic login/link flow, similar to how D6155 provides a generic registration flow.
`PhabricatorAuthProvider` wraps a `PhutilAuthAdapter` and glues the generic top-level flow to a concrete authentication provider.
Test Plan: Static only, code isn't meaningfully reachable.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6159
Summary:
Currently, registration and authentication are pretty messy. Two concrete problems:
- The `PhabricatorLDAPRegistrationController` and `PhabricatorOAuthDefaultRegistrationController` controllers are giant copy/pastes of one another. This is really bad.
- We can't practically implement OpenID because we can't reissue the authentication request.
Additionally, the OAuth registration controller can be replaced wholesale by config, which is a huge API surface area and a giant mess.
Broadly, the problem right now is that registration does too much: we hand it some set of indirect credentials (like OAuth tokens) and expect it to take those the entire way to a registered user. Instead, break registration into smaller steps:
- User authenticates with remote service.
- Phabricator pulls information (remote account ID, username, email, real name, profile picture, etc) from the remote service and saves it as `PhabricatorUserCredentials`.
- Phabricator hands the `PhabricatorUserCredentials` to the registration form, which is agnostic about where they originate from: it can process LDAP credentials, OAuth credentials, plain old email credentials, HTTP basic auth credentials, etc.
This doesn't do anything yet -- there is no way to create credentials objects (and no storage patch), but I wanted to get any initial feedback, especially about the event call for T2394. In particular, I think the implementation would look something like this:
$profile = $event->getValue('profile')
$username = $profile->getDefaultUsername();
$is_employee = is_this_a_facebook_employee($username);
if (!$is_employee) {
throw new Exception("You are not employed at Facebook.");
}
$fbid = get_fbid_for_facebook_username($username);
$profile->setDefaultEmail($fbid);
$profile->setCanEditUsername(false);
$profile->setCanEditEmail(false);
$profile->setCanEditRealName(false);
$profile->setShouldVerifyEmail(true);
Seem reasonable?
Test Plan: N/A yet, probably fatals.
Reviewers: vrana, btrahan, codeblock, chad
Reviewed By: btrahan
CC: aran, asherkin, nh, wez
Maniphest Tasks: T1536, T2394
Differential Revision: https://secure.phabricator.com/D4647
Summary: Ref T1536. This is similar to D6172 but much simpler: we don't need to retain external interfaces here and can do a straight migration.
Test Plan: TBA
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6173
Summary: Ref T1536. Migrates the OAuthInfo table to ExternalAccount, and makes `PhabricatorUserOAuthInfo` a wrapper for an ExternalAccount.
Test Plan: Logged in with OAuth, registered with OAuth, linked/unlinked OAuth accounts, checked OAuth status screen, deleted an account with related OAuth.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6172
Summary:
Ref T1536. Move all access to the underlying storage to inside the class. My plan is:
- Migrate the table to ExternalAccount.
- Nuke the table.
- Make this class read from and write to ExternalAccount instead.
We can't get rid of OAuthInfo completely because Facebook still depends on it for now, via registration hooks.
Test Plan: Logged in and registered with OAuth.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6171
Summary:
Ref T1536. Currently, we store OAuth tokens along with their expiry times and status. However, all we use this for is refreshing profile pictures and showing a silly (and probably somewhat confusing) interface about token status.
I want to move this storage over to `PhabricatorExternalAccount` to make the cutover easier. Drop it for now, including all the profile image stuff (I plan to rebuild that in a more sensible way anyway).
Test Plan: Viewed screen; linked/unlinked accounts.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6170
Summary: okay title. other apps can get this by implementing shouldAllowPublic and set(ting)RequestURI on TransactionsCommentView. note i put some css inline -- let me know if that belongs someplace else or needs better design.
Test Plan: viewed a mock logged out and saw new button. used new button and ended up on the mock logged in with a clean URI.
Reviewers: epriestley, chad
Reviewed By: chad
CC: aran, Korvin
Maniphest Tasks: T2653
Differential Revision: https://secure.phabricator.com/D5266
Summary: Sgrepped for `"=~/</"` and manually changed every HTML.
Test Plan: This doesn't work yet but it is hopefully one of the last diffs before Phabricator will be undoubtedly HTML safe.
Reviewers: epriestley
CC: aran, Korvin
Maniphest Tasks: T2432
Differential Revision: https://secure.phabricator.com/D4927
Summary: I'm too lazy to attaching them for diffs where they were introduced.
Test Plan:
/
/D1, wrote comment with code snippet
DarkConsole
commit detail, wrote comment
task detail, wrote comment
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2432
Differential Revision: https://secure.phabricator.com/D4911
Summary:
This is pretty brutal and it adds some `phutil_safe_html()`.
But it is a big step in the right direction.
Test Plan: None.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2432
Differential Revision: https://secure.phabricator.com/D4905
Summary:
This resolves lots of double escaping.
We changed most of `phutil_render_tag(, , $s)` to `phutil_tag(, , $s)` which means that `$s` is now auto-escaped.
Also `pht()` auto escapes if it gets `PhutilSafeHTML`.
Test Plan: None.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2432
Differential Revision: https://secure.phabricator.com/D4889
Summary:
Lots of killed `phutil_escape_html()`.
Done by searching for `AphrontTableView` and then `$rows` (usually) backwards.
Test Plan:
Looked at homepage.
echo id(new AphrontTableView(array(array('<'))))->render();
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4884
Summary:
Done by searching for `AphrontDialogView` and then `appendChild()`.
Also added some `pht()`.
Test Plan: None.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4882
Summary: Searched for `AphrontFormView` and then for `appendChild()`.
Test Plan: /login/
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2432
Differential Revision: https://secure.phabricator.com/D4855
Summary: Done by searching for `AphrontErrorView` and then `appendChild()`.
Test Plan:
Looked at Commit Detail.
Looked at Revision Detail.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2432
Differential Revision: https://secure.phabricator.com/D4843
Summary: Convert most phabricator_render_form callsites. In the case of the "headsup view", it converts it by deleting the element entirely (this is the very old Maniphest/Differential header which we no longer use).
Test Plan: Poked around a bit.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T2432
Differential Revision: https://secure.phabricator.com/D4726
Summary: Spent some time going through auth stuff for pht's.
Test Plan: Tested logging in, logging out, reseting password, using Github, creating a new account. I couldn't quite test everything so will double read the diff when I submit it.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4671
Summary:
Created with spatch:
lang=diff
- phutil_render_tag
+ phutil_tag
(X, Y, '...')
Then searched for `&` and `<` in the output and replaced them.
Test Plan: Loaded homepage.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4503
Summary: Removes the panel-view on login and adds additonal responsive styles for mobile forms.
Test Plan: View in mobile browser, resize page.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4530
Summary:
This commit doesn't change license of any file. It just makes the license implicit (inherited from LICENSE file in the root directory).
We are removing the headers for these reasons:
- It wastes space in editors, less code is visible in editor upon opening a file.
- It brings noise to diff of the first change of any file every year.
- It confuses Git file copy detection when creating small files.
- We don't have an explicit license header in other files (JS, CSS, images, documentation).
- Using license header in every file is not obligatory: http://www.apache.org/dev/apply-license.html#new.
This change is approved by Alma Chao (Lead Open Source and IP Counsel at Facebook).
Test Plan: Verified that the license survived only in LICENSE file and that it didn't modify externals.
Reviewers: epriestley, davidrecordon
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2035
Differential Revision: https://secure.phabricator.com/D3886
Summary:
- Introduce `shouldAllowPublic()`, indicating that logged-out users are OK in a controller if the install is configured to permit public policies.
- Make Paste views and lists allow public users.
- Make UI do sensible things with respect to disabling links, etc.
- Improve behavior of "you need to login" with respect to policy exceptions and Ajax requests.
Test Plan: Looked at "public" paste, saw all unavailable UI disabled, clicked it, got appropraite prompts.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3502
Summary:
When logging in as an LDAP user for the first time (thus registering), a DAO exception was being thrown because PhabricatorLDAPRegistrationController wasn't passing in a username to PhabricatorUser::setUsername().
Somewhat separately, since either the PHP LDAP extension's underlying library or Active Directory are returning attributes with lowercased key names, I have to search on sAMAccountName and look for the key samaccountname in the results; this is fine since the config allows these to be defined separately. However I found that PhabricatorLDAPProvider::retrieveUserName() was attempting to use the search attribute rather than the username attribute. This resolves.
Test Plan: Tested registration and login against our internal AD infrastructure; worked perfectly. Need help from someone with access to a functional non-AD LDAP implementation; I've added the original author and CCs from D2722 in case they can help test in this regard.
Reviewers: epriestley, voldern
Reviewed By: voldern
CC: voldern, aran, Korvin, auduny, svemir
Differential Revision: https://secure.phabricator.com/D3340
Summary:
Currently, we have a hard-coded list of settings panels. Make them a bit more modular.
- Allow new settings panels to be defined by third-party code (see {D2340}, for example -- @ptarjan).
- This makes the OAuth stuff more flexible for {T887} / {T1536}.
- Reduce the number of hard-coded URIs in various places.
Test Plan: Viewed / edited every option in every panel. Grepped for all references to these URIs.
Reviewers: btrahan, vrana, ptarjan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3257
Summary: Currently, the logout link is this awkward form in the footer since we have to CSRF it. Enable a GET + dialog + confirm workflow instead so the logout link can just be a link instead of this weird mess.
Test Plan: Went to /logout/, logged out.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3066
Summary: The Graph API exposes a new field, security_settings, which allows applications to see whether a user has enabled Secure Browsing. This diff adds a configuration setting to Phabricator which forces users to have Secure Browsing enabled when logging in via Facebook.
Test Plan: With the configuration setting off, verify that secure browsing does not affect the ability to log in. With the configuration setting on and secure browsing off, verify that the login attempts is rejected. Then verify that the login attempt succeeds when secure browsing is enabled.
Reviewers: epriestley
Reviewed By: epriestley
CC: arice, aran, Korvin
Maniphest Tasks: T1487
Differential Revision: https://secure.phabricator.com/D2964
Summary:
- LDAP import needs to use envelopes.
- Use ldap_sprintf().
Test Plan: Configured an LDAP server. Added an account. Imported it; logged in with it. Tried to login with accounts like ",", etc., got good errors.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2995
Summary:
See D2991 / T1526. Two major changes here:
- PHP just straight-up logs passwords on ldap_bind() failures. Suppress that with "@" and keep them out of DarkConsole by enabling discard mode.
- Use PhutilOpaqueEnvelope whenever we send a password into a call stack.
Test Plan:
- Created a new account.
- Reset password.
- Changed password.
- Logged in with valid password.
- Tried to login with bad password.
- Changed password via accountadmin.
- Hit various LDAP errors and made sure nothing appears in the logs.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D2993
Summary:
Sometimes people create their account in Phabricator using some OAuth provider, forget about it and then tries to login with another provider.
Provide this information to them.
Test Plan: Tried to link an account linked to already existing user.
Reviewers: epriestley
Reviewed By: epriestley
CC: robarnold, aran, Korvin
Differential Revision: https://secure.phabricator.com/D2857
Summary: It requires `allow_url_fopen` which we don't check in setup and our installation is about to disable it.
Test Plan:
Login with OAuth.
/oauth/facebook/diagnose/
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2787
Summary: Made it possible to link and unlink LDAP accounts with Phabricator accounts.
Test Plan:
I've tested this code locally and in production where I work.
I've tried creating an account from scratch by logging in with LDAP and linking and unlinking an LDAP account with an existing account. I've tried to associate the same LDAP account with different Phabricator accounts and it failed as expected.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, auduny, svemir
Maniphest Tasks: T742
Differential Revision: https://secure.phabricator.com/D2722
Summary: GitHub dropped support for the v2 API today, which breaks login and registration. Use the v3 API instead.
Test Plan: Registered and logged in with GitHub. Verified process pulled email/photo/name/username correctly.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D2726
Summary:
Give them a big essay about how it's dangerous, but allow them to do it formally.
Because the username is part of the password salt, users must change their passwords after a username change.
Make password reset links work for already-logged-in-users since there's no reason not to (if you have a reset link, you can log out and use it) and it's much less confusing if you get this email and are already logged in.
Depends on: D2651
Test Plan: Changed a user's username to all kinds of crazy things. Clicked reset links in email. Tried to make invalid/nonsense name changes.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1303
Differential Revision: https://secure.phabricator.com/D2657
Summary:
See T1303, which presents a reasonable case for inclusion of these characters in valid usernames.
Also, unify username validity handling.
Test Plan: Created a new user with a valid name. Tried to create a new user with an invalid name. Ran unit tests.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1303
Differential Revision: https://secure.phabricator.com/D2651
Summary:
- `kill_init.php` said "Moving 1000 files" - I hope that this is not some limit in `FileFinder`.
- [src/infrastructure/celerity] `git mv utils.php map.php; git mv api/utils.php api.php`
- Comment `phutil_libraries` in `.arcconfig` and run `arc liberate`.
NOTE: `arc diff` timed out so I'm pushing it without review.
Test Plan:
/D1234
Browsed around, especially in `applications/repository/worker/commitchangeparser` and `applications/` in general.
Auditors: epriestley
Maniphest Tasks: T1103
Summary:
Allow allowed email addresses to be restricted to certain domains. This implies email must be verified.
This probably isn't QUITE ready for prime-time without a few other tweaks (better administrative tools, notably) but we're nearly there.
Test Plan:
- With no restrictions:
- Registered with OAuth
- Created an account with accountadmin
- Added an email
- With restrictions:
- Tried to OAuth register with a restricted address, was prompted to provide a valid one.
- Tried to OAuth register with a valid address, worked fine.
- Tried to accountadmin a restricted address, got blocked.
- Tried to accountadmin a valid address, worked fine.
- Tried to add a restricted address, blocked.
- Tried to add a valid address, worked fine.
- Created a user with People with an invalid address, got blocked.
- Created a user with People with a valid address, worked fine.
Reviewers: btrahan, csilvers
Reviewed By: csilvers
CC: aran, joe, csilvers
Maniphest Tasks: T1184
Differential Revision: https://secure.phabricator.com/D2581
Summary:
- We currently have some bugs in account creation due to nontransactional user/email editing.
- We save $user, then try to save $email. This may fail for various reasons, commonly because the email isn't unique.
- This leaves us with a $user with no email.
- Also, logging of edits is somewhat inconsistent across various edit mechanisms.
- Move all editing to a `PhabricatorUserEditor` class.
- Handle some broken-data cases more gracefully.
Test Plan:
- Created and edited a user with `accountadmin`.
- Created a user with `add_user.php`
- Created and edited a user with People editor.
- Created a user with OAuth.
- Edited user information via Settings.
- Tried to create an OAuth user with a duplicate email address, got a proper error.
- Tried to create a user via People with a duplicate email address, got a proper error.
Reviewers: btrahan, vrana, jungejason
Reviewed By: btrahan
CC: tberman, aran
Maniphest Tasks: T1184
Differential Revision: https://secure.phabricator.com/D2569
Summary:
Allow installs to require users to verify email addresses before they can use Phabricator. If a user logs in without a verified email address, they're given instructions to verify their address.
This isn't too useful on its own since we don't actually have arbitrary email registration, but the next step is to allow installs to restrict email to only some domains (e.g., @mycompany.com).
Test Plan:
- Verification
- Set verification requirement to `true`.
- Tried to use Phabricator with an unverified account, was told to verify.
- Tried to use Conduit, was given a verification error.
- Verified account, used Phabricator.
- Unverified account, reset password, verified implicit verification, used Phabricator.
- People Admin Interface
- Viewed as admin. Clicked "Administrate User".
- Viewed as non-admin
- Sanity Checks
- Used Conduit normally from web/CLI with a verified account.
- Logged in/out.
- Sent password reset email.
- Created a new user.
- Logged in with an unverified user but with the configuration set to off.
Reviewers: btrahan, vrana, jungejason
Reviewed By: btrahan
CC: aran, csilvers
Maniphest Tasks: T1184
Differential Revision: https://secure.phabricator.com/D2520
Summary:
also fix some bugs where we weren't properly capturing the expiry value or scope of access tokens.
This code isn't the cleanest as some providers don't confirm what scope you've been granted. In that case, assume the access token is of the minimum scope Phabricator requires. This seems more useful to me as only Phabricator at the moment really easily / consistently lets the user increase / decrease the granted scope so its basically always the correct assumption at the time we make it.
Test Plan: linked and unlinked Phabricator, Github, Disqus and Facebook accounts from Phabricator instaneces
Reviewers: epriestley
Reviewed By: epriestley
CC: zeeg, aran, Koolvin
Maniphest Tasks: T1110
Differential Revision: https://secure.phabricator.com/D2431
