Summary:
If you run this code:
json_encode(array('tag' => phutil_tag('div', array())));
...you get this result, because json_encode() does not call toString() on objects:
{"tag":{}}
Instead, convert such objects to their underlying strings. Javelin has support for JX.HTML and for implicit conversion (which is kind of sketchy for other reasons) but it's sort of complicated (only happens on Ajax, not behaviors) and messy (not metadata-based), so ignore it for now.
We'll need to do something similar for serialization to the database. My plan there is just to throw on any objects. The only time we put HTML in the database is cache-related and those tiny number of callsites can manually handle it.
Test Plan: Various ajax things now receive the correct data.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T2432
Differential Revision: https://secure.phabricator.com/D4684
Summary:
- Implements `javelin_tag()`, which is `javelin_render_tag()` on top of `phutil_tag()` instead of `phutil_render_tag()`.
- Manually converts all or almost all of the trivial callsites.
Test Plan:
- Site does not seem any more broken than before.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4639
Summary:
Created with spatch:
lang=diff
- phutil_render_tag
+ phutil_tag
(X, Y, '...')
Then searched for `&` and `<` in the output and replaced them.
Test Plan: Loaded homepage.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4503
Summary:
Fixes T2293.
We currently hard-require this in setup. We do not need to; we don't actually need it until we start running daemons. Move it to post-install and provide more guidance.
We could make this even easier in the future, but we'd need to special case it, since it's dangerous to let it be set to any value (if you set it to the wrong value, you can't log in). We could safely have a workflow which writes the current request URI into the database configuration, or a two-stage workflow where we set the URI and then verify it, but these both imply some special casing and complication. This should be a step forward from where we are today, regardless.
Test Plan:
Removed "phabricator.base-uri" from my configuration. Verified Phabricator still works.
Without "phabricator.base-uri" configured, logged in from multiple host names (127.0.0.1:8080, local.aphront.com:8080).
Configured "phabricator.base-uri". Verified my unblessed session no longer worked. Verified setup issue went away.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2293
Differential Revision: https://secure.phabricator.com/D4580
Summary: Just removed the link and created a new field under preferences. Now the setting is under Display Preferences.
Test Plan: Enablied/Disabled dark console to see if it works.
Reviewers: epriestley
Reviewed By: epriestley
CC: irinav, aran, Korvin
Maniphest Tasks: T2344
Differential Revision: https://secure.phabricator.com/D4549
Conflicts:
src/view/page/PhabricatorStandardPageView.php
Summary: Fixed T2349
Test Plan:
Could not visibly see version at footer any more. Appeared in the top of /config.
Does not appear as a config option in /config.
Reviewers: epriestley
CC: aran, Korvin
Maniphest Tasks: T2349
Differential Revision: https://secure.phabricator.com/D4539
Summary:
Currently, we have a "config" panel in DarkConsole. It's useful to have a table of all effective config values, but it doesn't need to be in DarkConsole. Move it to Config instead. Basically:
- You don't need to activate DarkConsole to see it anymore;
- now visible only to admins;
- respects config mask/hide;
- somewhat prettier;
- links to config edit;
- no longer ships down on every DarkConsole request with a giant table of rarely-used data.
Test Plan: Looked at the table. Looked at lack of table in darkconsole.
Reviewers: codeblock, btrahan
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4473
Summary:
Fixes the two-level nav issue introduced by D4376.
(My claim that this page is device ready in the code is something of a lie, but it's fairly close.)
(@chad, this could use an icon at some point, or you can point me at which one you want and I can take a stab at slicing it.)
Test Plan: Looked at feed; saw it not-broken. Also checked public feed (which should just merge at some point).
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D4381
Summary:
In the past, we did some additional magic on `$response_string` (adding profiling headers? Or DarkConsole?), so we could not share the pathway with HTTPSink. We no longer do this; share the pathways.
Also remove error handler initialization (duplicated in PhabricatorEnv), and move $sink initialization earlier. My general goal here is to allow PhabricatorSetup to emit a normal Response object and share as much code as possible with normal pages.
Test Plan: Loaded page.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2228
Differential Revision: https://secure.phabricator.com/D4285
Summary:
We have a lot of mess to get through before we can load libphutil and enter Phabricator code properly. Move it to a dedicated class.
I'm probably going to merge PhabricatorRequestOverseer into this, although the check that lives there now is kind of weird. It also does not really need to be a pre-load check and could be handled better.
I stopped shoving stuff in here once I got to ENV stuff, I'm going to tackle that next.
Test Plan: Ran phabricator normally; introduced fatals and misconfigurations. Grepped for changed symbols.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, asherkin
Maniphest Tasks: T2223
Differential Revision: https://secure.phabricator.com/D4282
Summary:
When previewing, save drafts. When loading objects, restore drafts if they are available.
Depends on: D665
Test Plan:
- Viewed a Mock.
- Typed text into the comment box.
- Reloaded the page.
- Text still there.
- Hit submit, got my comment.
- Reloaded the page.
- Draft correctly deleted.
- Repeated for Macros.
Reviewers: btrahan, chad, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2104
Differential Revision: https://secure.phabricator.com/D4252
Summary:
Implements previews for Macros and Pholio.
(Design is nonfinal -- kind of split the difference between `diff_full_view.png`, laziness, and space concerns. Next couple diffs will add more stuff here.)
Test Plan: {F28055}
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran, vrana
Maniphest Tasks: T2104
Differential Revision: https://secure.phabricator.com/D4246
Summary: Continue work started at D3601.
Test Plan:
Commented declaration `AphrontController::$request`, saw exception.
Brought it back, didn't see exception.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4233
Summary: Currently, AphrontProxyResponse is expected to build a string. This prevents some response types (like Dialog) from being proxied, because they have special rules. Instead, make proxy responses reduce into a non-proxied response so it's possible to proxy any type of response and hit all the normal rules for it.
Test Plan: Built a proxied DialogResponse on top of this.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2104, T912
Differential Revision: https://secure.phabricator.com/D4159
Summary:
For transaction interfaces, I want to prompt the user when they take an action that has no effect, e.g.:
Action Has No Effect
You can not close this task, because someone else has already closed it.
Do you want to post your comment anyway?
[Cancel] [Post Comment]
We already do this for Differential, but it's all hard-coded. T912 is an open task for fixing this for Maniphest.
To do this in a general way, I want to embed the entire request in the dialog as hidden inputs, then add a "__continue__" key and resubmit the form. The endpoint will read this key the second time through and apply what effects it can (e.g., just post a comment).
This adds a mechanism for getting all the request data, minus "magic" like __dialog__ and __csrf__. We need to jump through some hoops because of how PHP encodes arrays.
Test Plan: Ran unit tests, built "no effect" dialogs on top of this.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T912, T2104
Differential Revision: https://secure.phabricator.com/D4158
Summary:
This commit doesn't change license of any file. It just makes the license implicit (inherited from LICENSE file in the root directory).
We are removing the headers for these reasons:
- It wastes space in editors, less code is visible in editor upon opening a file.
- It brings noise to diff of the first change of any file every year.
- It confuses Git file copy detection when creating small files.
- We don't have an explicit license header in other files (JS, CSS, images, documentation).
- Using license header in every file is not obligatory: http://www.apache.org/dev/apply-license.html#new.
This change is approved by Alma Chao (Lead Open Source and IP Counsel at Facebook).
Test Plan: Verified that the license survived only in LICENSE file and that it didn't modify externals.
Reviewers: epriestley, davidrecordon
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2035
Differential Revision: https://secure.phabricator.com/D3886
Summary: Add an Application class for Drydock and move routing rules there.
Test Plan: Looked at /applications/, clicked around drydock.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3847
Summary: you can now add, edit, and delete status events. also added a "description" to status events and surface it in the big calendar view on mouse hover. some refactoring changes as well to make validation logic centralized within the storage class.
Test Plan: added, edited, deleted. yay.
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T407
Differential Revision: https://secure.phabricator.com/D3810
Summary:
Django released a security update recently dealing with malicious "Host" headers:
https://www.djangoproject.com/weblog/2012/oct/17/security/
We're vulnerable to the same attack. Plug the hole.
The risk here is that an attacker does something like this:
# Register "evil.com".
# Point it at secure.phabricator.com in DNS.
# Send a legitimate user a link to "secure.phabricator.com:ignored@evil.com".
# They login and get cookies. Normally Phabricator refuses to set cookies on domains it does not recognize.
# The attacker now points "evil.com" at his own servers and reads the auth cookies on the next request.
Test Plan: Unit tests.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3766
Summary:
Allow skins to serve arbitrary resources without needing to be mapped, so we can have a vibrant community of amateur skinners.
For "basic" skins, just put all the "css/" on the page always.
Includes an image to prove that works.
@vrana, pretty sure this has no impact outside of Phame but it does change Celerity so it might be to blame if there's any weirdness with static resources.
Test Plan:
{F21341}
{F21340}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3719
Summary:
Two high-level things happening here:
- We no longer ever need to put meta-UI (content creation, editing, notices, etc.) on live blog views, since this is all in Phame now. I pulled this out.
- On the other hand, I pushed more routing/control logic into Skins and made the root skin a Controller instead of a View. This simplifies some of the code above skins, and the theory behind this is that it gives us greater flexibility to, e.g., put a glue layer between Phame and Wordpress templates or whatever else, and allows skins to handle routing and thus add pages like "About" or "Bio".
- I added a basic skin below the root skin which is more like the old root skin and has standard rendering hooks.
- "Ten Eleven" is a play on the popular (default?) Wordpress themes called "Twenty Ten", "Twenty Eleven" and "Twenty Twelve".
Test Plan: Viewed live blog and live posts. They aren't pretty, but they don't have extraneous resources.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3714
Summary: I think this is simpler and better than making them conditional. In properly configured installs this should have no impact (they already use a CDN URI). In not-quite-properly configured installs this will add a trivial, highly-compressible number of bytes to the source. In all cases we have less code.
Test Plan: Loaded some pages, everything worked.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3709
Summary:
Cleans up some of the mess I made in D3694. Basically:
- All blogs have an "internal" view with posts that uses mobile-friendly UIs, etc., so we don't have to do as much work with skins -- they just have to look pretty.
- Blogs now have a separate "live" view that we use to handle domains / skins.
- Simplified some views and use IDs in some URLs for consistency.
- Delete a bunch of edge/blogger/multi-blog code that's now obsolete.
Test Plan: Will attach screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3695
Summary:
Adds "can view" and "can edit" policies to blogs. Replaces "bloggers" with "can join".
This doesn't fully remove "bloggers" because I didn't want this to get too crazy/huge.
Test Plan: Created, edited, deleted blogs.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3693
Summary:
introduce an abstract "PhameBlogSkin" class and instantiate two versions -- PhabricatorBlogSkin (Default) and PhacilityBlogSkin.
Most notable hack is including the directory /rsrc/images/phacility - this lets things "work" without messing around with the phacility.com CSS and instead just cutting and pasting most of the file.
Test Plan: played around with Phame a bunch. In particular, created a blog with a custom domain and the phacility skin. Verified it looked good and individual posts looked okay.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3687
Summary: ...and use 'em in the phame blog case.
Test Plan: viewed blog.phabricator.dev and it actually looked right!
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3666
Summary:
D3542 caused a SEV for us.
Make it better for future.
Test Plan: SEV
Reviewers: btrahan, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3614
Summary: When I have displayed DarkConsole and write a comment it keeps scrolling because new AJAX requests pop up.
Test Plan: Displayed it, issued couple of AJAX requests.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1316
Differential Revision: https://secure.phabricator.com/D3605
Summary:
I make this error quite often: I forget to declare a property I am writing to or I make a typo in it.
PHP implicitly creates a public property which I don't like.
I would much rather see a linter warning me against this than this runtime check but writing it is very difficult:
- We need to explore all parents of the class we are checking.
- It is even possible that children will declare that property but it's OK to treat this as error anyway.
- We can extend also builtin or external classes.
- It's somewhat doable for `$this` but even more complex for any `$obj` because we don't know the class of it.
This should catch significant part of these errors and I'm fine with that.
I don't plan escalating to exception because this error is not fatal and should not stop the application from working.
Test Plan: Loaded homepage, checked log.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3601
Summary:
"blog style" for now is just "true" to make this UI render better for the blog
LATER it will be a string which will choose the larger template. this will also have to do some messing around with links; when viewing on a phabricator instance links need to be a bit dirtier to carry around the blog whereas when viewing offsite we can tell what blog it is based on the host domain. anyhoo, this is future diff work
Test Plan: looked at blog - less ugly. resized blog to smaller sizes - became a "single list" of goodness for quality reading quite quickly.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3587
Summary: D3575, D3576, D3577, D3578, D3579, D3580 put all the /apps/ links on /applications/, so we can get rid of /apps/ without loss of functionality.
Test Plan: Clicked "More Stuff" on the homepage, got /applications/ instead of /apps/.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3581
Summary: Basic step toward modernizing Files, makes it appear on /applications/ and in typeahead.
Test Plan: Looked at /applications/.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3575
Summary:
This is mostly to unblock D3547.
- Move "Macros" to a first-class application called "Macros".
- After D3547, this application will also house "Memes" (macros with text on them).
- This will also make them easier to find; the top navigational query I field is "where are image macros?" nowadays, since it's not intuitive they're part of files.
- This makes some of the UI mobile-aware but doesn't set the `device` flag yet, since there are still some missing pieces.
- I'll separate storage out and continue modernizing the UI as we unblock and integrate D3547.
Test Plan: Created, edited and deleted macros. Viewed files.
Reviewers: btrahan, vrana, teisenbe
Reviewed By: vrana
CC: aran
Maniphest Tasks: T175
Differential Revision: https://secure.phabricator.com/D3572
Summary: This currently gives us back "domain.com:port" if there's a port, which messes up the new Phame logic. Make `getHost()` do what one would reasonably expect it to.
Test Plan: Loaded my local, which is on 8080.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3571
Summary:
- Introduce `shouldAllowPublic()`, indicating that logged-out users are OK in a controller if the install is configured to permit public policies.
- Make Paste views and lists allow public users.
- Make UI do sensible things with respect to disabling links, etc.
- Improve behavior of "you need to login" with respect to policy exceptions and Ajax requests.
Test Plan: Looked at "public" paste, saw all unavailable UI disabled, clicked it, got appropraite prompts.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3502
Summary: this then enables people to create blog.theircompany.com. And for us, blog.phacility.com...!
Test Plan:
- created custom URIs of various goodness and verified the error messages were sensical.
- verified if "false" in configuration then custom uri stuff disappears
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3542
Summary:
People have occasionally complained about phabricator being slow. We have
the access log to look at to see when slowness happens, but it doesn't tell
us much about why it happened. Since it's usually a sporadic issue that's
reported, it's hard to reproduce and then profile. This change will allow us
to collect sampled profiles so we can look at them when slowness occurs.
Test Plan:
checking that sampling works correctly:
- set rate to 0; do several page loads; check no new entries in table
- set rate to 1; check that there's a new row in the table for each page load
- set rate to 10; check that some requests write to table and some don't
check new ui for samples:
- load /xhprof/list/all/, see a list with a lot of samples
- load /xhprof/list/sampled/, see only sampled runs
- load /xhprof/list/manual/, see only non-sampled runs
- load /xhprof/list/my-runs/, se only my manual runs
Reviewers: vrana, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3458
Summary:
- Get rid of an AphrontSideNavView callsite.
- Modernize and simplify the application implementation.
- Doesn't work perfectly on tablet/phone but that's because not all the UI examples work there yet.
Test Plan: Looked at /applications/ and /uiexample/.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3431
Summary: Rehash of D3411. In cgi/fcgi setups we have no idea if the request is HTTP or HTTPS as far as I can tell, so make this config-triggered again. Also handle @vrana's "off" case.
Test Plan: Set this flag, observed redirect to https when `$_SERVER['HTTPS']` was absent.
Reviewers: nh, vrana
Reviewed By: nh
CC: aran
Differential Revision: https://secure.phabricator.com/D3420
