Summary:
The locks held by read-only pullLocal daemons were causing our discovery instance
to not get the lock and fail at discovery. We don't need to hold the lock while
pulling (only while discovering), so this moves the lock to the appropriate place.
Test Plan: tested in production
Reviewers: jungejason, epriestley, vrana
Reviewed By: jungejason
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2890
Summary:
Even though `--encoding` is passed to the command, git still fails
in some cases to correctly convert the output. Attempt the conversion
ourselves if it's non UTF-8.
Test Plan: Reparsed message in a repository with ISO-8859-1 encoded commit messages.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T452
Differential Revision: https://secure.phabricator.com/D2888
Summary:
We have a race condition right now, where we may insert a commit without `seenOnBranches`. This means shouldAutocloseCommit will return false (since it's not on any autoclose branches) if the message parser runs fast enough, causing it to associate the commit but not close the revision. This happened for D2851.
Also prompt the user to repair broken repositories.
Test Plan: Ran discovery / repair. Ran discovery on new commits. Verified 'seenOnBranches' value. Deleted some data, verified "repair" error. Repaired repository.
Reviewers: jungejason, nh, vrana, btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2858
Summary: Allow multiple daemons to run without contention.
Test Plan: Ran multiple daemons simultaneously in "debug" mode, observed them acquiring (and sometimes failing to acquire) locks.
Reviewers: btrahan, jungejason, nh
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1400
Differential Revision: https://secure.phabricator.com/D2877
Summary:
When the absolute path is used for load file (loadFileContent(()), it fails in git. For example:
/var/repo/page_admin_app
> git cat-file blob '4d6c03923006d6c444660f2c734fe03e10fd20bd':'/ios/PageAdminApp/Resources/splash/De fault-Portrait@2x~ipad.png'
fatal: Not a valid object name 4d6c03923006d6c444660f2c734fe03e10fd20bd:/ios/PageAdminApp/Resources/s plash/Default-Portrait@2x~ipad.png
This is breaking the auto-closing for about 8 revisions like
https://phabricator.fb.com/rPPA4d6c03923006d6c444660f2c734fe03e10fd20bd ...
https://phabricatorcator.fb.com/rPPA51acb7e482aab0c491b530ed19dddc741d50f673 ...
Test Plan:
- reparsed https://phabricator.fb.com/rPPA4d6c03923006d6c444660f2c734fe03e10fd20bd successfully with corresponding differential revision being closed.
- verified that without leading '/', loadFileContent for svn still works. Both of the following commands worked (note the double '/' right before 'tfb':
svn cat svn+ssh://svn.vip.facebook.com/svnroot//tfb/trunk/www/flib/intern/cachearchiver/regenerators/wurfl/CacheArchiveWurflRegenerator.php@579700
svn cat svn+ssh://svn.vip.facebook.com/svnroot/tfb/trunk/www/flib/intern/cachearchiver/regenerators/wurfl/CacheArchiveWurflRegenerator.php@579700
Reviewers: vrana
Reviewed By: vrana
CC: nh, aran, epriestley
Differential Revision: https://secure.phabricator.com/D2847
Summary:
Improve performance of large discovery tasks in Git by using subprocess streaming, like we do for Mercurial.
Basically, we save the cost of running many `git log` commands by running one big `git log` command but only parsing as much of it as we need to. This is pretty complicated, but we more or less need it for mercurial (which has ~100ms of 'hg' overhead instead of ~5ms of 'git' overhead) so we're already committed to most of the complexity costs. The git implementation is much simpler than the hg implementation because we don't need to handle all the weird parent rules (git gives us to them easily).
Test Plan:
Before, `discover --repair` on Phabricator took 35s:
real 0m35.324s
user 0m13.364s
sys 0m21.088s
Now 7s:
real 0m7.236s
user 0m2.436s
sys 0m3.444s
Note that most of the time is spent inserting rows after discover, the actual speedup of the git discovery part is much larger (subjectively, it runs in less than a second now, from ~28 seconds before).
Also ran discover/pull on single new commits in normal cases to verify that nothing broke in the common case.
Reviewers: jungejason, nh, vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1401
Differential Revision: https://secure.phabricator.com/D2851
Summary:
If a repository is missing commits because they mysteriously vanished, there's no reasonable way to get them back right now. Provide a way to ignore the state in the database and rediscover the entire repository unconditionally.
We don't queue any reparses or anything, but when I move reparse into this script we can hook things up or something. This generally shouldn't be too important anyway.
Test Plan: Ran `repository discover --repair` on Phabricator.
Reviewers: jungejason, nh, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D2850
Summary:
Nothing new or exciting here yet, just moving the random scripts/repositories/ things to bin/repository. Also add `repository list`.
(Console stuff comes from D2841.)
Test Plan: Ran `repository list`, `repository pull`, `repository discover`, `repository discover --verbose`, `repository help`.
Reviewers: jungejason, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D2849
Summary: Add verbose logging. This logging is activated by setting "phd.verbose" in the config, running "phd debug", or explicitly in scripts/repository/pull.php and scripst/repository/discover.php
Test Plan:
>>> orbital ~/devtools/phabricator $ ./scripts/repository/discover.php GTEST
Discovering 'GTEST'...
<VERB> PhabricatorRepositoryPullLocalDaemon Discovering commits in repository 'GTEST'...
<VERB> PhabricatorRepositoryPullLocalDaemon Examining branch '()_+abcd$100', at a37bc285a12efa7224fe19f3df54cd90fa2b897a.
<VERB> PhabricatorRepositoryPullLocalDaemon Skipping, HEAD is known.
<VERB> PhabricatorRepositoryPullLocalDaemon Examining branch '+abcd$100', at a37bc285a12efa7224fe19f3df54cd90fa2b897a.
<VERB> PhabricatorRepositoryPullLocalDaemon Skipping, HEAD is known.
<VERB> PhabricatorRepositoryPullLocalDaemon Examining branch '_+abcd$100', at a37bc285a12efa7224fe19f3df54cd90fa2b897a.
<VERB> PhabricatorRepositoryPullLocalDaemon Skipping, HEAD is known.
<VERB> PhabricatorRepositoryPullLocalDaemon Examining branch 'abcd$100', at a37bc285a12efa7224fe19f3df54cd90fa2b897a.
<VERB> PhabricatorRepositoryPullLocalDaemon Skipping, HEAD is known.
<VERB> PhabricatorRepositoryPullLocalDaemon Examining branch 'arcpatch', at 774c7737b2d560a291697126bf4513204ccf661a.
<VERB> PhabricatorRepositoryPullLocalDaemon Skipping, HEAD is known.
<VERB> PhabricatorRepositoryPullLocalDaemon Examining branch 'arcpatch-1', at dc97539bee07293f95990d71f4638335a2531d69.
<VERB> PhabricatorRepositoryPullLocalDaemon Skipping, HEAD is known.
<VERB> PhabricatorRepositoryPullLocalDaemon Examining branch 'arcpatch-2', at 1acfaec313c46dd3caa90448800181fb91b0270f.
Reviewers: jungejason
Reviewed By: jungejason
CC: aran
Differential Revision: https://secure.phabricator.com/D2843
Summary: in svn and hg (for now), no branch used.
Test Plan: will test live
Reviewers: epriestley
CC: nh, vrana, aran, Korvin
Differential Revision: https://secure.phabricator.com/D2839
Summary: it's calling pull daemon's failure. This is actually Nick's fix.
Test Plan: Nick already manually ran it on daemon machine.
Reviewers: vrana, nh
Reviewed By: vrana
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D2828
Summary:
The autoclose logic is currently doing a little too much work. We want to parse each commit at most twice:
# When it first appears in the repository.
# When it first appears on an autoclose branch.
These two events might not be distinct (i.e., it might first appear on an autoclose branch).
Currently, to discover commits initially appearing on autoclose branches, we check each branch, determine if it's an autoclose branch or not, and determine if the HEAD is already a known commit on an autoclose branch. This is correct so far, and allows us to ignore branches which either haven't changed or have commits at HEAD which we've already examined.
However, if an autoclose branch has a new commit, we start working backward through it. Prior to this patch, we only stop when we hit commits that we've already discovered lie on this branch. If the branch is new, none of the commits will be discovered on it (they're discovered in general, and likely discovered on other autoclose branches, but not discovered on this branch), so we'll parse all the way back to the root.
Instead, we want to stop when we hit commits that we've already discovered on //any// autoclose branch.
So do that.
Test Plan: Pushed a new branch, then pushed a new commit at HEAD. Ran discovery, verified we rediscovered only 1 commit, not every commit in history.
Reviewers: vrana, jungejason, aurelijus
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1389
Differential Revision: https://secure.phabricator.com/D2798
Summary: This has been a point of some confusion, make the messages more explicit.
Test Plan:
Added var_dump() stuff and ran on some commits:
$ ./scripts/repository/reparse.php --message rP9fc54f4dfb61f7338cb1cfe819bc72d2a3404264
Running 'PhabricatorRepositoryGitCommitMessageParserWorker'...
string(58) "Closed by commit rP9fc54f4dfb61 (authored by @epriestley)."
$ ./scripts/repository/reparse.php --message rP444c634b6c6612fc7b36ddffab8023ef67372ab9
Running 'PhabricatorRepositoryGitCommitMessageParserWorker'...
string(83) "Closed by commit rP444c634b6c66 (authored by Ben Rogers, committed by @epriestley)."
$ ./scripts/repository/reparse.php --message rP22d12fe499e3ecb62392397f2ac2a91768c974aa
Running 'PhabricatorRepositoryGitCommitMessageParserWorker'...
string(52) "Closed by commit rP22d12fe499e3 (authored by vrana)."
$ ./scripts/repository/reparse.php --message rPe51958159483cd0acf00adcff51edf8717b4a23b
Running 'PhabricatorRepositoryGitCommitMessageParserWorker'...
string(85) "Closed by commit rPe51958159483 (authored by David Fisher, committed by @epriestley)."
Reviewers: csilvers, vrana
Reviewed By: csilvers
CC: aran
Differential Revision: https://secure.phabricator.com/D2765
Summary: Implemented it how it was suggested in ticket comments
Test Plan: create a revision in a branch, push that branch up, verify it's visible in diffusion and also that revision is not closed, then merge and push to master, verify that revision closed
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, 20after4
Maniphest Tasks: T1210
Differential Revision: https://secure.phabricator.com/D2706
Summary:
Some e-mail clients display this header and it needs to be constant.
This is somehow involved but I doubt that there is a simpler solution.
Test Plan:
Applied SQL patch.
Commented on revision, commented on commit, changed package.
Verified that the `Thread-Topic` has constant and human readable value.
Reviewers: epriestley
Reviewed By: epriestley
CC: ola, aran, Korvin
Differential Revision: https://secure.phabricator.com/D2745
Summary:
It seems that Outlook and Mail.app mostly ignores the threading headers and thread primarily by subject.
They are also very picky about the Re: part in the header.
I guess that's because users of these clients often hit Reply when they want to create a new message to the sender of an e-mail.
We need both of these applications to work with the same setting because we don't use multiplexing to prevent sending multiple e-mails to people in lists.
I also believe that the default behavior should just work in most setups.
I've tried several different combinations of putting "Re:" and none of them seems to always work in both clients.
This diff at least adds more abstraction to the code which should prevent copy/paste errors (two fixed by this diff!).
Test Plan: Sent several e-mails with varying subject, verified that they look as before in Outlook and Mail.app.
Reviewers: epriestley, nh
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2709
Summary: D2703#13 is confusing - it looks like that @allenjohnashton took the action but it was @epriestley.
Test Plan: I don't have a repro so I tested this block standalone.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2707
Summary: If, e.g., $PATH is broken we may not be able to run "ps". We'll explode pretty hard, currently. Instead, just show a harsher warning.
Test Plan: Changed "ps auxwww" to "psq", which doesn't exist on my system. Loaded page, got warning instead of explosion.
Reviewers: nathanws, vrana, btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2624
Summary:
- `kill_init.php` said "Moving 1000 files" - I hope that this is not some limit in `FileFinder`.
- [src/infrastructure/celerity] `git mv utils.php map.php; git mv api/utils.php api.php`
- Comment `phutil_libraries` in `.arcconfig` and run `arc liberate`.
NOTE: `arc diff` timed out so I'm pushing it without review.
Test Plan:
/D1234
Browsed around, especially in `applications/repository/worker/commitchangeparser` and `applications/` in general.
Auditors: epriestley
Maniphest Tasks: T1103
Summary:
This adds a link to [Closed] e-mail if it detects some changes.
It compares added and removed lines with 3 lines context.
The subtle form of informing is permissive to false negatives and positives.
I have an e-mail filter for [Closed] e-mails so I wouldn't personally notice this change - we should probably promote this feature a little bit.
Test Plan:
Reparse a diff with a change after last update.
Reparse a diff without a change after last update.
Reviewers: jungejason, epriestley
Reviewed By: jungejason
CC: aran, Koolvin, btrahan
Maniphest Tasks: T201
Differential Revision: https://secure.phabricator.com/D2540
Summary: also makes the UI more general for this username + password business.
Test Plan:
- configure a phabricator repository from the svn server @asherwin provided which is configured for svn protocol with SASL
- observed phabricator failing without my patch
- upgraded my SVN client to support SASL (protip for mac users - http://www.wandisco.com/subversion/download#osx)
- applied patch to phabricator
- restarted daemons
- noted daemon success - diffusion populating nicely
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Koolvin
Maniphest Tasks: T1260
Differential Revision: https://secure.phabricator.com/D2549
Summary:
Git and hg (supposedly..) differentiate between an author (who wrote the patch)
and a committer (who applied the patch).
This patch allows Phabricator to note when a patch is committed
by someone other than the Author.
Test Plan:
Created 2 accounts,
- U (Account with a PHID)
- U' (Account without a PHID)
and had them create and commit commits
testing if their username/real name would be displayed correctly in Diffusion,
- BrowserTable
- HistoryTable
- Code revision
Teztz,
A(uthor)/C(ommitter)
If it's A/A then Author committed
UL = User link (<a href="/p/username">username</a>)
UN = User name ("Firstname Lastname")
Tezt | Expected in table | Got
-------------------------------------------
A/A | UL/UL | UL/UL
A'/C | UN/UL | UN/UL
A/C' | UL/UN | UL/UN
A'/C' | UN/UN | UN/UN
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Koolvin
Maniphest Tasks: T688
Differential Revision: https://secure.phabricator.com/D2541
Summary:
This attaches commit diff to its associated revision as any other diff.
The consequence is that the revision page now shows the actual commit instead of the last diff. It may be disturbing but it is desired.
Another consequence is that lint and unit results are displayed as skipped after the revision was committed. I want to fix it somehow.
My next plan is to automatically diff against the last normal diff and include the link to this diff in commit e-mail if non-empty.
Test Plan:
reparse.php
Diff against last normal diff.
Reviewers: epriestley, jungejason
Reviewed By: jungejason
CC: aran, Koolvin, jungejason
Maniphest Tasks: T201
Differential Revision: https://secure.phabricator.com/D2530
Summary:
we were parsing the git log output slightly incorrectly and over-exploding on spaces. we also needed to escape the path %20 stuff`.
Not sure if there's something fancy to do given folks should reparse their repos if they are impacted by this issue.
Test Plan:
made a directory with spaces and some dummy revisions. observed diffs wouldn't load and links broken.
with patch, ran scripts/reparse.php for pertinent revisions and diffs loaded and links weren't broken.
Reviewers: floatinglomas, epriestley
Reviewed By: epriestley
CC: aran, Koolvin
Maniphest Tasks: T1252
Differential Revision: https://secure.phabricator.com/D2510
Summary: If you have an empty value saved in the "default branch" field, we default to empty string (or null, or whatever) instead of the correct default.
Test Plan:
- Looked at a Git repo with an empty default branch, got a default to "master" instead of an error.
- Looked at a Mercurial repo with an empty default branch, got a default to "default" instead of an error.
Reviewers: btrahan, csilvers
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1237
Differential Revision: https://secure.phabricator.com/D2512
Summary:
D2457 and D2459 made some changes here. This little guy just needed to be touched so it could be arc lint'd to have the proper updated include paths
Sorry to spam reviewers; Evan is in Diablo 3 somewhere. :D
Test Plan: no more fatal on test everything implemented (arc unit src/infrastructure/__tests__/)
Reviewers: epriestley, jungejason, nh, csilvers
CC: aran, Koolvin
Differential Revision: https://secure.phabricator.com/D2474
Summary: Prelminary, I want to test this a bit more when I'm better rested. Provide a "bulk" import mode for Mercurial so we can do initial discovery more quickly.
Test Plan: Imported the Mercurial repository in 2m45s, blocked on MySQL I/O rather than Mercurial I/O.
Reviewers: csilvers, btrahan
Reviewed By: csilvers
CC: aran
Differential Revision: https://secure.phabricator.com/D2457
Summary: For git workflows where developers push personal feature branches to the origin, this is a quick workaround until T1210 is implemented properly. I'll also mention this in D2446.
Test Plan:
- Committed a revision in an "autoclose" repository; it was autoclosed. Committed a revision in a no-autoclose repository, it was not autoclosed.
- Edited repositories, saving the "autoclose" setting as enabled/disabled.
Reviewers: aurelijus, btrahan
Reviewed By: aurelijus
CC: aran
Maniphest Tasks: T1210
Differential Revision: https://secure.phabricator.com/D2448
Summary:
- When you have an un-cloned repository, we currently throw random-looking Git/Hg exception. Instead, throw a useful error.
- When you have a cloned but undiscovered repository, we show no commits. This is crazy confusing. Instead, show commits as "importing...".
- Fix some warnings and errors for empty path table cases, etc.
Test Plan:
- Wiped database.
- Added Mercurial repo without running daemons. Viewed in Diffusion, got a good exception.
- Pulled Mercurial repo without discovering it. Got "Importing...".
- Discovered Mercurial repo without parsing it. Got "Importing..." plus date information.
- Parsed Mercurial repo, got everything working properly.
- Added Git repo without running daemons, did all the stuff above, same results.
- This doesn't improve SVN much but that's a trickier case since we don't actually make SVN calls and rely only on the parse state.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T776
Differential Revision: https://secure.phabricator.com/D2439
Summary:
- Merge CommitTask daemon into PullLocal daemon. This is another artifact of past instability (and order-dependent parsers). We still publish to the timeline, although this was the last consumer. Long term we'll probably delete timeline and move to webhooks, since everyone who has asked about this stuff has been eager to trade away the durability and ordering of the timeline for the ease of use of webhooks. There's also no reason to timeline this anymore since parsing is no longer order-dependent.
- Add `phd start` to start all the daemons you need. Add `phd restart` to restart all the daemons you need. So cool~
- Simplify and improve phd and Diffusion daemon documentation.
Test Plan:
- Ran `phd start`.
- Ran `phd restart`.
- Generated/read documentation.
- Imported some stuff, got clean parses.
Reviewers: btrahan, csilvers
Reviewed By: csilvers
CC: aran, jungejason, nh
Differential Revision: https://secure.phabricator.com/D2433
Summary:
See D2418. This merges the commit discovery daemon into the same single daemon, and applies all the same rules to it.
There are relatively few implementation changes, but a few things did change:
- I simplified/improved Mercurial importing, by finding full branch tip hashes with "--debug branches" and using "parents --template {node}" so we don't need to do separate "--debug id" calls.
- Added a new "--not" flag to exclude repositories, since I switched to real arg parsing anyway.
- I removed a web UI notification that you need to restart the daemons, this is no longer true.
- I added a web UI notification that no pull daemon is running on the machine.
NOTE: @makinde, this doesn't change anything from your perspective, but it something breaks this is the likely cause.
This implicitly resolves T792, because discovery no longer runs before pulling.
Test Plan:
- Swapped databases to a fresh install.
- Ran "pulllocal" in debug mode. Verified it correctly does nothing (fixed a minor issue with min() on empty array).
- Added an SVN repository. Verified it cloned and discovered correctly.
- Added a Mercurial repository. Verified it cloned and discovered correctly.
- Added a Git repository. Verified it cloned and discovered correctly.
- Ran with arguments to verify behaviors: "--not MTEST --not STEST", "P --no-discovery", "P".
Reviewers: btrahan, csilvers, Makinde
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T792
Differential Revision: https://secure.phabricator.com/D2430
Summary:
Allow the pull daemon to take a list of repositories. By default, pull all repositories.
Make some effort to respect pull frequencies, although we'll necessarily suffer a bit if running with only one process.
NOTE: We still launch one discovery daemon per working copy, so this only cuts the daemon count in half.
Test Plan:
- Ran `phd debug pulllocal`, verified behavior.
- Ran `pull.php P MTEST SVNTEST --trace`, verified it pulled the repos and ran the right commands.
- Ran `phd repository-launch-master`, verified the right daemons launched, checked daemon console.
- Ran `phd repository-launch-readonly`, verified the right daemon launched, checked daemon console.
Reviewers: btrahan, csilvers, davidreuss
Reviewed By: csilvers
CC: aran
Differential Revision: https://secure.phabricator.com/D2418
Summary:
- Move email to a separate table.
- Migrate existing email to new storage.
- Allow users to add and remove email addresses.
- Allow users to verify email addresses.
- Allow users to change their primary email address.
- Convert all the registration/reset/login code to understand these changes.
- There are a few security considerations here but I think I've addressed them. Principally, it is important to never let a user acquire a verified email address they don't actually own. We ensure this by tightening the scoping of token generation rules to be (user, email) specific.
- This should have essentially zero impact on Facebook, but may require some minor changes in the registration code -- I don't exactly remember how it is set up.
Not included here (next steps):
- Allow configuration to restrict email to certain domains.
- Allow configuration to require validated email.
Test Plan:
This is a fairly extensive, difficult-to-test change.
- From "Email Addresses" interface:
- Added new email (verified email verifications sent).
- Changed primary email (verified old/new notificactions sent).
- Resent verification emails (verified they sent).
- Removed email.
- Tried to add already-owned email.
- Created new users with "accountadmin". Edited existing users with "accountadmin".
- Created new users with "add_user.php".
- Created new users with web interface.
- Clicked welcome email link, verified it verified email.
- Reset password.
- Linked/unlinked oauth accounts.
- Logged in with oauth account.
- Logged in with email.
- Registered with Oauth account.
- Tried to register with OAuth account with duplicate email.
- Verified errors for email verification with bad tokens, etc.
Reviewers: btrahan, vrana, jungejason
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1184
Differential Revision: https://secure.phabricator.com/D2393
Summary: Primarily for @csilvers who has 92 million repositories or something. This is a touch hacky, but movitated by pragmatism.
Test Plan:
- Ran "repository.create" to create repositories, "repository.query" to list them.
- Tested most or maybe all of the error conditions, probably.
Reviewers: btrahan, vrana, csilvers
Reviewed By: csilvers
CC: aran
Differential Revision: https://secure.phabricator.com/D2396
Summary:
This is somewhat controversial but push date is usually more useful than commit date (which can be for example a month before other people can see the commit).
We can also store both dates.
Test Plan:
git log --pretty="%ct %at"
Reviewers: epriestley
Reviewed By: epriestley
CC: nh, aran, Koolvin
Differential Revision: https://secure.phabricator.com/D2319
Summary: "Committed" is SVN-specific language, and confusing in Git and Mercurial. Use neutral language instead.
Test Plan: Inspection.
Reviewers: btrahan, Makinde, vrana, jungejason
Reviewed By: vrana
CC: aran
Maniphest Tasks: T909
Differential Revision: https://secure.phabricator.com/D2087
Summary:
This is slightly more complicated for this reason:
- We don't set `dateCommitted` for normal commits, only for markcommitted.
-- We need to add this date to old revisions now.
Test Plan:
Reparse a revision - commit date was set.
Conduit `markcommitted` - commit date was set.
Run SQL script.
Display closed revision.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Koolvin
Differential Revision: https://secure.phabricator.com/D2282
Summary: Lists the 25 most recent tags on the "Repository" page.
Test Plan: Looked at a git repository with a tag, saw it. Looked at HG/SVN repos, they didn't break.
Reviewers: davidreuss, 20after4, btrahan, vrana, jungejason
Reviewed By: davidreuss
CC: aran
Maniphest Tasks: T1130
Differential Revision: https://secure.phabricator.com/D2255
Summary:
This continues work started at D2215.
Files moved from deleted directory were marked as Copied Here instead of Moved Here.
Test Plan: Reparsed two commits which was previously wrong, now correct.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran
Maniphest Tasks: T1114
Differential Revision: https://secure.phabricator.com/D2229
Summary: This is not perfect. Moved files are reported as deleted but I'm happy with it.
Test Plan: Reparsed two commits which was previously wrong, now semi-correct.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran
Maniphest Tasks: T1114
Differential Revision: https://secure.phabricator.com/D2215
Summary:
- Add an explicit multiplexing option, and enable it by default. This is necessary for Mail.app to coexist with other clients ("Re:" breaks outlook at the very least, and generally sucks in the common case), and allows users with flexible clients to enable subject variance.
- Add an option for subject line variance. Default to not varying the subject, so mail no longer says [Committed], [Closed], etc. This is so the defaults thread correctly in Gmail (not entirely sure this actually works).
- Add a preference to enable subject line variance.
- Unless all mail is multiplexed, don't enable or respect the "Re" or "vary subject" preferences. These are currently shown and respected in non-multiplex cases, which creates inconsistent results.
NOTE: @jungejason @nh @vrana This changes the default behavior (from non-multiplexing to multiplexing), and might break Facebook's integration. You should be able to keep the same behavior by setting the options appropriately, although if you can get the new defaults working they're probably better.
Test Plan:
Send mail from Maniphest, Differential and Audit. Updated preferences. Enabled/disabled multiplexing. Things seem OK?
NOTE: I haven't actually been able to repro the Gmail threading issue so I'm not totally sure what's going on there, maybe it started respecting "Re:" (or always has), but @cpiro and @20after4 both reported it independently. This fixes a bunch of bugs in any case and gives us more conservative set of defaults.
I'll see if I can buff out the Gmail story a bit but every client is basically a giant black box of mystery. :/
Reviewers: btrahan, vrana, jungejason, nh
Reviewed By: btrahan
CC: cpiro, 20after4, aran
Maniphest Tasks: T1097, T847
Differential Revision: https://secure.phabricator.com/D2206
Summary:
PHP arrays have an internal "current position" marker. (I think because foreach() wasn't introduced until PHP 4 and there was no way to get rid of it by then?)
A few functions affect the position of the marker, like reset(), end(), each(), next(), and prev(). A few functions read the position of the marker, like each(), next(), prev(), current() and key().
For the most part, no one uses any of this because foreach() is vastly easier and more natural. However, we sometimes want to select the first or last key from an array. Since key() returns the key //at the current position//, and you can't guarantee that no one will introduce some next() calls somewhere, the right way to do this is reset() + key(). This is cumbesome, so we introduced head_key() and last_key() (like head() and last()) in D2161.
Switch all the reset()/end() + key() (or omitted reset() since I was feeling like taking risks + key()) calls to head_key() or last_key().
Test Plan: Verified most of these by visiting the affected pages.
Reviewers: btrahan, vrana, jungejason, Koolvin
Reviewed By: jungejason
CC: aran
Differential Revision: https://secure.phabricator.com/D2169
Summary:
The audit tools has many false positive about Author Not
Matching with Revision. The fix is to set the authorPHID which was
missing in the existing code
Test Plan:
run reparse.php and it doesn't generate false positive result
anymore.
Reviewers: nh, epriestley
Reviewed By: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D2119
Summary:
- The UI is pretty straightforward, since Handle just works (tm)
- Added two methods to the owners object to handle the new layer of
indirection. Then ran git grep PhabricatorOwnersOwner and changed
callsites as appropriate.
Sending this to get a round of feedback before I test the non-trivial
changes in this diff.
Test Plan:
- owners tool: edit, view, list for basic functionality.
- phlog for the two new methods I added
Reviewers: epriestley, blair, jungejason
CC: aran
Differential Revision: https://secure.phabricator.com/D2079
Summary: NOTE: This is not produced by a script so there might be errors. Please review carefully.
Test Plan: Browse around.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D2091
Summary:
- Show the canonical (i.e., shorter) commit identifier in the subject.
- For commits without a revision, put the commit summary in the subject.
Test Plan: Ran "scripts/repository/reparse.php <commit> --herald" for a number of different commits (with revision, without revision); got more useful email subjects.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T1028
Differential Revision: https://secure.phabricator.com/D2004
Summary: Apparently I spent like a good month copy/pasting slightly different versions of this logic all over the codebase.
Test Plan: Selected "View Options -> Browse in Diffusion" for a chagneset, got a URI with a branch name in it under Git.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1993
Summary:
Currently, we use "git log" to detect the change list for all commits, but this produces no output for merge commits.
Instead, parse them as changes against the first parent (the merge destination). This produces generally sensible/expected behavior, and is consistent with what GitHub does.
We need to special-case the first commit because it doesn't have parents.
NOTE: This is a parser change so you need to run `./scripts/repository/reparse.php --all <callsign> --change` to reparse merge commits in already-imported repositories after updating.
Test Plan: Reparsed a merge commit, a non-merge commit, and the first commit in the Phabricator repository.
Reviewers: btrahan, gschmidt
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T961
Differential Revision: https://secure.phabricator.com/D1985
Summary: We need to build a request in order to pick up an appropriate default branch name, instead of using the raw static generator.
Test Plan: Clicked a symbol link, got /master/path/blahblah
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1982
Summary:
Diffusion request/uri handling is currently a big, hastily ported mess. In particular, it has:
- Tons and tons of duplicated code.
- Bugs with handling unusual branch and file names.
- An excessively large (and yet insufficiently expressive) API on DiffusionRequest, including a nonsensical concrete base class.
- Other tools were doing hacky things like passing ":" branch names.
This diff attempts to fix these issues.
- Make the base class abstract (it was concrete ONLY for "/diffusion/").
- Move all URI generation to DiffusionRequest. Make the core static. Add unit tests.
- Delete the 300 copies of URI generation code throughout Diffusion.
- Move all URI parsing to DiffusionRequest. Make the core static. Add unit tests.
- Add an appropriate static initializer for other callers.
- Convert all code calling `newFromAphrontRequestDictionary` outside of Diffusion to the new `newFromDictionary` API.
- Refactor static initializers to be sensibly-sized.
- Refactor derived DiffusionRequest classes to remove duplicated code.
- Properly encode branch names (fixes branches with "/", see <https://github.com/facebook/phabricator/issues/100>).
- Properly encode path names (fixes issues in D1742).
- Properly escape delimiter characters ";" and "$" in path names so files like "$100" are not interpreted as "line 100".
- Fix a couple warnings.
- Fix a couple lint issues.
- Fix a bug where we would not parse filenames with spaces in them correctly in the Git browse query.
- Fix a bug where Git change queries would fail unnecessarily.
- Provide or improve some documentation.
This thing is pretty gigantic but also kind of hard to split up. If it's unreasonably difficult to review, let me know and I can take a stab at it though.
This supplants D1742.
Test Plan:
- Used home, repository, branch, browse, change, history, diff (ajax), lastmodified (ajax) views of Diffusion.
- Used Owners typeaheads and search.
- Used diffusion.getrecentcommitsbypath method.
- Pushed a change to an absurdly-named file on an absurdly-named branch, everything worked properly.
{F9185}
Reviewers: nh, vrana, btrahan
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1921
Summary:
See <https://github.com/facebook/phabricator/issues/102>. Between Feb 1 and Mar 1, the hg released changed the exit code behavior of "hg pull". This broke us mildly (and a bunch of other applications more severely, which is why it was reverted).
Detect the common case of this (english) and don't fail.
Test Plan: @killermonk, can you try applying this? I'll try to do an upgrade to 2.1 and see if I can also do a proper test.
Reviewers: Makinde, btrahan, killermonk
Reviewed By: btrahan
CC: killermonk, aran, epriestley
Differential Revision: https://secure.phabricator.com/D1948
Summary:
T937 suggests 'inset' could have its own view controller.
It has the following methods:
- setTitle for title
- setRightbutton if you have to place something (preferably a button)
on the right side of the form
- setDescription if you want to describe what it does
- setContent for the main content
- addDivAttributes REALLY not sure about this one but it had to be included
because of a single controller (see owners/controller/edit/PhabricatorOwnersEditController.php:238)
- appendChild works as usual if your form is complex but you still want to remove
->appendChild('<div class..') ->appendChild('</div>');
It might be an overkill so maybe some could be dropped:
- addDivAttributes() and just rewrite how PhabricatorOwnersEditController.php works
- setContent() and use appendChild for the main content?
Test Plan:
- Looked at the controllers in phabricator
- Changed the controller
- Opened the page in another tab
- If something didnd't look the same I fixed it.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1926
Summary: Last of the big final patches. Left a few debatable classes (12 out of about 400) that I'll deal with individually eventually.
Test Plan: Ran testEverythingImplemented.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T795
Differential Revision: https://secure.phabricator.com/D1881
Summary:
svn 1.7 changed their xml format slightly, they now have a
##<?xml version="1.0" encoding="UTF-8"?>## tag instead of
##<?xml version="1.0"?>##. This relaxes matching this tag.
Test Plan: ./scripts/repository/reparse.php rE521979 --change
Reviewers: epriestley, jungejason
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1866
Summary: We've hit a couple of these in the wild, raise better error messages when the local repo is toast / broken / nonsense.
Test Plan: Broke my local repo in all of the different ways we test for, verified I got an error message in each case.
Reviewers: btrahan, abirchall
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T964, T924
Differential Revision: https://secure.phabricator.com/D1855
Summary:
These are all unambiguously unextensible. Issues I hit:
- Maniphest Change/Diff controllers, just consolidated them.
- Some search controllers incorrectly extend from "Search" but should extend from "SearchBase". This has no runtime effects.
- D1836 introduced a closure, which we don't handle correctly (somewhat on purpose; we target PHP 5.2). See T962.
Test Plan: Ran "testEverythingImplemented" unit test to identify classes extending from `final` classes. Resolved issues.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T795
Differential Revision: https://secure.phabricator.com/D1843
Summary:
I'm on a host where I have the PhabricatorRepositoryPullLocalDaemons
tracking a remote repo. In my case, these end up as local git repos in
/var/repo/$name.
I'm working on another daemon that is going to automatically make
changes and commit them back upstream. I figured it would be best to do
this in a new local repo. I'll put these in /var/repo-clones/$name.
It's nice to use the exec*() functions in PhabricatorRepository, so the
approach I thought of was to load the PhabricatorRepository object from
the database, then change its localPath to point at the
/var/repo-clones/$name directory instead.
I didn't really want to change the local-path detail with setDetail(),
as that risks committing the change upstream. It's nice to use the
repo's execLocalCommand() methods though, hence wanting to change the
local path.
Test Plan: None yet.
Reviewers: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1821
Summary: We'll keep deleted branches around right now because Git's behavior is not to remove them without --prune.
Test Plan: Ran "git fetch --all --prune" to make sure it at least ostensibly works.
Reviewers: btrahan, 20after4
Reviewed By: 20after4
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1833
Summary: We currently parse these as directory changes and discard them. Instead, parse them as a new "SUBMODULE" type of change.
Test Plan:
- Reparsed a commit which changes submodules and verified it parses correctly.
- Reparsed a commit which adds submodules and verified it parses correctly.
Reviewers: btrahan, kdeggelman
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1815
Summary:
- Enforce proper workflow rules.
- Fix a derp-bug with patches.
Test Plan:
- Tried to mark a revision I didn't own.
- Tried to mark a revision already marked committed.
- Tried to mark a revision otherwise not accepted.
- Verified daemon can override workflow rules and mark from arbitrary states.
Reviewers: btrahan, Makinde
Reviewed By: Makinde
CC: aran, epriestley
Maniphest Tasks: T948
Differential Revision: https://secure.phabricator.com/D1809
Summary:
Adds an optional "Auditors" field (like "Reviewers") to commit messages which gives installs a zero-config method for making audit requests.
This field does not appear on templates unless set, and is mostly ignored (but validated and preserved) by Differential.
It is then parsed by the daemons if present, and audit requests are pushed to valid users.
Test Plan: Made an "Auditors" commit and verified it was retained with "arc amend --show". Pushed it and verified the audit was triggered.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904, T880
Differential Revision: https://secure.phabricator.com/D1793
Summary:
- Move table to Repository, since we have no Owners joins in the application anymore but would like to do a Repository join.
- Rename "packagePHID" to "auditorPHID", since this column may contain package, project, or user PHIDs.
Test Plan:
- Browsed Owners, Audit, and Differential interfaces to the Audit tool.
- Made comments and state changes.
- Ran "reparse.php --herald --owners" on several commits.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley, nh, vrana
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1787
Summary:
- Users may elect to receive an initial notification about a commit; allow it to be replied to in order to interact with the object.
- Share thread headers between emails.
- Add the "REPLY HANDLER ACTIONS" section to both emails.
Test Plan:
- Used "reparse.php --herald" to trigger herald emails, verified reply-to and email body.
- Made audit comments, verified body.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1762
Summary:
- Add a proper mailKey field to make these things mailable. Backfill all
existing objects.
- Denormalize authorPHID to the commit object so we can query by it
efficiently in a future diff. We currently use the search engine to drive
"commits by author" but that's not so good for audit, which needs more
constraints.
- Add an overall audit status field so we can efficiently query "commits that
needs your attention".
- Add enough code to convince myself that these fields are basically
reasonable and work correctly.
Test Plan:
- Ran schema upgrades. Checked database state afterward.
- Ran "reparse.php --owners --herald" to verify worker changes.
- Looked at a commit, altered aggregate status via audits / reparse.php,
verified it responded correctly.
Reviewers: btrahan, jungejason
Reviewed By: jungejason
CC: aran, epriestley, nh
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1706
Summary: See D1707 -- just in case the Phabricator server is configured
suspiciously.
Test Plan: Cursory inspection.
Reviewers: Makinde, btrahan
Reviewed By: Makinde
CC: aran, epriestley
Maniphest Tasks: T922
Differential Revision: https://secure.phabricator.com/D1708
Summary:
When users submit an audit, send email to relevant parties informing them.
Allow email to be replied to. Just basic support so far; no "!raise" stuff and
no threading with the Herald commit notification.
Test Plan: Made comments, got email. Replied to email, got comments.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1698
Summary: Add audit information to the commit search index.
Test Plan: Updated a commit, searched for terms in its comments, got hits.
Reviewers: btrahan, jungejason
Reviewed By: jungejason
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1696
Summary:
Allows you to write a commit rule that triggers an audit by a user (personal
rules) or a project (global rules).
Mostly this is trying to make auditing more lightweight and accessible in
environments where setting up Owners packages doesn't make sense.
For instance, Disqus wants a rule like "trigger an audit for everything that
didn't have a Differential revision". While not necessarily scalable, this is a
perfectly reasonable rule for a small company, but a lot of work to implement
with Owners (and you'll get a lot of collateral damage if you don't make every
committer a project owner).
Instead, they can create a project called 'Unreviewed Commits' and write a rule
like:
- When: Differential revision does not exist
- Action: Trigger an Audit for project: "Unreviewed Commits"
Then whoever cares can join that project and they'll see those audits in their
queue, and when they approve/raise on commits their actions will affect the
project audit.
Similarly, if I want to look at all commits that match some other rule (say,
XSS) but only want to do it like once a month, I can just set up an audit rule
and go through the queue when I feel like it.
NOTE: This abuses the 'packagePHID' field to also store user and project PHIDs.
Through the magic of handles, this (apparently) works fine for now; I'll do a
big schema patch soon but have several other edits I want to make at the same
time.
Also:
- Adds an "active" fiew for /audit/, eventually this will be like the
Differential "active" view (stuff that is relevant to you right now).
- On commits, highlight triggered audits you are responsible for.
Test Plan: Added personal and global audit triggers to Herald, reparsed some
commits with --herald, got audits. Browsed all audit interfaces to make sure
nothing exploded. Viewed a commit where I was responsible for only some audits.
Performed audits and made sure the triggers I am supposed to be responsible for
updated properly.
Reviewers: btrahan, jungejason
Reviewed By: jungejason
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1690
Summary:
@rguerin ran into an issue in his install where Phabricator appears to have
discovered commits which no longer exist, and thus is failing to proceed with
its repository import.
It's not clear how we got into this state. Previously, it was possible by, e.g.,
parsing a different repository's working copy and then switching them back, but
there are now safeguards against that.
I'm taking a three-pronged approach to try to sort this out:
- Provide a script to get out of this state (this script) and reconcile
Phabricator's view of a repository with an authoritative copy of it. This
basically "un-discovers" any discovered commits which don't actually exist (any
queued tasks to parse them will fail permanently when they fail to load the
commit object).
- Add more logging to the discovery daemon so we can figure out where commits
came from.
- Improve Diffusion's UI when stuff is partially discovered (T776).
(This script should also clean up some nonsense on secure.phabricator.com from a
botched Diviner import.)
Test Plan: Ran "reconcile.php" with bogus commits and bogus differential/commit
links, had them expunged. Will work with @rguerin to see if this resolves
things.
Reviewers: btrahan, rguerin
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1552
Summary:
Fix two issues in PhabricatorRepositoryCommitOwnersWorker:
- if a commit was reviewed by some owner of the package, it should not be
marked as needing audit
- do not run herald worker when it is not needed (for example, when the
worker is executed from reparse.php)
Test Plan:
reparse a commit which is reviewed by the owner of a package
and verify that it is not marked as needing audit, and herald is not
executed.
Reviewers: nh, epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1496
Summary:
- Only write the <ruleID, phid> row if the rule is a one-time rule.
- Delete all the rows for rules which aren't one-time.
NOTE: This is probably like several million rows for Facebook and could take a
while.
Test Plan:
Added some one-time and every-time rules, ran them against objects, verified
only relevant rows were inserted.
Ran upgrade script against a database with one-time and every-time "ruleapplied"
rows, got the irrelevant rows removed.
Reviewers: nh, btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1484
Summary:
Herald rules may be marked as "one-time". We track this by writing a row with
<ruleID, phid> when we apply a rule.
However, the current test for rule application involves loading every <ruleID,
*> pair. We also always write this row even for rules which are not one-time, so
if there are 100 rules, we'll load 1,000,000 rows after processing 10,000
objects.
Instead, load only the <phid, *> pairs, which are guaranteed to be bounded to at
most the number of rules.
I'll follow up with a diff that causes us to write rows only for one-time rules,
and deletes all historic rows which are not associated with one-time rules.
Test Plan:
Grepped for callsites to loadAllByContentTypeWithFullData(). Ran
rules in test console.
Reviewers: nh, btrahan, jungejason
Reviewed By: nh
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1483
Summary:
- Make some editing operations transaction-oriented, like Maniphest. (This
seems to be a good model, particularly for extensibility.) I'll move the rest of
the editing operations to transactions in future diffs.
- Make transaction-oriented operations publish feed stories.
Test Plan:
- Created a new project.
- Edited an existing project.
- Created a new project via quick create flow from Maniphest.
- Verified feed stories publish correctly.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T681
Differential Revision: https://secure.phabricator.com/D1477
Summary:
enable herald commit rules to have access to auditing info.
Note that the new herald condition I added contains info for the
packages. I thought about using a simpler herald condition like
"Requires audit is true or false" and let it work together with the
existing "Affected package contains any of the package". It doesn't work
because we need the info about the package to decide if the commit
requires audit, but the herald conditions work separately.
Test Plan:
- A commit requiring auditing was detected by a herald rule that checks
the auditing status
- A commit not requiring auditing was not detected by a herald rule
which checks auditing status, but was detected by a rule which doesn't
check the auditing status
Reviewers: epriestley, nh
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1399
Summary: @s reported an issue with implicit file:// URIs in Git, see P270.
Recognize and handle URIs in this format. For URIs we don't understand, raise an
exception.
Test Plan:
- Added failing tests.
- Fixed code.
- Tests pass.
Reviewers: btrahan, jungejason, s
Reviewed By: s
CC: aran, epriestley, s
Differential Revision: https://secure.phabricator.com/D1362
Phabricator
Summary: ...this breaks without D1328. Used good ole "codemod" to do this
work, with lots of manual edits around 80 chars.
Test Plan: clicked around phabricator tool suite, particular differential, a
bunch
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1351
Summary:
Provide an easy way to jump to Diffusion from Differential if we have
the data we need to connect them.
Test Plan: Tested menu in linked and unlinked diffs. Used menu item.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley, btrahan
Maniphest Tasks: T309
Differential Revision: https://secure.phabricator.com/D1326
Summary: These seem to work relatively reasonably and don't have any known
deal-breaking failures.
Test Plan: shrug~
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, btrahan
Differential Revision: https://secure.phabricator.com/D1324
corresponding ConduitAPI
Summary: reasonable title... also made this new functionality used by the
repository worker for parsing diffs
Test Plan:
- looked at the conduit console and queried for various types of hashes,
including hashes with no match. got correct results.
- identified a reasonable diff from a local git repo. set the revision status
to 2 (ACCEPTED) in the database. augmented the worker parser code to var_dump
and die after finding revision id. ran scripts/repository/reparse.php
--message rX and verified my var_dumps. removed var_dumps and die and ran
reparse.php again with same paramters. verified revision looked good in
diffusion and there were no errors.
- repeated the above reparse.php jonx for a mercurial repo. note svn isn't in
this hash game so that test was particularly exciting no-op'dness i did not
bother with
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, btrahan, epriestley
Differential Revision: https://secure.phabricator.com/D1315
Summary:
Some installs use Git as the backbone of a CI framework or use a Git remote to
share patches. The tracker scripts currently recognize associated revisions as
"Committed" when they appear in any branch, even if that branch is
"alincoln-personal-development_test_hack" or whatever.
To address the broadest need here, allow Git repositories to be configured to
track only certain branches instead of all branches.
This doesn't allow you to import a branch into Diffusion but ignore it in
Differential. Supporting that is somewhat technically complicated because the
parser currently goes like this:
- Look at HEAD of all branches.
- For any commits we haven't seen before, follow them back to something we
have seen (or the root).
- "Discover" everything new.
Since this doesn't track <branch, commit> pairs, we currently don't have enough
information to tell when a commit appears in a branch for the first time, so we
don't have anywhere we can put a test for whether that branch is tracked and do
the Differential hook only if it is.
However, I think this cruder patch satisfies most of the need and is simple and
obvious in its implementation.
See also D1263.
Test Plan:
- Updated a Git repository with various filters: "", "master, remote", "derp",
" ,,, master ,,,,,"
- Edited SVN and Mercurial repositories to verify they didn't get caught in
the crossfire.
- Ran daemon in debug mode on libphutil with filter "derp", got exception
about no tracked branches. Ran with filter "master", got tracking. Ran with no
filter, got tracking.
- Looked at Diffusion with "derp" and "master", saw no branches and "master"
respectively.
- Added unit tests to cover filtering logic.
Reviewers: btrahan, jungejason, nh, fratrik
Reviewed By: fratrik
CC: aran, fratrik, epriestley
Maniphest Tasks: T270
Differential Revision: https://secure.phabricator.com/D1290
