Summary: Fixes T10139. This clarification seems reasonable to me.
Test Plan:
- Viewed a revision with context.
- Clicked "Show All Context".
- Saw "All Context Shown".
{F1060624}
{F1060625}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10139
Differential Revision: https://secure.phabricator.com/D15009
Summary: Fixes T8572. Ideally we would probably just permit this, but clean up the behavior until the day arrives when inline code is actually rewritten.
Test Plan:
- Tried to launch editors in Differential and Diffusion while comments were already open.
- Verified that "Jump to inline" works in both cases.
{F788008}
{F788009}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8572
Differential Revision: https://secure.phabricator.com/D14094
Summary: Ref T8095. This weird grey table has no remaining callsites and can be removed.
Test Plan: Grepped for symbols.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8095
Differential Revision: https://secure.phabricator.com/D13379
Summary:
Ref T7447. Implements per-viewer comment hiding. Once a comment is obsolete or uninteresting, you can hide it completely.
This is sticky per-user.
My hope is that this will strike a better balance between concerns than some of the other approaches (conservative porting, summarization, hide-all).
Specifically, this adds a new action here:
{F435621}
Clicking it completely collapses the comment into a small icon on the previous line, and saves the comment state as hidden for you:
{F435626}
You can click the icon to reveal all hidden comments below the line.
Test Plan:
- Hid comments.
- Showed comments.
- Created, edited, deleted and submitted comments.
- Used Diffusion comments (hiding is not implemented there yet, but I'd plan to bring it there eventually if it works out in Differential).
Reviewers: btrahan, chad
Reviewed By: btrahan
Subscribers: jparise, yelirekim, epriestley
Maniphest Tasks: T7447
Differential Revision: https://secure.phabricator.com/D13009
Summary: Fixes T4846. These are one off (for now) since they have various crazy actions with them. I think this will get unified and more cleaned up when we refine the UI for taking multiple actions at once, etc.
Test Plan: noted no "commented on x" in either maniphest or differential. starting making a comment and noted prevew showed. started adding a subscriber (added to tokenizer) and preview showed.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T4846
Differential Revision: https://secure.phabricator.com/D12936
Summary: Fixes T8098. This parameter was being misinterpreted over the wire.
Test Plan: Replied to left-side inline, got left-side reply.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8098
Differential Revision: https://secure.phabricator.com/D12747
Summary:
Ref T1460. Overall:
- Pass `objectOwnerPHID` consistently.
- Pass viewer consistently.
- Set the correct draft state for checkboxes on the client.
Test Plan:
- Made inline comments in Differential.
- Made inline comments in Diffusion.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12186
Summary: Ref T7660. I'm not toggling "inline-state-is-draft" correctly in JS yet since it's a little tricky (you can reload to see it) but the main state should work.
Test Plan:
- Clicked "done", saw comment opacity fade with placeholder style.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T7660
Differential Revision: https://secure.phabricator.com/D12160
Summary:
Fixes T7658. Currently, we remove the "undo" before placing the comment, but that causes us to lose track of which row we should be examining.
Instead, place the comment first, then remove the "undo".
Test Plan: This stuff is hard to test comprehensively, but the original report reproduced easily and is now fixed. I wasn't able to break anything by adding/editing/deleting comments.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T7658
Differential Revision: https://secure.phabricator.com/D12157
Summary:
Ref T5644. See some discussion in D8040.
When a file is very large (more than 64KB of text), don't activate syntax highlighting by default. This should prevent us from wasting resources running `pygmentize` on enormous files.
Users who want the file highlighted can still select "Highlight As...".
The tricky part of this diff is separating the headers into "changeset" headers and "undershield" (rendering) headers. Specifically, a file might have these headers/shields:
- "This file is newly added."
- "This file is generated. Show Changes"
- "Highlighting is disabled for this large file."
In this case, I want the user to see "added" and "generated" when they load the page, and only see "highlighting disabled" after they click "Show Changes". So there are several categories:
- "Changeset" headers, which discuss the changeset as a whole (binary file, image file, moved, added, deleted, etc.)
- "Property" headers, which describe metadata changes (not relevant here).
- "Shields", which hide files from view by default.
- "Undershield" headers, which provide rendering information that is only relevant if there is no shield on the file.
Test Plan:
- Viewed a diff with the library map, clicked "show changes", got a "highlighting disabled" header back with highlighting disabled.
- Enabled highlighting explicitly (this currently restores the shield, which it probably shouldn't, but that feels out of scope for this change). The deshielded file is highlighted per the user's request.
- Loaded context on normal files.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T5644
Differential Revision: https://secure.phabricator.com/D12132
Summary:
Ref T1460. This just barely works, but throwing it up in case any of it sounds mechanically crazy before we build integrations/UI/etc.
Specifically, these are the behaviors:
- You can mark your own draft comments as "done" before you submit them. The intent is to let reviewers mark their stuff advisory/minor/not-important before they submit it, to hint to authors that they don't expect the feedback to necessarily be addressed (maybe it's a joke, maybe it's just discussion, maybe it's "consider..").
- You can mark others' published comments as "done" if you're the revision/commit author. The intent is to keep this lightweight by not requiring an audit trail of who marked what done when. If anyone could mark anything done, we'd have to have some way to show who marked stuff.
- When you mark stuff done (or unmark it), it goes into a "draft" state, where you see the change but others don't see it yet. The intent is twofold:
- Be consistent with how inlines work.
- Allow us to publish a "epriestley updated this revision + epriestley marked 15 inlines as done" story later if we want. This seems more useful than publishing 15 "epriestley marked one thing as done" stories.
- The actual bit where done-ness publishes isn't implemented.
- UI is bare bones.
- No integration with the rest of the UI yet.
Test Plan: Clicked some checkboxes.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: paulshen, chasemp, epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12033
Summary:
Ref T2009. Ref T1460.
Fixes T2618. When users hit "Delete" on inline comments, delete immediately and offer them "Undo". If they delete indirectly (e.g., by clicking "Delete" from the preview at the bottom of the page), we still prompt them, because the "Undo" action either won't be available or may not be easy to find. This is a "refdelete".
Fixes T6464. This was just a mess. Make it not as much of a mess. It should work now. Pretty sure.
Fixes T4999. We did not refresh these links often enough to find targets for them, so they could race with content. Reevaluate them after loading new changes.
Test Plan:
- Deleted and undid deletion of inlines from main view and preview.
- Clicked "View" on inlines.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6464, T4999, T2618, T1460, T2009
Differential Revision: https://secure.phabricator.com/D12032
Summary:
Ref T2009. This is another almost-identical copy of the row scaffolding, which has the same 1up/2up bugs as the 8 other copies of this code.
Turn the "undo" element into an InlineCommentView so we can scaffold it.
Then, scaffold it with the same code as everything else.
Test Plan: Hit "Undo", swapped from 1up to 2up, hit "undo" again, swapped back, tried left/right, everything rendered with proper scaffolding.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12019
Summary:
Ref T1460. Track and store which comments are threaded replies to other comments, vs merely appearing on the same lines.
This doesn't actually write `hasReplies` yet, since that needs to happen when we un-draft comments on submission.
Test Plan: Made inline comments in Differential and Diffusion, including replies. Replies were marked as "Is Reply".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12017
Summary:
Fixes T4452. Ref T2009. There's a hierarchy of changeset rendering power: only low-level calls, use of ChangesetDetailView, then use of ChangesetListView (a list of DetailViews).
Prior to work here, the various changeset rendering controllers got their hands dirty to varying degrees, with some using only the lowest-level rendering pipeline:
- Phriction: no view (lowest level)
- Diffusion: DetailView
- Differential Changeset: DetailView
- Differential Diff: ListView
- Differential Revision: ListView
I brought Phriction up to use DetailView, but want to bring everything all the way up to use ListView. Each composition layer adds more features to diff browsing. In particular, this change enables "Highlight As", switching 1up vs 2up, adding inlines, etc., on the standalone view.
Test Plan:
- Viewed a changeset standalone. Could change highlighting, switch 1up vs 2up, add and edit inlines, etc.
- Viewed a revision; no behavioral changes.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4452, T2009
Differential Revision: https://secure.phabricator.com/D12012
Summary:
Ref T2009. Currently, the code figures out if a comment is on the left or right by looking at the `<th />` preceeding the enclosing `<td />`.
This gets the right result in 2-up, but in 1-up rows are always `<th />`, `<th />`, `<td />`, so it always detects every inline as being in the new file.
Because "old" and "new" cells aren't inherently distingushable in the 1up view, we can't use a DOM test for this at all. Instead, just track this state explicitly.
Test Plan:
- Made left/right comments in 1up view and 2up view.
- Viewed them in 1up and 2up views.
- Hovered in 1up and 2up views.
- Diff-of-diff'd and reviewed old/new comments, then made some more.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12011
Summary:
Ref T2009. Right now, when you mouse over a line number, we change the cursor to a "pointer", but that's the only hint we provide about the existence of inline comments.
Occasionally, users have reported confusion around how to leave inline comments.
Try to increase discoverability by showing the line reticle when you hover over the line.
(I could take this or leave it, but it seems OK / not annoying after 15 seconds of playing with it.)
Test Plan: Waved cursor over line numbers, attempted to test all the editor/noncontiguous/across-files cases.
Reviewers: btrahan, chad
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12010
Summary:
Ref T2009. Currently, the code which draws the reticle is sort of implicitly hard-coded with some of the rules for the 2up view.
Instead, use general rules:
- Start selection at the next `<td />`.
- End selection at the rightmost adjacent `<td />`.
These rules work in all cases.
Test Plan:
- Activated reticle in 1up and 2up views by clicking line numbers and hovering over comments. It now draws correctly.
- Dragged over line ranges in 1up and 2up views, saw accurate reticle.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12009
Summary:
Ref T2009. This reduces how buggy inlines are. They're still buggy.
Specifically, the inline endpoint didn't know how to scaffold inlines before, so some of them ended up rendering in the wrong rows or breaking layouts.
This passes the current renderer through to the inline editor endpoint, so it can at least get the layout correct.
Test Plan: Interacted with inlines in unified and side-by-side views.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11988
Summary:
These aren't being populated yet; they mostly fix some JS errors with inlines.
For example, the inline hover reticle relies on adjusting its width to account for the "copy" column, and failed when the column did not exist.
Test Plan:
- Hovering inlines in unified now works, mostly.
- Interacted with inlines in side-by-side.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11985
Summary: Ref T2009. It doesn't make sense to have these as separate behaviors. We require a ChangesetViewManager to track view parameter state.
Test Plan: Interacted with changesets in Phriction, Differential and Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11979
Summary:
Ref T2009. Currently, we do not persist view parameters when making context rendering requests.
The big one is the renderer (1up vs 2up). This makes context on unified diffs come in with too many columns.
However, it impacts other parameters too. For example, at HEAD, if you change highlighting to "rainbow" and then load more context, the context uses the original highlighter instead of the rainbow highlighter.
This moves context loads into ChangesetViewManager, which maintains view parameters and can provide them correctly.
- This removes "ref"; it is no longer required, as the ChangesetViewManager tracks it.
- This removes URI management from `behavior-show-more`; it is no longer required, since the ChangesetViewManager knows how to render.
- This removes "whitespace" since this is handled properly by the view manager.
Test Plan:
- Used "Show Top" / "Show All" / "Show Bottom" in 1-up and 2-up views.
- Changed file highlighting to rainbow, loaded stuff, saw rainbow stick.
- Used "Show Entire File" in 1-up and 2-up views.
- Saw loading chrome.
- No loading chrome normally.
- Made inlines, verified `copyRows()` code runs.
- Poked around Diffusion -- it is missing some parameter handling, but works OK.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11977
Summary: Ref T2009. These aren't good enough to actually use so I won't land this yet, but it makes testing changes a lot easier.
Test Plan:
- Swapped setting.
- Loaded revisions.
- Saw setting respected.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11972
Summary: Use `x.y` in favor of `x['y']` in //some// JavaScript callsites. Note that there are a bunch of places where the latter is explicitly used to trick `PhabricatorJavelinLinter`.
Test Plan: `arc lint`
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11442
Summary:
Fixes T7054. Fixes T7049.
- Stop scrolling Differential reticles when the page scrolls.
- Make dialogs aware of multi-panel UI.
Test Plan:
- Dialogs pop up in the right place.
- Inline + scroll now longer leaves the inline in a fixed position.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T7049, T7054
Differential Revision: https://secure.phabricator.com/D11523
Summary: Fixes T7033. When we've reframed the main page content we need to scroll relative to the containing frame, not relative to the window.
Test Plan:
In Safari, Chrome and Firefox, used j/k/J/K keys to navigate diff content.
Tried some other scroll-based beahviors, like jump-to-anchors.
(It looks like the highlighting reticle got slightly derped a while ago, but it's still functional, so I didn't mess with it.)
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T7033
Differential Revision: https://secure.phabricator.com/D11490
Summary: This should be a local variable, not a global variable. This silences a few JSHint warnings.
Test Plan: `arc lint`
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11070
Summary: we still need to be pager-sensitive, but otherwise this "show all" stuff is dead, dead dead...! Ref T4712. I think we can close the book on T4712 with one more diff to clean up the array_reverse / reverse paging stuff? That diff is probably a bit tricky as it involes auditing every TransactionQuery callsite...
Test Plan: viewed a task with a lot of transactions. clicked "show older" and it worked!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T4712
Differential Revision: https://secure.phabricator.com/D10926
Summary: Right now, if no comment is selected the JS executes and throws an exception. Instead, if nothing is selected just do nothing. Fixes T6107.
Test Plan: opened up a commit in diffusion with an inline comment. pressed 'r' and saw no exceptions and nothing happen. pressed 'n' to select the next inline comment and then 'r' and it worked. opened up a commit in diffusion without any inline comments. pressed 'r' and saw no exceptions and nothing happen. opened up a diff in differential with an inline comment. pressed 'r' and saw no exceptons and nothing happened. pressed 'n' to select the next inline comment and then 'r' and it worked.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6107
Differential Revision: https://secure.phabricator.com/D10843
Summary: Fixes T3913.
Test Plan: messed around with a comment on a commit and saw preview still updating correctly
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T3913
Differential Revision: https://secure.phabricator.com/D10382
Summary: Various fixes as suggested by JSHint.
Test Plan: Eye-balled it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9783
Summary: There are a bunch of unused variables in JavaScript files. These were identified with JSHint.
Test Plan: It's pretty hard to test this thoroughly... on inspection, it seems that everything //should// be okay (unless we are doing weird things with the JavaScript).
Reviewers: chad, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9676
Summary: Ref T5179. Ref T4045. Ref T832. We can now write non-utf8 hunks into the database, so try to do more reasonable things with them in the UI.
Test Plan: (See screenshots...)
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T832, T4045, T5179
Differential Revision: https://secure.phabricator.com/D9294
Summary:
Ref T5179. Currently, all the changeset rendering logic is in the "populate" behavior, and a lot of it comes in via configuration and is hard to get at.
Instead, surface an object which can control it, and which other behaviors can access more easily.
In particular, this allows us to add a "Load/Reload" item to the view options menu, which would previously have been very challenging.
Load/Reload isn't useful on its own, but is a step away from "Show whitespace as...", "Highlight as...", "Show tabtops as...", "View Unified", "View Side-By-Side", etc.
Test Plan:
- Viewed Differential.
- Viewed Diffusion.
- Viewed large changesets, clicked "Load".
- Used "Load" and "Reload" from view options menu.
- Loaded all changes in a large diff, verified "Load" and TOC clicks take precedence over other content loads.
- Played with content stability stuff.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5179
Differential Revision: https://secure.phabricator.com/D9286
Summary: Takes a pass at standardizing spacing and colors for lists and tokens.
Test Plan: Tested a lot of lists, policy, timeline, quick create, diffusion.
Reviewers: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9325
Summary:
Updates policy, headers, typeaheads to FA over policy icons
Need advice - can't seem to place where icons come from on Typeahead? Wrong icons and wrong colors.... it is late
Test Plan:
- grepped for SPRITE_STATUS
- grepped for sprite-status
- grepped for setStatus for headers
- grepped individual icons names
Browsed numerous places, checked new dropdowns, see pudgy people.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4739
Differential Revision: https://secure.phabricator.com/D9179
Summary:
Fixes T430. Fixes T4834. Obsoletes D7641. Currently, we do some things less-well than we could:
- We just let the browser queue and prioritize requests, so if you load a revision with 50 changes and then click "Award Token", the action blocks until the changes load in most/all browsers. It would be better to prioritize this action and queue it immediately.
- Similarly, changes tend to load in order, even if the user has clicked to a specific file. When the user expresses a preference for a specific file, we should prioritize it.
- We show a spinning GIF when waiting on requests. This is appropriate for some types of reuqests, but distracting for others.
To fix this:
- Queue all (or, at least, most) requests into a new queue in JX.Router.
- JX.Router handles prioritizing the requests. Principally:
- You can submit a request with a specific priority (500 = general content loading, 1000 = default, 2000 = explicit user action) and JX.Router will get the higher stuff fired off sooner.
- You can name requests and then adjust their prorities later, if the user expresses an interest in specific results.
- Only use the spinner gif for "workflow" requests, which is bascially when the user clicked something and we're waiting on the server. I think it's useful and not-annoying in this case.
- Don't show any status for draft requests.
- For content requests, show a subtle hipster-style top loading bar.
Test Plan:
- Viewed a diff with 93 changes, and clicked award token.
- Prior to this patch, the action took many many seconds to resolve.
- After this patch, it resolves quickly.
- Viewed a diff with 93 changes and saw a pleasant subtle hipster-style loading bar.
- Viewed a diff with 93 changes and typed some draft text. Previews populated fairly quickly and there was no spinner.
- Viewed a diff with 93 changes and clicked something with workflow, saw a spinner after a moment.
- Viewed a diff with 93 changes and clicked a file in the table of contents near the end of the list.
- Prior to this patch, it took a long time to show up.
- After this patch, it loads directly.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T430, T4834
Differential Revision: https://secure.phabricator.com/D8979
Summary:
Dropdown menus are entirely dynamic right now and use custom CSS. Begin rebuilding them to use ActionList CSS.
This introduces PHUIX components which are basically JS copy/pastes of the PHP PHUI components, just implemented in JS.
We have two other dropdowns: policy controls and one in Conpherence. I'll convert those, then implement D8966.
Test Plan: {F150418}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8973
Summary: Ref T2222. Makes the "lint/unit errors" warnings work again.
Test Plan: Viewed some revisions with and without these warnings.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8475
Summary:
Ref T2222. This restores the "N older comments are hidden." shield to all ApplicationTransactions applications. Roughly the rule this uses is that transactions older than your most recent comment are hidden, under the assumption that you've already read and dealt with them, since you replied afterward. Then we show your last comment to remind/contextualize you, and anything afterward. We also don't hide transactions if we'd only be hiding a handfull, and we never hide the few most recent transactions.
This might need some #design help.
Test Plan:
The tricky part here is the anchor rule, which deals with the case where you follow a link to `T123#4`, but that would normally be hidden. We simulate a click on "show all" if you hit an anchor which is hidden. Here's what it looks like in Maniphest:
{F112891}
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8229
Summary:
Fixes T3814. Broadly, remarkup tables in inline comments did not work properly. I ran into several messes here and cleaned up some of them:
- Some of this code is doing `JX.$N('div', {}, JX.$H(response.markup))`, to turn an HTML response into a node, passing that around, and then doing junk with it. This is super old and gross.
- The slightly more modern pattern is `JX.$H(response.markup).getFragment().firstChild`, but this is kind of yuck too and not as safe as it could be.
- Introduce `JX.$H(response.markup).getNode()`, which actually expresses intent here. We have a bunch of `getFragment().firstChild` callsites which should switch to this, but I didn't clean those up yet because I don't want to test them all.
- Switch the `JX.$N('div', {}, JX.$H(response.markup))`-style callsites to `JX.$H(response.markup).getNode()`.
- `copyRows()` is too aggressive in finding `<tr />` tags. This actually causes the bug in T3814. We only want to find these tags at top level, not all tags. Don't copy `<tr />` tags which belong to some deeper table.
- Once this is fixed, there's another bug with mousing over the cells in tables in inline comments. We select the nearest `<td />`, but that's the cell in the remarkup table. Instead, select the correct `<td />`.
- At this point, these last two callsites were looking ugly. I provided `findAbove()` to clean them up.
Test Plan: Created, edited, deleted, moused over, and reloaded a revision with inline comments including remarkup tables. Used "Show more context" links.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3814
Differential Revision: https://secure.phabricator.com/D6924
Summary: take epriestley's feedback 'cuz its good
Test Plan: collapse, expand, use undo like a rockstar. observe proper behavior
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Maniphest Tasks: T2258
Differential Revision: https://secure.phabricator.com/D6748
Summary: Fixes T2258.
Test Plan: collapsed and expanded file via the dropdown - good stuff. got the "undo" element into the mix - also good stuff.
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, Korvin, aran
Maniphest Tasks: T2258
Differential Revision: https://secure.phabricator.com/D6742
Summary:
1. Show add reviewer typehead when user selects resign as a reviewer.
2. Change the label for add reviewers typehead when user selects resign as a reviewer.
Test Plan:
1. Add yourself as a reviewer in a diff.
2. Select "Resign as Reviewer" in comment editor.
Add reviewer typehead should display, with label "Suggest Another Reviewer".
Add reviewer typehead is also displayed after user refreshed the page with "Resign as Reviewer"
selected.
Reviewers: wez, epriestley
Reviewed By: epriestley
CC: aran, epriestley, akramer, person
Differential Revision: https://secure.phabricator.com/D6340
Summary: If `jsxmin` is not available, use a pure PHP implementation instead (JsShrink).
Test Plan:
- Ran `arc lint --lintall` on all JS and fixed every relevant warning.
- Forced minification on and browsed around the site using JS behaviors. Didn't hit anything problematic.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5670
Summary:
Ref T3099. Currently, we expand comments in Differential when //any// anchor is present. This creates a scrolling issue described in T3099. Instead, expand them only when the anchor contains `comment`.
We can go further here, but this should fix the immediate issue.
Test Plan: Viewed `/D22`, `/D22#toc`, and `/D22#comment-3`. The first two did not expand comments; the last one did.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3099
Differential Revision: https://secure.phabricator.com/D5836
Summary: This is a simpler version of D5649.
Test Plan: Switched to ALL CAPS translation and clicked View Options.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1139
Differential Revision: https://secure.phabricator.com/D5759
