Summary:
Ref T7298. We are currently inconsistent about when we publish feed, email, notifications, audits and Herald rules.
Specifically, there are two settings which impact these things:
- The "importing" flag, which is set when we're importing old commits.
- The "herald-disabled" flag, which was expanded in scope some time ago and now actually means "disable publishing".
Various parts of the pipeline were checking only one of these flags. Instead, all of them should check both.
(For example, we should never email users about importing repositories, nor trigger audits on them.)
Test Plan: See next revision.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7298
Differential Revision: https://secure.phabricator.com/D11826
Summary: Fixes T6840. Depends on D11822, which is a little iffy.
Test Plan:
Verified all references to `importStatus` are either:
- SQL patches creating the column;
- reads;
- writes immediately before an insert; or
- explicit updates of the column.
That is, I identified no cases of `setImportStatus(X)->save()` on a Commit which may already exist. This //would// break that.
In general, almost all writes go through `$commit->writeImportStatusFlag()`, which is an explicit update.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6840
Differential Revision: https://secure.phabricator.com/D11823
Summary:
Fixes T7310. We have a whole mechanism for surfacing update errors, but only surface actual update errors, not pull errors.
Instead, surface pull errors too.
Then format them a little more nicely.
Test Plan: {F309769}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7310
Differential Revision: https://secure.phabricator.com/D11821
Summary:
Fixes the long uptake we saw on `meta.phacility.com`. I regressed this in D11795.
We make three calls to this method, but only one actually consumes the messages. The other two are just checking to see if there are any messages.
Only move the cursor up if we're actually going to process the messages.
Test Plan: Sort of tricky to test convincingly since it's inherently race-prone, but ran `debug pulllocal` and pushed update messages and saw it pick them up.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11808
Summary:
Ref T6941. In the cluster (and in other reasonable setups) we've separated SSH load balancers from HTTP load balancers.
In particular, ELBs will not let you load balance port 22, so this is likely a reasonable/common issue in larger clusters in AWS.
Allow users to specify an alternate host for SSH traffic.
Test Plan: Set host to someting different, saw it reflected in UI.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6941
Differential Revision: https://secure.phabricator.com/D11800
Summary: Fixes T7106. If you have bad credentials AND you've pushed an "update this repository" message into the queue, the loop above this level ends up resetting the timer every time we go through it, so the daemon spins in a loop failing forever.
Test Plan:
- Created a repo with bad credentials.
- Clicekd "updated now" to queue an update message.
- Saw daemon run in a loop.
- Applied patch, no loop.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7106
Differential Revision: https://secure.phabricator.com/D11795
Summary: Ref T2783. This cleans up some more of the direct VCS access calls. If the repository is local, this boils down to an in-process call. If not, it uses Conduit to make an intracluster request.
Test Plan: Used `reparse.php --message <commit> --trace` to observe cluster request.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2783
Differential Revision: https://secure.phabricator.com/D11253
Summary: I think this is safe to remove now.
Test Plan: WIP
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11717
Summary: Adds core and apps grouping to configuration options, makes it somewhat easier to browse config options.
Test Plan: Set each option, review list. Breakdown is nearly 50/50 apps/core.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11722
Summary: Fixes T7118. This does the basic "filter the list" thing, though it ends up being a little manual since I guess this hasn't come up before? There is also potential weird behavior if the user was using an app and lost access to it - they will have nothing selected on edit - but I think this is actually correct behavior in this circumstance.
Test Plan:
used a user who couldn't get access to the "quick create" apps and noted that the dropdown list on dashboard panel create was missing the expected engines
ran `arc unit --everything` to verify abstract method implemented everywhere
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7118
Differential Revision: https://secure.phabricator.com/D11687
Summary: Ref T7094#94295.
Test Plan: noted the absence of the TODO comment in the diff
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7094
Differential Revision: https://secure.phabricator.com/D11656
Summary: Ref T7094. I guess theoretically someone could be making a commit and have just lost access to the revision and thus this could link this commit to that revision, but this all seems far fetched an weird? We also don't necessarily have the commit author's true identity since commit parsing can be a little funky to begin with. Anyhoo, functionally, this makes things no worse, but I am removing the TODO that would make us look at this in a fun way.
Test Plan: `bin/repository reparse --owners rXvalidhash` and it worked
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7094
Differential Revision: https://secure.phabricator.com/D11654
Summary: Ref T7094. This makes the underlying class take a $user parameter, and then the worker just hands it an omnipotent user. Said underyling class is the benefactor of a small re-factor, dropping one query per-use, though the single query that now remains is policy-based so maybe its a wash or even worse. Still, gotta love one less query.
Test Plan:
a little tricky to test so some extra thought instead
basic acceptance test with `bin/repository reparse --change rValidHashHere` -- it worked!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7094
Differential Revision: https://secure.phabricator.com/D11653
Summary: Ref T7094. This loadRepository() method bypassed policy unnecessarily. kill it.
Test Plan: basically un-tested since arcanist projects are deprecated and the main callsites were in releeph. conduit end point still works though!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7094
Differential Revision: https://secure.phabricator.com/D11586
Summary: This sets an icon for each config, makes it easier to scan.
Test Plan:
Reload Config page, see all new icons
{F281089}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11619
Summary:
Fixes T7019. In a cluster environment, pushes currently fail because the commit hook can't identify the instance.
For web processes, the hostname identifies the instance -- but we don't have a hostname in the hook.
For CLI processes, the environment identifies the instance -- but we don't have an environment in the hook under SVN.
Promote the instance identifier into the upstream and pack/unpack it explicitly for hooks. This is probably not useful for anyone but us, but the amount of special-purpose code we're introducing is very small.
I poked at trying to do this in a more general way, but:
- We MUST know this BEFORE we run code, so the normal subclassing stuff is useless.
- I couldn't come up with any other parameter which might ever be useful to pass in.
Test Plan: Used `git push` to push code through proxied HTTP, got a clean push.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7019
Differential Revision: https://secure.phabricator.com/D11495
Summary:
Ref T7019. Ref T7034. In both proxying cases, we want to proxy the request but can not do so over Conduit.
Split the URI resolution apart from Conduit client construction so we can just pull an SSH or HTTP/S URI out of the repository without getting an entire Conduit client.
Test Plan: Browsed around a service-hosted repository. This diff has no behavioral changes.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7034, T7019
Differential Revision: https://secure.phabricator.com/D11491
Summary: Select a similar or better FontAwesome icon to represent each application
Test Plan: Visual inspection
Reviewers: epriestley, btrahan
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11489
Summary:
Ref T2783. I think this served two purposes:
- Improving performance in cases where we "know" a repository is local.
- Preventing loops.
It is now obsolete:
- After D11476, refs can almost always resolve on a fast path.
- As T2783 moves forward, we can usually no longer know when a repository is local without actually looking it up -- almost everything is allowed to run anywhere.
- The cluster behavior in D11475 now prevents loops.
Test Plan: `grep`, browsed around. This didn't really do much of anything anymore.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2783
Differential Revision: https://secure.phabricator.com/D11477
Summary:
Fixes T7020. When an external user makes a Conduit request to Diffusion but the repository isn't hosted locally, we need to proxy it.
This also adds a guard layer to prevent requests from getting infinitely proxied inside the cluster.
In "trivial" configurations (where the repository is a service repository, but the service is on the local device) I'm making us always proxy anyway. This basically makes it reasonable to test this stuff (otherwise you'd have to set up two different installs) and this configuration doesn't make much sense in real life (if you're using multiple machines, making one a dedicating daemons+repo box is almost certainly the most reasonable configuration, even for a cluster size of 2).
Test Plan:
- With a service-hosted repository, made Diffusion conduit calls and browsed the UI. Verified requests got proxied once, then resovled.
- With a non-service repository, made Diffusion conduit calls and browsed UI. Verified requests were handled in-process immediately.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7020
Differential Revision: https://secure.phabricator.com/D11475
Summary: Ref T7020. I need this elsewhere, and it's relatively internal anyway.
Test Plan: Browsed around my local, cluster-configured install and saw everything working fine.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7020
Differential Revision: https://secure.phabricator.com/D11474
Summary: Fixes T7021. When I moved around all the timeline stuff I guess I didn't find this "corner" case, which is wildly common in the post-commit review workflow that we don't use.
Test Plan: pre-patch I could reproduce the issue and post patch I could not. The reproduction case is to have a commit with inline comments and then enough subsequent comments to have a "show older" UI. clicking "show older" now works!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7021
Differential Revision: https://secure.phabricator.com/D11479
Summary: Ref T6822.
Test Plan: `grep`. This method is only called from within `PhutilArgumentWorkflow::__construct`.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11415
Summary: Ref T6822. This method is only called from `PhutilDaemon::execute()` and can be made `protected`.
Test Plan: See D11404.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11405
Summary: Ref T6822. This method is only called from within the `PhabricatorWorker::executeTask()` and `PhabricatorWorker::scheduleTask()` methods.
Test Plan: `grep`ped for `->doWork`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11406
Summary: Fixes T6922. We should allow the commit pipeline to continue on certain types of exceptions, including `PhabricatorApplicationTransactionNoEffectException`.
Test Plan:
**Before**
```lang=bash
> ./bin/repository reparse --herald rP2660b944bed4e4dde3e66303656b1d96d8b03e9b
[2015-01-10 09:38:06] EXCEPTION: (PhabricatorApplicationTransactionNoEffectException) Transactions have no effect:
- Edges already exist; transaction has no effect. at [<phabricator>/src/applications/transactions/editor/PhabricatorApplicationTransactionEditor.php:1635]
#0 PhabricatorApplicationTransactionEditor::filterTransactions(PhabricatorRepositoryCommit, array) called at [<phabricator>/src/applications/transactions/editor/PhabricatorApplicationTransactionEditor.php:649]
#1 PhabricatorApplicationTransactionEditor::applyTransactions(PhabricatorRepositoryCommit, array) called at [<phabricator>/src/applications/repository/worker/PhabricatorRepositoryCommitHeraldWorker.php:91]
#2 PhabricatorRepositoryCommitHeraldWorker::parseCommit(PhabricatorRepository, PhabricatorRepositoryCommit) called at [<phabricator>/src/applications/repository/worker/PhabricatorRepositoryCommitParserWorker.php:44]
#3 PhabricatorRepositoryCommitParserWorker::doWork() called at [<phabricator>/src/infrastructure/daemon/workers/PhabricatorWorker.php:91]
#4 PhabricatorWorker::executeTask() called at [<phabricator>/src/applications/repository/management/PhabricatorRepositoryManagementReparseWorkflow.php:297]
#5 PhabricatorRepositoryManagementReparseWorkflow::execute(PhutilArgumentParser) called at [<phutil>/src/parser/argument/PhutilArgumentParser.php:396]
#6 PhutilArgumentParser::parseWorkflowsFull(array) called at [<phutil>/src/parser/argument/PhutilArgumentParser.php:292]
#7 PhutilArgumentParser::parseWorkflows(array) called at [<phabricator>/scripts/repository/manage_repositories.php:22]
```
**After**
```lang=bash
> ./bin/repository reparse --herald rP2660b944bed4e4dde3e66303656b1d96d8b03e9b
Done.
```
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6922
Differential Revision: https://secure.phabricator.com/D11304
Summary: Ref T6822.
Test Plan: Visual inspection. These methods are only called from within the `PhabricatorApplicationSearchEngine` class.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11242
Summary: Ref T6822.
Test Plan: Visual inspection. This method is only called from within the `PhabricatorRepositoryCommitParserWorker` class.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11248
Summary:
Fixes T5966. Accomplishes a few things
- see title
- adds a force-autoclose flag and the plumbing for it
- removes references to some HarborMaster thing that used to key off commits and seems long dead, but forgotten :/
Test Plan:
ran a few commands. These first three had great success:
`./repository reparse --all FIRSTREPO --message --change --herald --owners`
`./repository reparse --all FIRSTREPO --message --change --herald --owners --min-date yesterday`
`./repository reparse --all FIRSTREPO --message --change --herald --owners --min-date yesterday --force-autoclose`
...and these next two showed me some errors as expected:
`./repository reparse --all FIRSTREPO --message --change --herald --owners --min-date garbagedata`
`./repository reparse --all GARBAGEREPO --message --change --herald --owners`
Also, made a diff in a repository with autoclose disabled and commited the diff. Later, reparse the diff with force-autoclose. Verified the diff closed and that the reason "why" had the proper message text.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: joshuaspence, epriestley, Korvin
Maniphest Tasks: T5966
Differential Revision: https://secure.phabricator.com/D10492
Summary: When updating the status of a task via commit, transaction should show responsible commit and status update if it was changed.
Test Plan: Push a commit "Fixes Txx", transaction should include status update and commit number.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6637
Differential Revision: https://secure.phabricator.com/D11230
Summary: Use `PhabricatorAuditEditor` instead of `PhabricatorEdgeEditor` when writing reverts edges. This ensures that a transaction is created in addition to the edge.
Test Plan: Reverted a commit and pushed to remote. Saw a row created in `phabricator_audit.audit_transaction_comment`. Interestingly, I can't actually see the transaction at http://phabricator.local/r${CALLSIGN}${REVERTED_COMMIT_HASH}.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11212
Summary: Fixes T6608, though I'll also clean up the comment for PhutilStringTruncator in another diff. If I understand correctly, before T1191, MySQL column length was by character count and post T1191 its by byte count. Ergo, most of these changes are going from codepoint -> bytes. See test plan for complete list of what was and was not done.
Test Plan:
Thought very carefully about each callsite and made changes as appropos. "Display" means the string is clearly used for display-only purposes and correctly uses "glyph" already.
grep -rn PhutilUTF8StringTruncator *
applications/calendar/query/PhabricatorCalendarEventSearchEngine.php:217: ->addAttribute(id(new PhutilUTF8StringTruncator()) -- display
applications/chatlog/controller/PhabricatorChatLogChannelLogController.php:111: $author = id(new PhutilUTF8StringTruncator()) -- display
applications/conduit/method/ConduitConnectConduitAPIMethod.php:62: $client_description = id(new PhutilUTF8StringTruncator()) -- was codepoint, changed to bytes
applications/conpherence/view/ConpherenceFileWidgetView.php:22: ->setFileName(id(new PhutilUTF8StringTruncator()) -- display
applications/differential/controller/DifferentialDiffViewController.php:65: id(new PhutilUTF8StringTruncator()) -- display
applications/differential/event/DifferentialHovercardEventListener.php:69: id(new PhutilUTF8StringTruncator()) -- display
applications/differential/parser/DifferentialCommitMessageParser.php:144: $short = id(new PhutilUTF8StringTruncator()) -- was glyphs, made to bytes
applications/differential/view/DifferentialLocalCommitsView.php:80: $summary = id(new PhutilUTF8StringTruncator()) -- display
applications/diffusion/controller/DiffusionBrowseFileController.php:686: id(new PhutilUTF8StringTruncator()) -- display
applications/feed/story/PhabricatorFeedStory.php:392: $text = id(new PhutilUTF8StringTruncator()) -- display, unless people are saving the results of renderSummary() somewhere...
applications/harbormaster/storage/build/HarbormasterBuild.php:216: $log_source = id(new PhutilUTF8StringTruncator()) -- was codepoints now bytes
applications/herald/storage/transcript/HeraldObjectTranscript.php:55: // NOTE: PhutilUTF8StringTruncator has huge runtime for giant strings. -- not applicable
applications/maniphest/export/ManiphestExcelDefaultFormat.php:107: id(new PhutilUTF8StringTruncator()) -- bytes
applications/metamta/storage/PhabricatorMetaMTAMail.php:587: $body = id(new PhutilUTF8StringTruncator()) -- bytes
applications/people/event/PhabricatorPeopleHovercardEventListener.php:62: id(new PhutilUTF8StringTruncator()) -- display
applications/phame/conduit/PhameCreatePostConduitAPIMethod.php:93: id(new PhutilUTF8StringTruncator()) -- was codepoints, now bytes
applications/pholio/storage/PholioTransaction.php:300: id(new PhutilUTF8StringTruncator()) -- display
applications/phortune/provider/PhortuneBalancedPaymentProvider.php:147: $charge_as = id(new PhutilUTF8StringTruncator()) -- bytes
applications/ponder/storage/PonderAnswerTransaction.php:86: id(new PhutilUTF8StringTruncator()) -- display
applications/ponder/storage/PonderQuestionTransaction.php:267: id(new PhutilUTF8StringTruncator()) -- display
applications/ponder/storage/PonderQuestionTransaction.php:276: id(new PhutilUTF8StringTruncator()) -- display
applications/repository/storage/PhabricatorRepositoryCommitData.php:43: $summary = id(new PhutilUTF8StringTruncator()) -- was codepoints, now bytes
applications/repository/worker/commitmessageparser/PhabricatorRepositoryCommitMessageParserWorker.php:20: $data->setAuthorName(id(new PhutilUTF8StringTruncator()) -- was codepoints, now bytes
applications/slowvote/query/PhabricatorSlowvoteSearchEngine.php:158: $item->addAttribute(id(new PhutilUTF8StringTruncator()) -- display
infrastructure/daemon/workers/query/PhabricatorWorkerLeaseQuery.php:317: $host = id(new PhutilUTF8StringTruncator()) -- bytes
view/form/control/AphrontFormPolicyControl.php:61: $policy_short_name = id(new PhutilUTF8StringTruncator()) -- glyphs, probably display only
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6608
Differential Revision: https://secure.phabricator.com/D11219
Summary:
Ref T1751. When a commit reverts another commit:
- Add an edge linking them;
- Show the edge in Diffusion.
Next steps are:
- If the reverted commit is associated with a Differential revision, leave a comment;
- Also leave a comment on the commit (no API yet);
- Also trigger an audit by the original commit's author.
Test Plan: Used `scripts/repository/reparse.php --message ...` to parse commits with revert language. Verified they appear correctly in Diffusion, and update Differential.
Reviewers: btrahan, epriestley
Reviewed By: btrahan, epriestley
Subscribers: Korvin, epriestley, cburroughs, joshuaspence, sascha-egerer, aran
Maniphest Tasks: T4896, T1751
Differential Revision: https://secure.phabricator.com/D5846
Summary: Modernize remaining edges to subclass `PhabricatorEdgeType`. Largely based on D11045.
Test Plan: Browsed around and performed various actions include subscribing, unsubscribing and watching.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11116
Summary:
Ref T2783.
This updates PhabricatorRepositoryManagementLookupUsersWorkflow to use ConduitCall to retrieve information about the commit.
Test Plan:
Ran `bin/repository lookup-users rTESTe9683b64d3283f0b2d355fdbf231bc918b5ac0ab --trace` and saw the information returned (by making a request to `diffusion.querycommits` as the omnipotent user, signed with the device key).
Mucked with `cluster.addresses` and saw requests rejected.
Reviewers: hach-que, btrahan
Reviewed By: btrahan
Subscribers: Krenair, epriestley, Korvin
Maniphest Tasks: T2783
Differential Revision: https://secure.phabricator.com/D10403
Summary:
Ref T4245 Make repo callsigns optional
This is far from done and still very ugly. I'm just submitting it to check if i'm solving this in the right places.
Right now there's three places with duplicate code and building the identifierMap in the CommitQuery is very ugly.
If we only want to support this in the user frontend then i could hack it into the Markup rule itself and not touch the CommitQuery. Even uglier but more limited in scope...
Generally this approach will need a lot of "check this first and then try the other" in a few places.
I could move the Repository queries into a specialised PhabricatorRepositoryQuery method (withCallsignOrID) but i'm not sure about that.
Test Plan:
- phid.lookup works with R1 and rTEST (which is the same repo)
- R1 and rTEST euqally work in remarkup (tested in comments).
- Reviewed the following syntax also all works:
rTEST
rTESTd773137a7cb9
rTEST:d773137a7cb9
R1
R1:d773137a7cb9
d773137a7cb9
{rTEST}
{rTESTd773137a7cb9}
{rTEST:d773137a7cb9}
{R1}
{R1:d773137a7cb9}
{d773137a7cb9}
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D11050
Summary: Modernize Differential edges to subclass `PhabricatorEdgeType`. Largely based on D11045.
Test Plan: From previous experience, these changes are fairly trivial and safe. I poked around a little to make sure things looked reasonably okay.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, Krenair, epriestley
Differential Revision: https://secure.phabricator.com/D11074
Summary: Fix a few minor lint issues.
Test Plan: Ran `arc lint`.
Reviewers: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11059
Summary: I don't have `hg` yet on my new laptop; we should just skip tests if the user is missing binaries. Add a convenience method to do this.
Test Plan: Got clean `arc unit --everything` with no `hg` installed.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11051
Summary:
Ref T2783. When creating a new repository, test for cluster services. If cluster services are available, allocate on a random open service.
Show the service that repositories are allocated on.
Test Plan: Created a new repository, saw it allocate onto an available cluster service.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2783
Differential Revision: https://secure.phabricator.com/D11003
Summary: Ref T5245. This is some of the associated cleanup there.
Test Plan:
foreach ManiphestTaskQuery site, I made the change (or not) and tested as follows:
=== Call sites where added needProjectPHIDs ===
- PhabricatorHomeMainController - loaded the home page
- ManiphestBatchEditController - batch edited some tasks (added a project)
- ManiphestConduitAPIMethod - tested implicitly when tested ManiphestUpdateConduitAPIMethod
- ManiphestInfoConduitAPIMethod - used the method via conduit console with input id : 1
- ManiphestQueryConduitAPIMethod - used the method via conduit console with input ids : [1, 2]
- ManiphestUpdateConduitAPIMethod - used the method via conduit with input id : 1 and comment : “asdasds"
- ManiphestReportController - viewed “By User” and “By Project”
- ManiphestSubpriorityController - changed the priority of a task via a drag on manphest home
- ManiphestTaskMailReceiver - updated Task 1 via bin/mail receive-test with a comment that is the README
- ManiphestTaskSearchEngine - loaded Manifest home page
- ManiphestTaskEditController - edited a task
- ManiphestTransactionEditor - closed a blocking task
- ManiphestTransactionSaveController - commented on a task
- PhabricatorProjectProfileController - viewed project with id of 1 that has a few tasks in it
- PhabricatorSearchAttachController - merged tasks together
- DifferentialTransactionEditor - submit a diff that references a task; commit the diff (thus closing the diff) and the task gets updated
- PhabricatorRepositoryCommitMessageParserWorker - submit a diff that references a task; commit the diff (thus closing the diff) and the task gets updated
=== Calls sites where *did not* add needProjectPHIDs (they do not appear in this revision) ===
- PhabricatorManiphestApplication - loaded the home page
- ManiphestGetTaskTransactionsConduitAPIMethod - used the method via conduit console with input ids : [1, 2] ManiphestTaskDetailController - viewed a task with and without associated projects; finished workflow creating a task with a parent
- ManiphestTransactionPreviewController - verified transaction preview showed up properly
- PhabricatorProjectBoardViewController - viewed a board
- PhabricatorProjectMoveController - moved a task around
- ManiphestRemarkupRule - made a task reference like {T123}
- ManiphestTaskQuery - executed a custom query for all tasks with page size of 2 and paginated through some tasks
- ManiphestTaskPHIDType - nothing random seems broken? =D
=== Call sites where had to do something funky ===
- ManiphestHovercardEventListener - loaded hover cards from task mentions
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T5245
Differential Revision: https://secure.phabricator.com/D11004
Summary:
Ref T2783. This is primarily exploratory and just figuring out what we're blocked on:
- Allow a Repository to be bound to a Service. The Service may eventually define multiple read/write nodes, etc.
- There's no UI to do this binding yet, you have to touch the database manually.
- If a repository is bound to a Service, effect Conduit calls via calls to the remote service instead of executing them in-process.
- These don't actually work yet since there's no authentication (see T5955).
Test Plan:
- Made a nice Service with a nice Binding to a nice Interface on a nice Device.
- Force-associated a repository with the service using a raw MySQL query.
- Saw Phabricator try to make a remote call to the service (on localhost) and fail because of missing auth stuff.
- Also ran `almanac.queryservices`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2783
Differential Revision: https://secure.phabricator.com/D10982
Summary: Fixes T6693.
Test Plan:
Made a bunch of comments on a diff with differential, being sure to leave inlines here and there. This reproduced the issue in T6693. With this patch this issue no longer reproduces!
Successfully "showed older changes" in Maniphest too.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6693
Differential Revision: https://secure.phabricator.com/D10931
Summary:
Ref T4712. Specifically...
- Differential
- needed getApplicationTransactionViewObject() implemented
- Audit
- needed getApplicationTransactionViewObject() implemented
- Repository
- one object needed PhabricatorApplicationTransactionInterface implemented
- setShouldTerminate(true)
- Ponder
- BONUS BUG FIX - leaving a comment on an answer had a bad redirect URI
- both PonderQuestion and PonderAnswer needed PhabricatorApplicationTransactionInterface implemented
- setShouldTerminate(true) on both "history" controllers
- left a "TODO" on buildAnswers on the question view controller, which is non-standard and should be re-written eventually
- Phortune
- BONUS BUG FIX - fix new user "createNewAccount" code to not fatal
- PhortuneAccount, PhortuneMerchant, and PhortuneCart needed PhabricatorApplicationTransactionInterface implemented
- setShouldTerminate(true) on Account view, merchant view, and cart view controller
- Fund
- Legalpad
- Nuance
- NuanceSource needed PhabricatorApplicationTransactionInterface implemented
- Releeph (this product is kind of a mess...)
- HACKQUEST - had to manually create an arcanist project to even be able to make a "product" and get started...!
- BONUS BUG FIX - make sure to "setName" on product edit
- ReleephProject (should be ReleepProduct...?), ReleephBranch, and ReleepRequest needed PhabricatorApplicationTransactionInterface implemented
- Harbormaster
- HarbormasterBuildable, HarbormasterBuild, HarbormasterBuildPlan, and HarbormasterBuildStep all needed PhabricatorApplicationTransactionInterface implemented
- setShouldTerminate(true) all over the place
Test Plan: foreach application, viewed the timeline(s) and made sure they still rendered
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T4712
Differential Revision: https://secure.phabricator.com/D10925
Summary: Fixes T3189. Now if you say #projects in a commit message they will associate nicely with the commit. Also we record transactions about all this project editing fun.
Test Plan: tested migration by associating some projects with commits and verifying they still showed up post migration. tested adding / removing projects by doing so from the UI, noting transactions written nicely as well
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Projects: #projects
Maniphest Tasks: T3189
Differential Revision: https://secure.phabricator.com/D10877
Summary: Fixes T6152, T6237. This introduces a viewPolicy column to the DifferentialDiff, and re-jiggers the DifferentialDiff policy implementation such that things behave as before once associated with a revision, else use the DifferentialDiff policy column value.
Test Plan: made a diff with a non-standard view policy and noted that policy was still selected in the revision step. arc lint.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6237, T6152
Differential Revision: https://secure.phabricator.com/D10875
Summary: Fixes T4946. Theoretically.
Test Plan:
iiam
also unit tests.
also
```
cd /var/repo/X
git remote remove origin # simulates origin-missing clone under 1.7.1
cd /path/to/phabricator
./bin/repository pull X
```
and observed no errors
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T4946, T5938
Differential Revision: https://secure.phabricator.com/D10855
Summary: Fixes T1768. This is mostly a data cleanliness issue as duplicate rows don't really do anything, but let's clear it up now.
Test Plan: made some duplicate rows by adding the same auditor multiple times. ran ./bin/storage upgrade and it worked perfectly!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T1768
Differential Revision: https://secure.phabricator.com/D10849
Summary: Fixes T6343. Grepped for all callsites and added addLinkSection where needed.
Test Plan: Tested Differential, Maniphest, Conpherence, Ponder and Macro. Inspect HTML mail for anchor tags. Inspect text mails for non-disruption.
Reviewers: epriestley, btrahan
Reviewed By: btrahan
Subscribers: talshiri, Korvin, epriestley
Maniphest Tasks: T6343
Differential Revision: https://secure.phabricator.com/D10762
Summary: Fixes T6419. Also, there was a question on T6419 about whether this was in a try catch block and it is... Its not clear to me what happens in the "timeout" case though?
Test Plan: looks nice
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6419
Differential Revision: https://secure.phabricator.com/D10755
Summary: ...also truncate authorName to 255 so that we don't get database errors. Ref T6350.
Test Plan: see T6350 - mostly doing it live - but I did sanity check and commit something and it worked!
Reviewers: epriestley, chad
Reviewed By: chad
Subscribers: Korvin, epriestley
Maniphest Tasks: T6350
Differential Revision: https://secure.phabricator.com/D10734
Summary: Fixes T6336. Turns out that the function to update the import status updates that database and doesn't update the object. If the object doesn't get the pertinent update AND there's a herald rule that runs, then the object is later re-saved without ever getting the update flag.
Test Plan: logic in the ole sandbox and going to push it to prod and run re-parse on impacted commits
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley, chad
Maniphest Tasks: T6336
Differential Revision: https://secure.phabricator.com/D10723
Summary:
Fixes T4896, T6293.
Do most of the work in the editor, but pull the raw patch in the daemon and set that on the editor. This is somewhat of a pre-optimization but it was easy enough to do and makes sense to me.
Test Plan:
made a commit and saw it get parsed.
made a commit with "Auditors: foo" field and saw audit made for foo
turned on inline patch and attach patch and saw the patches
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6293, T4896
Differential Revision: https://secure.phabricator.com/D10705
Summary:
I am not sure how valuable this is *as is* - I think it needs different explanations for what happened in mercurial or subversion? I do not know what those explanations are.
Made an error in D10485 - the $hashes that were saved is an array of objects, so it ends up turning into garbage via the wonders of serialization and de-serialization. Fix that by explicitly saving the tree hash.
I would like to make this work for the other VCS types we support, add the "undo / nope" button and call it fixed.
Ref T3686.
Test Plan: clicked "explan why" and saw why
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5693, T3686
Differential Revision: https://secure.phabricator.com/D10489
Summary:
Ref T1191. Now that the whole database is covered, we don't need to do as much work to build expected schemata. Doing them database-by-database was helpful in converting, but is just reudndant work now.
Instead of requiring every application to build its Lisk objects, just build all Lisk objects.
I removed `harbormaster.lisk_counter` because it is unused.
It would be nice to autogenerate edge schemata, too, but that's a little trickier.
Test Plan: Database setup issues are all green.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, hach-que
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10620
Summary:
Ref T1191. When changing the column type of an AUTO_INCREMENT column, we currently may lose the autoincrement attribute.
Instead, support it. This is a bit messy because AUTO_INCREMENT columns interact with PRIMARY KEY columns (tables may only have one AUTO_INCREMENT column, and it must be a primary key). We need to migrate in more phases to avoid this issue.
Introduce new `auto` and `auto64` types to represent autoincrement IDs.
Test Plan:
- Saw autoincrement show up correctly in web UI.
- Fixed an autoincrement issue on the XHProf storage table with `bin/storage adjust` safely.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10607
Summary:
Ref T1191. For most text columns, we either don't care if "a" and "A" are the same, or we expect them to be different (for example: keys, domains, secrets, etc). Default text columns to the `_bin` collation so they are compared by strict character value. This is safer in cases where we aren't sure.
For some text columns, we allow the user to sort by the column in the UI (like Maniphest task titles) or we do care that "A" and "a" are the same (for example: project names). Introduce a new class of virtual data types, the "sort..." types, to cover these columns. These are like the "text..." types but use sorting collations which treat "A" and "a" the same.
Test Plan:
- Made an effort to identify all columns where the UI relies on database collation.
- Ran `bin/storage adjust` and cleared all warnings.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: beng, epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10602
Summary:
Ref T1191. Ref T6203. While generating expected schemata, I ran into these columns which seem to have sketchy nullability.
- Mark most of them for later resolution (T6203). They work fine today and don't need to block T1191. Changing them can break the application, so we can't autofix them.
- Forgive a couple of them that are sort-of reasonable or going to get wiped out.
Test Plan: Saw 94 remaining warnings.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: hach-que, epriestley
Maniphest Tasks: T1191, T6203
Differential Revision: https://secure.phabricator.com/D10593
Summary: Fixes T5536. Some bonus pht in there.
Test Plan: made a diff hovered over the stars and saw my new text.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5536
Differential Revision: https://secure.phabricator.com/D10487
Summary:
Implements a new transaction - still TYPE_ACTION - but using a new DifferentialAction::ACTION_COMMIT_CLOSE. Augment rendering as necessary to display this new transaction. Saves enough information so T3686 is possible but stops short of implementing a popup to display this information. Fixes T5875. Ref T3686.
One small display oddity - this new transaction now renders at the top of the transaction group whereas when it was a comment it was on the bottom. I think this is basically okay but if not how fix? (Playing with the "strength" of these actions will mess up the email too?)
Test Plan: made a diff X that fixed task Y. committed. checked diff X, task Y, and the commit pages for proper transactions and all looked good.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T3686, T5875
Differential Revision: https://secure.phabricator.com/D10485
Summary: Fixes T4036. Now if you say something on diff X like "This reminds me of Tx and Dy and commitHashFoo and Px." each of those objects gets a little visible transaction that the mention occurred. No feed, email, or notifications.
Test Plan: made a comment like above and verified transactions. also submitted a diff that "Fixes Tx" and Tx did not get the transaction as expected.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: joshuaspence, epriestley, Korvin
Maniphest Tasks: T4036
Differential Revision: https://secure.phabricator.com/D10451
Summary:
Ref T2783. Fixes T6039.
- Provide `authorPHID` and `committerPHID` to resolve T6039.
- In message parser, store author/email strings.
- In cached results, emit author/email strings.
Test Plan: Called method with and without bypassCache. Used `reparse.php` to repopulate data on an old commit.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2783, T6039
Differential Revision: https://secure.phabricator.com/D10424
Summary: make it use the value of the revision before any post-commit magic has occurred. Fixes T4754
Test Plan: made a herald rule that said "if revision exists, and revision accept does not exists, block push". tried to push a commit that had a revision that wasn't accepted and I was blocked.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: mbishopim3, epriestley, Korvin
Maniphest Tasks: T4754, T4574
Differential Revision: https://secure.phabricator.com/D10393
Summary: Ref T3307. Only one I thought was tricky was Excel; I went with bytes there like it was email.
Test Plan: played around on a few endpoints but mostly thought carefully
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T3307
Differential Revision: https://secure.phabricator.com/D10392
Summary: Fixes T2564. See screenshot.
Test Plan:
{F194796}
- Made a bunch of valid and invalid adjustments here and verified that the branches table showed autoclose state and branches consistent with the settings.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2564
Differential Revision: https://secure.phabricator.com/D10349
Summary:
Fixes T4767. I believe 80% of this was actually caused by the author issue fixed in T5771, but this should help make the other 20% debuggable.
- Record why we didn't autoclose a commit when we process it.
- Show branch autoclose status in the main branch table.
- Show commit autoclose status on the edit screen.
- Add documentation about how to find these statuses and what they mean.
Test Plan:
- Read documentation.
- Viewed branches and hovered over the various states.
- Viewed commits in various states and checked the "Autoclose?" field.
- Pushed some commits and saw autoclose activate.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4767
Differential Revision: https://secure.phabricator.com/D10348
Summary:
Fixes T5926. Fixes T5830. Ref T4767. Users currently sometimes have a hard time understanding repository update frequencies. This is compounded by aggressive backoff and incorrect backoff while importing repositories.
- Don't back off while importing repositories. This prevents us from hanging at 99.99% for inactive repositories while waiting for the next update.
- Back off less aggressively in general, and even more gradually during the first 3 days. This should make behavior around weekends better.
- Show update frequency in the UI.
- Provide an explicit "update now" button to call `diffusion.looksoon` in a more user-friendly way.
- Document how backoff policies work and how to adjust behavior.
Test Plan:
- Ran `bin/phd debug pulllocal` and verified backoff worked correctly from debugging output.
- Clicked "Update Now" to get a hint, reloaded page to see it update.
- Read documentation.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4767, T5830, T5926
Differential Revision: https://secure.phabricator.com/D10323
Summary:
Ref T5861. Currently, mail tags are hard-coded; move them into applications. Each Editor defines its own tags.
This has zero impact on the UI or behavior.
Test Plan:
- Checked/unchecked some options, saved form.
- Swapped back to `master` and saw exactly the same values.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5861
Differential Revision: https://secure.phabricator.com/D10238
Summary:
Fixes T5839. If a repository has been force pushed and garbage collected, we might have a ref cursor in the database which still points at the old commit (which no longer exists).
We'll then run a command like `git log <new hash> --not <old hash>` to figure out which commits are newly pushed, and this will bomb out because `<old hash>` is invalid.
Instead, validate all the `<old hash>` values before we try to make use of them.
Test Plan:
- Forced a repository into a bad state by mucking with the datbase, generating a reproducible failure similar to the one in T5839.
- Applied patch.
- `bin/repository update <callsign> --trace` filtered the bad commit and put the repository into the right state.
- Saw new commits recognized correctly.
- Ran `bin/repository update <callsign>` for a Mercurial and SVN repo as a sanity check.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5839
Differential Revision: https://secure.phabricator.com/D10226
Summary:
Fixes T5855. Adds a `--graceful N` flag to `phd stop` and `phd restart`.
`phd` will send SIGINT, wait `N` seconds, SIGTERM, wait 15 seconds, and SIGKILL. By default, `N` is 15.
Test Plan:
- Ran `bin/phd debug ...` and used `^C` to interrupt daemons. Saw graceful shutdown behavior, and abrupt termination on multiple `^C`.
- Ran `bin/phd start`, `bin/phd stop` and `bin/phd restart` with `--graceful` set to various things, notably `0`. Saw graceful shutdowns on the CLI and in the web UI. With `0`, abrupt shutdowns.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
Subscribers: epriestley
Maniphest Tasks: T5855
Differential Revision: https://secure.phabricator.com/D10228
Summary:
- Fixes T5851. Currently, if a commit has `Fixes T123`, we generate an email with just that before generating the commit email. Don't send/publish transactions about a commit before it imports (this is a tiny bit hacky, but well-contained and I don't think it causes any problems).
- Fixes T4864. Currently, we try to parse Differential information even if Differential is not installed. Instead, do this only if Differential is installed.
- Fixes T5771. Currently, if we can't figure out who the committer/author of a commit is, we don't publish a `Fixes T123` transaction. Instead, fall back to acting as "Diffusion" if we can't find a better actor. Most of this diff expands the role of application actors. The existing application actors (Herald and Harbormaster) seem to be working well.
Test Plan:
- Pushed a commit with `Fixes T123` and verified it did not generate email directly. (The task half of the transaction still does, correctly.)
- Uninstalled Differential and pushed a commit, got a clean import instead of an exception.
- Commented out author/committer PHIDs and pushed stuff, saw a "Diffusion" actor.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5771, T4864, T5851
Differential Revision: https://secure.phabricator.com/D10221
Summary:
Ref T4896. Now that we have a transaction editor, we can delete a giant block of hacks.
I believe this also resolves the commit/task attachment issues @joshuaspence and @mbishopim3 mentioned.
Test Plan: Attached and detached commits and tasks.
Reviewers: btrahan, joshuaspence, mbishopim3
Reviewed By: mbishopim3
Subscribers: mbishopim3, epriestley, joshuaspence
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10138
Summary:
Ref T4896. Currently, subscriptions to commits are stored as auditors with a special "CC" type.
Instead, use normal subscriptions storage, reads and writes.
Test Plan:
- Ran migration and verified data still looked good.
- Viewed commits in UI and saw "subscribers".
- Saw "Automatically Subscribed", clicked Subscribe/Unsubscribe on a non-authored commit, saw subscriptions update.
- Pushed a commit through Herald rules and saw them trigger subscriptions and auditors.
- Used "Add CCs".
- Added CCs with mentions.
Reviewers: btrahan, joshuaspence
Reviewed By: btrahan, joshuaspence
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10103
Summary:
Ref T4896. Depends on D10056. Moves search indexing to standard infrastructure.
Also, fixes a bug where inline comments would not be indexed.
Test Plan: Used `bin/search index ... --trace` to view index construction of a commit, saw all the comments and inlines get indexed.
Reviewers: btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10057
Summary: Ref T4896. Buries all direct access to the table so we can limit the surface area affected by the migration.
Test Plan:
- Grepped for `PhabricatorAuditComment`.
- Grepped for `audit_comment`.
- Viewed a bunch of comments.
- Added a comment.
- Reindexed a commit.
- Searched for unique term in new comment.
Reviewers: btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10019
Summary: Ref T4896. Move all direct accesses to the inline comment table behind a small amount of API to make it easier to migrate the table.
Test Plan:
- Grepped for `PhabricatorAuditInlineComment`.
- Grepped for `audit_inlinecomment`.
- Created a draft comment.
- Previewed a draft comment.
- Reloaded page, still saw draft.
- Viewed standalone, still saw draft.
- Made comment, inline published.
- Added a draft, saw both.
- Edited inline comment.
- Reindexed commit.
- Searched for unique word in published comment, found commit.
- Searched for unique word in draft comment, no results.
Reviewers: btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10016
Summary: Ref T5655. Rename `PhabricatorPHIDType` subclasses for clarity (see discussion in D9839). I'm not too keen on some of the resulting class names, so feel free to suggest alternatives.
Test Plan: Ran unit tests.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin, hach-que
Maniphest Tasks: T5655
Differential Revision: https://secure.phabricator.com/D9986
Summary: Provide an implementation for the `getName` method rather than automagically determining the application name.
Test Plan: Saw reasonable application names in the launcher.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10027
Summary: Ref T5655. Some discussion in D9839. Generally speaking, `Phabricator{$name}Application` is clearer than `PhabricatorApplication{$name}`.
Test Plan:
# Pinned and uninstalled some applications.
# Applied patch and performed migrations.
# Verified that the pinned applications were still pinned and that the uninstalled applications were still uninstalled.
# Performed a sanity check on the database contents.
Reviewers: btrahan, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: hach-que, epriestley, Korvin
Maniphest Tasks: T5655
Differential Revision: https://secure.phabricator.com/D9982
Summary: Instead of implementing the `getTypeConstant` method in all subclasses of `PhabricatorPHIDType`, provide a `final` implementation in the base class which uses reflection. See D9837 for a similar implementation.
Test Plan: Ran `arc unit`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9985
Summary: Ref T5655. The `PhabricatorDestructibleInterface` interface is misspelled as `PhabricatorDestructableInterface`. Fix the spelling mistake.
Test Plan: `grep`. Seeing as this interface is fairly recent, I don't expect that this would cause any widespread breakages.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5655
Differential Revision: https://secure.phabricator.com/D9988
Summary: Ref T5245. Updates the project/object edge to use a modern class definition. Moves further toward real edges.
Test Plan: Added projects to some objects, viewed transactions in transaction record.
Reviewers: chad, btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T5245
Differential Revision: https://secure.phabricator.com/D9849
Summary: Ref T5245. With work elsewhere (notably, D9839) we can remove this TODO and use real transactions.
Test Plan: Pushed a `closes Txxx` commit and got a close + transaction.
Reviewers: chad, btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T5245
Differential Revision: https://secure.phabricator.com/D9848
Summary:
Ref T5245. These were a bad idea.
We no longer need actors for edge edits either, so remove those. Generally, edges have fit into the policy model as pure/low-level infrastructure, and they do not have any policy or capability information in and of themselves.
Test Plan: `grep`
Reviewers: chad, btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T5245
Differential Revision: https://secure.phabricator.com/D9840
Summary: These have been moved into libphutil.
Test Plan: Browsed Phabricator, didn't see a crash.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9907
Summary:
Ref T1493.
- When viewing an invalid branch, show a "there is no such branch" message.
- When viewing an empty repository, show a "this repository is empty" message.
Test Plan:
- Viewed empty, bad branch, and nonempty in Git.
- Viewed empty, bad branch, and nonempty in Mercurial.
- Viewed empty and nonempty in Subversion.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T1493
Differential Revision: https://secure.phabricator.com/D9912
Summary: Ref T4420. Update "projects" source.
Test Plan:
- Edited projects on a Differential revision.
- Edited projects on a commit.
- Edited projects on a repository.
- Edited projects in feed search.
- Edited projects in a Herald rule field.
- Edited projects in a Herald rule action.
- Edited projects in Maniphest batch editor.
- Edited projects on Maniphest task.
- Edited projects in "Associate Projects..." action in Maniphest.
- Edited projects on Maniphest search in "all projects", "any project" and "not projects" fields.
- Edited projects on a Paste.
- Edited projects on a Pholio mock.
- Edited projects on a custom policy rule.
- Edited projects on a Ponder question.
- Edited projects on a Diffusion search query.
- Edited projects on a global search query.
- Edited projects on a slowvote.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4420
Differential Revision: https://secure.phabricator.com/D9884
Summary: Ref T4420. Make this modern.
Test Plan:
- Used typeahead in remarkup comment area to select macro "derpdog".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4420
Differential Revision: https://secure.phabricator.com/D9875
Summary:
Ref T4420.
- Allow tokenizers to accept either a `Datasource` object (new style) or a URI (old style).
- Read URI and placeholder text from object, if available.
- Swap the "repositories" datasource (which seemed like the simplest one) over to the new stuff.
- Tweak/update the repo tokens a little bit.
Test Plan:
- Used tokenizer in Herald, Differential (search), Differential (edit), Push Logs.
- Grepped for other callsites.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4420
Differential Revision: https://secure.phabricator.com/D9874
Summary: Since there's no way to set it, it defaults to an empty value. Make the conduit call set up sane default.
Test Plan: Call method, repo get's built with expected localpath.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9842
Summary: I'm pretty sure that `@group` annotations are useless now... see D9855. Also fixed various other minor issues.
Test Plan: Eye-ball it.
Reviewers: #blessed_reviewers, epriestley, chad
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9859
Summary: Toss the hard-codes and use slim tags.
Test Plan: Scoped out task list.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9748
Summary: Fix for T4990, using export TERM directly in pre receive hook, tested for git
Test Plan:
pushing into repository over ssh will now not cause remote warning
No entry for terminal type "unknown";
using dumb terminal settings.
Tested with git
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Projects: #diffusion, #repositories
Maniphest Tasks: T4990
Differential Revision: https://secure.phabricator.com/D9744
Summary:
Standardizes tag rendering in Maniphest and Maniphest/Diffusion list views.
(This might need some size/spacing tweaks, I tried to make it look reasonable.)
Test Plan: See screenshots.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9741
Summary:
Fixes T5445. Some import tools and other unusual situations can leave repositories with commits that don't have authors. This fails on insert.
Instead, explicitly cast the value to a string.
Test Plan: I didn't build a local repro, but see task/GitHub.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5445
Differential Revision: https://secure.phabricator.com/D9684
Summary: Ref T1049. This moves the declaration of build variables onto HarbormasterBuildableInterface, allowing new classes implementing HarbormasterBuildableInterface to declare their own variables.
Test Plan: Implemented it on another class, saw the build variables appear.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D9618
Summary:
Via HackerOne. There are two attacks here:
- Configuring mirroring to a `file://` URI to place files on disk or overwrite another repository. This is not particularly severe.
- Configuring cloning from a `file://` URI to read repositories you should not have access to. This is more severe.
Historically, repository creation and editing explicitly supported `file://` URIs to deal with use cases where you had something else managing repositories on the same machine. Since there were no permissions, repository management was admin-only, and you couldn't mirror, this was fine.
As we've evolved, this use case is a tiny minority use case and the security implications of `file://` URIs overwhelm the utility it provides. Prevent the use of `file://` URIs. Existing configured repositories won't stop working, you just can't add any new ones.
Also prevent `localPath` from being set via Conduit (see T4039).
Test Plan:
- Tried to create a `file://` repository.
- Tried to create a `file://` mirror.
- Tried to create a `file://` repository via Conduit.
- Created a non-`file://` repository.
- Created a non-`file://` mirror.
- Created a non-`file://` repository via Conduit.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9513
Summary: Ref T4986. Instead of requiring users to know the name of an application search engine class, let them select from a list.
Test Plan:
Created a new panel.
{F165468}
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T4986
Differential Revision: https://secure.phabricator.com/D9500
Summary: Ran `arc lint --apply-patches --everything` over rP, mainly to change double quotes to single quotes where appropriate. These changes also validate that the `ArcanistXHPASTLinter::LINT_DOUBLE_QUOTE` rule is working as expected.
Test Plan: Eyeballed it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9431
Summary: This went smoother than expeced. Makes the rounded Card the default, also tweaked selected state a little.
Test Plan:
Test UIExamples, Maniphest, Home, Differential, Harbormaster, Audit. Everything seems normal
{F163971}
{F163973}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9408
Summary: Ref T4045. Ref T5179. Send all new writes into the modern store.
Test Plan:
- Created a diff.
- Verified it went to the modern store.
- Destroyed a revision, verified hunks were destroyed.
- Also unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4045, T5179
Differential Revision: https://secure.phabricator.com/D9293
Summary:
Ref T4045. Ref T5179. Hunk storage has two major issues:
- It's utf8, but actual diffs are binary.
- It's huge and can't be compressed or archived.
This introduces a second datastore which solves these problems: by recording hunk encoding, supporting compression, and supporting alternate storage. There's no actual compression or storage support yet, but there's space in the table for them.
Since nothing actually uses hunk IDs, it's fine to have these tables exist at the same time and use the same IDs. We can migrate data between the tables gradually without requiring downtime or disrupting installs.
Test Plan:
- There are no writes to the new table yet.
- The only effect this has is making us issue one extra query when looking for hunks.
- Observed the query issue, but everything else continue working fine.
- Created a new diff.
- Ran unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4045, T5179
Differential Revision: https://secure.phabricator.com/D9290
Summary: Ref T5179. Ref T4045. Continue reducing the number of direct hunk loads we perform.
Test Plan: Pushed a closing commit, used `scripts/repository/reparse.php --message ...` to trigger this logic, got a sensible/accurate result.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4045, T5179
Differential Revision: https://secure.phabricator.com/D9288
Summary: Fixes T5255. Currently the `./bin/repository parents` workflow is quite slow. Batching up the SQL operations should make the workflow //seem// much faster.
Test Plan: Not yet tested.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5255
Differential Revision: https://secure.phabricator.com/D9361
Summary: Currently, repositories can be deleted using `./bin/repository delete`. It makes sense to expose this operate to the `./bin/remove` script as well, for consistency.
Test Plan: Deleted a repository with `./bin/remove rTEST`.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9350
Summary: Fixes T5226. It's rare (but possible) for a commit to have the same parent more than once in Git.
Test Plan: Ran `bin/repository parents` on a normal repository.
Reviewers: joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T5226
Differential Revision: https://secure.phabricator.com/D9344
Summary:
This probably needs some tweaks, but the idea is to make it easier to browse and access applications without necessarily needing them to be on the homepage.
Open to feedback.
Test Plan:
(This screenshot merges "Organization", "Communication" and "Core" into a single "Core" group. We can't actually do this yet because it wrecks the homepage.)
{F160052}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5176
Differential Revision: https://secure.phabricator.com/D9297
Summary: Fixes T5195. Currently, the `./bin/repository parents` workflow doesn't respect tracked branches and will attempt to build parents caches for all branches.
Test Plan: For at least one of our repositories, this patch fixes the `Unknown commit` exception. Unfortunately, it doesn't seem to completely solve this problem though, but I suspect that this is due to commits that were overwritten with a `git push --force` or similar.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5195
Differential Revision: https://secure.phabricator.com/D9322
Summary: Point everything at the new canonical URI.
Test Plan: `grep`
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9328
Summary:
Ref T4994. This stuff works:
- You can dump a blob of coverage information into `diffusion.updatecoverage`. This wipes existing coverage information and replaces it.
- It shows up when viewing files.
- It shows up when viewing commits.
This stuff does not work:
- When viewing files, the Javascript hover interaction isn't tied in yet.
- We always show this information, even if you're behind the commit where it was generated.
- You can't do incremental updates.
- There's no aggregation at the file (this file has 90% coverage), diff (the changes in this commit are 90% covered), or directory (the code in this directory has 90% coverage) levels yet.
- This is probably not the final form of the UI, storage, or API, so you should expect occasional changes over time. I've marked the method as "Unstable" for now.
Test Plan:
- Ran `save_lint.php` to check for collateral damage; it worked fine.
- Ran `save_lint.php` on a new branch to check creation.
- Published some fake coverage information.
- Viewed an affected commit.
- Viewed an affected file.
{F151915}
{F151916}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: jhurwitz, epriestley, zeeg
Maniphest Tasks: T5044, T4994
Differential Revision: https://secure.phabricator.com/D9022
Summary: Fixes T3044. We currently don't add these to the index.
Test Plan: Made a unique inline comment on a commit, then searched for it.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T3044
Differential Revision: https://secure.phabricator.com/D9170
Summary: Ref T5058. The use of "enum" is confusing; we mean "choose one of these specific string constants". Make this more clear.
Test Plan: Viewed each call from the web UI.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5058
Differential Revision: https://secure.phabricator.com/D9127
Summary:
Allows you to quickly search for files within a repository. Roughly:
- We build a big tree of everything and ship it to the client.
- The client implements a bunch of Sublime-ish magic to find paths.
Test Plan: {F154007}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley, zeeg
Differential Revision: https://secure.phabricator.com/D9087
Summary: Ref T4986. Move push logs to a View, then have all the stuff that needs to use it use that View.
Test Plan: Viewed push logs and transaction detail in Diffusion. Created a panel.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4986
Differential Revision: https://secure.phabricator.com/D9104
Summary: Ref T2683. This is a small optimization, but it has low complexity: don't rebuild a bucket more than once in the same request, since it will almost always be the same. Bucket rebuilds are pretty cheap, but this saves a few queries.
Test Plan:
- After discovering (but before parsing) a commit, viewed its browse view. Verified that this patch causes us to perform only one bucket rebuild, and therefore reduces the number of queries we issue.
- Parsed the commit and viewed the browse view again, got successful rebuild and then fills from cache.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2683
Differential Revision: https://secure.phabricator.com/D9055
Summary: Ref T2683. Normally not a big deal, but if a readme has some codeblocks missing the cache can slow things down.
Test Plan:
- Verified we hit the cache.
- Verified TOC still works.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5028, T2683
Differential Revision: https://secure.phabricator.com/D9049
Summary:
Ref T2683. At least locally, browse views are now nearly instantaneous, even in Mercurial. We also fall back to what we were doing before if we miss or take too long, so this shouldn't make things very much worse even in extreme cases.
For a local `hg` repo, the time we spend pulling browse stuff has dropped from ~3,000ms to ~20ms. This is probably atypical, but not completely crazy or rigged or anything.
Test Plan: Viewed Git, Subversion and Mercurial repositories and observed dramatically better performance in Git and Mercurial as they took advantage of the cache.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, jhurwitz
Maniphest Tasks: T2683
Differential Revision: https://secure.phabricator.com/D9047
Summary:
Ref T2683. This is a refinement and simplification of D5257. In particular:
- D5257 only cached the commit chain, not path changes. This meant that we had to go issue an awkward query (which was slow on Facebook's install) periodically while reading the cache. This was reasonable locally but killed performance at FB scale. Instead, we can include path information in the cache. It is very rare that this is large except in Subversion, and we do not need to use this cache in Subversion. In other VCSes, the scale of this data is quite small (a handful of bytes per commit on average).
- D5257 required a large, slow offline computation step. This relies on D9044 to populate parent data so we can build the cache online at will, and let it expire with normal LRU/LFU/whatever semantics. We need this parent data for other reasons anyway.
- D5257 separated graph chunks per-repository. This change assumes we'll be able to pull stuff from APC most of the time and that the cost of switching chunks is not very large, so we can just build one chunk cache across all repositories. This allows the cache to be simpler.
- D5257 needed an offline cache, and used a unique cache structure. Since this one can be built online it can mostly use normal cache code.
- This also supports online appends to the cache.
- Finally, this has a timeout to guarantee a ceiling on the worst case: the worst case is something like a query for a file that has never existed, in a repository which receives exactly 1 commit every time other repositories receive 4095 commits, on a cold cache. If we hit cases like this we can bail after warming the cache up a bit and fall back to asking the VCS for an answer.
This cache isn't perfect, but I believe it will give us substantial gains in the average case. It can often satisfy "average-looking" queries in 4-8ms, and pathological-ish queries in 20ms on my machine; `hg` usually can't even start up in less than 100ms. The major thing that's attractive about this approach is that it does not require anything external or complicated, and will "just work", even producing reasonble improvements for users without APC.
In followups, I'll modify queries to use this cache and see if it holds up in more realistic workloads.
Test Plan:
- Used `bin/repository cache` to examine the behavior of this cache.
- Did some profiling/testing from the web UI using `debug.php`.
- This //appears// to provide a reasonable fast way to issue this query very quickly in the average case, without the various issues that plagued D5257.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, jhurwitz
Maniphest Tasks: T2683
Differential Revision: https://secure.phabricator.com/D9045
Summary:
Ref T4455. This adds a `repository_parents` table which stores `<childCommitID, parentCommitID>` relationships.
For new commits, it is populated when commits are discovered.
For older commits, there's a `bin/repository parents` script to rebuild the data.
Right now, there's no UI suggestion that you should run the script. I haven't come up with a super clean way to do this, and this table will only improve performance for now, so it's not important that we get everyone to run the script right away. I'm just leaving it for the moment, and we can figure out how to tell admins to run it later.
The ultimate goal is to solve T2683, but solving T4455 gets us some stuff anyway (for example, we can serve `diffusion.commitparentsquery` faster out of this cache).
Test Plan:
- Used `bin/repository discover` to discover new commits in Git, SVN and Mercurial repositories.
- Used `bin/repository parents` to rebuild Git and Mercurial repositories (SVN repos just exit with a message).
- Verified that the table appears to be sensible.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: jhurwitz, epriestley
Maniphest Tasks: T4455
Differential Revision: https://secure.phabricator.com/D9044
Summary: Ref T4986. I think this is the last of the easy ones, there are about 10 not-quite-so-trivial ones left.
Test Plan:
- Viewed app results.
- Created panels.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4986
Differential Revision: https://secure.phabricator.com/D9025
Summary: Ref T4986. These are mostly mechanical now, I skipped a couple of slightly tricky ones. Still a bunch to go.
Test Plan:
For each engine:
- Viewed the application;
- created a panel to issue the query.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4986
Differential Revision: https://secure.phabricator.com/D9017
Summary:
This is just a general review of config options, to reduce the amount of damage a rogue administrator (without host access) can do. In particular:
- Fix some typos.
- Lock down some options which would potentially let a rogue administrator do something sketchy.
- Most of the new locks relate to having them register a new service account, then redirect services to their account. This potentially allows them to read email.
- Lock down some general disk stuff, which could be troublesome in combination with other vulnerabilities.
Test Plan:
- Read through config options.
- Tried to think about how to do evil things with each one.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8928
Summary:
Fixes T4917. Currently, if a user doesn't have access to, e.g., Phriction, they still get a checkbox in the search results to search for Wiki Documents. Those results will be filtered anyway, so this is confusing at best.
Instead, bind PHID types to applications. This is a relatively tailored fix; some areas for potential future work:
- Go through every PHID type and bind them all to applications. Vaguely nice to have, but doesn't get us anything for now.
- If no searchable application is installed, we don't show you an error state. This isn't currently possible ("People" is always installed) but in the interest of generality we could throw an exception or something at least.
- The elasticserach thing could probably constrain types to visible types, but we don't have a viewer there easily right now.
Test Plan: Uninstalled Phriction, saw the checkbox vanish.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4917
Differential Revision: https://secure.phabricator.com/D8904
Summary: Fixes T4919. There's some special casing in Diffusion for CAN_PUSH right now, just accommodate that until things get more general.
Test Plan: Viewed a repository edit screen with a custom policy transaction. Clicked the link to view it.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4919
Differential Revision: https://secure.phabricator.com/D8898
Summary:
Sometimes a commit can be huge (like a branch cut in FB www which could have more than half a million files touched). It will generate some emails with size more than 30M, and it will take quite a while to just sort the files and to send out.
Put a hard limit here to avoid such cases. Probably only matters for FB right now, but still even for a small repo with several thousand files, it is a waste to send them all out. Not sure if there is any cleaner way to do it though.
Test Plan: Tried it in FB installtion.
Reviewers: lifeihuang, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8889
Summary: ...also kills off "PhabricatorAuditCommitQuery" and "PhabricatorAuditQuery", by moving the work to "DiffusionCommitQuery". Generally cleans up some code around the joint on this too. Also provides policies for audit requests, which is basically the policy for the underlying commit. Fixes T4715. (For the TODO I added about files, I just grabbed T4713.)
Test Plan:
Audit: verified the three default views all showed the correct things, including highligthing. did some custom queries and got the correct results.
Diffusion: verified "blame view" still worked. verified paths were highlighted for packages i owned.
Home: verified audit boxes showed up with proper commits w/ audits
bin/audit: played around with it via --dry-run and got the right audits back
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: chad, epriestley, Korvin
Maniphest Tasks: T4715
Differential Revision: https://secure.phabricator.com/D8805
Summary: Throwing this up for testing, swapped out all icons in timeline for their font equivelants. Used better icons where I could as well. We should feel free to use more / be fun with the icons when possible since there is no penalty anymore.
Test Plan: I browsed many, not all, timelines in my sandbox and in IE8. Some of these were just swagged, but I'm expecting we'll do more SB testing before landing.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8827
Summary:
Ref T4605. When figuring out how long to wait to update a repository, factor in when it was last pushed. For rarely updated repositories, wait longer between updates.
(A slightly funky thing about this is that empty repos update every 15 seconds, but that seems OK for the moment.)
Test Plan:
Ran `bin/phd debug pulllocal` and saw sensible calculations and output:
```
...
<VERB> PhabricatorRepositoryPullLocalDaemon Last commit to repository "rPOEMS" was 1,239,608 seconds ago; considering a wait of 6,198 seconds before update.
>>> [79] <query> SELECT * FROM `repository` r ORDER BY r.id DESC
<<< [79] <query> 514 us
>>> [80] <query> SELECT * FROM `repository_statusmessage` WHERE statusType = 'needs-update'
<<< [80] <query> 406 us
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rINIH" is not due for an update for 8,754 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rDUCK" is not due for an update for 14 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rMTESTX" is not due for an update for 21,598 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rQWER" is not due for an update for 14 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rBT" is not due for an update for 13 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rSVNX" is not due for an update for 21,598 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rINIG" is not due for an update for 13 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rHGTEST" is not due for an update for 21,598 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rBTX" is not due for an update for 14 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rGX" is not due for an update for 13 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rMTX" is currently updating.
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rPOEMS" is not due for an update for 6,198 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rPHU" is currently updating.
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rSVN" is not due for an update for 21,598 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rPHY" is currently updating.
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rGTEST" is not due for an update for 21,598 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rINIS" is not due for an update for 6,894 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rARCLINT" is not due for an update for 21,599 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rLPHX" is not due for an update for 1,979 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rARC" is not due for an update for 1,824 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rINIHG" is not due for an update for 21,599 second(s).
...
```
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4605
Differential Revision: https://secure.phabricator.com/D8782
