7.1 KiB
7.1 KiB
# $Id$
BOLD = ""
RED = ""
GREEN = ""
ORANGE = ""
BLUE = ""
WHITE = ""
YELLOW = ""
OFF = ""
BOLD = ""
REVERSE = ""
tab_ = " "
nl_ = ""
#==== BUILD MESSAGES ===
define echo_PHASE
@clear
@echo $(BOLD)--------------------------------------------------------------------------------
@echo $(tab_)$(tab_)Executing $(BLUE)$(1)$(WHITE) scripts
@echo $(BOLD)--------------------------------------------------------------------------------
#echo $(WHITE)
endef
define echo_SU_request
@echo $(BOLD)--------------------------------------------------------------------------------
@echo $(BLUE)$@
@echo $(WHITE)ROOT privilege is required to perform a number commands
@echo sudo will request a password to all high privilege cmds to execute correctly
endef
define echo_SULUSER_request
@clear
@echo $(BOLD)--------------------------------------------------------------------------------
@echo $(BOLD)$(BLUE)$@
@echo $(WHITE)You are going to log into the user account $(BOLD)$(YELLOW)$(LUSER)$(OFF)
@echo su requires a password
endef
define echo_CHROOT_request
@clear
@echo $(BOLD)--------------------------------------------------------------------------------
@echo $(BOLD)$(BLUE)$@
@echo $(WHITE)You are going to CHROOT into $(MOUNT_PT) $(BOLD)$(YELLOW)$(LUSER)$(OFF)
@echo a password is required
endef
define echo_message
@echo $(BOLD)--------------------------------------------------------------------------------
@echo $(BOLD)$(1) target $(BLUE)$@$(BOLD)$(WHITE)
endef
#=======================
#=== BUILD FUNCTIONS ===
define remove_existing_dirs
@PKG_PATH=`ls -t $(SRCSDIR)/$(1) | head -n1` && \
ROOT=`tar -tf $$PKG_PATH | head -n1 | sed -e 's@^./@@;s@/.*@@'` && \
rm -rf $(SRCSDIR)/$$ROOT && \
rm -rf $(SRCSDIR)/$${ROOT%-*}-build
endef
define remove_existing_dirs2
@PKG_PATH=`ls -t $(SRC)/$(1) | head -n1` && \
ROOT=`tar -tf $$PKG_PATH | head -n1 | sed -e 's@^./@@;s@/.*@@'` && \
rm -rf $(SRC)/$$ROOT && \
rm -rf $(SRC)/$${ROOT%-*}-build
endef
#==#
define unpack
@cd $(SRCSDIR) && \
tar -xvf `ls -t $(1) | head -n1` > $(PKG_LST)
endef
define unpack2
@cd $(SRC) && \
tar -xvf `ls -t $(1) | head -n1` > $(PKG_LST)
endef
#==#
define get_pkg_root
@ROOT=`head -n1 $(SRCSDIR)/$(PKG_LST) | sed 's@^./@@;s@/.*@@'` && \
if [ "$(1)" != "nouser" ]; then \
echo "export PKGDIR=$(SRCSDIR)/$$ROOT" > envars; \
chown -R $(LUSER) $(SRCSDIR)/$$ROOT; \
else \
echo "export PKGDIR=$(crSRCSDIR)/$$ROOT" > envars; \
fi;
endef
define get_pkg_root2
@ROOT=`head -n1 $(SRC)/$(PKG_LST) | sed 's@^./@@;s@/.*@@'` && \
echo "export PKGDIR=$(SRC)/$$ROOT" > envars
endef
define get_pkg_root_LUSER
@ROOT=`head -n1 $(SRCSDIR)/$(PKG_LST) | sed 's@^./@@;s@/.*@@'` && \
echo "export PKGDIR=$(SRCSDIR)/$$ROOT" > envars
endef
#==#
define remove_build_dirs
@ROOT=`head -n1 $(SRCSDIR)/$(PKG_LST) | sed 's@^./@@;s@/.*@@'` && \
rm -rf $(SRCSDIR)/$$ROOT && \
rm -rf $(SRCSDIR)/$(1)-build
endef
define remove_build_dirs2
@ROOT=`head -n1 $(SRC)/$(PKG_LST) | sed 's@^./@@;s@/.*@@'` && \
rm -rf $(SRC)/$$ROOT && \
rm -rf $(SRC)/$(1)-build
endef
#==#
define housekeeping
@touch $@ && \
sleep .25 && \
echo -e "\n" $(BOLD)Target $(BLUE)$@ $(WHITE)$(BOLD)OK && \
echo --------------------------------------------------------------------------------$(WHITE)
endef
#=======================
#==== FINAL MESSAGES ===
define echo_report
@echo
@echo $(BOLD) The report file $(BLUE)$(1)$(BOLD) has been created
@echo
@echo ${WHITE}Please send the $(BOLD)$(MOUNT_PT)/jhalfs/$(1)$(WHITE)
@echo file to $(BOLD)manuel@linuxfromscratch.org$(WHITE)
@echo
@echo That will help us to keep more accurate SBU and
@echo disk usage values into the book. Thanks.
endef
define echo_finished
@echo $(BOLD)
@echo --------------------------------------------------------------------------------
@echo $(BOLD) Finished the build of $(BLUE)$(1)$(BOLD)
@echo --------------------------------------------------------------------------------
@echo $(tab_)$(tab_)$(RED)W A R N I N G$(BOLD)
@echo --------------------------------------------------------------------------------
@echo
@echo To be able to boot your new system you need to follow
@echo the next steps:$(WHITE)
@echo
@echo $(tab_)- Enter to the chroot using the command found
@echo $(tab_)in the section -Entering the Chroot Environment-
@echo $(tab_)except if building CLFS with METHOD=boot.
@echo
@echo $(tab_)- Set a password for the root user.
@echo
@echo $(tab_)- Edit or create /etc/fstab, /etc/hosts, /etc/sysconfig/clock,
@echo $(tab_)/etc/sysconfig/console, /etc/sysconfig/network,
@echo $(tab_)/etc/sysconfig//network-devices/ifconfig.eth0/ipv4 and
@echo $(tab_)any other configuration file required to suit your needs.
@echo
@echo $(tab_)- Exit from the chroot.
@echo
@echo $(tab_)- Set-up the boot loader, except if building CLFS with METHOD=boot.
@echo $(tab_)You can set-up the host bootloader or the new boot-loader
@echo $(tab_)installed on the new system.
@echo $(tab_)If the last, you must to mount the virtual filesystems, re-enter
@echo $(tab_)the chroot and be sure that /dev is populated with the
@echo $(tab_)required devices before configure the boot-loader. When ready,
@echo $(tab_)exit from the chroot and umount the filesystems
@echo
@echo If you are an experienced LFS user, several of those steps can be
@echo skipped or done in a different way. But then, that is something
@echo that you already know and there is no need to discuss it here.
@echo $(BOLD)
@echo --------------------------------------------------------------------------------
@echo $(tab_)$(tab_)$(GREEN)Have a nice day $(ORANGE):-\)$(BOLD)
@echo --------------------------------------------------------------------------------$(WHITE)
endef
define echo_boot_finished
@echo $(BOLD)
@echo --------------------------------------------------------------------------------
@echo $(BOLD) Finished building a minimal boot system for $(BLUE)$(1)$(BOLD)
@echo --------------------------------------------------------------------------------
@echo $(tab_)$(tab_)$(RED)W A R N I N G$(BOLD)
@echo --------------------------------------------------------------------------------
@echo
@echo The build is not complete. Follow the next steps:$(WHITE)
@echo
@echo $(tab_)- Edit or create $(MOUNT_PT)/etc/fstab
@echo $(tab_) and any other configuration file required to suit your needs.
@echo $(BOLD)
@echo $(BOLD)$(YELLOW)
@echo 1.If it is necessary, transfer the newly created partition to the target machine
@echo 2.Boot the new partition.
@echo 3.Once you are logged in issue the following commands
@echo $(tab_) $(BOLD)cd /jhalfs
@echo $(tab_) $(BOLD)make makesys
@echo The build process should resume. Follow any instructions that appear.
@echo --------------------------------------------------------------------------------
@echo $(tab_)$(tab_)$(GREEN)Have a nice day $(ORANGE):-\)$(BOLD)
@echo --------------------------------------------------------------------------------$(WHITE)
endef